For large images overflowing the partition0, we re-do a number
of passes but were forgetting to reset the block_count[].
This was leading to incorrect summary.
+ some cosmetic fixes here and there
BUG=webp:355
Change-Id: Ie87158d7f177f8efdca429b146cfcd0e81652d2f
the incorrect bit was being extracted from the lossless bitstream header
causing the alpha flag in VP8X to be misreported. previously the
signature byte was ignored in the calculation of the offset.
since:
8ba1bf61 Stricter check for presence of alpha when writing lossless
images
BUG=webp:361
Change-Id: I7c618b5f01a37f5e4b799dee11a7949efaf88046
Make WebPPictureDistortion() only compute distortion on A/R/G/B planes, not Y/U/V(A).
(not just for SSIM, but PSNR too).
This is to avoid problems with using SSIM on U/V channels.
If Y/U/V distortion is needed, one can always use WebPPlaneDistortion() individually.
Change-Id: If8bc9c3ac12a8d2220f03224694fc389b16b7da9
Also introduce an always-failing 'reader' for unknown formats.
So we don't have to check reader==NULL, code is more regular.
-> We can get read of specific ReadPNG(), ReadJPEG(), ... declaration and use.
Change-Id: I290759705420878f00c7223c726d4ad404afd9c4
decoding and file i/o have been split to imageio, all that remains is
some string routines used for parameter parsing in the examples
Change-Id: I77386cd8aa39124b9e14c95fdbaa17ea4ab5bb24
-> WebPImageReader
Introduce a variant of image-guessing function that returns a reader
directly: WebPGuessImageReader()
Change-Id: I5ddc53024fcf941e33d997b2be6aa1a963d939ab
adds a generic examples/image_dec.[ch] entry point too.
WebPGuessImageType() can be used to infer image type.
Change-Id: I8337e7b6ad91863c9cf118e4791668d2d175079b
This is to prevent users shooting in the foot using -psnr or
-size alone and not getting the expected result.
Change-Id: I67a3289e4ec0a2a813c98807f2ec5e600f52dc63
we map the input file into memory, even in the non-stdin case.
This is less efficient than letting the png/jpeg/... decoding libraries
use fread()'s, but more general.
Change-Id: I4501cb9a1daf69593eb8e3326c115cd8cbdf92fd
-> read is a bit slower (memory allocation and such) than reading directly from disk.
-> we're not yet ready to accept stdin as input (-- -) because we still need to guess
the file type with GetImageType(). And since we can't rewind on stdin, this will need
a bit more work before being able to read from stdin.
Change-Id: I6491fac4b07d28d1854518325ead88669656ddbf
Rename the flag to exact instead of the opposite cleanup_alpha. Add the flag to
WebPConfig. Do the cleanup in the webp encoder library rather than the cwebp
binary, this will be needed for the next stage: smarter alpha cleanup for
better compression which cannot be done as a preprocessing due to depending on
predictor choices in the encoder.
Change-Id: I2fbf57f918a35f2da6186ef0b5d85e5fd0020eef
This is to infer the needed conversion to YUV(A) or RGB(A).
This is useful to avoid some conversion steps between ARGB and YUVA.
For instance, if the input file is a JPEG, we decode to RGB and
convert to YUV right away, without the intermediate step to ARGB.
The only caveat is that cropping/scaling might give slightly different result,
because of YUV420 downsampling. Therefore, we omit this feature
at cwebp level, when -crop or -rescale is used.
Change-Id: I5a3abe5108982f2a4570e841e3d9baffc73f5bee
using a *tmp_plane buffer to split a/r/g/b planes up appeared to
be the easiest route, compared to copy-pasting the whole code and
making it x_stride aware...
Change-Id: I0898ef1df62bd3e1713b77187b31b5eeef3832fe
Updated the near-lossless level mapping and make it correlated to lossy
quality i.e 100 => minimum loss (in-fact no-loss) and the visual-quality loss
increases with decrease in near-lossless level (quality) till value 0.
The new mapping implies following (PSNR) loss-metric:
-near_lossless 100: No-loss (bit-stream same as -lossless).
-near_lossless 80: Very very high PSNR (around 54dB).
-near_lossless 60: Very high PSNR (around 48dB).
-near_lossless 40: High PSNR (around 42dB).
-near_lossless 20: Moderate PSNR (around 36dB).
-near_lossless 0: Low PSNR (around 30dB).
Change-Id: I930de4b18950faf2868c97d42e9e49ba0b642960
Enable the WebP near-lossless feature by pre-processing the image to smoothen
the pixels.
On a 1000 PNG image corpus, for which WebP lossless (default settings) gets
25% compression gains, following is the performance of near-lossless feature
at various '-near_lossless' levels:
-near_lossless 90: 30% (very very high PSNR 54-60dB)
-near_lossless 75: 38% (very high PSNR 48-54dB)
-near_lossless 50: 45% (high PSNR 42-48dB)
-near_lossless 25: 48% (moderate PSNR 36-42dB)
-near_lossless 10: 50% (PSNR 30-36dB)
WebP near-lossless is specifically useful for discrete-tone images like
line-art, icons etc.
Change-Id: I7d12a2c9362ccd076d09710ea05c85fa64664c38
This compresses the uimage using lossless compression and controlable
decimating pre-process.
Code is under WEBP_EXPERIMENTAL_FEATURE while it's being experimented with.
Change-Id: I8b7f4cfcc3c6afc52a556102842bdbb045ed5ee8
this change has the side-effect of using directory names in the
include, silencing a lint warning.
Change-Id: Ib91cf63a90534e32fadfa5c2372bfdb29f854d02
there's still some malloc/free in the external example
This is an encoder API change because of the introduction
of WebPMemoryWriterClear() for symmetry reasons.
The MemoryWriter object should probably go in examples/ instead
of being in the main lib, though.
mux_types.h stil contain some inlined free()/malloc() that are
harder to remove (we need to put them in the libwebputils lib
and make sure link is ok). Left as a TODO for now.
Also: WebPDecodeRGB*() function are still returning a pointer
that needs to be free()'d. We should call WebPSafeFree() on
these, but it means exposing the whole mechanism. TODO(later).
Change-Id: Iad2c9060f7fa6040e3ba489c8b07f4caadfab77b
These are presets for lossless coding, similar to zlib.
The shortcut for lossless coding is now, e.g.:
cwebp -z 5 in.png -o out_lossless.webp
There are 10 possible values for -z parameter:
0 (fastest, lowest compression)
to 9 (slowest, best compression)
A reasonable tradeoff is -z 6, e.g.
-z 9 can be quite slow, so use with care.
This -z option is just a shortcut for some pre-defined
'-lossless -m xx -q yy' combinations.
Change-Id: I6ae716456456aea065469c916c2d5ca4d6c6cf04
