The auto-generated load options for media device do not contain a partition
node. We cannot expect the simple file protocol here.
Get the partition device-path via the loaded image protocol.
Fixes: e91b68fd6b ("efi_loader: load distro dtb in bootmgr")
Reported-by: E Shattow <lucent@gmail.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tested-by: E Shattow <lucent@gmail.com>
The only way to configure the load addresses for both bootimg and
vendor_bootimg is by using the "abootimg" command.
If we want to use the C API, there is no equivalent.
Add set_abootimg_addr() and set_avendor_bootimg_addr() so that we can
specify the load address from C.
This can be useful for implementing an Android bootmethod.
Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Reviewed-by: Julien Masson <jmasson@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Guillaume La Roque <glaroque@baylibre.com>
Tested-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Remove the leftover Amlogic GX/G12 bindings headers that
maked the v6.10 upstream DT fail to build.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
According to recently firmware handsoff spec [1]'s "Register usage at handoff
boundary", Transfer List's signature value was changed from 0x40_b10b
(3 bytes) to 4a0f_b10b (4 bytes).
As updating of TL's signature, register value of x1/r1 should be:
In aarch32's r1 value should be
R1[23:0]: set to the TL signature (4a0f_b10b -> masked range value: 0f_b10b)
R1[31:24]: version of the register convention == 1
and
In aarch64's x1 value should be
X1[31:0]: set to the TL signature (4a0f_b10b)
X1[39:32]: version of the register convention == 1
X1[63:40]: MBZ
(See the [2] and [3]).
This patch fix problems:
1. breaking X1 value with updated specification in aarch64
- change of length of signature field.
2. previous error value set in R1 in arm32.
- length of signature should be 24, but it uses 32bit signature.
This patch is a breaking change. It works only TF-A is updated.
Link: https://github.com/FirmwareHandoff/firmware_handoff [1]
Link: https://github.com/FirmwareHandoff/firmware_handoff/issues/32 [2]
Link: 5aa7aa1d3a [3]
Signed-off-by: Levi Yun <yeoreum.yun@arm.com>
Reviewed-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Instead of cluttering up a header file with a bunch of defines,
move the default environmental variables to a file called
am3517evm.env and reference it from the defconfig. Also
remove dead comments.
Signed-off-by: Adam Ford <aford173@gmail.com>
Vincent Stehlé <vincent.stehle@arm.com> says:
Hi,
This is a respin of this patch [1] after discussion [2]. Thanks to
Simon and Heinrich for their reviews.
To use the guidcmp() function, as suggested by Heinrich, we need to
make it available to bootmeth_cros.c and I think that the cleanest way
to do that is (arguably) to move the guid helper functions to efi.h
near the efi_guid_t definition; this is why the original patch has now
become a series of two patches.
The alternative would be to include efi_loader.h from bootmeth_cros.c
but I think this does not sound "right". If this is in fact the
preferred approach just let me know and I will respin.
There is no difference in the sandbox binaries before/after this
series on Arm and on PC, and all the tests I have run on the sandbox
are unchanged.
Enable USB host as well as USB gadget and DFU support for a53 and r5
configs. Also, enable UUU fastboot support to download files with
the UUU tool from a53.
Additionally, configure usb0 to peripheral mode and add extra
environment for DFU use.
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
- add support for compressed kernel for rk3308
- prepare support for fdtoverlay for rk3328
tested on ROCK Pi S 256MB, ROCK Pi E 2GB, and ROCK Pi 4A 4GB with
linux-next-20240613 defconfig kernel.
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
this is cosmetic change. no functional change is intended.
- remove redundant white spaces
- replace white spaces with tab
- align position of last letter/word
- sort lines in CFG_EXTRA_ENV_SETTINGS
- add comment after #endif
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The NanoPi R6S is a SBC by FriendlyElec based on the Rockchip RK3588s.
It comes with 4GB or 8GB of RAM, a microSD card slot, 32GB eMMC storage,
one RTL8211F 1GbE and two RTL8125 2.5GbE Ethernet ports, one USB 2.0
Type-A and one USB 3.0 Type-A port, a HDMI port, a 12-pin GPIO FPC
connector, a fan connector, IR receiver as well as some buttons and LEDs.
Add initial support for this board using the upstream devicetree sources.
Kernel commit:
f1b11f43b3e9 ("arm64: dts: rockchip: Add support for NanoPi R6S")
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Sebastian Kropatsch <seb-dev@mail.de>
The NanoPi R6C is a SBC by FriendlyElec based on the Rockchip RK3588s.
It comes with 4GB or 8GB of RAM, a microSD card slot, optional 32GB eMMC
storage, one M.2 M-Key connector, one RTL8211F 1GbE and one RTL8125
2.5GbE Ethernet port, one USB 2.0 Type-A and one USB 3.0 Type-A port, a
HDMI port, a 30-pin GPIO header as well as multiple buttons and LEDs.
Add initial support for this board using the upstream devicetree sources.
Tested in U-Boot proper:
- Booting from eMMC works
- 1GbE Ethernet works using the eth_eqos driver (tested by ping)
- 2.5GbE Ethernet works using the eth_rtl8169 driver (tested by ping),
but the status LEDs on this specific port currently aren't working
- NVMe SSD in M.2 socket does get recognized (tested with `nvme scan`
followed by `nvme details`)
Kernel commit:
d5f1d7437451 ("arm64: dts: rockchip: Add support for NanoPi R6C")
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Sebastian Kropatsch <seb-dev@mail.de>
No meaningful changes were made to this SoM since February 2021. Nobody
from Theobroma has booted anything recent on that product since July
2021 at the latest. The product isn't available to buy anymore and
disappeared from our website.
This product is therefore unmaintained and it would be disingenuous to
say the opposite, so drop support for RK3368 Lion.
If you're a user of Lion, feel free to revert this patch or contact our
sales/support department.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Manorit Chawdhry <m-chawdhry@ti.com> says:
fdtfile wasn't being populated in these boards in legacy boot using
bootcmd_ti_mmc, migrate these platforms to ti_set_fdt_env.
findfdt is used by bootcmd_ti_mmc by default which used to help populate
the fdtfile. The users of findfdt from bootcmd_ti_mmc have migrated to
ti_set_fdt_env for populating fdtfile; Hence, findfdt can be removed from
bootcmd_ti_mmc having no-impact for any platform.
Remove findfdt to not print out the warning that gets set after calling
ti_set_fdt_env. viz.
"echo WARN: fdtfile already set. Stop using findfdt in script"
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
name_fdt is kept for backward compatibility but it depends on EEPROM
detection logic and some of the TI K3 platforms don't have that anymore
which causes boot failure in legacy boot flow using bootcmd_ti_mmc.
K2g platforms which uses the same file have their own override causing
this change to be no-impact for them.
Replacing name_fdt usage to fdtfile as fdtfile is populated based on
CONFIG_DEFAULT_DEVICE_TREE after using ti_set_fdt_env.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Nothing really major here, some rework of the SPL PMIC drivers, adding
support for the AXP717 on the way, which is showing up on newer boards
now, most prominently some Anbernic handheld gaming devices. The rest
is enabling Ethernet and SPI boot on the Allwinner V3s SoC, plus two
fixes. This also updates the "traditional U-Boot" DTs to that of kernel
v6.9. I will look into upgrading some SoCs to dts/upstream in the
coming cycle, though this will not cover all SoCs for now, as we carry
some non-mainline fix to improve compatibility with older kernels. Will
see how it goes, but for now we stick with the "old way".
The branch survived the gitlab CI run, and Linux boot testing on some
selected boards.
- Switch to standard boot (in include/configs/ds414.h and
configs/ds414_defconfig)
- Implement board_late_init() to ensure successful enumeration
of USB3 devices
- Remove unnecessary checkboard()
- Updated IDENT_STRING to indicate this u-boot supports both Synology
DS414 and DS214+ boards
- Add SYS_THUMB_BUILD to reduce binary size
- Add NET_RANDOM_ETHADDR
- Add CONFIG_LBA48 and CONFIG_SYS_64BIT_LBA to support >2TB HDD/SDD
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Acked-by: Phil Sutter <phil@nwl.cc>
The X-Powers AXP717 is a PMIC with four buck converters and a number
of LDOs, one of which is actually fixed (so not modelled here).
Add the compatible string and the respective regulator ranges to allow
drivers to adjust voltages.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Ryan Walklin <ryan@testtoast.com>
The clock definitions in <dt-bindings/clock/r8a779?-clock.h> were
superseded by those in <dt-bindings/clock/r8a779?-cpg-mssr.h> a long
time ago.
In fact U-Boot never used <dt-bindings/clock/r8a779?-clock.h>.
The unused headers, their replacements, and the corresponding
r8a779?.dtsi files were introduced together in U-Boot v2018.03.
Fixes: 16b6e4aa37 ("ARM: dts: rmobile: Import R8A7790 DTS from Linux 4.15-rc8")
Fixes: edd15fcffb ("ARM: dts: rmobile: Import R8A7791 DTS from Linux 4.15-rc8")
Fixes: a3fb9ff3b3 ("ARM: dts: rmobile: Import R8A7792 DTS from Linux 4.15-rc8")
Fixes: 92aa099592 ("ARM: dts: rmobile: Import R8A7793 DTS from Linux 4.15-rc8")
Fixes: 9a26fc5a73 ("ARM: dts: rmobile: Import R8A7794 DTS from Linux 4.15-rc8")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Mojík <marek.mojik@nic.cz> says:
Hello all,
this is a continuation of previous work by Pali to add support for the
Turris 1.x board. As the patches were based on u-boot v2022.04, a
nontrivial rebasing was needed.
Some notes:
- Some options that are in SD defconfig are disabled in NOR defconfig
because over the years u-boot grew and the old NOR defconfig will not
fit into NOR memory.
- SD boot with RAM larger than 2GB will only allocate 2GB of RAM (We
were not able to fix this yet)
Add support for CZ.NIC Turris 1.x routers.
CZ.NIC Turris 1.0 (RTRS01) and 1.1 (RTRS02) are open source routers, they
have dual-core PowerPC Freescale P2020 CPU and are based on reference
Freescale P2020RDB-PC-A board design.
Hardware design is fully open source, all firmware and hardware design
files are available at Turris project website:
https://docs.turris.cz/hw/turris-1x/turris-1x/https://project.turris.cz/en/hardware.html
The P2020 BootROM can load U-Boot either from NOR flash or from SD card.
We add the new defconfigs, turris_1x_nor_defconfig, which configures
U-Boot for building the NOR image, and turris_1x_sdcard_defconfig, which
configures U-Boot for building an image suitable for SD card.
The defconfig for NOR image is stripped-down a - many config options
enabled in SD defconfig are disabled for NOR defconfig. This is because
U-Boot grew non-trivially in the last two years and it would not fit
into the space allocated for U-Boot in the NOR memory. In the future we
may try to use LTO to reduce the size of the code and enable more
options.
The design of CZ.NIC Turris 1.x routers is based on Freescale P2020RDB-PC-A
board, so some code from boards/freescale/p1_p2_rdb_pc is used and linked
into Turris 1.x board code.
Turris 1.x code in this patch uses modern distroboot and can boot Linux
kernel from various locations, including NAND, SD card, USB flash disks,
NVMe disks or SATA disks (connected to extra SATA/SCSI PCIe controllers).
Via distroboot is implemented also rescue NOR boot for factory recovery,
triggered by reset button, like on other existing Turris routers.
SD boot with RAM larger than 2GB will only allocate 2GB of RAM (We were
not able to fix this yet)
[ Because various CONFIG_ macros were migrated to Kconfig since the last
time this worked on upstream U-Boot (in 2022), a non-trivial rebasing
was needed and some issues were solved. ]
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Mojík <marek.mojik@nic.cz>
Reviewed-by: Marek Behún <kabel@kernel.org>
u-boot-dfu-20240711
Usb gadget:
- A welcome cleanup: epautoconf workaround is dropped to use
.match_ep() instead
- Introduce handle_interrupts() op for USB_GADGET_GENERIC, which
allows a per-driver interrupt handling
Fastboot:
- Fix mssing include when building with TCP only
- Add mvebu_espressobin_ultra-88f3720_defconfig (Benjamin)
- Update DTS for Thecus N2350 board (Tony)
- Add "old" Marvell DDR3 training for Armada 38x and Turris Omnia
(Marek)
- Misc turris_omnia changes (Marek)
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/21504
- Fixes for i.MX8M and i.MX93 clk-composite.
- Set CAN oscillator frequency based on model on verdin-imx8mm.
- Enable CAAM for phycore-imx8mp_defconfig.
- Miscellaneous improvements for Gateworks i.MX8M boards.
- Fix initramfs boot on msc_sm2s_imx8mp.
- Fixe EQoS on imx8mp-beacon-kit.
- Fix error message in fsl_esdhc_imx.
Currently, Armada 8k config header is setting boot devices and including
<config_distro_bootcmd.h> regardless of the CONFIG_DISTRO_DEFAULTS being
enabled or not, thus populating the environment for distro boot even on
devices that have no need for it.
So, lets simply respect the value of CONFIG_DISTRO_DEFAULTS.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Make public the clk_fetch_parent_index and rename it. This allow
us to be reused in driver specialization
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Booting an initramfs with the current initrd_addr address may lead to
initramfs corruption and boot failure.
Fix the initramfs problem by applying the following layout
suggested by Tom Rini:
loadaddr=0x40480000 --> Gets moved to 0x40600000 in run-time:
Uncompressing Kernel Image
Moving Image from 0x40480000 to 0x40600000, end=41e80000
fdt_addr_r= moved loadaddr + 128 MiB = 0x48600000
initrd_addr=fdt_addr_r + 512 KiB = 0x48680000
Signed-off-by: Fabio Estevam <festevam@denx.de>
Tested-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
This patch fixes the I225 hardware default value
at 0x15FD meaning empty flash image
or the NVM configuration loading failed
Signed-off-by: Marjolaine Amate <marjolaine.amate@odyssee-systemes.fr>
This patch adds support for Intel Foxville I226
devices LM,V,I,K in e1000 driver.
Signed-off-by: Marjolaine Amate <marjolaine.amate@odyssee-systemes.fr>
Some operating systems (e.g. seL4) and embedded applications are ELF
images. It is convenient to use FIT-images to implement trusted boot.
Added "elf" image type for booting using bootm command.
Signed-off-by: Maxim Moskalets <maximmosk4@gmail.com>
Various minor fixes and improvements:
* Fix Qualcomm SPMI v5 support
* Move default environment to a file
* Add support for special pins (e.g ufs/mmc reset/data pins)
* IPQ moves to OF_UPSTREAM and receives some cleanup and MAINTAINERS
changes
* Add a reset driver for devices without PSCI
* msm8916 USB clock improvements for mobile devices
Introduce .ops for USB_GADGET_GENERIC uclass. The first new ops is
.handle_interrupts which must be implemented by DM capable USB gadget
controller drivers and must implement interrupt handling similar to
dm_usb_gadget_handle_interrupts(). This patch currently provides weak
dm_usb_gadget_handle_interrupts() implementation which is overridden by
the drivers, but this will be removed once conversion to handle_interrupts
callback is complete.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # vim3
Link: https://lore.kernel.org/r/20240614005309.34433-2-marek.vasut+renesas@mailbox.org
[mkorpershoek: fixed trivial typo in commit message]
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Make use of CONFIG_DEFAULT_ENV_FILE and move the default qcom
environment to a file under board/qualcomm.
This is much cleaner and means we don't need to recompile on changing
the environment.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
The Lenovo IdeaPad Yoga 11 is a hybrid laptop/tablet Windows RT-based
computer released in late 2012. The device uses a 1.3 GHz quad-core
Nvidia Tegra 3 chipset with 2 GB of RAM, features a 11.6 inch 1366x768
screen and 32/64 GB of internal memory that can be supplemented with
a microSDXC card slot, full size SD card slot and 2 full size USB 2.0
ports.
Tested-by: Jethro Bull <jethrob@hotmail.com>
Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Surface RT is a hybrid tablet computer developed and manufactured
by Microsoft and shipped with Windows RT. The tablet uses a 1.3 GHz
quad-core Nvidia Tegra 3 chipset with 2 GB of RAM, features 10.8
inch 1366x768 screen and 32/64 GB of internal memory that can be
supplemented with a microSDXC card giving up to 200 GB of
additional storage.
Tested-by: Jethro Bull <jethrob@hotmail.com>
Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
WEXLER Tab 7t is a mini tablet computer developed by WEXLER that
runs the Android operating system. The device features a 7.0-inch
(180 mm) HD display, an Nvidia Tegra 3 quad-core chip, 1 GB of RAM,
8, 16 or 32 GB of storage that can be supplemented with a microSDXC
card giving up to 64 GB of additional storage and a full size USB
port.
Tested-by: Maksim Kurnosenko <asusx2@mail.ru>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
The Asus Eee Pad Transformer family are 2-in-1 detachable/slider
tablets developed by Asus that run the Android operating system.
The Eee Pad Transformers feature a 10.1-inch (260 mm) display,
an Nvidia Tegra 2 dual-core chip, 1 GB of RAM, and 16/32 GB of storage.
Transformers board derives from Nvidia Ventana development board.
This patch brings support for all 3 known T20 Transformers:
- Asus Eee Pad Transformer TF101
- Asus Eee Pad Transformer TF101G
- Asus Eee Pad Slider SL101
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101
Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com> # ASUS TF101
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
This ensures that the device can boot from a USB device prior to MMC. Useful
cases are when installing a new OS from USB while MMC still has a working OS
configuration or if the OS configuration is broken in late boot stages
(kernel boots but the system does not start).
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Jiaxun Yang <jiaxun.yang@flygoat.com> says:
Hi all,
This series enabled qemu-xtensa board.
For dc232b CPU it needs to be built with toolchain[1].
This is a side product of me investigating architectures
physical address != virtual address in U-Boot. Now we can
get it covered under CI and regular tests.
VirtIO devices are not working as expected, due to U-Boot's
assumption on VA == PA everywhere, I'm going to get this fixed
later.
My Xtensa knowledge is pretty limited, Xtensa people please
feel free to point out if I got anything wrong.
Thanks
[1]: https://github.com/foss-xtensa/toolchain/releases/download/2020.07/x86_64-2020.07-xtensa-dc232b-elf.tar.gz
