conf: added sunxi and sunxi64 machine overrides.

fixing missing 'compatible' property in reg_vcc_wifi node
linux: refresh orange-pi-zero wifi patch
2025-07-16 13:59:46 +02:00 · 2020-11-23 08:19:02 +01:00 · 2020-02-10 19:57:09 +01:00 · 2020-02-10 19:56:57 +01:00 · 2019-09-07 22:43:19 +02:00 · 2019-09-07 22:43:08 +02:00
78 changed files with 395 additions and 851 deletions
--- a/README.md
+++ b/README.md
@ -19,36 +19,24 @@ Maintainers:
 Kernel / U-Boot Version
 ===========
 Most Allwinner devices and hardware are supported in mainline kernel and U-Boot, so this layer builds mainline by default.
-
-Legacy sunxi Kernel / U-Boot
-----------
-
 There is a custom U-Boot and Kernel version for sunxi devices which includes some special drivers not mainlined.
-These versions are rather old (3.4 for kernel and 2014.04 for U-Boot), but may support more functions and devices than current mainline.
+These versions are rather old (3.4 for kernel and 2014.04 for U-Boot), but may support more functions and devices than current mainline

 If you want to switch back to sunxi versions for some reasons (no device tree available, unsupported hardware), either:
 - change the file conf/machine/include/sunxi.inc to include the following block
 - edit your conf/local.conf to add the following block

-		PREFERRED_PROVIDER_u-boot="u-boot-sunxi"
-		PREFERRED_PROVIDER_virtual/bootloader="u-boot-sunxi"
-		PREFERRED_PROVIDER_virtual/kernel="linux-sunxi"
-		KERNEL_DEVICETREE = ""
+	PREFERRED_PROVIDER_u-boot="u-boot-sunxi"
+	PREFERRED_PROVIDER_virtual/bootloader="u-boot-sunxi"
+	PREFERRED_PROVIDER_virtual/kernel="linux-sunxi"

 If you already have built the mainline versions it might be necessary to reset the build directories with:

 	bitbake -c clean virtual/kernel virtual/bootloader

-Mainline Kernel / U-Boot
-----------
-
-For mainline kernel we have now support for latest LTS and stable.
+For mainline kernel we have now support for latest LTS, stable and bleeding edge (latest possible rc).
 By default we use latest LTS. If you would like to change version please update ```PREFERRED_VERSION_linux-mainline``` in:
-* [conf/machine/include/sunxi.inc](https://github.com/linux-sunxi/meta-sunxi/blob/fa0846c0eb23e3424b89acb4d5a327e921f73497/conf/machine/include/sunxi.inc#L16)
-
-When using mainline kernel ≥ 5.2 it is now possible to use the mainline graphics drivers *lima* and *panfrost*, instead of the *mali* driver provided by ARM. To enable open source mainline graphics support add the following line in your `local.conf`:
-
-    MACHINEOVERRIDES .= ":use-mailine-graphics"
+* [conf/machine/include/sunxi.inc](https://github.com/linux-sunxi/meta-sunxi/blob/4921234ed77f9df77c65c88637ce50468f65bde7/conf/machine/include/sunxi.inc#L16)

 Performance
 ===========
--- a/classes/sdcard_image-sunxi.bbclass
+++ b/classes/sdcard_image-sunxi.bbclass
@ -13,14 +13,11 @@ inherit image_types
 #
 #

-# Use an uncompressed ext4 by default as rootfs
-SDIMG_ROOTFS_TYPE ?= "ext4"
-
 # This image depends on the rootfs image
-IMAGE_TYPEDEP:sunxi-sdimg = "${SDIMG_ROOTFS_TYPE}"
+IMAGE_TYPEDEP_sunxi-sdimg = "${SDIMG_ROOTFS_TYPE}"

 # Boot partition volume id
-BOOTDD_VOLUME_ID ?= "boot"
+BOOTDD_VOLUME_ID ?= "${MACHINE}"

 # Boot partition size [in KiB]
 BOOT_SPACE ?= "40960"
@ -28,6 +25,8 @@ BOOT_SPACE ?= "40960"
 # First partition begin at sector 2048 : 2048*1024 = 2097152
 IMAGE_ROOTFS_ALIGNMENT = "2048"

+# Use an uncompressed ext4 by default as rootfs
+SDIMG_ROOTFS_TYPE ?= "ext4"
 SDIMG_ROOTFS = "${IMGDEPLOYDIR}/${IMAGE_NAME}.rootfs.${SDIMG_ROOTFS_TYPE}"

 do_image_sunxi_sdimg[depends] += " \
@ -41,7 +40,7 @@ do_image_sunxi_sdimg[depends] += " \
 # SD card image name
 SDIMG = "${IMGDEPLOYDIR}/${IMAGE_NAME}.rootfs.sunxi-sdimg"

-IMAGE_CMD:sunxi-sdimg () {
+IMAGE_CMD_sunxi-sdimg () {

 	# Align partitions
 	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
@ -95,10 +94,6 @@ IMAGE_CMD:sunxi-sdimg () {
 	then
 		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/boot.scr ::boot.scr
 	fi
-        if [ -e "${DEPLOY_DIR_IMAGE}/splash.bmp" ]
-        then
-                mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/splash.bmp ::splash.bmp
-        fi


 	# Add stamp file
@ -121,7 +116,7 @@ IMAGE_CMD:sunxi-sdimg () {
 }

 # write uboot.itb for arm64 boards
-IMAGE_CMD_sunxi-sdimg:append:sun50i () {
+IMAGE_CMD_sunxi-sdimg_append_sun50i () {
 	if [ -e "${DEPLOY_DIR_IMAGE}/${UBOOT_BINARY}" ]
 	then
 		dd if=${DEPLOY_DIR_IMAGE}/${UBOOT_BINARY} of=${SDIMG} bs=1024 seek=40 conv=notrunc
--- a/conf/layer.conf
+++ b/conf/layer.conf
@ -12,6 +12,6 @@ BBFILE_PRIORITY_meta-sunxi = "10"
 # cause compatibility issues with other layers
 LAYERVERSION_meta-sunxi = "1"

-LAYERDEPENDS_meta-sunxi = "core"
+LAYERDEPENDS_meta-sunxi = "core openembedded-layer"

-LAYERSERIES_COMPAT_meta-sunxi = "honister"
+LAYERSERIES_COMPAT_meta-sunxi = "morty pyro rocko sumo thud warrior"
--- a/conf/machine/bananapi-m2m.conf
+++ b/conf/machine/bananapi-m2m.conf
@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: bananapi-m2m
-#@DESCRIPTION: Machine configuration for the Banana Pi M2M, base on Allwinner H8 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-r16-bananapi-m2m.dtb"
-UBOOT_MACHINE = "Bananapi_m2m_defconfig"
-
--- a/conf/machine/bananapi-m2plus.conf
+++ b/conf/machine/bananapi-m2plus.conf
@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: bananapi-m2plus
-#@DESCRIPTION: Machine configuration for the Banana Pi M2+, base on Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-bananapi-m2-plus.dtb"
-UBOOT_MACHINE = "bananapi_m2_plus_h3_defconfig"
-
--- a/conf/machine/bananapi-m64.conf
+++ b/conf/machine/bananapi-m64.conf
@ -1,8 +0,0 @@
-#@TYPE: Machine
-#@NAME: pine64-plus
-#@DESCRIPTION: Machine configuration for the pine64-plus, based on Allwinner A64 CPU
-
-require conf/machine/include/sun50i.inc
-
-KERNEL_DEVICETREE = "allwinner/sun50i-a64-bananapi-m64.dtb"
-UBOOT_MACHINE = "bananapi_m64_defconfig"
--- a/conf/machine/include/hardware/ap6212a.inc
+++ b/conf/machine/include/hardware/ap6212a.inc
@ -1,5 +0,0 @@
-# Include for boards with AMPAK 6212A Wifi / Bluetooth module
-# https://linux-sunxi.org/Wifi#Ampak
-
-MACHINE_EXTRA_RRECOMMENDS:append = " kernel-module-brcmfmac"
-MACHINE_EXTRA_RDEPENDS:append = " linux-firmware-bcm43430"
--- a/conf/machine/include/sun4i.inc
+++ b/conf/machine/include/sun4i.inc
@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/arm/armv7a/tune-cortexa8.inc
+require conf/machine/include/tune-cortexa8.inc

 SOC_FAMILY = "sun4i"
--- a/conf/machine/include/sun50i.inc
+++ b/conf/machine/include/sun50i.inc
@ -1,6 +1,4 @@
 require conf/machine/include/sunxi64.inc
-
-DEFAULTTUNE ?= "cortexa53-crypto"
-require conf/machine/include/arm/armv8a/tune-cortexa53.inc
+require conf/machine/include/arm/arch-armv8a.inc

 SOC_FAMILY = "sun50i"
--- a/conf/machine/include/sun5i.inc
+++ b/conf/machine/include/sun5i.inc
@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/arm/armv8a/tune-cortexa8.inc
+require conf/machine/include/tune-cortexa8.inc

 SOC_FAMILY = "sun5i"
--- a/conf/machine/include/sun7i.inc
+++ b/conf/machine/include/sun7i.inc
@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/arm/armv7a/tune-cortexa7.inc
+require conf/machine/include/tune-cortexa7.inc

 SOC_FAMILY = "sun7i"
--- a/conf/machine/include/sun8i.inc
+++ b/conf/machine/include/sun8i.inc
@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/arm/armv7a/tune-cortexa7.inc
+require conf/machine/include/tune-cortexa7.inc

 SOC_FAMILY = "sun8i"
--- a/conf/machine/include/sunxi-mali-driver.inc
+++ b/conf/machine/include/sunxi-mali-driver.inc
@ -1,15 +0,0 @@
-PREFERRED_PROVIDER_virtual/mesa ?= "mesa-gl"
-PREFERRED_PROVIDER_virtual/libgl ?= "mesa-gl"
-PREFERRED_PROVIDER_virtual/libgles1 ?= "sunxi-mali"
-PREFERRED_PROVIDER_virtual/libgles2 ?= "sunxi-mali"
-PREFERRED_PROVIDER_virtual/egl ?= "sunxi-mali"
-
-PACKAGECONFIG:remove:pn-xserver-xorg = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'glamor', '', d)}"
-
-XSERVER += "sunxi-mali \
-            sunxi-mali-dev"
-
-MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "\
- kernel-module-mali \
- kernel-module-mali-drm \
-  "
--- a/conf/machine/include/sunxi-mali.inc
+++ b/conf/machine/include/sunxi-mali.inc
@ -1,5 +1,15 @@
-# The "sunxi-mailine-graphics-drivers.inc" doesn't exist, but it can be created
-# in the future if needed.  Using include directive ensures build doesn't fail
-# if .inc file doesn't exist:
-# https://www.yoctoproject.org/pipermail/yocto/2019-August/046484.html
-include ${@'sunxi-mali-driver.inc' if 'use-mailine-graphics' not in d.getVar("MACHINEOVERRIDES").split(":") else 'sunxi-mailine-graphics-drivers.inc' }
+PREFERRED_PROVIDER_virtual/mesa ?= "mesa-gl"
+PREFERRED_PROVIDER_virtual/libgl ?= "mesa-gl"
+PREFERRED_PROVIDER_virtual/libgles1 ?= "sunxi-mali"
+PREFERRED_PROVIDER_virtual/libgles2 ?= "sunxi-mali"
+PREFERRED_PROVIDER_virtual/egl ?= "sunxi-mali"
+
+PACKAGECONFIG_remove_pn-xserver-xorg = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'glamor', '', d)}"
+
+XSERVER += "sunxi-mali \
+            sunxi-mali-dev"
+
+MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "\
+ kernel-module-mali \
+ kernel-module-mali-drm \
+  "
--- a/conf/machine/include/sunxi.inc
+++ b/conf/machine/include/sunxi.inc
@ -15,14 +15,14 @@ XSERVER = "xserver-xorg \
           xf86-input-keyboard"

 PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
-PREFERRED_VERSION_linux-mainline ?= "5.10.%"
+PREFERRED_VERSION_linux-mainline ?= "4.19%"
 PREFERRED_PROVIDER_u-boot ?= "u-boot"
 PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"

 KERNEL_IMAGETYPE ?= "uImage"

 IMAGE_CLASSES += "sdcard_image-sunxi"
-IMAGE_FSTYPES += "ext3 tar.gz sunxi-sdimg wic.gz wic.bmap"
+IMAGE_FSTYPES += "ext3 tar.gz sunxi-sdimg"

 MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"

@ -34,16 +34,3 @@ SPL_BINARY ?= "u-boot-sunxi-with-spl.bin"

 SERIAL_CONSOLE ?= "115200 ttyS0"
 MACHINE_FEATURES ?= "alsa apm keyboard rtc serial screen usbgadget usbhost vfat"
-
-# Mimic the sdcard_image-sunxi.bbclass
-# image-version-info file was also generated and installed to boot partition,
-# but it is missing here - can be added somehow (how?) if required
-SUNXI_FEX_FILE ?= " "
-SUNXI_BOOT_SPACE ?= "40"
-IMAGE_BOOT_FILES ?= "${KERNEL_IMAGETYPE} boot.scr"
-# ship fex file for sunxi kernel, devicetree file for mainline kernel
-IMAGE_BOOT_FILES += "${@bb.utils.contains('PREFERRED_PROVIDER_virtual/kernel', 'linux-sunxi', '${SUNXI_FEX_FILE}', '${KERNEL_DEVICETREE}', d)}"
-WKS_FILES ?= "sunxi-sdcard-image.wks.in"
-WKS_FILE_DEPENDS ?= "virtual/kernel u-boot"
-# in case of sunxi kernel, sunxi-board-fex must be built prior wic image assembly
-WKS_FILE_DEPENDS += " ${@bb.utils.contains('PREFERRED_PROVIDER_virtual/kernel', 'linux-sunxi', 'sunxi-board-fex', '', d)}"
--- a/conf/machine/licheepi-zero.conf
+++ b/conf/machine/licheepi-zero.conf
@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: licheepi-zero
-#@DESCRIPTION: Machine configuration for the licheepi-zero, based on allwinner V3s CPU
-
-require conf/machine/include/sun8i.inc
-
-
-UBOOT_MACHINE = "LicheePi_Zero_defconfig"
-KERNEL_DEVICETREE = "sun8i-v3s-licheepi-zero.dtb"
--- a/conf/machine/marsboard-a10.conf
+++ b/conf/machine/marsboard-a10.conf
@ -1,10 +0,0 @@
-#@TYPE: Machine
-#@NAME: HAOYU Electronics MarsBoard A10
-#@DESCRIPTION: Machine configuration for the HAOYU Electronics MarsBoard A10, based on Allwinner A10 CPU
-#https://linux-sunxi.org/MarsBoard_A10
-
-require conf/machine/include/sun4i.inc
-
-KERNEL_DEVICETREE = "sun4i-a10-marsboard.dtb"
-UBOOT_MACHINE = "Marsboard_A10_config"
-SUNXI_FEX_FILE = "sys_config/a10/marsboard_a10.fex"
--- a/conf/machine/nanopi-m1-plus.conf
+++ b/conf/machine/nanopi-m1-plus.conf
@ -4,6 +4,8 @@

 require conf/machine/include/sun8i.inc

+PREFERRED_VERSION_u-boot = "v2018.09%"
+
 KERNEL_DEVICETREE = "sun8i-h3-nanopi-m1-plus.dtb"
 UBOOT_MACHINE = "nanopi_m1_plus_defconfig"

--- a/conf/machine/nanopi-m1.conf
+++ b/conf/machine/nanopi-m1.conf
@ -1,8 +0,0 @@
-#@TYPE: Machine
-#@NAME: NanoPi M1
-#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo, based on #the Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-nanopi-m1.dtb"
-UBOOT_MACHINE = "nanopi_m1_defconfig"
--- a/conf/machine/nanopi-neo-air.conf
+++ b/conf/machine/nanopi-neo-air.conf
@ -5,5 +5,7 @@

 require conf/machine/include/sun8i.inc

+PREFERRED_VERSION_u-boot = "v2018.09%"
+
 KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo-air.dtb"
 UBOOT_MACHINE = "nanopi_neo_air_defconfig"
--- a/conf/machine/nanopi-neo-plus2.conf
+++ b/conf/machine/nanopi-neo-plus2.conf
@ -4,7 +4,8 @@
 # on the Allwinner H5 SoC.

 require conf/machine/include/sun50i.inc
-require conf/machine/include/hardware/ap6212a.inc
+
+PREFERRED_VERSION_u-boot = "v2018.09%"

 KERNEL_DEVICETREE = "allwinner/sun50i-h5-nanopi-neo-plus2.dtb"
 UBOOT_MACHINE = "nanopi_neo_plus2_defconfig"
--- a/conf/machine/nanopi-neo.conf
+++ b/conf/machine/nanopi-neo.conf
@ -4,6 +4,8 @@

 require conf/machine/include/sun8i.inc

+PREFERRED_VERSION_u-boot = "v2018.09%"
+
 KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo.dtb"
 UBOOT_MACHINE = "nanopi_neo_defconfig"

--- a/conf/machine/nanopi-neo2.conf
+++ b/conf/machine/nanopi-neo2.conf
@ -5,5 +5,7 @@

 require conf/machine/include/sun50i.inc

+PREFERRED_VERSION_u-boot = "v2018.09%"
+
 KERNEL_DEVICETREE = "allwinner/sun50i-h5-nanopi-neo2.dtb"
 UBOOT_MACHINE = "nanopi_neo2_defconfig"
--- a/conf/machine/nanopi-r1.conf
+++ b/conf/machine/nanopi-r1.conf
@ -1,8 +0,0 @@
-#@TYPE: Machine
-#@NAME: NanoPi R1
-#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi R1, based on #the Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-nanopi-r1.dtb"
-UBOOT_MACHINE = "nanopi_r1_defconfig"
--- a/conf/machine/olinuxino-a64.conf
+++ b/conf/machine/olinuxino-a64.conf
@ -7,7 +7,5 @@ require conf/machine/include/sun50i.inc

 PREFFERED_VERSION_u-boot = "v2018.09%"

-MACHINE_EXTRA_RRECOMMENDS += " linux-firmware-rtl8723"
-
 KERNEL_DEVICETREE = "allwinner/sun50i-a64-olinuxino.dtb"
 UBOOT_MACHINE = "a64-olinuxino_defconfig"
--- a/conf/machine/orange-pi-one.conf
+++ b/conf/machine/orange-pi-one.conf
@ -4,6 +4,8 @@

 require conf/machine/include/sun8i.inc

+PREFERRED_VERSION_u-boot = "v2018.09%"
+
 KERNEL_DEVICETREE = "sun8i-h3-orangepi-one.dtb"
 UBOOT_MACHINE = "orangepi_one_defconfig"

--- a/conf/machine/orange-pi-pc-plus.conf
+++ b/conf/machine/orange-pi-pc-plus.conf
@ -4,6 +4,8 @@

 require conf/machine/include/sun8i.inc

+PREFERRED_VERSION_u-boot = "v2018.09%"
+
 KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc-plus.dtb"
 UBOOT_MACHINE = "orangepi_pc_plus_defconfig"

--- a/conf/machine/orange-pi-pc.conf
+++ b/conf/machine/orange-pi-pc.conf
@ -4,6 +4,8 @@

 require conf/machine/include/sun8i.inc

+PREFERRED_VERSION_u-boot = "v2018.09%"
+
 KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc.dtb"
 UBOOT_MACHINE = "orangepi_pc_defconfig"

--- a/conf/machine/orange-pi-r1.conf
+++ b/conf/machine/orange-pi-r1.conf
@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-r1
-#@DESCRIPTION: Machine configuration for the orange-pi-r1, base on allwinner H2+ CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h2-plus-orangepi-r1.dtb"
-UBOOT_MACHINE = "orangepi_r1_defconfig"
-
--- a/conf/machine/orange-pi-zero-plus2-h3.conf
+++ b/conf/machine/orange-pi-zero-plus2-h3.conf
@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-zero-plus2-h3
-#@DESCRIPTION: Machine configuration for the orange-pi-zero-plus2, based on Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-require conf/machine/include/hardware/ap6212a.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-orangepi-zero-plus2.dtb"
-UBOOT_MACHINE = "orangepi_zero_plus2_h3_defconfig"
--- a/conf/machine/orange-pi-zero-plus2.conf
+++ b/conf/machine/orange-pi-zero-plus2.conf
@ -2,8 +2,10 @@
 #@NAME: orange-pi-zero-plus2
 #@DESCRIPTION: Machine configuration for the orange-pi-zero-plus2, base on Allwinner H5 CPU

+
 require conf/machine/include/sun50i.inc
-require conf/machine/include/hardware/ap6212a.inc
+
+PREFERRED_VERSION_u-boot = "v2018.09%"

 KERNEL_DEVICETREE = "allwinner/sun50i-h5-orangepi-zero-plus2.dtb"
 UBOOT_MACHINE = "orangepi_zero_plus2_defconfig"
--- a/conf/machine/orange-pi-zero.conf
+++ b/conf/machine/orange-pi-zero.conf
@ -4,6 +4,8 @@

 require conf/machine/include/sun8i.inc

+PREFERRED_VERSION_u-boot = "v2018.09%"
+
 KERNEL_DEVICETREE = "sun8i-h2-plus-orangepi-zero.dtb"
 UBOOT_MACHINE = "orangepi_zero_defconfig"

--- a/conf/machine/pcduino.conf
+++ b/conf/machine/pcduino.conf
@ -4,6 +4,8 @@

 require conf/machine/include/sun4i.inc

+PREFERRED_VERSION_u-boot = "v2018.09%"
+
 KERNEL_DEVICETREE = "sun4i-a10-pcduino.dtb"
 UBOOT_MACHINE = "Linksprite_pcDuino_defconfig"
 SUNXI_FEX_FILE = "sys_config/a10/pcduino.fex"
--- a/conf/machine/pine64-plus.conf
+++ b/conf/machine/pine64-plus.conf
@ -5,5 +5,7 @@

 require conf/machine/include/sun50i.inc

+PREFERRED_VERSION_u-boot = "v2018.09%"
+
 KERNEL_DEVICETREE = "allwinner/sun50i-a64-pine64-plus.dtb"
 UBOOT_MACHINE = "pine64_plus_defconfig"
--- a/recipes-bsp/atf/atf-sunxi_git.bb
+++ b/recipes-bsp/atf/atf-sunxi_git.bb
@ -10,7 +10,7 @@ B = "${WORKDIR}/build"

 COMPATIBLE_MACHINE = "(sun50i)"

-PLATFORM:sun50i = "sun50iw1p1"
+PLATFORM_sun50i = "sun50iw1p1"

 LDFLAGS[unexport] = "1"

--- a/recipes-bsp/sunxi-board-fex/sunxi-board-fex.bb
+++ b/recipes-bsp/sunxi-board-fex/sunxi-board-fex.bb
@ -9,9 +9,9 @@ PR = "r0"

 COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"

-SRC_URI = "git://github.com/linux-sunxi/sunxi-boards.git;protocol=https;branch=master"
+SRC_URI = "git://github.com/linux-sunxi/sunxi-boards.git;protocol=git"
 # Increase PV with SRCREV change
-SRCREV = "af5f938ea14a3614d35ad3d9ab51a5d392117444"
+SRCREV = "496ef0fbd166cc2395daa76dd3c359357420963d"

 S = "${WORKDIR}/git"

--- a/recipes-bsp/u-boot/files/0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch
+++ b/recipes-bsp/u-boot/files/0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch
@ -1,4 +1,4 @@
-From b1e4b9672d7bdd4a6a4d08b1514b46af25996cc8 Mon Sep 17 00:00:00 2001
+From f4a77da23b3890b53efab6a927cbe99b76ef3b26 Mon Sep 17 00:00:00 2001
 From: Florin Sarbu <florin@resin.io>
 Date: Wed, 12 Sep 2018 14:22:49 +0200
 Subject: [PATCH] nanopi_neo_air_defconfig: Enable eMMC support
@ -10,11 +10,11 @@ Signed-off-by: Florin Sarbu <florin@resin.io>
 1 file changed, 1 insertion(+)

 diff --git a/configs/nanopi_neo_air_defconfig b/configs/nanopi_neo_air_defconfig
-index baaccf145e..77fa1489e4 100644
+index 8c362fa885..c7929ff015 100644
 --- a/configs/nanopi_neo_air_defconfig
 +++ b/configs/nanopi_neo_air_defconfig
-@@ -9,3 +9,4 @@ CONFIG_CONSOLE_MUX=y
+@@ -15,3 +15,4 @@ CONFIG_CONSOLE_MUX=y
 CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-neo-air"
 CONFIG_USB_EHCI_HCD=y
- CONFIG_USB_OHCI_HCD=y
+ CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
 +CONFIG_MMC_SUNXI_SLOT_EXTRA=2
--- a/recipes-bsp/u-boot/files/0002-Added-nanopi-r1-board-support.patch
+++ b/recipes-bsp/u-boot/files/0002-Added-nanopi-r1-board-support.patch
@ -1,167 +0,0 @@
-From 767a05572ef5b93c2e157749b1754cbe261ee43d Mon Sep 17 00:00:00 2001
-From: Marek Belisko <marek.belisko@open-nandra.com>
-Date: Fri, 8 Apr 2022 11:33:53 +0200
-Subject: [PATCH] Added nanopi-r1 board support
-
-Patch taken from : https://github.com/armbian/build/blob/master/patch/u-boot/u-boot-sunxi/add-nanopi-r1-and-duo2.patch
-
-Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
---
- arch/arm/dts/Makefile               |   1 +
- arch/arm/dts/sun8i-h3-nanopi-r1.dts | 102 ++++++++++++++++++++++++++++++++++++
- configs/nanopi_r1_defconfig         |  22 ++++++++
- 3 files changed, 125 insertions(+)
- create mode 100644 arch/arm/dts/sun8i-h3-nanopi-r1.dts
- create mode 100644 configs/nanopi_r1_defconfig
-
-diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
-index 9fb3868..6743e32 100644
--- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -600,6 +600,7 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \
- 	sun8i-h3-nanopi-m1-plus.dtb \
- 	sun8i-h3-nanopi-neo.dtb \
- 	sun8i-h3-nanopi-neo-air.dtb \
-+	sun8i-h3-nanopi-r1.dtb \
- 	sun8i-h3-orangepi-2.dtb \
- 	sun8i-h3-orangepi-lite.dtb \
- 	sun8i-h3-orangepi-one.dtb \
-diff --git a/arch/arm/dts/sun8i-h3-nanopi-r1.dts b/arch/arm/dts/sun8i-h3-nanopi-r1.dts
-new file mode 100644
-index 0000000..9c3c574
--- /dev/null
-+++ b/arch/arm/dts/sun8i-h3-nanopi-r1.dts
-@@ -0,0 +1,102 @@
-+/*
-+ * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+#include "sun8i-h3-nanopi.dtsi"
-+
-+/ {
-+	model = "FriendlyARM NanoPi R1";
-+	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
-+
-+	reg_gmac_3v3: gmac-3v3 {
-+		compatible = "regulator-fixed";
-+		pinctrl-names = "default";
-+		regulator-name = "gmac-3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		startup-delay-us = <100000>;
-+		enable-active-high;
-+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
-+	};
-+
-+};
-+
-+&ehci0 {
-+	status = "okay";
-+};
-+
-+&pio {
-+	gmac_power_pin_nanopi: gmac_power_pin@0 {
-+		pins = "PD6";
-+		function = "gpio_out";
-+	};
-+};
-+
-+&ohci0 {
-+	status = "okay";
-+};
-+
-+&mmc2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc2_8bit_pins>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	bus-width = <8>;
-+	non-removable;
-+	cap-mmc-hw-reset;
-+	status = "okay";
-+};
-+
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&emac_rgmii_pins>;
-+	phy-supply = <&reg_gmac_3v3>;
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-mode = "rgmii";
-+
-+	status = "okay";
-+};
-+
-+&external_mdio {
-+	ext_rgmii_phy: ethernet-phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <7>;
-+	};
-+};
-diff --git a/configs/nanopi_r1_defconfig b/configs/nanopi_r1_defconfig
-new file mode 100644
-index 0000000..e028b41
--- /dev/null
-+++ b/configs/nanopi_r1_defconfig
-@@ -0,0 +1,22 @@
-+CONFIG_ARM=y
-+CONFIG_ARCH_SUNXI=y
-+CONFIG_SPL=y
-+CONFIG_MACH_SUN8I_H3=y
-+CONFIG_DRAM_CLK=408
-+CONFIG_DRAM_ZQ=3881979
-+CONFIG_DRAM_ODT_EN=y
-+CONFIG_MACPWR="PD6"
-+# CONFIG_VIDEO_DE2 is not set
-+CONFIG_NR_DRAM_BANKS=1
-+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-+CONFIG_CONSOLE_MUX=y
-+CONFIG_SYS_CLK_FREQ=480000000
-+# CONFIG_CMD_FLASH is not set
-+# CONFIG_SPL_DOS_PARTITION is not set
-+# CONFIG_SPL_EFI_PARTITION is not set
-+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-r1"
-+CONFIG_SUN8I_EMAC=y
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_USB_OHCI_HCD=y
-+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
-- 
-2.7.4
-
--- a/recipes-bsp/u-boot/u-boot-sunxi.bb
+++ b/recipes-bsp/u-boot/u-boot-sunxi.bb
@ -19,10 +19,9 @@ UBOOT_MACHINE_olinuxino-a10s = "A10s-OLinuXino-Micro_config"
 UBOOT_MACHINE_meleg = "Mele_A1000G_config"

 SRC_URI = " \
-	git://github.com/linux-sunxi/u-boot-sunxi.git;protocol=https;branch=sunxi \
-	file://0001-gcc5-fixes.patch \
-	file://0002-gcc6-fixes.patch \
-	file://0003-No-gcc-version-specific-includes.patch \
+	git://github.com/linux-sunxi/u-boot-sunxi.git;protocol=git;branch=sunxi \
+	file://0002-gcc5-fixes.patch \
+	file://0003-gcc6-fixes.patch \
 	"

 PE = "1"
@ -36,7 +35,3 @@ S = "${WORKDIR}/git"
 PACKAGE_ARCH = "${MACHINE_ARCH}"

 SPL_BINARY="u-boot-sunxi-with-spl.bin"
-
-do_configure () {
-    oe_runmake -C ${S} O=${B} ${UBOOT_MACHINE}
-}
--- a/recipes-bsp/u-boot/u-boot-sunxi/0002-gcc5-fixes.patch
+++ b/recipes-bsp/u-boot/u-boot-sunxi/0002-gcc5-fixes.patch
--- a/recipes-bsp/u-boot/u-boot-sunxi/0003-No-gcc-version-specific-includes.patch
+++ b/recipes-bsp/u-boot/u-boot-sunxi/0003-No-gcc-version-specific-includes.patch
@ -1,24 +0,0 @@
-From bc4aa5814cbedbfaa1c79dfe7ea2571fee7f2d51 Mon Sep 17 00:00:00 2001
-From: Andrey Lebedev <andrey@lebedev.lt>
-Date: Wed, 22 Jan 2020 20:00:11 +0200
-Subject: [PATCH] No gcc version-specific includes
-
-In order to support gcc-5 and above. Fixes compilation errors like
-
-linux/compiler-gcc9.h: No such file or directory
---
- include/linux/compiler-gcc.h | 1 -
- 1 file changed, 1 deletion(-)
-
-diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
-index 9896e547b9..5f0bd65f3a 100644
--- a/include/linux/compiler-gcc.h
-+++ b/include/linux/compiler-gcc.h
-@@ -90,4 +90,3 @@
- #define __gcc_header(x) #x
- #define _gcc_header(x) __gcc_header(linux/compiler-gcc##x.h)
- #define gcc_header(x) _gcc_header(x)
-#include gcc_header(__GNUC__)
-- 
-2.20.1
-
--- a/recipes-bsp/u-boot/u-boot-sunxi/0003-gcc6-fixes.patch
+++ b/recipes-bsp/u-boot/u-boot-sunxi/0003-gcc6-fixes.patch
--- a/recipes-bsp/u-boot/u-boot_%.bbappend
+++ b/recipes-bsp/u-boot/u-boot_%.bbappend
@ -1,30 +0,0 @@
-FILESEXTRAPATHS:prepend:sunxi := "${THISDIR}/files:"
-
-DEPENDS:append:sunxi = " bc-native dtc-native swig-native python3-native flex-native bison-native "
-DEPENDS:append:sun50i = " atf-sunxi "
-
-COMPATIBLE_MACHINE:sunxi = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
-
-DEFAULT_PREFERENCE:sun4i = "1"
-DEFAULT_PREFERENCE:sun5i = "1"
-DEFAULT_PREFERENCE:sun7i = "1"
-DEFAULT_PREFERENCE:sun8i = "1"
-DEFAULT_PREFERENCE:sun50i = "1"
-
-SRC_URI:append:sunxi = " \
-        file://0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch \
-	file://0002-Added-nanopi-r1-board-support.patch \
-        file://boot.cmd \
-"
-
-UBOOT_ENV_SUFFIX:sunxi = "scr"
-UBOOT_ENV:sunxi = "boot"
-
-EXTRA_OEMAKE:append:sunxi = ' HOSTLDSHARED="${BUILD_CC} -shared ${BUILD_LDFLAGS} ${BUILD_CFLAGS}" '
-EXTRA_OEMAKE:append:sun50i = " BL31=${DEPLOY_DIR_IMAGE}/bl31.bin "
-
-do_compile_sun50i[depends] += "atf-sunxi:do_deploy"
-
-do_compile:append:sunxi() {
-    ${B}/tools/mkimage -C none -A arm -T script -d ${WORKDIR}/boot.cmd ${WORKDIR}/${UBOOT_ENV_BINARY}
-}
--- a/recipes-bsp/u-boot/u-boot_2018.09.bb
+++ b/recipes-bsp/u-boot/u-boot_2018.09.bb
@ -0,0 +1,41 @@
+DESCRIPTION="Upstream's U-boot configured for sunxi devices"
+
+require recipes-bsp/u-boot/u-boot.inc
+
+DEPENDS += " bc-native dtc-native swig-native python3-native flex-native bison-native "
+DEPENDS_append_sun50i = " atf-sunxi "
+
+LICENSE = "GPLv2+"
+LIC_FILES_CHKSUM = "file://Licenses/README;md5=30503fd321432fc713238f582193b78e"
+
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
+
+DEFAULT_PREFERENCE_sun4i="1"
+DEFAULT_PREFERENCE_sun5i="1"
+DEFAULT_PREFERENCE_sun7i="1"
+DEFAULT_PREFERENCE_sun8i="1"
+DEFAULT_PREFERENCE_sun50i="1"
+
+SRC_URI = "git://git.denx.de/u-boot.git;branch=master \
+           file://0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch \
+           file://boot.cmd \
+           "
+
+SRCREV = "f88b6facb87dc4a52f1630eb9d858c0f54c6628e"
+
+PV = "v2018.09+git${SRCPV}"
+PE = "2"
+
+S = "${WORKDIR}/git"
+
+UBOOT_ENV_SUFFIX = "scr"
+UBOOT_ENV = "boot"
+
+EXTRA_OEMAKE += ' HOSTLDSHARED="${BUILD_CC} -shared ${BUILD_LDFLAGS} ${BUILD_CFLAGS}" '
+EXTRA_OEMAKE_append_sun50i = " BL31=${DEPLOY_DIR_IMAGE}/bl31.bin "
+
+do_compile_sun50i[depends] += "atf-sunxi:do_deploy"
+
+do_compile_append() {
+    ${B}/tools/mkimage -C none -A arm -T script -d ${WORKDIR}/boot.cmd ${WORKDIR}/${UBOOT_ENV_BINARY}
+}
--- a/recipes-devtools/python/files/setup.py.patch
+++ b/recipes-devtools/python/files/setup.py.patch
@ -0,0 +1,51 @@
+--- pyA20-0.2.1/setup.py	2014-09-04 12:17:18.000000000 +0200
+++ pyA20-0.2.1/setup.py	2014-11-24 17:44:37.000000000 +0100
+@@ -43,31 +43,31 @@
+     Detect processor type
+     :return:
+     """
+-    cpuinfo = open("/proc/cpuinfo", 'r')
+-    for line in cpuinfo:
+-        if "Hardware" in line:
+-            processor = line.split(":")[1].rstrip()
+    #cpuinfo = open("/proc/cpuinfo", 'r')
+    #for line in cpuinfo:
+    #    if "Hardware" in line:
+    #        processor = line.split(":")[1].rstrip()
+ 
+-            if "sun4i" in processor:
+-                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A10)")
+    #        if "sun4i" in processor:
+    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A10)")
+ 
+-            elif "sun5i" in processor:
+-                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A13)")
+    #        elif "sun5i" in processor:
+    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A13)")
+ 
+-            elif "sun7i" in processor:
+-                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A20)")
+    #        elif "sun7i" in processor:
+    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A20)")
+ 
+-            else:
+-                print ("Detected processor: " + print_color("unknown"))
+    #        else:
+    #            print ("Detected processor: " + print_color("unknown"))
+ 
+ 
+-            if processor_type not in processor:
+-                print_warning()
+    #        if processor_type not in processor:
+    #            print_warning()
+ 
+-            return
+    return
+ 
+-    print ("No processor detected")
+-    print_warning()
+    #print ("No processor detected")
+    #print_warning()
+ 
+ 
+ class build_ext(_build_ext):
--- a/recipes-devtools/python/pya20_0.2.12.bb
+++ b/recipes-devtools/python/pya20_0.2.12.bb
@ -1,23 +1,24 @@
 DESCRIPTION = "A module to control Allwinner GPIO,SPI and I2C channels"
 HOMEPAGE = "https://pypi.python.org/pypi/pyA20"
 SECTION = "devel/python"
-LICENSE = "GPLv3"
-LIC_FILES_CHKSUM = "file://PKG-INFO;md5=4e584373bb0f46ef1e423cb7df37847d"
-DEPENDS = "python3"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://PKG-INFO;md5=bfe0261ded6cff75086193ec2f79129e"
+DEPENDS = "python"

 # No GPIO mappings for other machines yet
 COMPATIBLE_MACHINE = "(olinuxino-a13|olinuxino-a10|olinuxino-a20|olinuxino-a10lime|olinuxino-a20lime|olinuxino-a20lime2|olinuxino-a13som|olinuxino-a20som)"

 SRC_URI = "https://pypi.python.org/packages/source/p/pyA20/pyA20-${PV}.tar.gz \
+           file://setup.py.patch \
           file://mapping.h \
          "
 S = "${WORKDIR}/pyA20-${PV}"

-inherit distutils3
+inherit distutils

-do_compile:prepend() { 
+do_compile_prepend() { 
 cp ${WORKDIR}/mapping.h ${S}/pyA20/gpio/mapping.h
 }

-SRC_URI[md5sum] = "cab03b4931199804603d1074f6d8f48f"
-SRC_URI[sha256sum] = "4bef559a9c5a4d648d9834bad996cf2805b20d6063b8051029ffdf9deda2b536"
+SRC_URI[md5sum] = "2290066bbe274000c53693959a8005b4"
+SRC_URI[sha256sum] = "b15e4ee1016b7eb52001cbccde3751868624a88d2adbb9adc5404628f7e59e7e"
--- a/recipes-devtools/python/pya20som_0.2.1.bb
+++ b/recipes-devtools/python/pya20som_0.2.1.bb
@ -0,0 +1,24 @@
+DESCRIPTION = "A module to control Allwinner GPIO,SPI and I2C channels"
+HOMEPAGE = "https://pypi.python.org/pypi/pyA20SOM"
+SECTION = "devel/python"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://PKG-INFO;md5=cf6345f2cb2acee98b01c493d68b8322"
+DEPENDS = "python"
+
+# No GPIO mappings for other machines yet
+COMPATIBLE_MACHINE = "olinuxino-a20som"
+
+SRC_URI = "https://pypi.python.org/packages/source/p/pyA20SOM/pyA20SOM-${PV}.tar.gz \
+           file://setup.py.patch \
+           file://mapping.h \
+          "
+S = "${WORKDIR}/pyA20SOM-${PV}"
+
+inherit distutils
+
+do_compile_prepend() { 
+cp ${WORKDIR}/mapping.h ${S}/pyA20SOM/gpio/mapping.h
+}
+
+SRC_URI[md5sum] = "a720115ef1d3dffe82f42f2157ca1c56"
+SRC_URI[sha256sum] = "1ac1025596cc112964f7caac9a6a523d5da61623c248ccc178c6cbb4bc1b4549"
--- a/recipes-graphics/libgles/sunxi-mali_git.bb
+++ b/recipes-graphics/libgles/sunxi-mali_git.bb
@ -21,7 +21,7 @@ python __anonymous() {
        raise bb.parse.SkipPackage("%s-%s ONLY supports hardfp mode for now" % (pkgn, pkgv))
 }

-SRCREV = "d343311efc8db166d8371b28494f0f27b6a58724"
+SRCREV_pn-${PN} = "d343311efc8db166d8371b28494f0f27b6a58724"
 SRC_URI = "gitsm://github.com/linux-sunxi/sunxi-mali.git \
           file://0001-Add-EGLSyncKHR-EGLTimeKHR-and-GLChar-definition.patch \
           file://0002-Add-missing-GLchar-definition.patch \
@ -92,13 +92,13 @@ do_install() {
 # Packages like xf86-video-fbturbo dlopen() libUMP.so, so we do need to ship the .so files in ${PN}
 PACKAGES =+ "${PN}-test"

-RPROVIDES:${PN} += "libGLESv2.so libEGL.so libGLESv2.so libGLESv1_CM.so libMali.so"
-RDEPENDS:${PN}-test = "${PN}"
+RPROVIDES_${PN} += "libGLESv2.so libEGL.so libGLESv2.so libGLESv1_CM.so libMali.so"
+RDEPENDS_${PN}-test = "${PN}"

-FILES:${PN} += "${libdir}/lib*.so"
-FILES:${PN}-dev = "${includedir} ${libdir}/pkgconfig/*"
-FILES:${PN}-test = "${bindir}/sunximali-test"
+FILES_${PN} += "${libdir}/lib*.so"
+FILES_${PN}-dev = "${includedir} ${libdir}/pkgconfig/*"
+FILES_${PN}-test = "${bindir}/sunximali-test"

 # These are closed binaries generated elsewhere so don't check ldflags & text relocations
-INSANE_SKIP:${PN} = "dev-so ldflags textrel"
-INSANE_SKIP:${PN}-test = "dev-so ldflags textrel"
+INSANE_SKIP_${PN} = "dev-so ldflags textrel"
+INSANE_SKIP_${PN}-test = "dev-so ldflags textrel"
--- a/recipes-graphics/libump/libump_git.bb
+++ b/recipes-graphics/libump/libump_git.bb
@ -6,9 +6,9 @@ LIC_FILES_CHKSUM = "file://debian/copyright;md5=edf7fb6071cae7ec80d537a05ee17198
 inherit autotools

 PV = "r4p0-00rel0+git${SRCPV}"
-SRCREV = "ec0680628744f30b8fac35e41a7bd8e23e59c39f"
+SRCREV_pn-${PN} = "ec0680628744f30b8fac35e41a7bd8e23e59c39f"

-SRC_URI = "git://github.com/linux-sunxi/libump.git;protocol=https;branch=master"
+SRC_URI = "git://github.com/linux-sunxi/libump.git"

 S = "${WORKDIR}/git"

--- a/recipes-graphics/mesa/mesa_%.bbappend
+++ b/recipes-graphics/mesa/mesa_%.bbappend
@ -1,5 +0,0 @@
-# Enable lima and panfrost Mesa drivers
-PACKAGECONFIG:append:use-mailine-graphics = " lima panfrost"
-# Enable KMS renderonly Mesa support
-# See https://cgit.freedesktop.org/mesa/mesa/commit/?id=2b780fe89300199f2334539aa1678e9b68f0434f
-GALLIUMDRIVERS:append:use-mailine-graphics = ",kmsro"
--- a/recipes-graphics/tslib/tslib_1.1.bbappend.disabled
+++ b/recipes-graphics/tslib/tslib_1.1.bbappend.disabled
@ -1,4 +1,4 @@
-FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"

 SRC_URI += "file://tslib.patch"

--- a/recipes-graphics/xorg-xserver/libdri2_git.bb
+++ b/recipes-graphics/xorg-xserver/libdri2_git.bb
@ -9,7 +9,7 @@ PE = "1"
 PV = "1.0.0+git${SRCPV}"
 SRC_URI = "git://github.com/robclark/libdri2.git;protocol=http;branch=master"

-SRCREV = "4f1eef3183df2b270c3d5cbef07343ee5127a6a4"
+SRCREV_pn-${PN} = "4f1eef3183df2b270c3d5cbef07343ee5127a6a4"

 S = "${WORKDIR}/git"

--- a/recipes-graphics/xorg-xserver/xf86-video-fbturbo_git.bb
+++ b/recipes-graphics/xorg-xserver/xf86-video-fbturbo_git.bb
@ -9,7 +9,7 @@ DEPENDS += "sunxi-mali libump xorgproto"

 PE = "3"
 PV = "0.5.1+git${SRCPV}"
-SRCREV = "e094e3c8f9004ca3347694bd05b99d136e8621b9"
+SRCREV_pn-${PN} = "e094e3c8f9004ca3347694bd05b99d136e8621b9"

 SRC_URI = "git://github.com/ssvb/xf86-video-fbturbo.git;protocol=http;branch=master \
           file://20-fbturbo.conf"
@ -18,9 +18,9 @@ S = "${WORKDIR}/git"

 CFLAGS += " -I${STAGING_INCDIR}/xorg "

-do_install:append() {
+do_install_append() {
    install -d ${D}${datadir}/X11/xorg.conf.d
    install -m 0644 ${WORKDIR}/20-fbturbo.conf ${D}${datadir}/X11/xorg.conf.d
 }

-FILES:${PN} += "${datadir}/X11/xorg.conf.d/20-fbturbo.conf"
+FILES_${PN} += "${datadir}/X11/xorg.conf.d/20-fbturbo.conf"
--- a/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
+++ b/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
@ -1 +1 @@
-FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
--- a/recipes-kernel/linux-firmware/linux-firmware_%.bbappend
+++ b/recipes-kernel/linux-firmware/linux-firmware_%.bbappend
@ -1,13 +0,0 @@
-# The brcmfmac driver looks for NVRAM files using the first entry in board
-# compatible since kernel >= 5.0:
-# https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0ad4b55b2f29784f93875e6231bf57cd233624a2
-# We create a link to the AP6212 module NVRAM file so that firmware is
-# autodetected by the driver.
-# WARNING: The following commit is required for NVRAM files to be included in
-# linux-firmware-bcm43430 package:
-# http://git.openembedded.org/openembedded-core/commit/?id=dde0f79f32fa6bab045ef60199903f74c4cc3393
-do_install:append() {
-	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2.txt
-	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2-h3.txt
-	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt
-}
--- a/recipes-kernel/linux/linux-mainline/0002-ARM-dts-sun8i-h3-Add-initial-NanoPi-R1-support.patch
+++ b/recipes-kernel/linux/linux-mainline/0002-ARM-dts-sun8i-h3-Add-initial-NanoPi-R1-support.patch
@ -1,236 +0,0 @@
-From 692c8efb60d033fa0df3d79d4aee6e3e1d966425 Mon Sep 17 00:00:00 2001
-From: Marek Belisko <marek.belisko@open-nandra.com>
-Date: Wed, 13 Apr 2022 11:19:29 +0200
-Subject: [PATCH] ARM: dts: sun8i: h3: Add initial NanoPi R1 support
-
-The NanoPi R1 is a complete open source board developed
-by FriendlyElec for makers, hobbyists, fans and etc.
-
-NanoPi R1 key features
- Allwinner H3, Quad-core Cortex-A7@1.2GHz
- 512MB/1GB DDR3 RAM
- 8GB eMMC
- microSD slot
- 10/100/1000M Ethernet x 1
- 10/100 Ethernet x 1
- Wifi 802.11b/g/n
- Bluetooth 4.0
- Serial Debug Port
- 5V 2A DC power-supply
-
-Signed-off-by: Yu-Tung Chang <mtwget@gmail.com>
-Signed-off-by: Maxime Ripard <maxime@cerno.tech>
-Link: https://lore.kernel.org/r/20201102100157.85801-2-mtwget@gmail.com
---
- Documentation/devicetree/bindings/arm/sunxi.yaml |   5 +
- arch/arm/boot/dts/Makefile                       |   1 +
- arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts         | 169 +++++++++++++++++++++++
- 3 files changed, 175 insertions(+)
- create mode 100644 arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
-
-diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
-index cab8e1b..5424bab 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
-+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
-@@ -251,6 +251,11 @@ properties:
-           - const: friendlyarm,nanopi-neo-plus2
-           - const: allwinner,sun50i-h5
- 
-+      - description: FriendlyARM NanoPi R1
-+        items:
-+          - const: friendlyarm,nanopi-r1
-+          - const: allwinner,sun8i-h3
-+
-       - description: Gemei G9 Tablet
-         items:
-           - const: gemei,g9
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 4c3ba04..494639a 100644
--- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -1240,6 +1240,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
- 	sun8i-h3-nanopi-m1-plus.dtb \
- 	sun8i-h3-nanopi-neo.dtb \
- 	sun8i-h3-nanopi-neo-air.dtb \
-+	sun8i-h3-nanopi-r1.dtb \
- 	sun8i-h3-orangepi-2.dtb \
- 	sun8i-h3-orangepi-lite.dtb \
- 	sun8i-h3-orangepi-one.dtb \
-diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
-new file mode 100644
-index 0000000..204a39f
--- /dev/null
-+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
-@@ -0,0 +1,169 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
-+ * Copyright (C) 2020 Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
-+ * Copyright (C) 2020 Yu-Tung Chang <mtwget@gmail.com>
-+*/
-+
-+#include "sun8i-h3-nanopi.dtsi"
-+#include <dt-bindings/leds/common.h>
-+
-+/ {
-+	model = "FriendlyARM NanoPi R1";
-+	compatible = "friendlyarm,nanopi-r1", "allwinner,sun8i-h3";
-+
-+	aliases {
-+		serial1 = &uart1;
-+		ethernet0 = &emac;
-+		ethernet1 = &wifi;
-+	};
-+
-+	reg_gmac_3v3: gmac-3v3 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "gmac-3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		startup-delay-us = <100000>;
-+		enable-active-high;
-+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
-+	};
-+
-+	reg_vdd_cpux: gpio-regulator {
-+		compatible = "regulator-gpio";
-+		regulator-name = "vdd-cpux";
-+		regulator-type = "voltage";
-+		regulator-boot-on;
-+		regulator-always-on;
-+		regulator-min-microvolt = <1100000>;
-+		regulator-max-microvolt = <1300000>;
-+		regulator-ramp-delay = <50>;
-+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
-+		gpios-states = <0x1>;
-+		states = <1100000 0x0
-+			  1300000 0x1>;
-+	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-+		clocks = <&rtc 1>;
-+		clock-names = "ext_clock";
-+	};
-+
-+	leds {
-+		led-2 {
-+			function = LED_FUNCTION_WAN;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
-+		};
-+
-+		led-3 {
-+			function = LED_FUNCTION_LAN;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>; /* PA9 */
-+		};
-+	};
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&reg_vdd_cpux>;
-+};
-+
-+&ehci1 {
-+	status = "okay";
-+};
-+
-+&ehci2 {
-+	status = "okay";
-+};
-+
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&emac_rgmii_pins>;
-+	phy-supply = <&reg_gmac_3v3>;
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-mode = "rgmii-id";
-+	status = "okay";
-+};
-+
-+&external_mdio {
-+	ext_rgmii_phy: ethernet-phy@7 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <7>;
-+	};
-+};
-+
-+&mmc1 {
-+	vmmc-supply = <&reg_vcc3v3>;
-+	vqmmc-supply = <&reg_vcc3v3>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	wifi: wifi@1 {
-+		reg = <1>;
-+		compatible = "brcm,bcm4329-fmac";
-+		interrupt-parent = <&pio>;
-+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
-+		interrupt-names = "host-wake";
-+	};
-+};
-+
-+&mmc2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc2_8bit_pins>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	vqmmc-supply = <&reg_vcc3v3>;
-+	bus-width = <8>;
-+	non-removable;
-+	status = "okay";
-+};
-+
-+&ohci1 {
-+	status = "okay";
-+};
-+
-+&ohci2 {
-+	status = "okay";
-+};
-+
-+&reg_usb0_vbus {
-+	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
-+	status = "okay";
-+};
-+
-+&uart1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart1_pins>;
-+	status = "okay";
-+};
-+
-+&uart3 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
-+	uart-has-rtscts;
-+	status = "okay";
-+
-+	bluetooth {
-+		compatible = "brcm,bcm43438-bt";
-+		clocks = <&rtc 1>;
-+		clock-names = "lpo";
-+		vbat-supply = <&reg_vcc3v3>;
-+		vddio-supply = <&reg_vcc3v3>;
-+		device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
-+		host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
-+		shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
-+	};
-+};
-+
-+&usb_otg {
-+	status = "okay";
-+	dr_mode = "otg";
-+};
-+
-+&usbphy {
-+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
-+	usb0_vbus-supply = <&reg_usb0_vbus>;
-+	status = "okay";
-+};
-- 
-2.7.4
-
--- a/recipes-kernel/linux/linux-mainline/0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch
+++ b/recipes-kernel/linux/linux-mainline/0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch
@ -0,0 +1,80 @@
+From 4ca766a768e783ee5198f1935b7f46a5df9b4a35 Mon Sep 17 00:00:00 2001
+From: Jelle van der Waa <jelle@vdwaa.nl>
+Date: Tue, 23 Jan 2018 15:58:44 -0800
+Subject: [PATCH] ARM: dts: nanopi-neo-air: Add WiFi / eMMC
+
+Enable the WiFi (AP6212) chip and eMMC support for the NanoPi NEO Air.
+
+This patch was originally submitted by Jelle van der Waa. Martin Kelly
+modified it to compile on the latest kernel, fixed up some review
+comments from Maxime Ripard, and re-tested the patch.
+
+The patch has been reworked to add back eMMC support which has been left
+out at the last backport.
+
+Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
+Cc: linux-sunxi@googlegroups.com
+Cc: devicetree@vger.kernel.org
+Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
+Signed-off-by: Martin Kelly <mkelly@xevo.com>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+Signed-off-by: Florin Sarbu <florin@resin.io>
+---
+ arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts | 34 +++++++++++++++++++++++++++
+ 1 file changed, 34 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+index 03ff6f8..a9331fe 100644
+--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+@@ -72,6 +72,11 @@
+ 			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+ 		};
+ 	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+	};
+ };
+ 
+ &mmc0 {
+@@ -84,6 +89,35 @@
+ 	status = "okay";
+ };
+ 
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+ &uart0 {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&uart0_pins_a>;
+-- 
+2.11.0
+
--- a/recipes-kernel/linux/linux-mainline/aarch64/defconfig
+++ b/recipes-kernel/linux/linux-mainline/aarch64/defconfig
@ -141,11 +141,6 @@ CONFIG_BT_LEDS=y
 # CONFIG_BT_DEBUGFS is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_LL=y
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_PRIV=y
 CONFIG_CFG80211=m
 CONFIG_MAC80211=m
 CONFIG_MAC80211_LEDS=y
@ -339,7 +334,6 @@ CONFIG_MFD_MAX77620=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_RK808=y
 CONFIG_MFD_SEC_CORE=y
-CONFIG_REGULATOR=y
 CONFIG_REGULATOR_AXP20X=y
 CONFIG_REGULATOR_FAN53555=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
@ -500,8 +494,6 @@ CONFIG_VIRTIO_BALLOON=y
 CONFIG_VIRTIO_MMIO=y
 CONFIG_XEN_GNTDEV=y
 CONFIG_XEN_GRANT_DEV_ALLOC=y
-CONFIG_STAGING=y
-CONFIG_RTL8723BS=m
 CONFIG_COMMON_CLK_RK808=y
 CONFIG_COMMON_CLK_SCPI=y
 CONFIG_COMMON_CLK_CS2000_CP=y
--- a/recipes-kernel/linux/linux-mainline/arm/defconfig
+++ b/recipes-kernel/linux/linux-mainline/arm/defconfig
@ -485,8 +485,8 @@ CONFIG_CW1200_WLAN_SDIO=m
 CONFIG_CW1200_WLAN_SPI=m
 CONFIG_RSI_91X=m
 # CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_MOUSE=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_SUN4I=y
 CONFIG_INPUT_MISC=y
--- a/recipes-kernel/linux/linux-mainline/axp20x.cfg
+++ b/recipes-kernel/linux/linux-mainline/axp20x.cfg
@ -1,4 +0,0 @@
-CONFIG_MFD_AXP20X_I2C=y
-CONFIG_MFD_AXP20X=y
-CONFIG_IIO=y
-CONFIG_AXP20X_POWER=y
--- a/recipes-kernel/linux/linux-mainline/drm.cfg
+++ b/recipes-kernel/linux/linux-mainline/drm.cfg
@ -1,9 +0,0 @@
-CONFIG_DRM=y
-CONFIG_DRM_SUN4I=y
-CONFIG_DRM_SUN8I_DW_HDMI=y
-CONFIG_DRM_SUN8I_MIXER=y
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_DRM_LIMA=y
-CONFIG_DRM_PANFROST=y
-CONFIG_CMA=y
-CONFIG_DMA_CMA=y
--- a/recipes-kernel/linux/linux-mainline/orange-pi-zero/0001-dts-orange-pi-zero-Add-wifi-support.patch
+++ b/recipes-kernel/linux/linux-mainline/orange-pi-zero/0001-dts-orange-pi-zero-Add-wifi-support.patch
--- a/recipes-kernel/linux/linux-mainline_4.19.63.bb
+++ b/recipes-kernel/linux/linux-mainline_4.19.63.bb
@ -0,0 +1,32 @@
+SECTION = "kernel"
+DESCRIPTION = "Mainline Linux kernel"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
+
+inherit kernel
+
+require linux.inc
+
+# Since we're not using git, this doesn't make a difference, but we need to fill
+# in something or kernel-yocto.bbclass will fail.
+KBRANCH ?= "master"
+
+# Pull in the devicetree files into the rootfs
+RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"
+
+KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
+
+S = "${WORKDIR}/linux-${PV}"
+
+SRC_URI[md5sum] = "5f72b9a1e40192aecf867ff2cdcc15ba"
+SRC_URI[sha256sum] = "75988760b931864b46292dcfad1dd54b3f4da10168041f48ca6d7f6dd4e5d25d"
+
+SRC_URI = "https://www.kernel.org/pub/linux/kernel/v4.x/linux-${PV}.tar.xz \
+        file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
+        file://defconfig \
+        "
+
+SRC_URI_append_orange-pi-zero += "\
+	file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
+	"
--- a/recipes-kernel/linux/linux-mainline_5.0.19.bb
+++ b/recipes-kernel/linux/linux-mainline_5.0.19.bb
@ -1,4 +1,5 @@
 SECTION = "kernel"
+DESCRIPTION = "Mainline Linux kernel"
 LICENSE = "GPLv2"
 LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
 COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
@ -11,8 +12,6 @@ require linux.inc
 # in something or kernel-yocto.bbclass will fail.
 KBRANCH ?= "master"

-DEPENDS += "rsync-native"
-
 # Pull in the devicetree files into the rootfs
 RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"

@ -20,14 +19,14 @@ KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"

 S = "${WORKDIR}/linux-${PV}"

+SRC_URI[md5sum] = "52fb710109527b042278359526588da8"
+SRC_URI[sha256sum] = "0bf0d5c64dafc1184e9aafd2f3ebb77aa88ddee881a7766436258feaa214d9ec"
+
 SRC_URI = "https://www.kernel.org/pub/linux/kernel/v5.x/linux-${PV}.tar.xz \
+        file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
+        file://defconfig \
+        "
+
+SRC_URI_append_orange-pi-zero += "\
 	file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
-	file://0002-ARM-dts-sun8i-h3-Add-initial-NanoPi-R1-support.patch \
-	file://defconfig \
-"
-
-SRC_URI:append:use-mailine-graphics = " file://drm.cfg"
-SRC_URI:append:bananapi = " file://axp20x.cfg"
-SRC_URI:append:cubietruck = " file://axp20x.cfg"
-
-FILES_${KERNEL_PACKAGE_NAME}-base:append = " ${nonarch_base_libdir}/modules/${KERNEL_VERSION}/modules.builtin.modinfo"
+	"
--- a/recipes-kernel/linux/linux-mainline_5.10.2.bb
+++ b/recipes-kernel/linux/linux-mainline_5.10.2.bb
@ -1,8 +0,0 @@
-require linux-mainline.inc
-
-DESCRIPTION = "Mainline Longterm Linux kernel"
-
-LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46"
-
-SRC_URI[md5sum] = "0751179f60de73eb2cd93f161fa52fcf"
-SRC_URI[sha256sum] = "3b84e13abae26af17ebccc4d7212f5843a991127a73a320848d5c6942ef781a2"
--- a/recipes-kernel/linux/linux-mainline_5.2-rc2.bb
+++ b/recipes-kernel/linux/linux-mainline_5.2-rc2.bb
@ -0,0 +1,34 @@
+SECTION = "kernel"
+DESCRIPTION = "Mainline Linux kernel"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
+
+inherit kernel
+
+require linux.inc
+
+# Since we're not using git, this doesn't make a difference, but we need to fill
+# in something or kernel-yocto.bbclass will fail.
+KBRANCH ?= "master"
+
+# Pull in the devicetree files into the rootfs
+RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"
+
+KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
+
+S = "${WORKDIR}/linux-${PV}"
+
+SRC_URI[md5sum] = "bf80c4ab5f475a2c0846340fb9eb6449"
+SRC_URI[sha256sum] = "8ec8258e75ebdcd8197328b8571435c246f55d7da7f6ed65e96aa8d4bff9a639"
+
+SRC_URI = "https://git.kernel.org/torvalds/t/linux-${PV}.tar.gz \
+        file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
+        file://defconfig \
+        "
+SRC_URI_append_orange-pi-zero += "\
+	file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
+	"
+
+FILES_${KERNEL_PACKAGE_NAME}-base_append = " ${nonarch_base_libdir}/modules/${KERNEL_VERSION}/modules.builtin.modinfo"
+
--- a/recipes-kernel/linux/linux-mainline_5.4.69.bb
+++ b/recipes-kernel/linux/linux-mainline_5.4.69.bb
@ -1,8 +0,0 @@
-require linux-mainline.inc
-
-DESCRIPTION = "Mainline Longterm Linux kernel"
-
-LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
-
-SRC_URI[md5sum] = "98c8187b801f006ba203db0669e307a5"
-SRC_URI[sha256sum] = "a8b31d716b397303a183e42ad525ff2871024a43e3ea530d0fdf73b7f9d27da7"
--- a/recipes-kernel/linux/linux-sunxi/0001-gcc5-fixes.patch
+++ b/recipes-kernel/linux/linux-sunxi/0001-gcc5-fixes.patch
--- a/recipes-kernel/linux/linux-sunxi/0004-arm-put-user-asm-fix.patch
+++ b/recipes-kernel/linux/linux-sunxi/0004-arm-put-user-asm-fix.patch
@ -1,29 +0,0 @@
-From 25a7e85eb0d58479f7d8895b1b29a648bd07d60e Mon Sep 17 00:00:00 2001
-From: Andrey Lebedev <andrey@lebedev.lt>
-Date: Mon, 20 Jan 2020 23:19:51 +0200
-Subject: [PATCH 2/2] Fix asm error in put_user under gcc version 8 and above
-
-Fixes these errors during compilation of linux-sunxi-3.4 kernel:
-/tmp/ccCGMQmS.s:648: Error: .err encountered
-
-Taken from https://patchwork.kernel.org/patch/10546809/
---
- arch/arm/include/asm/uaccess.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
-index b04850fd..abfafbbf 100644
--- a/arch/arm/include/asm/uaccess.h
-+++ b/arch/arm/include/asm/uaccess.h
-@@ -159,7 +159,7 @@ extern int __put_user_8(void *, unsigned long long);
- 	({								\
- 		unsigned long __limit = current_thread_info()->addr_limit - 1; \
- 		const typeof(*(p)) __user *__tmp_p = (p);		\
-		register const typeof(*(p)) __r2 asm("r2") = (x);	\
-+		register typeof(*(p)) __r2 asm("r2") = (x);		\
- 		register const typeof(*(p)) __user *__p asm("r0") = __tmp_p; \
- 		register unsigned long __l asm("r1") = __limit;		\
- 		register int __e asm("r0");				\
-- 
-2.20.1
-
--- a/recipes-kernel/linux/linux-sunxi/0005-silence-warning.patch
+++ b/recipes-kernel/linux/linux-sunxi/0005-silence-warning.patch
@ -1,25 +0,0 @@
-From 302604ee4a2011871cb26deaf69d567cf57d0fe3 Mon Sep 17 00:00:00 2001
-From: Andrey Lebedev <andrey@lebedev.lt>
-Date: Mon, 20 Jan 2020 23:20:07 +0200
-Subject: [PATCH 1/2] Silence annoying warning
-
---
- include/linux/log2.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/include/linux/log2.h b/include/linux/log2.h
-index fd7ff3d9..14458fdd 100644
--- a/include/linux/log2.h
-+++ b/include/linux/log2.h
-@@ -18,7 +18,7 @@
- /*
-  * deal with unrepresentable constant logarithms
-  */
-extern __attribute__((const, noreturn))
-+extern __attribute__((const))
- int ____ilog2_NaN(void);
- 
- /*
-- 
-2.20.1
-
--- a/recipes-kernel/linux/linux-sunxi_3.4.bb
+++ b/recipes-kernel/linux/linux-sunxi_3.4.bb
@ -3,30 +3,27 @@ require linux.inc
 DESCRIPTION = "Linux kernel for Allwinner a10/a20 processors"

 COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
-RDEPENDS:${PN} += "sunxi-board-fex"
+RDEPENDS_${PN} += "sunxi-board-fex"

 PV = "3.4.104"
 PR = "r1"
-SRCREV = "d47d367036be38c5180632ec8a3ad169a4593a88"
+SRCREV_pn-${PN} = "d47d367036be38c5180632ec8a3ad169a4593a88"

-MACHINE_KERNEL_PR:append = "a"
+MACHINE_KERNEL_PR_append = "a"

-SRC_URI += "git://github.com/linux-sunxi/linux-sunxi.git;branch=sunxi-3.4;protocol=https \
+SRC_URI += "git://github.com/linux-sunxi/linux-sunxi.git;branch=sunxi-3.4;protocol=git \
        file://0001-compiler-gcc-integrate-the-various-compiler-gcc-345-.patch \
        file://0002-use-static-inline-in-ARM-ftrace.patch \
-        file://0003-gcc5-fixes.patch \
-        file://0004-arm-put-user-asm-fix.patch \
-        file://0005-silence-warning.patch \
+        file://0001-gcc5-fixes.patch \
        file://defconfig \
        "
-LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"

 S = "${WORKDIR}/git"

 #fix QA issue "Files/directories were installed but not shipped: /usr/src/debug"
 INHIBIT_PACKAGE_DEBUG_SPLIT = "1"

-do_configure:prepend() {
+do_configure_prepend() {
    #fix arch QA issues ("Architecture did not match")
    rm -f ${S}/drivers/net/wireless/rtxx7x/tools/bin2h
    rm -f ${S}/modules/wifi/ar6302/AR6K_SDK_ISC.build_3.1_RC.329/host/lib/wac/wac
--- a/recipes-kernel/linux/linux.inc
+++ b/recipes-kernel/linux/linux.inc
@ -39,7 +39,7 @@ do_kernel_configme[depends] += "virtual/${TARGET_PREFIX}binutils:do_populate_sys
 do_kernel_configme[depends] += "virtual/${TARGET_PREFIX}gcc:do_populate_sysroot"
 do_kernel_configme[depends] += "bc-native:do_populate_sysroot bison-native:do_populate_sysroot"

-do_configure:prepend() {
+do_configure_prepend() {
    CONF_SED_SCRIPT=""

    #
@ -118,9 +118,15 @@ do_configure:prepend() {
    yes '' | oe_runmake -C ${S} O=${B} oldconfig
 }

-do_configure:append() {
+do_configure_append() {
    if test -e scripts/Makefile.fwinst ; then
        sed -i -e "s:-m0644:-m 0644:g" scripts/Makefile.fwinst
    fi
 }

+do_install_append() {
+    oe_runmake headers_install INSTALL_HDR_PATH=${D}${exec_prefix}/src/linux-${KERNEL_VERSION} ARCH=$ARCH
+}
+
+PACKAGES =+ "kernel-headers"
+FILES_kernel-headers = "${exec_prefix}/src/linux*"
--- a/recipes-kernel/xradio-firmware/xradio-firmware.bb
+++ b/recipes-kernel/xradio-firmware/xradio-firmware.bb
@ -5,7 +5,7 @@ LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/${LICENSE};md5=0ceb3372c9595f0a
 PV = "1.0"
 PR = "r0"

-SRCREV = "761658e1701c77a0a84706754e6db1a25ee60b82"
+SRCREV = "bddd21b7f895be9f0c37e435f0a7ac84405c6091"

 COMPATIBLE_MACHINE = "orange-pi-zero"

@ -20,6 +20,6 @@ do_install() {
    install -m 0644 ${S}/xr819/fw_xr819.bin ${D}${base_libdir}/firmware/xr819/
 }

-FILES:${PN} = "${base_libdir}/*"
+FILES_${PN} = "${base_libdir}/*"

 PACKAGES = "${PN}"
--- a/recipes-kernel/xradio/xradio.bb
+++ b/recipes-kernel/xradio/xradio.bb
@ -7,15 +7,13 @@ inherit module
 PV = "0.1"
 PR = "r0"

-RDEPENDS:${PN} += "xradio-firmware"
+RDEPENDS_${PN} += "xradio-firmware"

 COMPATIBLE_MACHINE = "orange-pi-zero"

-SRCREV = "279868ac96f6db34b65f68c6722830fa0aacb86b"
+SRCREV = "d649e5a78efdc56ecd0951e35ca60db175650232"

-SRC_URI = "\
-	   git://github.com/dbeinder/xradio.git;protocol=https;branch=karabek_rebase \
-	file://0001-Enable-out-of-tree-compilation.patch \
+SRC_URI = "git://github.com/fifteenhex/xradio.git;protocol=https \
          "

 S = "${WORKDIR}/git"
--- a/recipes-kernel/xradio/xradio/0001-Enable-out-of-tree-compilation.patch
+++ b/recipes-kernel/xradio/xradio/0001-Enable-out-of-tree-compilation.patch
@ -1,30 +0,0 @@
-From 15651d333da5429a1544f0a17d5f02c74f693ad7 Mon Sep 17 00:00:00 2001
-From: Marek Belisko <marek.belisko@open-nandra.com>
-Date: Thu, 15 Oct 2020 14:45:07 +0200
-Subject: [PATCH] Enable out of tree compilation
-
-Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
---
- Makefile | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/Makefile b/Makefile
-index 7a0de9a..ee75f0b 100644
--- a/Makefile
-+++ b/Makefile
-@@ -1,9 +1,9 @@
- # SPDX-License-Identifier: GPL-2.0-only
- 
- # # Standalone Makefile - uncomment for out-of-tree compilation
-# CONFIG_WLAN_VENDOR_XRADIO := m
-# ccflags-y += -DCONFIG_XRADIO_USE_EXTENSIONS
-# ccflags-y += -DCONFIG_XRADIO_WAPI_SUPPORT
-+CONFIG_WLAN_VENDOR_XRADIO := m
-+ccflags-y += -DCONFIG_XRADIO_USE_EXTENSIONS
-+ccflags-y += -DCONFIG_XRADIO_WAPI_SUPPORT
- 
- # Kernel part
- 
-- 
-2.7.4
-
--- a/recipes-multimedia/gstreamer/gst-plugin-cedar_git.bb
+++ b/recipes-multimedia/gstreamer/gst-plugin-cedar_git.bb
@ -10,14 +10,14 @@ inherit autotools pkgconfig
 # 0.10.1 Initial Import
 SRCREV = "908987a74d341be1376895023698667892fe5569"

-SRC_URI = "git://github.com/ebutera/gst-plugin-cedar.git;protocol=https;branch=master"
+SRC_URI = "git://github.com/ebutera/gst-plugin-cedar.git"

 PV = "0.10.1+git${SRCPV}"
 PR = "r1"

 S = "${WORKDIR}/git"

-FILES:${PN} += "${libdir}/gstreamer-0.10/*.so"
-FILES:${PN}-dbg += "${libdir}/gstreamer-0.10/.debug"
-FILES:${PN}-dev += "${libdir}/gstreamer-0.10/*.la"
-FILES:${PN}-staticdev += "${libdir}/gstreamer-0.10/*.a"
+FILES_${PN} += "${libdir}/gstreamer-0.10/*.so"
+FILES_${PN}-dbg += "${libdir}/gstreamer-0.10/.debug"
+FILES_${PN}-dev += "${libdir}/gstreamer-0.10/*.la"
+FILES_${PN}-staticdev += "${libdir}/gstreamer-0.10/*.a"
--- a/recipes-support/sunxi-tools/sunxi-tools_git.bb
+++ b/recipes-support/sunxi-tools/sunxi-tools_git.bb
@ -7,7 +7,7 @@ PR = "r0"

 DEPENDS += "libusb"

-SRC_URI = "git://github.com/linux-sunxi/sunxi-tools;protocol=https;branch=master"
+SRC_URI = "git://github.com/linux-sunxi/sunxi-tools;protocol=git"
 SRCREV = "9a3d62aa0c820b3dd42ba3409b2043f4143683cd"

 inherit pkgconfig
@ -16,7 +16,7 @@ S = "${WORKDIR}/git"

 BBCLASSEXTEND = "native nativesdk"

-FILES:${PN} = "${bindir}/*"
+FILES_${PN} = "${bindir}/*"

 CFLAGS = "-std=c99 -D_POSIX_C_SOURCE=200112L -I./include"
 CFLAGS_class-native = "-std=c99 -D_POSIX_C_SOURCE=200112L -I./include"
--- a/wic/sunxi-sdcard-image.wks.in
+++ b/wic/sunxi-sdcard-image.wks.in
@ -1,18 +0,0 @@
-# short-description: Create SD card image with a boot partition
-# long-description:
-# Create an image that can be written onto a SD card using dd for use
-# with Allwinner arm (32-bit) SoC family
-#
-# The disk layout used is:
-#  - --------------------------- -------------- --------------
-# | | u-boot-sunxi-with-spl.bin |     boot     |    rootfs    |
-#  - --------------------------- -------------- --------------
-# ^ ^                           ^              ^              ^
-# | |                           |              |              |
-# 0 |                         2MiB  ${SUNXI_BOOT_SPACE}MiB  ${SUNXI_BOOT_SPACE}MiB + rootfs + IMAGE_EXTRA_SPACE
-#   8KiB 
-#
-
-part u-boot --source rawcopy --sourceparams="file=${SPL_BINARY}" --ondisk mmcblk0 --no-table --align 8
-part /boot --source bootimg-partition --ondisk mmcblk0 --fstype=vfat --label boot --active --align 2048 --fixed-size ${SUNXI_BOOT_SPACE}
-part /     --source rootfs --ondisk mmcblk0 --fstype=ext4 --align 2048
Author	SHA1	Message	Date
Bartłomiej Burdukiewicz	910aa5f159	conf: added sunxi and sunxi64 machine overrides.	2020-11-23 08:19:02 +01:00
Petr Buchta	41953517cb	fixing missing 'compatible' property in reg_vcc_wifi node	2020-02-10 19:57:09 +01:00
Marek Belisko	cfca593338	linux: refresh orange-pi-zero wifi patch Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>	2020-02-10 19:56:57 +01:00
slapin	345cd0d023	linux-sunxi: disable glamor build if Mali is used Unless somebody writes libgbm replacement for binary Mali driver (sort of converter for gbm-UMB) there is no glamor for us. Closes #227	2019-09-07 22:43:19 +02:00
slapin	4a083b6678	Fix soname in Mali.so to make auto-RDEPENDS work The auto-RDEPENDs system reqires that all .so libraries have proper soname set. If library soes not have soname set, it will not be added to RDEPENDs list of other elf files. Closes #240	2019-09-07 22:43:08 +02:00
Marek Belisko	986634abbb	linux-mainline: Bump 4.19 to latest stable Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>	2019-08-07 08:14:58 +02:00