Merge pull request #339 from grzegorzheldt/dunfell

Fix nanopi-neo booting on Dunfell
2025-07-16 13:59:46 +02:00 · 2022-02-12 20:10:03 +01:00 · 2022-02-12 19:52:12 +01:00 · 2021-06-30 11:10:02 +02:00 · 2021-06-30 11:09:57 +02:00 · 2021-06-23 16:51:41 +02:00
50 changed files with 293 additions and 590 deletions
--- a/classes/sdcard_image-sunxi.bbclass
+++ b/classes/sdcard_image-sunxi.bbclass
@ -13,11 +13,8 @@ inherit image_types
 #
 #

-# Use an uncompressed ext4 by default as rootfs
-SDIMG_ROOTFS_TYPE ?= "ext4"
-
 # This image depends on the rootfs image
-IMAGE_TYPEDEP:sunxi-sdimg = "${SDIMG_ROOTFS_TYPE}"
+IMAGE_TYPEDEP_sunxi-sdimg = "${SDIMG_ROOTFS_TYPE}"

 # Boot partition volume id
 BOOTDD_VOLUME_ID ?= "boot"
@ -28,6 +25,8 @@ BOOT_SPACE ?= "40960"
 # First partition begin at sector 2048 : 2048*1024 = 2097152
 IMAGE_ROOTFS_ALIGNMENT = "2048"

+# Use an uncompressed ext4 by default as rootfs
+SDIMG_ROOTFS_TYPE ?= "ext4"
 SDIMG_ROOTFS = "${IMGDEPLOYDIR}/${IMAGE_NAME}.rootfs.${SDIMG_ROOTFS_TYPE}"

 do_image_sunxi_sdimg[depends] += " \
@ -41,7 +40,7 @@ do_image_sunxi_sdimg[depends] += " \
 # SD card image name
 SDIMG = "${IMGDEPLOYDIR}/${IMAGE_NAME}.rootfs.sunxi-sdimg"

-IMAGE_CMD:sunxi-sdimg () {
+IMAGE_CMD_sunxi-sdimg () {

 	# Align partitions
 	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
@ -95,10 +94,6 @@ IMAGE_CMD:sunxi-sdimg () {
 	then
 		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/boot.scr ::boot.scr
 	fi
-        if [ -e "${DEPLOY_DIR_IMAGE}/splash.bmp" ]
-        then
-                mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/splash.bmp ::splash.bmp
-        fi


 	# Add stamp file
@ -121,7 +116,7 @@ IMAGE_CMD:sunxi-sdimg () {
 }

 # write uboot.itb for arm64 boards
-IMAGE_CMD_sunxi-sdimg:append:sun50i () {
+IMAGE_CMD_sunxi-sdimg_append_sun50i () {
 	if [ -e "${DEPLOY_DIR_IMAGE}/${UBOOT_BINARY}" ]
 	then
 		dd if=${DEPLOY_DIR_IMAGE}/${UBOOT_BINARY} of=${SDIMG} bs=1024 seek=40 conv=notrunc
--- a/conf/layer.conf
+++ b/conf/layer.conf
@ -12,6 +12,6 @@ BBFILE_PRIORITY_meta-sunxi = "10"
 # cause compatibility issues with other layers
 LAYERVERSION_meta-sunxi = "1"

-LAYERDEPENDS_meta-sunxi = "core"
+LAYERDEPENDS_meta-sunxi = "core openembedded-layer"

-LAYERSERIES_COMPAT_meta-sunxi = "honister"
+LAYERSERIES_COMPAT_meta-sunxi = "zeus dunfell"
--- a/conf/machine/include/hardware/ap6212a.inc
+++ b/conf/machine/include/hardware/ap6212a.inc
@ -1,5 +1,5 @@
 # Include for boards with AMPAK 6212A Wifi / Bluetooth module
 # https://linux-sunxi.org/Wifi#Ampak

-MACHINE_EXTRA_RRECOMMENDS:append = " kernel-module-brcmfmac"
-MACHINE_EXTRA_RDEPENDS:append = " linux-firmware-bcm43430"
+MACHINE_EXTRA_RRECOMMENDS_append = " kernel-module-brcmfmac"
+MACHINE_EXTRA_RDEPENDS_append = " linux-firmware-bcm43430"
--- a/conf/machine/include/sun4i.inc
+++ b/conf/machine/include/sun4i.inc
@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/arm/armv7a/tune-cortexa8.inc
+require conf/machine/include/tune-cortexa8.inc

 SOC_FAMILY = "sun4i"
--- a/conf/machine/include/sun50i.inc
+++ b/conf/machine/include/sun50i.inc
@ -1,6 +1,6 @@
 require conf/machine/include/sunxi64.inc

 DEFAULTTUNE ?= "cortexa53-crypto"
-require conf/machine/include/arm/armv8a/tune-cortexa53.inc
+require conf/machine/include/tune-cortexa53.inc

 SOC_FAMILY = "sun50i"
--- a/conf/machine/include/sun5i.inc
+++ b/conf/machine/include/sun5i.inc
@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/arm/armv8a/tune-cortexa8.inc
+require conf/machine/include/tune-cortexa8.inc

 SOC_FAMILY = "sun5i"
--- a/conf/machine/include/sun7i.inc
+++ b/conf/machine/include/sun7i.inc
@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/arm/armv7a/tune-cortexa7.inc
+require conf/machine/include/tune-cortexa7.inc

 SOC_FAMILY = "sun7i"
--- a/conf/machine/include/sun8i.inc
+++ b/conf/machine/include/sun8i.inc
@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/arm/armv7a/tune-cortexa7.inc
+require conf/machine/include/tune-cortexa7.inc

 SOC_FAMILY = "sun8i"
--- a/conf/machine/include/sunxi-mali-driver.inc
+++ b/conf/machine/include/sunxi-mali-driver.inc
@ -4,7 +4,7 @@ PREFERRED_PROVIDER_virtual/libgles1 ?= "sunxi-mali"
 PREFERRED_PROVIDER_virtual/libgles2 ?= "sunxi-mali"
 PREFERRED_PROVIDER_virtual/egl ?= "sunxi-mali"

-PACKAGECONFIG:remove:pn-xserver-xorg = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'glamor', '', d)}"
+PACKAGECONFIG_remove_pn-xserver-xorg = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'glamor', '', d)}"

 XSERVER += "sunxi-mali \
            sunxi-mali-dev"
--- a/conf/machine/include/sunxi.inc
+++ b/conf/machine/include/sunxi.inc
@ -1,8 +1,6 @@
 SOC_FAMILY ??= ""
 include conf/machine/include/soc-family.inc

-MACHINEOVERRIDES =. "sunxi:"
-
 # Sub-architecture support
 MACHINE_SOCARCH_SUFFIX ?= ""
 MACHINE_SOCARCH_SUFFIX_sun4i = "-sun4i"
@ -15,14 +13,14 @@ XSERVER = "xserver-xorg \
           xf86-input-keyboard"

 PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
-PREFERRED_VERSION_linux-mainline ?= "5.10.%"
+PREFERRED_VERSION_linux-mainline ?= "5.4.%"
 PREFERRED_PROVIDER_u-boot ?= "u-boot"
 PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"

 KERNEL_IMAGETYPE ?= "uImage"

 IMAGE_CLASSES += "sdcard_image-sunxi"
-IMAGE_FSTYPES += "ext3 tar.gz sunxi-sdimg wic.gz wic.bmap"
+IMAGE_FSTYPES += "ext3 tar.gz sunxi-sdimg"

 MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"

@ -34,16 +32,3 @@ SPL_BINARY ?= "u-boot-sunxi-with-spl.bin"

 SERIAL_CONSOLE ?= "115200 ttyS0"
 MACHINE_FEATURES ?= "alsa apm keyboard rtc serial screen usbgadget usbhost vfat"
-
-# Mimic the sdcard_image-sunxi.bbclass
-# image-version-info file was also generated and installed to boot partition,
-# but it is missing here - can be added somehow (how?) if required
-SUNXI_FEX_FILE ?= " "
-SUNXI_BOOT_SPACE ?= "40"
-IMAGE_BOOT_FILES ?= "${KERNEL_IMAGETYPE} boot.scr"
-# ship fex file for sunxi kernel, devicetree file for mainline kernel
-IMAGE_BOOT_FILES += "${@bb.utils.contains('PREFERRED_PROVIDER_virtual/kernel', 'linux-sunxi', '${SUNXI_FEX_FILE}', '${KERNEL_DEVICETREE}', d)}"
-WKS_FILES ?= "sunxi-sdcard-image.wks.in"
-WKS_FILE_DEPENDS ?= "virtual/kernel u-boot"
-# in case of sunxi kernel, sunxi-board-fex must be built prior wic image assembly
-WKS_FILE_DEPENDS += " ${@bb.utils.contains('PREFERRED_PROVIDER_virtual/kernel', 'linux-sunxi', 'sunxi-board-fex', '', d)}"
--- a/conf/machine/include/sunxi64.inc
+++ b/conf/machine/include/sunxi64.inc
@ -1,8 +1,6 @@
 SOC_FAMILY ??= ""
 include conf/machine/include/soc-family.inc

-MACHINEOVERRIDES =. "sunxi:sunxi64:"
-
 PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
 PREFERRED_PROVIDER_u-boot ?= "u-boot"
 PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
--- a/conf/machine/licheepi-zero.conf
+++ b/conf/machine/licheepi-zero.conf
@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: licheepi-zero
-#@DESCRIPTION: Machine configuration for the licheepi-zero, based on allwinner V3s CPU
-
-require conf/machine/include/sun8i.inc
-
-
-UBOOT_MACHINE = "LicheePi_Zero_defconfig"
-KERNEL_DEVICETREE = "sun8i-v3s-licheepi-zero.dtb"
--- a/conf/machine/marsboard-a10.conf
+++ b/conf/machine/marsboard-a10.conf
@ -1,10 +0,0 @@
-#@TYPE: Machine
-#@NAME: HAOYU Electronics MarsBoard A10
-#@DESCRIPTION: Machine configuration for the HAOYU Electronics MarsBoard A10, based on Allwinner A10 CPU
-#https://linux-sunxi.org/MarsBoard_A10
-
-require conf/machine/include/sun4i.inc
-
-KERNEL_DEVICETREE = "sun4i-a10-marsboard.dtb"
-UBOOT_MACHINE = "Marsboard_A10_config"
-SUNXI_FEX_FILE = "sys_config/a10/marsboard_a10.fex"
--- a/conf/machine/nanopi-m1.conf
+++ b/conf/machine/nanopi-m1.conf
@ -1,8 +0,0 @@
-#@TYPE: Machine
-#@NAME: NanoPi M1
-#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo, based on #the Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-nanopi-m1.dtb"
-UBOOT_MACHINE = "nanopi_m1_defconfig"
--- a/conf/machine/nanopi-r1.conf
+++ b/conf/machine/nanopi-r1.conf
@ -1,8 +0,0 @@
-#@TYPE: Machine
-#@NAME: NanoPi R1
-#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi R1, based on #the Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-nanopi-r1.dtb"
-UBOOT_MACHINE = "nanopi_r1_defconfig"
--- a/conf/machine/orange-pi-plus2e.conf
+++ b/conf/machine/orange-pi-plus2e.conf
@ -0,0 +1,8 @@
+#@TYPE: Machine
+#@NAME: orange-pi-plus2e
+#@DESCRIPTION: Machine configuration for the orange-pi-plus2e, base on allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-orangepi-plus2e.dtb"
+UBOOT_MACHINE = "orangepi_plus2e_defconfig"
--- a/conf/machine/orange-pi-r1.conf
+++ b/conf/machine/orange-pi-r1.conf
@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-r1
-#@DESCRIPTION: Machine configuration for the orange-pi-r1, base on allwinner H2+ CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h2-plus-orangepi-r1.dtb"
-UBOOT_MACHINE = "orangepi_r1_defconfig"
-
--- a/recipes-bsp/atf/atf-sunxi_git.bb
+++ b/recipes-bsp/atf/atf-sunxi_git.bb
@ -10,7 +10,7 @@ B = "${WORKDIR}/build"

 COMPATIBLE_MACHINE = "(sun50i)"

-PLATFORM:sun50i = "sun50iw1p1"
+PLATFORM_sun50i = "sun50iw1p1"

 LDFLAGS[unexport] = "1"

--- a/recipes-bsp/sunxi-board-fex/sunxi-board-fex.bb
+++ b/recipes-bsp/sunxi-board-fex/sunxi-board-fex.bb
@ -9,9 +9,9 @@ PR = "r0"

 COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"

-SRC_URI = "git://github.com/linux-sunxi/sunxi-boards.git;protocol=https;branch=master"
+SRC_URI = "git://github.com/linux-sunxi/sunxi-boards.git;protocol=git"
 # Increase PV with SRCREV change
-SRCREV = "af5f938ea14a3614d35ad3d9ab51a5d392117444"
+SRCREV = "496ef0fbd166cc2395daa76dd3c359357420963d"

 S = "${WORKDIR}/git"

--- a/recipes-bsp/u-boot/files/0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch
+++ b/recipes-bsp/u-boot/files/0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch
@ -1,20 +1,21 @@
-From b1e4b9672d7bdd4a6a4d08b1514b46af25996cc8 Mon Sep 17 00:00:00 2001
+From 6adb2ebdc4022c24497e9ee4dccab41d18e3105d Mon Sep 17 00:00:00 2001
 From: Florin Sarbu <florin@resin.io>
 Date: Wed, 12 Sep 2018 14:22:49 +0200
 Subject: [PATCH] nanopi_neo_air_defconfig: Enable eMMC support

 Upstream-status: Pending
 Signed-off-by: Florin Sarbu <florin@resin.io>
+
 ---
 configs/nanopi_neo_air_defconfig | 1 +
 1 file changed, 1 insertion(+)

 diff --git a/configs/nanopi_neo_air_defconfig b/configs/nanopi_neo_air_defconfig
-index baaccf145e..77fa1489e4 100644
+index 5ad90ddd16..8b7a4eb45d 100644
 --- a/configs/nanopi_neo_air_defconfig
 +++ b/configs/nanopi_neo_air_defconfig
-@@ -9,3 +9,4 @@ CONFIG_CONSOLE_MUX=y
- CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-neo-air"
+@@ -15,3 +15,4 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-neo-air"
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
+ CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
 +CONFIG_MMC_SUNXI_SLOT_EXTRA=2
--- a/recipes-bsp/u-boot/files/0002-Added-nanopi-r1-board-support.patch
+++ b/recipes-bsp/u-boot/files/0002-Added-nanopi-r1-board-support.patch
@ -1,167 +0,0 @@
-From 767a05572ef5b93c2e157749b1754cbe261ee43d Mon Sep 17 00:00:00 2001
-From: Marek Belisko <marek.belisko@open-nandra.com>
-Date: Fri, 8 Apr 2022 11:33:53 +0200
-Subject: [PATCH] Added nanopi-r1 board support
-
-Patch taken from : https://github.com/armbian/build/blob/master/patch/u-boot/u-boot-sunxi/add-nanopi-r1-and-duo2.patch
-
-Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
---
- arch/arm/dts/Makefile               |   1 +
- arch/arm/dts/sun8i-h3-nanopi-r1.dts | 102 ++++++++++++++++++++++++++++++++++++
- configs/nanopi_r1_defconfig         |  22 ++++++++
- 3 files changed, 125 insertions(+)
- create mode 100644 arch/arm/dts/sun8i-h3-nanopi-r1.dts
- create mode 100644 configs/nanopi_r1_defconfig
-
-diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
-index 9fb3868..6743e32 100644
--- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -600,6 +600,7 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \
- 	sun8i-h3-nanopi-m1-plus.dtb \
- 	sun8i-h3-nanopi-neo.dtb \
- 	sun8i-h3-nanopi-neo-air.dtb \
-+	sun8i-h3-nanopi-r1.dtb \
- 	sun8i-h3-orangepi-2.dtb \
- 	sun8i-h3-orangepi-lite.dtb \
- 	sun8i-h3-orangepi-one.dtb \
-diff --git a/arch/arm/dts/sun8i-h3-nanopi-r1.dts b/arch/arm/dts/sun8i-h3-nanopi-r1.dts
-new file mode 100644
-index 0000000..9c3c574
--- /dev/null
-+++ b/arch/arm/dts/sun8i-h3-nanopi-r1.dts
-@@ -0,0 +1,102 @@
-+/*
-+ * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+#include "sun8i-h3-nanopi.dtsi"
-+
-+/ {
-+	model = "FriendlyARM NanoPi R1";
-+	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
-+
-+	reg_gmac_3v3: gmac-3v3 {
-+		compatible = "regulator-fixed";
-+		pinctrl-names = "default";
-+		regulator-name = "gmac-3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		startup-delay-us = <100000>;
-+		enable-active-high;
-+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
-+	};
-+
-+};
-+
-+&ehci0 {
-+	status = "okay";
-+};
-+
-+&pio {
-+	gmac_power_pin_nanopi: gmac_power_pin@0 {
-+		pins = "PD6";
-+		function = "gpio_out";
-+	};
-+};
-+
-+&ohci0 {
-+	status = "okay";
-+};
-+
-+&mmc2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc2_8bit_pins>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	bus-width = <8>;
-+	non-removable;
-+	cap-mmc-hw-reset;
-+	status = "okay";
-+};
-+
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&emac_rgmii_pins>;
-+	phy-supply = <&reg_gmac_3v3>;
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-mode = "rgmii";
-+
-+	status = "okay";
-+};
-+
-+&external_mdio {
-+	ext_rgmii_phy: ethernet-phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <7>;
-+	};
-+};
-diff --git a/configs/nanopi_r1_defconfig b/configs/nanopi_r1_defconfig
-new file mode 100644
-index 0000000..e028b41
--- /dev/null
-+++ b/configs/nanopi_r1_defconfig
-@@ -0,0 +1,22 @@
-+CONFIG_ARM=y
-+CONFIG_ARCH_SUNXI=y
-+CONFIG_SPL=y
-+CONFIG_MACH_SUN8I_H3=y
-+CONFIG_DRAM_CLK=408
-+CONFIG_DRAM_ZQ=3881979
-+CONFIG_DRAM_ODT_EN=y
-+CONFIG_MACPWR="PD6"
-+# CONFIG_VIDEO_DE2 is not set
-+CONFIG_NR_DRAM_BANKS=1
-+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-+CONFIG_CONSOLE_MUX=y
-+CONFIG_SYS_CLK_FREQ=480000000
-+# CONFIG_CMD_FLASH is not set
-+# CONFIG_SPL_DOS_PARTITION is not set
-+# CONFIG_SPL_EFI_PARTITION is not set
-+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-r1"
-+CONFIG_SUN8I_EMAC=y
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_USB_OHCI_HCD=y
-+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
-- 
-2.7.4
-
--- a/recipes-bsp/u-boot/files/0002-Revert-sunxi-psci-avoid-error-address-of-packed-memb.patch
+++ b/recipes-bsp/u-boot/files/0002-Revert-sunxi-psci-avoid-error-address-of-packed-memb.patch
@ -0,0 +1,67 @@
+From bb6f500c10cc8f5f31245626899e0732b7b287c5 Mon Sep 17 00:00:00 2001
+From: Marek Belisko <marek.belisko@open-nandra.com>
+Date: Wed, 19 Aug 2020 13:39:49 +0200
+Subject: [PATCH] Revert "sunxi: psci: avoid error address-of-packed-member"
+
+This reverts commit 9bd34a69a453d409792e08c00953ce8862145e65.
+---
+ arch/arm/cpu/armv7/sunxi/psci.c | 16 +++++-----------
+ 1 file changed, 5 insertions(+), 11 deletions(-)
+
+diff --git a/arch/arm/cpu/armv7/sunxi/psci.c b/arch/arm/cpu/armv7/sunxi/psci.c
+index 5b68900..2c5d99e 100644
+--- a/arch/arm/cpu/armv7/sunxi/psci.c
+++ b/arch/arm/cpu/armv7/sunxi/psci.c
+@@ -75,7 +75,7 @@ static void __secure __mdelay(u32 ms)
+ 	isb();
+ }
+ 
+-static void __secure clamp_release(void __maybe_unused *clamp)
+static void __secure clamp_release(u32 __maybe_unused *clamp)
+ {
+ #if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN7I) || \
+ 	defined(CONFIG_MACH_SUN8I_H3) || \
+@@ -90,7 +90,7 @@ static void __secure clamp_release(void __maybe_unused *clamp)
+ #endif
+ }
+ 
+-static void __secure clamp_set(void __maybe_unused *clamp)
+static void __secure clamp_set(u32 __maybe_unused *clamp)
+ {
+ #if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN7I) || \
+ 	defined(CONFIG_MACH_SUN8I_H3) || \
+@@ -99,28 +99,22 @@ static void __secure clamp_set(void __maybe_unused *clamp)
+ #endif
+ }
+ 
+-static void __secure sunxi_power_switch(void *clamp, void *pwroff_ptr, bool on,
+static void __secure sunxi_power_switch(u32 *clamp, u32 *pwroff, bool on,
+ 					int cpu)
+ {
+-	u32 pwroff;
+-
+-	memcpy(&pwroff, pwroff_ptr, sizeof(u32));
+-
+ 	if (on) {
+ 		/* Release power clamp */
+ 		clamp_release(clamp);
+ 
+ 		/* Clear power gating */
+-		clrbits_le32(&pwroff, BIT(cpu));
+		clrbits_le32(pwroff, BIT(cpu));
+ 	} else {
+ 		/* Set power gating */
+-		setbits_le32(&pwroff, BIT(cpu));
+		setbits_le32(pwroff, BIT(cpu));
+ 
+ 		/* Activate power clamp */
+ 		clamp_set(clamp);
+ 	}
+-
+-	memcpy(pwroff_ptr, &pwroff, sizeof(u32));
+ }
+ 
+ #ifdef CONFIG_MACH_SUN8I_R40
+-- 
+2.7.4
+
--- a/recipes-bsp/u-boot/u-boot-sunxi.bb
+++ b/recipes-bsp/u-boot/u-boot-sunxi.bb
@ -19,7 +19,7 @@ UBOOT_MACHINE_olinuxino-a10s = "A10s-OLinuXino-Micro_config"
 UBOOT_MACHINE_meleg = "Mele_A1000G_config"

 SRC_URI = " \
-	git://github.com/linux-sunxi/u-boot-sunxi.git;protocol=https;branch=sunxi \
+	git://github.com/linux-sunxi/u-boot-sunxi.git;protocol=git;branch=sunxi \
 	file://0001-gcc5-fixes.patch \
 	file://0002-gcc6-fixes.patch \
 	file://0003-No-gcc-version-specific-includes.patch \
--- a/recipes-bsp/u-boot/u-boot_%.bbappend
+++ b/recipes-bsp/u-boot/u-boot_%.bbappend
@ -1,30 +1,33 @@
-FILESEXTRAPATHS:prepend:sunxi := "${THISDIR}/files:"
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"

-DEPENDS:append:sunxi = " bc-native dtc-native swig-native python3-native flex-native bison-native "
-DEPENDS:append:sun50i = " atf-sunxi "
+DEPENDS += " bc-native dtc-native swig-native python3-native flex-native bison-native "
+DEPENDS_append_sun50i = " atf-sunxi "

-COMPATIBLE_MACHINE:sunxi = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"

-DEFAULT_PREFERENCE:sun4i = "1"
-DEFAULT_PREFERENCE:sun5i = "1"
-DEFAULT_PREFERENCE:sun7i = "1"
-DEFAULT_PREFERENCE:sun8i = "1"
-DEFAULT_PREFERENCE:sun50i = "1"
+DEFAULT_PREFERENCE_sun4i="1"
+DEFAULT_PREFERENCE_sun5i="1"
+DEFAULT_PREFERENCE_sun7i="1"
+DEFAULT_PREFERENCE_sun8i="1"
+DEFAULT_PREFERENCE_sun50i="1"

-SRC_URI:append:sunxi = " \
-        file://0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch \
-	file://0002-Added-nanopi-r1-board-support.patch \
-        file://boot.cmd \
-"
+SRC_URI += " \
+           file://0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch \
+           file://boot.cmd \
+           "
+# fix booting issue on orange pi zero
+SRC_URI_append_orange-pi-zero = " file://0002-Revert-sunxi-psci-avoid-error-address-of-packed-memb.patch"

-UBOOT_ENV_SUFFIX:sunxi = "scr"
-UBOOT_ENV:sunxi = "boot"
+SRC_URI_append_nanopi-neo = " file://0002-Revert-sunxi-psci-avoid-error-address-of-packed-memb.patch"

-EXTRA_OEMAKE:append:sunxi = ' HOSTLDSHARED="${BUILD_CC} -shared ${BUILD_LDFLAGS} ${BUILD_CFLAGS}" '
-EXTRA_OEMAKE:append:sun50i = " BL31=${DEPLOY_DIR_IMAGE}/bl31.bin "
+UBOOT_ENV_SUFFIX = "scr"
+UBOOT_ENV = "boot"
+
+EXTRA_OEMAKE += ' HOSTLDSHARED="${BUILD_CC} -shared ${BUILD_LDFLAGS} ${BUILD_CFLAGS}" '
+EXTRA_OEMAKE_append_sun50i = " BL31=${DEPLOY_DIR_IMAGE}/bl31.bin "

 do_compile_sun50i[depends] += "atf-sunxi:do_deploy"

-do_compile:append:sunxi() {
+do_compile_append() {
    ${B}/tools/mkimage -C none -A arm -T script -d ${WORKDIR}/boot.cmd ${WORKDIR}/${UBOOT_ENV_BINARY}
 }
--- a/recipes-devtools/python/pya20_0.2.12.bb
+++ b/recipes-devtools/python/pya20_0.2.12.bb
@ -15,7 +15,7 @@ S = "${WORKDIR}/pyA20-${PV}"

 inherit distutils3

-do_compile:prepend() { 
+do_compile_prepend() { 
 cp ${WORKDIR}/mapping.h ${S}/pyA20/gpio/mapping.h
 }

--- a/recipes-graphics/libgles/sunxi-mali_git.bb
+++ b/recipes-graphics/libgles/sunxi-mali_git.bb
@ -21,7 +21,7 @@ python __anonymous() {
        raise bb.parse.SkipPackage("%s-%s ONLY supports hardfp mode for now" % (pkgn, pkgv))
 }

-SRCREV = "d343311efc8db166d8371b28494f0f27b6a58724"
+SRCREV_pn-${PN} = "d343311efc8db166d8371b28494f0f27b6a58724"
 SRC_URI = "gitsm://github.com/linux-sunxi/sunxi-mali.git \
           file://0001-Add-EGLSyncKHR-EGLTimeKHR-and-GLChar-definition.patch \
           file://0002-Add-missing-GLchar-definition.patch \
@ -92,13 +92,13 @@ do_install() {
 # Packages like xf86-video-fbturbo dlopen() libUMP.so, so we do need to ship the .so files in ${PN}
 PACKAGES =+ "${PN}-test"

-RPROVIDES:${PN} += "libGLESv2.so libEGL.so libGLESv2.so libGLESv1_CM.so libMali.so"
-RDEPENDS:${PN}-test = "${PN}"
+RPROVIDES_${PN} += "libGLESv2.so libEGL.so libGLESv2.so libGLESv1_CM.so libMali.so"
+RDEPENDS_${PN}-test = "${PN}"

-FILES:${PN} += "${libdir}/lib*.so"
-FILES:${PN}-dev = "${includedir} ${libdir}/pkgconfig/*"
-FILES:${PN}-test = "${bindir}/sunximali-test"
+FILES_${PN} += "${libdir}/lib*.so"
+FILES_${PN}-dev = "${includedir} ${libdir}/pkgconfig/*"
+FILES_${PN}-test = "${bindir}/sunximali-test"

 # These are closed binaries generated elsewhere so don't check ldflags & text relocations
-INSANE_SKIP:${PN} = "dev-so ldflags textrel"
-INSANE_SKIP:${PN}-test = "dev-so ldflags textrel"
+INSANE_SKIP_${PN} = "dev-so ldflags textrel"
+INSANE_SKIP_${PN}-test = "dev-so ldflags textrel"
--- a/recipes-graphics/libump/libump_git.bb
+++ b/recipes-graphics/libump/libump_git.bb
@ -6,9 +6,9 @@ LIC_FILES_CHKSUM = "file://debian/copyright;md5=edf7fb6071cae7ec80d537a05ee17198
 inherit autotools

 PV = "r4p0-00rel0+git${SRCPV}"
-SRCREV = "ec0680628744f30b8fac35e41a7bd8e23e59c39f"
+SRCREV_pn-${PN} = "ec0680628744f30b8fac35e41a7bd8e23e59c39f"

-SRC_URI = "git://github.com/linux-sunxi/libump.git;protocol=https;branch=master"
+SRC_URI = "git://github.com/linux-sunxi/libump.git"

 S = "${WORKDIR}/git"

--- a/recipes-graphics/mesa/mesa_%.bbappend
+++ b/recipes-graphics/mesa/mesa_%.bbappend
@ -1,5 +1,5 @@
 # Enable lima and panfrost Mesa drivers
-PACKAGECONFIG:append:use-mailine-graphics = " lima panfrost"
+PACKAGECONFIG_append_use-mailine-graphics = " lima panfrost"
 # Enable KMS renderonly Mesa support
 # See https://cgit.freedesktop.org/mesa/mesa/commit/?id=2b780fe89300199f2334539aa1678e9b68f0434f
-GALLIUMDRIVERS:append:use-mailine-graphics = ",kmsro"
+GALLIUMDRIVERS_append_use-mailine-graphics = ",kmsro"
--- a/recipes-graphics/tslib/tslib_1.1.bbappend.disabled
+++ b/recipes-graphics/tslib/tslib_1.1.bbappend.disabled
@ -1,4 +1,4 @@
-FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"

 SRC_URI += "file://tslib.patch"

--- a/recipes-graphics/xorg-xserver/libdri2_git.bb
+++ b/recipes-graphics/xorg-xserver/libdri2_git.bb
@ -9,7 +9,7 @@ PE = "1"
 PV = "1.0.0+git${SRCPV}"
 SRC_URI = "git://github.com/robclark/libdri2.git;protocol=http;branch=master"

-SRCREV = "4f1eef3183df2b270c3d5cbef07343ee5127a6a4"
+SRCREV_pn-${PN} = "4f1eef3183df2b270c3d5cbef07343ee5127a6a4"

 S = "${WORKDIR}/git"

--- a/recipes-graphics/xorg-xserver/xf86-video-fbturbo_git.bb
+++ b/recipes-graphics/xorg-xserver/xf86-video-fbturbo_git.bb
@ -9,7 +9,7 @@ DEPENDS += "sunxi-mali libump xorgproto"

 PE = "3"
 PV = "0.5.1+git${SRCPV}"
-SRCREV = "e094e3c8f9004ca3347694bd05b99d136e8621b9"
+SRCREV_pn-${PN} = "e094e3c8f9004ca3347694bd05b99d136e8621b9"

 SRC_URI = "git://github.com/ssvb/xf86-video-fbturbo.git;protocol=http;branch=master \
           file://20-fbturbo.conf"
@ -18,9 +18,9 @@ S = "${WORKDIR}/git"

 CFLAGS += " -I${STAGING_INCDIR}/xorg "

-do_install:append() {
+do_install_append() {
    install -d ${D}${datadir}/X11/xorg.conf.d
    install -m 0644 ${WORKDIR}/20-fbturbo.conf ${D}${datadir}/X11/xorg.conf.d
 }

-FILES:${PN} += "${datadir}/X11/xorg.conf.d/20-fbturbo.conf"
+FILES_${PN} += "${datadir}/X11/xorg.conf.d/20-fbturbo.conf"
--- a/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
+++ b/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
@ -1 +1 @@
-FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
--- a/recipes-kernel/linux-firmware/linux-firmware_%.bbappend
+++ b/recipes-kernel/linux-firmware/linux-firmware_%.bbappend
@ -6,7 +6,7 @@
 # WARNING: The following commit is required for NVRAM files to be included in
 # linux-firmware-bcm43430 package:
 # http://git.openembedded.org/openembedded-core/commit/?id=dde0f79f32fa6bab045ef60199903f74c4cc3393
-do_install:append() {
+do_install_append() {
 	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2.txt
 	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2-h3.txt
 	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt
--- a/recipes-kernel/linux/linux-mainline.inc
+++ b/recipes-kernel/linux/linux-mainline.inc
@ -21,13 +21,12 @@ KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
 S = "${WORKDIR}/linux-${PV}"

 SRC_URI = "https://www.kernel.org/pub/linux/kernel/v5.x/linux-${PV}.tar.xz \
+	file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
 	file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
-	file://0002-ARM-dts-sun8i-h3-Add-initial-NanoPi-R1-support.patch \
 	file://defconfig \
 "

-SRC_URI:append:use-mailine-graphics = " file://drm.cfg"
-SRC_URI:append:bananapi = " file://axp20x.cfg"
-SRC_URI:append:cubietruck = " file://axp20x.cfg"
+SRC_URI_append_use-mailine-graphics = " file://drm.cfg"
+SRC_URI_append_bananapi = " file://axp20x.cfg"

-FILES_${KERNEL_PACKAGE_NAME}-base:append = " ${nonarch_base_libdir}/modules/${KERNEL_VERSION}/modules.builtin.modinfo"
+FILES_${KERNEL_PACKAGE_NAME}-base_append = " ${nonarch_base_libdir}/modules/${KERNEL_VERSION}/modules.builtin.modinfo"
--- a/recipes-kernel/linux/linux-mainline/0002-ARM-dts-sun8i-h3-Add-initial-NanoPi-R1-support.patch
+++ b/recipes-kernel/linux/linux-mainline/0002-ARM-dts-sun8i-h3-Add-initial-NanoPi-R1-support.patch
@ -1,236 +0,0 @@
-From 692c8efb60d033fa0df3d79d4aee6e3e1d966425 Mon Sep 17 00:00:00 2001
-From: Marek Belisko <marek.belisko@open-nandra.com>
-Date: Wed, 13 Apr 2022 11:19:29 +0200
-Subject: [PATCH] ARM: dts: sun8i: h3: Add initial NanoPi R1 support
-
-The NanoPi R1 is a complete open source board developed
-by FriendlyElec for makers, hobbyists, fans and etc.
-
-NanoPi R1 key features
- Allwinner H3, Quad-core Cortex-A7@1.2GHz
- 512MB/1GB DDR3 RAM
- 8GB eMMC
- microSD slot
- 10/100/1000M Ethernet x 1
- 10/100 Ethernet x 1
- Wifi 802.11b/g/n
- Bluetooth 4.0
- Serial Debug Port
- 5V 2A DC power-supply
-
-Signed-off-by: Yu-Tung Chang <mtwget@gmail.com>
-Signed-off-by: Maxime Ripard <maxime@cerno.tech>
-Link: https://lore.kernel.org/r/20201102100157.85801-2-mtwget@gmail.com
---
- Documentation/devicetree/bindings/arm/sunxi.yaml |   5 +
- arch/arm/boot/dts/Makefile                       |   1 +
- arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts         | 169 +++++++++++++++++++++++
- 3 files changed, 175 insertions(+)
- create mode 100644 arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
-
-diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml
-index cab8e1b..5424bab 100644
--- a/Documentation/devicetree/bindings/arm/sunxi.yaml
-+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml
-@@ -251,6 +251,11 @@ properties:
-           - const: friendlyarm,nanopi-neo-plus2
-           - const: allwinner,sun50i-h5
- 
-+      - description: FriendlyARM NanoPi R1
-+        items:
-+          - const: friendlyarm,nanopi-r1
-+          - const: allwinner,sun8i-h3
-+
-       - description: Gemei G9 Tablet
-         items:
-           - const: gemei,g9
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 4c3ba04..494639a 100644
--- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -1240,6 +1240,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
- 	sun8i-h3-nanopi-m1-plus.dtb \
- 	sun8i-h3-nanopi-neo.dtb \
- 	sun8i-h3-nanopi-neo-air.dtb \
-+	sun8i-h3-nanopi-r1.dtb \
- 	sun8i-h3-orangepi-2.dtb \
- 	sun8i-h3-orangepi-lite.dtb \
- 	sun8i-h3-orangepi-one.dtb \
-diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
-new file mode 100644
-index 0000000..204a39f
--- /dev/null
-+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-r1.dts
-@@ -0,0 +1,169 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+/*
-+ * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
-+ * Copyright (C) 2020 Jayantajit Gogoi <jayanta.gogoi525@gmail.com>
-+ * Copyright (C) 2020 Yu-Tung Chang <mtwget@gmail.com>
-+*/
-+
-+#include "sun8i-h3-nanopi.dtsi"
-+#include <dt-bindings/leds/common.h>
-+
-+/ {
-+	model = "FriendlyARM NanoPi R1";
-+	compatible = "friendlyarm,nanopi-r1", "allwinner,sun8i-h3";
-+
-+	aliases {
-+		serial1 = &uart1;
-+		ethernet0 = &emac;
-+		ethernet1 = &wifi;
-+	};
-+
-+	reg_gmac_3v3: gmac-3v3 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "gmac-3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		startup-delay-us = <100000>;
-+		enable-active-high;
-+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
-+	};
-+
-+	reg_vdd_cpux: gpio-regulator {
-+		compatible = "regulator-gpio";
-+		regulator-name = "vdd-cpux";
-+		regulator-type = "voltage";
-+		regulator-boot-on;
-+		regulator-always-on;
-+		regulator-min-microvolt = <1100000>;
-+		regulator-max-microvolt = <1300000>;
-+		regulator-ramp-delay = <50>;
-+		gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
-+		gpios-states = <0x1>;
-+		states = <1100000 0x0
-+			  1300000 0x1>;
-+	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-+		clocks = <&rtc 1>;
-+		clock-names = "ext_clock";
-+	};
-+
-+	leds {
-+		led-2 {
-+			function = LED_FUNCTION_WAN;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>; /* PG11 */
-+		};
-+
-+		led-3 {
-+			function = LED_FUNCTION_LAN;
-+			color = <LED_COLOR_ID_GREEN>;
-+			gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>; /* PA9 */
-+		};
-+	};
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&reg_vdd_cpux>;
-+};
-+
-+&ehci1 {
-+	status = "okay";
-+};
-+
-+&ehci2 {
-+	status = "okay";
-+};
-+
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&emac_rgmii_pins>;
-+	phy-supply = <&reg_gmac_3v3>;
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-mode = "rgmii-id";
-+	status = "okay";
-+};
-+
-+&external_mdio {
-+	ext_rgmii_phy: ethernet-phy@7 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <7>;
-+	};
-+};
-+
-+&mmc1 {
-+	vmmc-supply = <&reg_vcc3v3>;
-+	vqmmc-supply = <&reg_vcc3v3>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	wifi: wifi@1 {
-+		reg = <1>;
-+		compatible = "brcm,bcm4329-fmac";
-+		interrupt-parent = <&pio>;
-+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
-+		interrupt-names = "host-wake";
-+	};
-+};
-+
-+&mmc2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc2_8bit_pins>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	vqmmc-supply = <&reg_vcc3v3>;
-+	bus-width = <8>;
-+	non-removable;
-+	status = "okay";
-+};
-+
-+&ohci1 {
-+	status = "okay";
-+};
-+
-+&ohci2 {
-+	status = "okay";
-+};
-+
-+&reg_usb0_vbus {
-+	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
-+	status = "okay";
-+};
-+
-+&uart1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart1_pins>;
-+	status = "okay";
-+};
-+
-+&uart3 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart3_pins>, <&uart3_rts_cts_pins>;
-+	uart-has-rtscts;
-+	status = "okay";
-+
-+	bluetooth {
-+		compatible = "brcm,bcm43438-bt";
-+		clocks = <&rtc 1>;
-+		clock-names = "lpo";
-+		vbat-supply = <&reg_vcc3v3>;
-+		vddio-supply = <&reg_vcc3v3>;
-+		device-wakeup-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */
-+		host-wakeup-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA7 */
-+		shutdown-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
-+	};
-+};
-+
-+&usb_otg {
-+	status = "okay";
-+	dr_mode = "otg";
-+};
-+
-+&usbphy {
-+	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
-+	usb0_vbus-supply = <&reg_usb0_vbus>;
-+	status = "okay";
-+};
-- 
-2.7.4
-
--- a/recipes-kernel/linux/linux-mainline/0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch
+++ b/recipes-kernel/linux/linux-mainline/0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch
@ -0,0 +1,80 @@
+From 4ca766a768e783ee5198f1935b7f46a5df9b4a35 Mon Sep 17 00:00:00 2001
+From: Jelle van der Waa <jelle@vdwaa.nl>
+Date: Tue, 23 Jan 2018 15:58:44 -0800
+Subject: [PATCH] ARM: dts: nanopi-neo-air: Add WiFi / eMMC
+
+Enable the WiFi (AP6212) chip and eMMC support for the NanoPi NEO Air.
+
+This patch was originally submitted by Jelle van der Waa. Martin Kelly
+modified it to compile on the latest kernel, fixed up some review
+comments from Maxime Ripard, and re-tested the patch.
+
+The patch has been reworked to add back eMMC support which has been left
+out at the last backport.
+
+Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
+Cc: linux-sunxi@googlegroups.com
+Cc: devicetree@vger.kernel.org
+Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
+Signed-off-by: Martin Kelly <mkelly@xevo.com>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+Signed-off-by: Florin Sarbu <florin@resin.io>
+---
+ arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts | 34 +++++++++++++++++++++++++++
+ 1 file changed, 34 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+index 03ff6f8..a9331fe 100644
+--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+@@ -72,6 +72,11 @@
+ 			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+ 		};
+ 	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+	};
+ };
+ 
+ &mmc0 {
+@@ -84,6 +89,35 @@
+ 	status = "okay";
+ };
+ 
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+ &uart0 {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&uart0_pins_a>;
+-- 
+2.11.0
+
--- a/recipes-kernel/linux/linux-mainline/aarch64/defconfig
+++ b/recipes-kernel/linux/linux-mainline/aarch64/defconfig
@ -339,7 +339,6 @@ CONFIG_MFD_MAX77620=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_RK808=y
 CONFIG_MFD_SEC_CORE=y
-CONFIG_REGULATOR=y
 CONFIG_REGULATOR_AXP20X=y
 CONFIG_REGULATOR_FAN53555=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
--- a/recipes-kernel/linux/linux-mainline/drm.cfg
+++ b/recipes-kernel/linux/linux-mainline/drm.cfg
@ -2,7 +2,6 @@ CONFIG_DRM=y
 CONFIG_DRM_SUN4I=y
 CONFIG_DRM_SUN8I_DW_HDMI=y
 CONFIG_DRM_SUN8I_MIXER=y
-CONFIG_IOMMU_SUPPORT=y
 CONFIG_DRM_LIMA=y
 CONFIG_DRM_PANFROST=y
 CONFIG_CMA=y
--- a/recipes-kernel/linux/linux-mainline_4.19.186.bb
+++ b/recipes-kernel/linux/linux-mainline_4.19.186.bb
@ -0,0 +1,32 @@
+SECTION = "kernel"
+DESCRIPTION = "Mainline Longterm Linux kernel"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
+
+inherit kernel
+
+require linux.inc
+
+# Since we're not using git, this doesn't make a difference, but we need to fill
+# in something or kernel-yocto.bbclass will fail.
+KBRANCH ?= "master"
+
+# Pull in the devicetree files into the rootfs
+RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"
+
+KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
+
+S = "${WORKDIR}/linux-${PV}"
+
+SRC_URI[md5sum] = "dfb4db3d95bdcd8114281e32eb0be5cd"
+SRC_URI[sha256sum] = "d8c5d7844214510e85ceb9f5236f27f63fc03535a143f3aaa0c1677a8f92e631"
+
+SRC_URI = "https://www.kernel.org/pub/linux/kernel/v4.x/linux-${PV}.tar.xz \
+        file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
+        file://defconfig \
+        "
+
+SRC_URI_append_orange-pi-zero += "\
+	file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
+	"
--- a/recipes-kernel/linux/linux-mainline_5.10.2.bb
+++ b/recipes-kernel/linux/linux-mainline_5.10.2.bb
@ -1,8 +0,0 @@
-require linux-mainline.inc
-
-DESCRIPTION = "Mainline Longterm Linux kernel"
-
-LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46"
-
-SRC_URI[md5sum] = "0751179f60de73eb2cd93f161fa52fcf"
-SRC_URI[sha256sum] = "3b84e13abae26af17ebccc4d7212f5843a991127a73a320848d5c6942ef781a2"
--- a/recipes-kernel/linux/linux-mainline_5.4.111.bb
+++ b/recipes-kernel/linux/linux-mainline_5.4.111.bb
@ -0,0 +1,6 @@
+require linux-mainline.inc
+
+DESCRIPTION = "Mainline Longterm Linux kernel"
+
+SRC_URI[md5sum] = "a3820e9aa56af51c0331b7f427e6f71b"
+SRC_URI[sha256sum] = "21626132658dc34cb41b7aa7b80ecf83751890a71ac1a63d77aea9d488271a03"
--- a/recipes-kernel/linux/linux-mainline_5.4.69.bb
+++ b/recipes-kernel/linux/linux-mainline_5.4.69.bb
@ -1,8 +0,0 @@
-require linux-mainline.inc
-
-DESCRIPTION = "Mainline Longterm Linux kernel"
-
-LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
-
-SRC_URI[md5sum] = "98c8187b801f006ba203db0669e307a5"
-SRC_URI[sha256sum] = "a8b31d716b397303a183e42ad525ff2871024a43e3ea530d0fdf73b7f9d27da7"
--- a/recipes-kernel/linux/linux-mainline_5.5.3.bb
+++ b/recipes-kernel/linux/linux-mainline_5.5.3.bb
@ -0,0 +1,6 @@
+require linux-mainline.inc
+
+DESCRIPTION = "Mainline Stable Linux kernel"
+
+SRC_URI[md5sum] = "3ea50025d8c679a327cf2fc225d81a46"
+SRC_URI[sha256sum] = "2bef3edcf44c746383045f4a809b2013e18c52319c827875ed8e89138951cab2"
--- a/recipes-kernel/linux/linux-sunxi_3.4.bb
+++ b/recipes-kernel/linux/linux-sunxi_3.4.bb
@ -3,15 +3,15 @@ require linux.inc
 DESCRIPTION = "Linux kernel for Allwinner a10/a20 processors"

 COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
-RDEPENDS:${PN} += "sunxi-board-fex"
+RDEPENDS_${PN} += "sunxi-board-fex"

 PV = "3.4.104"
 PR = "r1"
-SRCREV = "d47d367036be38c5180632ec8a3ad169a4593a88"
+SRCREV_pn-${PN} = "d47d367036be38c5180632ec8a3ad169a4593a88"

-MACHINE_KERNEL_PR:append = "a"
+MACHINE_KERNEL_PR_append = "a"

-SRC_URI += "git://github.com/linux-sunxi/linux-sunxi.git;branch=sunxi-3.4;protocol=https \
+SRC_URI += "git://github.com/linux-sunxi/linux-sunxi.git;branch=sunxi-3.4;protocol=git \
        file://0001-compiler-gcc-integrate-the-various-compiler-gcc-345-.patch \
        file://0002-use-static-inline-in-ARM-ftrace.patch \
        file://0003-gcc5-fixes.patch \
@ -26,7 +26,7 @@ S = "${WORKDIR}/git"
 #fix QA issue "Files/directories were installed but not shipped: /usr/src/debug"
 INHIBIT_PACKAGE_DEBUG_SPLIT = "1"

-do_configure:prepend() {
+do_configure_prepend() {
    #fix arch QA issues ("Architecture did not match")
    rm -f ${S}/drivers/net/wireless/rtxx7x/tools/bin2h
    rm -f ${S}/modules/wifi/ar6302/AR6K_SDK_ISC.build_3.1_RC.329/host/lib/wac/wac
--- a/recipes-kernel/linux/linux.inc
+++ b/recipes-kernel/linux/linux.inc
@ -39,7 +39,7 @@ do_kernel_configme[depends] += "virtual/${TARGET_PREFIX}binutils:do_populate_sys
 do_kernel_configme[depends] += "virtual/${TARGET_PREFIX}gcc:do_populate_sysroot"
 do_kernel_configme[depends] += "bc-native:do_populate_sysroot bison-native:do_populate_sysroot"

-do_configure:prepend() {
+do_configure_prepend() {
    CONF_SED_SCRIPT=""

    #
@ -118,9 +118,15 @@ do_configure:prepend() {
    yes '' | oe_runmake -C ${S} O=${B} oldconfig
 }

-do_configure:append() {
+do_configure_append() {
    if test -e scripts/Makefile.fwinst ; then
        sed -i -e "s:-m0644:-m 0644:g" scripts/Makefile.fwinst
    fi
 }

+do_install_append() {
+    oe_runmake headers_install INSTALL_HDR_PATH=${D}${exec_prefix}/src/linux-${KERNEL_VERSION} ARCH=$ARCH
+}
+
+PACKAGES =+ "kernel-headers"
+FILES_kernel-headers = "${exec_prefix}/src/linux*"
--- a/recipes-kernel/xradio-firmware/xradio-firmware.bb
+++ b/recipes-kernel/xradio-firmware/xradio-firmware.bb
@ -20,6 +20,6 @@ do_install() {
    install -m 0644 ${S}/xr819/fw_xr819.bin ${D}${base_libdir}/firmware/xr819/
 }

-FILES:${PN} = "${base_libdir}/*"
+FILES_${PN} = "${base_libdir}/*"

 PACKAGES = "${PN}"
--- a/recipes-kernel/xradio/xradio.bb
+++ b/recipes-kernel/xradio/xradio.bb
@ -7,7 +7,7 @@ inherit module
 PV = "0.1"
 PR = "r0"

-RDEPENDS:${PN} += "xradio-firmware"
+RDEPENDS_${PN} += "xradio-firmware"

 COMPATIBLE_MACHINE = "orange-pi-zero"

--- a/recipes-multimedia/gstreamer/gst-plugin-cedar_git.bb
+++ b/recipes-multimedia/gstreamer/gst-plugin-cedar_git.bb
@ -10,14 +10,14 @@ inherit autotools pkgconfig
 # 0.10.1 Initial Import
 SRCREV = "908987a74d341be1376895023698667892fe5569"

-SRC_URI = "git://github.com/ebutera/gst-plugin-cedar.git;protocol=https;branch=master"
+SRC_URI = "git://github.com/ebutera/gst-plugin-cedar.git"

 PV = "0.10.1+git${SRCPV}"
 PR = "r1"

 S = "${WORKDIR}/git"

-FILES:${PN} += "${libdir}/gstreamer-0.10/*.so"
-FILES:${PN}-dbg += "${libdir}/gstreamer-0.10/.debug"
-FILES:${PN}-dev += "${libdir}/gstreamer-0.10/*.la"
-FILES:${PN}-staticdev += "${libdir}/gstreamer-0.10/*.a"
+FILES_${PN} += "${libdir}/gstreamer-0.10/*.so"
+FILES_${PN}-dbg += "${libdir}/gstreamer-0.10/.debug"
+FILES_${PN}-dev += "${libdir}/gstreamer-0.10/*.la"
+FILES_${PN}-staticdev += "${libdir}/gstreamer-0.10/*.a"
--- a/recipes-support/sunxi-tools/sunxi-tools_git.bb
+++ b/recipes-support/sunxi-tools/sunxi-tools_git.bb
@ -7,7 +7,7 @@ PR = "r0"

 DEPENDS += "libusb"

-SRC_URI = "git://github.com/linux-sunxi/sunxi-tools;protocol=https;branch=master"
+SRC_URI = "git://github.com/linux-sunxi/sunxi-tools;protocol=git"
 SRCREV = "9a3d62aa0c820b3dd42ba3409b2043f4143683cd"

 inherit pkgconfig
@ -16,7 +16,7 @@ S = "${WORKDIR}/git"

 BBCLASSEXTEND = "native nativesdk"

-FILES:${PN} = "${bindir}/*"
+FILES_${PN} = "${bindir}/*"

 CFLAGS = "-std=c99 -D_POSIX_C_SOURCE=200112L -I./include"
 CFLAGS_class-native = "-std=c99 -D_POSIX_C_SOURCE=200112L -I./include"
--- a/wic/sunxi-sdcard-image.wks.in
+++ b/wic/sunxi-sdcard-image.wks.in
@ -1,18 +0,0 @@
-# short-description: Create SD card image with a boot partition
-# long-description:
-# Create an image that can be written onto a SD card using dd for use
-# with Allwinner arm (32-bit) SoC family
-#
-# The disk layout used is:
-#  - --------------------------- -------------- --------------
-# | | u-boot-sunxi-with-spl.bin |     boot     |    rootfs    |
-#  - --------------------------- -------------- --------------
-# ^ ^                           ^              ^              ^
-# | |                           |              |              |
-# 0 |                         2MiB  ${SUNXI_BOOT_SPACE}MiB  ${SUNXI_BOOT_SPACE}MiB + rootfs + IMAGE_EXTRA_SPACE
-#   8KiB 
-#
-
-part u-boot --source rawcopy --sourceparams="file=${SPL_BINARY}" --ondisk mmcblk0 --no-table --align 8
-part /boot --source bootimg-partition --ondisk mmcblk0 --fstype=vfat --label boot --active --align 2048 --fixed-size ${SUNXI_BOOT_SPACE}
-part /     --source rootfs --ondisk mmcblk0 --fstype=ext4 --align 2048
Author	SHA1	Message	Date
Marek Belisko	06091fa58f	Merge pull request #339 from grzegorzheldt/dunfell Fix nanopi-neo booting on Dunfell	2022-02-12 20:10:03 +01:00
Grzegorz Heldt	fd122b2ef1	Fix nanopi-neo booting on Dunfell Same as #314, without this patch booting ends with Starting kernel ...	2022-02-12 19:52:12 +01:00
Marek Belisko	f367a1ff2c	xradio-firmware: Update to latest master Old version seems to have random crashes when using softap functionality Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>	2021-06-30 11:10:02 +02:00
Marek Belisko	7b7c64f8ef	Added support for bananapi-m64 machine Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>	2021-06-30 11:09:57 +02:00
Marek Belisko	a3848d2e23	Merge pull request #323 from MitchGaines/opi-plus2e-machine Orange Pi Plus 2E Machine Configuration	2021-06-23 16:51:41 +02:00
MitchGaines	eae1cd6122	machine added	2021-06-23 09:28:43 -04:00
Marius Kriegerowski	91ddc99c98	default to 'boot' as boot partition label Defaulting to the $MACHINE may lead to failure if the name was longer than the limit of allowed volume label of fat (11 chars). Signed-off-by: Marius Kriegerowski <marius.kriegerowski@gmail.com>	2021-05-17 13:30:28 +02:00
Marek Belisko	ea508b4f10	Merge pull request #316 from linux-sunxi/mbe-dunfell Misc fixes	2021-04-17 09:39:17 +02:00
Marek Belisko	e76d39e3d2	linux-mainline: Bump to 4.x and 5.x to lastest stable releases Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>	2021-04-13 15:58:03 +02:00
Marek Belisko	a1a6504789	Added bananapi-m2m machine Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>	2021-04-13 13:17:57 +02:00
Marek Belisko	c47c7dcc61	u-boot: Fix orange-pi-zero booting Without this patch booting ends with Starting kernel ... Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>	2021-03-30 21:53:22 +02:00
Marek Belisko	b1db4fbfc7	Merge pull request #304 from mfrydrysiak/dunfell-m2plus conf: machine: add bananapi-m2plus	2020-11-12 11:49:18 +01:00
Marek Frydrysiak	e4d5c7323e	conf: machine: add bananapi-m2plus Add machine configuration for H3 based Banana Pi M2+. Signed-off-by: Marek Frydrysiak <marek.frydrysiak@gmail.com>	2020-11-11 16:44:08 +01:00
Marek Belisko	37bfb7c8cd	xradio: Use updated driver from armbian Current xradio driver have an issue that with 5.x kernel doesn't work properly. Bump it to more maintained one which support also 5.x kernel. Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>	2020-10-15 19:51:21 +02:00
Marek Belisko	648484cd2c	Merge pull request #296 from Kynetics/dunfell linux-mainline: update to lt 5.4.69	2020-10-01 20:00:39 +02:00
Diego Rondini	296735769d	linux-mainline: update to lt 5.4.69 Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>	2020-10-01 16:55:48 +00:00
Marek Belisko	f3243b56d2	xradio: Bump revision to have it compilable with later 5.x kernel Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>	2020-09-18 10:43:53 +02:00
Marek Belisko	8b7ee077bf	Merge pull request #291 from Kynetics/dunfell Revert "u-boot: rebase patch against v2020.04"	2020-06-25 21:30:02 +02:00
Diego Rondini	6787fdcc4a	Revert "u-boot: rebase patch against v2020.04" This reverts commit `ebde1a411c`. Dunfell uses U-Boot 2020.01, so this patch shouldn't be applied in the dunfell branch. Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>	2020-06-19 12:38:08 +00:00
Marek Belisko	56bfc99b03	linux-mainline: Added fix for bananapi Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>	2020-06-01 08:44:07 +02:00
Jonathan Liu	ebde1a411c	u-boot: rebase patch against v2020.04 Signed-off-by: Jonathan Liu <net147@gmail.com>	2020-06-01 08:44:02 +02:00