dany/meta-sunxi
1
0
Fork 0
mirror of https://github.com/linux-sunxi/meta-sunxi.git synced 2024-06-26 17:29:47 +02:00
Code Issues Packages Projects Releases Wiki Activity
Official sunxi OpenEmbedded layer for Allwinner-based boards.
443 Commits 30 Branches 0 Tags 12 MiB
C 64.8%
BitBake 18.8%
PHP 10%
C++ 3.6%
Batchfile 1.6%
Other 1.1%
e85a48c611
Go to file
Sergey Matyukevich e85a48c611 linux: enable sun50i support 
There is no common kernel defconfig for both arm and aarch64.
Create separate kernel defconfigs in arm and aarch64 subdirectories.
Proper defconfig will be selected in build time
according to target architecture.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
2017-12-03 22:28:10 +03:00
classes sdcard_image-sunxi.bbclass: fix deprecated notation 2017-07-17 09:01:30 -04:00
conf u-boot: enable support for sun50i 2017-12-03 22:24:12 +03:00
recipes-bsp u-boot: enable support for sun50i 2017-12-03 22:24:12 +03:00
recipes-devtools/python pypi requires a https connection 2017-10-27 13:46:41 +02:00
recipes-graphics Disables tslib 2017-02-13 09:39:29 +00:00
recipes-kernel/linux linux: enable sun50i support 2017-12-03 22:28:10 +03:00
recipes-multimedia/gstreamer gst-plugin-cedar: import PoC gstreamer 0.10 plugin 2014-01-16 13:52:23 +01:00
recipes-support/sunxi-tools PR reset to 0 2017-04-01 16:02:53 +01:00
COPYING.MIT allwinner-a10: initial import. 2012-06-03 19:47:57 +02:00
README.md README.md: Clean up build instructions 2016-11-26 12:38:44 +11:00

README.md

meta-sunxi

Official sunxi OpenEmbedded layer for Allwinner-based boards.

This layer depends on the additional layer:

meta-openembedded: git://git.openembedded.org/meta-openembedded

Tested with core-image-base.

Maintainers:

Kernel / U-Boot Version

Most Allwinner devices and hardware are supported in mainline kernel and U-Boot, so this layer builds mainline by default. There is a custom U-Boot and Kernel version for sunxi devices which includes some special drivers not mainlined. These versions are rather old (3.4 for kernel and 2014.04 for U-Boot), but may support more functions and devices than current mainline

If you want to switch back to sunxi versions for some reasons (no device tree available, unsupported hardware), either:

  • change the file conf/machine/include/sunxi.inc to include the following block

  • edit your conf/local.conf to add the following block

    PREFERRED_PROVIDER_u-boot="u-boot-sunxi" PREFERRED_PROVIDER_virtual/bootloader="u-boot-sunxi" PREFERRED_PROVIDER_virtual/kernel="linux-sunxi"

If you already have built the mainline versions it might be necessary to reset the build directories with:

bitbake -c clean linux u-boot

Performance

The default machine settings are meant to be the lowest common denominator, maximizing generality. Significantly better performance (2x-3x) can be achieved with the following settings:

Allwinner A20

For Allwinner A20 (Cubieboard2/CubieTruck), the following tuning options are recommended:

Enable hardfloat, thumb2 and neon capabilities

DEFAULTTUNE = "cortexa7hf-neon-vfpv4"

This tuning profile takes advantage of the Allwinner A20 hardfloat, neon and vfpv4 capabilities.

Change CPU governor to ondemand, and tune settings

echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
echo 336000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
echo 912000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
#More aggressive
#echo 1008000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
echo 40 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
echo 200000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate

This code changes the default CPU governor from fantasy to ondemand, and tunes its settings, as recommended at http://linux-sunxi.org/Cpufreq

For additional discussion, see https://github.com/linux-sunxi/meta-sunxi/issues/25