mirror of
				https://xff.cz/git/u-boot/
				synced 2025-10-31 18:35:42 +01:00 
			
		
		
		
	The R-Car3 SDHI should set these two bits in DMA_MODE register according to the specification, to indicate 64bit bus width. No other bus width options are permitted and the default value is 0, which is incorrect. Set the bits accordingly. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
		
			
				
	
	
		
			171 lines
		
	
	
		
			7.3 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			171 lines
		
	
	
		
			7.3 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /* SPDX-License-Identifier: GPL-2.0+ */
 | |
| /*
 | |
|  * Copyright (C) 2016 Socionext Inc.
 | |
|  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
 | |
|  */
 | |
| 
 | |
| #ifndef __TMIO_COMMON_H__
 | |
| #define __TMIO_COMMON_H__
 | |
| 
 | |
| #include <linux/bitops.h>
 | |
| #define TMIO_SD_CMD			0x000	/* command */
 | |
| #define   TMIO_SD_CMD_NOSTOP		BIT(14)	/* No automatic CMD12 issue */
 | |
| #define   TMIO_SD_CMD_MULTI		BIT(13)	/* multiple block transfer */
 | |
| #define   TMIO_SD_CMD_RD		BIT(12)	/* 1: read, 0: write */
 | |
| #define   TMIO_SD_CMD_DATA		BIT(11)	/* data transfer */
 | |
| #define   TMIO_SD_CMD_APP		BIT(6)	/* ACMD preceded by CMD55 */
 | |
| #define   TMIO_SD_CMD_NORMAL		(0 << 8)/* auto-detect of resp-type */
 | |
| #define   TMIO_SD_CMD_RSP_NONE		(3 << 8)/* response: none */
 | |
| #define   TMIO_SD_CMD_RSP_R1		(4 << 8)/* response: R1, R5, R6, R7 */
 | |
| #define   TMIO_SD_CMD_RSP_R1B		(5 << 8)/* response: R1b, R5b */
 | |
| #define   TMIO_SD_CMD_RSP_R2		(6 << 8)/* response: R2 */
 | |
| #define   TMIO_SD_CMD_RSP_R3		(7 << 8)/* response: R3, R4 */
 | |
| #define TMIO_SD_ARG			0x008	/* command argument */
 | |
| #define TMIO_SD_STOP			0x010	/* stop action control */
 | |
| #define   TMIO_SD_STOP_SEC		BIT(8)	/* use sector count */
 | |
| #define   TMIO_SD_STOP_STP		BIT(0)	/* issue CMD12 */
 | |
| #define TMIO_SD_SECCNT			0x014	/* sector counter */
 | |
| #define TMIO_SD_RSP10			0x018	/* response[39:8] */
 | |
| #define TMIO_SD_RSP32			0x020	/* response[71:40] */
 | |
| #define TMIO_SD_RSP54			0x028	/* response[103:72] */
 | |
| #define TMIO_SD_RSP76			0x030	/* response[127:104] */
 | |
| #define TMIO_SD_INFO1			0x038	/* IRQ status 1 */
 | |
| #define   TMIO_SD_INFO1_CD		BIT(5)	/* state of card detect */
 | |
| #define   TMIO_SD_INFO1_INSERT		BIT(4)	/* card inserted */
 | |
| #define   TMIO_SD_INFO1_REMOVE		BIT(3)	/* card removed */
 | |
| #define   TMIO_SD_INFO1_CMP		BIT(2)	/* data complete */
 | |
| #define   TMIO_SD_INFO1_RSP		BIT(0)	/* response complete */
 | |
| #define TMIO_SD_INFO2			0x03c	/* IRQ status 2 */
 | |
| #define   TMIO_SD_INFO2_ERR_ILA	BIT(15)	/* illegal access err */
 | |
| #define   TMIO_SD_INFO2_CBSY		BIT(14)	/* command busy */
 | |
| #define   TMIO_SD_INFO2_SCLKDIVEN	BIT(13)	/* command setting reg ena */
 | |
| #define   TMIO_SD_INFO2_BWE		BIT(9)	/* write buffer ready */
 | |
| #define   TMIO_SD_INFO2_BRE		BIT(8)	/* read buffer ready */
 | |
| #define   TMIO_SD_INFO2_DAT0		BIT(7)	/* SDDAT0 */
 | |
| #define   TMIO_SD_INFO2_ERR_RTO	BIT(6)	/* response time out */
 | |
| #define   TMIO_SD_INFO2_ERR_ILR	BIT(5)	/* illegal read err */
 | |
| #define   TMIO_SD_INFO2_ERR_ILW	BIT(4)	/* illegal write err */
 | |
| #define   TMIO_SD_INFO2_ERR_TO		BIT(3)	/* time out error */
 | |
| #define   TMIO_SD_INFO2_ERR_END	BIT(2)	/* END bit error */
 | |
| #define   TMIO_SD_INFO2_ERR_CRC	BIT(1)	/* CRC error */
 | |
| #define   TMIO_SD_INFO2_ERR_IDX	BIT(0)	/* cmd index error */
 | |
| #define TMIO_SD_INFO1_MASK		0x040
 | |
| #define TMIO_SD_INFO2_MASK		0x044
 | |
| #define TMIO_SD_CLKCTL			0x048	/* clock divisor */
 | |
| #define   TMIO_SD_CLKCTL_DIV_MASK	0x104ff
 | |
| #define   TMIO_SD_CLKCTL_DIV1024	BIT(16)	/* SDCLK = CLK / 1024 */
 | |
| #define   TMIO_SD_CLKCTL_DIV512	BIT(7)	/* SDCLK = CLK / 512 */
 | |
| #define   TMIO_SD_CLKCTL_DIV256	BIT(6)	/* SDCLK = CLK / 256 */
 | |
| #define   TMIO_SD_CLKCTL_DIV128	BIT(5)	/* SDCLK = CLK / 128 */
 | |
| #define   TMIO_SD_CLKCTL_DIV64		BIT(4)	/* SDCLK = CLK / 64 */
 | |
| #define   TMIO_SD_CLKCTL_DIV32		BIT(3)	/* SDCLK = CLK / 32 */
 | |
| #define   TMIO_SD_CLKCTL_DIV16		BIT(2)	/* SDCLK = CLK / 16 */
 | |
| #define   TMIO_SD_CLKCTL_DIV8		BIT(1)	/* SDCLK = CLK / 8 */
 | |
| #define   TMIO_SD_CLKCTL_DIV4		BIT(0)	/* SDCLK = CLK / 4 */
 | |
| #define   TMIO_SD_CLKCTL_DIV2		0	/* SDCLK = CLK / 2 */
 | |
| #define   TMIO_SD_CLKCTL_DIV1		BIT(10)	/* SDCLK = CLK */
 | |
| #define   TMIO_SD_CLKCTL_RCAR_DIV1	0xff	/* SDCLK = CLK (RCar ver.) */
 | |
| #define   TMIO_SD_CLKCTL_OFFEN		BIT(9)	/* stop SDCLK when unused */
 | |
| #define   TMIO_SD_CLKCTL_SCLKEN	BIT(8)	/* SDCLK output enable */
 | |
| #define TMIO_SD_SIZE			0x04c	/* block size */
 | |
| #define TMIO_SD_OPTION			0x050
 | |
| #define   TMIO_SD_OPTION_WIDTH_MASK	(5 << 13)
 | |
| #define   TMIO_SD_OPTION_WIDTH_1	(4 << 13)
 | |
| #define   TMIO_SD_OPTION_WIDTH_4	(0 << 13)
 | |
| #define   TMIO_SD_OPTION_WIDTH_8	(1 << 13)
 | |
| #define TMIO_SD_BUF			0x060	/* read/write buffer */
 | |
| #define TMIO_SD_EXTMODE		0x1b0
 | |
| #define   TMIO_SD_EXTMODE_DMA_EN	BIT(1)	/* transfer 1: DMA, 0: pio */
 | |
| #define TMIO_SD_SOFT_RST		0x1c0
 | |
| #define TMIO_SD_SOFT_RST_RSTX		BIT(0)	/* reset deassert */
 | |
| #define TMIO_SD_VERSION		0x1c4	/* version register */
 | |
| #define TMIO_SD_VERSION_IP		0xff	/* IP version */
 | |
| #define TMIO_SD_HOST_MODE		0x1c8
 | |
| #define TMIO_SD_IF_MODE		0x1cc
 | |
| #define   TMIO_SD_IF_MODE_DDR		BIT(0)	/* DDR mode */
 | |
| #define TMIO_SD_VOLT			0x1e4	/* voltage switch */
 | |
| #define   TMIO_SD_VOLT_MASK		(3 << 0)
 | |
| #define   TMIO_SD_VOLT_OFF		(0 << 0)
 | |
| #define   TMIO_SD_VOLT_330		(1 << 0)/* 3.3V signal */
 | |
| #define   TMIO_SD_VOLT_180		(2 << 0)/* 1.8V signal */
 | |
| #define TMIO_SD_DMA_MODE		0x410
 | |
| #define   TMIO_SD_DMA_MODE_DIR_RD	BIT(16)	/* 1: from device, 0: to dev */
 | |
| #define   TMIO_SD_DMA_MODE_BUS_WIDTH	(BIT(5) | BIT(4)) /* RCar, 64bit */
 | |
| #define   TMIO_SD_DMA_MODE_ADDR_INC	BIT(0)	/* 1: address inc, 0: fixed */
 | |
| #define TMIO_SD_DMA_CTL		0x414
 | |
| #define   TMIO_SD_DMA_CTL_START	BIT(0)	/* start DMA (auto cleared) */
 | |
| #define TMIO_SD_DMA_RST		0x418
 | |
| #define   TMIO_SD_DMA_RST_RD		BIT(9)
 | |
| #define   TMIO_SD_DMA_RST_WR		BIT(8)
 | |
| #define TMIO_SD_DMA_INFO1		0x420
 | |
| #define   TMIO_SD_DMA_INFO1_END_RD2	BIT(20)	/* DMA from device is complete (uniphier) */
 | |
| #define   TMIO_SD_DMA_INFO1_END_RD	BIT(17)	/* DMA from device is complete (renesas) */
 | |
| #define   TMIO_SD_DMA_INFO1_END_WR	BIT(16)	/* DMA to device is complete */
 | |
| #define TMIO_SD_DMA_INFO1_MASK		0x424
 | |
| #define TMIO_SD_DMA_INFO2		0x428
 | |
| #define   TMIO_SD_DMA_INFO2_ERR_RD	BIT(17)
 | |
| #define   TMIO_SD_DMA_INFO2_ERR_WR	BIT(16)
 | |
| #define TMIO_SD_DMA_INFO2_MASK		0x42c
 | |
| #define TMIO_SD_DMA_ADDR_L		0x440
 | |
| #define TMIO_SD_DMA_ADDR_H		0x444
 | |
| 
 | |
| /* alignment required by the DMA engine of this controller */
 | |
| #define TMIO_SD_DMA_MINALIGN		0x10
 | |
| 
 | |
| struct tmio_sd_plat {
 | |
| 	struct mmc_config		cfg;
 | |
| 	struct mmc			mmc;
 | |
| };
 | |
| 
 | |
| struct tmio_sd_priv {
 | |
| 	void __iomem			*regbase;
 | |
| 	unsigned int			version;
 | |
| 	u32				caps;
 | |
| 	u32				read_poll_flag;
 | |
| 	u32				idma_bus_width;
 | |
| #define TMIO_SD_CAP_NONREMOVABLE	BIT(0)	/* Nonremovable e.g. eMMC */
 | |
| #define TMIO_SD_CAP_DMA_INTERNAL	BIT(1)	/* have internal DMA engine */
 | |
| #define TMIO_SD_CAP_DIV1024		BIT(2)	/* divisor 1024 is available */
 | |
| #define TMIO_SD_CAP_64BIT		BIT(3)	/* Controller is 64bit */
 | |
| #define TMIO_SD_CAP_16BIT		BIT(4)	/* Controller is 16bit */
 | |
| #define TMIO_SD_CAP_RCAR_GEN2		BIT(5)	/* Renesas RCar version of IP */
 | |
| #define TMIO_SD_CAP_RCAR_GEN3		BIT(6)	/* Renesas RCar version of IP */
 | |
| #define TMIO_SD_CAP_RCAR_UHS		BIT(7)	/* Renesas RCar UHS/SDR modes */
 | |
| #define TMIO_SD_CAP_RCAR		\
 | |
| 	(TMIO_SD_CAP_RCAR_GEN2 | TMIO_SD_CAP_RCAR_GEN3)
 | |
| #ifdef CONFIG_DM_REGULATOR
 | |
| 	struct udevice *vqmmc_dev;
 | |
| #endif
 | |
| #if CONFIG_IS_ENABLED(CLK)
 | |
| 	struct clk			clk;
 | |
| #endif
 | |
| #if CONFIG_IS_ENABLED(RENESAS_SDHI)
 | |
| 	unsigned int			smpcmp;
 | |
| 	u8				tap_set;
 | |
| 	u8				tap_num;
 | |
| 	u8				nrtaps;
 | |
| 	bool				needs_adjust_hs400;
 | |
| 	bool				adjust_hs400_enable;
 | |
| 	u8				adjust_hs400_offset;
 | |
| 	u8				adjust_hs400_calibrate;
 | |
| 	u8				hs400_bad_tap;
 | |
| 	const u8			*adjust_hs400_calib_table;
 | |
| 	u32			quirks;
 | |
| #endif
 | |
| 	ulong (*clk_get_rate)(struct tmio_sd_priv *);
 | |
| };
 | |
| 
 | |
| int tmio_sd_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
 | |
| 		      struct mmc_data *data);
 | |
| int tmio_sd_set_ios(struct udevice *dev);
 | |
| int tmio_sd_get_cd(struct udevice *dev);
 | |
| 
 | |
| int tmio_sd_bind(struct udevice *dev);
 | |
| int tmio_sd_probe(struct udevice *dev, u32 quirks);
 | |
| 
 | |
| u32 tmio_sd_readl(struct tmio_sd_priv *priv, unsigned int reg);
 | |
| void tmio_sd_writel(struct tmio_sd_priv *priv,
 | |
| 		     u32 val, unsigned int reg);
 | |
| 
 | |
| #endif /* __TMIO_COMMON_H__ */
 |