Commit Graph

133 Commits

Author SHA1 Message Date
b5d9371a21 Add bananapi-m2-zero machine 2023-02-03 11:25:02 +01:00
2d229d2ca0 conf: machine: Add "Orange Pi One Plus" support
Signed-off-by: Ilja Byckevich <iljabyckevich@gmail.com>
2023-01-30 20:13:27 +03:00
56dec0cd0f sunxi.inc: Drop xf86-video-turbo
It cannot be compiled anymore drop it.

Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
2023-01-23 10:33:56 +01:00
2d86e00d7e Use correct arch in sun5i.inc
Cortex-A8 architecture is ARMv7A.
Before this path fix the following failure was triggered when building for "olinuxino-a13"
machine:

"
[..]/meta-sunxi/conf/machine/include/sun5i.inc:3: Could not include required
file conf/machine/include/arm/armv8a/tune-cortexa8.inc
"
2022-11-29 15:51:19 +02:00
9aab097e6b add nanopi duo2 board support 2022-11-15 21:40:54 +01:00
fdce4f8674 conf: Added orange-pi-pc2 config
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
2022-04-21 21:23:33 +02:00
e8d39837e2 conf: machine: Added nanopi r1 support
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
2022-04-21 09:27:42 +02:00
9895874a29 sunxi: Use 5.15 as kernel provider
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
2022-04-21 09:18:10 +02:00
78c395aab7 sunxi64.inc: Don't set UBOOT_BINARY
It's valid for sunxi uboot only and breaks wic so comment it

Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
2022-04-13 10:35:31 +02:00
ef5b9a675b conf: machine: add orange-pi-r1
Add the machine configuration for the Orange Pi R1.

Signed-off-by: Eric Bode <eric.bode@foundries.io>
2022-01-20 09:50:05 +01:00
3a7f7e1199 conf: sunxi.inc: bump linux mainline preferred version to 5.10
Signed-off-by: Clément Péron <peron.clem@gmail.com>
2022-01-02 19:39:34 +01:00
dcd5790e87 conf: machine: Fix paths for tunes
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
2021-09-20 09:39:40 +02:00
6a1103b726 misc: More fixes for new syntax
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
2021-09-20 09:39:18 +02:00
e66258ad7a layer: convert to new override syntax 💥
OE/Yocto is migration towards new override syntax,
current master (upcomming honister release) will not
tolerate "_" as override operator.

New override syntax will be backported to
dunfell, gatesgarth, hardknott releases.

Signed-off-by: Bartłomiej Burdukiewicz <bartlomiej.burdukiewicz@gmail.com>
2021-08-23 18:47:19 +02:00
edb10c82bd Added support for bananapi-m64 machine
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
2021-05-21 21:14:52 +02:00
5602fb2ff8 Added bananapi-m2m machine
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
2021-04-13 13:13:20 +02:00
6eb1acdbcb Merge pull request #312 from louisbuchert/master
adding Lichee Pi Zero machine (booted)
2021-04-06 22:32:13 +02:00
151ac47fda Merge pull request #295 from macpijan/add_wks_file
conf: sunxi.inc: add wks file for arm
2021-03-30 22:16:40 +02:00
0b64109569 Added Lichee Pi Zero machine (booted) 2021-03-30 19:23:08 +02:00
K
c32ee2b4a0 Added MarsBoard A10 machine config 2021-03-23 11:09:20 +05:00
2df608df63 conf: machine: add bananapi-m2plus
Add machine configuration for H3 based Banana Pi M2+.

Signed-off-by: Marek Frydrysiak <marek.frydrysiak@gmail.com>
2020-11-10 17:48:01 +01:00
18f3e4a016 Merge pull request #294 from macpijan/add_nanopi_m1
machine: nanopi-m1: add config
2020-11-04 22:35:49 +01:00
eaf085f87f conf: added sunxi and sunxi64 machine overrides. 2020-10-22 19:30:01 +02:00
9f622c70b8 conf: sunxi.inc: add wks file for arm
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
2020-09-28 21:57:43 +02:00
9773647ff4 machine: nanopi-m1: add config
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
2020-09-28 21:57:07 +02:00
1d6ef084db Enable open source GPU support
Enable open source GPU support for Mali Utgard GPUs (lima driver) and
Mali Midgard and Bifrost GPUs (panfrost driver).
The support is enabled by:
- enabling DRM kernel CONFIGs
- enabling lima, panfrost and kmsro in Mesa
- disabling the specific mali driver overrides in sunxi-mali.inc
To enable open source mainline graphics support just add the following
line in your local.conf:

MACHINEOVERRIDES .= ":use-mailine-graphics"

Please note that some machines may need a bigger CMA value to be able to
start Weston. To do that, add e.g. "cma=128M" to the kernel parameters.

Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>
2020-03-18 21:36:14 +01:00
6eab521310 conf: machine: add orange-pi-zero-plus2-h3
Add machine configuration for H3 variant of Orange Pi Zero Plus2.

Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>
2020-02-13 23:14:28 +00:00
02e3e7fba8 linux-mainline: add lt 5.4.18, stable 5.5.3
According to:
https://www.kernel.org/category/releases.html
version 5.4 is a longterm release, so:
- add longterm 5.4 series at 5.4.18
- update longterm 4.19 series to 4.19.103
- update stable to 5.5.3
- remove rc, as it quickly gets out of date. rc users will likely build
kernel from master outside of OE anyway
- set 5.4 as the preferred version for linux-mainline

Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>
2020-02-11 20:54:54 +00:00
7fdbe68c1f ap6212a.inc: add support for AMPAK 6212A
Add support for AMPAK 6212A module:
1) install kernel module
2) install firmware
3) create the required symlink with the AP6212 NVRAM file
Enable the support in the boards with the module, according to:
https://linux-sunxi.org/Table_of_Allwinner_based_boards
The link creation with compatible name works on kernels >= 5.0.

Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>
2019-12-05 10:05:54 +00:00
504fa1bb71 machine: remove U-Boot PREFERRED_VERSION
Remove pointless U-Boot PREFERRED_VERSION, as meta-sunxi no longer
provides its own u-boot recipe.

Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>
2019-11-06 12:44:11 +00:00
b20940edd0 linux-sunxi: disable glamor build if Mali is used
Unless somebody writes libgbm replacement for binary Mali driver
(sort of converter for gbm-UMB) there is no glamor for us.

Closes #227
2019-09-07 22:16:50 +02:00
741b6238b6 Merge pull request #262 from MdeVries86/feature/olinuxino-a64-wifi
Add wifi support for olinuxino-a64
2019-07-09 11:35:36 +02:00
5e1a2937bd Add wifi support for olinuxino-a64 2019-06-25 23:50:52 +02:00
f4e059ee3d sun50i: change tuning params to cortex-a53 2019-06-25 16:17:10 +02:00
7c6cefcfe6 conf: machine: Add Machine Nano Pi M1 Plus
Signed-off-by: Thinh Nguyen <nguyen.trong.thinh@styl.solutions>
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
2019-06-15 16:28:07 +02:00
5ba77e0981 Add machine config for olinuxino-a64 2019-06-15 16:23:54 +02:00
e698148963 Added pcDuino3 Board 2019-06-15 16:22:20 +02:00
e93d74767e sunxi.inc: Set kernel version to latest LTS version
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
2019-05-30 15:56:54 +02:00
6b9ef7519c Merge pull request #246 from XevoInc/master
machine: use armv8a, not armv8
2019-03-07 07:13:49 +01:00
efe4acdeff machine: use armv8-a, not armv8
In the latest OE, this file has been renamed. Since this board is
ARMv8-A, we should use the armv8-a config instead of the armv8 config.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
2019-03-05 15:35:52 -08:00
064257654a Add pine64-plus machine
Adds A64-based pine64-plus machine.

Signed-off-by: Matt Porter <mporter@konsulko.com>
2019-01-13 08:37:06 -05:00
6b536f1083 u-boot: upgrade to 2018.09
Bump u-boot version. Notes:
- pylibfdt fix is not needed anymore
- add bison and flex as depenedencies
- update license info

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
2018-11-10 21:58:32 +03:00
7d770d3061 Merge pull request #225 from mirzak/orange-pi-pc-plus-update-u-boot-version
orange-pi-pc-plus: update preferred U-boot version to v2018.03
2018-09-25 19:34:40 +02:00
a28dffd16d machine: sunxi: remove UBOOT_LOADADDRESS
This has been assigned a value containing a typo since 2015, my
assumption is that this is not used and hence we can simply drop
it. The typo is that the address contains a 'O' character instead
of '0', the last one is a zero.

Either way the kernel.bbclass will set a default value, that is:

     UBOOT_LOADADDRESS ?= "${UBOOT_ENTRYPOINT}"

Signed-off-by: Mirza Krak <mirza.krak@northern.tech>
2018-08-06 16:02:13 +02:00
47c3e21ace orange-pi-pc-plus: update preferred U-boot version to v2018.03
v2017.03 no longer exists and produces warnings if set as preferred:

NOTE: Resolving any missing task queue dependencies
NOTE: preferred version v2017.03% of u-boot not available (for item virtual/bootloader)
NOTE: versions of u-boot available: 1:2018.01 2:v2018.03+gitAUTOINC+f95ab1fb6e
NOTE: preferred version v2017.03% of u-boot not available (for item u-boot-dev)
NOTE: versions of u-boot available: 1:2018.01 2:v2018.03+gitAUTOINC+f95ab1fb6e
NOTE: preferred version v2017.03% of u-boot not available (for item u-boot)
NOTE: versions of u-boot available: 1:2018.01 2:v2018.03+gitAUTOINC+f95ab1fb6e

Signed-off-by: Mirza Krak <mirza.krak@northern.tech>
2018-08-06 12:50:50 +02:00
4900e75a6a nanopi-neo2: add new board
Signed-off-by: Martin Kelly <mkelly@xevo.com>
2018-05-01 10:11:57 -07:00
c0f804f573 nanopi-neo-plus2: add new board
Signed-off-by: Martin Kelly <mkelly@xevo.com>
2018-04-30 16:54:43 -07:00
5e61ba92e3 u-boot: upgrade to 2018.03
This version of u-boot includes nanopi-neo-plus2 support.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
2018-04-12 15:18:56 -07:00
17c1731264 nanopi-neo-air: add new board
We have devicetree and u-boot configs for the nanopi-neo-air, so add
them. As a basic test, this boots correctly on my nanopi-neo-air.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
2018-01-10 12:56:57 -08:00
2c85181c92 drop DEFAULTTUNE from machine recipes
Signed-off-by: Enrico Butera <ebutera@users.sourceforge.net>
2017-12-21 17:40:55 +01:00