mirror of
				https://xff.cz/git/u-boot/
				synced 2025-10-31 18:35:42 +01:00 
			
		
		
		
	This will allow the implementation to make use of data in the block_dev structure beyond the base device number. This will be useful so that eMMC block devices can encompass the HW partition ID rather than treating this out-of-band. Equally, the existence of the priv field is crying out for this patch to exist. Signed-off-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Tom Rini <trini@konsulko.com>
		
			
				
	
	
		
			496 lines
		
	
	
		
			12 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			496 lines
		
	
	
		
			12 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * (C) Copyright 2007-2011
 | |
|  * Allwinner Technology Co., Ltd. <www.allwinnertech.com>
 | |
|  * Aaron <leafy.myeh@allwinnertech.com>
 | |
|  *
 | |
|  * MMC driver for allwinner sunxi platform.
 | |
|  *
 | |
|  * SPDX-License-Identifier:	GPL-2.0+
 | |
|  */
 | |
| 
 | |
| #include <common.h>
 | |
| #include <errno.h>
 | |
| #include <malloc.h>
 | |
| #include <mmc.h>
 | |
| #include <asm/io.h>
 | |
| #include <asm/arch/clock.h>
 | |
| #include <asm/arch/cpu.h>
 | |
| #include <asm/arch/gpio.h>
 | |
| #include <asm/arch/mmc.h>
 | |
| #include <asm-generic/gpio.h>
 | |
| 
 | |
| struct sunxi_mmc_host {
 | |
| 	unsigned mmc_no;
 | |
| 	uint32_t *mclkreg;
 | |
| 	unsigned fatal_err;
 | |
| 	struct sunxi_mmc *reg;
 | |
| 	struct mmc_config cfg;
 | |
| };
 | |
| 
 | |
| /* support 4 mmc hosts */
 | |
| struct sunxi_mmc_host mmc_host[4];
 | |
| 
 | |
| static int sunxi_mmc_getcd_gpio(int sdc_no)
 | |
| {
 | |
| 	switch (sdc_no) {
 | |
| 	case 0: return sunxi_name_to_gpio(CONFIG_MMC0_CD_PIN);
 | |
| 	case 1: return sunxi_name_to_gpio(CONFIG_MMC1_CD_PIN);
 | |
| 	case 2: return sunxi_name_to_gpio(CONFIG_MMC2_CD_PIN);
 | |
| 	case 3: return sunxi_name_to_gpio(CONFIG_MMC3_CD_PIN);
 | |
| 	}
 | |
| 	return -EINVAL;
 | |
| }
 | |
| 
 | |
| static int mmc_resource_init(int sdc_no)
 | |
| {
 | |
| 	struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no];
 | |
| 	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 | |
| 	int cd_pin, ret = 0;
 | |
| 
 | |
| 	debug("init mmc %d resource\n", sdc_no);
 | |
| 
 | |
| 	switch (sdc_no) {
 | |
| 	case 0:
 | |
| 		mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC0_BASE;
 | |
| 		mmchost->mclkreg = &ccm->sd0_clk_cfg;
 | |
| 		break;
 | |
| 	case 1:
 | |
| 		mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC1_BASE;
 | |
| 		mmchost->mclkreg = &ccm->sd1_clk_cfg;
 | |
| 		break;
 | |
| 	case 2:
 | |
| 		mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC2_BASE;
 | |
| 		mmchost->mclkreg = &ccm->sd2_clk_cfg;
 | |
| 		break;
 | |
| 	case 3:
 | |
| 		mmchost->reg = (struct sunxi_mmc *)SUNXI_MMC3_BASE;
 | |
| 		mmchost->mclkreg = &ccm->sd3_clk_cfg;
 | |
| 		break;
 | |
| 	default:
 | |
| 		printf("Wrong mmc number %d\n", sdc_no);
 | |
| 		return -1;
 | |
| 	}
 | |
| 	mmchost->mmc_no = sdc_no;
 | |
| 
 | |
| 	cd_pin = sunxi_mmc_getcd_gpio(sdc_no);
 | |
| 	if (cd_pin >= 0) {
 | |
| 		ret = gpio_request(cd_pin, "mmc_cd");
 | |
| 		if (!ret) {
 | |
| 			sunxi_gpio_set_pull(cd_pin, SUNXI_GPIO_PULL_UP);
 | |
| 			ret = gpio_direction_input(cd_pin);
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	return ret;
 | |
| }
 | |
| 
 | |
| static int mmc_set_mod_clk(struct sunxi_mmc_host *mmchost, unsigned int hz)
 | |
| {
 | |
| 	unsigned int pll, pll_hz, div, n, oclk_dly, sclk_dly;
 | |
| 
 | |
| 	if (hz <= 24000000) {
 | |
| 		pll = CCM_MMC_CTRL_OSCM24;
 | |
| 		pll_hz = 24000000;
 | |
| 	} else {
 | |
| #ifdef CONFIG_MACH_SUN9I
 | |
| 		pll = CCM_MMC_CTRL_PLL_PERIPH0;
 | |
| 		pll_hz = clock_get_pll4_periph0();
 | |
| #else
 | |
| 		pll = CCM_MMC_CTRL_PLL6;
 | |
| 		pll_hz = clock_get_pll6();
 | |
| #endif
 | |
| 	}
 | |
| 
 | |
| 	div = pll_hz / hz;
 | |
| 	if (pll_hz % hz)
 | |
| 		div++;
 | |
| 
 | |
| 	n = 0;
 | |
| 	while (div > 16) {
 | |
| 		n++;
 | |
| 		div = (div + 1) / 2;
 | |
| 	}
 | |
| 
 | |
| 	if (n > 3) {
 | |
| 		printf("mmc %u error cannot set clock to %u\n",
 | |
| 		       mmchost->mmc_no, hz);
 | |
| 		return -1;
 | |
| 	}
 | |
| 
 | |
| 	/* determine delays */
 | |
| 	if (hz <= 400000) {
 | |
| 		oclk_dly = 0;
 | |
| 		sclk_dly = 0;
 | |
| 	} else if (hz <= 25000000) {
 | |
| 		oclk_dly = 0;
 | |
| 		sclk_dly = 5;
 | |
| #ifdef CONFIG_MACH_SUN9I
 | |
| 	} else if (hz <= 50000000) {
 | |
| 		oclk_dly = 5;
 | |
| 		sclk_dly = 4;
 | |
| 	} else {
 | |
| 		/* hz > 50000000 */
 | |
| 		oclk_dly = 2;
 | |
| 		sclk_dly = 4;
 | |
| #else
 | |
| 	} else if (hz <= 50000000) {
 | |
| 		oclk_dly = 3;
 | |
| 		sclk_dly = 4;
 | |
| 	} else {
 | |
| 		/* hz > 50000000 */
 | |
| 		oclk_dly = 1;
 | |
| 		sclk_dly = 4;
 | |
| #endif
 | |
| 	}
 | |
| 
 | |
| 	writel(CCM_MMC_CTRL_ENABLE | pll | CCM_MMC_CTRL_SCLK_DLY(sclk_dly) |
 | |
| 	       CCM_MMC_CTRL_N(n) | CCM_MMC_CTRL_OCLK_DLY(oclk_dly) |
 | |
| 	       CCM_MMC_CTRL_M(div), mmchost->mclkreg);
 | |
| 
 | |
| 	debug("mmc %u set mod-clk req %u parent %u n %u m %u rate %u\n",
 | |
| 	      mmchost->mmc_no, hz, pll_hz, 1u << n, div,
 | |
| 	      pll_hz / (1u << n) / div);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int mmc_clk_io_on(int sdc_no)
 | |
| {
 | |
| 	struct sunxi_mmc_host *mmchost = &mmc_host[sdc_no];
 | |
| 	struct sunxi_ccm_reg *ccm = (struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
 | |
| 
 | |
| 	debug("init mmc %d clock and io\n", sdc_no);
 | |
| 
 | |
| 	/* config ahb clock */
 | |
| 	setbits_le32(&ccm->ahb_gate0, 1 << AHB_GATE_OFFSET_MMC(sdc_no));
 | |
| 
 | |
| #ifdef CONFIG_SUNXI_GEN_SUN6I
 | |
| 	/* unassert reset */
 | |
| 	setbits_le32(&ccm->ahb_reset0_cfg, 1 << AHB_RESET_OFFSET_MMC(sdc_no));
 | |
| #endif
 | |
| #if defined(CONFIG_MACH_SUN9I)
 | |
| 	/* sun9i has a mmc-common module, also set the gate and reset there */
 | |
| 	writel(SUNXI_MMC_COMMON_CLK_GATE | SUNXI_MMC_COMMON_RESET,
 | |
| 	       SUNXI_MMC_COMMON_BASE + 4 * sdc_no);
 | |
| #endif
 | |
| 
 | |
| 	return mmc_set_mod_clk(mmchost, 24000000);
 | |
| }
 | |
| 
 | |
| static int mmc_update_clk(struct mmc *mmc)
 | |
| {
 | |
| 	struct sunxi_mmc_host *mmchost = mmc->priv;
 | |
| 	unsigned int cmd;
 | |
| 	unsigned timeout_msecs = 2000;
 | |
| 
 | |
| 	cmd = SUNXI_MMC_CMD_START |
 | |
| 	      SUNXI_MMC_CMD_UPCLK_ONLY |
 | |
| 	      SUNXI_MMC_CMD_WAIT_PRE_OVER;
 | |
| 	writel(cmd, &mmchost->reg->cmd);
 | |
| 	while (readl(&mmchost->reg->cmd) & SUNXI_MMC_CMD_START) {
 | |
| 		if (!timeout_msecs--)
 | |
| 			return -1;
 | |
| 		udelay(1000);
 | |
| 	}
 | |
| 
 | |
| 	/* clock update sets various irq status bits, clear these */
 | |
| 	writel(readl(&mmchost->reg->rint), &mmchost->reg->rint);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int mmc_config_clock(struct mmc *mmc)
 | |
| {
 | |
| 	struct sunxi_mmc_host *mmchost = mmc->priv;
 | |
| 	unsigned rval = readl(&mmchost->reg->clkcr);
 | |
| 
 | |
| 	/* Disable Clock */
 | |
| 	rval &= ~SUNXI_MMC_CLK_ENABLE;
 | |
| 	writel(rval, &mmchost->reg->clkcr);
 | |
| 	if (mmc_update_clk(mmc))
 | |
| 		return -1;
 | |
| 
 | |
| 	/* Set mod_clk to new rate */
 | |
| 	if (mmc_set_mod_clk(mmchost, mmc->clock))
 | |
| 		return -1;
 | |
| 
 | |
| 	/* Clear internal divider */
 | |
| 	rval &= ~SUNXI_MMC_CLK_DIVIDER_MASK;
 | |
| 	writel(rval, &mmchost->reg->clkcr);
 | |
| 
 | |
| 	/* Re-enable Clock */
 | |
| 	rval |= SUNXI_MMC_CLK_ENABLE;
 | |
| 	writel(rval, &mmchost->reg->clkcr);
 | |
| 	if (mmc_update_clk(mmc))
 | |
| 		return -1;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static void sunxi_mmc_set_ios(struct mmc *mmc)
 | |
| {
 | |
| 	struct sunxi_mmc_host *mmchost = mmc->priv;
 | |
| 
 | |
| 	debug("set ios: bus_width: %x, clock: %d\n",
 | |
| 	      mmc->bus_width, mmc->clock);
 | |
| 
 | |
| 	/* Change clock first */
 | |
| 	if (mmc->clock && mmc_config_clock(mmc) != 0) {
 | |
| 		mmchost->fatal_err = 1;
 | |
| 		return;
 | |
| 	}
 | |
| 
 | |
| 	/* Change bus width */
 | |
| 	if (mmc->bus_width == 8)
 | |
| 		writel(0x2, &mmchost->reg->width);
 | |
| 	else if (mmc->bus_width == 4)
 | |
| 		writel(0x1, &mmchost->reg->width);
 | |
| 	else
 | |
| 		writel(0x0, &mmchost->reg->width);
 | |
| }
 | |
| 
 | |
| static int sunxi_mmc_core_init(struct mmc *mmc)
 | |
| {
 | |
| 	struct sunxi_mmc_host *mmchost = mmc->priv;
 | |
| 
 | |
| 	/* Reset controller */
 | |
| 	writel(SUNXI_MMC_GCTRL_RESET, &mmchost->reg->gctrl);
 | |
| 	udelay(1000);
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int mmc_trans_data_by_cpu(struct mmc *mmc, struct mmc_data *data)
 | |
| {
 | |
| 	struct sunxi_mmc_host *mmchost = mmc->priv;
 | |
| 	const int reading = !!(data->flags & MMC_DATA_READ);
 | |
| 	const uint32_t status_bit = reading ? SUNXI_MMC_STATUS_FIFO_EMPTY :
 | |
| 					      SUNXI_MMC_STATUS_FIFO_FULL;
 | |
| 	unsigned i;
 | |
| 	unsigned *buff = (unsigned int *)(reading ? data->dest : data->src);
 | |
| 	unsigned byte_cnt = data->blocksize * data->blocks;
 | |
| 	unsigned timeout_msecs = byte_cnt >> 8;
 | |
| 	if (timeout_msecs < 2000)
 | |
| 		timeout_msecs = 2000;
 | |
| 
 | |
| 	/* Always read / write data through the CPU */
 | |
| 	setbits_le32(&mmchost->reg->gctrl, SUNXI_MMC_GCTRL_ACCESS_BY_AHB);
 | |
| 
 | |
| 	for (i = 0; i < (byte_cnt >> 2); i++) {
 | |
| 		while (readl(&mmchost->reg->status) & status_bit) {
 | |
| 			if (!timeout_msecs--)
 | |
| 				return -1;
 | |
| 			udelay(1000);
 | |
| 		}
 | |
| 
 | |
| 		if (reading)
 | |
| 			buff[i] = readl(&mmchost->reg->fifo);
 | |
| 		else
 | |
| 			writel(buff[i], &mmchost->reg->fifo);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int mmc_rint_wait(struct mmc *mmc, unsigned int timeout_msecs,
 | |
| 			 unsigned int done_bit, const char *what)
 | |
| {
 | |
| 	struct sunxi_mmc_host *mmchost = mmc->priv;
 | |
| 	unsigned int status;
 | |
| 
 | |
| 	do {
 | |
| 		status = readl(&mmchost->reg->rint);
 | |
| 		if (!timeout_msecs-- ||
 | |
| 		    (status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT)) {
 | |
| 			debug("%s timeout %x\n", what,
 | |
| 			      status & SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT);
 | |
| 			return TIMEOUT;
 | |
| 		}
 | |
| 		udelay(1000);
 | |
| 	} while (!(status & done_bit));
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| static int sunxi_mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
 | |
| 			      struct mmc_data *data)
 | |
| {
 | |
| 	struct sunxi_mmc_host *mmchost = mmc->priv;
 | |
| 	unsigned int cmdval = SUNXI_MMC_CMD_START;
 | |
| 	unsigned int timeout_msecs;
 | |
| 	int error = 0;
 | |
| 	unsigned int status = 0;
 | |
| 	unsigned int bytecnt = 0;
 | |
| 
 | |
| 	if (mmchost->fatal_err)
 | |
| 		return -1;
 | |
| 	if (cmd->resp_type & MMC_RSP_BUSY)
 | |
| 		debug("mmc cmd %d check rsp busy\n", cmd->cmdidx);
 | |
| 	if (cmd->cmdidx == 12)
 | |
| 		return 0;
 | |
| 
 | |
| 	if (!cmd->cmdidx)
 | |
| 		cmdval |= SUNXI_MMC_CMD_SEND_INIT_SEQ;
 | |
| 	if (cmd->resp_type & MMC_RSP_PRESENT)
 | |
| 		cmdval |= SUNXI_MMC_CMD_RESP_EXPIRE;
 | |
| 	if (cmd->resp_type & MMC_RSP_136)
 | |
| 		cmdval |= SUNXI_MMC_CMD_LONG_RESPONSE;
 | |
| 	if (cmd->resp_type & MMC_RSP_CRC)
 | |
| 		cmdval |= SUNXI_MMC_CMD_CHK_RESPONSE_CRC;
 | |
| 
 | |
| 	if (data) {
 | |
| 		if ((u32) data->dest & 0x3) {
 | |
| 			error = -1;
 | |
| 			goto out;
 | |
| 		}
 | |
| 
 | |
| 		cmdval |= SUNXI_MMC_CMD_DATA_EXPIRE|SUNXI_MMC_CMD_WAIT_PRE_OVER;
 | |
| 		if (data->flags & MMC_DATA_WRITE)
 | |
| 			cmdval |= SUNXI_MMC_CMD_WRITE;
 | |
| 		if (data->blocks > 1)
 | |
| 			cmdval |= SUNXI_MMC_CMD_AUTO_STOP;
 | |
| 		writel(data->blocksize, &mmchost->reg->blksz);
 | |
| 		writel(data->blocks * data->blocksize, &mmchost->reg->bytecnt);
 | |
| 	}
 | |
| 
 | |
| 	debug("mmc %d, cmd %d(0x%08x), arg 0x%08x\n", mmchost->mmc_no,
 | |
| 	      cmd->cmdidx, cmdval | cmd->cmdidx, cmd->cmdarg);
 | |
| 	writel(cmd->cmdarg, &mmchost->reg->arg);
 | |
| 
 | |
| 	if (!data)
 | |
| 		writel(cmdval | cmd->cmdidx, &mmchost->reg->cmd);
 | |
| 
 | |
| 	/*
 | |
| 	 * transfer data and check status
 | |
| 	 * STATREG[2] : FIFO empty
 | |
| 	 * STATREG[3] : FIFO full
 | |
| 	 */
 | |
| 	if (data) {
 | |
| 		int ret = 0;
 | |
| 
 | |
| 		bytecnt = data->blocksize * data->blocks;
 | |
| 		debug("trans data %d bytes\n", bytecnt);
 | |
| 		writel(cmdval | cmd->cmdidx, &mmchost->reg->cmd);
 | |
| 		ret = mmc_trans_data_by_cpu(mmc, data);
 | |
| 		if (ret) {
 | |
| 			error = readl(&mmchost->reg->rint) & \
 | |
| 				SUNXI_MMC_RINT_INTERRUPT_ERROR_BIT;
 | |
| 			error = TIMEOUT;
 | |
| 			goto out;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	error = mmc_rint_wait(mmc, 1000, SUNXI_MMC_RINT_COMMAND_DONE, "cmd");
 | |
| 	if (error)
 | |
| 		goto out;
 | |
| 
 | |
| 	if (data) {
 | |
| 		timeout_msecs = 120;
 | |
| 		debug("cacl timeout %x msec\n", timeout_msecs);
 | |
| 		error = mmc_rint_wait(mmc, timeout_msecs,
 | |
| 				      data->blocks > 1 ?
 | |
| 				      SUNXI_MMC_RINT_AUTO_COMMAND_DONE :
 | |
| 				      SUNXI_MMC_RINT_DATA_OVER,
 | |
| 				      "data");
 | |
| 		if (error)
 | |
| 			goto out;
 | |
| 	}
 | |
| 
 | |
| 	if (cmd->resp_type & MMC_RSP_BUSY) {
 | |
| 		timeout_msecs = 2000;
 | |
| 		do {
 | |
| 			status = readl(&mmchost->reg->status);
 | |
| 			if (!timeout_msecs--) {
 | |
| 				debug("busy timeout\n");
 | |
| 				error = TIMEOUT;
 | |
| 				goto out;
 | |
| 			}
 | |
| 			udelay(1000);
 | |
| 		} while (status & SUNXI_MMC_STATUS_CARD_DATA_BUSY);
 | |
| 	}
 | |
| 
 | |
| 	if (cmd->resp_type & MMC_RSP_136) {
 | |
| 		cmd->response[0] = readl(&mmchost->reg->resp3);
 | |
| 		cmd->response[1] = readl(&mmchost->reg->resp2);
 | |
| 		cmd->response[2] = readl(&mmchost->reg->resp1);
 | |
| 		cmd->response[3] = readl(&mmchost->reg->resp0);
 | |
| 		debug("mmc resp 0x%08x 0x%08x 0x%08x 0x%08x\n",
 | |
| 		      cmd->response[3], cmd->response[2],
 | |
| 		      cmd->response[1], cmd->response[0]);
 | |
| 	} else {
 | |
| 		cmd->response[0] = readl(&mmchost->reg->resp0);
 | |
| 		debug("mmc resp 0x%08x\n", cmd->response[0]);
 | |
| 	}
 | |
| out:
 | |
| 	if (error < 0) {
 | |
| 		writel(SUNXI_MMC_GCTRL_RESET, &mmchost->reg->gctrl);
 | |
| 		mmc_update_clk(mmc);
 | |
| 	}
 | |
| 	writel(0xffffffff, &mmchost->reg->rint);
 | |
| 	writel(readl(&mmchost->reg->gctrl) | SUNXI_MMC_GCTRL_FIFO_RESET,
 | |
| 	       &mmchost->reg->gctrl);
 | |
| 
 | |
| 	return error;
 | |
| }
 | |
| 
 | |
| static int sunxi_mmc_getcd(struct mmc *mmc)
 | |
| {
 | |
| 	struct sunxi_mmc_host *mmchost = mmc->priv;
 | |
| 	int cd_pin;
 | |
| 
 | |
| 	cd_pin = sunxi_mmc_getcd_gpio(mmchost->mmc_no);
 | |
| 	if (cd_pin < 0)
 | |
| 		return 1;
 | |
| 
 | |
| 	return !gpio_get_value(cd_pin);
 | |
| }
 | |
| 
 | |
| int sunxi_mmc_has_egon_boot_signature(struct mmc *mmc)
 | |
| {
 | |
| 	char *buf = malloc(512);
 | |
| 	int valid_signature = 0;
 | |
| 
 | |
| 	if (buf == NULL)
 | |
| 		panic("Failed to allocate memory\n");
 | |
| 
 | |
| 	if (mmc_getcd(mmc) && mmc_init(mmc) == 0 &&
 | |
| 	    mmc->block_dev.block_read(&mmc->block_dev, 16, 1, buf) == 1 &&
 | |
| 	    strncmp(&buf[4], "eGON.BT0", 8) == 0)
 | |
| 		valid_signature = 1;
 | |
| 
 | |
| 	free(buf);
 | |
| 	return valid_signature;
 | |
| }
 | |
| 
 | |
| static const struct mmc_ops sunxi_mmc_ops = {
 | |
| 	.send_cmd	= sunxi_mmc_send_cmd,
 | |
| 	.set_ios	= sunxi_mmc_set_ios,
 | |
| 	.init		= sunxi_mmc_core_init,
 | |
| 	.getcd		= sunxi_mmc_getcd,
 | |
| };
 | |
| 
 | |
| struct mmc *sunxi_mmc_init(int sdc_no)
 | |
| {
 | |
| 	struct mmc_config *cfg = &mmc_host[sdc_no].cfg;
 | |
| 
 | |
| 	memset(&mmc_host[sdc_no], 0, sizeof(struct sunxi_mmc_host));
 | |
| 
 | |
| 	cfg->name = "SUNXI SD/MMC";
 | |
| 	cfg->ops  = &sunxi_mmc_ops;
 | |
| 
 | |
| 	cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
 | |
| 	cfg->host_caps = MMC_MODE_4BIT;
 | |
| 	cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
 | |
| 	cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
 | |
| 
 | |
| 	cfg->f_min = 400000;
 | |
| 	cfg->f_max = 52000000;
 | |
| 
 | |
| 	if (mmc_resource_init(sdc_no) != 0)
 | |
| 		return NULL;
 | |
| 
 | |
| 	mmc_clk_io_on(sdc_no);
 | |
| 
 | |
| 	return mmc_create(cfg, &mmc_host[sdc_no]);
 | |
| }
 |