Merge pull request #212 from cameronokeeffe/rocko

Added pcDuino3 Board

classes/sdcard_image-sunxi.bbclass

@@ -7,8 +7,8 @@ inherit image_types
 # The disk layout used is:
 #
 #    0                      -> 8*1024                           - reserverd
-#    8*1024                 -> 32*1024                          - 
-#    32*1024                -> 2048*1024                        - 
+#    8*1024                 ->                                  - arm combined spl/u-boot or aarch64 spl
+#    40*1024                ->                                  - aarch64 u-boot
 #    2048*1024              -> BOOT_SPACE                       - bootloader and kernel
 #
 #
@@ -20,19 +20,19 @@ IMAGE_TYPEDEP_sunxi-sdimg = "${SDIMG_ROOTFS_TYPE}"
 BOOTDD_VOLUME_ID ?= "${MACHINE}"
 
 # Boot partition size [in KiB]
-BOOT_SPACE ?= "20480"
+BOOT_SPACE ?= "40960"
 
 # First partition begin at sector 2048 : 2048*1024 = 2097152
 IMAGE_ROOTFS_ALIGNMENT = "2048"
 
-# Use an uncompressed ext3 by default as rootfs
+# Use an uncompressed ext4 by default as rootfs
 SDIMG_ROOTFS_TYPE ?= "ext4"
 SDIMG_ROOTFS = "${IMGDEPLOYDIR}/${IMAGE_NAME}.rootfs.${SDIMG_ROOTFS_TYPE}"
 
-IMAGE_DEPENDS_sunxi-sdimg += " \
-			parted-native \
-			mtools-native \
-			dosfstools-native \
+do_image_sunxi_sdimg[depends] += " \
+			parted-native:do_populate_sysroot \
+			mtools-native:do_populate_sysroot \
+			dosfstools-native:do_populate_sysroot \
 			virtual/kernel:do_deploy \
 			virtual/bootloader:do_deploy \
 			"
@@ -64,17 +64,23 @@ IMAGE_CMD_sunxi-sdimg () {
 	rm -f ${WORKDIR}/boot.img
 	mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
 
-	mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::uImage
+	mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::${KERNEL_IMAGETYPE}
 
 	# Copy device tree file
 	if test -n "${KERNEL_DEVICETREE}"; then
 		for DTS_FILE in ${KERNEL_DEVICETREE}; do
 			DTS_BASE_NAME=`basename ${DTS_FILE} | awk -F "." '{print $1}'`
+			DTS_DIR_NAME=`dirname ${DTS_FILE}`
 			if [ -e ${DEPLOY_DIR_IMAGE}/"${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb" ]; then
+
+				if [ ${DTS_FILE} != ${DTS_BASE_NAME}.dtb ]; then
+					mmd -i ${WORKDIR}/boot.img ::/${DTS_DIR_NAME}
+				fi
+
 				kernel_bin="`readlink ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin`"
 				kernel_bin_for_dtb="`readlink ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb | sed "s,$DTS_BASE_NAME,${MACHINE},g;s,\.dtb$,.bin,g"`"
 				if [ $kernel_bin = $kernel_bin_for_dtb ]; then
-					mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb ::/${DTS_BASE_NAME}.dtb
+					mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb ::/${DTS_FILE}
 				fi
 			fi
 		done
@@ -104,7 +110,15 @@ IMAGE_CMD_sunxi-sdimg () {
 		dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
 	fi
 
-	#write u-boot and spl at the beginint of sdcard in one shot
-	dd if=${DEPLOY_DIR_IMAGE}/u-boot-sunxi-with-spl.bin of=${SDIMG} bs=1024 seek=8 conv=notrunc
-
+	# write u-boot-spl at the begining of sdcard in one shot
+	SPL_FILE=$(basename ${SPL_BINARY})
+	dd if=${DEPLOY_DIR_IMAGE}/${SPL_FILE} of=${SDIMG} bs=1024 seek=8 conv=notrunc
+}
+
+# write uboot.itb for arm64 boards
+IMAGE_CMD_sunxi-sdimg_append_sun50i () {
+	if [ -e "${DEPLOY_DIR_IMAGE}/${UBOOT_BINARY}" ]
+	then
+		dd if=${DEPLOY_DIR_IMAGE}/${UBOOT_BINARY} of=${SDIMG} bs=1024 seek=40 conv=notrunc
+	fi
 }

conf/machine/include/sun50i.inc

@@ -0,0 +1,4 @@
+require conf/machine/include/sunxi64.inc
+require conf/machine/include/arm/arch-armv8.inc
+
+SOC_FAMILY = "sun50i"

conf/machine/include/sunxi.inc

@@ -12,7 +12,7 @@ XSERVER = "xserver-xorg \
            xf86-input-mouse \
            xf86-input-keyboard"
 
-PREFERRED_PROVIDER_virtual/kernel ?= "linux"
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
 PREFERRED_PROVIDER_u-boot ?= "u-boot"
 PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
 
@@ -28,5 +28,7 @@ UBOOT_LOCALVERSION = "-g${@d.getVar('SRCPV', True).partition('+')[2][0:7]}"
 UBOOT_ENTRYPOINT ?= "0x40008000"
 UBOOT_LOADADDRESS ?= "0x400080OB00"
 
+SPL_BINARY ?= "u-boot-sunxi-with-spl.bin"
+
 SERIAL_CONSOLE ?= "115200 ttyS0"
 MACHINE_FEATURES ?= "alsa apm keyboard rtc serial screen usbgadget usbhost vfat"

conf/machine/include/sunxi64.inc

@@ -0,0 +1,24 @@
+SOC_FAMILY ??= ""
+include conf/machine/include/soc-family.inc
+
+PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
+PREFERRED_PROVIDER_u-boot ?= "u-boot"
+PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
+
+KERNEL_IMAGETYPE ?= "Image"
+
+IMAGE_CLASSES += "sdcard_image-sunxi"
+IMAGE_FSTYPES += "ext4 tar.gz sunxi-sdimg"
+
+MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"
+
+UBOOT_LOCALVERSION = "-g${@d.getVar('SRCPV', True).partition('+')[2][0:7]}"
+
+UBOOT_ENTRYPOINT ?= "0x40008000"
+UBOOT_LOADADDRESS ?= "0x400080OB00"
+
+UBOOT_BINARY ?= "u-boot.itb"
+SPL_BINARY ?= "spl/sunxi-spl.bin"
+
+SERIAL_CONSOLE ?= "115200 ttyS0"
+MACHINE_FEATURES ?= "alsa apm keyboard rtc serial screen usbgadget usbhost vfat"

conf/machine/nanopi-neo-air.conf

@@ -0,0 +1,11 @@
+#@TYPE: Machine
+#@NAME: nanopi-neo-air
+#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo Air, based
+# on the Allwinner H3 CPU.
+
+require conf/machine/include/sun8i.inc
+
+PREFERRED_VERSION_u-boot = "v2017.11%"
+
+KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo-air.dtb"
+UBOOT_MACHINE = "nanopi_neo_air_defconfig"

conf/machine/nanopi-neo.conf

@@ -4,10 +4,8 @@
 
 require conf/machine/include/sun8i.inc
 
-PREFERRED_VERSION_linux = "4.11.0+git%"
-PREFERRED_VERSION_u-boot = "v2017.03%"
+PREFERRED_VERSION_u-boot = "v2017.11%"
 
 KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo.dtb"
 UBOOT_MACHINE = "nanopi_neo_defconfig"
 
-DEFAULTTUNE = "cortexa7hf-neon-vfpv4"

conf/machine/orange-pi-one.conf

@@ -4,10 +4,8 @@
 
 require conf/machine/include/sun8i.inc
 
-PREFERRED_VERSION_linux = "4.11.0+git%"
-PREFERRED_VERSION_u-boot = "v2017.03%"
+PREFERRED_VERSION_u-boot = "v2017.11%"
 
 KERNEL_DEVICETREE = "sun8i-h3-orangepi-one.dtb"
 UBOOT_MACHINE = "orangepi_one_defconfig"
 
-DEFAULTTUNE = "cortexa7hf-neon-vfpv4"

conf/machine/orange-pi-pc-plus.conf

@@ -0,0 +1,11 @@
+#@TYPE: Machine
+#@NAME: orange-pi-pc-plus
+#@DESCRIPTION: Machine configuration for the orange-pi-pc-plus, base on allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+PREFERRED_VERSION_u-boot = "v2017.03%"
+
+KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc-plus.dtb"
+UBOOT_MACHINE = "orangepi_pc_plus_defconfig"
+

conf/machine/orange-pi-pc.conf

@@ -4,10 +4,8 @@
 
 require conf/machine/include/sun8i.inc
 
-PREFERRED_VERSION_linux = "4.11.0+git%"
-PREFERRED_VERSION_u-boot = "v2017.03%"
+PREFERRED_VERSION_u-boot = "v2017.11%"
 
 KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc.dtb"
 UBOOT_MACHINE = "orangepi_pc_defconfig"
 
-DEFAULTTUNE = "cortexa7hf-neon-vfpv4"

conf/machine/orange-pi-zero-plus2.conf

@@ -0,0 +1,11 @@
+#@TYPE: Machine
+#@NAME: orange-pi-zero-plus2
+#@DESCRIPTION: Machine configuration for the orange-pi-zero-plus2, base on Allwinner H5 CPU
+
+
+require conf/machine/include/sun50i.inc
+
+PREFERRED_VERSION_u-boot = "v2017.11%"
+
+KERNEL_DEVICETREE = "allwinner/sun50i-h5-orangepi-zero-plus2.dtb"
+UBOOT_MACHINE = "orangepi_zero_plus2_defconfig"

conf/machine/orange-pi-zero.conf

@@ -4,10 +4,8 @@
 
 require conf/machine/include/sun8i.inc
 
-PREFERRED_VERSION_linux = "4.11.0+git%"
-PREFERRED_VERSION_u-boot = "v2017.03%"
+PREFERRED_VERSION_u-boot = "v2017.11%"
 
 KERNEL_DEVICETREE = "sun8i-h2-plus-orangepi-zero.dtb"
 UBOOT_MACHINE = "orangepi_zero_defconfig"
 
-DEFAULTTUNE = "cortexa7hf-neon-vfpv4"

conf/machine/pcduino.conf

@@ -4,8 +4,7 @@
 
 require conf/machine/include/sun4i.inc
 
-PREFERRED_VERSION_linux = "4.11.0+git%"
-PREFERRED_VERSION_u-boot = "v2017.03%"
+PREFERRED_VERSION_u-boot = "v2017.11%"
 
 KERNEL_DEVICETREE = "sun4i-a10-pcduino.dtb"
 UBOOT_MACHINE = "Linksprite_pcDuino_defconfig"

conf/machine/pcduino3.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: Linksprite A20-pcduino3 Board
+#@DESCRIPTION: Machine configuration for the pcDuino 3, based on Allwinner A20 CPU
+
+require conf/machine/include/sun7i.inc
+
+KERNEL_DEVICETREE = "sun7i-a20-pcduino3.dtb"
+UBOOT_MACHINE = "Linksprite_pcDuino3_defconfig"
+SUNXI_FEX_FILE = "sys_config/a20/linksprite_pcduino3.fex"

recipes-bsp/atf/atf-sunxi_git.bb

@@ -0,0 +1,27 @@
+DESCRIPTION = "ARM Trusted Firmware Allwinner"
+LICENSE = "BSD"
+LIC_FILES_CHKSUM = "file://license.md;md5=829bdeb34c1d9044f393d5a16c068371"
+
+SRC_URI = "git://github.com/apritzel/arm-trusted-firmware;nobranch=1"
+SRCREV = "aa75c8da415158a94b82a430b2b40000778e851f"
+
+S = "${WORKDIR}/git"
+B = "${WORKDIR}/build"
+
+COMPATIBLE_MACHINE = "(sun50i)"
+
+PLATFORM_sun50i = "sun50iw1p1"
+
+LDFLAGS[unexport] = "1"
+
+do_compile() {
+    oe_runmake -C ${S} BUILD_BASE=${B} \
+      CROSS_COMPILE=${TARGET_PREFIX} \
+      PLAT=${PLATFORM} \
+      bl31 \
+      all
+}
+
+do_install() {
+    install -D -p -m 0644 ${B}/${PLATFORM}/release/bl31.bin ${DEPLOY_DIR_IMAGE}/bl31.bin
+}

recipes-bsp/u-boot/files/0001-sunxi-add-A20-OLinuXino-Lime2-eMMC-defconfig.patch

@@ -1,49 +0,0 @@
-From f50ee5d9684ddc237d86841fb57a0cc6daaa76e7 Mon Sep 17 00:00:00 2001
-From: Diego Rondini <diego.rondini@kynetics.com>
-Date: Thu, 13 Apr 2017 06:51:39 +0000
-Subject: [PATCH] sunxi: add A20-OLinuXino-Lime2-eMMC defconfig
-
----
- configs/A20-OLinuXino-Lime2-eMMC_defconfig | 30 ++++++++++++++++++++++++++++++
- 1 file changed, 30 insertions(+)
- create mode 100644 configs/A20-OLinuXino-Lime2-eMMC_defconfig
-
-diff --git a/configs/A20-OLinuXino-Lime2-eMMC_defconfig b/configs/A20-OLinuXino-Lime2-eMMC_defconfig
-new file mode 100644
-index 0000000..b7be1a2
---- /dev/null
-+++ b/configs/A20-OLinuXino-Lime2-eMMC_defconfig
-@@ -0,0 +1,30 @@
-+CONFIG_ARM=y
-+CONFIG_ARCH_SUNXI=y
-+CONFIG_MACH_SUN7I=y
-+CONFIG_DRAM_CLK=384
-+CONFIG_MMC0_CD_PIN="PH1"
-+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
-+CONFIG_USB0_VBUS_PIN="PC17"
-+CONFIG_USB0_VBUS_DET="PH5"
-+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-olinuxino-lime2-emmc"
-+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-+CONFIG_SYS_EXTRA_OPTIONS="SUNXI_GMAC,RGMII,AHCI,SATAPWR=SUNXI_GPC(3)"
-+CONFIG_SPL=y
-+CONFIG_SPL_I2C_SUPPORT=y
-+# CONFIG_CMD_IMLS is not set
-+# CONFIG_CMD_FLASH is not set
-+CONFIG_CMD_DFU=y
-+CONFIG_CMD_USB_MASS_STORAGE=y
-+# CONFIG_CMD_FPGA is not set
-+CONFIG_DFU_RAM=y
-+CONFIG_RTL8211X_PHY_FORCE_MASTER=y
-+CONFIG_ETH_DESIGNWARE=y
-+CONFIG_AXP_ALDO3_VOLT=2800
-+CONFIG_AXP_ALDO4_VOLT=2800
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_USB_MUSB_GADGET=y
-+CONFIG_USB_GADGET=y
-+CONFIG_USB_GADGET_DOWNLOAD=y
-+CONFIG_G_DNL_MANUFACTURER="Allwinner Technology"
-+CONFIG_G_DNL_VENDOR_NUM=0x1f3a
-+CONFIG_G_DNL_PRODUCT_NUM=0x1010
--- 
-1.9.1
-

recipes-bsp/u-boot/files/aarch64/boot.cmd

@@ -0,0 +1,11 @@
+# Default to (primary) SD
+rootdev=mmcblk0p2
+if itest.b *0x28 == 0x02 ; then
+	# U-Boot loaded from eMMC or secondary SD so use it for rootfs too
+	echo "U-boot loaded from eMMC or secondary SD"
+	rootdev=mmcblk1p2
+fi
+setenv bootargs console=${console} console=tty1 root=/dev/${rootdev} rootwait panic=10 ${extra}
+load mmc 0:1 ${fdt_addr_r} ${fdtfile}
+load mmc 0:1 ${kernel_addr_r} Image
+booti ${kernel_addr_r} - ${fdt_addr_r}

recipes-bsp/u-boot/files/u-boot-pylibfdt-native-build.patch

@@ -0,0 +1,12 @@
+diff --git a/tools/Makefile b/tools/Makefile
+index 5db2a54..54bd224 100644
+--- a/tools/Makefile
++++ b/tools/Makefile
+@@ -134,6 +134,7 @@ tools/_libfdt.so: $(LIBFDT_SRCS) $(LIBFDT_SWIG)
+ 	$(Q)unset CC; \
+ 	unset CROSS_COMPILE; \
+ 	LDFLAGS="$(HOSTLDFLAGS)" CFLAGS= VERSION="u-boot-$(UBOOTVERSION)" \
++		CC="$(HOSTCC)" LDSHARED="$(HOSTLDSHARED)" \
+ 		CPPFLAGS="$(_hostc_flags)" OBJDIR=tools \
+ 		SOURCES="$(LIBFDT_SRCS) tools/libfdt.i" \
+ 		SWIG_OPTS="-I$(srctree)/lib/libfdt -I$(srctree)/lib" \

recipes-bsp/u-boot/u-boot_2017.03.bb

@@ -1,49 +0,0 @@
-DESCRIPTION="Upstream's U-boot configured for sunxi devices"
-
-require recipes-bsp/u-boot/u-boot.inc
-
-DEPENDS += "dtc-native"
-
-LICENSE = "GPLv2"
-
-LIC_FILES_CHKSUM = "\
-file://Licenses/Exceptions;md5=338a7cb1e52d0d1951f83e15319a3fe7 \
-file://Licenses/bsd-2-clause.txt;md5=6a31f076f5773aabd8ff86191ad6fdd5 \
-file://Licenses/bsd-3-clause.txt;md5=4a1190eac56a9db675d58ebe86eaf50c \
-file://Licenses/eCos-2.0.txt;md5=b338cb12196b5175acd3aa63b0a0805c \
-file://Licenses/gpl-2.0.txt;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
-file://Licenses/ibm-pibs.txt;md5=c49502a55e35e0a8a1dc271d944d6dba \
-file://Licenses/isc.txt;md5=ec65f921308235311f34b79d844587eb \
-file://Licenses/lgpl-2.0.txt;md5=5f30f0716dfdd0d91eb439ebec522ec2 \
-file://Licenses/lgpl-2.1.txt;md5=4fbd65380cdd255951079008b364516c \
-file://Licenses/x11.txt;md5=b46f176c847b8742db02126fb8af92e2 \
-"
-
-COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i)"
-
-DEFAULT_PREFERENCE_sun4i="1"
-DEFAULT_PREFERENCE_sun5i="1"
-DEFAULT_PREFERENCE_sun7i="1"
-DEFAULT_PREFERENCE_sun8i="1"
-
-SRC_URI = "git://git.denx.de/u-boot.git;branch=master \
-           file://boot.cmd \
-           file://0001-sunxi-add-A20-OLinuXino-Lime2-eMMC-defconfig.patch \
-           "
-
-SRCREV = "8537ddd769f460d7fb7a62a3dcc9669049702e51"
-
-PV = "v2017.03+git${SRCPV}"
-
-PE = "2"
-
-S = "${WORKDIR}/git"
-
-SPL_BINARY="u-boot-sunxi-with-spl.bin"
-
-UBOOT_ENV_SUFFIX = "scr"
-UBOOT_ENV = "boot"
-
-do_compile_append() {
-    ${B}/tools/mkimage -C none -A arm -T script -d ${WORKDIR}/boot.cmd ${WORKDIR}/${UBOOT_ENV_BINARY}
-}

recipes-bsp/u-boot/u-boot_2017.11.bb

@@ -0,0 +1,41 @@
+DESCRIPTION="Upstream's U-boot configured for sunxi devices"
+
+require recipes-bsp/u-boot/u-boot.inc
+
+DEPENDS += " bc-native dtc-native swig-native python3-native "
+DEPENDS_append_sun50i = " atf-sunxi "
+
+LICENSE = "GPLv2+"
+LIC_FILES_CHKSUM = "file://Licenses/README;md5=a2c678cfd4a4d97135585cad908541c6"
+
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
+
+DEFAULT_PREFERENCE_sun4i="1"
+DEFAULT_PREFERENCE_sun5i="1"
+DEFAULT_PREFERENCE_sun7i="1"
+DEFAULT_PREFERENCE_sun8i="1"
+DEFAULT_PREFERENCE_sun50i="1"
+
+SRC_URI = "git://git.denx.de/u-boot.git;branch=master \
+           file://u-boot-pylibfdt-native-build.patch \
+           file://boot.cmd \
+           "
+
+SRCREV = "c253573f3e269fd9a24ee6684d87dd91106018a5"
+
+PV = "v2017.11+git${SRCPV}"
+PE = "2"
+
+S = "${WORKDIR}/git"
+
+UBOOT_ENV_SUFFIX = "scr"
+UBOOT_ENV = "boot"
+
+EXTRA_OEMAKE += ' HOSTLDSHARED="${BUILD_CC} -shared ${BUILD_LDFLAGS} ${BUILD_CFLAGS}" '
+EXTRA_OEMAKE_append_sun50i = " BL31=${DEPLOY_DIR_IMAGE}/bl31.bin "
+
+do_compile_sun50i[depends] += "atf-sunxi:do_deploy"
+
+do_compile_append() {
+    ${B}/tools/mkimage -C none -A arm -T script -d ${WORKDIR}/boot.cmd ${WORKDIR}/${UBOOT_ENV_BINARY}
+}

recipes-devtools/python/pya20_0.2.1.bb

@@ -8,7 +8,7 @@ DEPENDS = "python"
 # No GPIO mappings for other machines yet
 COMPATIBLE_MACHINE = "(olinuxino-a13|olinuxino-a10|olinuxino-a20|olinuxino-a10lime|olinuxino-a20lime|olinuxino-a20lime2|olinuxino-a13som|olinuxino-a20som)"
 
-SRC_URI = "http://pypi.python.org/packages/source/p/pyA20/pyA20-${PV}.tar.gz \
+SRC_URI = "https://pypi.python.org/packages/source/p/pyA20/pyA20-${PV}.tar.gz \
            file://setup.py.patch \
            file://mapping.h \
           "

recipes-devtools/python/pya20som_0.2.1.bb

@@ -8,7 +8,7 @@ DEPENDS = "python"
 # No GPIO mappings for other machines yet
 COMPATIBLE_MACHINE = "olinuxino-a20som"
 
-SRC_URI = "http://pypi.python.org/packages/source/p/pyA20SOM/pyA20SOM-${PV}.tar.gz \
+SRC_URI = "https://pypi.python.org/packages/source/p/pyA20SOM/pyA20SOM-${PV}.tar.gz \
            file://setup.py.patch \
            file://mapping.h \
           "

recipes-kernel/linux/linux-4.9.20/0001-ARM-dts-sunxi-Change-node-name-for-pwrseq-pin-on-Oli.patch

@@ -1,35 +0,0 @@
-From 3116d37651d77125bf50f81f859b1278e02ccce6 Mon Sep 17 00:00:00 2001
-From: Emmanuel Vadot <manu@bidouilliste.com>
-Date: Wed, 14 Dec 2016 15:57:24 +0100
-Subject: [PATCH] ARM: dts: sunxi: Change node name for pwrseq pin on
- Olinuxino-lime2-emmc
-
-The node name for the power seq pin is mmc2@0 like the mmc2_pins_a one.
-This makes the original node (mmc2_pins_a) scrapped out of the dtb and
-result in a unusable eMMC if U-Boot didn't configured the pins to the
-correct functions.
-
-Upstream-Status: Backport from v4.10
-
-Signed-off-by: Emmanuel Vadot <manu@bidouilliste.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
-index 5ea4915..10d3074 100644
---- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2-emmc.dts
-@@ -56,7 +56,7 @@
- };
- 
- &pio {
--	mmc2_pins_nrst: mmc2@0 {
-+	mmc2_pins_nrst: mmc2-rst-pin {
- 		allwinner,pins = "PC16";
- 		allwinner,function = "gpio_out";
- 		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
--- 
-2.7.4
-

recipes-kernel/linux/linux-mainline/0001-arm64-dts-orange-pi-zero-plus2-fix-sdcard-detect.patch

@@ -0,0 +1,29 @@
+From 1596e282f52c8f43fd1cc4a39096f28563558a5c Mon Sep 17 00:00:00 2001
+From: Sergey Matyukevich <geomatsi@gmail.com>
+Date: Fri, 3 Nov 2017 22:12:43 +0300
+Subject: [PATCH 1/2] arm64: dts: orange-pi-zero-plus2: fix sdcard detect
+
+The sdcard detect pin on orange-pi-zero-plus2 is pulled up.
+Fix cd-gpio description to enable sdcard detect.
+
+Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+index b6b7a561df8c..a42fd79a62a3 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+@@ -71,7 +71,7 @@
+ 	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
+ 	vmmc-supply = <&reg_vcc3v3>;
+ 	bus-width = <4>;
+-	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
++	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+ 	status = "okay";
+ };
+ 
+-- 
+2.11.0
+

recipes-kernel/linux/linux-mainline/0002-arm64-dts-orange-pi-zero-plus2-enable-AP6212a-WiFi-B.patch

@@ -0,0 +1,74 @@
+From 4d470855525b5993e766ad9f9304482739ba918d Mon Sep 17 00:00:00 2001
+From: Sergey Matyukevich <geomatsi@gmail.com>
+Date: Fri, 3 Nov 2017 22:24:45 +0300
+Subject: [PATCH 2/2] arm64: dts: orange-pi-zero-plus2: enable AP6212a WiFi/BT
+ combo
+
+Enable AP6212a WiFi/BT combo chip on orange-pi-zero-plus2 board:
+- WiFi SDIO interface is connected to MMC1
+- WiFi REG_ON pin connected to gpio PA9: attach to mmc-pwrseq
+- WiFi HOST_WAKE pin connected to gpio PL7
+- BT is connected to UART1
+
+Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
+---
+ .../allwinner/sun50i-h5-orangepi-zero-plus2.dts    | 32 ++++++++++++++++++++++
+ 1 file changed, 32 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+index a42fd79a62a3..d415b7b67cce 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-zero-plus2.dts
+@@ -64,6 +64,13 @@
+ 		regulator-min-microvolt = <3300000>;
+ 		regulator-max-microvolt = <3300000>;
+ 	};
++
++	wifi_pwrseq: wifi_pwrseq {
++		compatible = "mmc-pwrseq-simple";
++		pinctrl-names = "default";
++		reset-gpios = <&pio 0 9 GPIO_ACTIVE_LOW>; /* PA9 */
++		post-power-on-delay-ms = <200>;
++	};
+ };
+ 
+ &mmc0 {
+@@ -75,6 +82,25 @@
+ 	status = "okay";
+ };
+ 
++&mmc1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc1_pins_a>;
++	vmmc-supply = <&reg_vcc3v3>;
++	vqmmc-supply = <&reg_vcc3v3>;
++	mmc-pwrseq = <&wifi_pwrseq>;
++	bus-width = <4>;
++	non-removable;
++	status = "okay";
++
++	brcmf: wifi@1 {
++		reg = <1>;
++		compatible = "brcm,bcm4329-fmac";
++		interrupt-parent = <&r_pio>;
++		interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>;	/* PL7 */
++		interrupt-names = "host-wake";
++	};
++};
++
+ &mmc2 {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&mmc2_8bit_pins>;
+@@ -90,3 +116,9 @@
+ 	pinctrl-0 = <&uart0_pins_a>;
+ 	status = "okay";
+ };
++
++&uart1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
++	status = "okay";
++};
+-- 
+2.11.0
+

recipes-kernel/linux/linux-mainline/0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch

@@ -0,0 +1,66 @@
+From 4ca766a768e783ee5198f1935b7f46a5df9b4a35 Mon Sep 17 00:00:00 2001
+From: Jelle van der Waa <jelle@vdwaa.nl>
+Date: Tue, 23 Jan 2018 15:58:44 -0800
+Subject: [PATCH] ARM: dts: nanopi-neo-air: Add WiFi / eMMC
+
+Enable the WiFi (AP6212) chip and eMMC support for the NanoPi NEO Air.
+
+This patch was originally submitted by Jelle van der Waa. Martin Kelly
+modified it to compile on the latest kernel, fixed up some review
+comments from Maxime Ripard, and re-tested the patch.
+
+Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
+Cc: linux-sunxi@googlegroups.com
+Cc: devicetree@vger.kernel.org
+Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
+Signed-off-by: Martin Kelly <mkelly@xevo.com>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+---
+ arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts | 24 ++++++++++++++++++++++++
+ 1 file changed, 24 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+index 03ff6f8b93ff..920849092cc8 100644
+--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
++++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+@@ -72,6 +72,11 @@
+ 			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+ 		};
+ 	};
++
++	wifi_pwrseq: wifi_pwrseq {
++		compatible = "mmc-pwrseq-simple";
++		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
++	};
+ };
+ 
+ &mmc0 {
+@@ -84,6 +89,25 @@
+ 	status = "okay";
+ };
+ 
++&mmc1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc1_pins_a>;
++	vmmc-supply = <&reg_vcc3v3>;
++	vqmmc-supply = <&reg_vcc3v3>;
++	mmc-pwrseq = <&wifi_pwrseq>;
++	bus-width = <4>;
++	non-removable;
++	status = "okay";
++
++	brcmf: bcrmf@1 {
++		reg = <1>;
++		compatible = "brcm,bcm4329-fmac";
++		interrupt-parent = <&pio>;
++		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
++		interrupt-names = "host-wake";
++	};
++};
++
+ &uart0 {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&uart0_pins_a>;
+-- 
+2.11.0
+

recipes-kernel/linux/linux-mainline/aarch64/defconfig

@@ -0,0 +1,607 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_AUDIT=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_NUMA_BALANCING=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_BLK_CGROUP=y
+CONFIG_CGROUP_PIDS=y
+CONFIG_CGROUP_HUGETLB=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_CGROUP_PERF=y
+CONFIG_USER_NS=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_PROFILING=y
+CONFIG_JUMP_LABEL=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_IOSCHED_DEADLINE is not set
+CONFIG_ARCH_SUNXI=y
+CONFIG_ARCH_ALPINE=y
+CONFIG_ARCH_BCM2835=y
+CONFIG_ARCH_BCM_IPROC=y
+CONFIG_ARCH_BERLIN=y
+CONFIG_ARCH_BRCMSTB=y
+CONFIG_ARCH_EXYNOS=y
+CONFIG_ARCH_LAYERSCAPE=y
+CONFIG_ARCH_LG1K=y
+CONFIG_ARCH_HISI=y
+CONFIG_ARCH_MEDIATEK=y
+CONFIG_ARCH_MESON=y
+CONFIG_ARCH_MVEBU=y
+CONFIG_ARCH_QCOM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_ARCH_SEATTLE=y
+CONFIG_ARCH_RENESAS=y
+CONFIG_ARCH_R8A7795=y
+CONFIG_ARCH_R8A7796=y
+CONFIG_ARCH_STRATIX10=y
+CONFIG_ARCH_TEGRA=y
+CONFIG_ARCH_SPRD=y
+CONFIG_ARCH_THUNDER=y
+CONFIG_ARCH_THUNDER2=y
+CONFIG_ARCH_UNIPHIER=y
+CONFIG_ARCH_VEXPRESS=y
+CONFIG_ARCH_XGENE=y
+CONFIG_ARCH_ZX=y
+CONFIG_ARCH_ZYNQMP=y
+CONFIG_PCI=y
+CONFIG_HOTPLUG_PCI_PCIE=y
+CONFIG_PCI_IOV=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_HOTPLUG_PCI_ACPI=y
+CONFIG_PCI_LAYERSCAPE=y
+CONFIG_PCI_HISI=y
+CONFIG_PCIE_QCOM=y
+CONFIG_PCIE_KIRIN=y
+CONFIG_PCIE_ARMADA_8K=y
+CONFIG_PCI_AARDVARK=y
+CONFIG_PCIE_RCAR=y
+CONFIG_PCIE_ROCKCHIP=m
+CONFIG_PCI_HOST_GENERIC=y
+CONFIG_PCI_XGENE=y
+CONFIG_ARM64_VA_BITS_48=y
+CONFIG_SCHED_MC=y
+CONFIG_NUMA=y
+CONFIG_PREEMPT=y
+CONFIG_KSM=y
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_CMA=y
+CONFIG_SECCOMP=y
+CONFIG_KEXEC=y
+CONFIG_CRASH_DUMP=y
+CONFIG_XEN=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_COMPAT=y
+CONFIG_HIBERNATION=y
+CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
+CONFIG_ARM_CPUIDLE=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPUFREQ_DT=y
+CONFIG_ARM_BIG_LITTLE_CPUFREQ=y
+CONFIG_ARM_SCPI_CPUFREQ=y
+CONFIG_ACPI_CPPC_CPUFREQ=m
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IPV6=m
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_NAT=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_VLAN_FILTERING=y
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_VLAN_8021Q_MVRP=y
+CONFIG_BPF_JIT=y
+CONFIG_BT=m
+CONFIG_BT_HIDP=m
+# CONFIG_BT_HS is not set
+# CONFIG_BT_LE is not set
+CONFIG_BT_LEDS=y
+# CONFIG_BT_DEBUGFS is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_LL=y
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
+CONFIG_MAC80211_LEDS=y
+CONFIG_RFKILL=m
+CONFIG_NET_9P=y
+CONFIG_NET_9P_VIRTIO=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_DMA_CMA=y
+CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_DENALI_DT=y
+CONFIG_MTD_SPI_NOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=m
+CONFIG_VIRTIO_BLK=y
+CONFIG_BLK_DEV_NVME=m
+CONFIG_SRAM=y
+CONFIG_EEPROM_AT25=m
+# CONFIG_SCSI_PROC_FS is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_SAS_ATA=y
+CONFIG_SCSI_HISI_SAS=y
+CONFIG_SCSI_HISI_SAS_PCI=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_AHCI_CEVA=y
+CONFIG_AHCI_MVEBU=y
+CONFIG_AHCI_XGENE=y
+CONFIG_AHCI_QORIQ=y
+CONFIG_SATA_SIL24=y
+CONFIG_SATA_RCAR=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_PATA_OF_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_TUN=y
+CONFIG_VETH=m
+CONFIG_VIRTIO_NET=y
+CONFIG_AMD_XGBE=y
+CONFIG_NET_XGENE=y
+CONFIG_MACB=y
+CONFIG_HNS_DSAF=y
+CONFIG_HNS_ENET=y
+CONFIG_E1000E=y
+CONFIG_IGB=y
+CONFIG_IGBVF=y
+CONFIG_MVNETA=y
+CONFIG_MVPP2=y
+CONFIG_SKY2=y
+CONFIG_QCOM_EMAC=m
+CONFIG_RAVB=y
+CONFIG_SMC91X=y
+CONFIG_SMSC911X=y
+CONFIG_STMMAC_ETH=m
+CONFIG_MDIO_BUS_MUX_MMIOREG=y
+CONFIG_AT803X_PHY=m
+CONFIG_MARVELL_PHY=m
+CONFIG_MESON_GXL_PHY=m
+CONFIG_MICREL_PHY=y
+CONFIG_REALTEK_PHY=m
+CONFIG_ROCKCHIP_PHY=y
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_RTL8152=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SR9800=m
+CONFIG_USB_NET_SMSC75XX=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_BRCMFMAC=m
+CONFIG_WL18XX=m
+CONFIG_WLCORE_SDIO=m
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_ADC=m
+CONFIG_KEYBOARD_CROS_EC=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_PM8941_PWRKEY=y
+CONFIG_INPUT_HISI_POWERKEY=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_BCM2835AUX=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_8250_MT6577=y
+CONFIG_SERIAL_8250_UNIPHIER=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_MESON=y
+CONFIG_SERIAL_MESON_CONSOLE=y
+CONFIG_SERIAL_SAMSUNG=y
+CONFIG_SERIAL_SAMSUNG_CONSOLE=y
+CONFIG_SERIAL_TEGRA=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=11
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_SERIAL_MSM=y
+CONFIG_SERIAL_MSM_CONSOLE=y
+CONFIG_SERIAL_XILINX_PS_UART=y
+CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
+CONFIG_SERIAL_MVEBU_UART=y
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_MUX_PCA954x=y
+CONFIG_I2C_BCM2835=m
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_I2C_IMX=y
+CONFIG_I2C_MESON=y
+CONFIG_I2C_MV64XXX=y
+CONFIG_I2C_PXA=y
+CONFIG_I2C_QUP=y
+CONFIG_I2C_RK3X=y
+CONFIG_I2C_SH_MOBILE=y
+CONFIG_I2C_TEGRA=y
+CONFIG_I2C_UNIPHIER_F=y
+CONFIG_I2C_RCAR=y
+CONFIG_I2C_CROS_EC_TUNNEL=y
+CONFIG_SPI=y
+CONFIG_SPI_MESON_SPICC=m
+CONFIG_SPI_MESON_SPIFC=m
+CONFIG_SPI_BCM2835=m
+CONFIG_SPI_BCM2835AUX=m
+CONFIG_SPI_ORION=y
+CONFIG_SPI_PL022=y
+CONFIG_SPI_QUP=y
+CONFIG_SPI_ROCKCHIP=y
+CONFIG_SPI_S3C64XX=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_SPMI=y
+CONFIG_PINCTRL_IPQ8074=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_PINCTRL_MAX77620=y
+CONFIG_PINCTRL_MSM8916=y
+CONFIG_PINCTRL_MSM8994=y
+CONFIG_PINCTRL_MSM8996=y
+CONFIG_PINCTRL_QDF2XXX=y
+CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
+CONFIG_GPIO_DWAPB=y
+CONFIG_GPIO_PL061=y
+CONFIG_GPIO_RCAR=y
+CONFIG_GPIO_XGENE=y
+CONFIG_GPIO_XGENE_SB=y
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCA953X_IRQ=y
+CONFIG_GPIO_MAX77620=y
+CONFIG_POWER_RESET_MSM=y
+CONFIG_POWER_RESET_XGENE=y
+CONFIG_POWER_RESET_SYSCON=y
+CONFIG_SYSCON_REBOOT_MODE=y
+CONFIG_BATTERY_BQ27XXX=y
+CONFIG_SENSORS_ARM_SCPI=y
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_INA2XX=m
+CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
+CONFIG_CPU_THERMAL=y
+CONFIG_THERMAL_EMULATION=y
+CONFIG_BRCMSTB_THERMAL=m
+CONFIG_EXYNOS_THERMAL=y
+CONFIG_ROCKCHIP_THERMAL=m
+CONFIG_WATCHDOG=y
+CONFIG_S3C2410_WATCHDOG=y
+CONFIG_MESON_GXBB_WATCHDOG=m
+CONFIG_MESON_WATCHDOG=m
+CONFIG_RENESAS_WDT=y
+CONFIG_UNIPHIER_WATCHDOG=y
+CONFIG_BCM2835_WDT=y
+CONFIG_MFD_AXP20X_RSB=y
+CONFIG_MFD_CROS_EC=y
+CONFIG_MFD_CROS_EC_I2C=y
+CONFIG_MFD_CROS_EC_SPI=y
+CONFIG_MFD_EXYNOS_LPASS=m
+CONFIG_MFD_HI6421_PMIC=y
+CONFIG_MFD_HI655X_PMIC=y
+CONFIG_MFD_MAX77620=y
+CONFIG_MFD_SPMI_PMIC=y
+CONFIG_MFD_RK808=y
+CONFIG_MFD_SEC_CORE=y
+CONFIG_REGULATOR_AXP20X=y
+CONFIG_REGULATOR_FAN53555=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_HI6421V530=y
+CONFIG_REGULATOR_HI655X=y
+CONFIG_REGULATOR_MAX77620=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_REGULATOR_QCOM_SMD_RPM=y
+CONFIG_REGULATOR_QCOM_SPMI=y
+CONFIG_REGULATOR_RK808=y
+CONFIG_REGULATOR_S2MPS11=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
+CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_MEDIA_RC_SUPPORT=y
+CONFIG_RC_CORE=m
+CONFIG_RC_DEVICES=y
+CONFIG_RC_DECODERS=y
+CONFIG_IR_MESON=m
+CONFIG_VIDEO_V4L2_SUBDEV_API=y
+# CONFIG_DVB_NET is not set
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
+CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
+CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
+CONFIG_VIDEO_RENESAS_FCP=m
+CONFIG_VIDEO_RENESAS_VSP1=m
+CONFIG_DRM=m
+CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_EXYNOS=m
+CONFIG_DRM_EXYNOS5433_DECON=y
+CONFIG_DRM_EXYNOS7_DECON=y
+CONFIG_DRM_EXYNOS_DSI=y
+# CONFIG_DRM_EXYNOS_DP is not set
+CONFIG_DRM_EXYNOS_HDMI=y
+CONFIG_DRM_EXYNOS_MIC=y
+CONFIG_DRM_ROCKCHIP=m
+CONFIG_ROCKCHIP_ANALOGIX_DP=y
+CONFIG_ROCKCHIP_CDN_DP=y
+CONFIG_ROCKCHIP_DW_HDMI=y
+CONFIG_ROCKCHIP_DW_MIPI_DSI=y
+CONFIG_ROCKCHIP_INNO_HDMI=y
+CONFIG_DRM_RCAR_DU=m
+CONFIG_DRM_RCAR_LVDS=y
+CONFIG_DRM_RCAR_VSP=y
+CONFIG_DRM_TEGRA=m
+CONFIG_DRM_PANEL_SIMPLE=m
+CONFIG_DRM_I2C_ADV7511=m
+CONFIG_DRM_VC4=m
+CONFIG_DRM_HISI_KIRIN=m
+CONFIG_DRM_MESON=m
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_BACKLIGHT_GENERIC=m
+CONFIG_BACKLIGHT_PWM=m
+CONFIG_BACKLIGHT_LP855X=m
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_BCM2835_SOC_I2S=m
+CONFIG_SND_SOC_SAMSUNG=y
+CONFIG_SND_SOC_RCAR=m
+CONFIG_SND_SOC_AK4613=m
+CONFIG_SND_SIMPLE_CARD=y
+CONFIG_USB=y
+CONFIG_USB_OTG=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_TEGRA=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MSM=y
+CONFIG_USB_EHCI_EXYNOS=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_EXYNOS=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_RENESAS_USBHS=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_ISP1760=y
+CONFIG_USB_HSIC_USB3503=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_MSM_OTG=y
+CONFIG_USB_QCOM_8X16_PHY=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_RENESAS_USBHS_UDC=m
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK_MINORS=32
+CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ACPI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_ARASAN=y
+CONFIG_MMC_SDHCI_OF_ESDHC=y
+CONFIG_MMC_SDHCI_CADENCE=y
+CONFIG_MMC_SDHCI_TEGRA=y
+CONFIG_MMC_MESON_GX=y
+CONFIG_MMC_SDHCI_MSM=y
+CONFIG_MMC_SPI=y
+CONFIG_MMC_SDHI=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_EXYNOS=y
+CONFIG_MMC_DW_K3=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_MMC_SUNXI=y
+CONFIG_MMC_BCM2835=y
+CONFIG_MMC_SDHCI_XENON=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
+CONFIG_LEDS_SYSCON=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_EDAC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_MAX77686=y
+CONFIG_RTC_DRV_RK808=m
+CONFIG_RTC_DRV_S5M=y
+CONFIG_RTC_DRV_DS3232=y
+CONFIG_RTC_DRV_EFI=y
+CONFIG_RTC_DRV_S3C=y
+CONFIG_RTC_DRV_PL031=y
+CONFIG_RTC_DRV_SUN6I=y
+CONFIG_RTC_DRV_TEGRA=y
+CONFIG_RTC_DRV_XGENE=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_BCM2835=m
+CONFIG_K3_DMA=y
+CONFIG_MV_XOR_V2=y
+CONFIG_PL330_DMA=y
+CONFIG_TEGRA20_APB_DMA=y
+CONFIG_QCOM_BAM_DMA=y
+CONFIG_QCOM_HIDMA_MGMT=y
+CONFIG_QCOM_HIDMA=y
+CONFIG_RCAR_DMAC=y
+CONFIG_VFIO=y
+CONFIG_VFIO_PCI=y
+CONFIG_VIRTIO_PCI=y
+CONFIG_VIRTIO_BALLOON=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_XEN_GNTDEV=y
+CONFIG_XEN_GRANT_DEV_ALLOC=y
+CONFIG_COMMON_CLK_RK808=y
+CONFIG_COMMON_CLK_SCPI=y
+CONFIG_COMMON_CLK_CS2000_CP=y
+CONFIG_COMMON_CLK_S2MPS11=y
+CONFIG_CLK_QORIQ=y
+CONFIG_COMMON_CLK_PWM=y
+CONFIG_COMMON_CLK_QCOM=y
+CONFIG_QCOM_CLK_SMD_RPM=y
+CONFIG_IPQ_GCC_8074=y
+CONFIG_MSM_GCC_8916=y
+CONFIG_MSM_GCC_8994=y
+CONFIG_MSM_MMCC_8996=y
+CONFIG_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_QCOM=y
+CONFIG_ARM_MHU=y
+CONFIG_PLATFORM_MHU=y
+CONFIG_BCM2835_MBOX=y
+CONFIG_HI6220_MBOX=y
+CONFIG_ROCKCHIP_IOMMU=y
+CONFIG_ARM_SMMU=y
+CONFIG_ARM_SMMU_V3=y
+CONFIG_RPMSG_QCOM_SMD=y
+CONFIG_RASPBERRYPI_POWER=y
+CONFIG_QCOM_SMEM=y
+CONFIG_QCOM_SMD_RPM=y
+CONFIG_QCOM_SMP2P=y
+CONFIG_QCOM_SMSM=y
+CONFIG_ROCKCHIP_PM_DOMAINS=y
+CONFIG_ARCH_TEGRA_132_SOC=y
+CONFIG_ARCH_TEGRA_210_SOC=y
+CONFIG_ARCH_TEGRA_186_SOC=y
+CONFIG_EXTCON_USB_GPIO=y
+CONFIG_IIO=y
+CONFIG_EXYNOS_ADC=y
+CONFIG_ROCKCHIP_SARADC=m
+CONFIG_PWM=y
+CONFIG_PWM_BCM2835=m
+CONFIG_PWM_CROS_EC=m
+CONFIG_PWM_MESON=m
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_PWM_SAMSUNG=y
+CONFIG_PWM_TEGRA=m
+CONFIG_PHY_RCAR_GEN3_USB2=y
+CONFIG_PHY_HI6220_USB=y
+CONFIG_PHY_SUN4I_USB=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_EMMC=y
+CONFIG_PHY_ROCKCHIP_PCIE=m
+CONFIG_PHY_XGENE=y
+CONFIG_PHY_TEGRA_XUSB=y
+CONFIG_QCOM_L2_PMU=y
+CONFIG_QCOM_L3_PMU=y
+CONFIG_TEE=y
+CONFIG_OPTEE=y
+CONFIG_ARM_SCPI_PROTOCOL=y
+CONFIG_RASPBERRYPI_FIRMWARE=y
+CONFIG_EFI_CAPSULE_LOADER=y
+CONFIG_ACPI=y
+CONFIG_ACPI_APEI=y
+CONFIG_ACPI_APEI_GHES=y
+CONFIG_ACPI_APEI_PCIEAER=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS_POSIX_ACL=y
+CONFIG_FANOTIFY=y
+CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
+CONFIG_QUOTA=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+CONFIG_OVERLAY_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_HUGETLBFS=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_EFIVAR_FS=y
+CONFIG_SQUASHFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_NFS_V4_2=y
+CONFIG_ROOT_NFS=y
+CONFIG_9P_FS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOCKUP_DETECTOR=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
+CONFIG_MEMTEST=y
+CONFIG_SECURITY=y
+CONFIG_CRYPTO_ECHAINIV=y
+CONFIG_CRYPTO_ANSI_CPRNG=y
+CONFIG_ARM64_CRYPTO=y
+CONFIG_CRYPTO_SHA256_ARM64=m
+CONFIG_CRYPTO_SHA512_ARM64=m
+CONFIG_CRYPTO_SHA1_ARM64_CE=y
+CONFIG_CRYPTO_SHA2_ARM64_CE=y
+CONFIG_CRYPTO_GHASH_ARM64_CE=y
+CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m
+CONFIG_CRYPTO_CRC32_ARM64_CE=m
+CONFIG_CRYPTO_AES_ARM64=m
+CONFIG_CRYPTO_AES_ARM64_CE=m
+CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
+CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
+CONFIG_CRYPTO_AES_ARM64_NEON_BLK=m
+CONFIG_CRYPTO_CHACHA20_NEON=m
+CONFIG_CRYPTO_AES_ARM64_BS=m

recipes-kernel/linux/linux-mainline_4.14.15.bb

@@ -0,0 +1,30 @@
+SECTION = "kernel"
+DESCRIPTION = "Mainline Linux kernel"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
+
+inherit kernel
+
+require linux.inc
+
+# Since we're not using git, this doesn't make a difference, but we need to fill
+# in something or kernel-yocto.bbclass will fail.
+KBRANCH ?= "master"
+
+# Pull in the devicetree files into the rootfs
+RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"
+
+KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
+
+S = "${WORKDIR}/linux-${PV}"
+	
+SRC_URI[md5sum] = "e1051f6b15d6399a5de2441dd4e15537"
+SRC_URI[sha256sum] = "ffc393a0c66f80375eacd3fb177b92e5c9daa07de0dcf947e925e049352e6142"
+
+SRC_URI = "https://www.kernel.org/pub/linux/kernel/v4.x/linux-${PV}.tar.xz \
+        file://0001-arm64-dts-orange-pi-zero-plus2-fix-sdcard-detect.patch \
+        file://0002-arm64-dts-orange-pi-zero-plus2-enable-AP6212a-WiFi-B.patch \
+        file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
+        file://defconfig \
+        "

recipes-kernel/linux/linux-mainline_git.bb

@@ -6,11 +6,12 @@ COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i)"
 
 inherit kernel
 
-require recipes-kernel/linux/linux-dtb.inc
 require linux.inc
 
+KBRANCH ?= "master"
+
 # Pull in the devicetree files into the rootfs
-RDEPENDS_kernel-base += "kernel-devicetree"
+RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"
 
 # Default is to use stable kernel version
 # If you want to use latest git version set to "1"
@@ -18,9 +19,9 @@ DEFAULT_PREFERENCE = "-1"
 
 KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
 	
-# 4.11.0-rc5
-PV = "4.11.0+git${SRCPV}"
-SRCREV_pn-${PN} = "81d4bab4ce87228c37ab14a885438544af5c9ce6"
+# 4.15-rc1
+PV = "4.15+git${SRCPV}"
+SRCREV_pn-${PN} = "4fbd8d194f06c8a3fd2af1ce560ddb31f7ec8323"
 
 SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git;protocol=git;branch=master \
         file://defconfig \

recipes-kernel/linux/linux.inc

@@ -5,7 +5,7 @@ LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
 
 INC_PR = "r0"
 
-inherit kernel siteinfo
+inherit kernel kernel-yocto siteinfo
 
 # Enable OABI compat for people stuck with obsolete userspace
 ARM_KEEP_OABI ?= "0"
@@ -22,6 +22,8 @@ LOGO_SIZE ?= '${@base_conditional("MACHINE_GUI_CLASS", "bigscreen", "vga", "qvga
 # accordingly.
 
 LOCALVERSION ?= ""
+KCONFIG_MODE ?= "alldefconfig"
+KMACHINE ?= "${MACHINE}"
 
 #kernel_conf_variable CMDLINE "\"${CMDLINE} ${CMDLINE_DEBUG}\""
 kernel_conf_variable() {
@@ -35,7 +37,6 @@ kernel_conf_variable() {
 }
 
 do_configure_prepend() {
-    echo "" > ${B}/.config
     CONF_SED_SCRIPT=""
 
     #
@@ -111,9 +112,6 @@ do_configure_prepend() {
         kernel_conf_variable CMDLINE \"${CMDLINE_NFSROOT_USB} ${CMDLINE_DEBUG}\"
     fi
 
-    sed -e "${CONF_SED_SCRIPT}" \
-    < '${WORKDIR}/defconfig' >>'${B}/.config'
-
     yes '' | oe_runmake -C ${S} O=${B} oldconfig
 }
 

recipes-kernel/linux/linux_4.4.40.bb

@@ -1,24 +0,0 @@
-SECTION = "kernel"
-DESCRIPTION = "Mainline Linux kernel"
-LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
-COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
-
-inherit kernel
-
-require recipes-kernel/linux/linux-dtb.inc
-require linux.inc
-
-# Pull in the devicetree files into the rootfs
-RDEPENDS_kernel-base += "kernel-devicetree"
-
-KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
-
-S = "${WORKDIR}/linux-${PV}"
-	
-SRC_URI[md5sum] = "2944984c89c272115649c4a08b43f8d0"
-SRC_URI[sha256sum] = "c4bc5ed6e73ed7393cc1b3714b822664224ab866db114eed663de1315718a4e1"
-
-SRC_URI = "https://www.kernel.org/pub/linux/kernel/v4.x/linux-${PV}.tar.xz \
-        file://defconfig \
-        "

recipes-kernel/linux/linux_4.9.20.bb

@@ -1,25 +0,0 @@
-SECTION = "kernel"
-DESCRIPTION = "Mainline Linux kernel"
-LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
-COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
-
-inherit kernel
-
-require recipes-kernel/linux/linux-dtb.inc
-require linux.inc
-
-# Pull in the devicetree files into the rootfs
-RDEPENDS_kernel-base += "kernel-devicetree"
-
-KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
-
-S = "${WORKDIR}/linux-${PV}"
-	
-SRC_URI[md5sum] = "f824815a579334f76b85b2c79893ceb4"
-SRC_URI[sha256sum] = "48660806dd32fb8dcbcf5932291bf6cc7d29240070372230871e0f56fea81341"
-
-SRC_URI = "https://www.kernel.org/pub/linux/kernel/v4.x/linux-${PV}.tar.xz \
-        file://defconfig \
-        file://0001-ARM-dts-sunxi-Change-node-name-for-pwrseq-pin-on-Oli.patch \
-        "