happens surprisingly often at low quality, so we might
as well hard-code a simplified TransformWHT() directly.
Change-Id: Ib7a858ef74e8f334bd59d6512bf5bd3e455c5459
happens when decoding is partial (past Partition0), without error and
interrupted by calling WebPIDelete()
WebPIDelete() needs to call VP8ExitCritical() to free in-flight resources
Change-Id: Id4faef1b92f7edd8c17d642c58860e70dd570506
"src\enc\frame.c(88) : warning C4244: '=' : conversion from 'const double' to 'float', possible loss of data"
Change-Id: I143cb0bb6b69e1b8befe9b4f24b71adbc28095c2
The convergence algo is noticeably faster and more accurate.
Try it with: 'cwebp -size xxxxx -pass 8 ...' or 'cwebp -psnr 39 -pass 8 ...'
for instance
Allow full-looping with TokenBuffer case, and make the non-TokenBuffer
case match too.
In case Partition0 is likely to overflow, retry encoding with harder
limits on max_i4_header_bits_.
This CL should make -partition_limit option somewhat useless,
since the fix made automatically (albeit in a non-optimal way yet).
Change-Id: I46fde3564188b13b89d4cb69f847a5f24b8c735b
* fix VP8FixedCostsI4ÆÅ table
(the constant cost '211' was erronenously included)
* use the rd-score for '211' correctly (calling SetRDScore() for good)
* count partition0 bits separately during rd-opt
No meaningful difference in rd-curve.
Change-Id: I6c49a150cf28928d9a92c32fff097600d7145ca4
use of uint8_t type was causing error like:
src/dsp/upsampling.c:223:1: internal compiler error: in vect_determine_vectorization_factor, at tree-vect-loop.c:349
with gcc 4.6.3
Change-Id: Ieb6189a1375c47fc4ff992e6c09b34a7f1f605da
When -mt is used, the analysis pass will be split in two
and each halves performed in parallel. This gives a 5%-9% speed-up.
This was a good occasion to revamp the iterator and analysis-loop
code. As a result, the default (non-mt) behaviour is a tad (~1%) faster.
Change-Id: Id0828c2ebe2e968db8ca227da80af591d6a4055f
-pass 2 can be useful sometimes. More passes usually don't help more.
This change is a step toward being able to re-code the whole picture
with varying parameter (when token buffer is used).
Change-Id: Ia2538e2069a53c080e2ad248c18a1e04623a9304
* move yuv_in_/out_* scratch buffers to iterator
* add y_top_/uv_top_ shortcuts in iterator
That's ~3k of stack size instead of heap.
But it allows having several iterators work in parallel.
Change-Id: I6a437c0f2ef1e5d398c1d6a2fd4974fa0869f0c1
in_bits is const. Trying to apply bswap on it, one gets the error message:
error: read-only variable 'in_bits' used as 'asm' output
Change-Id: I0bef494b822c83d8ea87b1938b0e486d94de4742
The C-version gets ~7-8% slower in order to match the SSE2
output exactly. The old (now off-by-1) code is kept under
the WEBP_YUV_USE_TABLE flag for reference.
(note that calc rounding precision is slightly better ~= +0.02dB)
on ARM-neon, we somehow recover the ~4% speed that was lost by mimicking
the initial C-version (see https://gerrit.chromium.org/gerrit/#/c/41610)
Change-Id: Ia4363c5ed9b4c9edff5d932b002e57bb7814bf6f
If 'top' was meant to be NULL, then bottom and top can be
swapped. Logic is simpler.
+ fix compilation in non-FANCY_UPSAMPLING mode
Change-Id: I7c62bbb59454017f072c0945d1ff2d24d89286ff
Also created variant VP8LPrefixEncodeBits that returns the
code & extra_bits only.
There's no impact on compression density and compression speed.
Change-Id: I2cafdd3438ac9270cd72ad9d57b383cdddfdfa4c
WebPDemuxPartial() returns NULL for both of the following cases:
- There was a parsing error.
- It doesn't have enough data to start parsing.
Now, one can differentiate between these two cases by checking the value
of 'state' returned by WebPDemuxPartial().
Change-Id: Ia2377f0c516b3fcfae475c0662c4932d2eddcd0b
Earlier, all lossless images were assumed to contain alpha.
Now, we use the 'alpha_is_used' bit from the VP8L bitstream to determine
the
same.
Detecting an absence of alpha can sometimes lead to much more efficient
rendering, especially for animated images.
Related: refine mux code to read width/height/has_alpha information only
once
per frame/fragment. This avoid frequent calls to VP8(L)GetInfo().
Change-Id: I4e0eef4db7d94425396c7dff6ca5599d5bca8297
Speed up HashChainFindCopy by optimizing on number of calls to
FindMatchLength method.
This change speeds up the lossless & lossy (Alpha) encoding by 20%
without loss of compression density.
At method=3, lossy (Alpha) compression speed (and density) remains
unchanged, as at that settings, the costly Backward Refs method is not
called
Change-Id: Ia1797148e9e4ee2787011837fa248afbae2242cb
Disable costly 'BackwardReferencesTraceBackwards' for encoding Alpha plane.
Increase the threshold for triggering 'BackwardReferencesTraceBackwards' to
quality 25 and above. Also lower the Alpha quality (at method 3) to be
lesser than this threshold (25).
Change-Id: Ic29fb2e6943472c564223df9fe099b19ccda0f31
This speeds up WebP lossless decoding by 20%. In particular, the
photographic images get 35% speedup.
Change-Id: Idb94750342a140ec05df52c07e12be4bba335adc
speeds up those codes that are not part of the main lookup.
This gives a 10 % speedup for a photographic image.
Change-Id: Ief54b0ad77db790a01314402ad351b40ac9a7be4
+ some revamp and cleanup of the alpha-filter trial loop
+ EncodeAlphaInternal() now just takes a FilterTrial param
Change-Id: Ief84385083b1cba02678bbcd3dbf707245ee962f
Specialize and simplify the alpha-decoding case, which is used when:
- no color-cache is use
- all red/blue/alpha values are the same (and hence their Huffman tree has
only 1 symbol. We don't need to consume any bits for reading these).
+ revamped the loop to use size_t and offsets instead of pointers.
~2-3% faster on Unix (gcc) but up to 25% faster lossy+alpha decoding
on Mac (llvm) and ARM.
Change-Id: I43c9688d1e4811cab0ecf0108a5b8f45781083e6
* 0.3.0: (57 commits)
update ChangeLog
Regression fix for alpha channels using color cache:
wicdec: silence a format warning
muxedit: silence some uninitialized warnings
update ChangeLog
update NEWS
bump version to 0.3.1
Revert "add WebPBlendAlpha() function to blend colors against background"
Simplify forward-WHT + SSE2 version
probe input file and quick-check for WebP format.
configure: improve gl/glut library test
update copyright text
configure: remove use of AS_VAR_APPEND
fix EXIF parsing in PNG
add doc precision for WebPPictureCopy() and WebPPictureView()
remove datatype qualifier for vmnv
fix a memory leak in gif2webp
fix two minor memory leaks in webpmux
remove some cruft from swig/libwebp.jar
README: update swig notes
...
Conflicts:
NEWS
examples/gif2webp.c
src/dec/alpha.c
src/dec/idec.c
src/dec/vp8l.c
src/enc/alpha.c
src/enc/vp8l.c
Change-Id: Ib202fad7825a090c3b3a5169acd171369cface47
+ split AllocateInternalBuffers() into two 32b/8b variants instead of
trying to do everything in one function.
Change-Id: I35cac9fcd990a2194c95da4b2a4046ca3a514343
Considering the fact that insert to/lookup from the color cache is always 32
bit, use DecodeImageData() variant in that case.
Conflicts:
src/dec/vp8l.c
Change-Id: I6c665a6cfbd9bd10651c1e82fa54e687cbd54a2b
(cherry picked from commit a37eff47d6)
src/mux/muxedit.c:490: warning: 'x_offset' may be used uninitialized in this function
src/mux/muxedit.c:490: warning: 'y_offset' may be used uninitialized in this function
Change-Id: I4fd27f717e59a556354d0560b633d0edafe7a4d8
(cherry picked from commit 14cd5c6c40)
Considering the fact that insert to/lookup from the color cache is always 32
bit, use DecodeImageData() variant in that case.
Change-Id: I6c665a6cfbd9bd10651c1e82fa54e687cbd54a2b
src/mux/muxedit.c:490: warning: 'x_offset' may be used uninitialized in this function
src/mux/muxedit.c:490: warning: 'y_offset' may be used uninitialized in this function
Change-Id: I4fd27f717e59a556354d0560b633d0edafe7a4d8
src\dec\vp8l.c(816) : warning C4244: '=' : conversion from '__int64' to
'int', possible loss of data
src\dec\vp8l.c(817) : warning C4244: '=' : conversion from '__int64' to
'int', possible loss of data
Change-Id: I1d376d5dea909395bff8741aba16e8eed83a6e8f
no precision loss observed
speed is not really faster (0.5% at max), as forward-WHT isn't called often.
also: replaced a "int << 3" (undefined by C-spec) by a "int * 8"
( supersedes https://gerrit.chromium.org/gerrit/#/c/48739/ )
Change-Id: I2d980ec2f20f4ff6be5636105ff4f1c70ffde401
(cherry picked from commit 9c4ce971a8)
rather than symlink the webm/vpx terms, use the same header as libvpx to
reference in-tree files
based on the discussion in:
https://codereview.chromium.org/12771026/
Change-Id: Ia3067ecddefaa7ee01550136e00f7b3f086d4af4
(cherry picked from commit d640614d54)
output picture object is overwritten, not free'd or destroyed.
Change-Id: Ibb47ab444063e7ad90ff3d296260807ffe7ddbf9
(cherry picked from commit 23d28e216d)
The auto-infer logic of detecting the 'Alpha' use case
(via check '(palette[i] & 0x00ff00ffu) != 0' is failing
for this corner case image with all black pixels (rgb = 0)
and different Alpha values.
-> switch generic use-LUT detection
Change-Id: I982a8b28c8bcc43e3dc68ac358f978a4bcc14c36
(cherry picked from commit afa3450c11)
Added 1 pixel cache for palette colors for faster lookup.
This will speedup images that require ApplyPalette by 6.5% for lossless
compression.
Change-Id: Id0c5174d797ffabdb09905c2ba76e60601b686f8
(cherry picked from commit 742110ccce)
* "declaration of ‘index’ shadows a global declaration [-Wshadow]"
* "signed and unsigned type in conditional expression [-Wsign-compare]"
Change-Id: I891182d919b18b6c84048486e0385027bd93b57d
(cherry picked from commit 87a4fca25f)
Earlier such images were using roughly 9 * width * height bytes for
decoding. Now, they take 6 * width * height memory.
Change-Id: Ie4a681ca5074d96d64f30b2597fafdca648dd8f7
(cherry picked from commit 64c844863a)
Simply get rid of an intermediate buffer of size width x height, by
using the fact that stride == width in this case.
Change-Id: I92376a2561a3beb6e723e8bcf7340c7f348e02c2
(cherry picked from commit edccd19436)
doing so is not part of ISO C; removes some pedantic warnings
Change-Id: I739ad8c5cacc133e2546e9f45c0db9d92fb93d7e
(cherry picked from commit 96e948d7b0)
The output surface CAN be changed inbetween calls to
WebPIUpdate() or WebPIAppend(), but with precautions.
Change-Id: I899afbd95738a6a8e0e7000f8daef3e74c99ddd8
(cherry picked from commit ff885bfe1f)
This applies to images with optional chunks (e.g. images with ALPH
chunk,
ICCP chunk etc). Before this, the incremental decoding used to work like
non-incremental decoding for such files, that is, no rows were decoded
until
all data was available.
The change is in 2 parts:
- During optional chunk parsing, don't wait for the full VP8/VP8L chunk.
- Remap 'alpha_data' pointer whenever a new buffer is allocated/used in
WebPIAppend() and WebPIUpdate().
Change-Id: I6cfd6ca1f334b9c6610fcbf662cd85fa494f2a91
(cherry picked from commit ead4d47859)
Start VP8EncLoop/VP8EncTokenLoop only if VP8EncStartAlpha succeeded.
Change-Id: Id1faca3e6def88102329ae2b4974bd4d6d4c4a7a
(cherry picked from commit 67708d6701)
new option: -blend_alpha 0xrrggbb
also: don't force picture.use_argb value for lossless. Instead,
delay the YUVA<->ARGB conversion till WebPEncode() is called.
This make the blending more accurate when source is ARGB
and lossy compression is used (YUVA).
This has an effect on cropping/rescaling. E.g. for PNG, these
are now done in ARGB colorspace instead of YUV when lossy compression
is used.
Change-Id: I18571f1b1179881737a8dbd23ad0aa8cddae3c6b
(cherry picked from commit e7d9548c9b)
Tuned the cross_color transform parameter (step) for lower quality
levels. This change gives speedup of 20% at lower qualities (25) and 10% at
moderate quality level (50) with a loss of 0.25% in compression density.
Also removed TODO for cross_color transform. Observed good correlation of
this with the predict transform.
Change-Id: I8a1044e9f24e6a5f84295c030fd444d0eec7d154
rather than symlink the webm/vpx terms, use the same header as libvpx to
reference in-tree files
based on the discussion in:
https://codereview.chromium.org/12771026/
Change-Id: Ia3067ecddefaa7ee01550136e00f7b3f086d4af4
The auto-infer logic of detecting the 'Alpha' use case
(via check '(palette[i] & 0x00ff00ffu) != 0' is failing
for this corner case image with all black pixels (rgb = 0)
and different Alpha values.
-> switch generic use-LUT detection
Change-Id: I982a8b28c8bcc43e3dc68ac358f978a4bcc14c36
Added 1 pixel cache for palette colors for faster lookup.
This will speedup images that require ApplyPalette by 6.5% for lossless
compression.
Change-Id: Id0c5174d797ffabdb09905c2ba76e60601b686f8
'mem' was being offset once by DO_ALIGN() then shifted 'nz_size' which
would end up accounting for more than ALIGN_CST and exceed the allocation.
broken since:
9bf3129 align VP8Encoder::nz_ allocation
Change-Id: I04a4e0bbf80d909253ce057f8550ed98e0cf1054
* "declaration of ‘index’ shadows a global declaration [-Wshadow]"
* "signed and unsigned type in conditional expression [-Wsign-compare]"
Change-Id: I891182d919b18b6c84048486e0385027bd93b57d
Earlier such images were using roughly 9 * width * height bytes for
decoding. Now, they take 6 * width * height memory.
Change-Id: Ie4a681ca5074d96d64f30b2597fafdca648dd8f7
Simply get rid of an intermediate buffer of size width x height, by
using the fact that stride == width in this case.
Change-Id: I92376a2561a3beb6e723e8bcf7340c7f348e02c2
no precision loss observed
speed is not really faster (0.5% at max), as forward-WHT isn't called often.
also: replaced a "int << 3" (undefined by C-spec) by a "int * 8"
( supersedes https://gerrit.chromium.org/gerrit/#/c/48739/ )
Change-Id: I2d980ec2f20f4ff6be5636105ff4f1c70ffde401
it's not often the case, but could happen, that chroma has non-zero
coeff but luma hasn't. In such case, we should skip luma right away
Change-Id: I9515573ffaec8aad8b069d2c02ffbda4a6eff97c
Removed a call to WebPParseHeaders() inside VP8GetHeaders(). This was not needed
anyway, as all call flows already call WebPParseHeaders() before calling
VP8GetHeaders().
This avoids duplicate calls to WebPParseHeaders().
Change-Id: Icb2d618bd26c44220d956c17a69c9c45a62d5237
The output surface CAN be changed inbetween calls to
WebPIUpdate() or WebPIAppend(), but with precautions.
Change-Id: I899afbd95738a6a8e0e7000f8daef3e74c99ddd8
This applies to images with optional chunks (e.g. images with ALPH
chunk,
ICCP chunk etc). Before this, the incremental decoding used to work like
non-incremental decoding for such files, that is, no rows were decoded
until
all data was available.
The change is in 2 parts:
- During optional chunk parsing, don't wait for the full VP8/VP8L chunk.
- Remap 'alpha_data' pointer whenever a new buffer is allocated/used in
WebPIAppend() and WebPIUpdate().
Change-Id: I6cfd6ca1f334b9c6610fcbf662cd85fa494f2a91
new option: -blend_alpha 0xrrggbb
also: don't force picture.use_argb value for lossless. Instead,
delay the YUVA<->ARGB conversion till WebPEncode() is called.
This make the blending more accurate when source is ARGB
and lossy compression is used (YUVA).
This has an effect on cropping/rescaling. E.g. for PNG, these
are now done in ARGB colorspace instead of YUV when lossy compression
is used.
Change-Id: I18571f1b1179881737a8dbd23ad0aa8cddae3c6b
user can now call WebPEncode() with any YUVA or ARGB format, for
lossy or lossless compression
also: simplified error reporting, which is done in WebPPictureARGBToYUVA()
and WebPPictureYUVAToARGB()
Change-Id: Ifb68909217175bcf5a050e5c68d06de9849468f7
(cherry picked from commit 07d87bda1b)
transfer ownership of chunk passed in ChunkSetNth(). prevents freeing
the chunk in e.g., MuxImageParse() when a partial assignment (alpha but
no image) has occurred.
Change-Id: Ia69656b04fdf50f098f3816b54abd4e191248de3
Saturation was done on input coeff, not quantized one.
This saturation is not absolutely needed: output of FTransformWHT
is in range [-16320, 16321]. At quality 100, max quantization steps is 8,
so the maximal range used by QuantizeBlock() is [-2040, 2040].
But there's some extra bias (mtx->bias_[] and mtx->sharpen_[]) so
it's better to leave this saturation check for now.
addresses issue #145
Change-Id: I4b14f71cdc80c46f9eaadb2a4e8e03d396879d28
* merge cost calculation functions (BitsEntropy() and HuffmanCost())
* have HistogramAdd() specialized into separate functions
* use threshold to bail-out early
* revamp code a bit
* also: save memory by freeing free(histogram_image)
Change-Id: I8ee5d2cfa1462d5d6ea6361f5c89925a3720ef55
* VP8L shouldn't have an alpha chunk
* expect an animation to only contain frames, not a mix of image chunks
* enforce ANIM/ANMF order
* expect a full frame in a complete file
Change-Id: I953a8b6058f9bc00f1d042635548f158abdf6fce
subdirectories with more than one target can have the install targets
run in parallel with make -jN. group the shared headers in one place to
produce a common install target.
Change-Id: I1f3aa338a8ee6d681de1e5d0b2c6244d2c3d5451
Reported to eventually be 4% on ARM
(see https://code.google.com/p/webp/issues/detail?id=134 for details)
We might activate it selectively later...
Output values is not bitwise the same as the LUT-based
version, but difference is only +/-1 at max.
Change-Id: I1cc790ff4459885ed2ae2e72f31c5f3740095f07
this allows DLLs to be built under mingw and sets up a more obvious
dependency in the shared objects
Change-Id: I33e8a6132a16ca49563492438a1b3b74be9ed6a1
expands to e.g., -lpthread/-pthread, etc. if --enable-threading is used
and additional libs/flags are required
Change-Id: I8e8a7b44450bee32ddc58097e1e309d972b1092a
This is required for WebP lossy+Alpha images, where Alpha channel is taking
60-70% of the compression (CPU) cycles.
Also evaluated on 1000 PNG corpus and overall compression speed
is 15-40% better for lossy (PNG+Alpha) compression.
The pure lossless compression numbers are almost same (or little
better) with this change.
Change-Id: I9e5ae7372ed6227a9a5b64cd9cff84c747195a57
using token-buffer (that is: slightly more memory. O(output_size))
This change is ON by default. To return to previous behaviour, use
'cwebp -low_memory' or set config.low_memory to true.
Side-effect of this new mode: it forces 1 partition only (which was
default anyway), and makes some statistics about the bitstream
no longer available. cwebp will no longer report 'intra4-coeffs', etc.
This mode also doesn't work (yet) with multi-pass, and -low_memory
is currently forced for multi-pass.
also: reversed the flag: USE_TOKEN_BUFFER -> DISABLE_TOKEN_BUFFER
also: fixed the kAverageBytesPerMB estimate
Change-Id: I4ea80382038d6df4309663e0cb7bd88d9bca9cf1
When a ANMF/FRGM chunk size (read from file) is smaller than ANMF/FRGM header
size (which is constant and implicit), the parser should report an error.
Change-Id: I91d71889937f5133a97f1e83d5254cb2d7f37028
broken since:
ad25032 Merge "multi-threaded alpha encoding for lossy"
this produced an error due to an empty VP8TBuffer struct.
Change-Id: I640809d07d20092c1d660e2b59b58a62a12e4371
Also tweak the code for single image and fragmented image cases, so that
dmux->num_frames_ is always correct.
Change-Id: I31e6904222e4d96a54a0d8c8aa73d43b7a9094e7
new option: 'cwebp -mt ...'
new config flag: config.thread_level
(allowed thread_level are 0 or 1 for now. Maybe more later...)
If -mt is activated (and WEBP_USE_THREAD is used for compile), the alpha-compression
will be done in parallel to RGB coding for lossy. Can save quite a bit of latency...
Has no effect for lossless encoding.
Change-Id: I769d0bf90e7380cf99344ad62cd77277f4df5a46
It now returns ALPHA_FLAG for lossless images with alpha, that don't
have a VP8X chunk.
This is consistent with similar methods WebPMuxGetFeatures() and
WebPGetFeatures().
Change-Id: Ia3a4ca8f3e0f102f478bd33e0727ca5be98593df
larger values are still dealt with in the .cc
~5% faster encoding
Output size is slightly different (variably), because of
different floating-point calculation ordering.
Change-Id: I6ede18b09c753997cf78aa1199a807d9ddb5d4b4
-> split libraries further into decoder / encoder
-> add libwebpdecoder.a in Makefile.unix
-> make dwebp link against libwebpdecoder.a in Makefile.unix
also: in makefile.unix, pass EXTRA_FLAGS to LDFLAGS too
(otherwise, -m32 wouldn't work, e.g.)
Change-Id: Ief3da02a729dd86bbaf949ed048836716941657f
signed integer overflow behavior is undefined, split PrefixEncode() to
two branches to avoid this.
Change-Id: I6e2761d0d77f0aaceafdc4e07232e089c22beb64
* add SSE2 variant for lossless
* speed-up TransformColor calls using specialized TransformColorBlue/Red
* Fuse the Shannon Entropy calls to compute it for X and X+Y simultaneously.
This latter changes the output size a little bit.
Change-Id: Ie5df94da78bf51a58da859c9099b56340da9ec89
Simplify and re-organize the VP8L bit-reader functions
(e.g.: the 40-bit look-ahead code was helping much)
Speed-up with LBITS=64, on arm7-a:
=> before:
./dwebp_justify_24_neon -v bryce_ll.webp
Time to decode picture: 11.393s
File bryce_ll.webp can be decoded (dimensions: 11158 x 2156).
...
=> after (LBITS=64): Time to decode picture: 9.953s
making the VP8L bit-reader in 32 bit mode is going to be
harder (because we need to be able to read two symbols
at a time, each with max length 15 bits)
Change-Id: I89746fb103b87b5e2fd40a3208a6fbc584b88297
This flag will make the code use no uint64, no asm, and no fancy
trick, but instead aim at being as simple and straightforward as
possible.
Main use is to help emscripten generate proper JS code.
More code needs to be simplified later.
Also: tune the BITS values to be 24 and make use of WEBP_RIGHT_JUSTIFY
Here are the typical timing for decoding a large image:
ARM7-a:
dwebp_justify_32_neon Time to decode picture: 3.280s
dwebp_justify_24_neon Time to decode picture: 2.640s
dwebp_justify_16_neon Time to decode picture: 2.723s
dwebp_justify_8_neon Time to decode picture: 2.802s
dwebp_justify_32 Time to decode picture: 4.264s
dwebp_justify_24 Time to decode picture: 3.696s
dwebp_justify_16 Time to decode picture: 3.779s
dwebp_justify_8 Time to decode picture: 3.834s
dwebp_32_neon Time to decode picture: 4.010s
dwebp_24_neon Time to decode picture: 2.725s
dwebp_16_neon Time to decode picture: 2.852s
dwebp_8_neon Time to decode picture: 2.778s
dwebp_32 Time to decode picture: 4.587s
dwebp_24 Time to decode picture: 3.800s
dwebp_16 Time to decode picture: 3.902s
dwebp_8 Time to decode picture: 3.815s
REFERENCE (HEAD) Time to decode picture: 3.818s
x86_64:
dwebp_justify_32 Time to decode picture: 0.473s
dwebp_justify_24 Time to decode picture: 0.434s
dwebp_justify_16 Time to decode picture: 0.450s
dwebp_justify_8 Time to decode picture: 0.467s
dwebp_32 Time to decode picture: 0.474s
dwebp_24 Time to decode picture: 0.468s
dwebp_16 Time to decode picture: 0.468s
dwebp_8 Time to decode picture: 0.481s
REFERENCE (HEAD) Time to decode picture: 0.436s
i386:
dwebp_justify_32 Time to decode picture: 0.723s
dwebp_justify_24 Time to decode picture: 0.618s
dwebp_justify_16 Time to decode picture: 0.626s
dwebp_justify_8 Time to decode picture: 0.651s
dwebp_32 Time to decode picture: 0.744s
dwebp_24 Time to decode picture: 0.627s
dwebp_16 Time to decode picture: 0.642s
dwebp_8 Time to decode picture: 0.642s
Change-Id: Ie56c7235733a24f94fbfc2e4351aae36ec39c225
This option remaps internal parameters to better match
the expected compression curve of JPEG and produce output files
of similar size, but with better quality.
Change-Id: I96a1cbb480b1f6a0c6845a23c33dfd63f197b689
If it's not a partial file and parser returns PARSE_NEED_MORE_DATA, then
consider it to be PARSE_ERROR.
Change-Id: Id652a345bd2a9f574970272dd0a00517de113215
If a NULL pre-allocated buffer is passed, a buffer will be automatically
allocated.
+ add some parameter checks.
reported in http://code.google.com/p/webp/issues/detail?id=139
Change-Id: I9e14ed97db30ee12e46b5e92aac7eeaaeb99bfd5
store values to a temporary variable before calling functions that take
vector types.
removes non-standard constructs such as:
(uint8x8x2_t){{ a, b }}
fixing:
src/dsp/upsampling_neon.c:69:32: error: macro "vst2_u8" passed 3
arguments, but takes just 2
Change-Id: Ib4368e16e3a3efac18024f02be94e76243ade2dc
Fixes: https://code.google.com/p/webp/issues/detail?id=140
- along the lines of the SSE chroma upsampling.
Total speedup is ~30%.
4% speed loss on YuvToRgbXX conversion using tables instead
of 14-bit fixed precision. TODO(later): investigate, and compare
to x86.
see http://code.google.com/p/webp/issues/detail?id=134
Change-Id: Idc2261037cd13b4553ca20ecc4c4007099c37009
When the config option '--enable-libwebpdecoder' is specified, the
lean decoder library 'libwebpdecoder' will be created in addition to
libwebp. Also dwebp binary will be linked to libwebpdecoder, if this
config option is specified.
Change-Id: I9de3e149b59c9a8390fae2ba660941749640e54a
Actually, it turns out we now should never call these functions
with a zero size, otherwise something is wrong in the logic.
Change-Id: Ie414fcbec95486c169190470a71f2cff0843782a
also change lossless encoder logic, which was relying on explicit
NULL return from WebPSafeMalloc(0)
renamed function to CheckSizeArgumentsOverflow() explicitly
addresses issue #138
Change-Id: Ibbd51cc0281e60e86dfd4c5496274399e4c0f7f3
- precompute filtering strength once for all at the beginning
instead of per-macroblock
- reduce size of VP8MB struct from 8 bytes to 4.
- removed VP8StoreBlock() accordingly
Change-Id: Icf3d329473e21c464770be3d72a04c9ee4c321f2
GetCoeffs is (by far) the most consuming function of the decoder.
No speed change (unfortunately), but the main loop is somehow clearer.
Change-Id: I78f1c10cadc2c8696c041f5cbda86cab92cc6598
* treat the last coeff as a special case
* re-arrange the inner code to be shorter
* replace some VP8EncBands[n] by n, for n = 0 or 1
Change-Id: I71e17b014cffad7b073e787fde06260905a6953f
The main advantage is that you can avoid the use of uint64_t
some times, sticking to 32bit only.
Default still is BITS=32, this is mainly "in case".
Change-Id: Id694028793117ba822c37d46ef6c52fa0afed4ac
- Separate out mux.h and demux.h
- muxtypes.h: new header for data types common to mux/demux
- Move some misc read/write utilities to utils/utils.h
- Remove some duplicate methods.
- Separate out mux/demux libraries
Change-Id: If9b9569b10d55d922ad9317ef51710544315d6de
We don't need to use the exact forward transform,
since it's only a rough evaluation.
-> Removed some shifts and rounding constants.
Change-Id: I3fdf8b4fe9720473894155e1ad0345f4d1fd9a33
In particular, this removes any unnecessary FRGM/ANMF/ANIM chunks, and
indirectly leads to removal of unnecessary VP8X chunks as well.
This is especially useful for GIF to WebP conversion - it saves 56 bytes
(ANMF: 16+8 bytes, ANIM: 6+8 bytes, VP8X: 10+8 bytes) for non-animated GIFs.
Change-Id: I3b50a96ca585844c421b0fa4cd8593e52c3f95c5
This is a correction to the following change:
a00a3daf5b Use 'frgm' instead of 'tile' in
webpmux parameters
Change-Id: I8fa0bce98efdde38827fd25712017a98a6ea7388
- Allow a duration of 0
- Rename LOOP chunk to ANIM and add the background color field to it.
- Add a disposal method field for each animation frame.
- Modify webpmux.c binary interface to allow the input of background color
and disposal methods. Also make '-loop' and '-bgcolor' arguments optional
with some default values.
Change-Id: I807372a61cdb8a0d3080ae3552caf2848070bf4d
10-15% faster encoding.
Almost same output, binary wise. The main difference is
that we can't compute uv_alpha susceptibility, means there
can be subtle differences with different -sns values.
Change-Id: Id1b1a50929bf125b6372212fee1ed75a3bed975f
- Also, use the term 'fragments' instead of 'tiling' in code
- This makes code consistent with the spec.
Change-Id: Ibeccffc35db23bbedb88cc5e18e29e51621931f8
- Make ANMF and FRGM chunks hierarchical so that they encompass all chunks of
that frame.
- Use this in demuxer: stop parsing a frame if all image data for it isn't
available yet. Thus, we have a frame-level incremental support; that is,
all frames that are fully available can be parsed.
- Note: We still keep incremental support for single images - so that they can
be decoded with incremental decoding.
Change-Id: Id1585b16b06caee1d84009c42a25d2de29fa6135
Use separate fourCCs "XMP " and "EXIF" instead of a common "META"
Also, some refactorization in webpmux.c
Change-Id: Iad3337e5c1b81e785c60670ce28b1f536dd7ee31
Number of pairs selected are limited between 25% of histogram
images (at start) and number of histogram images left at any iteration.
Increase the range of iter_mult.
Removed min_cluster_size as parameter for tuning HistogramCombine.
Change-Id: Ia4068cd7af4d0f63c5af9001aceda8a40b9de740
* commit 'v0.2.1':
Update ChangeLog
update NEWS
bump version to 0.2.1
libwebp: validate chunk size in ParseOptionalChunks
cwebp (windows): fix alpha image import on XP
autoconf/libwebp: enable dll builds for mingw
[cd]webp: always output windows errors
fix double to float conversion warning
cwebp: fix jpg encodes on XP
VP8LAllocateHistogramSet: fix overflow in size calculation
GetHistoBits: fix integer overflow
EncodeImageInternal: fix uninitialized free
fix the -g/O3 discrepancy for 32bit compile
fix the BITS=8 case
Make *InitSSE2() functions be empty on non-SSE2 platform
make *InitSSE2() functions be empty on non-SSE2 platform
make VP8DspInitNEON() public
Conflicts:
src/Makefile.am
src/dsp/dec_neon.c
Change-Id: Iddc5152e4a6892db96c12d7c3f74adbc85fe6178
Contributed by Wayne Chen (datoudatou at gmail dot com)
+ some header cleanup
+ remove the NEON suffix in static functions
Change-Id: I75bf5e9b54cf5e1acc53764c6f081d61690f8e3d
(implements the backward and forward transforms in the encoder)
original patch by Wayne Chen (datoudatou at gmail dot com)
Change-Id: Ic00f3bffcdf7a924f043006728735c810ee47a57
- Changed the dynamic range where more aggressive
(BackwardReferencesTraceBackward) heuristic is run from quality > 10
(instead of quality > 25).
- Limit the backward-ref Window size to 16*width & 256*width for lower
qualities ([0, 25[ & [25, 50[) respectively, instead of 1M window.
- Evaluate the params for HashChainFindCopy outside this function call
and pass it, instead of recomputing them for every call.
Change-Id: If9eedfc14b978e7632d7cf69c96186e2910b0554
the max wasn't checked leading to a rollover case, possibly exploitable.
additionally check the RIFF size early, to avoid similar issues.
pulled from chromium:
http://codereview.chromium.org/11229048/
Change-Id: I4050b13a7e61ec023c0ef50958c45f651cf34c49
the multiplications done for total_size would be done with integers,
possibly overflowing, before being promoted to 64-bit for the addition
Change-Id: I32c3a6400fc2ef120c38e01a8693f4cb1727234d
huff_image_size was a size_t (=32 bits with 32-bit builds) which could
rollover causing an incorrectly sized allocation and a crash in lossless
encoding.
fixes issue #128
Change-Id: I0f20cee98c29b2b40b02607930b6b7a7ca56996d
