Merge pull request #162 from xpete/krogoth

added a20som support to pyA20

README.md

@@ -3,9 +3,9 @@ meta-sunxi
 
 Official sunxi OpenEmbedded layer for Allwinner-based boards.
 
-This layer depends on the additional layers:
+This layer depends on the additional layer:
 
-* [meta-openembedded/meta-oe](http://git.openembedded.org/meta-openembedded/tree/meta-oe)
+meta-openembedded: git://git.openembedded.org/meta-openembedded
 
 Tested with core-image-base.
 
@@ -14,46 +14,30 @@ Maintainers:
 * Nicolas Aguirre <aguirre.nicolas@gmail.com>
 * Enrico Butera <ebutera@users.sourceforge.net>
 * Sergey Lapin <slapin@ossfans.org>
-* Marek Belisko <marek.belisko@gmail.com>
-
-Community
-===========
-
-You can reach community + ask your question on gitter: https://matrix.to/#/#meta-sunxi:gitter.im
 
 Kernel / U-Boot Version
 ===========
 Most Allwinner devices and hardware are supported in mainline kernel and U-Boot, so this layer builds mainline by default.
-
-Legacy sunxi Kernel / U-Boot
------------
-
 There is a custom U-Boot and Kernel version for sunxi devices which includes some special drivers not mainlined.
-These versions are rather old (3.4 for kernel and 2014.04 for U-Boot), but may support more functions and devices than current mainline.
+These versions are rather old (3.4 for kernel and 2014.04 for U-Boot), but may support more functions and devices than current mainline 
 
 If you want to switch back to sunxi versions for some reasons (no device tree available, unsupported hardware), either:
 - change the file conf/machine/include/sunxi.inc to include the following block
 - edit your conf/local.conf to add the following block
 
-		PREFERRED_PROVIDER_u-boot="u-boot-sunxi"
-		PREFERRED_PROVIDER_virtual/bootloader="u-boot-sunxi"
-		PREFERRED_PROVIDER_virtual/kernel="linux-sunxi"
-		KERNEL_DEVICETREE = ""
+	PREFERRED_PROVIDER_u-boot="u-boot-sunxi"
+	PREFERRED_PROVIDER_virtual/bootloader="u-boot-sunxi"
+	PREFERRED_PROVIDER_virtual/kernel="linux-sunxi"
 
 If you already have built the mainline versions it might be necessary to reset the build directories with:
 
-	bitbake -c clean virtual/kernel virtual/bootloader
+	bitbake -c clean linux
+	bitbake -c clean u-boot
 
-Mainline Kernel / U-Boot
------------
+Also, older kernel versions such as this don't build successfully with any gcc version 5.0 or newer. Since gcc-5.2 is the current
+default compiler on master, if you wish to build this kernel with master you'll need to add the following to your conf/local.conf:
 
-For mainline kernel we have now support for latest LTS and stable.
-By default we use latest LTS. If you would like to change version please update ```PREFERRED_VERSION_linux-mainline``` in:
-* [conf/machine/include/sunxi.inc](https://github.com/linux-sunxi/meta-sunxi/blob/fa0846c0eb23e3424b89acb4d5a327e921f73497/conf/machine/include/sunxi.inc#L16)
-
-When using mainline kernel ≥ 5.2 it is now possible to use the mainline graphics drivers *lima* and *panfrost*, instead of the *mali* driver provided by ARM. To enable open source mainline graphics support add the following line in your `local.conf`:
-
-    MACHINEOVERRIDES .= ":use-mailine-graphics"
+	GCCVERSION = "4.9%"
 
 Performance
 ===========

classes/sdcard_image-sunxi.bbclass

@@ -0,0 +1,114 @@
+inherit image_types
+
+#
+# Create an image that can by written onto a SD card using dd.
+# Originally written for rasberrypi adapt for the needs of allwinner sunxi based boards
+#
+# The disk layout used is:
+#
+#    0                      -> 8*1024                           - reserverd
+#    8*1024                 -> 32*1024                          - 
+#    32*1024                -> 2048*1024                        - 
+#    2048*1024              -> BOOT_SPACE                       - bootloader and kernel
+#
+#
+
+# This image depends on the rootfs image
+IMAGE_TYPEDEP_sunxi-sdimg = "${SDIMG_ROOTFS_TYPE}"
+
+# Boot partition volume id
+BOOTDD_VOLUME_ID ?= "${MACHINE}"
+
+# Boot partition size [in KiB]
+BOOT_SPACE ?= "20480"
+
+# First partition begin at sector 2048 : 2048*1024 = 2097152
+IMAGE_ROOTFS_ALIGNMENT = "2048"
+
+# Use an uncompressed ext3 by default as rootfs
+SDIMG_ROOTFS_TYPE ?= "ext4"
+SDIMG_ROOTFS = "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.${SDIMG_ROOTFS_TYPE}"
+
+IMAGE_DEPENDS_sunxi-sdimg += " \
+			parted-native \
+			mtools-native \
+			dosfstools-native \
+			virtual/kernel \
+			virtual/bootloader \
+			"
+
+rootfs[depends] += "virtual/kernel:do_deploy"
+
+# SD card image name
+SDIMG = "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.sunxi-sdimg"
+
+IMAGEDATESTAMP = "${@time.strftime('%Y.%m.%d',time.gmtime())}"
+
+IMAGE_CMD_sunxi-sdimg () {
+
+	# Align partitions
+	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
+	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT})
+	SDIMG_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $ROOTFS_SIZE + ${IMAGE_ROOTFS_ALIGNMENT})
+
+	# Initialize sdcard image file
+	dd if=/dev/zero of=${SDIMG} bs=1 count=0 seek=$(expr 1024 \* ${SDIMG_SIZE})
+
+	# Create partition table
+	parted -s ${SDIMG} mklabel msdos
+	# Create boot partition and mark it as bootable
+	parted -s ${SDIMG} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT})
+	parted -s ${SDIMG} set 1 boot on
+	# Create rootfs partition
+	parted -s ${SDIMG} unit KiB mkpart primary ext2 $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT}) $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT} \+ ${ROOTFS_SIZE})
+	parted ${SDIMG} print
+
+	# Create a vfat image with boot files
+	BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }')
+	rm -f ${WORKDIR}/boot.img
+	mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
+
+	mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::uImage
+
+	# Copy device tree file
+	if test -n "${KERNEL_DEVICETREE}"; then
+		for DTS_FILE in ${KERNEL_DEVICETREE}; do
+			DTS_BASE_NAME=`basename ${DTS_FILE} | awk -F "." '{print $1}'`
+			if [ -e "${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb" ]; then
+				kernel_bin="`readlink ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin`"
+				kernel_bin_for_dtb="`readlink ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb | sed "s,$DTS_BASE_NAME,${MACHINE},g;s,\.dtb$,.bin,g"`"
+				if [ $kernel_bin = $kernel_bin_for_dtb ]; then
+					mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb ::/${DTS_BASE_NAME}.dtb
+				fi
+			fi
+		done
+	fi
+
+	if [ -e "${DEPLOY_DIR_IMAGE}/fex.bin" ]
+	then
+		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/fex.bin ::script.bin
+	fi
+	if [ -e "${DEPLOY_DIR_IMAGE}/boot.scr" ]
+	then
+		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/boot.scr ::boot.scr
+	fi
+
+
+	# Add stamp file
+	echo "${IMAGE_NAME}-${IMAGEDATESTAMP}" > ${WORKDIR}/image-version-info
+	mcopy -i ${WORKDIR}/boot.img -v ${WORKDIR}//image-version-info ::
+
+	# Burn Partitions
+	dd if=${WORKDIR}/boot.img of=${SDIMG} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
+	# If SDIMG_ROOTFS_TYPE is a .xz file use xzcat
+	if echo "${SDIMG_ROOTFS_TYPE}" | egrep -q "*\.xz"
+	then
+		xzcat ${SDIMG_ROOTFS} | dd of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
+	else
+		dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
+	fi
+
+	#write u-boot and spl at the beginint of sdcard in one shot
+	dd if=${DEPLOY_DIR_IMAGE}/u-boot-sunxi-with-spl.bin of=${SDIMG} bs=1024 seek=8 conv=notrunc
+
+}

conf/layer.conf

@@ -4,14 +4,6 @@ BBPATH .= ":${LAYERDIR}"
 # We have a recipes directory, add to BBFILES
 BBFILES += "${LAYERDIR}/recipes*/*/*.bb ${LAYERDIR}/recipes*/*/*.bbappend"
 
-BBFILE_COLLECTIONS += "sunxi"
-BBFILE_PATTERN_sunxi := "^${LAYERDIR}/"
-BBFILE_PRIORITY_sunxi = "10"
-
-# This should only be incremented on significant changes that will
-# cause compatibility issues with other layers
-LAYERVERSION_sunxi = "1"
-
-LAYERDEPENDS_sunxi = "core meta-python"
-
-LAYERSERIES_COMPAT_sunxi = "honister kirkstone langdale mickledore"
+BBFILE_COLLECTIONS += "meta-sunxi"
+BBFILE_PATTERN_meta-sunxi := "^${LAYERDIR}/"
+BBFILE_PRIORITY_meta-sunxi = "10"

conf/machine/bananapi-m2-zero.conf

@@ -1,10 +0,0 @@
-#@TYPE: Machine
-#@NAME: bananapi-m2-zero
-#@DESCRIPTION: Machine configuration for the Banana Pi M2 Zero, base on Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-require conf/machine/include/hardware/ap6212a.inc
-
-KERNEL_DEVICETREE = "sun8i-h2-plus-bananapi-m2-zero.dtb"
-UBOOT_MACHINE = "bananapi_m2_zero_defconfig"
-

conf/machine/bananapi-m2m.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: bananapi-m2m
-#@DESCRIPTION: Machine configuration for the Banana Pi M2M, base on Allwinner H8 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-r16-bananapi-m2m.dtb"
-UBOOT_MACHINE = "Bananapi_m2m_defconfig"
-

conf/machine/bananapi-m2plus.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: bananapi-m2plus
-#@DESCRIPTION: Machine configuration for the Banana Pi M2+, base on Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-bananapi-m2-plus.dtb"
-UBOOT_MACHINE = "bananapi_m2_plus_h3_defconfig"
-

conf/machine/bananapi-m64.conf

@@ -1,8 +0,0 @@
-#@TYPE: Machine
-#@NAME: pine64-plus
-#@DESCRIPTION: Machine configuration for the pine64-plus, based on Allwinner A64 CPU
-
-require conf/machine/include/sun50i.inc
-
-KERNEL_DEVICETREE = "allwinner/sun50i-a64-bananapi-m64.dtb"
-UBOOT_MACHINE = "bananapi_m64_defconfig"

conf/machine/include/hardware/ap6212a.inc

@@ -1,5 +0,0 @@
-# Include for boards with AMPAK 6212A Wifi / Bluetooth module
-# https://linux-sunxi.org/Wifi#Ampak
-
-MACHINE_EXTRA_RRECOMMENDS:append = " kernel-module-brcmfmac"
-MACHINE_EXTRA_RDEPENDS:append = " linux-firmware-bcm43430"

conf/machine/include/sun4i.inc

@@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/arm/armv7a/tune-cortexa8.inc
+require conf/machine/include/tune-cortexa8.inc
 
 SOC_FAMILY = "sun4i"

conf/machine/include/sun50i-h616.inc

@@ -1,8 +0,0 @@
-require conf/machine/include/sunxi64.inc
-
-DEFAULTTUNE ?= "cortexa53-crypto"
-require conf/machine/include/arm/armv8a/tune-cortexa53.inc
-
-MACHINEOVERRIDES =. "sun50i:"
-
-SOC_FAMILY = "sun50i-h616"

conf/machine/include/sun50i.inc

@@ -1,6 +0,0 @@
-require conf/machine/include/sunxi64.inc
-
-DEFAULTTUNE ?= "cortexa53-crypto"
-require conf/machine/include/arm/armv8a/tune-cortexa53.inc
-
-SOC_FAMILY = "sun50i"

conf/machine/include/sun5i.inc

@@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/arm/armv7a/tune-cortexa8.inc
+require conf/machine/include/tune-cortexa8.inc
 
 SOC_FAMILY = "sun5i"

conf/machine/include/sun7i.inc

@@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/arm/armv7a/tune-cortexa7.inc
+require conf/machine/include/tune-cortexa7.inc
 
 SOC_FAMILY = "sun7i"

conf/machine/include/sun8i.inc

@@ -1,5 +0,0 @@
-require conf/machine/include/sunxi.inc
-require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/arm/armv7a/tune-cortexa7.inc
-
-SOC_FAMILY = "sun8i"

conf/machine/include/sunxi-mali-driver.inc

@@ -1,15 +0,0 @@
-PREFERRED_PROVIDER_virtual/mesa ?= "mesa-gl"
-PREFERRED_PROVIDER_virtual/libgl ?= "mesa-gl"
-PREFERRED_PROVIDER_virtual/libgles1 ?= "sunxi-mali"
-PREFERRED_PROVIDER_virtual/libgles2 ?= "sunxi-mali"
-PREFERRED_PROVIDER_virtual/egl ?= "sunxi-mali"
-
-PACKAGECONFIG:remove:pn-xserver-xorg = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'glamor', '', d)}"
-
-XSERVER += "sunxi-mali \
-            sunxi-mali-dev"
-
-MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "\
- kernel-module-mali \
- kernel-module-mali-drm \
-  "

conf/machine/include/sunxi-mali.inc

@@ -1,5 +1,13 @@
-# The "sunxi-mailine-graphics-drivers.inc" doesn't exist, but it can be created
-# in the future if needed.  Using include directive ensures build doesn't fail
-# if .inc file doesn't exist:
-# https://www.yoctoproject.org/pipermail/yocto/2019-August/046484.html
-include ${@'sunxi-mali-driver.inc' if 'use-mailine-graphics' not in d.getVar("MACHINEOVERRIDES").split(":") else 'sunxi-mailine-graphics-drivers.inc' }
+PREFERRED_PROVIDER_virtual/mesa ?= "mesa-gl"
+PREFERRED_PROVIDER_virtual/libgl ?= "mesa-gl"
+PREFERRED_PROVIDER_virtual/libgles1 ?= "sunxi-mali"
+PREFERRED_PROVIDER_virtual/libgles2 ?= "sunxi-mali"
+PREFERRED_PROVIDER_virtual/egl ?= "sunxi-mali"
+
+XSERVER += "sunxi-mali \
+            sunxi-mali-dev"
+
+MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "\
+ kernel-module-mali \
+ kernel-module-mali-drm \
+  "

conf/machine/include/sunxi.inc

@@ -1,47 +1,32 @@
 SOC_FAMILY ??= ""
 include conf/machine/include/soc-family.inc
 
-MACHINEOVERRIDES =. "sunxi:"
-
 # Sub-architecture support
 MACHINE_SOCARCH_SUFFIX ?= ""
 MACHINE_SOCARCH_SUFFIX_sun4i = "-sun4i"
 
 PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
 XSERVER = "xserver-xorg \
+           xf86-video-fbturbo \
            xf86-input-evdev \
            xf86-input-mouse \
            xf86-input-keyboard"
 
-PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
-PREFERRED_VERSION_linux-mainline ?= "6.1.%"
+PREFERRED_PROVIDER_virtual/kernel ?= "linux"
 PREFERRED_PROVIDER_u-boot ?= "u-boot"
 PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
 
 KERNEL_IMAGETYPE ?= "uImage"
 
-IMAGE_FSTYPES += "ext3 tar.gz wic.gz wic.bmap"
+IMAGE_CLASSES += "sdcard_image-sunxi"
+IMAGE_FSTYPES += "ext3 tar.gz sunxi-sdimg"
 
 MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"
 
 UBOOT_LOCALVERSION = "-g${@d.getVar('SRCPV', True).partition('+')[2][0:7]}"
 
 UBOOT_ENTRYPOINT ?= "0x40008000"
-
-SPL_BINARY ?= "u-boot-sunxi-with-spl.bin"
+UBOOT_LOADADDRESS ?= "0x400080OB00"
 
 SERIAL_CONSOLE ?= "115200 ttyS0"
 MACHINE_FEATURES ?= "alsa apm keyboard rtc serial screen usbgadget usbhost vfat"
-
-# Mimic the sdcard_image-sunxi.bbclass
-# image-version-info file was also generated and installed to boot partition,
-# but it is missing here - can be added somehow (how?) if required
-SUNXI_FEX_FILE ?= " "
-SUNXI_BOOT_SPACE ?= "40"
-IMAGE_BOOT_FILES ?= "${KERNEL_IMAGETYPE} boot.scr"
-# ship fex file for sunxi kernel, devicetree file for mainline kernel
-IMAGE_BOOT_FILES += "${@bb.utils.contains('PREFERRED_PROVIDER_virtual/kernel', 'linux-sunxi', '${SUNXI_FEX_FILE}', '${KERNEL_DEVICETREE}', d)}"
-WKS_FILES ?= "sunxi-sdcard-image.wks.in"
-WKS_FILE_DEPENDS ?= "virtual/kernel u-boot"
-# in case of sunxi kernel, sunxi-board-fex must be built prior wic image assembly
-WKS_FILE_DEPENDS += " ${@bb.utils.contains('PREFERRED_PROVIDER_virtual/kernel', 'linux-sunxi', 'sunxi-board-fex', '', d)}"

conf/machine/include/sunxi64.inc

@@ -1,51 +0,0 @@
-SOC_FAMILY ??= ""
-include conf/machine/include/soc-family.inc
-
-MACHINEOVERRIDES =. "sunxi:sunxi64:"
-
-PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
-PREFERRED_PROVIDER_u-boot ?= "u-boot"
-PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
-
-KERNEL_IMAGETYPE ?= "Image"
-
-IMAGE_FSTYPES += "ext4 tar.gz wic.gz wic.bmap"
-
-MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"
-
-UBOOT_LOCALVERSION = "-g${@d.getVar('SRCPV', True).partition('+')[2][0:7]}"
-
-UBOOT_ENTRYPOINT ?= "0x40008000"
-UBOOT_LOADADDRESS ?= "0x400080OB00"
-
-#UBOOT_BINARY ?= "u-boot.itb"
-SPL_BINARY ?= "u-boot-sunxi-with-spl.bin"
-
-SERIAL_CONSOLE ?= "115200 ttyS0"
-MACHINE_FEATURES ?= "alsa apm keyboard rtc serial screen usbgadget usbhost vfat"
-
-# arm64 dbts are under <vendor>/dts but is deployed under DEPLOYDIR 
-do_fix_device_tree_location() {
-
-    for kdt in ${KERNEL_DEVICETREE}
-    do
-        local dbt_dir=$(dirname ${kdt})
-        if [ "." != "${dbt_dir}" ] ; then
-            local dbt=$(basename ${kdt})
-            local dst=${DEPLOY_DIR_IMAGE}/${dbt_dir}/${dbt}
-            if [ ! -f ${dst} ] ; then
-                mkdir -p ${DEPLOY_DIR_IMAGE}/$dbt_dir
-                ln -s ${DEPLOY_DIR_IMAGE}/${dbt} ${dst}
-            fi
-        fi
-    done
-}
-
-
-addtask do_fix_device_tree_location after do_write_wks_template before do_image_wic
-
-SUNXI_BOOT_SPACE ?= "40"
-IMAGE_BOOT_FILES ?= "${KERNEL_IMAGETYPE} boot.scr ${KERNEL_DEVICETREE}"
-
-WKS_FILES ?= "sunxi-sdcard-image.wks.in"
-WKS_FILE_DEPENDS ?= "virtual/kernel u-boot"

conf/machine/licheepi-zero.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: licheepi-zero
-#@DESCRIPTION: Machine configuration for the licheepi-zero, based on allwinner V3s CPU
-
-require conf/machine/include/sun8i.inc
-
-
-UBOOT_MACHINE = "LicheePi_Zero_defconfig"
-KERNEL_DEVICETREE = "sun8i-v3s-licheepi-zero.dtb"

conf/machine/marsboard-a10.conf

@@ -1,10 +0,0 @@
-#@TYPE: Machine
-#@NAME: HAOYU Electronics MarsBoard A10
-#@DESCRIPTION: Machine configuration for the HAOYU Electronics MarsBoard A10, based on Allwinner A10 CPU
-#https://linux-sunxi.org/MarsBoard_A10
-
-require conf/machine/include/sun4i.inc
-
-KERNEL_DEVICETREE = "sun4i-a10-marsboard.dtb"
-UBOOT_MACHINE = "Marsboard_A10_config"
-SUNXI_FEX_FILE = "sys_config/a10/marsboard_a10.fex"

conf/machine/nanopi-m1-plus.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: nanopi M1 Plus
-#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo, based on the Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-nanopi-m1-plus.dtb"
-UBOOT_MACHINE = "nanopi_m1_plus_defconfig"
-

conf/machine/nanopi-m1.conf

@@ -1,8 +0,0 @@
-#@TYPE: Machine
-#@NAME: NanoPi M1
-#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo, based on #the Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-nanopi-m1.dtb"
-UBOOT_MACHINE = "nanopi_m1_defconfig"

conf/machine/nanopi-neo-air.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: nanopi-neo-air
-#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo Air, based
-# on the Allwinner H3 CPU.
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo-air.dtb"
-UBOOT_MACHINE = "nanopi_neo_air_defconfig"

conf/machine/nanopi-neo-plus2.conf

@@ -1,10 +0,0 @@
-#@TYPE: Machine
-#@NAME: nanopi-neo-plus2
-#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo Plus2, based
-# on the Allwinner H5 SoC.
-
-require conf/machine/include/sun50i.inc
-require conf/machine/include/hardware/ap6212a.inc
-
-KERNEL_DEVICETREE = "allwinner/sun50i-h5-nanopi-neo-plus2.dtb"
-UBOOT_MACHINE = "nanopi_neo_plus2_defconfig"

conf/machine/nanopi-neo.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: nanopi-neo
-#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo, based on the Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo.dtb"
-UBOOT_MACHINE = "nanopi_neo_defconfig"
-

conf/machine/nanopi-neo2.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: nanopi-neo2
-#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo 2, based on
-# the Allwinner H5 SoC.
-
-require conf/machine/include/sun50i.inc
-
-KERNEL_DEVICETREE = "allwinner/sun50i-h5-nanopi-neo2.dtb"
-UBOOT_MACHINE = "nanopi_neo2_defconfig"

conf/machine/nanopi-r1.conf

@@ -1,8 +0,0 @@
-#@TYPE: Machine
-#@NAME: NanoPi R1
-#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi R1, based on #the Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-nanopi-r1.dtb"
-UBOOT_MACHINE = "nanopi_r1_defconfig"

conf/machine/olinuxino-a13som.conf

@@ -5,5 +5,6 @@
 
 require conf/machine/include/sun5i.inc
 
-UBOOT_MACHINE = "OLIMEX-A13-SOM_config"
-SUNXI_FEX_FILE = "sys_config/a13/olimex_a13_som.fex"
+KERNEL_DEVICETREE = "sun5i-a13-olinuxino-micro.dtb"
+UBOOT_MACHINE = "A13-OLinuXinoM_defconfig"
+SUNXI_FEX_FILE = "sys_config/a13/a13-olinuxinom.fex"

conf/machine/olinuxino-a20lime2-emmc.conf

@@ -1,10 +0,0 @@
-#@TYPE: Machine
-#@NAME: Olimex A20-OLinuXino Lime2 Board with 4GB eMMC
-#@DESCRIPTION: Machine configuration for the Olimex A20-OLinuXino Lime2 Board with 4GB eMMC, based on Allwinner A20 CPU
-#https://github.com/OLIMEX/OLINUXINO
-
-require conf/machine/include/sun7i.inc
-
-KERNEL_DEVICETREE = "sun7i-a20-olinuxino-lime2-emmc.dtb"
-UBOOT_MACHINE = "A20-OLinuXino-Lime2-eMMC_config"
-SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_lime2.fex"

conf/machine/olinuxino-a64.conf

@@ -1,13 +0,0 @@
-#@TYPE: Machine
-#@NAME: Olimex A64-OLinuXino Board
-#@DESCRIPTION: Machine configuration for the Olimex A64-OLinuXino Board, based on Allwinner A64 CPU
-#https://github.com/OLIMEX/OLINUXINO
-
-require conf/machine/include/sun50i.inc
-
-PREFFERED_VERSION_u-boot = "v2018.09%"
-
-MACHINE_EXTRA_RRECOMMENDS += " linux-firmware-rtl8723"
-
-KERNEL_DEVICETREE = "allwinner/sun50i-a64-olinuxino.dtb"
-UBOOT_MACHINE = "a64-olinuxino_defconfig"

conf/machine/orange-pi-one-plus.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-one-plus
-#@DESCRIPTION: Machine configuration for the Orange Pi One Plus, based on Allwinner H6 CPU
-
-
-require conf/machine/include/sun50i.inc
-
-KERNEL_DEVICETREE = "allwinner/sun50i-h6-orangepi-one-plus.dtb"
-UBOOT_MACHINE = "orangepi_one_plus_defconfig"

conf/machine/orange-pi-one.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-one
-#@DESCRIPTION: Machine configuration for the orange-pi-one, base on allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-orangepi-one.dtb"
-UBOOT_MACHINE = "orangepi_one_defconfig"
-

conf/machine/orange-pi-pc-plus.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-pc-plus
-#@DESCRIPTION: Machine configuration for the orange-pi-pc-plus, base on allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc-plus.dtb"
-UBOOT_MACHINE = "orangepi_pc_plus_defconfig"
-

conf/machine/orange-pi-pc.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-one
-#@DESCRIPTION: Machine configuration for the orange-pi-one, base on allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc.dtb"
-UBOOT_MACHINE = "orangepi_pc_defconfig"
-

conf/machine/orange-pi-pc2.conf

@@ -1,8 +0,0 @@
-#@TYPE: Machine
-#@NAME: orangepi-pc2
-#@DESCRIPTION: Machine configuration for the orangepi-pc2, based on Allwinner A64 CPU
-
-require conf/machine/include/sun50i.inc
-
-KERNEL_DEVICETREE = "allwinner/sun50i-h5-orangepi-pc2.dtb"
-UBOOT_MACHINE = "orangepi_pc2_defconfig"

conf/machine/orange-pi-r1.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-r1
-#@DESCRIPTION: Machine configuration for the orange-pi-r1, base on allwinner H2+ CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h2-plus-orangepi-r1.dtb"
-UBOOT_MACHINE = "orangepi_r1_defconfig"
-

conf/machine/orange-pi-zero-plus2-h3.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-zero-plus2-h3
-#@DESCRIPTION: Machine configuration for the orange-pi-zero-plus2, based on Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-require conf/machine/include/hardware/ap6212a.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-orangepi-zero-plus2.dtb"
-UBOOT_MACHINE = "orangepi_zero_plus2_h3_defconfig"

conf/machine/orange-pi-zero-plus2.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-zero-plus2
-#@DESCRIPTION: Machine configuration for the orange-pi-zero-plus2, base on Allwinner H5 CPU
-
-require conf/machine/include/sun50i.inc
-require conf/machine/include/hardware/ap6212a.inc
-
-KERNEL_DEVICETREE = "allwinner/sun50i-h5-orangepi-zero-plus2.dtb"
-UBOOT_MACHINE = "orangepi_zero_plus2_defconfig"

conf/machine/orange-pi-zero.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-zero
-#@DESCRIPTION: Machine configuration for the orange-pi-zero, based on Allwinner H2 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h2-plus-orangepi-zero.dtb"
-UBOOT_MACHINE = "orangepi_zero_defconfig"
-

conf/machine/orange-pi-zero2.conf

@@ -1,16 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-zero-2
-#@DESCRIPTION: Machine configuration for the orange-pi-zero-2, based on Allwinner H616 CPU
-
-require conf/machine/include/sun50i-h616.inc
-
-KERNEL_DEVICETREE = "allwinner/sun50i-h616-orangepi-zero2.dtb"
-UBOOT_MACHINE = "orangepi_zero2_defconfig"
-
-SPL_BINARY = "u-boot-sunxi-with-spl.bin"
-
-# as for now neither graphics nor audio is supported
-MACHINE_FEATURES:remove = "alsa x11"
-MACHINE_FEATURES:append = "bluetooth wifi"
-
-MACHINE_EXTRA_RRECOMMENDS = "uwe5622-firmware"

conf/machine/pcduino3.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: Linksprite A20-pcduino3 Board
-#@DESCRIPTION: Machine configuration for the pcDuino 3, based on Allwinner A20 CPU
-
-require conf/machine/include/sun7i.inc
-
-KERNEL_DEVICETREE = "sun7i-a20-pcduino3.dtb"
-UBOOT_MACHINE = "Linksprite_pcDuino3_defconfig"
-SUNXI_FEX_FILE = "sys_config/a20/linksprite_pcduino3.fex"

conf/machine/pine64-plus.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: pine64-plus
-#@DESCRIPTION: Machine configuration for the pine64-plus, based on Allwinner A64 CPU
-
-
-require conf/machine/include/sun50i.inc
-
-KERNEL_DEVICETREE = "allwinner/sun50i-a64-pine64-plus.dtb"
-UBOOT_MACHINE = "pine64_plus_defconfig"

recipes-bsp/atf/atf-sunxi/0001-Use-same-type-as-in-declaration.patch

@@ -1,26 +0,0 @@
-From 087b9306659effac870b4794c0f775ce3d7208c5 Mon Sep 17 00:00:00 2001
-From: Marek Belisko <marek.belisko@open-nandra.com>
-Date: Wed, 13 Apr 2022 08:09:29 +0200
-Subject: [PATCH] Use same type as in declaration
-
-Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
----
- services/std_svc/psci/psci_common.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/services/std_svc/psci/psci_common.c b/services/std_svc/psci/psci_common.c
-index 75f52f538..918a719f6 100644
---- a/services/std_svc/psci/psci_common.c
-+++ b/services/std_svc/psci/psci_common.c
-@@ -261,7 +261,7 @@ void psci_acquire_afflvl_locks(int start_afflvl,
-  ******************************************************************************/
- void psci_release_afflvl_locks(int start_afflvl,
- 			       int end_afflvl,
--			       aff_map_node_t *mpidr_nodes[])
-+			       mpidr_aff_map_nodes_t mpidr_nodes)
- {
- 	int level;
- 
--- 
-2.25.1
-

recipes-bsp/atf/atf-sunxi/Makefile-link-with-z-noexecstack-no-warn-rwx-segment.patch

@@ -1,35 +0,0 @@
-From 69d2c1ccb42942980064c12d3ea3904bac450feb Mon Sep 17 00:00:00 2001
-From: pbiel <pbiel7@gmail.com>
-Date: Thu, 23 Feb 2023 16:30:01 +0100
-Subject: [PATCH] Makefile: link with -z noexecstack --no-warn-rwx-segments
-
----
- Makefile | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/Makefile b/Makefile
-index 578083221..e70888cf2 100644
---- a/Makefile
-+++ b/Makefile
-@@ -445,6 +445,8 @@ endif
- 
- GCC_V_OUTPUT		:=	$(shell $(CC) -v 2>&1)
- 
-+TF_LDFLAGS		+=	--no-warn-rwx-segment
-+
- # LD = armlink
- ifneq ($(findstring armlink,$(notdir $(LD))),)
- TF_LDFLAGS		+=	--diag_error=warning --lto_level=O1
-@@ -471,6 +473,9 @@ TF_LDFLAGS		+=	$(subst --,-Xlinker --,$(TF_LDFLAGS_$(ARCH)))
- 
- # LD = gcc-ld (ld) or llvm-ld (ld.lld) or other
- else
-+# With ld.bfd version 2.39 and newer new warnings are added. Skip those since we
-+# are not loaded by a elf loader.
-+TF_LDFLAGS		+=	$(call ld_option, --no-warn-rwx-segments)
- TF_LDFLAGS		+=	-O1
- TF_LDFLAGS		+=	--gc-sections
- # ld.lld doesn't recognize the errata flags,
--- 
-2.34.1
-

recipes-bsp/atf/atf-sunxi_git.bb

@@ -1,32 +0,0 @@
-DESCRIPTION = "ARM Trusted Firmware Allwinner"
-LICENSE = "BSD-3-Clause"
-LIC_FILES_CHKSUM = "file://docs/license.rst;md5=b2c740efedc159745b9b31f88ff03dde"
-
-SRC_URI = " \
-    git://github.com/ARM-software/arm-trusted-firmware;nobranch=1;protocol=https \
-    file://Makefile-link-with-z-noexecstack-no-warn-rwx-segment.patch \
-"
-
-SRCREV = "ba12668a65f9b10bc18f3b49a71999ed5d32714a"
-
-S = "${WORKDIR}/git"
-B = "${WORKDIR}/build"
-
-COMPATIBLE_MACHINE = "(sun50i|sun50i-h616)"
-
-PLATFORM:sun50i = "sun50i_a64"
-PLATFORM:sun50i-h616 = "sun50i_h616"
-
-LDFLAGS[unexport] = "1"
-
-do_compile() {
-    oe_runmake -C ${S} BUILD_BASE=${B} \
-      CROSS_COMPILE=${TARGET_PREFIX} \
-      PLAT=${PLATFORM} \
-      bl31 \
-      all
-}
-
-do_install() {
-    install -D -p -m 0644 ${B}/${PLATFORM}/release/bl31.bin ${DEPLOY_DIR_IMAGE}/bl31.bin
-}

recipes-bsp/sunxi-board-fex/sunxi-board-fex.bb

@@ -9,9 +9,9 @@ PR = "r0"
 
 COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
 
-SRC_URI = "git://github.com/linux-sunxi/sunxi-boards.git;protocol=https;branch=master"
+SRC_URI = "git://github.com/linux-sunxi/sunxi-boards.git;protocol=git"
 # Increase PV with SRCREV change
-SRCREV = "af5f938ea14a3614d35ad3d9ab51a5d392117444"
+SRCREV = "496ef0fbd166cc2395daa76dd3c359357420963d"
 
 S = "${WORKDIR}/git"
 

recipes-bsp/u-boot/files/0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch

@@ -1,21 +0,0 @@
-From 6a64d90ca4d976c16a2e102dbad0848e4d29776c Mon Sep 17 00:00:00 2001
-From: Florin Sarbu <florin@resin.io>
-Date: Wed, 12 Sep 2018 14:22:49 +0200
-Subject: [PATCH] nanopi_neo_air_defconfig: Enable eMMC support
-
-Upstream-status: Pending
-Signed-off-by: Florin Sarbu <florin@resin.io>
-
----
- configs/nanopi_neo_air_defconfig | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/configs/nanopi_neo_air_defconfig b/configs/nanopi_neo_air_defconfig
-index 806d95c1cc..8899cc3a15 100644
---- a/configs/nanopi_neo_air_defconfig
-+++ b/configs/nanopi_neo_air_defconfig
-@@ -9,3 +9,4 @@ CONFIG_DRAM_CLK=408
- CONFIG_CONSOLE_MUX=y
- CONFIG_USB_EHCI_HCD=y
- CONFIG_USB_OHCI_HCD=y
-+CONFIG_MMC_SUNXI_SLOT_EXTRA=2

recipes-bsp/u-boot/files/0002-Added-nanopi-r1-board-support.patch

@@ -1,40 +0,0 @@
-From 767a05572ef5b93c2e157749b1754cbe261ee43d Mon Sep 17 00:00:00 2001
-From: Marek Belisko <marek.belisko@open-nandra.com>
-Date: Fri, 8 Apr 2022 11:33:53 +0200
-Subject: [PATCH] Added nanopi-r1 board support
-
-Patch taken from : https://github.com/armbian/build/blob/master/patch/u-boot/u-boot-sunxi/add-nanopi-r1-and-duo2.patch
-
-Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
----
-diff --git a/configs/nanopi_r1_defconfig b/configs/nanopi_r1_defconfig
-new file mode 100644
-index 0000000..e028b41
---- /dev/null
-+++ b/configs/nanopi_r1_defconfig
-@@ -0,0 +1,22 @@
-+CONFIG_ARM=y
-+CONFIG_ARCH_SUNXI=y
-+CONFIG_SPL=y
-+CONFIG_MACH_SUN8I_H3=y
-+CONFIG_DRAM_CLK=408
-+CONFIG_DRAM_ZQ=3881979
-+CONFIG_DRAM_ODT_EN=y
-+CONFIG_MACPWR="PD6"
-+# CONFIG_VIDEO_DE2 is not set
-+CONFIG_NR_DRAM_BANKS=1
-+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-+CONFIG_CONSOLE_MUX=y
-+CONFIG_SYS_CLK_FREQ=480000000
-+# CONFIG_CMD_FLASH is not set
-+# CONFIG_SPL_DOS_PARTITION is not set
-+# CONFIG_SPL_EFI_PARTITION is not set
-+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-r1"
-+CONFIG_SUN8I_EMAC=y
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_USB_OHCI_HCD=y
-+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
--- 
-2.7.4
-

recipes-bsp/u-boot/files/aarch64/boot.cmd

@@ -1,11 +0,0 @@
-# Default to (primary) SD
-rootdev=mmcblk0p2
-if itest.b *0x28 == 0x02 ; then
-	# U-Boot loaded from eMMC or secondary SD so use it for rootfs too
-	echo "U-boot loaded from eMMC or secondary SD"
-	rootdev=mmcblk1p2
-fi
-setenv bootargs console=${console} console=tty1 root=/dev/${rootdev} rootwait panic=10 ${extra}
-load mmc 0:1 ${fdt_addr_r} ${fdtfile}
-load mmc 0:1 ${kernel_addr_r} Image
-booti ${kernel_addr_r} - ${fdt_addr_r}

recipes-bsp/u-boot/files/bananapi-m64/boot.cmd

@@ -1,11 +0,0 @@
-# Default to (primary) SD
-rootdev=mmcblk0p2
-if itest.b *0x28 == 0x02 ; then
-	# U-Boot loaded from eMMC or secondary SD so use it for rootfs too
-	echo "U-boot loaded from eMMC or secondary SD"
-	rootdev=mmcblk2p2
-fi
-setenv bootargs console=${console} console=tty1 root=/dev/${rootdev} rootwait panic=10 ${extra}
-load mmc 0:1 ${fdt_addr_r} ${fdtfile}
-load mmc 0:1 ${kernel_addr_r} Image
-booti ${kernel_addr_r} - ${fdt_addr_r}

recipes-bsp/u-boot/files/boot.cmd

@@ -1,11 +1,4 @@
-# Default to (primary) SD
-rootdev=mmcblk0p2
-if itest.b *0x28 == 0x02 ; then
-	# U-Boot loaded from eMMC or secondary SD so use it for rootfs too
-	echo "U-boot loaded from eMMC or secondary SD"
-	rootdev=mmcblk1p2
-fi
-setenv bootargs console=${console} console=tty1 root=/dev/${rootdev} rootwait panic=10 ${extra}
+setenv bootargs console=${console} console=tty1 root=/dev/mmcblk0p2 rootwait panic=10 ${extra}
 load mmc 0:1 ${fdt_addr_r} ${fdtfile} || load mmc 0:1 ${fdt_addr_r} boot/${fdtfile}
 load mmc 0:1 ${kernel_addr_r} zImage || load mmc 0:1 ${kernel_addr_r} boot/zImage || load mmc 0:1 ${kernel_addr_r} uImage || load mmc 0:1 ${kernel_addr_r} boot/uImage
 bootz ${kernel_addr_r} - ${fdt_addr_r} || bootm ${kernel_addr_r} - ${fdt_addr_r}

recipes-bsp/u-boot/u-boot-sunxi.bb

@@ -2,7 +2,7 @@ DESCRIPTION = "U-Boot port for sunxi"
 
 require recipes-bsp/u-boot/u-boot.inc
 
-LICENSE = "GPL-2.0-only"
+LICENSE = "GPLv2"
 LIC_FILES_CHKSUM = "file://Licenses/gpl-2.0.txt;md5=b234ee4d69f5fce4486a80fdaf4a4263"
 
 # No patches for other machines yet
@@ -19,10 +19,8 @@ UBOOT_MACHINE_olinuxino-a10s = "A10s-OLinuXino-Micro_config"
 UBOOT_MACHINE_meleg = "Mele_A1000G_config"
 
 SRC_URI = " \
-	git://github.com/linux-sunxi/u-boot-sunxi.git;protocol=https;branch=sunxi \
-	file://0001-gcc5-fixes.patch \
-	file://0002-gcc6-fixes.patch \
-	file://0003-No-gcc-version-specific-includes.patch \
+	git://github.com/linux-sunxi/u-boot-sunxi.git;protocol=git;branch=sunxi \
+	file://0002-gcc5-fixes.patch \
 	"
 
 PE = "1"
@@ -36,7 +34,3 @@ S = "${WORKDIR}/git"
 PACKAGE_ARCH = "${MACHINE_ARCH}"
 
 SPL_BINARY="u-boot-sunxi-with-spl.bin"
-
-do_configure () {
-    oe_runmake -C ${S} O=${B} ${UBOOT_MACHINE}
-}

recipes-bsp/u-boot/u-boot-sunxi/0003-No-gcc-version-specific-includes.patch

@@ -1,24 +0,0 @@
-From bc4aa5814cbedbfaa1c79dfe7ea2571fee7f2d51 Mon Sep 17 00:00:00 2001
-From: Andrey Lebedev <andrey@lebedev.lt>
-Date: Wed, 22 Jan 2020 20:00:11 +0200
-Subject: [PATCH] No gcc version-specific includes
-
-In order to support gcc-5 and above. Fixes compilation errors like
-
-linux/compiler-gcc9.h: No such file or directory
----
- include/linux/compiler-gcc.h | 1 -
- 1 file changed, 1 deletion(-)
-
-diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
-index 9896e547b9..5f0bd65f3a 100644
---- a/include/linux/compiler-gcc.h
-+++ b/include/linux/compiler-gcc.h
-@@ -90,4 +90,3 @@
- #define __gcc_header(x) #x
- #define _gcc_header(x) __gcc_header(linux/compiler-gcc##x.h)
- #define gcc_header(x) _gcc_header(x)
--#include gcc_header(__GNUC__)
--- 
-2.20.1
-

recipes-bsp/u-boot/u-boot_%.bbappend

@@ -1,30 +0,0 @@
-FILESEXTRAPATHS:prepend:sunxi := "${THISDIR}/files:"
-
-DEPENDS:append:sunxi = " bc-native dtc-native swig-native python3-native flex-native bison-native "
-DEPENDS:append:sun50i = " atf-sunxi "
-
-COMPATIBLE_MACHINE:sunxi = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
-
-DEFAULT_PREFERENCE:sun4i = "1"
-DEFAULT_PREFERENCE:sun5i = "1"
-DEFAULT_PREFERENCE:sun7i = "1"
-DEFAULT_PREFERENCE:sun8i = "1"
-DEFAULT_PREFERENCE:sun50i = "1"
-
-SRC_URI:append:sunxi = " \
-        file://0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch \
-	file://0002-Added-nanopi-r1-board-support.patch \
-        file://boot.cmd \
-"
-
-UBOOT_ENV_SUFFIX:sunxi = "scr"
-UBOOT_ENV:sunxi = "boot"
-
-EXTRA_OEMAKE:append:sunxi = ' HOSTLDSHARED="${BUILD_CC} -shared ${BUILD_LDFLAGS} ${BUILD_CFLAGS}" '
-EXTRA_OEMAKE:append:sun50i = " BL31=${DEPLOY_DIR_IMAGE}/bl31.bin SCP=/dev/null"
-
-do_compile_sun50i[depends] += "atf-sunxi:do_deploy"
-
-do_compile:append:sunxi() {
-    ${B}/tools/mkimage -C none -A arm -T script -d ${WORKDIR}/boot.cmd ${WORKDIR}/${UBOOT_ENV_BINARY}
-}

recipes-bsp/u-boot/u-boot_2016.03.bb

@@ -0,0 +1,44 @@
+DESCRIPTION="Upstream's U-boot configured for sunxi devices"
+
+require recipes-bsp/u-boot/u-boot.inc
+
+DEPENDS += "dtc-native"
+
+LICENSE = "GPLv2"
+
+LIC_FILES_CHKSUM = "\
+file://Licenses/Exceptions;md5=338a7cb1e52d0d1951f83e15319a3fe7 \
+file://Licenses/bsd-2-clause.txt;md5=6a31f076f5773aabd8ff86191ad6fdd5 \
+file://Licenses/bsd-3-clause.txt;md5=4a1190eac56a9db675d58ebe86eaf50c \
+file://Licenses/eCos-2.0.txt;md5=b338cb12196b5175acd3aa63b0a0805c \
+file://Licenses/gpl-2.0.txt;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+file://Licenses/ibm-pibs.txt;md5=c49502a55e35e0a8a1dc271d944d6dba \
+file://Licenses/isc.txt;md5=ec65f921308235311f34b79d844587eb \
+file://Licenses/lgpl-2.0.txt;md5=5f30f0716dfdd0d91eb439ebec522ec2 \
+file://Licenses/lgpl-2.1.txt;md5=4fbd65380cdd255951079008b364516c \
+file://Licenses/x11.txt;md5=b46f176c847b8742db02126fb8af92e2 \
+"
+
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
+
+DEFAULT_PREFERENCE_sun4i="1"
+DEFAULT_PREFERENCE_sun5i="1"
+DEFAULT_PREFERENCE_sun7i="1"
+
+SRC_URI = "git://git.denx.de/u-boot.git;branch=master \
+           file://boot.cmd"
+
+SRCREV = "df61a74e6845ec9bdcdd48d2aff5e9c2c6debeaa"
+
+PV = "v2016.03${SRCPV}"
+
+PE = "1"
+
+SPL_BINARY="u-boot-sunxi-with-spl.bin"
+
+UBOOT_ENV_SUFFIX = "scr"
+UBOOT_ENV = "boot"
+
+do_compile_append() {
+    ${S}/tools/mkimage -C none -A arm -T script -d ${WORKDIR}/boot.cmd ${WORKDIR}/${UBOOT_ENV_BINARY}
+}

recipes-devtools/python/files/setup.py.patch

@@ -0,0 +1,51 @@
+--- pyA20-0.2.1/setup.py	2014-09-04 12:17:18.000000000 +0200
++++ pyA20-0.2.1/setup.py	2014-11-24 17:44:37.000000000 +0100
+@@ -43,31 +43,31 @@
+     Detect processor type
+     :return:
+     """
+-    cpuinfo = open("/proc/cpuinfo", 'r')
+-    for line in cpuinfo:
+-        if "Hardware" in line:
+-            processor = line.split(":")[1].rstrip()
++    #cpuinfo = open("/proc/cpuinfo", 'r')
++    #for line in cpuinfo:
++    #    if "Hardware" in line:
++    #        processor = line.split(":")[1].rstrip()
+ 
+-            if "sun4i" in processor:
+-                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A10)")
++    #        if "sun4i" in processor:
++    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A10)")
+ 
+-            elif "sun5i" in processor:
+-                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A13)")
++    #        elif "sun5i" in processor:
++    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A13)")
+ 
+-            elif "sun7i" in processor:
+-                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A20)")
++    #        elif "sun7i" in processor:
++    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A20)")
+ 
+-            else:
+-                print ("Detected processor: " + print_color("unknown"))
++    #        else:
++    #            print ("Detected processor: " + print_color("unknown"))
+ 
+ 
+-            if processor_type not in processor:
+-                print_warning()
++    #        if processor_type not in processor:
++    #            print_warning()
+ 
+-            return
++    return
+ 
+-    print ("No processor detected")
+-    print_warning()
++    #print ("No processor detected")
++    #print_warning()
+ 
+ 
+ class build_ext(_build_ext):

recipes-devtools/python/pya20_0.2.1.bb

@@ -1,23 +1,24 @@
 DESCRIPTION = "A module to control Allwinner GPIO,SPI and I2C channels"
 HOMEPAGE = "https://pypi.python.org/pypi/pyA20"
 SECTION = "devel/python"
-LICENSE = "GPL-3.0-only"
-LIC_FILES_CHKSUM = "file://PKG-INFO;md5=4e584373bb0f46ef1e423cb7df37847d"
-DEPENDS = "python3"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://PKG-INFO;md5=bfe0261ded6cff75086193ec2f79129e"
+DEPENDS = "python"
 
 # No GPIO mappings for other machines yet
 COMPATIBLE_MACHINE = "(olinuxino-a13|olinuxino-a10|olinuxino-a20|olinuxino-a10lime|olinuxino-a20lime|olinuxino-a20lime2|olinuxino-a13som|olinuxino-a20som)"
 
-SRC_URI = "https://pypi.python.org/packages/source/p/pyA20/pyA20-${PV}.tar.gz \
+SRC_URI = "http://pypi.python.org/packages/source/p/pyA20/pyA20-${PV}.tar.gz \
+           file://setup.py.patch \
            file://mapping.h \
           "
 S = "${WORKDIR}/pyA20-${PV}"
 
-inherit distutils3
+inherit distutils
 
-do_compile:prepend() { 
+do_compile_prepend() { 
 cp ${WORKDIR}/mapping.h ${S}/pyA20/gpio/mapping.h
 }
 
-SRC_URI[md5sum] = "cab03b4931199804603d1074f6d8f48f"
-SRC_URI[sha256sum] = "4bef559a9c5a4d648d9834bad996cf2805b20d6063b8051029ffdf9deda2b536"
+SRC_URI[md5sum] = "2290066bbe274000c53693959a8005b4"
+SRC_URI[sha256sum] = "b15e4ee1016b7eb52001cbccde3751868624a88d2adbb9adc5404628f7e59e7e"

recipes-devtools/python/pya20som_0.2.1.bb

@@ -0,0 +1,24 @@
+DESCRIPTION = "A module to control Allwinner GPIO,SPI and I2C channels"
+HOMEPAGE = "https://pypi.python.org/pypi/pyA20SOM"
+SECTION = "devel/python"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://PKG-INFO;md5=cf6345f2cb2acee98b01c493d68b8322"
+DEPENDS = "python"
+
+# No GPIO mappings for other machines yet
+COMPATIBLE_MACHINE = "olinuxino-a20som"
+
+SRC_URI = "http://pypi.python.org/packages/source/p/pyA20SOM/pyA20SOM-${PV}.tar.gz \
+           file://setup.py.patch \
+           file://mapping.h \
+          "
+S = "${WORKDIR}/pyA20SOM-${PV}"
+
+inherit distutils
+
+do_compile_prepend() { 
+cp ${WORKDIR}/mapping.h ${S}/pyA20SOM/gpio/mapping.h
+}
+
+SRC_URI[md5sum] = "a720115ef1d3dffe82f42f2157ca1c56"
+SRC_URI[sha256sum] = "1ac1025596cc112964f7caac9a6a523d5da61623c248ccc178c6cbb4bc1b4549"

recipes-graphics/libgles/sunxi-mali_git.bb

@@ -3,26 +3,16 @@ DESCRIPTION = "libGLES for the A10/A13 Allwinner processor with Mali 400 (X11)"
 LICENSE = "Proprietary"
 LIC_FILES_CHKSUM = "file://README;md5=1b81a178e80ee888ee4571772699ab2c"
 
-COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i)"
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
 
 # These libraries shouldn't get installed in world builds unless something
 # explicitly depends upon them.
 EXCLUDE_FROM_WORLD = "1"
 PROVIDES = "virtual/libgles1 virtual/libgles2 virtual/egl"
+RPROVIDES_${PN} += "libGLESv2.so libEGL.so libGLESv2.so libGLESv1_CM.so libMali.so"
 
-# There's only hardfp version available
-python __anonymous() {
-    tunes = d.getVar("TUNE_FEATURES", True)
-    if not tunes:
-        return
-    if "callconvention-hard" not in tunes:
-        pkgn = d.getVar("PN", True)
-        pkgv = d.getVar("PV", True)
-        raise bb.parse.SkipPackage("%s-%s ONLY supports hardfp mode for now" % (pkgn, pkgv))
-}
-
-SRCREV = "d343311efc8db166d8371b28494f0f27b6a58724"
-SRC_URI = "git://github.com/linux-sunxi/sunxi-mali.git;protocol=https;branch=master \
+SRCREV_pn-${PN} = "d343311efc8db166d8371b28494f0f27b6a58724"
+SRC_URI = "gitsm://github.com/linux-sunxi/sunxi-mali.git \
            file://0001-Add-EGLSyncKHR-EGLTimeKHR-and-GLChar-definition.patch \
            file://0002-Add-missing-GLchar-definition.patch \
            file://0003-Fix-sed-to-replace-by-the-correct-var.patch \
@@ -31,7 +21,7 @@ SRC_URI = "git://github.com/linux-sunxi/sunxi-mali.git;protocol=https;branch=mas
 
 S = "${WORKDIR}/git"
 
-DEPENDS = "libdrm xorgproto libump patchelf-native"
+DEPENDS = "libdrm dri2proto libump"
 
 PACKAGECONFIG ??= "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11', '', d)} ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland', '', d)}"
 PACKAGECONFIG[wayland] = "EGL_TYPE=framebuffer,,,"
@@ -70,13 +60,11 @@ do_install() {
 
     make libdir=${D}${libdir}/ includedir=${D}${includedir}/ install
     make libdir=${D}${libdir}/ includedir=${D}${includedir}/ install -C include
-    rm -f ${D}${includedir}/KHR/khrplatform.h
 
     # Fix .so name and create symlinks, binary package provides .so wich can't be included directly in package without triggering the 'dev-so' QA check
     # Packages like xf86-video-fbturbo dlopen() libUMP.so, so we do need to ship the .so files in ${PN}
 
     mv ${D}${libdir}/libMali.so ${D}${libdir}/libMali.so.3
-    patchelf --set-soname libMali.so.3 ${D}${libdir}/libMali.so.3
     ln -sf libMali.so.3 ${D}${libdir}/libMali.so
 
     for flib in libEGL.so.1.4 libGLESv1_CM.so.1.1 libGLESv2.so.2.0 ; do
@@ -91,14 +79,8 @@ do_install() {
 
 # Packages like xf86-video-fbturbo dlopen() libUMP.so, so we do need to ship the .so files in ${PN}
 PACKAGES =+ "${PN}-test"
-
-RPROVIDES:${PN} += "libGLESv2.so libEGL.so libGLESv2.so libGLESv1_CM.so libMali.so"
-RDEPENDS:${PN}-test = "${PN}"
-
-FILES:${PN} += "${libdir}/lib*.so"
-FILES:${PN}-dev = "${includedir} ${libdir}/pkgconfig/*"
-FILES:${PN}-test = "${bindir}/sunximali-test"
-
+FILES_${PN} += "${libdir}/lib*.so"
+FILES_${PN}-dev = "${includedir} ${libdir}/pkgconfig/*"
+FILES_${PN}-test = "${bindir}/sunximali-test"
 # These are closed binaries generated elsewhere so don't check ldflags & text relocations
-INSANE_SKIP:${PN} = "dev-so ldflags textrel"
-INSANE_SKIP:${PN}-test = "dev-so ldflags textrel"
+INSANE_SKIP_${PN} = "dev-so ldflags textrel"

recipes-graphics/libump/libump_git.bb

@@ -1,14 +1,14 @@
 DESCRIPTION = "Unified Memory Provider userspace API source code needed for xf86-video-mali compilation"
 
-LICENSE = "Apache-2.0"
+LICENSE = "Apache-2"
 LIC_FILES_CHKSUM = "file://debian/copyright;md5=edf7fb6071cae7ec80d537a05ee17198"
 
 inherit autotools
 
 PV = "r4p0-00rel0+git${SRCPV}"
-SRCREV = "ec0680628744f30b8fac35e41a7bd8e23e59c39f"
+SRCREV_pn-${PN} = "ec0680628744f30b8fac35e41a7bd8e23e59c39f"
 
-SRC_URI = "git://github.com/linux-sunxi/libump.git;protocol=https;branch=master"
+SRC_URI = "git://github.com/linux-sunxi/libump.git"
 
 S = "${WORKDIR}/git"
 

recipes-graphics/mesa/mesa-gl_%.bbappend

@@ -1 +0,0 @@
-PACKAGECONFIG:class-target = "opengl x11 gallium"

recipes-graphics/mesa/mesa_%.bbappend

@@ -1,5 +0,0 @@
-# Enable lima and panfrost Mesa drivers
-PACKAGECONFIG:append:use-mailine-graphics = " lima panfrost"
-# Enable KMS renderonly Mesa support
-# See https://cgit.freedesktop.org/mesa/mesa/commit/?id=2b780fe89300199f2334539aa1678e9b68f0434f
-GALLIUMDRIVERS:append:use-mailine-graphics = ",kmsro"

recipes-graphics/tslib/tslib/0001-Support-reading-coordinates-from-multitouch-devices.patch

@@ -0,0 +1,79 @@
+From c525c0b5d8eada982c99442454fcf7b8364e10b3 Mon Sep 17 00:00:00 2001
+From: Florian Boor <florian@kernelconcepts.de>
+Date: Fri, 1 Apr 2011 23:30:21 +0200
+Subject: [PATCH] Support reading coordinates from multitouch devices.
+
+Signed-off-by: Florian Boor <florian@kernelconcepts.de>
+Signed-off-by: Christopher Larson <kergoth@gmail.com>
+---
+ plugins/input-raw.c | 33 +++++++++++++++++++++++----------
+ 1 file changed, 23 insertions(+), 10 deletions(-)
+
+diff --git a/plugins/input-raw.c b/plugins/input-raw.c
+index 4396eab..1e48505 100644
+--- a/plugins/input-raw.c
++++ b/plugins/input-raw.c
+@@ -40,6 +40,11 @@
+ # define KEY_CNT (KEY_MAX+1)
+ #endif
+ 
++#ifndef ABS_MT_POSITION_X
++# define ABS_MT_POSITION_X       0x35    /* Center X ellipse position */
++# define ABS_MT_POSITION_Y       0x36    /* Center Y ellipse position */
++#endif
++
+ #include "tslib-private.h"
+ 
+ #define GRAB_EVENTS_WANTED	1
+@@ -160,16 +165,17 @@ static int ts_input_read(struct tslib_module_info *inf,
+ 				}
+ 				break;
+ 			case EV_SYN:
+-				/* Fill out a new complete event */
+-				if (pen_up) {
+-					samp->x = 0;
+-					samp->y = 0;
+-					samp->pressure = 0;
+-					pen_up = 0;
+-				} else {
+-					samp->x = i->current_x;
+-					samp->y = i->current_y;
+-					samp->pressure = i->current_p;
++				if (ev.code == SYN_REPORT) {
++					/* Fill out a new complete event */
++					if (pen_up) {
++						samp->x = 0;
++						samp->y = 0;
++						samp->pressure = 0;
++						pen_up = 0;
++					} else {
++						samp->x = i->current_x;
++						samp->y = i->current_y;
++						samp->pressure = i->current_p;
+ 				}
+ 				samp->tv = ev.time;
+ 	#ifdef DEBUG
+@@ -179,6 +185,7 @@ static int ts_input_read(struct tslib_module_info *inf,
+ 	#endif /* DEBUG */
+ 				samp++;
+ 				total++;
++				}
+ 				break;
+ 			case EV_ABS:
+ 				switch (ev.code) {
+@@ -188,6 +195,12 @@ static int ts_input_read(struct tslib_module_info *inf,
+ 				case ABS_Y:
+ 					i->current_y = ev.value;
+ 					break;
++				case ABS_MT_POSITION_X:
++					i->current_x = ev.value;
++					break;
++				case ABS_MT_POSITION_Y:
++					i->current_y = ev.value;
++					break;
+ 				case ABS_PRESSURE:
+ 					i->current_p = ev.value;
+ 					break;
+-- 
+1.8.1.4
+

recipes-graphics/tslib/tslib_1.1.bbappend

@@ -0,0 +1,4 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+
+SRC_URI += "file://tslib.patch"
+

recipes-graphics/tslib/tslib_1.1.bbappend.disabled

@@ -1,4 +0,0 @@
-FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
-
-SRC_URI += "file://tslib.patch"
-

recipes-graphics/xorg-xserver/libdri2_git.bb

@@ -1,15 +1,15 @@
 DESCRIPTION = "Library for the DRI2 extension to the X Window System"
 
-LICENSE = "MIT-CMU"
+LICENSE = "MIT-X"
 LIC_FILES_CHKSUM = "file://COPYING;md5=827da9afab1f727f2a66574629e0f39c"
 
-DEPENDS = "libdrm libxext libxfixes xorgproto"
+DEPENDS = "libdrm libxext xextproto libxfixes dri2proto"
 
 PE = "1"
 PV = "1.0.0+git${SRCPV}"
 SRC_URI = "git://github.com/robclark/libdri2.git;protocol=http;branch=master"
 
-SRCREV = "4f1eef3183df2b270c3d5cbef07343ee5127a6a4"
+SRCREV_pn-${PN} = "4f1eef3183df2b270c3d5cbef07343ee5127a6a4"
 
 S = "${WORKDIR}/git"
 

recipes-graphics/xorg-xserver/xf86-video-fbturbo_git.bb

@@ -2,14 +2,14 @@ require recipes-graphics/xorg-driver/xorg-driver-video.inc
 
 DESCRIPTION = "X.Org X server -- A10/A13 display driver"
 
-LICENSE = "MIT-CMU"
+LICENSE = "MIT-X"
 LIC_FILES_CHKSUM = "file://COPYING;md5=f91dc3ee5ce59eb4b528e67e98a31266"
 
-DEPENDS += "sunxi-mali libump xorgproto"
+DEPENDS += "sunxi-mali libump xf86driproto"
 
 PE = "3"
 PV = "0.5.1+git${SRCPV}"
-SRCREV = "e094e3c8f9004ca3347694bd05b99d136e8621b9"
+SRCREV_pn-${PN} = "e094e3c8f9004ca3347694bd05b99d136e8621b9"
 
 SRC_URI = "git://github.com/ssvb/xf86-video-fbturbo.git;protocol=http;branch=master \
            file://20-fbturbo.conf"
@@ -18,9 +18,9 @@ S = "${WORKDIR}/git"
 
 CFLAGS += " -I${STAGING_INCDIR}/xorg "
 
-do_install:append() {
+do_install_append() {
     install -d ${D}${datadir}/X11/xorg.conf.d
     install -m 0644 ${WORKDIR}/20-fbturbo.conf ${D}${datadir}/X11/xorg.conf.d
 }
 
-FILES:${PN} += "${datadir}/X11/xorg.conf.d/20-fbturbo.conf"
+FILES_${PN} += "${datadir}/X11/xorg.conf.d/20-fbturbo.conf"

recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend

@@ -1 +1 @@
-FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"

recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend

@@ -1 +0,0 @@
-DEPENDS += "libxshmfence"

recipes-kernel/linux-firmware/linux-firmware_%.bbappend

@@ -1,13 +0,0 @@
-# The brcmfmac driver looks for NVRAM files using the first entry in board
-# compatible since kernel >= 5.0:
-# https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0ad4b55b2f29784f93875e6231bf57cd233624a2
-# We create a link to the AP6212 module NVRAM file so that firmware is
-# autodetected by the driver.
-# WARNING: The following commit is required for NVRAM files to be included in
-# linux-firmware-bcm43430 package:
-# http://git.openembedded.org/openembedded-core/commit/?id=dde0f79f32fa6bab045ef60199903f74c4cc3393
-do_install:append() {
-	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2.txt
-	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2-h3.txt
-	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt
-}

recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0003-drv-fix-incldue-path-for-unisocwcn.patch

@@ -1,45 +0,0 @@
-From 5138d597275fd503573fac84018186bd18740644 Mon Sep 17 00:00:00 2001
-From: pbiel <pbiel7@gmail.com>
-Date: Thu, 30 Mar 2023 22:45:33 +0200
-Subject: [PATCH] Fix incldue path for unisocwcn
-
----
- drivers/net/wireless/uwe5622/Makefile           | 4 +++-
- drivers/net/wireless/uwe5622/unisocwcn/Makefile | 6 +++---
- 2 files changed, 6 insertions(+), 4 deletions(-)
-
-diff --git a/drivers/net/wireless/uwe5622/Makefile b/drivers/net/wireless/uwe5622/Makefile
-index 313ea5123..e9a398584 100644
---- a/drivers/net/wireless/uwe5622/Makefile
-+++ b/drivers/net/wireless/uwe5622/Makefile
-@@ -2,7 +2,9 @@ obj-$(CONFIG_AW_WIFI_DEVICE_UWE5622) += unisocwcn/
- obj-$(CONFIG_WLAN_UWE5622)    += unisocwifi/
- obj-$(CONFIG_TTY_OVERY_SDIO)  += tty-sdio/
- 
--UNISOCWCN_DIR := $(shell cd $(src)/unisocwcn/ && /bin/pwd)
-+mkfile_path := $(abspath $(lastword $(MAKEFILE_LIST)))
-+UNISOCWCN_DIR := $(dir $(mkfile_path))/unisocwcn/
-+
- UNISOC_BSP_INCLUDE := $(UNISOCWCN_DIR)/include
- export UNISOC_BSP_INCLUDE
- 
-diff --git a/drivers/net/wireless/uwe5622/unisocwcn/Makefile b/drivers/net/wireless/uwe5622/unisocwcn/Makefile
-index f9c595747..1ad490594 100644
---- a/drivers/net/wireless/uwe5622/unisocwcn/Makefile
-+++ b/drivers/net/wireless/uwe5622/unisocwcn/Makefile
-@@ -129,9 +129,9 @@ ccflags-y += -DCONFIG_WCN_BOOT
- ccflags-y += -DCONFIG_WCN_UTILS
- 
- #### include path ######
--ccflags-y += -I$(src)/include/
--ccflags-y += -I$(src)/platform/
--ccflags-y += -I$(src)/platform/rf/
-+ccflags-y += -I$(srctree)/$(src)/include/
-+ccflags-y += -I$(srctree)/$(src)/platform/
-+ccflags-y += -I$(srctree)/$(src)/platform/rf/
- 
- #### add cflag for Customer ######
- ### ---------- Hisilicon start ---------- ###
--- 
-2.34.1
-

recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0004-drv-wireless-adapt-uwe5622-wifi-driver-to-kernel-6.1.patch

@@ -1,177 +0,0 @@
-From 5f4d2d5fc32dfe41c73cac36ec6747c34e5562a3 Mon Sep 17 00:00:00 2001
-From: pbiel <pbiel7@gmail.com>
-Date: Wed, 15 Mar 2023 23:04:27 +0100
-Subject: [PATCH] wireless: Adapt uwe5622 wifi driver to kernel 6.1
-
----
- drivers/net/wireless/uwe5622/tty-sdio/lpm.c            |  2 +-
- .../uwe5622/unisocwcn/boot/wcn_integrate_dev.c         |  2 +-
- .../uwe5622/unisocwcn/platform/wcn_parn_parser.c       |  2 +-
- .../wireless/uwe5622/unisocwcn/platform/wcn_procfs.c   |  2 +-
- .../wireless/uwe5622/unisocwcn/usb/wcn_usb_download.c  |  2 +-
- .../net/wireless/uwe5622/unisocwcn/usb/wcn_usb_test.c  |  6 +++---
- drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c     | 10 +++++-----
- drivers/net/wireless/uwe5622/unisocwifi/cmdevt.c       |  2 +-
- 8 files changed, 14 insertions(+), 14 deletions(-)
-
-diff --git a/drivers/net/wireless/uwe5622/tty-sdio/lpm.c b/drivers/net/wireless/uwe5622/tty-sdio/lpm.c
-index b2d9a8994e5e..35e30651a921 100644
---- a/drivers/net/wireless/uwe5622/tty-sdio/lpm.c
-+++ b/drivers/net/wireless/uwe5622/tty-sdio/lpm.c
-@@ -70,7 +70,7 @@ static int btwrite_proc_show(struct seq_file *m, void *v)
- 
- static int bluesleep_open_proc_btwrite(struct inode *inode, struct file *file)
- {
--	return single_open(file, btwrite_proc_show, PDE_DATA(inode));
-+	return single_open(file, btwrite_proc_show, pde_data(inode));
- }
- 
- static const struct proc_ops lpm_proc_btwrite_fops = {
-diff --git a/drivers/net/wireless/uwe5622/unisocwcn/boot/wcn_integrate_dev.c b/drivers/net/wireless/uwe5622/unisocwcn/boot/wcn_integrate_dev.c
-index 3ee6910e7cf7..29a3ec298bc1 100644
---- a/drivers/net/wireless/uwe5622/unisocwcn/boot/wcn_integrate_dev.c
-+++ b/drivers/net/wireless/uwe5622/unisocwcn/boot/wcn_integrate_dev.c
-@@ -562,7 +562,7 @@ static struct wcn_proc_data g_proc_data = {
- static int wcn_platform_open(struct inode *inode, struct file *filp)
- {
- 	struct platform_proc_file_entry
--	*entry = (struct platform_proc_file_entry *)PDE_DATA(inode);
-+	*entry = (struct platform_proc_file_entry *)pde_data(inode);
- 
- 	WCN_INFO("entry name:%s\n!", entry->name);
- 
-diff --git a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c
-index aea7d6d0fe57..bd841f0b32d3 100644
---- a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c
-+++ b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c
-@@ -146,7 +146,7 @@ static int prefixcmp(const char *str, const char *prefix)
- }
- 
- #if KERNEL_VERSION(3, 19, 0) <= LINUX_VERSION_CODE
--static int find_callback(struct dir_context *ctx, const char *name, int namlen,
-+static bool find_callback(struct dir_context *ctx, const char *name, int namlen,
- 		     loff_t offset, u64 ino, unsigned int d_type)
- #else
- static int find_callback(void *ctx, const char *name, int namlen,
-diff --git a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_procfs.c b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_procfs.c
-index 2edb7903d80e..9e453365bba8 100644
---- a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_procfs.c
-+++ b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_procfs.c
-@@ -431,7 +431,7 @@ static const struct proc_ops mdbg_snap_shoot_seq_fops = {
- static int mdbg_proc_open(struct inode *inode, struct file *filp)
- {
- 	struct mdbg_proc_entry *entry =
--		(struct mdbg_proc_entry *)PDE_DATA(inode);
-+		(struct mdbg_proc_entry *)pde_data(inode);
- 	filp->private_data = entry;
- 
- 	return 0;
-diff --git a/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_download.c b/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_download.c
-index 8f228d403909..750bfc0466cb 100644
---- a/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_download.c
-+++ b/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_download.c
-@@ -82,7 +82,7 @@ static int wcn_usb_dopen(struct inode *inode, struct file *file)
- {
- 	struct wcn_usb_ddata *data;
- 
--	data = (struct wcn_usb_ddata *)PDE_DATA(inode);
-+	data = (struct wcn_usb_ddata *)pde_data(inode);
- 
- 	if (!data)
- 		return -EIO;
-diff --git a/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_test.c b/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_test.c
-index c2cccc658c0d..e7a9f258943e 100644
---- a/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_test.c
-+++ b/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_test.c
-@@ -61,7 +61,7 @@ static int wcn_usb_channel_open(struct inode *inode, struct file *file)
- {
- 	struct channel *channel;
- 
--	channel = (struct channel *)PDE_DATA(inode);
-+	channel = (struct channel *)pde_data(inode);
- 
- 	if (!channel)
- 		return -EIO;
-@@ -467,7 +467,7 @@ static int wcn_usb_chnmg_open(struct inode *inode, struct file *file)
- {
- 	struct chnmg *chnmg;
- 	/* get channel_list head */
--	chnmg = (struct chnmg *)PDE_DATA(inode);
-+	chnmg = (struct chnmg *)pde_data(inode);
- 
- 	file->private_data = chnmg;
- 	return 0;
-@@ -916,7 +916,7 @@ static int print_level_open(struct inode *inode, struct file *file)
- {
- 	struct chnmg *chnmg;
- 	/* get channel_list head */
--	chnmg = (struct chnmg *)PDE_DATA(inode);
-+	chnmg = (struct chnmg *)pde_data(inode);
- 
- 	file->private_data = chnmg;
- 	return 0;
-diff --git a/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c b/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c
-index daef880ae3c0..2231388da70a 100644
---- a/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c
-+++ b/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c
-@@ -703,7 +703,7 @@ static int sprdwl_add_cipher_key(struct sprdwl_vif *vif, bool pairwise,
- }
- 
- static int sprdwl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
--				   u8 key_index, bool pairwise,
-+				   int link_id, u8 key_index, bool pairwise,
- 				   const u8 *mac_addr,
- 				   struct key_params *params)
- {
-@@ -725,7 +725,7 @@ static int sprdwl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
- }
- 
- static int sprdwl_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
--				   u8 key_index, bool pairwise,
-+				   int link_id, u8 key_index, bool pairwise,
- 				   const u8 *mac_addr)
- {
- 	struct sprdwl_vif *vif = netdev_priv(ndev);
-@@ -755,7 +755,7 @@ static int sprdwl_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
- 
- static int sprdwl_cfg80211_set_default_key(struct wiphy *wiphy,
- 					   struct net_device *ndev,
--					   u8 key_index, bool unicast,
-+					   int link_id, u8 key_index, bool unicast,
- 					   bool multicast)
- {
- 	struct sprdwl_vif *vif = netdev_priv(ndev);
-@@ -984,7 +984,7 @@ static int sprdwl_cfg80211_change_beacon(struct wiphy *wiphy,
- 	return sprdwl_change_beacon(vif, beacon);
- }
- 
--static int sprdwl_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev)
-+static int sprdwl_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev, unsigned int link_id)
- {
- #ifdef DFS_MASTER
- 	struct sprdwl_vif *vif = netdev_priv(ndev);
-@@ -2367,7 +2367,7 @@ void sprdwl_report_connection(struct sprdwl_vif *vif,
- 		 conn_info->status == SPRDWL_ROAM_SUCCESS){
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 14, 0)
- 		struct cfg80211_roam_info roam_info = {
--			.bss = bss,
-+			.links[0].bss = bss,
- 			.req_ie = conn_info->req_ie,
- 			.req_ie_len = conn_info->req_ie_len,
- 			.resp_ie = conn_info->resp_ie,
-diff --git a/drivers/net/wireless/uwe5622/unisocwifi/cmdevt.c b/drivers/net/wireless/uwe5622/unisocwifi/cmdevt.c
-index e81619b12e39..1ecbfac5b490 100644
---- a/drivers/net/wireless/uwe5622/unisocwifi/cmdevt.c
-+++ b/drivers/net/wireless/uwe5622/unisocwifi/cmdevt.c
-@@ -3296,7 +3296,7 @@ void sprdwl_event_chan_changed(struct sprdwl_vif *vif, u8 *data, u16 len)
- 						NL80211_CHAN_HT20);
- 		else
- 			wl_err("%s, ch is null!\n", __func__);
--		cfg80211_ch_switch_notify(vif->ndev, &chandef);
-+		cfg80211_ch_switch_notify(vif->ndev, &chandef, 0);
- 	}
- }
- 
--- 
-2.34.1
-

recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0005-drv-fix-setting-mac-address-for-netdev-in-uwe5622.patch

@@ -1,35 +0,0 @@
-From 9211a92d07e9a43fce104f87f9d45e890257b699 Mon Sep 17 00:00:00 2001
-From: pbiel <pbiel7@gmail.com>
-Date: Tue, 7 Mar 2023 20:28:44 +0100
-Subject: [PATCH] wireless: fix setting mac address for netdev in uwe5622
- unisocwifi driver
-
----
- drivers/net/wireless/uwe5622/unisocwifi/main.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
-diff --git a/drivers/net/wireless/uwe5622/unisocwifi/main.c b/drivers/net/wireless/uwe5622/unisocwifi/main.c
-index 21efdf4e0..566a9a7f3 100644
---- a/drivers/net/wireless/uwe5622/unisocwifi/main.c
-+++ b/drivers/net/wireless/uwe5622/unisocwifi/main.c
-@@ -1356,6 +1356,7 @@ static struct sprdwl_vif *sprdwl_register_netdev(struct sprdwl_priv *priv,
- 	struct wireless_dev *wdev;
- 	struct sprdwl_vif *vif;
- 	int ret;
-+	u8 target_mac_addr[ETH_ALEN] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
- 
- #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 17, 0))
- 	ndev = alloc_netdev(sizeof(*vif), name, NET_NAME_UNKNOWN, ether_setup);
-@@ -1411,7 +1412,8 @@ static struct sprdwl_vif *sprdwl_register_netdev(struct sprdwl_priv *priv,
- 	ndev->features |= NETIF_F_SG;
- 	SET_NETDEV_DEV(ndev, wiphy_dev(priv->wiphy));
- 
--	sprdwl_set_mac_addr(vif, addr, ndev->dev_addr);
-+	sprdwl_set_mac_addr(vif, addr, target_mac_addr);
-+	dev_addr_set(ndev, target_mac_addr);
- 
- #ifdef CONFIG_P2P_INTF
- 	if (type == NL80211_IFTYPE_P2P_DEVICE)
--- 
-2.34.1
-

recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0007-drv-add-sunxi_get_soc_chipid-and-sunxi_get_serial.patch

@@ -1,60 +0,0 @@
-From 452a691a83df1aab77cec33203cb04a817817a05 Mon Sep 17 00:00:00 2001
-From: The-going <48602507+The-going@users.noreply.github.com>
-Date: Thu, 5 May 2022 22:55:13 +0300
-Subject: [PATCH] drv: nvmem: sunxi_sid: Add sunxi_get_soc_chipid,
- sunxi_get_serial
-
----
- drivers/nvmem/sunxi_sid.c | 28 ++++++++++++++++++++++++++++
- 1 file changed, 28 insertions(+)
-
-diff --git a/drivers/nvmem/sunxi_sid.c b/drivers/nvmem/sunxi_sid.c
-index 37a6abb0e..c81fac63d 100644
---- a/drivers/nvmem/sunxi_sid.c
-+++ b/drivers/nvmem/sunxi_sid.c
-@@ -37,6 +37,25 @@ struct sunxi_sid {
- 	u32			value_offset;
- };
- 
-+static unsigned int sunxi_soc_chipid[4];
-+static unsigned int sunxi_serial[4];
-+
-+int sunxi_get_soc_chipid(unsigned char *chipid)
-+{
-+	memcpy(chipid, sunxi_soc_chipid, 16);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(sunxi_get_soc_chipid);
-+
-+int sunxi_get_serial(unsigned       char *serial)
-+{
-+	memcpy(serial, sunxi_serial, 16);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(sunxi_get_serial);
-+
- static int sunxi_sid_read(void *context, unsigned int offset,
- 			  void *val, size_t bytes)
- {
-@@ -167,6 +186,15 @@ static int sunxi_sid_probe(struct platform_device *pdev)
- 
- 	platform_set_drvdata(pdev, nvmem);
- 
-+	nvmem_cfg->reg_read(sid, 0, &sunxi_soc_chipid[0], sizeof(int));
-+	nvmem_cfg->reg_read(sid, 4, &sunxi_soc_chipid[1], sizeof(int));
-+	nvmem_cfg->reg_read(sid, 8, &sunxi_soc_chipid[2], sizeof(int));
-+	nvmem_cfg->reg_read(sid, 12, &sunxi_soc_chipid[3], sizeof(int));
-+
-+	sunxi_serial[0] = sunxi_soc_chipid[3];
-+	sunxi_serial[1] = sunxi_soc_chipid[2];
-+	sunxi_serial[2] = (sunxi_soc_chipid[1] >> 16) & 0x0ffff;
-+
- 	return 0;
- }
- 
--- 
-2.35.3
-
-

recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0008-drv-add-sunxi-addr-driver.patch

@@ -1,612 +0,0 @@
-From 418436514e2e64e07e7fd2ef9d77ec4712d1033b Mon Sep 17 00:00:00 2001
-From: pbiel <pbiel7@gmail.com>
-Date: Fri, 24 Feb 2023 10:38:03 +0100
-Subject: [PATCH 2/2] Add sunxi addr driver
-
----
- drivers/misc/Kconfig                 |   1 +
- drivers/misc/Makefile                |   1 +
- drivers/misc/sunxi-addr/Kconfig      |   6 +
- drivers/misc/sunxi-addr/Makefile     |   5 +
- drivers/misc/sunxi-addr/sha256.c     | 178 +++++++++++++
- drivers/misc/sunxi-addr/sunxi-addr.c | 358 +++++++++++++++++++++++++++
- 6 files changed, 549 insertions(+)
- create mode 100644 drivers/misc/sunxi-addr/Kconfig
- create mode 100644 drivers/misc/sunxi-addr/Makefile
- create mode 100644 drivers/misc/sunxi-addr/sha256.c
- create mode 100644 drivers/misc/sunxi-addr/sunxi-addr.c
-
-diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
-index 358ad56f6..c59480dc8 100644
---- a/drivers/misc/Kconfig
-+++ b/drivers/misc/Kconfig
-@@ -514,4 +514,5 @@ source "drivers/misc/habanalabs/Kconfig"
- source "drivers/misc/uacce/Kconfig"
- source "drivers/misc/pvpanic/Kconfig"
- source "drivers/misc/mchp_pci1xxxx/Kconfig"
-+source "drivers/misc/sunxi-addr/Kconfig"
- endmenu
-diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
-index ac9b3e757..487a2bf2d 100644
---- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -62,3 +62,4 @@ obj-$(CONFIG_HI6421V600_IRQ)	+= hi6421v600-irq.o
- obj-$(CONFIG_OPEN_DICE)		+= open-dice.o
- obj-$(CONFIG_GP_PCI1XXXX)	+= mchp_pci1xxxx/
- obj-$(CONFIG_VCPU_STALL_DETECTOR)	+= vcpu_stall_detector.o
-+obj-$(CONFIG_SUNXI_ADDR_MGT)    += sunxi-addr/
-\ No newline at end of file
-diff --git a/drivers/misc/sunxi-addr/Kconfig b/drivers/misc/sunxi-addr/Kconfig
-new file mode 100644
-index 000000000..801dd2c02
---- /dev/null
-+++ b/drivers/misc/sunxi-addr/Kconfig
-@@ -0,0 +1,6 @@
-+config SUNXI_ADDR_MGT
-+  tristate "Allwinner Network MAC Addess Manager"
-+  depends on BT || ETHERNET || WLAN
-+  depends on NVMEM_SUNXI_SID
-+  help
-+    allwinner network mac address management
-diff --git a/drivers/misc/sunxi-addr/Makefile b/drivers/misc/sunxi-addr/Makefile
-new file mode 100644
-index 000000000..f01fd4783
---- /dev/null
-+++ b/drivers/misc/sunxi-addr/Makefile
-@@ -0,0 +1,5 @@
-+#
-+# Makefile for wifi mac addr manager drivers
-+#
-+sunxi_addr-objs := sunxi-addr.o sha256.o
-+obj-$(CONFIG_SUNXI_ADDR_MGT)   += sunxi_addr.o
-diff --git a/drivers/misc/sunxi-addr/sha256.c b/drivers/misc/sunxi-addr/sha256.c
-new file mode 100644
-index 000000000..78825810c
---- /dev/null
-+++ b/drivers/misc/sunxi-addr/sha256.c
-@@ -0,0 +1,178 @@
-+/*
-+ * Local implement of sha256.
-+ *
-+ * Copyright (C) 2013 Allwinner.
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+
-+/****************************** MACROS ******************************/
-+#define ROTRIGHT(a, b) (((a) >> (b)) | ((a) << (32 - (b))))
-+#define CH(x, y, z)    (((x) & (y)) ^ (~(x) & (z)))
-+#define MAJ(x, y, z)   (((x) & (y)) ^  ((x) & (z)) ^ ((y) & (z)))
-+#define EP0(x)         (ROTRIGHT(x,  2) ^ ROTRIGHT(x, 13) ^ ROTRIGHT(x, 22))
-+#define EP1(x)         (ROTRIGHT(x,  6) ^ ROTRIGHT(x, 11) ^ ROTRIGHT(x, 25))
-+#define SIG0(x)        (ROTRIGHT(x,  7) ^ ROTRIGHT(x, 18) ^ ((x) >> 3))
-+#define SIG1(x)        (ROTRIGHT(x, 17) ^ ROTRIGHT(x, 19) ^ ((x) >> 10))
-+
-+/**************************** VARIABLES *****************************/
-+static const uint32_t k[64] = {
-+	0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5,
-+	0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5,
-+	0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3,
-+	0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174,
-+	0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc,
-+	0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da,
-+	0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7,
-+	0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967,
-+	0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13,
-+	0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85,
-+	0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3,
-+	0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070,
-+	0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5,
-+	0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3,
-+	0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208,
-+	0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2
-+};
-+
-+struct sha256_ctx {
-+	uint8_t data[64];   /* current 512-bit chunk of message data, just like a buffer */
-+	uint32_t datalen;   /* sign the data length of current chunk */
-+	uint64_t bitlen;    /* the bit length of the total message */
-+	uint32_t state[8];  /* store the middle state of hash abstract */
-+};
-+
-+/*********************** FUNCTION DEFINITIONS ***********************/
-+static void sha256_transform(struct sha256_ctx *ctx, const uint8_t *data)
-+{
-+	uint32_t a, b, c, d, e, f, g, h, i, j, t1, t2, m[64];
-+
-+	/* initialization */
-+	for (i = 0, j = 0; i < 16; ++i, j += 4)
-+		m[i] = (data[j] << 24) | (data[j + 1] << 16) |
-+			(data[j + 2] << 8) | (data[j + 3]);
-+	for ( ; i < 64; ++i)
-+		m[i] = SIG1(m[i - 2]) + m[i - 7] + SIG0(m[i - 15]) + m[i - 16];
-+
-+	a = ctx->state[0];
-+	b = ctx->state[1];
-+	c = ctx->state[2];
-+	d = ctx->state[3];
-+	e = ctx->state[4];
-+	f = ctx->state[5];
-+	g = ctx->state[6];
-+	h = ctx->state[7];
-+
-+	for (i = 0; i < 64; ++i) {
-+		t1 = h + EP1(e) + CH(e, f, g) + k[i] + m[i];
-+		t2 = EP0(a) + MAJ(a, b, c);
-+		h = g;
-+		g = f;
-+		f = e;
-+		e = d + t1;
-+		d = c;
-+		c = b;
-+		b = a;
-+		a = t1 + t2;
-+	}
-+
-+	ctx->state[0] += a;
-+	ctx->state[1] += b;
-+	ctx->state[2] += c;
-+	ctx->state[3] += d;
-+	ctx->state[4] += e;
-+	ctx->state[5] += f;
-+	ctx->state[6] += g;
-+	ctx->state[7] += h;
-+}
-+
-+static void sha256_init(struct sha256_ctx *ctx)
-+{
-+	ctx->datalen = 0;
-+	ctx->bitlen = 0;
-+	ctx->state[0] = 0x6a09e667;
-+	ctx->state[1] = 0xbb67ae85;
-+	ctx->state[2] = 0x3c6ef372;
-+	ctx->state[3] = 0xa54ff53a;
-+	ctx->state[4] = 0x510e527f;
-+	ctx->state[5] = 0x9b05688c;
-+	ctx->state[6] = 0x1f83d9ab;
-+	ctx->state[7] = 0x5be0cd19;
-+}
-+
-+static void sha256_update(struct sha256_ctx *ctx, const uint8_t *data, size_t len)
-+{
-+	uint32_t i;
-+
-+	for (i = 0; i < len; ++i) {
-+		ctx->data[ctx->datalen] = data[i];
-+		ctx->datalen++;
-+		if (ctx->datalen == 64) {
-+			/* 64 byte = 512 bit  means the buffer ctx->data has
-+			 * fully stored one chunk of message,
-+			 * so do the sha256 hash map for the current chunk.
-+			 */
-+			sha256_transform(ctx, ctx->data);
-+			ctx->bitlen += 512;
-+			ctx->datalen = 0;
-+		}
-+	}
-+}
-+
-+static void sha256_final(struct sha256_ctx *ctx, uint8_t *hash)
-+{
-+	uint32_t i;
-+
-+	i = ctx->datalen;
-+
-+	/* Pad whatever data is left in the buffer. */
-+	if (ctx->datalen < 56) {
-+		ctx->data[i++] = 0x80;  /* pad 10000000 = 0x80 */
-+		while (i < 56)
-+			ctx->data[i++] = 0x00;
-+	} else {
-+		ctx->data[i++] = 0x80;
-+		while (i < 64)
-+			ctx->data[i++] = 0x00;
-+		sha256_transform(ctx, ctx->data);
-+		memset(ctx->data, 0, 56);
-+	}
-+
-+	/* Append to the padding the total message's length in bits and transform. */
-+	ctx->bitlen += ctx->datalen * 8;
-+	ctx->data[63] = ctx->bitlen;
-+	ctx->data[62] = ctx->bitlen >> 8;
-+	ctx->data[61] = ctx->bitlen >> 16;
-+	ctx->data[60] = ctx->bitlen >> 24;
-+	ctx->data[59] = ctx->bitlen >> 32;
-+	ctx->data[58] = ctx->bitlen >> 40;
-+	ctx->data[57] = ctx->bitlen >> 48;
-+	ctx->data[56] = ctx->bitlen >> 56;
-+	sha256_transform(ctx, ctx->data);
-+
-+	/* copying the final state to the output hash(use big endian). */
-+	for (i = 0; i < 4; ++i) {
-+		hash[i]      = (ctx->state[0] >> (24 - i * 8)) & 0x000000ff;
-+		hash[i + 4]  = (ctx->state[1] >> (24 - i * 8)) & 0x000000ff;
-+		hash[i + 8]  = (ctx->state[2] >> (24 - i * 8)) & 0x000000ff;
-+		hash[i + 12] = (ctx->state[3] >> (24 - i * 8)) & 0x000000ff;
-+		hash[i + 16] = (ctx->state[4] >> (24 - i * 8)) & 0x000000ff;
-+		hash[i + 20] = (ctx->state[5] >> (24 - i * 8)) & 0x000000ff;
-+		hash[i + 24] = (ctx->state[6] >> (24 - i * 8)) & 0x000000ff;
-+		hash[i + 28] = (ctx->state[7] >> (24 - i * 8)) & 0x000000ff;
-+	}
-+}
-+
-+int hmac_sha256(const uint8_t *plaintext, ssize_t psize, uint8_t *output)
-+{
-+	struct sha256_ctx ctx;
-+
-+	sha256_init(&ctx);
-+	sha256_update(&ctx, plaintext, psize);
-+	sha256_final(&ctx, output);
-+	return 0;
-+}
-diff --git a/drivers/misc/sunxi-addr/sunxi-addr.c b/drivers/misc/sunxi-addr/sunxi-addr.c
-new file mode 100644
-index 000000000..a812e4e82
---- /dev/null
-+++ b/drivers/misc/sunxi-addr/sunxi-addr.c
-@@ -0,0 +1,358 @@
-+/*
-+ * The driver of SUNXI NET MAC ADDR Manager.
-+ *
-+ * Copyright (C) 2013 Allwinner.
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+#define DEBUG
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/miscdevice.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+
-+#define ADDR_MGT_DBG(fmt, arg...) printk(KERN_DEBUG "[ADDR_MGT] %s: " fmt "\n",\
-+				__func__, ## arg)
-+#define ADDR_MGT_ERR(fmt, arg...) printk(KERN_ERR "[ADDR_MGT] %s: " fmt "\n",\
-+				__func__, ## arg)
-+
-+#define MODULE_CUR_VERSION  "v1.0.9"
-+
-+#define MATCH_STR_LEN       20
-+#define ADDR_VAL_LEN        6
-+#define ADDR_STR_LEN        18
-+#define ID_LEN              16
-+#define HASH_LEN            32
-+
-+#define TYPE_ANY            0
-+#define TYPE_BURN           1
-+#define TYPE_IDGEN          2
-+#define TYPE_USER           3
-+#define TYPE_RAND           4
-+
-+#define ADDR_FMT_STR        0
-+#define ADDR_FMT_VAL        1
-+
-+#define IS_TYPE_INVALID(x)  ((x < TYPE_ANY) || (x > TYPE_RAND))
-+
-+#define ADDR_CLASS_ATTR_ADD(name) \
-+static ssize_t addr_##name##_show(struct class *class, \
-+		struct class_attribute *attr, char *buffer) \
-+{ \
-+	char addr[ADDR_STR_LEN]; \
-+	if (IS_TYPE_INVALID(get_addr_by_name(ADDR_FMT_STR, addr, #name))) \
-+		return 0; \
-+	return sprintf(buffer, "%.17s\n", addr); \
-+} \
-+static ssize_t addr_##name##_store(struct class *class, \
-+		struct class_attribute *attr, \
-+		const char *buffer, size_t count) \
-+{ \
-+	if (count != ADDR_STR_LEN) { \
-+		ADDR_MGT_ERR("Length wrong."); \
-+		return -EINVAL; \
-+	} \
-+	set_addr_by_name(TYPE_USER, ADDR_FMT_STR, buffer, #name); \
-+	return count; \
-+} \
-+static CLASS_ATTR_RW(addr_##name);
-+
-+struct addr_mgt_info {
-+	unsigned int type_def;
-+	unsigned int type_cur;
-+	unsigned int flag;
-+	char *addr;
-+	char *name;
-+};
-+
-+static struct addr_mgt_info info[] = {
-+	{TYPE_ANY, TYPE_ANY, 1, NULL, "wifi"},
-+	{TYPE_ANY, TYPE_ANY, 0, NULL, "bt"  },
-+	{TYPE_ANY, TYPE_ANY, 1, NULL, "eth" },
-+};
-+
-+extern int hmac_sha256(const uint8_t *plaintext, ssize_t psize, uint8_t *output);
-+extern int sunxi_get_soc_chipid(unsigned char *chipid);
-+
-+static int addr_parse(int fmt, const char *addr, int check)
-+{
-+	char val_buf[ADDR_VAL_LEN];
-+	char cmp_buf[ADDR_VAL_LEN];
-+	int  ret = ADDR_VAL_LEN;
-+
-+	if (fmt == ADDR_FMT_STR)
-+		ret = sscanf(addr, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
-+					&val_buf[0], &val_buf[1], &val_buf[2],
-+					&val_buf[3], &val_buf[4], &val_buf[5]);
-+	else
-+		memcpy(val_buf, addr, ADDR_VAL_LEN);
-+
-+	if (ret != ADDR_VAL_LEN)
-+		return -1;
-+
-+	if (check && (val_buf[0] & 0x3))
-+		return -1;
-+
-+	memset(cmp_buf, 0x00, ADDR_VAL_LEN);
-+	if (memcmp(val_buf, cmp_buf, ADDR_VAL_LEN) == 0)
-+		return -1;
-+
-+	memset(cmp_buf, 0xFF, ADDR_VAL_LEN);
-+	if (memcmp(val_buf, cmp_buf, ADDR_VAL_LEN) == 0)
-+		return -1;
-+
-+	return 0;
-+}
-+
-+static struct addr_mgt_info *addr_find_by_name(char *name)
-+{
-+	int i = 0;
-+	for (i = 0; i < ARRAY_SIZE(info); i++) {
-+		if (strcmp(info[i].name, name) == 0)
-+			return &info[i];
-+	}
-+	return NULL;
-+}
-+
-+static int get_addr_by_name(int fmt, char *addr, char *name)
-+{
-+	struct addr_mgt_info *t;
-+
-+	t = addr_find_by_name(name);
-+	if (t == NULL) {
-+		ADDR_MGT_ERR("can't find addr named: %s", name);
-+		return -1;
-+	}
-+
-+	if (IS_TYPE_INVALID(t->type_cur)) {
-+		ADDR_MGT_ERR("addr type invalid");
-+		return -1;
-+	}
-+
-+	if (addr_parse(ADDR_FMT_VAL, t->addr, t->flag)) {
-+		ADDR_MGT_ERR("addr parse fail(%s)", t->addr);
-+		return -1;
-+	}
-+
-+	if (fmt == ADDR_FMT_STR)
-+		sprintf(addr, "%02X:%02X:%02X:%02X:%02X:%02X",
-+				t->addr[0], t->addr[1], t->addr[2],
-+				t->addr[3], t->addr[4], t->addr[5]);
-+	else
-+		memcpy(addr, t->addr, ADDR_VAL_LEN);
-+
-+	return t->type_cur;
-+}
-+
-+static int set_addr_by_name(int type, int fmt, const char *addr, char *name)
-+{
-+	struct addr_mgt_info *t;
-+
-+	t = addr_find_by_name(name);
-+	if (t == NULL) {
-+		ADDR_MGT_ERR("can't find addr named: %s", name);
-+		return -1;
-+	}
-+
-+	if (addr_parse(fmt, addr, t->flag)) {
-+		ADDR_MGT_ERR("addr parse fail(%s)", addr);
-+		return -1;
-+	}
-+
-+	t->type_cur = type;
-+	if (fmt == ADDR_FMT_STR)
-+		sscanf(addr, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
-+				&t->addr[0], &t->addr[1], &t->addr[2],
-+				&t->addr[3], &t->addr[4], &t->addr[5]);
-+	else
-+		memcpy(t->addr, addr, ADDR_VAL_LEN);
-+
-+	return 0;
-+}
-+
-+int get_custom_mac_address(int fmt, char *name, char *addr)
-+{
-+	return get_addr_by_name(fmt, addr, name);
-+}
-+EXPORT_SYMBOL_GPL(get_custom_mac_address);
-+
-+static int addr_factory(struct device_node *np,
-+			int idx, int type, char *mac, char *name)
-+{
-+	int  ret, i;
-+	char match[MATCH_STR_LEN];
-+	const char *p;
-+	char id[ID_LEN], hash[HASH_LEN], cmp_buf[ID_LEN];
-+	struct timespec64 curtime;
-+
-+	switch (type) {
-+	case TYPE_BURN:
-+		sprintf(match, "addr_%s", name);
-+		ret = of_property_read_string_index(np, match, 0, &p);
-+		if (ret)
-+			return -1;
-+
-+		ret = sscanf(p, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
-+			&mac[0], &mac[1], &mac[2],
-+			&mac[3], &mac[4], &mac[5]);
-+
-+		if (ret != ADDR_VAL_LEN)
-+			return -1;
-+		break;
-+	case TYPE_IDGEN:
-+		if (idx > HASH_LEN / ADDR_VAL_LEN - 1)
-+			return -1;
-+		if (sunxi_get_soc_chipid(id))
-+			return -1;
-+		memset(cmp_buf, 0x00, ID_LEN);
-+		if (memcmp(id, cmp_buf, ID_LEN) == 0)
-+			return -1;
-+		if (hmac_sha256(id, ID_LEN, hash))
-+			return -1;
-+		memcpy(mac, &hash[idx * ADDR_VAL_LEN], ADDR_VAL_LEN);
-+		break;
-+	case TYPE_RAND:
-+		for (i = 0; i < ADDR_VAL_LEN; i++) {
-+			ktime_get_real_ts64(&curtime);
-+			mac[i] = (char)curtime.tv_nsec;
-+		}
-+		break;
-+	default:
-+		ADDR_MGT_ERR("unsupport type: %d", type);
-+		return -1;
-+	}
-+	return 0;
-+}
-+
-+static int addr_init(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node;
-+	int  type, i, j;
-+	char match[MATCH_STR_LEN];
-+	char addr[ADDR_VAL_LEN];
-+	int  type_tab[] = {TYPE_BURN, TYPE_IDGEN, TYPE_RAND};
-+
-+	/* init addr type and value */
-+	for (i = 0; i < ARRAY_SIZE(info); i++) {
-+		sprintf(match, "type_addr_%s", info[i].name);
-+		if (of_property_read_u32(np, match, &type)) {
-+			ADDR_MGT_DBG("Failed to get type_def_%s, use default: %d",
-+						info[i].name, info[i].type_def);
-+		} else {
-+			info[i].type_def = type;
-+			info[i].type_cur = type;
-+		}
-+
-+		if (IS_TYPE_INVALID(info[i].type_def))
-+			return -1;
-+		if (info[i].type_def != TYPE_ANY) {
-+			if (addr_factory(np, i, info[i].type_def, addr, info[i].name))
-+				return -1;
-+		} else {
-+			for (j = 0; j < ARRAY_SIZE(type_tab); j++) {
-+				if (!addr_factory(np, i, type_tab[j], addr, info[i].name)) {
-+					info[i].type_cur = type_tab[j];
-+					break;
-+				}
-+			}
-+		}
-+
-+		if (info[i].flag)
-+			addr[0] &= 0xFC;
-+
-+		if (addr_parse(ADDR_FMT_VAL, addr, info[i].flag))
-+			return -1;
-+		else {
-+			info[i].addr = devm_kzalloc(&pdev->dev, ADDR_VAL_LEN, GFP_KERNEL);
-+			memcpy(info[i].addr, addr, ADDR_VAL_LEN);
-+		}
-+	}
-+	return 0;
-+}
-+
-+static ssize_t summary_show(struct class *class,
-+				struct class_attribute *attr, char *buffer)
-+{
-+	int i = 0, ret = 0;
-+
-+	ret += sprintf(&buffer[ret], "name cfg cur address\n");
-+	for (i = 0; i < ARRAY_SIZE(info); i++) {
-+		ret += sprintf(&buffer[ret],
-+			"%4s  %d   %d  %02X:%02X:%02X:%02X:%02X:%02X\n",
-+			info[i].name,   info[i].type_def, info[i].type_cur,
-+			info[i].addr[0], info[i].addr[1], info[i].addr[2],
-+			info[i].addr[3], info[i].addr[4], info[i].addr[5]);
-+	}
-+	return ret;
-+}
-+static CLASS_ATTR_RO(summary);
-+
-+ADDR_CLASS_ATTR_ADD(wifi);
-+ADDR_CLASS_ATTR_ADD(bt);
-+ADDR_CLASS_ATTR_ADD(eth);
-+
-+static struct attribute *addr_class_attrs[] = {
-+	&class_attr_summary.attr,
-+	&class_attr_addr_wifi.attr,
-+	&class_attr_addr_bt.attr,
-+	&class_attr_addr_eth.attr,
-+	NULL
-+};
-+ATTRIBUTE_GROUPS(addr_class);
-+
-+static struct class addr_class = {
-+	.name = "addr_mgt",
-+	.owner = THIS_MODULE,
-+	.class_groups = addr_class_groups,
-+};
-+
-+static const struct of_device_id addr_mgt_ids[] = {
-+	{ .compatible = "allwinner,sunxi-addr_mgt" },
-+	{ /* Sentinel */ }
-+};
-+
-+static int addr_mgt_probe(struct platform_device *pdev)
-+{
-+	int status;
-+
-+	ADDR_MGT_DBG("module version: %s", MODULE_CUR_VERSION);
-+	status = class_register(&addr_class);
-+	if (status < 0) {
-+		ADDR_MGT_ERR("class register error, status: %d.", status);
-+		return -1;
-+	}
-+
-+	if (addr_init(pdev)) {
-+		ADDR_MGT_ERR("failed to init addr.");
-+		class_unregister(&addr_class);
-+		return -1;
-+	}
-+	ADDR_MGT_DBG("success.");
-+	return 0;
-+}
-+
-+static int addr_mgt_remove(struct platform_device *pdev)
-+{
-+	class_unregister(&addr_class);
-+	return 0;
-+}
-+
-+static struct platform_driver addr_mgt_driver = {
-+	.probe  = addr_mgt_probe,
-+	.remove = addr_mgt_remove,
-+	.driver = {
-+		.owner = THIS_MODULE,
-+		.name  = "sunxi-addr-mgt",
-+		.of_match_table = addr_mgt_ids,
-+	},
-+};
-+
-+module_platform_driver_probe(addr_mgt_driver, addr_mgt_probe);
-+
-+MODULE_AUTHOR("Allwinnertech");
-+MODULE_DESCRIPTION("Network MAC Addess Manager");
-+MODULE_LICENSE("GPL");
--- 
-2.34.1
-

recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0009-dts-add-addr_mgt-device-tree-node.patch

@@ -1,32 +0,0 @@
-From 706dc6ed092e4a1b9d84893cb4186fbd354bb1c8 Mon Sep 17 00:00:00 2001
-From: pbiel <pbiel7@gmail.com>
-Date: Thu, 26 Jan 2023 09:51:22 +0100
-Subject: [PATCH] Add addr_mgt device tree node
-
----
- arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-index d0b95d43a..15f45a3f9 100644
---- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-@@ -591,5 +591,15 @@ sunxi-info {
- 			compatible = "allwinner,sun50i-h616-sys-info";
- 			status = "okay";
- 		};
-+
-+		addr_mgt {
-+			compatible = "allwinner,sunxi-addr_mgt";
-+			type_addr_wifi = <0x00>;
-+			type_addr_bt = <0x00>;
-+			type_addr_eth = <0x00>;
-+			status = "okay";
-+			linux,phandle = <0x179>;
-+			phandle = <0x179>;
-+		};
- 	};
- };
--- 
-2.34.1
-

recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0010-dts-add-wifi-power-regulator.patch

@@ -1,70 +0,0 @@
-From 899da8366afd97b1ca59b632036dc313777026da Mon Sep 17 00:00:00 2001
-From: pbiel <pbiel7@gmail.com>
-Date: Fri, 24 Feb 2023 22:14:58 +0100
-Subject: [PATCH] Add wifi power regulator
-
----
- .../allwinner/sun50i-h616-orangepi-zero2.dts  | 47 +++++++++++++++++++
- 1 file changed, 47 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-index 02893f3ac..88234a139 100644
---- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-@@ -49,6 +49,53 @@ reg_vcc5v: vcc5v {
- 		regulator-max-microvolt = <5000000>;
- 		regulator-always-on;
- 	};
-+
-+	reg_vcc33_wifi: vcc33-wifi {
-+		/* Always on 3.3V regulator for WiFi and BT */
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc33-wifi";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		regulator-always-on;
-+		vin-supply = <&reg_vcc5v>;
-+	};
-+
-+	reg_vcc_wifi_io: vcc-wifi-io {
-+		/* Always on 1.8V/300mA regulator for WiFi and BT IO */
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc-wifi-io";
-+		regulator-min-microvolt = <1800000>;
-+		regulator-max-microvolt = <1800000>;
-+		regulator-always-on;
-+		vin-supply = <&reg_vcc33_wifi>;
-+	};
-+
-+	wifi_pwrseq: wifi-pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		clocks = <&rtc 1>;
-+		clock-names = "osc32k-out";
-+		reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
-+		post-power-on-delay-ms = <200>;
-+	};
-+};
-+
-+&mmc1 {
-+	vmmc-supply = <&reg_vcc33_wifi>;
-+	vqmmc-supply = <&reg_vcc_wifi_io>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	mmc-ddr-1_8v;
-+	status = "okay";
-+	uwe-bsp {
-+		compatible = "unisoc,uwe_bsp";
-+		keep-power-on;
-+		data-irq;
-+		//adma-tx;
-+		adma-rx;
-+		//blksz-512;
-+		status = "okay";
-+	};
- };
- 
- &emac0 {
--- 
-2.34.1
-

recipes-kernel/linux/linux-mainline.inc

@@ -1,40 +0,0 @@
-SECTION = "kernel"
-LICENSE = "GPL-2.0-only"
-LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
-COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
-
-inherit kernel
-
-require linux.inc
-
-# Since we're not using git, this doesn't make a difference, but we need to fill
-# in something or kernel-yocto.bbclass will fail.
-KBRANCH ?= "master"
-
-DEPENDS += "rsync-native"
-
-# Pull in the devicetree files into the rootfs
-RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"
-
-KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
-
-S = "${WORKDIR}/linux-${PV}"
-
-# get release version 5.x or 6.x based on version
-KRELEASE = "${@d.getVar('PV', True).split('.')[0]}"
-
-SRC_URI = "https://www.kernel.org/pub/linux/kernel/v${KRELEASE}.x/linux-${PV}.tar.xz \
-	file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
-	file://0002-dts-nanopi-neo-air-add-camera.patch \
-	file://0003-dts-allwinner-bananapi-m2-zreo-Enforce-consistent-MM.patch \
-	file://0004-dts-allwinner-bananapi-m64-Consistent-nodes-for-mmc-devices.patch \
-	file://defconfig \
-"
-
-SRC_URI:append:use-mailine-graphics = " file://drm.cfg"
-SRC_URI:append:bananapi = " file://axp20x.cfg"
-SRC_URI:append:bananapi-m2-zero = " file://axp20x.cfg"
-SRC_URI:append:cubietruck = " file://axp20x.cfg"
-SRC_URI:append:nanopi-neo-air = " file://cam500b.cfg"
-
-FILES_${KERNEL_PACKAGE_NAME}-base:append = " ${nonarch_base_libdir}/modules/${KERNEL_VERSION}/modules.builtin.modinfo"

recipes-kernel/linux/linux-mainline/0001-dts-orange-pi-zero-Add-wifi-support.patch

@@ -1,87 +0,0 @@
-diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
-index 84cd9c061..917986cce 100644
---- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
-+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
-@@ -80,13 +80,15 @@
- 		};
- 	};
- 
--	reg_vcc_wifi: reg_vcc_wifi {
-+	vdd_wifi: vdd_wifi {
- 		compatible = "regulator-fixed";
--		regulator-min-microvolt = <3300000>;
--		regulator-max-microvolt = <3300000>;
--		regulator-name = "vcc-wifi";
--		enable-active-high;
-+		regulator-name = "wifi";
-+		regulator-min-microvolt = <1800000>;
-+		regulator-max-microvolt = <1800000>;
- 		gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
-+		startup-delay-us = <70000>;
-+		enable-active-high;
-+
- 	};
- 
- 	reg_vdd_cpux: vdd-cpux-regulator {
-@@ -106,10 +108,12 @@
- 			  1300000 1>;
- 	};
- 
--	wifi_pwrseq: wifi_pwrseq {
-+	pwrseq_wifi: pwrseq_wifi {
- 		compatible = "mmc-pwrseq-simple";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&wifi_rst>;
- 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
--		post-power-on-delay-ms = <200>;
-+		post-power-on-delay-ms = <50>;
- 	};
- };
- 
-@@ -140,9 +144,11 @@
- };
- 
- &mmc1 {
--	vmmc-supply = <&reg_vcc_wifi>;
--	mmc-pwrseq = <&wifi_pwrseq>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	vqmmc-supply = <&vdd_wifi>;
-+	mmc-pwrseq = <&pwrseq_wifi>;
- 	bus-width = <4>;
-+	max-frequency = <16000000>;
- 	non-removable;
- 	status = "okay";
- 
-@@ -152,6 +158,13 @@
- 	 */
- 	xr819: sdio_wifi@1 {
- 		reg = <1>;
-+		compatible = "xradio,xr819";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&wifi_wake>;
-+		interrupt-parent = <&pio>;
-+		interrupts = <6 10 IRQ_TYPE_EDGE_RISING>;
-+		interrupt-names = "host-wake";
-+		local-mac-address = [dc 44 6d c0 ff ee];
- 	};
- };
- 
-@@ -208,3 +221,18 @@
- 	status = "okay";
- 	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
- };
-+
-+&pio {
-+	wifi_wake: wifi_wake {
-+		pins = "PG10";
-+		function = "gpio_in";
-+    };
-+};
-+
-+&r_pio {
-+	wifi_rst: wifi_rst {
-+		pins = "PL7";
-+		function = "gpio_out";
-+    };
-+};
-+

recipes-kernel/linux/linux-mainline/0002-dts-nanopi-neo-air-add-camera.patch

@@ -1,101 +0,0 @@
-diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
-index cd3df12b65..33a161692f 100644
---- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
-+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
-@@ -77,6 +77,39 @@
- 		compatible = "mmc-pwrseq-simple";
- 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
- 	};
-+
-+        cam_xclk: cam-xclk {
-+                #clock-cells = <0>;
-+                compatible = "fixed-clock";
-+                clock-frequency = <24000000>;
-+                clock-output-names = "cam-xclk";
-+        };
-+
-+        reg_cam_avdd: cam-avdd {
-+                compatible = "regulator-fixed";
-+                regulator-name = "cam-avdd";
-+                regulator-min-microvolt = <2800000>;
-+                regulator-max-microvolt = <2800000>;
-+                vin-supply = <&reg_vcc3v3>;
-+        };
-+
-+        reg_cam_dovdd: cam-dovdd {
-+                compatible = "regulator-fixed";
-+                regulator-name = "cam-dovdd";
-+                regulator-min-microvolt = <1800000>;
-+                regulator-max-microvolt = <1800000>;
-+                vin-supply = <&reg_vcc3v3>;
-+        };
-+
-+        reg_cam_dvdd: cam-dvdd {
-+                compatible = "regulator-fixed";
-+                regulator-name = "cam-dvdd";
-+                regulator-min-microvolt = <1500000>;
-+                regulator-max-microvolt = <1500000>;
-+                vin-supply = <&reg_vcc3v3>;
-+        };
-+
-+
- };
- 
- &mmc0 {
-@@ -141,3 +174,55 @@
- 	/* USB VBUS is always on */
- 	status = "okay";
- };
-+
-+&csi {
-+    status = "okay";
-+
-+    port {
-+        #address-cells = <1>;
-+        #size-cells = <0>;
-+
-+        /* Parallel bus endpoint */
-+        csi_from_ov5640: endpoint {
-+            remote-endpoint = <&ov5640_to_csi>;
-+            bus-width = <8>;
-+            data-shift = <2>;
-+            hsync-active = <1>; /* Active high */
-+            vsync-active = <0>; /* Active low */
-+            data-active = <1>;  /* Active high */
-+            pclk-sample = <1>;  /* Rising */
-+        };
-+    };
-+};
-+
-+&i2c2 {
-+   status = "okay";
-+
-+   ov5640: camera@3c {
-+        compatible = "ovti,ov5640";
-+        reg = <0x3c>;
-+        clocks = <&cam_xclk>;
-+        clock-names = "xclk";
-+
-+        reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>;
-+        powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>;
-+        AVDD-supply = <&reg_cam_avdd>;
-+        DOVDD-supply = <&reg_cam_dovdd>;
-+        DVDD-supply = <&reg_cam_dvdd>;
-+
-+        port {
-+            ov5640_to_csi: endpoint {
-+                remote-endpoint = <&csi_from_ov5640>;
-+                bus-width = <8>;
-+                data-shift = <2>;
-+                hsync-active = <1>; /* Active high */
-+                vsync-active = <0>; /* Active low */
-+                data-active = <1>;  /* Active high */
-+                pclk-sample = <1>;  /* Rising */
-+            };
-+        };
-+    };
-+};
-+&i2c2_pins {
-+   bias-pull-up;
-+};
-

recipes-kernel/linux/linux-mainline/0003-dts-allwinner-bananapi-m2-zreo-Enforce-consistent-MM.patch

@@ -1,28 +0,0 @@
-From 9b4baa9b5aab0511c46a1ae95485e1a3ea984352 Mon Sep 17 00:00:00 2001
-From: matteolel <matteolel91@hotmail.it>
-Date: Fri, 9 Dec 2022 16:38:11 +0000
-Subject: [PATCH] dts: allwinner: bananapi-m2-zreo: Enforce consistent MMC
- numbering
-
-Enforce MMC number (sometimes the order was wrong and the device does not boot).
----
- arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 3 +++
- 1 file changed, 3 insertions(+)
-
-diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
-index 8e8634ff2..37a2ed937 100644
---- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
-+++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
-@@ -20,6 +20,9 @@ / {
- 	aliases {
- 		serial0 = &uart0;
- 		serial1 = &uart1;
-+		mmc0 = &mmc0;
-+		mmc1 = &mmc1;
-+		mmc2 = &mmc2;
- 	};
- 
- 	chosen {
--- 
-2.25.1
-

recipes-kernel/linux/linux-mainline/0004-dts-allwinner-bananapi-m64-Consistent-nodes-for-mmc-devices.patch

@@ -1,27 +0,0 @@
-From f487f62babb11d014da7a0b58a0fcdf6d217a812 Mon Sep 17 00:00:00 2001
-From: Marek Belisko <marek.belisko@open-nandra.com>
-Date: Thu, 11 May 2023 11:18:33 +0200
-Subject: [PATCH] bananapi-m64: Consistent nodes for mmc devices
-
-Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
----
- arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts | 3 +++
- 1 file changed, 3 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
-index e6d5bc0f7..39a28aad8 100644
---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
-@@ -16,6 +16,9 @@ aliases {
- 		ethernet0 = &emac;
- 		serial0 = &uart0;
- 		serial1 = &uart1;
-+                mmc0 = &mmc0;
-+                mmc1 = &mmc1;
-+                mmc2 = &mmc2;
- 	};
- 
- 	chosen {
--- 
-2.25.1
-

recipes-kernel/linux/linux-mainline/aarch64/defconfig

@@ -1,620 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_AUDIT=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IRQ_TIME_ACCOUNTING=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_NUMA_BALANCING=y
-CONFIG_MEMCG=y
-CONFIG_MEMCG_SWAP=y
-CONFIG_BLK_CGROUP=y
-CONFIG_CGROUP_PIDS=y
-CONFIG_CGROUP_HUGETLB=y
-CONFIG_CPUSETS=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_PERF=y
-CONFIG_USER_NS=y
-CONFIG_SCHED_AUTOGROUP=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_PROFILING=y
-CONFIG_JUMP_LABEL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_ARCH_SUNXI=y
-CONFIG_ARCH_ALPINE=y
-CONFIG_ARCH_BCM2835=y
-CONFIG_ARCH_BCM_IPROC=y
-CONFIG_ARCH_BERLIN=y
-CONFIG_ARCH_BRCMSTB=y
-CONFIG_ARCH_EXYNOS=y
-CONFIG_ARCH_LAYERSCAPE=y
-CONFIG_ARCH_LG1K=y
-CONFIG_ARCH_HISI=y
-CONFIG_ARCH_MEDIATEK=y
-CONFIG_ARCH_MESON=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_ARCH_QCOM=y
-CONFIG_ARCH_ROCKCHIP=y
-CONFIG_ARCH_SEATTLE=y
-CONFIG_ARCH_RENESAS=y
-CONFIG_ARCH_R8A7795=y
-CONFIG_ARCH_R8A7796=y
-CONFIG_ARCH_STRATIX10=y
-CONFIG_ARCH_TEGRA=y
-CONFIG_ARCH_SPRD=y
-CONFIG_ARCH_THUNDER=y
-CONFIG_ARCH_THUNDER2=y
-CONFIG_ARCH_UNIPHIER=y
-CONFIG_ARCH_VEXPRESS=y
-CONFIG_ARCH_XGENE=y
-CONFIG_ARCH_ZX=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_PCI=y
-CONFIG_HOTPLUG_PCI_PCIE=y
-CONFIG_PCI_IOV=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_ACPI=y
-CONFIG_PCI_LAYERSCAPE=y
-CONFIG_PCI_HISI=y
-CONFIG_PCIE_QCOM=y
-CONFIG_PCIE_KIRIN=y
-CONFIG_PCIE_ARMADA_8K=y
-CONFIG_PCI_AARDVARK=y
-CONFIG_PCIE_RCAR=y
-CONFIG_PCIE_ROCKCHIP=m
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_PCI_XGENE=y
-CONFIG_ARM64_VA_BITS_48=y
-CONFIG_SCHED_MC=y
-CONFIG_NUMA=y
-CONFIG_PREEMPT=y
-CONFIG_KSM=y
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_CMA=y
-CONFIG_SECCOMP=y
-CONFIG_KEXEC=y
-CONFIG_CRASH_DUMP=y
-CONFIG_XEN=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_COMPAT=y
-CONFIG_HIBERNATION=y
-CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
-CONFIG_ARM_CPUIDLE=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_ARM_BIG_LITTLE_CPUFREQ=y
-CONFIG_ARM_SCPI_CPUFREQ=y
-CONFIG_ACPI_CPPC_CPUFREQ=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IPV6=m
-CONFIG_NETFILTER=y
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
-CONFIG_NETFILTER_XT_TARGET_LOG=m
-CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_NAT=m
-CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_BRIDGE=m
-CONFIG_BRIDGE_VLAN_FILTERING=y
-CONFIG_VLAN_8021Q=m
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_VLAN_8021Q_MVRP=y
-CONFIG_BPF_JIT=y
-CONFIG_BT=m
-CONFIG_BT_HIDP=m
-# CONFIG_BT_HS is not set
-# CONFIG_BT_LE is not set
-CONFIG_BT_LEDS=y
-# CONFIG_BT_DEBUGFS is not set
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_LL=y
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_PRIV=y
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_MAC80211_LEDS=y
-CONFIG_RFKILL=m
-CONFIG_NET_9P=y
-CONFIG_NET_9P_VIRTIO=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_DMA_CMA=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_DENALI_DT=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=m
-CONFIG_VIRTIO_BLK=y
-CONFIG_BLK_DEV_NVME=m
-CONFIG_SRAM=y
-CONFIG_EEPROM_AT25=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_SAS_ATA=y
-CONFIG_SCSI_HISI_SAS=y
-CONFIG_SCSI_HISI_SAS_PCI=y
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_AHCI_CEVA=y
-CONFIG_AHCI_MVEBU=y
-CONFIG_AHCI_XGENE=y
-CONFIG_AHCI_QORIQ=y
-CONFIG_SATA_SIL24=y
-CONFIG_SATA_RCAR=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_PATA_OF_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_MACVLAN=m
-CONFIG_MACVTAP=m
-CONFIG_TUN=y
-CONFIG_VETH=m
-CONFIG_VIRTIO_NET=y
-CONFIG_AMD_XGBE=y
-CONFIG_NET_XGENE=y
-CONFIG_MACB=y
-CONFIG_HNS_DSAF=y
-CONFIG_HNS_ENET=y
-CONFIG_E1000E=y
-CONFIG_IGB=y
-CONFIG_IGBVF=y
-CONFIG_MVNETA=y
-CONFIG_MVPP2=y
-CONFIG_SKY2=y
-CONFIG_QCOM_EMAC=m
-CONFIG_RAVB=y
-CONFIG_SMC91X=y
-CONFIG_SMSC911X=y
-CONFIG_STMMAC_ETH=m
-CONFIG_MDIO_BUS_MUX_MMIOREG=y
-CONFIG_AT803X_PHY=m
-CONFIG_MARVELL_PHY=m
-CONFIG_MESON_GXL_PHY=m
-CONFIG_MICREL_PHY=y
-CONFIG_REALTEK_PHY=m
-CONFIG_ROCKCHIP_PHY=y
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_RTL8152=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_SR9800=m
-CONFIG_USB_NET_SMSC75XX=m
-CONFIG_USB_NET_SMSC95XX=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_BRCMFMAC=m
-CONFIG_WL18XX=m
-CONFIG_WLCORE_SDIO=m
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_ADC=m
-CONFIG_KEYBOARD_CROS_EC=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_PM8941_PWRKEY=y
-CONFIG_INPUT_HISI_POWERKEY=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_BCM2835AUX=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_MT6577=y
-CONFIG_SERIAL_8250_UNIPHIER=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_MESON=y
-CONFIG_SERIAL_MESON_CONSOLE=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_TEGRA=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=11
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_MSM=y
-CONFIG_SERIAL_MSM_CONSOLE=y
-CONFIG_SERIAL_XILINX_PS_UART=y
-CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
-CONFIG_SERIAL_MVEBU_UART=y
-CONFIG_SERIAL_DEV_BUS=y
-CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_I2C_BCM2835=m
-CONFIG_I2C_DESIGNWARE_PLATFORM=y
-CONFIG_I2C_IMX=y
-CONFIG_I2C_MESON=y
-CONFIG_I2C_MV64XXX=y
-CONFIG_I2C_PXA=y
-CONFIG_I2C_QUP=y
-CONFIG_I2C_RK3X=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_I2C_TEGRA=y
-CONFIG_I2C_UNIPHIER_F=y
-CONFIG_I2C_RCAR=y
-CONFIG_I2C_CROS_EC_TUNNEL=y
-CONFIG_SPI=y
-CONFIG_SPI_MESON_SPICC=m
-CONFIG_SPI_MESON_SPIFC=m
-CONFIG_SPI_BCM2835=m
-CONFIG_SPI_BCM2835AUX=m
-CONFIG_SPI_ORION=y
-CONFIG_SPI_PL022=y
-CONFIG_SPI_QUP=y
-CONFIG_SPI_ROCKCHIP=y
-CONFIG_SPI_S3C64XX=y
-CONFIG_SPI_SPIDEV=m
-CONFIG_SPMI=y
-CONFIG_PINCTRL_IPQ8074=y
-CONFIG_PINCTRL_SINGLE=y
-CONFIG_PINCTRL_MAX77620=y
-CONFIG_PINCTRL_MSM8916=y
-CONFIG_PINCTRL_MSM8994=y
-CONFIG_PINCTRL_MSM8996=y
-CONFIG_PINCTRL_QDF2XXX=y
-CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
-CONFIG_GPIO_DWAPB=y
-CONFIG_GPIO_PL061=y
-CONFIG_GPIO_RCAR=y
-CONFIG_GPIO_XGENE=y
-CONFIG_GPIO_XGENE_SB=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_GPIO_MAX77620=y
-CONFIG_POWER_RESET_MSM=y
-CONFIG_POWER_RESET_XGENE=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_SYSCON_REBOOT_MODE=y
-CONFIG_BATTERY_BQ27XXX=y
-CONFIG_SENSORS_ARM_SCPI=y
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_INA2XX=m
-CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
-CONFIG_CPU_THERMAL=y
-CONFIG_THERMAL_EMULATION=y
-CONFIG_BRCMSTB_THERMAL=m
-CONFIG_EXYNOS_THERMAL=y
-CONFIG_ROCKCHIP_THERMAL=m
-CONFIG_WATCHDOG=y
-CONFIG_S3C2410_WATCHDOG=y
-CONFIG_MESON_GXBB_WATCHDOG=m
-CONFIG_MESON_WATCHDOG=m
-CONFIG_RENESAS_WDT=y
-CONFIG_UNIPHIER_WATCHDOG=y
-CONFIG_BCM2835_WDT=y
-CONFIG_MFD_AXP20X_RSB=y
-CONFIG_MFD_CROS_EC=y
-CONFIG_MFD_CROS_EC_I2C=y
-CONFIG_MFD_CROS_EC_SPI=y
-CONFIG_MFD_EXYNOS_LPASS=m
-CONFIG_MFD_HI6421_PMIC=y
-CONFIG_MFD_HI655X_PMIC=y
-CONFIG_MFD_MAX77620=y
-CONFIG_MFD_SPMI_PMIC=y
-CONFIG_MFD_RK808=y
-CONFIG_MFD_SEC_CORE=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_AXP20X=y
-CONFIG_REGULATOR_FAN53555=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_REGULATOR_HI6421V530=y
-CONFIG_REGULATOR_HI655X=y
-CONFIG_REGULATOR_MAX77620=y
-CONFIG_REGULATOR_PWM=y
-CONFIG_REGULATOR_QCOM_SMD_RPM=y
-CONFIG_REGULATOR_QCOM_SPMI=y
-CONFIG_REGULATOR_RK808=y
-CONFIG_REGULATOR_S2MPS11=y
-CONFIG_MEDIA_SUPPORT=m
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
-CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
-CONFIG_MEDIA_CONTROLLER=y
-CONFIG_MEDIA_RC_SUPPORT=y
-CONFIG_RC_CORE=m
-CONFIG_RC_DEVICES=y
-CONFIG_RC_DECODERS=y
-CONFIG_IR_MESON=m
-CONFIG_VIDEO_V4L2_SUBDEV_API=y
-# CONFIG_DVB_NET is not set
-CONFIG_V4L_MEM2MEM_DRIVERS=y
-CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
-CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
-CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
-CONFIG_VIDEO_RENESAS_FCP=m
-CONFIG_VIDEO_RENESAS_VSP1=m
-CONFIG_DRM=m
-CONFIG_DRM_NOUVEAU=m
-CONFIG_DRM_EXYNOS=m
-CONFIG_DRM_EXYNOS5433_DECON=y
-CONFIG_DRM_EXYNOS7_DECON=y
-CONFIG_DRM_EXYNOS_DSI=y
-# CONFIG_DRM_EXYNOS_DP is not set
-CONFIG_DRM_EXYNOS_HDMI=y
-CONFIG_DRM_EXYNOS_MIC=y
-CONFIG_DRM_ROCKCHIP=m
-CONFIG_ROCKCHIP_ANALOGIX_DP=y
-CONFIG_ROCKCHIP_CDN_DP=y
-CONFIG_ROCKCHIP_DW_HDMI=y
-CONFIG_ROCKCHIP_DW_MIPI_DSI=y
-CONFIG_ROCKCHIP_INNO_HDMI=y
-CONFIG_DRM_RCAR_DU=m
-CONFIG_DRM_RCAR_LVDS=y
-CONFIG_DRM_RCAR_VSP=y
-CONFIG_DRM_TEGRA=m
-CONFIG_DRM_PANEL_SIMPLE=m
-CONFIG_DRM_I2C_ADV7511=m
-CONFIG_DRM_VC4=m
-CONFIG_DRM_HISI_KIRIN=m
-CONFIG_DRM_MESON=m
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_BACKLIGHT_GENERIC=m
-CONFIG_BACKLIGHT_PWM=m
-CONFIG_BACKLIGHT_LP855X=m
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SOC=y
-CONFIG_SND_BCM2835_SOC_I2S=m
-CONFIG_SND_SOC_SAMSUNG=y
-CONFIG_SND_SOC_RCAR=m
-CONFIG_SND_SOC_AK4613=m
-CONFIG_SND_SIMPLE_CARD=y
-CONFIG_USB=y
-CONFIG_USB_OTG=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_TEGRA=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MSM=y
-CONFIG_USB_EHCI_EXYNOS=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_EXYNOS=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_RENESAS_USBHS=m
-CONFIG_USB_STORAGE=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC2=y
-CONFIG_USB_CHIPIDEA=y
-CONFIG_USB_CHIPIDEA_UDC=y
-CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_ISP1760=y
-CONFIG_USB_HSIC_USB3503=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_USB_MSM_OTG=y
-CONFIG_USB_QCOM_8X16_PHY=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_RENESAS_USBHS_UDC=m
-CONFIG_USB_MUSB_HDRC=y
-# Restrict to host mode, as it is hard-coded that way in the device tree
-# (dr_mode = "host" in the &usb_otg node)
-CONFIG_USB_MUSB_HOST=y
-CONFIG_USB_MUSB_SUNXI=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK_MINORS=32
-CONFIG_MMC_ARMMMCI=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ACPI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_OF_ARASAN=y
-CONFIG_MMC_SDHCI_OF_ESDHC=y
-CONFIG_MMC_SDHCI_CADENCE=y
-CONFIG_MMC_SDHCI_TEGRA=y
-CONFIG_MMC_MESON_GX=y
-CONFIG_MMC_SDHCI_MSM=y
-CONFIG_MMC_SPI=y
-CONFIG_MMC_SDHI=y
-CONFIG_MMC_DW=y
-CONFIG_MMC_DW_EXYNOS=y
-CONFIG_MMC_DW_K3=y
-CONFIG_MMC_DW_ROCKCHIP=y
-CONFIG_MMC_SUNXI=y
-CONFIG_MMC_BCM2835=y
-CONFIG_MMC_SDHCI_XENON=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PWM=y
-CONFIG_LEDS_SYSCON=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_EDAC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_MAX77686=y
-CONFIG_RTC_DRV_RK808=m
-CONFIG_RTC_DRV_S5M=y
-CONFIG_RTC_DRV_DS3232=y
-CONFIG_RTC_DRV_EFI=y
-CONFIG_RTC_DRV_S3C=y
-CONFIG_RTC_DRV_PL031=y
-CONFIG_RTC_DRV_SUN6I=y
-CONFIG_RTC_DRV_TEGRA=y
-CONFIG_RTC_DRV_XGENE=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_BCM2835=m
-CONFIG_K3_DMA=y
-CONFIG_MV_XOR_V2=y
-CONFIG_PL330_DMA=y
-CONFIG_TEGRA20_APB_DMA=y
-CONFIG_QCOM_BAM_DMA=y
-CONFIG_QCOM_HIDMA_MGMT=y
-CONFIG_QCOM_HIDMA=y
-CONFIG_RCAR_DMAC=y
-CONFIG_VFIO=y
-CONFIG_VFIO_PCI=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_BALLOON=y
-CONFIG_VIRTIO_MMIO=y
-CONFIG_XEN_GNTDEV=y
-CONFIG_XEN_GRANT_DEV_ALLOC=y
-CONFIG_STAGING=y
-CONFIG_RTL8723BS=m
-CONFIG_COMMON_CLK_RK808=y
-CONFIG_COMMON_CLK_SCPI=y
-CONFIG_COMMON_CLK_CS2000_CP=y
-CONFIG_COMMON_CLK_S2MPS11=y
-CONFIG_CLK_QORIQ=y
-CONFIG_COMMON_CLK_PWM=y
-CONFIG_COMMON_CLK_QCOM=y
-CONFIG_QCOM_CLK_SMD_RPM=y
-CONFIG_IPQ_GCC_8074=y
-CONFIG_MSM_GCC_8916=y
-CONFIG_MSM_GCC_8994=y
-CONFIG_MSM_MMCC_8996=y
-CONFIG_HWSPINLOCK=y
-CONFIG_HWSPINLOCK_QCOM=y
-CONFIG_ARM_MHU=y
-CONFIG_PLATFORM_MHU=y
-CONFIG_BCM2835_MBOX=y
-CONFIG_HI6220_MBOX=y
-CONFIG_ROCKCHIP_IOMMU=y
-CONFIG_ARM_SMMU=y
-CONFIG_ARM_SMMU_V3=y
-CONFIG_RPMSG_QCOM_SMD=y
-CONFIG_RASPBERRYPI_POWER=y
-CONFIG_QCOM_SMEM=y
-CONFIG_QCOM_SMD_RPM=y
-CONFIG_QCOM_SMP2P=y
-CONFIG_QCOM_SMSM=y
-CONFIG_ROCKCHIP_PM_DOMAINS=y
-CONFIG_ARCH_TEGRA_132_SOC=y
-CONFIG_ARCH_TEGRA_210_SOC=y
-CONFIG_ARCH_TEGRA_186_SOC=y
-CONFIG_EXTCON_USB_GPIO=y
-CONFIG_IIO=y
-CONFIG_EXYNOS_ADC=y
-CONFIG_ROCKCHIP_SARADC=m
-CONFIG_PWM=y
-CONFIG_PWM_BCM2835=m
-CONFIG_PWM_CROS_EC=m
-CONFIG_PWM_MESON=m
-CONFIG_PWM_ROCKCHIP=y
-CONFIG_PWM_SAMSUNG=y
-CONFIG_PWM_TEGRA=m
-CONFIG_PHY_RCAR_GEN3_USB2=y
-CONFIG_PHY_HI6220_USB=y
-CONFIG_PHY_SUN4I_USB=y
-CONFIG_PHY_ROCKCHIP_INNO_USB2=y
-CONFIG_PHY_ROCKCHIP_EMMC=y
-CONFIG_PHY_ROCKCHIP_PCIE=m
-CONFIG_PHY_XGENE=y
-CONFIG_PHY_TEGRA_XUSB=y
-CONFIG_QCOM_L2_PMU=y
-CONFIG_QCOM_L3_PMU=y
-CONFIG_TEE=y
-CONFIG_OPTEE=y
-CONFIG_ARM_SCPI_PROTOCOL=y
-CONFIG_RASPBERRYPI_FIRMWARE=y
-CONFIG_EFI_CAPSULE_LOADER=y
-CONFIG_ACPI=y
-CONFIG_ACPI_APEI=y
-CONFIG_ACPI_APEI_GHES=y
-CONFIG_ACPI_APEI_PCIEAER=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_BTRFS_FS=m
-CONFIG_BTRFS_FS_POSIX_ACL=y
-CONFIG_FANOTIFY=y
-CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
-CONFIG_QUOTA=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=m
-CONFIG_CUSE=m
-CONFIG_OVERLAY_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_HUGETLBFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_EFIVAR_FS=y
-CONFIG_SQUASHFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_NFS_V4_2=y
-CONFIG_ROOT_NFS=y
-CONFIG_9P_FS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_KVM=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOCKUP_DETECTOR=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_FTRACE is not set
-CONFIG_MEMTEST=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_ECHAINIV=y
-CONFIG_CRYPTO_ANSI_CPRNG=y
-CONFIG_ARM64_CRYPTO=y
-CONFIG_CRYPTO_SHA256_ARM64=m
-CONFIG_CRYPTO_SHA512_ARM64=m
-CONFIG_CRYPTO_SHA1_ARM64_CE=y
-CONFIG_CRYPTO_SHA2_ARM64_CE=y
-CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m
-CONFIG_CRYPTO_CRC32_ARM64_CE=m
-CONFIG_CRYPTO_AES_ARM64=m
-CONFIG_CRYPTO_AES_ARM64_CE=m
-CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
-CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-CONFIG_CRYPTO_AES_ARM64_NEON_BLK=m
-CONFIG_CRYPTO_CHACHA20_NEON=m
-CONFIG_CRYPTO_AES_ARM64_BS=m

recipes-kernel/linux/linux-mainline/axp20x.cfg

@@ -1,4 +0,0 @@
-CONFIG_MFD_AXP20X_I2C=y
-CONFIG_MFD_AXP20X=y
-CONFIG_IIO=y
-CONFIG_AXP20X_POWER=y

recipes-kernel/linux/linux-mainline/cam500b.cfg

@@ -1,6 +0,0 @@
-CONFIG_MEDIA_PLATFORM_SUPPORT=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
-
-CONFIG_VIDEO_OV5640=m
-CONFIG_VIDEO_SUN6I_CSI=m
-CONFIG_VIDEO_V4L2=m

recipes-kernel/linux/linux-mainline/drm.cfg

@@ -1,9 +0,0 @@
-CONFIG_DRM=y
-CONFIG_DRM_SUN4I=y
-CONFIG_DRM_SUN8I_DW_HDMI=y
-CONFIG_DRM_SUN8I_MIXER=y
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_DRM_LIMA=y
-CONFIG_DRM_PANFROST=y
-CONFIG_CMA=y
-CONFIG_DMA_CMA=y

recipes-kernel/linux/linux-mainline_5.10.166.bb

@@ -1,7 +0,0 @@
-require linux-mainline.inc
-
-DESCRIPTION = "Mainline Longterm Linux kernel"
-
-LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46"
-
-SRC_URI[sha256sum] = "0051a1780e5bda0efc68dafab7c728b8283d2b028fedb439418f478be7d3e1af"

recipes-kernel/linux/linux-mainline_5.15.91.bb

@@ -1,7 +0,0 @@
-require linux-mainline.inc
-
-DESCRIPTION = "Mainline Longterm Linux kernel"
-
-LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46"
-
-SRC_URI[sha256sum] = "a63c2bb1beb15f1aea9c63cf80559f5b7ab58afd2da2fa5e7670c515ebe1fe80"

recipes-kernel/linux/linux-mainline_5.4.230.bb

@@ -1,7 +0,0 @@
-require linux-mainline.inc
-
-DESCRIPTION = "Mainline Longterm Linux kernel"
-
-LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
-
-SRC_URI[sha256sum] = "a74fd32ccc1025b72f3ba7183208761f7c6190fb96e8f484f6d543a5a183e62f"

recipes-kernel/linux/linux-mainline_6.1.9.bb

@@ -1,21 +0,0 @@
-require linux-mainline.inc
-
-DESCRIPTION = "Mainline Longterm Linux kernel"
-
-LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46"
-
-SRC_URI[sha256sum] = "d60cf185693c386e7acd9f3eb3a94ae30ffbfee0a9447a20e83711e0bdf5922b"
-
-SRC_URI:append:orange-pi-zero2  = " \
-        file://defconfig \
-        file://0001-drv-wireless-add-uwe5622-wifi-driver.patch \
-        file://0002-drv-wireless-driver-for-uwe5622-allwinner-bugfix.patch \
-        file://0003-drv-fix-incldue-path-for-unisocwcn.patch \
-        file://0004-drv-wireless-adapt-uwe5622-wifi-driver-to-kernel-6.1.patch \
-        file://0005-drv-fix-setting-mac-address-for-netdev-in-uwe5622.patch \
-        file://0006-drv-add-dump_reg-and-sunxi-sysinfo-drivers.patch \
-        file://0007-drv-add-sunxi_get_soc_chipid-and-sunxi_get_serial.patch \
-        file://0008-drv-add-sunxi-addr-driver.patch \
-        file://0009-dts-add-addr_mgt-device-tree-node.patch \
-        file://0010-dts-add-wifi-power-regulator.patch \
-"

recipes-kernel/linux/linux-sunxi/0001-compiler-gcc-integrate-the-various-compiler-gcc-345-.patch

@@ -1,276 +0,0 @@
-From a66aaac889f09425ff0f3ddb27aca46ae02d6eea Mon Sep 17 00:00:00 2001
-From: Joe Perches <joe@perches.com>
-Date: Thu, 25 Jun 2015 15:01:02 -0700
-Subject: [PATCH] compiler-gcc: integrate the various compiler-gcc[345].h files
-
-As gcc major version numbers are going to advance rather rapidly in the
-future, there's no real value in separate files for each compiler
-version.
-
-Deduplicate some of the macros #defined in each file too.
-
-Neaten comments using normal kernel commenting style.
-
-Upstream-Status: Backport
-
-Signed-off-by: Joe Perches <joe@perches.com>
-Cc: Andi Kleen <andi@firstfloor.org>
-Cc: Michal Marek <mmarek@suse.cz>
-Cc: Segher Boessenkool <segher@kernel.crashing.org>
-Cc: Sasha Levin <levinsasha928@gmail.com>
-Cc: Anton Blanchard <anton@samba.org>
-Cc: Alan Modra <amodra@gmail.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-Signed-off-by: Jonathan Liu <net147@gmail.com>
----
- include/linux/compiler-gcc.h  | 120 ++++++++++++++++++++++++++++++++++++++++--
- include/linux/compiler-gcc3.h |  23 --------
- include/linux/compiler-gcc4.h |  74 --------------------------
- 3 files changed, 116 insertions(+), 101 deletions(-)
- delete mode 100644 include/linux/compiler-gcc3.h
- delete mode 100644 include/linux/compiler-gcc4.h
-
-diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
-index 7970e31..727add9 100644
---- a/include/linux/compiler-gcc.h
-+++ b/include/linux/compiler-gcc.h
-@@ -97,10 +97,122 @@
- #define __maybe_unused			__attribute__((unused))
- #define __always_unused			__attribute__((unused))
- 
--#define __gcc_header(x) #x
--#define _gcc_header(x) __gcc_header(linux/compiler-gcc##x.h)
--#define gcc_header(x) _gcc_header(x)
--#include gcc_header(__GNUC__)
-+/* gcc version specific checks */
-+
-+#if GCC_VERSION < 30200
-+# error Sorry, your compiler is too old - please upgrade it.
-+#endif
-+
-+#if GCC_VERSION < 30300
-+# define __used			__attribute__((__unused__))
-+#else
-+# define __used			__attribute__((__used__))
-+#endif
-+
-+#ifdef CONFIG_GCOV_KERNEL
-+# if GCC_VERSION < 30400
-+#   error "GCOV profiling support for gcc versions below 3.4 not included"
-+# endif /* __GNUC_MINOR__ */
-+#endif /* CONFIG_GCOV_KERNEL */
-+
-+#if GCC_VERSION >= 30400
-+#define __must_check		__attribute__((warn_unused_result))
-+#endif
-+
-+#if GCC_VERSION >= 40000
-+
-+/* GCC 4.1.[01] miscompiles __weak */
-+#ifdef __KERNEL__
-+# if GCC_VERSION >= 40100 &&  GCC_VERSION <= 40101
-+#  error Your version of gcc miscompiles the __weak directive
-+# endif
-+#endif
-+
-+#define __used			__attribute__((__used__))
-+#define __compiler_offsetof(a, b)					\
-+	__builtin_offsetof(a, b)
-+
-+#if GCC_VERSION >= 40100 && GCC_VERSION < 40600
-+# define __compiletime_object_size(obj) __builtin_object_size(obj, 0)
-+#endif
-+
-+#if GCC_VERSION >= 40300
-+/* Mark functions as cold. gcc will assume any path leading to a call
-+ * to them will be unlikely.  This means a lot of manual unlikely()s
-+ * are unnecessary now for any paths leading to the usual suspects
-+ * like BUG(), printk(), panic() etc. [but let's keep them for now for
-+ * older compilers]
-+ *
-+ * Early snapshots of gcc 4.3 don't support this and we can't detect this
-+ * in the preprocessor, but we can live with this because they're unreleased.
-+ * Maketime probing would be overkill here.
-+ *
-+ * gcc also has a __attribute__((__hot__)) to move hot functions into
-+ * a special section, but I don't see any sense in this right now in
-+ * the kernel context
-+ */
-+#define __cold			__attribute__((__cold__))
-+
-+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
-+
-+#ifndef __CHECKER__
-+# define __compiletime_warning(message) __attribute__((warning(message)))
-+# define __compiletime_error(message) __attribute__((error(message)))
-+#endif /* __CHECKER__ */
-+#endif /* GCC_VERSION >= 40300 */
-+
-+#if GCC_VERSION >= 40500
-+/*
-+ * Mark a position in code as unreachable.  This can be used to
-+ * suppress control flow warnings after asm blocks that transfer
-+ * control elsewhere.
-+ *
-+ * Early snapshots of gcc 4.5 don't support this and we can't detect
-+ * this in the preprocessor, but we can live with this because they're
-+ * unreleased.  Really, we need to have autoconf for the kernel.
-+ */
-+#define unreachable() __builtin_unreachable()
-+
-+/* Mark a function definition as prohibited from being cloned. */
-+#define __noclone	__attribute__((__noclone__))
-+
-+#endif /* GCC_VERSION >= 40500 */
-+
-+#if GCC_VERSION >= 40600
-+/*
-+ * Tell the optimizer that something else uses this function or variable.
-+ */
-+#define __visible	__attribute__((externally_visible))
-+#endif
-+
-+/*
-+ * GCC 'asm goto' miscompiles certain code sequences:
-+ *
-+ *   http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
-+ *
-+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
-+ *
-+ * (asm goto is automatically volatile - the naming reflects this.)
-+ */
-+#define asm_volatile_goto(x...)	do { asm goto(x); asm (""); } while (0)
-+
-+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
-+#if GCC_VERSION >= 40400
-+#define __HAVE_BUILTIN_BSWAP32__
-+#define __HAVE_BUILTIN_BSWAP64__
-+#endif
-+#if GCC_VERSION >= 40800 || (defined(__powerpc__) && GCC_VERSION >= 40600)
-+#define __HAVE_BUILTIN_BSWAP16__
-+#endif
-+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
-+
-+#if GCC_VERSION >= 50000
-+#define KASAN_ABI_VERSION 4
-+#elif GCC_VERSION >= 40902
-+#define KASAN_ABI_VERSION 3
-+#endif
-+
-+#endif	/* gcc version >= 40000 specific checks */
- 
- #if !defined(__noclone)
- #define __noclone	/* not needed */
-diff --git a/include/linux/compiler-gcc3.h b/include/linux/compiler-gcc3.h
-deleted file mode 100644
-index 37d4124..0000000
---- a/include/linux/compiler-gcc3.h
-+++ /dev/null
-@@ -1,23 +0,0 @@
--#ifndef __LINUX_COMPILER_H
--#error "Please don't include <linux/compiler-gcc3.h> directly, include <linux/compiler.h> instead."
--#endif
--
--#if __GNUC_MINOR__ < 2
--# error Sorry, your compiler is too old - please upgrade it.
--#endif
--
--#if __GNUC_MINOR__ >= 3
--# define __used			__attribute__((__used__))
--#else
--# define __used			__attribute__((__unused__))
--#endif
--
--#if __GNUC_MINOR__ >= 4
--#define __must_check		__attribute__((warn_unused_result))
--#endif
--
--#ifdef CONFIG_GCOV_KERNEL
--# if __GNUC_MINOR__ < 4
--#   error "GCOV profiling support for gcc versions below 3.4 not included"
--# endif /* __GNUC_MINOR__ */
--#endif /* CONFIG_GCOV_KERNEL */
-diff --git a/include/linux/compiler-gcc4.h b/include/linux/compiler-gcc4.h
-deleted file mode 100644
-index 91b1aa8..0000000
---- a/include/linux/compiler-gcc4.h
-+++ /dev/null
-@@ -1,74 +0,0 @@
--#ifndef __LINUX_COMPILER_H
--#error "Please don't include <linux/compiler-gcc4.h> directly, include <linux/compiler.h> instead."
--#endif
--
--/* GCC 4.1.[01] miscompiles __weak */
--#ifdef __KERNEL__
--# if __GNUC_MINOR__ == 1 && __GNUC_PATCHLEVEL__ <= 1
--#  error Your version of gcc miscompiles the __weak directive
--# endif
--#endif
--
--#define __used			__attribute__((__used__))
--#define __must_check 		__attribute__((warn_unused_result))
--#define __compiler_offsetof(a,b) __builtin_offsetof(a,b)
--
--#if __GNUC_MINOR__ >= 3
--/* Mark functions as cold. gcc will assume any path leading to a call
--   to them will be unlikely.  This means a lot of manual unlikely()s
--   are unnecessary now for any paths leading to the usual suspects
--   like BUG(), printk(), panic() etc. [but let's keep them for now for
--   older compilers]
--
--   Early snapshots of gcc 4.3 don't support this and we can't detect this
--   in the preprocessor, but we can live with this because they're unreleased.
--   Maketime probing would be overkill here.
--
--   gcc also has a __attribute__((__hot__)) to move hot functions into
--   a special section, but I don't see any sense in this right now in
--   the kernel context */
--#define __cold			__attribute__((__cold__))
--
--#define __linktime_error(message) __attribute__((__error__(message)))
--
--/*
-- * GCC 'asm goto' miscompiles certain code sequences:
-- *
-- *   http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
-- *
-- * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
-- * Fixed in GCC 4.8.2 and later versions.
-- *
-- * (asm goto is automatically volatile - the naming reflects this.)
-- */
--#if GCC_VERSION <= 40801
--# define asm_volatile_goto(x...)	do { asm goto(x); asm (""); } while (0)
--#else
--# define asm_volatile_goto(x...)	do { asm goto(x); } while (0)
--#endif
--
--#if __GNUC_MINOR__ >= 5
--/*
-- * Mark a position in code as unreachable.  This can be used to
-- * suppress control flow warnings after asm blocks that transfer
-- * control elsewhere.
-- *
-- * Early snapshots of gcc 4.5 don't support this and we can't detect
-- * this in the preprocessor, but we can live with this because they're
-- * unreleased.  Really, we need to have autoconf for the kernel.
-- */
--#define unreachable() __builtin_unreachable()
--
--/* Mark a function definition as prohibited from being cloned. */
--#define __noclone	__attribute__((__noclone__))
--
--#endif
--#endif
--
--#if __GNUC_MINOR__ > 0
--#define __compiletime_object_size(obj) __builtin_object_size(obj, 0)
--#endif
--#if __GNUC_MINOR__ >= 4 && !defined(__CHECKER__)
--#define __compiletime_warning(message) __attribute__((warning(message)))
--#define __compiletime_error(message) __attribute__((error(message)))
--#endif
--- 
-2.10.0
-

recipes-kernel/linux/linux-sunxi/0001-compiler-gcc5.patch

@@ -1,7 +1,8 @@
-diff -urN git-ORIG/include/linux/compiler-gcc6.h git/include/linux/compiler-gcc6.h
---- git-ORIG/include/linux/compiler-gcc6.h	1969-12-31 19:00:00.000000000 -0500
-+++ git/include/linux/compiler-gcc6.h	2017-04-09 19:50:16.920945874 -0400
-@@ -0,0 +1,65 @@
+Index: git/include/linux/compiler-gcc5.h
+===================================================================
+--- git/include/linux/compiler-gcc5.h    2015-09-19 20:11:27.999423338 +0200
++++ git/include/linux/compiler-gcc5.h    2015-09-23 10:26:05.000000000 +0200
+@@ -0,0 +1,66 @@
 +#ifndef __LINUX_COMPILER_H
 +#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
 +#endif
@@ -57,6 +58,7 @@ diff -urN git-ORIG/include/linux/compiler-gcc6.h git/include/linux/compiler-gcc6
 + *   http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
 + *
 + * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
++ * Fixed in GCC 4.8.2 and later versions.
 + *
 + * (asm goto is automatically volatile - the naming reflects this.)
 + */

recipes-kernel/linux/linux-sunxi/0004-arm-put-user-asm-fix.patch

@@ -1,29 +0,0 @@
-From 25a7e85eb0d58479f7d8895b1b29a648bd07d60e Mon Sep 17 00:00:00 2001
-From: Andrey Lebedev <andrey@lebedev.lt>
-Date: Mon, 20 Jan 2020 23:19:51 +0200
-Subject: [PATCH 2/2] Fix asm error in put_user under gcc version 8 and above
-
-Fixes these errors during compilation of linux-sunxi-3.4 kernel:
-/tmp/ccCGMQmS.s:648: Error: .err encountered
-
-Taken from https://patchwork.kernel.org/patch/10546809/
----
- arch/arm/include/asm/uaccess.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
-index b04850fd..abfafbbf 100644
---- a/arch/arm/include/asm/uaccess.h
-+++ b/arch/arm/include/asm/uaccess.h
-@@ -159,7 +159,7 @@ extern int __put_user_8(void *, unsigned long long);
- 	({								\
- 		unsigned long __limit = current_thread_info()->addr_limit - 1; \
- 		const typeof(*(p)) __user *__tmp_p = (p);		\
--		register const typeof(*(p)) __r2 asm("r2") = (x);	\
-+		register typeof(*(p)) __r2 asm("r2") = (x);		\
- 		register const typeof(*(p)) __user *__p asm("r0") = __tmp_p; \
- 		register unsigned long __l asm("r1") = __limit;		\
- 		register int __e asm("r0");				\
--- 
-2.20.1
-

recipes-kernel/linux/linux-sunxi/0005-silence-warning.patch

@@ -1,25 +0,0 @@
-From 302604ee4a2011871cb26deaf69d567cf57d0fe3 Mon Sep 17 00:00:00 2001
-From: Andrey Lebedev <andrey@lebedev.lt>
-Date: Mon, 20 Jan 2020 23:20:07 +0200
-Subject: [PATCH 1/2] Silence annoying warning
-
----
- include/linux/log2.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/include/linux/log2.h b/include/linux/log2.h
-index fd7ff3d9..14458fdd 100644
---- a/include/linux/log2.h
-+++ b/include/linux/log2.h
-@@ -18,7 +18,7 @@
- /*
-  * deal with unrepresentable constant logarithms
-  */
--extern __attribute__((const, noreturn))
-+extern __attribute__((const))
- int ____ilog2_NaN(void);
- 
- /*
--- 
-2.20.1
-