Merge pull request #241 from nandra/sumo-backports

Add kernel build fix + wifi support to sumo

README.md

@@ -31,7 +31,7 @@ If you want to switch back to sunxi versions for some reasons (no device tree av
 
 If you already have built the mainline versions it might be necessary to reset the build directories with:
 
-	bitbake -c clean linux u-boot
+	bitbake -c clean virtual/kernel virtual/bootloader
 
 Performance
 ===========

conf/layer.conf

@@ -7,3 +7,4 @@ BBFILES += "${LAYERDIR}/recipes*/*/*.bb ${LAYERDIR}/recipes*/*/*.bbappend"
 BBFILE_COLLECTIONS += "meta-sunxi"
 BBFILE_PATTERN_meta-sunxi := "^${LAYERDIR}/"
 BBFILE_PRIORITY_meta-sunxi = "10"
+LAYERSERIES_COMPAT_meta-sunxi = "morty pyro rocko sumo thud"

conf/machine/nanopi-neo-air.conf

@@ -5,7 +5,7 @@
 
 require conf/machine/include/sun8i.inc
 
-PREFERRED_VERSION_u-boot = "v2017.11%"
+PREFERRED_VERSION_u-boot = "v2018.03%"
 
 KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo-air.dtb"
 UBOOT_MACHINE = "nanopi_neo_air_defconfig"

conf/machine/nanopi-neo-plus2.conf

@@ -0,0 +1,11 @@
+#@TYPE: Machine
+#@NAME: nanopi-neo-plus2
+#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo Plus2, based
+# on the Allwinner H5 SoC.
+
+require conf/machine/include/sun50i.inc
+
+PREFERRED_VERSION_u-boot = "v2018.03%"
+
+KERNEL_DEVICETREE = "allwinner/sun50i-h5-nanopi-neo-plus2.dtb"
+UBOOT_MACHINE = "nanopi_neo_plus2_defconfig"

conf/machine/nanopi-neo.conf

@@ -4,7 +4,7 @@
 
 require conf/machine/include/sun8i.inc
 
-PREFERRED_VERSION_u-boot = "v2017.11%"
+PREFERRED_VERSION_u-boot = "v2018.03%"
 
 KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo.dtb"
 UBOOT_MACHINE = "nanopi_neo_defconfig"

conf/machine/nanopi-neo2.conf

@@ -0,0 +1,11 @@
+#@TYPE: Machine
+#@NAME: nanopi-neo2
+#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo 2, based on
+# the Allwinner H5 SoC.
+
+require conf/machine/include/sun50i.inc
+
+PREFERRED_VERSION_u-boot = "v2018.03%"
+
+KERNEL_DEVICETREE = "allwinner/sun50i-h5-nanopi-neo2.dtb"
+UBOOT_MACHINE = "nanopi_neo2_defconfig"

conf/machine/orange-pi-one.conf

@@ -4,7 +4,7 @@
 
 require conf/machine/include/sun8i.inc
 
-PREFERRED_VERSION_u-boot = "v2017.11%"
+PREFERRED_VERSION_u-boot = "v2018.03%"
 
 KERNEL_DEVICETREE = "sun8i-h3-orangepi-one.dtb"
 UBOOT_MACHINE = "orangepi_one_defconfig"

conf/machine/orange-pi-pc-plus.conf

@@ -4,7 +4,7 @@
 
 require conf/machine/include/sun8i.inc
 
-PREFERRED_VERSION_u-boot = "v2017.03%"
+PREFERRED_VERSION_u-boot = "v2018.03%"
 
 KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc-plus.dtb"
 UBOOT_MACHINE = "orangepi_pc_plus_defconfig"

conf/machine/orange-pi-pc.conf

@@ -4,7 +4,7 @@
 
 require conf/machine/include/sun8i.inc
 
-PREFERRED_VERSION_u-boot = "v2017.11%"
+PREFERRED_VERSION_u-boot = "v2018.03%"
 
 KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc.dtb"
 UBOOT_MACHINE = "orangepi_pc_defconfig"

conf/machine/orange-pi-zero-plus2.conf

@@ -5,7 +5,7 @@
 
 require conf/machine/include/sun50i.inc
 
-PREFERRED_VERSION_u-boot = "v2017.11%"
+PREFERRED_VERSION_u-boot = "v2018.03%"
 
 KERNEL_DEVICETREE = "allwinner/sun50i-h5-orangepi-zero-plus2.dtb"
 UBOOT_MACHINE = "orangepi_zero_plus2_defconfig"

conf/machine/orange-pi-zero.conf

@@ -4,7 +4,7 @@
 
 require conf/machine/include/sun8i.inc
 
-PREFERRED_VERSION_u-boot = "v2017.11%"
+PREFERRED_VERSION_u-boot = "v2018.03%"
 
 KERNEL_DEVICETREE = "sun8i-h2-plus-orangepi-zero.dtb"
 UBOOT_MACHINE = "orangepi_zero_defconfig"

conf/machine/pcduino.conf

@@ -4,7 +4,7 @@
 
 require conf/machine/include/sun4i.inc
 
-PREFERRED_VERSION_u-boot = "v2017.11%"
+PREFERRED_VERSION_u-boot = "v2018.03%"
 
 KERNEL_DEVICETREE = "sun4i-a10-pcduino.dtb"
 UBOOT_MACHINE = "Linksprite_pcDuino_defconfig"

recipes-bsp/u-boot/files/0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch

@@ -0,0 +1,26 @@
+From f4a77da23b3890b53efab6a927cbe99b76ef3b26 Mon Sep 17 00:00:00 2001
+From: Florin Sarbu <florin@resin.io>
+Date: Wed, 12 Sep 2018 14:22:49 +0200
+Subject: [PATCH] nanopi_neo_air_defconfig: Enable eMMC support
+
+Upstream-status: Pending
+Signed-off-by: Florin Sarbu <florin@resin.io>
+---
+ configs/nanopi_neo_air_defconfig | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/configs/nanopi_neo_air_defconfig b/configs/nanopi_neo_air_defconfig
+index ca9c2dd..74ce044 100644
+--- a/configs/nanopi_neo_air_defconfig
++++ b/configs/nanopi_neo_air_defconfig
+@@ -10,6 +10,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-neo-air"
+ # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+ CONFIG_CONSOLE_MUX=y
+ CONFIG_SPL=y
++CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+ # CONFIG_CMD_FLASH is not set
+ # CONFIG_SPL_DOS_PARTITION is not set
+ # CONFIG_SPL_ISO_PARTITION is not set
+-- 
+2.7.4
+

recipes-bsp/u-boot/files/u-boot-pylibfdt-native-build.patch

@@ -1,12 +1,16 @@
-diff --git a/tools/Makefile b/tools/Makefile
-index 5db2a54..54bd224 100644
---- a/tools/Makefile
-+++ b/tools/Makefile
-@@ -134,6 +134,7 @@ tools/_libfdt.so: $(LIBFDT_SRCS) $(LIBFDT_SWIG)
- 	$(Q)unset CC; \
- 	unset CROSS_COMPILE; \
- 	LDFLAGS="$(HOSTLDFLAGS)" CFLAGS= VERSION="u-boot-$(UBOOTVERSION)" \
-+		CC="$(HOSTCC)" LDSHARED="$(HOSTLDSHARED)" \
- 		CPPFLAGS="$(_hostc_flags)" OBJDIR=tools \
- 		SOURCES="$(LIBFDT_SRCS) tools/libfdt.i" \
- 		SWIG_OPTS="-I$(srctree)/lib/libfdt -I$(srctree)/lib" \
+diff --git a/scripts/dtc/pylibfdt/Makefile b/scripts/dtc/pylibfdt/Makefile
+index 01d5e0ffe3..2b2dfe0bd9 100644
+--- a/scripts/dtc/pylibfdt/Makefile
++++ b/scripts/dtc/pylibfdt/Makefile
+@@ -15,6 +15,8 @@ PYLIBFDT_srcs = $(addprefix $(LIBFDT_srcdir)/,$(LIBFDT_SRCS)) \
+ 
+ quiet_cmd_pymod = PYMOD   $@
+       cmd_pymod = unset CC; unset CROSS_COMPILE; unset CFLAGS;\
++		CC="$(HOSTCC)" \
++		LDSHARED="$(HOSTLDSHARED)" \
+ 		LDFLAGS="$(HOSTLDFLAGS)" \
+ 		VERSION="u-boot-$(UBOOTVERSION)" \
+ 		CPPFLAGS="$(HOSTCFLAGS) -I$(LIBFDT_srcdir)" OBJDIR=$(obj) \
+-- 
+2.11.0
+

recipes-bsp/u-boot/u-boot_2018.03.bb

@@ -18,12 +18,13 @@ DEFAULT_PREFERENCE_sun50i="1"
 
 SRC_URI = "git://git.denx.de/u-boot.git;branch=master \
            file://u-boot-pylibfdt-native-build.patch \
+           file://0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch \
            file://boot.cmd \
            "
 
-SRCREV = "c253573f3e269fd9a24ee6684d87dd91106018a5"
+SRCREV = "f95ab1fb6e37f0601f397091bb011edf7a98b890"
 
-PV = "v2017.11+git${SRCPV}"
+PV = "v2018.03+git${SRCPV}"
 PE = "2"
 
 S = "${WORKDIR}/git"

recipes-kernel/linux/linux-mainline/0001-arm64-dts-orange-pi-zero-plus2-fix-sdcard-detect.patch

@@ -1,29 +0,0 @@
-From 1596e282f52c8f43fd1cc4a39096f28563558a5c Mon Sep 17 00:00:00 2001
-From: Sergey Matyukevich <geomatsi@gmail.com>
-Date: Fri, 3 Nov 2017 22:12:43 +0300
-Subject: [PATCH 1/2] arm64: dts: orange-pi-zero-plus2: fix sdcard detect
-
-The sdcard detect pin on orange-pi-zero-plus2 is pulled up.
-Fix cd-gpio description to enable sdcard detect.
-
-Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
----
- arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
-index b6b7a561df8c..a42fd79a62a3 100644
---- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
-@@ -71,7 +71,7 @@
- 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
- 	vmmc-supply = <&reg_vcc3v3>;
- 	bus-width = <4>;
--	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
-+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
- 	status = "okay";
- };
- 
--- 
-2.11.0
-

recipes-kernel/linux/linux-mainline/0002-arm64-dts-orange-pi-zero-plus2-enable-AP6212a-WiFi-B.patch

@@ -1,74 +0,0 @@
-From 4d470855525b5993e766ad9f9304482739ba918d Mon Sep 17 00:00:00 2001
-From: Sergey Matyukevich <geomatsi@gmail.com>
-Date: Fri, 3 Nov 2017 22:24:45 +0300
-Subject: [PATCH 2/2] arm64: dts: orange-pi-zero-plus2: enable AP6212a WiFi/BT
- combo
-
-Enable AP6212a WiFi/BT combo chip on orange-pi-zero-plus2 board:
-- WiFi SDIO interface is connected to MMC1
-- WiFi REG_ON pin connected to gpio PA9: attach to mmc-pwrseq
-- WiFi HOST_WAKE pin connected to gpio PL7
-- BT is connected to UART1
-
-Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
----
- .../allwinner/sun50i-h5-orangepi-zero-plus2.dts    | 32 ++++++++++++++++++++++
- 1 file changed, 32 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
-index a42fd79a62a3..d415b7b67cce 100644
---- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
-@@ -64,6 +64,13 @@
- 		regulator-min-microvolt = <3300000>;
- 		regulator-max-microvolt = <3300000>;
- 	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		pinctrl-names = "default";
-+		reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
-+		post-power-on-delay-ms = <200>;
-+	};
- };
- 
- &mmc0 {
-@@ -75,6 +82,25 @@
- 	status = "okay";
- };
- 
-+&mmc1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc1_pins_a>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	vqmmc-supply = <&reg_vcc3v3>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	brcmf: wifi@1 {
-+		reg = <1>;
-+		compatible = "brcm,bcm4329-fmac";
-+		interrupt-parent = <&r_pio>;
-+		interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>;	/* PL7 */
-+		interrupt-names = "host-wake";
-+	};
-+};
-+
- &mmc2 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc2_8bit_pins>;
-@@ -90,3 +116,9 @@
- 	pinctrl-0 = <&uart0_pins_a>;
- 	status = "okay";
- };
-+
-+&uart1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
-+	status = "okay";
-+};
--- 
-2.11.0
-

recipes-kernel/linux/linux-mainline/0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch

@@ -9,18 +9,22 @@ This patch was originally submitted by Jelle van der Waa. Martin Kelly
 modified it to compile on the latest kernel, fixed up some review
 comments from Maxime Ripard, and re-tested the patch.
 
+The patch has been reworked to add back eMMC support which has been left
+out at the last backport.
+
 Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
 Cc: linux-sunxi@googlegroups.com
 Cc: devicetree@vger.kernel.org
 Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
 Signed-off-by: Martin Kelly <mkelly@xevo.com>
 Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+Signed-off-by: Florin Sarbu <florin@resin.io>
 ---
- arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts | 24 ++++++++++++++++++++++++
- 1 file changed, 24 insertions(+)
+ arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts | 34 +++++++++++++++++++++++++++
+ 1 file changed, 34 insertions(+)
 
 diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
-index 03ff6f8b93ff..920849092cc8 100644
+index 03ff6f8..a9331fe 100644
 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
 +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
 @@ -72,6 +72,11 @@
@@ -35,7 +39,7 @@ index 03ff6f8b93ff..920849092cc8 100644
  };
  
  &mmc0 {
-@@ -84,6 +89,25 @@
+@@ -84,6 +89,35 @@
  	status = "okay";
  };
  
@@ -57,6 +61,16 @@ index 03ff6f8b93ff..920849092cc8 100644
 +		interrupt-names = "host-wake";
 +	};
 +};
++
++&mmc2 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc2_8bit_pins>;
++	vmmc-supply = <&reg_vcc3v3>;
++	vqmmc-supply = <&reg_vcc3v3>;
++	bus-width = <8>;
++	non-removable;
++	status = "okay";
++};
 +
  &uart0 {
  	pinctrl-names = "default";

recipes-kernel/linux/linux-mainline/aarch64/defconfig

@@ -431,6 +431,11 @@ CONFIG_USB_QCOM_8X16_PHY=y
 CONFIG_USB_ULPI=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_RENESAS_USBHS_UDC=m
+CONFIG_USB_MUSB_HDRC=y
+# Restrict to host mode, as it is hard-coded that way in the device tree
+# (dr_mode = "host" in the &usb_otg node)
+CONFIG_USB_MUSB_HOST=y
+CONFIG_USB_MUSB_SUNXI=y
 CONFIG_MMC=y
 CONFIG_MMC_BLOCK_MINORS=32
 CONFIG_MMC_ARMMMCI=y

recipes-kernel/linux/linux-mainline/orange-pi-zero/0001-add-wifi-support.patch

@@ -0,0 +1,79 @@
+diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+index 6713d0f2b3f4..ad0829e8f716 100644
+--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
++++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+@@ -80,19 +80,22 @@
+ 		};
+ 	};
+ 
+-	reg_vcc_wifi: reg_vcc_wifi {
++	vdd_wifi: vdd_wifi {
+ 		compatible = "regulator-fixed";
+-		regulator-min-microvolt = <3300000>;
+-		regulator-max-microvolt = <3300000>;
+-		regulator-name = "vcc-wifi";
+-		enable-active-high;
++		regulator-name = "wifi";
++		regulator-min-microvolt = <1800000>;
++		regulator-max-microvolt = <1800000>;
+ 		gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
++		startup-delay-us = <70000>;
++		enable-active-high;
+ 	};
+ 
+-	wifi_pwrseq: wifi_pwrseq {
++	pwrseq_wifi: pwrseq_wifi@0 {
+ 		compatible = "mmc-pwrseq-simple";
++		pinctrl-names = "default";
++		pinctrl-0 = <&wifi_rst>;
+ 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
+-		post-power-on-delay-ms = <200>;
++		post-power-on-delay-ms = <50>;
+ 	};
+ };
+ 
+@@ -124,9 +127,11 @@
+ &mmc1 {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&mmc1_pins_a>;
+-	vmmc-supply = <&reg_vcc_wifi>;
+-	mmc-pwrseq = <&wifi_pwrseq>;
++	vmmc-supply = <&reg_vcc3v3>;
++	vqmmc-supply = <&vdd_wifi>;
++	mmc-pwrseq = <&pwrseq_wifi>;
+ 	bus-width = <4>;
++	max-frequency = <16000000>;
+ 	non-removable;
+ 	status = "okay";
+ 
+@@ -136,9 +141,30 @@
+ 	 */
+ 	xr819: sdio_wifi@1 {
+ 		reg = <1>;
++		compatible = "xradio,xr819";
++		pinctrl-names = "default";
++		pinctrl-0 = <&wifi_wake>;
++		interrupt-parent = <&pio>;
++		interrupts = <6 10 IRQ_TYPE_EDGE_RISING>;
++		interrupt-names = "host-wake";
++		local-mac-address = [dc 44 6d c0 ff ee];
+ 	};
+ };
+ 
++&pio {
++	wifi_wake: wifi_wake {
++		pins = "PG10";
++		function = "gpio_in";
++    };
++};
++
++&r_pio {
++	wifi_rst: wifi_rst {
++		pins = "PL7";
++		function = "gpio_out";
++    };
++};
++
+ &mmc1_pins_a {
+ 	bias-pull-up;
+ };

recipes-kernel/linux/linux-mainline_4.16.13.bb

@@ -19,12 +19,14 @@ KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
 
 S = "${WORKDIR}/linux-${PV}"
 	
-SRC_URI[md5sum] = "e1051f6b15d6399a5de2441dd4e15537"
-SRC_URI[sha256sum] = "ffc393a0c66f80375eacd3fb177b92e5c9daa07de0dcf947e925e049352e6142"
+SRC_URI[md5sum] = "86f56f586f35ac3a98e086dccfd2ff99"
+SRC_URI[sha256sum] = "6f0a7b3abd48eca3df5e29bfbcfc1c06dd2792f86d23cdb9ad37cf3e572df2e3"
 
 SRC_URI = "https://www.kernel.org/pub/linux/kernel/v4.x/linux-${PV}.tar.xz \
-        file://0001-arm64-dts-orange-pi-zero-plus2-fix-sdcard-detect.patch \
-        file://0002-arm64-dts-orange-pi-zero-plus2-enable-AP6212a-WiFi-B.patch \
         file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
         file://defconfig \
         "
+
+SRC_URI_append_orange-pi-zero += "\
+	file://0001-add-wifi-support.patch \
+	"

recipes-kernel/linux/linux-mainline_git.bb

@@ -1,13 +1,15 @@
 SECTION = "kernel"
 DESCRIPTION = "Mainline Linux kernel"
 LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
-COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i)"
+LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
 
 inherit kernel
 
 require linux.inc
 
+# Since we're not using git, this doesn't make a difference, but we need to fill
+# in something or kernel-yocto.bbclass will fail.
 KBRANCH ?= "master"
 
 # Pull in the devicetree files into the rootfs
@@ -15,13 +17,13 @@ RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"
 
 # Default is to use stable kernel version
 # If you want to use latest git version set to "1"
-DEFAULT_PREFERENCE = "-1" 
+DEFAULT_PREFERENCE = "-1"
 
 KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
 	
-# 4.15-rc1
-PV = "4.15+git${SRCPV}"
-SRCREV_pn-${PN} = "4fbd8d194f06c8a3fd2af1ce560ddb31f7ec8323"
+# v4.17-rc7
+PV = "v4.17-rc7+git${SRCPV}"
+SRCREV_pn-${PN} = "b04e217704b7f879c6b91222b066983a44a7a09f"
 
 SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git;protocol=git;branch=master \
         file://defconfig \

recipes-kernel/linux/linux.inc

@@ -1,7 +1,6 @@
 DESCRIPTION = "Linux Kernel"
 SECTION = "kernel"
 LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
 
 INC_PR = "r0"
 
@@ -16,7 +15,7 @@ CMDLINE_DEBUG ?= "loglevel=3"
 
 # Kernel bootlogo is distro-specific (default is OE logo).
 # Logo resolution (qvga, vga, ...) is machine-specific.
-LOGO_SIZE ?= '${@base_conditional("MACHINE_GUI_CLASS", "bigscreen", "vga", "qvga", d)}'
+LOGO_SIZE ?= '${@oe.utils.conditional("MACHINE_GUI_CLASS", "bigscreen", "vga", "qvga", d)}'
 # To use this, add file://${LOGO_SIZE}/logo_linux_clut224.ppm.bz2 or similar
 # to your kernel recipe, and then structure your logos for each resolution
 # accordingly.
@@ -36,6 +35,10 @@ kernel_conf_variable() {
     fi
 }
 
+do_kernel_configme[depends] += "virtual/${TARGET_PREFIX}binutils:do_populate_sysroot"
+do_kernel_configme[depends] += "virtual/${TARGET_PREFIX}gcc:do_populate_sysroot"
+do_kernel_configme[depends] += "bc-native:do_populate_sysroot bison-native:do_populate_sysroot"
+
 do_configure_prepend() {
     CONF_SED_SCRIPT=""
 

recipes-kernel/xradio-firmware/xradio-firmware.bb

@@ -0,0 +1,25 @@
+DESCRIPTION = "Xradio xr819 WiFi firmware"
+LICENSE = "CC0-1.0"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/${LICENSE};md5=0ceb3372c9595f0a8067e55da801e4a1"
+
+PV = "1.0"
+PR = "r0"
+
+SRCREV = "8b4a4ed16f7f9d12e59ff2f9ceba3cc335374dbe"
+
+COMPATIBLE_MACHINE = "orange-pi-zero"
+
+SRC_URI = "git://github.com/armbian/build.git;protocol=https"
+
+S = "${WORKDIR}/git"
+
+do_install() {
+    install -d ${D}${base_libdir}/firmware/xr819
+    install -m 0644 ${S}/bin/firmware-overlay/xr819/boot_xr819.bin ${D}${base_libdir}/firmware/xr819/
+    install -m 0644 ${S}/bin/firmware-overlay/xr819/sdd_xr819.bin ${D}${base_libdir}/firmware/xr819/
+    install -m 0644 ${S}/bin/firmware-overlay/xr819/fw_xr819.bin ${D}${base_libdir}/firmware/xr819/
+}
+
+FILES_${PN} = "${base_libdir}/*"
+
+PACKAGES = "${PN}"

recipes-kernel/xradio/xradio.bb

@@ -0,0 +1,23 @@
+SUMMARY = "Xradio WiFi driver for orangepi-zero"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://LICENSE;md5=a23a74b3f4caf9616230789d94217acb"
+
+inherit module
+
+PV = "0.1"
+PR = "r0"
+
+RDEPENDS_${PN} += "xradio-firmware"
+
+COMPATIBLE_MACHINE = "orange-pi-zero"
+
+SRCREV = "d649e5a78efdc56ecd0951e35ca60db175650232"
+
+SRC_URI = "git://github.com/fifteenhex/xradio.git;protocol=https \
+          "
+
+S = "${WORKDIR}/git"
+
+EXTRA_OEMAKE += "-C ${STAGING_KERNEL_DIR} M=${S}"
+
+KERNEL_MODULE_AUTOLOAD += "xradio_wlan"