The 32-bit buffers are actually rarely 64-bit aligned.
The new solution uses memcmp and is alignment agnostic.
It is also slightly faster.
Change-Id: I863003e9ee4ee8a3eed25b7b2478cb82a0ddbb20
for more speed.
This gives a roughly a 1% speedup for low_effort. But actually this is a
preparation for the upcoming CL that changes RGB values of transparent pixels
based on prediction, which should not be done for low_effort because that would
slightly hurt its performance.
On 1000 PNGs, with quality 0, method 0:
Before:
Compression (output/input): 2.9120/3.2667 bpp, Encode rate (raw data): 36.034 MP/s
After:
Compression (output/input): 2.9120/3.2667 bpp, Encode rate (raw data): 36.428 MP/s
Change-Id: I5ed9f599bbf908a917723f3c780551ceb7fd724d
Arrays were compared 32 bits at a time, it is now done 64 bits at a time.
Overall encoding speed-up is only of 0.2% on @skal's small PNG corpus.
It is of 3% on my initial 1.3 Mp desktop screenshot image.
Change-Id: I1acb32b437397a7bf3dcffbecbcd4b06d29c05e1
The same computation was done for both values: go over two buffers,
sum them up, and take a decision on the sum at each iteration.
MIPS32 code has been disabled for now, pending a code update.
Change-Id: I997984326f7092b3dbb8cfa1e524bd8132b2ab9d
instead of per block. This prepares for a next CL that can make the
predictors alter RGB value behind transparent pixels for denser
encoding. Some predictors depend on the top-right pixel, and it must
have been already processed to know its new RGB value, so requires per
scanline instead of per block.
Running the encode speed test on 1000 PNGs 10 times with default
settings:
Before:
Compression (output/input): 2.3745/3.2667 bpp, Encode rate (raw data): 1.497 MP/s
After:
Compression (output/input): 2.3745/3.2667 bpp, Encode rate (raw data): 1.501 MP/s
Same but with quality 0, method 0 and 30 iterations:
Before:
Compression (output/input): 2.9120/3.2667 bpp, Encode rate (raw data): 36.379 MP/s
After:
Compression (output/input): 2.9120/3.2667 bpp, Encode rate (raw data): 36.462 MP/s
No effect on compressed size, this produces exactly same files. No
significant measured effect on speed. Expected faster speed from better
memory layout with scanline processing but slower speed due to needing
to get predictor mode per pixel, may compensate each other.
Change-Id: I40f766f1c1c19f87b62c1e2a1c4cd7627a2c3334
the problem was the incorporation of the extra constant 1<<16 in the kC1
constant, to emulate the addition. It's now removed and the addition is
performed explicitly.
No real speed difference observed.
cf. issue #278
Change-Id: I2c6499031571d98afff392fb5ebe21a5fa60722d
* changes:
Makefile.vc: enable WEBP_USE_THREAD for windows phone
thread: use CreateThread for windows phone
thread: use WaitForSingleObjectEx if available
thread: use InitializeCriticalSectionEx if available
thread: use native windows cond var if available
if FANCY_UPSAMPLING was not defined but io->fancy_upsampling was set,
then the call to WebPInitSamplers() was skipped -> boom.
Change-Id: Id63e2ecc09f532fbe2ec9936d9ce4b502ba8fac5
Rename the flag to exact instead of the opposite cleanup_alpha. Add the flag to
WebPConfig. Do the cleanup in the webp encoder library rather than the cwebp
binary, this will be needed for the next stage: smarter alpha cleanup for
better compression which cannot be done as a preprocessing due to depending on
predictor choices in the encoder.
Change-Id: I2fbf57f918a35f2da6186ef0b5d85e5fd0020eef
the original change triggered several internal API modifs.
This is to ensure that we're never computing pointer that can
possibly wrap around, or differences between pointers that can
overflow.
no observed speed difference
Change-Id: I9c94dda38d94fecc010305e4ad12f13b8fda5380
We now consider 3 special cases:
* htree-group has only 1 code (no bit is read from bitstream)
* htree-group has few enough literal symbols, so that all the bit
codes can fit into a look-up table of less than 64 entries
* htree-group has a trivial arb literal (not GREEN!), like before
No overall speed change.
Change-Id: I6077fa0b7e5c31a6c67aa8aca859c22cc50ee254
We now get error string instead of printing it.
The verbose option is now only used to print info and warnings.
Change-Id: I985c5acd427a9d1973068e7b7a8af5dd0d6d2585
It was needed earlier for WebPAnimEncoder API when it was using structs
like WebPConfig, but it only uses pointers to those now.
Change-Id: Ic0c144966421c678e8ef54b3fa81574bb2c9cd08
global effect is ~2% faster encoding from JPG source
and ~8% faster lossless-webp source decoding to PGM (e.g.)
Also revamped the YUVA case to first accumulate R/G/B value into 16b
temporary buffer, and then doing the UV conversion.
-> New function: WebPConvertRGBA32ToUV
Change-Id: I1d7d0c4003aa02966ad33490ce0fcdc7925cf9f5
Just for RGB24/BGR24 for now, which are the hard-to-optimize ones.
SSE2 implementation coming next.
ConvertRowToY() should go into dsp/ too, at some point.
Change-Id: Ibc705ede5cbf674deefd0d9332cd82f618bc2425
also switch to using ExtractAlpha() instead of hard-coding the loop.
The ARGBToY/UV functions are rather easy to port to SSE2 / NEON.
Change-Id: I8f1346a9ca427a36ce2d6c848369ca7964d8b3c7
use 'u' rather than the unnecessary 'l' as a suffix. this prevents a
conversion warning with some toolchains
Change-Id: I21c33ce08819b3c839c75e03a8f7f3a6041d0695
Note that ALIGN_CST is still kept different in dec/frame.c for now,
because the values is 31 there, not 15. We might re-unite these two
later.
Change-Id: Ibbee607fac4eef02f175b56f0bb0ba359fda3b87
same functionality, but better code layout.
What changed:
* don't trash the palette_[] in EncodePalette(), so it can be re-used
* split generation of image from bit-stream coding
* move all the delta-palette code to delta_palettization.c, and only have 1 entry point there WebPSearchOptimalDeltaPalette()
* minimize the number of "#ifdef WEBP_EXPERIMENTAL_FEATURES" in vp8l.c
* clarify the TransformBuffer stuff. more clean-up to come here...
This should make experimenting with delta-palettization easier and more compartimentalized.
Change-Id: Iadaa90e6c5b9dabc7791aec2530e18c973a94610
some limitations: only for RGBA output,
and if reduction factor is not too small (dst_width > src_width / 128)
20-25% faster, ~4-6% global improvement total decoding.
Change-Id: I95366ddaa4a38e0a96bed754dfe790126f7bb84a
It's better to stay with a 32b fixed-point precision overall, otherwise
the C-version on ARM gets *slower*.
Actually, gcc ARM compiler optimizes some instructions pretty
well when WEBP_RESCALER_FIX is exactly 32, even in C.
Change-Id: I0eea97f7db5947470f5af355dee098eca81e178d
New palette compresses more than 20% better with minimum quality loss.
Tested on set of wikipedia images with command line:
cwebp -delta_palettization
Change-Id: I82ec7d513136599cd70386f607f634502eb9095d
Earlier, we stored a 1x1 frame for such frames. Now, we drop every such
frame and increase the duration of its previous frame instead.
Also, modify the anim_diff tool to handle animated images that are
equivalent, but have different number of frames.
Change-Id: I2688b1771e1f5f9f6a78e48ec81b01c3cd495403
The rounding and arithmetic is not the same as previously, to prevent overflow cases for large upscale factors.
We still rely on 32b x 32b -> 64b multiplies. Raised the fixed-point precision to 32b
so that we have some nice shifts from epi64 to epi32.
Changed rescaler_t type to 'uint32_t' in order to squeeze in all the precision required.
The MIPS code has been disabled because it's now out-of-sync. Will be fixed in
a subsequent CL when the dust settles.
~30-35% faster
Change-Id: I32e4ddc00933f1b1aa3463403086199fd5dad07b
* vertical expansion now uses bilinear interpolation
* heavily assumes that the alpha plane is decoded in full, not row-by-row
* split the RescalerExportRow and RescalerImportRow methods into Shrink
and Expand variants.
* MIPS implementation of ExportRowExpand is missing.
There's room for extra speed optim and code re-org, but let's keep that for later patches.
addresses https://code.google.com/p/webp/issues/detail?id=254
Change-Id: I8f12b855342bf07dd467fe85e4fde5fd814effdb
This is designed for the simple use-case where one wants to decode all
frames one-by-one in order.
Also, use this API in anim_util library, which is in turn used by
anim_diff tool.
Change-Id: Ie8b653c04e867d40fd23321b3dd41b87689656c7
This makes the chains more efficient and a larger variety of data is tested.
0.02 % compression gain at q 100, 0.05 % at default quality. 0.8 % speedup by
callgrind.
0.16 % compression gain for lossy alpha ?!
Change-Id: I888120133352799eb14f5f602c7f40ab404bd665
this allows scaling to a particular width/height while preserving the
source aspect ratio using WebPRescalerGetScaledDimensions().
Change-Id: I77b11528753290c1e9bb942ac761c215ccfb8701
using a *tmp_plane buffer to split a/r/g/b planes up appeared to
be the easiest route, compared to copy-pasting the whole code and
making it x_stride aware...
Change-Id: I0898ef1df62bd3e1713b77187b31b5eeef3832fe
allows the values to be used in preproc checks, fixing a
-Wunreachable-code warning in 64-bit builds where VP8L_WRITER_BITS != 16
Change-Id: Ie98dff4e8ef896436557c64d5da2c5d70228a730
Slightly faster on -m 0 -q 0, particularly for small images (50 x 75
image was 0.1 % faster on callgrind measurement).
Increases compression density by 0.005 % for the 1000 images, but small
images can improve even 0.5 % (about 4 bytes, depending on the
characteristics of the palette).
Change-Id: I94f568d396ac62a054a829abeeef3eb0af6b3f94
the x_add/x_sub increments were wrong for u/v in the upscaling case.
They shouldn't be left to the caller's discretion, but set up by
WebPRescalerInit to their exact necessary values.
-> Cleaned-up WebPRescalerInit() param list.
-> added safety asserts
-> removed the mips32/mips_r2 variant of "ImportRow" which were buggy prior
Change-Id: I347c75804d835811e7025de92a0758d7929dfc09
this moves the function outside the WEBP_USE_INTRINSICS check.
there's no alternative version and it's ~54% faster at the
function level and mildly faster overall
Change-Id: Ibc648e9ee35021d48901e05aa596aa01067796a2
a total impact of 1 % on encoding speed
This allows for performance neutral removal of the binary search
in cache bits selection. This will give a small improvement in
compression density.
Change-Id: If5d4d59460fa1924ce71af977320834a47c2054a
0.21 % compression density improvement for 1000 png corpus in
lossless mode
0.50 % compression density improvement for 1000 png corpus in
lossy mode
Change-Id: I14ee8c427ae5d3e116b0ee6695fcdea3321a319d
valgrind --tool=callgrind shows a 9 % speedup: 1021201984 ticks before vs.
927917709 after
-q 0 -m 0 -lossless ~/alpi/1.png
22.040 MP/s before
24.796 MP/s after
Change-Id: Iaab928167b3e20fb0d9401c6f8317a26c5a610b4
* changes:
lossless: combine the Huffman code with extra bits
lossless: Inlining add literal
lossless: simplify HashChainFindCopy heuristics
lossless: 0.5 % compression density improvement
lossless: Add zeroes into the predicted histograms.
lossless: encoding, don't compute unnecessary histo
lossless: Remove about 25 % of the speed degradation
Faster alpha coding for webp
lossless: rle mode not to accept lengths smaller than 4.
lossless: Less code for the entropy selection
lossless: 0.37 % compression density improvement
_BitScanReverse() takes an unsigned long*
http://msdn.microsoft.com/en-us/library/fbxyd7zd.aspx
fixes:
C4057: 'function': 'unsigned long *' differs in indirection to slightly
different base types from 'uint32_t *'
fixes issue #253
Change-Id: I0101ef7be18c7ed188b35e9b17e7f71290953786
do not do length 2 matches far away
speedup for non compressible data by inserting two literals at a time
when no matches are found
Change-Id: Ia8e033071f4186bb8148bb2bf13ca37586734aa3
Increases compression density by 0.03 % for lossy.
Speeds up at least one of the lossy alpha images by 20 %.
Palette entropy 'kludge' seems to save 1-2 % on alpha images.
Change-Id: I2116b8d81593ac8173bfba54a7c833997fca0804
share the computation between different modes
3-5 % speedup for lossless alpha
1 % for lossy alpha
no change in compression density
Change-Id: I5e31413b3efcd4319121587da8320ac4f14550b2
introduced in:
"lossless: 0.37 % compression density improvement"
Uses the statistics of red and blue histograms to decide if to run
cross color correction at all.
Improves compression density by 0.02 % or so.
Change-Id: I47429557e9cdbd9fa90c584696f241b17427d73f
No significant size degradation (+0.001 %) for 1000 image corpus
Fixes the 8 ms vs 2 ms degradation from:
"lossless: 0.37 % compression density improvement"
Change-Id: Id540169a305d9d5c6213a82b46c879761b3ca608
counting the entropy expectation for five different configurations:
palette
non-predicted
non-predicted with subtract green
predicted
predicted with subtract green
and choose the strategy with the smallest expected entropy
Change-Id: Iaaf209c0d565660a54a4f9b3959067afb9951960
this should be used in preference to free() for releasing memory
returned from WebPDecode*() / WebPEncode*(). this simplifies memory
management when working through language bindings
Change-Id: I15eb538a45390efc552fda8e5c251a3fbdc13c29
After several trials at re-organizing the main loop and accumulation scheme,
this is apparently the faster variant.
removed the SSE41 version, which is no longer faster now.
For some reason, the AVX variant seems to benefit most for the change.
Change-Id: Ib11ee18dbb69596cee1a3a289af8e2b4253de7b5
this moves the function outside the WEBP_USE_INTRINSICS check.
there's no alternative version and it's ~70% faster at the
function level and 1-2% faster overall
Change-Id: I59fb4918ec86b1ac3a47cbd5d05ce62f007461cb
Changed the code (again) to process 4 pixels at a time. Loop is more
involved, but overall it's faster.
Removed the SSE4.1 implementation which is now slower than SSE2.
Change-Id: I7734e371033ad8929ace7f7e1373ba930d9bb5f1
New implementations: SubtractGreenFromBlueAndRed and TransformColor
around 1-2% faster lossless encoding.
Change-Id: I1668e36fdc316ba55b3b798b91b4a3e36ce62861
DispatchAlpha* functions are hard to speed up, compared to SSE2.
ExtractAlpha sees a ~15% speed-up though.
Change-Id: I8715c2defecbc832f469eed7e6ffd012146b52de
over a 1000 image corpus
Single photograph benchmark:
Before:
Q=20: 2.560 MP/s
Q=40: 2.593 MP/s
Q=60: 1.795 MP/s
Q=80: 1.603 MP/s
Q=99: 1.122 MP/s
After:
Q=20: 3.334 MP/s
Q=40: 2.464 MP/s
Q=60: 2.009 MP/s
Q=80: 1.871 MP/s
Q=99: 1.163 MP/s
This CL allows for some further improvements that would not be possible
otherwise.
Change-Id: I61ba154beca2266cb96469281cf96e84a4412586
use vld1_dup_u8() rather than a separate ld+dup after the values were
zero extended; mildly faster at the function level
Change-Id: I1b3666a6aeb465722a1214dbc6d71c27689a7f89
VP8EncPredChroma8 improvements over ~20M pixels
left/top: ~67%
left-only: ~52%
top-only: ~57%
none: ~61%
based on dec_sse2 versions with minor changes to benefit from the linear
storage of the left boundary
Change-Id: Iee7e387fb2570b4eb5af5bfd123e9c2e9ea49c76
VP8EncPredLuma16 improvements over ~20M pixels
left/top: ~75%
left-only: ~47%
top-only: ~59%
none: ~63%
based on dec_sse2 versions with minor changes to benefit from the linear
storage of the left boundary
Change-Id: I7548be7214fa85c38fd11d30f5b8b271f437657d
structured extended feature flags require eax = 7; avoids incorrectly
detecting avx2 on some older processors that support avx.
for completeness also check for value=1 support used by the other
checks.
from [1]:
INPUT EAX = 0: Returns CPUID’s Highest Value for Basic Processor
Information and the Vendor Identification String
[1]
http://www.intel.com/content/www/us/en/processors/processor-identification-cpuid-instruction-note.html
Change-Id: I60b20d661a978d551614dbf7acdc25db19cb6046
* make VP8LPrefetchBits() safe wrt past-EOS reads
* set 'BitReader::bits_" to a safe shifting value upon EOS
no visible performance difference on x86
Change-Id: I0a4177928cfa81d5dfc9054b36a686eaa1bf8c65
Speed-wise equivalent on x86 and ARM (maybe a tad faster, hard to tell).
Note that the two 32-bit multiples are not strictly equivalent
to the 64-bit one, since we're missing one carry propagation.
In practice, no observable difference was seen because of this
slightly different hashing result.
Change-Id: I8f2381175eae1cb20dabf149e6b27e1768fba6ab
update makefile.unix to provide 'make extras' building instructions.
note: input ordering depends on WEBP_SWAP_16BIT_CSP for rgb565 and rgb4444
Change-Id: I6f22d32189d9ba2619146a9714cedabfe28e2ad0
When converting from video sources, the duration of current frame
is often unavailable until the next frame. So, we internally convert
timestamps to durations.
Change-Id: I20ad86361c22e014be7eb91f00d5d40108281351
use psadbw to perform top row summation; left remains in C as repacking
it into a vector to apply the same operation is too costly.
DC8uv: ~19% faster
DC8uvNoLeft: ~12% faster
Change-Id: I707c4f6177a65b5d1f2d3deeca87d2bb740185e2
use psadbw to perform top row summation; left remains in C as repacking
it into a vector to apply the same operation is too costly.
DC16: ~20% faster
DC16NoLeft: ~14% faster
Change-Id: I7ec3f8a6e5923f88a530f79fceb88d5001bef691
generates a stub function when the specific architecture is not enabled,
exposing a symbol in the module, avoiding a compiler warning
Change-Id: Ia9336e57466a9b5241b85c1c95838e91c9283147
had to rename few structs.
-> we can now include both vp8i.h and vp8enci.h without naming
conflicts.
Change-Id: Ib41b498f1b57aab3d6b796361afc45210ec75174
Visible speed-up, thanks to pshufb and pabsw and psignw use.
had to tweak configure.ac to make "smmintri.h" presence correctly
detected (we need to set the CPPFLAGS instead of the CFLAGS!)
Change-Id: I2ab99e16a27a64fdf1f09b2b4e30a5e74ccca080
allows the former to be inlined; negligible speed-up in most cases,
however this is structure is consistent with the rest of the optimized
modules
Change-Id: Ib080240b06f7a995b47f1906627850c355b82901
we look at average global improvement and stop when things are
moving slow, or when we had a quite good first iteration already
(means: the picture is "not difficult")
Change-Id: I8ab7d100353039b5b32bb5fac3fe03c8440c78d5
Speedup method StoreImageToBitMask by replacing the code to find histogram
index and Huffman tree codes at every iteration to a more optimal code that
updates these only when the current pixel (to write) crosses the histogram
tile-row boundary.
This change speeds up the StoreImageToBitMask method by 5%.
Change-Id: If01a1ccd7820f9a3a3e5bc449d070defa51be14b
the standard vtbl functions are available there [1][2].
based on a patch from: aaroncrespo
fixes issue #243.
[1]
http://adcdownload.apple.com//Developer_Tools/Xcode_6.3_beta/Xcode_6.3_beta_Release_Notes.pdf
[2] Apple LLVM Compiler Version 6.1
- Xcode 6.3 updates the Apple LLVM compiler to version 6.1.0.
[...]
Support for the arm64 architecture has been significantly revised to
align with ARM's implementation, where the most visible impact is that a
few of the vector intrinsics have changed to match ARM's specifications.
Change-Id: I79a0016f44b9dbe36d0373f7f00a50ab3c2ca447
The MIPS code for cost is not updated yet, that's why i keep Residual::*cost
around for now. Should be removed in favor of *costs later.
Change-Id: Id1d09a8c37ea8c5b34ad5eb8811d6a3ec6c4d89f
affected functions: SimpleVFilter16, SimpleHFilter16,
SimpleVFilter16i and SimpleHFilter16i
noticed bug in FilterLoop26 (fix included in this patch)
Change-Id: I72d9c1e45cbac6393eba52bb549b04924d463e30
removes circular dependency between dsp and enc.
since:
a987fae MIPS: dspr2: added optimization for function GetResidualCost
Change-Id: Ifeb8fc02de89e2ba982ed7ffacd925d649bfec3c
kGammaFix is now only defined with USE_GAMMA_COMPRESSION;
fixes:
use of undeclared identifier 'kGammaFix'
Change-Id: Ib1e2f410eff9b83be065894f88181f91dd2776e1
set/get residual C functions moved to new file in src/dsp
mips32 version of GetResidualCost moved to new file
Change-Id: I7cebb7933a89820ff28c187249a9181f281081d2
the input to the function is non-const and the pointer being operated is
being free'd; removes an unnecessary cast in the process
Change-Id: Ic515ed672ddf7f8e4e36eeac696ff7aa8a3652f7
Updated the near-lossless level mapping and make it correlated to lossy
quality i.e 100 => minimum loss (in-fact no-loss) and the visual-quality loss
increases with decrease in near-lossless level (quality) till value 0.
The new mapping implies following (PSNR) loss-metric:
-near_lossless 100: No-loss (bit-stream same as -lossless).
-near_lossless 80: Very very high PSNR (around 54dB).
-near_lossless 60: Very high PSNR (around 48dB).
-near_lossless 40: High PSNR (around 42dB).
-near_lossless 20: Moderate PSNR (around 36dB).
-near_lossless 0: Low PSNR (around 30dB).
Change-Id: I930de4b18950faf2868c97d42e9e49ba0b642960
DitherRow() only checks this value, not 'skip_' so previously it was
uninitialized for these blocks.
Change-Id: I0f698b81854ee9d91edacb51c1e3bdab9cba96f2
similar to:
1ba61b0 enable NEON intrinsics in aarch64 builds
vtbl1_u8 is available everywhere but Xcode-based iOS arm64 builds, use
vtbl1q_u8 there.
performance varies based on the input, 1-3% on encode was observed
Change-Id: Ifec35b37eb856acfcf69ed7f16fa078cd40b7034
AnalyzeSubtractGreen constitutes about 8-10% of the comression CPU cycles.
Statistically, subtract-green is proved to be useful for most of the
non-palette compression. So instead of evaluating the entropy (by calling
AnalyzeSubtractGreen) apply subtract-green transform for the low-effort
compression.
This changes speeds up the compression at m=0 by 8-10% (with very slight loss
of 0.07% in the compression density).
Change-Id: I9797dc39437ae089716acb14631bbc77d367acf4
Speed up AnalyzeSubtractGreen by looping through the image pixel once to
compute the two histograms.
AnalyzeEntropy code cleanup.
Removed some 'if' conditions and pointer indirections inside pixel iterate loop.
Change-Id: Ia65e3033988ff67df8e3ecce19d6e34cfc76358e
Enable the WebP near-lossless feature by pre-processing the image to smoothen
the pixels.
On a 1000 PNG image corpus, for which WebP lossless (default settings) gets
25% compression gains, following is the performance of near-lossless feature
at various '-near_lossless' levels:
-near_lossless 90: 30% (very very high PSNR 54-60dB)
-near_lossless 75: 38% (very high PSNR 48-54dB)
-near_lossless 50: 45% (high PSNR 42-48dB)
-near_lossless 25: 48% (moderate PSNR 36-42dB)
-near_lossless 10: 50% (PSNR 30-36dB)
WebP near-lossless is specifically useful for discrete-tone images like
line-art, icons etc.
Change-Id: I7d12a2c9362ccd076d09710ea05c85fa64664c38
Some frames that were previously selected as key-frames were incorrectly
being reset to sub-frames.
Change-Id: Iee342dbb9a9aec144b8185c3b54ca56aa7038bfb
The 'inverse' variants are harder to parallelize, since
the result of filtering is used for prediction.
The 'direct' way is relatively easier.
The heavy bottleneck left for optimization is still GradientUnfilter()
Change-Id: I358008f492a887e8fff6600cb27857b18dee86e9
Simplify and speedup backward references for low-effort settings by evaluating
LZ77 references only. This change speeds up compression by 10-25% at lower
(q <= 25) quality range with a slight drop (0.2%) in the compression density.
Change-Id: Ibd6f03b1a062d8ab9191786c2a425e9132e4779f
Cleaup Near-lossless code
- Simplified and refactored the code.
- Removed the requirement (TODO) to allocate the buffer of size WxH and work
with buffer of size 3xW.
- Disabled the Near-lossless prr-processing for small icon images (W < 64 and H < 64).
Change-Id: Id7ee90c90622368d5528de4dd14fd5ead593bb1b
Reported here: https://code.google.com/p/webp/issues/detail?id=239
At the beginning of method 'DecodeImageData', pixels up to
'dec->last_pixel_' are assumed to be already cached. So, at the end of
previous call to that method also, that assumption should hold true.
Hence, we should cache all pixels up to 'src' regardless of 'src_last'.
This affects lossless incremental decoding only, as that is when
src_last and src_end differ.
Note: alpha decoding is implicitly incremental, as alpha decoding of
only the rows 'y_end - y_start' happens during FinishRow() call. So, this bug
affects alpha decoding in non-incremental decoding flow as well.
This bug was introduced in: https://gerrit.chromium.org/gerrit/#/c/59716.
Change-Id: Ide6edfeb2609b02aff701e1bd9fd776da0a16be0
SanitizeEncoderOptions() was changing kmin to 2 too, which resulted in a
bad state with kmin == kmax.
Change-Id: Ie7273f1949bac469e7e6c8efbc98b154caf6de0f
* use the same TFIX == YFIX precision (2bits)
* use int instead of float in LinearToGammaF()
output is visually equivalent. Code is a little faster.
Change-Id: Ie3cfebca351dbcbd924b3d00801d6523dca6981f
check enc->argb_ to quiet an msvs /analyze warning:
C6387: 'enc->argb_+y*width' could be '0': this does not adhere to the
specification for the function 'memcpy'.
Change-Id: I87544e92ee0d3ea38942a475c30c6d552f9877b7
quiets an msvs /analyze warning, the cast is due to an earlier msvs
build warning.
C6297: Arithmetic overflow: 32-bit value is shifted, then cast to
64-bit value. Results might not be an expected value.
Change-Id: I0bb6cda57879f2fbd1e3515f6753a11bc08d14ac
and only use it on x86 / x64 where it's available.
has the side-effect of quieting a msvs /analyze warning:
C6001: Using uninitialized memory 'cpu_info'.
Change-Id: Iae51be3b22b2ee949cfc473eeea9fd9fb6b3c2cb
Disable costly TraceBackwards heuristic for computing the backward references
for low_effort (method=0) compression.
The TraceBackwards heuristic is already disabled for lower (q < 25) quality
range. Following is the compression data for 1000 image corpus for q >= 25.
This speeds up compression (q >= 25) by a factor of 2.5-3X with slight loss of
compression density (0.7% for lower quality range and 1.2% for higher qualities).
Change-Id: I256c9e2137c7de4083f423ea32ee12d3b0f46253
added new function CollectColorRedTransforms to C, which calls
TransformColorRed and it is realized via pointer to function
Change-Id: Ia68d73bfcf1ca2cb443dc2825910946221f87835
explicitly add immintrin.h instead of transitively picking it up via
windows.h presumably. makes the code easier to move around.
Change-Id: If70d5143ac94fc331da763ce034358858e460e06
added new function CollectColorBlueTransforms to C, which calls
TransformColorBlue and it is realized via pointer to function
Change-Id: Ia488b7a7a689223b5d33aae9724afab89b97fced
reported in https://code.google.com/p/webp/issues/detail?id=237
An empty partition #0 should be indicative of a bitstream error.
The previous code was correct, only an assert was triggered in debug mode.
But we might as well handle the case properly right away...
Change-Id: I4dc31a46191fa9e65659c9a5bf5de9605e93f2f5
