RAM init on mt7622 based bananapi R64 is broken since v2023.10.
Increasing the mem-map does not help here, so i reduced the maximum
available ram in get_ram_size call from 2G to 1G (board has only 1G).
Fixes: 5fd6d4c7b3 ("arm: mediatek: retrieve ram_base from dts node for armv8 platform")
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Padmarao is leaving Microchip soon, and suggested that I should take
over maintaining the Icicle in U-Boot in his stead.
Suggested-by: Padmarao Begari <padmarao.begari@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Unfortunately when enabling FDT fixups for the AM62x family of SoCs and
moving TF-A to the bottom of RAM we missed the BeaglePlay. This is
causing Linux's memory allocator to clobber TF-A and break its boot.
Enable OF_SYSTEM_SETUP to fixup the kernel's FDT to inform it of the
actual location of the firmware
CC: Andrew Davis <afd@ti.com>
CC: Nishanth Menon <nm@ti.com>
CC: Robert Nelson <robertcnelson@gmail.com>
Reported-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Acked-by: Chirag Shilwant <c-shilwant@ti.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
When the EFI TCG measurement code moved from EFI to the TPM subsystem for
general use some prototypes changed from returning efi_status_t to int,
which is more appropriate for the non-EFI APIs. However, some of the
EFI callsites never changed and we ended up assigning the int value to
efi_status_t.
This is unlikely to cause any problems, apart from returning invalid
values on failures and violating the EFI spec.
A while back we moved the core functions of the EFI TCG protocol to the
TPM APIs in order for them to be used with bootm, booti etc.
Some prototypes changed from returning efi_status_t to int, which is more
appropriate for the non-EFI APIs. However, some of the EFI callsites never
changed and we ended up assigning the int value to efi_status_t.
This is unlikely to cause any problems, apart from returning invalid
values on failures and violating the EFI spec. Let's fix them
by looking at the new return code and map it to the proper EFI return
code on failures.
Fixes: commit 97707f12fd ("tpm: Support boot measurements")
Fixes: commit d6b55a420c ("efi_loader: startup the tpm device when installing the protocol")
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
We currently return 'No space left on device' if the eventlong buffer
we allocated is not enough. On a similar check later on that function
during the call to tcg2_log_init() we return 'No buffer space
available'. So switch both error codes to -ENOBUFS since we are always
checking a buffer and not a device.
Fixes: commit 97707f12fd ("tpm: Support boot measurements")
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Pull request doc-2024-07-rc5-2
Documentation:
* Fix broken references to pytest suite and test writing
* Fix links to FIT documentation
* Add capsule documentation for TI K3 devices
Added introductory documentation about capsule support for TI devices,
including links to more detailed information.
Also added a note in the build secction that points to the host package
dependency docs.
This patch is followup from a request in the series introducing capsule
update for TI boards.
https://lore.kernel.org/r/20240618145058.552eapp5iiz772ej@hardcore
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Add missing colon in :doc: link.
Fixes: fc32833145 ("doc: Explain briefly how to write new tests")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This should have been adapted directly with or after
v2021.01-693-gca6583d4e08 ("doc: move test/README to HTML
documentation") or v2021.01-694-g0157619d5c8 ("doc: move
test/py/README.md to HTML documentation") already.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
For some reason none of these debug prints have newlines, resulting in a
"fun" surprise when attempting to debug this driver.
The other parts of the dwc3 driver have newlines, add them here too (and
fix some minor nearby indent issues to make checkpatch happy).
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Marek Vasut <marex@denx.de>
The default value CYCLIC_MAX_CPU_TIME_US was 1000, which is
a little bit too low for slower hardware and sandbox.
On my MIPS Boston FPGA board with interaptiv CPU, wdt_cyclic
can easily take 3200 us to run.
On azure pipeline sandbox_clang, wdt_cyclic some times goes
beyond 1300 us.
Raise default value to 5000, which is the value already taken
by octeon_nic32. This is still sufficent to maintain system
responsiveness.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Pull request for u-boot-nand-20240617
The first patch is by Arseniy Krasnov and adds support for OTP area
access on MX30LFxG18AC chip series.
The second patch is by John Watts and adds MTD dependency in Kconfig
for UBI.
The last patch is by Ravi Minnikanti and fixes bitflip return value on
page read.
Make sure the OS would not get any spurious IWDG pretimeout IRQ
right after the system wakes up. This may happen in case the SoC
got woken up by another source than the IWDG pretimeout and the
pretimeout IRQ arrived immediately afterward, but too late to be
handled by the suspend main loop. In case either of the IWDG is
enabled, ping it first and then return to the OS.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Once a page is read with higher bitflips all subsequent reads
are returning the same bitflip value even though they have none.
max_bitflip variable is not being reset to 0 across page reads.
This is causing problems like incorrectly
marking erase blocks bad by UBI and causing read failures.
Verified the change with both MTD reads and UBI.
This change is inline with other NFC drivers.
Sample error log where a block is marked bad incorrectly:
ubi0: fixable bit-flip detected at PEB 125
ubi0: run torture test for PEB 125
ubi0: fixable bit-flip detected at PEB 125
ubi0 error: torture_peb: read problems on freshly erased PEB 125,
must be bad
ubi0 error: erase_worker: failed to erase PEB 125, error -5
ubi0: mark PEB 125 as bad
Link: https://lore.kernel.org/all/ea0422cd-a8e6-3c36-f551-a0142893301b@marvell.com
Signed-off-by: rminnikanti <rminnikanti@marvell.com>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: rminnikanti <rminnikanti@marvell.com>
Acked-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
We currently only describe the process to enable measured boot using
bootm. Describe the UEFI requirements as well which predate bootm.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The PC client spec [0], doesn't describe measurements for DTBs. It does
describe what do to for ACPI tables though.
There is a description for ACPI in 3.3.4.1 PCR[0] – SRTM, POST BIOS,
and Embedded Drivers and they explicitly mention ACPI in there. There's
no mention of ACPI in 3.3.4.2 PCR[1] – Host Platform Configuration.
However, in Figure 6 -- PCR Mapping of UEFI Components ACPI is shown
in PCR1. The general description also mentions PCR0 is for code and PCR1
is for data such as ACPI and SMBIOS.
So let's switch over the DTB measurements to PCR1 which seems a better
fit.
[0] https://trustedcomputinggroup.org/resource/pc-client-specific-platform-firmware-profile-specification
Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Eddie James <eajames@linux.ibm.com>
We moved our documentation to another hoster and therefore the URL
changed. Point to the latest documentation instead of release versions
to not link out-dated documentation.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
We moved our documentation to another hoster and therefore the URL
changed. Point to the latest documentation instead of release versions
to not link out-dated documentation.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
The timing upstream was wrong corresponding to the production.
This come evident after commit b614ddb5d3
(ddr: imx: Save the FW loading if it hasn't changed). This
change fix booting from usb
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Unlike fdt_node_check_compatible() which returns 0 if node is compatible,
ofnode_device_is_compatible() return true which is non-zero if node is
compatible. The intention of the code is to exit from the function in
case the node is not compatible with "micrel,ks8851-mll". Add the missing
invert into the conditional to reinstate original behavior.
This exposes a follow up problem caused by conversion to DM based FMC2 EBI
driver, where the FMC2 EBI is not configured when accessed by this code.
Probe the KS8851 MAC, which also configures the FMC2 EBI as a dependency,
so that the KS8851 MAC CCR register can be accessed over the FMC2 EBI bus
and checked for EEPROM present bit.
Fixes: 5a605b7c86 ("board: dhelectronics: stm32mp1: convert to livetree")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
There are two paths to reach this function, either through mkimage -l or
through dumpimage -l. The latter passes a NULL imagename while the
former passes an empty string. Therefore, let's make both tools behave
the same by handling the empty string the same way as for NULL.
Without this, the only way to get some information out of mkimage -l is
to provide "-n rk3399" for example, which isn't documented in the usage
of the tool.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
GPIO IOMUX control is located at PMU2_IOC or BUS_IOC offset on RK3588.
Based on Linux commit fdc33eba11c5 ("pinctrl/rockchip: add rk3588
support").
Compared to the Linux commit, this include a fix so that the iomux of
GPIO0_B4-D7 is reported correctly.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
GPIO0_C0-C4 iomux is set using PMUGRF_GPIO0C_IOMUX_L reg on RV1126. This
is indicated using the IOMUX_L_SOURCE_PMU flag. Fix reading current mux
by fully adopting the IOMUX_L_SOURCE_PMU related code in Linux kernel.
Based on Linux commit fd4ea48688c6 ("pinctrl: rockchip: Add RV1126
pinctrl support").
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
GPIO0_A0-A7 on RK3188 is IOMUX_GPIO_ONLY, however, trying to set gpio
mux return an -ENOTSUPP error code. Fix this by validating using the mux
function type and not the iomux flag.
Based on Linux commit c4a532dee6b6 ("pinctrl: rockchip: handle first
half of rk3188-bank0 correctly").
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
For the sake of consistency, make all internal (starting with _)
functions expect a pmic udevice instead of a regulator udevice.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org> # chromebook-bob
_ldo_get_suspend_value and _ldo_set_suspend_value get passed the parent
of the regulator (so the pmic) as first argument, therefore this udevice
should be used for pmic_* callbacks instead of using the parent of the
pmic.
To avoid further confusion, let's rename the argument to pmic instead of
dev, highlighting which kind of device we expect as argument.
Fixes: f047e4ab97 ("regulator: rk8xx: add indirection level for some ldo callbacks")
Reported-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org> # chromebook-bob
Some of the rgxx3 devices do not have a way to recover from a poor
flash of a bootloader to eMMC. Set the device to always attempt to boot
from sdmmc0 first which ensures that we can override the boot from
emmc if we have a card present with a valid fit signature. The
expectation is that this will protect from the very unlikely chance
we have a valid FIT signature on the eMMC but the U-Boot stage fails
for some other reason.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This reverts commit 41a60d0e5c.
On some of the supported devices the adc detect code always returns
that the button has been pushed, and as a result the device will
not boot normally.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
There's never been a -q or -s argument handled in the command, so let's
remove it. This was highlighted during review[1] but somehow still got
through.
While at it, slightly "reword" in the help text how the len + freq
arguments are defined. Indeed, len and freq work in pair, it is possible
to define none of either, n of both, or n - 1 of freq if there are n
len, in which case the freq that goes with the last len would be the n -
1 (and not the default of 400Hz if neither len nor freq is passed). I
assume this isn't what's expected but leaving it for another patch if
need be to fix what happens in that very odd scenario.
[1] https://lore.kernel.org/u-boot/CAPnjgZ0QWNqVFZfEWHxRcFOA3E3gRAZCYs77nGUXKL0pLp+JLQ@mail.gmail.com/
Fixes: ea58b9a404 ("cmd: allow sound command to play multiple sounds")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
