* "declaration of ‘index’ shadows a global declaration [-Wshadow]"
* "signed and unsigned type in conditional expression [-Wsign-compare]"
Change-Id: I891182d919b18b6c84048486e0385027bd93b57d
Earlier such images were using roughly 9 * width * height bytes for
decoding. Now, they take 6 * width * height memory.
Change-Id: Ie4a681ca5074d96d64f30b2597fafdca648dd8f7
no precision loss observed
speed is not really faster (0.5% at max), as forward-WHT isn't called often.
also: replaced a "int << 3" (undefined by C-spec) by a "int * 8"
( supersedes https://gerrit.chromium.org/gerrit/#/c/48739/ )
Change-Id: I2d980ec2f20f4ff6be5636105ff4f1c70ffde401
Saturation was done on input coeff, not quantized one.
This saturation is not absolutely needed: output of FTransformWHT
is in range [-16320, 16321]. At quality 100, max quantization steps is 8,
so the maximal range used by QuantizeBlock() is [-2040, 2040].
But there's some extra bias (mtx->bias_[] and mtx->sharpen_[]) so
it's better to leave this saturation check for now.
addresses issue #145
Change-Id: I4b14f71cdc80c46f9eaadb2a4e8e03d396879d28
subdirectories with more than one target can have the install targets
run in parallel with make -jN. group the shared headers in one place to
produce a common install target.
Change-Id: I1f3aa338a8ee6d681de1e5d0b2c6244d2c3d5451
Reported to eventually be 4% on ARM
(see https://code.google.com/p/webp/issues/detail?id=134 for details)
We might activate it selectively later...
Output values is not bitwise the same as the LUT-based
version, but difference is only +/-1 at max.
Change-Id: I1cc790ff4459885ed2ae2e72f31c5f3740095f07
larger values are still dealt with in the .cc
~5% faster encoding
Output size is slightly different (variably), because of
different floating-point calculation ordering.
Change-Id: I6ede18b09c753997cf78aa1199a807d9ddb5d4b4
* add SSE2 variant for lossless
* speed-up TransformColor calls using specialized TransformColorBlue/Red
* Fuse the Shannon Entropy calls to compute it for X and X+Y simultaneously.
This latter changes the output size a little bit.
Change-Id: Ie5df94da78bf51a58da859c9099b56340da9ec89
This flag will make the code use no uint64, no asm, and no fancy
trick, but instead aim at being as simple and straightforward as
possible.
Main use is to help emscripten generate proper JS code.
More code needs to be simplified later.
Also: tune the BITS values to be 24 and make use of WEBP_RIGHT_JUSTIFY
Here are the typical timing for decoding a large image:
ARM7-a:
dwebp_justify_32_neon Time to decode picture: 3.280s
dwebp_justify_24_neon Time to decode picture: 2.640s
dwebp_justify_16_neon Time to decode picture: 2.723s
dwebp_justify_8_neon Time to decode picture: 2.802s
dwebp_justify_32 Time to decode picture: 4.264s
dwebp_justify_24 Time to decode picture: 3.696s
dwebp_justify_16 Time to decode picture: 3.779s
dwebp_justify_8 Time to decode picture: 3.834s
dwebp_32_neon Time to decode picture: 4.010s
dwebp_24_neon Time to decode picture: 2.725s
dwebp_16_neon Time to decode picture: 2.852s
dwebp_8_neon Time to decode picture: 2.778s
dwebp_32 Time to decode picture: 4.587s
dwebp_24 Time to decode picture: 3.800s
dwebp_16 Time to decode picture: 3.902s
dwebp_8 Time to decode picture: 3.815s
REFERENCE (HEAD) Time to decode picture: 3.818s
x86_64:
dwebp_justify_32 Time to decode picture: 0.473s
dwebp_justify_24 Time to decode picture: 0.434s
dwebp_justify_16 Time to decode picture: 0.450s
dwebp_justify_8 Time to decode picture: 0.467s
dwebp_32 Time to decode picture: 0.474s
dwebp_24 Time to decode picture: 0.468s
dwebp_16 Time to decode picture: 0.468s
dwebp_8 Time to decode picture: 0.481s
REFERENCE (HEAD) Time to decode picture: 0.436s
i386:
dwebp_justify_32 Time to decode picture: 0.723s
dwebp_justify_24 Time to decode picture: 0.618s
dwebp_justify_16 Time to decode picture: 0.626s
dwebp_justify_8 Time to decode picture: 0.651s
dwebp_32 Time to decode picture: 0.744s
dwebp_24 Time to decode picture: 0.627s
dwebp_16 Time to decode picture: 0.642s
dwebp_8 Time to decode picture: 0.642s
Change-Id: Ie56c7235733a24f94fbfc2e4351aae36ec39c225
store values to a temporary variable before calling functions that take
vector types.
removes non-standard constructs such as:
(uint8x8x2_t){{ a, b }}
fixing:
src/dsp/upsampling_neon.c:69:32: error: macro "vst2_u8" passed 3
arguments, but takes just 2
Change-Id: Ib4368e16e3a3efac18024f02be94e76243ade2dc
Fixes: https://code.google.com/p/webp/issues/detail?id=140
- along the lines of the SSE chroma upsampling.
Total speedup is ~30%.
4% speed loss on YuvToRgbXX conversion using tables instead
of 14-bit fixed precision. TODO(later): investigate, and compare
to x86.
see http://code.google.com/p/webp/issues/detail?id=134
Change-Id: Idc2261037cd13b4553ca20ecc4c4007099c37009
When the config option '--enable-libwebpdecoder' is specified, the
lean decoder library 'libwebpdecoder' will be created in addition to
libwebp. Also dwebp binary will be linked to libwebpdecoder, if this
config option is specified.
Change-Id: I9de3e149b59c9a8390fae2ba660941749640e54a
We don't need to use the exact forward transform,
since it's only a rough evaluation.
-> Removed some shifts and rounding constants.
Change-Id: I3fdf8b4fe9720473894155e1ad0345f4d1fd9a33
Contributed by Wayne Chen (datoudatou at gmail dot com)
+ some header cleanup
+ remove the NEON suffix in static functions
Change-Id: I75bf5e9b54cf5e1acc53764c6f081d61690f8e3d
(implements the backward and forward transforms in the encoder)
original patch by Wayne Chen (datoudatou at gmail dot com)
Change-Id: Ic00f3bffcdf7a924f043006728735c810ee47a57
This is mostly for experimentation!
Need to define USE_YUVj flag in the code for that.
suggested by benwreder at hotmail dot com
Change-Id: If0b8e2c1863efc08ce097de6de20f4c7efc3f7e8
fixes the 'blocky sky problem' (saturation problem: when luma was flat,
chroma noise was taking over, resulting in random segment id assigned.
When just using a common uniform segment was better).
+ side clean-up and readibility/experimentability MACRO'ization
+ added '-map 7' option
Change-Id: I35982a9e43c0fecbfdd7b05e4813e8ba8c121d71
this will avoid the "dec_neon.o has no symbol" warning
no change in binary size observed on linux.
Change-Id: Ia27ae2bc5a03d714afa7e46671fdcf4cb630784d
lossy was rounding with a bias toward opaque:
[232+, 8] -> [15, 1]
now both paths use the range:
[240+, 16] -> [15, 1]
Change-Id: I3da2063b4959b9e9f45bae09e640acc1f43470c5
* green was not descaled properly
* alpha was over-dithered, making the value '0x0f' not be a fixed point
* alpha value was not restored ok.
Change-Id: Ia4a4d75bdad41257f7c07ef76a487065ac36fede
Fix the lossless decoder for the case when it has to apply other
inverse transforms before applying Color indexing inverse transform.
The main idea is to make ColorIndexingInverse virtually in-place: we
use the fact that the argb_cache is allocated to accommodate all
*unpacked* pixels of a macro-row, not just *packed* pixels.
Change-Id: I27f11f3043f863dfd753cc2580bc5b36376800c4
Order-by-cost mostly unchanged (up to a scaling constant 1/log(2))
(except for few minor diff in < 2% of cases)
+ remove unused field cost_mode->cache_bits_
Change-Id: I714f8ab12f49a23f5d499a64c741382c9b489a3e
Adds new methods WebPPictureARGBToYUVA() and WebPPictureYUVAToARGB()
Depending on the value of picture->use_argb_input,
the main call WebPEncode() will convert appropriately.
Note that both conversions are lossy, so it's recommended to:
* use YUVA input for lossy compression (picture->use_argb_input=0)
* use ARGB input for lossless compression (picture->use_argb_input=1)
Change-Id: I8269d607723ee8a1136b9f4999f7ff4e657bbb04
The new modes are
MODE_rgbA
MODE_bgrA
MODE_Argb
MODE_rgbA_4444
It's binary incompatible, since the enums changed.
While at it, i removed the now unneeded KeepAlpha methods.
-> Saved ~12k of code!
* made explicit mention that alpha_plane is persistent,
so we have access to the full alpha plane data at all time.
Incremental decoding of alpha was planned for, but not
implemented. So better not dragged this constaint for now
and make the code easier until we revisit that.
Change-Id: Idaba281a6ca819965ca062d1c23329f36d90c7ff
Defining LOCAL_ARM_NEON = true can result in neon instructions being
used in portions unprotected by the cpu check.
This changes defines a WEBP_USE_NEON/WEBP_ANDROID_NEON pair similar to
the SSE2 code and MSVC.
Change-Id: Ifac010b06e42c73d5aca529baa2198c6796674bd
add proper cpu-detection for Android targets
Fixes issue #118 (and is a better solution for #117).
based on patch by pepijn vaneeckhoudt
Change-Id: I6b00ea6d51ca658ccf6a3d55b87b99c01c6805be
* lossless_encoder: (46 commits)
split StoreHuffmanCode() into smaller functions
more consolidation: introduce VP8LHistogramSet
big code clean-up and refactoring and optimization
Some cosmetics in histogram.c
Approximate FastLog between value range [256, 8192]
Forgot to update out_bit_costs to symbol_bit_costs at one instance.
Evaluate output cluster's bit_costs once in HistogramRefine.
Simple Huffman code changes.
Lossless decoder: remove an unneeded param in ReadHuffmanCodeLengths().
Reducing emerging palette size from 11 to 9 bits.
Move GetHistImageSymbols to histogram.c
Improve predict vs no-predict heuristic.
code-moving and clean-up
reduce memory usage by allocating only one histo
Restrict histo_bits to ensure histo_image size is under 32MB
further simplification for the meta-Huffman coding
A quick pass of cleanup in backward reference code
Make transform bits a function of encode method (-m).
introduce -lossless option, protected by USE_LOSSLESS_ENCODER
Run TraceBackwards for higher qualities.
...
Conflicts:
src/enc/webpenc.c
Change-Id: I9a5d98cba0889ea91d10699466939cc283da345a
Profiled data: Profiled few images and found that in the function VP8LFastLog,
90% of time table lookup is performed, while rest of time (10%) call to log
function is made. Typical lookup accounts for 10 CPU instructions and call to
log 200 instruction counts. The weighted average comes out to be 30
instructions per call. For mid qualities (25-75), this function (VP8LFastLog)
accounts for 30-50% of total CPU cycles (via call path: VP8LCOlorSpaceTransform
-> PredictionCostCrossColor -> ShannonEntropy). After this change, the log is
called less that 1% of time, with average instructions being 15 per call.
Measured the performance over 1000 files for various qualities and found
overall compression speedup between 10-15% (in quality range [0, 75]). The
compression density loss is around 0.5% (though at some qualities, compression
is little better as well).
Change-Id: I247bc6a8d4351819c871f19d65455dc23aea8650
make elements of "Multiplier" struct unsigned, so that any negative values are
automatically converted to "mod 256" values.
Change-Id: Iab4f9bacc50dcd94a557944727d9338dbb0982f7
so that it uses original values of left, top etc for prediction rather than the
predicted values of the same. Also, do some renaming in the same to make it
more readable.
Change-Id: I2fe94e35a6700bd437f5c601e2af12323bf32445
- VP8LEncAnalyze, EvalAndApplySubtractGreen, ApplyPredictFilter,
ApplyCrossColorFilter
- Added palette handling and transform buffer management in VP8LEncodeImage()
- Add Transforms (subtract Green, Predict, cross_color) to dsp/lossless.c.
These are more-or-less copied from src/lossless code.
After this Change, will implement the EncodeImageInternal() method.
Change-Id: Idf71f803c24b3b5ae3b5079b15e019721784611d
src/dec/Makefile.am: add missing reference to vp8li.h
src/{dec,dsp,enc}/Makefile.am: move some headers to noinst_
Change-Id: I0e2bc69980bd8175d99ad0ab63f537ef9e425b77
src/dsp/lossless.c: In function 'VP8LInverseTransform':
src/dsp/lossless.c:312:23: warning: 'packed_pixels' may be used
uninitialized in this function [-Wuninitialized]
src/dsp/lossless.c:304:16: note: 'packed_pixels' was declared here
src/dsp/lossless.c:258:34: warning: 'm.red_to_blue_' may be used
uninitialized in this function [-Wuninitialized]
src/dsp/lossless.c:275:17: note: 'm.red_to_blue_' was declared here
src/dsp/lossless.c:257:34: warning: 'm.green_to_blue_' may be used
uninitialized in this function [-Wuninitialized]
src/dsp/lossless.c:275:17: note: 'm.green_to_blue_' was declared here
src/dsp/lossless.c:255:33: warning: 'm.green_to_red_' may be used
uninitialized in this function [-Wuninitialized]
src/dsp/lossless.c:275:17: note: 'm.green_to_red_' was declared here
patch by pepijn vaneeckhoudt
Change-Id: Iffa4764487a75479df45e772169325cd9ee60d94
- use common file organization across subdir makefiles
- append lib/source/header list variables and sort
Change-Id: I0653e1c73a4552b0c43d21f321b22b4972d6e87b
import changes from experimental 5529a2e^
and enable build in autoconf and makefile.unix; windows will be treated
separately.
Change-Id: Ie2e177a99db63190b4cd647b3edee3b4e13719e9
Pulled from the current HEAD (218c32e).
The history of this and related files is a bit entangled so rather
trying to split the changes and introduce some noise in master's history
we'll start with a fresh snapshot.
The file progression is still available in the experimental branch.
Change-Id: I40538799dbf999abb9408ac83f55b897d8e22498
- remove some unused functions
- move global arrays from data to read only section
- explicitly cast malloc returns; not specifically necessary, but helps
show intent
- miscellaneous formatting
Change-Id: Ib15fe5b37fe6c29c369ad928bdc3a7290cd13c84
As with the loop filter, implementing this with intrinsics is difficult
because we require subscript access for reading and writing 32 bits at a
time.
Approximately 5% decode speed improvement. This could be increased by
exposing TransformOne and rewriting TransformTwo to only handle dual
IDCTs.
Change-Id: Idd409264ab5d154a537107a1d54b419a48f7c1a8
gcc-4.0 defines __PIC__ but not __pic__. This leaves the test for
__pic__ should the inverse case exist.
Fixes issue #103; build failing with:
"error: can't find a register in class 'BREG' while reloading 'asm'"
Change-Id: Ia767a733de6ce0294146f9477ff9c46f0ebe13b0
- Fix the off-by-one diff when cropping with simple-filter.
- Fix a bug in incremental decoding in case of alpha.
- In VP8FinishRow(), do not decode alpha when y_start > y_end.
- Correct output of alpha channel for MODE_ARGB.
- Correct output of alpha channel for MODE_RGBA_4444.
Change-Id: I785763a2a704b973cc742ad93ffbb53699d1fc0a
Gathers all DSP-related function (and SSE2 implementations).
Clean-up some unwanted symbolic dependencies so that webp_encode,
webp_decode and webp_dsp are truly independent libraries.
+ opportunistic clean-up:
* remove unneeded VP8DspInitTables(), now integrated in VP8DspInit()
* make consistent use of VP8GetCPUInfo() in the various DspInit() funcs
* change OUT macro to DST
