Added support for bananapi-m64 machine

Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>

README.md

@@ -19,24 +19,36 @@ Maintainers:
 Kernel / U-Boot Version
 ===========
 Most Allwinner devices and hardware are supported in mainline kernel and U-Boot, so this layer builds mainline by default.
+
+Legacy sunxi Kernel / U-Boot
+-----------
+
 There is a custom U-Boot and Kernel version for sunxi devices which includes some special drivers not mainlined.
-These versions are rather old (3.4 for kernel and 2014.04 for U-Boot), but may support more functions and devices than current mainline
+These versions are rather old (3.4 for kernel and 2014.04 for U-Boot), but may support more functions and devices than current mainline.
 
 If you want to switch back to sunxi versions for some reasons (no device tree available, unsupported hardware), either:
 - change the file conf/machine/include/sunxi.inc to include the following block
 - edit your conf/local.conf to add the following block
 
-	PREFERRED_PROVIDER_u-boot="u-boot-sunxi"
-	PREFERRED_PROVIDER_virtual/bootloader="u-boot-sunxi"
-	PREFERRED_PROVIDER_virtual/kernel="linux-sunxi"
+		PREFERRED_PROVIDER_u-boot="u-boot-sunxi"
+		PREFERRED_PROVIDER_virtual/bootloader="u-boot-sunxi"
+		PREFERRED_PROVIDER_virtual/kernel="linux-sunxi"
+		KERNEL_DEVICETREE = ""
 
 If you already have built the mainline versions it might be necessary to reset the build directories with:
 
 	bitbake -c clean virtual/kernel virtual/bootloader
 
-For mainline kernel we have now support for latest LTS, stable and bleeding edge (latest possible rc).
+Mainline Kernel / U-Boot
+-----------
+
+For mainline kernel we have now support for latest LTS and stable.
 By default we use latest LTS. If you would like to change version please update ```PREFERRED_VERSION_linux-mainline``` in:
-* [conf/machine/include/sunxi.inc](https://github.com/linux-sunxi/meta-sunxi/blob/4921234ed77f9df77c65c88637ce50468f65bde7/conf/machine/include/sunxi.inc#L16)
+* [conf/machine/include/sunxi.inc](https://github.com/linux-sunxi/meta-sunxi/blob/fa0846c0eb23e3424b89acb4d5a327e921f73497/conf/machine/include/sunxi.inc#L16)
+
+When using mainline kernel ≥ 5.2 it is now possible to use the mainline graphics drivers *lima* and *panfrost*, instead of the *mali* driver provided by ARM. To enable open source mainline graphics support add the following line in your `local.conf`:
+
+    MACHINEOVERRIDES .= ":use-mailine-graphics"
 
 Performance
 ===========

classes/sdcard_image-sunxi.bbclass

@@ -17,7 +17,7 @@ inherit image_types
 IMAGE_TYPEDEP_sunxi-sdimg = "${SDIMG_ROOTFS_TYPE}"
 
 # Boot partition volume id
-BOOTDD_VOLUME_ID ?= "${MACHINE}"
+BOOTDD_VOLUME_ID ?= "boot"
 
 # Boot partition size [in KiB]
 BOOT_SPACE ?= "40960"
@@ -94,6 +94,10 @@ IMAGE_CMD_sunxi-sdimg () {
 	then
 		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/boot.scr ::boot.scr
 	fi
+        if [ -e "${DEPLOY_DIR_IMAGE}/splash.bmp" ]
+        then
+                mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/splash.bmp ::splash.bmp
+        fi
 
 
 	# Add stamp file

conf/layer.conf

@@ -14,4 +14,4 @@ LAYERVERSION_meta-sunxi = "1"
 
 LAYERDEPENDS_meta-sunxi = "core openembedded-layer"
 
-LAYERSERIES_COMPAT_meta-sunxi = "morty pyro rocko sumo thud warrior"
+LAYERSERIES_COMPAT_meta-sunxi = "zeus dunfell gatesgarth hardknott"

conf/machine/bananapi-m2m.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: bananapi-m2m
+#@DESCRIPTION: Machine configuration for the Banana Pi M2M, base on Allwinner H8 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-r16-bananapi-m2m.dtb"
+UBOOT_MACHINE = "Bananapi_m2m_defconfig"
+

conf/machine/bananapi-m2plus.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: bananapi-m2plus
+#@DESCRIPTION: Machine configuration for the Banana Pi M2+, base on Allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-bananapi-m2-plus.dtb"
+UBOOT_MACHINE = "bananapi_m2_plus_h3_defconfig"
+

conf/machine/bananapi-m64.conf

@@ -0,0 +1,8 @@
+#@TYPE: Machine
+#@NAME: pine64-plus
+#@DESCRIPTION: Machine configuration for the pine64-plus, based on Allwinner A64 CPU
+
+require conf/machine/include/sun50i.inc
+
+KERNEL_DEVICETREE = "allwinner/sun50i-a64-bananapi-m64.dtb"
+UBOOT_MACHINE = "bananapi_m64_defconfig"

conf/machine/include/hardware/ap6212a.inc

@@ -0,0 +1,5 @@
+# Include for boards with AMPAK 6212A Wifi / Bluetooth module
+# https://linux-sunxi.org/Wifi#Ampak
+
+MACHINE_EXTRA_RRECOMMENDS_append = " kernel-module-brcmfmac"
+MACHINE_EXTRA_RDEPENDS_append = " linux-firmware-bcm43430"

conf/machine/include/sun50i.inc

@@ -1,4 +1,6 @@
 require conf/machine/include/sunxi64.inc
-require conf/machine/include/arm/arch-armv8a.inc
+
+DEFAULTTUNE ?= "cortexa53-crypto"
+require conf/machine/include/tune-cortexa53.inc
 
 SOC_FAMILY = "sun50i"

conf/machine/include/sunxi-mali-driver.inc

@@ -0,0 +1,15 @@
+PREFERRED_PROVIDER_virtual/mesa ?= "mesa-gl"
+PREFERRED_PROVIDER_virtual/libgl ?= "mesa-gl"
+PREFERRED_PROVIDER_virtual/libgles1 ?= "sunxi-mali"
+PREFERRED_PROVIDER_virtual/libgles2 ?= "sunxi-mali"
+PREFERRED_PROVIDER_virtual/egl ?= "sunxi-mali"
+
+PACKAGECONFIG_remove_pn-xserver-xorg = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'glamor', '', d)}"
+
+XSERVER += "sunxi-mali \
+            sunxi-mali-dev"
+
+MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "\
+ kernel-module-mali \
+ kernel-module-mali-drm \
+  "

conf/machine/include/sunxi-mali.inc

@@ -1,13 +1,5 @@
-PREFERRED_PROVIDER_virtual/mesa ?= "mesa-gl"
-PREFERRED_PROVIDER_virtual/libgl ?= "mesa-gl"
-PREFERRED_PROVIDER_virtual/libgles1 ?= "sunxi-mali"
-PREFERRED_PROVIDER_virtual/libgles2 ?= "sunxi-mali"
-PREFERRED_PROVIDER_virtual/egl ?= "sunxi-mali"
-
-XSERVER += "sunxi-mali \
-            sunxi-mali-dev"
-
-MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "\
- kernel-module-mali \
- kernel-module-mali-drm \
-  "
+# The "sunxi-mailine-graphics-drivers.inc" doesn't exist, but it can be created
+# in the future if needed.  Using include directive ensures build doesn't fail
+# if .inc file doesn't exist:
+# https://www.yoctoproject.org/pipermail/yocto/2019-August/046484.html
+include ${@'sunxi-mali-driver.inc' if 'use-mailine-graphics' not in d.getVar("MACHINEOVERRIDES").split(":") else 'sunxi-mailine-graphics-drivers.inc' }

conf/machine/include/sunxi.inc

@@ -1,6 +1,8 @@
 SOC_FAMILY ??= ""
 include conf/machine/include/soc-family.inc
 
+MACHINEOVERRIDES =. "sunxi:"
+
 # Sub-architecture support
 MACHINE_SOCARCH_SUFFIX ?= ""
 MACHINE_SOCARCH_SUFFIX_sun4i = "-sun4i"
@@ -13,14 +15,14 @@ XSERVER = "xserver-xorg \
            xf86-input-keyboard"
 
 PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
-PREFERRED_VERSION_linux-mainline ?= "4.19%"
+PREFERRED_VERSION_linux-mainline ?= "5.4.%"
 PREFERRED_PROVIDER_u-boot ?= "u-boot"
 PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
 
 KERNEL_IMAGETYPE ?= "uImage"
 
 IMAGE_CLASSES += "sdcard_image-sunxi"
-IMAGE_FSTYPES += "ext3 tar.gz sunxi-sdimg"
+IMAGE_FSTYPES += "ext3 tar.gz sunxi-sdimg wic.gz wic.bmap"
 
 MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"
 
@@ -32,3 +34,16 @@ SPL_BINARY ?= "u-boot-sunxi-with-spl.bin"
 
 SERIAL_CONSOLE ?= "115200 ttyS0"
 MACHINE_FEATURES ?= "alsa apm keyboard rtc serial screen usbgadget usbhost vfat"
+
+# Mimic the sdcard_image-sunxi.bbclass
+# image-version-info file was also generated and installed to boot partition,
+# but it is missing here - can be added somehow (how?) if required
+SUNXI_FEX_FILE ?= " "
+SUNXI_BOOT_SPACE ?= "40"
+IMAGE_BOOT_FILES ?= "${KERNEL_IMAGETYPE} boot.scr"
+# ship fex file for sunxi kernel, devicetree file for mainline kernel
+IMAGE_BOOT_FILES += "${@bb.utils.contains('PREFERRED_PROVIDER_virtual/kernel', 'linux-sunxi', '${SUNXI_FEX_FILE}', '${KERNEL_DEVICETREE}', d)}"
+WKS_FILES ?= "sunxi-sdcard-image.wks.in"
+WKS_FILE_DEPENDS ?= "virtual/kernel u-boot"
+# in case of sunxi kernel, sunxi-board-fex must be built prior wic image assembly
+WKS_FILE_DEPENDS += " ${@bb.utils.contains('PREFERRED_PROVIDER_virtual/kernel', 'linux-sunxi', 'sunxi-board-fex', '', d)}"

conf/machine/include/sunxi64.inc

@@ -1,6 +1,8 @@
 SOC_FAMILY ??= ""
 include conf/machine/include/soc-family.inc
 
+MACHINEOVERRIDES =. "sunxi:sunxi64:"
+
 PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
 PREFERRED_PROVIDER_u-boot ?= "u-boot"
 PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"

conf/machine/licheepi-zero.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: licheepi-zero
+#@DESCRIPTION: Machine configuration for the licheepi-zero, based on allwinner V3s CPU
+
+require conf/machine/include/sun8i.inc
+
+
+UBOOT_MACHINE = "LicheePi_Zero_defconfig"
+KERNEL_DEVICETREE = "sun8i-v3s-licheepi-zero.dtb"

conf/machine/marsboard-a10.conf

@@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: HAOYU Electronics MarsBoard A10
+#@DESCRIPTION: Machine configuration for the HAOYU Electronics MarsBoard A10, based on Allwinner A10 CPU
+#https://linux-sunxi.org/MarsBoard_A10
+
+require conf/machine/include/sun4i.inc
+
+KERNEL_DEVICETREE = "sun4i-a10-marsboard.dtb"
+UBOOT_MACHINE = "Marsboard_A10_config"
+SUNXI_FEX_FILE = "sys_config/a10/marsboard_a10.fex"

conf/machine/nanopi-m1-plus.conf

@@ -4,8 +4,6 @@
 
 require conf/machine/include/sun8i.inc
 
-PREFERRED_VERSION_u-boot = "v2018.09%"
-
 KERNEL_DEVICETREE = "sun8i-h3-nanopi-m1-plus.dtb"
 UBOOT_MACHINE = "nanopi_m1_plus_defconfig"
 

conf/machine/nanopi-m1.conf

@@ -0,0 +1,8 @@
+#@TYPE: Machine
+#@NAME: NanoPi M1
+#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo, based on #the Allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-nanopi-m1.dtb"
+UBOOT_MACHINE = "nanopi_m1_defconfig"

conf/machine/nanopi-neo-air.conf

@@ -5,7 +5,5 @@
 
 require conf/machine/include/sun8i.inc
 
-PREFERRED_VERSION_u-boot = "v2018.09%"
-
 KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo-air.dtb"
 UBOOT_MACHINE = "nanopi_neo_air_defconfig"

conf/machine/nanopi-neo-plus2.conf

@@ -4,8 +4,7 @@
 # on the Allwinner H5 SoC.
 
 require conf/machine/include/sun50i.inc
-
-PREFERRED_VERSION_u-boot = "v2018.09%"
+require conf/machine/include/hardware/ap6212a.inc
 
 KERNEL_DEVICETREE = "allwinner/sun50i-h5-nanopi-neo-plus2.dtb"
 UBOOT_MACHINE = "nanopi_neo_plus2_defconfig"

conf/machine/nanopi-neo.conf

@@ -4,8 +4,6 @@
 
 require conf/machine/include/sun8i.inc
 
-PREFERRED_VERSION_u-boot = "v2018.09%"
-
 KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo.dtb"
 UBOOT_MACHINE = "nanopi_neo_defconfig"
 

conf/machine/nanopi-neo2.conf

@@ -5,7 +5,5 @@
 
 require conf/machine/include/sun50i.inc
 
-PREFERRED_VERSION_u-boot = "v2018.09%"
-
 KERNEL_DEVICETREE = "allwinner/sun50i-h5-nanopi-neo2.dtb"
 UBOOT_MACHINE = "nanopi_neo2_defconfig"

conf/machine/olinuxino-a64.conf

@@ -7,5 +7,7 @@ require conf/machine/include/sun50i.inc
 
 PREFFERED_VERSION_u-boot = "v2018.09%"
 
+MACHINE_EXTRA_RRECOMMENDS += " linux-firmware-rtl8723"
+
 KERNEL_DEVICETREE = "allwinner/sun50i-a64-olinuxino.dtb"
 UBOOT_MACHINE = "a64-olinuxino_defconfig"

conf/machine/orange-pi-one.conf

@@ -4,8 +4,6 @@
 
 require conf/machine/include/sun8i.inc
 
-PREFERRED_VERSION_u-boot = "v2018.09%"
-
 KERNEL_DEVICETREE = "sun8i-h3-orangepi-one.dtb"
 UBOOT_MACHINE = "orangepi_one_defconfig"
 

conf/machine/orange-pi-pc-plus.conf

@@ -4,8 +4,6 @@
 
 require conf/machine/include/sun8i.inc
 
-PREFERRED_VERSION_u-boot = "v2018.09%"
-
 KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc-plus.dtb"
 UBOOT_MACHINE = "orangepi_pc_plus_defconfig"
 

conf/machine/orange-pi-pc.conf

@@ -4,8 +4,6 @@
 
 require conf/machine/include/sun8i.inc
 
-PREFERRED_VERSION_u-boot = "v2018.09%"
-
 KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc.dtb"
 UBOOT_MACHINE = "orangepi_pc_defconfig"
 

conf/machine/orange-pi-zero-plus2-h3.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: orange-pi-zero-plus2-h3
+#@DESCRIPTION: Machine configuration for the orange-pi-zero-plus2, based on Allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+require conf/machine/include/hardware/ap6212a.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-orangepi-zero-plus2.dtb"
+UBOOT_MACHINE = "orangepi_zero_plus2_h3_defconfig"

conf/machine/orange-pi-zero-plus2.conf

@@ -2,10 +2,8 @@
 #@NAME: orange-pi-zero-plus2
 #@DESCRIPTION: Machine configuration for the orange-pi-zero-plus2, base on Allwinner H5 CPU
 
-
 require conf/machine/include/sun50i.inc
-
-PREFERRED_VERSION_u-boot = "v2018.09%"
+require conf/machine/include/hardware/ap6212a.inc
 
 KERNEL_DEVICETREE = "allwinner/sun50i-h5-orangepi-zero-plus2.dtb"
 UBOOT_MACHINE = "orangepi_zero_plus2_defconfig"

conf/machine/orange-pi-zero.conf

@@ -4,8 +4,6 @@
 
 require conf/machine/include/sun8i.inc
 
-PREFERRED_VERSION_u-boot = "v2018.09%"
-
 KERNEL_DEVICETREE = "sun8i-h2-plus-orangepi-zero.dtb"
 UBOOT_MACHINE = "orangepi_zero_defconfig"
 

conf/machine/pcduino.conf

@@ -4,8 +4,6 @@
 
 require conf/machine/include/sun4i.inc
 
-PREFERRED_VERSION_u-boot = "v2018.09%"
-
 KERNEL_DEVICETREE = "sun4i-a10-pcduino.dtb"
 UBOOT_MACHINE = "Linksprite_pcDuino_defconfig"
 SUNXI_FEX_FILE = "sys_config/a10/pcduino.fex"

conf/machine/pine64-plus.conf

@@ -5,7 +5,5 @@
 
 require conf/machine/include/sun50i.inc
 
-PREFERRED_VERSION_u-boot = "v2018.09%"
-
 KERNEL_DEVICETREE = "allwinner/sun50i-a64-pine64-plus.dtb"
 UBOOT_MACHINE = "pine64_plus_defconfig"

recipes-bsp/u-boot/files/0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch

@@ -1,4 +1,4 @@
-From f4a77da23b3890b53efab6a927cbe99b76ef3b26 Mon Sep 17 00:00:00 2001
+From b1e4b9672d7bdd4a6a4d08b1514b46af25996cc8 Mon Sep 17 00:00:00 2001
 From: Florin Sarbu <florin@resin.io>
 Date: Wed, 12 Sep 2018 14:22:49 +0200
 Subject: [PATCH] nanopi_neo_air_defconfig: Enable eMMC support
@@ -10,11 +10,11 @@ Signed-off-by: Florin Sarbu <florin@resin.io>
  1 file changed, 1 insertion(+)
 
 diff --git a/configs/nanopi_neo_air_defconfig b/configs/nanopi_neo_air_defconfig
-index 8c362fa885..c7929ff015 100644
+index baaccf145e..77fa1489e4 100644
 --- a/configs/nanopi_neo_air_defconfig
 +++ b/configs/nanopi_neo_air_defconfig
-@@ -15,3 +15,4 @@ CONFIG_CONSOLE_MUX=y
+@@ -9,3 +9,4 @@ CONFIG_CONSOLE_MUX=y
  CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-neo-air"
  CONFIG_USB_EHCI_HCD=y
- CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
+ CONFIG_USB_OHCI_HCD=y
 +CONFIG_MMC_SUNXI_SLOT_EXTRA=2

recipes-bsp/u-boot/u-boot-sunxi.bb

@@ -20,8 +20,9 @@ UBOOT_MACHINE_meleg = "Mele_A1000G_config"
 
 SRC_URI = " \
 	git://github.com/linux-sunxi/u-boot-sunxi.git;protocol=git;branch=sunxi \
-	file://0002-gcc5-fixes.patch \
-	file://0003-gcc6-fixes.patch \
+	file://0001-gcc5-fixes.patch \
+	file://0002-gcc6-fixes.patch \
+	file://0003-No-gcc-version-specific-includes.patch \
 	"
 
 PE = "1"
@@ -35,3 +36,7 @@ S = "${WORKDIR}/git"
 PACKAGE_ARCH = "${MACHINE_ARCH}"
 
 SPL_BINARY="u-boot-sunxi-with-spl.bin"
+
+do_configure () {
+    oe_runmake -C ${S} O=${B} ${UBOOT_MACHINE}
+}

recipes-bsp/u-boot/u-boot-sunxi/0003-No-gcc-version-specific-includes.patch

@@ -0,0 +1,24 @@
+From bc4aa5814cbedbfaa1c79dfe7ea2571fee7f2d51 Mon Sep 17 00:00:00 2001
+From: Andrey Lebedev <andrey@lebedev.lt>
+Date: Wed, 22 Jan 2020 20:00:11 +0200
+Subject: [PATCH] No gcc version-specific includes
+
+In order to support gcc-5 and above. Fixes compilation errors like
+
+linux/compiler-gcc9.h: No such file or directory
+---
+ include/linux/compiler-gcc.h | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
+index 9896e547b9..5f0bd65f3a 100644
+--- a/include/linux/compiler-gcc.h
++++ b/include/linux/compiler-gcc.h
+@@ -90,4 +90,3 @@
+ #define __gcc_header(x) #x
+ #define _gcc_header(x) __gcc_header(linux/compiler-gcc##x.h)
+ #define gcc_header(x) _gcc_header(x)
+-#include gcc_header(__GNUC__)
+-- 
+2.20.1
+

recipes-bsp/u-boot/u-boot_%.bbappend

@@ -0,0 +1,29 @@
+FILESEXTRAPATHS_prepend_sunxi := "${THISDIR}/files:"
+
+DEPENDS_append_sunxi = " bc-native dtc-native swig-native python3-native flex-native bison-native "
+DEPENDS_append_sun50i = " atf-sunxi "
+
+COMPATIBLE_MACHINE_sunxi = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
+
+DEFAULT_PREFERENCE_sun4i="1"
+DEFAULT_PREFERENCE_sun5i="1"
+DEFAULT_PREFERENCE_sun7i="1"
+DEFAULT_PREFERENCE_sun8i="1"
+DEFAULT_PREFERENCE_sun50i="1"
+
+SRC_URI_append_sunxi = " \
+           file://0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch \
+           file://boot.cmd \
+           "
+
+UBOOT_ENV_SUFFIX_sunxi = "scr"
+UBOOT_ENV_sunxi = "boot"
+
+EXTRA_OEMAKE_append_sunxi = ' HOSTLDSHARED="${BUILD_CC} -shared ${BUILD_LDFLAGS} ${BUILD_CFLAGS}" '
+EXTRA_OEMAKE_append_sun50i = " BL31=${DEPLOY_DIR_IMAGE}/bl31.bin "
+
+do_compile_sun50i[depends] += "atf-sunxi:do_deploy"
+
+do_compile_append_sunxi() {
+    ${B}/tools/mkimage -C none -A arm -T script -d ${WORKDIR}/boot.cmd ${WORKDIR}/${UBOOT_ENV_BINARY}
+}

recipes-bsp/u-boot/u-boot_2018.09.bb

@@ -1,41 +0,0 @@
-DESCRIPTION="Upstream's U-boot configured for sunxi devices"
-
-require recipes-bsp/u-boot/u-boot.inc
-
-DEPENDS += " bc-native dtc-native swig-native python3-native flex-native bison-native "
-DEPENDS_append_sun50i = " atf-sunxi "
-
-LICENSE = "GPLv2+"
-LIC_FILES_CHKSUM = "file://Licenses/README;md5=30503fd321432fc713238f582193b78e"
-
-COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
-
-DEFAULT_PREFERENCE_sun4i="1"
-DEFAULT_PREFERENCE_sun5i="1"
-DEFAULT_PREFERENCE_sun7i="1"
-DEFAULT_PREFERENCE_sun8i="1"
-DEFAULT_PREFERENCE_sun50i="1"
-
-SRC_URI = "git://git.denx.de/u-boot.git;branch=master \
-           file://0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch \
-           file://boot.cmd \
-           "
-
-SRCREV = "f88b6facb87dc4a52f1630eb9d858c0f54c6628e"
-
-PV = "v2018.09+git${SRCPV}"
-PE = "2"
-
-S = "${WORKDIR}/git"
-
-UBOOT_ENV_SUFFIX = "scr"
-UBOOT_ENV = "boot"
-
-EXTRA_OEMAKE += ' HOSTLDSHARED="${BUILD_CC} -shared ${BUILD_LDFLAGS} ${BUILD_CFLAGS}" '
-EXTRA_OEMAKE_append_sun50i = " BL31=${DEPLOY_DIR_IMAGE}/bl31.bin "
-
-do_compile_sun50i[depends] += "atf-sunxi:do_deploy"
-
-do_compile_append() {
-    ${B}/tools/mkimage -C none -A arm -T script -d ${WORKDIR}/boot.cmd ${WORKDIR}/${UBOOT_ENV_BINARY}
-}

recipes-devtools/python/files/setup.py.patch

@@ -1,51 +0,0 @@
---- pyA20-0.2.1/setup.py	2014-09-04 12:17:18.000000000 +0200
-+++ pyA20-0.2.1/setup.py	2014-11-24 17:44:37.000000000 +0100
-@@ -43,31 +43,31 @@
-     Detect processor type
-     :return:
-     """
--    cpuinfo = open("/proc/cpuinfo", 'r')
--    for line in cpuinfo:
--        if "Hardware" in line:
--            processor = line.split(":")[1].rstrip()
-+    #cpuinfo = open("/proc/cpuinfo", 'r')
-+    #for line in cpuinfo:
-+    #    if "Hardware" in line:
-+    #        processor = line.split(":")[1].rstrip()
- 
--            if "sun4i" in processor:
--                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A10)")
-+    #        if "sun4i" in processor:
-+    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A10)")
- 
--            elif "sun5i" in processor:
--                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A13)")
-+    #        elif "sun5i" in processor:
-+    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A13)")
- 
--            elif "sun7i" in processor:
--                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A20)")
-+    #        elif "sun7i" in processor:
-+    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A20)")
- 
--            else:
--                print ("Detected processor: " + print_color("unknown"))
-+    #        else:
-+    #            print ("Detected processor: " + print_color("unknown"))
- 
- 
--            if processor_type not in processor:
--                print_warning()
-+    #        if processor_type not in processor:
-+    #            print_warning()
- 
--            return
-+    return
- 
--    print ("No processor detected")
--    print_warning()
-+    #print ("No processor detected")
-+    #print_warning()
- 
- 
- class build_ext(_build_ext):

recipes-devtools/python/pya20_0.2.12.bb

@@ -1,24 +1,23 @@
 DESCRIPTION = "A module to control Allwinner GPIO,SPI and I2C channels"
 HOMEPAGE = "https://pypi.python.org/pypi/pyA20"
 SECTION = "devel/python"
-LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://PKG-INFO;md5=bfe0261ded6cff75086193ec2f79129e"
-DEPENDS = "python"
+LICENSE = "GPLv3"
+LIC_FILES_CHKSUM = "file://PKG-INFO;md5=4e584373bb0f46ef1e423cb7df37847d"
+DEPENDS = "python3"
 
 # No GPIO mappings for other machines yet
 COMPATIBLE_MACHINE = "(olinuxino-a13|olinuxino-a10|olinuxino-a20|olinuxino-a10lime|olinuxino-a20lime|olinuxino-a20lime2|olinuxino-a13som|olinuxino-a20som)"
 
 SRC_URI = "https://pypi.python.org/packages/source/p/pyA20/pyA20-${PV}.tar.gz \
-           file://setup.py.patch \
            file://mapping.h \
           "
 S = "${WORKDIR}/pyA20-${PV}"
 
-inherit distutils
+inherit distutils3
 
 do_compile_prepend() { 
 cp ${WORKDIR}/mapping.h ${S}/pyA20/gpio/mapping.h
 }
 
-SRC_URI[md5sum] = "2290066bbe274000c53693959a8005b4"
-SRC_URI[sha256sum] = "b15e4ee1016b7eb52001cbccde3751868624a88d2adbb9adc5404628f7e59e7e"
+SRC_URI[md5sum] = "cab03b4931199804603d1074f6d8f48f"
+SRC_URI[sha256sum] = "4bef559a9c5a4d648d9834bad996cf2805b20d6063b8051029ffdf9deda2b536"

recipes-devtools/python/pya20som_0.2.1.bb

@@ -1,24 +0,0 @@
-DESCRIPTION = "A module to control Allwinner GPIO,SPI and I2C channels"
-HOMEPAGE = "https://pypi.python.org/pypi/pyA20SOM"
-SECTION = "devel/python"
-LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://PKG-INFO;md5=cf6345f2cb2acee98b01c493d68b8322"
-DEPENDS = "python"
-
-# No GPIO mappings for other machines yet
-COMPATIBLE_MACHINE = "olinuxino-a20som"
-
-SRC_URI = "https://pypi.python.org/packages/source/p/pyA20SOM/pyA20SOM-${PV}.tar.gz \
-           file://setup.py.patch \
-           file://mapping.h \
-          "
-S = "${WORKDIR}/pyA20SOM-${PV}"
-
-inherit distutils
-
-do_compile_prepend() { 
-cp ${WORKDIR}/mapping.h ${S}/pyA20SOM/gpio/mapping.h
-}
-
-SRC_URI[md5sum] = "a720115ef1d3dffe82f42f2157ca1c56"
-SRC_URI[sha256sum] = "1ac1025596cc112964f7caac9a6a523d5da61623c248ccc178c6cbb4bc1b4549"

recipes-graphics/libgles/sunxi-mali_git.bb

@@ -31,7 +31,7 @@ SRC_URI = "gitsm://github.com/linux-sunxi/sunxi-mali.git \
 
 S = "${WORKDIR}/git"
 
-DEPENDS = "libdrm xorgproto libump"
+DEPENDS = "libdrm xorgproto libump patchelf-native"
 
 PACKAGECONFIG ??= "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11', '', d)} ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland', '', d)}"
 PACKAGECONFIG[wayland] = "EGL_TYPE=framebuffer,,,"
@@ -70,11 +70,13 @@ do_install() {
 
     make libdir=${D}${libdir}/ includedir=${D}${includedir}/ install
     make libdir=${D}${libdir}/ includedir=${D}${includedir}/ install -C include
+    rm -f ${D}${includedir}/KHR/khrplatform.h
 
     # Fix .so name and create symlinks, binary package provides .so wich can't be included directly in package without triggering the 'dev-so' QA check
     # Packages like xf86-video-fbturbo dlopen() libUMP.so, so we do need to ship the .so files in ${PN}
 
     mv ${D}${libdir}/libMali.so ${D}${libdir}/libMali.so.3
+    patchelf --set-soname libMali.so.3 ${D}${libdir}/libMali.so.3
     ln -sf libMali.so.3 ${D}${libdir}/libMali.so
 
     for flib in libEGL.so.1.4 libGLESv1_CM.so.1.1 libGLESv2.so.2.0 ; do

recipes-graphics/mesa/mesa_%.bbappend

@@ -0,0 +1,5 @@
+# Enable lima and panfrost Mesa drivers
+PACKAGECONFIG_append_use-mailine-graphics = " lima panfrost"
+# Enable KMS renderonly Mesa support
+# See https://cgit.freedesktop.org/mesa/mesa/commit/?id=2b780fe89300199f2334539aa1678e9b68f0434f
+GALLIUMDRIVERS_append_use-mailine-graphics = ",kmsro"

recipes-kernel/linux-firmware/linux-firmware_%.bbappend

@@ -0,0 +1,13 @@
+# The brcmfmac driver looks for NVRAM files using the first entry in board
+# compatible since kernel >= 5.0:
+# https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0ad4b55b2f29784f93875e6231bf57cd233624a2
+# We create a link to the AP6212 module NVRAM file so that firmware is
+# autodetected by the driver.
+# WARNING: The following commit is required for NVRAM files to be included in
+# linux-firmware-bcm43430 package:
+# http://git.openembedded.org/openembedded-core/commit/?id=dde0f79f32fa6bab045ef60199903f74c4cc3393
+do_install_append() {
+	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2.txt
+	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2-h3.txt
+	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt
+}

recipes-kernel/linux/linux-mainline.inc

@@ -1,7 +1,5 @@
 SECTION = "kernel"
-DESCRIPTION = "Mainline Linux kernel"
 LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
 COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
 
 inherit kernel
@@ -12,6 +10,8 @@ require linux.inc
 # in something or kernel-yocto.bbclass will fail.
 KBRANCH ?= "master"
 
+DEPENDS += "rsync-native"
+
 # Pull in the devicetree files into the rootfs
 RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"
 
@@ -19,14 +19,14 @@ KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
 
 S = "${WORKDIR}/linux-${PV}"
 
-SRC_URI[md5sum] = "52fb710109527b042278359526588da8"
-SRC_URI[sha256sum] = "0bf0d5c64dafc1184e9aafd2f3ebb77aa88ddee881a7766436258feaa214d9ec"
-
 SRC_URI = "https://www.kernel.org/pub/linux/kernel/v5.x/linux-${PV}.tar.xz \
-        file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
-        file://defconfig \
-        "
+	file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
+	file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
+	file://defconfig \
+"
 
-SRC_URI_append_orange-pi-zero += "\
-	file://0001-add-wifi-support.patch \
-	"
+SRC_URI_append_use-mailine-graphics = " file://drm.cfg"
+SRC_URI_append_bananapi = " file://axp20x.cfg"
+SRC_URI_append_cubietruck = " file://axp20x.cfg"
+
+FILES_${KERNEL_PACKAGE_NAME}-base_append = " ${nonarch_base_libdir}/modules/${KERNEL_VERSION}/modules.builtin.modinfo"

recipes-kernel/linux/linux-mainline/0001-dts-orange-pi-zero-Add-wifi-support.patch

@@ -1,8 +1,8 @@
 diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
-index 6713d0f2b3f4..ad0829e8f716 100644
+index 84cd9c061..917986cce 100644
 --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
 +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
-@@ -80,19 +80,22 @@
+@@ -80,13 +80,15 @@
  		};
  	};
  
@@ -19,10 +19,16 @@ index 6713d0f2b3f4..ad0829e8f716 100644
  		gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
 +		startup-delay-us = <70000>;
 +		enable-active-high;
++
+ 	};
+ 
+ 	reg_vdd_cpux: vdd-cpux-regulator {
+@@ -106,10 +108,12 @@
+ 			  1300000 1>;
  	};
  
 -	wifi_pwrseq: wifi_pwrseq {
-+	pwrseq_wifi: pwrseq_wifi@0 {
++	pwrseq_wifi: pwrseq_wifi {
  		compatible = "mmc-pwrseq-simple";
 +		pinctrl-names = "default";
 +		pinctrl-0 = <&wifi_rst>;
@@ -32,10 +38,10 @@ index 6713d0f2b3f4..ad0829e8f716 100644
  	};
  };
  
-@@ -124,9 +127,11 @@
+@@ -140,9 +144,11 @@
+ };
+ 
  &mmc1 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc1_pins_a>;
 -	vmmc-supply = <&reg_vcc_wifi>;
 -	mmc-pwrseq = <&wifi_pwrseq>;
 +	vmmc-supply = <&reg_vcc3v3>;
@@ -46,7 +52,7 @@ index 6713d0f2b3f4..ad0829e8f716 100644
  	non-removable;
  	status = "okay";
  
-@@ -136,9 +141,30 @@
+@@ -152,6 +158,13 @@
  	 */
  	xr819: sdio_wifi@1 {
  		reg = <1>;
@@ -60,6 +66,11 @@ index 6713d0f2b3f4..ad0829e8f716 100644
  	};
  };
  
+@@ -208,3 +221,18 @@
+ 	status = "okay";
+ 	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
+ };
++
 +&pio {
 +	wifi_wake: wifi_wake {
 +		pins = "PG10";
@@ -74,6 +85,3 @@ index 6713d0f2b3f4..ad0829e8f716 100644
 +    };
 +};
 +
- &mmc1_pins_a {
- 	bias-pull-up;
- };

recipes-kernel/linux/linux-mainline/aarch64/defconfig

@@ -141,6 +141,11 @@ CONFIG_BT_LEDS=y
 # CONFIG_BT_DEBUGFS is not set
 CONFIG_BT_HCIUART=m
 CONFIG_BT_HCIUART_LL=y
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_PRIV=y
 CONFIG_CFG80211=m
 CONFIG_MAC80211=m
 CONFIG_MAC80211_LEDS=y
@@ -334,6 +339,7 @@ CONFIG_MFD_MAX77620=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_RK808=y
 CONFIG_MFD_SEC_CORE=y
+CONFIG_REGULATOR=y
 CONFIG_REGULATOR_AXP20X=y
 CONFIG_REGULATOR_FAN53555=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
@@ -494,6 +500,8 @@ CONFIG_VIRTIO_BALLOON=y
 CONFIG_VIRTIO_MMIO=y
 CONFIG_XEN_GNTDEV=y
 CONFIG_XEN_GRANT_DEV_ALLOC=y
+CONFIG_STAGING=y
+CONFIG_RTL8723BS=m
 CONFIG_COMMON_CLK_RK808=y
 CONFIG_COMMON_CLK_SCPI=y
 CONFIG_COMMON_CLK_CS2000_CP=y

recipes-kernel/linux/linux-mainline/arm/defconfig

@@ -485,8 +485,8 @@ CONFIG_CW1200_WLAN_SDIO=m
 CONFIG_CW1200_WLAN_SPI=m
 CONFIG_RSI_91X=m
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_INPUT_MOUSE=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_SUN4I=y
 CONFIG_INPUT_MISC=y

recipes-kernel/linux/linux-mainline/axp20x.cfg

@@ -0,0 +1,4 @@
+CONFIG_MFD_AXP20X_I2C=y
+CONFIG_MFD_AXP20X=y
+CONFIG_IIO=y
+CONFIG_AXP20X_POWER=y

recipes-kernel/linux/linux-mainline/drm.cfg

@@ -0,0 +1,9 @@
+CONFIG_DRM=y
+CONFIG_DRM_SUN4I=y
+CONFIG_DRM_SUN8I_DW_HDMI=y
+CONFIG_DRM_SUN8I_MIXER=y
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_DRM_LIMA=y
+CONFIG_DRM_PANFROST=y
+CONFIG_CMA=y
+CONFIG_DMA_CMA=y

recipes-kernel/linux/linux-mainline_4.19.46.bb

@@ -1,32 +0,0 @@
-SECTION = "kernel"
-DESCRIPTION = "Mainline Linux kernel"
-LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
-COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
-
-inherit kernel
-
-require linux.inc
-
-# Since we're not using git, this doesn't make a difference, but we need to fill
-# in something or kernel-yocto.bbclass will fail.
-KBRANCH ?= "master"
-
-# Pull in the devicetree files into the rootfs
-RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"
-
-KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
-
-S = "${WORKDIR}/linux-${PV}"
-
-SRC_URI[md5sum] = "5e171996b176df3db2150bcb47d042a7"
-SRC_URI[sha256sum] = "097b52fe8a872259f4a3dba571b2eaf7b9863d9cde5399c6b316dec0ef57e67a"
-
-SRC_URI = "https://www.kernel.org/pub/linux/kernel/v4.x/linux-${PV}.tar.xz \
-        file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
-        file://defconfig \
-        "
-
-SRC_URI_append_orange-pi-zero += "\
-	file://0001-add-wifi-support.patch \
-	"

recipes-kernel/linux/linux-mainline_5.10.2.bb

@@ -0,0 +1,8 @@
+require linux-mainline.inc
+
+DESCRIPTION = "Mainline Longterm Linux kernel"
+
+LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46"
+
+SRC_URI[md5sum] = "0751179f60de73eb2cd93f161fa52fcf"
+SRC_URI[sha256sum] = "3b84e13abae26af17ebccc4d7212f5843a991127a73a320848d5c6942ef781a2"

recipes-kernel/linux/linux-mainline_5.2-rc2.bb

@@ -1,35 +0,0 @@
-SECTION = "kernel"
-DESCRIPTION = "Mainline Linux kernel"
-LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
-COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
-
-inherit kernel
-
-require linux.inc
-
-# Since we're not using git, this doesn't make a difference, but we need to fill
-# in something or kernel-yocto.bbclass will fail.
-KBRANCH ?= "master"
-
-# Pull in the devicetree files into the rootfs
-RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"
-
-KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
-
-S = "${WORKDIR}/linux-${PV}"
-
-SRC_URI[md5sum] = "bf80c4ab5f475a2c0846340fb9eb6449"
-SRC_URI[sha256sum] = "8ec8258e75ebdcd8197328b8571435c246f55d7da7f6ed65e96aa8d4bff9a639"
-
-SRC_URI = "https://git.kernel.org/torvalds/t/linux-${PV}.tar.gz \
-        file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
-        file://defconfig \
-        "
-
-SRC_URI_append_orange-pi-zero += "\
-	file://0001-add-wifi-support.patch \
-	"
-
-FILES_${KERNEL_PACKAGE_NAME}-base_append = " ${nonarch_base_libdir}/modules/${KERNEL_VERSION}/modules.builtin.modinfo"
-

recipes-kernel/linux/linux-mainline_5.4.69.bb

@@ -0,0 +1,8 @@
+require linux-mainline.inc
+
+DESCRIPTION = "Mainline Longterm Linux kernel"
+
+LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
+
+SRC_URI[md5sum] = "98c8187b801f006ba203db0669e307a5"
+SRC_URI[sha256sum] = "a8b31d716b397303a183e42ad525ff2871024a43e3ea530d0fdf73b7f9d27da7"

recipes-kernel/linux/linux-sunxi/0004-arm-put-user-asm-fix.patch

@@ -0,0 +1,29 @@
+From 25a7e85eb0d58479f7d8895b1b29a648bd07d60e Mon Sep 17 00:00:00 2001
+From: Andrey Lebedev <andrey@lebedev.lt>
+Date: Mon, 20 Jan 2020 23:19:51 +0200
+Subject: [PATCH 2/2] Fix asm error in put_user under gcc version 8 and above
+
+Fixes these errors during compilation of linux-sunxi-3.4 kernel:
+/tmp/ccCGMQmS.s:648: Error: .err encountered
+
+Taken from https://patchwork.kernel.org/patch/10546809/
+---
+ arch/arm/include/asm/uaccess.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
+index b04850fd..abfafbbf 100644
+--- a/arch/arm/include/asm/uaccess.h
++++ b/arch/arm/include/asm/uaccess.h
+@@ -159,7 +159,7 @@ extern int __put_user_8(void *, unsigned long long);
+ 	({								\
+ 		unsigned long __limit = current_thread_info()->addr_limit - 1; \
+ 		const typeof(*(p)) __user *__tmp_p = (p);		\
+-		register const typeof(*(p)) __r2 asm("r2") = (x);	\
++		register typeof(*(p)) __r2 asm("r2") = (x);		\
+ 		register const typeof(*(p)) __user *__p asm("r0") = __tmp_p; \
+ 		register unsigned long __l asm("r1") = __limit;		\
+ 		register int __e asm("r0");				\
+-- 
+2.20.1
+

recipes-kernel/linux/linux-sunxi/0005-silence-warning.patch

@@ -0,0 +1,25 @@
+From 302604ee4a2011871cb26deaf69d567cf57d0fe3 Mon Sep 17 00:00:00 2001
+From: Andrey Lebedev <andrey@lebedev.lt>
+Date: Mon, 20 Jan 2020 23:20:07 +0200
+Subject: [PATCH 1/2] Silence annoying warning
+
+---
+ include/linux/log2.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/include/linux/log2.h b/include/linux/log2.h
+index fd7ff3d9..14458fdd 100644
+--- a/include/linux/log2.h
++++ b/include/linux/log2.h
+@@ -18,7 +18,7 @@
+ /*
+  * deal with unrepresentable constant logarithms
+  */
+-extern __attribute__((const, noreturn))
++extern __attribute__((const))
+ int ____ilog2_NaN(void);
+ 
+ /*
+-- 
+2.20.1
+

recipes-kernel/linux/linux-sunxi_3.4.bb

@@ -14,9 +14,12 @@ MACHINE_KERNEL_PR_append = "a"
 SRC_URI += "git://github.com/linux-sunxi/linux-sunxi.git;branch=sunxi-3.4;protocol=git \
         file://0001-compiler-gcc-integrate-the-various-compiler-gcc-345-.patch \
         file://0002-use-static-inline-in-ARM-ftrace.patch \
-        file://0001-gcc5-fixes.patch \
+        file://0003-gcc5-fixes.patch \
+        file://0004-arm-put-user-asm-fix.patch \
+        file://0005-silence-warning.patch \
         file://defconfig \
         "
+LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
 
 S = "${WORKDIR}/git"
 

recipes-kernel/xradio/xradio.bb

@@ -11,9 +11,11 @@ RDEPENDS_${PN} += "xradio-firmware"
 
 COMPATIBLE_MACHINE = "orange-pi-zero"
 
-SRCREV = "d649e5a78efdc56ecd0951e35ca60db175650232"
+SRCREV = "279868ac96f6db34b65f68c6722830fa0aacb86b"
 
-SRC_URI = "git://github.com/fifteenhex/xradio.git;protocol=https \
+SRC_URI = "\
+	   git://github.com/dbeinder/xradio.git;protocol=https;branch=karabek_rebase \
+	file://0001-Enable-out-of-tree-compilation.patch \
           "
 
 S = "${WORKDIR}/git"

recipes-kernel/xradio/xradio/0001-Enable-out-of-tree-compilation.patch

@@ -0,0 +1,30 @@
+From 15651d333da5429a1544f0a17d5f02c74f693ad7 Mon Sep 17 00:00:00 2001
+From: Marek Belisko <marek.belisko@open-nandra.com>
+Date: Thu, 15 Oct 2020 14:45:07 +0200
+Subject: [PATCH] Enable out of tree compilation
+
+Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
+---
+ Makefile | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/Makefile b/Makefile
+index 7a0de9a..ee75f0b 100644
+--- a/Makefile
++++ b/Makefile
+@@ -1,9 +1,9 @@
+ # SPDX-License-Identifier: GPL-2.0-only
+ 
+ # # Standalone Makefile - uncomment for out-of-tree compilation
+-# CONFIG_WLAN_VENDOR_XRADIO := m
+-# ccflags-y += -DCONFIG_XRADIO_USE_EXTENSIONS
+-# ccflags-y += -DCONFIG_XRADIO_WAPI_SUPPORT
++CONFIG_WLAN_VENDOR_XRADIO := m
++ccflags-y += -DCONFIG_XRADIO_USE_EXTENSIONS
++ccflags-y += -DCONFIG_XRADIO_WAPI_SUPPORT
+ 
+ # Kernel part
+ 
+-- 
+2.7.4
+

wic/sunxi-sdcard-image.wks.in

@@ -0,0 +1,18 @@
+# short-description: Create SD card image with a boot partition
+# long-description:
+# Create an image that can be written onto a SD card using dd for use
+# with Allwinner arm (32-bit) SoC family
+#
+# The disk layout used is:
+#  - --------------------------- -------------- --------------
+# | | u-boot-sunxi-with-spl.bin |     boot     |    rootfs    |
+#  - --------------------------- -------------- --------------
+# ^ ^                           ^              ^              ^
+# | |                           |              |              |
+# 0 |                         2MiB  ${SUNXI_BOOT_SPACE}MiB  ${SUNXI_BOOT_SPACE}MiB + rootfs + IMAGE_EXTRA_SPACE
+#   8KiB 
+#
+
+part u-boot --source rawcopy --sourceparams="file=${SPL_BINARY}" --ondisk mmcblk0 --no-table --align 8
+part /boot --source bootimg-partition --ondisk mmcblk0 --fstype=vfat --label boot --active --align 2048 --fixed-size ${SUNXI_BOOT_SPACE}
+part /     --source rootfs --ondisk mmcblk0 --fstype=ext4 --align 2048