mirror of
				https://xff.cz/git/u-boot/
				synced 2025-10-31 10:26:10 +01:00 
			
		
		
		
	Pull the PL310 clearing code into common code, so it can be reused by Arria10. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chin Liang See <chin.liang.see@intel.com> Cc: Dalon Westergreen <dwesterg@gmail.com> Cc: Dinh Nguyen <dinguyen@kernel.org> Cc: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com> Cc: Tien Fong Chee <tien.fong.chee@intel.com>
		
			
				
	
	
		
			205 lines
		
	
	
		
			4.4 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			205 lines
		
	
	
		
			4.4 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| // SPDX-License-Identifier: GPL-2.0+
 | |
| /*
 | |
|  *  Copyright (C) 2012-2017 Altera Corporation <www.altera.com>
 | |
|  */
 | |
| 
 | |
| #include <common.h>
 | |
| #include <asm/io.h>
 | |
| #include <errno.h>
 | |
| #include <fdtdec.h>
 | |
| #include <linux/libfdt.h>
 | |
| #include <altera.h>
 | |
| #include <miiphy.h>
 | |
| #include <netdev.h>
 | |
| #include <watchdog.h>
 | |
| #include <asm/arch/misc.h>
 | |
| #include <asm/arch/reset_manager.h>
 | |
| #include <asm/arch/scan_manager.h>
 | |
| #include <asm/arch/system_manager.h>
 | |
| #include <asm/arch/nic301.h>
 | |
| #include <asm/arch/scu.h>
 | |
| #include <asm/pl310.h>
 | |
| 
 | |
| DECLARE_GLOBAL_DATA_PTR;
 | |
| 
 | |
| #ifdef CONFIG_SYS_L2_PL310
 | |
| static const struct pl310_regs *const pl310 =
 | |
| 	(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
 | |
| #endif
 | |
| 
 | |
| struct bsel bsel_str[] = {
 | |
| 	{ "rsvd", "Reserved", },
 | |
| 	{ "fpga", "FPGA (HPS2FPGA Bridge)", },
 | |
| 	{ "nand", "NAND Flash (1.8V)", },
 | |
| 	{ "nand", "NAND Flash (3.0V)", },
 | |
| 	{ "sd", "SD/MMC External Transceiver (1.8V)", },
 | |
| 	{ "sd", "SD/MMC Internal Transceiver (3.0V)", },
 | |
| 	{ "qspi", "QSPI Flash (1.8V)", },
 | |
| 	{ "qspi", "QSPI Flash (3.0V)", },
 | |
| };
 | |
| 
 | |
| int dram_init(void)
 | |
| {
 | |
| 	if (fdtdec_setup_mem_size_base() != 0)
 | |
| 		return -EINVAL;
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| void enable_caches(void)
 | |
| {
 | |
| #if !CONFIG_IS_ENABLED(SYS_ICACHE_OFF)
 | |
| 	icache_enable();
 | |
| #endif
 | |
| #if !CONFIG_IS_ENABLED(SYS_DCACHE_OFF)
 | |
| 	dcache_enable();
 | |
| #endif
 | |
| }
 | |
| 
 | |
| #ifdef CONFIG_SYS_L2_PL310
 | |
| void v7_outer_cache_enable(void)
 | |
| {
 | |
| 	struct udevice *dev;
 | |
| 
 | |
| 	if (uclass_get_device(UCLASS_CACHE, 0, &dev))
 | |
| 		pr_err("cache controller driver NOT found!\n");
 | |
| }
 | |
| 
 | |
| void v7_outer_cache_disable(void)
 | |
| {
 | |
| 	/* Disable the L2 cache */
 | |
| 	clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
 | |
| }
 | |
| 
 | |
| void socfpga_pl310_clear(void)
 | |
| {
 | |
| 	u32 mask = 0xff, ena = 0;
 | |
| 
 | |
| 	icache_enable();
 | |
| 
 | |
| 	/* Disable the L2 cache */
 | |
| 	clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
 | |
| 
 | |
| 	writel(0x0, &pl310->pl310_tag_latency_ctrl);
 | |
| 	writel(0x10, &pl310->pl310_data_latency_ctrl);
 | |
| 
 | |
| 	/* enable BRESP, instruction and data prefetch, full line of zeroes */
 | |
| 	setbits_le32(&pl310->pl310_aux_ctrl,
 | |
| 		     L310_AUX_CTRL_DATA_PREFETCH_MASK |
 | |
| 		     L310_AUX_CTRL_INST_PREFETCH_MASK |
 | |
| 		     L310_SHARED_ATT_OVERRIDE_ENABLE);
 | |
| 
 | |
| 	/* Enable the L2 cache */
 | |
| 	ena = readl(&pl310->pl310_ctrl);
 | |
| 	ena |= L2X0_CTRL_EN;
 | |
| 
 | |
| 	/*
 | |
| 	 * Invalidate the PL310 L2 cache. Keep the invalidation code
 | |
| 	 * entirely in L1 I-cache to avoid any bus traffic through
 | |
| 	 * the L2.
 | |
| 	 */
 | |
| 	asm volatile(
 | |
| 		".align	5			\n"
 | |
| 		"	b	3f		\n"
 | |
| 		"1:	str	%1,	[%4]	\n"
 | |
| 		"	dsb			\n"
 | |
| 		"	isb			\n"
 | |
| 		"	str	%0,	[%2]	\n"
 | |
| 		"	dsb			\n"
 | |
| 		"	isb			\n"
 | |
| 		"2:	ldr	%0,	[%2]	\n"
 | |
| 		"	cmp	%0,	#0	\n"
 | |
| 		"	bne	2b		\n"
 | |
| 		"	str	%0,	[%3]	\n"
 | |
| 		"	dsb			\n"
 | |
| 		"	isb			\n"
 | |
| 		"	b	4f		\n"
 | |
| 		"3:	b	1b		\n"
 | |
| 		"4:	nop			\n"
 | |
| 	: "+r"(mask), "+r"(ena)
 | |
| 	: "r"(&pl310->pl310_inv_way),
 | |
| 	  "r"(&pl310->pl310_cache_sync), "r"(&pl310->pl310_ctrl)
 | |
| 	: "memory", "cc");
 | |
| 
 | |
| 	/* Disable the L2 cache */
 | |
| 	clrbits_le32(&pl310->pl310_ctrl, L2X0_CTRL_EN);
 | |
| }
 | |
| #endif
 | |
| 
 | |
| #if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && \
 | |
| defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE)
 | |
| int overwrite_console(void)
 | |
| {
 | |
| 	return 0;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| #ifdef CONFIG_FPGA
 | |
| /* add device descriptor to FPGA device table */
 | |
| void socfpga_fpga_add(void *fpga_desc)
 | |
| {
 | |
| 	fpga_init();
 | |
| 	fpga_add(fpga_altera, fpga_desc);
 | |
| }
 | |
| #endif
 | |
| 
 | |
| int arch_cpu_init(void)
 | |
| {
 | |
| #ifdef CONFIG_HW_WATCHDOG
 | |
| 	/*
 | |
| 	 * In case the watchdog is enabled, make sure to (re-)configure it
 | |
| 	 * so that the defined timeout is valid. Otherwise the SPL (Perloader)
 | |
| 	 * timeout value is still active which might too short for Linux
 | |
| 	 * booting.
 | |
| 	 */
 | |
| 	hw_watchdog_init();
 | |
| #else
 | |
| 	/*
 | |
| 	 * If the HW watchdog is NOT enabled, make sure it is not running,
 | |
| 	 * for example because it was enabled in the preloader. This might
 | |
| 	 * trigger a watchdog-triggered reboot of Linux kernel later.
 | |
| 	 * Toggle watchdog reset, so watchdog in not running state.
 | |
| 	 */
 | |
| 	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 1);
 | |
| 	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 0);
 | |
| #endif
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| #ifndef CONFIG_SPL_BUILD
 | |
| static int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 | |
| {
 | |
| 	unsigned int mask = ~0;
 | |
| 
 | |
| 	if (argc < 2 || argc > 3)
 | |
| 		return CMD_RET_USAGE;
 | |
| 
 | |
| 	argv++;
 | |
| 
 | |
| 	if (argc == 3)
 | |
| 		mask = simple_strtoul(argv[1], NULL, 16);
 | |
| 
 | |
| 	switch (*argv[0]) {
 | |
| 	case 'e':	/* Enable */
 | |
| 		do_bridge_reset(1, mask);
 | |
| 		break;
 | |
| 	case 'd':	/* Disable */
 | |
| 		do_bridge_reset(0, mask);
 | |
| 		break;
 | |
| 	default:
 | |
| 		return CMD_RET_USAGE;
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| 
 | |
| U_BOOT_CMD(bridge, 3, 1, do_bridge,
 | |
| 	   "SoCFPGA HPS FPGA bridge control",
 | |
| 	   "enable [mask] - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
 | |
| 	   "bridge disable [mask] - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
 | |
| 	   ""
 | |
| );
 | |
| 
 | |
| #endif
 |