mirror of
https://github.com/linux-sunxi/meta-sunxi.git
synced 2025-07-16 22:09:47 +02:00
Compare commits
2 Commits
| Author | SHA1 | Date | |
|---|---|---|---|
| e5e624f30a | |||
| 196a7a6863 |
20
README.md
20
README.md
@ -3,9 +3,9 @@ meta-sunxi
|
||||
|
||||
Official sunxi OpenEmbedded layer for Allwinner-based boards.
|
||||
|
||||
This layer depends on the additional layers:
|
||||
This layer depends on the additional layer:
|
||||
|
||||
* [meta-openembedded/meta-oe](http://git.openembedded.org/meta-openembedded/tree/meta-oe)
|
||||
meta-openembedded: git://git.openembedded.org/meta-openembedded
|
||||
|
||||
Tested with core-image-base.
|
||||
|
||||
@ -14,30 +14,24 @@ Maintainers:
|
||||
* Nicolas Aguirre <aguirre.nicolas@gmail.com>
|
||||
* Enrico Butera <ebutera@users.sourceforge.net>
|
||||
* Sergey Lapin <slapin@ossfans.org>
|
||||
* Marek Belisko <marek.belisko@gmail.com>
|
||||
|
||||
Kernel / U-Boot Version
|
||||
===========
|
||||
Most Allwinner devices and hardware are supported in mainline kernel and U-Boot, so this layer builds mainline by default.
|
||||
There is a custom U-Boot and Kernel version for sunxi devices which includes some special drivers not mainlined.
|
||||
These versions are rather old (3.4 for kernel and 2014.04 for U-Boot), but may support more functions and devices than current mainline
|
||||
These versions are rather old (3.4 for kernel and 2014.04 for U-Boot), but may support more functions and devices than current mainline
|
||||
|
||||
If you want to switch back to sunxi versions for some reasons (no device tree available, unsupported hardware), either:
|
||||
- change the file conf/machine/include/sunxi.inc to include the following block
|
||||
- edit your conf/local.conf to add the following block
|
||||
|
||||
PREFERRED_PROVIDER_u-boot="u-boot-sunxi"
|
||||
PREFERRED_PROVIDER_virtual/bootloader="u-boot-sunxi"
|
||||
PREFERRED_PROVIDER_virtual/kernel="linux-sunxi"
|
||||
KERNEL_DEVICETREE = ""
|
||||
PREFERRED_PROVIDER_u-boot="u-boot-sunxi"
|
||||
PREFERRED_PROVIDER_virtual/bootloader="u-boot-sunxi"
|
||||
PREFERRED_PROVIDER_virtual/kernel="linux-sunxi"
|
||||
|
||||
If you already have built the mainline versions it might be necessary to reset the build directories with:
|
||||
|
||||
bitbake -c clean virtual/kernel virtual/bootloader
|
||||
|
||||
For mainline kernel we have now support for latest LTS, stable and bleeding edge (latest possible rc).
|
||||
By default we use latest LTS. If you would like to change version please update ```PREFERRED_VERSION_linux-mainline``` in:
|
||||
* [conf/machine/include/sunxi.inc](https://github.com/linux-sunxi/meta-sunxi/blob/4921234ed77f9df77c65c88637ce50468f65bde7/conf/machine/include/sunxi.inc#L16)
|
||||
bitbake -c clean linux u-boot
|
||||
|
||||
Performance
|
||||
===========
|
||||
|
||||
@ -71,16 +71,16 @@ IMAGE_CMD_sunxi-sdimg () {
|
||||
for DTS_FILE in ${KERNEL_DEVICETREE}; do
|
||||
DTS_BASE_NAME=`basename ${DTS_FILE} | awk -F "." '{print $1}'`
|
||||
DTS_DIR_NAME=`dirname ${DTS_FILE}`
|
||||
if [ -e ${DEPLOY_DIR_IMAGE}/"${DTS_BASE_NAME}.dtb" ]; then
|
||||
if [ -e ${DEPLOY_DIR_IMAGE}/"${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb" ]; then
|
||||
|
||||
if [ ${DTS_FILE} != ${DTS_BASE_NAME}.dtb ]; then
|
||||
mmd -i ${WORKDIR}/boot.img ::/${DTS_DIR_NAME}
|
||||
fi
|
||||
|
||||
kernel_bin="`readlink ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin`"
|
||||
kernel_bin_for_dtb="`readlink ${DEPLOY_DIR_IMAGE}/${DTS_BASE_NAME}.dtb | sed "s,$DTS_BASE_NAME,${KERNEL_IMAGETYPE},g;s,\.dtb$,.bin,g"`"
|
||||
kernel_bin_for_dtb="`readlink ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb | sed "s,$DTS_BASE_NAME,${MACHINE},g;s,\.dtb$,.bin,g"`"
|
||||
if [ $kernel_bin = $kernel_bin_for_dtb ]; then
|
||||
mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${DTS_BASE_NAME}.dtb ::/${DTS_FILE}
|
||||
mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb ::/${DTS_FILE}
|
||||
fi
|
||||
fi
|
||||
done
|
||||
|
||||
@ -7,11 +7,3 @@ BBFILES += "${LAYERDIR}/recipes*/*/*.bb ${LAYERDIR}/recipes*/*/*.bbappend"
|
||||
BBFILE_COLLECTIONS += "meta-sunxi"
|
||||
BBFILE_PATTERN_meta-sunxi := "^${LAYERDIR}/"
|
||||
BBFILE_PRIORITY_meta-sunxi = "10"
|
||||
|
||||
# This should only be incremented on significant changes that will
|
||||
# cause compatibility issues with other layers
|
||||
LAYERVERSION_meta-sunxi = "1"
|
||||
|
||||
LAYERDEPENDS_meta-sunxi = "core openembedded-layer"
|
||||
|
||||
LAYERSERIES_COMPAT_meta-sunxi = "zeus"
|
||||
|
||||
@ -1,6 +1,4 @@
|
||||
require conf/machine/include/sunxi64.inc
|
||||
|
||||
DEFAULTTUNE ?= "cortexa53-crypto"
|
||||
require conf/machine/include/tune-cortexa53.inc
|
||||
require conf/machine/include/arm/arch-armv8.inc
|
||||
|
||||
SOC_FAMILY = "sun50i"
|
||||
|
||||
@ -4,8 +4,6 @@ PREFERRED_PROVIDER_virtual/libgles1 ?= "sunxi-mali"
|
||||
PREFERRED_PROVIDER_virtual/libgles2 ?= "sunxi-mali"
|
||||
PREFERRED_PROVIDER_virtual/egl ?= "sunxi-mali"
|
||||
|
||||
PACKAGECONFIG_remove_pn-xserver-xorg = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'glamor', '', d)}"
|
||||
|
||||
XSERVER += "sunxi-mali \
|
||||
sunxi-mali-dev"
|
||||
|
||||
|
||||
@ -13,7 +13,6 @@ XSERVER = "xserver-xorg \
|
||||
xf86-input-keyboard"
|
||||
|
||||
PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
|
||||
PREFERRED_VERSION_linux-mainline ?= "4.19%"
|
||||
PREFERRED_PROVIDER_u-boot ?= "u-boot"
|
||||
PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
|
||||
|
||||
@ -27,6 +26,7 @@ MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"
|
||||
UBOOT_LOCALVERSION = "-g${@d.getVar('SRCPV', True).partition('+')[2][0:7]}"
|
||||
|
||||
UBOOT_ENTRYPOINT ?= "0x40008000"
|
||||
UBOOT_LOADADDRESS ?= "0x400080OB00"
|
||||
|
||||
SPL_BINARY ?= "u-boot-sunxi-with-spl.bin"
|
||||
|
||||
|
||||
@ -1,9 +0,0 @@
|
||||
#@TYPE: Machine
|
||||
#@NAME: nanopi M1 Plus
|
||||
#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo, based on the Allwinner H3 CPU
|
||||
|
||||
require conf/machine/include/sun8i.inc
|
||||
|
||||
KERNEL_DEVICETREE = "sun8i-h3-nanopi-m1-plus.dtb"
|
||||
UBOOT_MACHINE = "nanopi_m1_plus_defconfig"
|
||||
|
||||
@ -5,5 +5,7 @@
|
||||
|
||||
require conf/machine/include/sun8i.inc
|
||||
|
||||
PREFERRED_VERSION_u-boot = "v2017.11%"
|
||||
|
||||
KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo-air.dtb"
|
||||
UBOOT_MACHINE = "nanopi_neo_air_defconfig"
|
||||
|
||||
@ -1,9 +0,0 @@
|
||||
#@TYPE: Machine
|
||||
#@NAME: nanopi-neo-plus2
|
||||
#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo Plus2, based
|
||||
# on the Allwinner H5 SoC.
|
||||
|
||||
require conf/machine/include/sun50i.inc
|
||||
|
||||
KERNEL_DEVICETREE = "allwinner/sun50i-h5-nanopi-neo-plus2.dtb"
|
||||
UBOOT_MACHINE = "nanopi_neo_plus2_defconfig"
|
||||
@ -4,6 +4,8 @@
|
||||
|
||||
require conf/machine/include/sun8i.inc
|
||||
|
||||
PREFERRED_VERSION_u-boot = "v2017.11%"
|
||||
|
||||
KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo.dtb"
|
||||
UBOOT_MACHINE = "nanopi_neo_defconfig"
|
||||
|
||||
|
||||
@ -1,9 +0,0 @@
|
||||
#@TYPE: Machine
|
||||
#@NAME: nanopi-neo2
|
||||
#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo 2, based on
|
||||
# the Allwinner H5 SoC.
|
||||
|
||||
require conf/machine/include/sun50i.inc
|
||||
|
||||
KERNEL_DEVICETREE = "allwinner/sun50i-h5-nanopi-neo2.dtb"
|
||||
UBOOT_MACHINE = "nanopi_neo2_defconfig"
|
||||
@ -1,13 +0,0 @@
|
||||
#@TYPE: Machine
|
||||
#@NAME: Olimex A64-OLinuXino Board
|
||||
#@DESCRIPTION: Machine configuration for the Olimex A64-OLinuXino Board, based on Allwinner A64 CPU
|
||||
#https://github.com/OLIMEX/OLINUXINO
|
||||
|
||||
require conf/machine/include/sun50i.inc
|
||||
|
||||
PREFFERED_VERSION_u-boot = "v2018.09%"
|
||||
|
||||
MACHINE_EXTRA_RRECOMMENDS += " linux-firmware-rtl8723"
|
||||
|
||||
KERNEL_DEVICETREE = "allwinner/sun50i-a64-olinuxino.dtb"
|
||||
UBOOT_MACHINE = "a64-olinuxino_defconfig"
|
||||
@ -4,6 +4,8 @@
|
||||
|
||||
require conf/machine/include/sun8i.inc
|
||||
|
||||
PREFERRED_VERSION_u-boot = "v2017.11%"
|
||||
|
||||
KERNEL_DEVICETREE = "sun8i-h3-orangepi-one.dtb"
|
||||
UBOOT_MACHINE = "orangepi_one_defconfig"
|
||||
|
||||
|
||||
@ -4,6 +4,8 @@
|
||||
|
||||
require conf/machine/include/sun8i.inc
|
||||
|
||||
PREFERRED_VERSION_u-boot = "v2017.03%"
|
||||
|
||||
KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc-plus.dtb"
|
||||
UBOOT_MACHINE = "orangepi_pc_plus_defconfig"
|
||||
|
||||
|
||||
@ -4,6 +4,8 @@
|
||||
|
||||
require conf/machine/include/sun8i.inc
|
||||
|
||||
PREFERRED_VERSION_u-boot = "v2017.11%"
|
||||
|
||||
KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc.dtb"
|
||||
UBOOT_MACHINE = "orangepi_pc_defconfig"
|
||||
|
||||
|
||||
@ -5,5 +5,7 @@
|
||||
|
||||
require conf/machine/include/sun50i.inc
|
||||
|
||||
PREFERRED_VERSION_u-boot = "v2017.11%"
|
||||
|
||||
KERNEL_DEVICETREE = "allwinner/sun50i-h5-orangepi-zero-plus2.dtb"
|
||||
UBOOT_MACHINE = "orangepi_zero_plus2_defconfig"
|
||||
|
||||
@ -4,6 +4,8 @@
|
||||
|
||||
require conf/machine/include/sun8i.inc
|
||||
|
||||
PREFERRED_VERSION_u-boot = "v2017.11%"
|
||||
|
||||
KERNEL_DEVICETREE = "sun8i-h2-plus-orangepi-zero.dtb"
|
||||
UBOOT_MACHINE = "orangepi_zero_defconfig"
|
||||
|
||||
|
||||
@ -4,6 +4,8 @@
|
||||
|
||||
require conf/machine/include/sun4i.inc
|
||||
|
||||
PREFERRED_VERSION_u-boot = "v2017.11%"
|
||||
|
||||
KERNEL_DEVICETREE = "sun4i-a10-pcduino.dtb"
|
||||
UBOOT_MACHINE = "Linksprite_pcDuino_defconfig"
|
||||
SUNXI_FEX_FILE = "sys_config/a10/pcduino.fex"
|
||||
|
||||
@ -1,9 +0,0 @@
|
||||
#@TYPE: Machine
|
||||
#@NAME: pine64-plus
|
||||
#@DESCRIPTION: Machine configuration for the pine64-plus, based on Allwinner A64 CPU
|
||||
|
||||
|
||||
require conf/machine/include/sun50i.inc
|
||||
|
||||
KERNEL_DEVICETREE = "allwinner/sun50i-a64-pine64-plus.dtb"
|
||||
UBOOT_MACHINE = "pine64_plus_defconfig"
|
||||
@ -1,21 +0,0 @@
|
||||
From 6adb2ebdc4022c24497e9ee4dccab41d18e3105d Mon Sep 17 00:00:00 2001
|
||||
From: Florin Sarbu <florin@resin.io>
|
||||
Date: Wed, 12 Sep 2018 14:22:49 +0200
|
||||
Subject: [PATCH] nanopi_neo_air_defconfig: Enable eMMC support
|
||||
|
||||
Upstream-status: Pending
|
||||
Signed-off-by: Florin Sarbu <florin@resin.io>
|
||||
|
||||
---
|
||||
configs/nanopi_neo_air_defconfig | 1 +
|
||||
1 file changed, 1 insertion(+)
|
||||
|
||||
diff --git a/configs/nanopi_neo_air_defconfig b/configs/nanopi_neo_air_defconfig
|
||||
index 5ad90ddd16..8b7a4eb45d 100644
|
||||
--- a/configs/nanopi_neo_air_defconfig
|
||||
+++ b/configs/nanopi_neo_air_defconfig
|
||||
@@ -15,3 +15,4 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-neo-air"
|
||||
CONFIG_USB_EHCI_HCD=y
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
|
||||
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
|
||||
12
recipes-bsp/u-boot/files/u-boot-pylibfdt-native-build.patch
Normal file
12
recipes-bsp/u-boot/files/u-boot-pylibfdt-native-build.patch
Normal file
@ -0,0 +1,12 @@
|
||||
diff --git a/tools/Makefile b/tools/Makefile
|
||||
index 5db2a54..54bd224 100644
|
||||
--- a/tools/Makefile
|
||||
+++ b/tools/Makefile
|
||||
@@ -134,6 +134,7 @@ tools/_libfdt.so: $(LIBFDT_SRCS) $(LIBFDT_SWIG)
|
||||
$(Q)unset CC; \
|
||||
unset CROSS_COMPILE; \
|
||||
LDFLAGS="$(HOSTLDFLAGS)" CFLAGS= VERSION="u-boot-$(UBOOTVERSION)" \
|
||||
+ CC="$(HOSTCC)" LDSHARED="$(HOSTLDSHARED)" \
|
||||
CPPFLAGS="$(_hostc_flags)" OBJDIR=tools \
|
||||
SOURCES="$(LIBFDT_SRCS) tools/libfdt.i" \
|
||||
SWIG_OPTS="-I$(srctree)/lib/libfdt -I$(srctree)/lib" \
|
||||
@ -20,9 +20,8 @@ UBOOT_MACHINE_meleg = "Mele_A1000G_config"
|
||||
|
||||
SRC_URI = " \
|
||||
git://github.com/linux-sunxi/u-boot-sunxi.git;protocol=git;branch=sunxi \
|
||||
file://0001-gcc5-fixes.patch \
|
||||
file://0002-gcc6-fixes.patch \
|
||||
file://0003-No-gcc-version-specific-includes.patch \
|
||||
file://0002-gcc5-fixes.patch \
|
||||
file://0003-gcc6-fixes.patch \
|
||||
"
|
||||
|
||||
PE = "1"
|
||||
@ -36,7 +35,3 @@ S = "${WORKDIR}/git"
|
||||
PACKAGE_ARCH = "${MACHINE_ARCH}"
|
||||
|
||||
SPL_BINARY="u-boot-sunxi-with-spl.bin"
|
||||
|
||||
do_configure () {
|
||||
oe_runmake -C ${S} O=${B} ${UBOOT_MACHINE}
|
||||
}
|
||||
|
||||
@ -1,24 +0,0 @@
|
||||
From bc4aa5814cbedbfaa1c79dfe7ea2571fee7f2d51 Mon Sep 17 00:00:00 2001
|
||||
From: Andrey Lebedev <andrey@lebedev.lt>
|
||||
Date: Wed, 22 Jan 2020 20:00:11 +0200
|
||||
Subject: [PATCH] No gcc version-specific includes
|
||||
|
||||
In order to support gcc-5 and above. Fixes compilation errors like
|
||||
|
||||
linux/compiler-gcc9.h: No such file or directory
|
||||
---
|
||||
include/linux/compiler-gcc.h | 1 -
|
||||
1 file changed, 1 deletion(-)
|
||||
|
||||
diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
|
||||
index 9896e547b9..5f0bd65f3a 100644
|
||||
--- a/include/linux/compiler-gcc.h
|
||||
+++ b/include/linux/compiler-gcc.h
|
||||
@@ -90,4 +90,3 @@
|
||||
#define __gcc_header(x) #x
|
||||
#define _gcc_header(x) __gcc_header(linux/compiler-gcc##x.h)
|
||||
#define gcc_header(x) _gcc_header(x)
|
||||
-#include gcc_header(__GNUC__)
|
||||
--
|
||||
2.20.1
|
||||
|
||||
@ -1,8 +1,13 @@
|
||||
FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
|
||||
DESCRIPTION="Upstream's U-boot configured for sunxi devices"
|
||||
|
||||
DEPENDS += " bc-native dtc-native swig-native python3-native flex-native bison-native "
|
||||
require recipes-bsp/u-boot/u-boot.inc
|
||||
|
||||
DEPENDS += " bc-native dtc-native swig-native python3-native "
|
||||
DEPENDS_append_sun50i = " atf-sunxi "
|
||||
|
||||
LICENSE = "GPLv2+"
|
||||
LIC_FILES_CHKSUM = "file://Licenses/README;md5=a2c678cfd4a4d97135585cad908541c6"
|
||||
|
||||
COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
|
||||
|
||||
DEFAULT_PREFERENCE_sun4i="1"
|
||||
@ -11,11 +16,18 @@ DEFAULT_PREFERENCE_sun7i="1"
|
||||
DEFAULT_PREFERENCE_sun8i="1"
|
||||
DEFAULT_PREFERENCE_sun50i="1"
|
||||
|
||||
SRC_URI += " \
|
||||
file://0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch \
|
||||
SRC_URI = "git://git.denx.de/u-boot.git;branch=master \
|
||||
file://u-boot-pylibfdt-native-build.patch \
|
||||
file://boot.cmd \
|
||||
"
|
||||
|
||||
SRCREV = "c253573f3e269fd9a24ee6684d87dd91106018a5"
|
||||
|
||||
PV = "v2017.11+git${SRCPV}"
|
||||
PE = "2"
|
||||
|
||||
S = "${WORKDIR}/git"
|
||||
|
||||
UBOOT_ENV_SUFFIX = "scr"
|
||||
UBOOT_ENV = "boot"
|
||||
|
||||
@ -31,7 +31,7 @@ SRC_URI = "gitsm://github.com/linux-sunxi/sunxi-mali.git \
|
||||
|
||||
S = "${WORKDIR}/git"
|
||||
|
||||
DEPENDS = "libdrm xorgproto libump patchelf-native"
|
||||
DEPENDS = "libdrm dri2proto libump"
|
||||
|
||||
PACKAGECONFIG ??= "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11', '', d)} ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland', '', d)}"
|
||||
PACKAGECONFIG[wayland] = "EGL_TYPE=framebuffer,,,"
|
||||
@ -70,13 +70,11 @@ do_install() {
|
||||
|
||||
make libdir=${D}${libdir}/ includedir=${D}${includedir}/ install
|
||||
make libdir=${D}${libdir}/ includedir=${D}${includedir}/ install -C include
|
||||
rm -f ${D}${includedir}/KHR/khrplatform.h
|
||||
|
||||
# Fix .so name and create symlinks, binary package provides .so wich can't be included directly in package without triggering the 'dev-so' QA check
|
||||
# Packages like xf86-video-fbturbo dlopen() libUMP.so, so we do need to ship the .so files in ${PN}
|
||||
|
||||
mv ${D}${libdir}/libMali.so ${D}${libdir}/libMali.so.3
|
||||
patchelf --set-soname libMali.so.3 ${D}${libdir}/libMali.so.3
|
||||
ln -sf libMali.so.3 ${D}${libdir}/libMali.so
|
||||
|
||||
for flib in libEGL.so.1.4 libGLESv1_CM.so.1.1 libGLESv2.so.2.0 ; do
|
||||
|
||||
@ -3,7 +3,7 @@ DESCRIPTION = "Library for the DRI2 extension to the X Window System"
|
||||
LICENSE = "MIT-X"
|
||||
LIC_FILES_CHKSUM = "file://COPYING;md5=827da9afab1f727f2a66574629e0f39c"
|
||||
|
||||
DEPENDS = "libdrm libxext libxfixes xorgproto"
|
||||
DEPENDS = "libdrm libxext xextproto libxfixes dri2proto"
|
||||
|
||||
PE = "1"
|
||||
PV = "1.0.0+git${SRCPV}"
|
||||
|
||||
@ -5,7 +5,7 @@ DESCRIPTION = "X.Org X server -- A10/A13 display driver"
|
||||
LICENSE = "MIT-X"
|
||||
LIC_FILES_CHKSUM = "file://COPYING;md5=f91dc3ee5ce59eb4b528e67e98a31266"
|
||||
|
||||
DEPENDS += "sunxi-mali libump xorgproto"
|
||||
DEPENDS += "sunxi-mali libump xf86driproto"
|
||||
|
||||
PE = "3"
|
||||
PV = "0.5.1+git${SRCPV}"
|
||||
|
||||
@ -0,0 +1,29 @@
|
||||
From 1596e282f52c8f43fd1cc4a39096f28563558a5c Mon Sep 17 00:00:00 2001
|
||||
From: Sergey Matyukevich <geomatsi@gmail.com>
|
||||
Date: Fri, 3 Nov 2017 22:12:43 +0300
|
||||
Subject: [PATCH 1/2] arm64: dts: orange-pi-zero-plus2: fix sdcard detect
|
||||
|
||||
The sdcard detect pin on orange-pi-zero-plus2 is pulled up.
|
||||
Fix cd-gpio description to enable sdcard detect.
|
||||
|
||||
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
|
||||
---
|
||||
arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
|
||||
index b6b7a561df8c..a42fd79a62a3 100644
|
||||
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
|
||||
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
|
||||
@@ -71,7 +71,7 @@
|
||||
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
|
||||
vmmc-supply = <®_vcc3v3>;
|
||||
bus-width = <4>;
|
||||
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
|
||||
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
--
|
||||
2.11.0
|
||||
|
||||
@ -0,0 +1,74 @@
|
||||
From 4d470855525b5993e766ad9f9304482739ba918d Mon Sep 17 00:00:00 2001
|
||||
From: Sergey Matyukevich <geomatsi@gmail.com>
|
||||
Date: Fri, 3 Nov 2017 22:24:45 +0300
|
||||
Subject: [PATCH 2/2] arm64: dts: orange-pi-zero-plus2: enable AP6212a WiFi/BT
|
||||
combo
|
||||
|
||||
Enable AP6212a WiFi/BT combo chip on orange-pi-zero-plus2 board:
|
||||
- WiFi SDIO interface is connected to MMC1
|
||||
- WiFi REG_ON pin connected to gpio PA9: attach to mmc-pwrseq
|
||||
- WiFi HOST_WAKE pin connected to gpio PL7
|
||||
- BT is connected to UART1
|
||||
|
||||
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
|
||||
---
|
||||
.../allwinner/sun50i-h5-orangepi-zero-plus2.dts | 32 ++++++++++++++++++++++
|
||||
1 file changed, 32 insertions(+)
|
||||
|
||||
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
|
||||
index a42fd79a62a3..d415b7b67cce 100644
|
||||
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
|
||||
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
|
||||
@@ -64,6 +64,13 @@
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
+
|
||||
+ wifi_pwrseq: wifi_pwrseq {
|
||||
+ compatible = "mmc-pwrseq-simple";
|
||||
+ pinctrl-names = "default";
|
||||
+ reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
|
||||
+ post-power-on-delay-ms = <200>;
|
||||
+ };
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
@@ -75,6 +82,25 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
+&mmc1 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&mmc1_pins_a>;
|
||||
+ vmmc-supply = <®_vcc3v3>;
|
||||
+ vqmmc-supply = <®_vcc3v3>;
|
||||
+ mmc-pwrseq = <&wifi_pwrseq>;
|
||||
+ bus-width = <4>;
|
||||
+ non-removable;
|
||||
+ status = "okay";
|
||||
+
|
||||
+ brcmf: wifi@1 {
|
||||
+ reg = <1>;
|
||||
+ compatible = "brcm,bcm4329-fmac";
|
||||
+ interrupt-parent = <&r_pio>;
|
||||
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
|
||||
+ interrupt-names = "host-wake";
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
&mmc2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc2_8bit_pins>;
|
||||
@@ -90,3 +116,9 @@
|
||||
pinctrl-0 = <&uart0_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
+
|
||||
+&uart1 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
--
|
||||
2.11.0
|
||||
|
||||
@ -9,22 +9,18 @@ This patch was originally submitted by Jelle van der Waa. Martin Kelly
|
||||
modified it to compile on the latest kernel, fixed up some review
|
||||
comments from Maxime Ripard, and re-tested the patch.
|
||||
|
||||
The patch has been reworked to add back eMMC support which has been left
|
||||
out at the last backport.
|
||||
|
||||
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
|
||||
Cc: linux-sunxi@googlegroups.com
|
||||
Cc: devicetree@vger.kernel.org
|
||||
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
|
||||
Signed-off-by: Martin Kelly <mkelly@xevo.com>
|
||||
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
||||
Signed-off-by: Florin Sarbu <florin@resin.io>
|
||||
---
|
||||
arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts | 34 +++++++++++++++++++++++++++
|
||||
1 file changed, 34 insertions(+)
|
||||
arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts | 24 ++++++++++++++++++++++++
|
||||
1 file changed, 24 insertions(+)
|
||||
|
||||
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
|
||||
index 03ff6f8..a9331fe 100644
|
||||
index 03ff6f8b93ff..920849092cc8 100644
|
||||
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
|
||||
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
|
||||
@@ -72,6 +72,11 @@
|
||||
@ -39,7 +35,7 @@ index 03ff6f8..a9331fe 100644
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
@@ -84,6 +89,35 @@
|
||||
@@ -84,6 +89,25 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -61,16 +57,6 @@ index 03ff6f8..a9331fe 100644
|
||||
+ interrupt-names = "host-wake";
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&mmc2 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&mmc2_8bit_pins>;
|
||||
+ vmmc-supply = <®_vcc3v3>;
|
||||
+ vqmmc-supply = <®_vcc3v3>;
|
||||
+ bus-width = <8>;
|
||||
+ non-removable;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
|
||||
@ -141,11 +141,6 @@ CONFIG_BT_LEDS=y
|
||||
# CONFIG_BT_DEBUGFS is not set
|
||||
CONFIG_BT_HCIUART=m
|
||||
CONFIG_BT_HCIUART_LL=y
|
||||
CONFIG_WIRELESS=y
|
||||
CONFIG_WIRELESS_EXT=y
|
||||
CONFIG_WEXT_CORE=y
|
||||
CONFIG_WEXT_PROC=y
|
||||
CONFIG_WEXT_PRIV=y
|
||||
CONFIG_CFG80211=m
|
||||
CONFIG_MAC80211=m
|
||||
CONFIG_MAC80211_LEDS=y
|
||||
@ -436,11 +431,6 @@ CONFIG_USB_QCOM_8X16_PHY=y
|
||||
CONFIG_USB_ULPI=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_RENESAS_USBHS_UDC=m
|
||||
CONFIG_USB_MUSB_HDRC=y
|
||||
# Restrict to host mode, as it is hard-coded that way in the device tree
|
||||
# (dr_mode = "host" in the &usb_otg node)
|
||||
CONFIG_USB_MUSB_HOST=y
|
||||
CONFIG_USB_MUSB_SUNXI=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_BLOCK_MINORS=32
|
||||
CONFIG_MMC_ARMMMCI=y
|
||||
@ -499,8 +489,6 @@ CONFIG_VIRTIO_BALLOON=y
|
||||
CONFIG_VIRTIO_MMIO=y
|
||||
CONFIG_XEN_GNTDEV=y
|
||||
CONFIG_XEN_GRANT_DEV_ALLOC=y
|
||||
CONFIG_STAGING=y
|
||||
CONFIG_RTL8723BS=m
|
||||
CONFIG_COMMON_CLK_RK808=y
|
||||
CONFIG_COMMON_CLK_SCPI=y
|
||||
CONFIG_COMMON_CLK_CS2000_CP=y
|
||||
|
||||
@ -1,100 +0,0 @@
|
||||
From 055155f463693e61f9018a011ad600d872d6736f Mon Sep 17 00:00:00 2001
|
||||
From: Marek Belisko <marek.belisko@open-nandra.com>
|
||||
Date: Fri, 2 Aug 2019 14:46:10 +0200
|
||||
Subject: [PATCH] dts: orange-pi-zero: Add wifi support
|
||||
|
||||
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
|
||||
---
|
||||
arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 47 ++++++++++++++++++-----
|
||||
1 file changed, 37 insertions(+), 10 deletions(-)
|
||||
|
||||
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
|
||||
index 84cd9c0..77b2fc6 100644
|
||||
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
|
||||
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
|
||||
@@ -80,13 +80,14 @@
|
||||
};
|
||||
};
|
||||
|
||||
- reg_vcc_wifi: reg_vcc_wifi {
|
||||
- compatible = "regulator-fixed";
|
||||
- regulator-min-microvolt = <3300000>;
|
||||
- regulator-max-microvolt = <3300000>;
|
||||
- regulator-name = "vcc-wifi";
|
||||
- enable-active-high;
|
||||
+ vdd_wifi: vdd_wifi {
|
||||
+ regulator-name = "wifi";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
|
||||
+ startup-delay-us = <70000>;
|
||||
+ enable-active-high;
|
||||
+
|
||||
};
|
||||
|
||||
reg_vdd_cpux: vdd-cpux-regulator {
|
||||
@@ -106,10 +107,12 @@
|
||||
1300000 1>;
|
||||
};
|
||||
|
||||
- wifi_pwrseq: wifi_pwrseq {
|
||||
+ pwrseq_wifi: pwrseq_wifi {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&wifi_rst>;
|
||||
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
|
||||
- post-power-on-delay-ms = <200>;
|
||||
+ post-power-on-delay-ms = <50>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -140,9 +143,11 @@
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
- vmmc-supply = <®_vcc_wifi>;
|
||||
- mmc-pwrseq = <&wifi_pwrseq>;
|
||||
+ vmmc-supply = <®_vcc3v3>;
|
||||
+ vqmmc-supply = <&vdd_wifi>;
|
||||
+ mmc-pwrseq = <&pwrseq_wifi>;
|
||||
bus-width = <4>;
|
||||
+ max-frequency = <16000000>;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
|
||||
@@ -152,6 +157,13 @@
|
||||
*/
|
||||
xr819: sdio_wifi@1 {
|
||||
reg = <1>;
|
||||
+ compatible = "xradio,xr819";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&wifi_wake>;
|
||||
+ interrupt-parent = <&pio>;
|
||||
+ interrupts = <6 10 IRQ_TYPE_EDGE_RISING>;
|
||||
+ interrupt-names = "host-wake";
|
||||
+ local-mac-address = [dc 44 6d c0 ff ee];
|
||||
};
|
||||
};
|
||||
|
||||
@@ -208,3 +220,18 @@
|
||||
status = "okay";
|
||||
usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
|
||||
};
|
||||
+
|
||||
+&pio {
|
||||
+ wifi_wake: wifi_wake {
|
||||
+ pins = "PG10";
|
||||
+ function = "gpio_in";
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&r_pio {
|
||||
+ wifi_rst: wifi_rst {
|
||||
+ pins = "PL7";
|
||||
+ function = "gpio_out";
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
--
|
||||
2.7.4
|
||||
|
||||
@ -1,7 +1,7 @@
|
||||
SECTION = "kernel"
|
||||
DESCRIPTION = "Mainline Longterm Linux kernel"
|
||||
DESCRIPTION = "Mainline Linux kernel"
|
||||
LICENSE = "GPLv2"
|
||||
LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
|
||||
LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
|
||||
COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
|
||||
|
||||
inherit kernel
|
||||
@ -18,15 +18,13 @@ RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"
|
||||
KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
|
||||
|
||||
S = "${WORKDIR}/linux-${PV}"
|
||||
|
||||
SRC_URI[md5sum] = "bf96b6783a2d11178a2aaa3cf376f975"
|
||||
SRC_URI[sha256sum] = "293ec1ae0f6b3b4be83a217224b51d137f2163cf2d9d294eecf5d0a354e4e29d"
|
||||
|
||||
SRC_URI[md5sum] = "e1051f6b15d6399a5de2441dd4e15537"
|
||||
SRC_URI[sha256sum] = "ffc393a0c66f80375eacd3fb177b92e5c9daa07de0dcf947e925e049352e6142"
|
||||
|
||||
SRC_URI = "https://www.kernel.org/pub/linux/kernel/v4.x/linux-${PV}.tar.xz \
|
||||
file://0001-arm64-dts-orange-pi-zero-plus2-fix-sdcard-detect.patch \
|
||||
file://0002-arm64-dts-orange-pi-zero-plus2-enable-AP6212a-WiFi-B.patch \
|
||||
file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
|
||||
file://defconfig \
|
||||
"
|
||||
|
||||
SRC_URI_append_orange-pi-zero += "\
|
||||
file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
|
||||
"
|
||||
@ -1,34 +0,0 @@
|
||||
SECTION = "kernel"
|
||||
DESCRIPTION = "Mainline Stable Linux kernel"
|
||||
LICENSE = "GPLv2"
|
||||
LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
|
||||
COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
|
||||
|
||||
inherit kernel
|
||||
|
||||
require linux.inc
|
||||
|
||||
# Since we're not using git, this doesn't make a difference, but we need to fill
|
||||
# in something or kernel-yocto.bbclass will fail.
|
||||
KBRANCH ?= "master"
|
||||
|
||||
DEPENDS += "rsync-native"
|
||||
|
||||
# Pull in the devicetree files into the rootfs
|
||||
RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"
|
||||
|
||||
KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
|
||||
|
||||
S = "${WORKDIR}/linux-${PV}"
|
||||
|
||||
SRC_URI[md5sum] = "6f4ab59d6ac7311f4245fc359706a0b7"
|
||||
SRC_URI[sha256sum] = "78f3cfc6c20b10ff21c0bb22d7d257cab03781c44d8c5aae289f749f94f76649"
|
||||
|
||||
SRC_URI = "https://www.kernel.org/pub/linux/kernel/v5.x/linux-${PV}.tar.xz \
|
||||
file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
|
||||
file://defconfig \
|
||||
"
|
||||
|
||||
SRC_URI_append_orange-pi-zero += "\
|
||||
file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
|
||||
"
|
||||
@ -1,36 +0,0 @@
|
||||
SECTION = "kernel"
|
||||
DESCRIPTION = "Mainline RC Linux kernel"
|
||||
LICENSE = "GPLv2"
|
||||
LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
|
||||
COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
|
||||
|
||||
inherit kernel
|
||||
|
||||
require linux.inc
|
||||
|
||||
# Since we're not using git, this doesn't make a difference, but we need to fill
|
||||
# in something or kernel-yocto.bbclass will fail.
|
||||
KBRANCH ?= "master"
|
||||
|
||||
DEPENDS += "rsync-native"
|
||||
|
||||
# Pull in the devicetree files into the rootfs
|
||||
RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"
|
||||
|
||||
KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
|
||||
|
||||
S = "${WORKDIR}/linux-${PV}"
|
||||
|
||||
SRC_URI[md5sum] = "58b2b15fb3c429948051ce4f12f30c37"
|
||||
SRC_URI[sha256sum] = "b07532aa008438e0bce2b8f0253079a4f1654a048a75ae1477c8826f32feea7a"
|
||||
|
||||
SRC_URI = "https://git.kernel.org/torvalds/t/linux-${PV}.tar.gz \
|
||||
file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
|
||||
file://defconfig \
|
||||
"
|
||||
SRC_URI_append_orange-pi-zero += "\
|
||||
file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
|
||||
"
|
||||
|
||||
FILES_${KERNEL_PACKAGE_NAME}-base_append = " ${nonarch_base_libdir}/modules/${KERNEL_VERSION}/modules.builtin.modinfo"
|
||||
|
||||
29
recipes-kernel/linux/linux-mainline_git.bb
Normal file
29
recipes-kernel/linux/linux-mainline_git.bb
Normal file
@ -0,0 +1,29 @@
|
||||
SECTION = "kernel"
|
||||
DESCRIPTION = "Mainline Linux kernel"
|
||||
LICENSE = "GPLv2"
|
||||
LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
|
||||
COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i)"
|
||||
|
||||
inherit kernel
|
||||
|
||||
require linux.inc
|
||||
|
||||
KBRANCH ?= "master"
|
||||
|
||||
# Pull in the devicetree files into the rootfs
|
||||
RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"
|
||||
|
||||
# Default is to use stable kernel version
|
||||
# If you want to use latest git version set to "1"
|
||||
DEFAULT_PREFERENCE = "-1"
|
||||
|
||||
KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
|
||||
|
||||
# 4.15-rc1
|
||||
PV = "4.15+git${SRCPV}"
|
||||
SRCREV_pn-${PN} = "4fbd8d194f06c8a3fd2af1ce560ddb31f7ec8323"
|
||||
|
||||
SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git;protocol=git;branch=master \
|
||||
file://defconfig \
|
||||
"
|
||||
S = "${WORKDIR}/git"
|
||||
@ -1,29 +0,0 @@
|
||||
From 25a7e85eb0d58479f7d8895b1b29a648bd07d60e Mon Sep 17 00:00:00 2001
|
||||
From: Andrey Lebedev <andrey@lebedev.lt>
|
||||
Date: Mon, 20 Jan 2020 23:19:51 +0200
|
||||
Subject: [PATCH 2/2] Fix asm error in put_user under gcc version 8 and above
|
||||
|
||||
Fixes these errors during compilation of linux-sunxi-3.4 kernel:
|
||||
/tmp/ccCGMQmS.s:648: Error: .err encountered
|
||||
|
||||
Taken from https://patchwork.kernel.org/patch/10546809/
|
||||
---
|
||||
arch/arm/include/asm/uaccess.h | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
|
||||
index b04850fd..abfafbbf 100644
|
||||
--- a/arch/arm/include/asm/uaccess.h
|
||||
+++ b/arch/arm/include/asm/uaccess.h
|
||||
@@ -159,7 +159,7 @@ extern int __put_user_8(void *, unsigned long long);
|
||||
({ \
|
||||
unsigned long __limit = current_thread_info()->addr_limit - 1; \
|
||||
const typeof(*(p)) __user *__tmp_p = (p); \
|
||||
- register const typeof(*(p)) __r2 asm("r2") = (x); \
|
||||
+ register typeof(*(p)) __r2 asm("r2") = (x); \
|
||||
register const typeof(*(p)) __user *__p asm("r0") = __tmp_p; \
|
||||
register unsigned long __l asm("r1") = __limit; \
|
||||
register int __e asm("r0"); \
|
||||
--
|
||||
2.20.1
|
||||
|
||||
@ -1,25 +0,0 @@
|
||||
From 302604ee4a2011871cb26deaf69d567cf57d0fe3 Mon Sep 17 00:00:00 2001
|
||||
From: Andrey Lebedev <andrey@lebedev.lt>
|
||||
Date: Mon, 20 Jan 2020 23:20:07 +0200
|
||||
Subject: [PATCH 1/2] Silence annoying warning
|
||||
|
||||
---
|
||||
include/linux/log2.h | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
diff --git a/include/linux/log2.h b/include/linux/log2.h
|
||||
index fd7ff3d9..14458fdd 100644
|
||||
--- a/include/linux/log2.h
|
||||
+++ b/include/linux/log2.h
|
||||
@@ -18,7 +18,7 @@
|
||||
/*
|
||||
* deal with unrepresentable constant logarithms
|
||||
*/
|
||||
-extern __attribute__((const, noreturn))
|
||||
+extern __attribute__((const))
|
||||
int ____ilog2_NaN(void);
|
||||
|
||||
/*
|
||||
--
|
||||
2.20.1
|
||||
|
||||
@ -14,12 +14,9 @@ MACHINE_KERNEL_PR_append = "a"
|
||||
SRC_URI += "git://github.com/linux-sunxi/linux-sunxi.git;branch=sunxi-3.4;protocol=git \
|
||||
file://0001-compiler-gcc-integrate-the-various-compiler-gcc-345-.patch \
|
||||
file://0002-use-static-inline-in-ARM-ftrace.patch \
|
||||
file://0003-gcc5-fixes.patch \
|
||||
file://0004-arm-put-user-asm-fix.patch \
|
||||
file://0005-silence-warning.patch \
|
||||
file://0001-gcc5-fixes.patch \
|
||||
file://defconfig \
|
||||
"
|
||||
LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
|
||||
|
||||
S = "${WORKDIR}/git"
|
||||
|
||||
|
||||
@ -1,6 +1,7 @@
|
||||
DESCRIPTION = "Linux Kernel"
|
||||
SECTION = "kernel"
|
||||
LICENSE = "GPLv2"
|
||||
LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
|
||||
|
||||
INC_PR = "r0"
|
||||
|
||||
@ -15,7 +16,7 @@ CMDLINE_DEBUG ?= "loglevel=3"
|
||||
|
||||
# Kernel bootlogo is distro-specific (default is OE logo).
|
||||
# Logo resolution (qvga, vga, ...) is machine-specific.
|
||||
LOGO_SIZE ?= '${@oe.utils.conditional("MACHINE_GUI_CLASS", "bigscreen", "vga", "qvga", d)}'
|
||||
LOGO_SIZE ?= '${@base_conditional("MACHINE_GUI_CLASS", "bigscreen", "vga", "qvga", d)}'
|
||||
# To use this, add file://${LOGO_SIZE}/logo_linux_clut224.ppm.bz2 or similar
|
||||
# to your kernel recipe, and then structure your logos for each resolution
|
||||
# accordingly.
|
||||
@ -35,10 +36,6 @@ kernel_conf_variable() {
|
||||
fi
|
||||
}
|
||||
|
||||
do_kernel_configme[depends] += "virtual/${TARGET_PREFIX}binutils:do_populate_sysroot"
|
||||
do_kernel_configme[depends] += "virtual/${TARGET_PREFIX}gcc:do_populate_sysroot"
|
||||
do_kernel_configme[depends] += "bc-native:do_populate_sysroot bison-native:do_populate_sysroot"
|
||||
|
||||
do_configure_prepend() {
|
||||
CONF_SED_SCRIPT=""
|
||||
|
||||
|
||||
@ -1,25 +0,0 @@
|
||||
DESCRIPTION = "Xradio xr819 WiFi firmware"
|
||||
LICENSE = "CC0-1.0"
|
||||
LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/${LICENSE};md5=0ceb3372c9595f0a8067e55da801e4a1"
|
||||
|
||||
PV = "1.0"
|
||||
PR = "r0"
|
||||
|
||||
SRCREV = "bddd21b7f895be9f0c37e435f0a7ac84405c6091"
|
||||
|
||||
COMPATIBLE_MACHINE = "orange-pi-zero"
|
||||
|
||||
SRC_URI = "git://github.com/armbian/firmware.git;protocol=https"
|
||||
|
||||
S = "${WORKDIR}/git"
|
||||
|
||||
do_install() {
|
||||
install -d ${D}${base_libdir}/firmware/xr819
|
||||
install -m 0644 ${S}/xr819/boot_xr819.bin ${D}${base_libdir}/firmware/xr819/
|
||||
install -m 0644 ${S}/xr819/sdd_xr819.bin ${D}${base_libdir}/firmware/xr819/
|
||||
install -m 0644 ${S}/xr819/fw_xr819.bin ${D}${base_libdir}/firmware/xr819/
|
||||
}
|
||||
|
||||
FILES_${PN} = "${base_libdir}/*"
|
||||
|
||||
PACKAGES = "${PN}"
|
||||
@ -1,23 +0,0 @@
|
||||
SUMMARY = "Xradio WiFi driver for orangepi-zero"
|
||||
LICENSE = "GPLv2"
|
||||
LIC_FILES_CHKSUM = "file://LICENSE;md5=a23a74b3f4caf9616230789d94217acb"
|
||||
|
||||
inherit module
|
||||
|
||||
PV = "0.1"
|
||||
PR = "r0"
|
||||
|
||||
RDEPENDS_${PN} += "xradio-firmware"
|
||||
|
||||
COMPATIBLE_MACHINE = "orange-pi-zero"
|
||||
|
||||
SRCREV = "d649e5a78efdc56ecd0951e35ca60db175650232"
|
||||
|
||||
SRC_URI = "git://github.com/fifteenhex/xradio.git;protocol=https \
|
||||
"
|
||||
|
||||
S = "${WORKDIR}/git"
|
||||
|
||||
EXTRA_OEMAKE += "-C ${STAGING_KERNEL_DIR} M=${S}"
|
||||
|
||||
KERNEL_MODULE_AUTOLOAD += "xradio_wlan"
|
||||
@ -10,8 +10,6 @@ DEPENDS += "libusb"
|
||||
SRC_URI = "git://github.com/linux-sunxi/sunxi-tools;protocol=git"
|
||||
SRCREV = "9a3d62aa0c820b3dd42ba3409b2043f4143683cd"
|
||||
|
||||
inherit pkgconfig
|
||||
|
||||
S = "${WORKDIR}/git"
|
||||
|
||||
BBCLASSEXTEND = "native nativesdk"
|
||||
|
||||
Reference in New Issue
Block a user