mirror of
https://xff.cz/git/u-boot/
synced 2025-10-31 02:15:45 +01:00
d8c67dc6e1
To add the DesignWare watchdog driver support. It required information such as register base address and clock info from configuration header file within include/configs folder. Signed-off-by: Chin Liang See <clsee@altera.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Albert Aribaud <albert.u.boot@aribaud.net> Cc: Heiko Schocher <hs@denx.de> Cc: Tom Rini <trini@ti.com>
75 lines
1.6 KiB
C
75 lines
1.6 KiB
C
/*
|
|
* Copyright (C) 2013 Altera Corporation <www.altera.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <watchdog.h>
|
|
#include <asm/io.h>
|
|
#include <asm/utils.h>
|
|
|
|
#define DW_WDT_CR 0x00
|
|
#define DW_WDT_TORR 0x04
|
|
#define DW_WDT_CRR 0x0C
|
|
|
|
#define DW_WDT_CR_EN_OFFSET 0x00
|
|
#define DW_WDT_CR_RMOD_OFFSET 0x01
|
|
#define DW_WDT_CR_RMOD_VAL 0x00
|
|
#define DW_WDT_CRR_RESTART_VAL 0x76
|
|
|
|
/*
|
|
* Set the watchdog time interval.
|
|
* Counter is 32 bit.
|
|
*/
|
|
static int designware_wdt_settimeout(unsigned int timeout)
|
|
{
|
|
signed int i;
|
|
|
|
/* calculate the timeout range value */
|
|
i = (log_2_n_round_up(timeout * CONFIG_DW_WDT_CLOCK_KHZ)) - 16;
|
|
if (i > 15)
|
|
i = 15;
|
|
if (i < 0)
|
|
i = 0;
|
|
|
|
writel((i | (i << 4)), (CONFIG_DW_WDT_BASE + DW_WDT_TORR));
|
|
return 0;
|
|
}
|
|
|
|
static void designware_wdt_enable(void)
|
|
{
|
|
writel(((DW_WDT_CR_RMOD_VAL << DW_WDT_CR_RMOD_OFFSET) |
|
|
(0x1 << DW_WDT_CR_EN_OFFSET)),
|
|
(CONFIG_DW_WDT_BASE + DW_WDT_CR));
|
|
}
|
|
|
|
static unsigned int designware_wdt_is_enabled(void)
|
|
{
|
|
unsigned long val;
|
|
val = readl((CONFIG_DW_WDT_BASE + DW_WDT_CR));
|
|
return val & 0x1;
|
|
}
|
|
|
|
#if defined(CONFIG_HW_WATCHDOG)
|
|
void hw_watchdog_reset(void)
|
|
{
|
|
if (designware_wdt_is_enabled())
|
|
/* restart the watchdog counter */
|
|
writel(DW_WDT_CRR_RESTART_VAL,
|
|
(CONFIG_DW_WDT_BASE + DW_WDT_CRR));
|
|
}
|
|
|
|
void hw_watchdog_init(void)
|
|
{
|
|
/* reset to disable the watchdog */
|
|
hw_watchdog_reset();
|
|
/* set timer in miliseconds */
|
|
designware_wdt_settimeout(CONFIG_HW_WATCHDOG_TIMEOUT_MS);
|
|
/* enable the watchdog */
|
|
designware_wdt_enable();
|
|
/* reset the watchdog */
|
|
hw_watchdog_reset();
|
|
}
|
|
#endif
|