A RNG driver for Armada 3720 boards running the Turris Mox rWTM firmware
from CZ.NIC in the secure processor.
Signed-off-by: Max Resch <resch.max@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Add a config fragment with required differences for booting from spi
flash instead of sd-card (default).
Settings for environment location are based on vendor u-boot:
https://github.com/kobol-io/u-boot/blob/helios4/include/configs/helios4.h#L59
The fragment can be applied on top of helios4_defconfig by make:
make helios4_defconfig spiboot.config
Signed-off-by: Josua Mayer <josua@solid-run.com>
Update the helios4 defconfig to enable the 'setexpr' command, which is a
default and useful for various complex boot-scripts.
Signed-off-by: Josua Mayer <josua@solid-run.com>
SolidRun Armada-388 SoM has an i2c bus supporting on-som eeprom, and
peripherals on a carrier.
armada-38x.dtsi disables this bus by default, it should be enabled by
som or carrier dts.
Linux has moved i2c0 from helios-4 board dts to som dtsi, including
status, pinctrl and clock speed.
Copy these settings from mainline.
This fixes accessing i2c bus from u-boot commandline.
Signed-off-by: Josua Mayer <josua@solid-run.com>
The Turris Omnia contains the Marvell 88E6176 ethernet switch. Add
config options and device tree to enable the support.
Signed-off-by: Marek Mojík <marek.mojik@nic.cz>
Signed-off-by: Marek Behún <kabel@kernel.org>
The mv88e6xxx driver does not currently initialize the smi_addr field, but
instead keeps the default zero value. This leads to driver being unusable
on devices where the switch is not on address zero of the mdio bus. Fix
this problem by reading the SMI address from device tree.
Signed-off-by: Marek Mojík <marek.mojik@nic.cz>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Stefan Roese <sr@denx.de>
Current sunxi DRAM initialisation code does several test accesses to the
DRAM array to detect aliasing effects and so determine the correct
row/column configuration. This changes the DRAM content, which breaks
use cases like soft reset and Linux's ramoops mechanism.
Fix this problem by saving and restoring the content of the DRAM cells
that is used for the test writes.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
mctl_mem_matches and mctl_mem_matches_base identical functions. To
avoid code duplication move them to dram_helpers and make
mctl_mem_matches use generic mctl_mem_matches_base.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
No device tree in U-Boot or linux use the wrong spelling used in code.
Use correct property name as defined in dwc3 bindings.
Fixes: 062790f461 ("usb: xhci-dwc3: Add USB2 PHY configuration")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Marek Vasut <marex@denx.de>
Apurva Nandan <a-nandan@ti.com> says:
Hello Everyone!
This series will introduce basic support (SD and UART) support for Texas
Instruments J784S4 EVM.
The J784S4 SoC device tree patches are taken from kernel patch submissions
and will be updated as they are accepted and merged to the kernel tree.
All other patches are specific to SPL and u-boot and do not have
dependency on other trees. Appreciate a review for acceptance to u-boot
tree.
Here are some of the salient features of the J784S4 automotive grade
application processor:
The J784S4 SoC belongs to the K3 Multicore SoC architecture
platform, providing advanced system integration in automotive,
ADAS and industrial applications requiring AI at the network edge.
This SoC extends the K3 Jacinto 7 family of SoCs with focus on
raising performance and integration while providing interfaces,
memory architecture and compute performance for multi-sensor, high
concurrency applications.
Some highlights of this SoC are:
* Up to 8 Cortex-A72s, four clusters of lockstep capable dual Cortex-R5F MCUs,
4 C7x floating point vector DSPs with Matrix Multiply Accelerator(MMA) for
deep learning and CNN.
* 3D GPU: Automotive grade IMG BXS-4-64 MC1
* Vision Processing Accelerator (VPAC) with image signal processor and Depth
and Motion Processing Accelerator (DMPAC)
* Three CSI2.0 4L RX plus two CSI2.0 4L TX, two DSI Tx, one eDP/DP and one
DPI interface.
* Integrated gigabit ethernet switch, up to 8 ports (TDA4VH), two ports
support 10Gb USXGMII; Two 4 lane PCIe-GEN3 controllers, USB3.0 Dual-role
device subsystems, Up to 20 MCANs, among other peripherals.
See J784S4 Technical Reference Manual (SPRUJ52 - JUNE 2022)
for further details: http://www.ti.com/lit/zip/spruj52
In addtion, the J784S4 EVM board is designed for TI J784S4 SoC. It
supports the following interfaces:
* 32 GB DDR4 RAM
* x2 Gigabit Ethernet interfaces capable of working in Switch and MAC mode
* x1 Input Audio Jack, x1 Output Audio Jack
* x1 USB2.0 Hub with two Type A host and x1 USB 3.1 Type-C Port
* x2 4L PCIe connector
* x1 UHS-1 capable micro-SD card slot
* 512 Mbit OSPI flash, 1 Gbit Octal NAND flash, 512 Mbit QSPI flash,
UFS flash.
* x6 UART through UART-USB bridge
* XDS110 for onboard JTAG debug using USB
* Temperature sensors, user push buttons and LEDs
* 40-pin User Expansion Connector
* x2 ENET Expansion Connector, x1 GESI expander, x2 Display connector
* x1 15-pin CSI header
* x6 MCAN instances
Schematics: https://www.ti.com/lit/zip/sprr458
AM69 SD mode bootlog: https://gist.githubusercontent.com/apurvanandan1997/1b2c55d0204ff0f5a47ebbc196a97e99/raw/
J784S4 SD mode bootlog: https://gist.githubusercontent.com/apurvanandan1997/5e2ef85ee4322798d22b57a60dc917db/raw/
eMMC UDA moode bootlog: https://gist.githubusercontent.com/apurvanandan1997/3cffada252d50a8aa0c00a91f1f2f856/raw/
ring_idx was not correctly assigned in case of tflow_id is zero.
Which leads to wrong pairing of DMA for drivers like OSPI.
Fixes: 4312a1dfca ("dma: ti: k3-udma: Use ring_idx to pair k3 nav rings")
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
TI K3 J784S4 and AM69 are new additions to the K3 SoC family.
Add documentation about the J784S4 EVM and AM69 SK.
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # AM69-SK
With the latest TIFS firmware, an additional virtual interrupt and
event is reserved for TIFS usage on am62x and am62ax devices.
Update the rm-cfg to reflect this new reservation.
Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
In udma_probe() the return value of setup_resources() is stored in the
u32 "ch_count" member of "struct udma_dev", due to which any negative
return value which indicates an error is masked.
Fix this by storing the return value of setup_resources() in the already
declared integer variable "ret", followed by assigning it to the "ch_count"
member of "struct udma_dev" in case of no error.
While at it, change the "return ret" at the end of udma_probe() to a
"return 0", to explicitly indicate that probe was successful.
Fixes: a8837cf438 ("dma: ti: k3-udma: Query DMA channels allocated from Resource Manager")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
With the default size the stack grows into the malloc, pool leading to
stack corruption and boot failure.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Read the max temperature for the SoC temperature grade from the hardware
and change the critical trip nodes on each thermal zone of FDT at
runtime so they are correct with the hardware value for its grade.
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
AM62x SoC is available in multiple temperature grade:
- Commercial: 0° to 95° C
- Industrial: -40° to 105° C
- Automotive: -40° to 125° C
Add a new function that returns the am62 max temperature value
accordingly to its temperature grade in Celsius.
Signed-off-by: Joao Paulo Goncalves <joao.goncalves@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Like we did with R5, move ARM64 code into a specific directory to make
it clear what code is only meant to run on each core type.
Signed-off-by: Andrew Davis <afd@ti.com>
The disable_linefill_optimization() function is only ever loaded by the
R5 core, move the code into the R5 directory.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Loading ATF is only supported from the R5, move the Kconfig symbol
definition to match.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Introduce the base dts files needed for u-boot or to augment the linux
dtbs for use in the u-boot-spl and u-boot binaries.
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # AM69-SK
Introduce the base dts files needed for u-boot or to augment the linux
dtbs for use in the u-boot-spl and u-boot binaries.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
[ add binman and ddr dtsi files ]
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # AM69-SK
Add board files for J784S4 EVM.
SYS_DISABLE_DCACHE_OPS is selected in the Kconfig because
J784S4/AM69 are a coherent architecture at A72 level by
MSMC support.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # AM69-SK
Add J784S4 initialization files for initial SPL boot.
config SYS_K3_MCU_SCRATCHPAD_BASE default value is same
for J721E, J721S2, J784S4. So combined them into a single
default.
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
[ add firewall configurations and change the R5 MCU scratchpad ]
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Dasnavis Sabiya <sabiya.d@ti.com>
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> # AM69-SK
Nishanth Menon <nm@ti.com> says:
Hi,
Rev 2 of the series.
This is a follow up from [1] - Without the 32k crystal configuration,
wlan doesn't work. Debounce is needed for HDMI Hot plug detect(hpd)
gpio interrupt not storming.
At least the 32k configuration has been done for toradex and phytec
boards, follow similar model of programming.
Series is now based off master branch.
Bootlog: https://gist.github.com/nmenon/75df38bee907785d1d78d1ec4abd7304
Changes from V2:
- Removed depedency on [2] - depending on which way
the merge sequence goes, one of the series will need a rebase.
- Added a patch for a bug that Jan noticed
- Fixup for the fat finger missing 0x in 0x4080 :(
[1] https://lore.kernel.org/u-boot/20230725185253.2123433-4-nm@ti.com/
[2] https://lore.kernel.org/u-boot/20240212194726.1093771-1-nm@ti.com/
We had enabled USB and network pxe boot with the hope to get it all
merged on time. However, it has not panned out. Drop usb and pxe boot
else bootflow scan -l throws in:
a) Unknown uclass 'usb' in label
b) Crashes when attempting pxe - cpsw/mdio driver apparently has missing
error handling of what ever form. This is the one that Jan noticed in
his log.
We can enable these on a later date once things are working.
Cc: Roger Quadros <rogerq@kernel.org>
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Closes: https://lore.kernel.org/all/782ea2c0-eef5-478d-a122-cc6e2d066762@siemens.com/
Signed-off-by: Nishanth Menon <nm@ti.com>
Add the Debounce configuration registers that need to be configured one
time for the platform for the entire SoC.
Signed-off-by: Nishanth Menon <nm@ti.com>
Enable the external 32k crystal similar to that found on other
production AM62X board. The trim settings for the crystal is board
dependent, so the sequences tend to be board specific. Since this is
a configuration that needs to be done prior to DM managing the system
and all other muxes get set, do the same from R5 context.
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
- Assorted MediaTek, ASPEED, xenguest, s5p4418 and qemu-arm fixes
- Assorted test fixes/updates/additions.
- A few bootstd/related fixes.
- Remove common.h from some files
- Drop reiserfs
- A few other assorted fixes throughout the tree.
Add myself as maintainer for SynQuacer Developerbox,
as I'm currently working on it.
This commit also removes Jassi from maintainer since he
no longer has a Developerbox.
Cc: Jassi Brar <jassisinghbrar@gmail.com>
Signed-off-by: Masahisa Kojima <kojima.masahisa@socionext.com>
Acked-by: Jassi Brar <jaswinder.singh@linaro.org>
We should have CONFIG_DM_I2C or CONFIG_SYS_I2C_LEGACY enabled in
order for `cmd/eeprom.c` to compile as it depends on the i2c functions
which are not compiled otherwise. Update the Kconfig entry for the
'eeprom' command correspondingly.
Signed-off-by: Ivan Orlov <ivan.orlov@codethink.co.uk>
Reviewed-by: Tom Rini <trini@konsulko.com>
Without the '-undef' option, the 'linux' string in .env files is
replaced with the string '1 '.
For example, in the board/armadeus/opos6uldev/opos6uldev.env file,
kernelimg=opos6ul-linux.bin
becomes
kernelimg=opos6ul-1 .bin
in the include/generated/env.in file.
That's because 'linux' is a System-specific Predefined Macros. [1]
Pass the '-undef' option to fix this issue.
[1] https://gcc.gnu.org/onlinedocs/gcc-13.2.0/cpp/System-specific-Predefined-Macros.html
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The "bootflow" command currently doesn't support scanning a single
partition. This is inconvenient in setups with multiple bootable
partitions within a single disk, but only one is desired.
Support scanning a single disk partition. Specifically, support the
syntax:
bootflow scan mmc1:4
which scans only mmc device 1, partition 4.
Signed-off-by: Nam Cao <namcao@linutronix.de>
This code assumes that CONFIG_MMC and it causes a build error when
the config is disabled.
aarch64-linux-gnu-ld.bfd: test/boot/bootstd_common.o: in function `bootstd_test_check_mmc_hunter':
test/boot/bootstd_common.c:83:(.text.bootstd_test_check_mmc_hunter+0x70):
undefined reference to `_u_boot_list_2_bootdev_hunter_2_mmc_bootdev_hunter'
Fixes: 66e3dce787 ("bootstd: Allow hunting for a bootdev by label")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
