The method VP8LCalculateEstimateForCacheSize is not evaluating the all possible
range for cache_bits.
Also added a small penality for choosing the larger cache-size. This is done to
strike a balance between additional memory/CPU cost (with larger cache-size) and
byte savings from smaller WebP lossless files.
This change saves about 0.07% bytes and speeds up compression by 8% (default
settings). There's small speedup at Q=50 along with byte savings as well.
Compression at Quality=25 is not effected by this change.
Change-Id: Id8f87dee6b5bccb2baa6dbdee479ee9cda8f4f77
Instead of calling HashChainFindMethod, call a new (subset) method
HashChainFindOffset to get the offset/distance for a given length.
The encoding is tad faster at default compression
Before After
bpp/rate bpp/rate
442 Palette 0.2720/5.270 MP/s 0.2720/5.790 MP/s
558 non-palette 3.7607/0.797 MP/s 3.7607/0.816 MP/s
Change-Id: If4041a9c18f7e972f49fcbab8c3e2f013d8bf1cf
Updated VP8LGetBackwardReferences and HashChainFindCopy method with following:
- Remove the recursive CostModelBuild.
- Reuse the lz77 backward refs in CostModelBuild, instead of evaluating it
again (as it was done for recursion_level=0).
- Consolidated the Match-length logic inside FindMatchLength method.
- Removed the logic for altering best_length/val based on the 2D distance.
The additional 162 value (+= 9 * 9 + 9 * 9 - y * y - x * x) can't change the
best_val eval computation to choose a different curr_length, as best_val was
set to 'curr_length << 16'.
Following is the impact on the compression speed/density at default & max
quality, overall this speeds up compression by 5-15% (q=100 -> 75) with a tad
drop (0.02-0.03%) in compression density for the non-palette images.
Before After
bpp/Rate(MP/s) bpp/Rate(MP/s)
q=75 (def)
All 1000 2.4492/1.049 MP/s 2.4498/1.230 MP/s
Palette 0.2719/5.060 MP/s 0.2719/6.110 MP/s
non-Palette 3.7597/0.732 MP/s 3.7607/0.840 MP/s
q=100
All 1000 2.4134/0.125 MP/s 2.4142/0.131 MP/s
Palette 0.2692/2.585 MP/s 0.2692/2.885 MP/s
non-Palette 3.7040/0.079 MP/s 3.7053/0.083 MP/s
Change-Id: I27a5eff3356d876c3e949fd32262244b25678b7a
set WEBP_EXTERN to visibility=default
+ explicitly mark VP8GetCPUInfo as it's referenced within the examples
Change-Id: Ie3d2b15088e888f0b55203b205993eba75899d99
move the attribute to the front of the function to quiet clang warning:
GCC does not allow no_sanitize_thread attribute in this position on a
function definition
Change-Id: Ie4cc6e35a07bd00eab67d9cd6801bd2be9cfe676
Compared to previous mode it gives another 10-30% improvement in compression keeping comparable PSNR on corresponding quality settings.
Still protected by the WEBP_EXPERIMENTAL_FEATURES flag.
Change-Id: I4821815b9a508f4f38c98821acaddb74c73c60ac
avoids an ICE with NDK r10b + NDK_TOOLCHAIN_VERSION=4.9
In function 'SSE16x16':
enc_mips32.c (684) internal compiler error: Segmentation fault
Change-Id: I1a3d33c0a9534c97633ab93bcdf9bf59d3a7e473
Evaluate if for Palette images (num_colors <= 256), non-palette
compression path (Subtract green, predictor transform etc) yield an
optimal compression density.
This change reduces the WebP file (for palette images) size by 0.4% with
drop of 3-5% in compression speed.
Change-Id: I1ad66fa94db4fd7ba7bc215763791ef662cd4f42
the number of segments are previously validated, but an explicit check
is needed to avoid a warning under gcc-4.9
Change-Id: Ifa7c0dd7f3f075b3860fa8ec176d2c98ff54fcea
got rid of the |a-b|^|b-a| method and went back
to just (a-b)^2 instead.
quality | size(bytes) after/before | time (ms) after/before
Change-Id: Ia3e0e6507b3f903deb1e182f78dad6df07380fd0
We compact the palette by weighted distance, favoring the green channel.
Average gain on paletted file is ~0.5%, with gain up to 6-7% on some favorable cases.
Encoding speed is unaffected.
Disabled for alpha (or any single-channel input)
Also: always use quality=20 for EncodePalette() since it
doesn't make any real difference.
Change-Id: I19fb14316a366f139a941b45aef5663a33c905e1
SSE2 version is 2.1x faster
This is used to transfer the alpha plane to green channel before lossless compression.
Change-Id: I01d9df0051c183b1ff5d6eb69961d4f43e33141a
Don't combine the Histograms that have trivial (single valued A, R & B)
symbols.
Following is the compression savings data along with compression time (before
& after) per image.
Before After
bpp, rate(MP/s) bpp, rate(MP/s)
Q=25, method = 4 2.508, 1.807 2.499, 1.916
Q=50, method = 4 2.460, 1.488 2.456, 1.512
Q=75, method = 4 2.452, 1.078 2.450, 1.092
Q=25, method = 5 2.505, 1.398 2.496, 1.383
Q=50, method = 5 2.458, 1.170 2.453, 1.143
Q=75, method = 5 2.453, 0.886 2.450, 0.855
This change provides 0.1-0.4% compression gains and speeds up the lossless
compression for the default method=4 (the drop in compression speed is between 1-3.5% for method=5).
Change-Id: Idfd88c2092f37afacd26a97097b3053f8183953a
Tested on 1000 pngs corpus with quality 90-100 it gives ~0.15% improvement
in compression density and ~7% speed up.
Change-Id: I460f56c96707edb3c1f0b51a024e5122e10458df
* We don't need to change DecodeAlpha, since incremental
decoding is not useful for Alpha (we already decode
progressively along the RGB)
* Similarly, we don't do incremental decoding for level>0 planes:
the metadata don't turn into visible pixel (only the ones in level0), so...
(No visible speed change)
Change-Id: I2fd4b9ba227561a7dbede647686584b752be7baa
- don't call VP8LClear() when there's no error (and let the caller do it)
- only initialize output once if state_ is not READ_DATA
- don't over-set dec->status_ = READ_DATA
- don't re-set dec->status_ if DecodeImageStream() fails
- remove unneeded dec->action_ field
- make ReadImageInfo() check br->eos_
- use ErrorStatusLossless() more consistently
Change-Id: Ica6e4b1c82e3fce8b1ce0274def551a886b73b0b
Optimize the decoding for region that have trivial literal codes.
The trivial literal is defined as huffman image with Red, Blue and Alpha
huffman trees with only single code values.
This speeds up lossless decoding by 3%
Change-Id: I0204949917836f74c0eb4ba5a7f4052a4797833b
* We were re-doing most of the work in plain-C as 'left-over'.
* we were always returning has_alpha = true because of a bad mask all_0xff
These bugs were conservative and silent, in the sense that we were 'just' doing
more work than necessary.
Now, the SSE2 version is really 2x faster than the C version.
Change-Id: I6c8132a267fe3c7a3d1fa70e7a5fcd10719543fa
Handle the corner case when VP8LDecodeImage() method is called with an invalid
header data. The lossless decoding doesn't support incremental mode yet.
Return the error status as BITSTREAM error in case not all pixels are decoded
with the provided bit-stream. Also added asserts in the VP8LDecodeImage() method
to validate the decoder header with appropriate/valid data for huffman trees
(htree_groups_ etc).
Change-Id: Ibac9fcfc4bd0a2c5f624bb9d4a2b9f6459aa19ea
-> introduce special case 64b pattern-copy, similar to the 8b one for alpha.
-> use mempcy() for non-overlapping areas
+ cosmetics and homogenezation of the code
Change-Id: I0e65e04b96fec94c009a4614137dfba2a0f98561
ReadSymbol() finishes with a VP8LSetBitPos() call only and could miss an eos_ during the decode loop.
Things are faster because of inlining too.
Change-Id: I2d2a275f38834ba005bc767d45c5de72d032103e
eos_ needs to be set only when superfluous bits have actually
been requested.
Earlier, we were assuming pre-mature end-of-stream to be an error.
Now, more precisely, we mark error when we have encountered end-of-stream *and*
we attempt to read more bits after that.
This handles cases where image data requires no bits to be read
Change-Id: I628e2c39c64f10c443fb51f86b1f5919cc9fd299
if ALPHA_LOSSLESS_COMPRESSION produces a too big file (very rare!),
we fall-back to no-compression automatically.
Change-Id: I5f3f509c635ce43a5e7c23f5d0f0c8329a5f24b7
speed-up is ~1.6% for photographic image to 10% for graphical image
(1000 images corpus was sped up by 5.8 %)
Code by akramarz@google.com and jyrki@google.com
Change-Id: Iceb2e50e6cc761b9315a3865d22ec9d19b8011c6
Split initialization of YUV444Converters[] out of Upsamplers init.
update test for NULL function pointers
Change-Id: I9603f54250f90c85a12ffbecfd6c59e9b06c47e0
vtbl4_u8 is available everywhere except iOS arm64: use vtbl2q_u8 there
with a corresponding change in the load.
Change-Id: Ib84212dda3c7875348282726c29e3b79b78b0eac
rightmost pixel was missing a copy, which could lead to invalid read.
Also added a lower dimension of 4, below which we use the regular conversion.
This is to prevent corner cases, in addition to not being overkill.
Change-Id: Iac12e7a3d74590f12fe8eeb1830b9891e61439f6
_M_IX86 will be defined in mingw builds after including windows.h. as
the gcc inline asm is first, this missing check would only have caused
an error if the code was reorganized.
Change-Id: I395679bcfc43e94d308d1ceb0c0fbf932b2c378c
with a special case for dithering==0., it gets somewhat faster on x86
thanks to inlining.
Also, less macros.
Change-Id: Ic2f2bf6718310743bb40cef2104fa759a073e6d5
New function: WebPPictureSmartARGBToYUVA()
This implement smart RGB->YUV conversion.
This is rather undocumented for now, and is triggered using '-pre 4'
preprocessing option.
This is slow-ish and use quite some memory, but should be improvable.
This is somehow a usable beta version.
Change-Id: Ia50a8c30134e4cab8a7d3eb70aef13ce1f6187a1
This compresses the uimage using lossless compression and controlable
decimating pre-process.
Code is under WEBP_EXPERIMENTAL_FEATURE while it's being experimented with.
Change-Id: I8b7f4cfcc3c6afc52a556102842bdbb045ed5ee8
Some single-frame GIF images have a canvas larger than the frame rectangle. For
such images, we retain the ANMF, ANIM and VP8X chunks in the output WebP file.
This ensures that the full canvas width/height and frame offsets are retained.
Change-Id: I3ebae4893f953984de4072fda0938411de787a29
if a thread was still doing work when End() was called there'd be a race
on worker->status_. in these cases, however, the specific value is
meaningless as it would be >= OK and the thread would have been shut
down properly, but we'll check 'impl_' instead to avoid any potential
TSan/DRD reports.
Change-Id: Ib93cbc226a099f07761f7bad765549dffb8054b1
defines HAVE_BUILTIN_BSWAP16/32/64
updated endian_inl.h to have a non-configure fallback for gcc and clang
BSwap16() now uses __builtin_bswap16 if available
Change-Id: Ia04ee07b39303c4b247df96d84f298fb8a81f389
also reduce the load size from 64 to 32 bits as the top 32 bits are
being shifted away in the operation.
the change is neutral speed-wise on x86_64 as is the change in load size
on x86, but it gives a slight improvement on 32-bit arm.
x86 is improved ~13%, 32-bit arm ~3.7%
aarch64 is untested but will likely benefit as well.
Change-Id: Ibcb02a70f46f2651105d7ab571afe352673bef48
forces aligned memory reads (via memcpy) in the VP8 bit reader, useful
for platforms that don't support unaligned loads.
Change-Id: Ifa44a9a1677fbdc6a929520f9340b7e3fcbd6692
this defines WORDS_BIGENDIAN, replacing uses of
__BIG_ENDIAN__/__BYTE_ORDER__ with it
+ fixes lossless BGRA output with big-endian toolchains
that do not define __BIG_ENDIAN__ (codesourcery mips gcc)
Change-Id: Ieaccd623292d235343b5e34b7a720fc251c432d7
moves the following to this header:
- htole*() definitions from bit_writer.c
- __BIG_ENDIAN__ fallback define from bit_reader_inl.h
Change-Id: I7fff59543f08a70bf8f9ddac849b72ed290471b1
(typecast uint32 pointer to uint64).
The proposed change is little (0.05%) slower but avoids uint32 to uint64
pointer conversion.
Change-Id: I6b8828077ea1324fabd04bfa7e7439e324776250
previously, the final canvas size was adjusted tightly from the
animation frames. Now, it can be specified separately (to be larger, in particular).
calling WebPMuxSetCanvasSize(mux, 0, 0) triggers the 'adjust tightly' behaviour.
This can be useful after calling WebPMuxCreate() if further image addition
is expected.
-> Fixed gif2webp accordingly.
also: made WebPMuxAssemble() more robust by systematically zero-ing WebPData.
Change-Id: Ib4f7eac372cf9dbf6e25cd686a77960e386a0b7f
this will remove a warning about the shift amount not being
an immediate (=constant).
Change-Id: Ie9a00fefdb9a07ec8994fb113f24234518bc878a
Also: fix the NULL sharpen argument mismatch.
mostly to balance the use of bswap64, some gcc platforms are already
interpreting the default case the same
Change-Id: Icf860f55b3f16bea349a7d721e6d6abeeb4e5cf3
Another store to load forward block was detected coming from the function
FTransform.
FTransform save the output data 4 times 8 bytes each. when this data is
later being loaded by the QuantizeBlock function in one chunk of 16 bytes
that caused a store to load forward block.
The fix was done in the FTransform function where each two consecutive 8 bytes
were merged into one 16 bytes register and saved into the memory.
This fix gives ~21% function level gain and 1.6% user level gain.
Change-Id: Idc27c307d5083f3ebe206d3ca19059e5bd465992
ChunkVerifyAndAssign() expects to have at least 8 bytes to work with,
but was only checking for the presence of 4.
Change-Id: I8456b15d872de24a90c1e8fbfba463391ced5c7f
new options:
dwebp -alpha_dither
vwebp -noalphadither
When the source was marked as quantized, we use a threshold-averaging
filter to smooth the decoded alpha plane.
Note: this option forces the decoding of alpha data in one pass, and
might slow the decoding a bit.
The new field in WebPDecoderOptions struct is 'alpha_dithering_strength'
(0 by default, means: off). Max strength value is '100'.
Change-Id: I218e21af96360d4781587fede95f8ea4e2b7287a
Sometimes, the error-code was not set correctly.
We now return OUT_OF_MEMORY everytimes it's appropriate
(tested using MALLOC_FAIL_AT mechanism)
Took the opportunity to clean-up the code and dust the error
code returned (some were erroneously set to INVALID_CONFIGURATION)
Change-Id: I56f7331e2447557b3dd038e245daace4fc82214c
only 1 of <lib>_CPPFLAGS and AM_CPPFLAGS is used, with the former
getting precedence when it's defined. configure's DEFAULT_INCLUDES is
covering what's necessary given the include paths are all source
relative.
Change-Id: I7d14076acd266b28a88a3d92bcc3d7165284d5f3
this change has the side-effect of using directory names in the
include, silencing a lint warning.
Change-Id: Ib91cf63a90534e32fadfa5c2372bfdb29f854d02
if res->first = 1, coeffs[0]=0 because of quant.c:749 and line
added at quant.c:744
So, no need for the extra case.
Going forward, TrellisQuantizeBlock() should also be calling
a variant of VP8SetResidualCoeffs() to set the 'last' field.
also: fixes a warning for win64
+ slight speed-up
Change-Id: Ib24b611f7396d24aeb5b56dc74d5c39160f048f0
+ add a WEBP_HAVE_SSE2 to dsp.h
not all 32-bit toolchain configurations will have sse2 enabled by
default
Change-Id: I7c675e511581f93cf55c79f960fa7efa2df4987e
this is used to set WEBP_USE_AVX2 in files where the build flag won't be
used, i.e., dsp/enc.c, which enables VP8EncDspInitAVX2() to be called
Change-Id: I362f4ba39ca40d3e07a081292d5f743c649d9d7f
* remove LEFT/RIGHT_JUSTIFY distinction. It's all RIGHT_JUSTIFY now.
* simplify VP8GetSigned(), and add some masking branch-less code. Much
faster on ARM (~13% speed-up). 8% on x86-64, 5% on MacBook.
* split critical implementation into separate bit_reader_inl.h file that
is only included where needed (vp8.c / tree.c / bit_reader.c)
* bumped BITS value from 16 to 24 for x86-32b too, since it's a bit faster.
Change-Id: If41ca1da3e5c3dadacf2379d1ba419b151e7fce8
Extract loop invariant and avoid storing/loading samples
if they can be re-used. This is particularly interesting when
a transpose is involved (HFilter16i).
Change-Id: I93274620f6da220a35025ff8708ff0c9ee8c4139
The luminance needs to be pre- and post- multiplied by
the alpha value in case of rescaling, for proper averaging.
Also:
- removed util/alpha_processing and moved it to dsp/
- removed WebPInitPremultiply() which was mostly useless
and merged it with the new function WebPInitAlphaProcessing()
Change-Id: If089cefd4ec53f6880a791c476fb1c7f7c5a8e60
gcc was generating very complex code, one for each case of br->len_ values!
also, pretty-fy the mask constants
Change-Id: If62b1e8266f3fe5334517305113038d2ea8a6b42
VP8EncDspInitAVX2 is included in sse2 builds for now, later a configure
flag should be added to avoid the stub when avx2 is unavailable/disabled
Change-Id: I6127b687c273f46f41652aaf8e3b86ae3cfb8108
