Commit Graph

117 Commits

Author SHA1 Message Date
Diego Rondini
1d6ef084db Enable open source GPU support
Enable open source GPU support for Mali Utgard GPUs (lima driver) and
Mali Midgard and Bifrost GPUs (panfrost driver).
The support is enabled by:
- enabling DRM kernel CONFIGs
- enabling lima, panfrost and kmsro in Mesa
- disabling the specific mali driver overrides in sunxi-mali.inc
To enable open source mainline graphics support just add the following
line in your local.conf:

MACHINEOVERRIDES .= ":use-mailine-graphics"

Please note that some machines may need a bigger CMA value to be able to
start Weston. To do that, add e.g. "cma=128M" to the kernel parameters.

Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>
2020-03-18 21:36:14 +01:00
Diego Rondini
6eab521310 conf: machine: add orange-pi-zero-plus2-h3
Add machine configuration for H3 variant of Orange Pi Zero Plus2.

Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>
2020-02-13 23:14:28 +00:00
Diego Rondini
02e3e7fba8 linux-mainline: add lt 5.4.18, stable 5.5.3
According to:
https://www.kernel.org/category/releases.html
version 5.4 is a longterm release, so:
- add longterm 5.4 series at 5.4.18
- update longterm 4.19 series to 4.19.103
- update stable to 5.5.3
- remove rc, as it quickly gets out of date. rc users will likely build
kernel from master outside of OE anyway
- set 5.4 as the preferred version for linux-mainline

Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>
2020-02-11 20:54:54 +00:00
Diego Rondini
7fdbe68c1f ap6212a.inc: add support for AMPAK 6212A
Add support for AMPAK 6212A module:
1) install kernel module
2) install firmware
3) create the required symlink with the AP6212 NVRAM file
Enable the support in the boards with the module, according to:
https://linux-sunxi.org/Table_of_Allwinner_based_boards
The link creation with compatible name works on kernels >= 5.0.

Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>
2019-12-05 10:05:54 +00:00
Diego Rondini
504fa1bb71 machine: remove U-Boot PREFERRED_VERSION
Remove pointless U-Boot PREFERRED_VERSION, as meta-sunxi no longer
provides its own u-boot recipe.

Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>
2019-11-06 12:44:11 +00:00
Trevor Woerner
efe6aef33f LAYERSERIES_COMPAT: warrior -> zeus
Update the layer compatibility information to indicate this layer is
compatible with "zeus".

Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2019-10-09 08:00:20 -04:00
slapin
b20940edd0 linux-sunxi: disable glamor build if Mali is used
Unless somebody writes libgbm replacement for binary Mali driver
(sort of converter for gbm-UMB) there is no glamor for us.

Closes #227
2019-09-07 22:16:50 +02:00
Marek Belisko
741b6238b6
Merge pull request #262 from MdeVries86/feature/olinuxino-a64-wifi
Add wifi support for olinuxino-a64
2019-07-09 11:35:36 +02:00
Marcel de Vries
5e1a2937bd Add wifi support for olinuxino-a64 2019-06-25 23:50:52 +02:00
Hendrik v. Raven
be78fab082
drop layers older than warrior from layercompat 2019-06-25 16:23:08 +02:00
Hendrik v. Raven
f4e059ee3d
sun50i: change tuning params to cortex-a53 2019-06-25 16:17:10 +02:00
Marek Belisko
7c6cefcfe6 conf: machine: Add Machine Nano Pi M1 Plus
Signed-off-by: Thinh Nguyen <nguyen.trong.thinh@styl.solutions>
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
2019-06-15 16:28:07 +02:00
Marcel de Vries
5ba77e0981 Add machine config for olinuxino-a64 2019-06-15 16:23:54 +02:00
Cameron O'Keeffe
e698148963 Added pcDuino3 Board 2019-06-15 16:22:20 +02:00
Marek Belisko
4921234ed7
Merge pull request #257 from nandra/sunxi-kernel-bump
Sunxi kernel bump
2019-06-07 10:18:41 +02:00
Marek Belisko
e93d74767e sunxi.inc: Set kernel version to latest LTS version
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
2019-05-30 15:56:54 +02:00
Maciej Pijanowski
abd1463aa9 conf/layer.conf: add LAYERDEPENDS
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
2019-05-29 19:09:40 +02:00
Maciej Pijanowski
84961a9521 conf/layer.conf: add LAYERVERSION
Signed-off-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
2019-05-29 19:09:30 +02:00
Trevor Woerner
b6288e15ad layer.conf: add warrior to COMPAT list
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
2019-04-03 16:12:25 -04:00
Enrico Butera
6b9ef7519c
Merge pull request #246 from XevoInc/master
machine: use armv8a, not armv8
2019-03-07 07:13:49 +01:00
Martin Kelly
efe4acdeff machine: use armv8-a, not armv8
In the latest OE, this file has been renamed. Since this board is
ARMv8-A, we should use the armv8-a config instead of the armv8 config.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
2019-03-05 15:35:52 -08:00
Matt Porter
064257654a Add pine64-plus machine
Adds A64-based pine64-plus machine.

Signed-off-by: Matt Porter <mporter@konsulko.com>
2019-01-13 08:37:06 -05:00
Sergey Matyukevich
6b536f1083 u-boot: upgrade to 2018.09
Bump u-boot version. Notes:
- pylibfdt fix is not needed anymore
- add bison and flex as depenedencies
- update license info

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
2018-11-10 21:58:32 +03:00
Enrico Butera
7d770d3061
Merge pull request #225 from mirzak/orange-pi-pc-plus-update-u-boot-version
orange-pi-pc-plus: update preferred U-boot version to v2018.03
2018-09-25 19:34:40 +02:00
Mirza Krak
a28dffd16d machine: sunxi: remove UBOOT_LOADADDRESS
This has been assigned a value containing a typo since 2015, my
assumption is that this is not used and hence we can simply drop
it. The typo is that the address contains a 'O' character instead
of '0', the last one is a zero.

Either way the kernel.bbclass will set a default value, that is:

     UBOOT_LOADADDRESS ?= "${UBOOT_ENTRYPOINT}"

Signed-off-by: Mirza Krak <mirza.krak@northern.tech>
2018-08-06 16:02:13 +02:00
Mirza Krak
47c3e21ace orange-pi-pc-plus: update preferred U-boot version to v2018.03
v2017.03 no longer exists and produces warnings if set as preferred:

NOTE: Resolving any missing task queue dependencies
NOTE: preferred version v2017.03% of u-boot not available (for item virtual/bootloader)
NOTE: versions of u-boot available: 1:2018.01 2:v2018.03+gitAUTOINC+f95ab1fb6e
NOTE: preferred version v2017.03% of u-boot not available (for item u-boot-dev)
NOTE: versions of u-boot available: 1:2018.01 2:v2018.03+gitAUTOINC+f95ab1fb6e
NOTE: preferred version v2017.03% of u-boot not available (for item u-boot)
NOTE: versions of u-boot available: 1:2018.01 2:v2018.03+gitAUTOINC+f95ab1fb6e

Signed-off-by: Mirza Krak <mirza.krak@northern.tech>
2018-08-06 12:50:50 +02:00
Enrico Butera
df468d72d7
Merge pull request #215 from XevoInc/nanopi-neo-plus2
Add the nanopi neo 2 and plus2
2018-06-10 23:40:08 +02:00
Martin Kelly
cf8eb364a0 add LAYERSERIES_COMPAT declaration
In current Yocto master, it's now a warning not to include
LAYERSERIES_COMPAT in layer.conf. See below for more information:

https://www.yoctoproject.org/docs/latest/mega-manual/mega-manual.html#var-LAYERSERIES_COMPAT

Add this information for all current development and stable releases.

Tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Tested-by: Diego Rondini <diego.rondini@kynetics.com>
Signed-off-by: Martin Kelly <mkelly@xevo.com>
2018-05-30 09:16:42 -07:00
Martin Kelly
4900e75a6a nanopi-neo2: add new board
Signed-off-by: Martin Kelly <mkelly@xevo.com>
2018-05-01 10:11:57 -07:00
Martin Kelly
c0f804f573 nanopi-neo-plus2: add new board
Signed-off-by: Martin Kelly <mkelly@xevo.com>
2018-04-30 16:54:43 -07:00
Martin Kelly
5e61ba92e3 u-boot: upgrade to 2018.03
This version of u-boot includes nanopi-neo-plus2 support.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
2018-04-12 15:18:56 -07:00
Martin Kelly
17c1731264 nanopi-neo-air: add new board
We have devicetree and u-boot configs for the nanopi-neo-air, so add
them. As a basic test, this boots correctly on my nanopi-neo-air.

Signed-off-by: Martin Kelly <mkelly@xevo.com>
2018-01-10 12:56:57 -08:00
Enrico Butera
2c85181c92 drop DEFAULTTUNE from machine recipes
Signed-off-by: Enrico Butera <ebutera@users.sourceforge.net>
2017-12-21 17:40:55 +01:00
Enrico Butera
f3cba0b6b0
Merge pull request #196 from nandra/nandra-orangepi-pc-plus
Add configuration for orangepi pc plus
2017-12-21 17:39:34 +01:00
Marek Belisko
97ba08e3b6 conf: Added configuration for orangepi pc plus
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
2017-12-20 21:20:03 +01:00
Sergey Matyukevich
72c0f7aa6e orange-pi-zero-plus2: add new board
Orange Pi Zero Plus2 board is based on AllWinner H5 SoC.
For more details on its hardware see linux-sunxi wiki:
http://linux-sunxi.org/Xunlong_Orange_Pi_Zero_Plus_2

This patch enables basic support for orange-pi-zero-plus2 board:
- mainline kernel 4.14.2
- mainline u-boot 2017.11
- dts kernel patch that fixes boot from SD card
- dts kernel patch enabling AP6212 WiFi/BT chip

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
2017-12-03 22:41:36 +03:00
Sergey Matyukevich
684a800c86 u-boot: enable support for sun50i
Add support of sun50i SoC family to u-boot recipe:
- move SPL_BINARY to sunxi.inc and sunxi64.inc
  -- different SoC families have different SPL_BINARY names
- create separate boot.cmd files for arm and aarch64
  -- different kernel image types require different boot commands
- add atf-sunxi dependency
  -- u-boot for aarch64 needs ATF BL31 binary

- add do_compile_sun50i[depends]
  -- make sure that BL31 binary is already deployed before u-boot build

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
2017-12-03 22:24:12 +03:00
Sergey Matyukevich
3434ae8c66 sun50i: add support for aarch64 sun50i SoC family
Follow the same approach as in 32-bit sunxi SoC families:
- create sunxi64.inc: umbrella description for aarch64 sunxi
  -- specify proper u-boot/spl image types
  -- specify proper kernel image type
  -- specify u-boot/kernel preferred providers
- create basic description of sun50i SoC family
  -- sun50i SoC family is based on armv8

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
2017-12-03 22:18:23 +03:00
Sergey Matyukevich
4d9466c131 linux: update kernel recipes
- remove older stable release recipes
- bump stable linux recipe to 4.14.2
- bump git linux recipe to 4.15-rc1
- rename linux to linux-mainline

Renaming kernel recipe from 'linux' to 'linux-mainline' is needed to
get ready for adding aarch64 support. The reason is in the value of
OVERRIDES environment variable. BitBake uses OVERRIDES to control what
variables are overridden after BitBake parses recipes and configuration
files. So packages names are not allowed to take values listed in
OVERRIDES. One of the OVERRIDES values is TARGET_OS:
  TARGET_OS = linux${LIBCEXTENSION}${ABIEXTENSION}
For arm architecture TARGET_OS = "linux-gnueabi". However for aarch64
architecture TARGET_OS = "linux". As a result, in the case of aarch64
kernel package can not be named 'linux'. This patch renames kernel
package name to 'linux-mainline' in order to be able to maintain the
same kernel recipes for both arm and aarch64 boards.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
2017-12-03 21:57:31 +03:00
Sergey Matyukevich
35e264f9fe u-boot: bump version to 2017.11
Remove patch adding OLinuxino-Lime2-eMMC defconfig:
it already merged to uboot mainline.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
2017-12-03 21:44:48 +03:00
Diego Rondini
4b43209a92 linux: update to 4.13.4
Update stable to 4.13.4 version thus removing backported patch and requirement
of git version for several boards (current stable 4.13 is newer than previous
git 4.11).
Additionally update git version to 4.14-rc3.

Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>
2017-10-02 11:23:06 +00:00
Diego Rondini
0ebd445fbd olinuxino-a20lime2-emmc: add configuration
Add machine configuration file for Olimex A20-OLinuXino Lime2 Board with 4GB
eMMC.

Signed-off-by: Diego Rondini <diego.rondini@kynetics.com>
2017-04-26 08:46:45 +00:00
Fernando De La Garza
dec3faadd9 Bump versions kernel and u-boot versions for orange pi pc 2017-04-19 17:02:16 -07:00
Fernando De La Garza
6b0661dff2 Add support for Orange Pi PC board 2017-04-19 13:33:50 -07:00
Sergey Matyukevich
7037d13e6a Add support for Orange Pi Zero board
Add machine description for Orange Pi Zero board. Detailed hardware
overview is available at the following linux-sunxi wiki page:
http://linux-sunxi.org/Orange_Pi_Zero

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
2017-04-09 19:13:15 +03:00
Sergey Matyukevich
a6d2bb6b9e Bump versions of kernel and u-boot
Bump preferred u-boot release version and kernel git version:
- kernel 4.11.0-rc5
- u-boot 2017.03

Update preferred versions of u-boot and kernel for all the
boards that are using them: nanopi-neo, orange-pi-one, pcduino.

The purpose of this update is to get the latest features for
sun8i cores including SPI support and orange-pi-zero support

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
2017-04-09 19:13:12 +03:00
Pedro Pinto
7f791bd576 Fix Olimex A20 SOM configuration
* Added missing kernel device tree definition.
* Updated U-Boot definiton.

(cherry picked from commit be22a388db)
2017-01-18 21:39:50 +01:00
James Pettigrew
0a77e55428 Add support for FriendlyARM NanoPi Neo board
Signed-off-by: James Pettigrew <james@innovum.com.au>
2017-01-12 11:24:59 +11:00
Sergey Matyukevich
2b1cafc104 pcduino: bump preferred u-boot and kernel versions
Bump preferred u-boot and kernel versions:
- kernel 4.9
- u-boot 2016.11

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
2016-12-15 23:10:24 +03:00
Sergey Matyukevich
75fe4617ce Add support for Orange Pi One board
Add machine description for Orange Pi One board.

Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
2016-12-14 22:53:24 +03:00