linux-mainline: Added LINUX_VERSION variable

Fixes:

File "/home/retpolanne/Dev/orange-pi-one-plus-image/poky/scripts/lib/devtool/standard.py", line 839, in modify
if (os.path.exists(srcdir) and os.listdir(srcdir)) and (kernelVersion in staging_kerVer and staging_kbranch == kbranch):
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
TypeError: 'in ' requires string as left operand, not NoneType

While running devtool modify virtual/kernel.


Signed-off-by: Marek Belisko <marek.belisko@gmail.com>

README.md

@@ -3,9 +3,10 @@ meta-sunxi
 
 Official sunxi OpenEmbedded layer for Allwinner-based boards.
 
-This layer depends on the additional layer:
+This layer depends on the additional layers:
 
-meta-openembedded: git://git.openembedded.org/meta-openembedded
+* [meta-openembedded/meta-oe](http://git.openembedded.org/meta-openembedded/tree/meta-oe)
+* [meta-arm](https://git.yoctoproject.org/meta-arm)
 
 Tested with core-image-base.
 
@@ -14,8 +15,46 @@ Maintainers:
 * Nicolas Aguirre <aguirre.nicolas@gmail.com>
 * Enrico Butera <ebutera@users.sourceforge.net>
 * Sergey Lapin <slapin@ossfans.org>
+* Marek Belisko <marek.belisko@gmail.com>
 
+Community
+===========
 
+You can reach community + ask your question on gitter: https://matrix.to/#/#meta-sunxi:gitter.im
+
+Kernel / U-Boot Version
+===========
+Most Allwinner devices and hardware are supported in mainline kernel and U-Boot, so this layer builds mainline by default.
+
+Legacy sunxi Kernel / U-Boot
+-----------
+
+There is a custom U-Boot and Kernel version for sunxi devices which includes some special drivers not mainlined.
+These versions are rather old (3.4 for kernel and 2014.04 for U-Boot), but may support more functions and devices than current mainline.
+
+If you want to switch back to sunxi versions for some reasons (no device tree available, unsupported hardware), either:
+- change the file conf/machine/include/sunxi.inc to include the following block
+- edit your conf/local.conf to add the following block
+
+		PREFERRED_PROVIDER_u-boot="u-boot-sunxi"
+		PREFERRED_PROVIDER_virtual/bootloader="u-boot-sunxi"
+		PREFERRED_PROVIDER_virtual/kernel="linux-sunxi"
+		KERNEL_DEVICETREE = ""
+
+If you already have built the mainline versions it might be necessary to reset the build directories with:
+
+	bitbake -c clean virtual/kernel virtual/bootloader
+
+Mainline Kernel / U-Boot
+-----------
+
+For mainline kernel we have now support for latest LTS and stable.
+By default we use latest LTS. If you would like to change version please update ```PREFERRED_VERSION_linux-mainline``` in:
+* [conf/machine/include/sunxi.inc](https://github.com/linux-sunxi/meta-sunxi/blob/fa0846c0eb23e3424b89acb4d5a327e921f73497/conf/machine/include/sunxi.inc#L16)
+
+When using mainline kernel ≥ 5.2 it is now possible to use the mainline graphics drivers *lima* and *panfrost*, instead of the *mali* driver provided by ARM. To enable open source mainline graphics support add the following line in your `local.conf`:
+
+    MACHINEOVERRIDES .= ":use-mailine-graphics"
 
 Performance
 ===========

classes/sdcard_image-sunxi.bbclass

@@ -1,93 +0,0 @@
-inherit image_types
-
-#
-# Create an image that can by written onto a SD card using dd.
-# Originally written for rasberrypi adapt for the needs of allwinner sunxi based boards
-#
-# The disk layout used is:
-#
-#    0                      -> 8*1024                           - reserverd
-#    8*1024                 -> 32*1024                          - 
-#    32*1024                -> 2048*1024                        - 
-#    2048*1024              -> BOOT_SPACE                       - bootloader and kernel
-#
-#
-
-# This image depends on the rootfs image
-IMAGE_TYPEDEP_sunxi-sdimg = "${SDIMG_ROOTFS_TYPE}"
-
-# Boot partition volume id
-BOOTDD_VOLUME_ID ?= "${MACHINE}"
-
-# Boot partition size [in KiB]
-BOOT_SPACE ?= "20480"
-
-# First partition begin at sector 2048 : 2048*1024 = 2097152
-IMAGE_ROOTFS_ALIGNMENT = "2048"
-
-# Use an uncompressed ext3 by default as rootfs
-SDIMG_ROOTFS_TYPE ?= "ext3"
-SDIMG_ROOTFS = "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.${SDIMG_ROOTFS_TYPE}"
-
-IMAGE_DEPENDS_sunxi-sdimg += " \
-			parted-native \
-			mtools-native \
-			dosfstools-native \
-			virtual/kernel \
-			virtual/bootloader \
-                        sunxi-board-fex \
-			"
-
-rootfs[depends] += "sunxi-board-fex:do_deploy"
-
-# SD card image name
-SDIMG = "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.sunxi-sdimg"
-
-IMAGEDATESTAMP = "${@time.strftime('%Y.%m.%d',time.gmtime())}"
-
-IMAGE_CMD_sunxi-sdimg () {
-
-	# Align partitions
-	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
-	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT})
-	SDIMG_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $ROOTFS_SIZE + ${IMAGE_ROOTFS_ALIGNMENT})
-
-	# Initialize sdcard image file
-	dd if=/dev/zero of=${SDIMG} bs=1 count=0 seek=$(expr 1024 \* ${SDIMG_SIZE})
-
-	# Create partition table
-	parted -s ${SDIMG} mklabel msdos
-	# Create boot partition and mark it as bootable
-	parted -s ${SDIMG} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT})
-	parted -s ${SDIMG} set 1 boot on
-	# Create rootfs partition
-	parted -s ${SDIMG} unit KiB mkpart primary ext2 $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT}) $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT} \+ ${ROOTFS_SIZE})
-	parted ${SDIMG} print
-
-	# Create a vfat image with boot files
-	BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }')
-	mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
-	mcopy -i ${WORKDIR}/boot.img -s ${STAGING_DIR_HOST}/usr/src/kernel/${KERNEL_IMAGETYPE} ::uImage
-	if [ -e "${DEPLOY_DIR_IMAGE}/fex.bin" ]
-	then
-		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/fex.bin ::script.bin
-	fi
-
-	# Add stamp file
-	echo "${IMAGE_NAME}-${IMAGEDATESTAMP}" > ${WORKDIR}/image-version-info
-	mcopy -i ${WORKDIR}/boot.img -v ${WORKDIR}//image-version-info ::
-
-	# Burn Partitions
-	dd if=${WORKDIR}/boot.img of=${SDIMG} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
-	# If SDIMG_ROOTFS_TYPE is a .xz file use xzcat
-	if echo "${SDIMG_ROOTFS_TYPE}" | egrep -q "*\.xz"
-	then
-		xzcat ${SDIMG_ROOTFS} | dd of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
-	else
-		dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
-	fi
-
-	#write u-boot and spl at the beginint of sdcard in one shot
-	dd if=${DEPLOY_DIR_IMAGE}/u-boot-sunxi-with-spl.bin of=${SDIMG} bs=1024 seek=8 conv=notrunc
-
-}

conf/layer.conf

@@ -4,6 +4,14 @@ BBPATH .= ":${LAYERDIR}"
 # We have a recipes directory, add to BBFILES
 BBFILES += "${LAYERDIR}/recipes*/*/*.bb ${LAYERDIR}/recipes*/*/*.bbappend"
 
-BBFILE_COLLECTIONS += "meta-sunxi"
-BBFILE_PATTERN_meta-sunxi := "^${LAYERDIR}/"
-BBFILE_PRIORITY_meta-sunxi = "10"
+BBFILE_COLLECTIONS += "sunxi"
+BBFILE_PATTERN_sunxi := "^${LAYERDIR}/"
+BBFILE_PRIORITY_sunxi = "10"
+
+# This should only be incremented on significant changes that will
+# cause compatibility issues with other layers
+LAYERVERSION_sunxi = "1"
+
+LAYERDEPENDS_sunxi = "core meta-python meta-arm"
+
+LAYERSERIES_COMPAT_sunxi = "honister kirkstone langdale mickledore nanbield"

conf/machine/bananapi-m2-zero.conf

@@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: bananapi-m2-zero
+#@DESCRIPTION: Machine configuration for the Banana Pi M2 Zero, base on Allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+require conf/machine/include/hardware/ap6212a.inc
+
+KERNEL_DEVICETREE = "sun8i-h2-plus-bananapi-m2-zero.dtb"
+UBOOT_MACHINE = "bananapi_m2_zero_defconfig"
+

conf/machine/bananapi-m2m.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: bananapi-m2m
+#@DESCRIPTION: Machine configuration for the Banana Pi M2M, base on Allwinner H8 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-r16-bananapi-m2m.dtb"
+UBOOT_MACHINE = "Bananapi_m2m_defconfig"
+

conf/machine/bananapi-m2plus.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: bananapi-m2plus
+#@DESCRIPTION: Machine configuration for the Banana Pi M2+, base on Allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-bananapi-m2-plus.dtb"
+UBOOT_MACHINE = "bananapi_m2_plus_h3_defconfig"
+

conf/machine/bananapi-m64.conf

@@ -0,0 +1,8 @@
+#@TYPE: Machine
+#@NAME: pine64-plus
+#@DESCRIPTION: Machine configuration for the pine64-plus, based on Allwinner A64 CPU
+
+require conf/machine/include/sun50i.inc
+
+KERNEL_DEVICETREE = "allwinner/sun50i-a64-bananapi-m64.dtb"
+UBOOT_MACHINE = "bananapi_m64_defconfig"

conf/machine/bananapi.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: Bananapi
+#@DESCRIPTION: Machine configuration for the bananapi, based on allwinner A20 CPU http://bananapi.org/
+
+require conf/machine/include/sun7i.inc
+
+KERNEL_DEVICETREE = "sun7i-a20-bananapi.dtb"
+UBOOT_MACHINE = "Bananapi_config"
+SUNXI_FEX_FILE = "sys_config/a20/Bananapi.fex"

conf/machine/cubieboard.conf

@@ -2,17 +2,8 @@
 #@NAME: CubieBoard
 #@DESCRIPTION: Machine configuration for the cubieboard, based on allwinner a10 CPU http://cubieboard.org/
 
-# Only has DVI connector for external screen
-GUI_MACHINE_CLASS = "bigscreen"
-
-require conf/machine/include/tune-cortexa8.inc
-require conf/machine/include/sunxi.inc
-require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/sun4i.inc
 
+KERNEL_DEVICETREE = "sun4i-a10-cubieboard.dtb"
 UBOOT_MACHINE = "Cubieboard_config"
-UBOOT_ENTRYPOINT = "0x40008000"
-UBOOT_LOADADDRESS = "0x40008000"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"
+SUNXI_FEX_FILE = "sys_config/a10/cubieboard.fex"

conf/machine/cubieboard2.conf

@@ -2,17 +2,8 @@
 #@NAME: CubieBoard2
 #@DESCRIPTION: Machine configuration for the cubieboard2, based on allwinner A20 CPU http://cubieboard.org/
 
-# Only has DVI connector for external screen
-GUI_MACHINE_CLASS = "bigscreen"
-
-require conf/machine/include/tune-cortexa7.inc
-require conf/machine/include/sunxi.inc
-require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/sun7i.inc
 
+KERNEL_DEVICETREE = "sun7i-a20-cubieboard2.dtb"
 UBOOT_MACHINE = "Cubieboard2_config"
-UBOOT_ENTRYPOINT = "0x40008000"
-UBOOT_LOADADDRESS = "0x40008000"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-MACHINE_FEATURES = "screen apm usbgadget usbhost vfat"
+SUNXI_FEX_FILE = "sys_config/a20/cubieboard2.fex"

conf/machine/cubietruck.conf

@@ -2,17 +2,8 @@
 #@NAME: Cubietruck
 #@DESCRIPTION: Machine configuration for the Cubietruck, based on allwinner A20 CPU http://cubieboard.org/
 
-# Only has DVI connector for external screen
-GUI_MACHINE_CLASS = "bigscreen"
-
-require conf/machine/include/tune-cortexa7.inc
-require conf/machine/include/sunxi.inc
-require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/sun7i.inc
 
+KERNEL_DEVICETREE = "sun7i-a20-cubietruck.dtb"
 UBOOT_MACHINE = "Cubietruck_config"
-UBOOT_ENTRYPOINT = "0x40008000"
-UBOOT_LOADADDRESS = "0x40008000"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-MACHINE_FEATURES = "screen apm usbgadget usbhost vfat"
+SUNXI_FEX_FILE = "sys_config/a20/cubietruck.fex"

conf/machine/forfun-q88db.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: Forfun Q88DB
+#@DESCRIPTION: Machine configuration for the Forfun Q88DB Tablet with A13 CPU
+#http://linux-sunxi.org/Forfun_Q88DB
+
+require conf/machine/include/sun5i.inc
+
+UBOOT_MACHINE = "forfun_q88db_defconfig"
+SUNXI_FEX_FILE = "sys_config/a13/forfun_q88db.fex"

conf/machine/include/hardware/ap6212a.inc

@@ -0,0 +1,5 @@
+# Include for boards with AMPAK 6212A Wifi / Bluetooth module
+# https://linux-sunxi.org/Wifi#Ampak
+
+MACHINE_EXTRA_RRECOMMENDS:append = " kernel-module-brcmfmac"
+MACHINE_EXTRA_RDEPENDS:append = " linux-firmware-bcm43430"

conf/machine/include/sun4i.inc

@@ -0,0 +1,5 @@
+require conf/machine/include/sunxi.inc
+require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/arm/armv7a/tune-cortexa8.inc
+
+SOC_FAMILY = "sun4i"

conf/machine/include/sun50i-h6.inc

@@ -0,0 +1,8 @@
+require conf/machine/include/sunxi64.inc
+
+DEFAULTTUNE ?= "cortexa53-crypto"
+require conf/machine/include/arm/armv8a/tune-cortexa53.inc
+
+MACHINEOVERRIDES =. "sun50i:"
+
+SOC_FAMILY = "sun50i-h6"

conf/machine/include/sun50i-h616.inc

@@ -0,0 +1,8 @@
+require conf/machine/include/sunxi64.inc
+
+DEFAULTTUNE ?= "cortexa53-crypto"
+require conf/machine/include/arm/armv8a/tune-cortexa53.inc
+
+MACHINEOVERRIDES =. "sun50i:"
+
+SOC_FAMILY = "sun50i-h616"

conf/machine/include/sun50i.inc

@@ -0,0 +1,6 @@
+require conf/machine/include/sunxi64.inc
+
+DEFAULTTUNE ?= "cortexa53-crypto"
+require conf/machine/include/arm/armv8a/tune-cortexa53.inc
+
+SOC_FAMILY = "sun50i"

conf/machine/include/sun5i.inc

@@ -0,0 +1,5 @@
+require conf/machine/include/sunxi.inc
+require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/arm/armv7a/tune-cortexa8.inc
+
+SOC_FAMILY = "sun5i"

conf/machine/include/sun7i.inc

@@ -0,0 +1,5 @@
+require conf/machine/include/sunxi.inc
+require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/arm/armv7a/tune-cortexa7.inc
+
+SOC_FAMILY = "sun7i"

conf/machine/include/sun8i.inc

@@ -0,0 +1,5 @@
+require conf/machine/include/sunxi.inc
+require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/arm/armv7a/tune-cortexa7.inc
+
+SOC_FAMILY = "sun8i"

conf/machine/include/sunxi-mali-driver.inc

@@ -0,0 +1,15 @@
+PREFERRED_PROVIDER_virtual/mesa ?= "mesa-gl"
+PREFERRED_PROVIDER_virtual/libgl ?= "mesa-gl"
+PREFERRED_PROVIDER_virtual/libgles1 ?= "sunxi-mali"
+PREFERRED_PROVIDER_virtual/libgles2 ?= "sunxi-mali"
+PREFERRED_PROVIDER_virtual/egl ?= "sunxi-mali"
+
+PACKAGECONFIG:remove:pn-xserver-xorg = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'glamor', '', d)}"
+
+XSERVER += "sunxi-mali \
+            sunxi-mali-dev"
+
+MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "\
+ kernel-module-mali \
+ kernel-module-mali-drm \
+  "

conf/machine/include/sunxi-mali.inc

@@ -1,13 +1,5 @@
-PREFERRED_PROVIDER_virtual/mesa ?= "mesa-gl"
-PREFERRED_PROVIDER_virtual/libgl ?= "mesa-gl"
-PREFERRED_PROVIDER_virtual/libgles1 ?= "sunxi-mali"
-PREFERRED_PROVIDER_virtual/libgles2 ?= "sunxi-mali"
-PREFERRED_PROVIDER_virtual/egl ?= "sunxi-mali"
-
-XSERVER += "sunxi-mali \
-            sunxi-mali-dev"
-
-MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "\
- kernel-module-mali \
- kernel-module-mali-drm \
-  "
+# The "sunxi-mailine-graphics-drivers.inc" doesn't exist, but it can be created
+# in the future if needed.  Using include directive ensures build doesn't fail
+# if .inc file doesn't exist:
+# https://www.yoctoproject.org/pipermail/yocto/2019-August/046484.html
+include ${@'sunxi-mali-driver.inc' if 'use-mailine-graphics' not in d.getVar("MACHINEOVERRIDES").split(":") else 'sunxi-mailine-graphics-drivers.inc' }

conf/machine/include/sunxi.inc

@@ -1,16 +1,47 @@
+SOC_FAMILY ??= ""
+include conf/machine/include/soc-family.inc
+
+MACHINEOVERRIDES =. "sunxi:"
+
+# Sub-architecture support
+MACHINE_SOCARCH_SUFFIX ?= ""
+MACHINE_SOCARCH_SUFFIX_sun4i = "-sun4i"
+
 PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
 XSERVER = "xserver-xorg \
-           xf86-video-fbturbo \
            xf86-input-evdev \
            xf86-input-mouse \
            xf86-input-keyboard"
 
-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_VERSION_linux-libc-headers = "3.4.61"
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
+PREFERRED_VERSION_linux-mainline ?= "6.5.%"
+PREFERRED_PROVIDER_u-boot ?= "u-boot"
+PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
 
-KERNEL_IMAGETYPE = "uImage"
+KERNEL_IMAGETYPE ?= "uImage"
 
-IMAGE_CLASSES += "sdcard_image-sunxi"
-IMAGE_FSTYPES += "ext3 tar.gz sunxi-sdimg"
+IMAGE_FSTYPES += "ext3 tar.gz wic.gz wic.bmap"
 
 MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"
+
+UBOOT_LOCALVERSION = "-g${@d.getVar('SRCPV', True).partition('+')[2][0:7]}"
+
+UBOOT_ENTRYPOINT ?= "0x40008000"
+
+SPL_BINARY ?= "u-boot-sunxi-with-spl.bin"
+
+SERIAL_CONSOLES ?= "115200;ttyS0"
+MACHINE_FEATURES ?= "alsa apm keyboard rtc serial screen usbgadget usbhost vfat"
+
+# Mimic the sdcard_image-sunxi.bbclass
+# image-version-info file was also generated and installed to boot partition,
+# but it is missing here - can be added somehow (how?) if required
+SUNXI_FEX_FILE ?= " "
+SUNXI_BOOT_SPACE ?= "40"
+IMAGE_BOOT_FILES ?= "${KERNEL_IMAGETYPE} boot.scr"
+# ship fex file for sunxi kernel, devicetree file for mainline kernel
+IMAGE_BOOT_FILES += "${@bb.utils.contains('PREFERRED_PROVIDER_virtual/kernel', 'linux-sunxi', '${SUNXI_FEX_FILE}', '${KERNEL_DEVICETREE}', d)}"
+WKS_FILES ?= "sunxi-sdcard-image.wks.in"
+WKS_FILE_DEPENDS ?= "virtual/kernel u-boot"
+# in case of sunxi kernel, sunxi-board-fex must be built prior wic image assembly
+WKS_FILE_DEPENDS += " ${@bb.utils.contains('PREFERRED_PROVIDER_virtual/kernel', 'linux-sunxi', 'sunxi-board-fex', '', d)}"

conf/machine/include/sunxi64.inc

@@ -0,0 +1,51 @@
+SOC_FAMILY ??= ""
+include conf/machine/include/soc-family.inc
+
+MACHINEOVERRIDES =. "sunxi:sunxi64:"
+
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
+PREFERRED_PROVIDER_u-boot ?= "u-boot"
+PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
+
+KERNEL_IMAGETYPE ?= "Image"
+
+IMAGE_FSTYPES += "ext4 tar.gz wic.gz wic.bmap"
+
+MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"
+
+UBOOT_LOCALVERSION = "-g${@d.getVar('SRCPV', True).partition('+')[2][0:7]}"
+
+UBOOT_ENTRYPOINT ?= "0x40008000"
+UBOOT_LOADADDRESS ?= "0x400080OB00"
+
+#UBOOT_BINARY ?= "u-boot.itb"
+SPL_BINARY ?= "u-boot-sunxi-with-spl.bin"
+
+SERIAL_CONSOLES ?= "115200;ttyS0"
+MACHINE_FEATURES ?= "alsa apm keyboard rtc serial screen usbgadget usbhost vfat"
+
+# arm64 dbts are under <vendor>/dts but is deployed under DEPLOYDIR 
+do_fix_device_tree_location() {
+
+    for kdt in ${KERNEL_DEVICETREE}
+    do
+        local dbt_dir=$(dirname ${kdt})
+        if [ "." != "${dbt_dir}" ] ; then
+            local dbt=$(basename ${kdt})
+            local dst=${DEPLOY_DIR_IMAGE}/${dbt_dir}/${dbt}
+            if [ ! -f ${dst} ] ; then
+                mkdir -p ${DEPLOY_DIR_IMAGE}/$dbt_dir
+                ln -s ${DEPLOY_DIR_IMAGE}/${dbt} ${dst}
+            fi
+        fi
+    done
+}
+
+
+addtask do_fix_device_tree_location after do_write_wks_template before do_image_wic
+
+SUNXI_BOOT_SPACE ?= "40"
+IMAGE_BOOT_FILES ?= "${KERNEL_IMAGETYPE} boot.scr ${KERNEL_DEVICETREE}"
+
+WKS_FILES ?= "sunxi-sdcard-image.wks.in"
+WKS_FILE_DEPENDS ?= "virtual/kernel u-boot"

conf/machine/lamobo-r1.conf

@@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: Lamobo R1
+#@DESCRIPTION: Machine configuration for the lamobo r1, based on allwinner A20 CPU http://bananapi.org/
+
+require conf/machine/include/sun7i.inc
+
+MACHINE_EXTRA_RRECOMMENDS = " kernel-modules kernel-devicetree"
+KERNEL_DEVICETREE = "sun7i-a20-lamobo-r1.dtb"
+UBOOT_MACHINE = "Lamobo_R1_config"
+SUNXI_FEX_FILE = "sys_config/a20/lamobo-r1.fex"

conf/machine/licheepi-zero.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: licheepi-zero
+#@DESCRIPTION: Machine configuration for the licheepi-zero, based on allwinner V3s CPU
+
+require conf/machine/include/sun8i.inc
+
+
+UBOOT_MACHINE = "LicheePi_Zero_defconfig"
+KERNEL_DEVICETREE = "sun8i-v3s-licheepi-zero.dtb"

conf/machine/marsboard-a10.conf

@@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: HAOYU Electronics MarsBoard A10
+#@DESCRIPTION: Machine configuration for the HAOYU Electronics MarsBoard A10, based on Allwinner A10 CPU
+#https://linux-sunxi.org/MarsBoard_A10
+
+require conf/machine/include/sun4i.inc
+
+KERNEL_DEVICETREE = "sun4i-a10-marsboard.dtb"
+UBOOT_MACHINE = "Marsboard_A10_config"
+SUNXI_FEX_FILE = "sys_config/a10/marsboard_a10.fex"

conf/machine/mele.conf

@@ -2,17 +2,8 @@
 #@NAME: Mele a1000/a2000
 #@DESCRIPTION: Machine configuration for the Mele a1000 and a2000, base on allwinner a10 CPU
 
-# Only has DVI connector for external screen
-GUI_MACHINE_CLASS = "bigscreen"
-
-require conf/machine/include/tune-cortexa8.inc
-require conf/machine/include/sunxi.inc
-require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/sun4i.inc
 
+KERNEL_DEVICETREE = "sun4i-a10-a1000.dtb"
 UBOOT_MACHINE = "Mele_A1000_config"
-UBOOT_ENTRYPOINT = "0x40008000"
-UBOOT_LOADADDRESS = "0x40008000"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"
+SUNXI_FEX_FILE = "sys_config/a10/mele_a1000.fex"

conf/machine/meleg.conf

@@ -2,17 +2,7 @@
 #@NAME: Mele a1000g/a2000g
 #@DESCRIPTION: Machine configuration for the Mele a1000g and a2000g, base on allwinner a10 CPU
 
-# Only has DVI connector for external screen
-GUI_MACHINE_CLASS = "bigscreen"
+require conf/machine/include/sun4i.inc
 
-require conf/machine/include/tune-cortexa8.inc
-require conf/machine/include/sunxi.inc
-require conf/machine/include/sunxi-mali.inc
-
-UBOOT_MACHINE = "Mele_A1000G_config"
-UBOOT_ENTRYPOINT = "0x40008000"
-UBOOT_LOADADDRESS = "0x40008000"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"
+UBOOT_MACHINE = "Mele_A1000G_quad_config"
+SUNXI_FEX_FILE = "sys_config/a10/mele_a1000g.fex"

conf/machine/nanopi-m1-plus.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: nanopi M1 Plus
+#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo, based on the Allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-nanopi-m1-plus.dtb"
+UBOOT_MACHINE = "nanopi_m1_plus_defconfig"
+

conf/machine/nanopi-m1.conf

@@ -0,0 +1,8 @@
+#@TYPE: Machine
+#@NAME: NanoPi M1
+#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo, based on #the Allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-nanopi-m1.dtb"
+UBOOT_MACHINE = "nanopi_m1_defconfig"

conf/machine/nanopi-neo-air.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: nanopi-neo-air
+#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo Air, based
+# on the Allwinner H3 CPU.
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo-air.dtb"
+UBOOT_MACHINE = "nanopi_neo_air_defconfig"

conf/machine/nanopi-neo-plus2.conf

@@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: nanopi-neo-plus2
+#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo Plus2, based
+# on the Allwinner H5 SoC.
+
+require conf/machine/include/sun50i.inc
+require conf/machine/include/hardware/ap6212a.inc
+
+KERNEL_DEVICETREE = "allwinner/sun50i-h5-nanopi-neo-plus2.dtb"
+UBOOT_MACHINE = "nanopi_neo_plus2_defconfig"

conf/machine/nanopi-neo.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: nanopi-neo
+#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo, based on the Allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo.dtb"
+UBOOT_MACHINE = "nanopi_neo_defconfig"
+

conf/machine/nanopi-neo2.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: nanopi-neo2
+#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo 2, based on
+# the Allwinner H5 SoC.
+
+require conf/machine/include/sun50i.inc
+
+KERNEL_DEVICETREE = "allwinner/sun50i-h5-nanopi-neo2.dtb"
+UBOOT_MACHINE = "nanopi_neo2_defconfig"

conf/machine/nanopi-r1.conf

@@ -0,0 +1,8 @@
+#@TYPE: Machine
+#@NAME: NanoPi R1
+#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi R1, based on #the Allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-nanopi-r1.dtb"
+UBOOT_MACHINE = "nanopi_r1_defconfig"

conf/machine/olinuxino-a10.conf

@@ -1,24 +0,0 @@
-#@TYPE: Machine
-#@NAME: Olimex A10-OLinuXino-LIME Board
-#@DESCRIPTION: Machine configuration for Olimex A10-OLinuXino-LIME Board, based on Allwinner A10 CPU
-#https://github.com/OLIMEX/OLINUXINO
-
-# There are also LCD possibilities
-GUI_MACHINE_CLASS = "bigscreen"
-
-require conf/machine/include/tune-cortexa8.inc
-require conf/machine/include/sunxi.inc
-require conf/machine/include/sunxi-mali.inc
-
-
-UBOOT_MACHINE = "A10-OLinuXino-Lime_config"
-UBOOT_ENTRYPOINT = "0x40008000"
-UBOOT_LOADADDRESS = "0x40008000"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-MACHINE_EXTRA_RRECOMMENDS += "\
- kernel-module-sw-ahci-platform \
-"
-
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"

conf/machine/olinuxino-a10lime.conf

@@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: Olimex A10-OLinuXino Lime (4GB) Board
+#@DESCRIPTION: Machine configuration for the Olimex A10-OLinuXino Lime Board, based on Allwinner A10 CPU
+#https://github.com/OLIMEX/OLINUXINO
+
+require conf/machine/include/sun4i.inc
+
+KERNEL_DEVICETREE = "sun4i-a10-olinuxino-lime.dtb"
+UBOOT_MACHINE = "A10-OLinuXino-Lime_config"
+SUNXI_FEX_FILE = "sys_config/a10/a10-olinuxino-lime.fex"

conf/machine/olinuxino-a10s.conf

@@ -3,17 +3,8 @@
 #@DESCRIPTION: Machine configuration for Olimex A10S-OLinuXino-MICRO Board, based on Allwinner A10s CPU
 #https://github.com/OLIMEX/OLINUXINO
 
-# There are also LCD possibilities
-GUI_MACHINE_CLASS = "bigscreen"
-
-require conf/machine/include/tune-cortexa8.inc
-require conf/machine/include/sunxi.inc
-
+require conf/machine/include/sun5i.inc
 
+KERNEL_DEVICETREE = "sun5i-a10s-olinuxino-micro.dtb"
 UBOOT_MACHINE = "A10s-OLinuXino-M_config"
-UBOOT_ENTRYPOINT = "0x40008000"
-UBOOT_LOADADDRESS = "0x40008000"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"
+SUNXI_FEX_FILE = "sys_config/a10s/a10s-olinuxino-m.fex"

conf/machine/olinuxino-a13.conf

@@ -3,17 +3,8 @@
 #@DESCRIPTION: Machine configuration for the Olime A13-OLinuXino Board, base on allwinner a13 CPU
 #https://github.com/OLIMEX/OLINUXINO
 
-# Only has DVI connector for external screen
-GUI_MACHINE_CLASS = "bigscreen"
-
-require conf/machine/include/tune-cortexa8.inc
-require conf/machine/include/sunxi.inc
-require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/sun5i.inc
 
+KERNEL_DEVICETREE = "sun5i-a13-olinuxino.dtb"
 UBOOT_MACHINE = "A13-OLinuXino_config"
-UBOOT_ENTRYPOINT = "0x40008000"
-UBOOT_LOADADDRESS = "0x40008000"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"
+SUNXI_FEX_FILE = "sys_config/a13/a13-olinuxino.fex"

conf/machine/olinuxino-a13som.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: Olimex A13-SOM
+#@DESCRIPTION: Machine configuration for the Olimex A13-SOM Evaluation Board, based on Allwinner A13 CPU
+#https://github.com/OLIMEX/SOM
+
+require conf/machine/include/sun5i.inc
+
+UBOOT_MACHINE = "OLIMEX-A13-SOM_config"
+SUNXI_FEX_FILE = "sys_config/a13/olimex_a13_som.fex"

conf/machine/olinuxino-a20.conf

@@ -3,14 +3,8 @@
 #@DESCRIPTION: Machine configuration for the Olimex A20-OLinuXino Board, based on Allwinner A20 CPU
 #https://github.com/OLIMEX/OLINUXINO
 
-require conf/machine/include/tune-cortexa7.inc
-require conf/machine/include/sunxi.inc
-require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/sun7i.inc
 
+KERNEL_DEVICETREE = "sun7i-a20-olinuxino-micro.dtb"
 UBOOT_MACHINE = "A20-OLinuXino_MICRO_config"
-UBOOT_ENTRYPOINT = "0x40008000"
-UBOOT_LOADADDRESS = "0x40008000"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"
+SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_micro.fex"

conf/machine/olinuxino-a20lime.conf

@@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: Olimex A20-OLinuXino Lime (4GB) Board
+#@DESCRIPTION: Machine configuration for the Olimex A20-OLinuXino Lime Board, based on Allwinner A20 CPU
+#https://github.com/OLIMEX/OLINUXINO
+
+require conf/machine/include/sun7i.inc
+
+KERNEL_DEVICETREE = "sun7i-a20-olinuxino-lime.dtb"
+UBOOT_MACHINE = "A20-OLinuXino-Lime_config"
+SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_lime.fex"

conf/machine/olinuxino-a20lime2-emmc.conf

@@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: Olimex A20-OLinuXino Lime2 Board with 4GB eMMC
+#@DESCRIPTION: Machine configuration for the Olimex A20-OLinuXino Lime2 Board with 4GB eMMC, based on Allwinner A20 CPU
+#https://github.com/OLIMEX/OLINUXINO
+
+require conf/machine/include/sun7i.inc
+
+KERNEL_DEVICETREE = "sun7i-a20-olinuxino-lime2-emmc.dtb"
+UBOOT_MACHINE = "A20-OLinuXino-Lime2-eMMC_config"
+SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_lime2.fex"

conf/machine/olinuxino-a20lime2.conf

@@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: Olimex A20-OLinuXino Lime2 (4GB) Board
+#@DESCRIPTION: Machine configuration for the Olimex A20-OLinuXino Lime2 Board, based on Allwinner A20 CPU
+#https://github.com/OLIMEX/OLINUXINO
+
+require conf/machine/include/sun7i.inc
+
+KERNEL_DEVICETREE = "sun7i-a20-olinuxino-lime2.dtb"
+UBOOT_MACHINE = "A20-OLinuXino-Lime2_config"
+SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_lime2.fex"

conf/machine/olinuxino-a20som.conf

@@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: Olimex A20-SOM
+#@DESCRIPTION: Machine configuration for the Olimex A20-SOM Evaluation Board, based on Allwinner A20 CPU
+#https://github.com/OLIMEX/SOM
+
+require conf/machine/include/sun7i.inc
+
+KERNEL_DEVICETREE = "sun7i-a20-olimex-som-evb.dtb"
+UBOOT_MACHINE = "A20-Olimex-SOM-EVB_config"
+SUNXI_FEX_FILE = "sys_config/a20/olimex_a20_som.fex"

conf/machine/olinuxino-a64.conf

@@ -0,0 +1,13 @@
+#@TYPE: Machine
+#@NAME: Olimex A64-OLinuXino Board
+#@DESCRIPTION: Machine configuration for the Olimex A64-OLinuXino Board, based on Allwinner A64 CPU
+#https://github.com/OLIMEX/OLINUXINO
+
+require conf/machine/include/sun50i.inc
+
+PREFFERED_VERSION_u-boot = "v2018.09%"
+
+MACHINE_EXTRA_RRECOMMENDS += " linux-firmware-rtl8723"
+
+KERNEL_DEVICETREE = "allwinner/sun50i-a64-olinuxino.dtb"
+UBOOT_MACHINE = "a64-olinuxino_defconfig"

conf/machine/orange-pi-lite.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: orange-pi-lite
+#@DESCRIPTION: Machine configuration for the orange-pi-lite, based on Allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-orangepi-lite.dtb"
+UBOOT_MACHINE = "orangepi_lite_defconfig"
+

conf/machine/orange-pi-one-plus.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: orange-pi-one-plus
+#@DESCRIPTION: Machine configuration for the Orange Pi One Plus, based on Allwinner H6 CPU
+
+
+require conf/machine/include/sun50i-h6.inc
+
+KERNEL_DEVICETREE = "allwinner/sun50i-h6-orangepi-one-plus.dtb"
+UBOOT_MACHINE = "orangepi_one_plus_defconfig"

conf/machine/orange-pi-one.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: orange-pi-one
+#@DESCRIPTION: Machine configuration for the orange-pi-one, base on allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-orangepi-one.dtb"
+UBOOT_MACHINE = "orangepi_one_defconfig"
+

conf/machine/orange-pi-pc-plus.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: orange-pi-pc-plus
+#@DESCRIPTION: Machine configuration for the orange-pi-pc-plus, base on allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc-plus.dtb"
+UBOOT_MACHINE = "orangepi_pc_plus_defconfig"
+

conf/machine/orange-pi-pc.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: orange-pi-one
+#@DESCRIPTION: Machine configuration for the orange-pi-one, base on allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc.dtb"
+UBOOT_MACHINE = "orangepi_pc_defconfig"
+

conf/machine/orange-pi-pc2.conf

@@ -0,0 +1,8 @@
+#@TYPE: Machine
+#@NAME: orangepi-pc2
+#@DESCRIPTION: Machine configuration for the orangepi-pc2, based on Allwinner A64 CPU
+
+require conf/machine/include/sun50i.inc
+
+KERNEL_DEVICETREE = "allwinner/sun50i-h5-orangepi-pc2.dtb"
+UBOOT_MACHINE = "orangepi_pc2_defconfig"

conf/machine/orange-pi-r1.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: orange-pi-r1
+#@DESCRIPTION: Machine configuration for the orange-pi-r1, base on allwinner H2+ CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h2-plus-orangepi-r1.dtb"
+UBOOT_MACHINE = "orangepi_r1_defconfig"
+

conf/machine/orange-pi-zero-plus2-h3.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: orange-pi-zero-plus2-h3
+#@DESCRIPTION: Machine configuration for the orange-pi-zero-plus2, based on Allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+require conf/machine/include/hardware/ap6212a.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-orangepi-zero-plus2.dtb"
+UBOOT_MACHINE = "orangepi_zero_plus2_h3_defconfig"

conf/machine/orange-pi-zero-plus2.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: orange-pi-zero-plus2
+#@DESCRIPTION: Machine configuration for the orange-pi-zero-plus2, base on Allwinner H5 CPU
+
+require conf/machine/include/sun50i.inc
+require conf/machine/include/hardware/ap6212a.inc
+
+KERNEL_DEVICETREE = "allwinner/sun50i-h5-orangepi-zero-plus2.dtb"
+UBOOT_MACHINE = "orangepi_zero_plus2_defconfig"

conf/machine/orange-pi-zero.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: orange-pi-zero
+#@DESCRIPTION: Machine configuration for the orange-pi-zero, based on Allwinner H2 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h2-plus-orangepi-zero.dtb"
+UBOOT_MACHINE = "orangepi_zero_defconfig"
+

conf/machine/orange-pi-zero2.conf

@@ -0,0 +1,16 @@
+#@TYPE: Machine
+#@NAME: orange-pi-zero-2
+#@DESCRIPTION: Machine configuration for the orange-pi-zero-2, based on Allwinner H616 CPU
+
+require conf/machine/include/sun50i-h616.inc
+
+KERNEL_DEVICETREE = "allwinner/sun50i-h616-orangepi-zero2.dtb"
+UBOOT_MACHINE = "orangepi_zero2_defconfig"
+
+SPL_BINARY = "u-boot-sunxi-with-spl.bin"
+
+# as for now neither graphics nor audio is supported
+MACHINE_FEATURES:remove = "alsa x11"
+MACHINE_FEATURES:append = "bluetooth wifi"
+
+MACHINE_EXTRA_RRECOMMENDS = "uwe5622-firmware"

conf/machine/pcduino.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: pcduino-lite-wifi
+#@DESCRIPTION: Machine configuration for the pcDuino-Lite-Wifi, base on allwinner a10 CPU
+
+require conf/machine/include/sun4i.inc
+
+KERNEL_DEVICETREE = "sun4i-a10-pcduino.dtb"
+UBOOT_MACHINE = "Linksprite_pcDuino_defconfig"
+SUNXI_FEX_FILE = "sys_config/a10/pcduino.fex"

conf/machine/pcduino3.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: Linksprite A20-pcduino3 Board
+#@DESCRIPTION: Machine configuration for the pcDuino 3, based on Allwinner A20 CPU
+
+require conf/machine/include/sun7i.inc
+
+KERNEL_DEVICETREE = "sun7i-a20-pcduino3.dtb"
+UBOOT_MACHINE = "Linksprite_pcDuino3_defconfig"
+SUNXI_FEX_FILE = "sys_config/a20/linksprite_pcduino3.fex"

conf/machine/pine64-plus.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: pine64-plus
+#@DESCRIPTION: Machine configuration for the pine64-plus, based on Allwinner A64 CPU
+
+
+require conf/machine/include/sun50i.inc
+
+KERNEL_DEVICETREE = "allwinner/sun50i-a64-pine64-plus.dtb"
+UBOOT_MACHINE = "pine64_plus_defconfig"

recipes-bsp/sunxi-board-fex/sunxi-board-fex.bb

@@ -7,20 +7,13 @@ DEPENDS = "sunxi-tools-native"
 PV = "1.1+git${SRCPV}"
 PR = "r0"
 
-SRC_URI = "git://github.com/linux-sunxi/sunxi-boards.git;protocol=git"
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
+
+SRC_URI = "git://github.com/linux-sunxi/sunxi-boards.git;protocol=https;branch=master"
 # Increase PV with SRCREV change
-SRCREV = "5e63e3da42254d3c23eb6436a03ed1d32fb11e98"
+SRCREV = "af5f938ea14a3614d35ad3d9ab51a5d392117444"
 
 S = "${WORKDIR}/git"
-SUNXI_FEX_FILE_mele = "sys_config/a10/mele_a1000.fex"
-SUNXI_FEX_FILE_meleg = "sys_config/a10/mele_a1000g.fex"
-SUNXI_FEX_FILE_olinuxino-a10s = "sys_config/a10s/a10s-olinuxino-m.fex"
-SUNXI_FEX_FILE_olinuxino-a10 = "sys_config/a10/a10-olinuxino-lime.fex"
-SUNXI_FEX_FILE_olinuxino-a13 = "sys_config/a13/a13-olinuxino.fex"
-SUNXI_FEX_FILE_olinuxino-a20 = "sys_config/a20/a20-olinuxino_micro.fex"
-SUNXI_FEX_FILE_cubieboard = "sys_config/a10/cubieboard.fex"
-SUNXI_FEX_FILE_cubieboard2 = "sys_config/a20/cubieboard2.fex"
-SUNXI_FEX_FILE_cubietruck= "sys_config/a20/cubietruck.fex"
 
 SUNXI_FEX_BIN_IMAGE = "fex-${MACHINE}-${PV}-${PR}.bin"
 SUNXI_FEX_BIN_IMAGE_SYMLINK = "fex-${MACHINE}.bin"
@@ -52,5 +45,3 @@ do_package_write_ipk[noexec] = "1"
 do_package_write_rpm[noexec] = "1"
 do_package_write_deb[noexec] = "1"
 do_populate_sysroot[noexec] = "1"
-
-COMPATIBLE_MACHINE = "(mele|meleg|olinuxino-a10s|olinuxino-a10|olinuxino-a13|olinuxino-a20|cubieboard|cubieboard2|cubietruck)"

recipes-bsp/trusted-firmware-a/trusted-firmware-a_%.bbappend

@@ -0,0 +1,7 @@
+COMPATIBLE_MACHINE = "(sun50i|sun50i-h616|sun50i-h6)"
+
+TFA_PLATFORM:sun50i = "sun50i_a64"
+TFA_PLATFORM:sun50i-h6 = "sun50i_h6"
+TFA_PLATFORM:sun50i-h616 = "sun50i_h616"
+
+TFA_BUILD_TARGET = "bl31"

recipes-bsp/u-boot/files/0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch

@@ -0,0 +1,21 @@
+From 6a64d90ca4d976c16a2e102dbad0848e4d29776c Mon Sep 17 00:00:00 2001
+From: Florin Sarbu <florin@resin.io>
+Date: Wed, 12 Sep 2018 14:22:49 +0200
+Subject: [PATCH] nanopi_neo_air_defconfig: Enable eMMC support
+
+Upstream-Status: Pending
+Signed-off-by: Florin Sarbu <florin@resin.io>
+
+---
+ configs/nanopi_neo_air_defconfig | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/configs/nanopi_neo_air_defconfig b/configs/nanopi_neo_air_defconfig
+index 806d95c1cc..8899cc3a15 100644
+--- a/configs/nanopi_neo_air_defconfig
++++ b/configs/nanopi_neo_air_defconfig
+@@ -9,3 +9,4 @@ CONFIG_DRAM_CLK=408
+ CONFIG_CONSOLE_MUX=y
+ CONFIG_USB_EHCI_HCD=y
+ CONFIG_USB_OHCI_HCD=y
++CONFIG_MMC_SUNXI_SLOT_EXTRA=2

recipes-bsp/u-boot/files/0002-Added-nanopi-r1-board-support.patch

@@ -0,0 +1,42 @@
+From 767a05572ef5b93c2e157749b1754cbe261ee43d Mon Sep 17 00:00:00 2001
+From: Marek Belisko <marek.belisko@open-nandra.com>
+Date: Fri, 8 Apr 2022 11:33:53 +0200
+Subject: [PATCH] Added nanopi-r1 board support
+
+Patch taken from : https://github.com/armbian/build/blob/master/patch/u-boot/u-boot-sunxi/add-nanopi-r1-and-duo2.patch
+
+Upstream-Status: Pending
+
+Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
+---
+diff --git a/configs/nanopi_r1_defconfig b/configs/nanopi_r1_defconfig
+new file mode 100644
+index 0000000..e028b41
+--- /dev/null
++++ b/configs/nanopi_r1_defconfig
+@@ -0,0 +1,22 @@
++CONFIG_ARM=y
++CONFIG_ARCH_SUNXI=y
++CONFIG_SPL=y
++CONFIG_MACH_SUN8I_H3=y
++CONFIG_DRAM_CLK=408
++CONFIG_DRAM_ZQ=3881979
++CONFIG_DRAM_ODT_EN=y
++CONFIG_MACPWR="PD6"
++# CONFIG_VIDEO_DE2 is not set
++CONFIG_NR_DRAM_BANKS=1
++# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
++CONFIG_CONSOLE_MUX=y
++CONFIG_SYS_CLK_FREQ=480000000
++# CONFIG_CMD_FLASH is not set
++# CONFIG_SPL_DOS_PARTITION is not set
++# CONFIG_SPL_EFI_PARTITION is not set
++CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-r1"
++CONFIG_SUN8I_EMAC=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_OHCI_HCD=y
++CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
++CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+-- 
+2.7.4
+

recipes-bsp/u-boot/files/0003-sunxi-H6-Enable-Ethernet-on-Orange-Pi-One-Plus.patch

@@ -0,0 +1,58 @@
+From: Anne Macedo <retpolanne@posteo.net>
+Date: Tue, 11 Jul 2023 00:39:58 +0000
+Subject: [PATCH] sunxi: H6: Enable Ethernet on Orange Pi One Plus
+
+Enable Ethernet on Orange Pi One Plus by using the correct phy for
+Realtek RTL8211E instead of the Generic One. Also use CONFIG_MACPWR to
+turn on ethernet on startup.
+
+After this patch is applied, a few issues can be seen:
+
+- there's still a PHY reset timed out error that doesn't seem to cause
+  any impacts to the overall connection
+
+- sometimes the emac driver times out after reset (yellow LED turns on
+  and never blinks)
+
+For future patches: for now, CONFIG_MACPWR is the only way to enable
+Ethernet on boot. There's already code on the dts for using the 3v3-gmac
+regulator. However, it is not probed on boot, so it only starts after a
+"regulator status" command is issued.
+
+More details about the troubleshooting on [1].
+
+Upstream-Status: Submitted
+
+[1] https://lore.kernel.org/u-boot/4wsvwgy56e2xfgtvioru2tf2ofkqprlts36qggivxogww6pn5j@4jk63zxhzhag/
+
+Signed-off-by: Anne Macedo <retpolanne@posteo.net>
+---
+ arch/arm/dts/sun50i-h6-orangepi-one-plus.dts | 2 +-
+ configs/orangepi_one_plus_defconfig          | 4 ++++
+ 2 files changed, 5 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts b/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
+index 29a081e72a..6427c58f8a 100644
+--- a/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
++++ b/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
+@@ -37,7 +37,7 @@
+ 
+ &mdio {
+ 	ext_rgmii_phy: ethernet-phy@1 {
+-		compatible = "ethernet-phy-ieee802.3-c22";
++		compatible = "ethernet-phy-id001c.c915", "ethernet-phy-ieee802.3-c22" ;
+ 		reg = <1>;
+ 	};
+ };
+diff --git a/configs/orangepi_one_plus_defconfig b/configs/orangepi_one_plus_defconfig
+index aa5f540eb1..a1835492db 100644
+--- a/configs/orangepi_one_plus_defconfig
++++ b/configs/orangepi_one_plus_defconfig
+@@ -8,3 +8,7 @@ CONFIG_SUNXI_DRAM_H6_LPDDR3=y
+ # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+ CONFIG_USB_EHCI_HCD=y
+ CONFIG_USB_OHCI_HCD=y
++CONFIG_SUN8I_EMAC=y
++CONFIG_PHY_REALTEK=y
++CONFIG_PHY_ETHERNET_ID=y
++CONFIG_MACPWR="PD6"

recipes-bsp/u-boot/files/aarch64/boot.cmd

@@ -0,0 +1,11 @@
+# Default to (primary) SD
+rootdev=mmcblk0p2
+if itest.b *0x28 == 0x02 ; then
+	# U-Boot loaded from eMMC or secondary SD so use it for rootfs too
+	echo "U-boot loaded from eMMC or secondary SD"
+	rootdev=mmcblk1p2
+fi
+setenv bootargs console=${console} console=tty1 root=/dev/${rootdev} rootwait panic=10 ${extra}
+load mmc 0:1 ${fdt_addr_r} ${fdtfile}
+load mmc 0:1 ${kernel_addr_r} Image
+booti ${kernel_addr_r} - ${fdt_addr_r}

recipes-bsp/u-boot/files/arm/boot.cmd

@@ -0,0 +1,11 @@
+# Default to (primary) SD
+rootdev=mmcblk0p2
+if itest.b *0x28 == 0x02 ; then
+	# U-Boot loaded from eMMC or secondary SD so use it for rootfs too
+	echo "U-boot loaded from eMMC or secondary SD"
+	rootdev=mmcblk1p2
+fi
+setenv bootargs console=${console} console=tty1 root=/dev/${rootdev} rootwait panic=10 ${extra}
+load mmc 0:1 ${fdt_addr_r} ${fdtfile} || load mmc 0:1 ${fdt_addr_r} boot/allwinner/${fdtfile}
+load mmc 0:1 ${kernel_addr_r} zImage || load mmc 0:1 ${kernel_addr_r} boot/zImage || load mmc 0:1 ${kernel_addr_r} uImage || load mmc 0:1 ${kernel_addr_r} boot/uImage
+bootz ${kernel_addr_r} - ${fdt_addr_r} || bootm ${kernel_addr_r} - ${fdt_addr_r}

recipes-bsp/u-boot/files/bananapi-m64/boot.cmd

@@ -0,0 +1,11 @@
+# Default to (primary) SD
+rootdev=mmcblk0p2
+if itest.b *0x28 == 0x02 ; then
+	# U-Boot loaded from eMMC or secondary SD so use it for rootfs too
+	echo "U-boot loaded from eMMC or secondary SD"
+	rootdev=mmcblk2p2
+fi
+setenv bootargs console=${console} console=tty1 root=/dev/${rootdev} rootwait panic=10 ${extra}
+load mmc 0:1 ${fdt_addr_r} ${fdtfile}
+load mmc 0:1 ${kernel_addr_r} Image
+booti ${kernel_addr_r} - ${fdt_addr_r}

recipes-bsp/u-boot/u-boot-sunxi.bb

@@ -0,0 +1,42 @@
+DESCRIPTION = "U-Boot port for sunxi"
+
+require recipes-bsp/u-boot/u-boot.inc
+
+LICENSE = "GPL-2.0-only"
+LIC_FILES_CHKSUM = "file://Licenses/gpl-2.0.txt;md5=b234ee4d69f5fce4486a80fdaf4a4263"
+
+# No patches for other machines yet
+
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
+
+DEFAULT_PREFERENCE_sun4i="1"
+DEFAULT_PREFERENCE_sun5i="1"
+DEFAULT_PREFERENCE_sun7i="1"
+
+# Sunxi U-Boot uses different names for some boards
+UBOOT_MACHINE_olinuxino-a20 = "A20-OLinuXino-Micro_config"
+UBOOT_MACHINE_olinuxino-a10s = "A10s-OLinuXino-Micro_config"
+UBOOT_MACHINE_meleg = "Mele_A1000G_config"
+
+SRC_URI = " \
+	git://github.com/linux-sunxi/u-boot-sunxi.git;protocol=https;branch=sunxi \
+	file://0001-gcc5-fixes.patch \
+	file://0002-gcc6-fixes.patch \
+	file://0003-No-gcc-version-specific-includes.patch \
+	"
+
+PE = "1"
+
+PV = "v2014.04+git${SRCPV}"
+# Corresponds 2014.04 in Makefile
+SRCREV = "ea1ac32bf76eb60baef474c2516fc431b381d952"
+
+S = "${WORKDIR}/git"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+SPL_BINARY="u-boot-sunxi-with-spl.bin"
+
+do_configure () {
+    oe_runmake -C ${S} O=${B} ${UBOOT_MACHINE}
+}

recipes-bsp/u-boot/u-boot-sunxi/0001-gcc5-fixes.patch

@@ -0,0 +1,197 @@
+From a5e50d6fd7321d0bc60fda2db938c170d09f9dee Mon Sep 17 00:00:00 2001
+From: Trevor Woerner <twoerner@gmail.com>
+Date: Thu, 24 Sep 2015 22:36:02 -0400
+Subject: [PATCH] gcc5 fixes
+
+gcc5 is pickier about inline functions defined in headers.
+
+Signed-off-by: Trevor Woerner <twoerner@gmail.com>
+---
+ arch/arm/include/asm/io.h     | 12 ++++----
+ common/board_f.c              | 18 ++++++------
+ common/main.c                 |  2 +-
+ include/linux/compiler-gcc5.h | 65 +++++++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 81 insertions(+), 16 deletions(-)
+ create mode 100644 include/linux/compiler-gcc5.h
+
+diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
+index 6a1f05a..2f6925b 100644
+--- a/arch/arm/include/asm/io.h
++++ b/arch/arm/include/asm/io.h
+@@ -75,7 +75,7 @@ static inline phys_addr_t virt_to_phys(void * vaddr)
+ #define __arch_putw(v,a)		(*(volatile unsigned short *)(a) = (v))
+ #define __arch_putl(v,a)		(*(volatile unsigned int *)(a) = (v))
+ 
+-extern inline void __raw_writesb(unsigned long addr, const void *data,
++static inline void __raw_writesb(unsigned long addr, const void *data,
+ 				 int bytelen)
+ {
+ 	uint8_t *buf = (uint8_t *)data;
+@@ -83,7 +83,7 @@ extern inline void __raw_writesb(unsigned long addr, const void *data,
+ 		__arch_putb(*buf++, addr);
+ }
+ 
+-extern inline void __raw_writesw(unsigned long addr, const void *data,
++static inline void __raw_writesw(unsigned long addr, const void *data,
+ 				 int wordlen)
+ {
+ 	uint16_t *buf = (uint16_t *)data;
+@@ -91,7 +91,7 @@ extern inline void __raw_writesw(unsigned long addr, const void *data,
+ 		__arch_putw(*buf++, addr);
+ }
+ 
+-extern inline void __raw_writesl(unsigned long addr, const void *data,
++static inline void __raw_writesl(unsigned long addr, const void *data,
+ 				 int longlen)
+ {
+ 	uint32_t *buf = (uint32_t *)data;
+@@ -99,21 +99,21 @@ extern inline void __raw_writesl(unsigned long addr, const void *data,
+ 		__arch_putl(*buf++, addr);
+ }
+ 
+-extern inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
++static inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
+ {
+ 	uint8_t *buf = (uint8_t *)data;
+ 	while(bytelen--)
+ 		*buf++ = __arch_getb(addr);
+ }
+ 
+-extern inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
++static inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
+ {
+ 	uint16_t *buf = (uint16_t *)data;
+ 	while(wordlen--)
+ 		*buf++ = __arch_getw(addr);
+ }
+ 
+-extern inline void __raw_readsl(unsigned long addr, void *data, int longlen)
++static inline void __raw_readsl(unsigned long addr, void *data, int longlen)
+ {
+ 	uint32_t *buf = (uint32_t *)data;
+ 	while(longlen--)
+diff --git a/common/board_f.c b/common/board_f.c
+index f285bad..72b421c 100644
+--- a/common/board_f.c
++++ b/common/board_f.c
+@@ -78,24 +78,24 @@ DECLARE_GLOBAL_DATA_PTR;
+  ************************************************************************
+  * May be supplied by boards if desired
+  */
+-inline void __coloured_LED_init(void) {}
++void __coloured_LED_init(void) {}
+ void coloured_LED_init(void)
+ 	__attribute__((weak, alias("__coloured_LED_init")));
+-inline void __red_led_on(void) {}
++void __red_led_on(void) {}
+ void red_led_on(void) __attribute__((weak, alias("__red_led_on")));
+-inline void __red_led_off(void) {}
++void __red_led_off(void) {}
+ void red_led_off(void) __attribute__((weak, alias("__red_led_off")));
+-inline void __green_led_on(void) {}
++void __green_led_on(void) {}
+ void green_led_on(void) __attribute__((weak, alias("__green_led_on")));
+-inline void __green_led_off(void) {}
++void __green_led_off(void) {}
+ void green_led_off(void) __attribute__((weak, alias("__green_led_off")));
+-inline void __yellow_led_on(void) {}
++void __yellow_led_on(void) {}
+ void yellow_led_on(void) __attribute__((weak, alias("__yellow_led_on")));
+-inline void __yellow_led_off(void) {}
++void __yellow_led_off(void) {}
+ void yellow_led_off(void) __attribute__((weak, alias("__yellow_led_off")));
+-inline void __blue_led_on(void) {}
++void __blue_led_on(void) {}
+ void blue_led_on(void) __attribute__((weak, alias("__blue_led_on")));
+-inline void __blue_led_off(void) {}
++void __blue_led_off(void) {}
+ void blue_led_off(void) __attribute__((weak, alias("__blue_led_off")));
+ 
+ /*
+diff --git a/common/main.c b/common/main.c
+index 8b6f274..3312b90 100644
+--- a/common/main.c
++++ b/common/main.c
+@@ -27,7 +27,7 @@ DECLARE_GLOBAL_DATA_PTR;
+ /*
+  * Board-specific Platform code can reimplement show_boot_progress () if needed
+  */
+-void inline __show_boot_progress (int val) {}
++void __show_boot_progress (int val) {}
+ void show_boot_progress (int val) __attribute__((weak, alias("__show_boot_progress")));
+ 
+ #define MAX_DELAY_STOP_STR 32
+diff --git a/include/linux/compiler-gcc5.h b/include/linux/compiler-gcc5.h
+new file mode 100644
+index 0000000..c8c5659
+--- /dev/null
++++ b/include/linux/compiler-gcc5.h
+@@ -0,0 +1,65 @@
++#ifndef __LINUX_COMPILER_H
++#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
++#endif
++
++#define __used				__attribute__((__used__))
++#define __must_check			__attribute__((warn_unused_result))
++#define __compiler_offsetof(a, b)	__builtin_offsetof(a, b)
++
++/* Mark functions as cold. gcc will assume any path leading to a call
++   to them will be unlikely.  This means a lot of manual unlikely()s
++   are unnecessary now for any paths leading to the usual suspects
++   like BUG(), printk(), panic() etc. [but let's keep them for now for
++   older compilers]
++
++   Early snapshots of gcc 4.3 don't support this and we can't detect this
++   in the preprocessor, but we can live with this because they're unreleased.
++   Maketime probing would be overkill here.
++
++   gcc also has a __attribute__((__hot__)) to move hot functions into
++   a special section, but I don't see any sense in this right now in
++   the kernel context */
++#define __cold			__attribute__((__cold__))
++
++#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
++
++#ifndef __CHECKER__
++# define __compiletime_warning(message) __attribute__((warning(message)))
++# define __compiletime_error(message) __attribute__((error(message)))
++#endif /* __CHECKER__ */
++
++/*
++ * Mark a position in code as unreachable.  This can be used to
++ * suppress control flow warnings after asm blocks that transfer
++ * control elsewhere.
++ *
++ * Early snapshots of gcc 4.5 don't support this and we can't detect
++ * this in the preprocessor, but we can live with this because they're
++ * unreleased.  Really, we need to have autoconf for the kernel.
++ */
++#define unreachable() __builtin_unreachable()
++
++/* Mark a function definition as prohibited from being cloned. */
++#define __noclone	__attribute__((__noclone__))
++
++/*
++ * Tell the optimizer that something else uses this function or variable.
++ */
++#define __visible __attribute__((externally_visible))
++
++/*
++ * GCC 'asm goto' miscompiles certain code sequences:
++ *
++ *   http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
++ *
++ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
++ *
++ * (asm goto is automatically volatile - the naming reflects this.)
++ */
++#define asm_volatile_goto(x...)	do { asm goto(x); asm (""); } while (0)
++
++#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
++#define __HAVE_BUILTIN_BSWAP32__
++#define __HAVE_BUILTIN_BSWAP64__
++#define __HAVE_BUILTIN_BSWAP16__
++#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
+-- 
+2.6.0.rc3
+

recipes-bsp/u-boot/u-boot-sunxi/0002-gcc6-fixes.patch

@@ -0,0 +1,69 @@
+diff -urN git-ORIG/include/linux/compiler-gcc6.h git/include/linux/compiler-gcc6.h
+--- git-ORIG/include/linux/compiler-gcc6.h	1969-12-31 19:00:00.000000000 -0500
++++ git/include/linux/compiler-gcc6.h	2017-04-09 19:50:16.920945874 -0400
+@@ -0,0 +1,65 @@
++#ifndef __LINUX_COMPILER_H
++#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
++#endif
++
++#define __used				__attribute__((__used__))
++#define __must_check			__attribute__((warn_unused_result))
++#define __compiler_offsetof(a, b)	__builtin_offsetof(a, b)
++
++/* Mark functions as cold. gcc will assume any path leading to a call
++   to them will be unlikely.  This means a lot of manual unlikely()s
++   are unnecessary now for any paths leading to the usual suspects
++   like BUG(), printk(), panic() etc. [but let's keep them for now for
++   older compilers]
++
++   Early snapshots of gcc 4.3 don't support this and we can't detect this
++   in the preprocessor, but we can live with this because they're unreleased.
++   Maketime probing would be overkill here.
++
++   gcc also has a __attribute__((__hot__)) to move hot functions into
++   a special section, but I don't see any sense in this right now in
++   the kernel context */
++#define __cold			__attribute__((__cold__))
++
++#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
++
++#ifndef __CHECKER__
++# define __compiletime_warning(message) __attribute__((warning(message)))
++# define __compiletime_error(message) __attribute__((error(message)))
++#endif /* __CHECKER__ */
++
++/*
++ * Mark a position in code as unreachable.  This can be used to
++ * suppress control flow warnings after asm blocks that transfer
++ * control elsewhere.
++ *
++ * Early snapshots of gcc 4.5 don't support this and we can't detect
++ * this in the preprocessor, but we can live with this because they're
++ * unreleased.  Really, we need to have autoconf for the kernel.
++ */
++#define unreachable() __builtin_unreachable()
++
++/* Mark a function definition as prohibited from being cloned. */
++#define __noclone	__attribute__((__noclone__))
++
++/*
++ * Tell the optimizer that something else uses this function or variable.
++ */
++#define __visible __attribute__((externally_visible))
++
++/*
++ * GCC 'asm goto' miscompiles certain code sequences:
++ *
++ *   http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
++ *
++ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
++ *
++ * (asm goto is automatically volatile - the naming reflects this.)
++ */
++#define asm_volatile_goto(x...)	do { asm goto(x); asm (""); } while (0)
++
++#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
++#define __HAVE_BUILTIN_BSWAP32__
++#define __HAVE_BUILTIN_BSWAP64__
++#define __HAVE_BUILTIN_BSWAP16__
++#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */

recipes-bsp/u-boot/u-boot-sunxi/0003-No-gcc-version-specific-includes.patch

@@ -0,0 +1,24 @@
+From bc4aa5814cbedbfaa1c79dfe7ea2571fee7f2d51 Mon Sep 17 00:00:00 2001
+From: Andrey Lebedev <andrey@lebedev.lt>
+Date: Wed, 22 Jan 2020 20:00:11 +0200
+Subject: [PATCH] No gcc version-specific includes
+
+In order to support gcc-5 and above. Fixes compilation errors like
+
+linux/compiler-gcc9.h: No such file or directory
+---
+ include/linux/compiler-gcc.h | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
+index 9896e547b9..5f0bd65f3a 100644
+--- a/include/linux/compiler-gcc.h
++++ b/include/linux/compiler-gcc.h
+@@ -90,4 +90,3 @@
+ #define __gcc_header(x) #x
+ #define _gcc_header(x) __gcc_header(linux/compiler-gcc##x.h)
+ #define gcc_header(x) _gcc_header(x)
+-#include gcc_header(__GNUC__)
+-- 
+2.20.1
+

recipes-bsp/u-boot/u-boot.inc

@@ -1,97 +0,0 @@
-DESCRIPTION = "U-Boot - the Universal Boot Loader"
-HOMEPAGE = "http://www.denx.de/wiki/U-Boot/WebHome"
-SECTION = "bootloaders"
-PROVIDES = "virtual/bootloader"
-
-inherit deploy
-
-EXTRA_OEMAKE = 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}"'
-
-python () {
-	if not d.getVar("UBOOT_MACHINE", True):
-		PN = d.getVar("PN", True)
-		FILE = os.path.basename(d.getVar("FILE", True))
-		bb.debug(1, "To build %s, see %s for instructions on \
-			     setting up your machine config" % (PN, FILE))
-		raise bb.parse.SkipPackage("because UBOOT_MACHINE is not set")
-}
-
-# Allow setting an additional version string that will be picked up by the
-# u-boot build system and appended to the u-boot version.  If the .scmversion
-# file already exists it will not be overwritten.
-UBOOT_LOCALVERSION ?= ""
-
-# Some versions of u-boot use .bin and others use .img.  By default use .bin
-# but enable individual recipes to change this value.
-UBOOT_SUFFIX ?= "bin"
-UBOOT_IMAGE ?= "u-boot-${MACHINE}-${PV}-${PR}.${UBOOT_SUFFIX}"
-UBOOT_BINARY ?= "u-boot.${UBOOT_SUFFIX}"
-UBOOT_SYMLINK ?= "u-boot-${MACHINE}.${UBOOT_SUFFIX}"
-UBOOT_MAKE_TARGET ?= "all"
-
-# Some versions of u-boot build an SPL (Second Program Loader) image that
-# should be packaged along with the u-boot binary as well as placed in the
-# deploy directory.  For those versions they can set the following variables
-# to allow packaging the SPL.
-SPL_BINARY ?= ""
-SPL_IMAGE ?= "${SPL_BINARY}-${MACHINE}-${PV}-${PR}"
-SPL_SYMLINK ?= "${SPL_BINARY}-${MACHINE}"
-
-do_compile () {
-	if [ "${@base_contains('DISTRO_FEATURES', 'ld-is-gold', 'ld-is-gold', '', d)}" = "ld-is-gold" ] ; then
-		sed -i 's/$(CROSS_COMPILE)ld$/$(CROSS_COMPILE)ld.bfd/g' config.mk
-	fi
-
-	unset LDFLAGS
-	unset CFLAGS
-	unset CPPFLAGS
-
-	if [ ! -e ${B}/.scmversion -a ! -e ${S}/.scmversion ]
-	then
-		echo ${UBOOT_LOCALVERSION} > ${B}/.scmversion
-		echo ${UBOOT_LOCALVERSION} > ${S}/.scmversion
-	fi
-
-	oe_runmake ${UBOOT_MACHINE}
-	oe_runmake ${UBOOT_MAKE_TARGET}
-}
-
-do_install () {
-    install -d ${D}/boot
-    install ${S}/${UBOOT_BINARY} ${D}/boot/${UBOOT_IMAGE}
-    ln -sf ${UBOOT_IMAGE} ${D}/boot/${UBOOT_BINARY}
-
-    if [ -e ${WORKDIR}/fw_env.config ] ; then
-        install -d ${D}${sysconfdir}
-        install -m 644 ${WORKDIR}/fw_env.config ${D}${sysconfdir}/fw_env.config
-    fi
-
-    if [ "x${SPL_BINARY}" != "x" ]
-    then
-        install ${S}/${SPL_BINARY} ${D}/boot/${SPL_IMAGE}
-        ln -sf ${SPL_IMAGE} ${D}/boot/${SPL_BINARY}
-    fi
-}
-
-FILES_${PN} = "/boot ${sysconfdir}"
-FILESPATH =. "${FILE_DIRNAME}/u-boot-git/${MACHINE}:"
-
-do_deploy () {
-    install -d ${DEPLOYDIR}
-    install ${S}/${UBOOT_BINARY} ${DEPLOYDIR}/${UBOOT_IMAGE}
-
-    cd ${DEPLOYDIR}
-    rm -f ${UBOOT_BINARY} ${UBOOT_SYMLINK}
-    ln -sf ${UBOOT_IMAGE} ${UBOOT_SYMLINK}
-    ln -sf ${UBOOT_IMAGE} ${UBOOT_BINARY}
-
-    if [ "x${SPL_BINARY}" != "x" ]
-    then
-        install ${S}/${SPL_BINARY} ${DEPLOYDIR}/${SPL_IMAGE}
-        rm -f ${DEPLOYDIR}/${SPL_BINARY} ${DEPLOYDIR}/${SPL_SYMLINK}
-        ln -sf ${SPL_IMAGE} ${DEPLOYDIR}/${SPL_BINARY}
-        ln -sf ${SPL_IMAGE} ${DEPLOYDIR}/${SPL_SYMLINK}
-    fi
-}
-
-addtask deploy before do_build after do_compile

recipes-bsp/u-boot/u-boot_%.bbappend

@@ -0,0 +1,31 @@
+FILESEXTRAPATHS:prepend:sunxi := "${THISDIR}/files:"
+
+DEPENDS:append:sunxi = " bc-native dtc-native swig-native python3-native flex-native bison-native "
+DEPENDS:append:sun50i = " trusted-firmware-a"
+
+COMPATIBLE_MACHINE:sunxi = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
+
+DEFAULT_PREFERENCE:sun4i = "1"
+DEFAULT_PREFERENCE:sun5i = "1"
+DEFAULT_PREFERENCE:sun7i = "1"
+DEFAULT_PREFERENCE:sun8i = "1"
+DEFAULT_PREFERENCE:sun50i = "1"
+
+SRC_URI:append:sunxi = " \
+        file://0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch \
+	file://0002-Added-nanopi-r1-board-support.patch \
+	file://0003-sunxi-H6-Enable-Ethernet-on-Orange-Pi-One-Plus.patch \
+        file://boot.cmd \
+"
+
+UBOOT_ENV_SUFFIX:sunxi = "scr"
+UBOOT_ENV:sunxi = "boot"
+
+EXTRA_OEMAKE:append:sunxi = ' HOSTLDSHARED="${BUILD_CC} -shared ${BUILD_LDFLAGS} ${BUILD_CFLAGS}" '
+EXTRA_OEMAKE:append:sun50i = " BL31=${DEPLOY_DIR_IMAGE}/bl31.bin SCP=/dev/null"
+
+do_compile:sun50i[depends] += "trusted-firmware-a:do_deploy"
+
+do_compile:append:sunxi() {
+    ${B}/tools/mkimage -C none -A arm -T script -d ${WORKDIR}/boot.cmd ${WORKDIR}/${UBOOT_ENV_BINARY}
+}

recipes-bsp/u-boot/u-boot_git.bb

@@ -1,31 +0,0 @@
-require u-boot.inc
-
-LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://Licenses/gpl-2.0.txt;md5=b234ee4d69f5fce4486a80fdaf4a4263"
-
-# No patches for other machines yet
-COMPATIBLE_MACHINE = "(mele|meleg|olinuxino-a13|olinuxino-a10s|olinuxino-a10|olinuxino-a20|cubieboard|cubieboard2|cubietruck)"
-
-DEFAULT_PREFERENCE_mele= "1"
-DEFAULT_PREFERENCE_meleg= "1"
-DEFAULT_PREFERENCE_olinuxino-a13= "1"
-DEFAULT_PREFERENCE_olinuxino-a10s= "1"
-DEFAULT_PREFERENCE_olinuxino-a10= "1"
-DEFAULT_PREFERENCE_olinuxino-a20= "1"
-DEFAULT_PREFERENCE_cubieboard="1"
-DEFAULT_PREFERENCE_cubieboard2="1"
-DEFAULT_PREFERENCE_cubietruck="1"
-
-SRC_URI = "git://github.com/linux-sunxi/u-boot-sunxi.git;protocol=git;branch=sunxi"
-
-PE = "1"
-PV = "v2013.10+v2014.01-rc1"
-SRCREV = "d854c4de2f57107e35893c591f856f8f6d0ccc5d"
-
-
-S = "${WORKDIR}/git"
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-SPL_BINARY="u-boot-sunxi-with-spl.bin"
-

recipes-devtools/python/files/olinuxino-a10/mapping.h

@@ -0,0 +1,221 @@
+/*
+ *
+ * This file is part of pyA10Lime.
+ * mapping.h is python GPIO extension.
+ *
+ * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
+ *
+ * pyA10Lime is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MAPPING_H
+#define __MAPPING_H
+
+#include "gpio_lib.h"
+
+/**
+Structure that describe all gpio
+*/
+typedef struct _pin {
+    char name[10];          // The processor pin
+    int offset;             // Memory offset for the pin
+    int pin_number;         // Number on the connector
+}pin_t;
+
+typedef struct _gpio {
+    char connector_name[10];
+    pin_t pins[41];
+}gpio_t;
+
+
+gpio_t gpio[] = {
+    {"lcd",
+        {
+            {   "PD16", SUNXI_GPD(16),  5   },
+            {   "PD17", SUNXI_GPD(17),  6   },
+            {   "PD18", SUNXI_GPD(18),  7   },
+            {   "PD19", SUNXI_GPD(19),  8   },
+            {   "PD20", SUNXI_GPD(20),  9   },
+            {   "PD21", SUNXI_GPD(21),  10  },
+            {   "PD22", SUNXI_GPD(22),  11  },
+            {   "PD23", SUNXI_GPD(23),  12  },
+            {   "PD8",  SUNXI_GPD(8),   13  },
+            {   "PD9",  SUNXI_GPD(9),   14  },
+            {   "PD10", SUNXI_GPD(10),  15  },
+            {   "PD11", SUNXI_GPD(11),  16  },
+            {   "PD12", SUNXI_GPD(12),  17  },
+            {   "PD13", SUNXI_GPD(13),  18  },
+            {   "PD14", SUNXI_GPD(14),  19  },
+            {   "PD15", SUNXI_GPD(15),  20  },
+            {   "PD0",  SUNXI_GPD(0),   21  },
+            {   "PD1",  SUNXI_GPD(1),   22  },
+            {   "PD2",  SUNXI_GPD(2),   23  },
+            {   "PD3",  SUNXI_GPD(3),   24  },
+            {   "PD4",  SUNXI_GPD(4),   25  },
+            {   "PD5",  SUNXI_GPD(5),   26  },
+            {   "PD6",  SUNXI_GPD(6),   27  },
+            {   "PD7",  SUNXI_GPD(7),   28  },
+            {   "PD26", SUNXI_GPD(26),  29  },
+            {   "PD27", SUNXI_GPD(27),  30  },
+            {   "PD24", SUNXI_GPD(24),  31  },
+            {   "PD25", SUNXI_GPD(25),  32  },
+            {   "PH8",  SUNXI_GPH(8),   35  },
+            {   "PB2",  SUNXI_GPB(2),   36  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio1",
+        {
+            {   "PG0",  SUNXI_GPG(0),   5   },
+            {   "PG1",  SUNXI_GPG(1),   7   },
+            {   "PG2",  SUNXI_GPG(2),   9   },
+            {   "PG3",  SUNXI_GPG(3),   11  },
+            {   "PG4",  SUNXI_GPG(4),   13  },
+            {   "PG5",  SUNXI_GPG(5),   15  },
+            {   "PG6",  SUNXI_GPG(6),   17  },
+            {   "PG7",  SUNXI_GPG(7),   19  },
+            {   "PG8",  SUNXI_GPG(8),   21  },
+            {   "PG9",  SUNXI_GPG(9),   23  },
+            {   "PG10", SUNXI_GPG(10),  25  },
+            {   "PG11", SUNXI_GPG(11),  27  },
+            {   "PC3",  SUNXI_GPC(3),   29  },
+            {   "PC18", SUNXI_GPC(18),  31  },
+            {   "PC19", SUNXI_GPC(19),  33  },
+            {   "PC20", SUNXI_GPC(20),  35  },
+            {   "PC21", SUNXI_GPC(21),  37  },
+            {   "PC22", SUNXI_GPC(22),  39  },
+            {   "PC23", SUNXI_GPC(23),  40  },
+            {   "PC24", SUNXI_GPC(24),  38  },
+            {   "PB18", SUNXI_GPB(18),  36  },
+            {   "PB19", SUNXI_GPB(19),  34  },
+            {   "PB20", SUNXI_GPB(20),  32  },
+            {   "PB21", SUNXI_GPB(21),  30  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio2",
+        {
+            {   "PI0",  SUNXI_GPI(0),   9   },
+            {   "PI1",  SUNXI_GPI(1),   11  },
+            {   "PI2",  SUNXI_GPI(2),   13  },
+            {   "PI3",  SUNXI_GPI(3),   15  },
+            {   "PI4",  SUNXI_GPI(4),   17  },
+            {   "PI5",  SUNXI_GPI(5),   19  },
+            {   "PI6",  SUNXI_GPI(6),   21  },
+            {   "PI7",  SUNXI_GPI(7),   23  },
+            {   "PI8",  SUNXI_GPI(8),   25  },
+            {   "PI9",  SUNXI_GPI(9),   27  },
+            {   "PI10", SUNXI_GPI(10),  29  },
+            {   "PI11", SUNXI_GPI(11),  31  },
+            {   "PI12", SUNXI_GPI(12),  33  },
+            {   "PI13", SUNXI_GPI(13),  35  },
+            {   "PI14", SUNXI_GPI(14),  37  },
+            {   "PI15", SUNXI_GPI(15),  39  },
+            {   "PI16", SUNXI_GPI(16),  40  },
+            {   "PI17", SUNXI_GPI(17),  38  },
+            {   "PI18", SUNXI_GPI(18),  36  },
+            {   "PI19", SUNXI_GPI(19),  34  },
+            {   "PI20", SUNXI_GPI(20),  32  },
+            {   "PI21", SUNXI_GPI(21),  30  },
+            {   "PE0",  SUNXI_GPE(0),   6   },
+            {   "PE1",  SUNXI_GPE(1),   8   },
+            {   "PE2",  SUNXI_GPE(2),   10  },
+            {   "PE3",  SUNXI_GPE(3),   12  },
+            {   "PE4",  SUNXI_GPE(4),   14  },
+            {   "PE5",  SUNXI_GPE(5),   16  },
+            {   "PE6",  SUNXI_GPE(6),   18  },
+            {   "PE7",  SUNXI_GPE(7),   20  },
+            {   "PE8",  SUNXI_GPE(8),   22  },
+            {   "PE9",  SUNXI_GPE(9),   24  },
+            {   "PE10", SUNXI_GPE(10),  26  },
+            {   "PE11", SUNXI_GPE(11),  28  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio3",
+        {
+            {   "PH0",  SUNXI_GPH(0),   7   },
+            {   "PH7",  SUNXI_GPH(7),   9   },
+            {   "PH9",  SUNXI_GPH(9),   11  },
+            {   "PH10", SUNXI_GPH(10),  13  },
+            {   "PH11", SUNXI_GPH(11),  15  },
+            {   "PH12", SUNXI_GPH(12),  17  },
+            {   "PH13", SUNXI_GPH(13),  19  },
+            {   "PH14", SUNXI_GPH(14),  21  },
+            {   "PH15", SUNXI_GPH(15),  23  },
+            {   "PH16", SUNXI_GPH(16),  25  },
+            {   "PH17", SUNXI_GPH(17),  27  },
+            {   "PH18", SUNXI_GPH(18),  29  },
+            {   "PH19", SUNXI_GPH(19),  31  },
+            {   "PH20", SUNXI_GPH(20),  33  },
+            {   "PH21", SUNXI_GPH(21),  35  },
+            {   "PH22", SUNXI_GPH(22),  37  },
+            {   "PH23", SUNXI_GPH(23),  39  },
+            {   "PH24", SUNXI_GPH(24),  34  },
+            {   "PH25", SUNXI_GPH(25),  36  },
+            {   "PH26", SUNXI_GPH(26),  38  },
+            {   "PH27", SUNXI_GPH(27),  40  },
+            {   "PB3",  SUNXI_GPB(3),   6   },
+            {   "PB4",  SUNXI_GPB(4),   8   },
+            {   "PB5",  SUNXI_GPB(5),   10  },
+            {   "PB6",  SUNXI_GPB(6),   12  },
+            {   "PB7",  SUNXI_GPB(7),   14  },
+            {   "PB8",  SUNXI_GPB(8),   16  },
+            {   "PB10", SUNXI_GPB(10),  18  },
+            {   "PB11", SUNXI_GPB(11),  20  },
+            {   "PB12", SUNXI_GPB(12),  22  },
+            {   "PB13", SUNXI_GPB(13),  24  },
+            {   "PB14", SUNXI_GPB(14),  26  },
+            {   "PB15", SUNXI_GPB(15),  28  },
+            {   "PB16", SUNXI_GPB(16),  30  },
+            {   "PB17", SUNXI_GPB(17),  32  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio4",
+        {
+            {   "PC7",  SUNXI_GPC(7),   16  },
+            {   "PC16", SUNXI_GPC(16),  18  },
+            {   "PC17", SUNXI_GPC(17),  20  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"led",
+        {
+            {   "PH2",  SUNXI_GPH(2),   1},
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+};
+
+#endif

recipes-devtools/python/files/olinuxino-a10lime/mapping.h

@@ -0,0 +1,221 @@
+/*
+ *
+ * This file is part of pyA10Lime.
+ * mapping.h is python GPIO extension.
+ *
+ * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
+ *
+ * pyA10Lime is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MAPPING_H
+#define __MAPPING_H
+
+#include "gpio_lib.h"
+
+/**
+Structure that describe all gpio
+*/
+typedef struct _pin {
+    char name[10];          // The processor pin
+    int offset;             // Memory offset for the pin
+    int pin_number;         // Number on the connector
+}pin_t;
+
+typedef struct _gpio {
+    char connector_name[10];
+    pin_t pins[41];
+}gpio_t;
+
+
+gpio_t gpio[] = {
+    {"lcd",
+        {
+            {   "PD16", SUNXI_GPD(16),  5   },
+            {   "PD17", SUNXI_GPD(17),  6   },
+            {   "PD18", SUNXI_GPD(18),  7   },
+            {   "PD19", SUNXI_GPD(19),  8   },
+            {   "PD20", SUNXI_GPD(20),  9   },
+            {   "PD21", SUNXI_GPD(21),  10  },
+            {   "PD22", SUNXI_GPD(22),  11  },
+            {   "PD23", SUNXI_GPD(23),  12  },
+            {   "PD8",  SUNXI_GPD(8),   13  },
+            {   "PD9",  SUNXI_GPD(9),   14  },
+            {   "PD10", SUNXI_GPD(10),  15  },
+            {   "PD11", SUNXI_GPD(11),  16  },
+            {   "PD12", SUNXI_GPD(12),  17  },
+            {   "PD13", SUNXI_GPD(13),  18  },
+            {   "PD14", SUNXI_GPD(14),  19  },
+            {   "PD15", SUNXI_GPD(15),  20  },
+            {   "PD0",  SUNXI_GPD(0),   21  },
+            {   "PD1",  SUNXI_GPD(1),   22  },
+            {   "PD2",  SUNXI_GPD(2),   23  },
+            {   "PD3",  SUNXI_GPD(3),   24  },
+            {   "PD4",  SUNXI_GPD(4),   25  },
+            {   "PD5",  SUNXI_GPD(5),   26  },
+            {   "PD6",  SUNXI_GPD(6),   27  },
+            {   "PD7",  SUNXI_GPD(7),   28  },
+            {   "PD26", SUNXI_GPD(26),  29  },
+            {   "PD27", SUNXI_GPD(27),  30  },
+            {   "PD24", SUNXI_GPD(24),  31  },
+            {   "PD25", SUNXI_GPD(25),  32  },
+            {   "PH8",  SUNXI_GPH(8),   35  },
+            {   "PB2",  SUNXI_GPB(2),   36  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio1",
+        {
+            {   "PG0",  SUNXI_GPG(0),   5   },
+            {   "PG1",  SUNXI_GPG(1),   7   },
+            {   "PG2",  SUNXI_GPG(2),   9   },
+            {   "PG3",  SUNXI_GPG(3),   11  },
+            {   "PG4",  SUNXI_GPG(4),   13  },
+            {   "PG5",  SUNXI_GPG(5),   15  },
+            {   "PG6",  SUNXI_GPG(6),   17  },
+            {   "PG7",  SUNXI_GPG(7),   19  },
+            {   "PG8",  SUNXI_GPG(8),   21  },
+            {   "PG9",  SUNXI_GPG(9),   23  },
+            {   "PG10", SUNXI_GPG(10),  25  },
+            {   "PG11", SUNXI_GPG(11),  27  },
+            {   "PC3",  SUNXI_GPC(3),   29  },
+            {   "PC18", SUNXI_GPC(18),  31  },
+            {   "PC19", SUNXI_GPC(19),  33  },
+            {   "PC20", SUNXI_GPC(20),  35  },
+            {   "PC21", SUNXI_GPC(21),  37  },
+            {   "PC22", SUNXI_GPC(22),  39  },
+            {   "PC23", SUNXI_GPC(23),  40  },
+            {   "PC24", SUNXI_GPC(24),  38  },
+            {   "PB18", SUNXI_GPB(18),  36  },
+            {   "PB19", SUNXI_GPB(19),  34  },
+            {   "PB20", SUNXI_GPB(20),  32  },
+            {   "PB21", SUNXI_GPB(21),  30  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio2",
+        {
+            {   "PI0",  SUNXI_GPI(0),   9   },
+            {   "PI1",  SUNXI_GPI(1),   11  },
+            {   "PI2",  SUNXI_GPI(2),   13  },
+            {   "PI3",  SUNXI_GPI(3),   15  },
+            {   "PI4",  SUNXI_GPI(4),   17  },
+            {   "PI5",  SUNXI_GPI(5),   19  },
+            {   "PI6",  SUNXI_GPI(6),   21  },
+            {   "PI7",  SUNXI_GPI(7),   23  },
+            {   "PI8",  SUNXI_GPI(8),   25  },
+            {   "PI9",  SUNXI_GPI(9),   27  },
+            {   "PI10", SUNXI_GPI(10),  29  },
+            {   "PI11", SUNXI_GPI(11),  31  },
+            {   "PI12", SUNXI_GPI(12),  33  },
+            {   "PI13", SUNXI_GPI(13),  35  },
+            {   "PI14", SUNXI_GPI(14),  37  },
+            {   "PI15", SUNXI_GPI(15),  39  },
+            {   "PI16", SUNXI_GPI(16),  40  },
+            {   "PI17", SUNXI_GPI(17),  38  },
+            {   "PI18", SUNXI_GPI(18),  36  },
+            {   "PI19", SUNXI_GPI(19),  34  },
+            {   "PI20", SUNXI_GPI(20),  32  },
+            {   "PI21", SUNXI_GPI(21),  30  },
+            {   "PE0",  SUNXI_GPE(0),   6   },
+            {   "PE1",  SUNXI_GPE(1),   8   },
+            {   "PE2",  SUNXI_GPE(2),   10  },
+            {   "PE3",  SUNXI_GPE(3),   12  },
+            {   "PE4",  SUNXI_GPE(4),   14  },
+            {   "PE5",  SUNXI_GPE(5),   16  },
+            {   "PE6",  SUNXI_GPE(6),   18  },
+            {   "PE7",  SUNXI_GPE(7),   20  },
+            {   "PE8",  SUNXI_GPE(8),   22  },
+            {   "PE9",  SUNXI_GPE(9),   24  },
+            {   "PE10", SUNXI_GPE(10),  26  },
+            {   "PE11", SUNXI_GPE(11),  28  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio3",
+        {
+            {   "PH0",  SUNXI_GPH(0),   7   },
+            {   "PH7",  SUNXI_GPH(7),   9   },
+            {   "PH9",  SUNXI_GPH(9),   11  },
+            {   "PH10", SUNXI_GPH(10),  13  },
+            {   "PH11", SUNXI_GPH(11),  15  },
+            {   "PH12", SUNXI_GPH(12),  17  },
+            {   "PH13", SUNXI_GPH(13),  19  },
+            {   "PH14", SUNXI_GPH(14),  21  },
+            {   "PH15", SUNXI_GPH(15),  23  },
+            {   "PH16", SUNXI_GPH(16),  25  },
+            {   "PH17", SUNXI_GPH(17),  27  },
+            {   "PH18", SUNXI_GPH(18),  29  },
+            {   "PH19", SUNXI_GPH(19),  31  },
+            {   "PH20", SUNXI_GPH(20),  33  },
+            {   "PH21", SUNXI_GPH(21),  35  },
+            {   "PH22", SUNXI_GPH(22),  37  },
+            {   "PH23", SUNXI_GPH(23),  39  },
+            {   "PH24", SUNXI_GPH(24),  34  },
+            {   "PH25", SUNXI_GPH(25),  36  },
+            {   "PH26", SUNXI_GPH(26),  38  },
+            {   "PH27", SUNXI_GPH(27),  40  },
+            {   "PB3",  SUNXI_GPB(3),   6   },
+            {   "PB4",  SUNXI_GPB(4),   8   },
+            {   "PB5",  SUNXI_GPB(5),   10  },
+            {   "PB6",  SUNXI_GPB(6),   12  },
+            {   "PB7",  SUNXI_GPB(7),   14  },
+            {   "PB8",  SUNXI_GPB(8),   16  },
+            {   "PB10", SUNXI_GPB(10),  18  },
+            {   "PB11", SUNXI_GPB(11),  20  },
+            {   "PB12", SUNXI_GPB(12),  22  },
+            {   "PB13", SUNXI_GPB(13),  24  },
+            {   "PB14", SUNXI_GPB(14),  26  },
+            {   "PB15", SUNXI_GPB(15),  28  },
+            {   "PB16", SUNXI_GPB(16),  30  },
+            {   "PB17", SUNXI_GPB(17),  32  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio4",
+        {
+            {   "PC7",  SUNXI_GPC(7),   16  },
+            {   "PC16", SUNXI_GPC(16),  18  },
+            {   "PC17", SUNXI_GPC(17),  20  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"led",
+        {
+            {   "PH2",  SUNXI_GPH(2),   1},
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+};
+
+#endif

recipes-devtools/python/files/olinuxino-a13/mapping.h

@@ -0,0 +1,146 @@
+/*
+ *
+ * This file is part of pyA13.
+ * mapping.h is python GPIO extension.
+ *
+ * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
+ *
+ * pyA13 is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MAPPING_H
+#define __MAPPING_H
+
+#include "gpio_lib.h"
+
+/**
+Structure that describe all gpio
+*/
+typedef struct _pin {
+    char name[10];          // The processor pin
+    int offset;             // Memory offset for the pin
+    int pin_number;         // Number on the connector
+}pin_t;
+
+typedef struct _gpio {
+    char connector_name[10];
+    pin_t pins[41];
+}gpio_t;
+
+
+gpio_t gpio[] = {
+    {"lcd",
+        {
+                {   "PD18", SUNXI_GPD(18),  5   },
+                {   "PD18", SUNXI_GPD(18),  6   },
+                {   "PD18", SUNXI_GPD(18),  7   },
+                {   "PD19", SUNXI_GPD(19),  8   },
+                {   "PD20", SUNXI_GPD(20),  9   },
+                {   "PD21", SUNXI_GPD(21),  10  },
+                {   "PD22", SUNXI_GPD(22),  11  },
+                {   "PD23", SUNXI_GPD(23),  12  },
+                {   "PD10", SUNXI_GPD(10),  13  },
+                {   "PD10", SUNXI_GPD(10),  14  },
+                {   "PD10", SUNXI_GPD(10),  15  },
+                {   "PD11", SUNXI_GPD(11),  16  },
+                {   "PD12", SUNXI_GPD(12),  17  },
+                {   "PD13", SUNXI_GPD(13),  18  },
+                {   "PD14", SUNXI_GPD(14),  19  },
+                {   "PD15", SUNXI_GPD(15),  20  },
+                {   "PD2",  SUNXI_GPD(2),   21  },
+                {   "PD2",  SUNXI_GPD(2),   22  },
+                {   "PD2",  SUNXI_GPD(2),   23  },
+                {   "PD3",  SUNXI_GPD(3),   24  },
+                {   "PD4",  SUNXI_GPD(4),   25  },
+                {   "PD5",  SUNXI_GPD(5),   26  },
+                {   "PD6",  SUNXI_GPD(6),   27  },
+                {   "PD7",  SUNXI_GPD(7),   28  },
+                {   "PD26", SUNXI_GPD(26),  29  },
+                {   "PD27", SUNXI_GPD(27),  30  },
+                {   "PD24", SUNXI_GPD(24),  31  },
+                {   "PD25", SUNXI_GPD(25),  32  },
+                {   "PB3",  SUNXI_GPB(3),   33  },
+                {   "PB4",  SUNXI_GPB(4),   34  },
+                {   "PB10", SUNXI_GPB(10),  35  },
+                {   "PB2",  SUNXI_GPB(2),   36  },
+                {
+                    {   0,  0,  0}
+                },
+        }
+    },
+    {"gpio2",
+        {
+            {   "PB0",  SUNXI_GPB(0),   5   },
+            {   "PG11", SUNXI_GPG(11),  6   },
+            {   "PB1",  SUNXI_GPB(1),   7   },
+            {   "PG10", SUNXI_GPG(10),  8   },
+            {   "PB2",  SUNXI_GPB(2),   9   },
+            {   "PG9",  SUNXI_GPG(9),   10  },
+            {   "PB3",  SUNXI_GPB(3),   11  },
+            {   "PE11", SUNXI_GPE(11),  12  },
+            {   "PB4",  SUNXI_GPB(4),   13  },
+            {   "PE10", SUNXI_GPE(10),  14  },
+            {   "PB10", SUNXI_GPB(10),  15  },
+            {   "PE9",  SUNXI_GPE(9),   16  },
+            {   "PB15", SUNXI_GPB(15),  17  },
+            {   "PE8",  SUNXI_GPE(8),   18  },
+            {   "PB16", SUNXI_GPB(16),  19  },
+            {   "PE7",  SUNXI_GPE(7),   20  },
+            {   "PC0",  SUNXI_GPC(0),   21  },
+            {   "PE6",  SUNXI_GPE(6),   22  },
+            {   "PC1",  SUNXI_GPC(1),   23  },
+            {   "PE5",  SUNXI_GPE(5),   24  },
+            {   "PC2",  SUNXI_GPC(2),   25  },
+            {   "PE4",  SUNXI_GPE(4),   26  },
+            {   "PC3",  SUNXI_GPC(3),   27  },
+            {   "PC19", SUNXI_GPC(19),  28  },
+            {   "PC4",  SUNXI_GPC(4),   29  },
+            {   "PC15", SUNXI_GPC(15),  30  },
+            {   "PC5",  SUNXI_GPC(5),   31  },
+            {   "PC14", SUNXI_GPC(14),  32  },
+            {   "PC6",  SUNXI_GPC(6),   33  },
+            {   "PC13", SUNXI_GPC(13),  34  },
+            {   "PC7",  SUNXI_GPC(7),   35  },
+            {   "PC12", SUNXI_GPC(12),  36  },
+            {   "PC8",  SUNXI_GPC(8),   37  },
+            {   "PC11", SUNXI_GPC(11),  38  },
+            {   "PC9",  SUNXI_GPC(9),   39  },
+            {   "PC10", SUNXI_GPC(10),  40  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+    {"uext",
+        {
+            {   "PG3",  SUNXI_GPG(3),   3   },
+            {   "PG3",  SUNXI_GPG(4),   4   },
+            {   "PB17", SUNXI_GPB(17),  5   },
+            {   "PB18", SUNXI_GPB(18),  6   },
+            {   "PE3",  SUNXI_GPE(3),   7   },
+            {   "PE2",  SUNXI_GPE(2),   8   },
+            {   "PE1",  SUNXI_GPE(1),   9   },
+            {   "PE0",  SUNXI_GPE(0),   10  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+};
+
+
+
+#endif

recipes-devtools/python/files/olinuxino-a13som/mapping.h

@@ -0,0 +1,147 @@
+/*
+ *
+ * This file is part of pyA13SOM.
+ * mapping.h is python GPIO extension.
+ *
+ * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
+ *
+ * pyA13SOM is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MAPPING_H
+#define __MAPPING_H
+
+#include "gpio_lib.h"
+
+/**
+Structure that describe all gpio
+*/
+typedef struct _pin {
+    char name[10];          // The processor pin
+    int offset;             // Memory offset for the pin
+    int pin_number;         // Number on the connector
+}pin_t;
+
+typedef struct _gpio {
+    char connector_name[10];
+    pin_t pins[41];
+}gpio_t;
+
+
+gpio_t gpio[] = {
+    {"lcd",
+        {
+            {   "PD18", SUNXI_GPD(18),  5   },
+            {   "PD18", SUNXI_GPD(18),  6   },
+            {   "PD18", SUNXI_GPD(18),  7   },
+            {   "PD19", SUNXI_GPD(19),  8   },
+            {   "PD20", SUNXI_GPD(20),  9   },
+            {   "PD21", SUNXI_GPD(21),  10  },
+            {   "PD22", SUNXI_GPD(22),  11  },
+            {   "PD23", SUNXI_GPD(23),  12  },
+            {   "PD10", SUNXI_GPD(10),  13  },
+            {   "PD10", SUNXI_GPD(10),  14  },
+            {   "PD10", SUNXI_GPD(10),  15  },
+            {   "PD11", SUNXI_GPD(11),  16  },
+            {   "PD12", SUNXI_GPD(12),  17  },
+            {   "PD13", SUNXI_GPD(13),  18  },
+            {   "PD14", SUNXI_GPD(14),  19  },
+            {   "PD15", SUNXI_GPD(15),  20  },
+            {   "PD2",  SUNXI_GPD(2),   21  },
+            {   "PD2",  SUNXI_GPD(2),   22  },
+            {   "PD2",  SUNXI_GPD(2),   23  },
+            {   "PD3",  SUNXI_GPD(3),   24  },
+            {   "PD4",  SUNXI_GPD(4),   25  },
+            {   "PD5",  SUNXI_GPD(5),   26  },
+            {   "PD6",  SUNXI_GPD(6),   27  },
+            {   "PD7",  SUNXI_GPD(7),   28  },
+            {   "PD26", SUNXI_GPD(26),  29  },
+            {   "PD27", SUNXI_GPD(27),  30  },
+            {   "PD24", SUNXI_GPD(24),  31  },
+            {   "PD25", SUNXI_GPD(25),  32  },
+            {   "PB3",  SUNXI_GPB(3),   33  },
+            {   "PB4",  SUNXI_GPB(4),   34  },
+            {   "PB10", SUNXI_GPB(10),  35  },
+            {   "PB2",  SUNXI_GPB(2),   36  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+    {"gpio1",
+        {
+            {   "PB0",  SUNXI_GPB(0),   5   },
+            {   "PG11", SUNXI_GPG(11),  6   },
+            {   "PB1",  SUNXI_GPB(1),   7   },
+            {   "PG10", SUNXI_GPG(10),  8   },
+            {   "PB2",  SUNXI_GPB(2),   9   },
+            {   "PG9",  SUNXI_GPG(9),   10  },
+            {   "PB3",  SUNXI_GPB(3),   11  },
+            {   "PE11", SUNXI_GPE(11),  12  },
+            {   "PB4",  SUNXI_GPB(4),   13  },
+            {   "PE10", SUNXI_GPE(10),  14  },
+            {   "PB10", SUNXI_GPB(10),  15  },
+            {   "PE9",  SUNXI_GPE(9),   16  },
+            {   "PB15", SUNXI_GPB(15),  17  },
+            {   "PE8",  SUNXI_GPE(8),   18  },
+            {   "PB16", SUNXI_GPB(16),  19  },
+            {   "PE7",  SUNXI_GPE(7),   20  },
+            {   "PC0",  SUNXI_GPC(0),   21  },
+            {   "PE6",  SUNXI_GPE(6),   22  },
+            {   "PC1",  SUNXI_GPC(1),   23  },
+            {   "PE5",  SUNXI_GPE(5),   24  },
+            {   "PC2",  SUNXI_GPC(2),   25  },
+            {   "PE4",  SUNXI_GPE(4),   26  },
+            {   "PC3",  SUNXI_GPC(3),   27  },
+            {   "PC19", SUNXI_GPC(19),  28  },
+            {   "PC4",  SUNXI_GPC(4),   29  },
+            {   "PC15", SUNXI_GPC(15),  30  },
+            {   "PC5",  SUNXI_GPC(5),   31  },
+            {   "PC14", SUNXI_GPC(14),  32  },
+            {   "PC6",  SUNXI_GPC(6),   33  },
+            {   "PC13", SUNXI_GPC(13),  34  },
+            {   "PC7",  SUNXI_GPC(7),   35  },
+            {   "PC12", SUNXI_GPC(12),  36  },
+            {   "PC8",  SUNXI_GPC(8),   37  },
+            {   "PC11", SUNXI_GPC(11),  38  },
+            {   "PC9",  SUNXI_GPC(9),   39  },
+            {   "PC10", SUNXI_GPC(10),  40  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+    {"gpio3",
+        {
+            {   "PE0",  SUNXI_GPE(0),   1   },
+            {   "PG1",  SUNXI_GPG(1),   2   },
+            {   "PE1",  SUNXI_GPE(1),   3   },
+            {   "PG2",  SUNXI_GPG(2),   4   },
+            {   "PE2",  SUNXI_GPE(2),   5   },
+            {   "PG12", SUNXI_GPG(12),  6   },
+            {   "PE3",  SUNXI_GPE(3),   7   },
+            {   "PB17", SUNXI_GPB(17),  8   },
+            {   "PB18", SUNXI_GPB(18),  10  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+};
+
+
+
+#endif

recipes-devtools/python/files/olinuxino-a20/mapping.h

@@ -0,0 +1,303 @@
+/*
+ *
+ * This file is part of pyA20.
+ * mapping.h is python GPIO extension.
+ *
+ * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
+ *
+ * pyA20 is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MAPPING_H
+#define __MAPPING_H
+
+#include "gpio_lib.h"
+
+/**
+Structure that describe all gpio
+*/
+typedef struct _pin {
+    char name[10];          // The processor pin
+    int offset;             // Memory offset for the pin
+    int pin_number;         // Number on the connector
+}pin_t;
+
+typedef struct _gpio {
+    char connector_name[10];
+    pin_t pins[41];
+}gpio_t;
+
+
+gpio_t gpio[] = {
+    {"lcd",
+        {
+                {   "PD16", SUNXI_GPD(16),  5   },
+                {   "PD17", SUNXI_GPD(17),  6   },
+                {   "PD18", SUNXI_GPD(18),  7   },
+                {   "PD19", SUNXI_GPD(19),  8   },
+                {   "PD20", SUNXI_GPD(20),  9   },
+                {   "PD21", SUNXI_GPD(21),  10  },
+                {   "PD22", SUNXI_GPD(22),  11  },
+                {   "PD23", SUNXI_GPD(23),  12  },
+                {   "PD8",  SUNXI_GPD(8),   13  },
+                {   "PD9",  SUNXI_GPD(9),   14  },
+                {   "PD10", SUNXI_GPD(10),  15  },
+                {   "PD11", SUNXI_GPD(11),  16  },
+                {   "PD12", SUNXI_GPD(12),  17  },
+                {   "PD13", SUNXI_GPD(13),  18  },
+                {   "PD14", SUNXI_GPD(14),  19  },
+                {   "PD15", SUNXI_GPD(15),  20  },
+                {   "PD0",  SUNXI_GPD(0),   21  },
+                {   "PD1",  SUNXI_GPD(1),   22  },
+                {   "PD2",  SUNXI_GPD(2),   23  },
+                {   "PD3",  SUNXI_GPD(3),   24  },
+                {   "PD4",  SUNXI_GPD(4),   25  },
+                {   "PD5",  SUNXI_GPD(5),   26  },
+                {   "PD6",  SUNXI_GPD(6),   27  },
+                {   "PD7",  SUNXI_GPD(7),   28  },
+                {   "PD26", SUNXI_GPD(26),  29  },
+                {   "PD27", SUNXI_GPD(27),  30  },
+                {   "PD24", SUNXI_GPD(24),  31  },
+                {   "PD25", SUNXI_GPD(25),  32  },
+                {   "PH8",  SUNXI_GPH(8),    35  },
+                {   "PB2",  SUNXI_GPB(2),   36  },
+                {
+                    {   0,  0,  0}
+                },
+        }
+    },
+    /*
+    #define PIN_PG0		SUNXI_GPG(0)
+#define PIN_PG1		SUNXI_GPG(1)
+#define PIN_PG2		SUNXI_GPG(2)
+#define PIN_PG3		SUNXI_GPG(3)
+#define PIN_PG4		SUNXI_GPG(4)
+#define PIN_PG5		SUNXI_GPG(5)
+#define PIN_PG6		SUNXI_GPG(6)
+#define PIN_PG7		SUNXI_GPG(7)
+#define PIN_PG8		SUNXI_GPG(8)
+#define PIN_PG9		SUNXI_GPG(9)
+#define PIN_PG10	SUNXI_GPG(10)
+#define PIN_PG11	SUNXI_GPG(11)
+*/  {"gpio1",
+        {
+            {   "PG0",  SUNXI_GPG(0),   5   },
+            {   "PG1",  SUNXI_GPG(0),   7   },
+            {   "PG2",  SUNXI_GPG(0),   9   },
+            {   "PG3",  SUNXI_GPG(0),   11  },
+            {   "PG4",  SUNXI_GPG(0),   13  },
+            {   "PG5",  SUNXI_GPG(0),   15  },
+            {   "PG6",  SUNXI_GPG(0),   17  },
+            {   "PG7",  SUNXI_GPG(0),   19  },
+            {   "PG8",  SUNXI_GPG(0),   21  },
+            {   "PG9",  SUNXI_GPG(0),   23  },
+            {   "PG10", SUNXI_GPG(0),   25  },
+            {   "PG11", SUNXI_GPG(0),   27  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    /*
+    //GPIO 2
+#define PIN_PE0		SUNXI_GPE(0)
+#define PIN_PE1		SUNXI_GPE(1)
+#define PIN_PI0		SUNXI_GPI(0)
+#define PIN_PE2		SUNXI_GPE(2)
+#define PIN_PI1		SUNXI_GPI(1)
+#define PIN_PE3		SUNXI_GPE(3)
+#define PIN_PI2		SUNXI_GPI(2)
+#define PIN_PE4		SUNXI_GPE(4)
+#define PIN_PI3		SUNXI_GPI(3)
+#define PIN_PE5		SUNXI_GPE(5)
+#define PIN_PI10	SUNXI_GPI(10)
+#define PIN_PE6		SUNXI_GPE(6)
+#define PIN_PI11	SUNXI_GPI(11)
+#define PIN_PE7		SUNXI_GPE(7)
+#define PIN_PC3		SUNXI_GPC(3)
+#define PIN_PE8		SUNXI_GPE(8)
+#define PIN_PC7		SUNXI_GPC(7)
+#define PIN_PE9		SUNXI_GPE(9)
+#define PIN_PC16	SUNXI_GPC(16)
+#define PIN_PE10	SUNXI_GPE(10)
+#define PIN_PC17	SUNXI_GPC(17)
+#define PIN_PE11	SUNXI_GPE(11)
+#define PIN_PC18	SUNXI_GPC(18)
+#define PIN_PI14	SUNXI_GPI(14)
+#define PIN_PC23	SUNXI_GPC(23)
+#define PIN_PI15	SUNXI_GPI(15)
+#define PIN_PC24	SUNXI_GPC(24)
+#define PIN_PB23	SUNXI_GPB(23)
+#define PIN_PB22	SUNXI_GPB(22)
+*/
+    {"gpio2",
+        {
+            {   "PE0",  SUNXI_GPE(0),   6   },
+            {   "PE1",  SUNXI_GPE(1),   8   },
+            {   "PI0",  SUNXI_GPI(0),   9   },
+            {   "PE2",  SUNXI_GPE(2),   10  },
+            {   "PI1",  SUNXI_GPI(1),   11  },
+            {   "PE3",  SUNXI_GPE(3),   12  },
+            {   "PI2",  SUNXI_GPI(2),   13  },
+            {   "PE4",  SUNXI_GPE(4),   14  },
+            {   "PI3",  SUNXI_GPI(3),   15  },
+            {   "PE5",  SUNXI_GPE(5),   16  },
+            {   "PI10", SUNXI_GPI(10),  17  },
+            {   "PE6",  SUNXI_GPE(6),   18  },
+            {   "PI11", SUNXI_GPI(11),  19  },
+            {   "PE7",  SUNXI_GPE(7),   20  },
+            {   "PC3",  SUNXI_GPC(3),   21  },
+            {   "PE8",  SUNXI_GPE(8),   22  },
+            {   "PC7",  SUNXI_GPC(7),   23  },
+            {   "PE9",  SUNXI_GPE(9),   24  },
+            {   "PC16", SUNXI_GPC(16),  25  },
+            {   "PE10", SUNXI_GPE(10),  26  },
+            {   "PC17", SUNXI_GPC(17),  27  },
+            {   "PE11", SUNXI_GPE(11),  28  },
+            {   "PC18", SUNXI_GPC(18),  29  },
+            {   "PI14", SUNXI_GPI(14),  30  },
+            {   "PC23", SUNXI_GPC(23),  31  },
+            {   "PI15", SUNXI_GPI(15),  32  },
+            {   "PC24", SUNXI_GPC(24),  33  },
+            {   "PB23", SUNXI_GPB(23),  34  },
+            {   "PB22", SUNXI_GPB(22),  36  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+/*
+//GPIO 3
+#define PIN_PH0		SUNXI_GPH(0)
+#define PIN_PB3		SUNXI_GPB(3)
+#define PIN_PH2		SUNXI_GPH(2)
+#define PIN_PB4		SUNXI_GPB(4)
+#define PIN_PH7		SUNXI_GPH(7)
+#define PIN_PB5		SUNXI_GPB(5)
+#define PIN_PH9		SUNXI_GPH(9)
+#define PIN_PB6		SUNXI_GPB(6)
+#define PIN_PH10	SUNXI_GPH(10)
+#define PIN_PB7		SUNXI_GPB(7)
+#define PIN_PH11	SUNXI_GPH(11)
+#define PIN_PB8		SUNXI_GPB(8)
+#define PIN_PH12	SUNXI_GPH(12)
+#define PIN_PB10	SUNXI_GPB(10)
+#define PIN_PH13	SUNXI_GPH(13)
+#define PIN_PB11	SUNXI_GPB(11)
+#define PIN_PH14	SUNXI_GPH(14)
+#define PIN_PB12	SUNXI_GPB(12)
+#define PIN_PH15	SUNXI_GPH(15)
+#define PIN_PB13	SUNXI_GPB(13)
+#define PIN_PH16	SUNXI_GPH(16)
+#define PIN_PB14	SUNXI_GPB(14)
+#define PIN_PH17	SUNXI_GPH(17)
+#define PIN_PB15	SUNXI_GPB(15)
+#define PIN_PH18	SUNXI_GPH(18)
+#define PIN_PB16	SUNXI_GPB(16)
+#define PIN_PH19	SUNXI_GPH(19)
+#define PIN_PB17	SUNXI_GPB(17)
+#define PIN_PH20	SUNXI_GPH(20)
+#define PIN_PH24	SUNXI_GPH(24)
+#define PIN_PH21	SUNXI_GPH(21)
+#define PIN_PH25	SUNXI_GPH(25)
+#define PIN_PH22	SUNXI_GPH(22)
+#define PIN_PH26	SUNXI_GPH(26)
+#define PIN_PH23	SUNXI_GPH(23)
+#define PIN_PH27	SUNXI_GPH(27)
+*/
+    {"gpio3",
+        {
+            {   "PH0",  SUNXI_GPH(0),   5   },
+            {   "PB3",  SUNXI_GPB(3),   6   },
+            {   "PH2",  SUNXI_GPH(2),   7   },
+            {   "PB4",  SUNXI_GPB(4),   8   },
+            {   "PH7",  SUNXI_GPH(7),   9   },
+            {   "PB5",  SUNXI_GPB(5),   10  },
+            {   "PH9",  SUNXI_GPH(9),   11  },
+            {   "PB6",  SUNXI_GPB(6),   12  },
+            {   "PH10", SUNXI_GPH(10),  13  },
+            {   "PB7",  SUNXI_GPB(7),   14  },
+            {   "PH11", SUNXI_GPH(11),  15  },
+            {   "PB8",  SUNXI_GPB(8),   16  },
+            {   "PH12", SUNXI_GPH(12),  17  },
+            {   "PB10", SUNXI_GPB(10),  18  },
+            {   "PH13", SUNXI_GPH(13),  19  },
+            {   "PB11", SUNXI_GPB(11),  20  },
+            {   "PH14", SUNXI_GPH(14),  21  },
+            {   "PB12", SUNXI_GPB(12),  22  },
+            {   "PH15", SUNXI_GPH(15),  23  },
+            {   "PB13", SUNXI_GPB(13),  24  },
+            {   "PH16", SUNXI_GPH(16),  25  },
+            {   "PB14", SUNXI_GPB(14),  26  },
+            {   "PH17", SUNXI_GPH(17),  27  },
+            {   "PB15", SUNXI_GPB(15),  28  },
+            {   "PH18", SUNXI_GPH(18),  29  },
+            {   "PB16", SUNXI_GPB(16),  30  },
+            {   "PH19", SUNXI_GPH(19),  31  },
+            {   "PB17", SUNXI_GPB(17),  32  },
+            {   "PH20", SUNXI_GPH(20),  33  },
+            {   "PH24", SUNXI_GPH(24),  34  },
+            {   "PH21", SUNXI_GPH(21),  35  },
+            {   "PH25", SUNXI_GPH(25),  36  },
+            {   "PH22", SUNXI_GPH(22),  37  },
+            {   "PH26", SUNXI_GPH(26),  38  },
+            {   "PH23", SUNXI_GPH(23),  39  },
+            {   "PH27", SUNXI_GPH(27),  40  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+
+    {"uext1",
+        {
+            {   "PI12", SUNXI_GPI(12),   3   },
+            {   "PI13", SUNXI_GPI(13),   4   },
+            {   "PB20", SUNXI_GPB(20),   5   },
+            {   "PB21", SUNXI_GPB(21),   6   },
+            {   "PC22", SUNXI_GPC(22),   7   },
+            {   "PC21", SUNXI_GPC(21),   8   },
+            {   "PC20", SUNXI_GPC(20),   9   },
+            {   "PC19", SUNXI_GPC(19),   10  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"uext2",
+        {
+            {   "PI20", SUNXI_GPI(20),   3   },
+            {   "PI21", SUNXI_GPI(21),   4   },
+            {   "PB18", SUNXI_GPB(18),   5   },
+            {   "PB19", SUNXI_GPB(19),   6   },
+            {   "PI19", SUNXI_GPI(19),   7   },
+            {   "PI18", SUNXI_GPI(18),   8   },
+            {   "PI17", SUNXI_GPI(17),   9   },
+            {   "PI16", SUNXI_GPI(16),   10  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+};
+
+
+
+#endif

recipes-devtools/python/files/olinuxino-a20lime/mapping.h

@@ -0,0 +1,221 @@
+/*
+ *
+ * This file is part of pyA20Lime.
+ * mapping.h is python GPIO extension.
+ *
+ * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
+ *
+ * pyA20Lime is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MAPPING_H
+#define __MAPPING_H
+
+#include "gpio_lib.h"
+
+/**
+Structure that describe all gpio
+*/
+typedef struct _pin {
+    char name[10];          // The processor pin
+    int offset;             // Memory offset for the pin
+    int pin_number;         // Number on the connector
+}pin_t;
+
+typedef struct _gpio {
+    char connector_name[10];
+    pin_t pins[41];
+}gpio_t;
+
+
+gpio_t gpio[] = {
+    {"lcd",
+        {
+            {   "PD16", SUNXI_GPD(16),  5   },
+            {   "PD17", SUNXI_GPD(17),  6   },
+            {   "PD18", SUNXI_GPD(18),  7   },
+            {   "PD19", SUNXI_GPD(19),  8   },
+            {   "PD20", SUNXI_GPD(20),  9   },
+            {   "PD21", SUNXI_GPD(21),  10  },
+            {   "PD22", SUNXI_GPD(22),  11  },
+            {   "PD23", SUNXI_GPD(23),  12  },
+            {   "PD8",  SUNXI_GPD(8),   13  },
+            {   "PD9",  SUNXI_GPD(9),   14  },
+            {   "PD10", SUNXI_GPD(10),  15  },
+            {   "PD11", SUNXI_GPD(11),  16  },
+            {   "PD12", SUNXI_GPD(12),  17  },
+            {   "PD13", SUNXI_GPD(13),  18  },
+            {   "PD14", SUNXI_GPD(14),  19  },
+            {   "PD15", SUNXI_GPD(15),  20  },
+            {   "PD0",  SUNXI_GPD(0),   21  },
+            {   "PD1",  SUNXI_GPD(1),   22  },
+            {   "PD2",  SUNXI_GPD(2),   23  },
+            {   "PD3",  SUNXI_GPD(3),   24  },
+            {   "PD4",  SUNXI_GPD(4),   25  },
+            {   "PD5",  SUNXI_GPD(5),   26  },
+            {   "PD6",  SUNXI_GPD(6),   27  },
+            {   "PD7",  SUNXI_GPD(7),   28  },
+            {   "PD26", SUNXI_GPD(26),  29  },
+            {   "PD27", SUNXI_GPD(27),  30  },
+            {   "PD24", SUNXI_GPD(24),  31  },
+            {   "PD25", SUNXI_GPD(25),  32  },
+            {   "PH8",  SUNXI_GPH(8),   35  },
+            {   "PB2",  SUNXI_GPB(2),   36  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio1",
+        {
+            {   "PG0",  SUNXI_GPG(0),   5   },
+            {   "PG1",  SUNXI_GPG(1),   7   },
+            {   "PG2",  SUNXI_GPG(2),   9   },
+            {   "PG3",  SUNXI_GPG(3),   11  },
+            {   "PG4",  SUNXI_GPG(4),   13  },
+            {   "PG5",  SUNXI_GPG(5),   15  },
+            {   "PG6",  SUNXI_GPG(6),   17  },
+            {   "PG7",  SUNXI_GPG(7),   19  },
+            {   "PG8",  SUNXI_GPG(8),   21  },
+            {   "PG9",  SUNXI_GPG(9),   23  },
+            {   "PG10", SUNXI_GPG(10),  25  },
+            {   "PG11", SUNXI_GPG(11),  27  },
+            {   "PC3",  SUNXI_GPC(3),   29  },
+            {   "PC18", SUNXI_GPC(18),  31  },
+            {   "PC19", SUNXI_GPC(19),  33  },
+            {   "PC20", SUNXI_GPC(20),  35  },
+            {   "PC21", SUNXI_GPC(21),  37  },
+            {   "PC22", SUNXI_GPC(22),  39  },
+            {   "PC23", SUNXI_GPC(23),  40  },
+            {   "PC24", SUNXI_GPC(24),  38  },
+            {   "PB18", SUNXI_GPB(18),  36  },
+            {   "PB19", SUNXI_GPB(19),  34  },
+            {   "PB20", SUNXI_GPB(20),  32  },
+            {   "PB21", SUNXI_GPB(21),  30  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio2",
+        {
+            {   "PI0",  SUNXI_GPI(0),   9   },
+            {   "PI1",  SUNXI_GPI(1),   11  },
+            {   "PI2",  SUNXI_GPI(2),   13  },
+            {   "PI3",  SUNXI_GPI(3),   15  },
+            {   "PI4",  SUNXI_GPI(4),   17  },
+            {   "PI5",  SUNXI_GPI(5),   19  },
+            {   "PI6",  SUNXI_GPI(6),   21  },
+            {   "PI7",  SUNXI_GPI(7),   23  },
+            {   "PI8",  SUNXI_GPI(8),   25  },
+            {   "PI9",  SUNXI_GPI(9),   27  },
+            {   "PI10", SUNXI_GPI(10),  29  },
+            {   "PI11", SUNXI_GPI(11),  31  },
+            {   "PI12", SUNXI_GPI(12),  33  },
+            {   "PI13", SUNXI_GPI(13),  35  },
+            {   "PI14", SUNXI_GPI(14),  37  },
+            {   "PI15", SUNXI_GPI(15),  39  },
+            {   "PI16", SUNXI_GPI(16),  40  },
+            {   "PI17", SUNXI_GPI(17),  38  },
+            {   "PI18", SUNXI_GPI(18),  36  },
+            {   "PI19", SUNXI_GPI(19),  34  },
+            {   "PI20", SUNXI_GPI(20),  32  },
+            {   "PI21", SUNXI_GPI(21),  30  },
+            {   "PE0",  SUNXI_GPE(0),   6   },
+            {   "PE1",  SUNXI_GPE(1),   8   },
+            {   "PE2",  SUNXI_GPE(2),   10  },
+            {   "PE3",  SUNXI_GPE(3),   12  },
+            {   "PE4",  SUNXI_GPE(4),   14  },
+            {   "PE5",  SUNXI_GPE(5),   16  },
+            {   "PE6",  SUNXI_GPE(6),   18  },
+            {   "PE7",  SUNXI_GPE(7),   20  },
+            {   "PE8",  SUNXI_GPE(8),   22  },
+            {   "PE9",  SUNXI_GPE(9),   24  },
+            {   "PE10", SUNXI_GPE(10),  26  },
+            {   "PE11", SUNXI_GPE(11),  28  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio3",
+        {
+            {   "PH0",  SUNXI_GPH(0),   7   },
+            {   "PH7",  SUNXI_GPH(7),   9   },
+            {   "PH9",  SUNXI_GPH(9),   11  },
+            {   "PH10", SUNXI_GPH(10),  13  },
+            {   "PH11", SUNXI_GPH(11),  15  },
+            {   "PH12", SUNXI_GPH(12),  17  },
+            {   "PH13", SUNXI_GPH(13),  19  },
+            {   "PH14", SUNXI_GPH(14),  21  },
+            {   "PH15", SUNXI_GPH(15),  23  },
+            {   "PH16", SUNXI_GPH(16),  25  },
+            {   "PH17", SUNXI_GPH(17),  27  },
+            {   "PH18", SUNXI_GPH(18),  29  },
+            {   "PH19", SUNXI_GPH(19),  31  },
+            {   "PH20", SUNXI_GPH(20),  33  },
+            {   "PH21", SUNXI_GPH(21),  35  },
+            {   "PH22", SUNXI_GPH(22),  37  },
+            {   "PH23", SUNXI_GPH(23),  39  },
+            {   "PH24", SUNXI_GPH(24),  34  },
+            {   "PH25", SUNXI_GPH(25),  36  },
+            {   "PH26", SUNXI_GPH(26),  38  },
+            {   "PH27", SUNXI_GPH(27),  40  },
+            {   "PB3",  SUNXI_GPB(3),   6   },
+            {   "PB4",  SUNXI_GPB(4),   8   },
+            {   "PB5",  SUNXI_GPB(5),   10  },
+            {   "PB6",  SUNXI_GPB(6),   12  },
+            {   "PB7",  SUNXI_GPB(7),   14  },
+            {   "PB8",  SUNXI_GPB(8),   16  },
+            {   "PB10", SUNXI_GPB(10),  18  },
+            {   "PB11", SUNXI_GPB(11),  20  },
+            {   "PB12", SUNXI_GPB(12),  22  },
+            {   "PB13", SUNXI_GPB(13),  24  },
+            {   "PB14", SUNXI_GPB(14),  26  },
+            {   "PB15", SUNXI_GPB(15),  28  },
+            {   "PB16", SUNXI_GPB(16),  30  },
+            {   "PB17", SUNXI_GPB(17),  32  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio4",
+        {
+            {   "PC7",  SUNXI_GPC(7),   16  },
+            {   "PC16", SUNXI_GPC(16),  18  },
+            {   "PC17", SUNXI_GPC(17),  20  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"led",
+        {
+            {   "PH2",  SUNXI_GPH(2),   1},
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+};
+
+#endif

recipes-devtools/python/files/olinuxino-a20lime2/mapping.h

@@ -0,0 +1,224 @@
+/*
+ *
+ * This file is part of pyA20Lime2.
+ * mapping.h is python GPIO extension.
+ *
+ * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
+ *
+ * pyA20Lime2 is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MAPPING_H
+#define __MAPPING_H
+
+#include "gpio_lib.h"
+
+/**
+Structure that describe all gpio
+*/
+typedef struct _pin {
+    char name[10];          // The processor pin
+    int offset;             // Memory offset for the pin
+    int pin_number;         // Number on the connector
+}pin_t;
+
+typedef struct _gpio {
+    char connector_name[10];
+    pin_t pins[41];
+}gpio_t;
+
+
+gpio_t gpio[] = {
+    {"lcd",
+        {
+            {   "PD16", SUNXI_GPD(16),  5   },
+            {   "PD17", SUNXI_GPD(17),  6   },
+            {   "PD18", SUNXI_GPD(18),  7   },
+            {   "PD19", SUNXI_GPD(19),  8   },
+            {   "PD20", SUNXI_GPD(20),  9   },
+            {   "PD21", SUNXI_GPD(21),  10  },
+            {   "PD22", SUNXI_GPD(22),  11  },
+            {   "PD23", SUNXI_GPD(23),  12  },
+            {   "PD8",  SUNXI_GPD(8),   13  },
+            {   "PD9",  SUNXI_GPD(9),   14  },
+            {   "PD10", SUNXI_GPD(10),  15  },
+            {   "PD11", SUNXI_GPD(11),  16  },
+            {   "PD12", SUNXI_GPD(12),  17  },
+            {   "PD13", SUNXI_GPD(13),  18  },
+            {   "PD14", SUNXI_GPD(14),  19  },
+            {   "PD15", SUNXI_GPD(15),  20  },
+            {   "PD0",  SUNXI_GPD(0),   21  },
+            {   "PD1",  SUNXI_GPD(1),   22  },
+            {   "PD2",  SUNXI_GPD(2),   23  },
+            {   "PD3",  SUNXI_GPD(3),   24  },
+            {   "PD4",  SUNXI_GPD(4),   25  },
+            {   "PD5",  SUNXI_GPD(5),   26  },
+            {   "PD6",  SUNXI_GPD(6),   27  },
+            {   "PD7",  SUNXI_GPD(7),   28  },
+            {   "PD26", SUNXI_GPD(26),  29  },
+            {   "PD27", SUNXI_GPD(27),  30  },
+            {   "PD24", SUNXI_GPD(24),  31  },
+            {   "PD25", SUNXI_GPD(25),  32  },
+            {   "PH8",  SUNXI_GPH(8),   35  },
+            {   "PB2",  SUNXI_GPB(2),   36  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio1",
+        {
+            {   "PG0",  SUNXI_GPG(0),   5   },
+            {   "PG1",  SUNXI_GPG(1),   7   },
+            {   "PG2",  SUNXI_GPG(2),   9   },
+            {   "PG3",  SUNXI_GPG(3),   11  },
+            {   "PG4",  SUNXI_GPG(4),   13  },
+            {   "PG5",  SUNXI_GPG(5),   15  },
+            {   "PG6",  SUNXI_GPG(6),   17  },
+            {   "PG7",  SUNXI_GPG(7),   19  },
+            {   "PG8",  SUNXI_GPG(8),   21  },
+            {   "PG9",  SUNXI_GPG(9),   23  },
+            {   "PG10", SUNXI_GPG(10),  25  },
+            {   "PG11", SUNXI_GPG(11),  27  },
+            {   "PC3",  SUNXI_GPC(3),   29  },
+            {   "PC18", SUNXI_GPC(18),  31  },
+            {   "PC19", SUNXI_GPC(19),  33  },
+            {   "PC20", SUNXI_GPC(20),  35  },
+            {   "PC21", SUNXI_GPC(21),  37  },
+            {   "PC22", SUNXI_GPC(22),  39  },
+            {   "PC23", SUNXI_GPC(23),  40  },
+            {   "PC24", SUNXI_GPC(24),  38  },
+            {   "PB18", SUNXI_GPB(18),  36  },
+            {   "PB19", SUNXI_GPB(19),  34  },
+            {   "PB20", SUNXI_GPB(20),  32  },
+            {   "PB21", SUNXI_GPB(21),  30  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio2",
+        {
+            {   "PI0",  SUNXI_GPI(0),   9   },
+            {   "PI1",  SUNXI_GPI(1),   11  },
+            {   "PI2",  SUNXI_GPI(2),   13  },
+            {   "PI3",  SUNXI_GPI(3),   15  },
+            {   "PI4",  SUNXI_GPI(4),   17  },
+            {   "PI5",  SUNXI_GPI(5),   19  },
+            {   "PI6",  SUNXI_GPI(6),   21  },
+            {   "PI7",  SUNXI_GPI(7),   23  },
+            {   "PI8",  SUNXI_GPI(8),   25  },
+            {   "PI9",  SUNXI_GPI(9),   27  },
+            {   "PI10", SUNXI_GPI(10),  29  },
+            {   "PI11", SUNXI_GPI(11),  31  },
+            {   "PI12", SUNXI_GPI(12),  33  },
+            {   "PI13", SUNXI_GPI(13),  35  },
+            {   "PI14", SUNXI_GPI(14),  37  },
+            {   "PI15", SUNXI_GPI(15),  39  },
+            {   "PI16", SUNXI_GPI(16),  40  },
+            {   "PI17", SUNXI_GPI(17),  38  },
+            {   "PI18", SUNXI_GPI(18),  36  },
+            {   "PI19", SUNXI_GPI(19),  34  },
+            {   "PI20", SUNXI_GPI(20),  32  },
+            {   "PI21", SUNXI_GPI(21),  30  },
+            {   "PE0",  SUNXI_GPE(0),   6   },
+            {   "PE1",  SUNXI_GPE(1),   8   },
+            {   "PE2",  SUNXI_GPE(2),   10  },
+            {   "PE3",  SUNXI_GPE(3),   12  },
+            {   "PE4",  SUNXI_GPE(4),   14  },
+            {   "PE5",  SUNXI_GPE(5),   16  },
+            {   "PE6",  SUNXI_GPE(6),   18  },
+            {   "PE7",  SUNXI_GPE(7),   20  },
+            {   "PE8",  SUNXI_GPE(8),   22  },
+            {   "PE9",  SUNXI_GPE(9),   24  },
+            {   "PE10", SUNXI_GPE(10),  26  },
+            {   "PE11", SUNXI_GPE(11),  28  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio3",
+        {
+            {   "PH0",  SUNXI_GPH(0),   7   },
+            {   "PH7",  SUNXI_GPH(7),   9   },
+            {   "PH9",  SUNXI_GPH(9),   11  },
+            {   "PH10", SUNXI_GPH(10),  13  },
+            {   "PH11", SUNXI_GPH(11),  15  },
+            {   "PH12", SUNXI_GPH(12),  17  },
+            {   "PH13", SUNXI_GPH(13),  19  },
+            {   "PH14", SUNXI_GPH(14),  21  },
+            {   "PH15", SUNXI_GPH(15),  23  },
+            {   "PH16", SUNXI_GPH(16),  25  },
+            {   "PH17", SUNXI_GPH(17),  27  },
+            {   "PH18", SUNXI_GPH(18),  29  },
+            {   "PH19", SUNXI_GPH(19),  31  },
+            {   "PH20", SUNXI_GPH(20),  33  },
+            {   "PH21", SUNXI_GPH(21),  35  },
+            {   "PH22", SUNXI_GPH(22),  37  },
+            {   "PH23", SUNXI_GPH(23),  39  },
+            {   "PH24", SUNXI_GPH(24),  34  },
+            {   "PH25", SUNXI_GPH(25),  36  },
+            {   "PH26", SUNXI_GPH(26),  38  },
+            {   "PH27", SUNXI_GPH(27),  40  },
+            {   "PB3",  SUNXI_GPB(3),   4   },
+            {   "PB4",  SUNXI_GPB(4),   6   },
+            {   "PB5",  SUNXI_GPB(5),   8  },
+            {   "PB6",  SUNXI_GPB(6),   10  },
+            {   "PB7",  SUNXI_GPB(7),   12  },
+            {   "PB8",  SUNXI_GPB(8),   14  },
+            {   "PB9",  SUNXI_GPB(8),   16  },
+            {   "PB10", SUNXI_GPB(10),  18  },
+            {   "PB11", SUNXI_GPB(11),  20  },
+            {   "PB12", SUNXI_GPB(12),  22  },
+            {   "PB13", SUNXI_GPB(13),  24  },
+            {   "PB14", SUNXI_GPB(14),  26  },
+            {   "PB15", SUNXI_GPB(15),  28  },
+            {   "PB16", SUNXI_GPB(16),  30  },
+            {   "PB17", SUNXI_GPB(17),  32  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio4",
+        {
+            {   "PA9",  SUNXI_GPA(9),   12  },
+            {   "PA14", SUNXI_GPA(14),  14  },
+            {   "PC7",  SUNXI_GPC(7),   16  },
+            {   "PC16", SUNXI_GPC(16),  18  },
+            {   "PC17", SUNXI_GPC(17),  20  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"led",
+        {
+            {   "PH2",  SUNXI_GPH(2),   1},
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+};
+
+#endif

recipes-devtools/python/files/olinuxino-a20som/mapping.h

@@ -0,0 +1,265 @@
+/*
+ *
+ * This file is part of pyA20SOM.
+ * mapping.h is python GPIO extension.
+ *
+ * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
+ *
+ * pyA20SOM is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MAPPING_H
+#define __MAPPING_H
+
+#include "gpio_lib.h"
+
+/**
+Structure that describe all gpio
+*/
+typedef struct _pin {
+    char name[10];          // The processor pin
+    int offset;             // Memory offset for the pin
+    int pin_number;         // Number on the connector
+}pin_t;
+
+typedef struct _gpio {
+    char connector_name[10];
+    pin_t pins[41];
+}gpio_t;
+
+
+gpio_t gpio[] = {
+    {"lcd",
+        {
+            {   "PD16", SUNXI_GPD(16),  5   },
+            {   "PD17", SUNXI_GPD(17),  6   },
+            {   "PD18", SUNXI_GPD(18),  7   },
+            {   "PD19", SUNXI_GPD(19),  8   },
+            {   "PD20", SUNXI_GPD(20),  9   },
+            {   "PD21", SUNXI_GPD(21),  10  },
+            {   "PD22", SUNXI_GPD(22),  11  },
+            {   "PD23", SUNXI_GPD(23),  12  },
+            {   "PD8", SUNXI_GPD(8),    13  },
+            {   "PD9", SUNXI_GPD(9),    14  },
+            {   "PD10", SUNXI_GPD(10),  15  },
+            {   "PD11", SUNXI_GPD(11),  16  },
+            {   "PD12", SUNXI_GPD(12),  17  },
+            {   "PD13", SUNXI_GPD(13),  18  },
+            {   "PD14", SUNXI_GPD(14),  19  },
+            {   "PD15", SUNXI_GPD(15),  20  },
+            {   "PD0",  SUNXI_GPD(0),   21  },
+            {   "PD1",  SUNXI_GPD(1),   22  },
+            {   "PD2",  SUNXI_GPD(2),   23  },
+            {   "PD3",  SUNXI_GPD(3),   24  },
+            {   "PD4",  SUNXI_GPD(4),   25  },
+            {   "PD5",  SUNXI_GPD(5),   26  },
+            {   "PD6",  SUNXI_GPD(6),   27  },
+            {   "PD7",  SUNXI_GPD(7),   28  },
+            {   "PD26", SUNXI_GPD(26),  29  },
+            {   "PD27", SUNXI_GPD(27),  30  },
+            {   "PD24", SUNXI_GPD(24),  31  },
+            {   "PD25", SUNXI_GPD(25),  32  },
+            {   "PH7",  SUNXI_GPH(7),   35  },
+            {   "PB2",  SUNXI_GPB(2),   36  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+    {"gpio1",
+        {
+            {   "PB9",  SUNXI_GPB(9),   7   },
+            {   "PH5",  SUNXI_GPH(5),   9   },
+            {   "PH4",  SUNXI_GPH(4),   11  },
+            {   "PH6",  SUNXI_GPH(6),   13  },
+            {   "PH3",  SUNXI_GPH(3),   15  },
+            {   "PI0",  SUNXI_GPI(0),   29  },
+            {   "PI1",  SUNXI_GPI(1),   31  },
+            {   "PI2",  SUNXI_GPI(2),   33  },
+            {   "PI3",  SUNXI_GPI(3),   35  },
+            {   "PI10", SUNXI_GPI(10),  37  },
+            {   "PI11", SUNXI_GPI(11),  39  },
+            {   "PI14", SUNXI_GPI(14),  40  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+    {"gpio2",
+        {
+            {   "PB22", SUNXI_GPB(22),  21  },
+            {   "PB23", SUNXI_GPB(23),  22  },
+            {   "PA0",  SUNXI_GPA(0),   29  },
+            {   "PA1",  SUNXI_GPA(1),   27  },
+            {   "PA2",  SUNXI_GPA(2),   25  },
+            {   "PA3",  SUNXI_GPA(3),   23  },
+            {   "PA4",  SUNXI_GPA(4),   30  },
+            {   "PA5",  SUNXI_GPA(5),   28  },
+            {   "PA6",  SUNXI_GPA(6),   26  },
+            {   "PA7",  SUNXI_GPA(7),   24  },
+            {   "PA8",  SUNXI_GPA(8),   33  },
+            {   "PA9",  SUNXI_GPA(9),   35  },
+            {   "PA10", SUNXI_GPA(10),  31  },
+            {   "PA11", SUNXI_GPA(11),  37  },
+            {   "PA12", SUNXI_GPA(12),  39  },
+            {   "PA13", SUNXI_GPA(13),  32  },
+            {   "PA14", SUNXI_GPA(14),  34  },
+            {   "PA15", SUNXI_GPA(15),  36  },
+            {   "PA16", SUNXI_GPA(16),  38  },
+            {   "PA17", SUNXI_GPA(17),  40  },
+
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio3",
+        {
+            {   "PH0",  SUNXI_GPH(0),   5   },
+            {   "PH2",  SUNXI_GPH(2),   7   },
+            {   "PH8",  SUNXI_GPH(8),   9   },
+            {   "PH9",  SUNXI_GPH(9),   11  },
+            {   "PH10", SUNXI_GPH(10),  13  },
+            {   "PH11", SUNXI_GPH(11),  15  },
+            {   "PH12", SUNXI_GPH(12),  17  },
+            {   "PH13", SUNXI_GPH(13),  19  },
+            {   "PH14", SUNXI_GPH(14),  21  },
+            {   "PH15", SUNXI_GPH(15),  23  },
+            {   "PH16", SUNXI_GPH(16),  25  },
+            {   "PH17", SUNXI_GPH(17),  27  },
+            {   "PH18", SUNXI_GPH(18),  29  },
+            {   "PH19", SUNXI_GPH(19),  31  },
+            {   "PH20", SUNXI_GPH(20),  33  },
+            {   "PH21", SUNXI_GPH(21),  35  },
+            {   "PH22", SUNXI_GPH(22),  37  },
+            {   "PH23", SUNXI_GPH(23),  39  },
+
+            {   "PB3",  SUNXI_GPB(3),   6   },
+            {   "PB4",  SUNXI_GPB(4),   8   },
+            {   "PB5",  SUNXI_GPB(5),   10  },
+            {   "PB6",  SUNXI_GPB(6),   12  },
+            {   "PB7",  SUNXI_GPB(7),   14  },
+            {   "PB8",  SUNXI_GPB(8),   16  },
+            {   "PB10",  SUNXI_GPB(10), 18  },
+            {   "PB11",  SUNXI_GPB(11), 20  },
+            {   "PB12",  SUNXI_GPB(12), 22  },
+            {   "PB13",  SUNXI_GPB(13), 24  },
+            {   "PB14",  SUNXI_GPB(14), 26  },
+            {   "PB15",  SUNXI_GPB(15), 28  },
+            {   "PB16",  SUNXI_GPB(16), 30  },
+            {   "PB17",  SUNXI_GPB(17), 32  },
+            {   "PH24",  SUNXI_GPH(24), 34  },
+            {   "PH25",  SUNXI_GPH(25), 36  },
+            {   "PH26",  SUNXI_GPH(26), 38  },
+            {   "PH27",  SUNXI_GPH(27), 40  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio4",
+        {
+            {   "PB0",  SUNXI_GPB(0),   5   },
+            {   "PB1",  SUNXI_GPB(1),   7   },
+            {   "PE0",  SUNXI_GPE(0),   6   },
+            {   "PE1",  SUNXI_GPE(1),   8   },
+            {   "PE2",  SUNXI_GPE(2),   10  },
+            {   "PE3",  SUNXI_GPE(3),   12  },
+            {   "PE4",  SUNXI_GPE(4),   14  },
+            {   "PE5",  SUNXI_GPE(5),   16  },
+            {   "PE6",  SUNXI_GPE(0),   18  },
+            {   "PE7",  SUNXI_GPE(0),   9   },
+            {   "PE8",  SUNXI_GPE(0),   11  },
+            {   "PE9",  SUNXI_GPE(0),   13  },
+            {   "PE10", SUNXI_GPE(0),   15  },
+            {   "PE11", SUNXI_GPE(0),   17  },
+            {   "PI20", SUNXI_GPI(20),  19  },
+            {   "PI21", SUNXI_GPI(21),  20  },
+            {   "PB18",  SUNXI_GPB(18), 21  },
+            {   "PB19",  SUNXI_GPB(19), 22  },
+            {   "PI16",  SUNXI_GPI(16), 23  },
+            {   "PI17",  SUNXI_GPI(17), 24  },
+            {   "PI18",  SUNXI_GPI(18), 25  },
+            {   "PI19",  SUNXI_GPI(19), 26  },
+            {   "PI12",  SUNXI_GPI(12), 27  },
+            {   "PI13",  SUNXI_GPI(13), 28  },
+            {   "PB20",  SUNXI_GPB(20), 29  },
+            {   "PB21",  SUNXI_GPB(21), 30  },
+            {   "PC22",  SUNXI_GPC(22), 31  },
+            {   "PC21",  SUNXI_GPC(21), 32  },
+            {   "PC20",  SUNXI_GPC(20), 33  },
+            {   "PC19",  SUNXI_GPC(21), 34  },
+            {   "PI15",  SUNXI_GPI(15), 36  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio5",
+        {
+            {   "PG0",  SUNXI_GPG(0),   1   },
+            {   "PG1",  SUNXI_GPG(1),   3   },
+            {   "PG2",  SUNXI_GPG(2),   5   },
+            {   "PG3",  SUNXI_GPG(3),   7   },
+            {   "PG4",  SUNXI_GPG(4),   9   },
+            {   "PG5",  SUNXI_GPG(5),   11  },
+            {   "PG6",  SUNXI_GPG(6),   13  },
+            {   "PG7",  SUNXI_GPG(7),   15  },
+            {   "PG8",  SUNXI_GPG(8),   17  },
+            {   "PG9",  SUNXI_GPG(9),   19  },
+            {   "PG10", SUNXI_GPG(10),  21  },
+            {   "PG11", SUNXI_GPG(11),  23  },
+            {   "PC8",  SUNXI_GPC(8),   25  },
+            {   "PC9",  SUNXI_GPC(9),   27  },
+            {   "PC10", SUNXI_GPC(10),  29  },
+            {   "PC11", SUNXI_GPC(11),  31  },
+            {   "PC12", SUNXI_GPC(12),  33  },
+            {   "PC13", SUNXI_GPC(13),  35  },
+            {   "PC14", SUNXI_GPC(14),  37  },
+            {   "PC15", SUNXI_GPC(15),  39  },
+            {   "PI6",  SUNXI_GPI(6),   4   },
+            {   "PI7",  SUNXI_GPI(7),   6   },
+            {   "PI8",  SUNXI_GPI(8),   8   },
+            {   "PI9",  SUNXI_GPI(9),   10  },
+            {   "PI4",  SUNXI_GPI(4),   12  },
+            {   "PI5",  SUNXI_GPI(5),   14  },
+            {   "PC16", SUNXI_GPC(16),  16  },
+            {   "PC17", SUNXI_GPC(17),  18  },
+            {   "PC18", SUNXI_GPC(18),  20  },
+            {   "PC23", SUNXI_GPC(23),  22  },
+            {   "PC24", SUNXI_GPC(24),  24  },
+            {   "PC7",  SUNXI_GPC(7),   26  },
+            {   "PC6",  SUNXI_GPC(6),   28  },
+            {   "PC5",  SUNXI_GPC(5),   30  },
+            {   "PC3",  SUNXI_GPC(3),   32  },
+            {   "PC2",  SUNXI_GPC(2),   34  },
+            {   "PC1",  SUNXI_GPC(1),   36  },
+            {   "PC0",  SUNXI_GPC(0),   38  },
+            {   "PC4",  SUNXI_GPC(4),   40  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+};
+
+
+
+#endif

recipes-devtools/python/pya20_0.2.12.bb

@@ -0,0 +1,23 @@
+DESCRIPTION = "A module to control Allwinner GPIO,SPI and I2C channels"
+HOMEPAGE = "https://pypi.python.org/pypi/pyA20"
+SECTION = "devel/python"
+LICENSE = "GPL-3.0-only"
+LIC_FILES_CHKSUM = "file://PKG-INFO;md5=4e584373bb0f46ef1e423cb7df37847d"
+DEPENDS = "python3"
+
+# No GPIO mappings for other machines yet
+COMPATIBLE_MACHINE = "(olinuxino-a13|olinuxino-a10|olinuxino-a20|olinuxino-a10lime|olinuxino-a20lime|olinuxino-a20lime2|olinuxino-a13som|olinuxino-a20som)"
+
+SRC_URI = "https://pypi.python.org/packages/source/p/pyA20/pyA20-${PV}.tar.gz \
+           file://mapping.h \
+          "
+S = "${WORKDIR}/pyA20-${PV}"
+
+inherit distutils3
+
+do_compile:prepend() { 
+cp ${WORKDIR}/mapping.h ${S}/pyA20/gpio/mapping.h
+}
+
+SRC_URI[md5sum] = "cab03b4931199804603d1074f6d8f48f"
+SRC_URI[sha256sum] = "4bef559a9c5a4d648d9834bad996cf2805b20d6063b8051029ffdf9deda2b536"

recipes-graphics/libgles/sunxi-mali/0001-Add-EGLSyncKHR-EGLTimeKHR-and-GLChar-definition.patch

@@ -0,0 +1,47 @@
+From fcdde5440976bb2c204789e13313c4d77cb263b7 Mon Sep 17 00:00:00 2001
+From: Nicolas Aguirre <aguirre.nicolas@gmail.com>
+Date: Tue, 16 Jun 2015 23:06:29 +0200
+Subject: [PATCH] Add EGLSyncKHR EGLTimeKHR and GLChar definition
+
+---
+ include/EGL/eglext.h | 4 +++-
+ include/GLES2/gl2.h  | 1 +
+ 2 files changed, 4 insertions(+), 1 deletion(-)
+
+diff --git a/include/EGL/eglext.h b/include/EGL/eglext.h
+index 25cfcb8..ec482d8 100644
+--- a/include/EGL/eglext.h
++++ b/include/EGL/eglext.h
+@@ -36,7 +36,6 @@ extern "C" {
+ /* Current version at http://www.khronos.org/registry/egl/ */
+ /* $Revision: 7244 $ on $Date: 2009-01-20 17:06:59 -0800 (Tue, 20 Jan 2009) $ */
+ #define EGL_EGLEXT_VERSION 3
+-
+ #ifndef EGL_KHR_config_attribs
+ #define EGL_KHR_config_attribs 1
+ #define EGL_CONFORMANT_KHR			0x3042	/* EGLConfig attribute */
+@@ -44,6 +43,9 @@ extern "C" {
+ #define EGL_VG_ALPHA_FORMAT_PRE_BIT_KHR		0x0040	/* EGL_SURFACE_TYPE bitfield */
+ #endif
+ 
++typedef void *EGLSyncKHR;
++typedef uint64_t EGLTimeKHR;
++
+ #ifndef EGL_KHR_lock_surface
+ #define EGL_KHR_lock_surface 1
+ #define EGL_READ_SURFACE_BIT_KHR		0x0001	/* EGL_LOCK_USAGE_HINT_KHR bitfield */
+diff --git a/include/GLES2/gl2.h b/include/GLES2/gl2.h
+index 59e376c..90d96bb 100644
+--- a/include/GLES2/gl2.h
++++ b/include/GLES2/gl2.h
+@@ -32,6 +32,7 @@ typedef unsigned int     GLuint;
+ typedef khronos_float_t  GLfloat;
+ typedef khronos_float_t  GLclampf;
+ typedef khronos_int32_t  GLfixed;
++typedef char             GLchar;
+ 
+ /* GL types for handling large vertex buffer objects */
+ typedef khronos_intptr_t GLintptr;
+-- 
+1.9.1
+

recipes-graphics/libgles/sunxi-mali/0001-fix-test-build.patch

@@ -0,0 +1,28 @@
+From 054886253f4f559b351a94e1e6ebfd5eb504461f Mon Sep 17 00:00:00 2001
+From: Trevor Woerner <twoerner@gmail.com>
+Date: Thu, 24 Sep 2015 23:38:11 -0400
+Subject: [PATCH] fix test build
+
+Allow the test application to build and link successfully.
+
+Signed-off-by: Trevor Woerner <twoerner@gmail.com>
+---
+ test/Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/test/Makefile b/test/Makefile
+index 700416e..51481c9 100644
+--- a/test/Makefile
++++ b/test/Makefile
+@@ -5,7 +5,7 @@ CFLAGS ?= -Wall
+ all: test
+ 
+ test: ../config.mk test.c
+-	$(CC) $(CFLAGS) -o $@ test.c -lEGL -lGLESv2
++	$(CC) $(CFLAGS) -I../include -L../../image/usr/lib -o $@ test.c -lEGL -lGLESv2 -lX11
+ 
+ clean:
+ 	rm -f test
+-- 
+2.6.0.rc3
+

recipes-graphics/libgles/sunxi-mali/0002-Add-missing-GLchar-definition.patch

@@ -0,0 +1,136 @@
+From 15d91ef25234ff402f4288273989693f2d402d9d Mon Sep 17 00:00:00 2001
+From: Raoul Hecky <raoul.hecky@gmail.com>
+Date: Fri, 10 Jan 2014 14:44:53 +0100
+Subject: [PATCH] Add missing GLchar definition, some gl/gles apps needs that
+ to compile correctly
+
+Build pkg-config files for gles and egl and install them
+
+Fix .pc creation
+
+add correct driver version in .pc
+---
+ .gitignore          |  1 +
+ Makefile            |  1 +
+ Makefile.pc         | 21 +++++++++++++++++++++
+ egl.pc.in           | 11 +++++++++++
+ gles_cm.pc.in       | 11 +++++++++++
+ glesv2.pc.in        | 11 +++++++++++
+ include/GLES/gl.h   |  1 +
+ include/GLES2/gl2.h |  1 +
+ 8 files changed, 58 insertions(+)
+ create mode 100644 Makefile.pc
+ create mode 100644 egl.pc.in
+ create mode 100644 gles_cm.pc.in
+ create mode 100644 glesv2.pc.in
+
+diff --git a/.gitignore b/.gitignore
+index 6865abf..e8a3713 100644
+--- a/.gitignore
++++ b/.gitignore
+@@ -1,2 +1,3 @@
+ config.mk
+ *~
++*.pc
+diff --git a/Makefile b/Makefile
+index 60d4a0f..94845ea 100644
+--- a/Makefile
++++ b/Makefile
+@@ -21,6 +21,7 @@ clean:
+ install: config.mk
+ 	$(MAKE) -C lib install
+ 	$(MAKE) -C include install
++	$(MAKE) -f Makefile.pc
+ 
+ test: config.mk
+ 	$(MAKE) -C test test
+diff --git a/Makefile.pc b/Makefile.pc
+new file mode 100644
+index 0000000..01097fd
+--- /dev/null
++++ b/Makefile.pc
+@@ -0,0 +1,21 @@
++include Makefile.setup
++include config.mk
++
++all:
++	echo "prefix=$(prefix)" > egl.pc
++	cat egl.pc.in >> egl.pc
++	sed -i "s/MVERSION/$MALI_VERSION/g" egl.pc
++	echo "prefix=$(prefix)" > gles_cm.pc
++	cat gles_cm.pc.in >> gles_cm.pc
++	sed -i "s/MVERSION/$MALI_VERSION/g" gles_cm.pc
++	echo "prefix=$(prefix)" > glesv2.pc
++	cat glesv2.pc.in >> glesv2.pc
++	sed -i "s/MVERSION/$MALI_VERSION/g" glesv2.pc
++
++install: egl.pc gles_cm.pc glesv2.pc
++	$(MKDIR) $(libdir)/pkgconfig
++	$(INSTALL_DATA) $^ $(libdir)/pkgconfig
++
++clean:
++	$(RM) egl.pc gles_cm.pc glesv2.pc
++
+diff --git a/egl.pc.in b/egl.pc.in
+new file mode 100644
+index 0000000..0697183
+--- /dev/null
++++ b/egl.pc.in
+@@ -0,0 +1,11 @@
++exec_prefix=${prefix}
++libdir=${prefix}/lib
++includedir=${prefix}/include
++
++Name: egl
++Description: Mali EGL library
++Requires.private:
++Version: MVERSION
++Libs: -L${libdir} -lEGL
++Libs.private: -lm -lpthread -ldl
++Cflags: -I${includedir}
+diff --git a/gles_cm.pc.in b/gles_cm.pc.in
+new file mode 100644
+index 0000000..22bc348
+--- /dev/null
++++ b/gles_cm.pc.in
+@@ -0,0 +1,11 @@
++exec_prefix=${prefix}
++libdir=${prefix}/lib
++includedir=${prefix}/include
++
++Name: gles_cm
++Description: Mali OpenGL ES 1.1 CM library
++Requires.private:
++Version: MVERSION
++Libs: -L${libdir} -lGLES_CM
++Libs.private: -lm -lpthread -ldl
++Cflags: -I${includedir}
+diff --git a/glesv2.pc.in b/glesv2.pc.in
+new file mode 100644
+index 0000000..efef2ed
+--- /dev/null
++++ b/glesv2.pc.in
+@@ -0,0 +1,11 @@
++exec_prefix=${prefix}
++libdir=${prefix}/lib
++includedir=${prefix}/include
++
++Name: glesv2
++Description: Mali OpenGL ES 2.0 library
++Requires.private:
++Version: MVERSION
++Libs: -L${libdir} -lGLESv2
++Libs.private: -lm -lpthread -ldl
++Cflags: -I${includedir}
+diff --git a/include/GLES/gl.h b/include/GLES/gl.h
+index 858f394..a6bb591 100644
+--- a/include/GLES/gl.h
++++ b/include/GLES/gl.h
+@@ -29,6 +29,7 @@ typedef float  GLfloat;
+ typedef float  GLclampf;
+ typedef signed int  GLfixed;
+ typedef signed int  GLclampx;
++typedef char GLchar;
+ 
+ typedef int * GLintptr;
+ typedef int *  GLsizeiptr;

recipes-graphics/libgles/sunxi-mali/0003-Fix-sed-to-replace-by-the-correct-var.patch

@@ -0,0 +1,30 @@
+From 95bbd40135f96b473d4c713317e485d0049580cd Mon Sep 17 00:00:00 2001
+From: Raoul Hecky <raoul.hecky@gmail.com>
+Date: Tue, 8 Apr 2014 08:10:12 +0200
+Subject: [PATCH] Fix sed to replace by the correct var
+
+---
+ Makefile.pc | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/Makefile.pc b/Makefile.pc
+index 01097fd..c51d18c 100644
+--- a/Makefile.pc
++++ b/Makefile.pc
+@@ -4,13 +4,13 @@ include config.mk
+ all:
+ 	echo "prefix=$(prefix)" > egl.pc
+ 	cat egl.pc.in >> egl.pc
+-	sed -i "s/MVERSION/$MALI_VERSION/g" egl.pc
++	sed -i "s/MVERSION/${MALI_VERSION}/g" egl.pc
+ 	echo "prefix=$(prefix)" > gles_cm.pc
+ 	cat gles_cm.pc.in >> gles_cm.pc
+-	sed -i "s/MVERSION/$MALI_VERSION/g" gles_cm.pc
++	sed -i "s/MVERSION/${MALI_VERSION}/g" gles_cm.pc
+ 	echo "prefix=$(prefix)" > glesv2.pc
+ 	cat glesv2.pc.in >> glesv2.pc
+-	sed -i "s/MVERSION/$MALI_VERSION/g" glesv2.pc
++	sed -i "s/MVERSION/${MALI_VERSION}/g" glesv2.pc
+ 
+ install: egl.pc gles_cm.pc glesv2.pc
+ 	$(MKDIR) $(libdir)/pkgconfig

recipes-graphics/libgles/sunxi-mali_git.bb

@@ -3,76 +3,102 @@ DESCRIPTION = "libGLES for the A10/A13 Allwinner processor with Mali 400 (X11)"
 LICENSE = "Proprietary"
 LIC_FILES_CHKSUM = "file://README;md5=1b81a178e80ee888ee4571772699ab2c"
 
-COMPATIBLE_MACHINE = "(mele|meleg|cubieboard|cubieboard2|cubietruck|olinuxino-a10|olinuxino-a13|olinuxino-a20)"
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i)"
 
 # These libraries shouldn't get installed in world builds unless something
 # explicitly depends upon them.
 EXCLUDE_FROM_WORLD = "1"
 PROVIDES = "virtual/libgles1 virtual/libgles2 virtual/egl"
 
-inherit distro_features_check
-REQUIRED_DISTRO_FEATURES = "opengl"
+# There's only hardfp version available
+python __anonymous() {
+    tunes = d.getVar("TUNE_FEATURES", True)
+    if not tunes:
+        return
+    if "callconvention-hard" not in tunes:
+        pkgn = d.getVar("PN", True)
+        pkgv = d.getVar("PV", True)
+        raise bb.parse.SkipPackage("%s-%s ONLY supports hardfp mode for now" % (pkgn, pkgv))
+}
 
-SRCREV_pn-${PN} = "95bbd40135f96b473d4c713317e485d0049580cd"
-SRC_URI = "gitsm://github.com/raoulh/sunxi-mali.git"
+SRCREV = "d343311efc8db166d8371b28494f0f27b6a58724"
+SRC_URI = "git://github.com/linux-sunxi/sunxi-mali.git;protocol=https;branch=master \
+           file://0001-Add-EGLSyncKHR-EGLTimeKHR-and-GLChar-definition.patch \
+           file://0002-Add-missing-GLchar-definition.patch \
+           file://0003-Fix-sed-to-replace-by-the-correct-var.patch \
+           file://0001-fix-test-build.patch \
+           "
 
 S = "${WORKDIR}/git"
 
-DEPENDS = "libdrm dri2proto libump"
+DEPENDS = "libdrm xorgproto libump patchelf-native"
 
-PACKAGECONFIG ??= "${@base_contains('DISTRO_FEATURES', 'x11', 'x11', '', d)} ${@base_contains('DISTRO_FEATURES', 'wayland', 'wayland', '', d)}"
+PACKAGECONFIG ??= "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11', '', d)} ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland', '', d)}"
 PACKAGECONFIG[wayland] = "EGL_TYPE=framebuffer,,,"
 PACKAGECONFIG[x11] = "EGL_TYPE=x11,,virtual/libx11 libxau libxdmcp libdri2,"
 
+# Inhibit warnings about files being stripped, we can't do anything about it.
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
+INHIBIT_PACKAGE_STRIP = "1"
+INHIBIT_SYSROOT_STRIP = "1"
 
 do_configure() {
-         DESTDIR=${D}/ VERSION=r3p0 ABI=armhf ${EXTRA_OECONF} make config
+         DESTDIR=${D}/ VERSION=r3p0 ABI=armhf make ${EXTRA_OEMAKE} config
 }
 
 do_install() {
-
     make -f Makefile.pc
 
     # install headers
-    install -d -m 0755                                ${D}${includedir}/EGL
-    install -m 0755 ${S}/include/EGL/*.h              ${D}${includedir}/EGL/
-    install -d -m 0755                                ${D}${includedir}/GLES
-    install -m 0755 ${S}/include/GLES/*.h             ${D}${includedir}/GLES/
-    install -d -m 0755                                ${D}${includedir}/GLES2
-    install -m 0755 ${S}/include/GLES2/*.h            ${D}${includedir}/GLES2/
-    install -d -m 0755                                ${D}${includedir}/KHR
-    install -m 0755 ${S}/include/KHR/*.h              ${D}${includedir}/KHR/
+    install -d -m 0755 ${D}${includedir}/EGL
+    install -m 0755 ${S}/include/EGL/*.h ${D}${includedir}/EGL/
+    install -d -m 0755 ${D}${includedir}/GLES
+    install -m 0755 ${S}/include/GLES/*.h ${D}${includedir}/GLES/
+    install -d -m 0755 ${D}${includedir}/GLES2
+    install -m 0755 ${S}/include/GLES2/*.h ${D}${includedir}/GLES2/
+    install -d -m 0755 ${D}${includedir}/KHR
+    install -m 0755 ${S}/include/KHR/*.h ${D}${includedir}/KHR/
 
     # Copy the .pc files
-    install -d -m 0755                                ${D}${libdir}/pkgconfig
-    install -m 0644  ${S}/egl.pc                      ${D}${libdir}/pkgconfig/
-    install -m 0644  ${S}/gles_cm.pc                  ${D}${libdir}/pkgconfig/
-    install -m 0644  ${S}/glesv2.pc                   ${D}${libdir}/pkgconfig/
+    install -d -m 0755 ${D}${libdir}/pkgconfig
+    install -m 0644 ${S}/egl.pc ${D}${libdir}/pkgconfig/
+    install -m 0644 ${S}/gles_cm.pc ${D}${libdir}/pkgconfig/
+    install -m 0644 ${S}/glesv2.pc ${D}${libdir}/pkgconfig/
 
     install -d ${D}${libdir}
     install -d ${D}${includedir}
-    
+
     make libdir=${D}${libdir}/ includedir=${D}${includedir}/ install
     make libdir=${D}${libdir}/ includedir=${D}${includedir}/ install -C include
+    rm -f ${D}${includedir}/KHR/khrplatform.h
 
     # Fix .so name and create symlinks, binary package provides .so wich can't be included directly in package without triggering the 'dev-so' QA check
     # Packages like xf86-video-fbturbo dlopen() libUMP.so, so we do need to ship the .so files in ${PN}
 
     mv ${D}${libdir}/libMali.so ${D}${libdir}/libMali.so.3
+    patchelf --set-soname libMali.so.3 ${D}${libdir}/libMali.so.3
     ln -sf libMali.so.3 ${D}${libdir}/libMali.so
-    ln -sf libUMP.so.3 ${D}${libdir}/libUMP.so
 
     for flib in libEGL.so.1.4 libGLESv1_CM.so.1.1 libGLESv2.so.2.0 ; do
         rm ${D}${libdir}/$flib
         ln -sf libMali.so.3 ${D}${libdir}/$flib
     done
+
+    DESTDIR=${D}/ VERSION=r3p0 ABI=armhf make ${EXTRA_OEMAKE} test
+    install -d ${D}${bindir}
+    install -m 0755 ${S}/test/test ${D}${bindir}/sunximali-test
 }
 
 # Packages like xf86-video-fbturbo dlopen() libUMP.so, so we do need to ship the .so files in ${PN}
-FILES_${PN} += "${libdir}/lib*.so"
-FILES_${PN}-dev = "${includedir} ${libdir}/pkgconfig/*"
-# These are closed binaries generated elsewhere so don't check ldflags & text relocations
-INSANE_SKIP_${PN} = "dev-so ldflags textrel split-strip"
+PACKAGES =+ "${PN}-test"
 
-# Inhibit warnings about files being stripped, we can't do anything about it.
-INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
+RPROVIDES:${PN} += "libGLESv2.so libEGL.so libGLESv2.so libGLESv1_CM.so libMali.so"
+RDEPENDS:${PN}-test = "${PN}"
+
+FILES:${PN} += "${libdir}/lib*.so"
+FILES:${PN}-dev = "${includedir} ${libdir}/pkgconfig/*"
+FILES:${PN}-test = "${bindir}/sunximali-test"
+
+# These are closed binaries generated elsewhere so don't check ldflags & text relocations
+INSANE_SKIP:${PN} = "dev-so ldflags textrel"
+INSANE_SKIP:${PN}-test = "dev-so ldflags textrel"

recipes-graphics/libump/libump_git.bb

@@ -1,14 +1,14 @@
 DESCRIPTION = "Unified Memory Provider userspace API source code needed for xf86-video-mali compilation"
 
-LICENSE = "Apache-2"
+LICENSE = "Apache-2.0"
 LIC_FILES_CHKSUM = "file://debian/copyright;md5=edf7fb6071cae7ec80d537a05ee17198"
 
 inherit autotools
 
 PV = "r4p0-00rel0+git${SRCPV}"
-SRCREV_pn-${PN} = "ec0680628744f30b8fac35e41a7bd8e23e59c39f"
+SRCREV = "ec0680628744f30b8fac35e41a7bd8e23e59c39f"
 
-SRC_URI = "git://github.com/linux-sunxi/libump.git"
+SRC_URI = "git://github.com/linux-sunxi/libump.git;protocol=https;branch=master"
 
 S = "${WORKDIR}/git"
 

recipes-graphics/mesa/mesa-gl_%.bbappend

@@ -0,0 +1 @@
+PACKAGECONFIG:class-target = "opengl x11 gallium"

recipes-graphics/mesa/mesa_%.bbappend

@@ -0,0 +1,5 @@
+# Enable lima and panfrost Mesa drivers
+PACKAGECONFIG:append:use-mailine-graphics = " lima panfrost"
+# Enable KMS renderonly Mesa support
+# See https://cgit.freedesktop.org/mesa/mesa/commit/?id=2b780fe89300199f2334539aa1678e9b68f0434f
+GALLIUMDRIVERS:append:use-mailine-graphics = ",kmsro"

recipes-graphics/tslib/tslib/0001-Support-reading-coordinates-from-multitouch-devices.patch

@@ -1,79 +0,0 @@
-From c525c0b5d8eada982c99442454fcf7b8364e10b3 Mon Sep 17 00:00:00 2001
-From: Florian Boor <florian@kernelconcepts.de>
-Date: Fri, 1 Apr 2011 23:30:21 +0200
-Subject: [PATCH] Support reading coordinates from multitouch devices.
-
-Signed-off-by: Florian Boor <florian@kernelconcepts.de>
-Signed-off-by: Christopher Larson <kergoth@gmail.com>
----
- plugins/input-raw.c | 33 +++++++++++++++++++++++----------
- 1 file changed, 23 insertions(+), 10 deletions(-)
-
-diff --git a/plugins/input-raw.c b/plugins/input-raw.c
-index 4396eab..1e48505 100644
---- a/plugins/input-raw.c
-+++ b/plugins/input-raw.c
-@@ -40,6 +40,11 @@
- # define KEY_CNT (KEY_MAX+1)
- #endif
- 
-+#ifndef ABS_MT_POSITION_X
-+# define ABS_MT_POSITION_X       0x35    /* Center X ellipse position */
-+# define ABS_MT_POSITION_Y       0x36    /* Center Y ellipse position */
-+#endif
-+
- #include "tslib-private.h"
- 
- #define GRAB_EVENTS_WANTED	1
-@@ -160,16 +165,17 @@ static int ts_input_read(struct tslib_module_info *inf,
- 				}
- 				break;
- 			case EV_SYN:
--				/* Fill out a new complete event */
--				if (pen_up) {
--					samp->x = 0;
--					samp->y = 0;
--					samp->pressure = 0;
--					pen_up = 0;
--				} else {
--					samp->x = i->current_x;
--					samp->y = i->current_y;
--					samp->pressure = i->current_p;
-+				if (ev.code == SYN_REPORT) {
-+					/* Fill out a new complete event */
-+					if (pen_up) {
-+						samp->x = 0;
-+						samp->y = 0;
-+						samp->pressure = 0;
-+						pen_up = 0;
-+					} else {
-+						samp->x = i->current_x;
-+						samp->y = i->current_y;
-+						samp->pressure = i->current_p;
- 				}
- 				samp->tv = ev.time;
- 	#ifdef DEBUG
-@@ -179,6 +185,7 @@ static int ts_input_read(struct tslib_module_info *inf,
- 	#endif /* DEBUG */
- 				samp++;
- 				total++;
-+				}
- 				break;
- 			case EV_ABS:
- 				switch (ev.code) {
-@@ -188,6 +195,12 @@ static int ts_input_read(struct tslib_module_info *inf,
- 				case ABS_Y:
- 					i->current_y = ev.value;
- 					break;
-+				case ABS_MT_POSITION_X:
-+					i->current_x = ev.value;
-+					break;
-+				case ABS_MT_POSITION_Y:
-+					i->current_y = ev.value;
-+					break;
- 				case ABS_PRESSURE:
- 					i->current_p = ev.value;
- 					break;
--- 
-1.8.1.4
-

recipes-graphics/tslib/tslib_1.1.bbappend

@@ -1,4 +0,0 @@
-FILESEXTRAPATHS := "${THISDIR}/${PN}"
-
-SRC_URI += "file://tslib.patch"
-

recipes-graphics/tslib/tslib_1.1.bbappend.disabled

@@ -0,0 +1,4 @@
+FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
+
+SRC_URI += "file://tslib.patch"
+

recipes-graphics/xorg-xserver/libdri2_git.bb

@@ -1,15 +1,15 @@
 DESCRIPTION = "Library for the DRI2 extension to the X Window System"
 
-LICENSE = "MIT-X"
+LICENSE = "MIT-CMU"
 LIC_FILES_CHKSUM = "file://COPYING;md5=827da9afab1f727f2a66574629e0f39c"
 
-DEPENDS = "libdrm libxext xextproto libxfixes dri2proto"
+DEPENDS = "libdrm libxext libxfixes xorgproto"
 
 PE = "1"
 PV = "1.0.0+git${SRCPV}"
 SRC_URI = "git://github.com/robclark/libdri2.git;protocol=http;branch=master"
 
-SRCREV_pn-${PN} = "4f1eef3183df2b270c3d5cbef07343ee5127a6a4"
+SRCREV = "4f1eef3183df2b270c3d5cbef07343ee5127a6a4"
 
 S = "${WORKDIR}/git"
 

recipes-graphics/xorg-xserver/xf86-video-fbturbo_git.bb

@@ -2,14 +2,14 @@ require recipes-graphics/xorg-driver/xorg-driver-video.inc
 
 DESCRIPTION = "X.Org X server -- A10/A13 display driver"
 
-LICENSE = "MIT-X"
+LICENSE = "MIT-CMU"
 LIC_FILES_CHKSUM = "file://COPYING;md5=f91dc3ee5ce59eb4b528e67e98a31266"
 
-DEPENDS += "sunxi-mali"
+DEPENDS += "sunxi-mali libump xorgproto"
 
 PE = "3"
-PV = "0.3.1+git${SRCPV}"
-SRCREV_pn-${PN} = "eed17d5586c3b4dfcf0b5976e8b947b171d4897c"
+PV = "0.5.1+git${SRCPV}"
+SRCREV = "e094e3c8f9004ca3347694bd05b99d136e8621b9"
 
 SRC_URI = "git://github.com/ssvb/xf86-video-fbturbo.git;protocol=http;branch=master \
            file://20-fbturbo.conf"
@@ -18,9 +18,9 @@ S = "${WORKDIR}/git"
 
 CFLAGS += " -I${STAGING_INCDIR}/xorg "
 
-do_install_append() {
+do_install:append() {
     install -d ${D}${datadir}/X11/xorg.conf.d
     install -m 0644 ${WORKDIR}/20-fbturbo.conf ${D}${datadir}/X11/xorg.conf.d
 }
 
-FILES_${PN} += "${datadir}/X11/xorg.conf.d/20-fbturbo.conf"
+FILES:${PN} += "${datadir}/X11/xorg.conf.d/20-fbturbo.conf"

recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend

@@ -1 +1 @@
-FILESEXTRAPATHS := "${THISDIR}/${PN}"
+FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"

recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend

@@ -0,0 +1 @@
+DEPENDS += "libxshmfence"