Merge pull request #162 from xpete/krogoth

added a20som support to pyA20

README.md

@@ -1,12 +1,71 @@
-meta-allwinner
+meta-sunxi
 ==============
 
-UNOFFICIAL OE-core layer for Allwinner A10 boards
-
-Author: Enrico Butera <ebutera@users.berlios.de>
+Official sunxi OpenEmbedded layer for Allwinner-based boards.
 
 This layer depends on the additional layer:
 
 meta-openembedded: git://git.openembedded.org/meta-openembedded
 
-Build tested with core-image-base.
+Tested with core-image-base.
+
+Maintainers:
+
+* Nicolas Aguirre <aguirre.nicolas@gmail.com>
+* Enrico Butera <ebutera@users.sourceforge.net>
+* Sergey Lapin <slapin@ossfans.org>
+
+Kernel / U-Boot Version
+===========
+Most Allwinner devices and hardware are supported in mainline kernel and U-Boot, so this layer builds mainline by default.
+There is a custom U-Boot and Kernel version for sunxi devices which includes some special drivers not mainlined.
+These versions are rather old (3.4 for kernel and 2014.04 for U-Boot), but may support more functions and devices than current mainline 
+
+If you want to switch back to sunxi versions for some reasons (no device tree available, unsupported hardware), either:
+- change the file conf/machine/include/sunxi.inc to include the following block
+- edit your conf/local.conf to add the following block
+
+	PREFERRED_PROVIDER_u-boot="u-boot-sunxi"
+	PREFERRED_PROVIDER_virtual/bootloader="u-boot-sunxi"
+	PREFERRED_PROVIDER_virtual/kernel="linux-sunxi"
+
+If you already have built the mainline versions it might be necessary to reset the build directories with:
+
+	bitbake -c clean linux
+	bitbake -c clean u-boot
+
+Also, older kernel versions such as this don't build successfully with any gcc version 5.0 or newer. Since gcc-5.2 is the current
+default compiler on master, if you wish to build this kernel with master you'll need to add the following to your conf/local.conf:
+
+	GCCVERSION = "4.9%"
+
+Performance
+===========
+The default machine settings are meant to be the lowest common denominator, maximizing generality.
+Significantly better performance (2x-3x) can be achieved with the following settings:
+
+**_Allwinner A20_**
+
+For Allwinner A20 (Cubieboard2/CubieTruck), the following tuning options are recommended:
+
+_Enable hardfloat, thumb2 and neon capabilities_
+
+	DEFAULTTUNE = "cortexa7hf-neon-vfpv4"
+
+This tuning profile takes advantage of the Allwinner A20 hardfloat, neon and vfpv4 capabilities.
+
+_Change CPU governor to ondemand, and tune settings_
+
+	echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
+	echo 336000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
+	echo 912000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
+	#More aggressive
+	#echo 1008000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
+	echo 40 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
+	echo 200000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate
+
+This code changes the default CPU governor from _fantasy_ to _ondemand_, and tunes its settings, as recommended at http://linux-sunxi.org/Cpufreq
+
+For additional discussion, see https://github.com/linux-sunxi/meta-sunxi/issues/25
+
+

classes/sdcard_image-sunxi.bbclass

@@ -2,7 +2,7 @@ inherit image_types
 
 #
 # Create an image that can by written onto a SD card using dd.
-# Originally written for rasberrypi adapt for the needs of allwinner a10 based boards
+# Originally written for rasberrypi adapt for the needs of allwinner sunxi based boards
 #
 # The disk layout used is:
 #
@@ -13,6 +13,8 @@ inherit image_types
 #
 #
 
+# This image depends on the rootfs image
+IMAGE_TYPEDEP_sunxi-sdimg = "${SDIMG_ROOTFS_TYPE}"
 
 # Boot partition volume id
 BOOTDD_VOLUME_ID ?= "${MACHINE}"
@@ -24,10 +26,10 @@ BOOT_SPACE ?= "20480"
 IMAGE_ROOTFS_ALIGNMENT = "2048"
 
 # Use an uncompressed ext3 by default as rootfs
-SDIMG_ROOTFS_TYPE ?= "ext3"
-SDIMG_ROOTFS = "${IMAGE_NAME}.rootfs.${SDIMG_ROOTFS_TYPE}"
+SDIMG_ROOTFS_TYPE ?= "ext4"
+SDIMG_ROOTFS = "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.${SDIMG_ROOTFS_TYPE}"
 
-IMAGE_DEPENDS_a10-sdimg = " \
+IMAGE_DEPENDS_sunxi-sdimg += " \
 			parted-native \
 			mtools-native \
 			dosfstools-native \
@@ -35,12 +37,14 @@ IMAGE_DEPENDS_a10-sdimg = " \
 			virtual/bootloader \
 			"
 
+rootfs[depends] += "virtual/kernel:do_deploy"
+
 # SD card image name
-SDIMG = "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.a10-sdimg"
+SDIMG = "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.sunxi-sdimg"
 
 IMAGEDATESTAMP = "${@time.strftime('%Y.%m.%d',time.gmtime())}"
 
-IMAGE_CMD_a10-sdimg () {
+IMAGE_CMD_sunxi-sdimg () {
 
 	# Align partitions
 	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
@@ -61,10 +65,35 @@ IMAGE_CMD_a10-sdimg () {
 
 	# Create a vfat image with boot files
 	BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }')
+	rm -f ${WORKDIR}/boot.img
 	mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
-	mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/u-boot.bin ::
+
 	mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::uImage
 
+	# Copy device tree file
+	if test -n "${KERNEL_DEVICETREE}"; then
+		for DTS_FILE in ${KERNEL_DEVICETREE}; do
+			DTS_BASE_NAME=`basename ${DTS_FILE} | awk -F "." '{print $1}'`
+			if [ -e "${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb" ]; then
+				kernel_bin="`readlink ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin`"
+				kernel_bin_for_dtb="`readlink ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb | sed "s,$DTS_BASE_NAME,${MACHINE},g;s,\.dtb$,.bin,g"`"
+				if [ $kernel_bin = $kernel_bin_for_dtb ]; then
+					mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb ::/${DTS_BASE_NAME}.dtb
+				fi
+			fi
+		done
+	fi
+
+	if [ -e "${DEPLOY_DIR_IMAGE}/fex.bin" ]
+	then
+		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/fex.bin ::script.bin
+	fi
+	if [ -e "${DEPLOY_DIR_IMAGE}/boot.scr" ]
+	then
+		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/boot.scr ::boot.scr
+	fi
+
+
 	# Add stamp file
 	echo "${IMAGE_NAME}-${IMAGEDATESTAMP}" > ${WORKDIR}/image-version-info
 	mcopy -i ${WORKDIR}/boot.img -v ${WORKDIR}//image-version-info ::
@@ -72,14 +101,14 @@ IMAGE_CMD_a10-sdimg () {
 	# Burn Partitions
 	dd if=${WORKDIR}/boot.img of=${SDIMG} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
 	# If SDIMG_ROOTFS_TYPE is a .xz file use xzcat
-	if [[ "$SDIMG_ROOTFS_TYPE" == *.xz ]]
+	if echo "${SDIMG_ROOTFS_TYPE}" | egrep -q "*\.xz"
 	then
 		xzcat ${SDIMG_ROOTFS} | dd of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
 	else
 		dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
 	fi
 
-	#write u-boot-spl.bin and u-boot
-	dd if=${DEPLOY_DIR_IMAGE}/sunxi-spl.bin of=${SDIMG} bs=1024 seek=8 conv=notrunc
-	dd if=${DEPLOY_DIR_IMAGE}/u-boot.bin of=${SDIMG} bs=1024 seek=32 conv=notrunc
+	#write u-boot and spl at the beginint of sdcard in one shot
+	dd if=${DEPLOY_DIR_IMAGE}/u-boot-sunxi-with-spl.bin of=${SDIMG} bs=1024 seek=8 conv=notrunc
+
 }

conf/layer.conf

@@ -4,6 +4,6 @@ BBPATH .= ":${LAYERDIR}"
 # We have a recipes directory, add to BBFILES
 BBFILES += "${LAYERDIR}/recipes*/*/*.bb ${LAYERDIR}/recipes*/*/*.bbappend"
 
-BBFILE_COLLECTIONS += "meta-allwinner"
-BBFILE_PATTERN_meta-allwinner := "^${LAYERDIR}/"
-BBFILE_PRIORITY_meta-allwinner = "10"
+BBFILE_COLLECTIONS += "meta-sunxi"
+BBFILE_PATTERN_meta-sunxi := "^${LAYERDIR}/"
+BBFILE_PRIORITY_meta-sunxi = "10"

conf/machine/bananapi.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: Bananapi
+#@DESCRIPTION: Machine configuration for the bananapi, based on allwinner A20 CPU http://bananapi.org/
+
+require conf/machine/include/sun7i.inc
+
+KERNEL_DEVICETREE = "sun7i-a20-bananapi.dtb"
+UBOOT_MACHINE = "Bananapi_config"
+SUNXI_FEX_FILE = "sys_config/a20/Bananapi.fex"

conf/machine/cubieboard.conf

@@ -2,33 +2,8 @@
 #@NAME: CubieBoard
 #@DESCRIPTION: Machine configuration for the cubieboard, based on allwinner a10 CPU http://cubieboard.org/
 
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-           xf86-input-evdev \
-           xf86-input-mouse \
-           xf86-input-keyboard"
+require conf/machine/include/sun4i.inc
 
-# Only has DVI connector for external screen
-GUI_MACHINE_CLASS = "bigscreen"
-
-require conf/machine/include/tune-cortexa8.inc
-
-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_VERSION_linux-libc-headers = "3.0.8"
-
-KERNEL_IMAGETYPE = "uImage"
-
-UBOOT_MACHINE = "cubieboard"
-UBOOT_ENTRYPOINT = "0x40008000"
-UBOOT_LOADADDRESS = "0x40008000"
-
-SPL_BINARY = "sunxi-spl.bin"
-
-IMAGE_CLASSES += "sdcard_image-a10"
-IMAGE_FSTYPES += "ext3 a10-sdimg"
-
-
-# Guesswork
-SERIAL_CONSOLE = "115200 ttyS0"
-
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"
+KERNEL_DEVICETREE = "sun4i-a10-cubieboard.dtb"
+UBOOT_MACHINE = "Cubieboard_config"
+SUNXI_FEX_FILE = "sys_config/a10/cubieboard.fex"

conf/machine/cubieboard2.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: CubieBoard2
+#@DESCRIPTION: Machine configuration for the cubieboard2, based on allwinner A20 CPU http://cubieboard.org/
+
+require conf/machine/include/sun7i.inc
+
+KERNEL_DEVICETREE = "sun7i-a20-cubieboard2.dtb"
+UBOOT_MACHINE = "Cubieboard2_config"
+SUNXI_FEX_FILE = "sys_config/a20/cubieboard2.fex"

conf/machine/cubietruck.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: Cubietruck
+#@DESCRIPTION: Machine configuration for the Cubietruck, based on allwinner A20 CPU http://cubieboard.org/
+
+require conf/machine/include/sun7i.inc
+
+KERNEL_DEVICETREE = "sun7i-a20-cubietruck.dtb"
+UBOOT_MACHINE = "Cubietruck_config"
+SUNXI_FEX_FILE = "sys_config/a20/cubietruck.fex"

conf/machine/forfun-q88db.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: Forfun Q88DB
+#@DESCRIPTION: Machine configuration for the Forfun Q88DB Tablet with A13 CPU
+#http://linux-sunxi.org/Forfun_Q88DB
+
+require conf/machine/include/sun5i.inc
+
+UBOOT_MACHINE = "forfun_q88db_defconfig"
+SUNXI_FEX_FILE = "sys_config/a13/forfun_q88db.fex"

conf/machine/include/sun4i.inc

@@ -0,0 +1,5 @@
+require conf/machine/include/sunxi.inc
+require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/tune-cortexa8.inc
+
+SOC_FAMILY = "sun4i"

conf/machine/include/sun5i.inc

@@ -0,0 +1,5 @@
+require conf/machine/include/sunxi.inc
+require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/tune-cortexa8.inc
+
+SOC_FAMILY = "sun5i"

conf/machine/include/sun7i.inc

@@ -0,0 +1,5 @@
+require conf/machine/include/sunxi.inc
+require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/tune-cortexa7.inc
+
+SOC_FAMILY = "sun7i"

conf/machine/include/sunxi-mali.inc

@@ -0,0 +1,13 @@
+PREFERRED_PROVIDER_virtual/mesa ?= "mesa-gl"
+PREFERRED_PROVIDER_virtual/libgl ?= "mesa-gl"
+PREFERRED_PROVIDER_virtual/libgles1 ?= "sunxi-mali"
+PREFERRED_PROVIDER_virtual/libgles2 ?= "sunxi-mali"
+PREFERRED_PROVIDER_virtual/egl ?= "sunxi-mali"
+
+XSERVER += "sunxi-mali \
+            sunxi-mali-dev"
+
+MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "\
+ kernel-module-mali \
+ kernel-module-mali-drm \
+  "

conf/machine/include/sunxi.inc

@@ -0,0 +1,32 @@
+SOC_FAMILY ??= ""
+include conf/machine/include/soc-family.inc
+
+# Sub-architecture support
+MACHINE_SOCARCH_SUFFIX ?= ""
+MACHINE_SOCARCH_SUFFIX_sun4i = "-sun4i"
+
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+XSERVER = "xserver-xorg \
+           xf86-video-fbturbo \
+           xf86-input-evdev \
+           xf86-input-mouse \
+           xf86-input-keyboard"
+
+PREFERRED_PROVIDER_virtual/kernel ?= "linux"
+PREFERRED_PROVIDER_u-boot ?= "u-boot"
+PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
+
+KERNEL_IMAGETYPE ?= "uImage"
+
+IMAGE_CLASSES += "sdcard_image-sunxi"
+IMAGE_FSTYPES += "ext3 tar.gz sunxi-sdimg"
+
+MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"
+
+UBOOT_LOCALVERSION = "-g${@d.getVar('SRCPV', True).partition('+')[2][0:7]}"
+
+UBOOT_ENTRYPOINT ?= "0x40008000"
+UBOOT_LOADADDRESS ?= "0x400080OB00"
+
+SERIAL_CONSOLE ?= "115200 ttyS0"
+MACHINE_FEATURES ?= "alsa apm keyboard rtc serial screen usbgadget usbhost vfat"

conf/machine/mele.conf

@@ -2,32 +2,8 @@
 #@NAME: Mele a1000/a2000
 #@DESCRIPTION: Machine configuration for the Mele a1000 and a2000, base on allwinner a10 CPU
 
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-           xf86-input-evdev \
-           xf86-input-mouse \
-           xf86-input-keyboard"
+require conf/machine/include/sun4i.inc
 
-# Only has DVI connector for external screen
-GUI_MACHINE_CLASS = "bigscreen"
-
-require conf/machine/include/tune-cortexa8.inc
-
-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_VERSION_linux-libc-headers = "3.0.8"
-
-KERNEL_IMAGETYPE = "uImage"
-
-UBOOT_MACHINE = "cubieboard"
-UBOOT_ENTRYPOINT = "0x40008000"
-UBOOT_LOADADDRESS = "0x40008000"
-
-SPL_BINARY = "sunxi-spl.bin"
-
-IMAGE_CLASSES += "sdcard_image-a10"
-IMAGE_FSTYPES += "ext3 a10-sdimg"
-
-# Guesswork
-SERIAL_CONSOLE = "115200 ttyS0"
-
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"
+KERNEL_DEVICETREE = "sun4i-a10-a1000.dtb"
+UBOOT_MACHINE = "Mele_A1000_config"
+SUNXI_FEX_FILE = "sys_config/a10/mele_a1000.fex"

conf/machine/meleg.conf

@@ -0,0 +1,8 @@
+#@TYPE: Machine
+#@NAME: Mele a1000g/a2000g
+#@DESCRIPTION: Machine configuration for the Mele a1000g and a2000g, base on allwinner a10 CPU
+
+require conf/machine/include/sun4i.inc
+
+UBOOT_MACHINE = "Mele_A1000G_quad_config"
+SUNXI_FEX_FILE = "sys_config/a10/mele_a1000g.fex"

conf/machine/olinuxino-a10lime.conf

@@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: Olimex A10-OLinuXino Lime (4GB) Board
+#@DESCRIPTION: Machine configuration for the Olimex A10-OLinuXino Lime Board, based on Allwinner A10 CPU
+#https://github.com/OLIMEX/OLINUXINO
+
+require conf/machine/include/sun4i.inc
+
+KERNEL_DEVICETREE = "sun4i-a10-olinuxino-lime.dtb"
+UBOOT_MACHINE = "A10-OLinuXino-Lime_config"
+SUNXI_FEX_FILE = "sys_config/a10/a10-olinuxino-lime.fex"

conf/machine/olinuxino-a10s.conf

@@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: Olimex A10S-OLinuXino-MICRO Board
+#@DESCRIPTION: Machine configuration for Olimex A10S-OLinuXino-MICRO Board, based on Allwinner A10s CPU
+#https://github.com/OLIMEX/OLINUXINO
+
+require conf/machine/include/sun5i.inc
+
+KERNEL_DEVICETREE = "sun5i-a10s-olinuxino-micro.dtb"
+UBOOT_MACHINE = "A10s-OLinuXino-M_config"
+SUNXI_FEX_FILE = "sys_config/a10s/a10s-olinuxino-m.fex"

conf/machine/olinuxino-a13.conf

@@ -3,36 +3,8 @@
 #@DESCRIPTION: Machine configuration for the Olime A13-OLinuXino Board, base on allwinner a13 CPU
 #https://github.com/OLIMEX/OLINUXINO
 
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-	   xf86-input-tslib \
-	   tslib-calibrate \
-	   tslib-tests \
-           xf86-input-evdev \
-           xf86-input-mouse \
-           xf86-input-keyboard \
-	   xf86-video-fbdev \
-"
+require conf/machine/include/sun5i.inc
 
-# Only has DVI connector for external screen
-GUI_MACHINE_CLASS = "bigscreen"
-
-require conf/machine/include/tune-cortexa8.inc
-
-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_VERSION_linux-libc-headers = "3.0.8"
-
-KERNEL_IMAGETYPE = "uImage"
-
-UBOOT_MACHINE = "a13_olinuxino"
-UBOOT_ENTRYPOINT = "0x40008000"
-UBOOT_LOADADDRESS = "0x40008000"
-
-SPL_BINARY = "sunxi-spl.bin"
-
-IMAGE_FSTYPES += "tar.bz2 squashfs a10-sdimg"
-
-# Guesswork
-SERIAL_CONSOLE = "115200 ttyS0"
-
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"
+KERNEL_DEVICETREE = "sun5i-a13-olinuxino.dtb"
+UBOOT_MACHINE = "A13-OLinuXino_config"
+SUNXI_FEX_FILE = "sys_config/a13/a13-olinuxino.fex"

conf/machine/olinuxino-a13som.conf

@@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: Olimex A13-SOM
+#@DESCRIPTION: Machine configuration for the Olimex A13-SOM Evaluation Board, based on Allwinner A13 CPU
+#https://github.com/OLIMEX/SOM
+
+require conf/machine/include/sun5i.inc
+
+KERNEL_DEVICETREE = "sun5i-a13-olinuxino-micro.dtb"
+UBOOT_MACHINE = "A13-OLinuXinoM_defconfig"
+SUNXI_FEX_FILE = "sys_config/a13/a13-olinuxinom.fex"

conf/machine/olinuxino-a20.conf

@@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: Olimex A20-OLinuXino Board
+#@DESCRIPTION: Machine configuration for the Olimex A20-OLinuXino Board, based on Allwinner A20 CPU
+#https://github.com/OLIMEX/OLINUXINO
+
+require conf/machine/include/sun7i.inc
+
+KERNEL_DEVICETREE = "sun7i-a20-olinuxino-micro.dtb"
+UBOOT_MACHINE = "A20-OLinuXino_MICRO_config"
+SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_micro.fex"

conf/machine/olinuxino-a20lime.conf

@@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: Olimex A20-OLinuXino Lime (4GB) Board
+#@DESCRIPTION: Machine configuration for the Olimex A20-OLinuXino Lime Board, based on Allwinner A20 CPU
+#https://github.com/OLIMEX/OLINUXINO
+
+require conf/machine/include/sun7i.inc
+
+KERNEL_DEVICETREE = "sun7i-a20-olinuxino-lime.dtb"
+UBOOT_MACHINE = "A20-OLinuXino-Lime_config"
+SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_lime.fex"

conf/machine/olinuxino-a20lime2.conf

@@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: Olimex A20-OLinuXino Lime2 (4GB) Board
+#@DESCRIPTION: Machine configuration for the Olimex A20-OLinuXino Lime2 Board, based on Allwinner A20 CPU
+#https://github.com/OLIMEX/OLINUXINO
+
+require conf/machine/include/sun7i.inc
+
+KERNEL_DEVICETREE = "sun7i-a20-olinuxino-lime2.dtb"
+UBOOT_MACHINE = "A20-OLinuXino-Lime2_config"
+SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_lime2.fex"

conf/machine/olinuxino-a20som.conf

@@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: Olimex A20-SOM
+#@DESCRIPTION: Machine configuration for the Olimex A20-SOM Evaluation Board, based on Allwinner A20 CPU
+#https://github.com/OLIMEX/SOM
+
+require conf/machine/include/sun7i.inc
+
+KERNEL_DEVICETREE = "sun7i-a20-olimex-som-evb.dtb"
+UBOOT_MACHINE = "A20-Olimex-SOM-EVB_config"
+SUNXI_FEX_FILE = "sys_config/a20/olimex_a20_som.fex"

conf/machine/pcduino.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: pcduino-lite-wifi
+#@DESCRIPTION: Machine configuration for the pcDuino-Lite-Wifi, base on allwinner a10 CPU
+
+require conf/machine/include/sun4i.inc
+
+KERNEL_DEVICETREE = "sun4i-a10-pcduino.dtb"
+UBOOT_MACHINE = "Linksprite_pcDuino_defconfig"
+SUNXI_FEX_FILE = "sys_config/a10/pcduino.fex"

recipes-bsp/sunxi-board-fex/sunxi-board-fex.bb

@@ -0,0 +1,47 @@
+# Copyright (C) 2013 Tomas Novotny <novotny@rehivetech.com>
+# Released under BSD-2-Clause or MIT license
+DESCRIPTION = "Handler for Allwinner's FEX files"
+LICENSE = "CC0-1.0"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/${LICENSE};md5=0ceb3372c9595f0a8067e55da801e4a1"
+DEPENDS = "sunxi-tools-native"
+PV = "1.1+git${SRCPV}"
+PR = "r0"
+
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
+
+SRC_URI = "git://github.com/linux-sunxi/sunxi-boards.git;protocol=git"
+# Increase PV with SRCREV change
+SRCREV = "496ef0fbd166cc2395daa76dd3c359357420963d"
+
+S = "${WORKDIR}/git"
+
+SUNXI_FEX_BIN_IMAGE = "fex-${MACHINE}-${PV}-${PR}.bin"
+SUNXI_FEX_BIN_IMAGE_SYMLINK = "fex-${MACHINE}.bin"
+SUNXI_FEX_BIN_IMAGE_SYMLINK_SIMPLE = "fex.bin"
+
+inherit deploy
+
+do_compile() {
+    fex2bin "${S}/${SUNXI_FEX_FILE}" > "${B}/${SUNXI_FEX_BIN_IMAGE}"
+}
+
+do_deploy() {
+    install -m 0644 ${B}/${SUNXI_FEX_BIN_IMAGE} ${DEPLOYDIR}/
+    cd ${DEPLOYDIR}
+    ln -sf ${SUNXI_FEX_BIN_IMAGE} ${SUNXI_FEX_BIN_IMAGE_SYMLINK}
+    ln -sf ${SUNXI_FEX_BIN_IMAGE} ${SUNXI_FEX_BIN_IMAGE_SYMLINK_SIMPLE}
+}
+addtask deploy before do_build after do_compile
+
+PACKAGES = ""
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+do_install[noexec] = "1"
+do_package[noexec] = "1"
+do_packagedata[noexec] = "1"
+do_package_write[noexec] = "1"
+do_package_write_ipk[noexec] = "1"
+do_package_write_rpm[noexec] = "1"
+do_package_write_deb[noexec] = "1"
+do_populate_sysroot[noexec] = "1"

recipes-bsp/u-boot/files/boot.cmd

@@ -0,0 +1,4 @@
+setenv bootargs console=${console} console=tty1 root=/dev/mmcblk0p2 rootwait panic=10 ${extra}
+load mmc 0:1 ${fdt_addr_r} ${fdtfile} || load mmc 0:1 ${fdt_addr_r} boot/${fdtfile}
+load mmc 0:1 ${kernel_addr_r} zImage || load mmc 0:1 ${kernel_addr_r} boot/zImage || load mmc 0:1 ${kernel_addr_r} uImage || load mmc 0:1 ${kernel_addr_r} boot/uImage
+bootz ${kernel_addr_r} - ${fdt_addr_r} || bootm ${kernel_addr_r} - ${fdt_addr_r}

recipes-bsp/u-boot/u-boot-sunxi.bb

@@ -0,0 +1,36 @@
+DESCRIPTION = "U-Boot port for sunxi"
+
+require recipes-bsp/u-boot/u-boot.inc
+
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://Licenses/gpl-2.0.txt;md5=b234ee4d69f5fce4486a80fdaf4a4263"
+
+# No patches for other machines yet
+
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
+
+DEFAULT_PREFERENCE_sun4i="1"
+DEFAULT_PREFERENCE_sun5i="1"
+DEFAULT_PREFERENCE_sun7i="1"
+
+# Sunxi U-Boot uses different names for some boards
+UBOOT_MACHINE_olinuxino-a20 = "A20-OLinuXino-Micro_config"
+UBOOT_MACHINE_olinuxino-a10s = "A10s-OLinuXino-Micro_config"
+UBOOT_MACHINE_meleg = "Mele_A1000G_config"
+
+SRC_URI = " \
+	git://github.com/linux-sunxi/u-boot-sunxi.git;protocol=git;branch=sunxi \
+	file://0002-gcc5-fixes.patch \
+	"
+
+PE = "1"
+
+PV = "v2014.04+git${SRCPV}"
+# Corresponds 2014.04 in Makefile
+SRCREV = "ea1ac32bf76eb60baef474c2516fc431b381d952"
+
+S = "${WORKDIR}/git"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+SPL_BINARY="u-boot-sunxi-with-spl.bin"

recipes-bsp/u-boot/u-boot-sunxi/0002-gcc5-fixes.patch

@@ -0,0 +1,197 @@
+From a5e50d6fd7321d0bc60fda2db938c170d09f9dee Mon Sep 17 00:00:00 2001
+From: Trevor Woerner <twoerner@gmail.com>
+Date: Thu, 24 Sep 2015 22:36:02 -0400
+Subject: [PATCH] gcc5 fixes
+
+gcc5 is pickier about inline functions defined in headers.
+
+Signed-off-by: Trevor Woerner <twoerner@gmail.com>
+---
+ arch/arm/include/asm/io.h     | 12 ++++----
+ common/board_f.c              | 18 ++++++------
+ common/main.c                 |  2 +-
+ include/linux/compiler-gcc5.h | 65 +++++++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 81 insertions(+), 16 deletions(-)
+ create mode 100644 include/linux/compiler-gcc5.h
+
+diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
+index 6a1f05a..2f6925b 100644
+--- a/arch/arm/include/asm/io.h
++++ b/arch/arm/include/asm/io.h
+@@ -75,7 +75,7 @@ static inline phys_addr_t virt_to_phys(void * vaddr)
+ #define __arch_putw(v,a)		(*(volatile unsigned short *)(a) = (v))
+ #define __arch_putl(v,a)		(*(volatile unsigned int *)(a) = (v))
+ 
+-extern inline void __raw_writesb(unsigned long addr, const void *data,
++static inline void __raw_writesb(unsigned long addr, const void *data,
+ 				 int bytelen)
+ {
+ 	uint8_t *buf = (uint8_t *)data;
+@@ -83,7 +83,7 @@ extern inline void __raw_writesb(unsigned long addr, const void *data,
+ 		__arch_putb(*buf++, addr);
+ }
+ 
+-extern inline void __raw_writesw(unsigned long addr, const void *data,
++static inline void __raw_writesw(unsigned long addr, const void *data,
+ 				 int wordlen)
+ {
+ 	uint16_t *buf = (uint16_t *)data;
+@@ -91,7 +91,7 @@ extern inline void __raw_writesw(unsigned long addr, const void *data,
+ 		__arch_putw(*buf++, addr);
+ }
+ 
+-extern inline void __raw_writesl(unsigned long addr, const void *data,
++static inline void __raw_writesl(unsigned long addr, const void *data,
+ 				 int longlen)
+ {
+ 	uint32_t *buf = (uint32_t *)data;
+@@ -99,21 +99,21 @@ extern inline void __raw_writesl(unsigned long addr, const void *data,
+ 		__arch_putl(*buf++, addr);
+ }
+ 
+-extern inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
++static inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
+ {
+ 	uint8_t *buf = (uint8_t *)data;
+ 	while(bytelen--)
+ 		*buf++ = __arch_getb(addr);
+ }
+ 
+-extern inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
++static inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
+ {
+ 	uint16_t *buf = (uint16_t *)data;
+ 	while(wordlen--)
+ 		*buf++ = __arch_getw(addr);
+ }
+ 
+-extern inline void __raw_readsl(unsigned long addr, void *data, int longlen)
++static inline void __raw_readsl(unsigned long addr, void *data, int longlen)
+ {
+ 	uint32_t *buf = (uint32_t *)data;
+ 	while(longlen--)
+diff --git a/common/board_f.c b/common/board_f.c
+index f285bad..72b421c 100644
+--- a/common/board_f.c
++++ b/common/board_f.c
+@@ -78,24 +78,24 @@ DECLARE_GLOBAL_DATA_PTR;
+  ************************************************************************
+  * May be supplied by boards if desired
+  */
+-inline void __coloured_LED_init(void) {}
++void __coloured_LED_init(void) {}
+ void coloured_LED_init(void)
+ 	__attribute__((weak, alias("__coloured_LED_init")));
+-inline void __red_led_on(void) {}
++void __red_led_on(void) {}
+ void red_led_on(void) __attribute__((weak, alias("__red_led_on")));
+-inline void __red_led_off(void) {}
++void __red_led_off(void) {}
+ void red_led_off(void) __attribute__((weak, alias("__red_led_off")));
+-inline void __green_led_on(void) {}
++void __green_led_on(void) {}
+ void green_led_on(void) __attribute__((weak, alias("__green_led_on")));
+-inline void __green_led_off(void) {}
++void __green_led_off(void) {}
+ void green_led_off(void) __attribute__((weak, alias("__green_led_off")));
+-inline void __yellow_led_on(void) {}
++void __yellow_led_on(void) {}
+ void yellow_led_on(void) __attribute__((weak, alias("__yellow_led_on")));
+-inline void __yellow_led_off(void) {}
++void __yellow_led_off(void) {}
+ void yellow_led_off(void) __attribute__((weak, alias("__yellow_led_off")));
+-inline void __blue_led_on(void) {}
++void __blue_led_on(void) {}
+ void blue_led_on(void) __attribute__((weak, alias("__blue_led_on")));
+-inline void __blue_led_off(void) {}
++void __blue_led_off(void) {}
+ void blue_led_off(void) __attribute__((weak, alias("__blue_led_off")));
+ 
+ /*
+diff --git a/common/main.c b/common/main.c
+index 8b6f274..3312b90 100644
+--- a/common/main.c
++++ b/common/main.c
+@@ -27,7 +27,7 @@ DECLARE_GLOBAL_DATA_PTR;
+ /*
+  * Board-specific Platform code can reimplement show_boot_progress () if needed
+  */
+-void inline __show_boot_progress (int val) {}
++void __show_boot_progress (int val) {}
+ void show_boot_progress (int val) __attribute__((weak, alias("__show_boot_progress")));
+ 
+ #define MAX_DELAY_STOP_STR 32
+diff --git a/include/linux/compiler-gcc5.h b/include/linux/compiler-gcc5.h
+new file mode 100644
+index 0000000..c8c5659
+--- /dev/null
++++ b/include/linux/compiler-gcc5.h
+@@ -0,0 +1,65 @@
++#ifndef __LINUX_COMPILER_H
++#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
++#endif
++
++#define __used				__attribute__((__used__))
++#define __must_check			__attribute__((warn_unused_result))
++#define __compiler_offsetof(a, b)	__builtin_offsetof(a, b)
++
++/* Mark functions as cold. gcc will assume any path leading to a call
++   to them will be unlikely.  This means a lot of manual unlikely()s
++   are unnecessary now for any paths leading to the usual suspects
++   like BUG(), printk(), panic() etc. [but let's keep them for now for
++   older compilers]
++
++   Early snapshots of gcc 4.3 don't support this and we can't detect this
++   in the preprocessor, but we can live with this because they're unreleased.
++   Maketime probing would be overkill here.
++
++   gcc also has a __attribute__((__hot__)) to move hot functions into
++   a special section, but I don't see any sense in this right now in
++   the kernel context */
++#define __cold			__attribute__((__cold__))
++
++#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
++
++#ifndef __CHECKER__
++# define __compiletime_warning(message) __attribute__((warning(message)))
++# define __compiletime_error(message) __attribute__((error(message)))
++#endif /* __CHECKER__ */
++
++/*
++ * Mark a position in code as unreachable.  This can be used to
++ * suppress control flow warnings after asm blocks that transfer
++ * control elsewhere.
++ *
++ * Early snapshots of gcc 4.5 don't support this and we can't detect
++ * this in the preprocessor, but we can live with this because they're
++ * unreleased.  Really, we need to have autoconf for the kernel.
++ */
++#define unreachable() __builtin_unreachable()
++
++/* Mark a function definition as prohibited from being cloned. */
++#define __noclone	__attribute__((__noclone__))
++
++/*
++ * Tell the optimizer that something else uses this function or variable.
++ */
++#define __visible __attribute__((externally_visible))
++
++/*
++ * GCC 'asm goto' miscompiles certain code sequences:
++ *
++ *   http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
++ *
++ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
++ *
++ * (asm goto is automatically volatile - the naming reflects this.)
++ */
++#define asm_volatile_goto(x...)	do { asm goto(x); asm (""); } while (0)
++
++#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
++#define __HAVE_BUILTIN_BSWAP32__
++#define __HAVE_BUILTIN_BSWAP64__
++#define __HAVE_BUILTIN_BSWAP16__
++#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
+-- 
+2.6.0.rc3
+

recipes-bsp/u-boot/u-boot_2016.03.bb

@@ -0,0 +1,44 @@
+DESCRIPTION="Upstream's U-boot configured for sunxi devices"
+
+require recipes-bsp/u-boot/u-boot.inc
+
+DEPENDS += "dtc-native"
+
+LICENSE = "GPLv2"
+
+LIC_FILES_CHKSUM = "\
+file://Licenses/Exceptions;md5=338a7cb1e52d0d1951f83e15319a3fe7 \
+file://Licenses/bsd-2-clause.txt;md5=6a31f076f5773aabd8ff86191ad6fdd5 \
+file://Licenses/bsd-3-clause.txt;md5=4a1190eac56a9db675d58ebe86eaf50c \
+file://Licenses/eCos-2.0.txt;md5=b338cb12196b5175acd3aa63b0a0805c \
+file://Licenses/gpl-2.0.txt;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+file://Licenses/ibm-pibs.txt;md5=c49502a55e35e0a8a1dc271d944d6dba \
+file://Licenses/isc.txt;md5=ec65f921308235311f34b79d844587eb \
+file://Licenses/lgpl-2.0.txt;md5=5f30f0716dfdd0d91eb439ebec522ec2 \
+file://Licenses/lgpl-2.1.txt;md5=4fbd65380cdd255951079008b364516c \
+file://Licenses/x11.txt;md5=b46f176c847b8742db02126fb8af92e2 \
+"
+
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
+
+DEFAULT_PREFERENCE_sun4i="1"
+DEFAULT_PREFERENCE_sun5i="1"
+DEFAULT_PREFERENCE_sun7i="1"
+
+SRC_URI = "git://git.denx.de/u-boot.git;branch=master \
+           file://boot.cmd"
+
+SRCREV = "df61a74e6845ec9bdcdd48d2aff5e9c2c6debeaa"
+
+PV = "v2016.03${SRCPV}"
+
+PE = "1"
+
+SPL_BINARY="u-boot-sunxi-with-spl.bin"
+
+UBOOT_ENV_SUFFIX = "scr"
+UBOOT_ENV = "boot"
+
+do_compile_append() {
+    ${S}/tools/mkimage -C none -A arm -T script -d ${WORKDIR}/boot.cmd ${WORKDIR}/${UBOOT_ENV_BINARY}
+}

recipes-bsp/u-boot/u-boot_git.bb

@@ -1,23 +0,0 @@
-require recipes-bsp/u-boot/u-boot.inc
-
-LICENSE = "GPL"
-
-# No patches for other machines yet
-COMPATIBLE_MACHINE = "(mele|olinuxino-a13|cubieboard)"
-
-DEFAULT_PREFERENCE_mele= "1"
-DEFAULT_PREFERENCE_olinuxino-a13= "1"
-DEFAULT_PREFERENCE_cubieboard="1"
-
-SRC_URI = "git://github.com/linux-sunxi/u-boot-sunxi.git;protocol=git;branch=sunxi"
-
-SRCREV = "7aa9f04f571247a6bb999c168b49e09f05b86465"
-PR = "r5"
-
-LIC_FILES_CHKSUM = "file://COPYING;md5=1707d6db1d42237583f50183a5651ecb"
-
-S = "${WORKDIR}/git"
-
-do_install_prepend() {
-	cp ${S}/spl/sunxi-spl.bin ${S}
-}

recipes-devtools/python/files/olinuxino-a10/mapping.h

@@ -0,0 +1,221 @@
+/*
+ *
+ * This file is part of pyA10Lime.
+ * mapping.h is python GPIO extension.
+ *
+ * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
+ *
+ * pyA10Lime is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MAPPING_H
+#define __MAPPING_H
+
+#include "gpio_lib.h"
+
+/**
+Structure that describe all gpio
+*/
+typedef struct _pin {
+    char name[10];          // The processor pin
+    int offset;             // Memory offset for the pin
+    int pin_number;         // Number on the connector
+}pin_t;
+
+typedef struct _gpio {
+    char connector_name[10];
+    pin_t pins[41];
+}gpio_t;
+
+
+gpio_t gpio[] = {
+    {"lcd",
+        {
+            {   "PD16", SUNXI_GPD(16),  5   },
+            {   "PD17", SUNXI_GPD(17),  6   },
+            {   "PD18", SUNXI_GPD(18),  7   },
+            {   "PD19", SUNXI_GPD(19),  8   },
+            {   "PD20", SUNXI_GPD(20),  9   },
+            {   "PD21", SUNXI_GPD(21),  10  },
+            {   "PD22", SUNXI_GPD(22),  11  },
+            {   "PD23", SUNXI_GPD(23),  12  },
+            {   "PD8",  SUNXI_GPD(8),   13  },
+            {   "PD9",  SUNXI_GPD(9),   14  },
+            {   "PD10", SUNXI_GPD(10),  15  },
+            {   "PD11", SUNXI_GPD(11),  16  },
+            {   "PD12", SUNXI_GPD(12),  17  },
+            {   "PD13", SUNXI_GPD(13),  18  },
+            {   "PD14", SUNXI_GPD(14),  19  },
+            {   "PD15", SUNXI_GPD(15),  20  },
+            {   "PD0",  SUNXI_GPD(0),   21  },
+            {   "PD1",  SUNXI_GPD(1),   22  },
+            {   "PD2",  SUNXI_GPD(2),   23  },
+            {   "PD3",  SUNXI_GPD(3),   24  },
+            {   "PD4",  SUNXI_GPD(4),   25  },
+            {   "PD5",  SUNXI_GPD(5),   26  },
+            {   "PD6",  SUNXI_GPD(6),   27  },
+            {   "PD7",  SUNXI_GPD(7),   28  },
+            {   "PD26", SUNXI_GPD(26),  29  },
+            {   "PD27", SUNXI_GPD(27),  30  },
+            {   "PD24", SUNXI_GPD(24),  31  },
+            {   "PD25", SUNXI_GPD(25),  32  },
+            {   "PH8",  SUNXI_GPH(8),   35  },
+            {   "PB2",  SUNXI_GPB(2),   36  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio1",
+        {
+            {   "PG0",  SUNXI_GPG(0),   5   },
+            {   "PG1",  SUNXI_GPG(1),   7   },
+            {   "PG2",  SUNXI_GPG(2),   9   },
+            {   "PG3",  SUNXI_GPG(3),   11  },
+            {   "PG4",  SUNXI_GPG(4),   13  },
+            {   "PG5",  SUNXI_GPG(5),   15  },
+            {   "PG6",  SUNXI_GPG(6),   17  },
+            {   "PG7",  SUNXI_GPG(7),   19  },
+            {   "PG8",  SUNXI_GPG(8),   21  },
+            {   "PG9",  SUNXI_GPG(9),   23  },
+            {   "PG10", SUNXI_GPG(10),  25  },
+            {   "PG11", SUNXI_GPG(11),  27  },
+            {   "PC3",  SUNXI_GPC(3),   29  },
+            {   "PC18", SUNXI_GPC(18),  31  },
+            {   "PC19", SUNXI_GPC(19),  33  },
+            {   "PC20", SUNXI_GPC(20),  35  },
+            {   "PC21", SUNXI_GPC(21),  37  },
+            {   "PC22", SUNXI_GPC(22),  39  },
+            {   "PC23", SUNXI_GPC(23),  40  },
+            {   "PC24", SUNXI_GPC(24),  38  },
+            {   "PB18", SUNXI_GPB(18),  36  },
+            {   "PB19", SUNXI_GPB(19),  34  },
+            {   "PB20", SUNXI_GPB(20),  32  },
+            {   "PB21", SUNXI_GPB(21),  30  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio2",
+        {
+            {   "PI0",  SUNXI_GPI(0),   9   },
+            {   "PI1",  SUNXI_GPI(1),   11  },
+            {   "PI2",  SUNXI_GPI(2),   13  },
+            {   "PI3",  SUNXI_GPI(3),   15  },
+            {   "PI4",  SUNXI_GPI(4),   17  },
+            {   "PI5",  SUNXI_GPI(5),   19  },
+            {   "PI6",  SUNXI_GPI(6),   21  },
+            {   "PI7",  SUNXI_GPI(7),   23  },
+            {   "PI8",  SUNXI_GPI(8),   25  },
+            {   "PI9",  SUNXI_GPI(9),   27  },
+            {   "PI10", SUNXI_GPI(10),  29  },
+            {   "PI11", SUNXI_GPI(11),  31  },
+            {   "PI12", SUNXI_GPI(12),  33  },
+            {   "PI13", SUNXI_GPI(13),  35  },
+            {   "PI14", SUNXI_GPI(14),  37  },
+            {   "PI15", SUNXI_GPI(15),  39  },
+            {   "PI16", SUNXI_GPI(16),  40  },
+            {   "PI17", SUNXI_GPI(17),  38  },
+            {   "PI18", SUNXI_GPI(18),  36  },
+            {   "PI19", SUNXI_GPI(19),  34  },
+            {   "PI20", SUNXI_GPI(20),  32  },
+            {   "PI21", SUNXI_GPI(21),  30  },
+            {   "PE0",  SUNXI_GPE(0),   6   },
+            {   "PE1",  SUNXI_GPE(1),   8   },
+            {   "PE2",  SUNXI_GPE(2),   10  },
+            {   "PE3",  SUNXI_GPE(3),   12  },
+            {   "PE4",  SUNXI_GPE(4),   14  },
+            {   "PE5",  SUNXI_GPE(5),   16  },
+            {   "PE6",  SUNXI_GPE(6),   18  },
+            {   "PE7",  SUNXI_GPE(7),   20  },
+            {   "PE8",  SUNXI_GPE(8),   22  },
+            {   "PE9",  SUNXI_GPE(9),   24  },
+            {   "PE10", SUNXI_GPE(10),  26  },
+            {   "PE11", SUNXI_GPE(11),  28  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio3",
+        {
+            {   "PH0",  SUNXI_GPH(0),   7   },
+            {   "PH7",  SUNXI_GPH(7),   9   },
+            {   "PH9",  SUNXI_GPH(9),   11  },
+            {   "PH10", SUNXI_GPH(10),  13  },
+            {   "PH11", SUNXI_GPH(11),  15  },
+            {   "PH12", SUNXI_GPH(12),  17  },
+            {   "PH13", SUNXI_GPH(13),  19  },
+            {   "PH14", SUNXI_GPH(14),  21  },
+            {   "PH15", SUNXI_GPH(15),  23  },
+            {   "PH16", SUNXI_GPH(16),  25  },
+            {   "PH17", SUNXI_GPH(17),  27  },
+            {   "PH18", SUNXI_GPH(18),  29  },
+            {   "PH19", SUNXI_GPH(19),  31  },
+            {   "PH20", SUNXI_GPH(20),  33  },
+            {   "PH21", SUNXI_GPH(21),  35  },
+            {   "PH22", SUNXI_GPH(22),  37  },
+            {   "PH23", SUNXI_GPH(23),  39  },
+            {   "PH24", SUNXI_GPH(24),  34  },
+            {   "PH25", SUNXI_GPH(25),  36  },
+            {   "PH26", SUNXI_GPH(26),  38  },
+            {   "PH27", SUNXI_GPH(27),  40  },
+            {   "PB3",  SUNXI_GPB(3),   6   },
+            {   "PB4",  SUNXI_GPB(4),   8   },
+            {   "PB5",  SUNXI_GPB(5),   10  },
+            {   "PB6",  SUNXI_GPB(6),   12  },
+            {   "PB7",  SUNXI_GPB(7),   14  },
+            {   "PB8",  SUNXI_GPB(8),   16  },
+            {   "PB10", SUNXI_GPB(10),  18  },
+            {   "PB11", SUNXI_GPB(11),  20  },
+            {   "PB12", SUNXI_GPB(12),  22  },
+            {   "PB13", SUNXI_GPB(13),  24  },
+            {   "PB14", SUNXI_GPB(14),  26  },
+            {   "PB15", SUNXI_GPB(15),  28  },
+            {   "PB16", SUNXI_GPB(16),  30  },
+            {   "PB17", SUNXI_GPB(17),  32  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio4",
+        {
+            {   "PC7",  SUNXI_GPC(7),   16  },
+            {   "PC16", SUNXI_GPC(16),  18  },
+            {   "PC17", SUNXI_GPC(17),  20  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"led",
+        {
+            {   "PH2",  SUNXI_GPH(2),   1},
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+};
+
+#endif

recipes-devtools/python/files/olinuxino-a10lime/mapping.h

@@ -0,0 +1,221 @@
+/*
+ *
+ * This file is part of pyA10Lime.
+ * mapping.h is python GPIO extension.
+ *
+ * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
+ *
+ * pyA10Lime is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MAPPING_H
+#define __MAPPING_H
+
+#include "gpio_lib.h"
+
+/**
+Structure that describe all gpio
+*/
+typedef struct _pin {
+    char name[10];          // The processor pin
+    int offset;             // Memory offset for the pin
+    int pin_number;         // Number on the connector
+}pin_t;
+
+typedef struct _gpio {
+    char connector_name[10];
+    pin_t pins[41];
+}gpio_t;
+
+
+gpio_t gpio[] = {
+    {"lcd",
+        {
+            {   "PD16", SUNXI_GPD(16),  5   },
+            {   "PD17", SUNXI_GPD(17),  6   },
+            {   "PD18", SUNXI_GPD(18),  7   },
+            {   "PD19", SUNXI_GPD(19),  8   },
+            {   "PD20", SUNXI_GPD(20),  9   },
+            {   "PD21", SUNXI_GPD(21),  10  },
+            {   "PD22", SUNXI_GPD(22),  11  },
+            {   "PD23", SUNXI_GPD(23),  12  },
+            {   "PD8",  SUNXI_GPD(8),   13  },
+            {   "PD9",  SUNXI_GPD(9),   14  },
+            {   "PD10", SUNXI_GPD(10),  15  },
+            {   "PD11", SUNXI_GPD(11),  16  },
+            {   "PD12", SUNXI_GPD(12),  17  },
+            {   "PD13", SUNXI_GPD(13),  18  },
+            {   "PD14", SUNXI_GPD(14),  19  },
+            {   "PD15", SUNXI_GPD(15),  20  },
+            {   "PD0",  SUNXI_GPD(0),   21  },
+            {   "PD1",  SUNXI_GPD(1),   22  },
+            {   "PD2",  SUNXI_GPD(2),   23  },
+            {   "PD3",  SUNXI_GPD(3),   24  },
+            {   "PD4",  SUNXI_GPD(4),   25  },
+            {   "PD5",  SUNXI_GPD(5),   26  },
+            {   "PD6",  SUNXI_GPD(6),   27  },
+            {   "PD7",  SUNXI_GPD(7),   28  },
+            {   "PD26", SUNXI_GPD(26),  29  },
+            {   "PD27", SUNXI_GPD(27),  30  },
+            {   "PD24", SUNXI_GPD(24),  31  },
+            {   "PD25", SUNXI_GPD(25),  32  },
+            {   "PH8",  SUNXI_GPH(8),   35  },
+            {   "PB2",  SUNXI_GPB(2),   36  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio1",
+        {
+            {   "PG0",  SUNXI_GPG(0),   5   },
+            {   "PG1",  SUNXI_GPG(1),   7   },
+            {   "PG2",  SUNXI_GPG(2),   9   },
+            {   "PG3",  SUNXI_GPG(3),   11  },
+            {   "PG4",  SUNXI_GPG(4),   13  },
+            {   "PG5",  SUNXI_GPG(5),   15  },
+            {   "PG6",  SUNXI_GPG(6),   17  },
+            {   "PG7",  SUNXI_GPG(7),   19  },
+            {   "PG8",  SUNXI_GPG(8),   21  },
+            {   "PG9",  SUNXI_GPG(9),   23  },
+            {   "PG10", SUNXI_GPG(10),  25  },
+            {   "PG11", SUNXI_GPG(11),  27  },
+            {   "PC3",  SUNXI_GPC(3),   29  },
+            {   "PC18", SUNXI_GPC(18),  31  },
+            {   "PC19", SUNXI_GPC(19),  33  },
+            {   "PC20", SUNXI_GPC(20),  35  },
+            {   "PC21", SUNXI_GPC(21),  37  },
+            {   "PC22", SUNXI_GPC(22),  39  },
+            {   "PC23", SUNXI_GPC(23),  40  },
+            {   "PC24", SUNXI_GPC(24),  38  },
+            {   "PB18", SUNXI_GPB(18),  36  },
+            {   "PB19", SUNXI_GPB(19),  34  },
+            {   "PB20", SUNXI_GPB(20),  32  },
+            {   "PB21", SUNXI_GPB(21),  30  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio2",
+        {
+            {   "PI0",  SUNXI_GPI(0),   9   },
+            {   "PI1",  SUNXI_GPI(1),   11  },
+            {   "PI2",  SUNXI_GPI(2),   13  },
+            {   "PI3",  SUNXI_GPI(3),   15  },
+            {   "PI4",  SUNXI_GPI(4),   17  },
+            {   "PI5",  SUNXI_GPI(5),   19  },
+            {   "PI6",  SUNXI_GPI(6),   21  },
+            {   "PI7",  SUNXI_GPI(7),   23  },
+            {   "PI8",  SUNXI_GPI(8),   25  },
+            {   "PI9",  SUNXI_GPI(9),   27  },
+            {   "PI10", SUNXI_GPI(10),  29  },
+            {   "PI11", SUNXI_GPI(11),  31  },
+            {   "PI12", SUNXI_GPI(12),  33  },
+            {   "PI13", SUNXI_GPI(13),  35  },
+            {   "PI14", SUNXI_GPI(14),  37  },
+            {   "PI15", SUNXI_GPI(15),  39  },
+            {   "PI16", SUNXI_GPI(16),  40  },
+            {   "PI17", SUNXI_GPI(17),  38  },
+            {   "PI18", SUNXI_GPI(18),  36  },
+            {   "PI19", SUNXI_GPI(19),  34  },
+            {   "PI20", SUNXI_GPI(20),  32  },
+            {   "PI21", SUNXI_GPI(21),  30  },
+            {   "PE0",  SUNXI_GPE(0),   6   },
+            {   "PE1",  SUNXI_GPE(1),   8   },
+            {   "PE2",  SUNXI_GPE(2),   10  },
+            {   "PE3",  SUNXI_GPE(3),   12  },
+            {   "PE4",  SUNXI_GPE(4),   14  },
+            {   "PE5",  SUNXI_GPE(5),   16  },
+            {   "PE6",  SUNXI_GPE(6),   18  },
+            {   "PE7",  SUNXI_GPE(7),   20  },
+            {   "PE8",  SUNXI_GPE(8),   22  },
+            {   "PE9",  SUNXI_GPE(9),   24  },
+            {   "PE10", SUNXI_GPE(10),  26  },
+            {   "PE11", SUNXI_GPE(11),  28  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio3",
+        {
+            {   "PH0",  SUNXI_GPH(0),   7   },
+            {   "PH7",  SUNXI_GPH(7),   9   },
+            {   "PH9",  SUNXI_GPH(9),   11  },
+            {   "PH10", SUNXI_GPH(10),  13  },
+            {   "PH11", SUNXI_GPH(11),  15  },
+            {   "PH12", SUNXI_GPH(12),  17  },
+            {   "PH13", SUNXI_GPH(13),  19  },
+            {   "PH14", SUNXI_GPH(14),  21  },
+            {   "PH15", SUNXI_GPH(15),  23  },
+            {   "PH16", SUNXI_GPH(16),  25  },
+            {   "PH17", SUNXI_GPH(17),  27  },
+            {   "PH18", SUNXI_GPH(18),  29  },
+            {   "PH19", SUNXI_GPH(19),  31  },
+            {   "PH20", SUNXI_GPH(20),  33  },
+            {   "PH21", SUNXI_GPH(21),  35  },
+            {   "PH22", SUNXI_GPH(22),  37  },
+            {   "PH23", SUNXI_GPH(23),  39  },
+            {   "PH24", SUNXI_GPH(24),  34  },
+            {   "PH25", SUNXI_GPH(25),  36  },
+            {   "PH26", SUNXI_GPH(26),  38  },
+            {   "PH27", SUNXI_GPH(27),  40  },
+            {   "PB3",  SUNXI_GPB(3),   6   },
+            {   "PB4",  SUNXI_GPB(4),   8   },
+            {   "PB5",  SUNXI_GPB(5),   10  },
+            {   "PB6",  SUNXI_GPB(6),   12  },
+            {   "PB7",  SUNXI_GPB(7),   14  },
+            {   "PB8",  SUNXI_GPB(8),   16  },
+            {   "PB10", SUNXI_GPB(10),  18  },
+            {   "PB11", SUNXI_GPB(11),  20  },
+            {   "PB12", SUNXI_GPB(12),  22  },
+            {   "PB13", SUNXI_GPB(13),  24  },
+            {   "PB14", SUNXI_GPB(14),  26  },
+            {   "PB15", SUNXI_GPB(15),  28  },
+            {   "PB16", SUNXI_GPB(16),  30  },
+            {   "PB17", SUNXI_GPB(17),  32  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio4",
+        {
+            {   "PC7",  SUNXI_GPC(7),   16  },
+            {   "PC16", SUNXI_GPC(16),  18  },
+            {   "PC17", SUNXI_GPC(17),  20  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"led",
+        {
+            {   "PH2",  SUNXI_GPH(2),   1},
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+};
+
+#endif

recipes-devtools/python/files/olinuxino-a13/mapping.h

@@ -0,0 +1,146 @@
+/*
+ *
+ * This file is part of pyA13.
+ * mapping.h is python GPIO extension.
+ *
+ * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
+ *
+ * pyA13 is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MAPPING_H
+#define __MAPPING_H
+
+#include "gpio_lib.h"
+
+/**
+Structure that describe all gpio
+*/
+typedef struct _pin {
+    char name[10];          // The processor pin
+    int offset;             // Memory offset for the pin
+    int pin_number;         // Number on the connector
+}pin_t;
+
+typedef struct _gpio {
+    char connector_name[10];
+    pin_t pins[41];
+}gpio_t;
+
+
+gpio_t gpio[] = {
+    {"lcd",
+        {
+                {   "PD18", SUNXI_GPD(18),  5   },
+                {   "PD18", SUNXI_GPD(18),  6   },
+                {   "PD18", SUNXI_GPD(18),  7   },
+                {   "PD19", SUNXI_GPD(19),  8   },
+                {   "PD20", SUNXI_GPD(20),  9   },
+                {   "PD21", SUNXI_GPD(21),  10  },
+                {   "PD22", SUNXI_GPD(22),  11  },
+                {   "PD23", SUNXI_GPD(23),  12  },
+                {   "PD10", SUNXI_GPD(10),  13  },
+                {   "PD10", SUNXI_GPD(10),  14  },
+                {   "PD10", SUNXI_GPD(10),  15  },
+                {   "PD11", SUNXI_GPD(11),  16  },
+                {   "PD12", SUNXI_GPD(12),  17  },
+                {   "PD13", SUNXI_GPD(13),  18  },
+                {   "PD14", SUNXI_GPD(14),  19  },
+                {   "PD15", SUNXI_GPD(15),  20  },
+                {   "PD2",  SUNXI_GPD(2),   21  },
+                {   "PD2",  SUNXI_GPD(2),   22  },
+                {   "PD2",  SUNXI_GPD(2),   23  },
+                {   "PD3",  SUNXI_GPD(3),   24  },
+                {   "PD4",  SUNXI_GPD(4),   25  },
+                {   "PD5",  SUNXI_GPD(5),   26  },
+                {   "PD6",  SUNXI_GPD(6),   27  },
+                {   "PD7",  SUNXI_GPD(7),   28  },
+                {   "PD26", SUNXI_GPD(26),  29  },
+                {   "PD27", SUNXI_GPD(27),  30  },
+                {   "PD24", SUNXI_GPD(24),  31  },
+                {   "PD25", SUNXI_GPD(25),  32  },
+                {   "PB3",  SUNXI_GPB(3),   33  },
+                {   "PB4",  SUNXI_GPB(4),   34  },
+                {   "PB10", SUNXI_GPB(10),  35  },
+                {   "PB2",  SUNXI_GPB(2),   36  },
+                {
+                    {   0,  0,  0}
+                },
+        }
+    },
+    {"gpio2",
+        {
+            {   "PB0",  SUNXI_GPB(0),   5   },
+            {   "PG11", SUNXI_GPG(11),  6   },
+            {   "PB1",  SUNXI_GPB(1),   7   },
+            {   "PG10", SUNXI_GPG(10),  8   },
+            {   "PB2",  SUNXI_GPB(2),   9   },
+            {   "PG9",  SUNXI_GPG(9),   10  },
+            {   "PB3",  SUNXI_GPB(3),   11  },
+            {   "PE11", SUNXI_GPE(11),  12  },
+            {   "PB4",  SUNXI_GPB(4),   13  },
+            {   "PE10", SUNXI_GPE(10),  14  },
+            {   "PB10", SUNXI_GPB(10),  15  },
+            {   "PE9",  SUNXI_GPE(9),   16  },
+            {   "PB15", SUNXI_GPB(15),  17  },
+            {   "PE8",  SUNXI_GPE(8),   18  },
+            {   "PB16", SUNXI_GPB(16),  19  },
+            {   "PE7",  SUNXI_GPE(7),   20  },
+            {   "PC0",  SUNXI_GPC(0),   21  },
+            {   "PE6",  SUNXI_GPE(6),   22  },
+            {   "PC1",  SUNXI_GPC(1),   23  },
+            {   "PE5",  SUNXI_GPE(5),   24  },
+            {   "PC2",  SUNXI_GPC(2),   25  },
+            {   "PE4",  SUNXI_GPE(4),   26  },
+            {   "PC3",  SUNXI_GPC(3),   27  },
+            {   "PC19", SUNXI_GPC(19),  28  },
+            {   "PC4",  SUNXI_GPC(4),   29  },
+            {   "PC15", SUNXI_GPC(15),  30  },
+            {   "PC5",  SUNXI_GPC(5),   31  },
+            {   "PC14", SUNXI_GPC(14),  32  },
+            {   "PC6",  SUNXI_GPC(6),   33  },
+            {   "PC13", SUNXI_GPC(13),  34  },
+            {   "PC7",  SUNXI_GPC(7),   35  },
+            {   "PC12", SUNXI_GPC(12),  36  },
+            {   "PC8",  SUNXI_GPC(8),   37  },
+            {   "PC11", SUNXI_GPC(11),  38  },
+            {   "PC9",  SUNXI_GPC(9),   39  },
+            {   "PC10", SUNXI_GPC(10),  40  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+    {"uext",
+        {
+            {   "PG3",  SUNXI_GPG(3),   3   },
+            {   "PG3",  SUNXI_GPG(4),   4   },
+            {   "PB17", SUNXI_GPB(17),  5   },
+            {   "PB18", SUNXI_GPB(18),  6   },
+            {   "PE3",  SUNXI_GPE(3),   7   },
+            {   "PE2",  SUNXI_GPE(2),   8   },
+            {   "PE1",  SUNXI_GPE(1),   9   },
+            {   "PE0",  SUNXI_GPE(0),   10  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+};
+
+
+
+#endif

recipes-devtools/python/files/olinuxino-a13som/mapping.h

@@ -0,0 +1,147 @@
+/*
+ *
+ * This file is part of pyA13SOM.
+ * mapping.h is python GPIO extension.
+ *
+ * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
+ *
+ * pyA13SOM is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MAPPING_H
+#define __MAPPING_H
+
+#include "gpio_lib.h"
+
+/**
+Structure that describe all gpio
+*/
+typedef struct _pin {
+    char name[10];          // The processor pin
+    int offset;             // Memory offset for the pin
+    int pin_number;         // Number on the connector
+}pin_t;
+
+typedef struct _gpio {
+    char connector_name[10];
+    pin_t pins[41];
+}gpio_t;
+
+
+gpio_t gpio[] = {
+    {"lcd",
+        {
+            {   "PD18", SUNXI_GPD(18),  5   },
+            {   "PD18", SUNXI_GPD(18),  6   },
+            {   "PD18", SUNXI_GPD(18),  7   },
+            {   "PD19", SUNXI_GPD(19),  8   },
+            {   "PD20", SUNXI_GPD(20),  9   },
+            {   "PD21", SUNXI_GPD(21),  10  },
+            {   "PD22", SUNXI_GPD(22),  11  },
+            {   "PD23", SUNXI_GPD(23),  12  },
+            {   "PD10", SUNXI_GPD(10),  13  },
+            {   "PD10", SUNXI_GPD(10),  14  },
+            {   "PD10", SUNXI_GPD(10),  15  },
+            {   "PD11", SUNXI_GPD(11),  16  },
+            {   "PD12", SUNXI_GPD(12),  17  },
+            {   "PD13", SUNXI_GPD(13),  18  },
+            {   "PD14", SUNXI_GPD(14),  19  },
+            {   "PD15", SUNXI_GPD(15),  20  },
+            {   "PD2",  SUNXI_GPD(2),   21  },
+            {   "PD2",  SUNXI_GPD(2),   22  },
+            {   "PD2",  SUNXI_GPD(2),   23  },
+            {   "PD3",  SUNXI_GPD(3),   24  },
+            {   "PD4",  SUNXI_GPD(4),   25  },
+            {   "PD5",  SUNXI_GPD(5),   26  },
+            {   "PD6",  SUNXI_GPD(6),   27  },
+            {   "PD7",  SUNXI_GPD(7),   28  },
+            {   "PD26", SUNXI_GPD(26),  29  },
+            {   "PD27", SUNXI_GPD(27),  30  },
+            {   "PD24", SUNXI_GPD(24),  31  },
+            {   "PD25", SUNXI_GPD(25),  32  },
+            {   "PB3",  SUNXI_GPB(3),   33  },
+            {   "PB4",  SUNXI_GPB(4),   34  },
+            {   "PB10", SUNXI_GPB(10),  35  },
+            {   "PB2",  SUNXI_GPB(2),   36  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+    {"gpio1",
+        {
+            {   "PB0",  SUNXI_GPB(0),   5   },
+            {   "PG11", SUNXI_GPG(11),  6   },
+            {   "PB1",  SUNXI_GPB(1),   7   },
+            {   "PG10", SUNXI_GPG(10),  8   },
+            {   "PB2",  SUNXI_GPB(2),   9   },
+            {   "PG9",  SUNXI_GPG(9),   10  },
+            {   "PB3",  SUNXI_GPB(3),   11  },
+            {   "PE11", SUNXI_GPE(11),  12  },
+            {   "PB4",  SUNXI_GPB(4),   13  },
+            {   "PE10", SUNXI_GPE(10),  14  },
+            {   "PB10", SUNXI_GPB(10),  15  },
+            {   "PE9",  SUNXI_GPE(9),   16  },
+            {   "PB15", SUNXI_GPB(15),  17  },
+            {   "PE8",  SUNXI_GPE(8),   18  },
+            {   "PB16", SUNXI_GPB(16),  19  },
+            {   "PE7",  SUNXI_GPE(7),   20  },
+            {   "PC0",  SUNXI_GPC(0),   21  },
+            {   "PE6",  SUNXI_GPE(6),   22  },
+            {   "PC1",  SUNXI_GPC(1),   23  },
+            {   "PE5",  SUNXI_GPE(5),   24  },
+            {   "PC2",  SUNXI_GPC(2),   25  },
+            {   "PE4",  SUNXI_GPE(4),   26  },
+            {   "PC3",  SUNXI_GPC(3),   27  },
+            {   "PC19", SUNXI_GPC(19),  28  },
+            {   "PC4",  SUNXI_GPC(4),   29  },
+            {   "PC15", SUNXI_GPC(15),  30  },
+            {   "PC5",  SUNXI_GPC(5),   31  },
+            {   "PC14", SUNXI_GPC(14),  32  },
+            {   "PC6",  SUNXI_GPC(6),   33  },
+            {   "PC13", SUNXI_GPC(13),  34  },
+            {   "PC7",  SUNXI_GPC(7),   35  },
+            {   "PC12", SUNXI_GPC(12),  36  },
+            {   "PC8",  SUNXI_GPC(8),   37  },
+            {   "PC11", SUNXI_GPC(11),  38  },
+            {   "PC9",  SUNXI_GPC(9),   39  },
+            {   "PC10", SUNXI_GPC(10),  40  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+    {"gpio3",
+        {
+            {   "PE0",  SUNXI_GPE(0),   1   },
+            {   "PG1",  SUNXI_GPG(1),   2   },
+            {   "PE1",  SUNXI_GPE(1),   3   },
+            {   "PG2",  SUNXI_GPG(2),   4   },
+            {   "PE2",  SUNXI_GPE(2),   5   },
+            {   "PG12", SUNXI_GPG(12),  6   },
+            {   "PE3",  SUNXI_GPE(3),   7   },
+            {   "PB17", SUNXI_GPB(17),  8   },
+            {   "PB18", SUNXI_GPB(18),  10  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+};
+
+
+
+#endif

recipes-devtools/python/files/olinuxino-a20/mapping.h

@@ -0,0 +1,303 @@
+/*
+ *
+ * This file is part of pyA20.
+ * mapping.h is python GPIO extension.
+ *
+ * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
+ *
+ * pyA20 is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MAPPING_H
+#define __MAPPING_H
+
+#include "gpio_lib.h"
+
+/**
+Structure that describe all gpio
+*/
+typedef struct _pin {
+    char name[10];          // The processor pin
+    int offset;             // Memory offset for the pin
+    int pin_number;         // Number on the connector
+}pin_t;
+
+typedef struct _gpio {
+    char connector_name[10];
+    pin_t pins[41];
+}gpio_t;
+
+
+gpio_t gpio[] = {
+    {"lcd",
+        {
+                {   "PD16", SUNXI_GPD(16),  5   },
+                {   "PD17", SUNXI_GPD(17),  6   },
+                {   "PD18", SUNXI_GPD(18),  7   },
+                {   "PD19", SUNXI_GPD(19),  8   },
+                {   "PD20", SUNXI_GPD(20),  9   },
+                {   "PD21", SUNXI_GPD(21),  10  },
+                {   "PD22", SUNXI_GPD(22),  11  },
+                {   "PD23", SUNXI_GPD(23),  12  },
+                {   "PD8",  SUNXI_GPD(8),   13  },
+                {   "PD9",  SUNXI_GPD(9),   14  },
+                {   "PD10", SUNXI_GPD(10),  15  },
+                {   "PD11", SUNXI_GPD(11),  16  },
+                {   "PD12", SUNXI_GPD(12),  17  },
+                {   "PD13", SUNXI_GPD(13),  18  },
+                {   "PD14", SUNXI_GPD(14),  19  },
+                {   "PD15", SUNXI_GPD(15),  20  },
+                {   "PD0",  SUNXI_GPD(0),   21  },
+                {   "PD1",  SUNXI_GPD(1),   22  },
+                {   "PD2",  SUNXI_GPD(2),   23  },
+                {   "PD3",  SUNXI_GPD(3),   24  },
+                {   "PD4",  SUNXI_GPD(4),   25  },
+                {   "PD5",  SUNXI_GPD(5),   26  },
+                {   "PD6",  SUNXI_GPD(6),   27  },
+                {   "PD7",  SUNXI_GPD(7),   28  },
+                {   "PD26", SUNXI_GPD(26),  29  },
+                {   "PD27", SUNXI_GPD(27),  30  },
+                {   "PD24", SUNXI_GPD(24),  31  },
+                {   "PD25", SUNXI_GPD(25),  32  },
+                {   "PH8",  SUNXI_GPH(8),    35  },
+                {   "PB2",  SUNXI_GPB(2),   36  },
+                {
+                    {   0,  0,  0}
+                },
+        }
+    },
+    /*
+    #define PIN_PG0		SUNXI_GPG(0)
+#define PIN_PG1		SUNXI_GPG(1)
+#define PIN_PG2		SUNXI_GPG(2)
+#define PIN_PG3		SUNXI_GPG(3)
+#define PIN_PG4		SUNXI_GPG(4)
+#define PIN_PG5		SUNXI_GPG(5)
+#define PIN_PG6		SUNXI_GPG(6)
+#define PIN_PG7		SUNXI_GPG(7)
+#define PIN_PG8		SUNXI_GPG(8)
+#define PIN_PG9		SUNXI_GPG(9)
+#define PIN_PG10	SUNXI_GPG(10)
+#define PIN_PG11	SUNXI_GPG(11)
+*/  {"gpio1",
+        {
+            {   "PG0",  SUNXI_GPG(0),   5   },
+            {   "PG1",  SUNXI_GPG(0),   7   },
+            {   "PG2",  SUNXI_GPG(0),   9   },
+            {   "PG3",  SUNXI_GPG(0),   11  },
+            {   "PG4",  SUNXI_GPG(0),   13  },
+            {   "PG5",  SUNXI_GPG(0),   15  },
+            {   "PG6",  SUNXI_GPG(0),   17  },
+            {   "PG7",  SUNXI_GPG(0),   19  },
+            {   "PG8",  SUNXI_GPG(0),   21  },
+            {   "PG9",  SUNXI_GPG(0),   23  },
+            {   "PG10", SUNXI_GPG(0),   25  },
+            {   "PG11", SUNXI_GPG(0),   27  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    /*
+    //GPIO 2
+#define PIN_PE0		SUNXI_GPE(0)
+#define PIN_PE1		SUNXI_GPE(1)
+#define PIN_PI0		SUNXI_GPI(0)
+#define PIN_PE2		SUNXI_GPE(2)
+#define PIN_PI1		SUNXI_GPI(1)
+#define PIN_PE3		SUNXI_GPE(3)
+#define PIN_PI2		SUNXI_GPI(2)
+#define PIN_PE4		SUNXI_GPE(4)
+#define PIN_PI3		SUNXI_GPI(3)
+#define PIN_PE5		SUNXI_GPE(5)
+#define PIN_PI10	SUNXI_GPI(10)
+#define PIN_PE6		SUNXI_GPE(6)
+#define PIN_PI11	SUNXI_GPI(11)
+#define PIN_PE7		SUNXI_GPE(7)
+#define PIN_PC3		SUNXI_GPC(3)
+#define PIN_PE8		SUNXI_GPE(8)
+#define PIN_PC7		SUNXI_GPC(7)
+#define PIN_PE9		SUNXI_GPE(9)
+#define PIN_PC16	SUNXI_GPC(16)
+#define PIN_PE10	SUNXI_GPE(10)
+#define PIN_PC17	SUNXI_GPC(17)
+#define PIN_PE11	SUNXI_GPE(11)
+#define PIN_PC18	SUNXI_GPC(18)
+#define PIN_PI14	SUNXI_GPI(14)
+#define PIN_PC23	SUNXI_GPC(23)
+#define PIN_PI15	SUNXI_GPI(15)
+#define PIN_PC24	SUNXI_GPC(24)
+#define PIN_PB23	SUNXI_GPB(23)
+#define PIN_PB22	SUNXI_GPB(22)
+*/
+    {"gpio2",
+        {
+            {   "PE0",  SUNXI_GPE(0),   6   },
+            {   "PE1",  SUNXI_GPE(1),   8   },
+            {   "PI0",  SUNXI_GPI(0),   9   },
+            {   "PE2",  SUNXI_GPE(2),   10  },
+            {   "PI1",  SUNXI_GPI(1),   11  },
+            {   "PE3",  SUNXI_GPE(3),   12  },
+            {   "PI2",  SUNXI_GPI(2),   13  },
+            {   "PE4",  SUNXI_GPE(4),   14  },
+            {   "PI3",  SUNXI_GPI(3),   15  },
+            {   "PE5",  SUNXI_GPE(5),   16  },
+            {   "PI10", SUNXI_GPI(10),  17  },
+            {   "PE6",  SUNXI_GPE(6),   18  },
+            {   "PI11", SUNXI_GPI(11),  19  },
+            {   "PE7",  SUNXI_GPE(7),   20  },
+            {   "PC3",  SUNXI_GPC(3),   21  },
+            {   "PE8",  SUNXI_GPE(8),   22  },
+            {   "PC7",  SUNXI_GPC(7),   23  },
+            {   "PE9",  SUNXI_GPE(9),   24  },
+            {   "PC16", SUNXI_GPC(16),  25  },
+            {   "PE10", SUNXI_GPE(10),  26  },
+            {   "PC17", SUNXI_GPC(17),  27  },
+            {   "PE11", SUNXI_GPE(11),  28  },
+            {   "PC18", SUNXI_GPC(18),  29  },
+            {   "PI14", SUNXI_GPI(14),  30  },
+            {   "PC23", SUNXI_GPC(23),  31  },
+            {   "PI15", SUNXI_GPI(15),  32  },
+            {   "PC24", SUNXI_GPC(24),  33  },
+            {   "PB23", SUNXI_GPB(23),  34  },
+            {   "PB22", SUNXI_GPB(22),  36  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+/*
+//GPIO 3
+#define PIN_PH0		SUNXI_GPH(0)
+#define PIN_PB3		SUNXI_GPB(3)
+#define PIN_PH2		SUNXI_GPH(2)
+#define PIN_PB4		SUNXI_GPB(4)
+#define PIN_PH7		SUNXI_GPH(7)
+#define PIN_PB5		SUNXI_GPB(5)
+#define PIN_PH9		SUNXI_GPH(9)
+#define PIN_PB6		SUNXI_GPB(6)
+#define PIN_PH10	SUNXI_GPH(10)
+#define PIN_PB7		SUNXI_GPB(7)
+#define PIN_PH11	SUNXI_GPH(11)
+#define PIN_PB8		SUNXI_GPB(8)
+#define PIN_PH12	SUNXI_GPH(12)
+#define PIN_PB10	SUNXI_GPB(10)
+#define PIN_PH13	SUNXI_GPH(13)
+#define PIN_PB11	SUNXI_GPB(11)
+#define PIN_PH14	SUNXI_GPH(14)
+#define PIN_PB12	SUNXI_GPB(12)
+#define PIN_PH15	SUNXI_GPH(15)
+#define PIN_PB13	SUNXI_GPB(13)
+#define PIN_PH16	SUNXI_GPH(16)
+#define PIN_PB14	SUNXI_GPB(14)
+#define PIN_PH17	SUNXI_GPH(17)
+#define PIN_PB15	SUNXI_GPB(15)
+#define PIN_PH18	SUNXI_GPH(18)
+#define PIN_PB16	SUNXI_GPB(16)
+#define PIN_PH19	SUNXI_GPH(19)
+#define PIN_PB17	SUNXI_GPB(17)
+#define PIN_PH20	SUNXI_GPH(20)
+#define PIN_PH24	SUNXI_GPH(24)
+#define PIN_PH21	SUNXI_GPH(21)
+#define PIN_PH25	SUNXI_GPH(25)
+#define PIN_PH22	SUNXI_GPH(22)
+#define PIN_PH26	SUNXI_GPH(26)
+#define PIN_PH23	SUNXI_GPH(23)
+#define PIN_PH27	SUNXI_GPH(27)
+*/
+    {"gpio3",
+        {
+            {   "PH0",  SUNXI_GPH(0),   5   },
+            {   "PB3",  SUNXI_GPB(3),   6   },
+            {   "PH2",  SUNXI_GPH(2),   7   },
+            {   "PB4",  SUNXI_GPB(4),   8   },
+            {   "PH7",  SUNXI_GPH(7),   9   },
+            {   "PB5",  SUNXI_GPB(5),   10  },
+            {   "PH9",  SUNXI_GPH(9),   11  },
+            {   "PB6",  SUNXI_GPB(6),   12  },
+            {   "PH10", SUNXI_GPH(10),  13  },
+            {   "PB7",  SUNXI_GPB(7),   14  },
+            {   "PH11", SUNXI_GPH(11),  15  },
+            {   "PB8",  SUNXI_GPB(8),   16  },
+            {   "PH12", SUNXI_GPH(12),  17  },
+            {   "PB10", SUNXI_GPB(10),  18  },
+            {   "PH13", SUNXI_GPH(13),  19  },
+            {   "PB11", SUNXI_GPB(11),  20  },
+            {   "PH14", SUNXI_GPH(14),  21  },
+            {   "PB12", SUNXI_GPB(12),  22  },
+            {   "PH15", SUNXI_GPH(15),  23  },
+            {   "PB13", SUNXI_GPB(13),  24  },
+            {   "PH16", SUNXI_GPH(16),  25  },
+            {   "PB14", SUNXI_GPB(14),  26  },
+            {   "PH17", SUNXI_GPH(17),  27  },
+            {   "PB15", SUNXI_GPB(15),  28  },
+            {   "PH18", SUNXI_GPH(18),  29  },
+            {   "PB16", SUNXI_GPB(16),  30  },
+            {   "PH19", SUNXI_GPH(19),  31  },
+            {   "PB17", SUNXI_GPB(17),  32  },
+            {   "PH20", SUNXI_GPH(20),  33  },
+            {   "PH24", SUNXI_GPH(24),  34  },
+            {   "PH21", SUNXI_GPH(21),  35  },
+            {   "PH25", SUNXI_GPH(25),  36  },
+            {   "PH22", SUNXI_GPH(22),  37  },
+            {   "PH26", SUNXI_GPH(26),  38  },
+            {   "PH23", SUNXI_GPH(23),  39  },
+            {   "PH27", SUNXI_GPH(27),  40  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+
+    {"uext1",
+        {
+            {   "PI12", SUNXI_GPI(12),   3   },
+            {   "PI13", SUNXI_GPI(13),   4   },
+            {   "PB20", SUNXI_GPB(20),   5   },
+            {   "PB21", SUNXI_GPB(21),   6   },
+            {   "PC22", SUNXI_GPC(22),   7   },
+            {   "PC21", SUNXI_GPC(21),   8   },
+            {   "PC20", SUNXI_GPC(20),   9   },
+            {   "PC19", SUNXI_GPC(19),   10  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"uext2",
+        {
+            {   "PI20", SUNXI_GPI(20),   3   },
+            {   "PI21", SUNXI_GPI(21),   4   },
+            {   "PB18", SUNXI_GPB(18),   5   },
+            {   "PB19", SUNXI_GPB(19),   6   },
+            {   "PI19", SUNXI_GPI(19),   7   },
+            {   "PI18", SUNXI_GPI(18),   8   },
+            {   "PI17", SUNXI_GPI(17),   9   },
+            {   "PI16", SUNXI_GPI(16),   10  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+};
+
+
+
+#endif

recipes-devtools/python/files/olinuxino-a20lime/mapping.h

@@ -0,0 +1,221 @@
+/*
+ *
+ * This file is part of pyA20Lime.
+ * mapping.h is python GPIO extension.
+ *
+ * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
+ *
+ * pyA20Lime is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MAPPING_H
+#define __MAPPING_H
+
+#include "gpio_lib.h"
+
+/**
+Structure that describe all gpio
+*/
+typedef struct _pin {
+    char name[10];          // The processor pin
+    int offset;             // Memory offset for the pin
+    int pin_number;         // Number on the connector
+}pin_t;
+
+typedef struct _gpio {
+    char connector_name[10];
+    pin_t pins[41];
+}gpio_t;
+
+
+gpio_t gpio[] = {
+    {"lcd",
+        {
+            {   "PD16", SUNXI_GPD(16),  5   },
+            {   "PD17", SUNXI_GPD(17),  6   },
+            {   "PD18", SUNXI_GPD(18),  7   },
+            {   "PD19", SUNXI_GPD(19),  8   },
+            {   "PD20", SUNXI_GPD(20),  9   },
+            {   "PD21", SUNXI_GPD(21),  10  },
+            {   "PD22", SUNXI_GPD(22),  11  },
+            {   "PD23", SUNXI_GPD(23),  12  },
+            {   "PD8",  SUNXI_GPD(8),   13  },
+            {   "PD9",  SUNXI_GPD(9),   14  },
+            {   "PD10", SUNXI_GPD(10),  15  },
+            {   "PD11", SUNXI_GPD(11),  16  },
+            {   "PD12", SUNXI_GPD(12),  17  },
+            {   "PD13", SUNXI_GPD(13),  18  },
+            {   "PD14", SUNXI_GPD(14),  19  },
+            {   "PD15", SUNXI_GPD(15),  20  },
+            {   "PD0",  SUNXI_GPD(0),   21  },
+            {   "PD1",  SUNXI_GPD(1),   22  },
+            {   "PD2",  SUNXI_GPD(2),   23  },
+            {   "PD3",  SUNXI_GPD(3),   24  },
+            {   "PD4",  SUNXI_GPD(4),   25  },
+            {   "PD5",  SUNXI_GPD(5),   26  },
+            {   "PD6",  SUNXI_GPD(6),   27  },
+            {   "PD7",  SUNXI_GPD(7),   28  },
+            {   "PD26", SUNXI_GPD(26),  29  },
+            {   "PD27", SUNXI_GPD(27),  30  },
+            {   "PD24", SUNXI_GPD(24),  31  },
+            {   "PD25", SUNXI_GPD(25),  32  },
+            {   "PH8",  SUNXI_GPH(8),   35  },
+            {   "PB2",  SUNXI_GPB(2),   36  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio1",
+        {
+            {   "PG0",  SUNXI_GPG(0),   5   },
+            {   "PG1",  SUNXI_GPG(1),   7   },
+            {   "PG2",  SUNXI_GPG(2),   9   },
+            {   "PG3",  SUNXI_GPG(3),   11  },
+            {   "PG4",  SUNXI_GPG(4),   13  },
+            {   "PG5",  SUNXI_GPG(5),   15  },
+            {   "PG6",  SUNXI_GPG(6),   17  },
+            {   "PG7",  SUNXI_GPG(7),   19  },
+            {   "PG8",  SUNXI_GPG(8),   21  },
+            {   "PG9",  SUNXI_GPG(9),   23  },
+            {   "PG10", SUNXI_GPG(10),  25  },
+            {   "PG11", SUNXI_GPG(11),  27  },
+            {   "PC3",  SUNXI_GPC(3),   29  },
+            {   "PC18", SUNXI_GPC(18),  31  },
+            {   "PC19", SUNXI_GPC(19),  33  },
+            {   "PC20", SUNXI_GPC(20),  35  },
+            {   "PC21", SUNXI_GPC(21),  37  },
+            {   "PC22", SUNXI_GPC(22),  39  },
+            {   "PC23", SUNXI_GPC(23),  40  },
+            {   "PC24", SUNXI_GPC(24),  38  },
+            {   "PB18", SUNXI_GPB(18),  36  },
+            {   "PB19", SUNXI_GPB(19),  34  },
+            {   "PB20", SUNXI_GPB(20),  32  },
+            {   "PB21", SUNXI_GPB(21),  30  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio2",
+        {
+            {   "PI0",  SUNXI_GPI(0),   9   },
+            {   "PI1",  SUNXI_GPI(1),   11  },
+            {   "PI2",  SUNXI_GPI(2),   13  },
+            {   "PI3",  SUNXI_GPI(3),   15  },
+            {   "PI4",  SUNXI_GPI(4),   17  },
+            {   "PI5",  SUNXI_GPI(5),   19  },
+            {   "PI6",  SUNXI_GPI(6),   21  },
+            {   "PI7",  SUNXI_GPI(7),   23  },
+            {   "PI8",  SUNXI_GPI(8),   25  },
+            {   "PI9",  SUNXI_GPI(9),   27  },
+            {   "PI10", SUNXI_GPI(10),  29  },
+            {   "PI11", SUNXI_GPI(11),  31  },
+            {   "PI12", SUNXI_GPI(12),  33  },
+            {   "PI13", SUNXI_GPI(13),  35  },
+            {   "PI14", SUNXI_GPI(14),  37  },
+            {   "PI15", SUNXI_GPI(15),  39  },
+            {   "PI16", SUNXI_GPI(16),  40  },
+            {   "PI17", SUNXI_GPI(17),  38  },
+            {   "PI18", SUNXI_GPI(18),  36  },
+            {   "PI19", SUNXI_GPI(19),  34  },
+            {   "PI20", SUNXI_GPI(20),  32  },
+            {   "PI21", SUNXI_GPI(21),  30  },
+            {   "PE0",  SUNXI_GPE(0),   6   },
+            {   "PE1",  SUNXI_GPE(1),   8   },
+            {   "PE2",  SUNXI_GPE(2),   10  },
+            {   "PE3",  SUNXI_GPE(3),   12  },
+            {   "PE4",  SUNXI_GPE(4),   14  },
+            {   "PE5",  SUNXI_GPE(5),   16  },
+            {   "PE6",  SUNXI_GPE(6),   18  },
+            {   "PE7",  SUNXI_GPE(7),   20  },
+            {   "PE8",  SUNXI_GPE(8),   22  },
+            {   "PE9",  SUNXI_GPE(9),   24  },
+            {   "PE10", SUNXI_GPE(10),  26  },
+            {   "PE11", SUNXI_GPE(11),  28  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio3",
+        {
+            {   "PH0",  SUNXI_GPH(0),   7   },
+            {   "PH7",  SUNXI_GPH(7),   9   },
+            {   "PH9",  SUNXI_GPH(9),   11  },
+            {   "PH10", SUNXI_GPH(10),  13  },
+            {   "PH11", SUNXI_GPH(11),  15  },
+            {   "PH12", SUNXI_GPH(12),  17  },
+            {   "PH13", SUNXI_GPH(13),  19  },
+            {   "PH14", SUNXI_GPH(14),  21  },
+            {   "PH15", SUNXI_GPH(15),  23  },
+            {   "PH16", SUNXI_GPH(16),  25  },
+            {   "PH17", SUNXI_GPH(17),  27  },
+            {   "PH18", SUNXI_GPH(18),  29  },
+            {   "PH19", SUNXI_GPH(19),  31  },
+            {   "PH20", SUNXI_GPH(20),  33  },
+            {   "PH21", SUNXI_GPH(21),  35  },
+            {   "PH22", SUNXI_GPH(22),  37  },
+            {   "PH23", SUNXI_GPH(23),  39  },
+            {   "PH24", SUNXI_GPH(24),  34  },
+            {   "PH25", SUNXI_GPH(25),  36  },
+            {   "PH26", SUNXI_GPH(26),  38  },
+            {   "PH27", SUNXI_GPH(27),  40  },
+            {   "PB3",  SUNXI_GPB(3),   6   },
+            {   "PB4",  SUNXI_GPB(4),   8   },
+            {   "PB5",  SUNXI_GPB(5),   10  },
+            {   "PB6",  SUNXI_GPB(6),   12  },
+            {   "PB7",  SUNXI_GPB(7),   14  },
+            {   "PB8",  SUNXI_GPB(8),   16  },
+            {   "PB10", SUNXI_GPB(10),  18  },
+            {   "PB11", SUNXI_GPB(11),  20  },
+            {   "PB12", SUNXI_GPB(12),  22  },
+            {   "PB13", SUNXI_GPB(13),  24  },
+            {   "PB14", SUNXI_GPB(14),  26  },
+            {   "PB15", SUNXI_GPB(15),  28  },
+            {   "PB16", SUNXI_GPB(16),  30  },
+            {   "PB17", SUNXI_GPB(17),  32  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio4",
+        {
+            {   "PC7",  SUNXI_GPC(7),   16  },
+            {   "PC16", SUNXI_GPC(16),  18  },
+            {   "PC17", SUNXI_GPC(17),  20  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"led",
+        {
+            {   "PH2",  SUNXI_GPH(2),   1},
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+};
+
+#endif

recipes-devtools/python/files/olinuxino-a20lime2/mapping.h

@@ -0,0 +1,224 @@
+/*
+ *
+ * This file is part of pyA20Lime2.
+ * mapping.h is python GPIO extension.
+ *
+ * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
+ *
+ * pyA20Lime2 is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MAPPING_H
+#define __MAPPING_H
+
+#include "gpio_lib.h"
+
+/**
+Structure that describe all gpio
+*/
+typedef struct _pin {
+    char name[10];          // The processor pin
+    int offset;             // Memory offset for the pin
+    int pin_number;         // Number on the connector
+}pin_t;
+
+typedef struct _gpio {
+    char connector_name[10];
+    pin_t pins[41];
+}gpio_t;
+
+
+gpio_t gpio[] = {
+    {"lcd",
+        {
+            {   "PD16", SUNXI_GPD(16),  5   },
+            {   "PD17", SUNXI_GPD(17),  6   },
+            {   "PD18", SUNXI_GPD(18),  7   },
+            {   "PD19", SUNXI_GPD(19),  8   },
+            {   "PD20", SUNXI_GPD(20),  9   },
+            {   "PD21", SUNXI_GPD(21),  10  },
+            {   "PD22", SUNXI_GPD(22),  11  },
+            {   "PD23", SUNXI_GPD(23),  12  },
+            {   "PD8",  SUNXI_GPD(8),   13  },
+            {   "PD9",  SUNXI_GPD(9),   14  },
+            {   "PD10", SUNXI_GPD(10),  15  },
+            {   "PD11", SUNXI_GPD(11),  16  },
+            {   "PD12", SUNXI_GPD(12),  17  },
+            {   "PD13", SUNXI_GPD(13),  18  },
+            {   "PD14", SUNXI_GPD(14),  19  },
+            {   "PD15", SUNXI_GPD(15),  20  },
+            {   "PD0",  SUNXI_GPD(0),   21  },
+            {   "PD1",  SUNXI_GPD(1),   22  },
+            {   "PD2",  SUNXI_GPD(2),   23  },
+            {   "PD3",  SUNXI_GPD(3),   24  },
+            {   "PD4",  SUNXI_GPD(4),   25  },
+            {   "PD5",  SUNXI_GPD(5),   26  },
+            {   "PD6",  SUNXI_GPD(6),   27  },
+            {   "PD7",  SUNXI_GPD(7),   28  },
+            {   "PD26", SUNXI_GPD(26),  29  },
+            {   "PD27", SUNXI_GPD(27),  30  },
+            {   "PD24", SUNXI_GPD(24),  31  },
+            {   "PD25", SUNXI_GPD(25),  32  },
+            {   "PH8",  SUNXI_GPH(8),   35  },
+            {   "PB2",  SUNXI_GPB(2),   36  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio1",
+        {
+            {   "PG0",  SUNXI_GPG(0),   5   },
+            {   "PG1",  SUNXI_GPG(1),   7   },
+            {   "PG2",  SUNXI_GPG(2),   9   },
+            {   "PG3",  SUNXI_GPG(3),   11  },
+            {   "PG4",  SUNXI_GPG(4),   13  },
+            {   "PG5",  SUNXI_GPG(5),   15  },
+            {   "PG6",  SUNXI_GPG(6),   17  },
+            {   "PG7",  SUNXI_GPG(7),   19  },
+            {   "PG8",  SUNXI_GPG(8),   21  },
+            {   "PG9",  SUNXI_GPG(9),   23  },
+            {   "PG10", SUNXI_GPG(10),  25  },
+            {   "PG11", SUNXI_GPG(11),  27  },
+            {   "PC3",  SUNXI_GPC(3),   29  },
+            {   "PC18", SUNXI_GPC(18),  31  },
+            {   "PC19", SUNXI_GPC(19),  33  },
+            {   "PC20", SUNXI_GPC(20),  35  },
+            {   "PC21", SUNXI_GPC(21),  37  },
+            {   "PC22", SUNXI_GPC(22),  39  },
+            {   "PC23", SUNXI_GPC(23),  40  },
+            {   "PC24", SUNXI_GPC(24),  38  },
+            {   "PB18", SUNXI_GPB(18),  36  },
+            {   "PB19", SUNXI_GPB(19),  34  },
+            {   "PB20", SUNXI_GPB(20),  32  },
+            {   "PB21", SUNXI_GPB(21),  30  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio2",
+        {
+            {   "PI0",  SUNXI_GPI(0),   9   },
+            {   "PI1",  SUNXI_GPI(1),   11  },
+            {   "PI2",  SUNXI_GPI(2),   13  },
+            {   "PI3",  SUNXI_GPI(3),   15  },
+            {   "PI4",  SUNXI_GPI(4),   17  },
+            {   "PI5",  SUNXI_GPI(5),   19  },
+            {   "PI6",  SUNXI_GPI(6),   21  },
+            {   "PI7",  SUNXI_GPI(7),   23  },
+            {   "PI8",  SUNXI_GPI(8),   25  },
+            {   "PI9",  SUNXI_GPI(9),   27  },
+            {   "PI10", SUNXI_GPI(10),  29  },
+            {   "PI11", SUNXI_GPI(11),  31  },
+            {   "PI12", SUNXI_GPI(12),  33  },
+            {   "PI13", SUNXI_GPI(13),  35  },
+            {   "PI14", SUNXI_GPI(14),  37  },
+            {   "PI15", SUNXI_GPI(15),  39  },
+            {   "PI16", SUNXI_GPI(16),  40  },
+            {   "PI17", SUNXI_GPI(17),  38  },
+            {   "PI18", SUNXI_GPI(18),  36  },
+            {   "PI19", SUNXI_GPI(19),  34  },
+            {   "PI20", SUNXI_GPI(20),  32  },
+            {   "PI21", SUNXI_GPI(21),  30  },
+            {   "PE0",  SUNXI_GPE(0),   6   },
+            {   "PE1",  SUNXI_GPE(1),   8   },
+            {   "PE2",  SUNXI_GPE(2),   10  },
+            {   "PE3",  SUNXI_GPE(3),   12  },
+            {   "PE4",  SUNXI_GPE(4),   14  },
+            {   "PE5",  SUNXI_GPE(5),   16  },
+            {   "PE6",  SUNXI_GPE(6),   18  },
+            {   "PE7",  SUNXI_GPE(7),   20  },
+            {   "PE8",  SUNXI_GPE(8),   22  },
+            {   "PE9",  SUNXI_GPE(9),   24  },
+            {   "PE10", SUNXI_GPE(10),  26  },
+            {   "PE11", SUNXI_GPE(11),  28  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio3",
+        {
+            {   "PH0",  SUNXI_GPH(0),   7   },
+            {   "PH7",  SUNXI_GPH(7),   9   },
+            {   "PH9",  SUNXI_GPH(9),   11  },
+            {   "PH10", SUNXI_GPH(10),  13  },
+            {   "PH11", SUNXI_GPH(11),  15  },
+            {   "PH12", SUNXI_GPH(12),  17  },
+            {   "PH13", SUNXI_GPH(13),  19  },
+            {   "PH14", SUNXI_GPH(14),  21  },
+            {   "PH15", SUNXI_GPH(15),  23  },
+            {   "PH16", SUNXI_GPH(16),  25  },
+            {   "PH17", SUNXI_GPH(17),  27  },
+            {   "PH18", SUNXI_GPH(18),  29  },
+            {   "PH19", SUNXI_GPH(19),  31  },
+            {   "PH20", SUNXI_GPH(20),  33  },
+            {   "PH21", SUNXI_GPH(21),  35  },
+            {   "PH22", SUNXI_GPH(22),  37  },
+            {   "PH23", SUNXI_GPH(23),  39  },
+            {   "PH24", SUNXI_GPH(24),  34  },
+            {   "PH25", SUNXI_GPH(25),  36  },
+            {   "PH26", SUNXI_GPH(26),  38  },
+            {   "PH27", SUNXI_GPH(27),  40  },
+            {   "PB3",  SUNXI_GPB(3),   4   },
+            {   "PB4",  SUNXI_GPB(4),   6   },
+            {   "PB5",  SUNXI_GPB(5),   8  },
+            {   "PB6",  SUNXI_GPB(6),   10  },
+            {   "PB7",  SUNXI_GPB(7),   12  },
+            {   "PB8",  SUNXI_GPB(8),   14  },
+            {   "PB9",  SUNXI_GPB(8),   16  },
+            {   "PB10", SUNXI_GPB(10),  18  },
+            {   "PB11", SUNXI_GPB(11),  20  },
+            {   "PB12", SUNXI_GPB(12),  22  },
+            {   "PB13", SUNXI_GPB(13),  24  },
+            {   "PB14", SUNXI_GPB(14),  26  },
+            {   "PB15", SUNXI_GPB(15),  28  },
+            {   "PB16", SUNXI_GPB(16),  30  },
+            {   "PB17", SUNXI_GPB(17),  32  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio4",
+        {
+            {   "PA9",  SUNXI_GPA(9),   12  },
+            {   "PA14", SUNXI_GPA(14),  14  },
+            {   "PC7",  SUNXI_GPC(7),   16  },
+            {   "PC16", SUNXI_GPC(16),  18  },
+            {   "PC17", SUNXI_GPC(17),  20  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"led",
+        {
+            {   "PH2",  SUNXI_GPH(2),   1},
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+};
+
+#endif

recipes-devtools/python/files/olinuxino-a20som/mapping.h

@@ -0,0 +1,265 @@
+/*
+ *
+ * This file is part of pyA20SOM.
+ * mapping.h is python GPIO extension.
+ *
+ * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
+ *
+ * pyA20SOM is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MAPPING_H
+#define __MAPPING_H
+
+#include "gpio_lib.h"
+
+/**
+Structure that describe all gpio
+*/
+typedef struct _pin {
+    char name[10];          // The processor pin
+    int offset;             // Memory offset for the pin
+    int pin_number;         // Number on the connector
+}pin_t;
+
+typedef struct _gpio {
+    char connector_name[10];
+    pin_t pins[41];
+}gpio_t;
+
+
+gpio_t gpio[] = {
+    {"lcd",
+        {
+            {   "PD16", SUNXI_GPD(16),  5   },
+            {   "PD17", SUNXI_GPD(17),  6   },
+            {   "PD18", SUNXI_GPD(18),  7   },
+            {   "PD19", SUNXI_GPD(19),  8   },
+            {   "PD20", SUNXI_GPD(20),  9   },
+            {   "PD21", SUNXI_GPD(21),  10  },
+            {   "PD22", SUNXI_GPD(22),  11  },
+            {   "PD23", SUNXI_GPD(23),  12  },
+            {   "PD8", SUNXI_GPD(8),    13  },
+            {   "PD9", SUNXI_GPD(9),    14  },
+            {   "PD10", SUNXI_GPD(10),  15  },
+            {   "PD11", SUNXI_GPD(11),  16  },
+            {   "PD12", SUNXI_GPD(12),  17  },
+            {   "PD13", SUNXI_GPD(13),  18  },
+            {   "PD14", SUNXI_GPD(14),  19  },
+            {   "PD15", SUNXI_GPD(15),  20  },
+            {   "PD0",  SUNXI_GPD(0),   21  },
+            {   "PD1",  SUNXI_GPD(1),   22  },
+            {   "PD2",  SUNXI_GPD(2),   23  },
+            {   "PD3",  SUNXI_GPD(3),   24  },
+            {   "PD4",  SUNXI_GPD(4),   25  },
+            {   "PD5",  SUNXI_GPD(5),   26  },
+            {   "PD6",  SUNXI_GPD(6),   27  },
+            {   "PD7",  SUNXI_GPD(7),   28  },
+            {   "PD26", SUNXI_GPD(26),  29  },
+            {   "PD27", SUNXI_GPD(27),  30  },
+            {   "PD24", SUNXI_GPD(24),  31  },
+            {   "PD25", SUNXI_GPD(25),  32  },
+            {   "PH7",  SUNXI_GPH(7),   35  },
+            {   "PB2",  SUNXI_GPB(2),   36  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+    {"gpio1",
+        {
+            {   "PB9",  SUNXI_GPB(9),   7   },
+            {   "PH5",  SUNXI_GPH(5),   9   },
+            {   "PH4",  SUNXI_GPH(4),   11  },
+            {   "PH6",  SUNXI_GPH(6),   13  },
+            {   "PH3",  SUNXI_GPH(3),   15  },
+            {   "PI0",  SUNXI_GPI(0),   29  },
+            {   "PI1",  SUNXI_GPI(1),   31  },
+            {   "PI2",  SUNXI_GPI(2),   33  },
+            {   "PI3",  SUNXI_GPI(3),   35  },
+            {   "PI10", SUNXI_GPI(10),  37  },
+            {   "PI11", SUNXI_GPI(11),  39  },
+            {   "PI14", SUNXI_GPI(14),  40  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+    {"gpio2",
+        {
+            {   "PB22", SUNXI_GPB(22),  21  },
+            {   "PB23", SUNXI_GPB(23),  22  },
+            {   "PA0",  SUNXI_GPA(0),   29  },
+            {   "PA1",  SUNXI_GPA(1),   27  },
+            {   "PA2",  SUNXI_GPA(2),   25  },
+            {   "PA3",  SUNXI_GPA(3),   23  },
+            {   "PA4",  SUNXI_GPA(4),   30  },
+            {   "PA5",  SUNXI_GPA(5),   28  },
+            {   "PA6",  SUNXI_GPA(6),   26  },
+            {   "PA7",  SUNXI_GPA(7),   24  },
+            {   "PA8",  SUNXI_GPA(8),   33  },
+            {   "PA9",  SUNXI_GPA(9),   35  },
+            {   "PA10", SUNXI_GPA(10),  31  },
+            {   "PA11", SUNXI_GPA(11),  37  },
+            {   "PA12", SUNXI_GPA(12),  39  },
+            {   "PA13", SUNXI_GPA(13),  32  },
+            {   "PA14", SUNXI_GPA(14),  34  },
+            {   "PA15", SUNXI_GPA(15),  36  },
+            {   "PA16", SUNXI_GPA(16),  38  },
+            {   "PA17", SUNXI_GPA(17),  40  },
+
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio3",
+        {
+            {   "PH0",  SUNXI_GPH(0),   5   },
+            {   "PH2",  SUNXI_GPH(2),   7   },
+            {   "PH8",  SUNXI_GPH(8),   9   },
+            {   "PH9",  SUNXI_GPH(9),   11  },
+            {   "PH10", SUNXI_GPH(10),  13  },
+            {   "PH11", SUNXI_GPH(11),  15  },
+            {   "PH12", SUNXI_GPH(12),  17  },
+            {   "PH13", SUNXI_GPH(13),  19  },
+            {   "PH14", SUNXI_GPH(14),  21  },
+            {   "PH15", SUNXI_GPH(15),  23  },
+            {   "PH16", SUNXI_GPH(16),  25  },
+            {   "PH17", SUNXI_GPH(17),  27  },
+            {   "PH18", SUNXI_GPH(18),  29  },
+            {   "PH19", SUNXI_GPH(19),  31  },
+            {   "PH20", SUNXI_GPH(20),  33  },
+            {   "PH21", SUNXI_GPH(21),  35  },
+            {   "PH22", SUNXI_GPH(22),  37  },
+            {   "PH23", SUNXI_GPH(23),  39  },
+
+            {   "PB3",  SUNXI_GPB(3),   6   },
+            {   "PB4",  SUNXI_GPB(4),   8   },
+            {   "PB5",  SUNXI_GPB(5),   10  },
+            {   "PB6",  SUNXI_GPB(6),   12  },
+            {   "PB7",  SUNXI_GPB(7),   14  },
+            {   "PB8",  SUNXI_GPB(8),   16  },
+            {   "PB10",  SUNXI_GPB(10), 18  },
+            {   "PB11",  SUNXI_GPB(11), 20  },
+            {   "PB12",  SUNXI_GPB(12), 22  },
+            {   "PB13",  SUNXI_GPB(13), 24  },
+            {   "PB14",  SUNXI_GPB(14), 26  },
+            {   "PB15",  SUNXI_GPB(15), 28  },
+            {   "PB16",  SUNXI_GPB(16), 30  },
+            {   "PB17",  SUNXI_GPB(17), 32  },
+            {   "PH24",  SUNXI_GPH(24), 34  },
+            {   "PH25",  SUNXI_GPH(25), 36  },
+            {   "PH26",  SUNXI_GPH(26), 38  },
+            {   "PH27",  SUNXI_GPH(27), 40  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio4",
+        {
+            {   "PB0",  SUNXI_GPB(0),   5   },
+            {   "PB1",  SUNXI_GPB(1),   7   },
+            {   "PE0",  SUNXI_GPE(0),   6   },
+            {   "PE1",  SUNXI_GPE(1),   8   },
+            {   "PE2",  SUNXI_GPE(2),   10  },
+            {   "PE3",  SUNXI_GPE(3),   12  },
+            {   "PE4",  SUNXI_GPE(4),   14  },
+            {   "PE5",  SUNXI_GPE(5),   16  },
+            {   "PE6",  SUNXI_GPE(0),   18  },
+            {   "PE7",  SUNXI_GPE(0),   9   },
+            {   "PE8",  SUNXI_GPE(0),   11  },
+            {   "PE9",  SUNXI_GPE(0),   13  },
+            {   "PE10", SUNXI_GPE(0),   15  },
+            {   "PE11", SUNXI_GPE(0),   17  },
+            {   "PI20", SUNXI_GPI(20),  19  },
+            {   "PI21", SUNXI_GPI(21),  20  },
+            {   "PB18",  SUNXI_GPB(18), 21  },
+            {   "PB19",  SUNXI_GPB(19), 22  },
+            {   "PI16",  SUNXI_GPI(16), 23  },
+            {   "PI17",  SUNXI_GPI(17), 24  },
+            {   "PI18",  SUNXI_GPI(18), 25  },
+            {   "PI19",  SUNXI_GPI(19), 26  },
+            {   "PI12",  SUNXI_GPI(12), 27  },
+            {   "PI13",  SUNXI_GPI(13), 28  },
+            {   "PB20",  SUNXI_GPB(20), 29  },
+            {   "PB21",  SUNXI_GPB(21), 30  },
+            {   "PC22",  SUNXI_GPC(22), 31  },
+            {   "PC21",  SUNXI_GPC(21), 32  },
+            {   "PC20",  SUNXI_GPC(20), 33  },
+            {   "PC19",  SUNXI_GPC(21), 34  },
+            {   "PI15",  SUNXI_GPI(15), 36  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio5",
+        {
+            {   "PG0",  SUNXI_GPG(0),   1   },
+            {   "PG1",  SUNXI_GPG(1),   3   },
+            {   "PG2",  SUNXI_GPG(2),   5   },
+            {   "PG3",  SUNXI_GPG(3),   7   },
+            {   "PG4",  SUNXI_GPG(4),   9   },
+            {   "PG5",  SUNXI_GPG(5),   11  },
+            {   "PG6",  SUNXI_GPG(6),   13  },
+            {   "PG7",  SUNXI_GPG(7),   15  },
+            {   "PG8",  SUNXI_GPG(8),   17  },
+            {   "PG9",  SUNXI_GPG(9),   19  },
+            {   "PG10", SUNXI_GPG(10),  21  },
+            {   "PG11", SUNXI_GPG(11),  23  },
+            {   "PC8",  SUNXI_GPC(8),   25  },
+            {   "PC9",  SUNXI_GPC(9),   27  },
+            {   "PC10", SUNXI_GPC(10),  29  },
+            {   "PC11", SUNXI_GPC(11),  31  },
+            {   "PC12", SUNXI_GPC(12),  33  },
+            {   "PC13", SUNXI_GPC(13),  35  },
+            {   "PC14", SUNXI_GPC(14),  37  },
+            {   "PC15", SUNXI_GPC(15),  39  },
+            {   "PI6",  SUNXI_GPI(6),   4   },
+            {   "PI7",  SUNXI_GPI(7),   6   },
+            {   "PI8",  SUNXI_GPI(8),   8   },
+            {   "PI9",  SUNXI_GPI(9),   10  },
+            {   "PI4",  SUNXI_GPI(4),   12  },
+            {   "PI5",  SUNXI_GPI(5),   14  },
+            {   "PC16", SUNXI_GPC(16),  16  },
+            {   "PC17", SUNXI_GPC(17),  18  },
+            {   "PC18", SUNXI_GPC(18),  20  },
+            {   "PC23", SUNXI_GPC(23),  22  },
+            {   "PC24", SUNXI_GPC(24),  24  },
+            {   "PC7",  SUNXI_GPC(7),   26  },
+            {   "PC6",  SUNXI_GPC(6),   28  },
+            {   "PC5",  SUNXI_GPC(5),   30  },
+            {   "PC3",  SUNXI_GPC(3),   32  },
+            {   "PC2",  SUNXI_GPC(2),   34  },
+            {   "PC1",  SUNXI_GPC(1),   36  },
+            {   "PC0",  SUNXI_GPC(0),   38  },
+            {   "PC4",  SUNXI_GPC(4),   40  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+};
+
+
+
+#endif

recipes-devtools/python/files/setup.py.patch

@@ -0,0 +1,51 @@
+--- pyA20-0.2.1/setup.py	2014-09-04 12:17:18.000000000 +0200
++++ pyA20-0.2.1/setup.py	2014-11-24 17:44:37.000000000 +0100
+@@ -43,31 +43,31 @@
+     Detect processor type
+     :return:
+     """
+-    cpuinfo = open("/proc/cpuinfo", 'r')
+-    for line in cpuinfo:
+-        if "Hardware" in line:
+-            processor = line.split(":")[1].rstrip()
++    #cpuinfo = open("/proc/cpuinfo", 'r')
++    #for line in cpuinfo:
++    #    if "Hardware" in line:
++    #        processor = line.split(":")[1].rstrip()
+ 
+-            if "sun4i" in processor:
+-                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A10)")
++    #        if "sun4i" in processor:
++    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A10)")
+ 
+-            elif "sun5i" in processor:
+-                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A13)")
++    #        elif "sun5i" in processor:
++    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A13)")
+ 
+-            elif "sun7i" in processor:
+-                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A20)")
++    #        elif "sun7i" in processor:
++    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A20)")
+ 
+-            else:
+-                print ("Detected processor: " + print_color("unknown"))
++    #        else:
++    #            print ("Detected processor: " + print_color("unknown"))
+ 
+ 
+-            if processor_type not in processor:
+-                print_warning()
++    #        if processor_type not in processor:
++    #            print_warning()
+ 
+-            return
++    return
+ 
+-    print ("No processor detected")
+-    print_warning()
++    #print ("No processor detected")
++    #print_warning()
+ 
+ 
+ class build_ext(_build_ext):

recipes-devtools/python/pya20_0.2.1.bb

@@ -0,0 +1,24 @@
+DESCRIPTION = "A module to control Allwinner GPIO,SPI and I2C channels"
+HOMEPAGE = "https://pypi.python.org/pypi/pyA20"
+SECTION = "devel/python"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://PKG-INFO;md5=bfe0261ded6cff75086193ec2f79129e"
+DEPENDS = "python"
+
+# No GPIO mappings for other machines yet
+COMPATIBLE_MACHINE = "(olinuxino-a13|olinuxino-a10|olinuxino-a20|olinuxino-a10lime|olinuxino-a20lime|olinuxino-a20lime2|olinuxino-a13som|olinuxino-a20som)"
+
+SRC_URI = "http://pypi.python.org/packages/source/p/pyA20/pyA20-${PV}.tar.gz \
+           file://setup.py.patch \
+           file://mapping.h \
+          "
+S = "${WORKDIR}/pyA20-${PV}"
+
+inherit distutils
+
+do_compile_prepend() { 
+cp ${WORKDIR}/mapping.h ${S}/pyA20/gpio/mapping.h
+}
+
+SRC_URI[md5sum] = "2290066bbe274000c53693959a8005b4"
+SRC_URI[sha256sum] = "b15e4ee1016b7eb52001cbccde3751868624a88d2adbb9adc5404628f7e59e7e"

recipes-devtools/python/pya20som_0.2.1.bb

@@ -0,0 +1,24 @@
+DESCRIPTION = "A module to control Allwinner GPIO,SPI and I2C channels"
+HOMEPAGE = "https://pypi.python.org/pypi/pyA20SOM"
+SECTION = "devel/python"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://PKG-INFO;md5=cf6345f2cb2acee98b01c493d68b8322"
+DEPENDS = "python"
+
+# No GPIO mappings for other machines yet
+COMPATIBLE_MACHINE = "olinuxino-a20som"
+
+SRC_URI = "http://pypi.python.org/packages/source/p/pyA20SOM/pyA20SOM-${PV}.tar.gz \
+           file://setup.py.patch \
+           file://mapping.h \
+          "
+S = "${WORKDIR}/pyA20SOM-${PV}"
+
+inherit distutils
+
+do_compile_prepend() { 
+cp ${WORKDIR}/mapping.h ${S}/pyA20SOM/gpio/mapping.h
+}
+
+SRC_URI[md5sum] = "a720115ef1d3dffe82f42f2157ca1c56"
+SRC_URI[sha256sum] = "1ac1025596cc112964f7caac9a6a523d5da61623c248ccc178c6cbb4bc1b4549"

recipes-graphics/libgles/sunxi-mali/0001-Add-EGLSyncKHR-EGLTimeKHR-and-GLChar-definition.patch

@@ -0,0 +1,47 @@
+From fcdde5440976bb2c204789e13313c4d77cb263b7 Mon Sep 17 00:00:00 2001
+From: Nicolas Aguirre <aguirre.nicolas@gmail.com>
+Date: Tue, 16 Jun 2015 23:06:29 +0200
+Subject: [PATCH] Add EGLSyncKHR EGLTimeKHR and GLChar definition
+
+---
+ include/EGL/eglext.h | 4 +++-
+ include/GLES2/gl2.h  | 1 +
+ 2 files changed, 4 insertions(+), 1 deletion(-)
+
+diff --git a/include/EGL/eglext.h b/include/EGL/eglext.h
+index 25cfcb8..ec482d8 100644
+--- a/include/EGL/eglext.h
++++ b/include/EGL/eglext.h
+@@ -36,7 +36,6 @@ extern "C" {
+ /* Current version at http://www.khronos.org/registry/egl/ */
+ /* $Revision: 7244 $ on $Date: 2009-01-20 17:06:59 -0800 (Tue, 20 Jan 2009) $ */
+ #define EGL_EGLEXT_VERSION 3
+-
+ #ifndef EGL_KHR_config_attribs
+ #define EGL_KHR_config_attribs 1
+ #define EGL_CONFORMANT_KHR			0x3042	/* EGLConfig attribute */
+@@ -44,6 +43,9 @@ extern "C" {
+ #define EGL_VG_ALPHA_FORMAT_PRE_BIT_KHR		0x0040	/* EGL_SURFACE_TYPE bitfield */
+ #endif
+ 
++typedef void *EGLSyncKHR;
++typedef uint64_t EGLTimeKHR;
++
+ #ifndef EGL_KHR_lock_surface
+ #define EGL_KHR_lock_surface 1
+ #define EGL_READ_SURFACE_BIT_KHR		0x0001	/* EGL_LOCK_USAGE_HINT_KHR bitfield */
+diff --git a/include/GLES2/gl2.h b/include/GLES2/gl2.h
+index 59e376c..90d96bb 100644
+--- a/include/GLES2/gl2.h
++++ b/include/GLES2/gl2.h
+@@ -32,6 +32,7 @@ typedef unsigned int     GLuint;
+ typedef khronos_float_t  GLfloat;
+ typedef khronos_float_t  GLclampf;
+ typedef khronos_int32_t  GLfixed;
++typedef char             GLchar;
+ 
+ /* GL types for handling large vertex buffer objects */
+ typedef khronos_intptr_t GLintptr;
+-- 
+1.9.1
+

recipes-graphics/libgles/sunxi-mali/0001-fix-test-build.patch

@@ -0,0 +1,28 @@
+From 054886253f4f559b351a94e1e6ebfd5eb504461f Mon Sep 17 00:00:00 2001
+From: Trevor Woerner <twoerner@gmail.com>
+Date: Thu, 24 Sep 2015 23:38:11 -0400
+Subject: [PATCH] fix test build
+
+Allow the test application to build and link successfully.
+
+Signed-off-by: Trevor Woerner <twoerner@gmail.com>
+---
+ test/Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/test/Makefile b/test/Makefile
+index 700416e..51481c9 100644
+--- a/test/Makefile
++++ b/test/Makefile
+@@ -5,7 +5,7 @@ CFLAGS ?= -Wall
+ all: test
+ 
+ test: ../config.mk test.c
+-	$(CC) $(CFLAGS) -o $@ test.c -lEGL -lGLESv2
++	$(CC) $(CFLAGS) -I../include -L../../image/usr/lib -o $@ test.c -lEGL -lGLESv2 -lX11
+ 
+ clean:
+ 	rm -f test
+-- 
+2.6.0.rc3
+

recipes-graphics/libgles/sunxi-mali/0002-Add-missing-GLchar-definition.patch

@@ -0,0 +1,136 @@
+From 15d91ef25234ff402f4288273989693f2d402d9d Mon Sep 17 00:00:00 2001
+From: Raoul Hecky <raoul.hecky@gmail.com>
+Date: Fri, 10 Jan 2014 14:44:53 +0100
+Subject: [PATCH] Add missing GLchar definition, some gl/gles apps needs that
+ to compile correctly
+
+Build pkg-config files for gles and egl and install them
+
+Fix .pc creation
+
+add correct driver version in .pc
+---
+ .gitignore          |  1 +
+ Makefile            |  1 +
+ Makefile.pc         | 21 +++++++++++++++++++++
+ egl.pc.in           | 11 +++++++++++
+ gles_cm.pc.in       | 11 +++++++++++
+ glesv2.pc.in        | 11 +++++++++++
+ include/GLES/gl.h   |  1 +
+ include/GLES2/gl2.h |  1 +
+ 8 files changed, 58 insertions(+)
+ create mode 100644 Makefile.pc
+ create mode 100644 egl.pc.in
+ create mode 100644 gles_cm.pc.in
+ create mode 100644 glesv2.pc.in
+
+diff --git a/.gitignore b/.gitignore
+index 6865abf..e8a3713 100644
+--- a/.gitignore
++++ b/.gitignore
+@@ -1,2 +1,3 @@
+ config.mk
+ *~
++*.pc
+diff --git a/Makefile b/Makefile
+index 60d4a0f..94845ea 100644
+--- a/Makefile
++++ b/Makefile
+@@ -21,6 +21,7 @@ clean:
+ install: config.mk
+ 	$(MAKE) -C lib install
+ 	$(MAKE) -C include install
++	$(MAKE) -f Makefile.pc
+ 
+ test: config.mk
+ 	$(MAKE) -C test test
+diff --git a/Makefile.pc b/Makefile.pc
+new file mode 100644
+index 0000000..01097fd
+--- /dev/null
++++ b/Makefile.pc
+@@ -0,0 +1,21 @@
++include Makefile.setup
++include config.mk
++
++all:
++	echo "prefix=$(prefix)" > egl.pc
++	cat egl.pc.in >> egl.pc
++	sed -i "s/MVERSION/$MALI_VERSION/g" egl.pc
++	echo "prefix=$(prefix)" > gles_cm.pc
++	cat gles_cm.pc.in >> gles_cm.pc
++	sed -i "s/MVERSION/$MALI_VERSION/g" gles_cm.pc
++	echo "prefix=$(prefix)" > glesv2.pc
++	cat glesv2.pc.in >> glesv2.pc
++	sed -i "s/MVERSION/$MALI_VERSION/g" glesv2.pc
++
++install: egl.pc gles_cm.pc glesv2.pc
++	$(MKDIR) $(libdir)/pkgconfig
++	$(INSTALL_DATA) $^ $(libdir)/pkgconfig
++
++clean:
++	$(RM) egl.pc gles_cm.pc glesv2.pc
++
+diff --git a/egl.pc.in b/egl.pc.in
+new file mode 100644
+index 0000000..0697183
+--- /dev/null
++++ b/egl.pc.in
+@@ -0,0 +1,11 @@
++exec_prefix=${prefix}
++libdir=${prefix}/lib
++includedir=${prefix}/include
++
++Name: egl
++Description: Mali EGL library
++Requires.private:
++Version: MVERSION
++Libs: -L${libdir} -lEGL
++Libs.private: -lm -lpthread -ldl
++Cflags: -I${includedir}
+diff --git a/gles_cm.pc.in b/gles_cm.pc.in
+new file mode 100644
+index 0000000..22bc348
+--- /dev/null
++++ b/gles_cm.pc.in
+@@ -0,0 +1,11 @@
++exec_prefix=${prefix}
++libdir=${prefix}/lib
++includedir=${prefix}/include
++
++Name: gles_cm
++Description: Mali OpenGL ES 1.1 CM library
++Requires.private:
++Version: MVERSION
++Libs: -L${libdir} -lGLES_CM
++Libs.private: -lm -lpthread -ldl
++Cflags: -I${includedir}
+diff --git a/glesv2.pc.in b/glesv2.pc.in
+new file mode 100644
+index 0000000..efef2ed
+--- /dev/null
++++ b/glesv2.pc.in
+@@ -0,0 +1,11 @@
++exec_prefix=${prefix}
++libdir=${prefix}/lib
++includedir=${prefix}/include
++
++Name: glesv2
++Description: Mali OpenGL ES 2.0 library
++Requires.private:
++Version: MVERSION
++Libs: -L${libdir} -lGLESv2
++Libs.private: -lm -lpthread -ldl
++Cflags: -I${includedir}
+diff --git a/include/GLES/gl.h b/include/GLES/gl.h
+index 858f394..a6bb591 100644
+--- a/include/GLES/gl.h
++++ b/include/GLES/gl.h
+@@ -29,6 +29,7 @@ typedef float  GLfloat;
+ typedef float  GLclampf;
+ typedef signed int  GLfixed;
+ typedef signed int  GLclampx;
++typedef char GLchar;
+ 
+ typedef int * GLintptr;
+ typedef int *  GLsizeiptr;

recipes-graphics/libgles/sunxi-mali/0003-Fix-sed-to-replace-by-the-correct-var.patch

@@ -0,0 +1,30 @@
+From 95bbd40135f96b473d4c713317e485d0049580cd Mon Sep 17 00:00:00 2001
+From: Raoul Hecky <raoul.hecky@gmail.com>
+Date: Tue, 8 Apr 2014 08:10:12 +0200
+Subject: [PATCH] Fix sed to replace by the correct var
+
+---
+ Makefile.pc | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/Makefile.pc b/Makefile.pc
+index 01097fd..c51d18c 100644
+--- a/Makefile.pc
++++ b/Makefile.pc
+@@ -4,13 +4,13 @@ include config.mk
+ all:
+ 	echo "prefix=$(prefix)" > egl.pc
+ 	cat egl.pc.in >> egl.pc
+-	sed -i "s/MVERSION/$MALI_VERSION/g" egl.pc
++	sed -i "s/MVERSION/${MALI_VERSION}/g" egl.pc
+ 	echo "prefix=$(prefix)" > gles_cm.pc
+ 	cat gles_cm.pc.in >> gles_cm.pc
+-	sed -i "s/MVERSION/$MALI_VERSION/g" gles_cm.pc
++	sed -i "s/MVERSION/${MALI_VERSION}/g" gles_cm.pc
+ 	echo "prefix=$(prefix)" > glesv2.pc
+ 	cat glesv2.pc.in >> glesv2.pc
+-	sed -i "s/MVERSION/$MALI_VERSION/g" glesv2.pc
++	sed -i "s/MVERSION/${MALI_VERSION}/g" glesv2.pc
+ 
+ install: egl.pc gles_cm.pc glesv2.pc
+ 	$(MKDIR) $(libdir)/pkgconfig

recipes-graphics/libgles/sunxi-mali_git.bb

@@ -0,0 +1,86 @@
+DESCRIPTION = "libGLES for the A10/A13 Allwinner processor with Mali 400 (X11)"
+
+LICENSE = "Proprietary"
+LIC_FILES_CHKSUM = "file://README;md5=1b81a178e80ee888ee4571772699ab2c"
+
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
+
+# These libraries shouldn't get installed in world builds unless something
+# explicitly depends upon them.
+EXCLUDE_FROM_WORLD = "1"
+PROVIDES = "virtual/libgles1 virtual/libgles2 virtual/egl"
+RPROVIDES_${PN} += "libGLESv2.so libEGL.so libGLESv2.so libGLESv1_CM.so libMali.so"
+
+SRCREV_pn-${PN} = "d343311efc8db166d8371b28494f0f27b6a58724"
+SRC_URI = "gitsm://github.com/linux-sunxi/sunxi-mali.git \
+           file://0001-Add-EGLSyncKHR-EGLTimeKHR-and-GLChar-definition.patch \
+           file://0002-Add-missing-GLchar-definition.patch \
+           file://0003-Fix-sed-to-replace-by-the-correct-var.patch \
+           file://0001-fix-test-build.patch \
+           "
+
+S = "${WORKDIR}/git"
+
+DEPENDS = "libdrm dri2proto libump"
+
+PACKAGECONFIG ??= "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11', '', d)} ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland', '', d)}"
+PACKAGECONFIG[wayland] = "EGL_TYPE=framebuffer,,,"
+PACKAGECONFIG[x11] = "EGL_TYPE=x11,,virtual/libx11 libxau libxdmcp libdri2,"
+
+# Inhibit warnings about files being stripped, we can't do anything about it.
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
+INHIBIT_PACKAGE_STRIP = "1"
+INHIBIT_SYSROOT_STRIP = "1"
+
+do_configure() {
+         DESTDIR=${D}/ VERSION=r3p0 ABI=armhf make ${EXTRA_OEMAKE} config
+}
+
+do_install() {
+    make -f Makefile.pc
+
+    # install headers
+    install -d -m 0755 ${D}${includedir}/EGL
+    install -m 0755 ${S}/include/EGL/*.h ${D}${includedir}/EGL/
+    install -d -m 0755 ${D}${includedir}/GLES
+    install -m 0755 ${S}/include/GLES/*.h ${D}${includedir}/GLES/
+    install -d -m 0755 ${D}${includedir}/GLES2
+    install -m 0755 ${S}/include/GLES2/*.h ${D}${includedir}/GLES2/
+    install -d -m 0755 ${D}${includedir}/KHR
+    install -m 0755 ${S}/include/KHR/*.h ${D}${includedir}/KHR/
+
+    # Copy the .pc files
+    install -d -m 0755 ${D}${libdir}/pkgconfig
+    install -m 0644 ${S}/egl.pc ${D}${libdir}/pkgconfig/
+    install -m 0644 ${S}/gles_cm.pc ${D}${libdir}/pkgconfig/
+    install -m 0644 ${S}/glesv2.pc ${D}${libdir}/pkgconfig/
+
+    install -d ${D}${libdir}
+    install -d ${D}${includedir}
+
+    make libdir=${D}${libdir}/ includedir=${D}${includedir}/ install
+    make libdir=${D}${libdir}/ includedir=${D}${includedir}/ install -C include
+
+    # Fix .so name and create symlinks, binary package provides .so wich can't be included directly in package without triggering the 'dev-so' QA check
+    # Packages like xf86-video-fbturbo dlopen() libUMP.so, so we do need to ship the .so files in ${PN}
+
+    mv ${D}${libdir}/libMali.so ${D}${libdir}/libMali.so.3
+    ln -sf libMali.so.3 ${D}${libdir}/libMali.so
+
+    for flib in libEGL.so.1.4 libGLESv1_CM.so.1.1 libGLESv2.so.2.0 ; do
+        rm ${D}${libdir}/$flib
+        ln -sf libMali.so.3 ${D}${libdir}/$flib
+    done
+
+    DESTDIR=${D}/ VERSION=r3p0 ABI=armhf make ${EXTRA_OEMAKE} test
+    install -d ${D}${bindir}
+    install -m 0755 ${S}/test/test ${D}${bindir}/sunximali-test
+}
+
+# Packages like xf86-video-fbturbo dlopen() libUMP.so, so we do need to ship the .so files in ${PN}
+PACKAGES =+ "${PN}-test"
+FILES_${PN} += "${libdir}/lib*.so"
+FILES_${PN}-dev = "${includedir} ${libdir}/pkgconfig/*"
+FILES_${PN}-test = "${bindir}/sunximali-test"
+# These are closed binaries generated elsewhere so don't check ldflags & text relocations
+INSANE_SKIP_${PN} = "dev-so ldflags textrel"

recipes-graphics/libump/libump_git.bb

@@ -0,0 +1,15 @@
+DESCRIPTION = "Unified Memory Provider userspace API source code needed for xf86-video-mali compilation"
+
+LICENSE = "Apache-2"
+LIC_FILES_CHKSUM = "file://debian/copyright;md5=edf7fb6071cae7ec80d537a05ee17198"
+
+inherit autotools
+
+PV = "r4p0-00rel0+git${SRCPV}"
+SRCREV_pn-${PN} = "ec0680628744f30b8fac35e41a7bd8e23e59c39f"
+
+SRC_URI = "git://github.com/linux-sunxi/libump.git"
+
+S = "${WORKDIR}/git"
+
+

recipes-graphics/tslib/tslib_1.1.bbappend

@@ -0,0 +1,4 @@
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+
+SRC_URI += "file://tslib.patch"
+

recipes-graphics/tslib/tslib_git.bbappend

@@ -1,7 +0,0 @@
-FILESEXTRAPATHS := "${THISDIR}/${PN}"
-
-PRINC := "${@int(PRINC) + 1}"
-
-SRC_URI += "file://0001-Support-reading-coordinates-from-multitouch-devices.patch \ 
-            file://tslib.patch"
-

recipes-graphics/xorg-xserver/libdri2_git.bb

@@ -0,0 +1,17 @@
+DESCRIPTION = "Library for the DRI2 extension to the X Window System"
+
+LICENSE = "MIT-X"
+LIC_FILES_CHKSUM = "file://COPYING;md5=827da9afab1f727f2a66574629e0f39c"
+
+DEPENDS = "libdrm libxext xextproto libxfixes dri2proto"
+
+PE = "1"
+PV = "1.0.0+git${SRCPV}"
+SRC_URI = "git://github.com/robclark/libdri2.git;protocol=http;branch=master"
+
+SRCREV_pn-${PN} = "4f1eef3183df2b270c3d5cbef07343ee5127a6a4"
+
+S = "${WORKDIR}/git"
+
+inherit autotools pkgconfig
+

recipes-graphics/xorg-xserver/xf86-video-fbturbo/20-fbturbo.conf

@@ -0,0 +1,7 @@
+Section "Device"
+        Identifier      "Allwinner A10/A13 FBDEV"
+        Driver          "fbturbo"
+        Option          "fbdev" "/dev/fb0"
+
+        Option          "SwapbuffersWait" "false"
+EndSection

recipes-graphics/xorg-xserver/xf86-video-fbturbo_git.bb

@@ -0,0 +1,26 @@
+require recipes-graphics/xorg-driver/xorg-driver-video.inc
+
+DESCRIPTION = "X.Org X server -- A10/A13 display driver"
+
+LICENSE = "MIT-X"
+LIC_FILES_CHKSUM = "file://COPYING;md5=f91dc3ee5ce59eb4b528e67e98a31266"
+
+DEPENDS += "sunxi-mali libump xf86driproto"
+
+PE = "3"
+PV = "0.5.1+git${SRCPV}"
+SRCREV_pn-${PN} = "e094e3c8f9004ca3347694bd05b99d136e8621b9"
+
+SRC_URI = "git://github.com/ssvb/xf86-video-fbturbo.git;protocol=http;branch=master \
+           file://20-fbturbo.conf"
+
+S = "${WORKDIR}/git"
+
+CFLAGS += " -I${STAGING_INCDIR}/xorg "
+
+do_install_append() {
+    install -d ${D}${datadir}/X11/xorg.conf.d
+    install -m 0644 ${WORKDIR}/20-fbturbo.conf ${D}${datadir}/X11/xorg.conf.d
+}
+
+FILES_${PN} += "${datadir}/X11/xorg.conf.d/20-fbturbo.conf"

recipes-graphics/xorg-xserver/xorg-driver-video.inc

@@ -0,0 +1,4 @@
+include xorg-driver-common.inc
+
+DEPENDS =+ "renderproto videoproto xextproto fontsproto"
+

recipes-graphics/xorg-xserver/xserver-xf86-config/xorg.conf

@@ -1,22 +0,0 @@
-
-Section "Device"
-    Identifier    "Generic Fbdev Driver"
-    Driver        "fbdev"
-EndSection
-
-Section "Monitor"
-    Identifier    "Generic Monitor"
-    Option        "DPMS"
-EndSection
-
-Section "Screen"
-    Identifier    "Default Screen"
-    Device        "Generic Fbdev Driver"
-    Monitor        "Generic Monitor"
-    DefaultDepth    24
-EndSection
-
-Section "ServerLayout"
-    Identifier    "Default Layout"
-    Screen        "Default Screen"
-EndSection

recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend

@@ -1,4 +1 @@
-FILESEXTRAPATHS := "${THISDIR}/${PN}"
-
-PRINC := "${@int(PRINC) + 1}"
-
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"

recipes-kernel/linux/linux-sunxi/0001-compiler-gcc5.patch

@@ -0,0 +1,71 @@
+Index: git/include/linux/compiler-gcc5.h
+===================================================================
+--- git/include/linux/compiler-gcc5.h    2015-09-19 20:11:27.999423338 +0200
++++ git/include/linux/compiler-gcc5.h    2015-09-23 10:26:05.000000000 +0200
+@@ -0,0 +1,66 @@
++#ifndef __LINUX_COMPILER_H
++#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
++#endif
++
++#define __used				__attribute__((__used__))
++#define __must_check			__attribute__((warn_unused_result))
++#define __compiler_offsetof(a, b)	__builtin_offsetof(a, b)
++
++/* Mark functions as cold. gcc will assume any path leading to a call
++   to them will be unlikely.  This means a lot of manual unlikely()s
++   are unnecessary now for any paths leading to the usual suspects
++   like BUG(), printk(), panic() etc. [but let's keep them for now for
++   older compilers]
++
++   Early snapshots of gcc 4.3 don't support this and we can't detect this
++   in the preprocessor, but we can live with this because they're unreleased.
++   Maketime probing would be overkill here.
++
++   gcc also has a __attribute__((__hot__)) to move hot functions into
++   a special section, but I don't see any sense in this right now in
++   the kernel context */
++#define __cold			__attribute__((__cold__))
++
++#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
++
++#ifndef __CHECKER__
++# define __compiletime_warning(message) __attribute__((warning(message)))
++# define __compiletime_error(message) __attribute__((error(message)))
++#endif /* __CHECKER__ */
++
++/*
++ * Mark a position in code as unreachable.  This can be used to
++ * suppress control flow warnings after asm blocks that transfer
++ * control elsewhere.
++ *
++ * Early snapshots of gcc 4.5 don't support this and we can't detect
++ * this in the preprocessor, but we can live with this because they're
++ * unreleased.  Really, we need to have autoconf for the kernel.
++ */
++#define unreachable() __builtin_unreachable()
++
++/* Mark a function definition as prohibited from being cloned. */
++#define __noclone	__attribute__((__noclone__))
++
++/*
++ * Tell the optimizer that something else uses this function or variable.
++ */
++#define __visible __attribute__((externally_visible))
++
++/*
++ * GCC 'asm goto' miscompiles certain code sequences:
++ *
++ *   http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
++ *
++ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
++ * Fixed in GCC 4.8.2 and later versions.
++ *
++ * (asm goto is automatically volatile - the naming reflects this.)
++ */
++#define asm_volatile_goto(x...)	do { asm goto(x); asm (""); } while (0)
++
++#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
++#define __HAVE_BUILTIN_BSWAP32__
++#define __HAVE_BUILTIN_BSWAP64__
++#define __HAVE_BUILTIN_BSWAP16__
++#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */

recipes-kernel/linux/linux-sunxi/0001-gcc5-fixes.patch

@@ -0,0 +1,135 @@
+From 83b0b8a7b9cb658d3cc980b4fbcbb2cc8b257ccf Mon Sep 17 00:00:00 2001
+From: Trevor Woerner <twoerner@gmail.com>
+Date: Thu, 24 Sep 2015 17:07:26 -0400
+Subject: [PATCH] gcc5 fixes
+
+gcc5 is pickier about inline functions defined in headers.
+
+Signed-off-by: Trevor Woerner <twoerner@gmail.com>
+---
+ drivers/net/wireless/rtl8188eu/include/ieee80211.h | 4 ++--
+ drivers/net/wireless/rtl8189es/include/ieee80211.h | 4 ++--
+ drivers/net/wireless/rtl8192cu/include/ieee80211.h | 8 ++++----
+ drivers/net/wireless/rtl8723as/include/ieee80211.h | 4 ++--
+ drivers/staging/rtl8712/ieee80211.h                | 4 ++--
+ 5 files changed, 12 insertions(+), 12 deletions(-)
+
+diff --git a/drivers/net/wireless/rtl8188eu/include/ieee80211.h b/drivers/net/wireless/rtl8188eu/include/ieee80211.h
+index 1ae96a5..7a301c5 100644
+--- a/drivers/net/wireless/rtl8188eu/include/ieee80211.h
++++ b/drivers/net/wireless/rtl8188eu/include/ieee80211.h
+@@ -1188,12 +1188,12 @@ enum ieee80211_state {
+ (((Addr[2]) & 0xff) == 0xff) && (((Addr[3]) & 0xff) == 0xff) && (((Addr[4]) & 0xff) == 0xff) && \
+ (((Addr[5]) & 0xff) == 0xff))
+ #else
+-extern __inline int is_multicast_mac_addr(const u8 *addr)
++static __inline int is_multicast_mac_addr(const u8 *addr)
+ {
+         return ((addr[0] != 0xff) && (0x01 & addr[0]));
+ }
+ 
+-extern __inline int is_broadcast_mac_addr(const u8 *addr)
++static __inline int is_broadcast_mac_addr(const u8 *addr)
+ {
+ 	return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&   \
+ 		(addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
+diff --git a/drivers/net/wireless/rtl8189es/include/ieee80211.h b/drivers/net/wireless/rtl8189es/include/ieee80211.h
+index 1ae96a5..7a301c5 100644
+--- a/drivers/net/wireless/rtl8189es/include/ieee80211.h
++++ b/drivers/net/wireless/rtl8189es/include/ieee80211.h
+@@ -1188,12 +1188,12 @@ enum ieee80211_state {
+ (((Addr[2]) & 0xff) == 0xff) && (((Addr[3]) & 0xff) == 0xff) && (((Addr[4]) & 0xff) == 0xff) && \
+ (((Addr[5]) & 0xff) == 0xff))
+ #else
+-extern __inline int is_multicast_mac_addr(const u8 *addr)
++static __inline int is_multicast_mac_addr(const u8 *addr)
+ {
+         return ((addr[0] != 0xff) && (0x01 & addr[0]));
+ }
+ 
+-extern __inline int is_broadcast_mac_addr(const u8 *addr)
++static __inline int is_broadcast_mac_addr(const u8 *addr)
+ {
+ 	return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&   \
+ 		(addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
+diff --git a/drivers/net/wireless/rtl8192cu/include/ieee80211.h b/drivers/net/wireless/rtl8192cu/include/ieee80211.h
+index 86e9726..950691d 100644
+--- a/drivers/net/wireless/rtl8192cu/include/ieee80211.h
++++ b/drivers/net/wireless/rtl8192cu/include/ieee80211.h
+@@ -1149,12 +1149,12 @@ enum ieee80211_state {
+ #define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
+ #define MAC_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3],((u8*)(x))[4],((u8*)(x))[5]
+ 
+-extern __inline int is_multicast_mac_addr(const u8 *addr)
++static __inline int is_multicast_mac_addr(const u8 *addr)
+ {
+         return ((addr[0] != 0xff) && (0x01 & addr[0]));
+ }
+ 
+-extern __inline int is_broadcast_mac_addr(const u8 *addr)
++static __inline int is_broadcast_mac_addr(const u8 *addr)
+ {
+ 	return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&   \
+ 		(addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
+@@ -1177,7 +1177,7 @@ typedef struct tx_pending_t{
+ #define IEEE_G            (1<<2)
+ #define IEEE_MODE_MASK    (IEEE_A|IEEE_B|IEEE_G)
+ 
+-extern __inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
++static __inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
+ {
+ 	/* Single white space is for Linksys APs */
+ 	if (essid_len == 1 && essid[0] == ' ')
+@@ -1193,7 +1193,7 @@ extern __inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
+ 	return 1;
+ }
+ 
+-extern __inline int ieee80211_get_hdrlen(u16 fc)
++static __inline int ieee80211_get_hdrlen(u16 fc)
+ {
+ 	int hdrlen = 24;
+ 
+diff --git a/drivers/net/wireless/rtl8723as/include/ieee80211.h b/drivers/net/wireless/rtl8723as/include/ieee80211.h
+index bf24c3b..f8046ee 100644
+--- a/drivers/net/wireless/rtl8723as/include/ieee80211.h
++++ b/drivers/net/wireless/rtl8723as/include/ieee80211.h
+@@ -1176,12 +1176,12 @@ enum ieee80211_state {
+ (((Addr[2]) & 0xff) == 0xff) && (((Addr[3]) & 0xff) == 0xff) && (((Addr[4]) & 0xff) == 0xff) && \
+ (((Addr[5]) & 0xff) == 0xff))
+ #else
+-extern __inline int is_multicast_mac_addr(const u8 *addr)
++static __inline int is_multicast_mac_addr(const u8 *addr)
+ {
+         return ((addr[0] != 0xff) && (0x01 & addr[0]));
+ }
+ 
+-extern __inline int is_broadcast_mac_addr(const u8 *addr)
++static __inline int is_broadcast_mac_addr(const u8 *addr)
+ {
+ 	return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&   \
+ 		(addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
+diff --git a/drivers/staging/rtl8712/ieee80211.h b/drivers/staging/rtl8712/ieee80211.h
+index 3c0092b..1e7b55b 100644
+--- a/drivers/staging/rtl8712/ieee80211.h
++++ b/drivers/staging/rtl8712/ieee80211.h
+@@ -734,7 +734,7 @@ enum ieee80211_state {
+ #define IEEE_G            (1<<2)
+ #define IEEE_MODE_MASK    (IEEE_A|IEEE_B|IEEE_G)
+ 
+-extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
++static inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
+ {
+ 	/* Single white space is for Linksys APs */
+ 	if (essid_len == 1 && essid[0] == ' ')
+@@ -748,7 +748,7 @@ extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
+ 	return 1;
+ }
+ 
+-extern inline int ieee80211_get_hdrlen(u16 fc)
++static inline int ieee80211_get_hdrlen(u16 fc)
+ {
+ 	int hdrlen = 24;
+ 
+-- 
+2.6.0.rc3
+

recipes-kernel/linux/linux-sunxi/0002-use-static-inline-in-ARM-ftrace.patch

@@ -0,0 +1,50 @@
+From ef4fea130eeb70eff4f3a549fd3f6e9b11437550 Mon Sep 17 00:00:00 2001
+From: ZaneZam <cyxman@yahoo.com>
+Date: Thu, 26 Mar 2015 14:50:10 +0100
+Subject: [PATCH] arm: LLVMLinux: use static inline in ARM ftrace.h
+
+With compilers which follow the C99 standard (like modern versions of gcc and
+clang), "extern inline" does the wrong thing (emits code for an externally
+linkable version of the inline function). In this case using static inline
+and removing the NULL version of return_address in return_address.c does
+the right thing.
+
+Signed-off-by: Behan Webster <behanw@converseincode.com>
+Reviewed-by: Mark Charlebois <charlebm@gmail.com>
+
+source: http://www.serverphorums.com/read.php?12,880351,880351#msg-880351
+---
+ arch/arm/include/asm/ftrace.h    | 2 +-
+ arch/arm/kernel/return_address.c | 2 ++
+ 2 files changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
+index f89515a..2bb8cac 100644
+--- a/arch/arm/include/asm/ftrace.h
++++ b/arch/arm/include/asm/ftrace.h
+@@ -45,7 +45,7 @@ void *return_address(unsigned int);
+ 
+ #else
+ 
+-extern inline void *return_address(unsigned int level)
++static inline void *return_address(unsigned int level)
+ {
+ 	return NULL;
+ }
+diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c
+index f1aef84..49477f0 100644
+--- a/arch/arm/kernel/return_address.c
++++ b/arch/arm/kernel/return_address.c
+@@ -62,10 +62,12 @@ void *return_address(unsigned int level)
+ /* #warning "TODO: return_address should use unwind tables" */
+ #endif
+ 
++/*
+ void *return_address(unsigned int level)
+ {
+ 	return NULL;
+ }
++*/
+ 
+ #endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) / else */
+ 

recipes-kernel/linux/linux-sunxi/cubieboard/defconfig

@@ -0,0 +1,324 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_FHANDLE=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_BLK_CGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PERF_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SGI_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_ARCH_SUN4I=y
+CONFIG_SWP_EMULATE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_HIGHMEM=y
+CONFIG_COMPACTION=y
+CONFIG_KSM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_FANTASY=y
+CONFIG_CPU_FREQ_DVFS=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_IPV6_SIT=m
+# CONFIG_ANDROID_PARANOID_NETWORK is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=y
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_NET_PKTGEN=m
+CONFIG_BT=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_CFG80211=y
+CONFIG_RFKILL=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_CMA=y
+CONFIG_CMA_SIZE_MBYTES=192
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_SUNXI_DBGREG=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SW_SATA_AHCI_PLATFORM=m
+CONFIG_NETDEVICES=y
+CONFIG_TUN=m
+CONFIG_SUNXI_EMAC=y
+CONFIG_PHYLIB=y
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_HSO=m
+CONFIG_USB_IPHETH=m
+CONFIG_RTL8192CU_SW=m
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_KEYRESET=y
+CONFIG_KEYBOARD_SUN4IKEYPAD=m
+CONFIG_KEYBOARD_SUN4I_KEYBOARD=m
+CONFIG_KEYBOARD_HV2605_KEYBOARD=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_GT801=m
+CONFIG_TOUCHSCREEN_GT811=m
+CONFIG_TOUCHSCREEN_GT818=m
+CONFIG_TOUCHSCREEN_SUN4I_TS=m
+CONFIG_TOUCHSCREEN_FT5X_TS=m
+CONFIG_TOUCHSCREEN_ZT8031=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_SUNXI=m
+CONFIG_W1=m
+CONFIG_W1_SUNXI=m
+CONFIG_W1_MASTER_GPIO=m
+CONFIG_POWER_SUPPLY=y
+CONFIG_AW_AXP=y
+CONFIG_REGULATOR=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+# CONFIG_MEDIA_TUNER_MC44S803 is not set
+# CONFIG_MEDIA_TUNER_MAX2165 is not set
+# CONFIG_MEDIA_TUNER_TDA18218 is not set
+# CONFIG_MEDIA_TUNER_TDA18212 is not set
+# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
+CONFIG_CSI_OV7670=m
+CONFIG_CSI_GT2005=m
+CONFIG_CSI_GC0308=m
+CONFIG_CSI_HI704=m
+CONFIG_CSI_SP0838=m
+CONFIG_CSI_MT9M112=m
+CONFIG_CSI_MT9M113=m
+CONFIG_CSI_OV2655=m
+CONFIG_CSI_HI253=m
+CONFIG_CSI_MT9D112=m
+CONFIG_CSI_GC0307=m
+CONFIG_CSI_OV5640=m
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_AUDIO_ENGINE=y
+CONFIG_PA_CONTROL=y
+CONFIG_DRM=m
+CONFIG_DRM_MALI=m
+CONFIG_MALI=m
+CONFIG_FB=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_REALTEK=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_FILE_STORAGE_TEST=y
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_SUNXI_POWER_CONTROL=y
+CONFIG_MMC_SUNXI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SUNXI=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SUN4I=y
+CONFIG_STAGING=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QFMT_V2=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+CONFIG_CACHEFILES=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_CIFS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_LIST=y
+CONFIG_BOOT_PRINTK_DELAY=y
+CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
+# CONFIG_FTRACE is not set
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SECURITYFS=y
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_LIBCRC32C=y
+CONFIG_AVERAGE=y

recipes-kernel/linux/linux-sunxi/forfun-q88db/defconfig

@@ -0,0 +1,330 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_FHANDLE=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_BLK_CGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PERF_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SGI_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_ARCH_SUN5I=y
+CONFIG_SW_DEBUG_UART=1
+CONFIG_SWP_EMULATE=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_COMPACTION=y
+CONFIG_KSM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_INTERACTIVE=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_USR_EVNT_NOTIFY=y
+CONFIG_CPU_FREQ_DVFS=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+# CONFIG_ANDROID_PARANOID_NETWORK is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_BRIDGE=y
+CONFIG_VLAN_8021Q=y
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_NET_PKTGEN=m
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_CMA=y
+CONFIG_CMA_SIZE_MBYTES=192
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_UB=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
+CONFIG_DM_MULTIPATH=y
+CONFIG_DM_MULTIPATH_QL=y
+CONFIG_DM_MULTIPATH_ST=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_PHYLIB=y
+CONFIG_USB_CATC=y
+CONFIG_USB_KAWETH=y
+CONFIG_USB_PEGASUS=y
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_CDC_EEM=y
+CONFIG_USB_NET_DM9601=y
+CONFIG_USB_NET_SMSC75XX=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_NET_GL620A=y
+CONFIG_USB_NET_PLUSB=y
+CONFIG_USB_NET_MCS7830=y
+CONFIG_USB_NET_RNDIS_HOST=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_CX82310_ETH=y
+CONFIG_USB_NET_KALMIA=y
+CONFIG_USB_NET_QMI_WWAN=y
+CONFIG_USB_NET_INT51X1=y
+CONFIG_USB_IPHETH=y
+CONFIG_USB_SIERRA_NET=y
+CONFIG_USB_VL600=y
+CONFIG_RTL8192CU_SW=m
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_SUN4IKEYPAD=m
+CONFIG_KEYBOARD_SUN4I_KEYBOARD=m
+CONFIG_KEYBOARD_HV2605_KEYBOARD=m
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_GT801=m
+CONFIG_TOUCHSCREEN_GT811=m
+CONFIG_TOUCHSCREEN_GT818=m
+CONFIG_TOUCHSCREEN_SUN4I_TS=m
+CONFIG_TOUCHSCREEN_FT5X_TS=m
+CONFIG_TOUCHSCREEN_ZT8031=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_SPI=y
+CONFIG_SPI_SUN5I=y
+CONFIG_SUN5I_SPI_NDMA=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_SUNXI=m
+CONFIG_W1=m
+CONFIG_W1_SUNXI=m
+CONFIG_W1_MASTER_GPIO=m
+CONFIG_POWER_SUPPLY=y
+CONFIG_AW_AXP=y
+# CONFIG_SENSORS_MMA7660 is not set
+CONFIG_REGULATOR=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_PA_CONTROL=y
+CONFIG_DRM=m
+CONFIG_DRM_MALI=m
+CONFIG_MALI=m
+# CONFIG_UMP_DEBUG is not set
+CONFIG_FB=y
+CONFIG_FB_SUNXI=m
+CONFIG_FB_SUNXI_LCD=m
+CONFIG_FB_SUNXI_HDMI=m
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_REALTEK=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=y
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_GADGET=y
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_SUNXI_POWER_CONTROL=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SUNXI=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_SWITCH=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SUN5I=y
+CONFIG_STAGING=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+CONFIG_CACHEFILES=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_CIFS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_LIST=y
+CONFIG_BOOT_PRINTK_DELAY=y
+CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
+# CONFIG_FTRACE is not set
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_DEBUG_LL=y
+CONFIG_SECURITYFS=y
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_LIBCRC32C=y

recipes-kernel/linux/linux-sunxi/mele/defconfig

@@ -0,0 +1,343 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_FHANDLE=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_BLK_CGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PERF_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SGI_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_ARCH_SUN4I=y
+CONFIG_SWP_EMULATE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_COMPACTION=y
+CONFIG_KSM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_FANTASY=y
+CONFIG_CPU_FREQ_DVFS=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_IPV6_SIT=m
+# CONFIG_ANDROID_PARANOID_NETWORK is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=y
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_NET_PKTGEN=m
+CONFIG_BT=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_CFG80211=y
+CONFIG_RFKILL=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_CMA=y
+CONFIG_CMA_SIZE_MBYTES=192
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_SUNXI_NAND=y
+CONFIG_SUNXI_DBGREG=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SW_SATA_AHCI_PLATFORM=m
+CONFIG_NETDEVICES=y
+CONFIG_TUN=m
+CONFIG_SUNXI_EMAC=y
+CONFIG_PHYLIB=y
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_HSO=m
+CONFIG_USB_IPHETH=m
+CONFIG_RTL8192CU_SW=m
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_KEYRESET=y
+CONFIG_KEYBOARD_SUN4IKEYPAD=y
+CONFIG_KEYBOARD_SUN4I_KEYBOARD=y
+CONFIG_KEYBOARD_HV2605_KEYBOARD=y
+CONFIG_IR_SUNXI=y
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ELO=y
+CONFIG_TOUCHSCREEN_GT801=m
+CONFIG_TOUCHSCREEN_GT811=m
+CONFIG_TOUCHSCREEN_GT818=m
+CONFIG_TOUCHSCREEN_SUN4I_TS=m
+CONFIG_TOUCHSCREEN_FT5X_TS=m
+CONFIG_TOUCHSCREEN_ZT8031=m
+CONFIG_INPUT_MISC=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_SUNXI=y
+CONFIG_W1=m
+CONFIG_W1_SUNXI=m
+CONFIG_W1_MASTER_GPIO=m
+CONFIG_POWER_SUPPLY=y
+CONFIG_AW_AXP=y
+CONFIG_WATCHDOG=y
+CONFIG_SUNXI_WDT=y
+CONFIG_REGULATOR=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+# CONFIG_MEDIA_TUNER_MC44S803 is not set
+# CONFIG_MEDIA_TUNER_MAX2165 is not set
+# CONFIG_MEDIA_TUNER_TDA18218 is not set
+# CONFIG_MEDIA_TUNER_TDA18212 is not set
+# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
+CONFIG_CSI_OV7670=m
+CONFIG_CSI_GT2005=m
+CONFIG_CSI_GC0308=m
+CONFIG_CSI_HI704=m
+CONFIG_CSI_SP0838=m
+CONFIG_CSI_MT9M112=m
+CONFIG_CSI_MT9M113=m
+CONFIG_CSI_OV2655=m
+CONFIG_CSI_HI253=m
+CONFIG_CSI_MT9D112=m
+CONFIG_CSI_GC0307=m
+CONFIG_CSI_OV5640=m
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_AUDIO_ENGINE=y
+CONFIG_PA_CONTROL=y
+CONFIG_DRM=y
+CONFIG_DRM_MALI=m
+CONFIG_MALI=m
+CONFIG_FB=y
+CONFIG_FB_SUNXI=y
+CONFIG_FB_SUNXI_LCD=y
+CONFIG_FB_SUNXI_HDMI=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_SUNXI_SOC_SPDIF=y
+CONFIG_SND_SUNXI_SOC_I2S_INTERFACE=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_REALTEK=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_CP210X=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_IR=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_GADGET=y
+CONFIG_USB_AUDIO=m
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_FILE_STORAGE_TEST=y
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_SUNXI_POWER_CONTROL=y
+CONFIG_MMC_SUNXI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SUNXI=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SUN4I=y
+CONFIG_STAGING=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QFMT_V2=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+CONFIG_CACHEFILES=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_CIFS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_LIST=y
+CONFIG_BOOT_PRINTK_DELAY=y
+CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
+# CONFIG_FTRACE is not set
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SECURITYFS=y
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_LIBCRC32C=y
+CONFIG_AVERAGE=y

recipes-kernel/linux/linux-sunxi/meleg/defconfig

@@ -0,0 +1,343 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_FHANDLE=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_BLK_CGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PERF_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SGI_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_ARCH_SUN4I=y
+CONFIG_SWP_EMULATE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_COMPACTION=y
+CONFIG_KSM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_FANTASY=y
+CONFIG_CPU_FREQ_DVFS=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_IPV6_SIT=m
+# CONFIG_ANDROID_PARANOID_NETWORK is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=y
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_NET_PKTGEN=m
+CONFIG_BT=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_CFG80211=y
+CONFIG_RFKILL=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_CMA=y
+CONFIG_CMA_SIZE_MBYTES=192
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_SUNXI_NAND=y
+CONFIG_SUNXI_DBGREG=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SW_SATA_AHCI_PLATFORM=m
+CONFIG_NETDEVICES=y
+CONFIG_TUN=m
+CONFIG_SUNXI_EMAC=y
+CONFIG_PHYLIB=y
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_HSO=m
+CONFIG_USB_IPHETH=m
+CONFIG_RTL8192CU_SW=m
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_KEYRESET=y
+CONFIG_KEYBOARD_SUN4IKEYPAD=y
+CONFIG_KEYBOARD_SUN4I_KEYBOARD=y
+CONFIG_KEYBOARD_HV2605_KEYBOARD=y
+CONFIG_IR_SUNXI=y
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ELO=y
+CONFIG_TOUCHSCREEN_GT801=m
+CONFIG_TOUCHSCREEN_GT811=m
+CONFIG_TOUCHSCREEN_GT818=m
+CONFIG_TOUCHSCREEN_SUN4I_TS=m
+CONFIG_TOUCHSCREEN_FT5X_TS=m
+CONFIG_TOUCHSCREEN_ZT8031=m
+CONFIG_INPUT_MISC=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_SUNXI=y
+CONFIG_W1=m
+CONFIG_W1_SUNXI=m
+CONFIG_W1_MASTER_GPIO=m
+CONFIG_POWER_SUPPLY=y
+CONFIG_AW_AXP=y
+CONFIG_WATCHDOG=y
+CONFIG_SUNXI_WDT=y
+CONFIG_REGULATOR=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+# CONFIG_MEDIA_TUNER_MC44S803 is not set
+# CONFIG_MEDIA_TUNER_MAX2165 is not set
+# CONFIG_MEDIA_TUNER_TDA18218 is not set
+# CONFIG_MEDIA_TUNER_TDA18212 is not set
+# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
+CONFIG_CSI_OV7670=m
+CONFIG_CSI_GT2005=m
+CONFIG_CSI_GC0308=m
+CONFIG_CSI_HI704=m
+CONFIG_CSI_SP0838=m
+CONFIG_CSI_MT9M112=m
+CONFIG_CSI_MT9M113=m
+CONFIG_CSI_OV2655=m
+CONFIG_CSI_HI253=m
+CONFIG_CSI_MT9D112=m
+CONFIG_CSI_GC0307=m
+CONFIG_CSI_OV5640=m
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_AUDIO_ENGINE=y
+CONFIG_PA_CONTROL=y
+CONFIG_DRM=y
+CONFIG_DRM_MALI=m
+CONFIG_MALI=m
+CONFIG_FB=y
+CONFIG_FB_SUNXI=y
+CONFIG_FB_SUNXI_LCD=y
+CONFIG_FB_SUNXI_HDMI=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_SND_SUNXI_SOC_SPDIF=y
+CONFIG_SND_SUNXI_SOC_I2S_INTERFACE=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_REALTEK=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_CP210X=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_IR=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+CONFIG_USB_GADGET=y
+CONFIG_USB_AUDIO=m
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_FILE_STORAGE_TEST=y
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_SUNXI_POWER_CONTROL=y
+CONFIG_MMC_SUNXI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SUNXI=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SUN4I=y
+CONFIG_STAGING=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QFMT_V2=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+CONFIG_CACHEFILES=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_CIFS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_LIST=y
+CONFIG_BOOT_PRINTK_DELAY=y
+CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
+# CONFIG_FTRACE is not set
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SECURITYFS=y
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_LIBCRC32C=y
+CONFIG_AVERAGE=y

recipes-kernel/linux/linux-sunxi/olinuxino-a10/defconfig

@@ -0,0 +1,327 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_FHANDLE=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_BLK_CGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PERF_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SGI_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_ARCH_SUN4I=y
+CONFIG_SWP_EMULATE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_HIGHMEM=y
+CONFIG_COMPACTION=y
+CONFIG_KSM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_FANTASY=y
+CONFIG_CPU_FREQ_DVFS=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_IPV6_SIT=m
+# CONFIG_ANDROID_PARANOID_NETWORK is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=y
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_NET_PKTGEN=m
+CONFIG_BT=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_CFG80211=y
+CONFIG_RFKILL=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_CMA=y
+CONFIG_CMA_SIZE_MBYTES=192
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_SUNXI_DBGREG=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SW_SATA_AHCI_PLATFORM=m
+CONFIG_NETDEVICES=y
+CONFIG_TUN=m
+CONFIG_SUNXI_EMAC=y
+CONFIG_PHYLIB=y
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_HSO=m
+CONFIG_USB_IPHETH=m
+CONFIG_RTL8192CU_SW=m
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_KEYRESET=y
+CONFIG_KEYBOARD_SUN4IKEYPAD=m
+CONFIG_KEYBOARD_SUN4I_KEYBOARD=m
+CONFIG_KEYBOARD_HV2605_KEYBOARD=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_GT801=m
+CONFIG_TOUCHSCREEN_GT811=m
+CONFIG_TOUCHSCREEN_GT818=m
+CONFIG_TOUCHSCREEN_SUN4I_TS=m
+CONFIG_TOUCHSCREEN_FT5X_TS=m
+CONFIG_TOUCHSCREEN_ZT8031=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_SUNXI=m
+CONFIG_W1=m
+CONFIG_W1_SUNXI=m
+CONFIG_W1_MASTER_GPIO=m
+CONFIG_POWER_SUPPLY=y
+CONFIG_AW_AXP=y
+CONFIG_REGULATOR=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+# CONFIG_MEDIA_TUNER_MC44S803 is not set
+# CONFIG_MEDIA_TUNER_MAX2165 is not set
+# CONFIG_MEDIA_TUNER_TDA18218 is not set
+# CONFIG_MEDIA_TUNER_TDA18212 is not set
+# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
+CONFIG_CSI_OV7670=m
+CONFIG_CSI_GT2005=m
+CONFIG_CSI_GC0308=m
+CONFIG_CSI_HI704=m
+CONFIG_CSI_SP0838=m
+CONFIG_CSI_MT9M112=m
+CONFIG_CSI_MT9M113=m
+CONFIG_CSI_OV2655=m
+CONFIG_CSI_HI253=m
+CONFIG_CSI_MT9D112=m
+CONFIG_CSI_GC0307=m
+CONFIG_CSI_OV5640=m
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_AUDIO_ENGINE=y
+CONFIG_PA_CONTROL=y
+CONFIG_DRM=m
+CONFIG_DRM_MALI=m
+CONFIG_MALI=m
+CONFIG_FB=y
+CONFIG_FB_SUNXI=y
+CONFIG_FB_SUNXI_LCD=y
+CONFIG_FB_SUNXI_HDMI=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_REALTEK=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_FILE_STORAGE_TEST=y
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_SUNXI_POWER_CONTROL=y
+CONFIG_MMC_SUNXI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SUNXI=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SUN4I=y
+CONFIG_STAGING=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QFMT_V2=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+CONFIG_CACHEFILES=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_CIFS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_LIST=y
+CONFIG_BOOT_PRINTK_DELAY=y
+CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
+# CONFIG_FTRACE is not set
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SECURITYFS=y
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_LIBCRC32C=y
+CONFIG_AVERAGE=y

recipes-kernel/linux/linux-sunxi/olinuxino-a10lime/defconfig

@@ -0,0 +1,327 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_FHANDLE=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_BLK_CGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PERF_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SGI_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_ARCH_SUN4I=y
+CONFIG_SWP_EMULATE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_HIGHMEM=y
+CONFIG_COMPACTION=y
+CONFIG_KSM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_FANTASY=y
+CONFIG_CPU_FREQ_DVFS=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_IPV6_SIT=m
+# CONFIG_ANDROID_PARANOID_NETWORK is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=y
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_NET_PKTGEN=m
+CONFIG_BT=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_CFG80211=y
+CONFIG_RFKILL=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_CMA=y
+CONFIG_CMA_SIZE_MBYTES=192
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_SUNXI_DBGREG=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SW_SATA_AHCI_PLATFORM=m
+CONFIG_NETDEVICES=y
+CONFIG_TUN=m
+CONFIG_SUNXI_EMAC=y
+CONFIG_PHYLIB=y
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_HSO=m
+CONFIG_USB_IPHETH=m
+CONFIG_RTL8192CU_SW=m
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_KEYRESET=y
+CONFIG_KEYBOARD_SUN4IKEYPAD=m
+CONFIG_KEYBOARD_SUN4I_KEYBOARD=m
+CONFIG_KEYBOARD_HV2605_KEYBOARD=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_GT801=m
+CONFIG_TOUCHSCREEN_GT811=m
+CONFIG_TOUCHSCREEN_GT818=m
+CONFIG_TOUCHSCREEN_SUN4I_TS=m
+CONFIG_TOUCHSCREEN_FT5X_TS=m
+CONFIG_TOUCHSCREEN_ZT8031=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_SUNXI=m
+CONFIG_W1=m
+CONFIG_W1_SUNXI=m
+CONFIG_W1_MASTER_GPIO=m
+CONFIG_POWER_SUPPLY=y
+CONFIG_AW_AXP=y
+CONFIG_REGULATOR=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+# CONFIG_MEDIA_TUNER_MC44S803 is not set
+# CONFIG_MEDIA_TUNER_MAX2165 is not set
+# CONFIG_MEDIA_TUNER_TDA18218 is not set
+# CONFIG_MEDIA_TUNER_TDA18212 is not set
+# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
+CONFIG_CSI_OV7670=m
+CONFIG_CSI_GT2005=m
+CONFIG_CSI_GC0308=m
+CONFIG_CSI_HI704=m
+CONFIG_CSI_SP0838=m
+CONFIG_CSI_MT9M112=m
+CONFIG_CSI_MT9M113=m
+CONFIG_CSI_OV2655=m
+CONFIG_CSI_HI253=m
+CONFIG_CSI_MT9D112=m
+CONFIG_CSI_GC0307=m
+CONFIG_CSI_OV5640=m
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_AUDIO_ENGINE=y
+CONFIG_PA_CONTROL=y
+CONFIG_DRM=m
+CONFIG_DRM_MALI=m
+CONFIG_MALI=m
+CONFIG_FB=y
+CONFIG_FB_SUNXI=y
+CONFIG_FB_SUNXI_LCD=y
+CONFIG_FB_SUNXI_HDMI=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_REALTEK=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_FILE_STORAGE_TEST=y
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_SUNXI_POWER_CONTROL=y
+CONFIG_MMC_SUNXI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SUNXI=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SUN4I=y
+CONFIG_STAGING=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QFMT_V2=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+CONFIG_CACHEFILES=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_CIFS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_LIST=y
+CONFIG_BOOT_PRINTK_DELAY=y
+CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
+# CONFIG_FTRACE is not set
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SECURITYFS=y
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_LIBCRC32C=y
+CONFIG_AVERAGE=y

recipes-kernel/linux/linux-sunxi/olinuxino-a10s/defconfig

@@ -0,0 +1,275 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_FHANDLE=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_BLK_CGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PERF_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SGI_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_ARCH_SUN5I=y
+CONFIG_SWP_EMULATE=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_COMPACTION=y
+CONFIG_KSM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=448M@0x40000000 console=ttyS0,115200"
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+# CONFIG_ANDROID_PARANOID_NETWORK is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_BRIDGE=y
+CONFIG_VLAN_8021Q=y
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_NET_PKTGEN=m
+CONFIG_CFG80211=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_MAC80211=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_CMA=y
+CONFIG_CMA_SIZE_MBYTES=192
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_SUNXI_NAND=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_NETDEVICES=y
+CONFIG_SUNXI_EMAC=y
+CONFIG_PHYLIB=y
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_SUN4IKEYPAD=m
+CONFIG_KEYBOARD_SUN4I_KEYBOARD=m
+CONFIG_KEYBOARD_HV2605_KEYBOARD=m
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_GT801=m
+CONFIG_TOUCHSCREEN_GT811=m
+CONFIG_TOUCHSCREEN_GT818=m
+CONFIG_TOUCHSCREEN_SUN4I_TS=m
+CONFIG_TOUCHSCREEN_FT5X_TS=m
+CONFIG_TOUCHSCREEN_ZT8031=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_SPI=y
+CONFIG_SPI_SUN5I=y
+CONFIG_SUN5I_SPI_NDMA=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_SUNXI=m
+CONFIG_W1=m
+CONFIG_W1_SUNXI=m
+CONFIG_W1_MASTER_GPIO=m
+CONFIG_POWER_SUPPLY=y
+CONFIG_AW_AXP=y
+CONFIG_REGULATOR=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_PA_CONTROL=y
+CONFIG_MALI=m
+# CONFIG_UMP_DEBUG is not set
+CONFIG_FB=y
+CONFIG_FB_SUNXI=y
+CONFIG_FB_SUNXI_LCD=y
+CONFIG_FB_SUNXI_HDMI=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_HID_KYE=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_REALTEK=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=y
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_GADGET=y
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_FILE_STORAGE_TEST=y
+CONFIG_USB_SW_SUNXI_USB=y
+CONFIG_USB_SW_SUNXI_USB_MANAGER=y
+CONFIG_USB_SW_SUNXI_USB_DEBUG=y
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_SUNXI_POWER_CONTROL=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SUNXI=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SUN5I=y
+CONFIG_STAGING=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+CONFIG_CACHEFILES=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_CIFS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_LIST=y
+CONFIG_BOOT_PRINTK_DELAY=y
+CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
+# CONFIG_FTRACE is not set
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_DEBUG_LL=y
+CONFIG_SECURITYFS=y
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_LIBCRC32C=y

recipes-kernel/linux/linux-sunxi/olinuxino-a13/defconfig

@@ -0,0 +1,330 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_FHANDLE=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_BLK_CGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PERF_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SGI_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_ARCH_SUN5I=y
+CONFIG_SW_DEBUG_UART=1
+CONFIG_SWP_EMULATE=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_COMPACTION=y
+CONFIG_KSM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_INTERACTIVE=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_USR_EVNT_NOTIFY=y
+CONFIG_CPU_FREQ_DVFS=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+# CONFIG_ANDROID_PARANOID_NETWORK is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_BRIDGE=y
+CONFIG_VLAN_8021Q=y
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_NET_PKTGEN=m
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_CMA=y
+CONFIG_CMA_SIZE_MBYTES=192
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_UB=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
+CONFIG_DM_MULTIPATH=y
+CONFIG_DM_MULTIPATH_QL=y
+CONFIG_DM_MULTIPATH_ST=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_PHYLIB=y
+CONFIG_USB_CATC=y
+CONFIG_USB_KAWETH=y
+CONFIG_USB_PEGASUS=y
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_CDC_EEM=y
+CONFIG_USB_NET_DM9601=y
+CONFIG_USB_NET_SMSC75XX=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_NET_GL620A=y
+CONFIG_USB_NET_PLUSB=y
+CONFIG_USB_NET_MCS7830=y
+CONFIG_USB_NET_RNDIS_HOST=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_CX82310_ETH=y
+CONFIG_USB_NET_KALMIA=y
+CONFIG_USB_NET_QMI_WWAN=y
+CONFIG_USB_NET_INT51X1=y
+CONFIG_USB_IPHETH=y
+CONFIG_USB_SIERRA_NET=y
+CONFIG_USB_VL600=y
+CONFIG_RTL8192CU_SW=m
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_SUN4IKEYPAD=m
+CONFIG_KEYBOARD_SUN4I_KEYBOARD=m
+CONFIG_KEYBOARD_HV2605_KEYBOARD=m
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_GT801=m
+CONFIG_TOUCHSCREEN_GT811=m
+CONFIG_TOUCHSCREEN_GT818=m
+CONFIG_TOUCHSCREEN_SUN4I_TS=m
+CONFIG_TOUCHSCREEN_FT5X_TS=m
+CONFIG_TOUCHSCREEN_ZT8031=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_SPI=y
+CONFIG_SPI_SUN5I=y
+CONFIG_SUN5I_SPI_NDMA=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_SUNXI=m
+CONFIG_W1=m
+CONFIG_W1_SUNXI=m
+CONFIG_W1_MASTER_GPIO=m
+CONFIG_POWER_SUPPLY=y
+CONFIG_AW_AXP=y
+# CONFIG_SENSORS_MMA7660 is not set
+CONFIG_REGULATOR=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_PA_CONTROL=y
+CONFIG_DRM=m
+CONFIG_DRM_MALI=m
+CONFIG_MALI=m
+# CONFIG_UMP_DEBUG is not set
+CONFIG_FB=y
+CONFIG_FB_SUNXI=m
+CONFIG_FB_SUNXI_LCD=m
+CONFIG_FB_SUNXI_HDMI=m
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_REALTEK=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=y
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_GADGET=y
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_SUNXI_POWER_CONTROL=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SUNXI=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_SWITCH=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SUN5I=y
+CONFIG_STAGING=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+CONFIG_CACHEFILES=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_CIFS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_LIST=y
+CONFIG_BOOT_PRINTK_DELAY=y
+CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
+# CONFIG_FTRACE is not set
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_DEBUG_LL=y
+CONFIG_SECURITYFS=y
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_LIBCRC32C=y

recipes-kernel/linux/linux-sunxi/olinuxino-a13som/defconfig

@@ -0,0 +1,330 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_FHANDLE=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_BLK_CGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PERF_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SGI_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_ARCH_SUN5I=y
+CONFIG_SW_DEBUG_UART=1
+CONFIG_SWP_EMULATE=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_COMPACTION=y
+CONFIG_KSM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_INTERACTIVE=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_USR_EVNT_NOTIFY=y
+CONFIG_CPU_FREQ_DVFS=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+# CONFIG_ANDROID_PARANOID_NETWORK is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_BRIDGE=y
+CONFIG_VLAN_8021Q=y
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_NET_PKTGEN=m
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_CMA=y
+CONFIG_CMA_SIZE_MBYTES=192
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_UB=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
+CONFIG_DM_MULTIPATH=y
+CONFIG_DM_MULTIPATH_QL=y
+CONFIG_DM_MULTIPATH_ST=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_PHYLIB=y
+CONFIG_USB_CATC=y
+CONFIG_USB_KAWETH=y
+CONFIG_USB_PEGASUS=y
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_CDC_EEM=y
+CONFIG_USB_NET_DM9601=y
+CONFIG_USB_NET_SMSC75XX=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_NET_GL620A=y
+CONFIG_USB_NET_PLUSB=y
+CONFIG_USB_NET_MCS7830=y
+CONFIG_USB_NET_RNDIS_HOST=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_CX82310_ETH=y
+CONFIG_USB_NET_KALMIA=y
+CONFIG_USB_NET_QMI_WWAN=y
+CONFIG_USB_NET_INT51X1=y
+CONFIG_USB_IPHETH=y
+CONFIG_USB_SIERRA_NET=y
+CONFIG_USB_VL600=y
+CONFIG_RTL8192CU_SW=m
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_SUN4IKEYPAD=m
+CONFIG_KEYBOARD_SUN4I_KEYBOARD=m
+CONFIG_KEYBOARD_HV2605_KEYBOARD=m
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_GT801=m
+CONFIG_TOUCHSCREEN_GT811=m
+CONFIG_TOUCHSCREEN_GT818=m
+CONFIG_TOUCHSCREEN_SUN4I_TS=m
+CONFIG_TOUCHSCREEN_FT5X_TS=m
+CONFIG_TOUCHSCREEN_ZT8031=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_SPI=y
+CONFIG_SPI_SUN5I=y
+CONFIG_SUN5I_SPI_NDMA=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_SUNXI=m
+CONFIG_W1=m
+CONFIG_W1_SUNXI=m
+CONFIG_W1_MASTER_GPIO=m
+CONFIG_POWER_SUPPLY=y
+CONFIG_AW_AXP=y
+# CONFIG_SENSORS_MMA7660 is not set
+CONFIG_REGULATOR=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_PA_CONTROL=y
+CONFIG_DRM=m
+CONFIG_DRM_MALI=m
+CONFIG_MALI=m
+# CONFIG_UMP_DEBUG is not set
+CONFIG_FB=y
+CONFIG_FB_SUNXI=m
+CONFIG_FB_SUNXI_LCD=m
+CONFIG_FB_SUNXI_HDMI=m
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_REALTEK=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=y
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_GADGET=y
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_SUNXI_POWER_CONTROL=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SUNXI=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_SWITCH=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SUN5I=y
+CONFIG_STAGING=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+CONFIG_CACHEFILES=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_CIFS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_LIST=y
+CONFIG_BOOT_PRINTK_DELAY=y
+CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
+# CONFIG_FTRACE is not set
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_DEBUG_LL=y
+CONFIG_SECURITYFS=y
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_LIBCRC32C=y

recipes-kernel/linux/linux-sunxi_3.4.bb

@@ -0,0 +1,55 @@
+require linux.inc
+
+DESCRIPTION = "Linux kernel for Allwinner a10/a20 processors"
+
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
+RDEPENDS_${PN} += "sunxi-board-fex"
+
+PV = "3.4.104"
+PR = "r1"
+SRCREV_pn-${PN} = "d47d367036be38c5180632ec8a3ad169a4593a88"
+
+MACHINE_KERNEL_PR_append = "a"
+
+SRC_URI += "git://github.com/linux-sunxi/linux-sunxi.git;branch=sunxi-3.4;protocol=git \
+        file://0001-compiler-gcc5.patch \
+        file://0002-use-static-inline-in-ARM-ftrace.patch \
+        file://0001-gcc5-fixes.patch \
+        file://defconfig \
+        "
+
+S = "${WORKDIR}/git"
+
+#fix QA issue "Files/directories were installed but not shipped: /usr/src/debug"
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
+
+do_configure_prepend() {
+    #fix arch QA issues ("Architecture did not match")
+    rm -f ${S}/drivers/net/wireless/rtxx7x/tools/bin2h
+    rm -f ${S}/modules/wifi/ar6302/AR6K_SDK_ISC.build_3.1_RC.329/host/lib/wac/wac
+    rm -f ${S}/modules/wifi/ar6302/AR6K_SDK_ISC.build_3.1_RC.329/host/tools/pal_host_intf/pal_app
+    rm -f ${S}/modules/wifi/nano-c047.12/obj/hic-proxy
+    rm -f ${S}/modules/wifi/nano-c047.12/obj/x_mac_4.69.axf
+    rm -f ${S}/modules/wifi/nano-c047.12/obj/x_mac_patch_4_65.axf
+    rm -f ${S}/modules/wifi/nano-c047.12/obj/x_mac_4.66.axf
+    rm -f ${S}/modules/wifi/nano-c047.12/obj/x_mac-v4.68.axf
+    rm -f ${S}/modules/wifi/nano-c047.12/obj/x_mac.axf
+    rm -f ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/wl
+    rm -f ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/socket_noasd/x86/wl_server_socket
+    rm -f ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/wifi_noasd/x86/wl_server_serial
+    rm -f ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/wifi_noasd/x86/wl_server_wifi
+    rm -f ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/make/wl
+    rm -f ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/make/socket_noasd/x86/wl_server_socket
+    rm -f ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/make/wifi_noasd/x86/wl_server_serial
+    rm -f ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/make/wifi_noasd/x86/wl_server_wifi
+    rm -f ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/make/dongle_noasd/x86/wl_server_dongle
+    rm -f ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/dongle_noasd/x86/wl_server_dongle
+    rm -f ${S}/modules/wifi/bcm40181/apps/tc_cli
+    rm -f ${S}/modules/wifi/bcm40181/apps/wfa_ca
+    rm -f ${S}/modules/wifi/bcm40181/apps/dhd
+    rm -f ${S}/modules/wifi/bcm40181/apps/ca_cli
+
+    #fix ldflags QA issues ("No GNU_HASH in the elf binary")
+    rm -f ${S}/modules/wifi/usi-bcm4329/v4.218.248.15/apps/epi_ttcp
+    rm -f ${S}/modules/wifi/bcm40181/apps/epi_ttcp
+}

recipes-kernel/linux/linux.inc

@@ -1,282 +1,131 @@
 DESCRIPTION = "Linux Kernel"
 SECTION = "kernel"
 LICENSE = "GPLv2"
-
 LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
 
+INC_PR = "r0"
+
 inherit kernel siteinfo
 
-# Try to build & install perf
-#require recipes-kernel/linux/linux-tools.inc
-
-RPSRC = "http://www.rpsys.net/openzaurus/patches/archive"
-
 # Enable OABI compat for people stuck with obsolete userspace
-ARM_KEEP_OABI ?= "1"
-
-# Quirk for udev greater or equal 141
-UDEV_GE_141 ?= "0"
-
-# Specify the commandline for your device
-
-# Boot from mmc
-CMDLINE_at91sam9263ek = "mem=64M console=ttyS0,115200 root=/dev/mmcblk0p1 rootfstype=ext2 rootdelay=5"
-# Boot from nfs
-#CMDLINE_at91sam9263ek = "mem=64M console=ttyS0,115200 root=301 root=/dev/nfs nfsroot=172.20.3.1:/data/at91 ip=172.20.0.5:::255.255.0.0"
+ARM_KEEP_OABI ?= "0"
 
 # Set the verbosity of kernel messages during runtime
-# You can define CMDLINE_DEBUG in your local.conf or distro.conf to override this behaviour  
-CMDLINE_DEBUG ?= '${@base_conditional("DISTRO_TYPE", "release", "quiet", "debug", d)}'
-CMDLINE_append = " ${CMDLINE_DEBUG} "
+# You can define CMDLINE_DEBUG in your local.conf or distro.conf to override this behaviour
+CMDLINE_DEBUG ?= "loglevel=3"
 
 # Kernel bootlogo is distro-specific (default is OE logo).
 # Logo resolution (qvga, vga, ...) is machine-specific.
-LOGO_SIZE ?= "."
+LOGO_SIZE ?= '${@base_conditional("MACHINE_GUI_CLASS", "bigscreen", "vga", "qvga", d)}'
+# To use this, add file://${LOGO_SIZE}/logo_linux_clut224.ppm.bz2 or similar
+# to your kernel recipe, and then structure your logos for each resolution
+# accordingly.
 
-# Support for binary device tree generation
+LOCALVERSION ?= ""
 
-FILES_kernel-devicetree = "/boot/devicetree*"
-
-KERNEL_DEVICETREE_boc01 = "${WORKDIR}/boc01.dts"
-KERNEL_DEVICETREE_calamari = "arch/${ARCH}/boot/dts/mpc8536ds.dts"
-KERNEL_DEVICETREE_canyonlands = "arch/${ARCH}/boot/dts/canyonlands.dts"
-KERNEL_DEVICETREE_kilauea = "arch/${ARCH}/boot/dts/kilauea.dts"
-KERNEL_DEVICETREE_lite5200 = "arch/${ARCH}/boot/dts/lite5200.dts"
-KERNEL_DEVICETREE_lsppchd = "arch/${ARCH}/boot/dts/kuroboxHD.dts"
-KERNEL_DEVICETREE_lsppchg = "arch/${ARCH}/boot/dts/kuroboxHG.dts"
-KERNEL_DEVICETREE_mpc8313e-rdb = "arch/${ARCH}/boot/dts/mpc8313erdb.dts"
-KERNEL_DEVICETREE_mpc8315e-rdb = "arch/${ARCH}/boot/dts/mpc8315erdb.dts"
-KERNEL_DEVICETREE_mpc8323e-rdb = "arch/${ARCH}/boot/dts/mpc832x_rdb.dts"
-KERNEL_DEVICETREE_mpc8544ds = "arch/${ARCH}/boot/dts/mpc8544ds.dts"
-KERNEL_DEVICETREE_mpc8641-hpcn = "arch/${ARCH}/boot/dts/mpc8641_hpcn.dts"
-KERNEL_DEVICETREE_p1020rdb = "arch/${ARCH}/boot/dts/p1020rdb.dts"
-KERNEL_DEVICETREE_p2020ds = "arch/${ARCH}/boot/dts/p2020ds.dts"
-KERNEL_DEVICETREE_sequoia = "arch/${ARCH}/boot/dts/sequoia.dts"
-KERNEL_DEVICETREE_tqm8540 = "arch/${ARCH}/boot/dts/tqm8540.dts"
-KERNEL_DEVICETREE_xilinx-ml507 = "arch/${ARCH}/boot/dts/virtex440-ml507.dts"
-
-KERNEL_DEVICETREE_FLAGS = "-R 8 -S 0x3000"
-
-CORTEXA8FIXUP ?= "yes"
-
-python __anonymous () {
-
-    import bb
-    
-    devicetree = bb.data.getVar('KERNEL_DEVICETREE', d, 1) or ''
-    if devicetree:
-    	depends = bb.data.getVar("DEPENDS", d, 1)
-    	bb.data.setVar("DEPENDS", "%s dtc-native" % depends, d)
-    	packages = bb.data.getVar("PACKAGES", d, 1)
-    	bb.data.setVar("PACKAGES", "%s kernel-devicetree" % packages, d)
+#kernel_conf_variable CMDLINE "\"${CMDLINE} ${CMDLINE_DEBUG}\""
+kernel_conf_variable() {
+    CONF_SED_SCRIPT="$CONF_SED_SCRIPT /CONFIG_$1[ =]/d;"
+    if test "$2" = "n"
+    then
+        echo "# CONFIG_$1 is not set" >> ${B}/.config
+    else
+        echo "CONFIG_$1=$2" >> ${B}/.config
+    fi
 }
 
 do_configure_prepend() {
+    echo "" > ${B}/.config
+    CONF_SED_SCRIPT=""
 
-        # Rename getline in ./scripts/unifdef.c
-        # Kernels up to 2.6.29 are currently failing to build unifdef.c,
-        # clashing with exposed getline() from <stdio.h>
-        # see https://patchwork.kernel.org/patch/11166/
-        # committed in 2.6.29 (commit d15bd1067b1fcb2b7250d22bc0c7c7fea0b759f7)
+    #
+    # logo support, if you supply logo_linux_clut224.ppm in SRC_URI, then it's going to be used
+    #
+    if [ -e ${WORKDIR}/logo_linux_clut224.ppm ]; then
+        install -m 0644 ${WORKDIR}/logo_linux_clut224.ppm drivers/video/logo/logo_linux_clut224.ppm
+        kernel_conf_variable LOGO y
+        kernel_conf_variable LOGO_LINUX_CLUT224 y
+    fi
 
-        sed -i -e 's/getline/parseline/g' ${S}/scripts/unifdef.c
+    #
+    # oabi / eabi support
+    #
+    kernel_conf_variable AEABI y
+    if [ "${ARM_KEEP_OABI}" = "1" ] ; then
+        kernel_conf_variable OABI_COMPAT y
+    else
+        kernel_conf_variable OABI_COMPAT n
+    fi
 
+    # When enabling thumb for userspace we also need thumb support in the kernel
+    if [ "${ARM_INSTRUCTION_SET}" = "thumb" ] ; then
+        kernel_conf_variable ARM_THUMB y
+    fi
 
-        echo "" > ${S}/.config
+    kernel_conf_variable CMDLINE "\"${CMDLINE} ${CMDLINE_DEBUG}\""
 
-        #
-        # logo support, if you supply logo_linux_clut224.ppm in SRC_URI, then it's going to be used
-        #
-        if [ -e ${WORKDIR}/${LOGO_SIZE}/logo_linux_clut224.ppm ]; then
-                install -m 0644 ${WORKDIR}/${LOGO_SIZE}/logo_linux_clut224.ppm drivers/video/logo/logo_linux_clut224.ppm
-                echo "CONFIG_LOGO=y"                    >> ${S}/.config
-                echo "CONFIG_LOGO_LINUX_CLUT224=y"      >> ${S}/.config
-        fi
+    kernel_conf_variable LOCALVERSION "\"${LOCALVERSION}\""
+    kernel_conf_variable LOCALVERSION_AUTO n
 
-        #
-        # oabi / eabi support
-        #
-        if [ "${TARGET_OS}" = "linux-gnueabi" -o  "${TARGET_OS}" = "linux-uclibceabi" ]; then
-                echo "CONFIG_AEABI=y"                   >> ${S}/.config
-                if [ "${ARM_KEEP_OABI}" = "1" ] ; then
-                        echo "CONFIG_OABI_COMPAT=y"             >> ${S}/.config
-                else
-                        echo "# CONFIG_OABI_COMPAT is not set"  >> ${S}/.config
-                fi
-        else
-                echo "# CONFIG_AEABI is not set"        >> ${S}/.config
-                echo "# CONFIG_OABI_COMPAT is not set"  >> ${S}/.config
-        fi
+    kernel_conf_variable SYSFS_DEPRECATED n
+    kernel_conf_variable SYSFS_DEPRECATED_V2 n
+    kernel_conf_variable HOTPLUG y
+    kernel_conf_variable UEVENT_HELPER_PATH \"\"
+    kernel_conf_variable UNIX y
+    kernel_conf_variable SYSFS y
+    kernel_conf_variable PROC_FS y
+    kernel_conf_variable TMPFS y
+    kernel_conf_variable INOTIFY_USER y
+    kernel_conf_variable SIGNALFD y
+    kernel_conf_variable TMPFS_POSIX_ACL y
+    kernel_conf_variable BLK_DEV_BSG y
+    kernel_conf_variable DEVTMPFS y
+    kernel_conf_variable DEVTMPFS_MOUNT y
 
-        # When enabling thumb for userspace we also need thumb support in the kernel
-        if [ "${ARM_INSTRUCTION_SET}" = "thumb" ] ; then
-            sed -i -e /CONFIG_ARM_THUMB/d ${WORKDIR}/defconfig 
-            echo "CONFIG_ARM_THUMB=y" >> ${S}/.config
-        fi
+    # Newer inits like systemd need cgroup support
+    if [ "${KERNEL_ENABLE_CGROUPS}" = "1" ] ; then
+        kernel_conf_variable CGROUP_SCHED y
+        kernel_conf_variable CGROUPS y
+        kernel_conf_variable CGROUP_NS y
+        kernel_conf_variable CGROUP_FREEZER y
+        kernel_conf_variable CGROUP_DEVICE y
+        kernel_conf_variable CPUSETS y
+        kernel_conf_variable PROC_PID_CPUSET y
+        kernel_conf_variable CGROUP_CPUACCT y
+        kernel_conf_variable RESOURCE_COUNTERS y
+    fi
 
-        # Enable thumb2 fixup for specific issue in angstrom toolchains when used on A8 r1p[012] silicon
-        if [ "${CORTEXA8FIXUP}" = "yes" ] ; then
-            sed -i -e /CONFIG_ARM_ERRATA_430973/d ${WORKDIR}/defconfig
-            echo "CONFIG_ARM_ERRATA_430973=y" >> ${S}/.config
-        fi
+    #
+    # root-over-nfs-over-usb-eth support. Limited, but should cover some cases.
+    # Enable this by setting a proper CMDLINE_NFSROOT_USB.
+    #
+    if [ ! -z "${CMDLINE_NFSROOT_USB}" ]; then
+        bbnote "Configuring the kernel for root-over-nfs-over-usb-eth with CMDLINE ${CMDLINE_NFSROOT_USB}"
+        kernel_conf_variable INET y
+        kernel_conf_variable IP_PNP y
+        kernel_conf_variable USB_GADGET y
+        kernel_conf_variable USB_GADGET_SELECTED y
+        kernel_conf_variable USB_ETH y
+        kernel_conf_variable NFS_FS y
+        kernel_conf_variable ROOT_NFS y
+        kernel_conf_variable CMDLINE \"${CMDLINE_NFSROOT_USB} ${CMDLINE_DEBUG}\"
+    fi
 
-	#
-	# endian support
-	#
-        if [ "${SITEINFO_ENDIANNESS}" = "be" ]; then
-                echo "CONFIG_CPU_BIG_ENDIAN=y"          >> ${S}/.config
-        fi
+    sed -e "${CONF_SED_SCRIPT}" \
+    < '${WORKDIR}/defconfig' >>'${B}/.config'
 
-        echo "CONFIG_CMDLINE=\"${CMDLINE}\"" >> ${S}/.config
-
-        sed -e '/CONFIG_AEABI/d' \
-            -e '/CONFIG_OABI_COMPAT=/d' \
-            -e '/CONFIG_CMDLINE=/d' \
-            -e '/CONFIG_CPU_BIG_ENDIAN/d' \
-            -e '/CONFIG_LOGO=/d' \
-            -e '/CONFIG_LOGO_LINUX_CLUT224=/d' \
-            -e '/CONFIG_LOCALVERSION/d' \
-            -e '/CONFIG_LOCALVERSION_AUTO/d' \
-	    < '${WORKDIR}/defconfig' >>'${S}/.config'
-
-        echo 'CONFIG_LOCALVERSION=""' >>${S}/.config
-        echo '# CONFIG_LOCALVERSION_AUTO is not set' >>${S}/.config
-
-        #
-        # Udev quirks
-        #
-
-        # Newer versions of udev mandate that sysfs doesn't have deprecated entries
-        if [ "${UDEV_GE_141}" = "1" ] ; then
-            sed -e /CONFIG_SYSFS_DEPRECATED/d \
-                -e /CONFIG_SYSFS_DEPRECATED_V2/d \
-                -e /CONFIG_HOTPLUG/d \
-                -e /CONFIG_UEVENT_HELPER_PATH/d \
-                -e /CONFIG_UNIX/d \
-                -e /CONFIG_SYSFS/d \
-                -e /CONFIG_PROC_FS/d \
-                -e /CONFIG_TMPFS/d \
-                -e /CONFIG_INOTIFY_USER/d \
-                -e /CONFIG_SIGNALFD/d \
-                -e /CONFIG_TMPFS_POSIX_ACL/d \
-                -e /CONFIG_BLK_DEV_BSG/d \
-                -i '${S}/.config'
-
-            echo '# CONFIG_SYSFS_DEPRECATED is not set' >> ${S}/.config
-            echo '# CONFIG_SYSFS_DEPRECATED_V2 is not set' >> ${S}/.config
-            echo 'CONFIG_HOTPLUG=y' >> ${S}/.config
-            echo 'CONFIG_UEVENT_HELPER_PATH=""' >> ${S}/.config
-            echo 'CONFIG_UNIX=y' >> ${S}/.config
-            echo 'CONFIG_SYSFS=y' >> ${S}/.config
-            echo 'CONFIG_PROC_FS=y' >> ${S}/.config
-            echo 'CONFIG_TMPFS=y' >> ${S}/.config
-            echo 'CONFIG_INOTIFY_USER=y' >> ${S}/.config
-            echo 'CONFIG_SIGNALFD=y' >> ${S}/.config
-            echo 'CONFIG_TMPFS_POSIX_ACL=y' >> ${S}/.config
-            echo 'CONFIG_BLK_DEV_BSG=y' >> ${S}/.config
-            echo 'CONFIG_DEVTMPFS=y' >> ${S}/.config
-            echo 'CONFIG_DEVTMPFS_MOUNT=y' >> ${S}/.config
-        fi
-
-        # Newer inits like systemd need cgroup support
-        if [ "${KERNEL_ENABLE_CGROUPS}" = "1" ] ; then
-            sed -e /CONFIG_CGROUP_SCHED/d \
-                -e /CONFIG_CGROUPS/d \
-                -i '${S}/.config'
-            
-            echo 'CONFIG_CGROUP_SCHED=y' >> ${S}/.config
-            echo 'CONFIG_CGROUPS=y' >> ${S}/.config
-            echo 'CONFIG_CGROUP_NS=y' >> ${S}/.config
-            echo 'CONFIG_CGROUP_FREEZER=y' >> ${S}/.config
-            echo 'CONFIG_CGROUP_DEVICE=y' >> ${S}/.config
-            echo 'CONFIG_CPUSETS=y' >> ${S}/.config
-            echo 'CONFIG_PROC_PID_CPUSET=y' >> ${S}/.config
-            echo 'CONFIG_CGROUP_CPUACCT=y' >> ${S}/.config
-            echo 'CONFIG_RESOURCE_COUNTERS=y' >> ${S}/.config
-        fi
-
-        #
-        # root-over-nfs-over-usb-eth support. Limited, but should cover some cases.
-        # Enable this by setting a proper CMDLINE_NFSROOT_USB.
-        #
-        if [ ! -z "${CMDLINE_NFSROOT_USB}" ]; then
-                oenote "Configuring the kernel for root-over-nfs-over-usb-eth with CMDLINE ${CMDLINE_NFSROOT_USB}"
-                sed -e '/CONFIG_INET/d' \
-                    -e '/CONFIG_IP_PNP=/d' \
-                    -e '/CONFIG_USB_GADGET=/d' \
-                    -e '/CONFIG_USB_GADGET_SELECTED=/d' \
-                    -e '/CONFIG_USB_ETH=/d' \
-                    -e '/CONFIG_NFS_FS=/d' \
-                    -e '/CONFIG_ROOT_NFS=/d' \
-                    -e '/CONFIG_CMDLINE=/d' \
-                    -i ${S}/.config
-                echo "CONFIG_INET=y"                     >> ${S}/.config
-                echo "CONFIG_IP_PNP=y"                   >> ${S}/.config
-                echo "CONFIG_USB_GADGET=y"               >> ${S}/.config
-                echo "CONFIG_USB_GADGET_SELECTED=y"      >> ${S}/.config
-                echo "CONFIG_USB_ETH=y"                  >> ${S}/.config
-                echo "CONFIG_NFS_FS=y"                   >> ${S}/.config
-                echo "CONFIG_ROOT_NFS=y"                 >> ${S}/.config
-                echo "CONFIG_CMDLINE=\"${CMDLINE_NFSROOT_USB}\"" >> ${S}/.config
-        fi
-		yes '' | oe_runmake oldconfig
+    yes '' | oe_runmake -C ${S} O=${B} oldconfig
 }
 
 do_configure_append() {
-        if test -e scripts/Makefile.fwinst ; then
-		sed -i -e "s:-m0644:-m 0644:g" scripts/Makefile.fwinst
-	fi
+    if test -e scripts/Makefile.fwinst ; then
+        sed -i -e "s:-m0644:-m 0644:g" scripts/Makefile.fwinst
+    fi
 }
 
-# bitbake.conf only prepends PARALLEL make in tasks called do_compile, which isn't the case for compile_modules
-# So explicitly enable it for that in here
-EXTRA_OEMAKE = "${PARALLEL_MAKE} "
-
 do_install_append() {
-	oe_runmake headers_install INSTALL_HDR_PATH=${D}${exec_prefix}/src/linux-${KERNEL_VERSION} ARCH=$ARCH
+    oe_runmake headers_install INSTALL_HDR_PATH=${D}${exec_prefix}/src/linux-${KERNEL_VERSION} ARCH=$ARCH
 }
 
 PACKAGES =+ "kernel-headers"
 FILES_kernel-headers = "${exec_prefix}/src/linux*"
-
-do_devicetree_image() {
-    if test -n "${KERNEL_DEVICETREE}" ; then
-        dtc -I dts -O dtb ${KERNEL_DEVICETREE_FLAGS} -o devicetree ${KERNEL_DEVICETREE}
-        install -d ${D}/boot
-        install -m 0644 devicetree ${D}/boot/devicetree-${KERNEL_VERSION}
-        install -d ${DEPLOY_DIR_IMAGE}
-        install -m 0644 devicetree ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGE_BASE_NAME}.dtb
-        package_stagefile_shell ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGE_BASE_NAME}.dtb
-        cd ${DEPLOY_DIR_IMAGE}
-        rm -f ${KERNEL_IMAGE_SYMLINK_NAME}.dtb
-        ln -sf ${KERNEL_IMAGE_BASE_NAME}.dtb ${KERNEL_IMAGE_SYMLINK_NAME}.dtb
-        package_stagefile_shell ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGE_SYMLINK_NAME}.dtb
-    fi
-}
-
-addtask devicetree_image after do_install before do_package do_deploy
-
-pkg_postinst_kernel-devicetree () {
-	cd /${KERNEL_IMAGEDEST}; update-alternatives --install /${KERNEL_IMAGEDEST}/devicetree devicetree devicetree-${KERNEL_VERSION} ${KERNEL_PRIORITY} || true
-}
-
-pkg_postrm_kernel-devicetree () {
-	cd /${KERNEL_IMAGEDEST}; update-alternatives --remove devicetree devicetree-${KERNEL_VERSION} || true
-}
-
-# Automatically depend on lzop-native if CONFIG_KERNEL_LZO is enabled
-python () {
-    try:
-        defconfig = bb.fetch2.localpath('file://defconfig', d)
-    except bb.fetch2.FetchError:
-        return
-
-    try:
-        configfile = open(defconfig)
-    except IOError:
-        return
-
-    if 'CONFIG_KERNEL_LZO=y\n' in configfile.readlines():
-        depends = d.getVar('DEPENDS', False)
-        d.setVar('DEPENDS', depends + ' lzop-native')
-}

recipes-kernel/linux/linux/0001-aufs3-kbuild.patch

@@ -1,37 +0,0 @@
-aufs3.0 kbuild patch
-
-diff --git a/fs/Kconfig b/fs/Kconfig
-index 19891aa..b660b64 100644
---- a/fs/Kconfig
-+++ b/fs/Kconfig
-@@ -208,5 +208,6 @@ source "fs/pstore/Kconfig"
- source "fs/sysv/Kconfig"
- source "fs/ufs/Kconfig"
- source "fs/exofs/Kconfig"
-+source "fs/aufs/Kconfig"
- 
- endif # MISC_FILESYSTEMS
-diff --git a/include/linux/Kbuild b/include/linux/Kbuild
-index 01f6362..8b3b9f1 100644
---- a/include/linux/Kbuild
-+++ b/include/linux/Kbuild
-@@ -65,6 +65,7 @@ header-y += atmppp.h
- header-y += atmsap.h
- header-y += atmsvc.h
- header-y += audit.h
-+header-y += aufs_type.h
- header-y += auto_fs.h
- header-y += auto_fs4.h
- header-y += auxvec.h
-diff --git a/fs/Makefile b/fs/Makefile
-index 2999b4d..60af3ce 100644
---- a/fs/Makefile
-+++ b/fs/Makefile
-@@ -124,6 +124,7 @@ obj-$(CONFIG_GFS2_FS)           += gfs2/
- obj-$(CONFIG_EXOFS_FS)          += exofs/
- obj-$(CONFIG_CEPH_FS)		+= ceph/
- obj-$(CONFIG_PSTORE)		+= pstore/
-+obj-$(CONFIG_AUFS_FS)           += aufs/
- 
- # Patched by YAFFS
- obj-$(CONFIG_YAFFS_FS)		+= yaffs2/

recipes-kernel/linux/linux/0002-aufs3-base.patch

@@ -1,70 +0,0 @@
-aufs3.0 base patch
-
-diff --git a/fs/namei.c b/fs/namei.c
-index 14ab8d3..eb4aef1 100644
---- a/fs/namei.c
-+++ b/fs/namei.c
-@@ -1697,7 +1697,7 @@ static struct dentry *__lookup_hash(struct qstr *name,
-  * needs parent already locked. Doesn't follow mounts.
-  * SMP-safe.
-  */
--static struct dentry *lookup_hash(struct nameidata *nd)
-+struct dentry *lookup_hash(struct nameidata *nd)
- {
- 	return __lookup_hash(&nd->last, nd->path.dentry, nd);
- }
-diff --git a/fs/splice.c b/fs/splice.c
-index aa866d3..19afec6 100644
---- a/fs/splice.c
-+++ b/fs/splice.c
-@@ -1085,8 +1085,8 @@ EXPORT_SYMBOL(generic_splice_sendpage);
- /*
-  * Attempt to initiate a splice from pipe to file.
-  */
--static long do_splice_from(struct pipe_inode_info *pipe, struct file *out,
--			   loff_t *ppos, size_t len, unsigned int flags)
-+long do_splice_from(struct pipe_inode_info *pipe, struct file *out,
-+		    loff_t *ppos, size_t len, unsigned int flags)
- {
- 	ssize_t (*splice_write)(struct pipe_inode_info *, struct file *,
- 				loff_t *, size_t, unsigned int);
-@@ -1113,9 +1113,9 @@ static long do_splice_from(struct pipe_inode_info *pipe, struct file *out,
- /*
-  * Attempt to initiate a splice from a file to a pipe.
-  */
--static long do_splice_to(struct file *in, loff_t *ppos,
--			 struct pipe_inode_info *pipe, size_t len,
--			 unsigned int flags)
-+long do_splice_to(struct file *in, loff_t *ppos,
-+		  struct pipe_inode_info *pipe, size_t len,
-+		  unsigned int flags)
- {
- 	ssize_t (*splice_read)(struct file *, loff_t *,
- 			       struct pipe_inode_info *, size_t, unsigned int);
-diff --git a/include/linux/namei.h b/include/linux/namei.h
-index eba45ea..21ed6c9 100644
---- a/include/linux/namei.h
-+++ b/include/linux/namei.h
-@@ -82,6 +82,7 @@ extern int vfs_path_lookup(struct dentry *, struct vfsmount *,
- extern struct file *lookup_instantiate_filp(struct nameidata *nd, struct dentry *dentry,
- 		int (*open)(struct inode *, struct file *));
- 
-+extern struct dentry *lookup_hash(struct nameidata *nd);
- extern struct dentry *lookup_one_len(const char *, struct dentry *, int);
- 
- extern int follow_down_one(struct path *);
-diff --git a/include/linux/splice.h b/include/linux/splice.h
-index 997c3b4..be9a153 100644
---- a/include/linux/splice.h
-+++ b/include/linux/splice.h
-@@ -89,4 +89,10 @@ extern int splice_grow_spd(struct pipe_inode_info *, struct splice_pipe_desc *);
- extern void splice_shrink_spd(struct pipe_inode_info *,
- 				struct splice_pipe_desc *);
- 
-+extern long do_splice_from(struct pipe_inode_info *pipe, struct file *out,
-+			   loff_t *ppos, size_t len, unsigned int flags);
-+extern long do_splice_to(struct file *in, loff_t *ppos,
-+			 struct pipe_inode_info *pipe, size_t len,
-+			 unsigned int flags);
-+
- #endif

recipes-kernel/linux/linux/0003-aufs3-proc_map.patch

@@ -1,205 +0,0 @@
-aufs3.0 proc_map patch
-
-diff --git a/fs/proc/nommu.c b/fs/proc/nommu.c
-index b1822dd..8b29ab7 100644
---- a/fs/proc/nommu.c
-+++ b/fs/proc/nommu.c
-@@ -46,6 +46,10 @@ static int nommu_region_show(struct seq_file *m, struct vm_region *region)
- 
- 	if (file) {
- 		struct inode *inode = region->vm_file->f_path.dentry->d_inode;
-+		if (region->vm_prfile) {
-+			file = region->vm_prfile;
-+			inode = file->f_path.dentry->d_inode;
-+		}
- 		dev = inode->i_sb->s_dev;
- 		ino = inode->i_ino;
- 	}
-diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
-index 25b6a88..47ed5d8 100644
---- a/fs/proc/task_mmu.c
-+++ b/fs/proc/task_mmu.c
-@@ -220,6 +220,10 @@ static void show_map_vma(struct seq_file *m, struct vm_area_struct *vma)
- 
- 	if (file) {
- 		struct inode *inode = vma->vm_file->f_path.dentry->d_inode;
-+		if (vma->vm_prfile) {
-+			file = vma->vm_prfile;
-+			inode = file->f_path.dentry->d_inode;
-+		}
- 		dev = inode->i_sb->s_dev;
- 		ino = inode->i_ino;
- 		pgoff = ((loff_t)vma->vm_pgoff) << PAGE_SHIFT;
-@@ -1001,6 +1005,8 @@ static int show_numa_map(struct seq_file *m, void *v)
- 
- 	if (file) {
- 		seq_printf(m, " file=");
-+		if (vma->vm_prfile)
-+			file = vma->vm_prfile;
- 		seq_path(m, &file->f_path, "\n\t= ");
- 	} else if (vma->vm_start <= mm->brk && vma->vm_end >= mm->start_brk) {
- 		seq_printf(m, " heap");
-diff --git a/fs/proc/task_nommu.c b/fs/proc/task_nommu.c
-index 980de54..4ee031f 100644
---- a/fs/proc/task_nommu.c
-+++ b/fs/proc/task_nommu.c
-@@ -148,6 +148,10 @@ static int nommu_vma_show(struct seq_file *m, struct vm_area_struct *vma)
- 
- 	if (file) {
- 		struct inode *inode = vma->vm_file->f_path.dentry->d_inode;
-+		if (vma->vm_prfile) {
-+			file = vma->vm_prfile;
-+			inode = file->f_path.dentry->d_inode;
-+		}
- 		dev = inode->i_sb->s_dev;
- 		ino = inode->i_ino;
- 		pgoff = (loff_t)vma->vm_pgoff << PAGE_SHIFT;
-diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h
-index 027935c..0ade381 100644
---- a/include/linux/mm_types.h
-+++ b/include/linux/mm_types.h
-@@ -117,6 +117,7 @@ struct vm_region {
- 	unsigned long	vm_top;		/* region allocated to here */
- 	unsigned long	vm_pgoff;	/* the offset in vm_file corresponding to vm_start */
- 	struct file	*vm_file;	/* the backing file or NULL */
-+	struct file	*vm_prfile;	/* the virtual backing file or NULL */
- 
- 	int		vm_usage;	/* region usage count (access under nommu_region_sem) */
- 	bool		vm_icache_flushed : 1; /* true if the icache has been flushed for
-@@ -176,6 +177,7 @@ struct vm_area_struct {
- 	unsigned long vm_pgoff;		/* Offset (within vm_file) in PAGE_SIZE
- 					   units, *not* PAGE_CACHE_SIZE */
- 	struct file * vm_file;		/* File we map to (can be NULL). */
-+	struct file *vm_prfile;		/* shadow of vm_file */
- 	void * vm_private_data;		/* was vm_pte (shared mem) */
- 
- #ifndef CONFIG_MMU
-diff --git a/kernel/fork.c b/kernel/fork.c
-index 0276c30..39d8176 100644
---- a/kernel/fork.c
-+++ b/kernel/fork.c
-@@ -380,6 +380,8 @@ static int dup_mmap(struct mm_struct *mm, struct mm_struct *oldmm)
- 			struct address_space *mapping = file->f_mapping;
- 
- 			get_file(file);
-+			if (tmp->vm_prfile)
-+				get_file(tmp->vm_prfile);
- 			if (tmp->vm_flags & VM_DENYWRITE)
- 				atomic_dec(&inode->i_writecount);
- 			mutex_lock(&mapping->i_mmap_mutex);
-diff --git a/mm/memory.c b/mm/memory.c
-index 9b8a01d..8902d06 100644
---- a/mm/memory.c
-+++ b/mm/memory.c
-@@ -2577,6 +2577,8 @@ reuse:
- 		/* file_update_time outside page_lock */
- 		if (vma->vm_file)
- 			file_update_time(vma->vm_file);
-+		if (vma->vm_prfile)
-+			file_update_time(vma->vm_prfile);
- 
- 		return ret;
- 	}
-@@ -3257,6 +3259,8 @@ out:
- 		/* file_update_time outside page_lock */
- 		if (vma->vm_file)
- 			file_update_time(vma->vm_file);
-+		if (vma->vm_prfile)
-+			file_update_time(vma->vm_prfile);
- 	} else {
- 		unlock_page(vmf.page);
- 		if (anon)
-diff --git a/mm/mmap.c b/mm/mmap.c
-index d49736f..0290c8e 100644
---- a/mm/mmap.c
-+++ b/mm/mmap.c
-@@ -240,6 +240,8 @@ static struct vm_area_struct *remove_vma(struct vm_area_struct *vma)
- 		vma->vm_ops->close(vma);
- 	if (vma->vm_file) {
- 		fput(vma->vm_file);
-+		if (vma->vm_prfile)
-+			fput(vma->vm_prfile);
- 		if (vma->vm_flags & VM_EXECUTABLE)
- 			removed_exe_file_vma(vma->vm_mm);
- 	}
-@@ -627,6 +629,8 @@ again:			remove_next = 1 + (end > next->vm_end);
- 	if (remove_next) {
- 		if (file) {
- 			fput(file);
-+			if (vma->vm_prfile)
-+				fput(vma->vm_prfile);
- 			if (next->vm_flags & VM_EXECUTABLE)
- 				removed_exe_file_vma(mm);
- 		}
-@@ -1973,6 +1977,8 @@ static int __split_vma(struct mm_struct * mm, struct vm_area_struct * vma,
- 
- 	if (new->vm_file) {
- 		get_file(new->vm_file);
-+		if (new->vm_prfile)
-+			get_file(new->vm_prfile);
- 		if (vma->vm_flags & VM_EXECUTABLE)
- 			added_exe_file_vma(mm);
- 	}
-@@ -1997,6 +2003,8 @@ static int __split_vma(struct mm_struct * mm, struct vm_area_struct * vma,
- 		if (vma->vm_flags & VM_EXECUTABLE)
- 			removed_exe_file_vma(mm);
- 		fput(new->vm_file);
-+		if (new->vm_prfile)
-+			fput(new->vm_prfile);
- 	}
- 	unlink_anon_vmas(new);
-  out_free_mpol:
-@@ -2364,6 +2372,8 @@ struct vm_area_struct *copy_vma(struct vm_area_struct **vmap,
- 			new_vma->vm_pgoff = pgoff;
- 			if (new_vma->vm_file) {
- 				get_file(new_vma->vm_file);
-+				if (new_vma->vm_prfile)
-+					get_file(new_vma->vm_prfile);
- 				if (vma->vm_flags & VM_EXECUTABLE)
- 					added_exe_file_vma(mm);
- 			}
-diff --git a/mm/nommu.c b/mm/nommu.c
-index 9edc897..72631ebe 100644
---- a/mm/nommu.c
-+++ b/mm/nommu.c
-@@ -634,6 +634,8 @@ static void __put_nommu_region(struct vm_region *region)
- 
- 		if (region->vm_file)
- 			fput(region->vm_file);
-+		if (region->vm_prfile)
-+			fput(region->vm_prfile);
- 
- 		/* IO memory and memory shared directly out of the pagecache
- 		 * from ramfs/tmpfs mustn't be released here */
-@@ -790,6 +792,8 @@ static void delete_vma(struct mm_struct *mm, struct vm_area_struct *vma)
- 		vma->vm_ops->close(vma);
- 	if (vma->vm_file) {
- 		fput(vma->vm_file);
-+		if (vma->vm_prfile)
-+			fput(vma->vm_prfile);
- 		if (vma->vm_flags & VM_EXECUTABLE)
- 			removed_exe_file_vma(mm);
- 	}
-@@ -1363,6 +1367,8 @@ unsigned long do_mmap_pgoff(struct file *file,
- 				}
- 			}
- 			fput(region->vm_file);
-+			if (region->vm_prfile)
-+				fput(region->vm_prfile);
- 			kmem_cache_free(vm_region_jar, region);
- 			region = pregion;
- 			result = start;
-@@ -1439,9 +1445,13 @@ error_just_free:
- error:
- 	if (region->vm_file)
- 		fput(region->vm_file);
-+	if (region->vm_prfile)
-+		fput(region->vm_prfile);
- 	kmem_cache_free(vm_region_jar, region);
- 	if (vma->vm_file)
- 		fput(vma->vm_file);
-+	if (vma->vm_prfile)
-+		fput(vma->vm_prfile);
- 	if (vma->vm_flags & VM_EXECUTABLE)
- 		removed_exe_file_vma(vma->vm_mm);
- 	kmem_cache_free(vm_area_cachep, vma);

recipes-kernel/linux/linux/0004-aufs3-standalone.patch

@@ -1,257 +0,0 @@
-aufs3.0 standalone patch
-
-diff --git a/fs/file_table.c b/fs/file_table.c
-index 01e4c1e..0e800e2 100644
---- a/fs/file_table.c
-+++ b/fs/file_table.c
-@@ -443,6 +443,8 @@ void file_sb_list_del(struct file *file)
- 	}
- }
- 
-+EXPORT_SYMBOL(file_sb_list_del);
-+
- #ifdef CONFIG_SMP
- 
- /*
-diff --git a/fs/inode.c b/fs/inode.c
-index 43566d1..4291eae 100644
---- a/fs/inode.c
-+++ b/fs/inode.c
-@@ -69,6 +69,7 @@ static DEFINE_SPINLOCK(inode_lru_lock);
- 
- __cacheline_aligned_in_smp DEFINE_SPINLOCK(inode_sb_list_lock);
- __cacheline_aligned_in_smp DEFINE_SPINLOCK(inode_wb_list_lock);
-+EXPORT_SYMBOL(inode_sb_list_lock);
- 
- /*
-  * iprune_sem provides exclusion between the icache shrinking and the
-diff --git a/fs/namei.c b/fs/namei.c
-index eb4aef1..66d04c6 100644
---- a/fs/namei.c
-+++ b/fs/namei.c
-@@ -365,6 +365,7 @@ int deny_write_access(struct file * file)
- 
- 	return 0;
- }
-+EXPORT_SYMBOL(deny_write_access);
- 
- /**
-  * path_get - get a reference to a path
-@@ -1701,6 +1702,7 @@ struct dentry *lookup_hash(struct nameidata *nd)
- {
- 	return __lookup_hash(&nd->last, nd->path.dentry, nd);
- }
-+EXPORT_SYMBOL(lookup_hash);
- 
- /**
-  * lookup_one_len - filesystem helper to lookup single pathname component
-diff --git a/fs/namespace.c b/fs/namespace.c
-index fe59bd1..7d3843f 100644
---- a/fs/namespace.c
-+++ b/fs/namespace.c
-@@ -1508,6 +1508,7 @@ int iterate_mounts(int (*f)(struct vfsmount *, void *), void *arg,
- 	}
- 	return 0;
- }
-+EXPORT_SYMBOL(iterate_mounts);
- 
- static void cleanup_group_ids(struct vfsmount *mnt, struct vfsmount *end)
- {
-diff --git a/fs/notify/group.c b/fs/notify/group.c
-index d309f38..f0e9568 100644
---- a/fs/notify/group.c
-+++ b/fs/notify/group.c
-@@ -22,6 +22,7 @@
- #include <linux/srcu.h>
- #include <linux/rculist.h>
- #include <linux/wait.h>
-+#include <linux/module.h>
- 
- #include <linux/fsnotify_backend.h>
- #include "fsnotify.h"
-@@ -70,6 +71,7 @@ void fsnotify_put_group(struct fsnotify_group *group)
- 	if (atomic_dec_and_test(&group->refcnt))
- 		fsnotify_destroy_group(group);
- }
-+EXPORT_SYMBOL(fsnotify_put_group);
- 
- /*
-  * Create a new fsnotify_group and hold a reference for the group returned.
-@@ -102,3 +104,4 @@ struct fsnotify_group *fsnotify_alloc_group(const struct fsnotify_ops *ops)
- 
- 	return group;
- }
-+EXPORT_SYMBOL(fsnotify_alloc_group);
-diff --git a/fs/notify/mark.c b/fs/notify/mark.c
-index 252ab1f..2199b9b 100644
---- a/fs/notify/mark.c
-+++ b/fs/notify/mark.c
-@@ -112,6 +112,7 @@ void fsnotify_put_mark(struct fsnotify_mark *mark)
- 	if (atomic_dec_and_test(&mark->refcnt))
- 		mark->free_mark(mark);
- }
-+EXPORT_SYMBOL(fsnotify_put_mark);
- 
- /*
-  * Any time a mark is getting freed we end up here.
-@@ -189,6 +190,7 @@ void fsnotify_destroy_mark(struct fsnotify_mark *mark)
- 	if (unlikely(atomic_dec_and_test(&group->num_marks)))
- 		fsnotify_final_destroy_group(group);
- }
-+EXPORT_SYMBOL(fsnotify_destroy_mark);
- 
- void fsnotify_set_mark_mask_locked(struct fsnotify_mark *mark, __u32 mask)
- {
-@@ -276,6 +278,7 @@ err:
- 
- 	return ret;
- }
-+EXPORT_SYMBOL(fsnotify_add_mark);
- 
- /*
-  * clear any marks in a group in which mark->flags & flags is true
-@@ -331,6 +334,7 @@ void fsnotify_init_mark(struct fsnotify_mark *mark,
- 	atomic_set(&mark->refcnt, 1);
- 	mark->free_mark = free_mark;
- }
-+EXPORT_SYMBOL(fsnotify_init_mark);
- 
- static int fsnotify_mark_destroy(void *ignored)
- {
-diff --git a/fs/open.c b/fs/open.c
-index b52cf01..c1b341c 100644
---- a/fs/open.c
-+++ b/fs/open.c
-@@ -60,6 +60,7 @@ int do_truncate(struct dentry *dentry, loff_t length, unsigned int time_attrs,
- 	mutex_unlock(&dentry->d_inode->i_mutex);
- 	return ret;
- }
-+EXPORT_SYMBOL(do_truncate);
- 
- static long do_sys_truncate(const char __user *pathname, loff_t length)
- {
-diff --git a/fs/splice.c b/fs/splice.c
-index 19afec6..11f07f86 100644
---- a/fs/splice.c
-+++ b/fs/splice.c
-@@ -1109,6 +1109,7 @@ long do_splice_from(struct pipe_inode_info *pipe, struct file *out,
- 
- 	return splice_write(pipe, out, ppos, len, flags);
- }
-+EXPORT_SYMBOL(do_splice_from);
- 
- /*
-  * Attempt to initiate a splice from a file to a pipe.
-@@ -1135,6 +1136,7 @@ long do_splice_to(struct file *in, loff_t *ppos,
- 
- 	return splice_read(in, ppos, pipe, len, flags);
- }
-+EXPORT_SYMBOL(do_splice_to);
- 
- /**
-  * splice_direct_to_actor - splices data directly between two non-pipes
-diff --git a/security/commoncap.c b/security/commoncap.c
-index a93b3b7..024282c 100644
---- a/security/commoncap.c
-+++ b/security/commoncap.c
-@@ -971,3 +971,4 @@ int cap_file_mmap(struct file *file, unsigned long reqprot,
- 	}
- 	return ret;
- }
-+EXPORT_SYMBOL(cap_file_mmap);
-diff --git a/security/device_cgroup.c b/security/device_cgroup.c
-index 1be6826..215278c 100644
---- a/security/device_cgroup.c
-+++ b/security/device_cgroup.c
-@@ -508,6 +508,7 @@ found:
- 
- 	return -EPERM;
- }
-+EXPORT_SYMBOL(__devcgroup_inode_permission);
- 
- int devcgroup_inode_mknod(int mode, dev_t dev)
- {
-diff --git a/security/security.c b/security/security.c
-index 4ba6d4c..9f64bb8 100644
---- a/security/security.c
-+++ b/security/security.c
-@@ -373,6 +373,7 @@ int security_path_rmdir(struct path *dir, struct dentry *dentry)
- 		return 0;
- 	return security_ops->path_rmdir(dir, dentry);
- }
-+EXPORT_SYMBOL(security_path_rmdir);
- 
- int security_path_unlink(struct path *dir, struct dentry *dentry)
- {
-@@ -389,6 +390,7 @@ int security_path_symlink(struct path *dir, struct dentry *dentry,
- 		return 0;
- 	return security_ops->path_symlink(dir, dentry, old_name);
- }
-+EXPORT_SYMBOL(security_path_symlink);
- 
- int security_path_link(struct dentry *old_dentry, struct path *new_dir,
- 		       struct dentry *new_dentry)
-@@ -397,6 +399,7 @@ int security_path_link(struct dentry *old_dentry, struct path *new_dir,
- 		return 0;
- 	return security_ops->path_link(old_dentry, new_dir, new_dentry);
- }
-+EXPORT_SYMBOL(security_path_link);
- 
- int security_path_rename(struct path *old_dir, struct dentry *old_dentry,
- 			 struct path *new_dir, struct dentry *new_dentry)
-@@ -415,6 +418,7 @@ int security_path_truncate(struct path *path)
- 		return 0;
- 	return security_ops->path_truncate(path);
- }
-+EXPORT_SYMBOL(security_path_truncate);
- 
- int security_path_chmod(struct dentry *dentry, struct vfsmount *mnt,
- 			mode_t mode)
-@@ -423,6 +427,7 @@ int security_path_chmod(struct dentry *dentry, struct vfsmount *mnt,
- 		return 0;
- 	return security_ops->path_chmod(dentry, mnt, mode);
- }
-+EXPORT_SYMBOL(security_path_chmod);
- 
- int security_path_chown(struct path *path, uid_t uid, gid_t gid)
- {
-@@ -430,6 +435,7 @@ int security_path_chown(struct path *path, uid_t uid, gid_t gid)
- 		return 0;
- 	return security_ops->path_chown(path, uid, gid);
- }
-+EXPORT_SYMBOL(security_path_chown);
- 
- int security_path_chroot(struct path *path)
- {
-@@ -506,6 +512,7 @@ int security_inode_readlink(struct dentry *dentry)
- 		return 0;
- 	return security_ops->inode_readlink(dentry);
- }
-+EXPORT_SYMBOL(security_inode_readlink);
- 
- int security_inode_follow_link(struct dentry *dentry, struct nameidata *nd)
- {
-@@ -520,6 +527,7 @@ int security_inode_permission(struct inode *inode, int mask)
- 		return 0;
- 	return security_ops->inode_permission(inode, mask, 0);
- }
-+EXPORT_SYMBOL(security_inode_permission);
- 
- int security_inode_exec_permission(struct inode *inode, unsigned int flags)
- {
-@@ -626,6 +634,7 @@ int security_file_permission(struct file *file, int mask)
- 
- 	return fsnotify_perm(file, mask);
- }
-+EXPORT_SYMBOL(security_file_permission);
- 
- int security_file_alloc(struct file *file)
- {
-@@ -653,6 +662,7 @@ int security_file_mmap(struct file *file, unsigned long reqprot,
- 		return ret;
- 	return ima_file_mmap(file, prot);
- }
-+EXPORT_SYMBOL(security_file_mmap);
- 
- int security_file_mprotect(struct vm_area_struct *vma, unsigned long reqprot,
- 			    unsigned long prot)

recipes-kernel/linux/linux/aufs_type.h

@@ -1,233 +0,0 @@
-/*
- * Copyright (C) 2005-2012 Junjiro R. Okajima
- *
- * This program, aufs is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-#ifndef __AUFS_TYPE_H__
-#define __AUFS_TYPE_H__
-
-#define AUFS_NAME	"aufs"
-
-#ifdef __KERNEL__
-/*
- * define it before including all other headers.
- * sched.h may use pr_* macros before defining "current", so define the
- * no-current version first, and re-define later.
- */
-#define pr_fmt(fmt)	AUFS_NAME " %s:%d: " fmt, __func__, __LINE__
-#include <linux/sched.h>
-#undef pr_fmt
-#define pr_fmt(fmt)	AUFS_NAME " %s:%d:%s[%d]: " fmt, \
-		__func__, __LINE__, current->comm, current->pid
-#else
-#include <stdint.h>
-#include <sys/types.h>
-#endif /* __KERNEL__ */
-
-#include <linux/limits.h>
-
-#define AUFS_VERSION	"3.0-20120827"
-
-/* todo? move this to linux-2.6.19/include/magic.h */
-#define AUFS_SUPER_MAGIC	('a' << 24 | 'u' << 16 | 'f' << 8 | 's')
-
-/* ---------------------------------------------------------------------- */
-
-#ifdef CONFIG_AUFS_BRANCH_MAX_127
-typedef int8_t aufs_bindex_t;
-#define AUFS_BRANCH_MAX 127
-#else
-typedef int16_t aufs_bindex_t;
-#ifdef CONFIG_AUFS_BRANCH_MAX_511
-#define AUFS_BRANCH_MAX 511
-#elif defined(CONFIG_AUFS_BRANCH_MAX_1023)
-#define AUFS_BRANCH_MAX 1023
-#elif defined(CONFIG_AUFS_BRANCH_MAX_32767)
-#define AUFS_BRANCH_MAX 32767
-#endif
-#endif
-
-#ifdef __KERNEL__
-#ifndef AUFS_BRANCH_MAX
-#error unknown CONFIG_AUFS_BRANCH_MAX value
-#endif
-#endif /* __KERNEL__ */
-
-/* ---------------------------------------------------------------------- */
-
-#define AUFS_FSTYPE		AUFS_NAME
-
-#define AUFS_ROOT_INO		2
-#define AUFS_FIRST_INO		11
-
-#define AUFS_WH_PFX		".wh."
-#define AUFS_WH_PFX_LEN		((int)sizeof(AUFS_WH_PFX) - 1)
-#define AUFS_WH_TMP_LEN		4
-/* a limit for rmdir/rename a dir */
-#define AUFS_MAX_NAMELEN	(NAME_MAX \
-				- AUFS_WH_PFX_LEN * 2	/* doubly whiteouted */\
-				- 1			/* dot */\
-				- AUFS_WH_TMP_LEN)	/* hex */
-#define AUFS_XINO_FNAME		"." AUFS_NAME ".xino"
-#define AUFS_XINO_DEFPATH	"/tmp/" AUFS_XINO_FNAME
-#define AUFS_XINO_TRUNC_INIT	64 /* blocks */
-#define AUFS_XINO_TRUNC_STEP	4  /* blocks */
-#define AUFS_DIRWH_DEF		3
-#define AUFS_RDCACHE_DEF	10 /* seconds */
-#define AUFS_RDCACHE_MAX	3600 /* seconds */
-#define AUFS_RDBLK_DEF		512 /* bytes */
-#define AUFS_RDHASH_DEF		32
-#define AUFS_WKQ_NAME		AUFS_NAME "d"
-#define AUFS_MFS_DEF_SEC	30 /* seconds */
-#define AUFS_MFS_MAX_SEC	3600 /* seconds */
-#define AUFS_PLINK_WARN		100 /* number of plinks */
-
-/* pseudo-link maintenace under /proc */
-#define AUFS_PLINK_MAINT_NAME	"plink_maint"
-#define AUFS_PLINK_MAINT_DIR	"fs/" AUFS_NAME
-#define AUFS_PLINK_MAINT_PATH	AUFS_PLINK_MAINT_DIR "/" AUFS_PLINK_MAINT_NAME
-
-#define AUFS_DIROPQ_NAME	AUFS_WH_PFX ".opq" /* whiteouted doubly */
-#define AUFS_WH_DIROPQ		AUFS_WH_PFX AUFS_DIROPQ_NAME
-
-#define AUFS_BASE_NAME		AUFS_WH_PFX AUFS_NAME
-#define AUFS_PLINKDIR_NAME	AUFS_WH_PFX "plnk"
-#define AUFS_ORPHDIR_NAME	AUFS_WH_PFX "orph"
-
-/* doubly whiteouted */
-#define AUFS_WH_BASE		AUFS_WH_PFX AUFS_BASE_NAME
-#define AUFS_WH_PLINKDIR	AUFS_WH_PFX AUFS_PLINKDIR_NAME
-#define AUFS_WH_ORPHDIR		AUFS_WH_PFX AUFS_ORPHDIR_NAME
-
-/* branch permissions and attributes */
-#define AUFS_BRPERM_RW		"rw"
-#define AUFS_BRPERM_RO		"ro"
-#define AUFS_BRPERM_RR		"rr"
-#define AUFS_BRRATTR_WH		"wh"
-#define AUFS_BRWATTR_NLWH	"nolwh"
-
-/* ---------------------------------------------------------------------- */
-
-/* ioctl */
-enum {
-	/* readdir in userspace */
-	AuCtl_RDU,
-	AuCtl_RDU_INO,
-
-	/* pathconf wrapper */
-	AuCtl_WBR_FD,
-
-	/* busy inode */
-	AuCtl_IBUSY
-};
-
-/* borrowed from linux/include/linux/kernel.h */
-#ifndef ALIGN
-#define ALIGN(x, a)		__ALIGN_MASK(x, (typeof(x))(a)-1)
-#define __ALIGN_MASK(x, mask)	(((x)+(mask))&~(mask))
-#endif
-
-/* borrowed from linux/include/linux/compiler-gcc3.h */
-#ifndef __aligned
-#define __aligned(x)			__attribute__((aligned(x)))
-#endif
-
-#ifdef __KERNEL__
-#ifndef __packed
-#define __packed			__attribute__((packed))
-#endif
-#endif
-
-struct au_rdu_cookie {
-	uint64_t	h_pos;
-	int16_t		bindex;
-	uint8_t		flags;
-	uint8_t		pad;
-	uint32_t	generation;
-} __aligned(8);
-
-struct au_rdu_ent {
-	uint64_t	ino;
-	int16_t		bindex;
-	uint8_t		type;
-	uint8_t		nlen;
-	uint8_t		wh;
-	char		name[0];
-} __aligned(8);
-
-static inline int au_rdu_len(int nlen)
-{
-	/* include the terminating NULL */
-	return ALIGN(sizeof(struct au_rdu_ent) + nlen + 1,
-		     sizeof(uint64_t));
-}
-
-union au_rdu_ent_ul {
-	struct au_rdu_ent __user	*e;
-	uint64_t			ul;
-};
-
-enum {
-	AufsCtlRduV_SZ,
-	AufsCtlRduV_End
-};
-
-struct aufs_rdu {
-	/* input */
-	union {
-		uint64_t	sz;	/* AuCtl_RDU */
-		uint64_t	nent;	/* AuCtl_RDU_INO */
-	};
-	union au_rdu_ent_ul	ent;
-	uint16_t		verify[AufsCtlRduV_End];
-
-	/* input/output */
-	uint32_t		blk;
-
-	/* output */
-	union au_rdu_ent_ul	tail;
-	/* number of entries which were added in a single call */
-	uint64_t		rent;
-	uint8_t			full;
-	uint8_t			shwh;
-
-	struct au_rdu_cookie	cookie;
-} __aligned(8);
-
-/* ---------------------------------------------------------------------- */
-
-struct aufs_wbr_fd {
-	uint32_t	oflags;
-	int16_t		brid;
-} __aligned(8);
-
-/* ---------------------------------------------------------------------- */
-
-struct aufs_ibusy {
-	uint64_t	ino, h_ino;
-	int16_t		bindex;
-} __aligned(8);
-
-/* ---------------------------------------------------------------------- */
-
-#define AuCtlType		'A'
-#define AUFS_CTL_RDU		_IOWR(AuCtlType, AuCtl_RDU, struct aufs_rdu)
-#define AUFS_CTL_RDU_INO	_IOWR(AuCtlType, AuCtl_RDU_INO, struct aufs_rdu)
-#define AUFS_CTL_WBR_FD		_IOW(AuCtlType, AuCtl_WBR_FD, \
-				     struct aufs_wbr_fd)
-#define AUFS_CTL_IBUSY		_IOWR(AuCtlType, AuCtl_IBUSY, struct aufs_ibusy)
-
-#endif /* __AUFS_TYPE_H__ */

recipes-kernel/linux/linux/defconfig

@@ -0,0 +1,749 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CGROUPS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_PERF_EVENTS=y
+CONFIG_MODULES=y
+CONFIG_BLK_DEV_BSGLIB=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
+CONFIG_LDM_PARTITION=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=8
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_HIGHPTE=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPU_IDLE=y
+CONFIG_ARM_CPUIDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_KERNEL_MODE_NEON=y
+CONFIG_HIBERNATION=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=m
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_FIB_TRIE_STATS=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_FOU=m
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+CONFIG_TCP_CONG_DCTCP=m
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_IPV6_VTI=m
+CONFIG_IPV6_GRE=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CONNTRACK_TIMEOUT=y
+CONFIG_NF_CONNTRACK_TIMESTAMP=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NF_CT_NETLINK_HELPER=m
+CONFIG_NETFILTER_NETLINK_QUEUE_CT=y
+CONFIG_NF_TABLES=m
+CONFIG_NF_TABLES_INET=m
+CONFIG_NFT_EXTHDR=m
+CONFIG_NFT_META=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_RBTREE=m
+CONFIG_NFT_HASH=m
+CONFIG_NFT_COUNTER=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_MASQ=m
+CONFIG_NFT_REDIR=m
+CONFIG_NFT_NAT=m
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_COMPAT=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CGROUP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+CONFIG_IP_VS_DEBUG=y
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_FO=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_PE_SIP=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NF_TABLES_ARP=m
+CONFIG_NF_LOG_ARP=m
+CONFIG_NFT_CHAIN_NAT_IPV4=m
+CONFIG_NFT_MASQ_IPV4=m
+CONFIG_NFT_REDIR_IPV4=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_SYNPROXY=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_CHAIN_NAT_IPV6=m
+CONFIG_NFT_MASQ_IPV6=m
+CONFIG_NFT_REDIR_IPV6=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_SYNPROXY=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_NAT=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_L2TP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_VLAN_FILTERING=y
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_VLAN_8021Q_MVRP=y
+CONFIG_6LOWPAN=m
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_MAC802154=m
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=y
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=y
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_CODEL=m
+CONFIG_NET_SCH_FQ_CODEL=y
+CONFIG_NET_SCH_FQ=m
+CONFIG_NET_SCH_HHF=m
+CONFIG_NET_SCH_PIE=y
+CONFIG_NET_SCH_PLUG=m
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=m
+CONFIG_NET_CLS_BPF=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+CONFIG_NET_ACT_VLAN=m
+CONFIG_NET_ACT_BPF=m
+CONFIG_NET_ACT_CONNMARK=m
+CONFIG_VSOCKETS=m
+CONFIG_NETLINK_MMAP=y
+CONFIG_NETLINK_DIAG=y
+CONFIG_BPF_JIT=y
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIUART_INTEL=y
+CONFIG_BT_HCIUART_BCM=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_CFG80211=m
+CONFIG_CFG80211_WEXT=y
+CONFIG_MAC80211=m
+CONFIG_MAC80211_MESH=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_WCACHE=y
+CONFIG_EEPROM_SUNXI_SID=y
+CONFIG_SCSI_MQ_DEFAULT=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_ATA=y
+CONFIG_AHCI_SUNXI=y
+CONFIG_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BCACHE=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_MQ_DEFAULT=y
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_RAID=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+CONFIG_DM_DELAY=m
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_DM_SWITCH=m
+CONFIG_DM_LOG_WRITES=m
+CONFIG_NETDEVICES=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_RANDOM=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_IPVLAN=m
+CONFIG_VXLAN=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_NLMON=m
+CONFIG_SUN4I_EMAC=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_LIBERTAS_THINFIRM=m
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8187=m
+CONFIG_ATH_CARDS=m
+CONFIG_ATH9K=m
+CONFIG_ATH9K_AHB=y
+CONFIG_ATH9K_CHANNEL_CONTEXT=y
+CONFIG_ATH9K_HTC=m
+CONFIG_CARL9170=m
+CONFIG_ATH6KL=m
+CONFIG_ATH6KL_SDIO=m
+CONFIG_ATH6KL_USB=m
+CONFIG_AR5523=m
+CONFIG_ATH10K=m
+CONFIG_WCN36XX=m
+CONFIG_B43=m
+CONFIG_B43_SDIO=y
+CONFIG_BRCMFMAC=m
+CONFIG_BRCMFMAC_USB=y
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_SPI=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_SPI=m
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT3573=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_RT55XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RTL8192CU=m
+CONFIG_WL_TI=y
+CONFIG_WL1251=m
+CONFIG_WL1251_SPI=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX=m
+CONFIG_WL18XX=m
+CONFIG_WLCORE_SPI=m
+CONFIG_WLCORE_SDIO=m
+CONFIG_ZD1211RW=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_USB=m
+CONFIG_CW1200=m
+CONFIG_CW1200_WLAN_SDIO=m
+CONFIG_CW1200_WLAN_SPI=m
+CONFIG_RSI_91X=m
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_SUN4I=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AXP20X_PEK=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MV64XXX=y
+CONFIG_I2C_SUN6I_P2WI=y
+CONFIG_SPI=y
+CONFIG_SPI_SPIDEV=y
+CONFIG_SPI_SUN4I=y
+CONFIG_SPI_SUN6I=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_RESET=y
+CONFIG_THERMAL=y
+CONFIG_CPU_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_SUNXI_WATCHDOG=y
+CONFIG_MFD_AXP20X=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_AXP20X=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
+CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
+CONFIG_MEDIA_RADIO_SUPPORT=y
+CONFIG_MEDIA_SDR_SUPPORT=y
+CONFIG_MEDIA_RC_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_ADV_DEBUG=y
+CONFIG_DVB_DYNAMIC_MINORS=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_DTCS033=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STK1135=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TOUPTEK=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_USB_PWC=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_STK1160_COMMON=m
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_AU0828_RC=y
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_DVB_USB=m
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_V2=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_AF9035=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_AZ6007=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_USB_RTL28XXU=m
+CONFIG_DVB_USB_DVBSKY=m
+CONFIG_SMS_USB_DRV=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+CONFIG_DVB_AS102=m
+CONFIG_USB_AIRSPY=m
+CONFIG_USB_HACKRF=m
+CONFIG_USB_MSI2500=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_V4L_TEST_DRIVERS=y
+CONFIG_VIDEO_VIVID=m
+CONFIG_VIDEO_VIM2M=m
+CONFIG_SMS_SDIO_DRV=m
+CONFIG_RADIO_SI470X=y
+CONFIG_USB_SI470X=m
+CONFIG_I2C_SI470X=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_SI4713=m
+CONFIG_PLATFORM_SI4713=m
+CONFIG_USB_MR800=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_SHARK=m
+CONFIG_RADIO_SHARK2=m
+CONFIG_USB_KEENE=m
+CONFIG_USB_RAREMONO=m
+CONFIG_USB_MA901=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_WL1273=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_FB=y
+CONFIG_FB_SIMPLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_MMC=y
+CONFIG_MMC_SUNXI=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_CLASS_FLASH=y
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_LP5562=m
+CONFIG_LEDS_LP8501=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_PCA963X=m
+CONFIG_LEDS_DAC124S085=m
+CONFIG_LEDS_REGULATOR=y
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_TCA6507=m
+CONFIG_LEDS_LM355x=m
+CONFIG_LEDS_BLINKM=m
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_TRANSIENT=y
+CONFIG_LEDS_TRIGGER_CAMERA=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_INTF_SYSFS is not set
+# CONFIG_RTC_INTF_PROC is not set
+CONFIG_RTC_DRV_SUN6I=y
+CONFIG_RTC_DRV_SUNXI=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_SUN6I=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXTCON=y
+CONFIG_PWM=y
+CONFIG_PWM_SUN4I=y
+CONFIG_PHY_SUN4I_USB=y
+CONFIG_PHY_SUN9I_USB=y
+CONFIG_EXT4_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_CRYPTO_DEV_SUN4I_SS=y
+CONFIG_ARM_CRYPTO=y
+CONFIG_CRYPTO_SHA1_ARM_NEON=y
+CONFIG_CRYPTO_SHA256_ARM=y
+CONFIG_CRYPTO_SHA512_ARM_NEON=y
+CONFIG_CRYPTO_AES_ARM_BS=y

recipes-kernel/linux/linux/fs/aufs/Kconfig

@@ -1,203 +0,0 @@
-config AUFS_FS
-	tristate "Aufs (Advanced multi layered unification filesystem) support"
-	depends on EXPERIMENTAL
-	help
-	Aufs is a stackable unification filesystem such as Unionfs,
-	which unifies several directories and provides a merged single
-	directory.
-	In the early days, aufs was entirely re-designed and
-	re-implemented Unionfs Version 1.x series. Introducing many
-	original ideas, approaches and improvements, it becomes totally
-	different from Unionfs while keeping the basic features.
-
-if AUFS_FS
-choice
-	prompt "Maximum number of branches"
-	default AUFS_BRANCH_MAX_127
-	help
-	Specifies the maximum number of branches (or member directories)
-	in a single aufs. The larger value consumes more system
-	resources and has a minor impact to performance.
-config AUFS_BRANCH_MAX_127
-	bool "127"
-	help
-	Specifies the maximum number of branches (or member directories)
-	in a single aufs. The larger value consumes more system
-	resources and has a minor impact to performance.
-config AUFS_BRANCH_MAX_511
-	bool "511"
-	help
-	Specifies the maximum number of branches (or member directories)
-	in a single aufs. The larger value consumes more system
-	resources and has a minor impact to performance.
-config AUFS_BRANCH_MAX_1023
-	bool "1023"
-	help
-	Specifies the maximum number of branches (or member directories)
-	in a single aufs. The larger value consumes more system
-	resources and has a minor impact to performance.
-config AUFS_BRANCH_MAX_32767
-	bool "32767"
-	help
-	Specifies the maximum number of branches (or member directories)
-	in a single aufs. The larger value consumes more system
-	resources and has a minor impact to performance.
-endchoice
-
-config AUFS_SBILIST
-	bool
-	depends on AUFS_MAGIC_SYSRQ || PROC_FS
-	default y
-	help
-	Automatic configuration for internal use.
-	When aufs supports Magic SysRq or /proc, enabled automatically.
-
-config AUFS_HNOTIFY
-	bool "Detect direct branch access (bypassing aufs)"
-	help
-	If you want to modify files on branches directly, eg. bypassing aufs,
-	and want aufs to detect the changes of them fully, then enable this
-	option and use 'udba=notify' mount option.
-	Currently there is only one available configuration, "fsnotify".
-	It will have a negative impact to the performance.
-	See detail in aufs.5.
-
-choice
-	prompt "method" if AUFS_HNOTIFY
-	default AUFS_HFSNOTIFY
-config AUFS_HFSNOTIFY
-	bool "fsnotify"
-	select FSNOTIFY
-endchoice
-
-config AUFS_EXPORT
-	bool "NFS-exportable aufs"
-	depends on EXPORTFS
-	help
-	If you want to export your mounted aufs via NFS, then enable this
-	option. There are several requirements for this configuration.
-	See detail in aufs.5.
-
-config AUFS_INO_T_64
-	bool
-	depends on AUFS_EXPORT
-	depends on 64BIT && !(ALPHA || S390)
-	default y
-	help
-	Automatic configuration for internal use.
-	/* typedef unsigned long/int __kernel_ino_t */
-	/* alpha and s390x are int */
-
-config AUFS_RDU
-	bool "Readdir in userspace"
-	help
-	Aufs has two methods to provide a merged view for a directory,
-	by a user-space library and by kernel-space natively. The latter
-	is always enabled but sometimes large and slow.
-	If you enable this option, install the library in aufs2-util
-	package, and set some environment variables for your readdir(3),
-	then the work will be handled in user-space which generally
-	shows better performance in most cases.
-	See detail in aufs.5.
-
-config AUFS_PROC_MAP
-	bool "support for /proc/maps and lsof(1)"
-	depends on PROC_FS
-	help
-	When you issue mmap(2) in aufs, it is actually a direct mmap(2)
-	call to the file on the branch fs since the file in aufs is
-	purely virtual. And the file path printed in /proc/maps (and
-	others) will be the path on the branch fs. In most cases, it
-	does no harm. But some utilities like lsof(1) may confuse since
-	the utility or user may expect the file path in aufs to be
-	printed.
-	To address this issue, aufs provides a patch which introduces a
-	new member called vm_prfile into struct vm_are_struct. The patch
-	is meaningless without enabling this configuration since nobody
-	sets the new vm_prfile member.
-	If you don't apply the patch, then enabling this configuration
-	will cause a compile error.
-	This approach is fragile since if someone else make some changes
-	around vm_file, then vm_prfile may not work anymore. As a
-	workaround such case, aufs provides this configuration. If you
-	disable it, then lsof(1) may produce incorrect result but the
-	problem will be gone even if the aufs patch is applied (I hope).
-
-config AUFS_SP_IATTR
-	bool "Respect the attributes (mtime/ctime mainly) of special files"
-	help
-	When you write something to a special file, some attributes of it
-	(mtime/ctime mainly) may be updated. Generally such updates are
-	less important (actually some device drivers and NFS ignore
-	it). But some applications (such like test program) requires
-	such updates. If you need these updates, then enable this
-	configuration which introduces some overhead.
-	Currently this configuration handles FIFO only.
-
-config AUFS_SHWH
-	bool "Show whiteouts"
-	help
-	If you want to make the whiteouts in aufs visible, then enable
-	this option and specify 'shwh' mount option. Although it may
-	sounds like philosophy or something, but in technically it
-	simply shows the name of whiteout with keeping its behaviour.
-
-config AUFS_BR_RAMFS
-	bool "Ramfs (initramfs/rootfs) as an aufs branch"
-	help
-	If you want to use ramfs as an aufs branch fs, then enable this
-	option. Generally tmpfs is recommended.
-	Aufs prohibited them to be a branch fs by default, because
-	initramfs becomes unusable after switch_root or something
-	generally. If you sets initramfs as an aufs branch and boot your
-	system by switch_root, you will meet a problem easily since the
-	files in initramfs may be inaccessible.
-	Unless you are going to use ramfs as an aufs branch fs without
-	switch_root or something, leave it N.
-
-config AUFS_BR_FUSE
-	bool "Fuse fs as an aufs branch"
-	depends on FUSE_FS
-	select AUFS_POLL
-	help
-	If you want to use fuse-based userspace filesystem as an aufs
-	branch fs, then enable this option.
-	It implements the internal poll(2) operation which is
-	implemented by fuse only (curretnly).
-
-config AUFS_POLL
-	bool
-	help
-	Automatic configuration for internal use.
-
-config AUFS_BR_HFSPLUS
-	bool "Hfsplus as an aufs branch"
-	depends on HFSPLUS_FS
-	default y
-	help
-	If you want to use hfsplus fs as an aufs branch fs, then enable
-	this option. This option introduces a small overhead at
-	copying-up a file on hfsplus.
-
-config AUFS_BDEV_LOOP
-	bool
-	depends on BLK_DEV_LOOP
-	default y
-	help
-	Automatic configuration for internal use.
-	Convert =[ym] into =y.
-
-config AUFS_DEBUG
-	bool "Debug aufs"
-	help
-	Enable this to compile aufs internal debug code.
-	It will have a negative impact to the performance.
-
-config AUFS_MAGIC_SYSRQ
-	bool
-	depends on AUFS_DEBUG && MAGIC_SYSRQ
-	default y
-	help
-	Automatic configuration for internal use.
-	When aufs supports Magic SysRq, enabled automatically.
-endif

recipes-kernel/linux/linux/fs/aufs/Makefile

@@ -1,42 +0,0 @@
-
-include ${src}/magic.mk
-ifeq (${CONFIG_AUFS_FS},m)
-include ${src}/conf.mk
-endif
--include ${src}/priv_def.mk
-
-# cf. include/linux/kernel.h
-# enable pr_debug
-ccflags-y += -DDEBUG
-# sparse requires the full pathname
-ifdef M
-ccflags-y += -include ${M}/../../include/linux/aufs_type.h
-else
-ccflags-y += -include ${srctree}/include/linux/aufs_type.h
-endif
-
-obj-$(CONFIG_AUFS_FS) += aufs.o
-aufs-y := module.o sbinfo.o super.o branch.o xino.o sysaufs.o opts.o \
-	wkq.o vfsub.o dcsub.o \
-	cpup.o whout.o wbr_policy.o \
-	dinfo.o dentry.o \
-	dynop.o \
-	finfo.o file.o f_op.o \
-	dir.o vdir.o \
-	iinfo.o inode.o i_op.o i_op_add.o i_op_del.o i_op_ren.o \
-	ioctl.o
-
-# all are boolean
-aufs-$(CONFIG_PROC_FS) += procfs.o plink.o
-aufs-$(CONFIG_SYSFS) += sysfs.o
-aufs-$(CONFIG_DEBUG_FS) += dbgaufs.o
-aufs-$(CONFIG_AUFS_BDEV_LOOP) += loop.o
-aufs-$(CONFIG_AUFS_HNOTIFY) += hnotify.o
-aufs-$(CONFIG_AUFS_HFSNOTIFY) += hfsnotify.o
-aufs-$(CONFIG_AUFS_EXPORT) += export.o
-aufs-$(CONFIG_AUFS_POLL) += poll.o
-aufs-$(CONFIG_AUFS_RDU) += rdu.o
-aufs-$(CONFIG_AUFS_SP_IATTR) += f_op_sp.o
-aufs-$(CONFIG_AUFS_BR_HFSPLUS) += hfsplus.o
-aufs-$(CONFIG_AUFS_DEBUG) += debug.o
-aufs-$(CONFIG_AUFS_MAGIC_SYSRQ) += sysrq.o

recipes-kernel/linux/linux/fs/aufs/aufs.h

@@ -1,60 +0,0 @@
-/*
- * Copyright (C) 2005-2012 Junjiro R. Okajima
- *
- * This program, aufs is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-/*
- * all header files
- */
-
-#ifndef __AUFS_H__
-#define __AUFS_H__
-
-#ifdef __KERNEL__
-
-#define AuStub(type, name, body, ...) \
-	static inline type name(__VA_ARGS__) { body; }
-
-#define AuStubVoid(name, ...) \
-	AuStub(void, name, , __VA_ARGS__)
-#define AuStubInt0(name, ...) \
-	AuStub(int, name, return 0, __VA_ARGS__)
-
-#include "debug.h"
-
-#include "branch.h"
-#include "cpup.h"
-#include "dcsub.h"
-#include "dbgaufs.h"
-#include "dentry.h"
-#include "dir.h"
-#include "dynop.h"
-#include "file.h"
-#include "fstype.h"
-#include "inode.h"
-#include "loop.h"
-#include "module.h"
-#include "opts.h"
-#include "rwsem.h"
-#include "spl.h"
-#include "super.h"
-#include "sysaufs.h"
-#include "vfsub.h"
-#include "whout.h"
-#include "wkq.h"
-
-#endif /* __KERNEL__ */
-#endif /* __AUFS_H__ */

recipes-kernel/linux/linux/fs/aufs/branch.h

@@ -1,230 +0,0 @@
-/*
- * Copyright (C) 2005-2012 Junjiro R. Okajima
- *
- * This program, aufs is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-/*
- * branch filesystems and xino for them
- */
-
-#ifndef __AUFS_BRANCH_H__
-#define __AUFS_BRANCH_H__
-
-#ifdef __KERNEL__
-
-#include <linux/mount.h>
-#include "dynop.h"
-#include "rwsem.h"
-#include "super.h"
-
-/* ---------------------------------------------------------------------- */
-
-/* a xino file */
-struct au_xino_file {
-	struct file		*xi_file;
-	struct mutex		xi_nondir_mtx;
-
-	/* todo: make xino files an array to support huge inode number */
-
-#ifdef CONFIG_DEBUG_FS
-	struct dentry		 *xi_dbgaufs;
-#endif
-};
-
-/* members for writable branch only */
-enum {AuBrWh_BASE, AuBrWh_PLINK, AuBrWh_ORPH, AuBrWh_Last};
-struct au_wbr {
-	struct au_rwsem		wbr_wh_rwsem;
-	struct dentry		*wbr_wh[AuBrWh_Last];
-	atomic_t		wbr_wh_running;
-#define wbr_whbase		wbr_wh[AuBrWh_BASE]	/* whiteout base */
-#define wbr_plink		wbr_wh[AuBrWh_PLINK]	/* pseudo-link dir */
-#define wbr_orph		wbr_wh[AuBrWh_ORPH]	/* dir for orphans */
-
-	/* mfs mode */
-	unsigned long long	wbr_bytes;
-};
-
-/* ext2 has 3 types of operations at least, ext3 has 4 */
-#define AuBrDynOp (AuDyLast * 4)
-
-/* protected by superblock rwsem */
-struct au_branch {
-	struct au_xino_file	br_xino;
-
-	aufs_bindex_t		br_id;
-
-	int			br_perm;
-	struct vfsmount		*br_mnt;
-	spinlock_t		br_dykey_lock;
-	struct au_dykey		*br_dykey[AuBrDynOp];
-	atomic_t		br_count;
-
-	struct au_wbr		*br_wbr;
-
-	/* xino truncation */
-	blkcnt_t		br_xino_upper;	/* watermark in blocks */
-	atomic_t		br_xino_running;
-
-#ifdef CONFIG_AUFS_HFSNOTIFY
-	struct fsnotify_group	*br_hfsn_group;
-	struct fsnotify_ops	br_hfsn_ops;
-#endif
-
-#ifdef CONFIG_SYSFS
-	/* an entry under sysfs per mount-point */
-	char			br_name[8];
-	struct attribute	br_attr;
-#endif
-};
-
-/* ---------------------------------------------------------------------- */
-
-/* branch permissions and attributes */
-#define AuBrPerm_RW		1		/* writable, hardlinkable wh */
-#define AuBrPerm_RO		(1 << 1)	/* readonly */
-#define AuBrPerm_RR		(1 << 2)	/* natively readonly */
-#define AuBrPerm_Mask		(AuBrPerm_RW | AuBrPerm_RO | AuBrPerm_RR)
-
-#define AuBrRAttr_WH		(1 << 3)	/* whiteout-able */
-
-#define AuBrWAttr_NoLinkWH	(1 << 4)	/* un-hardlinkable whiteouts */
-
-static inline int au_br_writable(int brperm)
-{
-	return brperm & AuBrPerm_RW;
-}
-
-static inline int au_br_whable(int brperm)
-{
-	return brperm & (AuBrPerm_RW | AuBrRAttr_WH);
-}
-
-static inline int au_br_wh_linkable(int brperm)
-{
-	return !(brperm & AuBrWAttr_NoLinkWH);
-}
-
-static inline int au_br_rdonly(struct au_branch *br)
-{
-	return ((br->br_mnt->mnt_sb->s_flags & MS_RDONLY)
-		|| !au_br_writable(br->br_perm))
-		? -EROFS : 0;
-}
-
-static inline int au_br_hnotifyable(int brperm __maybe_unused)
-{
-#ifdef CONFIG_AUFS_HNOTIFY
-	return !(brperm & AuBrPerm_RR);
-#else
-	return 0;
-#endif
-}
-
-/* ---------------------------------------------------------------------- */
-
-/* branch.c */
-struct au_sbinfo;
-void au_br_free(struct au_sbinfo *sinfo);
-int au_br_index(struct super_block *sb, aufs_bindex_t br_id);
-struct au_opt_add;
-int au_br_add(struct super_block *sb, struct au_opt_add *add, int remount);
-struct au_opt_del;
-int au_br_del(struct super_block *sb, struct au_opt_del *del, int remount);
-long au_ibusy_ioctl(struct file *file, unsigned long arg);
-#ifdef CONFIG_COMPAT
-long au_ibusy_compat_ioctl(struct file *file, unsigned long arg);
-#endif
-struct au_opt_mod;
-int au_br_mod(struct super_block *sb, struct au_opt_mod *mod, int remount,
-	      int *do_refresh);
-
-/* xino.c */
-static const loff_t au_loff_max = LLONG_MAX;
-
-int au_xib_trunc(struct super_block *sb);
-ssize_t xino_fread(au_readf_t func, struct file *file, void *buf, size_t size,
-		   loff_t *pos);
-ssize_t xino_fwrite(au_writef_t func, struct file *file, void *buf, size_t size,
-		    loff_t *pos);
-struct file *au_xino_create2(struct file *base_file, struct file *copy_src);
-struct file *au_xino_create(struct super_block *sb, char *fname, int silent);
-ino_t au_xino_new_ino(struct super_block *sb);
-void au_xino_delete_inode(struct inode *inode, const int unlinked);
-int au_xino_write(struct super_block *sb, aufs_bindex_t bindex, ino_t h_ino,
-		  ino_t ino);
-int au_xino_read(struct super_block *sb, aufs_bindex_t bindex, ino_t h_ino,
-		 ino_t *ino);
-int au_xino_br(struct super_block *sb, struct au_branch *br, ino_t hino,
-	       struct file *base_file, int do_test);
-int au_xino_trunc(struct super_block *sb, aufs_bindex_t bindex);
-
-struct au_opt_xino;
-int au_xino_set(struct super_block *sb, struct au_opt_xino *xino, int remount);
-void au_xino_clr(struct super_block *sb);
-struct file *au_xino_def(struct super_block *sb);
-int au_xino_path(struct seq_file *seq, struct file *file);
-
-/* ---------------------------------------------------------------------- */
-
-/* Superblock to branch */
-static inline
-aufs_bindex_t au_sbr_id(struct super_block *sb, aufs_bindex_t bindex)
-{
-	return au_sbr(sb, bindex)->br_id;
-}
-
-static inline
-struct vfsmount *au_sbr_mnt(struct super_block *sb, aufs_bindex_t bindex)
-{
-	return au_sbr(sb, bindex)->br_mnt;
-}
-
-static inline
-struct super_block *au_sbr_sb(struct super_block *sb, aufs_bindex_t bindex)
-{
-	return au_sbr_mnt(sb, bindex)->mnt_sb;
-}
-
-static inline void au_sbr_put(struct super_block *sb, aufs_bindex_t bindex)
-{
-	atomic_dec(&au_sbr(sb, bindex)->br_count);
-}
-
-static inline int au_sbr_perm(struct super_block *sb, aufs_bindex_t bindex)
-{
-	return au_sbr(sb, bindex)->br_perm;
-}
-
-static inline int au_sbr_whable(struct super_block *sb, aufs_bindex_t bindex)
-{
-	return au_br_whable(au_sbr_perm(sb, bindex));
-}
-
-/* ---------------------------------------------------------------------- */
-
-/*
- * wbr_wh_read_lock, wbr_wh_write_lock
- * wbr_wh_read_unlock, wbr_wh_write_unlock, wbr_wh_downgrade_lock
- */
-AuSimpleRwsemFuncs(wbr_wh, struct au_wbr *wbr, &wbr->wbr_wh_rwsem);
-
-#define WbrWhMustNoWaiters(wbr)	AuRwMustNoWaiters(&wbr->wbr_wh_rwsem)
-#define WbrWhMustAnyLock(wbr)	AuRwMustAnyLock(&wbr->wbr_wh_rwsem)
-#define WbrWhMustWriteLock(wbr)	AuRwMustWriteLock(&wbr->wbr_wh_rwsem)
-
-#endif /* __KERNEL__ */
-#endif /* __AUFS_BRANCH_H__ */

recipes-kernel/linux/linux/fs/aufs/conf.mk

@@ -1,38 +0,0 @@
-
-AuConfStr = CONFIG_AUFS_FS=${CONFIG_AUFS_FS}
-
-define AuConf
-ifdef ${1}
-AuConfStr += ${1}=${${1}}
-endif
-endef
-
-AuConfAll = BRANCH_MAX_127 BRANCH_MAX_511 BRANCH_MAX_1023 BRANCH_MAX_32767 \
-	SBILIST \
-	HNOTIFY HFSNOTIFY \
-	EXPORT INO_T_64 \
-	RDU \
-	PROC_MAP \
-	SP_IATTR \
-	SHWH \
-	BR_RAMFS \
-	BR_FUSE POLL \
-	BR_HFSPLUS \
-	BDEV_LOOP \
-	DEBUG MAGIC_SYSRQ
-$(foreach i, ${AuConfAll}, \
-	$(eval $(call AuConf,CONFIG_AUFS_${i})))
-
-AuConfName = ${obj}/conf.str
-${AuConfName}.tmp: FORCE
-	@echo ${AuConfStr} | tr ' ' '\n' | sed -e 's/^/"/' -e 's/$$/\\n"/' > $@
-${AuConfName}: ${AuConfName}.tmp
-	@diff -q $< $@ > /dev/null 2>&1 || { \
-	echo '  GEN    ' $@; \
-	cp -p $< $@; \
-	}
-FORCE:
-clean-files += ${AuConfName} ${AuConfName}.tmp
-${obj}/sysfs.o: ${AuConfName}
-
--include ${srctree}/${src}/conf_priv.mk

recipes-kernel/linux/linux/fs/aufs/cpup.h

@@ -1,81 +0,0 @@
-/*
- * Copyright (C) 2005-2012 Junjiro R. Okajima
- *
- * This program, aufs is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-/*
- * copy-up/down functions
- */
-
-#ifndef __AUFS_CPUP_H__
-#define __AUFS_CPUP_H__
-
-#ifdef __KERNEL__
-
-#include <linux/path.h>
-
-struct inode;
-struct file;
-
-void au_cpup_attr_flags(struct inode *dst, struct inode *src);
-void au_cpup_attr_timesizes(struct inode *inode);
-void au_cpup_attr_nlink(struct inode *inode, int force);
-void au_cpup_attr_changeable(struct inode *inode);
-void au_cpup_igen(struct inode *inode, struct inode *h_inode);
-void au_cpup_attr_all(struct inode *inode, int force);
-
-/* ---------------------------------------------------------------------- */
-
-/* cpup flags */
-#define AuCpup_DTIME	1		/* do dtime_store/revert */
-#define AuCpup_KEEPLINO	(1 << 1)	/* do not clear the lower xino,
-					   for link(2) */
-#define au_ftest_cpup(flags, name)	((flags) & AuCpup_##name)
-#define au_fset_cpup(flags, name) \
-	do { (flags) |= AuCpup_##name; } while (0)
-#define au_fclr_cpup(flags, name) \
-	do { (flags) &= ~AuCpup_##name; } while (0)
-
-int au_copy_file(struct file *dst, struct file *src, loff_t len);
-int au_sio_cpup_single(struct dentry *dentry, aufs_bindex_t bdst,
-		       aufs_bindex_t bsrc, loff_t len, unsigned int flags,
-		       struct dentry *dst_parent);
-int au_sio_cpup_simple(struct dentry *dentry, aufs_bindex_t bdst, loff_t len,
-		       unsigned int flags);
-int au_sio_cpup_wh(struct dentry *dentry, aufs_bindex_t bdst, loff_t len,
-		   struct file *file);
-
-int au_cp_dirs(struct dentry *dentry, aufs_bindex_t bdst,
-	       int (*cp)(struct dentry *dentry, aufs_bindex_t bdst,
-			 struct dentry *h_parent, void *arg),
-	       void *arg);
-int au_cpup_dirs(struct dentry *dentry, aufs_bindex_t bdst);
-int au_test_and_cpup_dirs(struct dentry *dentry, aufs_bindex_t bdst);
-
-/* ---------------------------------------------------------------------- */
-
-/* keep timestamps when copyup */
-struct au_dtime {
-	struct dentry *dt_dentry;
-	struct path dt_h_path;
-	struct timespec dt_atime, dt_mtime;
-};
-void au_dtime_store(struct au_dtime *dt, struct dentry *dentry,
-		    struct path *h_path);
-void au_dtime_revert(struct au_dtime *dt);
-
-#endif /* __KERNEL__ */
-#endif /* __AUFS_CPUP_H__ */

recipes-kernel/linux/linux/fs/aufs/dbgaufs.c

@@ -1,334 +0,0 @@
-/*
- * Copyright (C) 2005-2012 Junjiro R. Okajima
- *
- * This program, aufs is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-/*
- * debugfs interface
- */
-
-#include <linux/debugfs.h>
-#include "aufs.h"
-
-#ifndef CONFIG_SYSFS
-#error DEBUG_FS depends upon SYSFS
-#endif
-
-static struct dentry *dbgaufs;
-static const mode_t dbgaufs_mode = S_IRUSR | S_IRGRP | S_IROTH;
-
-/* 20 is max digits length of ulong 64 */
-struct dbgaufs_arg {
-	int n;
-	char a[20 * 4];
-};
-
-/*
- * common function for all XINO files
- */
-static int dbgaufs_xi_release(struct inode *inode __maybe_unused,
-			      struct file *file)
-{
-	kfree(file->private_data);
-	return 0;
-}
-
-static int dbgaufs_xi_open(struct file *xf, struct file *file, int do_fcnt)
-{
-	int err;
-	struct kstat st;
-	struct dbgaufs_arg *p;
-
-	err = -ENOMEM;
-	p = kmalloc(sizeof(*p), GFP_NOFS);
-	if (unlikely(!p))
-		goto out;
-
-	err = 0;
-	p->n = 0;
-	file->private_data = p;
-	if (!xf)
-		goto out;
-
-	err = vfs_getattr(xf->f_vfsmnt, xf->f_dentry, &st);
-	if (!err) {
-		if (do_fcnt)
-			p->n = snprintf
-				(p->a, sizeof(p->a), "%ld, %llux%lu %lld\n",
-				 (long)file_count(xf), st.blocks, st.blksize,
-				 (long long)st.size);
-		else
-			p->n = snprintf(p->a, sizeof(p->a), "%llux%lu %lld\n",
-					st.blocks, st.blksize,
-					(long long)st.size);
-		AuDebugOn(p->n >= sizeof(p->a));
-	} else {
-		p->n = snprintf(p->a, sizeof(p->a), "err %d\n", err);
-		err = 0;
-	}
-
-out:
-	return err;
-
-}
-
-static ssize_t dbgaufs_xi_read(struct file *file, char __user *buf,
-			       size_t count, loff_t *ppos)
-{
-	struct dbgaufs_arg *p;
-
-	p = file->private_data;
-	return simple_read_from_buffer(buf, count, ppos, p->a, p->n);
-}
-
-/* ---------------------------------------------------------------------- */
-
-static int dbgaufs_xib_open(struct inode *inode, struct file *file)
-{
-	int err;
-	struct au_sbinfo *sbinfo;
-	struct super_block *sb;
-
-	sbinfo = inode->i_private;
-	sb = sbinfo->si_sb;
-	si_noflush_read_lock(sb);
-	err = dbgaufs_xi_open(sbinfo->si_xib, file, /*do_fcnt*/0);
-	si_read_unlock(sb);
-	return err;
-}
-
-static const struct file_operations dbgaufs_xib_fop = {
-	.owner		= THIS_MODULE,
-	.open		= dbgaufs_xib_open,
-	.release	= dbgaufs_xi_release,
-	.read		= dbgaufs_xi_read
-};
-
-/* ---------------------------------------------------------------------- */
-
-#define DbgaufsXi_PREFIX "xi"
-
-static int dbgaufs_xino_open(struct inode *inode, struct file *file)
-{
-	int err;
-	long l;
-	struct au_sbinfo *sbinfo;
-	struct super_block *sb;
-	struct file *xf;
-	struct qstr *name;
-
-	err = -ENOENT;
-	xf = NULL;
-	name = &file->f_dentry->d_name;
-	if (unlikely(name->len < sizeof(DbgaufsXi_PREFIX)
-		     || memcmp(name->name, DbgaufsXi_PREFIX,
-			       sizeof(DbgaufsXi_PREFIX) - 1)))
-		goto out;
-	err = strict_strtol(name->name + sizeof(DbgaufsXi_PREFIX) - 1, 10, &l);
-	if (unlikely(err))
-		goto out;
-
-	sbinfo = inode->i_private;
-	sb = sbinfo->si_sb;
-	si_noflush_read_lock(sb);
-	if (l <= au_sbend(sb)) {
-		xf = au_sbr(sb, (aufs_bindex_t)l)->br_xino.xi_file;
-		err = dbgaufs_xi_open(xf, file, /*do_fcnt*/1);
-	} else
-		err = -ENOENT;
-	si_read_unlock(sb);
-
-out:
-	return err;
-}
-
-static const struct file_operations dbgaufs_xino_fop = {
-	.owner		= THIS_MODULE,
-	.open		= dbgaufs_xino_open,
-	.release	= dbgaufs_xi_release,
-	.read		= dbgaufs_xi_read
-};
-
-void dbgaufs_brs_del(struct super_block *sb, aufs_bindex_t bindex)
-{
-	aufs_bindex_t bend;
-	struct au_branch *br;
-	struct au_xino_file *xi;
-
-	if (!au_sbi(sb)->si_dbgaufs)
-		return;
-
-	bend = au_sbend(sb);
-	for (; bindex <= bend; bindex++) {
-		br = au_sbr(sb, bindex);
-		xi = &br->br_xino;
-		if (xi->xi_dbgaufs) {
-			debugfs_remove(xi->xi_dbgaufs);
-			xi->xi_dbgaufs = NULL;
-		}
-	}
-}
-
-void dbgaufs_brs_add(struct super_block *sb, aufs_bindex_t bindex)
-{
-	struct au_sbinfo *sbinfo;
-	struct dentry *parent;
-	struct au_branch *br;
-	struct au_xino_file *xi;
-	aufs_bindex_t bend;
-	char name[sizeof(DbgaufsXi_PREFIX) + 5]; /* "xi" bindex NULL */
-
-	sbinfo = au_sbi(sb);
-	parent = sbinfo->si_dbgaufs;
-	if (!parent)
-		return;
-
-	bend = au_sbend(sb);
-	for (; bindex <= bend; bindex++) {
-		snprintf(name, sizeof(name), DbgaufsXi_PREFIX "%d", bindex);
-		br = au_sbr(sb, bindex);
-		xi = &br->br_xino;
-		AuDebugOn(xi->xi_dbgaufs);
-		xi->xi_dbgaufs = debugfs_create_file(name, dbgaufs_mode, parent,
-						     sbinfo, &dbgaufs_xino_fop);
-		/* ignore an error */
-		if (unlikely(!xi->xi_dbgaufs))
-			AuWarn1("failed %s under debugfs\n", name);
-	}
-}
-
-/* ---------------------------------------------------------------------- */
-
-#ifdef CONFIG_AUFS_EXPORT
-static int dbgaufs_xigen_open(struct inode *inode, struct file *file)
-{
-	int err;
-	struct au_sbinfo *sbinfo;
-	struct super_block *sb;
-
-	sbinfo = inode->i_private;
-	sb = sbinfo->si_sb;
-	si_noflush_read_lock(sb);
-	err = dbgaufs_xi_open(sbinfo->si_xigen, file, /*do_fcnt*/0);
-	si_read_unlock(sb);
-	return err;
-}
-
-static const struct file_operations dbgaufs_xigen_fop = {
-	.owner		= THIS_MODULE,
-	.open		= dbgaufs_xigen_open,
-	.release	= dbgaufs_xi_release,
-	.read		= dbgaufs_xi_read
-};
-
-static int dbgaufs_xigen_init(struct au_sbinfo *sbinfo)
-{
-	int err;
-
-	/*
-	 * This function is a dynamic '__init' fucntion actually,
-	 * so the tiny check for si_rwsem is unnecessary.
-	 */
-	/* AuRwMustWriteLock(&sbinfo->si_rwsem); */
-
-	err = -EIO;
-	sbinfo->si_dbgaufs_xigen = debugfs_create_file
-		("xigen", dbgaufs_mode, sbinfo->si_dbgaufs, sbinfo,
-		 &dbgaufs_xigen_fop);
-	if (sbinfo->si_dbgaufs_xigen)
-		err = 0;
-
-	return err;
-}
-#else
-static int dbgaufs_xigen_init(struct au_sbinfo *sbinfo)
-{
-	return 0;
-}
-#endif /* CONFIG_AUFS_EXPORT */
-
-/* ---------------------------------------------------------------------- */
-
-void dbgaufs_si_fin(struct au_sbinfo *sbinfo)
-{
-	/*
-	 * This function is a dynamic '__init' fucntion actually,
-	 * so the tiny check for si_rwsem is unnecessary.
-	 */
-	/* AuRwMustWriteLock(&sbinfo->si_rwsem); */
-
-	debugfs_remove_recursive(sbinfo->si_dbgaufs);
-	sbinfo->si_dbgaufs = NULL;
-	kobject_put(&sbinfo->si_kobj);
-}
-
-int dbgaufs_si_init(struct au_sbinfo *sbinfo)
-{
-	int err;
-	char name[SysaufsSiNameLen];
-
-	/*
-	 * This function is a dynamic '__init' fucntion actually,
-	 * so the tiny check for si_rwsem is unnecessary.
-	 */
-	/* AuRwMustWriteLock(&sbinfo->si_rwsem); */
-
-	err = -ENOENT;
-	if (!dbgaufs) {
-		AuErr1("/debug/aufs is uninitialized\n");
-		goto out;
-	}
-
-	err = -EIO;
-	sysaufs_name(sbinfo, name);
-	sbinfo->si_dbgaufs = debugfs_create_dir(name, dbgaufs);
-	if (unlikely(!sbinfo->si_dbgaufs))
-		goto out;
-	kobject_get(&sbinfo->si_kobj);
-
-	sbinfo->si_dbgaufs_xib = debugfs_create_file
-		("xib", dbgaufs_mode, sbinfo->si_dbgaufs, sbinfo,
-		 &dbgaufs_xib_fop);
-	if (unlikely(!sbinfo->si_dbgaufs_xib))
-		goto out_dir;
-
-	err = dbgaufs_xigen_init(sbinfo);
-	if (!err)
-		goto out; /* success */
-
-out_dir:
-	dbgaufs_si_fin(sbinfo);
-out:
-	return err;
-}
-
-/* ---------------------------------------------------------------------- */
-
-void dbgaufs_fin(void)
-{
-	debugfs_remove(dbgaufs);
-}
-
-int __init dbgaufs_init(void)
-{
-	int err;
-
-	err = -EIO;
-	dbgaufs = debugfs_create_dir(AUFS_NAME, NULL);
-	if (dbgaufs)
-		err = 0;
-	return err;
-}

recipes-kernel/linux/linux/fs/aufs/dbgaufs.h

@@ -1,49 +0,0 @@
-/*
- * Copyright (C) 2005-2012 Junjiro R. Okajima
- *
- * This program, aufs is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-/*
- * debugfs interface
- */
-
-#ifndef __DBGAUFS_H__
-#define __DBGAUFS_H__
-
-#ifdef __KERNEL__
-
-struct super_block;
-struct au_sbinfo;
-
-#ifdef CONFIG_DEBUG_FS
-/* dbgaufs.c */
-void dbgaufs_brs_del(struct super_block *sb, aufs_bindex_t bindex);
-void dbgaufs_brs_add(struct super_block *sb, aufs_bindex_t bindex);
-void dbgaufs_si_fin(struct au_sbinfo *sbinfo);
-int dbgaufs_si_init(struct au_sbinfo *sbinfo);
-void dbgaufs_fin(void);
-int __init dbgaufs_init(void);
-#else
-AuStubVoid(dbgaufs_brs_del, struct super_block *sb, aufs_bindex_t bindex)
-AuStubVoid(dbgaufs_brs_add, struct super_block *sb, aufs_bindex_t bindex)
-AuStubVoid(dbgaufs_si_fin, struct au_sbinfo *sbinfo)
-AuStubInt0(dbgaufs_si_init, struct au_sbinfo *sbinfo)
-AuStubVoid(dbgaufs_fin, void)
-AuStubInt0(__init dbgaufs_init, void)
-#endif /* CONFIG_DEBUG_FS */
-
-#endif /* __KERNEL__ */
-#endif /* __DBGAUFS_H__ */

recipes-kernel/linux/linux/fs/aufs/dcsub.c

@@ -1,243 +0,0 @@
-/*
- * Copyright (C) 2005-2012 Junjiro R. Okajima
- *
- * This program, aufs is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-/*
- * sub-routines for dentry cache
- */
-
-#include "aufs.h"
-
-static void au_dpage_free(struct au_dpage *dpage)
-{
-	int i;
-	struct dentry **p;
-
-	p = dpage->dentries;
-	for (i = 0; i < dpage->ndentry; i++)
-		dput(*p++);
-	free_page((unsigned long)dpage->dentries);
-}
-
-int au_dpages_init(struct au_dcsub_pages *dpages, gfp_t gfp)
-{
-	int err;
-	void *p;
-
-	err = -ENOMEM;
-	dpages->dpages = kmalloc(sizeof(*dpages->dpages), gfp);
-	if (unlikely(!dpages->dpages))
-		goto out;
-
-	p = (void *)__get_free_page(gfp);
-	if (unlikely(!p))
-		goto out_dpages;
-
-	dpages->dpages[0].ndentry = 0;
-	dpages->dpages[0].dentries = p;
-	dpages->ndpage = 1;
-	return 0; /* success */
-
-out_dpages:
-	kfree(dpages->dpages);
-out:
-	return err;
-}
-
-void au_dpages_free(struct au_dcsub_pages *dpages)
-{
-	int i;
-	struct au_dpage *p;
-
-	p = dpages->dpages;
-	for (i = 0; i < dpages->ndpage; i++)
-		au_dpage_free(p++);
-	kfree(dpages->dpages);
-}
-
-static int au_dpages_append(struct au_dcsub_pages *dpages,
-			    struct dentry *dentry, gfp_t gfp)
-{
-	int err, sz;
-	struct au_dpage *dpage;
-	void *p;
-
-	dpage = dpages->dpages + dpages->ndpage - 1;
-	sz = PAGE_SIZE / sizeof(dentry);
-	if (unlikely(dpage->ndentry >= sz)) {
-		AuLabel(new dpage);
-		err = -ENOMEM;
-		sz = dpages->ndpage * sizeof(*dpages->dpages);
-		p = au_kzrealloc(dpages->dpages, sz,
-				 sz + sizeof(*dpages->dpages), gfp);
-		if (unlikely(!p))
-			goto out;
-
-		dpages->dpages = p;
-		dpage = dpages->dpages + dpages->ndpage;
-		p = (void *)__get_free_page(gfp);
-		if (unlikely(!p))
-			goto out;
-
-		dpage->ndentry = 0;
-		dpage->dentries = p;
-		dpages->ndpage++;
-	}
-
-	AuDebugOn(!dentry->d_count);
-	dpage->dentries[dpage->ndentry++] = dget_dlock(dentry);
-	return 0; /* success */
-
-out:
-	return err;
-}
-
-int au_dcsub_pages(struct au_dcsub_pages *dpages, struct dentry *root,
-		   au_dpages_test test, void *arg)
-{
-	int err;
-	struct dentry *this_parent;
-	struct list_head *next;
-	struct super_block *sb = root->d_sb;
-
-	err = 0;
-	write_seqlock(&rename_lock);
-	this_parent = root;
-	spin_lock(&this_parent->d_lock);
-repeat:
-	next = this_parent->d_subdirs.next;
-resume:
-	if (this_parent->d_sb == sb
-	    && !IS_ROOT(this_parent)
-	    && au_di(this_parent)
-	    && this_parent->d_count
-	    && (!test || test(this_parent, arg))) {
-		err = au_dpages_append(dpages, this_parent, GFP_ATOMIC);
-		if (unlikely(err))
-			goto out;
-	}
-
-	while (next != &this_parent->d_subdirs) {
-		struct list_head *tmp = next;
-		struct dentry *dentry = list_entry(tmp, struct dentry,
-						   d_u.d_child);
-
-		next = tmp->next;
-		spin_lock_nested(&dentry->d_lock, DENTRY_D_LOCK_NESTED);
-		if (dentry->d_count) {
-			if (!list_empty(&dentry->d_subdirs)) {
-				spin_unlock(&this_parent->d_lock);
-				spin_release(&dentry->d_lock.dep_map, 1,
-					     _RET_IP_);
-				this_parent = dentry;
-				spin_acquire(&this_parent->d_lock.dep_map, 0, 1,
-					     _RET_IP_);
-				goto repeat;
-			}
-			if (dentry->d_sb == sb
-			    && au_di(dentry)
-			    && (!test || test(dentry, arg)))
-				err = au_dpages_append(dpages, dentry,
-						       GFP_ATOMIC);
-		}
-		spin_unlock(&dentry->d_lock);
-		if (unlikely(err))
-			goto out;
-	}
-
-	if (this_parent != root) {
-		struct dentry *tmp;
-		struct dentry *child;
-
-		tmp = this_parent->d_parent;
-		rcu_read_lock();
-		spin_unlock(&this_parent->d_lock);
-		child = this_parent;
-		this_parent = tmp;
-		spin_lock(&this_parent->d_lock);
-		rcu_read_unlock();
-		next = child->d_u.d_child.next;
-		goto resume;
-	}
-
-out:
-	spin_unlock(&this_parent->d_lock);
-	write_sequnlock(&rename_lock);
-	return err;
-}
-
-int au_dcsub_pages_rev(struct au_dcsub_pages *dpages, struct dentry *dentry,
-		       int do_include, au_dpages_test test, void *arg)
-{
-	int err;
-
-	err = 0;
-	write_seqlock(&rename_lock);
-	spin_lock(&dentry->d_lock);
-	if (do_include
-	    && dentry->d_count
-	    && (!test || test(dentry, arg)))
-		err = au_dpages_append(dpages, dentry, GFP_ATOMIC);
-	spin_unlock(&dentry->d_lock);
-	if (unlikely(err))
-		goto out;
-
-	/*
-	 * vfsmount_lock is unnecessary since this is a traverse in a single
-	 * mount
-	 */
-	while (!IS_ROOT(dentry)) {
-		dentry = dentry->d_parent; /* rename_lock is locked */
-		spin_lock(&dentry->d_lock);
-		if (dentry->d_count
-		    && (!test || test(dentry, arg)))
-			err = au_dpages_append(dpages, dentry, GFP_ATOMIC);
-		spin_unlock(&dentry->d_lock);
-		if (unlikely(err))
-			break;
-	}
-
-out:
-	write_sequnlock(&rename_lock);
-	return err;
-}
-
-static inline int au_dcsub_dpages_aufs(struct dentry *dentry, void *arg)
-{
-	return au_di(dentry) && dentry->d_sb == arg;
-}
-
-int au_dcsub_pages_rev_aufs(struct au_dcsub_pages *dpages,
-			    struct dentry *dentry, int do_include)
-{
-	return au_dcsub_pages_rev(dpages, dentry, do_include,
-				  au_dcsub_dpages_aufs, dentry->d_sb);
-}
-
-int au_test_subdir(struct dentry *d1, struct dentry *d2)
-{
-	struct path path[2] = {
-		{
-			.dentry = d1
-		},
-		{
-			.dentry = d2
-		}
-	};
-
-	return path_is_under(path + 0, path + 1);
-}

recipes-kernel/linux/linux/fs/aufs/dcsub.h

@@ -1,94 +0,0 @@
-/*
- * Copyright (C) 2005-2012 Junjiro R. Okajima
- *
- * This program, aufs is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-/*
- * sub-routines for dentry cache
- */
-
-#ifndef __AUFS_DCSUB_H__
-#define __AUFS_DCSUB_H__
-
-#ifdef __KERNEL__
-
-#include <linux/dcache.h>
-#include <linux/fs.h>
-
-struct dentry;
-
-struct au_dpage {
-	int ndentry;
-	struct dentry **dentries;
-};
-
-struct au_dcsub_pages {
-	int ndpage;
-	struct au_dpage *dpages;
-};
-
-/* ---------------------------------------------------------------------- */
-
-/* dcsub.c */
-int au_dpages_init(struct au_dcsub_pages *dpages, gfp_t gfp);
-void au_dpages_free(struct au_dcsub_pages *dpages);
-typedef int (*au_dpages_test)(struct dentry *dentry, void *arg);
-int au_dcsub_pages(struct au_dcsub_pages *dpages, struct dentry *root,
-		   au_dpages_test test, void *arg);
-int au_dcsub_pages_rev(struct au_dcsub_pages *dpages, struct dentry *dentry,
-		       int do_include, au_dpages_test test, void *arg);
-int au_dcsub_pages_rev_aufs(struct au_dcsub_pages *dpages,
-			    struct dentry *dentry, int do_include);
-int au_test_subdir(struct dentry *d1, struct dentry *d2);
-
-/* ---------------------------------------------------------------------- */
-
-static inline int au_d_hashed_positive(struct dentry *d)
-{
-	int err;
-	struct inode *inode = d->d_inode;
-	err = 0;
-	if (unlikely(d_unhashed(d) || !inode || !inode->i_nlink))
-		err = -ENOENT;
-	return err;
-}
-
-static inline int au_d_alive(struct dentry *d)
-{
-	int err;
-	struct inode *inode;
-	err = 0;
-	if (!IS_ROOT(d))
-		err = au_d_hashed_positive(d);
-	else {
-		inode = d->d_inode;
-		if (unlikely(d_unlinked(d) || !inode || !inode->i_nlink))
-			err = -ENOENT;
-	}
-	return err;
-}
-
-static inline int au_alive_dir(struct dentry *d)
-{
-	int err;
-	err = au_d_alive(d);
-	if (unlikely(err || IS_DEADDIR(d->d_inode)))
-		err = -ENOENT;
-	return err;
-}
-
-#endif /* __KERNEL__ */
-#endif /* __AUFS_DCSUB_H__ */

recipes-kernel/linux/linux/fs/aufs/debug.c

@@ -1,489 +0,0 @@
-/*
- * Copyright (C) 2005-2012 Junjiro R. Okajima
- *
- * This program, aufs is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-/*
- * debug print functions
- */
-
-#include <linux/vt_kern.h>
-#include "aufs.h"
-
-int aufs_debug;
-MODULE_PARM_DESC(debug, "debug print");
-module_param_named(debug, aufs_debug, int, S_IRUGO | S_IWUSR | S_IWGRP);
-
-char *au_plevel = KERN_DEBUG;
-#define dpri(fmt, ...) do {					\
-	if ((au_plevel						\
-	     && strcmp(au_plevel, KERN_DEBUG))			\
-	    || au_debug_test())					\
-		printk("%s" fmt, au_plevel, ##__VA_ARGS__);	\
-} while (0)
-
-/* ---------------------------------------------------------------------- */
-
-void au_dpri_whlist(struct au_nhash *whlist)
-{
-	unsigned long ul, n;
-	struct hlist_head *head;
-	struct au_vdir_wh *tpos;
-	struct hlist_node *pos;
-
-	n = whlist->nh_num;
-	head = whlist->nh_head;
-	for (ul = 0; ul < n; ul++) {
-		hlist_for_each_entry(tpos, pos, head, wh_hash)
-			dpri("b%d, %.*s, %d\n",
-			     tpos->wh_bindex,
-			     tpos->wh_str.len, tpos->wh_str.name,
-			     tpos->wh_str.len);
-		head++;
-	}
-}
-
-void au_dpri_vdir(struct au_vdir *vdir)
-{
-	unsigned long ul;
-	union au_vdir_deblk_p p;
-	unsigned char *o;
-
-	if (!vdir || IS_ERR(vdir)) {
-		dpri("err %ld\n", PTR_ERR(vdir));
-		return;
-	}
-
-	dpri("deblk %u, nblk %lu, deblk %p, last{%lu, %p}, ver %lu\n",
-	     vdir->vd_deblk_sz, vdir->vd_nblk, vdir->vd_deblk,
-	     vdir->vd_last.ul, vdir->vd_last.p.deblk, vdir->vd_version);
-	for (ul = 0; ul < vdir->vd_nblk; ul++) {
-		p.deblk = vdir->vd_deblk[ul];
-		o = p.deblk;
-		dpri("[%lu]: %p\n", ul, o);
-	}
-}
-
-static int do_pri_inode(aufs_bindex_t bindex, struct inode *inode, int hn,
-			struct dentry *wh)
-{
-	char *n = NULL;
-	int l = 0;
-
-	if (!inode || IS_ERR(inode)) {
-		dpri("i%d: err %ld\n", bindex, PTR_ERR(inode));
-		return -1;
-	}
-
-	/* the type of i_blocks depends upon CONFIG_LSF */
-	BUILD_BUG_ON(sizeof(inode->i_blocks) != sizeof(unsigned long)
-		     && sizeof(inode->i_blocks) != sizeof(u64));
-	if (wh) {
-		n = (void *)wh->d_name.name;
-		l = wh->d_name.len;
-	}
-
-	dpri("i%d: %p, i%lu, %s, cnt %d, nl %u, 0%o, sz %llu, blk %llu,"
-	     " hn %d, ct %lld, np %lu, st 0x%lx, f 0x%x, v %llu, g %x%s%.*s\n",
-	     bindex, inode,
-	     inode->i_ino, inode->i_sb ? au_sbtype(inode->i_sb) : "??",
-	     atomic_read(&inode->i_count), inode->i_nlink, inode->i_mode,
-	     i_size_read(inode), (unsigned long long)inode->i_blocks,
-	     hn, (long long)timespec_to_ns(&inode->i_ctime) & 0x0ffff,
-	     inode->i_mapping ? inode->i_mapping->nrpages : 0,
-	     inode->i_state, inode->i_flags, inode->i_version,
-	     inode->i_generation,
-	     l ? ", wh " : "", l, n);
-	return 0;
-}
-
-void au_dpri_inode(struct inode *inode)
-{
-	struct au_iinfo *iinfo;
-	aufs_bindex_t bindex;
-	int err, hn;
-
-	err = do_pri_inode(-1, inode, -1, NULL);
-	if (err || !au_test_aufs(inode->i_sb))
-		return;
-
-	iinfo = au_ii(inode);
-	if (!iinfo)
-		return;
-	dpri("i-1: bstart %d, bend %d, gen %d\n",
-	     iinfo->ii_bstart, iinfo->ii_bend, au_iigen(inode));
-	if (iinfo->ii_bstart < 0)
-		return;
-	hn = 0;
-	for (bindex = iinfo->ii_bstart; bindex <= iinfo->ii_bend; bindex++) {
-		hn = !!au_hn(iinfo->ii_hinode + bindex);
-		do_pri_inode(bindex, iinfo->ii_hinode[0 + bindex].hi_inode, hn,
-			     iinfo->ii_hinode[0 + bindex].hi_whdentry);
-	}
-}
-
-void au_dpri_dalias(struct inode *inode)
-{
-	struct dentry *d;
-
-	spin_lock(&inode->i_lock);
-	list_for_each_entry(d, &inode->i_dentry, d_alias)
-		au_dpri_dentry(d);
-	spin_unlock(&inode->i_lock);
-}
-
-static int do_pri_dentry(aufs_bindex_t bindex, struct dentry *dentry)
-{
-	struct dentry *wh = NULL;
-	int hn;
-
-	if (!dentry || IS_ERR(dentry)) {
-		dpri("d%d: err %ld\n", bindex, PTR_ERR(dentry));
-		return -1;
-	}
-	/* do not call dget_parent() here */
-	/* note: access d_xxx without d_lock */
-	dpri("d%d: %.*s?/%.*s, %s, cnt %d, flags 0x%x\n",
-	     bindex,
-	     AuDLNPair(dentry->d_parent), AuDLNPair(dentry),
-	     dentry->d_sb ? au_sbtype(dentry->d_sb) : "??",
-	     dentry->d_count, dentry->d_flags);
-	hn = -1;
-	if (bindex >= 0 && dentry->d_inode && au_test_aufs(dentry->d_sb)) {
-		struct au_iinfo *iinfo = au_ii(dentry->d_inode);
-		if (iinfo) {
-			hn = !!au_hn(iinfo->ii_hinode + bindex);
-			wh = iinfo->ii_hinode[0 + bindex].hi_whdentry;
-		}
-	}
-	do_pri_inode(bindex, dentry->d_inode, hn, wh);
-	return 0;
-}
-
-void au_dpri_dentry(struct dentry *dentry)
-{
-	struct au_dinfo *dinfo;
-	aufs_bindex_t bindex;
-	int err;
-	struct au_hdentry *hdp;
-
-	err = do_pri_dentry(-1, dentry);
-	if (err || !au_test_aufs(dentry->d_sb))
-		return;
-
-	dinfo = au_di(dentry);
-	if (!dinfo)
-		return;
-	dpri("d-1: bstart %d, bend %d, bwh %d, bdiropq %d, gen %d\n",
-	     dinfo->di_bstart, dinfo->di_bend,
-	     dinfo->di_bwh, dinfo->di_bdiropq, au_digen(dentry));
-	if (dinfo->di_bstart < 0)
-		return;
-	hdp = dinfo->di_hdentry;
-	for (bindex = dinfo->di_bstart; bindex <= dinfo->di_bend; bindex++)
-		do_pri_dentry(bindex, hdp[0 + bindex].hd_dentry);
-}
-
-static int do_pri_file(aufs_bindex_t bindex, struct file *file)
-{
-	char a[32];
-
-	if (!file || IS_ERR(file)) {
-		dpri("f%d: err %ld\n", bindex, PTR_ERR(file));
-		return -1;
-	}
-	a[0] = 0;
-	if (bindex < 0
-	    && file->f_dentry
-	    && au_test_aufs(file->f_dentry->d_sb)
-	    && au_fi(file))
-		snprintf(a, sizeof(a), ", gen %d, mmapped %d",
-			 au_figen(file), atomic_read(&au_fi(file)->fi_mmapped));
-	dpri("f%d: mode 0x%x, flags 0%o, cnt %ld, v %llu, pos %llu%s\n",
-	     bindex, file->f_mode, file->f_flags, (long)file_count(file),
-	     file->f_version, file->f_pos, a);
-	if (file->f_dentry)
-		do_pri_dentry(bindex, file->f_dentry);
-	return 0;
-}
-
-void au_dpri_file(struct file *file)
-{
-	struct au_finfo *finfo;
-	struct au_fidir *fidir;
-	struct au_hfile *hfile;
-	aufs_bindex_t bindex;
-	int err;
-
-	err = do_pri_file(-1, file);
-	if (err || !file->f_dentry || !au_test_aufs(file->f_dentry->d_sb))
-		return;
-
-	finfo = au_fi(file);
-	if (!finfo)
-		return;
-	if (finfo->fi_btop < 0)
-		return;
-	fidir = finfo->fi_hdir;
-	if (!fidir)
-		do_pri_file(finfo->fi_btop, finfo->fi_htop.hf_file);
-	else
-		for (bindex = finfo->fi_btop;
-		     bindex >= 0 && bindex <= fidir->fd_bbot;
-		     bindex++) {
-			hfile = fidir->fd_hfile + bindex;
-			do_pri_file(bindex, hfile ? hfile->hf_file : NULL);
-		}
-}
-
-static int do_pri_br(aufs_bindex_t bindex, struct au_branch *br)
-{
-	struct vfsmount *mnt;
-	struct super_block *sb;
-
-	if (!br || IS_ERR(br))
-		goto out;
-	mnt = br->br_mnt;
-	if (!mnt || IS_ERR(mnt))
-		goto out;
-	sb = mnt->mnt_sb;
-	if (!sb || IS_ERR(sb))
-		goto out;
-
-	dpri("s%d: {perm 0x%x, id %d, cnt %d, wbr %p}, "
-	     "%s, dev 0x%02x%02x, flags 0x%lx, cnt %d, active %d, "
-	     "xino %d\n",
-	     bindex, br->br_perm, br->br_id, atomic_read(&br->br_count),
-	     br->br_wbr, au_sbtype(sb), MAJOR(sb->s_dev), MINOR(sb->s_dev),
-	     sb->s_flags, sb->s_count,
-	     atomic_read(&sb->s_active), !!br->br_xino.xi_file);
-	return 0;
-
-out:
-	dpri("s%d: err %ld\n", bindex, PTR_ERR(br));
-	return -1;
-}
-
-void au_dpri_sb(struct super_block *sb)
-{
-	struct au_sbinfo *sbinfo;
-	aufs_bindex_t bindex;
-	int err;
-	/* to reuduce stack size */
-	struct {
-		struct vfsmount mnt;
-		struct au_branch fake;
-	} *a;
-
-	/* this function can be called from magic sysrq */
-	a = kzalloc(sizeof(*a), GFP_ATOMIC);
-	if (unlikely(!a)) {
-		dpri("no memory\n");
-		return;
-	}
-
-	a->mnt.mnt_sb = sb;
-	a->fake.br_perm = 0;
-	a->fake.br_mnt = &a->mnt;
-	a->fake.br_xino.xi_file = NULL;
-	atomic_set(&a->fake.br_count, 0);
-	smp_mb(); /* atomic_set */
-	err = do_pri_br(-1, &a->fake);
-	kfree(a);
-	dpri("dev 0x%x\n", sb->s_dev);
-	if (err || !au_test_aufs(sb))
-		return;
-
-	sbinfo = au_sbi(sb);
-	if (!sbinfo)
-		return;
-	dpri("nw %d, gen %u, kobj %d\n",
-	     atomic_read(&sbinfo->si_nowait.nw_len), sbinfo->si_generation,
-	     atomic_read(&sbinfo->si_kobj.kref.refcount));
-	for (bindex = 0; bindex <= sbinfo->si_bend; bindex++)
-		do_pri_br(bindex, sbinfo->si_branch[0 + bindex]);
-}
-
-/* ---------------------------------------------------------------------- */
-
-void au_dbg_sleep_jiffy(int jiffy)
-{
-	while (jiffy)
-		jiffy = schedule_timeout_uninterruptible(jiffy);
-}
-
-void au_dbg_iattr(struct iattr *ia)
-{
-#define AuBit(name)	if (ia->ia_valid & ATTR_ ## name) \
-				dpri(#name "\n")
-	AuBit(MODE);
-	AuBit(UID);
-	AuBit(GID);
-	AuBit(SIZE);
-	AuBit(ATIME);
-	AuBit(MTIME);
-	AuBit(CTIME);
-	AuBit(ATIME_SET);
-	AuBit(MTIME_SET);
-	AuBit(FORCE);
-	AuBit(ATTR_FLAG);
-	AuBit(KILL_SUID);
-	AuBit(KILL_SGID);
-	AuBit(FILE);
-	AuBit(KILL_PRIV);
-	AuBit(OPEN);
-	AuBit(TIMES_SET);
-#undef	AuBit
-	dpri("ia_file %p\n", ia->ia_file);
-}
-
-/* ---------------------------------------------------------------------- */
-
-void __au_dbg_verify_dinode(struct dentry *dentry, const char *func, int line)
-{
-	struct inode *h_inode, *inode = dentry->d_inode;
-	struct dentry *h_dentry;
-	aufs_bindex_t bindex, bend, bi;
-
-	if (!inode /* || au_di(dentry)->di_lsc == AuLsc_DI_TMP */)
-		return;
-
-	bend = au_dbend(dentry);
-	bi = au_ibend(inode);
-	if (bi < bend)
-		bend = bi;
-	bindex = au_dbstart(dentry);
-	bi = au_ibstart(inode);
-	if (bi > bindex)
-		bindex = bi;
-
-	for (; bindex <= bend; bindex++) {
-		h_dentry = au_h_dptr(dentry, bindex);
-		if (!h_dentry)
-			continue;
-		h_inode = au_h_iptr(inode, bindex);
-		if (unlikely(h_inode != h_dentry->d_inode)) {
-			int old = au_debug_test();
-			if (!old)
-				au_debug(1);
-			AuDbg("b%d, %s:%d\n", bindex, func, line);
-			AuDbgDentry(dentry);
-			AuDbgInode(inode);
-			if (!old)
-				au_debug(0);
-			BUG();
-		}
-	}
-}
-
-void au_dbg_verify_dir_parent(struct dentry *dentry, unsigned int sigen)
-{
-	struct dentry *parent;
-
-	parent = dget_parent(dentry);
-	AuDebugOn(!S_ISDIR(dentry->d_inode->i_mode));
-	AuDebugOn(IS_ROOT(dentry));
-	AuDebugOn(au_digen_test(parent, sigen));
-	dput(parent);
-}
-
-void au_dbg_verify_nondir_parent(struct dentry *dentry, unsigned int sigen)
-{
-	struct dentry *parent;
-	struct inode *inode;
-
-	parent = dget_parent(dentry);
-	inode = dentry->d_inode;
-	AuDebugOn(inode && S_ISDIR(dentry->d_inode->i_mode));
-	AuDebugOn(au_digen_test(parent, sigen));
-	dput(parent);
-}
-
-void au_dbg_verify_gen(struct dentry *parent, unsigned int sigen)
-{
-	int err, i, j;
-	struct au_dcsub_pages dpages;
-	struct au_dpage *dpage;
-	struct dentry **dentries;
-
-	err = au_dpages_init(&dpages, GFP_NOFS);
-	AuDebugOn(err);
-	err = au_dcsub_pages_rev_aufs(&dpages, parent, /*do_include*/1);
-	AuDebugOn(err);
-	for (i = dpages.ndpage - 1; !err && i >= 0; i--) {
-		dpage = dpages.dpages + i;
-		dentries = dpage->dentries;
-		for (j = dpage->ndentry - 1; !err && j >= 0; j--)
-			AuDebugOn(au_digen_test(dentries[j], sigen));
-	}
-	au_dpages_free(&dpages);
-}
-
-void au_dbg_verify_kthread(void)
-{
-	if (au_wkq_test()) {
-		au_dbg_blocked();
-		/*
-		 * It may be recursive, but udba=notify between two aufs mounts,
-		 * where a single ro branch is shared, is not a problem.
-		 */
-		/* WARN_ON(1); */
-	}
-}
-
-/* ---------------------------------------------------------------------- */
-
-void au_debug_sbinfo_init(struct au_sbinfo *sbinfo __maybe_unused)
-{
-#ifdef AuForceNoPlink
-	au_opt_clr(sbinfo->si_mntflags, PLINK);
-#endif
-#ifdef AuForceNoXino
-	au_opt_clr(sbinfo->si_mntflags, XINO);
-#endif
-#ifdef AuForceNoRefrof
-	au_opt_clr(sbinfo->si_mntflags, REFROF);
-#endif
-#ifdef AuForceHnotify
-	au_opt_set_udba(sbinfo->si_mntflags, UDBA_HNOTIFY);
-#endif
-#ifdef AuForceRd0
-	sbinfo->si_rdblk = 0;
-	sbinfo->si_rdhash = 0;
-#endif
-}
-
-int __init au_debug_init(void)
-{
-	aufs_bindex_t bindex;
-	struct au_vdir_destr destr;
-
-	bindex = -1;
-	AuDebugOn(bindex >= 0);
-
-	destr.len = -1;
-	AuDebugOn(destr.len < NAME_MAX);
-
-#ifdef CONFIG_4KSTACKS
-	pr_warn("CONFIG_4KSTACKS is defined.\n");
-#endif
-
-#ifdef AuForceNoBrs
-	sysaufs_brs = 0;
-#endif
-
-	return 0;
-}

recipes-kernel/linux/linux/fs/aufs/debug.h

@@ -1,243 +0,0 @@
-/*
- * Copyright (C) 2005-2012 Junjiro R. Okajima
- *
- * This program, aufs is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-/*
- * debug print functions
- */
-
-#ifndef __AUFS_DEBUG_H__
-#define __AUFS_DEBUG_H__
-
-#ifdef __KERNEL__
-
-#include <asm/system.h>
-#include <linux/module.h>
-#include <linux/kallsyms.h>
-#include <linux/sysrq.h>
-
-#ifdef CONFIG_AUFS_DEBUG
-#define AuDebugOn(a)		BUG_ON(a)
-
-/* module parameter */
-extern int aufs_debug;
-static inline void au_debug(int n)
-{
-	aufs_debug = n;
-	smp_mb();
-}
-
-static inline int au_debug_test(void)
-{
-	return aufs_debug;
-}
-#else
-#define AuDebugOn(a)		do {} while (0)
-AuStubVoid(au_debug, int n)
-AuStubInt0(au_debug_test, void)
-#endif /* CONFIG_AUFS_DEBUG */
-
-/* ---------------------------------------------------------------------- */
-
-/* debug print */
-
-#define AuDbg(fmt, ...) do { \
-	if (au_debug_test()) \
-		pr_debug("DEBUG: " fmt, ##__VA_ARGS__); \
-} while (0)
-#define AuLabel(l)		AuDbg(#l "\n")
-#define AuIOErr(fmt, ...)	pr_err("I/O Error, " fmt, ##__VA_ARGS__)
-#define AuWarn1(fmt, ...) do { \
-	static unsigned char _c; \
-	if (!_c++) \
-		pr_warn(fmt, ##__VA_ARGS__); \
-} while (0)
-
-#define AuErr1(fmt, ...) do { \
-	static unsigned char _c; \
-	if (!_c++) \
-		pr_err(fmt, ##__VA_ARGS__); \
-} while (0)
-
-#define AuIOErr1(fmt, ...) do { \
-	static unsigned char _c; \
-	if (!_c++) \
-		AuIOErr(fmt, ##__VA_ARGS__); \
-} while (0)
-
-#define AuUnsupportMsg	"This operation is not supported." \
-			" Please report this application to aufs-users ML."
-#define AuUnsupport(fmt, ...) do { \
-	pr_err(AuUnsupportMsg "\n" fmt, ##__VA_ARGS__); \
-	dump_stack(); \
-} while (0)
-
-#define AuTraceErr(e) do { \
-	if (unlikely((e) < 0)) \
-		AuDbg("err %d\n", (int)(e)); \
-} while (0)
-
-#define AuTraceErrPtr(p) do { \
-	if (IS_ERR(p)) \
-		AuDbg("err %ld\n", PTR_ERR(p)); \
-} while (0)
-
-/* dirty macros for debug print, use with "%.*s" and caution */
-#define AuLNPair(qstr)		(qstr)->len, (qstr)->name
-#define AuDLNPair(d)		AuLNPair(&(d)->d_name)
-
-/* ---------------------------------------------------------------------- */
-
-struct au_sbinfo;
-struct au_finfo;
-struct dentry;
-#ifdef CONFIG_AUFS_DEBUG
-extern char *au_plevel;
-struct au_nhash;
-void au_dpri_whlist(struct au_nhash *whlist);
-struct au_vdir;
-void au_dpri_vdir(struct au_vdir *vdir);
-struct inode;
-void au_dpri_inode(struct inode *inode);
-void au_dpri_dalias(struct inode *inode);
-void au_dpri_dentry(struct dentry *dentry);
-struct file;
-void au_dpri_file(struct file *filp);
-struct super_block;
-void au_dpri_sb(struct super_block *sb);
-
-void au_dbg_sleep_jiffy(int jiffy);
-struct iattr;
-void au_dbg_iattr(struct iattr *ia);
-
-#define au_dbg_verify_dinode(d) __au_dbg_verify_dinode(d, __func__, __LINE__)
-void __au_dbg_verify_dinode(struct dentry *dentry, const char *func, int line);
-void au_dbg_verify_dir_parent(struct dentry *dentry, unsigned int sigen);
-void au_dbg_verify_nondir_parent(struct dentry *dentry, unsigned int sigen);
-void au_dbg_verify_gen(struct dentry *parent, unsigned int sigen);
-void au_dbg_verify_kthread(void);
-
-int __init au_debug_init(void);
-void au_debug_sbinfo_init(struct au_sbinfo *sbinfo);
-#define AuDbgWhlist(w) do { \
-	AuDbg(#w "\n"); \
-	au_dpri_whlist(w); \
-} while (0)
-
-#define AuDbgVdir(v) do { \
-	AuDbg(#v "\n"); \
-	au_dpri_vdir(v); \
-} while (0)
-
-#define AuDbgInode(i) do { \
-	AuDbg(#i "\n"); \
-	au_dpri_inode(i); \
-} while (0)
-
-#define AuDbgDAlias(i) do { \
-	AuDbg(#i "\n"); \
-	au_dpri_dalias(i); \
-} while (0)
-
-#define AuDbgDentry(d) do { \
-	AuDbg(#d "\n"); \
-	au_dpri_dentry(d); \
-} while (0)
-
-#define AuDbgFile(f) do { \
-	AuDbg(#f "\n"); \
-	au_dpri_file(f); \
-} while (0)
-
-#define AuDbgSb(sb) do { \
-	AuDbg(#sb "\n"); \
-	au_dpri_sb(sb); \
-} while (0)
-
-#define AuDbgSleep(sec) do { \
-	AuDbg("sleep %d sec\n", sec); \
-	ssleep(sec); \
-} while (0)
-
-#define AuDbgSleepJiffy(jiffy) do { \
-	AuDbg("sleep %d jiffies\n", jiffy); \
-	au_dbg_sleep_jiffy(jiffy); \
-} while (0)
-
-#define AuDbgIAttr(ia) do { \
-	AuDbg("ia_valid 0x%x\n", (ia)->ia_valid); \
-	au_dbg_iattr(ia); \
-} while (0)
-
-#define AuDbgSym(addr) do {				\
-	char sym[KSYM_SYMBOL_LEN];			\
-	sprint_symbol(sym, (unsigned long)addr);	\
-	AuDbg("%s\n", sym);				\
-} while (0)
-
-#define AuInfoSym(addr) do {				\
-	char sym[KSYM_SYMBOL_LEN];			\
-	sprint_symbol(sym, (unsigned long)addr);	\
-	AuInfo("%s\n", sym);				\
-} while (0)
-#else
-AuStubVoid(au_dbg_verify_dinode, struct dentry *dentry)
-AuStubVoid(au_dbg_verify_dir_parent, struct dentry *dentry, unsigned int sigen)
-AuStubVoid(au_dbg_verify_nondir_parent, struct dentry *dentry,
-	   unsigned int sigen)
-AuStubVoid(au_dbg_verify_gen, struct dentry *parent, unsigned int sigen)
-AuStubVoid(au_dbg_verify_kthread, void)
-AuStubInt0(__init au_debug_init, void)
-AuStubVoid(au_debug_sbinfo_init, struct au_sbinfo *sbinfo)
-
-#define AuDbgWhlist(w)		do {} while (0)
-#define AuDbgVdir(v)		do {} while (0)
-#define AuDbgInode(i)		do {} while (0)
-#define AuDbgDAlias(i)		do {} while (0)
-#define AuDbgDentry(d)		do {} while (0)
-#define AuDbgFile(f)		do {} while (0)
-#define AuDbgSb(sb)		do {} while (0)
-#define AuDbgSleep(sec)		do {} while (0)
-#define AuDbgSleepJiffy(jiffy)	do {} while (0)
-#define AuDbgIAttr(ia)		do {} while (0)
-#define AuDbgSym(addr)		do {} while (0)
-#define AuInfoSym(addr)		do {} while (0)
-#endif /* CONFIG_AUFS_DEBUG */
-
-/* ---------------------------------------------------------------------- */
-
-#ifdef CONFIG_AUFS_MAGIC_SYSRQ
-int __init au_sysrq_init(void);
-void au_sysrq_fin(void);
-
-#ifdef CONFIG_HW_CONSOLE
-#define au_dbg_blocked() do { \
-	WARN_ON(1); \
-	handle_sysrq('w'); \
-} while (0)
-#else
-AuStubVoid(au_dbg_blocked, void)
-#endif
-
-#else
-AuStubInt0(__init au_sysrq_init, void)
-AuStubVoid(au_sysrq_fin, void)
-AuStubVoid(au_dbg_blocked, void)
-#endif /* CONFIG_AUFS_MAGIC_SYSRQ */
-
-#endif /* __KERNEL__ */
-#endif /* __AUFS_DEBUG_H__ */

recipes-kernel/linux/linux/fs/aufs/dentry.h

@@ -1,237 +0,0 @@
-/*
- * Copyright (C) 2005-2012 Junjiro R. Okajima
- *
- * This program, aufs is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-/*
- * lookup and dentry operations
- */
-
-#ifndef __AUFS_DENTRY_H__
-#define __AUFS_DENTRY_H__
-
-#ifdef __KERNEL__
-
-#include <linux/dcache.h>
-#include "rwsem.h"
-
-struct au_hdentry {
-	struct dentry		*hd_dentry;
-	aufs_bindex_t		hd_id;
-};
-
-struct au_dinfo {
-	atomic_t		di_generation;
-
-	struct au_rwsem		di_rwsem;
-	aufs_bindex_t		di_bstart, di_bend, di_bwh, di_bdiropq;
-	struct au_hdentry	*di_hdentry;
-} ____cacheline_aligned_in_smp;
-
-/* ---------------------------------------------------------------------- */
-
-/* dentry.c */
-extern const struct dentry_operations aufs_dop;
-struct au_branch;
-struct dentry *au_lkup_one(struct qstr *name, struct dentry *h_parent,
-			   struct au_branch *br, struct nameidata *nd);
-struct dentry *au_sio_lkup_one(struct qstr *name, struct dentry *parent,
-			       struct au_branch *br);
-int au_h_verify(struct dentry *h_dentry, unsigned int udba, struct inode *h_dir,
-		struct dentry *h_parent, struct au_branch *br);
-
-int au_lkup_dentry(struct dentry *dentry, aufs_bindex_t bstart, mode_t type,
-		   struct nameidata *nd);
-int au_lkup_neg(struct dentry *dentry, aufs_bindex_t bindex);
-int au_refresh_dentry(struct dentry *dentry, struct dentry *parent);
-int au_reval_dpath(struct dentry *dentry, unsigned int sigen);
-
-/* dinfo.c */
-void au_di_init_once(void *_di);
-struct au_dinfo *au_di_alloc(struct super_block *sb, unsigned int lsc);
-void au_di_free(struct au_dinfo *dinfo);
-void au_di_swap(struct au_dinfo *a, struct au_dinfo *b);
-void au_di_cp(struct au_dinfo *dst, struct au_dinfo *src);
-int au_di_init(struct dentry *dentry);
-void au_di_fin(struct dentry *dentry);
-int au_di_realloc(struct au_dinfo *dinfo, int nbr);
-
-void di_read_lock(struct dentry *d, int flags, unsigned int lsc);
-void di_read_unlock(struct dentry *d, int flags);
-void di_downgrade_lock(struct dentry *d, int flags);
-void di_write_lock(struct dentry *d, unsigned int lsc);
-void di_write_unlock(struct dentry *d);
-void di_write_lock2_child(struct dentry *d1, struct dentry *d2, int isdir);
-void di_write_lock2_parent(struct dentry *d1, struct dentry *d2, int isdir);
-void di_write_unlock2(struct dentry *d1, struct dentry *d2);
-
-struct dentry *au_h_dptr(struct dentry *dentry, aufs_bindex_t bindex);
-struct dentry *au_h_d_alias(struct dentry *dentry, aufs_bindex_t bindex);
-aufs_bindex_t au_dbtail(struct dentry *dentry);
-aufs_bindex_t au_dbtaildir(struct dentry *dentry);
-
-void au_set_h_dptr(struct dentry *dentry, aufs_bindex_t bindex,
-		   struct dentry *h_dentry);
-int au_digen_test(struct dentry *dentry, unsigned int sigen);
-int au_dbrange_test(struct dentry *dentry);
-void au_update_digen(struct dentry *dentry);
-void au_update_dbrange(struct dentry *dentry, int do_put_zero);
-void au_update_dbstart(struct dentry *dentry);
-void au_update_dbend(struct dentry *dentry);
-int au_find_dbindex(struct dentry *dentry, struct dentry *h_dentry);
-
-/* ---------------------------------------------------------------------- */
-
-static inline struct au_dinfo *au_di(struct dentry *dentry)
-{
-	return dentry->d_fsdata;
-}
-
-/* ---------------------------------------------------------------------- */
-
-/* lock subclass for dinfo */
-enum {
-	AuLsc_DI_CHILD,		/* child first */
-	AuLsc_DI_CHILD2,	/* rename(2), link(2), and cpup at hnotify */
-	AuLsc_DI_CHILD3,	/* copyup dirs */
-	AuLsc_DI_PARENT,
-	AuLsc_DI_PARENT2,
-	AuLsc_DI_PARENT3,
-	AuLsc_DI_TMP		/* temp for replacing dinfo */
-};
-
-/*
- * di_read_lock_child, di_write_lock_child,
- * di_read_lock_child2, di_write_lock_child2,
- * di_read_lock_child3, di_write_lock_child3,
- * di_read_lock_parent, di_write_lock_parent,
- * di_read_lock_parent2, di_write_lock_parent2,
- * di_read_lock_parent3, di_write_lock_parent3,
- */
-#define AuReadLockFunc(name, lsc) \
-static inline void di_read_lock_##name(struct dentry *d, int flags) \
-{ di_read_lock(d, flags, AuLsc_DI_##lsc); }
-
-#define AuWriteLockFunc(name, lsc) \
-static inline void di_write_lock_##name(struct dentry *d) \
-{ di_write_lock(d, AuLsc_DI_##lsc); }
-
-#define AuRWLockFuncs(name, lsc) \
-	AuReadLockFunc(name, lsc) \
-	AuWriteLockFunc(name, lsc)
-
-AuRWLockFuncs(child, CHILD);
-AuRWLockFuncs(child2, CHILD2);
-AuRWLockFuncs(child3, CHILD3);
-AuRWLockFuncs(parent, PARENT);
-AuRWLockFuncs(parent2, PARENT2);
-AuRWLockFuncs(parent3, PARENT3);
-
-#undef AuReadLockFunc
-#undef AuWriteLockFunc
-#undef AuRWLockFuncs
-
-#define DiMustNoWaiters(d)	AuRwMustNoWaiters(&au_di(d)->di_rwsem)
-#define DiMustAnyLock(d)	AuRwMustAnyLock(&au_di(d)->di_rwsem)
-#define DiMustWriteLock(d)	AuRwMustWriteLock(&au_di(d)->di_rwsem)
-
-/* ---------------------------------------------------------------------- */
-
-/* todo: memory barrier? */
-static inline unsigned int au_digen(struct dentry *d)
-{
-	return atomic_read(&au_di(d)->di_generation);
-}
-
-static inline void au_h_dentry_init(struct au_hdentry *hdentry)
-{
-	hdentry->hd_dentry = NULL;
-}
-
-static inline void au_hdput(struct au_hdentry *hd)
-{
-	if (hd)
-		dput(hd->hd_dentry);
-}
-
-static inline aufs_bindex_t au_dbstart(struct dentry *dentry)
-{
-	DiMustAnyLock(dentry);
-	return au_di(dentry)->di_bstart;
-}
-
-static inline aufs_bindex_t au_dbend(struct dentry *dentry)
-{
-	DiMustAnyLock(dentry);
-	return au_di(dentry)->di_bend;
-}
-
-static inline aufs_bindex_t au_dbwh(struct dentry *dentry)
-{
-	DiMustAnyLock(dentry);
-	return au_di(dentry)->di_bwh;
-}
-
-static inline aufs_bindex_t au_dbdiropq(struct dentry *dentry)
-{
-	DiMustAnyLock(dentry);
-	return au_di(dentry)->di_bdiropq;
-}
-
-/* todo: hard/soft set? */
-static inline void au_set_dbstart(struct dentry *dentry, aufs_bindex_t bindex)
-{
-	DiMustWriteLock(dentry);
-	au_di(dentry)->di_bstart = bindex;
-}
-
-static inline void au_set_dbend(struct dentry *dentry, aufs_bindex_t bindex)
-{
-	DiMustWriteLock(dentry);
-	au_di(dentry)->di_bend = bindex;
-}
-
-static inline void au_set_dbwh(struct dentry *dentry, aufs_bindex_t bindex)
-{
-	DiMustWriteLock(dentry);
-	/* dbwh can be outside of bstart - bend range */
-	au_di(dentry)->di_bwh = bindex;
-}
-
-static inline void au_set_dbdiropq(struct dentry *dentry, aufs_bindex_t bindex)
-{
-	DiMustWriteLock(dentry);
-	au_di(dentry)->di_bdiropq = bindex;
-}
-
-/* ---------------------------------------------------------------------- */
-
-#ifdef CONFIG_AUFS_HNOTIFY
-static inline void au_digen_dec(struct dentry *d)
-{
-	atomic_dec(&au_di(d)->di_generation);
-}
-
-static inline void au_hn_di_reinit(struct dentry *dentry)
-{
-	dentry->d_fsdata = NULL;
-}
-#else
-AuStubVoid(au_hn_di_reinit, struct dentry *dentry __maybe_unused)
-#endif /* CONFIG_AUFS_HNOTIFY */
-
-#endif /* __KERNEL__ */
-#endif /* __AUFS_DENTRY_H__ */

recipes-kernel/linux/linux/fs/aufs/dinfo.c

@@ -1,543 +0,0 @@
-/*
- * Copyright (C) 2005-2012 Junjiro R. Okajima
- *
- * This program, aufs is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-
-/*
- * dentry private data
- */
-
-#include "aufs.h"
-
-void au_di_init_once(void *_dinfo)
-{
-	struct au_dinfo *dinfo = _dinfo;
-	static struct lock_class_key aufs_di;
-
-	au_rw_init(&dinfo->di_rwsem);
-	au_rw_class(&dinfo->di_rwsem, &aufs_di);
-}
-
-struct au_dinfo *au_di_alloc(struct super_block *sb, unsigned int lsc)
-{
-	struct au_dinfo *dinfo;
-	int nbr, i;
-
-	dinfo = au_cache_alloc_dinfo();
-	if (unlikely(!dinfo))
-		goto out;
-
-	nbr = au_sbend(sb) + 1;
-	if (nbr <= 0)
-		nbr = 1;
-	dinfo->di_hdentry = kcalloc(nbr, sizeof(*dinfo->di_hdentry), GFP_NOFS);
-	if (dinfo->di_hdentry) {
-		au_rw_write_lock_nested(&dinfo->di_rwsem, lsc);
-		dinfo->di_bstart = -1;
-		dinfo->di_bend = -1;
-		dinfo->di_bwh = -1;
-		dinfo->di_bdiropq = -1;
-		for (i = 0; i < nbr; i++)
-			dinfo->di_hdentry[i].hd_id = -1;
-		goto out;
-	}
-
-	au_cache_free_dinfo(dinfo);
-	dinfo = NULL;
-
-out:
-	return dinfo;
-}
-
-void au_di_free(struct au_dinfo *dinfo)
-{
-	struct au_hdentry *p;
-	aufs_bindex_t bend, bindex;
-
-	/* dentry may not be revalidated */
-	bindex = dinfo->di_bstart;
-	if (bindex >= 0) {
-		bend = dinfo->di_bend;
-		p = dinfo->di_hdentry + bindex;
-		while (bindex++ <= bend)
-			au_hdput(p++);
-	}
-	kfree(dinfo->di_hdentry);
-	au_cache_free_dinfo(dinfo);
-}
-
-void au_di_swap(struct au_dinfo *a, struct au_dinfo *b)
-{
-	struct au_hdentry *p;
-	aufs_bindex_t bi;
-
-	AuRwMustWriteLock(&a->di_rwsem);
-	AuRwMustWriteLock(&b->di_rwsem);
-
-#define DiSwap(v, name)				\
-	do {					\
-		v = a->di_##name;		\
-		a->di_##name = b->di_##name;	\
-		b->di_##name = v;		\
-	} while (0)
-
-	DiSwap(p, hdentry);
-	DiSwap(bi, bstart);
-	DiSwap(bi, bend);
-	DiSwap(bi, bwh);
-	DiSwap(bi, bdiropq);
-	/* smp_mb(); */
-
-#undef DiSwap
-}
-
-void au_di_cp(struct au_dinfo *dst, struct au_dinfo *src)
-{
-	AuRwMustWriteLock(&dst->di_rwsem);
-	AuRwMustWriteLock(&src->di_rwsem);
-
-	dst->di_bstart = src->di_bstart;
-	dst->di_bend = src->di_bend;
-	dst->di_bwh = src->di_bwh;
-	dst->di_bdiropq = src->di_bdiropq;
-	/* smp_mb(); */
-}
-
-int au_di_init(struct dentry *dentry)
-{
-	int err;
-	struct super_block *sb;
-	struct au_dinfo *dinfo;
-
-	err = 0;
-	sb = dentry->d_sb;
-	dinfo = au_di_alloc(sb, AuLsc_DI_CHILD);
-	if (dinfo) {
-		atomic_set(&dinfo->di_generation, au_sigen(sb));
-		/* smp_mb(); */ /* atomic_set */
-		dentry->d_fsdata = dinfo;
-	} else
-		err = -ENOMEM;
-
-	return err;
-}
-
-void au_di_fin(struct dentry *dentry)
-{
-	struct au_dinfo *dinfo;
-
-	dinfo = au_di(dentry);
-	AuRwDestroy(&dinfo->di_rwsem);
-	au_di_free(dinfo);
-}
-
-int au_di_realloc(struct au_dinfo *dinfo, int nbr)
-{
-	int err, sz;
-	struct au_hdentry *hdp;
-
-	AuRwMustWriteLock(&dinfo->di_rwsem);
-
-	err = -ENOMEM;
-	sz = sizeof(*hdp) * (dinfo->di_bend + 1);
-	if (!sz)
-		sz = sizeof(*hdp);
-	hdp = au_kzrealloc(dinfo->di_hdentry, sz, sizeof(*hdp) * nbr, GFP_NOFS);
-	if (hdp) {
-		dinfo->di_hdentry = hdp;
-		err = 0;
-	}
-
-	return err;
-}
-
-/* ---------------------------------------------------------------------- */
-
-static void do_ii_write_lock(struct inode *inode, unsigned int lsc)
-{
-	switch (lsc) {
-	case AuLsc_DI_CHILD:
-		ii_write_lock_child(inode);
-		break;
-	case AuLsc_DI_CHILD2:
-		ii_write_lock_child2(inode);
-		break;
-	case AuLsc_DI_CHILD3:
-		ii_write_lock_child3(inode);
-		break;
-	case AuLsc_DI_PARENT:
-		ii_write_lock_parent(inode);
-		break;
-	case AuLsc_DI_PARENT2:
-		ii_write_lock_parent2(inode);
-		break;
-	case AuLsc_DI_PARENT3:
-		ii_write_lock_parent3(inode);
-		break;
-	default:
-		BUG();
-	}
-}
-
-static void do_ii_read_lock(struct inode *inode, unsigned int lsc)
-{
-	switch (lsc) {
-	case AuLsc_DI_CHILD:
-		ii_read_lock_child(inode);
-		break;
-	case AuLsc_DI_CHILD2:
-		ii_read_lock_child2(inode);
-		break;
-	case AuLsc_DI_CHILD3:
-		ii_read_lock_child3(inode);
-		break;
-	case AuLsc_DI_PARENT:
-		ii_read_lock_parent(inode);
-		break;
-	case AuLsc_DI_PARENT2:
-		ii_read_lock_parent2(inode);
-		break;
-	case AuLsc_DI_PARENT3:
-		ii_read_lock_parent3(inode);
-		break;
-	default:
-		BUG();
-	}
-}
-
-void di_read_lock(struct dentry *d, int flags, unsigned int lsc)
-{
-	au_rw_read_lock_nested(&au_di(d)->di_rwsem, lsc);
-	if (d->d_inode) {
-		if (au_ftest_lock(flags, IW))
-			do_ii_write_lock(d->d_inode, lsc);
-		else if (au_ftest_lock(flags, IR))
-			do_ii_read_lock(d->d_inode, lsc);
-	}
-}
-
-void di_read_unlock(struct dentry *d, int flags)
-{
-	if (d->d_inode) {
-		if (au_ftest_lock(flags, IW)) {
-			au_dbg_verify_dinode(d);
-			ii_write_unlock(d->d_inode);
-		} else if (au_ftest_lock(flags, IR)) {
-			au_dbg_verify_dinode(d);
-			ii_read_unlock(d->d_inode);
-		}
-	}
-	au_rw_read_unlock(&au_di(d)->di_rwsem);
-}
-
-void di_downgrade_lock(struct dentry *d, int flags)
-{
-	if (d->d_inode && au_ftest_lock(flags, IR))
-		ii_downgrade_lock(d->d_inode);
-	au_rw_dgrade_lock(&au_di(d)->di_rwsem);
-}
-
-void di_write_lock(struct dentry *d, unsigned int lsc)
-{
-	au_rw_write_lock_nested(&au_di(d)->di_rwsem, lsc);
-	if (d->d_inode)
-		do_ii_write_lock(d->d_inode, lsc);
-}
-
-void di_write_unlock(struct dentry *d)
-{
-	au_dbg_verify_dinode(d);
-	if (d->d_inode)
-		ii_write_unlock(d->d_inode);
-	au_rw_write_unlock(&au_di(d)->di_rwsem);
-}
-
-void di_write_lock2_child(struct dentry *d1, struct dentry *d2, int isdir)
-{
-	AuDebugOn(d1 == d2
-		  || d1->d_inode == d2->d_inode
-		  || d1->d_sb != d2->d_sb);
-
-	if (isdir && au_test_subdir(d1, d2)) {
-		di_write_lock_child(d1);
-		di_write_lock_child2(d2);
-	} else {
-		/* there should be no races */
-		di_write_lock_child(d2);
-		di_write_lock_child2(d1);
-	}
-}
-
-void di_write_lock2_parent(struct dentry *d1, struct dentry *d2, int isdir)
-{
-	AuDebugOn(d1 == d2
-		  || d1->d_inode == d2->d_inode
-		  || d1->d_sb != d2->d_sb);
-
-	if (isdir && au_test_subdir(d1, d2)) {
-		di_write_lock_parent(d1);
-		di_write_lock_parent2(d2);
-	} else {
-		/* there should be no races */
-		di_write_lock_parent(d2);
-		di_write_lock_parent2(d1);
-	}
-}
-
-void di_write_unlock2(struct dentry *d1, struct dentry *d2)
-{
-	di_write_unlock(d1);
-	if (d1->d_inode == d2->d_inode)
-		au_rw_write_unlock(&au_di(d2)->di_rwsem);
-	else
-		di_write_unlock(d2);
-}
-
-/* ---------------------------------------------------------------------- */
-
-struct dentry *au_h_dptr(struct dentry *dentry, aufs_bindex_t bindex)
-{
-	struct dentry *d;
-
-	DiMustAnyLock(dentry);
-
-	if (au_dbstart(dentry) < 0 || bindex < au_dbstart(dentry))
-		return NULL;
-	AuDebugOn(bindex < 0);
-	d = au_di(dentry)->di_hdentry[0 + bindex].hd_dentry;
-	AuDebugOn(d && d->d_count <= 0);
-	return d;
-}
-
-/*
- * extended version of au_h_dptr().
- * returns a hashed and positive h_dentry in bindex, NULL, or error.
- */
-struct dentry *au_h_d_alias(struct dentry *dentry, aufs_bindex_t bindex)
-{
-	struct dentry *h_dentry;
-	struct inode *inode, *h_inode;
-
-	inode = dentry->d_inode;
-	AuDebugOn(!inode);
-
-	h_dentry = NULL;
-	if (au_dbstart(dentry) <= bindex
-	    && bindex <= au_dbend(dentry))
-		h_dentry = au_h_dptr(dentry, bindex);
-	if (h_dentry && !au_d_hashed_positive(h_dentry)) {
-		dget(h_dentry);
-		goto out; /* success */
-	}
-
-	AuDebugOn(bindex < au_ibstart(inode));
-	AuDebugOn(au_ibend(inode) < bindex);
-	h_inode = au_h_iptr(inode, bindex);
-	h_dentry = d_find_alias(h_inode);
-	if (h_dentry) {
-		if (!IS_ERR(h_dentry)) {
-			if (!au_d_hashed_positive(h_dentry))
-				goto out; /* success */
-			dput(h_dentry);
-		} else
-			goto out;
-	}
-
-	if (au_opt_test(au_mntflags(dentry->d_sb), PLINK)) {
-		h_dentry = au_plink_lkup(inode, bindex);
-		AuDebugOn(!h_dentry);
-		if (!IS_ERR(h_dentry)) {
-			if (!au_d_hashed_positive(h_dentry))
-				goto out; /* success */
-			dput(h_dentry);
-			h_dentry = NULL;
-		}
-	}
-
-out:
-	AuDbgDentry(h_dentry);
-	return h_dentry;
-}
-
-aufs_bindex_t au_dbtail(struct dentry *dentry)
-{
-	aufs_bindex_t bend, bwh;
-
-	bend = au_dbend(dentry);
-	if (0 <= bend) {
-		bwh = au_dbwh(dentry);
-		if (!bwh)
-			return bwh;
-		if (0 < bwh && bwh < bend)
-			return bwh - 1;
-	}
-	return bend;
-}
-
-aufs_bindex_t au_dbtaildir(struct dentry *dentry)
-{
-	aufs_bindex_t bend, bopq;
-
-	bend = au_dbtail(dentry);
-	if (0 <= bend) {
-		bopq = au_dbdiropq(dentry);
-		if (0 <= bopq && bopq < bend)
-			bend = bopq;
-	}
-	return bend;
-}
-
-/* ---------------------------------------------------------------------- */
-
-void au_set_h_dptr(struct dentry *dentry, aufs_bindex_t bindex,
-		   struct dentry *h_dentry)
-{
-	struct au_hdentry *hd = au_di(dentry)->di_hdentry + bindex;
-	struct au_branch *br;
-
-	DiMustWriteLock(dentry);
-
-	au_hdput(hd);
-	hd->hd_dentry = h_dentry;
-	if (h_dentry) {
-		br = au_sbr(dentry->d_sb, bindex);
-		hd->hd_id = br->br_id;
-	}
-}
-
-int au_dbrange_test(struct dentry *dentry)
-{
-	int err;
-	aufs_bindex_t bstart, bend;
-
-	err = 0;
-	bstart = au_dbstart(dentry);
-	bend = au_dbend(dentry);
-	if (bstart >= 0)
-		AuDebugOn(bend < 0 && bstart > bend);
-	else {
-		err = -EIO;
-		AuDebugOn(bend >= 0);
-	}
-
-	return err;
-}
-
-int au_digen_test(struct dentry *dentry, unsigned int sigen)
-{
-	int err;
-
-	err = 0;
-	if (unlikely(au_digen(dentry) != sigen
-		     || au_iigen_test(dentry->d_inode, sigen)))
-		err = -EIO;
-
-	return err;
-}
-
-void au_update_digen(struct dentry *dentry)
-{
-	atomic_set(&au_di(dentry)->di_generation, au_sigen(dentry->d_sb));
-	/* smp_mb(); */ /* atomic_set */
-}
-
-void au_update_dbrange(struct dentry *dentry, int do_put_zero)
-{
-	struct au_dinfo *dinfo;
-	struct dentry *h_d;
-	struct au_hdentry *hdp;
-
-	DiMustWriteLock(dentry);
-
-	dinfo = au_di(dentry);
-	if (!dinfo || dinfo->di_bstart < 0)
-		return;
-
-	hdp = dinfo->di_hdentry;
-	if (do_put_zero) {
-		aufs_bindex_t bindex, bend;
-
-		bend = dinfo->di_bend;
-		for (bindex = dinfo->di_bstart; bindex <= bend; bindex++) {
-			h_d = hdp[0 + bindex].hd_dentry;
-			if (h_d && !h_d->d_inode)
-				au_set_h_dptr(dentry, bindex, NULL);
-		}
-	}
-
-	dinfo->di_bstart = -1;
-	while (++dinfo->di_bstart <= dinfo->di_bend)
-		if (hdp[0 + dinfo->di_bstart].hd_dentry)
-			break;
-	if (dinfo->di_bstart > dinfo->di_bend) {
-		dinfo->di_bstart = -1;
-		dinfo->di_bend = -1;
-		return;
-	}
-
-	dinfo->di_bend++;
-	while (0 <= --dinfo->di_bend)
-		if (hdp[0 + dinfo->di_bend].hd_dentry)
-			break;
-	AuDebugOn(dinfo->di_bstart > dinfo->di_bend || dinfo->di_bend < 0);
-}
-
-void au_update_dbstart(struct dentry *dentry)
-{
-	aufs_bindex_t bindex, bend;
-	struct dentry *h_dentry;
-
-	bend = au_dbend(dentry);
-	for (bindex = au_dbstart(dentry); bindex <= bend; bindex++) {
-		h_dentry = au_h_dptr(dentry, bindex);
-		if (!h_dentry)
-			continue;
-		if (h_dentry->d_inode) {
-			au_set_dbstart(dentry, bindex);
-			return;
-		}
-		au_set_h_dptr(dentry, bindex, NULL);
-	}
-}
-
-void au_update_dbend(struct dentry *dentry)
-{
-	aufs_bindex_t bindex, bstart;
-	struct dentry *h_dentry;
-
-	bstart = au_dbstart(dentry);
-	for (bindex = au_dbend(dentry); bindex >= bstart; bindex--) {
-		h_dentry = au_h_dptr(dentry, bindex);
-		if (!h_dentry)
-			continue;
-		if (h_dentry->d_inode) {
-			au_set_dbend(dentry, bindex);
-			return;
-		}
-		au_set_h_dptr(dentry, bindex, NULL);
-	}
-}
-
-int au_find_dbindex(struct dentry *dentry, struct dentry *h_dentry)
-{
-	aufs_bindex_t bindex, bend;
-
-	bend = au_dbend(dentry);
-	for (bindex = au_dbstart(dentry); bindex <= bend; bindex++)
-		if (au_h_dptr(dentry, bindex) == h_dentry)
-			return bindex;
-	return -1;
-}