mirror of
https://xff.cz/git/u-boot/
synced 2025-10-31 18:35:42 +01:00
3e01ed00da
The definitions inside emif_defs.h concern davinci nand driver and should be in it's header. So create header file for davinci nand driver and move definitions from emif_defs.h and nand_defs.h to it. Acked-by: Vitaly Andrianov <vitalya@ti.com> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> [trini: Fixup more davinci breakage] Signed-off-by: Tom Rini <trini@ti.com>
210 lines
5.1 KiB
C
210 lines
5.1 KiB
C
/*
|
|
* Copyright (C) 2009 Nick Thompson, GE Fanuc, Ltd. <nick.thompson@gefanuc.com>
|
|
*
|
|
* Base on code from TI. Original Notices follow:
|
|
*
|
|
* (C) Copyright 2008, Texas Instruments, Inc. http://www.ti.com/
|
|
*
|
|
* Modified for DA8xx EVM.
|
|
*
|
|
* Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
|
|
*
|
|
* Parts are shamelessly stolen from various TI sources, original copyright
|
|
* follows:
|
|
* -----------------------------------------------------------------
|
|
*
|
|
* Copyright (C) 2004 Texas Instruments.
|
|
*
|
|
* ----------------------------------------------------------------------------
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
* ----------------------------------------------------------------------------
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <net.h>
|
|
#include <netdev.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/emac_defs.h>
|
|
#include <asm/arch/pinmux_defs.h>
|
|
#include <asm/io.h>
|
|
#include <nand.h>
|
|
#include <asm/ti-common/davinci_nand.h>
|
|
#include <asm/arch/davinci_misc.h>
|
|
|
|
#ifdef CONFIG_DAVINCI_MMC
|
|
#include <mmc.h>
|
|
#include <asm/arch/sdmmc_defs.h>
|
|
#endif
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static const struct pinmux_resource pinmuxes[] = {
|
|
#ifdef CONFIG_SPI_FLASH
|
|
PINMUX_ITEM(spi0_pins_base),
|
|
PINMUX_ITEM(spi0_pins_scs0),
|
|
PINMUX_ITEM(spi0_pins_ena),
|
|
#endif
|
|
PINMUX_ITEM(uart2_pins_txrx),
|
|
PINMUX_ITEM(i2c0_pins),
|
|
#ifdef CONFIG_USB_DA8XX
|
|
PINMUX_ITEM(usb_pins),
|
|
#endif
|
|
#ifdef CONFIG_USE_NAND
|
|
PINMUX_ITEM(emifa_pins),
|
|
PINMUX_ITEM(emifa_pins_cs0),
|
|
PINMUX_ITEM(emifa_pins_cs2),
|
|
PINMUX_ITEM(emifa_pins_cs3),
|
|
#endif
|
|
#if defined(CONFIG_DRIVER_TI_EMAC)
|
|
PINMUX_ITEM(emac_pins_rmii),
|
|
PINMUX_ITEM(emac_pins_mdio),
|
|
PINMUX_ITEM(emac_pins_rmii_clk_source),
|
|
#endif
|
|
#ifdef CONFIG_DAVINCI_MMC
|
|
PINMUX_ITEM(mmc0_pins_8bit)
|
|
#endif
|
|
};
|
|
|
|
static const struct lpsc_resource lpsc[] = {
|
|
{ DAVINCI_LPSC_AEMIF }, /* NAND, NOR */
|
|
{ DAVINCI_LPSC_SPI0 }, /* Serial Flash */
|
|
{ DAVINCI_LPSC_EMAC }, /* image download */
|
|
{ DAVINCI_LPSC_UART2 }, /* console */
|
|
{ DAVINCI_LPSC_GPIO },
|
|
#ifdef CONFIG_DAVINCI_MMC
|
|
{ DAVINCI_LPSC_MMC_SD },
|
|
#endif
|
|
|
|
};
|
|
|
|
#ifdef CONFIG_DAVINCI_MMC
|
|
static struct davinci_mmc mmc_sd0 = {
|
|
.reg_base = (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
|
|
.host_caps = MMC_MODE_8BIT,
|
|
.voltages = MMC_VDD_32_33 | MMC_VDD_33_34,
|
|
.version = MMC_CTLR_VERSION_2,
|
|
};
|
|
|
|
int board_mmc_init(bd_t *bis)
|
|
{
|
|
mmc_sd0.input_clk = clk_get(DAVINCI_MMCSD_CLKID);
|
|
|
|
printf("%x\n", mmc_sd0.input_clk);
|
|
|
|
/* Add slot-0 to mmc subsystem */
|
|
return davinci_mmc_init(bis, &mmc_sd0);
|
|
}
|
|
#endif
|
|
|
|
int board_init(void)
|
|
{
|
|
#ifndef CONFIG_USE_IRQ
|
|
irq_init();
|
|
#endif
|
|
|
|
#ifdef CONFIG_NAND_DAVINCI
|
|
/* EMIFA 100MHz clock select */
|
|
writel(readl(&davinci_syscfg_regs->cfgchip3) & ~2,
|
|
&davinci_syscfg_regs->cfgchip3);
|
|
/* NAND CS setup */
|
|
writel((DAVINCI_ABCR_WSETUP(0) |
|
|
DAVINCI_ABCR_WSTROBE(2) |
|
|
DAVINCI_ABCR_WHOLD(0) |
|
|
DAVINCI_ABCR_RSETUP(0) |
|
|
DAVINCI_ABCR_RSTROBE(2) |
|
|
DAVINCI_ABCR_RHOLD(0) |
|
|
DAVINCI_ABCR_TA(2) |
|
|
DAVINCI_ABCR_ASIZE_8BIT),
|
|
&davinci_emif_regs->ab2cr);
|
|
#endif
|
|
|
|
/* arch number of the board */
|
|
gd->bd->bi_arch_number = MACH_TYPE_DAVINCI_DA830_EVM;
|
|
|
|
/* address of boot parameters */
|
|
gd->bd->bi_boot_params = LINUX_BOOT_PARAM_ADDR;
|
|
|
|
/*
|
|
* Power on required peripherals
|
|
* ARM does not have access by default to PSC0 and PSC1
|
|
* assuming here that the DSP bootloader has set the IOPU
|
|
* such that PSC access is available to ARM
|
|
*/
|
|
if (da8xx_configure_lpsc_items(lpsc, ARRAY_SIZE(lpsc)))
|
|
return 1;
|
|
|
|
/* setup the SUSPSRC for ARM to control emulation suspend */
|
|
writel(readl(&davinci_syscfg_regs->suspsrc) &
|
|
~(DAVINCI_SYSCFG_SUSPSRC_EMAC | DAVINCI_SYSCFG_SUSPSRC_I2C |
|
|
DAVINCI_SYSCFG_SUSPSRC_SPI0 | DAVINCI_SYSCFG_SUSPSRC_TIMER0 |
|
|
DAVINCI_SYSCFG_SUSPSRC_UART2),
|
|
&davinci_syscfg_regs->suspsrc);
|
|
|
|
/* configure pinmux settings */
|
|
if (davinci_configure_pin_mux_items(pinmuxes, ARRAY_SIZE(pinmuxes)))
|
|
return 1;
|
|
|
|
/* enable the console UART */
|
|
writel((DAVINCI_UART_PWREMU_MGMT_FREE | DAVINCI_UART_PWREMU_MGMT_URRST |
|
|
DAVINCI_UART_PWREMU_MGMT_UTRST),
|
|
&davinci_uart2_ctrl_regs->pwremu_mgmt);
|
|
|
|
return(0);
|
|
}
|
|
|
|
|
|
#ifdef CONFIG_NAND_DAVINCI
|
|
int board_nand_init(struct nand_chip *nand)
|
|
{
|
|
davinci_nand_init(nand);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if defined(CONFIG_DRIVER_TI_EMAC)
|
|
|
|
#define PHY_SW_I2C_ADDR 0x5f /* Address of PHY on i2c bus */
|
|
|
|
/*
|
|
* Initializes on-board ethernet controllers.
|
|
*/
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
u_int8_t mac_addr[6];
|
|
u_int8_t switch_start_cmd[2] = { 0x01, 0x23 };
|
|
struct eth_device *dev;
|
|
|
|
/* Read Ethernet MAC address from EEPROM */
|
|
if (dvevm_read_mac_address(mac_addr))
|
|
/* set address env if not already set */
|
|
davinci_sync_env_enetaddr(mac_addr);
|
|
|
|
/* read the address back from env */
|
|
if (!eth_getenv_enetaddr("ethaddr", mac_addr))
|
|
return -1;
|
|
|
|
/* enable the Ethernet switch in the 3 port PHY */
|
|
if (i2c_write(PHY_SW_I2C_ADDR, 0, 0,
|
|
switch_start_cmd, sizeof(switch_start_cmd))) {
|
|
printf("Ethernet switch start failed!\n");
|
|
return -1;
|
|
}
|
|
|
|
/* finally, initialise the driver */
|
|
if (!davinci_emac_initialize()) {
|
|
printf("Error: Ethernet init failed!\n");
|
|
return -1;
|
|
}
|
|
|
|
dev = eth_get_dev();
|
|
|
|
/* provide the resulting addr to the driver */
|
|
memcpy(dev->enetaddr, mac_addr, 6);
|
|
dev->write_hwaddr(dev);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_DRIVER_TI_EMAC */
|