mirror of
https://github.com/linux-sunxi/meta-sunxi.git
synced 2025-07-16 22:09:47 +02:00
Compare commits
2 Commits
| Author | SHA1 | Date | |
|---|---|---|---|
| e5e624f30a | |||
| 196a7a6863 |
@ -31,7 +31,7 @@ If you want to switch back to sunxi versions for some reasons (no device tree av
|
||||
|
||||
If you already have built the mainline versions it might be necessary to reset the build directories with:
|
||||
|
||||
bitbake -c clean virtual/kernel virtual/bootloader
|
||||
bitbake -c clean linux u-boot
|
||||
|
||||
Performance
|
||||
===========
|
||||
|
||||
@ -7,4 +7,3 @@ BBFILES += "${LAYERDIR}/recipes*/*/*.bb ${LAYERDIR}/recipes*/*/*.bbappend"
|
||||
BBFILE_COLLECTIONS += "meta-sunxi"
|
||||
BBFILE_PATTERN_meta-sunxi := "^${LAYERDIR}/"
|
||||
BBFILE_PRIORITY_meta-sunxi = "10"
|
||||
LAYERSERIES_COMPAT_meta-sunxi = "morty pyro rocko sumo thud"
|
||||
|
||||
@ -5,7 +5,7 @@
|
||||
|
||||
require conf/machine/include/sun8i.inc
|
||||
|
||||
PREFERRED_VERSION_u-boot = "v2018.03%"
|
||||
PREFERRED_VERSION_u-boot = "v2017.11%"
|
||||
|
||||
KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo-air.dtb"
|
||||
UBOOT_MACHINE = "nanopi_neo_air_defconfig"
|
||||
|
||||
@ -1,11 +0,0 @@
|
||||
#@TYPE: Machine
|
||||
#@NAME: nanopi-neo-plus2
|
||||
#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo Plus2, based
|
||||
# on the Allwinner H5 SoC.
|
||||
|
||||
require conf/machine/include/sun50i.inc
|
||||
|
||||
PREFERRED_VERSION_u-boot = "v2018.03%"
|
||||
|
||||
KERNEL_DEVICETREE = "allwinner/sun50i-h5-nanopi-neo-plus2.dtb"
|
||||
UBOOT_MACHINE = "nanopi_neo_plus2_defconfig"
|
||||
@ -4,7 +4,7 @@
|
||||
|
||||
require conf/machine/include/sun8i.inc
|
||||
|
||||
PREFERRED_VERSION_u-boot = "v2018.03%"
|
||||
PREFERRED_VERSION_u-boot = "v2017.11%"
|
||||
|
||||
KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo.dtb"
|
||||
UBOOT_MACHINE = "nanopi_neo_defconfig"
|
||||
|
||||
@ -1,11 +0,0 @@
|
||||
#@TYPE: Machine
|
||||
#@NAME: nanopi-neo2
|
||||
#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo 2, based on
|
||||
# the Allwinner H5 SoC.
|
||||
|
||||
require conf/machine/include/sun50i.inc
|
||||
|
||||
PREFERRED_VERSION_u-boot = "v2018.03%"
|
||||
|
||||
KERNEL_DEVICETREE = "allwinner/sun50i-h5-nanopi-neo2.dtb"
|
||||
UBOOT_MACHINE = "nanopi_neo2_defconfig"
|
||||
@ -4,7 +4,7 @@
|
||||
|
||||
require conf/machine/include/sun8i.inc
|
||||
|
||||
PREFERRED_VERSION_u-boot = "v2018.03%"
|
||||
PREFERRED_VERSION_u-boot = "v2017.11%"
|
||||
|
||||
KERNEL_DEVICETREE = "sun8i-h3-orangepi-one.dtb"
|
||||
UBOOT_MACHINE = "orangepi_one_defconfig"
|
||||
|
||||
@ -4,7 +4,7 @@
|
||||
|
||||
require conf/machine/include/sun8i.inc
|
||||
|
||||
PREFERRED_VERSION_u-boot = "v2018.03%"
|
||||
PREFERRED_VERSION_u-boot = "v2017.03%"
|
||||
|
||||
KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc-plus.dtb"
|
||||
UBOOT_MACHINE = "orangepi_pc_plus_defconfig"
|
||||
|
||||
@ -4,7 +4,7 @@
|
||||
|
||||
require conf/machine/include/sun8i.inc
|
||||
|
||||
PREFERRED_VERSION_u-boot = "v2018.03%"
|
||||
PREFERRED_VERSION_u-boot = "v2017.11%"
|
||||
|
||||
KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc.dtb"
|
||||
UBOOT_MACHINE = "orangepi_pc_defconfig"
|
||||
|
||||
@ -5,7 +5,7 @@
|
||||
|
||||
require conf/machine/include/sun50i.inc
|
||||
|
||||
PREFERRED_VERSION_u-boot = "v2018.03%"
|
||||
PREFERRED_VERSION_u-boot = "v2017.11%"
|
||||
|
||||
KERNEL_DEVICETREE = "allwinner/sun50i-h5-orangepi-zero-plus2.dtb"
|
||||
UBOOT_MACHINE = "orangepi_zero_plus2_defconfig"
|
||||
|
||||
@ -4,7 +4,7 @@
|
||||
|
||||
require conf/machine/include/sun8i.inc
|
||||
|
||||
PREFERRED_VERSION_u-boot = "v2018.03%"
|
||||
PREFERRED_VERSION_u-boot = "v2017.11%"
|
||||
|
||||
KERNEL_DEVICETREE = "sun8i-h2-plus-orangepi-zero.dtb"
|
||||
UBOOT_MACHINE = "orangepi_zero_defconfig"
|
||||
|
||||
@ -4,7 +4,7 @@
|
||||
|
||||
require conf/machine/include/sun4i.inc
|
||||
|
||||
PREFERRED_VERSION_u-boot = "v2018.03%"
|
||||
PREFERRED_VERSION_u-boot = "v2017.11%"
|
||||
|
||||
KERNEL_DEVICETREE = "sun4i-a10-pcduino.dtb"
|
||||
UBOOT_MACHINE = "Linksprite_pcDuino_defconfig"
|
||||
|
||||
9
conf/machine/pcduino3.conf
Normal file
9
conf/machine/pcduino3.conf
Normal file
@ -0,0 +1,9 @@
|
||||
#@TYPE: Machine
|
||||
#@NAME: Linksprite A20-pcduino3 Board
|
||||
#@DESCRIPTION: Machine configuration for the pcDuino 3, based on Allwinner A20 CPU
|
||||
|
||||
require conf/machine/include/sun7i.inc
|
||||
|
||||
KERNEL_DEVICETREE = "sun7i-a20-pcduino3.dtb"
|
||||
UBOOT_MACHINE = "Linksprite_pcDuino3_defconfig"
|
||||
SUNXI_FEX_FILE = "sys_config/a20/linksprite_pcduino3.fex"
|
||||
@ -1,26 +0,0 @@
|
||||
From f4a77da23b3890b53efab6a927cbe99b76ef3b26 Mon Sep 17 00:00:00 2001
|
||||
From: Florin Sarbu <florin@resin.io>
|
||||
Date: Wed, 12 Sep 2018 14:22:49 +0200
|
||||
Subject: [PATCH] nanopi_neo_air_defconfig: Enable eMMC support
|
||||
|
||||
Upstream-status: Pending
|
||||
Signed-off-by: Florin Sarbu <florin@resin.io>
|
||||
---
|
||||
configs/nanopi_neo_air_defconfig | 1 +
|
||||
1 file changed, 1 insertion(+)
|
||||
|
||||
diff --git a/configs/nanopi_neo_air_defconfig b/configs/nanopi_neo_air_defconfig
|
||||
index ca9c2dd..74ce044 100644
|
||||
--- a/configs/nanopi_neo_air_defconfig
|
||||
+++ b/configs/nanopi_neo_air_defconfig
|
||||
@@ -10,6 +10,7 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-neo-air"
|
||||
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
||||
CONFIG_CONSOLE_MUX=y
|
||||
CONFIG_SPL=y
|
||||
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
|
||||
# CONFIG_CMD_FLASH is not set
|
||||
# CONFIG_SPL_DOS_PARTITION is not set
|
||||
# CONFIG_SPL_ISO_PARTITION is not set
|
||||
--
|
||||
2.7.4
|
||||
|
||||
@ -1,16 +1,12 @@
|
||||
diff --git a/scripts/dtc/pylibfdt/Makefile b/scripts/dtc/pylibfdt/Makefile
|
||||
index 01d5e0ffe3..2b2dfe0bd9 100644
|
||||
--- a/scripts/dtc/pylibfdt/Makefile
|
||||
+++ b/scripts/dtc/pylibfdt/Makefile
|
||||
@@ -15,6 +15,8 @@ PYLIBFDT_srcs = $(addprefix $(LIBFDT_srcdir)/,$(LIBFDT_SRCS)) \
|
||||
|
||||
quiet_cmd_pymod = PYMOD $@
|
||||
cmd_pymod = unset CC; unset CROSS_COMPILE; unset CFLAGS;\
|
||||
+ CC="$(HOSTCC)" \
|
||||
+ LDSHARED="$(HOSTLDSHARED)" \
|
||||
LDFLAGS="$(HOSTLDFLAGS)" \
|
||||
VERSION="u-boot-$(UBOOTVERSION)" \
|
||||
CPPFLAGS="$(HOSTCFLAGS) -I$(LIBFDT_srcdir)" OBJDIR=$(obj) \
|
||||
--
|
||||
2.11.0
|
||||
|
||||
diff --git a/tools/Makefile b/tools/Makefile
|
||||
index 5db2a54..54bd224 100644
|
||||
--- a/tools/Makefile
|
||||
+++ b/tools/Makefile
|
||||
@@ -134,6 +134,7 @@ tools/_libfdt.so: $(LIBFDT_SRCS) $(LIBFDT_SWIG)
|
||||
$(Q)unset CC; \
|
||||
unset CROSS_COMPILE; \
|
||||
LDFLAGS="$(HOSTLDFLAGS)" CFLAGS= VERSION="u-boot-$(UBOOTVERSION)" \
|
||||
+ CC="$(HOSTCC)" LDSHARED="$(HOSTLDSHARED)" \
|
||||
CPPFLAGS="$(_hostc_flags)" OBJDIR=tools \
|
||||
SOURCES="$(LIBFDT_SRCS) tools/libfdt.i" \
|
||||
SWIG_OPTS="-I$(srctree)/lib/libfdt -I$(srctree)/lib" \
|
||||
|
||||
@ -18,13 +18,12 @@ DEFAULT_PREFERENCE_sun50i="1"
|
||||
|
||||
SRC_URI = "git://git.denx.de/u-boot.git;branch=master \
|
||||
file://u-boot-pylibfdt-native-build.patch \
|
||||
file://0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch \
|
||||
file://boot.cmd \
|
||||
"
|
||||
|
||||
SRCREV = "f95ab1fb6e37f0601f397091bb011edf7a98b890"
|
||||
SRCREV = "c253573f3e269fd9a24ee6684d87dd91106018a5"
|
||||
|
||||
PV = "v2018.03+git${SRCPV}"
|
||||
PV = "v2017.11+git${SRCPV}"
|
||||
PE = "2"
|
||||
|
||||
S = "${WORKDIR}/git"
|
||||
@ -0,0 +1,29 @@
|
||||
From 1596e282f52c8f43fd1cc4a39096f28563558a5c Mon Sep 17 00:00:00 2001
|
||||
From: Sergey Matyukevich <geomatsi@gmail.com>
|
||||
Date: Fri, 3 Nov 2017 22:12:43 +0300
|
||||
Subject: [PATCH 1/2] arm64: dts: orange-pi-zero-plus2: fix sdcard detect
|
||||
|
||||
The sdcard detect pin on orange-pi-zero-plus2 is pulled up.
|
||||
Fix cd-gpio description to enable sdcard detect.
|
||||
|
||||
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
|
||||
---
|
||||
arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
|
||||
index b6b7a561df8c..a42fd79a62a3 100644
|
||||
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
|
||||
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
|
||||
@@ -71,7 +71,7 @@
|
||||
pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
|
||||
vmmc-supply = <®_vcc3v3>;
|
||||
bus-width = <4>;
|
||||
- cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
|
||||
+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
--
|
||||
2.11.0
|
||||
|
||||
@ -0,0 +1,74 @@
|
||||
From 4d470855525b5993e766ad9f9304482739ba918d Mon Sep 17 00:00:00 2001
|
||||
From: Sergey Matyukevich <geomatsi@gmail.com>
|
||||
Date: Fri, 3 Nov 2017 22:24:45 +0300
|
||||
Subject: [PATCH 2/2] arm64: dts: orange-pi-zero-plus2: enable AP6212a WiFi/BT
|
||||
combo
|
||||
|
||||
Enable AP6212a WiFi/BT combo chip on orange-pi-zero-plus2 board:
|
||||
- WiFi SDIO interface is connected to MMC1
|
||||
- WiFi REG_ON pin connected to gpio PA9: attach to mmc-pwrseq
|
||||
- WiFi HOST_WAKE pin connected to gpio PL7
|
||||
- BT is connected to UART1
|
||||
|
||||
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
|
||||
---
|
||||
.../allwinner/sun50i-h5-orangepi-zero-plus2.dts | 32 ++++++++++++++++++++++
|
||||
1 file changed, 32 insertions(+)
|
||||
|
||||
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
|
||||
index a42fd79a62a3..d415b7b67cce 100644
|
||||
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
|
||||
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
|
||||
@@ -64,6 +64,13 @@
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
+
|
||||
+ wifi_pwrseq: wifi_pwrseq {
|
||||
+ compatible = "mmc-pwrseq-simple";
|
||||
+ pinctrl-names = "default";
|
||||
+ reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
|
||||
+ post-power-on-delay-ms = <200>;
|
||||
+ };
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
@@ -75,6 +82,25 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
+&mmc1 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&mmc1_pins_a>;
|
||||
+ vmmc-supply = <®_vcc3v3>;
|
||||
+ vqmmc-supply = <®_vcc3v3>;
|
||||
+ mmc-pwrseq = <&wifi_pwrseq>;
|
||||
+ bus-width = <4>;
|
||||
+ non-removable;
|
||||
+ status = "okay";
|
||||
+
|
||||
+ brcmf: wifi@1 {
|
||||
+ reg = <1>;
|
||||
+ compatible = "brcm,bcm4329-fmac";
|
||||
+ interrupt-parent = <&r_pio>;
|
||||
+ interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
|
||||
+ interrupt-names = "host-wake";
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
&mmc2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc2_8bit_pins>;
|
||||
@@ -90,3 +116,9 @@
|
||||
pinctrl-0 = <&uart0_pins_a>;
|
||||
status = "okay";
|
||||
};
|
||||
+
|
||||
+&uart1 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
|
||||
+ status = "okay";
|
||||
+};
|
||||
--
|
||||
2.11.0
|
||||
|
||||
@ -9,22 +9,18 @@ This patch was originally submitted by Jelle van der Waa. Martin Kelly
|
||||
modified it to compile on the latest kernel, fixed up some review
|
||||
comments from Maxime Ripard, and re-tested the patch.
|
||||
|
||||
The patch has been reworked to add back eMMC support which has been left
|
||||
out at the last backport.
|
||||
|
||||
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
|
||||
Cc: linux-sunxi@googlegroups.com
|
||||
Cc: devicetree@vger.kernel.org
|
||||
Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
|
||||
Signed-off-by: Martin Kelly <mkelly@xevo.com>
|
||||
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
|
||||
Signed-off-by: Florin Sarbu <florin@resin.io>
|
||||
---
|
||||
arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts | 34 +++++++++++++++++++++++++++
|
||||
1 file changed, 34 insertions(+)
|
||||
arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts | 24 ++++++++++++++++++++++++
|
||||
1 file changed, 24 insertions(+)
|
||||
|
||||
diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
|
||||
index 03ff6f8..a9331fe 100644
|
||||
index 03ff6f8b93ff..920849092cc8 100644
|
||||
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
|
||||
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
|
||||
@@ -72,6 +72,11 @@
|
||||
@ -39,7 +35,7 @@ index 03ff6f8..a9331fe 100644
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
@@ -84,6 +89,35 @@
|
||||
@@ -84,6 +89,25 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -61,16 +57,6 @@ index 03ff6f8..a9331fe 100644
|
||||
+ interrupt-names = "host-wake";
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&mmc2 {
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&mmc2_8bit_pins>;
|
||||
+ vmmc-supply = <®_vcc3v3>;
|
||||
+ vqmmc-supply = <®_vcc3v3>;
|
||||
+ bus-width = <8>;
|
||||
+ non-removable;
|
||||
+ status = "okay";
|
||||
+};
|
||||
+
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
|
||||
@ -431,11 +431,6 @@ CONFIG_USB_QCOM_8X16_PHY=y
|
||||
CONFIG_USB_ULPI=y
|
||||
CONFIG_USB_GADGET=y
|
||||
CONFIG_USB_RENESAS_USBHS_UDC=m
|
||||
CONFIG_USB_MUSB_HDRC=y
|
||||
# Restrict to host mode, as it is hard-coded that way in the device tree
|
||||
# (dr_mode = "host" in the &usb_otg node)
|
||||
CONFIG_USB_MUSB_HOST=y
|
||||
CONFIG_USB_MUSB_SUNXI=y
|
||||
CONFIG_MMC=y
|
||||
CONFIG_MMC_BLOCK_MINORS=32
|
||||
CONFIG_MMC_ARMMMCI=y
|
||||
|
||||
@ -1,79 +0,0 @@
|
||||
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
|
||||
index 6713d0f2b3f4..ad0829e8f716 100644
|
||||
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
|
||||
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
|
||||
@@ -80,19 +80,22 @@
|
||||
};
|
||||
};
|
||||
|
||||
- reg_vcc_wifi: reg_vcc_wifi {
|
||||
+ vdd_wifi: vdd_wifi {
|
||||
compatible = "regulator-fixed";
|
||||
- regulator-min-microvolt = <3300000>;
|
||||
- regulator-max-microvolt = <3300000>;
|
||||
- regulator-name = "vcc-wifi";
|
||||
- enable-active-high;
|
||||
+ regulator-name = "wifi";
|
||||
+ regulator-min-microvolt = <1800000>;
|
||||
+ regulator-max-microvolt = <1800000>;
|
||||
gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
|
||||
+ startup-delay-us = <70000>;
|
||||
+ enable-active-high;
|
||||
};
|
||||
|
||||
- wifi_pwrseq: wifi_pwrseq {
|
||||
+ pwrseq_wifi: pwrseq_wifi@0 {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&wifi_rst>;
|
||||
reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
|
||||
- post-power-on-delay-ms = <200>;
|
||||
+ post-power-on-delay-ms = <50>;
|
||||
};
|
||||
};
|
||||
|
||||
@@ -124,9 +127,11 @@
|
||||
&mmc1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc1_pins_a>;
|
||||
- vmmc-supply = <®_vcc_wifi>;
|
||||
- mmc-pwrseq = <&wifi_pwrseq>;
|
||||
+ vmmc-supply = <®_vcc3v3>;
|
||||
+ vqmmc-supply = <&vdd_wifi>;
|
||||
+ mmc-pwrseq = <&pwrseq_wifi>;
|
||||
bus-width = <4>;
|
||||
+ max-frequency = <16000000>;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
|
||||
@@ -136,9 +141,30 @@
|
||||
*/
|
||||
xr819: sdio_wifi@1 {
|
||||
reg = <1>;
|
||||
+ compatible = "xradio,xr819";
|
||||
+ pinctrl-names = "default";
|
||||
+ pinctrl-0 = <&wifi_wake>;
|
||||
+ interrupt-parent = <&pio>;
|
||||
+ interrupts = <6 10 IRQ_TYPE_EDGE_RISING>;
|
||||
+ interrupt-names = "host-wake";
|
||||
+ local-mac-address = [dc 44 6d c0 ff ee];
|
||||
};
|
||||
};
|
||||
|
||||
+&pio {
|
||||
+ wifi_wake: wifi_wake {
|
||||
+ pins = "PG10";
|
||||
+ function = "gpio_in";
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
+&r_pio {
|
||||
+ wifi_rst: wifi_rst {
|
||||
+ pins = "PL7";
|
||||
+ function = "gpio_out";
|
||||
+ };
|
||||
+};
|
||||
+
|
||||
&mmc1_pins_a {
|
||||
bias-pull-up;
|
||||
};
|
||||
@ -19,14 +19,12 @@ KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
|
||||
|
||||
S = "${WORKDIR}/linux-${PV}"
|
||||
|
||||
SRC_URI[md5sum] = "86f56f586f35ac3a98e086dccfd2ff99"
|
||||
SRC_URI[sha256sum] = "6f0a7b3abd48eca3df5e29bfbcfc1c06dd2792f86d23cdb9ad37cf3e572df2e3"
|
||||
SRC_URI[md5sum] = "e1051f6b15d6399a5de2441dd4e15537"
|
||||
SRC_URI[sha256sum] = "ffc393a0c66f80375eacd3fb177b92e5c9daa07de0dcf947e925e049352e6142"
|
||||
|
||||
SRC_URI = "https://www.kernel.org/pub/linux/kernel/v4.x/linux-${PV}.tar.xz \
|
||||
file://0001-arm64-dts-orange-pi-zero-plus2-fix-sdcard-detect.patch \
|
||||
file://0002-arm64-dts-orange-pi-zero-plus2-enable-AP6212a-WiFi-B.patch \
|
||||
file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
|
||||
file://defconfig \
|
||||
"
|
||||
|
||||
SRC_URI_append_orange-pi-zero += "\
|
||||
file://0001-add-wifi-support.patch \
|
||||
"
|
||||
@ -1,15 +1,13 @@
|
||||
SECTION = "kernel"
|
||||
DESCRIPTION = "Mainline Linux kernel"
|
||||
LICENSE = "GPLv2"
|
||||
LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
|
||||
COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
|
||||
LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
|
||||
COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i)"
|
||||
|
||||
inherit kernel
|
||||
|
||||
require linux.inc
|
||||
|
||||
# Since we're not using git, this doesn't make a difference, but we need to fill
|
||||
# in something or kernel-yocto.bbclass will fail.
|
||||
KBRANCH ?= "master"
|
||||
|
||||
# Pull in the devicetree files into the rootfs
|
||||
@ -17,13 +15,13 @@ RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"
|
||||
|
||||
# Default is to use stable kernel version
|
||||
# If you want to use latest git version set to "1"
|
||||
DEFAULT_PREFERENCE = "-1"
|
||||
DEFAULT_PREFERENCE = "-1"
|
||||
|
||||
KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
|
||||
|
||||
# v4.17-rc7
|
||||
PV = "v4.17-rc7+git${SRCPV}"
|
||||
SRCREV_pn-${PN} = "b04e217704b7f879c6b91222b066983a44a7a09f"
|
||||
# 4.15-rc1
|
||||
PV = "4.15+git${SRCPV}"
|
||||
SRCREV_pn-${PN} = "4fbd8d194f06c8a3fd2af1ce560ddb31f7ec8323"
|
||||
|
||||
SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git;protocol=git;branch=master \
|
||||
file://defconfig \
|
||||
|
||||
@ -1,6 +1,7 @@
|
||||
DESCRIPTION = "Linux Kernel"
|
||||
SECTION = "kernel"
|
||||
LICENSE = "GPLv2"
|
||||
LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
|
||||
|
||||
INC_PR = "r0"
|
||||
|
||||
@ -15,7 +16,7 @@ CMDLINE_DEBUG ?= "loglevel=3"
|
||||
|
||||
# Kernel bootlogo is distro-specific (default is OE logo).
|
||||
# Logo resolution (qvga, vga, ...) is machine-specific.
|
||||
LOGO_SIZE ?= '${@oe.utils.conditional("MACHINE_GUI_CLASS", "bigscreen", "vga", "qvga", d)}'
|
||||
LOGO_SIZE ?= '${@base_conditional("MACHINE_GUI_CLASS", "bigscreen", "vga", "qvga", d)}'
|
||||
# To use this, add file://${LOGO_SIZE}/logo_linux_clut224.ppm.bz2 or similar
|
||||
# to your kernel recipe, and then structure your logos for each resolution
|
||||
# accordingly.
|
||||
@ -35,10 +36,6 @@ kernel_conf_variable() {
|
||||
fi
|
||||
}
|
||||
|
||||
do_kernel_configme[depends] += "virtual/${TARGET_PREFIX}binutils:do_populate_sysroot"
|
||||
do_kernel_configme[depends] += "virtual/${TARGET_PREFIX}gcc:do_populate_sysroot"
|
||||
do_kernel_configme[depends] += "bc-native:do_populate_sysroot bison-native:do_populate_sysroot"
|
||||
|
||||
do_configure_prepend() {
|
||||
CONF_SED_SCRIPT=""
|
||||
|
||||
|
||||
@ -1,25 +0,0 @@
|
||||
DESCRIPTION = "Xradio xr819 WiFi firmware"
|
||||
LICENSE = "CC0-1.0"
|
||||
LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/${LICENSE};md5=0ceb3372c9595f0a8067e55da801e4a1"
|
||||
|
||||
PV = "1.0"
|
||||
PR = "r0"
|
||||
|
||||
SRCREV = "8b4a4ed16f7f9d12e59ff2f9ceba3cc335374dbe"
|
||||
|
||||
COMPATIBLE_MACHINE = "orange-pi-zero"
|
||||
|
||||
SRC_URI = "git://github.com/armbian/build.git;protocol=https"
|
||||
|
||||
S = "${WORKDIR}/git"
|
||||
|
||||
do_install() {
|
||||
install -d ${D}${base_libdir}/firmware/xr819
|
||||
install -m 0644 ${S}/bin/firmware-overlay/xr819/boot_xr819.bin ${D}${base_libdir}/firmware/xr819/
|
||||
install -m 0644 ${S}/bin/firmware-overlay/xr819/sdd_xr819.bin ${D}${base_libdir}/firmware/xr819/
|
||||
install -m 0644 ${S}/bin/firmware-overlay/xr819/fw_xr819.bin ${D}${base_libdir}/firmware/xr819/
|
||||
}
|
||||
|
||||
FILES_${PN} = "${base_libdir}/*"
|
||||
|
||||
PACKAGES = "${PN}"
|
||||
@ -1,23 +0,0 @@
|
||||
SUMMARY = "Xradio WiFi driver for orangepi-zero"
|
||||
LICENSE = "GPLv2"
|
||||
LIC_FILES_CHKSUM = "file://LICENSE;md5=a23a74b3f4caf9616230789d94217acb"
|
||||
|
||||
inherit module
|
||||
|
||||
PV = "0.1"
|
||||
PR = "r0"
|
||||
|
||||
RDEPENDS_${PN} += "xradio-firmware"
|
||||
|
||||
COMPATIBLE_MACHINE = "orange-pi-zero"
|
||||
|
||||
SRCREV = "d649e5a78efdc56ecd0951e35ca60db175650232"
|
||||
|
||||
SRC_URI = "git://github.com/fifteenhex/xradio.git;protocol=https \
|
||||
"
|
||||
|
||||
S = "${WORKDIR}/git"
|
||||
|
||||
EXTRA_OEMAKE += "-C ${STAGING_KERNEL_DIR} M=${S}"
|
||||
|
||||
KERNEL_MODULE_AUTOLOAD += "xradio_wlan"
|
||||
Reference in New Issue
Block a user