configure gets 2 new options:
--enable-neon / --enable-neon-rtcd
the NEON modules are split to their own convenience lib and built with
auto-detected flags if none are given via CFLAGS.
the /proc/cpuinfo check will only be used for armv7 targets whose
toolchain does not enable NEON by default or didn't have NEON forced by
the CFLAGS from the environment.
Change-Id: I2755bc1d065d5d6ee6143b44978c2082f8bef1c5
This fixes decoders built against clang-3.8 (r11c). Without this change
bad conditional code would be generated causing all calls to
WebPParseHeaders() to return 4 (UNSUPPORTED_FEATURE).
Original fix:
https://android-review.googlesource.com/#/c/196123
Change-Id: Id4b4d84048d347cea110b6cf297ef9ef4fbed323
TEST_AND_ADD_CFLAGS tests flags independently from AM_CFLAGS. The lack
of -Wformat may cause -Wformat-* checks to fail (gcc 4.9), though in the
end they would have succeeded with -Wall present.
Change-Id: Ic8f0d5b8a3f75a0b105bdc4ddd16690878a30222
the number of segments are previously validated, but an explicit check
is needed to avoid a warning under gcc-4.9
this is similar to the changes made in:
c8a87bb AssignSegments: quiet -Warray-bounds warning
3e7f34a AssignSegments: quiet array-bounds warning
Change-Id: Iec7d470be424390c66f769a19576021d0cd9a2fd
This will allow to work in-place on cropped area later.
Also sped up the inverse gradient filtering in SSE2 (~4%)
Change-Id: I463149eee95d36984328f163a1e17f8cabd87441
This is only possible if the filtering is not VERTICAL or GRADIENT.
Otherwise, we need the spatial predictors and hence need the un-visible
part above crop_top row.
COLOR_INDEX transform is the only transform that is not predicted
from previous row. Applying the same for other transform (spatial
predict, ...) is going to be more involve and use an extra temporary row.
+ remove ApplyInverseTransformsAlpha()
(work is done directly within ExtractPalettedAlphaRows())
+ change back to using filter_ instead of unfilter_func_
Change-Id: I09e57efae4a4af00bde35f21ca6e3d73b35d7d43
After the introduction of lossy frame rectangles
we need equivalent option in anim_diff for merging similar frames.
Change-Id: I1d03acace396ec4cb0212586c6e8b8ec5b0b0bfc
not exactly same.
Based on lossy WebP quality setting, ignore minor differences when
flattening
similar blocks.
For 6k set, at default quality with '-min_size' option, improves
compression by 0.3%
Change-Id: Ifcb64219f941e869eb2643e231220b278aad4cd4
there's some subtle changes:
- DecodeAlphaData() may be called with pos==end because we don't want
to decode more data (there's none left), but because we want to apply
process_func() to all the unprocessed pixels already decoded
- last_row is exclusive and should be understood as 'up to last_row'. Can be misleading.
- VP8LDecodeAlphaImageStream() was testing dec->last_pixel_ for completion,
which was wrong because last_pixel_ is the last *decoded* pixel, not the
last *processed* one. -> test now uses last_row_, as expected
Change-Id: I1fb04ba25cd7a4775db9e3deee3e2ae80f9c0a75
this might change some crc slightly, since WebPDequantizeLevels()
performs an analysis pass, counting levels, which impacts the smoothing.
Now, the cropping area is not the same, so minor diffs are expected here
and there.
Change-Id: I3cce1e40c6f11c25b7c841044d637685c5740352
* make ALPHNew/Delete static
* properly init ALPHDec::io_
* introduce AllocateAlphaPlane() and WebPDeallocateAlphaMemory()
* reorganize VP8DecompressAlphaRows()
but we're still allocate the full alpha-plane. Optim will come
in another patch since it's tricky
Change-Id: Ib6f190a40abb7926a71535b0ed67c39d0974e06a
this change will be superseded by patch #335160 eventually, but until then
let's fix the problem temporarily.
Change-Id: Iafd979c2ff6801e3f1de4614870ca854a4747b04
When FlattenSimilarBlocks() was making some blocks transparent with
averaged RGB values, filtering in lossy compression was causing
blockiness just outside the edge of these blocks.
Disabling filtering for that particular case avoid these block
artifacts.
The total encoded size of the 6k GIF set remains roughly the same (in
fact, reduces a bit).
Change-Id: Ida71cbabd59d851e16d871f53d19473312b3cc77
We pick a mapping with quality 0 mapping to max diff 32, to quality 100
mapping to max_diff 1.
For 6k GIF image set, this improves compression by:
4% at quality 0
0.05% at quality 75
Benefits the MovingThumbnailer test videos too.
Change-Id: I6838ce864d41e1e65311d26b9b8115a12390a253
This way we can ignore some noisy pixels and get tighter frame
rectangles.
Some results:
- Correctness:
Tested that anim_diff reports all images are identical for lossless, and
similar min_psnr value for lossy and mixed modes.
Also checked output images visually to make sure there weren't any
obvious kinks.
- Compression:
A very tiny improvement for 6000 image GIF set we have (0.03%) for lossy
and mixed mode. For some of these images, frames get dropped
automatically as they have a very small diff from previous frame.
10 images from test_video_frames_png show a clear improvement in
compression though. This CL leads to 7 out of 9 lossy WebPs getting
smaller -- for one of them, this leads to a higher quality being picked
(as that’s still < 150 KB).
Change-Id: If539b9e77e1375aa15edc8f926933593a9865f1c
and also pass 'VP8Io* io' extra param to VP8DecompressAlphaRows()
This is somehow in preparation for some memory optimizations in
the 'cropping' case. For now, only the easy crop_bottom case is
optimized.
Change-Id: Ib54531ba057bf62b98422dbb6c181dda626c72c2
This avoids generating file that would trigger a decoding bug
found in 0.4.0 -> 0.4.3 libwebp versions.
This reverts commit 6ecd72f845.
Change-Id: I4667cc8f7b851ba44479e3fe2b9d844b2c56fcf4
The mode's bits were not taken into account, which is ok for most of cases.
But in case of super large image, with 'easy' content, their overhead starts
mattering a lot and we were omitting to optimize for these.
Now, these mode bits have their own lambda values associated, limiting
the jerkiness. We also limit (for -m 2 only) the individual number of bits
to something that will prevent the partition 0 overflow.
removed the I4_PENALTY constant, which was a rather crude approximation.
Replaced by some q-dependent expression.
fixes issue #289
Change-Id: I956ae2d2308c339adc4706d52722f0bb61ccf18c
If value is '2', it means the buffer is a 'slow' one, like GPU-mapped memory.
This change is backward compatible (setting is_external_memory to 2
will be a no-op in previous libraries)
dwebp: add flags to force a particular colorspace format
new flags is:
-pixel_format {RGB,RGBA,BGR,BGRA,ARGB,RGBA_4444,RGB_565,
rgbA,bgrA,Argb,rgbA_4444,YUV,YUVA}
and also,external_memory {0,1,2}
These flags are mostly for debuggging purpose, and hence are not documented.
Change-Id: Iac88ce1e10b35163dd7af57f9660f062f5d8ed5e
