_M_IX86 will be defined in mingw builds after including windows.h. as
the gcc inline asm is first, this missing check would only have caused
an error if the code was reorganized.
Change-Id: I395679bcfc43e94d308d1ceb0c0fbf932b2c378c
this defines WORDS_BIGENDIAN, replacing uses of
__BIG_ENDIAN__/__BYTE_ORDER__ with it
+ fixes lossless BGRA output with big-endian toolchains
that do not define __BIG_ENDIAN__ (codesourcery mips gcc)
Change-Id: Ieaccd623292d235343b5e34b7a720fc251c432d7
this will remove a warning about the shift amount not being
an immediate (=constant).
Change-Id: Ie9a00fefdb9a07ec8994fb113f24234518bc878a
Also: fix the NULL sharpen argument mismatch.
Another store to load forward block was detected coming from the function
FTransform.
FTransform save the output data 4 times 8 bytes each. when this data is
later being loaded by the QuantizeBlock function in one chunk of 16 bytes
that caused a store to load forward block.
The fix was done in the FTransform function where each two consecutive 8 bytes
were merged into one 16 bytes register and saved into the memory.
This fix gives ~21% function level gain and 1.6% user level gain.
Change-Id: Idc27c307d5083f3ebe206d3ca19059e5bd465992
only 1 of <lib>_CPPFLAGS and AM_CPPFLAGS is used, with the former
getting precedence when it's defined. configure's DEFAULT_INCLUDES is
covering what's necessary given the include paths are all source
relative.
Change-Id: I7d14076acd266b28a88a3d92bcc3d7165284d5f3
this change has the side-effect of using directory names in the
include, silencing a lint warning.
Change-Id: Ib91cf63a90534e32fadfa5c2372bfdb29f854d02
if res->first = 1, coeffs[0]=0 because of quant.c:749 and line
added at quant.c:744
So, no need for the extra case.
Going forward, TrellisQuantizeBlock() should also be calling
a variant of VP8SetResidualCoeffs() to set the 'last' field.
also: fixes a warning for win64
+ slight speed-up
Change-Id: Ib24b611f7396d24aeb5b56dc74d5c39160f048f0
+ add a WEBP_HAVE_SSE2 to dsp.h
not all 32-bit toolchain configurations will have sse2 enabled by
default
Change-Id: I7c675e511581f93cf55c79f960fa7efa2df4987e
this is used to set WEBP_USE_AVX2 in files where the build flag won't be
used, i.e., dsp/enc.c, which enables VP8EncDspInitAVX2() to be called
Change-Id: I362f4ba39ca40d3e07a081292d5f743c649d9d7f
Extract loop invariant and avoid storing/loading samples
if they can be re-used. This is particularly interesting when
a transpose is involved (HFilter16i).
Change-Id: I93274620f6da220a35025ff8708ff0c9ee8c4139
The luminance needs to be pre- and post- multiplied by
the alpha value in case of rescaling, for proper averaging.
Also:
- removed util/alpha_processing and moved it to dsp/
- removed WebPInitPremultiply() which was mostly useless
and merged it with the new function WebPInitAlphaProcessing()
Change-Id: If089cefd4ec53f6880a791c476fb1c7f7c5a8e60
VP8EncDspInitAVX2 is included in sse2 builds for now, later a configure
flag should be added to avoid the stub when avx2 is unavailable/disabled
Change-Id: I6127b687c273f46f41652aaf8e3b86ae3cfb8108
* remove some sign-bit flipping
* turn some macro into inline functions
* fix some 'const' in signatures
* clarify the int8/uint8 usage
Change-Id: Ib04459ac34cb280c57579c5d79a5efd2f8d5e99d
The predictors based on Average2 are tad slower.
Following is the performance data for these predictors normalized to
number of instruction cycles (as per valgrind) per operation:
- Predictor6 & Predictor7 now takes 15 instruction cycles compared to 11
instruction cycles for the C version.
- Predictor8 & Predictor9 now takes 15 instruction cycles compared to 12
instruction cycles for the C version.
The predictors based on Average4 is faster and Average3 is tad slower:
- Predictor10 (Average4) now takes 23 instruction cycles compared to 25
instruction cycles for the C version.
- Predictor5 (Average3) now takes 20 instruction cycles compared to 18
instruction cycles for the C version.
Maybe SSE2 version of Average2 can be improved further. Otherwise, we can
remove the SSE2 version and always fallback to the C version.
Change-Id: I388b2871919985bc28faaad37c1d4beeb20ba029
* merged the two HistogramAdd/AddEval() into a single call
(with detection of special case when b==out)
* added a SSE2 variant
* harmonize the histogram type to 'uint32_t' instead
of just 'int'. This has a lot of ripples on signatures.
* 1-2% faster
Change-Id: I10299ff300f36cdbca5a560df1ae4d4df149d306
move simple loop filter defines closer to their use and LOAD* to a
location common with the intrinsics
Change-Id: Iaec506d27bbc9a01be20936e30b68a4b0e690ee3
the complex loop filter has no inline equivalent; the simple loop filter
remains conditional on USE_INTRINSICS: it's left undefined for now.
Change-Id: I4f258e10458df53a7a1819707c8f46b450e9d9d2
CollectHistogram / SSE* / QuantizeBlock have no inline equivalents,
enable them where possible and use USE_INTRINSICS to control borderline
cases: it's left undefined for now.
Change-Id: I62235bc4ddb8aa0769d1ce18a90e0d7da1e18155
using this in Load4x16 was slightly slower and didn't help mitigate any
of the remaining build issues with 4.6.x.
Change-Id: Idabfe1b528842a514d14a85f4cefeb90abe08e51
HuffmanCost and HuffmanCostCombined optimized and added
'const' to some variables from ExtraCost functions.
Change-Id: I28b2b357a06766bee78bdab294b5fc8c05ac120d
Some versions of compiler in debug build can't find
a register in class 'GR_REGS' while reloading 'asm'
Number of used registers is decreased in this fix.
Change-Id: I7d7b8172b8f37f1de4db3d8534a346d7a72c5065
This is to help further optimizations.
(like in https://gerrit.chromium.org/gerrit/#/c/69787/)
There's a small slowdown (~0.5% at -z 9 quality) due to
function pointer usage. Note that, for speed, it's important
to return VP8LStreaks by value, and not pass a pointer.
Change-Id: Id4167366765fb7fc5dff89c1fd75dee456737000
avoids:
src/dsp/enc_mips32.c: In function 'ITransformOne':
src/dsp/enc_mips32.c:123:3: can't find a register in class 'GR_REGS' while reloading 'asm'
src/dsp/enc_mips32.c:123:3: 'asm' operand has impossible constraints
Change-Id: Ic469667ee572f25e502c9873c913643cf7bbe89d
apparently faster, but we might save some load/store to/from memory
once we settle for the intrinsics-based FTransform()
(also: fixed some #ifdef USE_INTRINSICS problems)
Change-Id: I426dea299cea0c64eb21c4d81a04a960e0c263c7
Functions VP8LFastLog2Slow and VP8LFastSLog2Slow
also: replaced some "% y" by "& (y-1)" in the C-version
(since y is a power-of-two)
Change-Id: I875170384e3c333812ca42d6ce7278aecabd60f0
Verified OK, but right now they don't seem faster.
So they are disabled behind a USE_INTRINSICS flag (off for now)
Change-Id: I72a1c4fa3798f98c1e034f7ca781914c36d3392c
+ reorganize the cost-evaluation code by moving some functions
to cost.h/cost.c and exposing VP8Residual
Change-Id: Id976299b5d4484e65da8bed31b3d2eb9cb4c1f7d
slightly faster than the inline asm
in practice not much faster than the C-code in a full NEON build, but
still better overall in an Android-like one that only enables NEON for
certain files.
Change-Id: I69534016186064fd92476d5eabc0f53462d53146
