Merge pull request #411 from ludiazv/new-opizero2

Support for Orange pi zero 2 for 6.6 LTS

README.md

@@ -3,9 +3,10 @@ meta-sunxi
 
 Official sunxi OpenEmbedded layer for Allwinner-based boards.
 
-This layer depends on the additional layer:
+This layer depends on the additional layers:
 
-meta-openembedded: git://git.openembedded.org/meta-openembedded
+* [meta-openembedded/meta-oe](http://git.openembedded.org/meta-openembedded/tree/meta-oe)
+* [meta-arm](https://git.yoctoproject.org/meta-arm)
 
 Tested with core-image-base.
 
@@ -14,25 +15,46 @@ Maintainers:
 * Nicolas Aguirre <aguirre.nicolas@gmail.com>
 * Enrico Butera <ebutera@users.sourceforge.net>
 * Sergey Lapin <slapin@ossfans.org>
+* Marek Belisko <marek.belisko@gmail.com>
+
+Community
+===========
+
+You can reach community + ask your question on gitter: https://matrix.to/#/#meta-sunxi:gitter.im
 
 Kernel / U-Boot Version
 ===========
 Most Allwinner devices and hardware are supported in mainline kernel and U-Boot, so this layer builds mainline by default.
+
+Legacy sunxi Kernel / U-Boot
+-----------
+
 There is a custom U-Boot and Kernel version for sunxi devices which includes some special drivers not mainlined.
-These versions are rather old (3.4 for kernel and 2014.04 for U-Boot), but may support more functions and devices than current mainline 
+These versions are rather old (3.4 for kernel and 2014.04 for U-Boot), but may support more functions and devices than current mainline.
 
-If you want to switch back to sunxi versions for some reasons (no device tree available, unsupported hardware), change the file
-/conf/machine/include/sunxi.inc and set 
+If you want to switch back to sunxi versions for some reasons (no device tree available, unsupported hardware), either:
+- change the file conf/machine/include/sunxi.inc to include the following block
+- edit your conf/local.conf to add the following block
 
-	PREFERRED_PROVIDER_u-boot="u-boot-sunxi"
-	PREFERRED_PROVIDER_virtual/bootloader="u-boot-sunxi"
-	PREFERRED_PROVIDER_virtual/kernel="linux-sunxi"
+		PREFERRED_PROVIDER_u-boot="u-boot-sunxi"
+		PREFERRED_PROVIDER_virtual/bootloader="u-boot-sunxi"
+		PREFERRED_PROVIDER_virtual/kernel="linux-sunxi"
+		KERNEL_DEVICETREE = ""
 
 If you already have built the mainline versions it might be necessary to reset the build directories with:
 
-	bitbake -c clean linux
-	bitbake -c clean u-boot
+	bitbake -c clean virtual/kernel virtual/bootloader
 
+Mainline Kernel / U-Boot
+-----------
+
+For mainline kernel we have now support for latest LTS and stable.
+By default we use latest LTS. If you would like to change version please update ```PREFERRED_VERSION_linux-mainline``` in:
+* [conf/machine/include/sunxi.inc](https://github.com/linux-sunxi/meta-sunxi/blob/fa0846c0eb23e3424b89acb4d5a327e921f73497/conf/machine/include/sunxi.inc#L16)
+
+When using mainline kernel ≥ 5.2 it is now possible to use the mainline graphics drivers *lima* and *panfrost*, instead of the *mali* driver provided by ARM. To enable open source mainline graphics support add the following line in your `local.conf`:
+
+    MACHINEOVERRIDES .= ":use-mailine-graphics"
 
 Performance
 ===========

classes/sdcard_image-sunxi.bbclass

@@ -1,115 +0,0 @@
-inherit image_types
-
-#
-# Create an image that can by written onto a SD card using dd.
-# Originally written for rasberrypi adapt for the needs of allwinner sunxi based boards
-#
-# The disk layout used is:
-#
-#    0                      -> 8*1024                           - reserverd
-#    8*1024                 -> 32*1024                          - 
-#    32*1024                -> 2048*1024                        - 
-#    2048*1024              -> BOOT_SPACE                       - bootloader and kernel
-#
-#
-
-# This image depends on the rootfs image
-IMAGE_TYPEDEP_sunxi-sdimg = "${SDIMG_ROOTFS_TYPE}"
-
-# Boot partition volume id
-BOOTDD_VOLUME_ID ?= "${MACHINE}"
-
-# Boot partition size [in KiB]
-BOOT_SPACE ?= "20480"
-
-# First partition begin at sector 2048 : 2048*1024 = 2097152
-IMAGE_ROOTFS_ALIGNMENT = "2048"
-
-# Use an uncompressed ext3 by default as rootfs
-SDIMG_ROOTFS_TYPE ?= "ext3"
-SDIMG_ROOTFS = "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.${SDIMG_ROOTFS_TYPE}"
-
-IMAGE_DEPENDS_sunxi-sdimg += " \
-			parted-native \
-			mtools-native \
-			dosfstools-native \
-			virtual/kernel \
-			virtual/bootloader \
-                        sunxi-board-fex \
-			"
-
-rootfs[depends] += "virtual/kernel:do_deploy sunxi-board-fex:do_deploy"
-
-# SD card image name
-SDIMG = "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.sunxi-sdimg"
-
-IMAGEDATESTAMP = "${@time.strftime('%Y.%m.%d',time.gmtime())}"
-
-IMAGE_CMD_sunxi-sdimg () {
-
-	# Align partitions
-	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
-	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT})
-	SDIMG_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $ROOTFS_SIZE + ${IMAGE_ROOTFS_ALIGNMENT})
-
-	# Initialize sdcard image file
-	dd if=/dev/zero of=${SDIMG} bs=1 count=0 seek=$(expr 1024 \* ${SDIMG_SIZE})
-
-	# Create partition table
-	parted -s ${SDIMG} mklabel msdos
-	# Create boot partition and mark it as bootable
-	parted -s ${SDIMG} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT})
-	parted -s ${SDIMG} set 1 boot on
-	# Create rootfs partition
-	parted -s ${SDIMG} unit KiB mkpart primary ext2 $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT}) $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT} \+ ${ROOTFS_SIZE})
-	parted ${SDIMG} print
-
-	# Create a vfat image with boot files
-	BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }')
-	rm -f ${WORKDIR}/boot.img
-	mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
-
-	mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::uImage
-
-	# Copy device tree file
-	if test -n "${KERNEL_DEVICETREE}"; then
-		for DTS_FILE in ${KERNEL_DEVICETREE}; do
-			DTS_BASE_NAME=`basename ${DTS_FILE} | awk -F "." '{print $1}'`
-			if [ -e "${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb" ]; then
-				kernel_bin="`readlink ${KERNEL_IMAGETYPE}-${MACHINE}.bin`"
-				kernel_bin_for_dtb="`readlink ${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb | sed "s,$DTS_BASE_NAME,${MACHINE},g;s,\.dtb$,.bin,g"`"
-				if [ $kernel_bin = $kernel_bin_for_dtb ]; then
-					mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb ::/${DTS_BASE_NAME}.dtb
-				fi
-			fi
-		done
-	fi
-
-	if [ -e "${DEPLOY_DIR_IMAGE}/fex.bin" ]
-	then
-		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/fex.bin ::script.bin
-	fi
-	if [ -e "${DEPLOY_DIR_IMAGE}/boot.scr" ]
-	then
-		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/boot.scr ::boot.scr
-	fi
-
-
-	# Add stamp file
-	echo "${IMAGE_NAME}-${IMAGEDATESTAMP}" > ${WORKDIR}/image-version-info
-	mcopy -i ${WORKDIR}/boot.img -v ${WORKDIR}//image-version-info ::
-
-	# Burn Partitions
-	dd if=${WORKDIR}/boot.img of=${SDIMG} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
-	# If SDIMG_ROOTFS_TYPE is a .xz file use xzcat
-	if echo "${SDIMG_ROOTFS_TYPE}" | egrep -q "*\.xz"
-	then
-		xzcat ${SDIMG_ROOTFS} | dd of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
-	else
-		dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
-	fi
-
-	#write u-boot and spl at the beginint of sdcard in one shot
-	dd if=${DEPLOY_DIR_IMAGE}/u-boot-sunxi-with-spl.bin of=${SDIMG} bs=1024 seek=8 conv=notrunc
-
-}

conf/layer.conf

@@ -4,6 +4,14 @@ BBPATH .= ":${LAYERDIR}"
 # We have a recipes directory, add to BBFILES
 BBFILES += "${LAYERDIR}/recipes*/*/*.bb ${LAYERDIR}/recipes*/*/*.bbappend"
 
-BBFILE_COLLECTIONS += "meta-sunxi"
-BBFILE_PATTERN_meta-sunxi := "^${LAYERDIR}/"
-BBFILE_PRIORITY_meta-sunxi = "10"
+BBFILE_COLLECTIONS += "sunxi"
+BBFILE_PATTERN_sunxi := "^${LAYERDIR}/"
+BBFILE_PRIORITY_sunxi = "10"
+
+# This should only be incremented on significant changes that will
+# cause compatibility issues with other layers
+LAYERVERSION_sunxi = "1"
+
+LAYERDEPENDS_sunxi = "core meta-python meta-arm"
+
+LAYERSERIES_COMPAT_sunxi = "styhead"

conf/machine/bananapi-m2-zero.conf

@@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: bananapi-m2-zero
+#@DESCRIPTION: Machine configuration for the Banana Pi M2 Zero, base on Allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+require conf/machine/include/hardware/ap6212a.inc
+
+KERNEL_DEVICETREE = "sun8i-h2-plus-bananapi-m2-zero.dtb"
+UBOOT_MACHINE = "bananapi_m2_zero_defconfig"
+

conf/machine/bananapi-m2m.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: bananapi-m2m
+#@DESCRIPTION: Machine configuration for the Banana Pi M2M, base on Allwinner H8 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-r16-bananapi-m2m.dtb"
+UBOOT_MACHINE = "Bananapi_m2m_defconfig"
+

conf/machine/bananapi-m2plus.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: bananapi-m2plus
+#@DESCRIPTION: Machine configuration for the Banana Pi M2+, base on Allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-bananapi-m2-plus.dtb"
+UBOOT_MACHINE = "bananapi_m2_plus_h3_defconfig"
+

conf/machine/bananapi-m64.conf

@@ -0,0 +1,8 @@
+#@TYPE: Machine
+#@NAME: pine64-plus
+#@DESCRIPTION: Machine configuration for the pine64-plus, based on Allwinner A64 CPU
+
+require conf/machine/include/sun50i.inc
+
+KERNEL_DEVICETREE = "allwinner/sun50i-a64-bananapi-m64.dtb"
+UBOOT_MACHINE = "bananapi_m64_defconfig"

conf/machine/include/hardware/ap6212a.inc

@@ -0,0 +1,5 @@
+# Include for boards with AMPAK 6212A Wifi / Bluetooth module
+# https://linux-sunxi.org/Wifi#Ampak
+
+MACHINE_EXTRA_RRECOMMENDS:append = " kernel-module-brcmfmac"
+MACHINE_EXTRA_RDEPENDS:append = " linux-firmware-bcm43430"

conf/machine/include/sun4i.inc

@@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/tune-cortexa8.inc
+require conf/machine/include/arm/armv7a/tune-cortexa8.inc
 
 SOC_FAMILY = "sun4i"

conf/machine/include/sun50i-h6.inc

@@ -0,0 +1,8 @@
+require conf/machine/include/sunxi64.inc
+
+DEFAULTTUNE ?= "cortexa53-crypto"
+require conf/machine/include/arm/armv8a/tune-cortexa53.inc
+
+MACHINEOVERRIDES =. "sun50i:"
+
+SOC_FAMILY = "sun50i-h6"

conf/machine/include/sun50i-h616.inc

@@ -0,0 +1,8 @@
+require conf/machine/include/sunxi64.inc
+
+DEFAULTTUNE ?= "cortexa53-crypto"
+require conf/machine/include/arm/armv8a/tune-cortexa53.inc
+
+MACHINEOVERRIDES =. "sun50i:"
+
+SOC_FAMILY = "sun50i-h616"

conf/machine/include/sun50i.inc

@@ -0,0 +1,6 @@
+require conf/machine/include/sunxi64.inc
+
+DEFAULTTUNE ?= "cortexa53-crypto"
+require conf/machine/include/arm/armv8a/tune-cortexa53.inc
+
+SOC_FAMILY = "sun50i"

conf/machine/include/sun5i.inc

@@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/tune-cortexa8.inc
+require conf/machine/include/arm/armv7a/tune-cortexa8.inc
 
 SOC_FAMILY = "sun5i"

conf/machine/include/sun7i.inc

@@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/tune-cortexa7.inc
+require conf/machine/include/arm/armv7a/tune-cortexa7.inc
 
 SOC_FAMILY = "sun7i"

conf/machine/include/sun8i.inc

@@ -0,0 +1,5 @@
+require conf/machine/include/sunxi.inc
+require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/arm/armv7a/tune-cortexa7.inc
+
+SOC_FAMILY = "sun8i"

conf/machine/include/sunxi-mali-driver.inc

@@ -0,0 +1,15 @@
+PREFERRED_PROVIDER_virtual/mesa ?= "mesa-gl"
+PREFERRED_PROVIDER_virtual/libgl ?= "mesa-gl"
+PREFERRED_PROVIDER_virtual/libgles1 ?= "sunxi-mali"
+PREFERRED_PROVIDER_virtual/libgles2 ?= "sunxi-mali"
+PREFERRED_PROVIDER_virtual/egl ?= "sunxi-mali"
+
+PACKAGECONFIG:remove:pn-xserver-xorg = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'glamor', '', d)}"
+
+XSERVER += "sunxi-mali \
+            sunxi-mali-dev"
+
+MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "\
+ kernel-module-mali \
+ kernel-module-mali-drm \
+  "

conf/machine/include/sunxi-mali.inc

@@ -1,13 +1,5 @@
-PREFERRED_PROVIDER_virtual/mesa ?= "mesa-gl"
-PREFERRED_PROVIDER_virtual/libgl ?= "mesa-gl"
-PREFERRED_PROVIDER_virtual/libgles1 ?= "sunxi-mali"
-PREFERRED_PROVIDER_virtual/libgles2 ?= "sunxi-mali"
-PREFERRED_PROVIDER_virtual/egl ?= "sunxi-mali"
-
-XSERVER += "sunxi-mali \
-            sunxi-mali-dev"
-
-MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "\
- kernel-module-mali \
- kernel-module-mali-drm \
-  "
+# The "sunxi-mailine-graphics-drivers.inc" doesn't exist, but it can be created
+# in the future if needed.  Using include directive ensures build doesn't fail
+# if .inc file doesn't exist:
+# https://www.yoctoproject.org/pipermail/yocto/2019-August/046484.html
+include ${@'sunxi-mali-driver.inc' if 'use-mailine-graphics' not in d.getVar("MACHINEOVERRIDES").split(":") else 'sunxi-mailine-graphics-drivers.inc' }

conf/machine/include/sunxi.inc

@@ -1,32 +1,47 @@
 SOC_FAMILY ??= ""
 include conf/machine/include/soc-family.inc
 
+MACHINEOVERRIDES =. "sunxi:"
+
 # Sub-architecture support
 MACHINE_SOCARCH_SUFFIX ?= ""
 MACHINE_SOCARCH_SUFFIX_sun4i = "-sun4i"
 
 PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
 XSERVER = "xserver-xorg \
-           xf86-video-fbturbo \
            xf86-input-evdev \
            xf86-input-mouse \
            xf86-input-keyboard"
 
-PREFERRED_PROVIDER_virtual/kernel ?= "linux"
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
+PREFERRED_VERSION_linux-mainline ?= "6.6.%"
 PREFERRED_PROVIDER_u-boot ?= "u-boot"
 PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
 
 KERNEL_IMAGETYPE ?= "uImage"
 
-IMAGE_CLASSES += "sdcard_image-sunxi"
-IMAGE_FSTYPES += "ext3 tar.gz sunxi-sdimg"
+IMAGE_FSTYPES += "ext3 tar.gz wic.gz wic.bmap"
 
 MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"
 
 UBOOT_LOCALVERSION = "-g${@d.getVar('SRCPV', True).partition('+')[2][0:7]}"
 
 UBOOT_ENTRYPOINT ?= "0x40008000"
-UBOOT_LOADADDRESS ?= "0x400080OB00"
 
-SERIAL_CONSOLE ?= "115200 ttyS0"
+SPL_BINARY ?= "u-boot-sunxi-with-spl.bin"
+
+SERIAL_CONSOLES ?= "115200;ttyS0"
 MACHINE_FEATURES ?= "alsa apm keyboard rtc serial screen usbgadget usbhost vfat"
+
+# Mimic the sdcard_image-sunxi.bbclass
+# image-version-info file was also generated and installed to boot partition,
+# but it is missing here - can be added somehow (how?) if required
+SUNXI_FEX_FILE ?= " "
+SUNXI_BOOT_SPACE ?= "40"
+IMAGE_BOOT_FILES ?= "${KERNEL_IMAGETYPE} boot.scr"
+# ship fex file for sunxi kernel, devicetree file for mainline kernel
+IMAGE_BOOT_FILES += "${@bb.utils.contains('PREFERRED_PROVIDER_virtual/kernel', 'linux-sunxi', '${SUNXI_FEX_FILE}', '${KERNEL_DEVICETREE}', d)}"
+WKS_FILES ?= "sunxi-sdcard-image.wks.in"
+WKS_FILE_DEPENDS ?= "virtual/kernel u-boot"
+# in case of sunxi kernel, sunxi-board-fex must be built prior wic image assembly
+WKS_FILE_DEPENDS += " ${@bb.utils.contains('PREFERRED_PROVIDER_virtual/kernel', 'linux-sunxi', 'sunxi-board-fex', '', d)}"

conf/machine/include/sunxi64.inc

@@ -0,0 +1,52 @@
+SOC_FAMILY ??= ""
+include conf/machine/include/soc-family.inc
+
+MACHINEOVERRIDES =. "sunxi:sunxi64:"
+
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
+PREFERRED_VERSION_linux-mainline ?= "6.6.%"
+PREFERRED_PROVIDER_u-boot ?= "u-boot"
+PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
+
+KERNEL_IMAGETYPE ?= "Image"
+
+IMAGE_FSTYPES += "ext4 tar.gz wic.gz wic.bmap"
+
+MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"
+
+UBOOT_LOCALVERSION = "-g${@d.getVar('SRCPV', True).partition('+')[2][0:7]}"
+
+UBOOT_ENTRYPOINT ?= "0x40008000"
+UBOOT_LOADADDRESS ?= "0x400080OB00"
+
+#UBOOT_BINARY ?= "u-boot.itb"
+SPL_BINARY ?= "u-boot-sunxi-with-spl.bin"
+
+SERIAL_CONSOLES ?= "115200;ttyS0"
+MACHINE_FEATURES ?= "alsa apm keyboard rtc serial screen usbgadget usbhost vfat"
+
+# arm64 dbts are under <vendor>/dts but is deployed under DEPLOYDIR 
+do_fix_device_tree_location() {
+
+    for kdt in ${KERNEL_DEVICETREE}
+    do
+        local dbt_dir=$(dirname ${kdt})
+        if [ "." != "${dbt_dir}" ] ; then
+            local dbt=$(basename ${kdt})
+            local dst=${DEPLOY_DIR_IMAGE}/${dbt_dir}/${dbt}
+            if [ ! -f ${dst} ] ; then
+                mkdir -p ${DEPLOY_DIR_IMAGE}/$dbt_dir
+                ln -s ${DEPLOY_DIR_IMAGE}/${dbt} ${dst}
+            fi
+        fi
+    done
+}
+
+
+addtask do_fix_device_tree_location after do_write_wks_template before do_image_wic
+
+SUNXI_BOOT_SPACE ?= "40"
+IMAGE_BOOT_FILES ?= "${KERNEL_IMAGETYPE} boot.scr ${KERNEL_DEVICETREE}"
+
+WKS_FILES ?= "sunxi-sdcard-image.wks.in"
+WKS_FILE_DEPENDS ?= "virtual/kernel u-boot"

conf/machine/lamobo-r1.conf

@@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: Lamobo R1
+#@DESCRIPTION: Machine configuration for the lamobo r1, based on allwinner A20 CPU http://bananapi.org/
+
+require conf/machine/include/sun7i.inc
+
+MACHINE_EXTRA_RRECOMMENDS = " kernel-modules kernel-devicetree"
+KERNEL_DEVICETREE = "sun7i-a20-lamobo-r1.dtb"
+UBOOT_MACHINE = "Lamobo_R1_config"
+SUNXI_FEX_FILE = "sys_config/a20/lamobo-r1.fex"

conf/machine/licheepi-zero.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: licheepi-zero
+#@DESCRIPTION: Machine configuration for the licheepi-zero, based on allwinner V3s CPU
+
+require conf/machine/include/sun8i.inc
+
+
+UBOOT_MACHINE = "LicheePi_Zero_defconfig"
+KERNEL_DEVICETREE = "sun8i-v3s-licheepi-zero.dtb"

conf/machine/mangopi-mq-t-t113.conf

@@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: MangoPi MQ-R T113-S3
+#@DESCRIPTION: Machine configuration for the MangoPi MQ-R, based on the Allwinner T113-S3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-t113s-mangopi-mq-r-t113.dtb"
+KERNEL_IMAGETYPE = "zImage"
+
+UBOOT_MACHINE = "mangopi_mq_r_defconfig"

conf/machine/marsboard-a10.conf

@@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: HAOYU Electronics MarsBoard A10
+#@DESCRIPTION: Machine configuration for the HAOYU Electronics MarsBoard A10, based on Allwinner A10 CPU
+#https://linux-sunxi.org/MarsBoard_A10
+
+require conf/machine/include/sun4i.inc
+
+KERNEL_DEVICETREE = "sun4i-a10-marsboard.dtb"
+UBOOT_MACHINE = "Marsboard_A10_config"
+SUNXI_FEX_FILE = "sys_config/a10/marsboard_a10.fex"

conf/machine/nanopi-m1-plus.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: nanopi M1 Plus
+#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo, based on the Allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-nanopi-m1-plus.dtb"
+UBOOT_MACHINE = "nanopi_m1_plus_defconfig"
+

conf/machine/nanopi-m1.conf

@@ -0,0 +1,8 @@
+#@TYPE: Machine
+#@NAME: NanoPi M1
+#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo, based on #the Allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-nanopi-m1.dtb"
+UBOOT_MACHINE = "nanopi_m1_defconfig"

conf/machine/nanopi-neo-air.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: nanopi-neo-air
+#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo Air, based
+# on the Allwinner H3 CPU.
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo-air.dtb"
+UBOOT_MACHINE = "nanopi_neo_air_defconfig"

conf/machine/nanopi-neo-plus2.conf

@@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: nanopi-neo-plus2
+#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo Plus2, based
+# on the Allwinner H5 SoC.
+
+require conf/machine/include/sun50i.inc
+require conf/machine/include/hardware/ap6212a.inc
+
+KERNEL_DEVICETREE = "allwinner/sun50i-h5-nanopi-neo-plus2.dtb"
+UBOOT_MACHINE = "nanopi_neo_plus2_defconfig"

conf/machine/nanopi-neo.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: nanopi-neo
+#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo, based on the Allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo.dtb"
+UBOOT_MACHINE = "nanopi_neo_defconfig"
+

conf/machine/nanopi-neo2.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: nanopi-neo2
+#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo 2, based on
+# the Allwinner H5 SoC.
+
+require conf/machine/include/sun50i.inc
+
+KERNEL_DEVICETREE = "allwinner/sun50i-h5-nanopi-neo2.dtb"
+UBOOT_MACHINE = "nanopi_neo2_defconfig"

conf/machine/nanopi-r1.conf

@@ -0,0 +1,8 @@
+#@TYPE: Machine
+#@NAME: NanoPi R1
+#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi R1, based on #the Allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-nanopi-r1.dtb"
+UBOOT_MACHINE = "nanopi_r1_defconfig"

conf/machine/olinuxino-a20lime2-emmc.conf

@@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: Olimex A20-OLinuXino Lime2 Board with 4GB eMMC
+#@DESCRIPTION: Machine configuration for the Olimex A20-OLinuXino Lime2 Board with 4GB eMMC, based on Allwinner A20 CPU
+#https://github.com/OLIMEX/OLINUXINO
+
+require conf/machine/include/sun7i.inc
+
+KERNEL_DEVICETREE = "sun7i-a20-olinuxino-lime2-emmc.dtb"
+UBOOT_MACHINE = "A20-OLinuXino-Lime2-eMMC_config"
+SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_lime2.fex"

conf/machine/olinuxino-a20lime2.conf

@@ -6,5 +6,5 @@
 require conf/machine/include/sun7i.inc
 
 KERNEL_DEVICETREE = "sun7i-a20-olinuxino-lime2.dtb"
-UBOOT_MACHINE = "A20-OLinuXino_Lime2_config"
-SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_lime2.fex"
+UBOOT_MACHINE = "A20-OLinuXino-Lime2_config"
+SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_lime2.fex"

conf/machine/olinuxino-a20som.conf

@@ -5,5 +5,6 @@
 
 require conf/machine/include/sun7i.inc
 
-UBOOT_MACHINE = "Olimex_A20-SOM_config"
-SUNXI_FEX_FILE = "sys_config/a20/olimex_a20_som.fex"
+KERNEL_DEVICETREE = "sun7i-a20-olimex-som-evb.dtb"
+UBOOT_MACHINE = "A20-Olimex-SOM-EVB_config"
+SUNXI_FEX_FILE = "sys_config/a20/olimex_a20_som.fex"

conf/machine/olinuxino-a64.conf

@@ -0,0 +1,13 @@
+#@TYPE: Machine
+#@NAME: Olimex A64-OLinuXino Board
+#@DESCRIPTION: Machine configuration for the Olimex A64-OLinuXino Board, based on Allwinner A64 CPU
+#https://github.com/OLIMEX/OLINUXINO
+
+require conf/machine/include/sun50i.inc
+
+PREFFERED_VERSION_u-boot = "v2018.09%"
+
+MACHINE_EXTRA_RRECOMMENDS += " linux-firmware-rtl8723"
+
+KERNEL_DEVICETREE = "allwinner/sun50i-a64-olinuxino.dtb"
+UBOOT_MACHINE = "a64-olinuxino_defconfig"

conf/machine/orange-pi-3lts.conf

@@ -0,0 +1,28 @@
+#@TYPE: Machine
+#@NAME: orange-pi-3lts
+#@DESCRIPTION: Machine configuration for the Orange Pi 3 LTS , based on Allwinner H6 CPU
+# Note: Some boards have faulty RTC a fix is included by default
+# a workarround in the dts ins include by default but in can removed adding
+# KERNEL_FEATURES:remove = " bsp/orange-pi-3lts/fix-rtc.scc" to local.conf
+
+require conf/machine/include/sun50i-h6.inc
+
+KERNEL_DEVICETREE = "allwinner/sun50i-h6-orangepi-3-lts.dtb"
+UBOOT_MACHINE = "orangepi_3_lts_defconfig"
+
+SPL_BINARY = "u-boot-sunxi-with-spl.bin"
+
+# as for now neither graphics nor audio is supported
+MACHINE_FEATURES:remove = " x11 alsa rtc"
+MACHINE_FEATURES:append = " bluetooth wifi"
+
+# fiwrware needed for wifi + bt
+MACHINE_EXTRA_RRECOMMENDS += " uwe5622-firmware"
+
+# Load modules for wifi & bt
+# Note: fo wifi a custom hci attach userspace sofware is needed that is not included in the layer
+KERNEL_MODULE_AUTOLOAD += " sprdwl_ng sprdbt_tty "
+
+
+
+

conf/machine/orange-pi-lite.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: orange-pi-lite
+#@DESCRIPTION: Machine configuration for the orange-pi-lite, based on Allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-orangepi-lite.dtb"
+UBOOT_MACHINE = "orangepi_lite_defconfig"
+

conf/machine/orange-pi-one-plus.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: orange-pi-one-plus
+#@DESCRIPTION: Machine configuration for the Orange Pi One Plus, based on Allwinner H6 CPU
+
+
+require conf/machine/include/sun50i-h6.inc
+
+KERNEL_DEVICETREE = "allwinner/sun50i-h6-orangepi-one-plus.dtb"
+UBOOT_MACHINE = "orangepi_one_plus_defconfig"

conf/machine/orange-pi-one.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: orange-pi-one
+#@DESCRIPTION: Machine configuration for the orange-pi-one, base on allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-orangepi-one.dtb"
+UBOOT_MACHINE = "orangepi_one_defconfig"
+

conf/machine/orange-pi-pc-plus.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: orange-pi-pc-plus
+#@DESCRIPTION: Machine configuration for the orange-pi-pc-plus, base on allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc-plus.dtb"
+UBOOT_MACHINE = "orangepi_pc_plus_defconfig"
+

conf/machine/orange-pi-pc.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: orange-pi-one
+#@DESCRIPTION: Machine configuration for the orange-pi-one, base on allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc.dtb"
+UBOOT_MACHINE = "orangepi_pc_defconfig"
+

conf/machine/orange-pi-pc2.conf

@@ -0,0 +1,8 @@
+#@TYPE: Machine
+#@NAME: orangepi-pc2
+#@DESCRIPTION: Machine configuration for the orangepi-pc2, based on Allwinner A64 CPU
+
+require conf/machine/include/sun50i.inc
+
+KERNEL_DEVICETREE = "allwinner/sun50i-h5-orangepi-pc2.dtb"
+UBOOT_MACHINE = "orangepi_pc2_defconfig"

conf/machine/orange-pi-prime.conf

@@ -0,0 +1,12 @@
+#@TYPE: Machine
+#@NAME: orange-pi-prime
+#@DESCRIPTION: Machine configuration for the orange-pi-prime, base on Allwinner H5 CPU
+
+require conf/machine/include/sun50i.inc
+require conf/machine/include/hardware/ap6212a.inc
+
+KERNEL_DEVICETREE = "allwinner/sun50i-h5-orangepi-prime.dtb"
+UBOOT_MACHINE = "orangepi_prime_defconfig"
+
+MACHINE_FEATURES:append = " bluetooth wifi"
+MACHINE_EXTRA_RRECOMMENDS:append = " linux-firmware-rtl8723"

conf/machine/orange-pi-r1.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: orange-pi-r1
+#@DESCRIPTION: Machine configuration for the orange-pi-r1, base on allwinner H2+ CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h2-plus-orangepi-r1.dtb"
+UBOOT_MACHINE = "orangepi_r1_defconfig"
+

conf/machine/orange-pi-zero-plus2-h3.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: orange-pi-zero-plus2-h3
+#@DESCRIPTION: Machine configuration for the orange-pi-zero-plus2, based on Allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+require conf/machine/include/hardware/ap6212a.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-orangepi-zero-plus2.dtb"
+UBOOT_MACHINE = "orangepi_zero_plus2_h3_defconfig"

conf/machine/orange-pi-zero-plus2.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: orange-pi-zero-plus2
+#@DESCRIPTION: Machine configuration for the orange-pi-zero-plus2, base on Allwinner H5 CPU
+
+require conf/machine/include/sun50i.inc
+require conf/machine/include/hardware/ap6212a.inc
+
+KERNEL_DEVICETREE = "allwinner/sun50i-h5-orangepi-zero-plus2.dtb"
+UBOOT_MACHINE = "orangepi_zero_plus2_defconfig"

conf/machine/orange-pi-zero.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: orange-pi-zero
+#@DESCRIPTION: Machine configuration for the orange-pi-zero, based on Allwinner H2 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h2-plus-orangepi-zero.dtb"
+UBOOT_MACHINE = "orangepi_zero_defconfig"
+

conf/machine/orange-pi-zero2.conf

@@ -0,0 +1,21 @@
+#@TYPE: Machine
+#@NAME: orange-pi-zero-2
+#@DESCRIPTION: Machine configuration for the orange-pi-zero-2, based on Allwinner H616 CPU
+
+require conf/machine/include/sun50i-h616.inc
+
+KERNEL_DEVICETREE = "allwinner/sun50i-h616-orangepi-zero2.dtb"
+UBOOT_MACHINE = "orangepi_zero2_defconfig"
+
+SPL_BINARY = "u-boot-sunxi-with-spl.bin"
+
+# as for now neither graphics nor audio is supported
+MACHINE_FEATURES:remove = "alsa x11"
+MACHINE_FEATURES:append = "bluetooth wifi"
+
+MACHINE_EXTRA_RRECOMMENDS = "uwe5622-firmware"
+
+# Load modules for wifi & bt
+# Note: fo wifi a custom hci attach userspace sofware is needed that is not included in the layer
+KERNEL_MODULE_AUTOLOAD += " sprdwl_ng sprdbt_tty "
+

conf/machine/pcduino.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: pcduino-lite-wifi
+#@DESCRIPTION: Machine configuration for the pcDuino-Lite-Wifi, base on allwinner a10 CPU
+
+require conf/machine/include/sun4i.inc
+
+KERNEL_DEVICETREE = "sun4i-a10-pcduino.dtb"
+UBOOT_MACHINE = "Linksprite_pcDuino_defconfig"
+SUNXI_FEX_FILE = "sys_config/a10/pcduino.fex"

conf/machine/pcduino3.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: Linksprite A20-pcduino3 Board
+#@DESCRIPTION: Machine configuration for the pcDuino 3, based on Allwinner A20 CPU
+
+require conf/machine/include/sun7i.inc
+
+KERNEL_DEVICETREE = "sun7i-a20-pcduino3.dtb"
+UBOOT_MACHINE = "Linksprite_pcDuino3_defconfig"
+SUNXI_FEX_FILE = "sys_config/a20/linksprite_pcduino3.fex"

conf/machine/pine64-plus.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: pine64-plus
+#@DESCRIPTION: Machine configuration for the pine64-plus, based on Allwinner A64 CPU
+
+
+require conf/machine/include/sun50i.inc
+
+KERNEL_DEVICETREE = "allwinner/sun50i-a64-pine64-plus.dtb"
+UBOOT_MACHINE = "pine64_plus_defconfig"

recipes-bsp/sunxi-board-fex/sunxi-board-fex.bb

@@ -9,9 +9,9 @@ PR = "r0"
 
 COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
 
-SRC_URI = "git://github.com/linux-sunxi/sunxi-boards.git;protocol=git"
+SRC_URI = "git://github.com/linux-sunxi/sunxi-boards.git;protocol=https;branch=master"
 # Increase PV with SRCREV change
-SRCREV = "bf02cb81d1fe5996758322dc74e66808c1c7ad38"
+SRCREV = "af5f938ea14a3614d35ad3d9ab51a5d392117444"
 
 S = "${WORKDIR}/git"
 

recipes-bsp/trusted-firmware-a/trusted-firmware-a_%.bbappend

@@ -0,0 +1,7 @@
+COMPATIBLE_MACHINE:sunxi = "(sun50i|sun50i-h616|sun50i-h6)"
+
+TFA_PLATFORM:sun50i = "sun50i_a64"
+TFA_PLATFORM:sun50i-h6 = "sun50i_h6"
+TFA_PLATFORM:sun50i-h616 = "sun50i_h616"
+
+TFA_BUILD_TARGET:sunxi = "bl31"

recipes-bsp/u-boot/files/0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch

@@ -0,0 +1,21 @@
+From 6a64d90ca4d976c16a2e102dbad0848e4d29776c Mon Sep 17 00:00:00 2001
+From: Florin Sarbu <florin@resin.io>
+Date: Wed, 12 Sep 2018 14:22:49 +0200
+Subject: [PATCH] nanopi_neo_air_defconfig: Enable eMMC support
+
+Upstream-Status: Pending
+Signed-off-by: Florin Sarbu <florin@resin.io>
+
+---
+ configs/nanopi_neo_air_defconfig | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/configs/nanopi_neo_air_defconfig b/configs/nanopi_neo_air_defconfig
+index 806d95c1cc..8899cc3a15 100644
+--- a/configs/nanopi_neo_air_defconfig
++++ b/configs/nanopi_neo_air_defconfig
+@@ -9,3 +9,4 @@ CONFIG_DRAM_CLK=408
+ CONFIG_CONSOLE_MUX=y
+ CONFIG_USB_EHCI_HCD=y
+ CONFIG_USB_OHCI_HCD=y
++CONFIG_MMC_SUNXI_SLOT_EXTRA=2

recipes-bsp/u-boot/files/0002-Added-nanopi-r1-board-support.patch

@@ -0,0 +1,42 @@
+From 767a05572ef5b93c2e157749b1754cbe261ee43d Mon Sep 17 00:00:00 2001
+From: Marek Belisko <marek.belisko@open-nandra.com>
+Date: Fri, 8 Apr 2022 11:33:53 +0200
+Subject: [PATCH] Added nanopi-r1 board support
+
+Patch taken from : https://github.com/armbian/build/blob/master/patch/u-boot/u-boot-sunxi/add-nanopi-r1-and-duo2.patch
+
+Upstream-Status: Pending
+
+Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
+---
+diff --git a/configs/nanopi_r1_defconfig b/configs/nanopi_r1_defconfig
+new file mode 100644
+index 0000000..e028b41
+--- /dev/null
++++ b/configs/nanopi_r1_defconfig
+@@ -0,0 +1,22 @@
++CONFIG_ARM=y
++CONFIG_ARCH_SUNXI=y
++CONFIG_SPL=y
++CONFIG_MACH_SUN8I_H3=y
++CONFIG_DRAM_CLK=408
++CONFIG_DRAM_ZQ=3881979
++CONFIG_DRAM_ODT_EN=y
++CONFIG_MACPWR="PD6"
++# CONFIG_VIDEO_DE2 is not set
++CONFIG_NR_DRAM_BANKS=1
++# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
++CONFIG_CONSOLE_MUX=y
++CONFIG_SYS_CLK_FREQ=480000000
++# CONFIG_CMD_FLASH is not set
++# CONFIG_SPL_DOS_PARTITION is not set
++# CONFIG_SPL_EFI_PARTITION is not set
++CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-r1"
++CONFIG_SUN8I_EMAC=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_OHCI_HCD=y
++CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
++CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+-- 
+2.7.4
+

recipes-bsp/u-boot/files/0003-sunxi-H6-Enable-Ethernet-on-Orange-Pi-One-Plus.patch

@@ -0,0 +1,58 @@
+From: Anne Macedo <retpolanne@posteo.net>
+Date: Tue, 11 Jul 2023 00:39:58 +0000
+Subject: [PATCH] sunxi: H6: Enable Ethernet on Orange Pi One Plus
+
+Enable Ethernet on Orange Pi One Plus by using the correct phy for
+Realtek RTL8211E instead of the Generic One. Also use CONFIG_MACPWR to
+turn on ethernet on startup.
+
+After this patch is applied, a few issues can be seen:
+
+- there's still a PHY reset timed out error that doesn't seem to cause
+  any impacts to the overall connection
+
+- sometimes the emac driver times out after reset (yellow LED turns on
+  and never blinks)
+
+For future patches: for now, CONFIG_MACPWR is the only way to enable
+Ethernet on boot. There's already code on the dts for using the 3v3-gmac
+regulator. However, it is not probed on boot, so it only starts after a
+"regulator status" command is issued.
+
+More details about the troubleshooting on [1].
+
+Upstream-Status: Submitted
+
+[1] https://lore.kernel.org/u-boot/4wsvwgy56e2xfgtvioru2tf2ofkqprlts36qggivxogww6pn5j@4jk63zxhzhag/
+
+Signed-off-by: Anne Macedo <retpolanne@posteo.net>
+---
+ arch/arm/dts/sun50i-h6-orangepi-one-plus.dts | 2 +-
+ configs/orangepi_one_plus_defconfig          | 4 ++++
+ 2 files changed, 5 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts b/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
+index 29a081e72a..6427c58f8a 100644
+--- a/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
++++ b/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
+@@ -37,7 +37,7 @@
+ 
+ &mdio {
+ 	ext_rgmii_phy: ethernet-phy@1 {
+-		compatible = "ethernet-phy-ieee802.3-c22";
++		compatible = "ethernet-phy-id001c.c915", "ethernet-phy-ieee802.3-c22" ;
+ 		reg = <1>;
+ 	};
+ };
+diff --git a/configs/orangepi_one_plus_defconfig b/configs/orangepi_one_plus_defconfig
+index aa5f540eb1..a1835492db 100644
+--- a/configs/orangepi_one_plus_defconfig
++++ b/configs/orangepi_one_plus_defconfig
+@@ -8,3 +8,7 @@ CONFIG_SUNXI_DRAM_H6_LPDDR3=y
+ # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+ CONFIG_USB_EHCI_HCD=y
+ CONFIG_USB_OHCI_HCD=y
++CONFIG_SUN8I_EMAC=y
++CONFIG_PHY_REALTEK=y
++CONFIG_PHY_ETHERNET_ID=y
++CONFIG_MACPWR="PD6"

recipes-bsp/u-boot/files/0004-OrangePi-3-LTS-support.patch

@@ -0,0 +1,421 @@
+From 9966dda20246285abf8b417bd251d5a4bea3e423 Mon Sep 17 00:00:00 2001
+From: Juliano Dorigão <jdorigao@gmail.com>
+Date: Fri, 3 Mar 2023 16:11:30 -0400
+Subject: [PATCH] OrangePi 3 LTS support
+
+Upstream-Status: Pending
+---
+ arch/arm/dts/Makefile                     |   1 +
+ arch/arm/dts/sun50i-h6-orangepi-3-lts.dts | 361 ++++++++++++++++++++++
+ configs/orangepi_3_lts_defconfig          |  19 ++
+ 3 files changed, 381 insertions(+)
+ create mode 100644 arch/arm/dts/sun50i-h6-orangepi-3-lts.dts
+ create mode 100644 configs/orangepi_3_lts_defconfig
+
+diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
+index 43951a77..8dbbb6f4 100644
+--- a/arch/arm/dts/Makefile
++++ b/arch/arm/dts/Makefile
+@@ -710,6 +710,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \
+ dtb-$(CONFIG_MACH_SUN50I_H6) += \
+ 	sun50i-h6-beelink-gs1.dtb \
+ 	sun50i-h6-orangepi-3.dtb \
++	sun50i-h6-orangepi-3-lts.dtb \
+ 	sun50i-h6-orangepi-lite2.dtb \
+ 	sun50i-h6-orangepi-one-plus.dtb \
+ 	sun50i-h6-pine-h64.dtb \
+diff --git a/arch/arm/dts/sun50i-h6-orangepi-3-lts.dts b/arch/arm/dts/sun50i-h6-orangepi-3-lts.dts
+new file mode 100644
+index 00000000..67f38b8a
+--- /dev/null
++++ b/arch/arm/dts/sun50i-h6-orangepi-3-lts.dts
+@@ -0,0 +1,361 @@
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
++// Copyright (C) 2023 Jernej Skrabec <jernej.skrabec@gmail.com>
++// Based on sun50i-h6-orangepi-3.dts, which is:
++// Copyright (C) 2019 Ondřej Jirman <megous@megous.com>
++
++/dts-v1/;
++
++#include "sun50i-h6.dtsi"
++#include "sun50i-h6-cpu-opp.dtsi"
++
++#include <dt-bindings/gpio/gpio.h>
++
++/ {
++	model = "OrangePi 3 LTS";
++	compatible = "xunlong,orangepi-3-lts", "allwinner,sun50i-h6";
++
++	aliases {
++		ethernet0 = &emac;
++		serial0 = &uart0;
++	};
++
++	chosen {
++		stdout-path = "serial0:115200n8";
++	};
++
++	connector {
++		compatible = "hdmi-connector";
++		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
++		type = "a";
++
++		port {
++			hdmi_con_in: endpoint {
++				remote-endpoint = <&hdmi_out_con>;
++			};
++		};
++	};
++
++	ext_osc32k: ext_osc32k_clk {
++		#clock-cells = <0>;
++		compatible = "fixed-clock";
++		clock-frequency = <32768>;
++		clock-output-names = "ext_osc32k";
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		led-0 {
++			label = "orangepi:red:power";
++			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
++		};
++
++		led-1 {
++			label = "orangepi:green:status";
++			gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
++			default-state = "on";
++		};
++	};
++
++	reg_vcc5v: vcc5v {
++		/* board wide 5V supply directly from the DC jack */
++		compatible = "regulator-fixed";
++		regulator-name = "vcc-5v";
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		regulator-always-on;
++	};
++
++	reg_gmac_3v3: gmac-3v3 {
++		compatible = "regulator-fixed";
++		regulator-name = "gmac-3v3";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		startup-delay-us = <150000>;
++		enable-active-high;
++		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
++	};
++
++	reg_vcc33_wifi: vcc33-wifi {
++		/* Always on 3.3V regulator for WiFi and BT */
++		compatible = "regulator-fixed";
++		regulator-name = "vcc33-wifi";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		enable-active-high;
++		gpio = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
++	};
++
++	reg_vcc_wifi_io: vcc-wifi-io {
++		/* Always on 1.8V/300mA regulator for WiFi and BT IO */
++		compatible = "regulator-fixed";
++		regulator-name = "vcc-wifi-io";
++		regulator-min-microvolt = <1800000>;
++		regulator-max-microvolt = <1800000>;
++		regulator-always-on;
++		vin-supply = <&reg_vcc33_wifi>;
++	};
++
++	wifi_pwrseq: wifi-pwrseq {
++		compatible = "mmc-pwrseq-simple";
++		clocks = <&rtc 1>;
++		clock-names = "ext_clock";
++		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
++		post-power-on-delay-ms = <200>;
++	};
++};
++
++&cpu0 {
++	cpu-supply = <&reg_dcdca>;
++};
++
++&de {
++	status = "okay";
++};
++
++&dwc3 {
++	status = "okay";
++};
++
++&ehci0 {
++	status = "okay";
++};
++
++&ehci3 {
++	status = "okay";
++};
++
++&emac {
++	pinctrl-names = "default";
++	pinctrl-0 = <&ext_rgmii_pins>;
++	phy-mode = "rgmii";
++	phy-handle = <&ext_rgmii_phy>;
++	phy-supply = <&reg_gmac_3v3>;
++	allwinner,rx-delay-ps = <1500>;
++	allwinner,tx-delay-ps = <700>;
++	status = "okay";
++};
++
++&gpu {
++	mali-supply = <&reg_dcdcc>;
++	status = "okay";
++};
++
++&hdmi {
++	hvcc-supply = <&reg_bldo2>;
++	status = "okay";
++};
++
++&hdmi_out {
++	hdmi_out_con: endpoint {
++		remote-endpoint = <&hdmi_con_in>;
++	};
++};
++
++&mdio {
++	ext_rgmii_phy: ethernet-phy@1 {
++		compatible = "ethernet-phy-ieee802.3-c22";
++		reg = <1>;
++
++		reset-gpios = <&pio 3 14 GPIO_ACTIVE_LOW>; /* PD14 */
++		reset-assert-us = <15000>;
++		reset-deassert-us = <40000>;
++	};
++};
++
++&mmc0 {
++	vmmc-supply = <&reg_cldo1>;
++	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
++	bus-width = <4>;
++	status = "okay";
++};
++
++&mmc1 {
++	vmmc-supply = <&reg_vcc33_wifi>;
++	vqmmc-supply = <&reg_vcc_wifi_io>;
++	mmc-pwrseq = <&wifi_pwrseq>;
++	bus-width = <4>;
++	non-removable;
++	status = "okay";
++};
++
++&mmc2 {
++	vmmc-supply = <&reg_cldo1>;
++	vqmmc-supply = <&reg_bldo2>;
++	cap-mmc-hw-reset;
++	non-removable;
++	bus-width = <8>;
++	status = "okay";
++};
++
++&ohci0 {
++	status = "okay";
++};
++
++&ohci3 {
++	status = "okay";
++};
++
++&pio {
++	vcc-pc-supply = <&reg_bldo2>;
++	vcc-pd-supply = <&reg_cldo1>;
++	vcc-pg-supply = <&reg_bldo3>;
++};
++
++&r_ir {
++	status = "okay";
++};
++
++&r_rsb {
++	clock-frequency = <100000>;
++	status = "okay";
++
++	axp805: pmic@745 {
++		compatible = "x-powers,axp805", "x-powers,axp806";
++		reg = <0x745>;
++		interrupt-parent = <&r_intc>;
++		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
++		interrupt-controller;
++		#interrupt-cells = <1>;
++		x-powers,self-working-mode;
++		vina-supply = <&reg_vcc5v>;
++		vinb-supply = <&reg_vcc5v>;
++		vinc-supply = <&reg_vcc5v>;
++		vind-supply = <&reg_vcc5v>;
++		vine-supply = <&reg_vcc5v>;
++		aldoin-supply = <&reg_vcc5v>;
++		bldoin-supply = <&reg_vcc5v>;
++		cldoin-supply = <&reg_vcc5v>;
++
++		regulators {
++			reg_aldo1: aldo1 {
++				regulator-always-on;
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++				regulator-name = "vcc-pl-led-ir";
++			};
++
++			reg_aldo2: aldo2 {
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++				regulator-name = "vcc33-audio-tv-ephy-mac";
++			};
++
++			/* ALDO3 is shorted to CLDO1 */
++			reg_aldo3: aldo3 {
++				regulator-always-on;
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++				regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-1";
++			};
++
++			reg_bldo1: bldo1 {
++				regulator-always-on;
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++				regulator-name = "vcc18-dram-bias-pll";
++			};
++
++			reg_bldo2: bldo2 {
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++				regulator-name = "vcc-efuse-pcie-hdmi-pc";
++			};
++
++			reg_bldo3: bldo3 {
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <1800000>;
++				regulator-name = "vcc-pm-pg-dcxoio-wifi";
++			};
++
++			bldo4 {
++				/* unused */
++			};
++
++			reg_cldo1: cldo1 {
++				regulator-always-on;
++				regulator-min-microvolt = <3300000>;
++				regulator-max-microvolt = <3300000>;
++				regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-2";
++			};
++
++			cldo2 {
++				/* unused */
++			};
++
++			cldo3 {
++				/* unused */
++			};
++
++			reg_dcdca: dcdca {
++				regulator-always-on;
++				regulator-min-microvolt = <800000>;
++				regulator-max-microvolt = <1160000>;
++				regulator-ramp-delay = <2500>;
++				regulator-name = "vdd-cpu";
++			};
++
++			reg_dcdcc: dcdcc {
++				regulator-enable-ramp-delay = <32000>;
++				regulator-min-microvolt = <810000>;
++				regulator-max-microvolt = <1080000>;
++				regulator-ramp-delay = <2500>;
++				regulator-name = "vdd-gpu";
++			};
++
++			reg_dcdcd: dcdcd {
++				regulator-always-on;
++				regulator-min-microvolt = <980000>;
++				regulator-max-microvolt = <980000>;
++				regulator-name = "vdd-sys";
++			};
++
++			reg_dcdce: dcdce {
++				regulator-always-on;
++				regulator-min-microvolt = <1200000>;
++				regulator-max-microvolt = <1200000>;
++				regulator-name = "vcc-dram";
++			};
++
++			sw {
++				/* unused */
++			};
++		};
++	};
++};
++
++&pwm {
++	status = "okay";
++};
++
++&r_ir {
++	status = "okay";
++};
++
++&rtc {
++	clocks = <&ext_osc32k>;
++};
++
++/delete-node/ &spi0;
++
++&uart0 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart0_ph_pins>;
++	status = "okay";
++};
++
++&usb2otg {
++	dr_mode = "host";
++	status = "okay";
++};
++
++&usb2phy {
++	usb0_id_det-gpios = <&pio 2 15 GPIO_ACTIVE_HIGH>; /* PC15 */
++	usb0_vbus-supply = <&reg_vcc5v>;
++	usb3_vbus-supply = <&reg_vcc5v>;
++	status = "okay";
++};
++
++&usb3phy {
++	status = "okay";
++};
+diff --git a/configs/orangepi_3_lts_defconfig b/configs/orangepi_3_lts_defconfig
+new file mode 100644
+index 00000000..41a9af4e
+--- /dev/null
++++ b/configs/orangepi_3_lts_defconfig
+@@ -0,0 +1,19 @@
++CONFIG_ARM=y
++CONFIG_ARCH_SUNXI=y
++CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-3-lts"
++CONFIG_SPL=y
++CONFIG_MACH_SUN50I_H6=y
++CONFIG_SUNXI_DRAM_H6_LPDDR3=y
++CONFIG_MMC0_CD_PIN="PF6"
++CONFIG_MMC_SUNXI_SLOT_EXTRA=2
++# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
++CONFIG_SPL_STACK=0x118000
++CONFIG_SYS_PBSIZE=1024
++CONFIG_SYS_BOOTM_LEN=0x2000000
++CONFIG_PHY_SUN50I_USB3=y
++CONFIG_USB_XHCI_HCD=y
++CONFIG_USB_XHCI_DWC3=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_OHCI_HCD=y
++CONFIG_USB_DWC3=y
++# CONFIG_USB_DWC3_GADGET is not set
+-- 
+2.39.2
+

recipes-bsp/u-boot/files/0004-mangopi-mq-r-t113-Fix-serial-console.patch

@@ -0,0 +1,30 @@
+From bf813915bf480154c707e0be14016cef94adbd95 Mon Sep 17 00:00:00 2001
+From: Marek Belisko <marek.belisko@gmail.com>
+Date: Tue, 7 May 2024 11:27:08 +0200
+Subject: [PATCH] mangopi-mq-r-t113: Fix serial console
+
+Serial console is on uart3 not on uart0.
+
+Upstream-Status: Inappropriate (for this board only)
+
+Signed-off-by: Marek Belisko <marek.belisko@gmail.com>
+---
+ include/configs/sunxi-common.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
+index b8ca77d031..4e4808d2c1 100644
+--- a/include/configs/sunxi-common.h
++++ b/include/configs/sunxi-common.h
+@@ -324,7 +324,7 @@
+ 	MEM_LAYOUT_ENV_EXTRA_SETTINGS \
+ 	DFU_ALT_INFO_RAM \
+ 	"fdtfile=" FDTFILE "\0" \
+-	"console=ttyS0,115200\0" \
++	"console=ttyS3,115200\0" \
+ 	"uuid_gpt_esp=" UUID_GPT_ESP "\0" \
+ 	"uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \
+ 	"partitions=" PARTS_DEFAULT "\0" \
+-- 
+2.25.1
+

recipes-bsp/u-boot/files/aarch64/boot.cmd

@@ -0,0 +1,11 @@
+# Default to (primary) SD
+rootdev=mmcblk0p2
+if itest.b *0x28 == 0x02 ; then
+	# U-Boot loaded from eMMC or secondary SD so use it for rootfs too
+	echo "U-boot loaded from eMMC or secondary SD"
+	rootdev=mmcblk1p2
+fi
+setenv bootargs console=${console} console=tty1 root=/dev/${rootdev} rootwait panic=10 ${extra}
+load mmc 0:1 ${fdt_addr_r} ${fdtfile}
+load mmc 0:1 ${kernel_addr_r} Image
+booti ${kernel_addr_r} - ${fdt_addr_r}

recipes-bsp/u-boot/files/arm/boot.cmd

@@ -0,0 +1,11 @@
+# Default to (primary) SD
+rootdev=mmcblk0p2
+if itest.b *0x28 == 0x02 ; then
+	# U-Boot loaded from eMMC or secondary SD so use it for rootfs too
+	echo "U-boot loaded from eMMC or secondary SD"
+	rootdev=mmcblk1p2
+fi
+setenv bootargs console=${console} console=tty1 root=/dev/${rootdev} rootwait panic=10 ${extra}
+load mmc 0:1 ${fdt_addr_r} ${fdtfile} || load mmc 0:1 ${fdt_addr_r} boot/allwinner/${fdtfile}
+load mmc 0:1 ${kernel_addr_r} zImage || load mmc 0:1 ${kernel_addr_r} boot/zImage || load mmc 0:1 ${kernel_addr_r} uImage || load mmc 0:1 ${kernel_addr_r} boot/uImage
+bootz ${kernel_addr_r} - ${fdt_addr_r} || bootm ${kernel_addr_r} - ${fdt_addr_r}

recipes-bsp/u-boot/files/bananapi-m64/boot.cmd

@@ -0,0 +1,11 @@
+# Default to (primary) SD
+rootdev=mmcblk0p2
+if itest.b *0x28 == 0x02 ; then
+	# U-Boot loaded from eMMC or secondary SD so use it for rootfs too
+	echo "U-boot loaded from eMMC or secondary SD"
+	rootdev=mmcblk2p2
+fi
+setenv bootargs console=${console} console=tty1 root=/dev/${rootdev} rootwait panic=10 ${extra}
+load mmc 0:1 ${fdt_addr_r} ${fdtfile}
+load mmc 0:1 ${kernel_addr_r} Image
+booti ${kernel_addr_r} - ${fdt_addr_r}

recipes-bsp/u-boot/files/boot.cmd

@@ -1,4 +0,0 @@
-setenv bootargs console=${console} console=tty1 root=/dev/mmcblk0p2 rootwait panic=10 ${extra}
-load mmc 0:1 ${fdt_addr_r} ${fdtfile} || load mmc 0:1 ${fdt_addr_r} boot/${fdtfile}
-load mmc 0:1 ${kernel_addr_r} zImage || load mmc 0:1 ${kernel_addr_r} boot/zImage || load mmc 0:1 ${kernel_addr_r} uImage || load mmc 0:1 ${kernel_addr_r} boot/uImage
-bootz ${kernel_addr_r} - ${fdt_addr_r} || bootm ${kernel_addr_r} - ${fdt_addr_r}

recipes-bsp/u-boot/u-boot-sunxi.bb

@@ -2,7 +2,7 @@ DESCRIPTION = "U-Boot port for sunxi"
 
 require recipes-bsp/u-boot/u-boot.inc
 
-LICENSE = "GPLv2"
+LICENSE = "GPL-2.0-only"
 LIC_FILES_CHKSUM = "file://Licenses/gpl-2.0.txt;md5=b234ee4d69f5fce4486a80fdaf4a4263"
 
 # No patches for other machines yet
@@ -18,7 +18,12 @@ UBOOT_MACHINE_olinuxino-a20 = "A20-OLinuXino-Micro_config"
 UBOOT_MACHINE_olinuxino-a10s = "A10s-OLinuXino-Micro_config"
 UBOOT_MACHINE_meleg = "Mele_A1000G_config"
 
-SRC_URI = "git://github.com/linux-sunxi/u-boot-sunxi.git;protocol=git;branch=sunxi"
+SRC_URI = " \
+	git://github.com/linux-sunxi/u-boot-sunxi.git;protocol=https;branch=sunxi \
+	file://0001-gcc5-fixes.patch \
+	file://0002-gcc6-fixes.patch \
+	file://0003-No-gcc-version-specific-includes.patch \
+	"
 
 PE = "1"
 
@@ -31,3 +36,7 @@ S = "${WORKDIR}/git"
 PACKAGE_ARCH = "${MACHINE_ARCH}"
 
 SPL_BINARY="u-boot-sunxi-with-spl.bin"
+
+do_configure () {
+    oe_runmake -C ${S} O=${B} ${UBOOT_MACHINE}
+}

recipes-bsp/u-boot/u-boot-sunxi/0001-gcc5-fixes.patch

@@ -0,0 +1,197 @@
+From a5e50d6fd7321d0bc60fda2db938c170d09f9dee Mon Sep 17 00:00:00 2001
+From: Trevor Woerner <twoerner@gmail.com>
+Date: Thu, 24 Sep 2015 22:36:02 -0400
+Subject: [PATCH] gcc5 fixes
+
+gcc5 is pickier about inline functions defined in headers.
+
+Signed-off-by: Trevor Woerner <twoerner@gmail.com>
+---
+ arch/arm/include/asm/io.h     | 12 ++++----
+ common/board_f.c              | 18 ++++++------
+ common/main.c                 |  2 +-
+ include/linux/compiler-gcc5.h | 65 +++++++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 81 insertions(+), 16 deletions(-)
+ create mode 100644 include/linux/compiler-gcc5.h
+
+diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
+index 6a1f05a..2f6925b 100644
+--- a/arch/arm/include/asm/io.h
++++ b/arch/arm/include/asm/io.h
+@@ -75,7 +75,7 @@ static inline phys_addr_t virt_to_phys(void * vaddr)
+ #define __arch_putw(v,a)		(*(volatile unsigned short *)(a) = (v))
+ #define __arch_putl(v,a)		(*(volatile unsigned int *)(a) = (v))
+ 
+-extern inline void __raw_writesb(unsigned long addr, const void *data,
++static inline void __raw_writesb(unsigned long addr, const void *data,
+ 				 int bytelen)
+ {
+ 	uint8_t *buf = (uint8_t *)data;
+@@ -83,7 +83,7 @@ extern inline void __raw_writesb(unsigned long addr, const void *data,
+ 		__arch_putb(*buf++, addr);
+ }
+ 
+-extern inline void __raw_writesw(unsigned long addr, const void *data,
++static inline void __raw_writesw(unsigned long addr, const void *data,
+ 				 int wordlen)
+ {
+ 	uint16_t *buf = (uint16_t *)data;
+@@ -91,7 +91,7 @@ extern inline void __raw_writesw(unsigned long addr, const void *data,
+ 		__arch_putw(*buf++, addr);
+ }
+ 
+-extern inline void __raw_writesl(unsigned long addr, const void *data,
++static inline void __raw_writesl(unsigned long addr, const void *data,
+ 				 int longlen)
+ {
+ 	uint32_t *buf = (uint32_t *)data;
+@@ -99,21 +99,21 @@ extern inline void __raw_writesl(unsigned long addr, const void *data,
+ 		__arch_putl(*buf++, addr);
+ }
+ 
+-extern inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
++static inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
+ {
+ 	uint8_t *buf = (uint8_t *)data;
+ 	while(bytelen--)
+ 		*buf++ = __arch_getb(addr);
+ }
+ 
+-extern inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
++static inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
+ {
+ 	uint16_t *buf = (uint16_t *)data;
+ 	while(wordlen--)
+ 		*buf++ = __arch_getw(addr);
+ }
+ 
+-extern inline void __raw_readsl(unsigned long addr, void *data, int longlen)
++static inline void __raw_readsl(unsigned long addr, void *data, int longlen)
+ {
+ 	uint32_t *buf = (uint32_t *)data;
+ 	while(longlen--)
+diff --git a/common/board_f.c b/common/board_f.c
+index f285bad..72b421c 100644
+--- a/common/board_f.c
++++ b/common/board_f.c
+@@ -78,24 +78,24 @@ DECLARE_GLOBAL_DATA_PTR;
+  ************************************************************************
+  * May be supplied by boards if desired
+  */
+-inline void __coloured_LED_init(void) {}
++void __coloured_LED_init(void) {}
+ void coloured_LED_init(void)
+ 	__attribute__((weak, alias("__coloured_LED_init")));
+-inline void __red_led_on(void) {}
++void __red_led_on(void) {}
+ void red_led_on(void) __attribute__((weak, alias("__red_led_on")));
+-inline void __red_led_off(void) {}
++void __red_led_off(void) {}
+ void red_led_off(void) __attribute__((weak, alias("__red_led_off")));
+-inline void __green_led_on(void) {}
++void __green_led_on(void) {}
+ void green_led_on(void) __attribute__((weak, alias("__green_led_on")));
+-inline void __green_led_off(void) {}
++void __green_led_off(void) {}
+ void green_led_off(void) __attribute__((weak, alias("__green_led_off")));
+-inline void __yellow_led_on(void) {}
++void __yellow_led_on(void) {}
+ void yellow_led_on(void) __attribute__((weak, alias("__yellow_led_on")));
+-inline void __yellow_led_off(void) {}
++void __yellow_led_off(void) {}
+ void yellow_led_off(void) __attribute__((weak, alias("__yellow_led_off")));
+-inline void __blue_led_on(void) {}
++void __blue_led_on(void) {}
+ void blue_led_on(void) __attribute__((weak, alias("__blue_led_on")));
+-inline void __blue_led_off(void) {}
++void __blue_led_off(void) {}
+ void blue_led_off(void) __attribute__((weak, alias("__blue_led_off")));
+ 
+ /*
+diff --git a/common/main.c b/common/main.c
+index 8b6f274..3312b90 100644
+--- a/common/main.c
++++ b/common/main.c
+@@ -27,7 +27,7 @@ DECLARE_GLOBAL_DATA_PTR;
+ /*
+  * Board-specific Platform code can reimplement show_boot_progress () if needed
+  */
+-void inline __show_boot_progress (int val) {}
++void __show_boot_progress (int val) {}
+ void show_boot_progress (int val) __attribute__((weak, alias("__show_boot_progress")));
+ 
+ #define MAX_DELAY_STOP_STR 32
+diff --git a/include/linux/compiler-gcc5.h b/include/linux/compiler-gcc5.h
+new file mode 100644
+index 0000000..c8c5659
+--- /dev/null
++++ b/include/linux/compiler-gcc5.h
+@@ -0,0 +1,65 @@
++#ifndef __LINUX_COMPILER_H
++#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
++#endif
++
++#define __used				__attribute__((__used__))
++#define __must_check			__attribute__((warn_unused_result))
++#define __compiler_offsetof(a, b)	__builtin_offsetof(a, b)
++
++/* Mark functions as cold. gcc will assume any path leading to a call
++   to them will be unlikely.  This means a lot of manual unlikely()s
++   are unnecessary now for any paths leading to the usual suspects
++   like BUG(), printk(), panic() etc. [but let's keep them for now for
++   older compilers]
++
++   Early snapshots of gcc 4.3 don't support this and we can't detect this
++   in the preprocessor, but we can live with this because they're unreleased.
++   Maketime probing would be overkill here.
++
++   gcc also has a __attribute__((__hot__)) to move hot functions into
++   a special section, but I don't see any sense in this right now in
++   the kernel context */
++#define __cold			__attribute__((__cold__))
++
++#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
++
++#ifndef __CHECKER__
++# define __compiletime_warning(message) __attribute__((warning(message)))
++# define __compiletime_error(message) __attribute__((error(message)))
++#endif /* __CHECKER__ */
++
++/*
++ * Mark a position in code as unreachable.  This can be used to
++ * suppress control flow warnings after asm blocks that transfer
++ * control elsewhere.
++ *
++ * Early snapshots of gcc 4.5 don't support this and we can't detect
++ * this in the preprocessor, but we can live with this because they're
++ * unreleased.  Really, we need to have autoconf for the kernel.
++ */
++#define unreachable() __builtin_unreachable()
++
++/* Mark a function definition as prohibited from being cloned. */
++#define __noclone	__attribute__((__noclone__))
++
++/*
++ * Tell the optimizer that something else uses this function or variable.
++ */
++#define __visible __attribute__((externally_visible))
++
++/*
++ * GCC 'asm goto' miscompiles certain code sequences:
++ *
++ *   http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
++ *
++ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
++ *
++ * (asm goto is automatically volatile - the naming reflects this.)
++ */
++#define asm_volatile_goto(x...)	do { asm goto(x); asm (""); } while (0)
++
++#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
++#define __HAVE_BUILTIN_BSWAP32__
++#define __HAVE_BUILTIN_BSWAP64__
++#define __HAVE_BUILTIN_BSWAP16__
++#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
+-- 
+2.6.0.rc3
+

recipes-bsp/u-boot/u-boot-sunxi/0002-gcc6-fixes.patch

@@ -0,0 +1,69 @@
+diff -urN git-ORIG/include/linux/compiler-gcc6.h git/include/linux/compiler-gcc6.h
+--- git-ORIG/include/linux/compiler-gcc6.h	1969-12-31 19:00:00.000000000 -0500
++++ git/include/linux/compiler-gcc6.h	2017-04-09 19:50:16.920945874 -0400
+@@ -0,0 +1,65 @@
++#ifndef __LINUX_COMPILER_H
++#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
++#endif
++
++#define __used				__attribute__((__used__))
++#define __must_check			__attribute__((warn_unused_result))
++#define __compiler_offsetof(a, b)	__builtin_offsetof(a, b)
++
++/* Mark functions as cold. gcc will assume any path leading to a call
++   to them will be unlikely.  This means a lot of manual unlikely()s
++   are unnecessary now for any paths leading to the usual suspects
++   like BUG(), printk(), panic() etc. [but let's keep them for now for
++   older compilers]
++
++   Early snapshots of gcc 4.3 don't support this and we can't detect this
++   in the preprocessor, but we can live with this because they're unreleased.
++   Maketime probing would be overkill here.
++
++   gcc also has a __attribute__((__hot__)) to move hot functions into
++   a special section, but I don't see any sense in this right now in
++   the kernel context */
++#define __cold			__attribute__((__cold__))
++
++#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
++
++#ifndef __CHECKER__
++# define __compiletime_warning(message) __attribute__((warning(message)))
++# define __compiletime_error(message) __attribute__((error(message)))
++#endif /* __CHECKER__ */
++
++/*
++ * Mark a position in code as unreachable.  This can be used to
++ * suppress control flow warnings after asm blocks that transfer
++ * control elsewhere.
++ *
++ * Early snapshots of gcc 4.5 don't support this and we can't detect
++ * this in the preprocessor, but we can live with this because they're
++ * unreleased.  Really, we need to have autoconf for the kernel.
++ */
++#define unreachable() __builtin_unreachable()
++
++/* Mark a function definition as prohibited from being cloned. */
++#define __noclone	__attribute__((__noclone__))
++
++/*
++ * Tell the optimizer that something else uses this function or variable.
++ */
++#define __visible __attribute__((externally_visible))
++
++/*
++ * GCC 'asm goto' miscompiles certain code sequences:
++ *
++ *   http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
++ *
++ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
++ *
++ * (asm goto is automatically volatile - the naming reflects this.)
++ */
++#define asm_volatile_goto(x...)	do { asm goto(x); asm (""); } while (0)
++
++#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
++#define __HAVE_BUILTIN_BSWAP32__
++#define __HAVE_BUILTIN_BSWAP64__
++#define __HAVE_BUILTIN_BSWAP16__
++#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */

recipes-bsp/u-boot/u-boot-sunxi/0003-No-gcc-version-specific-includes.patch

@@ -0,0 +1,24 @@
+From bc4aa5814cbedbfaa1c79dfe7ea2571fee7f2d51 Mon Sep 17 00:00:00 2001
+From: Andrey Lebedev <andrey@lebedev.lt>
+Date: Wed, 22 Jan 2020 20:00:11 +0200
+Subject: [PATCH] No gcc version-specific includes
+
+In order to support gcc-5 and above. Fixes compilation errors like
+
+linux/compiler-gcc9.h: No such file or directory
+---
+ include/linux/compiler-gcc.h | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
+index 9896e547b9..5f0bd65f3a 100644
+--- a/include/linux/compiler-gcc.h
++++ b/include/linux/compiler-gcc.h
+@@ -90,4 +90,3 @@
+ #define __gcc_header(x) #x
+ #define _gcc_header(x) __gcc_header(linux/compiler-gcc##x.h)
+ #define gcc_header(x) _gcc_header(x)
+-#include gcc_header(__GNUC__)
+-- 
+2.20.1
+

recipes-bsp/u-boot/u-boot_%.bbappend

@@ -0,0 +1,33 @@
+FILESEXTRAPATHS:prepend:sunxi := "${THISDIR}/files:"
+
+DEPENDS:append:sunxi = " bc-native dtc-native swig-native python3-native flex-native bison-native "
+DEPENDS:append:sun50i = " trusted-firmware-a"
+
+COMPATIBLE_MACHINE:sunxi = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
+
+DEFAULT_PREFERENCE:sun4i = "1"
+DEFAULT_PREFERENCE:sun5i = "1"
+DEFAULT_PREFERENCE:sun7i = "1"
+DEFAULT_PREFERENCE:sun8i = "1"
+DEFAULT_PREFERENCE:sun50i = "1"
+
+SRC_URI:append:sunxi = " \
+    file://0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch \
+    file://0002-Added-nanopi-r1-board-support.patch \
+    file://0003-sunxi-H6-Enable-Ethernet-on-Orange-Pi-One-Plus.patch \
+    file://0004-mangopi-mq-r-t113-Fix-serial-console.patch \
+    file://0004-OrangePi-3-LTS-support.patch \
+    file://boot.cmd \
+"
+
+UBOOT_ENV_SUFFIX:sunxi = "scr"
+UBOOT_ENV:sunxi = "boot"
+
+EXTRA_OEMAKE:append:sunxi = ' HOSTLDSHARED="${BUILD_CC} -shared ${BUILD_LDFLAGS} ${BUILD_CFLAGS}" '
+EXTRA_OEMAKE:append:sun50i = " BL31=${DEPLOY_DIR_IMAGE}/bl31.bin SCP=/dev/null"
+
+do_compile:sun50i[depends] += "trusted-firmware-a:do_deploy"
+
+do_compile:append:sunxi() {
+    ${B}/tools/mkimage -C none -A arm -T script -d ${UNPACKDIR}/boot.cmd ${UNPACKDIR}/${UBOOT_ENV_BINARY}
+}

recipes-bsp/u-boot/u-boot_2015.07.bb

@@ -1,43 +0,0 @@
-DESCRIPTION="Upstream's U-boot configured for sunxi devices"
-
-require recipes-bsp/u-boot/u-boot.inc
-
-DEPENDS += "dtc-native"
-
-LICENSE = "GPLv2"
-
-LIC_FILES_CHKSUM = "\
-file://Licenses/Exceptions;md5=338a7cb1e52d0d1951f83e15319a3fe7 \
-file://Licenses/bsd-2-clause.txt;md5=6a31f076f5773aabd8ff86191ad6fdd5 \
-file://Licenses/bsd-3-clause.txt;md5=4a1190eac56a9db675d58ebe86eaf50c \
-file://Licenses/eCos-2.0.txt;md5=b338cb12196b5175acd3aa63b0a0805c \
-file://Licenses/gpl-2.0.txt;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
-file://Licenses/ibm-pibs.txt;md5=c49502a55e35e0a8a1dc271d944d6dba \
-file://Licenses/isc.txt;md5=ec65f921308235311f34b79d844587eb \
-file://Licenses/lgpl-2.0.txt;md5=5f30f0716dfdd0d91eb439ebec522ec2 \
-file://Licenses/lgpl-2.1.txt;md5=4fbd65380cdd255951079008b364516c \
-file://Licenses/x11.txt;md5=b46f176c847b8742db02126fb8af92e2 \
-"
-
-COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
-
-DEFAULT_PREFERENCE_sun4i="1"
-DEFAULT_PREFERENCE_sun5i="1"
-DEFAULT_PREFERENCE_sun7i="1"
-
-SRC_URI += "file://boot.cmd"
-
-SRCREV = "33711bdd4a4dce942fb5ae85a68899a8357bdd94"
-
-PV = "v2015.07${SRCPV}"
-
-PE = "1"
-
-SPL_BINARY="u-boot-sunxi-with-spl.bin"
-
-UBOOT_ENV_SUFFIX = "scr"
-UBOOT_ENV = "boot"
-
-do_compile_append() {
-    ${S}/tools/mkimage -C none -A arm -T script -d ${WORKDIR}/boot.cmd ${WORKDIR}/${UBOOT_ENV_BINARY}
-}

recipes-devtools/python/files/olinuxino-a20lime2-emmc

@@ -0,0 +1 @@
+/home/marek/data/projects/kas/sources/meta-sunxi/recipes-devtools/python/files/olinuxino-a20lime2

recipes-devtools/python/files/olinuxino-a20som/mapping.h

@@ -0,0 +1,265 @@
+/*
+ *
+ * This file is part of pyA20SOM.
+ * mapping.h is python GPIO extension.
+ *
+ * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
+ *
+ * pyA20SOM is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MAPPING_H
+#define __MAPPING_H
+
+#include "gpio_lib.h"
+
+/**
+Structure that describe all gpio
+*/
+typedef struct _pin {
+    char name[10];          // The processor pin
+    int offset;             // Memory offset for the pin
+    int pin_number;         // Number on the connector
+}pin_t;
+
+typedef struct _gpio {
+    char connector_name[10];
+    pin_t pins[41];
+}gpio_t;
+
+
+gpio_t gpio[] = {
+    {"lcd",
+        {
+            {   "PD16", SUNXI_GPD(16),  5   },
+            {   "PD17", SUNXI_GPD(17),  6   },
+            {   "PD18", SUNXI_GPD(18),  7   },
+            {   "PD19", SUNXI_GPD(19),  8   },
+            {   "PD20", SUNXI_GPD(20),  9   },
+            {   "PD21", SUNXI_GPD(21),  10  },
+            {   "PD22", SUNXI_GPD(22),  11  },
+            {   "PD23", SUNXI_GPD(23),  12  },
+            {   "PD8", SUNXI_GPD(8),    13  },
+            {   "PD9", SUNXI_GPD(9),    14  },
+            {   "PD10", SUNXI_GPD(10),  15  },
+            {   "PD11", SUNXI_GPD(11),  16  },
+            {   "PD12", SUNXI_GPD(12),  17  },
+            {   "PD13", SUNXI_GPD(13),  18  },
+            {   "PD14", SUNXI_GPD(14),  19  },
+            {   "PD15", SUNXI_GPD(15),  20  },
+            {   "PD0",  SUNXI_GPD(0),   21  },
+            {   "PD1",  SUNXI_GPD(1),   22  },
+            {   "PD2",  SUNXI_GPD(2),   23  },
+            {   "PD3",  SUNXI_GPD(3),   24  },
+            {   "PD4",  SUNXI_GPD(4),   25  },
+            {   "PD5",  SUNXI_GPD(5),   26  },
+            {   "PD6",  SUNXI_GPD(6),   27  },
+            {   "PD7",  SUNXI_GPD(7),   28  },
+            {   "PD26", SUNXI_GPD(26),  29  },
+            {   "PD27", SUNXI_GPD(27),  30  },
+            {   "PD24", SUNXI_GPD(24),  31  },
+            {   "PD25", SUNXI_GPD(25),  32  },
+            {   "PH7",  SUNXI_GPH(7),   35  },
+            {   "PB2",  SUNXI_GPB(2),   36  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+    {"gpio1",
+        {
+            {   "PB9",  SUNXI_GPB(9),   7   },
+            {   "PH5",  SUNXI_GPH(5),   9   },
+            {   "PH4",  SUNXI_GPH(4),   11  },
+            {   "PH6",  SUNXI_GPH(6),   13  },
+            {   "PH3",  SUNXI_GPH(3),   15  },
+            {   "PI0",  SUNXI_GPI(0),   29  },
+            {   "PI1",  SUNXI_GPI(1),   31  },
+            {   "PI2",  SUNXI_GPI(2),   33  },
+            {   "PI3",  SUNXI_GPI(3),   35  },
+            {   "PI10", SUNXI_GPI(10),  37  },
+            {   "PI11", SUNXI_GPI(11),  39  },
+            {   "PI14", SUNXI_GPI(14),  40  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+    {"gpio2",
+        {
+            {   "PB22", SUNXI_GPB(22),  21  },
+            {   "PB23", SUNXI_GPB(23),  22  },
+            {   "PA0",  SUNXI_GPA(0),   29  },
+            {   "PA1",  SUNXI_GPA(1),   27  },
+            {   "PA2",  SUNXI_GPA(2),   25  },
+            {   "PA3",  SUNXI_GPA(3),   23  },
+            {   "PA4",  SUNXI_GPA(4),   30  },
+            {   "PA5",  SUNXI_GPA(5),   28  },
+            {   "PA6",  SUNXI_GPA(6),   26  },
+            {   "PA7",  SUNXI_GPA(7),   24  },
+            {   "PA8",  SUNXI_GPA(8),   33  },
+            {   "PA9",  SUNXI_GPA(9),   35  },
+            {   "PA10", SUNXI_GPA(10),  31  },
+            {   "PA11", SUNXI_GPA(11),  37  },
+            {   "PA12", SUNXI_GPA(12),  39  },
+            {   "PA13", SUNXI_GPA(13),  32  },
+            {   "PA14", SUNXI_GPA(14),  34  },
+            {   "PA15", SUNXI_GPA(15),  36  },
+            {   "PA16", SUNXI_GPA(16),  38  },
+            {   "PA17", SUNXI_GPA(17),  40  },
+
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio3",
+        {
+            {   "PH0",  SUNXI_GPH(0),   5   },
+            {   "PH2",  SUNXI_GPH(2),   7   },
+            {   "PH8",  SUNXI_GPH(8),   9   },
+            {   "PH9",  SUNXI_GPH(9),   11  },
+            {   "PH10", SUNXI_GPH(10),  13  },
+            {   "PH11", SUNXI_GPH(11),  15  },
+            {   "PH12", SUNXI_GPH(12),  17  },
+            {   "PH13", SUNXI_GPH(13),  19  },
+            {   "PH14", SUNXI_GPH(14),  21  },
+            {   "PH15", SUNXI_GPH(15),  23  },
+            {   "PH16", SUNXI_GPH(16),  25  },
+            {   "PH17", SUNXI_GPH(17),  27  },
+            {   "PH18", SUNXI_GPH(18),  29  },
+            {   "PH19", SUNXI_GPH(19),  31  },
+            {   "PH20", SUNXI_GPH(20),  33  },
+            {   "PH21", SUNXI_GPH(21),  35  },
+            {   "PH22", SUNXI_GPH(22),  37  },
+            {   "PH23", SUNXI_GPH(23),  39  },
+
+            {   "PB3",  SUNXI_GPB(3),   6   },
+            {   "PB4",  SUNXI_GPB(4),   8   },
+            {   "PB5",  SUNXI_GPB(5),   10  },
+            {   "PB6",  SUNXI_GPB(6),   12  },
+            {   "PB7",  SUNXI_GPB(7),   14  },
+            {   "PB8",  SUNXI_GPB(8),   16  },
+            {   "PB10",  SUNXI_GPB(10), 18  },
+            {   "PB11",  SUNXI_GPB(11), 20  },
+            {   "PB12",  SUNXI_GPB(12), 22  },
+            {   "PB13",  SUNXI_GPB(13), 24  },
+            {   "PB14",  SUNXI_GPB(14), 26  },
+            {   "PB15",  SUNXI_GPB(15), 28  },
+            {   "PB16",  SUNXI_GPB(16), 30  },
+            {   "PB17",  SUNXI_GPB(17), 32  },
+            {   "PH24",  SUNXI_GPH(24), 34  },
+            {   "PH25",  SUNXI_GPH(25), 36  },
+            {   "PH26",  SUNXI_GPH(26), 38  },
+            {   "PH27",  SUNXI_GPH(27), 40  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio4",
+        {
+            {   "PB0",  SUNXI_GPB(0),   5   },
+            {   "PB1",  SUNXI_GPB(1),   7   },
+            {   "PE0",  SUNXI_GPE(0),   6   },
+            {   "PE1",  SUNXI_GPE(1),   8   },
+            {   "PE2",  SUNXI_GPE(2),   10  },
+            {   "PE3",  SUNXI_GPE(3),   12  },
+            {   "PE4",  SUNXI_GPE(4),   14  },
+            {   "PE5",  SUNXI_GPE(5),   16  },
+            {   "PE6",  SUNXI_GPE(0),   18  },
+            {   "PE7",  SUNXI_GPE(0),   9   },
+            {   "PE8",  SUNXI_GPE(0),   11  },
+            {   "PE9",  SUNXI_GPE(0),   13  },
+            {   "PE10", SUNXI_GPE(0),   15  },
+            {   "PE11", SUNXI_GPE(0),   17  },
+            {   "PI20", SUNXI_GPI(20),  19  },
+            {   "PI21", SUNXI_GPI(21),  20  },
+            {   "PB18",  SUNXI_GPB(18), 21  },
+            {   "PB19",  SUNXI_GPB(19), 22  },
+            {   "PI16",  SUNXI_GPI(16), 23  },
+            {   "PI17",  SUNXI_GPI(17), 24  },
+            {   "PI18",  SUNXI_GPI(18), 25  },
+            {   "PI19",  SUNXI_GPI(19), 26  },
+            {   "PI12",  SUNXI_GPI(12), 27  },
+            {   "PI13",  SUNXI_GPI(13), 28  },
+            {   "PB20",  SUNXI_GPB(20), 29  },
+            {   "PB21",  SUNXI_GPB(21), 30  },
+            {   "PC22",  SUNXI_GPC(22), 31  },
+            {   "PC21",  SUNXI_GPC(21), 32  },
+            {   "PC20",  SUNXI_GPC(20), 33  },
+            {   "PC19",  SUNXI_GPC(21), 34  },
+            {   "PI15",  SUNXI_GPI(15), 36  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio5",
+        {
+            {   "PG0",  SUNXI_GPG(0),   1   },
+            {   "PG1",  SUNXI_GPG(1),   3   },
+            {   "PG2",  SUNXI_GPG(2),   5   },
+            {   "PG3",  SUNXI_GPG(3),   7   },
+            {   "PG4",  SUNXI_GPG(4),   9   },
+            {   "PG5",  SUNXI_GPG(5),   11  },
+            {   "PG6",  SUNXI_GPG(6),   13  },
+            {   "PG7",  SUNXI_GPG(7),   15  },
+            {   "PG8",  SUNXI_GPG(8),   17  },
+            {   "PG9",  SUNXI_GPG(9),   19  },
+            {   "PG10", SUNXI_GPG(10),  21  },
+            {   "PG11", SUNXI_GPG(11),  23  },
+            {   "PC8",  SUNXI_GPC(8),   25  },
+            {   "PC9",  SUNXI_GPC(9),   27  },
+            {   "PC10", SUNXI_GPC(10),  29  },
+            {   "PC11", SUNXI_GPC(11),  31  },
+            {   "PC12", SUNXI_GPC(12),  33  },
+            {   "PC13", SUNXI_GPC(13),  35  },
+            {   "PC14", SUNXI_GPC(14),  37  },
+            {   "PC15", SUNXI_GPC(15),  39  },
+            {   "PI6",  SUNXI_GPI(6),   4   },
+            {   "PI7",  SUNXI_GPI(7),   6   },
+            {   "PI8",  SUNXI_GPI(8),   8   },
+            {   "PI9",  SUNXI_GPI(9),   10  },
+            {   "PI4",  SUNXI_GPI(4),   12  },
+            {   "PI5",  SUNXI_GPI(5),   14  },
+            {   "PC16", SUNXI_GPC(16),  16  },
+            {   "PC17", SUNXI_GPC(17),  18  },
+            {   "PC18", SUNXI_GPC(18),  20  },
+            {   "PC23", SUNXI_GPC(23),  22  },
+            {   "PC24", SUNXI_GPC(24),  24  },
+            {   "PC7",  SUNXI_GPC(7),   26  },
+            {   "PC6",  SUNXI_GPC(6),   28  },
+            {   "PC5",  SUNXI_GPC(5),   30  },
+            {   "PC3",  SUNXI_GPC(3),   32  },
+            {   "PC2",  SUNXI_GPC(2),   34  },
+            {   "PC1",  SUNXI_GPC(1),   36  },
+            {   "PC0",  SUNXI_GPC(0),   38  },
+            {   "PC4",  SUNXI_GPC(4),   40  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+};
+
+
+
+#endif

recipes-devtools/python/files/setup.py.patch

@@ -1,51 +0,0 @@
---- pyA20-0.2.0/setup.py	2014-09-04 12:17:18.000000000 +0200
-+++ pyA20-0.2.0/setup.py	2014-11-24 17:44:37.000000000 +0100
-@@ -43,31 +43,31 @@
-     Detect processor type
-     :return:
-     """
--    cpuinfo = open("/proc/cpuinfo", 'r')
--    for line in cpuinfo:
--        if "Hardware" in line:
--            processor = line.split(":")[1].rstrip()
-+    #cpuinfo = open("/proc/cpuinfo", 'r')
-+    #for line in cpuinfo:
-+    #    if "Hardware" in line:
-+    #        processor = line.split(":")[1].rstrip()
- 
--            if "sun4i" in processor:
--                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A10)")
-+    #        if "sun4i" in processor:
-+    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A10)")
- 
--            elif "sun5i" in processor:
--                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A13)")
-+    #        elif "sun5i" in processor:
-+    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A13)")
- 
--            elif "sun7i" in processor:
--                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A20)")
-+    #        elif "sun7i" in processor:
-+    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A20)")
- 
--            else:
--                print ("Detected processor: " + print_color("unknown"))
-+    #        else:
-+    #            print ("Detected processor: " + print_color("unknown"))
- 
- 
--            if processor_type not in processor:
--                print_warning()
-+    #        if processor_type not in processor:
-+    #            print_warning()
- 
--            return
-+    return
- 
--    print ("No processor detected")
--    print_warning()
-+    #print ("No processor detected")
-+    #print_warning()
- 
- 
- class build_ext(_build_ext):

recipes-devtools/python/pyA20_0.2.0.bb

@@ -1,24 +0,0 @@
-DESCRIPTION = "A module to control Allwinner GPIO,SPI and I2C channels"
-HOMEPAGE = "https://pypi.python.org/pypi/pyA20"
-SECTION = "devel/python"
-LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://PKG-INFO;md5=b4cb7d5da6f1efc1d0bf487169e83985"
-DEPENDS = "python"
-
-# No GPIO mappings for other machines yet
-COMPATIBLE_MACHINE = "(olinuxino-a13|olinuxino-a10|olinuxino-a20|olinuxino-a10lime|olinuxino-a20lime|olinuxino-a20lime2|olinuxino-a13som)"
-
-SRC_URI = "http://pypi.python.org/packages/source/p/pyA20/pyA20-${PV}.tar.gz \
-           file://setup.py.patch \
-           file://mapping.h \
-          "
-S = "${WORKDIR}/pyA20-${PV}"
-
-inherit distutils
-
-do_compile_prepend() { 
-cp ${WORKDIR}/mapping.h ${S}/pyA20/gpio/mapping.h
-}
-
-SRC_URI[md5sum] = "b4115859834f09ebd389f810f2ffefb9"
-SRC_URI[sha256sum] = "9855747d9bbdfcce6b460fcd67d953155e39f4e002a9a4c573910248b451dad8"

recipes-devtools/python/pya20_0.2.12.bb

@@ -0,0 +1,23 @@
+DESCRIPTION = "A module to control Allwinner GPIO,SPI and I2C channels"
+HOMEPAGE = "https://pypi.python.org/pypi/pyA20"
+SECTION = "devel/python"
+LICENSE = "GPL-3.0-only"
+LIC_FILES_CHKSUM = "file://PKG-INFO;md5=4e584373bb0f46ef1e423cb7df37847d"
+DEPENDS = "python3"
+
+# No GPIO mappings for other machines yet
+COMPATIBLE_MACHINE = "(olinuxino-a13|olinuxino-a10|olinuxino-a20|olinuxino-a10lime|olinuxino-a20lime|olinuxino-a20lime2|olinuxino-a13som|olinuxino-a20som)"
+
+SRC_URI = "https://pypi.python.org/packages/source/p/pyA20/pyA20-${PV}.tar.gz \
+           file://mapping.h \
+          "
+S = "${WORKDIR}/pyA20-${PV}"
+
+inherit distutils3
+
+do_compile:prepend() { 
+    cp ${UNPACKDIR}/mapping.h ${S}/pyA20/gpio/mapping.h
+}
+
+SRC_URI[md5sum] = "cab03b4931199804603d1074f6d8f48f"
+SRC_URI[sha256sum] = "4bef559a9c5a4d648d9834bad996cf2805b20d6063b8051029ffdf9deda2b536"

recipes-graphics/libgles/sunxi-mali/0001-fix-test-build.patch

@@ -0,0 +1,28 @@
+From 054886253f4f559b351a94e1e6ebfd5eb504461f Mon Sep 17 00:00:00 2001
+From: Trevor Woerner <twoerner@gmail.com>
+Date: Thu, 24 Sep 2015 23:38:11 -0400
+Subject: [PATCH] fix test build
+
+Allow the test application to build and link successfully.
+
+Signed-off-by: Trevor Woerner <twoerner@gmail.com>
+---
+ test/Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/test/Makefile b/test/Makefile
+index 700416e..51481c9 100644
+--- a/test/Makefile
++++ b/test/Makefile
+@@ -5,7 +5,7 @@ CFLAGS ?= -Wall
+ all: test
+ 
+ test: ../config.mk test.c
+-	$(CC) $(CFLAGS) -o $@ test.c -lEGL -lGLESv2
++	$(CC) $(CFLAGS) -I../include -L../../image/usr/lib -o $@ test.c -lEGL -lGLESv2 -lX11
+ 
+ clean:
+ 	rm -f test
+-- 
+2.6.0.rc3
+

recipes-graphics/libgles/sunxi-mali/0002-Add-missing-GLchar-definition.patch

@@ -0,0 +1,136 @@
+From 15d91ef25234ff402f4288273989693f2d402d9d Mon Sep 17 00:00:00 2001
+From: Raoul Hecky <raoul.hecky@gmail.com>
+Date: Fri, 10 Jan 2014 14:44:53 +0100
+Subject: [PATCH] Add missing GLchar definition, some gl/gles apps needs that
+ to compile correctly
+
+Build pkg-config files for gles and egl and install them
+
+Fix .pc creation
+
+add correct driver version in .pc
+---
+ .gitignore          |  1 +
+ Makefile            |  1 +
+ Makefile.pc         | 21 +++++++++++++++++++++
+ egl.pc.in           | 11 +++++++++++
+ gles_cm.pc.in       | 11 +++++++++++
+ glesv2.pc.in        | 11 +++++++++++
+ include/GLES/gl.h   |  1 +
+ include/GLES2/gl2.h |  1 +
+ 8 files changed, 58 insertions(+)
+ create mode 100644 Makefile.pc
+ create mode 100644 egl.pc.in
+ create mode 100644 gles_cm.pc.in
+ create mode 100644 glesv2.pc.in
+
+diff --git a/.gitignore b/.gitignore
+index 6865abf..e8a3713 100644
+--- a/.gitignore
++++ b/.gitignore
+@@ -1,2 +1,3 @@
+ config.mk
+ *~
++*.pc
+diff --git a/Makefile b/Makefile
+index 60d4a0f..94845ea 100644
+--- a/Makefile
++++ b/Makefile
+@@ -21,6 +21,7 @@ clean:
+ install: config.mk
+ 	$(MAKE) -C lib install
+ 	$(MAKE) -C include install
++	$(MAKE) -f Makefile.pc
+ 
+ test: config.mk
+ 	$(MAKE) -C test test
+diff --git a/Makefile.pc b/Makefile.pc
+new file mode 100644
+index 0000000..01097fd
+--- /dev/null
++++ b/Makefile.pc
+@@ -0,0 +1,21 @@
++include Makefile.setup
++include config.mk
++
++all:
++	echo "prefix=$(prefix)" > egl.pc
++	cat egl.pc.in >> egl.pc
++	sed -i "s/MVERSION/$MALI_VERSION/g" egl.pc
++	echo "prefix=$(prefix)" > gles_cm.pc
++	cat gles_cm.pc.in >> gles_cm.pc
++	sed -i "s/MVERSION/$MALI_VERSION/g" gles_cm.pc
++	echo "prefix=$(prefix)" > glesv2.pc
++	cat glesv2.pc.in >> glesv2.pc
++	sed -i "s/MVERSION/$MALI_VERSION/g" glesv2.pc
++
++install: egl.pc gles_cm.pc glesv2.pc
++	$(MKDIR) $(libdir)/pkgconfig
++	$(INSTALL_DATA) $^ $(libdir)/pkgconfig
++
++clean:
++	$(RM) egl.pc gles_cm.pc glesv2.pc
++
+diff --git a/egl.pc.in b/egl.pc.in
+new file mode 100644
+index 0000000..0697183
+--- /dev/null
++++ b/egl.pc.in
+@@ -0,0 +1,11 @@
++exec_prefix=${prefix}
++libdir=${prefix}/lib
++includedir=${prefix}/include
++
++Name: egl
++Description: Mali EGL library
++Requires.private:
++Version: MVERSION
++Libs: -L${libdir} -lEGL
++Libs.private: -lm -lpthread -ldl
++Cflags: -I${includedir}
+diff --git a/gles_cm.pc.in b/gles_cm.pc.in
+new file mode 100644
+index 0000000..22bc348
+--- /dev/null
++++ b/gles_cm.pc.in
+@@ -0,0 +1,11 @@
++exec_prefix=${prefix}
++libdir=${prefix}/lib
++includedir=${prefix}/include
++
++Name: gles_cm
++Description: Mali OpenGL ES 1.1 CM library
++Requires.private:
++Version: MVERSION
++Libs: -L${libdir} -lGLES_CM
++Libs.private: -lm -lpthread -ldl
++Cflags: -I${includedir}
+diff --git a/glesv2.pc.in b/glesv2.pc.in
+new file mode 100644
+index 0000000..efef2ed
+--- /dev/null
++++ b/glesv2.pc.in
+@@ -0,0 +1,11 @@
++exec_prefix=${prefix}
++libdir=${prefix}/lib
++includedir=${prefix}/include
++
++Name: glesv2
++Description: Mali OpenGL ES 2.0 library
++Requires.private:
++Version: MVERSION
++Libs: -L${libdir} -lGLESv2
++Libs.private: -lm -lpthread -ldl
++Cflags: -I${includedir}
+diff --git a/include/GLES/gl.h b/include/GLES/gl.h
+index 858f394..a6bb591 100644
+--- a/include/GLES/gl.h
++++ b/include/GLES/gl.h
+@@ -29,6 +29,7 @@ typedef float  GLfloat;
+ typedef float  GLclampf;
+ typedef signed int  GLfixed;
+ typedef signed int  GLclampx;
++typedef char GLchar;
+ 
+ typedef int * GLintptr;
+ typedef int *  GLsizeiptr;

recipes-graphics/libgles/sunxi-mali/0003-Fix-sed-to-replace-by-the-correct-var.patch

@@ -0,0 +1,30 @@
+From 95bbd40135f96b473d4c713317e485d0049580cd Mon Sep 17 00:00:00 2001
+From: Raoul Hecky <raoul.hecky@gmail.com>
+Date: Tue, 8 Apr 2014 08:10:12 +0200
+Subject: [PATCH] Fix sed to replace by the correct var
+
+---
+ Makefile.pc | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/Makefile.pc b/Makefile.pc
+index 01097fd..c51d18c 100644
+--- a/Makefile.pc
++++ b/Makefile.pc
+@@ -4,13 +4,13 @@ include config.mk
+ all:
+ 	echo "prefix=$(prefix)" > egl.pc
+ 	cat egl.pc.in >> egl.pc
+-	sed -i "s/MVERSION/$MALI_VERSION/g" egl.pc
++	sed -i "s/MVERSION/${MALI_VERSION}/g" egl.pc
+ 	echo "prefix=$(prefix)" > gles_cm.pc
+ 	cat gles_cm.pc.in >> gles_cm.pc
+-	sed -i "s/MVERSION/$MALI_VERSION/g" gles_cm.pc
++	sed -i "s/MVERSION/${MALI_VERSION}/g" gles_cm.pc
+ 	echo "prefix=$(prefix)" > glesv2.pc
+ 	cat glesv2.pc.in >> glesv2.pc
+-	sed -i "s/MVERSION/$MALI_VERSION/g" glesv2.pc
++	sed -i "s/MVERSION/${MALI_VERSION}/g" glesv2.pc
+ 
+ install: egl.pc gles_cm.pc glesv2.pc
+ 	$(MKDIR) $(libdir)/pkgconfig

recipes-graphics/libgles/sunxi-mali_git.bb

@@ -3,56 +3,102 @@ DESCRIPTION = "libGLES for the A10/A13 Allwinner processor with Mali 400 (X11)"
 LICENSE = "Proprietary"
 LIC_FILES_CHKSUM = "file://README;md5=1b81a178e80ee888ee4571772699ab2c"
 
-COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
-DEPENDS = "virtual/libx11 libxau libxdmcp libdrm dri2proto libdri2 libump"
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i)"
 
 # These libraries shouldn't get installed in world builds unless something
 # explicitly depends upon them.
 EXCLUDE_FROM_WORLD = "1"
 PROVIDES = "virtual/libgles1 virtual/libgles2 virtual/egl"
 
-inherit distro_features_check
-REQUIRED_DISTRO_FEATURES = "opengl"
+# There's only hardfp version available
+python __anonymous() {
+    tunes = d.getVar("TUNE_FEATURES", True)
+    if not tunes:
+        return
+    if "callconvention-hard" not in tunes:
+        pkgn = d.getVar("PN", True)
+        pkgv = d.getVar("PV", True)
+        raise bb.parse.SkipPackage("%s-%s ONLY supports hardfp mode for now" % (pkgn, pkgv))
+}
 
-SRCREV_pn-${PN} = "d343311efc8db166d8371b28494f0f27b6a58724"
-SRC_URI = "gitsm://github.com/linux-sunxi/sunxi-mali.git \
-           file://0001-Add-EGLSyncKHR-EGLTimeKHR-and-GLChar-definition.patch"
+SRCREV = "d343311efc8db166d8371b28494f0f27b6a58724"
+SRC_URI = "git://github.com/linux-sunxi/sunxi-mali.git;protocol=https;branch=master \
+           file://0001-Add-EGLSyncKHR-EGLTimeKHR-and-GLChar-definition.patch \
+           file://0002-Add-missing-GLchar-definition.patch \
+           file://0003-Fix-sed-to-replace-by-the-correct-var.patch \
+           file://0001-fix-test-build.patch \
+           "
 
 S = "${WORKDIR}/git"
 
-DEPENDS = "libdrm dri2proto libump"
+DEPENDS = "libdrm xorgproto libump patchelf-native"
 
-PACKAGECONFIG ??= "${@base_contains('DISTRO_FEATURES', 'x11', 'x11', '', d)} ${@base_contains('DISTRO_FEATURES', 'wayland', 'wayland', '', d)}"
+PACKAGECONFIG ??= "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11', '', d)} ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland', '', d)}"
 PACKAGECONFIG[wayland] = "EGL_TYPE=framebuffer,,,"
 PACKAGECONFIG[x11] = "EGL_TYPE=x11,,virtual/libx11 libxau libxdmcp libdri2,"
 
+# Inhibit warnings about files being stripped, we can't do anything about it.
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
 INHIBIT_PACKAGE_STRIP = "1"
+INHIBIT_SYSROOT_STRIP = "1"
 
 do_configure() {
-         DESTDIR=${D}/ VERSION=r3p0 ABI=armhf ${EXTRA_OECONF} make config
+         DESTDIR=${D}/ VERSION=r3p0 ABI=armhf make ${EXTRA_OEMAKE} config
 }
 
 do_install() {
+    make -f Makefile.pc
+
+    # install headers
+    install -d -m 0755 ${D}${includedir}/EGL
+    install -m 0755 ${S}/include/EGL/*.h ${D}${includedir}/EGL/
+    install -d -m 0755 ${D}${includedir}/GLES
+    install -m 0755 ${S}/include/GLES/*.h ${D}${includedir}/GLES/
+    install -d -m 0755 ${D}${includedir}/GLES2
+    install -m 0755 ${S}/include/GLES2/*.h ${D}${includedir}/GLES2/
+    install -d -m 0755 ${D}${includedir}/KHR
+    install -m 0755 ${S}/include/KHR/*.h ${D}${includedir}/KHR/
+
+    # Copy the .pc files
+    install -d -m 0755 ${D}${libdir}/pkgconfig
+    install -m 0644 ${S}/egl.pc ${D}${libdir}/pkgconfig/
+    install -m 0644 ${S}/gles_cm.pc ${D}${libdir}/pkgconfig/
+    install -m 0644 ${S}/glesv2.pc ${D}${libdir}/pkgconfig/
+
     install -d ${D}${libdir}
     install -d ${D}${includedir}
 
     make libdir=${D}${libdir}/ includedir=${D}${includedir}/ install
     make libdir=${D}${libdir}/ includedir=${D}${includedir}/ install -C include
+    rm -f ${D}${includedir}/KHR/khrplatform.h
 
     # Fix .so name and create symlinks, binary package provides .so wich can't be included directly in package without triggering the 'dev-so' QA check
     # Packages like xf86-video-fbturbo dlopen() libUMP.so, so we do need to ship the .so files in ${PN}
 
     mv ${D}${libdir}/libMali.so ${D}${libdir}/libMali.so.3
+    patchelf --set-soname libMali.so.3 ${D}${libdir}/libMali.so.3
     ln -sf libMali.so.3 ${D}${libdir}/libMali.so
 
     for flib in libEGL.so.1.4 libGLESv1_CM.so.1.1 libGLESv2.so.2.0 ; do
         rm ${D}${libdir}/$flib
         ln -sf libMali.so.3 ${D}${libdir}/$flib
     done
+
+    DESTDIR=${D}/ VERSION=r3p0 ABI=armhf make ${EXTRA_OEMAKE} test
+    install -d ${D}${bindir}
+    install -m 0755 ${S}/test/test ${D}${bindir}/sunximali-test
 }
 
 # Packages like xf86-video-fbturbo dlopen() libUMP.so, so we do need to ship the .so files in ${PN}
-FILES_${PN} += "${libdir}/lib*.so"
-FILES_${PN}-dev = "${includedir}"
+PACKAGES =+ "${PN}-test"
+
+RPROVIDES:${PN} += "libGLESv2.so libEGL.so libGLESv2.so libGLESv1_CM.so libMali.so"
+RDEPENDS:${PN}-test = "${PN}"
+
+FILES:${PN} += "${libdir}/lib*.so"
+FILES:${PN}-dev = "${includedir} ${libdir}/pkgconfig/*"
+FILES:${PN}-test = "${bindir}/sunximali-test"
+
 # These are closed binaries generated elsewhere so don't check ldflags & text relocations
-INSANE_SKIP_${PN} = "dev-so ldflags textrel"
+INSANE_SKIP:${PN} = "dev-so ldflags textrel"
+INSANE_SKIP:${PN}-test = "dev-so ldflags textrel"

recipes-graphics/libump/libump_git.bb

@@ -1,14 +1,14 @@
 DESCRIPTION = "Unified Memory Provider userspace API source code needed for xf86-video-mali compilation"
 
-LICENSE = "Apache-2"
+LICENSE = "Apache-2.0"
 LIC_FILES_CHKSUM = "file://debian/copyright;md5=edf7fb6071cae7ec80d537a05ee17198"
 
 inherit autotools
 
 PV = "r4p0-00rel0+git${SRCPV}"
-SRCREV_pn-${PN} = "ec0680628744f30b8fac35e41a7bd8e23e59c39f"
+SRCREV = "ec0680628744f30b8fac35e41a7bd8e23e59c39f"
 
-SRC_URI = "git://github.com/linux-sunxi/libump.git"
+SRC_URI = "git://github.com/linux-sunxi/libump.git;protocol=https;branch=master"
 
 S = "${WORKDIR}/git"
 

recipes-graphics/mesa/mesa-gl_%.bbappend

@@ -0,0 +1 @@
+PACKAGECONFIG:class-target = "opengl x11 gallium"

recipes-graphics/mesa/mesa_%.bbappend

@@ -0,0 +1,5 @@
+# Enable lima and panfrost Mesa drivers
+PACKAGECONFIG:append:use-mailine-graphics = " lima panfrost"
+# Enable KMS renderonly Mesa support
+# See https://cgit.freedesktop.org/mesa/mesa/commit/?id=2b780fe89300199f2334539aa1678e9b68f0434f
+GALLIUMDRIVERS:append:use-mailine-graphics = ",kmsro"

recipes-graphics/tslib/tslib/0001-Support-reading-coordinates-from-multitouch-devices.patch

@@ -1,79 +0,0 @@
-From c525c0b5d8eada982c99442454fcf7b8364e10b3 Mon Sep 17 00:00:00 2001
-From: Florian Boor <florian@kernelconcepts.de>
-Date: Fri, 1 Apr 2011 23:30:21 +0200
-Subject: [PATCH] Support reading coordinates from multitouch devices.
-
-Signed-off-by: Florian Boor <florian@kernelconcepts.de>
-Signed-off-by: Christopher Larson <kergoth@gmail.com>
----
- plugins/input-raw.c | 33 +++++++++++++++++++++++----------
- 1 file changed, 23 insertions(+), 10 deletions(-)
-
-diff --git a/plugins/input-raw.c b/plugins/input-raw.c
-index 4396eab..1e48505 100644
---- a/plugins/input-raw.c
-+++ b/plugins/input-raw.c
-@@ -40,6 +40,11 @@
- # define KEY_CNT (KEY_MAX+1)
- #endif
- 
-+#ifndef ABS_MT_POSITION_X
-+# define ABS_MT_POSITION_X       0x35    /* Center X ellipse position */
-+# define ABS_MT_POSITION_Y       0x36    /* Center Y ellipse position */
-+#endif
-+
- #include "tslib-private.h"
- 
- #define GRAB_EVENTS_WANTED	1
-@@ -160,16 +165,17 @@ static int ts_input_read(struct tslib_module_info *inf,
- 				}
- 				break;
- 			case EV_SYN:
--				/* Fill out a new complete event */
--				if (pen_up) {
--					samp->x = 0;
--					samp->y = 0;
--					samp->pressure = 0;
--					pen_up = 0;
--				} else {
--					samp->x = i->current_x;
--					samp->y = i->current_y;
--					samp->pressure = i->current_p;
-+				if (ev.code == SYN_REPORT) {
-+					/* Fill out a new complete event */
-+					if (pen_up) {
-+						samp->x = 0;
-+						samp->y = 0;
-+						samp->pressure = 0;
-+						pen_up = 0;
-+					} else {
-+						samp->x = i->current_x;
-+						samp->y = i->current_y;
-+						samp->pressure = i->current_p;
- 				}
- 				samp->tv = ev.time;
- 	#ifdef DEBUG
-@@ -179,6 +185,7 @@ static int ts_input_read(struct tslib_module_info *inf,
- 	#endif /* DEBUG */
- 				samp++;
- 				total++;
-+				}
- 				break;
- 			case EV_ABS:
- 				switch (ev.code) {
-@@ -188,6 +195,12 @@ static int ts_input_read(struct tslib_module_info *inf,
- 				case ABS_Y:
- 					i->current_y = ev.value;
- 					break;
-+				case ABS_MT_POSITION_X:
-+					i->current_x = ev.value;
-+					break;
-+				case ABS_MT_POSITION_Y:
-+					i->current_y = ev.value;
-+					break;
- 				case ABS_PRESSURE:
- 					i->current_p = ev.value;
- 					break;
--- 
-1.8.1.4
-

recipes-graphics/tslib/tslib_1.1.bbappend

@@ -1,4 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
-
-SRC_URI += "file://tslib.patch"
-

recipes-graphics/tslib/tslib_1.1.bbappend.disabled

@@ -0,0 +1,4 @@
+FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
+
+SRC_URI += "file://tslib.patch"
+

recipes-graphics/xorg-xserver/libdri2_git.bb

@@ -1,15 +1,15 @@
 DESCRIPTION = "Library for the DRI2 extension to the X Window System"
 
-LICENSE = "MIT-X"
+LICENSE = "MIT-CMU"
 LIC_FILES_CHKSUM = "file://COPYING;md5=827da9afab1f727f2a66574629e0f39c"
 
-DEPENDS = "libdrm libxext xextproto libxfixes dri2proto"
+DEPENDS = "libdrm libxext libxfixes xorgproto"
 
 PE = "1"
 PV = "1.0.0+git${SRCPV}"
 SRC_URI = "git://github.com/robclark/libdri2.git;protocol=http;branch=master"
 
-SRCREV_pn-${PN} = "4f1eef3183df2b270c3d5cbef07343ee5127a6a4"
+SRCREV = "4f1eef3183df2b270c3d5cbef07343ee5127a6a4"
 
 S = "${WORKDIR}/git"
 

recipes-graphics/xorg-xserver/xf86-video-fbturbo_git.bb

@@ -2,14 +2,14 @@ require recipes-graphics/xorg-driver/xorg-driver-video.inc
 
 DESCRIPTION = "X.Org X server -- A10/A13 display driver"
 
-LICENSE = "MIT-X"
+LICENSE = "MIT-CMU"
 LIC_FILES_CHKSUM = "file://COPYING;md5=f91dc3ee5ce59eb4b528e67e98a31266"
 
-DEPENDS += "sunxi-mali"
+DEPENDS += "sunxi-mali libump xorgproto"
 
 PE = "3"
-PV = "0.3.1+git${SRCPV}"
-SRCREV_pn-${PN} = "eed17d5586c3b4dfcf0b5976e8b947b171d4897c"
+PV = "0.5.1+git${SRCPV}"
+SRCREV = "e094e3c8f9004ca3347694bd05b99d136e8621b9"
 
 SRC_URI = "git://github.com/ssvb/xf86-video-fbturbo.git;protocol=http;branch=master \
            file://20-fbturbo.conf"
@@ -18,9 +18,9 @@ S = "${WORKDIR}/git"
 
 CFLAGS += " -I${STAGING_INCDIR}/xorg "
 
-do_install_append() {
+do_install:append() {
     install -d ${D}${datadir}/X11/xorg.conf.d
-    install -m 0644 ${WORKDIR}/20-fbturbo.conf ${D}${datadir}/X11/xorg.conf.d
+    install -m 0644 ${UNPACKDIR}/20-fbturbo.conf ${D}${datadir}/X11/xorg.conf.d
 }
 
-FILES_${PN} += "${datadir}/X11/xorg.conf.d/20-fbturbo.conf"
+FILES:${PN} += "${datadir}/X11/xorg.conf.d/20-fbturbo.conf"

recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend

@@ -1 +1 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"

recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend

@@ -0,0 +1 @@
+PACKAGECONFIG[dri3] = "-Ddri3=true,-Ddri3=false,libxshmfence"

recipes-kernel/linux-firmware/linux-firmware_%.bbappend

@@ -0,0 +1,13 @@
+# The brcmfmac driver looks for NVRAM files using the first entry in board
+# compatible since kernel >= 5.0:
+# https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0ad4b55b2f29784f93875e6231bf57cd233624a2
+# We create a link to the AP6212 module NVRAM file so that firmware is
+# autodetected by the driver.
+# WARNING: The following commit is required for NVRAM files to be included in
+# linux-firmware-bcm43430 package:
+# http://git.openembedded.org/openembedded-core/commit/?id=dde0f79f32fa6bab045ef60199903f74c4cc3393
+do_install:append:sunxi() {
+	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2.txt
+	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2-h3.txt
+	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt
+}

recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0003-drv-fix-incldue-path-for-unisocwcn.patch

@@ -0,0 +1,45 @@
+From 5138d597275fd503573fac84018186bd18740644 Mon Sep 17 00:00:00 2001
+From: pbiel <pbiel7@gmail.com>
+Date: Thu, 30 Mar 2023 22:45:33 +0200
+Subject: [PATCH] Fix incldue path for unisocwcn
+
+---
+ drivers/net/wireless/uwe5622/Makefile           | 4 +++-
+ drivers/net/wireless/uwe5622/unisocwcn/Makefile | 6 +++---
+ 2 files changed, 6 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/net/wireless/uwe5622/Makefile b/drivers/net/wireless/uwe5622/Makefile
+index 313ea5123..e9a398584 100644
+--- a/drivers/net/wireless/uwe5622/Makefile
++++ b/drivers/net/wireless/uwe5622/Makefile
+@@ -2,7 +2,9 @@ obj-$(CONFIG_AW_WIFI_DEVICE_UWE5622) += unisocwcn/
+ obj-$(CONFIG_WLAN_UWE5622)    += unisocwifi/
+ obj-$(CONFIG_TTY_OVERY_SDIO)  += tty-sdio/
+ 
+-UNISOCWCN_DIR := $(shell cd $(src)/unisocwcn/ && /bin/pwd)
++mkfile_path := $(abspath $(lastword $(MAKEFILE_LIST)))
++UNISOCWCN_DIR := $(dir $(mkfile_path))/unisocwcn/
++
+ UNISOC_BSP_INCLUDE := $(UNISOCWCN_DIR)/include
+ export UNISOC_BSP_INCLUDE
+ 
+diff --git a/drivers/net/wireless/uwe5622/unisocwcn/Makefile b/drivers/net/wireless/uwe5622/unisocwcn/Makefile
+index f9c595747..1ad490594 100644
+--- a/drivers/net/wireless/uwe5622/unisocwcn/Makefile
++++ b/drivers/net/wireless/uwe5622/unisocwcn/Makefile
+@@ -129,9 +129,9 @@ ccflags-y += -DCONFIG_WCN_BOOT
+ ccflags-y += -DCONFIG_WCN_UTILS
+ 
+ #### include path ######
+-ccflags-y += -I$(src)/include/
+-ccflags-y += -I$(src)/platform/
+-ccflags-y += -I$(src)/platform/rf/
++ccflags-y += -I$(srctree)/$(src)/include/
++ccflags-y += -I$(srctree)/$(src)/platform/
++ccflags-y += -I$(srctree)/$(src)/platform/rf/
+ 
+ #### add cflag for Customer ######
+ ### ---------- Hisilicon start ---------- ###
+-- 
+2.34.1
+

recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0004-drv-wireless-adapt-uwe5622-wifi-driver-to-kernel-6.1.patch

@@ -0,0 +1,177 @@
+From 5f4d2d5fc32dfe41c73cac36ec6747c34e5562a3 Mon Sep 17 00:00:00 2001
+From: pbiel <pbiel7@gmail.com>
+Date: Wed, 15 Mar 2023 23:04:27 +0100
+Subject: [PATCH] wireless: Adapt uwe5622 wifi driver to kernel 6.1
+
+---
+ drivers/net/wireless/uwe5622/tty-sdio/lpm.c            |  2 +-
+ .../uwe5622/unisocwcn/boot/wcn_integrate_dev.c         |  2 +-
+ .../uwe5622/unisocwcn/platform/wcn_parn_parser.c       |  2 +-
+ .../wireless/uwe5622/unisocwcn/platform/wcn_procfs.c   |  2 +-
+ .../wireless/uwe5622/unisocwcn/usb/wcn_usb_download.c  |  2 +-
+ .../net/wireless/uwe5622/unisocwcn/usb/wcn_usb_test.c  |  6 +++---
+ drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c     | 10 +++++-----
+ drivers/net/wireless/uwe5622/unisocwifi/cmdevt.c       |  2 +-
+ 8 files changed, 14 insertions(+), 14 deletions(-)
+
+diff --git a/drivers/net/wireless/uwe5622/tty-sdio/lpm.c b/drivers/net/wireless/uwe5622/tty-sdio/lpm.c
+index b2d9a8994e5e..35e30651a921 100644
+--- a/drivers/net/wireless/uwe5622/tty-sdio/lpm.c
++++ b/drivers/net/wireless/uwe5622/tty-sdio/lpm.c
+@@ -70,7 +70,7 @@ static int btwrite_proc_show(struct seq_file *m, void *v)
+ 
+ static int bluesleep_open_proc_btwrite(struct inode *inode, struct file *file)
+ {
+-	return single_open(file, btwrite_proc_show, PDE_DATA(inode));
++	return single_open(file, btwrite_proc_show, pde_data(inode));
+ }
+ 
+ static const struct proc_ops lpm_proc_btwrite_fops = {
+diff --git a/drivers/net/wireless/uwe5622/unisocwcn/boot/wcn_integrate_dev.c b/drivers/net/wireless/uwe5622/unisocwcn/boot/wcn_integrate_dev.c
+index 3ee6910e7cf7..29a3ec298bc1 100644
+--- a/drivers/net/wireless/uwe5622/unisocwcn/boot/wcn_integrate_dev.c
++++ b/drivers/net/wireless/uwe5622/unisocwcn/boot/wcn_integrate_dev.c
+@@ -562,7 +562,7 @@ static struct wcn_proc_data g_proc_data = {
+ static int wcn_platform_open(struct inode *inode, struct file *filp)
+ {
+ 	struct platform_proc_file_entry
+-	*entry = (struct platform_proc_file_entry *)PDE_DATA(inode);
++	*entry = (struct platform_proc_file_entry *)pde_data(inode);
+ 
+ 	WCN_INFO("entry name:%s\n!", entry->name);
+ 
+diff --git a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c
+index aea7d6d0fe57..bd841f0b32d3 100644
+--- a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c
++++ b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c
+@@ -146,7 +146,7 @@ static int prefixcmp(const char *str, const char *prefix)
+ }
+ 
+ #if KERNEL_VERSION(3, 19, 0) <= LINUX_VERSION_CODE
+-static int find_callback(struct dir_context *ctx, const char *name, int namlen,
++static bool find_callback(struct dir_context *ctx, const char *name, int namlen,
+ 		     loff_t offset, u64 ino, unsigned int d_type)
+ #else
+ static int find_callback(void *ctx, const char *name, int namlen,
+diff --git a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_procfs.c b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_procfs.c
+index 2edb7903d80e..9e453365bba8 100644
+--- a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_procfs.c
++++ b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_procfs.c
+@@ -431,7 +431,7 @@ static const struct proc_ops mdbg_snap_shoot_seq_fops = {
+ static int mdbg_proc_open(struct inode *inode, struct file *filp)
+ {
+ 	struct mdbg_proc_entry *entry =
+-		(struct mdbg_proc_entry *)PDE_DATA(inode);
++		(struct mdbg_proc_entry *)pde_data(inode);
+ 	filp->private_data = entry;
+ 
+ 	return 0;
+diff --git a/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_download.c b/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_download.c
+index 8f228d403909..750bfc0466cb 100644
+--- a/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_download.c
++++ b/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_download.c
+@@ -82,7 +82,7 @@ static int wcn_usb_dopen(struct inode *inode, struct file *file)
+ {
+ 	struct wcn_usb_ddata *data;
+ 
+-	data = (struct wcn_usb_ddata *)PDE_DATA(inode);
++	data = (struct wcn_usb_ddata *)pde_data(inode);
+ 
+ 	if (!data)
+ 		return -EIO;
+diff --git a/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_test.c b/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_test.c
+index c2cccc658c0d..e7a9f258943e 100644
+--- a/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_test.c
++++ b/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_test.c
+@@ -61,7 +61,7 @@ static int wcn_usb_channel_open(struct inode *inode, struct file *file)
+ {
+ 	struct channel *channel;
+ 
+-	channel = (struct channel *)PDE_DATA(inode);
++	channel = (struct channel *)pde_data(inode);
+ 
+ 	if (!channel)
+ 		return -EIO;
+@@ -467,7 +467,7 @@ static int wcn_usb_chnmg_open(struct inode *inode, struct file *file)
+ {
+ 	struct chnmg *chnmg;
+ 	/* get channel_list head */
+-	chnmg = (struct chnmg *)PDE_DATA(inode);
++	chnmg = (struct chnmg *)pde_data(inode);
+ 
+ 	file->private_data = chnmg;
+ 	return 0;
+@@ -916,7 +916,7 @@ static int print_level_open(struct inode *inode, struct file *file)
+ {
+ 	struct chnmg *chnmg;
+ 	/* get channel_list head */
+-	chnmg = (struct chnmg *)PDE_DATA(inode);
++	chnmg = (struct chnmg *)pde_data(inode);
+ 
+ 	file->private_data = chnmg;
+ 	return 0;
+diff --git a/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c b/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c
+index daef880ae3c0..2231388da70a 100644
+--- a/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c
++++ b/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c
+@@ -703,7 +703,7 @@ static int sprdwl_add_cipher_key(struct sprdwl_vif *vif, bool pairwise,
+ }
+ 
+ static int sprdwl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
+-				   u8 key_index, bool pairwise,
++				   int link_id, u8 key_index, bool pairwise,
+ 				   const u8 *mac_addr,
+ 				   struct key_params *params)
+ {
+@@ -725,7 +725,7 @@ static int sprdwl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
+ }
+ 
+ static int sprdwl_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
+-				   u8 key_index, bool pairwise,
++				   int link_id, u8 key_index, bool pairwise,
+ 				   const u8 *mac_addr)
+ {
+ 	struct sprdwl_vif *vif = netdev_priv(ndev);
+@@ -755,7 +755,7 @@ static int sprdwl_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
+ 
+ static int sprdwl_cfg80211_set_default_key(struct wiphy *wiphy,
+ 					   struct net_device *ndev,
+-					   u8 key_index, bool unicast,
++					   int link_id, u8 key_index, bool unicast,
+ 					   bool multicast)
+ {
+ 	struct sprdwl_vif *vif = netdev_priv(ndev);
+@@ -984,7 +984,7 @@ static int sprdwl_cfg80211_change_beacon(struct wiphy *wiphy,
+ 	return sprdwl_change_beacon(vif, beacon);
+ }
+ 
+-static int sprdwl_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev)
++static int sprdwl_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev, unsigned int link_id)
+ {
+ #ifdef DFS_MASTER
+ 	struct sprdwl_vif *vif = netdev_priv(ndev);
+@@ -2367,7 +2367,7 @@ void sprdwl_report_connection(struct sprdwl_vif *vif,
+ 		 conn_info->status == SPRDWL_ROAM_SUCCESS){
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 14, 0)
+ 		struct cfg80211_roam_info roam_info = {
+-			.bss = bss,
++			.links[0].bss = bss,
+ 			.req_ie = conn_info->req_ie,
+ 			.req_ie_len = conn_info->req_ie_len,
+ 			.resp_ie = conn_info->resp_ie,
+diff --git a/drivers/net/wireless/uwe5622/unisocwifi/cmdevt.c b/drivers/net/wireless/uwe5622/unisocwifi/cmdevt.c
+index e81619b12e39..1ecbfac5b490 100644
+--- a/drivers/net/wireless/uwe5622/unisocwifi/cmdevt.c
++++ b/drivers/net/wireless/uwe5622/unisocwifi/cmdevt.c
+@@ -3296,7 +3296,7 @@ void sprdwl_event_chan_changed(struct sprdwl_vif *vif, u8 *data, u16 len)
+ 						NL80211_CHAN_HT20);
+ 		else
+ 			wl_err("%s, ch is null!\n", __func__);
+-		cfg80211_ch_switch_notify(vif->ndev, &chandef);
++		cfg80211_ch_switch_notify(vif->ndev, &chandef, 0);
+ 	}
+ }
+ 
+-- 
+2.34.1
+

recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0005-drv-fix-setting-mac-address-for-netdev-in-uwe5622.patch

@@ -0,0 +1,35 @@
+From 9211a92d07e9a43fce104f87f9d45e890257b699 Mon Sep 17 00:00:00 2001
+From: pbiel <pbiel7@gmail.com>
+Date: Tue, 7 Mar 2023 20:28:44 +0100
+Subject: [PATCH] wireless: fix setting mac address for netdev in uwe5622
+ unisocwifi driver
+
+---
+ drivers/net/wireless/uwe5622/unisocwifi/main.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/net/wireless/uwe5622/unisocwifi/main.c b/drivers/net/wireless/uwe5622/unisocwifi/main.c
+index 21efdf4e0..566a9a7f3 100644
+--- a/drivers/net/wireless/uwe5622/unisocwifi/main.c
++++ b/drivers/net/wireless/uwe5622/unisocwifi/main.c
+@@ -1356,6 +1356,7 @@ static struct sprdwl_vif *sprdwl_register_netdev(struct sprdwl_priv *priv,
+ 	struct wireless_dev *wdev;
+ 	struct sprdwl_vif *vif;
+ 	int ret;
++	u8 target_mac_addr[ETH_ALEN] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+ 
+ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 17, 0))
+ 	ndev = alloc_netdev(sizeof(*vif), name, NET_NAME_UNKNOWN, ether_setup);
+@@ -1411,7 +1412,8 @@ static struct sprdwl_vif *sprdwl_register_netdev(struct sprdwl_priv *priv,
+ 	ndev->features |= NETIF_F_SG;
+ 	SET_NETDEV_DEV(ndev, wiphy_dev(priv->wiphy));
+ 
+-	sprdwl_set_mac_addr(vif, addr, ndev->dev_addr);
++	sprdwl_set_mac_addr(vif, addr, target_mac_addr);
++	dev_addr_set(ndev, target_mac_addr);
+ 
+ #ifdef CONFIG_P2P_INTF
+ 	if (type == NL80211_IFTYPE_P2P_DEVICE)
+-- 
+2.34.1
+

recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0007-drv-add-sunxi_get_soc_chipid-and-sunxi_get_serial.patch

@@ -0,0 +1,60 @@
+From 452a691a83df1aab77cec33203cb04a817817a05 Mon Sep 17 00:00:00 2001
+From: The-going <48602507+The-going@users.noreply.github.com>
+Date: Thu, 5 May 2022 22:55:13 +0300
+Subject: [PATCH] drv: nvmem: sunxi_sid: Add sunxi_get_soc_chipid,
+ sunxi_get_serial
+
+---
+ drivers/nvmem/sunxi_sid.c | 28 ++++++++++++++++++++++++++++
+ 1 file changed, 28 insertions(+)
+
+diff --git a/drivers/nvmem/sunxi_sid.c b/drivers/nvmem/sunxi_sid.c
+index 37a6abb0e..c81fac63d 100644
+--- a/drivers/nvmem/sunxi_sid.c
++++ b/drivers/nvmem/sunxi_sid.c
+@@ -37,6 +37,25 @@ struct sunxi_sid {
+ 	u32			value_offset;
+ };
+ 
++static unsigned int sunxi_soc_chipid[4];
++static unsigned int sunxi_serial[4];
++
++int sunxi_get_soc_chipid(unsigned char *chipid)
++{
++	memcpy(chipid, sunxi_soc_chipid, 16);
++
++	return 0;
++}
++EXPORT_SYMBOL(sunxi_get_soc_chipid);
++
++int sunxi_get_serial(unsigned       char *serial)
++{
++	memcpy(serial, sunxi_serial, 16);
++
++	return 0;
++}
++EXPORT_SYMBOL(sunxi_get_serial);
++
+ static int sunxi_sid_read(void *context, unsigned int offset,
+ 			  void *val, size_t bytes)
+ {
+@@ -167,6 +186,15 @@ static int sunxi_sid_probe(struct platform_device *pdev)
+ 
+ 	platform_set_drvdata(pdev, nvmem);
+ 
++	nvmem_cfg->reg_read(sid, 0, &sunxi_soc_chipid[0], sizeof(int));
++	nvmem_cfg->reg_read(sid, 4, &sunxi_soc_chipid[1], sizeof(int));
++	nvmem_cfg->reg_read(sid, 8, &sunxi_soc_chipid[2], sizeof(int));
++	nvmem_cfg->reg_read(sid, 12, &sunxi_soc_chipid[3], sizeof(int));
++
++	sunxi_serial[0] = sunxi_soc_chipid[3];
++	sunxi_serial[1] = sunxi_soc_chipid[2];
++	sunxi_serial[2] = (sunxi_soc_chipid[1] >> 16) & 0x0ffff;
++
+ 	return 0;
+ }
+ 
+-- 
+2.35.3
+
+

recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0008-drv-add-sunxi-addr-driver.patch

@@ -0,0 +1,612 @@
+From 418436514e2e64e07e7fd2ef9d77ec4712d1033b Mon Sep 17 00:00:00 2001
+From: pbiel <pbiel7@gmail.com>
+Date: Fri, 24 Feb 2023 10:38:03 +0100
+Subject: [PATCH 2/2] Add sunxi addr driver
+
+---
+ drivers/misc/Kconfig                 |   1 +
+ drivers/misc/Makefile                |   1 +
+ drivers/misc/sunxi-addr/Kconfig      |   6 +
+ drivers/misc/sunxi-addr/Makefile     |   5 +
+ drivers/misc/sunxi-addr/sha256.c     | 178 +++++++++++++
+ drivers/misc/sunxi-addr/sunxi-addr.c | 358 +++++++++++++++++++++++++++
+ 6 files changed, 549 insertions(+)
+ create mode 100644 drivers/misc/sunxi-addr/Kconfig
+ create mode 100644 drivers/misc/sunxi-addr/Makefile
+ create mode 100644 drivers/misc/sunxi-addr/sha256.c
+ create mode 100644 drivers/misc/sunxi-addr/sunxi-addr.c
+
+diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
+index 358ad56f6..c59480dc8 100644
+--- a/drivers/misc/Kconfig
++++ b/drivers/misc/Kconfig
+@@ -514,4 +514,5 @@ source "drivers/misc/habanalabs/Kconfig"
+ source "drivers/misc/uacce/Kconfig"
+ source "drivers/misc/pvpanic/Kconfig"
+ source "drivers/misc/mchp_pci1xxxx/Kconfig"
++source "drivers/misc/sunxi-addr/Kconfig"
+ endmenu
+diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
+index ac9b3e757..487a2bf2d 100644
+--- a/drivers/misc/Makefile
++++ b/drivers/misc/Makefile
+@@ -62,3 +62,4 @@ obj-$(CONFIG_HI6421V600_IRQ)	+= hi6421v600-irq.o
+ obj-$(CONFIG_OPEN_DICE)		+= open-dice.o
+ obj-$(CONFIG_GP_PCI1XXXX)	+= mchp_pci1xxxx/
+ obj-$(CONFIG_VCPU_STALL_DETECTOR)	+= vcpu_stall_detector.o
++obj-$(CONFIG_SUNXI_ADDR_MGT)    += sunxi-addr/
+\ No newline at end of file
+diff --git a/drivers/misc/sunxi-addr/Kconfig b/drivers/misc/sunxi-addr/Kconfig
+new file mode 100644
+index 000000000..801dd2c02
+--- /dev/null
++++ b/drivers/misc/sunxi-addr/Kconfig
+@@ -0,0 +1,6 @@
++config SUNXI_ADDR_MGT
++  tristate "Allwinner Network MAC Addess Manager"
++  depends on BT || ETHERNET || WLAN
++  depends on NVMEM_SUNXI_SID
++  help
++    allwinner network mac address management
+diff --git a/drivers/misc/sunxi-addr/Makefile b/drivers/misc/sunxi-addr/Makefile
+new file mode 100644
+index 000000000..f01fd4783
+--- /dev/null
++++ b/drivers/misc/sunxi-addr/Makefile
+@@ -0,0 +1,5 @@
++#
++# Makefile for wifi mac addr manager drivers
++#
++sunxi_addr-objs := sunxi-addr.o sha256.o
++obj-$(CONFIG_SUNXI_ADDR_MGT)   += sunxi_addr.o
+diff --git a/drivers/misc/sunxi-addr/sha256.c b/drivers/misc/sunxi-addr/sha256.c
+new file mode 100644
+index 000000000..78825810c
+--- /dev/null
++++ b/drivers/misc/sunxi-addr/sha256.c
+@@ -0,0 +1,178 @@
++/*
++ * Local implement of sha256.
++ *
++ * Copyright (C) 2013 Allwinner.
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2.  This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++#include <linux/kernel.h>
++#include <linux/string.h>
++
++/****************************** MACROS ******************************/
++#define ROTRIGHT(a, b) (((a) >> (b)) | ((a) << (32 - (b))))
++#define CH(x, y, z)    (((x) & (y)) ^ (~(x) & (z)))
++#define MAJ(x, y, z)   (((x) & (y)) ^  ((x) & (z)) ^ ((y) & (z)))
++#define EP0(x)         (ROTRIGHT(x,  2) ^ ROTRIGHT(x, 13) ^ ROTRIGHT(x, 22))
++#define EP1(x)         (ROTRIGHT(x,  6) ^ ROTRIGHT(x, 11) ^ ROTRIGHT(x, 25))
++#define SIG0(x)        (ROTRIGHT(x,  7) ^ ROTRIGHT(x, 18) ^ ((x) >> 3))
++#define SIG1(x)        (ROTRIGHT(x, 17) ^ ROTRIGHT(x, 19) ^ ((x) >> 10))
++
++/**************************** VARIABLES *****************************/
++static const uint32_t k[64] = {
++	0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5,
++	0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5,
++	0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3,
++	0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174,
++	0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc,
++	0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da,
++	0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7,
++	0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967,
++	0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13,
++	0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85,
++	0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3,
++	0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070,
++	0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5,
++	0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3,
++	0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208,
++	0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2
++};
++
++struct sha256_ctx {
++	uint8_t data[64];   /* current 512-bit chunk of message data, just like a buffer */
++	uint32_t datalen;   /* sign the data length of current chunk */
++	uint64_t bitlen;    /* the bit length of the total message */
++	uint32_t state[8];  /* store the middle state of hash abstract */
++};
++
++/*********************** FUNCTION DEFINITIONS ***********************/
++static void sha256_transform(struct sha256_ctx *ctx, const uint8_t *data)
++{
++	uint32_t a, b, c, d, e, f, g, h, i, j, t1, t2, m[64];
++
++	/* initialization */
++	for (i = 0, j = 0; i < 16; ++i, j += 4)
++		m[i] = (data[j] << 24) | (data[j + 1] << 16) |
++			(data[j + 2] << 8) | (data[j + 3]);
++	for ( ; i < 64; ++i)
++		m[i] = SIG1(m[i - 2]) + m[i - 7] + SIG0(m[i - 15]) + m[i - 16];
++
++	a = ctx->state[0];
++	b = ctx->state[1];
++	c = ctx->state[2];
++	d = ctx->state[3];
++	e = ctx->state[4];
++	f = ctx->state[5];
++	g = ctx->state[6];
++	h = ctx->state[7];
++
++	for (i = 0; i < 64; ++i) {
++		t1 = h + EP1(e) + CH(e, f, g) + k[i] + m[i];
++		t2 = EP0(a) + MAJ(a, b, c);
++		h = g;
++		g = f;
++		f = e;
++		e = d + t1;
++		d = c;
++		c = b;
++		b = a;
++		a = t1 + t2;
++	}
++
++	ctx->state[0] += a;
++	ctx->state[1] += b;
++	ctx->state[2] += c;
++	ctx->state[3] += d;
++	ctx->state[4] += e;
++	ctx->state[5] += f;
++	ctx->state[6] += g;
++	ctx->state[7] += h;
++}
++
++static void sha256_init(struct sha256_ctx *ctx)
++{
++	ctx->datalen = 0;
++	ctx->bitlen = 0;
++	ctx->state[0] = 0x6a09e667;
++	ctx->state[1] = 0xbb67ae85;
++	ctx->state[2] = 0x3c6ef372;
++	ctx->state[3] = 0xa54ff53a;
++	ctx->state[4] = 0x510e527f;
++	ctx->state[5] = 0x9b05688c;
++	ctx->state[6] = 0x1f83d9ab;
++	ctx->state[7] = 0x5be0cd19;
++}
++
++static void sha256_update(struct sha256_ctx *ctx, const uint8_t *data, size_t len)
++{
++	uint32_t i;
++
++	for (i = 0; i < len; ++i) {
++		ctx->data[ctx->datalen] = data[i];
++		ctx->datalen++;
++		if (ctx->datalen == 64) {
++			/* 64 byte = 512 bit  means the buffer ctx->data has
++			 * fully stored one chunk of message,
++			 * so do the sha256 hash map for the current chunk.
++			 */
++			sha256_transform(ctx, ctx->data);
++			ctx->bitlen += 512;
++			ctx->datalen = 0;
++		}
++	}
++}
++
++static void sha256_final(struct sha256_ctx *ctx, uint8_t *hash)
++{
++	uint32_t i;
++
++	i = ctx->datalen;
++
++	/* Pad whatever data is left in the buffer. */
++	if (ctx->datalen < 56) {
++		ctx->data[i++] = 0x80;  /* pad 10000000 = 0x80 */
++		while (i < 56)
++			ctx->data[i++] = 0x00;
++	} else {
++		ctx->data[i++] = 0x80;
++		while (i < 64)
++			ctx->data[i++] = 0x00;
++		sha256_transform(ctx, ctx->data);
++		memset(ctx->data, 0, 56);
++	}
++
++	/* Append to the padding the total message's length in bits and transform. */
++	ctx->bitlen += ctx->datalen * 8;
++	ctx->data[63] = ctx->bitlen;
++	ctx->data[62] = ctx->bitlen >> 8;
++	ctx->data[61] = ctx->bitlen >> 16;
++	ctx->data[60] = ctx->bitlen >> 24;
++	ctx->data[59] = ctx->bitlen >> 32;
++	ctx->data[58] = ctx->bitlen >> 40;
++	ctx->data[57] = ctx->bitlen >> 48;
++	ctx->data[56] = ctx->bitlen >> 56;
++	sha256_transform(ctx, ctx->data);
++
++	/* copying the final state to the output hash(use big endian). */
++	for (i = 0; i < 4; ++i) {
++		hash[i]      = (ctx->state[0] >> (24 - i * 8)) & 0x000000ff;
++		hash[i + 4]  = (ctx->state[1] >> (24 - i * 8)) & 0x000000ff;
++		hash[i + 8]  = (ctx->state[2] >> (24 - i * 8)) & 0x000000ff;
++		hash[i + 12] = (ctx->state[3] >> (24 - i * 8)) & 0x000000ff;
++		hash[i + 16] = (ctx->state[4] >> (24 - i * 8)) & 0x000000ff;
++		hash[i + 20] = (ctx->state[5] >> (24 - i * 8)) & 0x000000ff;
++		hash[i + 24] = (ctx->state[6] >> (24 - i * 8)) & 0x000000ff;
++		hash[i + 28] = (ctx->state[7] >> (24 - i * 8)) & 0x000000ff;
++	}
++}
++
++int hmac_sha256(const uint8_t *plaintext, ssize_t psize, uint8_t *output)
++{
++	struct sha256_ctx ctx;
++
++	sha256_init(&ctx);
++	sha256_update(&ctx, plaintext, psize);
++	sha256_final(&ctx, output);
++	return 0;
++}
+diff --git a/drivers/misc/sunxi-addr/sunxi-addr.c b/drivers/misc/sunxi-addr/sunxi-addr.c
+new file mode 100644
+index 000000000..a812e4e82
+--- /dev/null
++++ b/drivers/misc/sunxi-addr/sunxi-addr.c
+@@ -0,0 +1,358 @@
++/*
++ * The driver of SUNXI NET MAC ADDR Manager.
++ *
++ * Copyright (C) 2013 Allwinner.
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2.  This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++#define DEBUG
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/miscdevice.h>
++#include <linux/of.h>
++#include <linux/platform_device.h>
++
++#define ADDR_MGT_DBG(fmt, arg...) printk(KERN_DEBUG "[ADDR_MGT] %s: " fmt "\n",\
++				__func__, ## arg)
++#define ADDR_MGT_ERR(fmt, arg...) printk(KERN_ERR "[ADDR_MGT] %s: " fmt "\n",\
++				__func__, ## arg)
++
++#define MODULE_CUR_VERSION  "v1.0.9"
++
++#define MATCH_STR_LEN       20
++#define ADDR_VAL_LEN        6
++#define ADDR_STR_LEN        18
++#define ID_LEN              16
++#define HASH_LEN            32
++
++#define TYPE_ANY            0
++#define TYPE_BURN           1
++#define TYPE_IDGEN          2
++#define TYPE_USER           3
++#define TYPE_RAND           4
++
++#define ADDR_FMT_STR        0
++#define ADDR_FMT_VAL        1
++
++#define IS_TYPE_INVALID(x)  ((x < TYPE_ANY) || (x > TYPE_RAND))
++
++#define ADDR_CLASS_ATTR_ADD(name) \
++static ssize_t addr_##name##_show(struct class *class, \
++		struct class_attribute *attr, char *buffer) \
++{ \
++	char addr[ADDR_STR_LEN]; \
++	if (IS_TYPE_INVALID(get_addr_by_name(ADDR_FMT_STR, addr, #name))) \
++		return 0; \
++	return sprintf(buffer, "%.17s\n", addr); \
++} \
++static ssize_t addr_##name##_store(struct class *class, \
++		struct class_attribute *attr, \
++		const char *buffer, size_t count) \
++{ \
++	if (count != ADDR_STR_LEN) { \
++		ADDR_MGT_ERR("Length wrong."); \
++		return -EINVAL; \
++	} \
++	set_addr_by_name(TYPE_USER, ADDR_FMT_STR, buffer, #name); \
++	return count; \
++} \
++static CLASS_ATTR_RW(addr_##name);
++
++struct addr_mgt_info {
++	unsigned int type_def;
++	unsigned int type_cur;
++	unsigned int flag;
++	char *addr;
++	char *name;
++};
++
++static struct addr_mgt_info info[] = {
++	{TYPE_ANY, TYPE_ANY, 1, NULL, "wifi"},
++	{TYPE_ANY, TYPE_ANY, 0, NULL, "bt"  },
++	{TYPE_ANY, TYPE_ANY, 1, NULL, "eth" },
++};
++
++extern int hmac_sha256(const uint8_t *plaintext, ssize_t psize, uint8_t *output);
++extern int sunxi_get_soc_chipid(unsigned char *chipid);
++
++static int addr_parse(int fmt, const char *addr, int check)
++{
++	char val_buf[ADDR_VAL_LEN];
++	char cmp_buf[ADDR_VAL_LEN];
++	int  ret = ADDR_VAL_LEN;
++
++	if (fmt == ADDR_FMT_STR)
++		ret = sscanf(addr, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
++					&val_buf[0], &val_buf[1], &val_buf[2],
++					&val_buf[3], &val_buf[4], &val_buf[5]);
++	else
++		memcpy(val_buf, addr, ADDR_VAL_LEN);
++
++	if (ret != ADDR_VAL_LEN)
++		return -1;
++
++	if (check && (val_buf[0] & 0x3))
++		return -1;
++
++	memset(cmp_buf, 0x00, ADDR_VAL_LEN);
++	if (memcmp(val_buf, cmp_buf, ADDR_VAL_LEN) == 0)
++		return -1;
++
++	memset(cmp_buf, 0xFF, ADDR_VAL_LEN);
++	if (memcmp(val_buf, cmp_buf, ADDR_VAL_LEN) == 0)
++		return -1;
++
++	return 0;
++}
++
++static struct addr_mgt_info *addr_find_by_name(char *name)
++{
++	int i = 0;
++	for (i = 0; i < ARRAY_SIZE(info); i++) {
++		if (strcmp(info[i].name, name) == 0)
++			return &info[i];
++	}
++	return NULL;
++}
++
++static int get_addr_by_name(int fmt, char *addr, char *name)
++{
++	struct addr_mgt_info *t;
++
++	t = addr_find_by_name(name);
++	if (t == NULL) {
++		ADDR_MGT_ERR("can't find addr named: %s", name);
++		return -1;
++	}
++
++	if (IS_TYPE_INVALID(t->type_cur)) {
++		ADDR_MGT_ERR("addr type invalid");
++		return -1;
++	}
++
++	if (addr_parse(ADDR_FMT_VAL, t->addr, t->flag)) {
++		ADDR_MGT_ERR("addr parse fail(%s)", t->addr);
++		return -1;
++	}
++
++	if (fmt == ADDR_FMT_STR)
++		sprintf(addr, "%02X:%02X:%02X:%02X:%02X:%02X",
++				t->addr[0], t->addr[1], t->addr[2],
++				t->addr[3], t->addr[4], t->addr[5]);
++	else
++		memcpy(addr, t->addr, ADDR_VAL_LEN);
++
++	return t->type_cur;
++}
++
++static int set_addr_by_name(int type, int fmt, const char *addr, char *name)
++{
++	struct addr_mgt_info *t;
++
++	t = addr_find_by_name(name);
++	if (t == NULL) {
++		ADDR_MGT_ERR("can't find addr named: %s", name);
++		return -1;
++	}
++
++	if (addr_parse(fmt, addr, t->flag)) {
++		ADDR_MGT_ERR("addr parse fail(%s)", addr);
++		return -1;
++	}
++
++	t->type_cur = type;
++	if (fmt == ADDR_FMT_STR)
++		sscanf(addr, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
++				&t->addr[0], &t->addr[1], &t->addr[2],
++				&t->addr[3], &t->addr[4], &t->addr[5]);
++	else
++		memcpy(t->addr, addr, ADDR_VAL_LEN);
++
++	return 0;
++}
++
++int get_custom_mac_address(int fmt, char *name, char *addr)
++{
++	return get_addr_by_name(fmt, addr, name);
++}
++EXPORT_SYMBOL_GPL(get_custom_mac_address);
++
++static int addr_factory(struct device_node *np,
++			int idx, int type, char *mac, char *name)
++{
++	int  ret, i;
++	char match[MATCH_STR_LEN];
++	const char *p;
++	char id[ID_LEN], hash[HASH_LEN], cmp_buf[ID_LEN];
++	struct timespec64 curtime;
++
++	switch (type) {
++	case TYPE_BURN:
++		sprintf(match, "addr_%s", name);
++		ret = of_property_read_string_index(np, match, 0, &p);
++		if (ret)
++			return -1;
++
++		ret = sscanf(p, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
++			&mac[0], &mac[1], &mac[2],
++			&mac[3], &mac[4], &mac[5]);
++
++		if (ret != ADDR_VAL_LEN)
++			return -1;
++		break;
++	case TYPE_IDGEN:
++		if (idx > HASH_LEN / ADDR_VAL_LEN - 1)
++			return -1;
++		if (sunxi_get_soc_chipid(id))
++			return -1;
++		memset(cmp_buf, 0x00, ID_LEN);
++		if (memcmp(id, cmp_buf, ID_LEN) == 0)
++			return -1;
++		if (hmac_sha256(id, ID_LEN, hash))
++			return -1;
++		memcpy(mac, &hash[idx * ADDR_VAL_LEN], ADDR_VAL_LEN);
++		break;
++	case TYPE_RAND:
++		for (i = 0; i < ADDR_VAL_LEN; i++) {
++			ktime_get_real_ts64(&curtime);
++			mac[i] = (char)curtime.tv_nsec;
++		}
++		break;
++	default:
++		ADDR_MGT_ERR("unsupport type: %d", type);
++		return -1;
++	}
++	return 0;
++}
++
++static int addr_init(struct platform_device *pdev)
++{
++	struct device_node *np = pdev->dev.of_node;
++	int  type, i, j;
++	char match[MATCH_STR_LEN];
++	char addr[ADDR_VAL_LEN];
++	int  type_tab[] = {TYPE_BURN, TYPE_IDGEN, TYPE_RAND};
++
++	/* init addr type and value */
++	for (i = 0; i < ARRAY_SIZE(info); i++) {
++		sprintf(match, "type_addr_%s", info[i].name);
++		if (of_property_read_u32(np, match, &type)) {
++			ADDR_MGT_DBG("Failed to get type_def_%s, use default: %d",
++						info[i].name, info[i].type_def);
++		} else {
++			info[i].type_def = type;
++			info[i].type_cur = type;
++		}
++
++		if (IS_TYPE_INVALID(info[i].type_def))
++			return -1;
++		if (info[i].type_def != TYPE_ANY) {
++			if (addr_factory(np, i, info[i].type_def, addr, info[i].name))
++				return -1;
++		} else {
++			for (j = 0; j < ARRAY_SIZE(type_tab); j++) {
++				if (!addr_factory(np, i, type_tab[j], addr, info[i].name)) {
++					info[i].type_cur = type_tab[j];
++					break;
++				}
++			}
++		}
++
++		if (info[i].flag)
++			addr[0] &= 0xFC;
++
++		if (addr_parse(ADDR_FMT_VAL, addr, info[i].flag))
++			return -1;
++		else {
++			info[i].addr = devm_kzalloc(&pdev->dev, ADDR_VAL_LEN, GFP_KERNEL);
++			memcpy(info[i].addr, addr, ADDR_VAL_LEN);
++		}
++	}
++	return 0;
++}
++
++static ssize_t summary_show(struct class *class,
++				struct class_attribute *attr, char *buffer)
++{
++	int i = 0, ret = 0;
++
++	ret += sprintf(&buffer[ret], "name cfg cur address\n");
++	for (i = 0; i < ARRAY_SIZE(info); i++) {
++		ret += sprintf(&buffer[ret],
++			"%4s  %d   %d  %02X:%02X:%02X:%02X:%02X:%02X\n",
++			info[i].name,   info[i].type_def, info[i].type_cur,
++			info[i].addr[0], info[i].addr[1], info[i].addr[2],
++			info[i].addr[3], info[i].addr[4], info[i].addr[5]);
++	}
++	return ret;
++}
++static CLASS_ATTR_RO(summary);
++
++ADDR_CLASS_ATTR_ADD(wifi);
++ADDR_CLASS_ATTR_ADD(bt);
++ADDR_CLASS_ATTR_ADD(eth);
++
++static struct attribute *addr_class_attrs[] = {
++	&class_attr_summary.attr,
++	&class_attr_addr_wifi.attr,
++	&class_attr_addr_bt.attr,
++	&class_attr_addr_eth.attr,
++	NULL
++};
++ATTRIBUTE_GROUPS(addr_class);
++
++static struct class addr_class = {
++	.name = "addr_mgt",
++	.owner = THIS_MODULE,
++	.class_groups = addr_class_groups,
++};
++
++static const struct of_device_id addr_mgt_ids[] = {
++	{ .compatible = "allwinner,sunxi-addr_mgt" },
++	{ /* Sentinel */ }
++};
++
++static int addr_mgt_probe(struct platform_device *pdev)
++{
++	int status;
++
++	ADDR_MGT_DBG("module version: %s", MODULE_CUR_VERSION);
++	status = class_register(&addr_class);
++	if (status < 0) {
++		ADDR_MGT_ERR("class register error, status: %d.", status);
++		return -1;
++	}
++
++	if (addr_init(pdev)) {
++		ADDR_MGT_ERR("failed to init addr.");
++		class_unregister(&addr_class);
++		return -1;
++	}
++	ADDR_MGT_DBG("success.");
++	return 0;
++}
++
++static int addr_mgt_remove(struct platform_device *pdev)
++{
++	class_unregister(&addr_class);
++	return 0;
++}
++
++static struct platform_driver addr_mgt_driver = {
++	.probe  = addr_mgt_probe,
++	.remove = addr_mgt_remove,
++	.driver = {
++		.owner = THIS_MODULE,
++		.name  = "sunxi-addr-mgt",
++		.of_match_table = addr_mgt_ids,
++	},
++};
++
++module_platform_driver_probe(addr_mgt_driver, addr_mgt_probe);
++
++MODULE_AUTHOR("Allwinnertech");
++MODULE_DESCRIPTION("Network MAC Addess Manager");
++MODULE_LICENSE("GPL");
+-- 
+2.34.1
+

recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0009-dts-add-addr_mgt-device-tree-node.patch

@@ -0,0 +1,32 @@
+From 706dc6ed092e4a1b9d84893cb4186fbd354bb1c8 Mon Sep 17 00:00:00 2001
+From: pbiel <pbiel7@gmail.com>
+Date: Thu, 26 Jan 2023 09:51:22 +0100
+Subject: [PATCH] Add addr_mgt device tree node
+
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+index d0b95d43a..15f45a3f9 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+@@ -591,5 +591,15 @@ sunxi-info {
+ 			compatible = "allwinner,sun50i-h616-sys-info";
+ 			status = "okay";
+ 		};
++
++		addr_mgt {
++			compatible = "allwinner,sunxi-addr_mgt";
++			type_addr_wifi = <0x00>;
++			type_addr_bt = <0x00>;
++			type_addr_eth = <0x00>;
++			status = "okay";
++			linux,phandle = <0x179>;
++			phandle = <0x179>;
++		};
+ 	};
+ };
+-- 
+2.34.1
+

recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0010-dts-add-wifi-power-regulator.patch

@@ -0,0 +1,70 @@
+From 899da8366afd97b1ca59b632036dc313777026da Mon Sep 17 00:00:00 2001
+From: pbiel <pbiel7@gmail.com>
+Date: Fri, 24 Feb 2023 22:14:58 +0100
+Subject: [PATCH] Add wifi power regulator
+
+---
+ .../allwinner/sun50i-h616-orangepi-zero2.dts  | 47 +++++++++++++++++++
+ 1 file changed, 47 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+index 02893f3ac..88234a139 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+@@ -49,6 +49,53 @@ reg_vcc5v: vcc5v {
+ 		regulator-max-microvolt = <5000000>;
+ 		regulator-always-on;
+ 	};
++
++	reg_vcc33_wifi: vcc33-wifi {
++		/* Always on 3.3V regulator for WiFi and BT */
++		compatible = "regulator-fixed";
++		regulator-name = "vcc33-wifi";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		regulator-always-on;
++		vin-supply = <&reg_vcc5v>;
++	};
++
++	reg_vcc_wifi_io: vcc-wifi-io {
++		/* Always on 1.8V/300mA regulator for WiFi and BT IO */
++		compatible = "regulator-fixed";
++		regulator-name = "vcc-wifi-io";
++		regulator-min-microvolt = <1800000>;
++		regulator-max-microvolt = <1800000>;
++		regulator-always-on;
++		vin-supply = <&reg_vcc33_wifi>;
++	};
++
++	wifi_pwrseq: wifi-pwrseq {
++		compatible = "mmc-pwrseq-simple";
++		clocks = <&rtc 1>;
++		clock-names = "osc32k-out";
++		reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
++		post-power-on-delay-ms = <200>;
++	};
++};
++
++&mmc1 {
++	vmmc-supply = <&reg_vcc33_wifi>;
++	vqmmc-supply = <&reg_vcc_wifi_io>;
++	mmc-pwrseq = <&wifi_pwrseq>;
++	bus-width = <4>;
++	non-removable;
++	mmc-ddr-1_8v;
++	status = "okay";
++	uwe-bsp {
++		compatible = "unisoc,uwe_bsp";
++		keep-power-on;
++		data-irq;
++		//adma-tx;
++		adma-rx;
++		//blksz-512;
++		status = "okay";
++	};
+ };
+ 
+ &emac0 {
+-- 
+2.34.1
+

recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0011-dts-add-usb-to-h616.patch

@@ -0,0 +1,184 @@
+From ab35c98369d50766eb20920a93a2dca927935481 Mon Sep 17 00:00:00 2001
+From: OpenEmbedded <oe.patch@oe>
+Date: Fri, 19 May 2023 23:01:14 +0200
+Subject: [PATCH] Add usb support to h616. This is not needed from kernel 6.2
+
+Signed-off-by: OpenEmbedded <oe.patch@oe>
+---
+ .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 160 ++++++++++++++++++
+ 1 file changed, 160 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+index 04cdec7e2..a1d872e74 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+@@ -504,6 +504,166 @@ mdio0: mdio {
+ 			};
+ 		};
+ 
++		usbotg: usb@5100000 {
++			compatible = "allwinner,sun50i-h616-musb",
++				     "allwinner,sun8i-h3-musb";
++			reg = <0x05100000 0x0400>;
++			clocks = <&ccu CLK_BUS_OTG>;
++			resets = <&ccu RST_BUS_OTG>;
++			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
++			interrupt-names = "mc";
++			phys = <&usbphy 0>;
++			phy-names = "usb";
++			extcon = <&usbphy 0>;
++			status = "disabled";
++		};
++
++		usbphy: phy@5100400 {
++			compatible = "allwinner,sun50i-h616-usb-phy";
++			reg = <0x05100400 0x24>,
++			      <0x05101800 0x14>,
++			      <0x05200800 0x14>,
++			      <0x05310800 0x14>,
++			      <0x05311800 0x14>;
++			reg-names = "phy_ctrl",
++				    "pmu0",
++				    "pmu1",
++				    "pmu2",
++				    "pmu3";
++			clocks = <&ccu CLK_USB_PHY0>,
++				 <&ccu CLK_USB_PHY1>,
++				 <&ccu CLK_USB_PHY2>,
++				 <&ccu CLK_USB_PHY3>,
++				 <&ccu CLK_BUS_EHCI2>;
++			clock-names = "usb0_phy",
++				      "usb1_phy",
++				      "usb2_phy",
++				      "usb3_phy",
++				      "pmu2_clk";
++			resets = <&ccu RST_USB_PHY0>,
++				 <&ccu RST_USB_PHY1>,
++				 <&ccu RST_USB_PHY2>,
++				 <&ccu RST_USB_PHY3>;
++			reset-names = "usb0_reset",
++				      "usb1_reset",
++				      "usb2_reset",
++				      "usb3_reset";
++			status = "disabled";
++			#phy-cells = <1>;
++		};
++
++		ehci0: usb@5101000 {
++			compatible = "allwinner,sun50i-h616-ehci",
++				     "generic-ehci";
++			reg = <0x05101000 0x100>;
++			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
++			clocks = <&ccu CLK_BUS_OHCI0>,
++				 <&ccu CLK_BUS_EHCI0>,
++				 <&ccu CLK_USB_OHCI0>;
++			resets = <&ccu RST_BUS_OHCI0>,
++				 <&ccu RST_BUS_EHCI0>;
++			phys = <&usbphy 0>;
++			phy-names = "usb";
++			status = "disabled";
++		};
++
++		ohci0: usb@5101400 {
++			compatible = "allwinner,sun50i-h616-ohci",
++				     "generic-ohci";
++			reg = <0x05101400 0x100>;
++			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
++			clocks = <&ccu CLK_BUS_OHCI0>,
++				 <&ccu CLK_USB_OHCI0>;
++			resets = <&ccu RST_BUS_OHCI0>;
++			phys = <&usbphy 0>;
++			phy-names = "usb";
++			status = "disabled";
++		};
++
++		ehci1: usb@5200000 {
++			compatible = "allwinner,sun50i-h616-ehci",
++				     "generic-ehci";
++			reg = <0x05200000 0x100>;
++			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
++			clocks = <&ccu CLK_BUS_OHCI1>,
++				 <&ccu CLK_BUS_EHCI1>,
++				 <&ccu CLK_USB_OHCI1>;
++			resets = <&ccu RST_BUS_OHCI1>,
++				 <&ccu RST_BUS_EHCI1>;
++			phys = <&usbphy 1>;
++			phy-names = "usb";
++			status = "disabled";
++		};
++
++		ohci1: usb@5200400 {
++			compatible = "allwinner,sun50i-h616-ohci",
++				     "generic-ohci";
++			reg = <0x05200400 0x100>;
++			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
++			clocks = <&ccu CLK_BUS_OHCI1>,
++				 <&ccu CLK_USB_OHCI1>;
++			resets = <&ccu RST_BUS_OHCI1>;
++			phys = <&usbphy 1>;
++			phy-names = "usb";
++			status = "disabled";
++		};
++
++		ehci2: usb@5310000 {
++			compatible = "allwinner,sun50i-h616-ehci",
++				     "generic-ehci";
++			reg = <0x05310000 0x100>;
++			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
++			clocks = <&ccu CLK_BUS_OHCI2>,
++				 <&ccu CLK_BUS_EHCI2>,
++				 <&ccu CLK_USB_OHCI2>;
++			resets = <&ccu RST_BUS_OHCI2>,
++				 <&ccu RST_BUS_EHCI2>;
++			phys = <&usbphy 2>;
++			phy-names = "usb";
++			status = "disabled";
++		};
++
++		ohci2: usb@5310400 {
++			compatible = "allwinner,sun50i-h616-ohci",
++				     "generic-ohci";
++			reg = <0x05310400 0x100>;
++			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
++			clocks = <&ccu CLK_BUS_OHCI2>,
++				 <&ccu CLK_USB_OHCI2>;
++			resets = <&ccu RST_BUS_OHCI2>;
++			phys = <&usbphy 2>;
++			phy-names = "usb";
++			status = "disabled";
++		};
++
++		ehci3: usb@5311000 {
++			compatible = "allwinner,sun50i-h616-ehci",
++				     "generic-ehci";
++			reg = <0x05311000 0x100>;
++			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
++			clocks = <&ccu CLK_BUS_OHCI3>,
++				 <&ccu CLK_BUS_EHCI3>,
++				 <&ccu CLK_USB_OHCI3>;
++			resets = <&ccu RST_BUS_OHCI3>,
++				 <&ccu RST_BUS_EHCI3>;
++			phys = <&usbphy 3>;
++			phy-names = "usb";
++			status = "disabled";
++		};
++
++		ohci3: usb@5311400 {
++			compatible = "allwinner,sun50i-h616-ohci",
++				     "generic-ohci";
++			reg = <0x05311400 0x100>;
++			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
++			clocks = <&ccu CLK_BUS_OHCI3>,
++				 <&ccu CLK_USB_OHCI3>;
++			resets = <&ccu RST_BUS_OHCI3>;
++			phys = <&usbphy 3>;
++			phy-names = "usb";
++			status = "disabled";
++		};
++
+ 		rtc: rtc@7000000 {
+ 			compatible = "allwinner,sun50i-h616-rtc";
+ 			reg = <0x07000000 0x400>;
+-- 
+2.40.1
+

recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0012-dts-orange-pi-zero2.patch

@@ -0,0 +1,84 @@
+From 038441bbe0f6dab3e701061c514a8d776dbe6523 Mon Sep 17 00:00:00 2001
+From: OpenEmbedded <oe.patch@oe>
+Date: Sat, 20 May 2023 14:07:47 +0200
+Subject: [PATCH] DTS orange pi zero2 enable usb
+
+Signed-off-by: OpenEmbedded <oe.patch@oe>
+---
+ .../allwinner/sun50i-h616-orangepi-zero2.dts  | 42 +++++++++++++++++++
+ 1 file changed, 42 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+index 88234a139..3b836296b 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+@@ -50,6 +50,16 @@ reg_vcc5v: vcc5v {
+ 		regulator-always-on;
+ 	};
+ 
++        reg_usb1_vbus: regulator-usb1-vbus {
++                compatible = "regulator-fixed";
++                regulator-name = "usb1-vbus";
++                regulator-min-microvolt = <5000000>;
++                regulator-max-microvolt = <5000000>;
++                vin-supply = <&reg_vcc5v>;
++                enable-active-high;
++                gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
++        };
++
+ 	reg_vcc33_wifi: vcc33-wifi {
+ 		/* Always on 3.3V regulator for WiFi and BT */
+ 		compatible = "regulator-fixed";
+@@ -79,6 +89,12 @@ wifi_pwrseq: wifi-pwrseq {
+ 	};
+ };
+ 
++&ehci1 {
++        status = "okay";
++};
++
++/* USB 2 & 3 are on headers only. */
++
+ &mmc1 {
+ 	vmmc-supply = <&reg_vcc33_wifi>;
+ 	vqmmc-supply = <&reg_vcc_wifi_io>;
+@@ -123,6 +139,11 @@ &mmc0 {
+ 	status = "okay";
+ };
+ 
++
++&ohci1 {
++	status = "okay";
++};
++
+ &r_rsb {
+ 	status = "okay";
+ 
+@@ -258,3 +279,24 @@ &uart0 {
+ 	pinctrl-0 = <&uart0_ph_pins>;
+ 	status = "okay";
+ };
++
++&usbotg {
++	/*
++	 * PHY0 pins are connected to a USB-C socket, but a role switch
++	 * is not implemented: both CC pins are pulled to GND.
++	 * The VBUS pins power the device, so a fixed peripheral mode
++	 * is the best choice.
++	 * The board can be powered via GPIOs, in this case port0 *can*
++	 * act as a host (with a cable/adapter ignoring CC), as VBUS is
++	 * then provided by the GPIOs. Any user of this setup would
++	 * need to adjust the DT accordingly: dr_mode set to "host",
++	 * enabling OHCI0 and EHCI0.
++	 */
++	dr_mode = "peripheral";
++	status = "okay";
++};
++
++&usbphy {
++	usb1_vbus-supply = <&reg_usb1_vbus>;
++	status = "okay";
++};
+-- 
+2.40.1
+