mirror of
https://xff.cz/git/u-boot/
synced 2025-10-31 02:15:45 +01:00
ARM: dts: rmobile: Import R8A7793 DTS from Linux 4.15-rc8
Import the Renesas R8A7793 DTS and headers from upstream Linux kernel v4.15-rc8, commit bebc6082da0a9f5d47a1ea2edc099bf671058bd4 . Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
This commit is contained in:
Marek Vasut
Marek Vasut
727
arch/arm/dts/r8a7793-gose.dts
Normal file
727
arch/arm/dts/r8a7793-gose.dts
Normal file
@@ -0,0 +1,727 @@
|
||||
/*
|
||||
* Device Tree Source for the Gose board
|
||||
*
|
||||
* Copyright (C) 2014-2015 Renesas Electronics Corporation
|
||||
*
|
||||
* SPDX-License-Identifier: GPL-2.0
|
||||
*/
|
||||
|
||||
/*
|
||||
* SSI-AK4643
|
||||
*
|
||||
* SW1: 1: AK4643
|
||||
* 2: CN22
|
||||
* 3: ADV7511
|
||||
*
|
||||
* This command is required when Playback/Capture
|
||||
*
|
||||
* amixer set "LINEOUT Mixer DACL" on
|
||||
* amixer set "DVC Out" 100%
|
||||
* amixer set "DVC In" 100%
|
||||
*
|
||||
* You can use Mute
|
||||
*
|
||||
* amixer set "DVC Out Mute" on
|
||||
* amixer set "DVC In Mute" on
|
||||
*
|
||||
* You can use Volume Ramp
|
||||
*
|
||||
* amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
|
||||
* amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
|
||||
* amixer set "DVC Out Ramp" on
|
||||
* aplay xxx.wav &
|
||||
* amixer set "DVC Out" 80% // Volume Down
|
||||
* amixer set "DVC Out" 100% // Volume Up
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "r8a7793.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Gose";
|
||||
compatible = "renesas,gose", "renesas,r8a7793";
|
||||
|
||||
aliases {
|
||||
serial0 = &scif0;
|
||||
serial1 = &scif1;
|
||||
};
|
||||
|
||||
chosen {
|
||||
bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory@40000000 {
|
||||
device_type = "memory";
|
||||
reg = <0 0x40000000 0 0x40000000>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
key-1 {
|
||||
gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_1>;
|
||||
label = "SW2-1";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-2 {
|
||||
gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_2>;
|
||||
label = "SW2-2";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-3 {
|
||||
gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_3>;
|
||||
label = "SW2-3";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-4 {
|
||||
gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_4>;
|
||||
label = "SW2-4";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-a {
|
||||
gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_A>;
|
||||
label = "SW30";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-b {
|
||||
gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_B>;
|
||||
label = "SW31";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-c {
|
||||
gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_C>;
|
||||
label = "SW32";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-d {
|
||||
gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_D>;
|
||||
label = "SW33";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-e {
|
||||
gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_E>;
|
||||
label = "SW34";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-f {
|
||||
gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_F>;
|
||||
label = "SW35";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
key-g {
|
||||
gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
|
||||
linux,code = <KEY_G>;
|
||||
label = "SW36";
|
||||
wakeup-source;
|
||||
debounce-interval = <20>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
led6 {
|
||||
gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
|
||||
label = "LED6";
|
||||
};
|
||||
led7 {
|
||||
gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
|
||||
label = "LED7";
|
||||
};
|
||||
led8 {
|
||||
gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
|
||||
label = "LED8";
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sdhi0: regulator-vcc-sdhi0 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "SDHI0 Vcc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vccq_sdhi0: regulator-vccq-sdhi0 {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "SDHI0 VccQ";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <1>;
|
||||
states = <3300000 1
|
||||
1800000 0>;
|
||||
};
|
||||
|
||||
vcc_sdhi1: regulator-vcc-sdhi1 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "SDHI1 Vcc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vccq_sdhi1: regulator-vccq-sdhi1 {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "SDHI1 VccQ";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <1>;
|
||||
states = <3300000 1
|
||||
1800000 0>;
|
||||
};
|
||||
|
||||
vcc_sdhi2: regulator-vcc-sdhi2 {
|
||||
compatible = "regulator-fixed";
|
||||
|
||||
regulator-name = "SDHI2 Vcc";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
vccq_sdhi2: regulator-vccq-sdhi2 {
|
||||
compatible = "regulator-gpio";
|
||||
|
||||
regulator-name = "SDHI2 VccQ";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
||||
gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
|
||||
gpios-states = <1>;
|
||||
states = <3300000 1
|
||||
1800000 0>;
|
||||
};
|
||||
|
||||
audio_clock: audio_clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <11289600>;
|
||||
};
|
||||
|
||||
rsnd_ak4643: sound {
|
||||
compatible = "simple-audio-card";
|
||||
|
||||
simple-audio-card,format = "left_j";
|
||||
simple-audio-card,bitclock-master = <&sndcodec>;
|
||||
simple-audio-card,frame-master = <&sndcodec>;
|
||||
|
||||
sndcpu: simple-audio-card,cpu {
|
||||
sound-dai = <&rcar_sound>;
|
||||
};
|
||||
|
||||
sndcodec: simple-audio-card,codec {
|
||||
sound-dai = <&ak4643>;
|
||||
clocks = <&audio_clock>;
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-in {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con_in: endpoint {
|
||||
remote-endpoint = <&adv7612_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-out {
|
||||
compatible = "hdmi-connector";
|
||||
type = "a";
|
||||
|
||||
port {
|
||||
hdmi_con_out: endpoint {
|
||||
remote-endpoint = <&adv7511_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
composite-in {
|
||||
compatible = "composite-video-connector";
|
||||
|
||||
port {
|
||||
composite_con_in: endpoint {
|
||||
remote-endpoint = <&adv7180_in>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
x2_clk: x2-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <74250000>;
|
||||
};
|
||||
|
||||
x13_clk: x13-clock {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <148500000>;
|
||||
};
|
||||
};
|
||||
|
||||
&du {
|
||||
pinctrl-0 = <&du_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>, <&cpg CPG_MOD 726>,
|
||||
<&x13_clk>, <&x2_clk>;
|
||||
clock-names = "du.0", "du.1", "lvds.0",
|
||||
"dclkin.0", "dclkin.1";
|
||||
|
||||
ports {
|
||||
port@0 {
|
||||
endpoint {
|
||||
remote-endpoint = <&adv7511_in>;
|
||||
};
|
||||
};
|
||||
port@1 {
|
||||
lvds_connector: endpoint {
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&extal_clk {
|
||||
clock-frequency = <20000000>;
|
||||
};
|
||||
|
||||
&pfc {
|
||||
pinctrl-0 = <&scif_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
i2c2_pins: i2c2 {
|
||||
groups = "i2c2";
|
||||
function = "i2c2";
|
||||
};
|
||||
|
||||
du_pins: du {
|
||||
groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
|
||||
function = "du";
|
||||
};
|
||||
|
||||
scif0_pins: scif0 {
|
||||
groups = "scif0_data_d";
|
||||
function = "scif0";
|
||||
};
|
||||
|
||||
scif1_pins: scif1 {
|
||||
groups = "scif1_data_d";
|
||||
function = "scif1";
|
||||
};
|
||||
|
||||
scif_clk_pins: scif_clk {
|
||||
groups = "scif_clk";
|
||||
function = "scif_clk";
|
||||
};
|
||||
|
||||
ether_pins: ether {
|
||||
groups = "eth_link", "eth_mdio", "eth_rmii";
|
||||
function = "eth";
|
||||
};
|
||||
|
||||
phy1_pins: phy1 {
|
||||
groups = "intc_irq0";
|
||||
function = "intc";
|
||||
};
|
||||
|
||||
sdhi0_pins: sd0 {
|
||||
groups = "sdhi0_data4", "sdhi0_ctrl";
|
||||
function = "sdhi0";
|
||||
power-source = <3300>;
|
||||
};
|
||||
|
||||
sdhi0_pins_uhs: sd0_uhs {
|
||||
groups = "sdhi0_data4", "sdhi0_ctrl";
|
||||
function = "sdhi0";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
sdhi1_pins: sd1 {
|
||||
groups = "sdhi1_data4", "sdhi1_ctrl";
|
||||
function = "sdhi1";
|
||||
power-source = <3300>;
|
||||
};
|
||||
|
||||
sdhi1_pins_uhs: sd1_uhs {
|
||||
groups = "sdhi1_data4", "sdhi1_ctrl";
|
||||
function = "sdhi1";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
sdhi2_pins: sd2 {
|
||||
groups = "sdhi2_data4", "sdhi2_ctrl";
|
||||
function = "sdhi2";
|
||||
power-source = <3300>;
|
||||
};
|
||||
|
||||
sdhi2_pins_uhs: sd2_uhs {
|
||||
groups = "sdhi2_data4", "sdhi2_ctrl";
|
||||
function = "sdhi2";
|
||||
power-source = <1800>;
|
||||
};
|
||||
|
||||
qspi_pins: qspi {
|
||||
groups = "qspi_ctrl", "qspi_data4";
|
||||
function = "qspi";
|
||||
};
|
||||
|
||||
sound_pins: sound {
|
||||
groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
|
||||
function = "ssi";
|
||||
};
|
||||
|
||||
sound_clk_pins: sound_clk {
|
||||
groups = "audio_clk_a";
|
||||
function = "audio_clk";
|
||||
};
|
||||
|
||||
vin0_pins: vin0 {
|
||||
groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
|
||||
function = "vin0";
|
||||
};
|
||||
|
||||
vin1_pins: vin1 {
|
||||
groups = "vin1_data8", "vin1_clk";
|
||||
function = "vin1";
|
||||
};
|
||||
};
|
||||
|
||||
ðer {
|
||||
pinctrl-0 = <ðer_pins &phy1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
phy-handle = <&phy1>;
|
||||
renesas,ether-link-active-low;
|
||||
status = "okay";
|
||||
|
||||
phy1: ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
interrupt-parent = <&irqc0>;
|
||||
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
|
||||
micrel,led-mode = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&cmt0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif0 {
|
||||
pinctrl-0 = <&scif0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif1 {
|
||||
pinctrl-0 = <&scif1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&scif_clk {
|
||||
clock-frequency = <14745600>;
|
||||
};
|
||||
|
||||
&sdhi0 {
|
||||
pinctrl-0 = <&sdhi0_pins>;
|
||||
pinctrl-1 = <&sdhi0_pins_uhs>;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
|
||||
vmmc-supply = <&vcc_sdhi0>;
|
||||
vqmmc-supply = <&vccq_sdhi0>;
|
||||
cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
|
||||
wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
|
||||
sd-uhs-sdr50;
|
||||
sd-uhs-sdr104;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhi1 {
|
||||
pinctrl-0 = <&sdhi1_pins>;
|
||||
pinctrl-1 = <&sdhi1_pins_uhs>;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
|
||||
vmmc-supply = <&vcc_sdhi1>;
|
||||
vqmmc-supply = <&vccq_sdhi1>;
|
||||
cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
|
||||
wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
|
||||
sd-uhs-sdr50;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdhi2 {
|
||||
pinctrl-0 = <&sdhi2_pins>;
|
||||
pinctrl-1 = <&sdhi2_pins_uhs>;
|
||||
pinctrl-names = "default", "state_uhs";
|
||||
|
||||
vmmc-supply = <&vcc_sdhi2>;
|
||||
vqmmc-supply = <&vccq_sdhi2>;
|
||||
cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
|
||||
sd-uhs-sdr50;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&qspi {
|
||||
pinctrl-0 = <&qspi_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
flash@0 {
|
||||
compatible = "spansion,s25fl512s", "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <30000000>;
|
||||
spi-tx-bus-width = <4>;
|
||||
spi-rx-bus-width = <4>;
|
||||
spi-cpol;
|
||||
spi-cpha;
|
||||
m25p,fast-read;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "loader";
|
||||
reg = <0x00000000 0x00040000>;
|
||||
read-only;
|
||||
};
|
||||
partition@40000 {
|
||||
label = "user";
|
||||
reg = <0x00040000 0x00400000>;
|
||||
read-only;
|
||||
};
|
||||
partition@440000 {
|
||||
label = "flash";
|
||||
reg = <0x00440000 0x03bc0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-0 = <&i2c2_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
|
||||
ak4643: codec@12 {
|
||||
compatible = "asahi-kasei,ak4643";
|
||||
#sound-dai-cells = <0>;
|
||||
reg = <0x12>;
|
||||
};
|
||||
|
||||
composite-in@20 {
|
||||
compatible = "adi,adv7180cp";
|
||||
reg = <0x20>;
|
||||
remote = <&vin1>;
|
||||
|
||||
port {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7180_in: endpoint {
|
||||
remote-endpoint = <&composite_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
adv7180_out: endpoint {
|
||||
bus-width = <8>;
|
||||
remote-endpoint = <&vin1ep>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi@39 {
|
||||
compatible = "adi,adv7511w";
|
||||
reg = <0x39>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
|
||||
|
||||
adi,input-depth = <8>;
|
||||
adi,input-colorspace = "rgb";
|
||||
adi,input-clock = "1x";
|
||||
adi,input-style = <1>;
|
||||
adi,input-justification = "evenly";
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7511_in: endpoint {
|
||||
remote-endpoint = <&du_out_rgb>;
|
||||
};
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
adv7511_out: endpoint {
|
||||
remote-endpoint = <&hdmi_con_out>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
hdmi-in@4c {
|
||||
compatible = "adi,adv7612";
|
||||
reg = <0x4c>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
||||
default-input = <0>;
|
||||
|
||||
port {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
adv7612_in: endpoint {
|
||||
remote-endpoint = <&hdmi_con_in>;
|
||||
};
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
adv7612_out: endpoint {
|
||||
remote-endpoint = <&vin0ep2>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
eeprom@50 {
|
||||
compatible = "renesas,r1ex24002", "atmel,24c02";
|
||||
reg = <0x50>;
|
||||
pagesize = <16>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
|
||||
pmic@58 {
|
||||
compatible = "dlg,da9063";
|
||||
reg = <0x58>;
|
||||
interrupt-parent = <&irqc0>;
|
||||
interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
|
||||
interrupt-controller;
|
||||
|
||||
rtc {
|
||||
compatible = "dlg,da9063-rtc";
|
||||
};
|
||||
|
||||
wdt {
|
||||
compatible = "dlg,da9063-watchdog";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&rcar_sound {
|
||||
pinctrl-0 = <&sound_pins &sound_clk_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
/* Single DAI */
|
||||
#sound-dai-cells = <0>;
|
||||
|
||||
status = "okay";
|
||||
|
||||
rcar_sound,dai {
|
||||
dai0 {
|
||||
playback = <&ssi0 &src2 &dvc0>;
|
||||
capture = <&ssi1 &src3 &dvc1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&ssi1 {
|
||||
shared-pin;
|
||||
};
|
||||
|
||||
/* HDMI video input */
|
||||
&vin0 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&vin0_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
port {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
vin0ep2: endpoint {
|
||||
remote-endpoint = <&adv7612_out>;
|
||||
bus-width = <24>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
pclk-sample = <1>;
|
||||
data-active = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* composite video input */
|
||||
&vin1 {
|
||||
pinctrl-0 = <&vin1_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
status = "okay";
|
||||
|
||||
port {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
vin1ep: endpoint {
|
||||
remote-endpoint = <&adv7180_out>;
|
||||
bus-width = <8>;
|
||||
};
|
||||
};
|
||||
};
|
||||
1332
arch/arm/dts/r8a7793.dtsi
Normal file
1332
arch/arm/dts/r8a7793.dtsi
Normal file
File diff suppressed because it is too large
Load Diff
167
include/dt-bindings/clock/r8a7793-clock.h
Normal file
167
include/dt-bindings/clock/r8a7793-clock.h
Normal file
@@ -0,0 +1,167 @@
|
||||
/*
|
||||
* r8a7793 clock definition
|
||||
*
|
||||
* Copyright (C) 2014 Renesas Electronics Corporation
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#ifndef __DT_BINDINGS_CLOCK_R8A7793_H__
|
||||
#define __DT_BINDINGS_CLOCK_R8A7793_H__
|
||||
|
||||
/* CPG */
|
||||
#define R8A7793_CLK_MAIN 0
|
||||
#define R8A7793_CLK_PLL0 1
|
||||
#define R8A7793_CLK_PLL1 2
|
||||
#define R8A7793_CLK_PLL3 3
|
||||
#define R8A7793_CLK_LB 4
|
||||
#define R8A7793_CLK_QSPI 5
|
||||
#define R8A7793_CLK_SDH 6
|
||||
#define R8A7793_CLK_SD0 7
|
||||
#define R8A7793_CLK_Z 8
|
||||
#define R8A7793_CLK_RCAN 9
|
||||
#define R8A7793_CLK_ADSP 10
|
||||
|
||||
/* MSTP0 */
|
||||
#define R8A7793_CLK_MSIOF0 0
|
||||
|
||||
/* MSTP1 */
|
||||
#define R8A7793_CLK_VCP0 1
|
||||
#define R8A7793_CLK_VPC0 3
|
||||
#define R8A7793_CLK_SSP1 9
|
||||
#define R8A7793_CLK_TMU1 11
|
||||
#define R8A7793_CLK_3DG 12
|
||||
#define R8A7793_CLK_2DDMAC 15
|
||||
#define R8A7793_CLK_FDP1_1 18
|
||||
#define R8A7793_CLK_FDP1_0 19
|
||||
#define R8A7793_CLK_TMU3 21
|
||||
#define R8A7793_CLK_TMU2 22
|
||||
#define R8A7793_CLK_CMT0 24
|
||||
#define R8A7793_CLK_TMU0 25
|
||||
#define R8A7793_CLK_VSP1_DU1 27
|
||||
#define R8A7793_CLK_VSP1_DU0 28
|
||||
#define R8A7793_CLK_VSP1_S 31
|
||||
|
||||
/* MSTP2 */
|
||||
#define R8A7793_CLK_SCIFA2 2
|
||||
#define R8A7793_CLK_SCIFA1 3
|
||||
#define R8A7793_CLK_SCIFA0 4
|
||||
#define R8A7793_CLK_MSIOF2 5
|
||||
#define R8A7793_CLK_SCIFB0 6
|
||||
#define R8A7793_CLK_SCIFB1 7
|
||||
#define R8A7793_CLK_MSIOF1 8
|
||||
#define R8A7793_CLK_SCIFB2 16
|
||||
#define R8A7793_CLK_SYS_DMAC1 18
|
||||
#define R8A7793_CLK_SYS_DMAC0 19
|
||||
|
||||
/* MSTP3 */
|
||||
#define R8A7793_CLK_TPU0 4
|
||||
#define R8A7793_CLK_SDHI2 11
|
||||
#define R8A7793_CLK_SDHI1 12
|
||||
#define R8A7793_CLK_SDHI0 14
|
||||
#define R8A7793_CLK_MMCIF0 15
|
||||
#define R8A7793_CLK_IIC0 18
|
||||
#define R8A7793_CLK_PCIEC 19
|
||||
#define R8A7793_CLK_IIC1 23
|
||||
#define R8A7793_CLK_SSUSB 28
|
||||
#define R8A7793_CLK_CMT1 29
|
||||
#define R8A7793_CLK_USBDMAC0 30
|
||||
#define R8A7793_CLK_USBDMAC1 31
|
||||
|
||||
/* MSTP4 */
|
||||
#define R8A7793_CLK_IRQC 7
|
||||
#define R8A7793_CLK_INTC_SYS 8
|
||||
|
||||
/* MSTP5 */
|
||||
#define R8A7793_CLK_AUDIO_DMAC1 1
|
||||
#define R8A7793_CLK_AUDIO_DMAC0 2
|
||||
#define R8A7793_CLK_ADSP_MOD 6
|
||||
#define R8A7793_CLK_THERMAL 22
|
||||
#define R8A7793_CLK_PWM 23
|
||||
|
||||
/* MSTP7 */
|
||||
#define R8A7793_CLK_EHCI 3
|
||||
#define R8A7793_CLK_HSUSB 4
|
||||
#define R8A7793_CLK_HSCIF2 13
|
||||
#define R8A7793_CLK_SCIF5 14
|
||||
#define R8A7793_CLK_SCIF4 15
|
||||
#define R8A7793_CLK_HSCIF1 16
|
||||
#define R8A7793_CLK_HSCIF0 17
|
||||
#define R8A7793_CLK_SCIF3 18
|
||||
#define R8A7793_CLK_SCIF2 19
|
||||
#define R8A7793_CLK_SCIF1 20
|
||||
#define R8A7793_CLK_SCIF0 21
|
||||
#define R8A7793_CLK_DU1 23
|
||||
#define R8A7793_CLK_DU0 24
|
||||
#define R8A7793_CLK_LVDS0 26
|
||||
|
||||
/* MSTP8 */
|
||||
#define R8A7793_CLK_IPMMU_SGX 0
|
||||
#define R8A7793_CLK_VIN2 9
|
||||
#define R8A7793_CLK_VIN1 10
|
||||
#define R8A7793_CLK_VIN0 11
|
||||
#define R8A7793_CLK_ETHER 13
|
||||
#define R8A7793_CLK_SATA1 14
|
||||
#define R8A7793_CLK_SATA0 15
|
||||
|
||||
/* MSTP9 */
|
||||
#define R8A7793_CLK_GPIO7 4
|
||||
#define R8A7793_CLK_GPIO6 5
|
||||
#define R8A7793_CLK_GPIO5 7
|
||||
#define R8A7793_CLK_GPIO4 8
|
||||
#define R8A7793_CLK_GPIO3 9
|
||||
#define R8A7793_CLK_GPIO2 10
|
||||
#define R8A7793_CLK_GPIO1 11
|
||||
#define R8A7793_CLK_GPIO0 12
|
||||
#define R8A7793_CLK_RCAN1 15
|
||||
#define R8A7793_CLK_RCAN0 16
|
||||
#define R8A7793_CLK_QSPI_MOD 17
|
||||
#define R8A7793_CLK_I2C5 25
|
||||
#define R8A7793_CLK_IICDVFS 26
|
||||
#define R8A7793_CLK_I2C4 27
|
||||
#define R8A7793_CLK_I2C3 28
|
||||
#define R8A7793_CLK_I2C2 29
|
||||
#define R8A7793_CLK_I2C1 30
|
||||
#define R8A7793_CLK_I2C0 31
|
||||
|
||||
/* MSTP10 */
|
||||
#define R8A7793_CLK_SSI_ALL 5
|
||||
#define R8A7793_CLK_SSI9 6
|
||||
#define R8A7793_CLK_SSI8 7
|
||||
#define R8A7793_CLK_SSI7 8
|
||||
#define R8A7793_CLK_SSI6 9
|
||||
#define R8A7793_CLK_SSI5 10
|
||||
#define R8A7793_CLK_SSI4 11
|
||||
#define R8A7793_CLK_SSI3 12
|
||||
#define R8A7793_CLK_SSI2 13
|
||||
#define R8A7793_CLK_SSI1 14
|
||||
#define R8A7793_CLK_SSI0 15
|
||||
#define R8A7793_CLK_SCU_ALL 17
|
||||
#define R8A7793_CLK_SCU_DVC1 18
|
||||
#define R8A7793_CLK_SCU_DVC0 19
|
||||
#define R8A7793_CLK_SCU_CTU1_MIX1 20
|
||||
#define R8A7793_CLK_SCU_CTU0_MIX0 21
|
||||
#define R8A7793_CLK_SCU_SRC9 22
|
||||
#define R8A7793_CLK_SCU_SRC8 23
|
||||
#define R8A7793_CLK_SCU_SRC7 24
|
||||
#define R8A7793_CLK_SCU_SRC6 25
|
||||
#define R8A7793_CLK_SCU_SRC5 26
|
||||
#define R8A7793_CLK_SCU_SRC4 27
|
||||
#define R8A7793_CLK_SCU_SRC3 28
|
||||
#define R8A7793_CLK_SCU_SRC2 29
|
||||
#define R8A7793_CLK_SCU_SRC1 30
|
||||
#define R8A7793_CLK_SCU_SRC0 31
|
||||
|
||||
/* MSTP11 */
|
||||
#define R8A7793_CLK_SCIFA3 6
|
||||
#define R8A7793_CLK_SCIFA4 7
|
||||
#define R8A7793_CLK_SCIFA5 8
|
||||
|
||||
#endif /* __DT_BINDINGS_CLOCK_R8A7793_H__ */
|
||||
48
include/dt-bindings/clock/r8a7793-cpg-mssr.h
Normal file
48
include/dt-bindings/clock/r8a7793-cpg-mssr.h
Normal file
@@ -0,0 +1,48 @@
|
||||
/*
|
||||
* Copyright (C) 2015 Renesas Electronics Corp.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*/
|
||||
|
||||
#ifndef __DT_BINDINGS_CLOCK_R8A7793_CPG_MSSR_H__
|
||||
#define __DT_BINDINGS_CLOCK_R8A7793_CPG_MSSR_H__
|
||||
|
||||
#include <dt-bindings/clock/renesas-cpg-mssr.h>
|
||||
|
||||
/* r8a7793 CPG Core Clocks */
|
||||
#define R8A7793_CLK_Z 0
|
||||
#define R8A7793_CLK_ZG 1
|
||||
#define R8A7793_CLK_ZTR 2
|
||||
#define R8A7793_CLK_ZTRD2 3
|
||||
#define R8A7793_CLK_ZT 4
|
||||
#define R8A7793_CLK_ZX 5
|
||||
#define R8A7793_CLK_ZS 6
|
||||
#define R8A7793_CLK_HP 7
|
||||
#define R8A7793_CLK_I 8
|
||||
#define R8A7793_CLK_B 9
|
||||
#define R8A7793_CLK_LB 10
|
||||
#define R8A7793_CLK_P 11
|
||||
#define R8A7793_CLK_CL 12
|
||||
#define R8A7793_CLK_M2 13
|
||||
#define R8A7793_CLK_ADSP 14
|
||||
#define R8A7793_CLK_ZB3 15
|
||||
#define R8A7793_CLK_ZB3D2 16
|
||||
#define R8A7793_CLK_DDR 17
|
||||
#define R8A7793_CLK_SDH 18
|
||||
#define R8A7793_CLK_SD0 19
|
||||
#define R8A7793_CLK_SD2 20
|
||||
#define R8A7793_CLK_SD3 21
|
||||
#define R8A7793_CLK_MMC0 22
|
||||
#define R8A7793_CLK_MP 23
|
||||
#define R8A7793_CLK_SSP 24
|
||||
#define R8A7793_CLK_SSPRS 25
|
||||
#define R8A7793_CLK_QSPI 26
|
||||
#define R8A7793_CLK_CP 27
|
||||
#define R8A7793_CLK_RCAN 28
|
||||
#define R8A7793_CLK_R 29
|
||||
#define R8A7793_CLK_OSC 30
|
||||
|
||||
#endif /* __DT_BINDINGS_CLOCK_R8A7793_CPG_MSSR_H__ */
|
||||
28
include/dt-bindings/power/r8a7793-sysc.h
Normal file
28
include/dt-bindings/power/r8a7793-sysc.h
Normal file
@@ -0,0 +1,28 @@
|
||||
/*
|
||||
* Copyright (C) 2016 Glider bvba
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*/
|
||||
#ifndef __DT_BINDINGS_POWER_R8A7793_SYSC_H__
|
||||
#define __DT_BINDINGS_POWER_R8A7793_SYSC_H__
|
||||
|
||||
/*
|
||||
* These power domain indices match the numbers of the interrupt bits
|
||||
* representing the power areas in the various Interrupt Registers
|
||||
* (e.g. SYSCISR, Interrupt Status Register)
|
||||
*
|
||||
* Note that R-Car M2-N is identical to R-Car M2-W w.r.t. power domains.
|
||||
*/
|
||||
|
||||
#define R8A7793_PD_CA15_CPU0 0
|
||||
#define R8A7793_PD_CA15_CPU1 1
|
||||
#define R8A7793_PD_CA15_SCU 12
|
||||
#define R8A7793_PD_SH_4A 16
|
||||
#define R8A7793_PD_SGX 20
|
||||
|
||||
/* Always-on power area */
|
||||
#define R8A7793_PD_ALWAYS_ON 32
|
||||
|
||||
#endif /* __DT_BINDINGS_POWER_R8A7793_SYSC_H__ */
|
||||
Reference in New Issue
Block a user