-> WebPImageReader
Introduce a variant of image-guessing function that returns a reader
directly: WebPGuessImageReader()
Change-Id: I5ddc53024fcf941e33d997b2be6aa1a963d939ab
adds a generic examples/image_dec.[ch] entry point too.
WebPGuessImageType() can be used to infer image type.
Change-Id: I8337e7b6ad91863c9cf118e4791668d2d175079b
This is to prevent users shooting in the foot using -psnr or
-size alone and not getting the expected result.
Change-Id: I67a3289e4ec0a2a813c98807f2ec5e600f52dc63
we map the input file into memory, even in the non-stdin case.
This is less efficient than letting the png/jpeg/... decoding libraries
use fread()'s, but more general.
Change-Id: I4501cb9a1daf69593eb8e3326c115cd8cbdf92fd
-> read is a bit slower (memory allocation and such) than reading directly from disk.
-> we're not yet ready to accept stdin as input (-- -) because we still need to guess
the file type with GetImageType(). And since we can't rewind on stdin, this will need
a bit more work before being able to read from stdin.
Change-Id: I6491fac4b07d28d1854518325ead88669656ddbf
Rename the flag to exact instead of the opposite cleanup_alpha. Add the flag to
WebPConfig. Do the cleanup in the webp encoder library rather than the cwebp
binary, this will be needed for the next stage: smarter alpha cleanup for
better compression which cannot be done as a preprocessing due to depending on
predictor choices in the encoder.
Change-Id: I2fbf57f918a35f2da6186ef0b5d85e5fd0020eef
This is to infer the needed conversion to YUV(A) or RGB(A).
This is useful to avoid some conversion steps between ARGB and YUVA.
For instance, if the input file is a JPEG, we decode to RGB and
convert to YUV right away, without the intermediate step to ARGB.
The only caveat is that cropping/scaling might give slightly different result,
because of YUV420 downsampling. Therefore, we omit this feature
at cwebp level, when -crop or -rescale is used.
Change-Id: I5a3abe5108982f2a4570e841e3d9baffc73f5bee
using a *tmp_plane buffer to split a/r/g/b planes up appeared to
be the easiest route, compared to copy-pasting the whole code and
making it x_stride aware...
Change-Id: I0898ef1df62bd3e1713b77187b31b5eeef3832fe
Updated the near-lossless level mapping and make it correlated to lossy
quality i.e 100 => minimum loss (in-fact no-loss) and the visual-quality loss
increases with decrease in near-lossless level (quality) till value 0.
The new mapping implies following (PSNR) loss-metric:
-near_lossless 100: No-loss (bit-stream same as -lossless).
-near_lossless 80: Very very high PSNR (around 54dB).
-near_lossless 60: Very high PSNR (around 48dB).
-near_lossless 40: High PSNR (around 42dB).
-near_lossless 20: Moderate PSNR (around 36dB).
-near_lossless 0: Low PSNR (around 30dB).
Change-Id: I930de4b18950faf2868c97d42e9e49ba0b642960
Enable the WebP near-lossless feature by pre-processing the image to smoothen
the pixels.
On a 1000 PNG image corpus, for which WebP lossless (default settings) gets
25% compression gains, following is the performance of near-lossless feature
at various '-near_lossless' levels:
-near_lossless 90: 30% (very very high PSNR 54-60dB)
-near_lossless 75: 38% (very high PSNR 48-54dB)
-near_lossless 50: 45% (high PSNR 42-48dB)
-near_lossless 25: 48% (moderate PSNR 36-42dB)
-near_lossless 10: 50% (PSNR 30-36dB)
WebP near-lossless is specifically useful for discrete-tone images like
line-art, icons etc.
Change-Id: I7d12a2c9362ccd076d09710ea05c85fa64664c38
This compresses the uimage using lossless compression and controlable
decimating pre-process.
Code is under WEBP_EXPERIMENTAL_FEATURE while it's being experimented with.
Change-Id: I8b7f4cfcc3c6afc52a556102842bdbb045ed5ee8
this change has the side-effect of using directory names in the
include, silencing a lint warning.
Change-Id: Ib91cf63a90534e32fadfa5c2372bfdb29f854d02
there's still some malloc/free in the external example
This is an encoder API change because of the introduction
of WebPMemoryWriterClear() for symmetry reasons.
The MemoryWriter object should probably go in examples/ instead
of being in the main lib, though.
mux_types.h stil contain some inlined free()/malloc() that are
harder to remove (we need to put them in the libwebputils lib
and make sure link is ok). Left as a TODO for now.
Also: WebPDecodeRGB*() function are still returning a pointer
that needs to be free()'d. We should call WebPSafeFree() on
these, but it means exposing the whole mechanism. TODO(later).
Change-Id: Iad2c9060f7fa6040e3ba489c8b07f4caadfab77b
These are presets for lossless coding, similar to zlib.
The shortcut for lossless coding is now, e.g.:
cwebp -z 5 in.png -o out_lossless.webp
There are 10 possible values for -z parameter:
0 (fastest, lowest compression)
to 9 (slowest, best compression)
A reasonable tradeoff is -z 6, e.g.
-z 9 can be quite slow, so use with care.
This -z option is just a shortcut for some pre-defined
'-lossless -m xx -q yy' combinations.
Change-Id: I6ae716456456aea065469c916c2d5ca4d6c6cf04
- 12/19/13: version 0.4.0
* improved gif2webp tool
* numerous fixes, compression improvement and speed-up
* dither option added to decoder (dwebp -dither 50 ...)
* improved multi-threaded modes (-mt option)
* improved filtering strength determination
* New function: WebPMuxGetCanvasSize
* BMP and TIFF format output added to 'dwebp'
* Significant memory reduction for decoding lossy images with alpha.
* Intertwined decoding of RGB and alpha for a shorter
time-to-first-decoded-pixel.
* WebPIterator has a new member 'has_alpha' denoting whether the frame
contains transparency.
* Container spec amended with new 'blending method' for animation.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=K/1E
-----END PGP SIGNATURE-----
Merge tag 'v0.4.0'
libwebp 0.4.0
- 12/19/13: version 0.4.0
* improved gif2webp tool
* numerous fixes, compression improvement and speed-up
* dither option added to decoder (dwebp -dither 50 ...)
* improved multi-threaded modes (-mt option)
* improved filtering strength determination
* New function: WebPMuxGetCanvasSize
* BMP and TIFF format output added to 'dwebp'
* Significant memory reduction for decoding lossy images with alpha.
* Intertwined decoding of RGB and alpha for a shorter
time-to-first-decoded-pixel.
* WebPIterator has a new member 'has_alpha' denoting whether the frame
contains transparency.
* Container spec amended with new 'blending method' for animation.
* tag 'v0.4.0':
update ChangeLog
update NEWS description with new general features
gif2webp: don't use C99 %zu
cwebp: fix metadata output w/lossy+alpha
makefile.unix: clean up libgif2webp_util.a
update Changelog
bump version to 0.4.0
update AUTHORS & .mailmap
update NEWS for 0.4.0
Change-Id: I6df1b512fe0b697192f1f9b29431cd59aa6063d1
original/compressed pictures were not converted to an adequate YUVA
colorspace before computing the distortion.
Change-Id: I37775e9b7dbd6eca16c38e235e1df325858d36a1
Earlier, all lossless images were assumed to contain alpha.
Now, we use the 'alpha_is_used' bit from the VP8L bitstream to determine
the
same.
Detecting an absence of alpha can sometimes lead to much more efficient
rendering, especially for animated images.
Related: refine mux code to read width/height/has_alpha information only
once
per frame/fragment. This avoid frequent calls to VP8(L)GetInfo().
Change-Id: I4e0eef4db7d94425396c7dff6ca5599d5bca8297
rather than symlink the webm/vpx terms, use the same header as libvpx to
reference in-tree files
based on the discussion in:
https://codereview.chromium.org/12771026/
Change-Id: Ia3067ecddefaa7ee01550136e00f7b3f086d4af4
new option: -blend_alpha 0xrrggbb
also: don't force picture.use_argb value for lossless. Instead,
delay the YUVA<->ARGB conversion till WebPEncode() is called.
This make the blending more accurate when source is ARGB
and lossy compression is used (YUVA).
This has an effect on cropping/rescaling. E.g. for PNG, these
are now done in ARGB colorspace instead of YUV when lossy compression
is used.
Change-Id: I18571f1b1179881737a8dbd23ad0aa8cddae3c6b
this would require a PRIuS or similar macro for proper platform
compatibility (Visual Studio for instance would be variants of %lu)
Change-Id: I1af530c7c358c91b845acde1d8c12ef46c2ef746
METADATA_ICCP was renamed to METADATA_ICC in
d8dc72a examples: normalize icc related program arguments
but was merged without rebasing after
0bc4268 cwebp: output metadata statistics
Change-Id: Ie317208488cc851d5d21300591c91cebf5abd4a7
using token-buffer (that is: slightly more memory. O(output_size))
This change is ON by default. To return to previous behaviour, use
'cwebp -low_memory' or set config.low_memory to true.
Side-effect of this new mode: it forces 1 partition only (which was
default anyway), and makes some statistics about the bitstream
no longer available. cwebp will no longer report 'intra4-coeffs', etc.
This mode also doesn't work (yet) with multi-pass, and -low_memory
is currently forced for multi-pass.
also: reversed the flag: USE_TOKEN_BUFFER -> DISABLE_TOKEN_BUFFER
also: fixed the kAverageBytesPerMB estimate
Change-Id: I4ea80382038d6df4309663e0cb7bd88d9bca9cf1
