conf: added sunxi and sunxi64 machine overrides.

fixing missing 'compatible' property in reg_vcc_wifi node
linux: refresh orange-pi-zero wifi patch
2025-07-16 13:59:46 +02:00 · 2020-11-23 08:19:02 +01:00 · 2020-02-10 19:57:09 +01:00 · 2020-02-10 19:56:57 +01:00 · 2019-09-07 22:43:19 +02:00 · 2019-09-07 22:43:08 +02:00
48 changed files with 205 additions and 231 deletions
--- a/README.md
+++ b/README.md
@ -19,36 +19,24 @@ Maintainers:
 Kernel / U-Boot Version
 ===========
 Most Allwinner devices and hardware are supported in mainline kernel and U-Boot, so this layer builds mainline by default.
-
-Legacy sunxi Kernel / U-Boot
-----------
-
 There is a custom U-Boot and Kernel version for sunxi devices which includes some special drivers not mainlined.
-These versions are rather old (3.4 for kernel and 2014.04 for U-Boot), but may support more functions and devices than current mainline.
+These versions are rather old (3.4 for kernel and 2014.04 for U-Boot), but may support more functions and devices than current mainline

 If you want to switch back to sunxi versions for some reasons (no device tree available, unsupported hardware), either:
 - change the file conf/machine/include/sunxi.inc to include the following block
 - edit your conf/local.conf to add the following block

-		PREFERRED_PROVIDER_u-boot="u-boot-sunxi"
-		PREFERRED_PROVIDER_virtual/bootloader="u-boot-sunxi"
-		PREFERRED_PROVIDER_virtual/kernel="linux-sunxi"
-		KERNEL_DEVICETREE = ""
+	PREFERRED_PROVIDER_u-boot="u-boot-sunxi"
+	PREFERRED_PROVIDER_virtual/bootloader="u-boot-sunxi"
+	PREFERRED_PROVIDER_virtual/kernel="linux-sunxi"

 If you already have built the mainline versions it might be necessary to reset the build directories with:

 	bitbake -c clean virtual/kernel virtual/bootloader

-Mainline Kernel / U-Boot
-----------
-
-For mainline kernel we have now support for latest LTS and stable.
+For mainline kernel we have now support for latest LTS, stable and bleeding edge (latest possible rc).
 By default we use latest LTS. If you would like to change version please update ```PREFERRED_VERSION_linux-mainline``` in:
-* [conf/machine/include/sunxi.inc](https://github.com/linux-sunxi/meta-sunxi/blob/fa0846c0eb23e3424b89acb4d5a327e921f73497/conf/machine/include/sunxi.inc#L16)
-
-When using mainline kernel ≥ 5.2 it is now possible to use the mainline graphics drivers *lima* and *panfrost*, instead of the *mali* driver provided by ARM. To enable open source mainline graphics support add the following line in your `local.conf`:
-
-    MACHINEOVERRIDES .= ":use-mailine-graphics"
+* [conf/machine/include/sunxi.inc](https://github.com/linux-sunxi/meta-sunxi/blob/4921234ed77f9df77c65c88637ce50468f65bde7/conf/machine/include/sunxi.inc#L16)

 Performance
 ===========
--- a/classes/sdcard_image-sunxi.bbclass
+++ b/classes/sdcard_image-sunxi.bbclass
@ -94,10 +94,6 @@ IMAGE_CMD_sunxi-sdimg () {
 	then
 		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/boot.scr ::boot.scr
 	fi
-        if [ -e "${DEPLOY_DIR_IMAGE}/splash.bmp" ]
-        then
-                mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/splash.bmp ::splash.bmp
-        fi


 	# Add stamp file
--- a/conf/layer.conf
+++ b/conf/layer.conf
@ -14,4 +14,4 @@ LAYERVERSION_meta-sunxi = "1"

 LAYERDEPENDS_meta-sunxi = "core openembedded-layer"

-LAYERSERIES_COMPAT_meta-sunxi = "zeus dunfell"
+LAYERSERIES_COMPAT_meta-sunxi = "morty pyro rocko sumo thud warrior"
--- a/conf/machine/include/hardware/ap6212a.inc
+++ b/conf/machine/include/hardware/ap6212a.inc
@ -1,5 +0,0 @@
-# Include for boards with AMPAK 6212A Wifi / Bluetooth module
-# https://linux-sunxi.org/Wifi#Ampak
-
-MACHINE_EXTRA_RRECOMMENDS_append = " kernel-module-brcmfmac"
-MACHINE_EXTRA_RDEPENDS_append = " linux-firmware-bcm43430"
--- a/conf/machine/include/sun50i.inc
+++ b/conf/machine/include/sun50i.inc
@ -1,6 +1,4 @@
 require conf/machine/include/sunxi64.inc
-
-DEFAULTTUNE ?= "cortexa53-crypto"
-require conf/machine/include/tune-cortexa53.inc
+require conf/machine/include/arm/arch-armv8a.inc

 SOC_FAMILY = "sun50i"
--- a/conf/machine/include/sunxi-mali-driver.inc
+++ b/conf/machine/include/sunxi-mali-driver.inc
@ -1,15 +0,0 @@
-PREFERRED_PROVIDER_virtual/mesa ?= "mesa-gl"
-PREFERRED_PROVIDER_virtual/libgl ?= "mesa-gl"
-PREFERRED_PROVIDER_virtual/libgles1 ?= "sunxi-mali"
-PREFERRED_PROVIDER_virtual/libgles2 ?= "sunxi-mali"
-PREFERRED_PROVIDER_virtual/egl ?= "sunxi-mali"
-
-PACKAGECONFIG_remove_pn-xserver-xorg = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'glamor', '', d)}"
-
-XSERVER += "sunxi-mali \
-            sunxi-mali-dev"
-
-MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "\
- kernel-module-mali \
- kernel-module-mali-drm \
-  "
--- a/conf/machine/include/sunxi-mali.inc
+++ b/conf/machine/include/sunxi-mali.inc
@ -1,5 +1,15 @@
-# The "sunxi-mailine-graphics-drivers.inc" doesn't exist, but it can be created
-# in the future if needed.  Using include directive ensures build doesn't fail
-# if .inc file doesn't exist:
-# https://www.yoctoproject.org/pipermail/yocto/2019-August/046484.html
-include ${@'sunxi-mali-driver.inc' if 'use-mailine-graphics' not in d.getVar("MACHINEOVERRIDES").split(":") else 'sunxi-mailine-graphics-drivers.inc' }
+PREFERRED_PROVIDER_virtual/mesa ?= "mesa-gl"
+PREFERRED_PROVIDER_virtual/libgl ?= "mesa-gl"
+PREFERRED_PROVIDER_virtual/libgles1 ?= "sunxi-mali"
+PREFERRED_PROVIDER_virtual/libgles2 ?= "sunxi-mali"
+PREFERRED_PROVIDER_virtual/egl ?= "sunxi-mali"
+
+PACKAGECONFIG_remove_pn-xserver-xorg = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'glamor', '', d)}"
+
+XSERVER += "sunxi-mali \
+            sunxi-mali-dev"
+
+MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "\
+ kernel-module-mali \
+ kernel-module-mali-drm \
+  "
--- a/conf/machine/include/sunxi.inc
+++ b/conf/machine/include/sunxi.inc
@ -1,6 +1,8 @@
 SOC_FAMILY ??= ""
 include conf/machine/include/soc-family.inc

+MACHINEOVERRIDES =. "sunxi:"
+
 # Sub-architecture support
 MACHINE_SOCARCH_SUFFIX ?= ""
 MACHINE_SOCARCH_SUFFIX_sun4i = "-sun4i"
@ -13,7 +15,7 @@ XSERVER = "xserver-xorg \
           xf86-input-keyboard"

 PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
-PREFERRED_VERSION_linux-mainline ?= "5.4.%"
+PREFERRED_VERSION_linux-mainline ?= "4.19%"
 PREFERRED_PROVIDER_u-boot ?= "u-boot"
 PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"

--- a/conf/machine/include/sunxi64.inc
+++ b/conf/machine/include/sunxi64.inc
@ -1,6 +1,8 @@
 SOC_FAMILY ??= ""
 include conf/machine/include/soc-family.inc

+MACHINEOVERRIDES =. "sunxi:sunxi64:"
+
 PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
 PREFERRED_PROVIDER_u-boot ?= "u-boot"
 PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
--- a/conf/machine/nanopi-m1-plus.conf
+++ b/conf/machine/nanopi-m1-plus.conf
@ -4,6 +4,8 @@

 require conf/machine/include/sun8i.inc

+PREFERRED_VERSION_u-boot = "v2018.09%"
+
 KERNEL_DEVICETREE = "sun8i-h3-nanopi-m1-plus.dtb"
 UBOOT_MACHINE = "nanopi_m1_plus_defconfig"

--- a/conf/machine/nanopi-neo-air.conf
+++ b/conf/machine/nanopi-neo-air.conf
@ -5,5 +5,7 @@

 require conf/machine/include/sun8i.inc

+PREFERRED_VERSION_u-boot = "v2018.09%"
+
 KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo-air.dtb"
 UBOOT_MACHINE = "nanopi_neo_air_defconfig"
--- a/conf/machine/nanopi-neo-plus2.conf
+++ b/conf/machine/nanopi-neo-plus2.conf
@ -4,7 +4,8 @@
 # on the Allwinner H5 SoC.

 require conf/machine/include/sun50i.inc
-require conf/machine/include/hardware/ap6212a.inc
+
+PREFERRED_VERSION_u-boot = "v2018.09%"

 KERNEL_DEVICETREE = "allwinner/sun50i-h5-nanopi-neo-plus2.dtb"
 UBOOT_MACHINE = "nanopi_neo_plus2_defconfig"
--- a/conf/machine/nanopi-neo.conf
+++ b/conf/machine/nanopi-neo.conf
@ -4,6 +4,8 @@

 require conf/machine/include/sun8i.inc

+PREFERRED_VERSION_u-boot = "v2018.09%"
+
 KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo.dtb"
 UBOOT_MACHINE = "nanopi_neo_defconfig"

--- a/conf/machine/nanopi-neo2.conf
+++ b/conf/machine/nanopi-neo2.conf
@ -5,5 +5,7 @@

 require conf/machine/include/sun50i.inc

+PREFERRED_VERSION_u-boot = "v2018.09%"
+
 KERNEL_DEVICETREE = "allwinner/sun50i-h5-nanopi-neo2.dtb"
 UBOOT_MACHINE = "nanopi_neo2_defconfig"
--- a/conf/machine/olinuxino-a64.conf
+++ b/conf/machine/olinuxino-a64.conf
@ -7,7 +7,5 @@ require conf/machine/include/sun50i.inc

 PREFFERED_VERSION_u-boot = "v2018.09%"

-MACHINE_EXTRA_RRECOMMENDS += " linux-firmware-rtl8723"
-
 KERNEL_DEVICETREE = "allwinner/sun50i-a64-olinuxino.dtb"
 UBOOT_MACHINE = "a64-olinuxino_defconfig"
--- a/conf/machine/orange-pi-one.conf
+++ b/conf/machine/orange-pi-one.conf
@ -4,6 +4,8 @@

 require conf/machine/include/sun8i.inc

+PREFERRED_VERSION_u-boot = "v2018.09%"
+
 KERNEL_DEVICETREE = "sun8i-h3-orangepi-one.dtb"
 UBOOT_MACHINE = "orangepi_one_defconfig"

--- a/conf/machine/orange-pi-pc-plus.conf
+++ b/conf/machine/orange-pi-pc-plus.conf
@ -4,6 +4,8 @@

 require conf/machine/include/sun8i.inc

+PREFERRED_VERSION_u-boot = "v2018.09%"
+
 KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc-plus.dtb"
 UBOOT_MACHINE = "orangepi_pc_plus_defconfig"

--- a/conf/machine/orange-pi-pc.conf
+++ b/conf/machine/orange-pi-pc.conf
@ -4,6 +4,8 @@

 require conf/machine/include/sun8i.inc

+PREFERRED_VERSION_u-boot = "v2018.09%"
+
 KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc.dtb"
 UBOOT_MACHINE = "orangepi_pc_defconfig"

--- a/conf/machine/orange-pi-zero-plus2-h3.conf
+++ b/conf/machine/orange-pi-zero-plus2-h3.conf
@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-zero-plus2-h3
-#@DESCRIPTION: Machine configuration for the orange-pi-zero-plus2, based on Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-require conf/machine/include/hardware/ap6212a.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-orangepi-zero-plus2.dtb"
-UBOOT_MACHINE = "orangepi_zero_plus2_h3_defconfig"
--- a/conf/machine/orange-pi-zero-plus2.conf
+++ b/conf/machine/orange-pi-zero-plus2.conf
@ -2,8 +2,10 @@
 #@NAME: orange-pi-zero-plus2
 #@DESCRIPTION: Machine configuration for the orange-pi-zero-plus2, base on Allwinner H5 CPU

+
 require conf/machine/include/sun50i.inc
-require conf/machine/include/hardware/ap6212a.inc
+
+PREFERRED_VERSION_u-boot = "v2018.09%"

 KERNEL_DEVICETREE = "allwinner/sun50i-h5-orangepi-zero-plus2.dtb"
 UBOOT_MACHINE = "orangepi_zero_plus2_defconfig"
--- a/conf/machine/orange-pi-zero.conf
+++ b/conf/machine/orange-pi-zero.conf
@ -4,6 +4,8 @@

 require conf/machine/include/sun8i.inc

+PREFERRED_VERSION_u-boot = "v2018.09%"
+
 KERNEL_DEVICETREE = "sun8i-h2-plus-orangepi-zero.dtb"
 UBOOT_MACHINE = "orangepi_zero_defconfig"

--- a/conf/machine/pcduino.conf
+++ b/conf/machine/pcduino.conf
@ -4,6 +4,8 @@

 require conf/machine/include/sun4i.inc

+PREFERRED_VERSION_u-boot = "v2018.09%"
+
 KERNEL_DEVICETREE = "sun4i-a10-pcduino.dtb"
 UBOOT_MACHINE = "Linksprite_pcDuino_defconfig"
 SUNXI_FEX_FILE = "sys_config/a10/pcduino.fex"
--- a/conf/machine/pine64-plus.conf
+++ b/conf/machine/pine64-plus.conf
@ -5,5 +5,7 @@

 require conf/machine/include/sun50i.inc

+PREFERRED_VERSION_u-boot = "v2018.09%"
+
 KERNEL_DEVICETREE = "allwinner/sun50i-a64-pine64-plus.dtb"
 UBOOT_MACHINE = "pine64_plus_defconfig"
--- a/recipes-bsp/u-boot/files/0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch
+++ b/recipes-bsp/u-boot/files/0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch
@ -1,21 +1,20 @@
-From 6adb2ebdc4022c24497e9ee4dccab41d18e3105d Mon Sep 17 00:00:00 2001
+From f4a77da23b3890b53efab6a927cbe99b76ef3b26 Mon Sep 17 00:00:00 2001
 From: Florin Sarbu <florin@resin.io>
 Date: Wed, 12 Sep 2018 14:22:49 +0200
 Subject: [PATCH] nanopi_neo_air_defconfig: Enable eMMC support

 Upstream-status: Pending
 Signed-off-by: Florin Sarbu <florin@resin.io>
-
 ---
 configs/nanopi_neo_air_defconfig | 1 +
 1 file changed, 1 insertion(+)

 diff --git a/configs/nanopi_neo_air_defconfig b/configs/nanopi_neo_air_defconfig
-index 5ad90ddd16..8b7a4eb45d 100644
+index 8c362fa885..c7929ff015 100644
 --- a/configs/nanopi_neo_air_defconfig
 +++ b/configs/nanopi_neo_air_defconfig
-@@ -15,3 +15,4 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-neo-air"
+@@ -15,3 +15,4 @@ CONFIG_CONSOLE_MUX=y
+ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-neo-air"
 CONFIG_USB_EHCI_HCD=y
- CONFIG_USB_OHCI_HCD=y
 CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
 +CONFIG_MMC_SUNXI_SLOT_EXTRA=2
--- a/recipes-bsp/u-boot/u-boot-sunxi.bb
+++ b/recipes-bsp/u-boot/u-boot-sunxi.bb
@ -20,9 +20,8 @@ UBOOT_MACHINE_meleg = "Mele_A1000G_config"

 SRC_URI = " \
 	git://github.com/linux-sunxi/u-boot-sunxi.git;protocol=git;branch=sunxi \
-	file://0001-gcc5-fixes.patch \
-	file://0002-gcc6-fixes.patch \
-	file://0003-No-gcc-version-specific-includes.patch \
+	file://0002-gcc5-fixes.patch \
+	file://0003-gcc6-fixes.patch \
 	"

 PE = "1"
@ -36,7 +35,3 @@ S = "${WORKDIR}/git"
 PACKAGE_ARCH = "${MACHINE_ARCH}"

 SPL_BINARY="u-boot-sunxi-with-spl.bin"
-
-do_configure () {
-    oe_runmake -C ${S} O=${B} ${UBOOT_MACHINE}
-}
--- a/recipes-bsp/u-boot/u-boot-sunxi/0002-gcc5-fixes.patch
+++ b/recipes-bsp/u-boot/u-boot-sunxi/0002-gcc5-fixes.patch
--- a/recipes-bsp/u-boot/u-boot-sunxi/0003-No-gcc-version-specific-includes.patch
+++ b/recipes-bsp/u-boot/u-boot-sunxi/0003-No-gcc-version-specific-includes.patch
@ -1,24 +0,0 @@
-From bc4aa5814cbedbfaa1c79dfe7ea2571fee7f2d51 Mon Sep 17 00:00:00 2001
-From: Andrey Lebedev <andrey@lebedev.lt>
-Date: Wed, 22 Jan 2020 20:00:11 +0200
-Subject: [PATCH] No gcc version-specific includes
-
-In order to support gcc-5 and above. Fixes compilation errors like
-
-linux/compiler-gcc9.h: No such file or directory
---
- include/linux/compiler-gcc.h | 1 -
- 1 file changed, 1 deletion(-)
-
-diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
-index 9896e547b9..5f0bd65f3a 100644
--- a/include/linux/compiler-gcc.h
-+++ b/include/linux/compiler-gcc.h
-@@ -90,4 +90,3 @@
- #define __gcc_header(x) #x
- #define _gcc_header(x) __gcc_header(linux/compiler-gcc##x.h)
- #define gcc_header(x) _gcc_header(x)
-#include gcc_header(__GNUC__)
-- 
-2.20.1
-
--- a/recipes-bsp/u-boot/u-boot-sunxi/0003-gcc6-fixes.patch
+++ b/recipes-bsp/u-boot/u-boot-sunxi/0003-gcc6-fixes.patch
--- a/recipes-bsp/u-boot/u-boot_2018.09.bb
+++ b/recipes-bsp/u-boot/u-boot_2018.09.bb
@ -1,8 +1,13 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+DESCRIPTION="Upstream's U-boot configured for sunxi devices"
+
+require recipes-bsp/u-boot/u-boot.inc

 DEPENDS += " bc-native dtc-native swig-native python3-native flex-native bison-native "
 DEPENDS_append_sun50i = " atf-sunxi "

+LICENSE = "GPLv2+"
+LIC_FILES_CHKSUM = "file://Licenses/README;md5=30503fd321432fc713238f582193b78e"
+
 COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"

 DEFAULT_PREFERENCE_sun4i="1"
@ -11,11 +16,18 @@ DEFAULT_PREFERENCE_sun7i="1"
 DEFAULT_PREFERENCE_sun8i="1"
 DEFAULT_PREFERENCE_sun50i="1"

-SRC_URI += " \
+SRC_URI = "git://git.denx.de/u-boot.git;branch=master \
           file://0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch \
           file://boot.cmd \
           "

+SRCREV = "f88b6facb87dc4a52f1630eb9d858c0f54c6628e"
+
+PV = "v2018.09+git${SRCPV}"
+PE = "2"
+
+S = "${WORKDIR}/git"
+
 UBOOT_ENV_SUFFIX = "scr"
 UBOOT_ENV = "boot"

--- a/recipes-devtools/python/files/setup.py.patch
+++ b/recipes-devtools/python/files/setup.py.patch
@ -0,0 +1,51 @@
+--- pyA20-0.2.1/setup.py	2014-09-04 12:17:18.000000000 +0200
+++ pyA20-0.2.1/setup.py	2014-11-24 17:44:37.000000000 +0100
+@@ -43,31 +43,31 @@
+     Detect processor type
+     :return:
+     """
+-    cpuinfo = open("/proc/cpuinfo", 'r')
+-    for line in cpuinfo:
+-        if "Hardware" in line:
+-            processor = line.split(":")[1].rstrip()
+    #cpuinfo = open("/proc/cpuinfo", 'r')
+    #for line in cpuinfo:
+    #    if "Hardware" in line:
+    #        processor = line.split(":")[1].rstrip()
+ 
+-            if "sun4i" in processor:
+-                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A10)")
+    #        if "sun4i" in processor:
+    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A10)")
+ 
+-            elif "sun5i" in processor:
+-                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A13)")
+    #        elif "sun5i" in processor:
+    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A13)")
+ 
+-            elif "sun7i" in processor:
+-                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A20)")
+    #        elif "sun7i" in processor:
+    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A20)")
+ 
+-            else:
+-                print ("Detected processor: " + print_color("unknown"))
+    #        else:
+    #            print ("Detected processor: " + print_color("unknown"))
+ 
+ 
+-            if processor_type not in processor:
+-                print_warning()
+    #        if processor_type not in processor:
+    #            print_warning()
+ 
+-            return
+    return
+ 
+-    print ("No processor detected")
+-    print_warning()
+    #print ("No processor detected")
+    #print_warning()
+ 
+ 
+ class build_ext(_build_ext):
--- a/recipes-devtools/python/pya20_0.2.12.bb
+++ b/recipes-devtools/python/pya20_0.2.12.bb
@ -1,23 +1,24 @@
 DESCRIPTION = "A module to control Allwinner GPIO,SPI and I2C channels"
 HOMEPAGE = "https://pypi.python.org/pypi/pyA20"
 SECTION = "devel/python"
-LICENSE = "GPLv3"
-LIC_FILES_CHKSUM = "file://PKG-INFO;md5=4e584373bb0f46ef1e423cb7df37847d"
-DEPENDS = "python3"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://PKG-INFO;md5=bfe0261ded6cff75086193ec2f79129e"
+DEPENDS = "python"

 # No GPIO mappings for other machines yet
 COMPATIBLE_MACHINE = "(olinuxino-a13|olinuxino-a10|olinuxino-a20|olinuxino-a10lime|olinuxino-a20lime|olinuxino-a20lime2|olinuxino-a13som|olinuxino-a20som)"

 SRC_URI = "https://pypi.python.org/packages/source/p/pyA20/pyA20-${PV}.tar.gz \
+           file://setup.py.patch \
           file://mapping.h \
          "
 S = "${WORKDIR}/pyA20-${PV}"

-inherit distutils3
+inherit distutils

 do_compile_prepend() { 
 cp ${WORKDIR}/mapping.h ${S}/pyA20/gpio/mapping.h
 }

-SRC_URI[md5sum] = "cab03b4931199804603d1074f6d8f48f"
-SRC_URI[sha256sum] = "4bef559a9c5a4d648d9834bad996cf2805b20d6063b8051029ffdf9deda2b536"
+SRC_URI[md5sum] = "2290066bbe274000c53693959a8005b4"
+SRC_URI[sha256sum] = "b15e4ee1016b7eb52001cbccde3751868624a88d2adbb9adc5404628f7e59e7e"
--- a/recipes-devtools/python/pya20som_0.2.1.bb
+++ b/recipes-devtools/python/pya20som_0.2.1.bb
@ -0,0 +1,24 @@
+DESCRIPTION = "A module to control Allwinner GPIO,SPI and I2C channels"
+HOMEPAGE = "https://pypi.python.org/pypi/pyA20SOM"
+SECTION = "devel/python"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://PKG-INFO;md5=cf6345f2cb2acee98b01c493d68b8322"
+DEPENDS = "python"
+
+# No GPIO mappings for other machines yet
+COMPATIBLE_MACHINE = "olinuxino-a20som"
+
+SRC_URI = "https://pypi.python.org/packages/source/p/pyA20SOM/pyA20SOM-${PV}.tar.gz \
+           file://setup.py.patch \
+           file://mapping.h \
+          "
+S = "${WORKDIR}/pyA20SOM-${PV}"
+
+inherit distutils
+
+do_compile_prepend() { 
+cp ${WORKDIR}/mapping.h ${S}/pyA20SOM/gpio/mapping.h
+}
+
+SRC_URI[md5sum] = "a720115ef1d3dffe82f42f2157ca1c56"
+SRC_URI[sha256sum] = "1ac1025596cc112964f7caac9a6a523d5da61623c248ccc178c6cbb4bc1b4549"
--- a/recipes-graphics/mesa/mesa_%.bbappend
+++ b/recipes-graphics/mesa/mesa_%.bbappend
@ -1,5 +0,0 @@
-# Enable lima and panfrost Mesa drivers
-PACKAGECONFIG_append_use-mailine-graphics = " lima panfrost"
-# Enable KMS renderonly Mesa support
-# See https://cgit.freedesktop.org/mesa/mesa/commit/?id=2b780fe89300199f2334539aa1678e9b68f0434f
-GALLIUMDRIVERS_append_use-mailine-graphics = ",kmsro"
--- a/recipes-kernel/linux-firmware/linux-firmware_%.bbappend
+++ b/recipes-kernel/linux-firmware/linux-firmware_%.bbappend
@ -1,13 +0,0 @@
-# The brcmfmac driver looks for NVRAM files using the first entry in board
-# compatible since kernel >= 5.0:
-# https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0ad4b55b2f29784f93875e6231bf57cd233624a2
-# We create a link to the AP6212 module NVRAM file so that firmware is
-# autodetected by the driver.
-# WARNING: The following commit is required for NVRAM files to be included in
-# linux-firmware-bcm43430 package:
-# http://git.openembedded.org/openembedded-core/commit/?id=dde0f79f32fa6bab045ef60199903f74c4cc3393
-do_install_append() {
-	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2.txt
-	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2-h3.txt
-	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt
-}
--- a/recipes-kernel/linux/linux-mainline/aarch64/defconfig
+++ b/recipes-kernel/linux/linux-mainline/aarch64/defconfig
@ -141,11 +141,6 @@ CONFIG_BT_LEDS=y
 # CONFIG_BT_DEBUGFS is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_LL=y
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_PRIV=y
 CONFIG_CFG80211=m
 CONFIG_MAC80211=m
 CONFIG_MAC80211_LEDS=y
@ -499,8 +494,6 @@ CONFIG_VIRTIO_BALLOON=y
 CONFIG_VIRTIO_MMIO=y
 CONFIG_XEN_GNTDEV=y
 CONFIG_XEN_GRANT_DEV_ALLOC=y
-CONFIG_STAGING=y
-CONFIG_RTL8723BS=m
 CONFIG_COMMON_CLK_RK808=y
 CONFIG_COMMON_CLK_SCPI=y
 CONFIG_COMMON_CLK_CS2000_CP=y
--- a/recipes-kernel/linux/linux-mainline/arm/defconfig
+++ b/recipes-kernel/linux/linux-mainline/arm/defconfig
@ -485,8 +485,8 @@ CONFIG_CW1200_WLAN_SDIO=m
 CONFIG_CW1200_WLAN_SPI=m
 CONFIG_RSI_91X=m
 # CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_MOUSE=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_SUN4I=y
 CONFIG_INPUT_MISC=y
--- a/recipes-kernel/linux/linux-mainline/axp20x.cfg
+++ b/recipes-kernel/linux/linux-mainline/axp20x.cfg
@ -1,4 +0,0 @@
-CONFIG_MFD_AXP20X_I2C=y
-CONFIG_MFD_AXP20X=y
-CONFIG_IIO=y
-CONFIG_AXP20X_POWER=y
--- a/recipes-kernel/linux/linux-mainline/drm.cfg
+++ b/recipes-kernel/linux/linux-mainline/drm.cfg
@ -1,8 +0,0 @@
-CONFIG_DRM=y
-CONFIG_DRM_SUN4I=y
-CONFIG_DRM_SUN8I_DW_HDMI=y
-CONFIG_DRM_SUN8I_MIXER=y
-CONFIG_DRM_LIMA=y
-CONFIG_DRM_PANFROST=y
-CONFIG_CMA=y
-CONFIG_DMA_CMA=y
--- a/recipes-kernel/linux/linux-mainline/orange-pi-zero/0001-dts-orange-pi-zero-Add-wifi-support.patch
+++ b/recipes-kernel/linux/linux-mainline/orange-pi-zero/0001-dts-orange-pi-zero-Add-wifi-support.patch
--- a/recipes-kernel/linux/linux-mainline_4.19.103.bb
+++ b/recipes-kernel/linux/linux-mainline_4.19.103.bb
@ -1,5 +1,5 @@
 SECTION = "kernel"
-DESCRIPTION = "Mainline Longterm Linux kernel"
+DESCRIPTION = "Mainline Linux kernel"
 LICENSE = "GPLv2"
 LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
 COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
@ -19,8 +19,8 @@ KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"

 S = "${WORKDIR}/linux-${PV}"

-SRC_URI[md5sum] = "6287e6d6658e593a2978dc718f7de3f3"
-SRC_URI[sha256sum] = "b4784571bd7f3dc10ae3dc4414876dbd73fc6750401299b206670ce3e5c4bb43"
+SRC_URI[md5sum] = "5f72b9a1e40192aecf867ff2cdcc15ba"
+SRC_URI[sha256sum] = "75988760b931864b46292dcfad1dd54b3f4da10168041f48ca6d7f6dd4e5d25d"

 SRC_URI = "https://www.kernel.org/pub/linux/kernel/v4.x/linux-${PV}.tar.xz \
        file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
--- a/recipes-kernel/linux/linux-mainline_5.0.19.bb
+++ b/recipes-kernel/linux/linux-mainline_5.0.19.bb
@ -1,4 +1,5 @@
 SECTION = "kernel"
+DESCRIPTION = "Mainline Linux kernel"
 LICENSE = "GPLv2"
 LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
 COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
@ -11,8 +12,6 @@ require linux.inc
 # in something or kernel-yocto.bbclass will fail.
 KBRANCH ?= "master"

-DEPENDS += "rsync-native"
-
 # Pull in the devicetree files into the rootfs
 RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"

@ -20,13 +19,14 @@ KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"

 S = "${WORKDIR}/linux-${PV}"

+SRC_URI[md5sum] = "52fb710109527b042278359526588da8"
+SRC_URI[sha256sum] = "0bf0d5c64dafc1184e9aafd2f3ebb77aa88ddee881a7766436258feaa214d9ec"
+
 SRC_URI = "https://www.kernel.org/pub/linux/kernel/v5.x/linux-${PV}.tar.xz \
-	file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
+        file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
+        file://defconfig \
+        "
+
+SRC_URI_append_orange-pi-zero += "\
 	file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
-	file://defconfig \
-"
-
-SRC_URI_append_use-mailine-graphics = " file://drm.cfg"
-SRC_URI_append_bananapi = " file://axp20x.cfg"
-
-FILES_${KERNEL_PACKAGE_NAME}-base_append = " ${nonarch_base_libdir}/modules/${KERNEL_VERSION}/modules.builtin.modinfo"
+	"
--- a/recipes-kernel/linux/linux-mainline_5.2-rc2.bb
+++ b/recipes-kernel/linux/linux-mainline_5.2-rc2.bb
@ -0,0 +1,34 @@
+SECTION = "kernel"
+DESCRIPTION = "Mainline Linux kernel"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
+
+inherit kernel
+
+require linux.inc
+
+# Since we're not using git, this doesn't make a difference, but we need to fill
+# in something or kernel-yocto.bbclass will fail.
+KBRANCH ?= "master"
+
+# Pull in the devicetree files into the rootfs
+RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"
+
+KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
+
+S = "${WORKDIR}/linux-${PV}"
+
+SRC_URI[md5sum] = "bf80c4ab5f475a2c0846340fb9eb6449"
+SRC_URI[sha256sum] = "8ec8258e75ebdcd8197328b8571435c246f55d7da7f6ed65e96aa8d4bff9a639"
+
+SRC_URI = "https://git.kernel.org/torvalds/t/linux-${PV}.tar.gz \
+        file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
+        file://defconfig \
+        "
+SRC_URI_append_orange-pi-zero += "\
+	file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
+	"
+
+FILES_${KERNEL_PACKAGE_NAME}-base_append = " ${nonarch_base_libdir}/modules/${KERNEL_VERSION}/modules.builtin.modinfo"
+
--- a/recipes-kernel/linux/linux-mainline_5.4.18.bb
+++ b/recipes-kernel/linux/linux-mainline_5.4.18.bb
@ -1,6 +0,0 @@
-require linux-mainline.inc
-
-DESCRIPTION = "Mainline Longterm Linux kernel"
-
-SRC_URI[md5sum] = "dccb4d028c97b6fe5d0bca14a1afcd58"
-SRC_URI[sha256sum] = "92e9f1fd69543e9ce2a9e6eb918823b1846d2dd99246a74456263cd5ad234d89"
--- a/recipes-kernel/linux/linux-mainline_5.5.3.bb
+++ b/recipes-kernel/linux/linux-mainline_5.5.3.bb
@ -1,6 +0,0 @@
-require linux-mainline.inc
-
-DESCRIPTION = "Mainline Stable Linux kernel"
-
-SRC_URI[md5sum] = "3ea50025d8c679a327cf2fc225d81a46"
-SRC_URI[sha256sum] = "2bef3edcf44c746383045f4a809b2013e18c52319c827875ed8e89138951cab2"
--- a/recipes-kernel/linux/linux-sunxi/0001-gcc5-fixes.patch
+++ b/recipes-kernel/linux/linux-sunxi/0001-gcc5-fixes.patch
--- a/recipes-kernel/linux/linux-sunxi/0004-arm-put-user-asm-fix.patch
+++ b/recipes-kernel/linux/linux-sunxi/0004-arm-put-user-asm-fix.patch
@ -1,29 +0,0 @@
-From 25a7e85eb0d58479f7d8895b1b29a648bd07d60e Mon Sep 17 00:00:00 2001
-From: Andrey Lebedev <andrey@lebedev.lt>
-Date: Mon, 20 Jan 2020 23:19:51 +0200
-Subject: [PATCH 2/2] Fix asm error in put_user under gcc version 8 and above
-
-Fixes these errors during compilation of linux-sunxi-3.4 kernel:
-/tmp/ccCGMQmS.s:648: Error: .err encountered
-
-Taken from https://patchwork.kernel.org/patch/10546809/
---
- arch/arm/include/asm/uaccess.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
-index b04850fd..abfafbbf 100644
--- a/arch/arm/include/asm/uaccess.h
-+++ b/arch/arm/include/asm/uaccess.h
-@@ -159,7 +159,7 @@ extern int __put_user_8(void *, unsigned long long);
- 	({								\
- 		unsigned long __limit = current_thread_info()->addr_limit - 1; \
- 		const typeof(*(p)) __user *__tmp_p = (p);		\
-		register const typeof(*(p)) __r2 asm("r2") = (x);	\
-+		register typeof(*(p)) __r2 asm("r2") = (x);		\
- 		register const typeof(*(p)) __user *__p asm("r0") = __tmp_p; \
- 		register unsigned long __l asm("r1") = __limit;		\
- 		register int __e asm("r0");				\
-- 
-2.20.1
-
--- a/recipes-kernel/linux/linux-sunxi/0005-silence-warning.patch
+++ b/recipes-kernel/linux/linux-sunxi/0005-silence-warning.patch
@ -1,25 +0,0 @@
-From 302604ee4a2011871cb26deaf69d567cf57d0fe3 Mon Sep 17 00:00:00 2001
-From: Andrey Lebedev <andrey@lebedev.lt>
-Date: Mon, 20 Jan 2020 23:20:07 +0200
-Subject: [PATCH 1/2] Silence annoying warning
-
---
- include/linux/log2.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/include/linux/log2.h b/include/linux/log2.h
-index fd7ff3d9..14458fdd 100644
--- a/include/linux/log2.h
-+++ b/include/linux/log2.h
-@@ -18,7 +18,7 @@
- /*
-  * deal with unrepresentable constant logarithms
-  */
-extern __attribute__((const, noreturn))
-+extern __attribute__((const))
- int ____ilog2_NaN(void);
- 
- /*
-- 
-2.20.1
-
--- a/recipes-kernel/linux/linux-sunxi_3.4.bb
+++ b/recipes-kernel/linux/linux-sunxi_3.4.bb
@ -14,12 +14,9 @@ MACHINE_KERNEL_PR_append = "a"
 SRC_URI += "git://github.com/linux-sunxi/linux-sunxi.git;branch=sunxi-3.4;protocol=git \
        file://0001-compiler-gcc-integrate-the-various-compiler-gcc-345-.patch \
        file://0002-use-static-inline-in-ARM-ftrace.patch \
-        file://0003-gcc5-fixes.patch \
-        file://0004-arm-put-user-asm-fix.patch \
-        file://0005-silence-warning.patch \
+        file://0001-gcc5-fixes.patch \
        file://defconfig \
        "
-LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"

 S = "${WORKDIR}/git"
Author	SHA1	Message	Date
Bartłomiej Burdukiewicz	910aa5f159	conf: added sunxi and sunxi64 machine overrides.	2020-11-23 08:19:02 +01:00
Petr Buchta	41953517cb	fixing missing 'compatible' property in reg_vcc_wifi node	2020-02-10 19:57:09 +01:00
Marek Belisko	cfca593338	linux: refresh orange-pi-zero wifi patch Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>	2020-02-10 19:56:57 +01:00
slapin	345cd0d023	linux-sunxi: disable glamor build if Mali is used Unless somebody writes libgbm replacement for binary Mali driver (sort of converter for gbm-UMB) there is no glamor for us. Closes #227	2019-09-07 22:43:19 +02:00
slapin	4a083b6678	Fix soname in Mali.so to make auto-RDEPENDS work The auto-RDEPENDs system reqires that all .so libraries have proper soname set. If library soes not have soname set, it will not be added to RDEPENDs list of other elf files. Closes #240	2019-09-07 22:43:08 +02:00
Marek Belisko	986634abbb	linux-mainline: Bump 4.19 to latest stable Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>	2019-08-07 08:14:58 +02:00