mirror of
https://xff.cz/git/u-boot/
synced 2025-10-31 10:26:10 +01:00
a36d86720f
Move axi timer driver from Microblaze to generic location. Origin implementation was irq based with counting down timer. CONFIG_TIMER drivers are designed differently that timer is free running up timer with automatic reload without any interrupt. Information about clock rates are find out in timer_pre_probe() that's why there is no need to get any additional information from DT in the driver itself (only register offset). Signed-off-by: Michal Simek <michal.simek@amd.com> Tested-by: Ovidiu Panait <ovidiu.panait@windriver.com> Link: https://lore.kernel.org/r/6c12fc86bbc1f17d05c25018862e7b7b03346b36.1654684731.git.michal.simek@amd.com
83 lines
2.0 KiB
C
83 lines
2.0 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2022 Advanced Micro Devices, Inc
|
|
* Michal Simek <michal.simek@amd.com>
|
|
*
|
|
* (C) Copyright 2007 Michal Simek
|
|
* Michal SIMEK <monstr@monstr.eu>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <timer.h>
|
|
#include <regmap.h>
|
|
#include <dm/device_compat.h>
|
|
|
|
#define TIMER_ENABLE_ALL 0x400 /* ENALL */
|
|
#define TIMER_PWM 0x200 /* PWMA0 */
|
|
#define TIMER_INTERRUPT 0x100 /* T0INT */
|
|
#define TIMER_ENABLE 0x080 /* ENT0 */
|
|
#define TIMER_ENABLE_INTR 0x040 /* ENIT0 */
|
|
#define TIMER_RESET 0x020 /* LOAD0 */
|
|
#define TIMER_RELOAD 0x010 /* ARHT0 */
|
|
#define TIMER_EXT_CAPTURE 0x008 /* CAPT0 */
|
|
#define TIMER_EXT_COMPARE 0x004 /* GENT0 */
|
|
#define TIMER_DOWN_COUNT 0x002 /* UDT0 */
|
|
#define TIMER_CAPTURE_MODE 0x001 /* MDT0 */
|
|
|
|
#define TIMER_CONTROL_OFFSET 0
|
|
#define TIMER_LOADREG_OFFSET 4
|
|
#define TIMER_COUNTER_OFFSET 8
|
|
|
|
struct xilinx_timer_priv {
|
|
struct regmap *regs;
|
|
};
|
|
|
|
static u64 xilinx_timer_get_count(struct udevice *dev)
|
|
{
|
|
struct xilinx_timer_priv *priv = dev_get_priv(dev);
|
|
u32 value;
|
|
|
|
regmap_read(priv->regs, TIMER_COUNTER_OFFSET, &value);
|
|
|
|
return value;
|
|
}
|
|
|
|
static int xilinx_timer_probe(struct udevice *dev)
|
|
{
|
|
struct xilinx_timer_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
/* uc_priv->clock_rate has already clock rate */
|
|
ret = regmap_init_mem(dev_ofnode(dev), &priv->regs);
|
|
if (ret) {
|
|
dev_dbg(dev, "failed to get regbase of timer\n");
|
|
return ret;
|
|
}
|
|
|
|
regmap_write(priv->regs, TIMER_LOADREG_OFFSET, 0);
|
|
regmap_write(priv->regs, TIMER_CONTROL_OFFSET, TIMER_RESET);
|
|
regmap_write(priv->regs, TIMER_CONTROL_OFFSET,
|
|
TIMER_ENABLE | TIMER_RELOAD);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct timer_ops xilinx_timer_ops = {
|
|
.get_count = xilinx_timer_get_count,
|
|
};
|
|
|
|
static const struct udevice_id xilinx_timer_ids[] = {
|
|
{ .compatible = "xlnx,xps-timer-1.00.a" },
|
|
{}
|
|
};
|
|
|
|
U_BOOT_DRIVER(xilinx_timer) = {
|
|
.name = "xilinx_timer",
|
|
.id = UCLASS_TIMER,
|
|
.of_match = xilinx_timer_ids,
|
|
.priv_auto = sizeof(struct xilinx_timer_priv),
|
|
.probe = xilinx_timer_probe,
|
|
.ops = &xilinx_timer_ops,
|
|
};
|