Add PSIL data for the AM62P and the J722S SoC family. The PSIL mapping
for the J722S is the same except for the extra instances of the CSI-RX.
So let's reuse the same file for both the AM62P and J722S.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
[bb@ti.com: rebased to U-Boot v2024.01]
Signed-off-by: Bryan Brattlof <bb@ti.com>
Introduce the basic files needed to support the am62px family of SoCs
Co-developed-by: Hari Nagalla <hnagalla@ti.com>
Signed-off-by: Hari Nagalla <hnagalla@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Currently, for the K3 generation of SoCs, there are more SoCs that
utilize the split firmware approach than the combined DMSC firmware.
Invert the logic to avoid adding more and more SoCs to this list.
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
The am62px family of SoCs uses the same DDR controller as found on the
am62ax family. Enable this option when building for the am62px family
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Include the clock and lpsc tree files needed for the wkup spl to
initialize the proper PLLs and power domains to boot the SoC.
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Cleanup this list and standardize on using the IS_ENABLED macro for the
power domain data list.
Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Include the part number for TI's am62px family of SoCs so we can
properly identify it during boot
Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Add default configuration for nand-flash to boot the linux kernel.
Add default configuration for qspi-flash to boot the linux kernel.
Add default configuration for sd-card to boot the linux kernel.
Configs are synced with savedefconfig.
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
This migrates the plaintext README in
board/theobroma-systems/ringneck_px30 to doc/board/theobroma-systems and
while doing so, update the instructions and rewrite it in rST.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
This migrates the plaintext README in
board/theobroma-systems/puma_rk3399 to doc/board/theobroma-systems and
while doing so, update the instructions and rewrite it in rST.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Since commit 9e644284ab ("dm: core: Report bootph-pre-ram/sram node as
pre-reloc after relocation"), bootph-pre-ram doesn't make U-Boot proper
bind the device before relocation.
While this is usually not much of an issue, it is when there's a lookup
for devices by code running before the relocation. Such is the case of
env_init() which calls env_driver_lookup() which calls
env_get_location() which is a weak symbol and may call
arch_env_get_location() also a weak symbol. Those are two functions that
may traverse UCLASS to find some devices (e.g.
board/theobroma-systems/common/common.c:arch_env_get_location()).
This allows something in the env_init() call stack to be able to use
uclasses for SD and eMMC controller on RK3588S/RK3588. This aligns the
behavior with what seems to be all SoCs except RK356x family.
Additionally, if any other env function (e.g. env_load) were to be used
before relocation, this is also required as otherwise it wouldn't be
able to find the MMC device(s).
Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
The different macros use writel which is defined in asm/io.h, so let's
include the header so users of hardware.h do not need to include
asm/io.h as well.
While at it, remove asm/io.h includes wherever
asm/arch-rockchip/hardware.h is included already.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
hardware.h is only defining macros which are "wrappers" around writel().
writel() is however not available in hardware.h, <asm/io.h> needs to be
included. This means in order to use the wrappers in hardware.h, one
also needs to include the <asm/io.h> header.
However, this cannot be done currently because hardware.h is included in
include/configs files, which are implicitly included by every code file
by default, which makes the compilation of arch/arm/cpu/armv8/u-boot.lds
fail because ALIGN (the ARM assembly directive) got redefined by some
of the include files coming from <asm.io.h>.
Because nothing in the include/configs file actually use hardware.h,
let's remove the inclusion of hardware.h from the include/configs files
and explicitly add it wherever it is required.
This prepares for the next commit where <asm/io.h> will be included in
hardware.h.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
It's one thing to have the register mapped via a well-defined struct but
it's another to be able to make use of it. For that to happen, one needs
to cast the physical address memory of the beginning of the register
address space with the struct. Since this cannot change, let's hardcode
it in the include files so that users do not need to duplicate this line
of code in their own implementation.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Rockchip SoCs can automatically switch between jtag and sdmmc based on
the following rules:
- all the SDMMC pins including SDMMC_DET set as SDMMC function in GRF,
- force_jtag bit in GRF is 1,
- SDMMC_DET is low (no card detected),
Note that the BootROM may mux all SDMMC pins in their SDMMC function or
not, depending on the boot medium that were tried.
Because SDMMC_DET pin is not guaranteed to be used as an SD card card
detect pin, it could be low at boot or even switch at runtime, which
would enable the jtag function and render the SD card unusable.
This is the case for RK3588 Jaguar for example which has an SD card
connector without an SD card card detect signal and has SDMMC_DET
connected to ground.
Because enabling JTAG at runtime could be a security issue and also to
make sure that we have a consistent behavior on all boards by default,
let's disable this force_jtag feature.
However, let's make it easy to reenable it for debugging purposes by
hiding it behind a Kconfig symbol.
Note that soc_con[0] is reserved. But considering that it's way more
user-friendly to access soc_con1 from the TRM with soc_con[1] than
soc_con[0], and that soc_con0 would actually be located at 4 bytes
before soc_con1, let's just make soc_con0 part of the soc_con array.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The functions aren't used anywhere else than in board.c, therefore,
let's not expose them anymore at all.
This merges misc.c and board.c together and removes the functions from
the misc.h header file.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Only setup_boottargets differs from the original misc_init_r from
Rockchip mach code, so let's use rockchip_early_misc_init_r instead of
reimplementing the whole misc_init_r from Rockchip.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Only setup_iodomain() and setup_boottargets differ from the original
misc_init_r from Rockchip mach code, so let's use
rockchip_early_misc_init_r instead of reimplementing the whole
misc_init_r from Rockchip.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Compared to the original misc_init_r from Rockchip mach code,
setup_iodomain() is added and rockchip_setup_macaddr() is not called.
It is assumed adding rockchip_setup_macaddr() back is fine.
Let's use rockchip_early_misc_init_r instead of reimplementing the whole
misc_init_r from Rockchip (the side effect being that
rockchip_setup_macaddr() is back).
Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Compared to the original misc_init_r from Rockchip mach code,
setup_iodomain() is added and rockchip_setup_macaddr() is not called.
It is assumed adding rockchip_setup_macaddr() back is fine.
Let's use rockchip_early_misc_init_r instead of reimplementing the whole
misc_init_r from Rockchip (the side effect being that
rockchip_setup_macaddr() is back).
Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Only setup_iodomain() differs from the original misc_init_r from
Rockchip mach code, so let's use rockchip_early_misc_init_r instead of
reimplementing the whole misc_init_r from Rockchip.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Most Rockchip boards who override misc_init_r do it only to call another
function and keep the rest unchanged. Therefore to allow for less
duplication, let's just add a weak function symbol that is called inside
misc_init_r.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
The expected length of the cpuid, as passed with cpuid_length,
determines the size of cpuid_str string. Therefore, care should be taken
to make sure nothing is accessing data out-of-bounds.
Instead of using hardcoded values, derive them from cpuid_length.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
When copying the build system for Linux we missed to replace some
instances of 'Documentation' by 'doc'.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Python 3.6 introduced a DeprecationWarning for invalid escape sequences.
This is upgraded to a SyntaxWarning in Python 3.12, and will eventually
be a syntax error.
Fix these now to get ahead of it before it's an error.
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Message-ID: <20230912060801.95533-3-bgray@linux.ibm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Adapted for U-Boot
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Use proper binary artifact names for HSFS devices.
Do not use the *_unsigned binaries.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
When using the previous prototype you got a compiler warning like this:
warning: initialization of 'int (*)(struct cmd_tbl *, int, int, char * const*)' from incompatible pointer type 'int (*)(struct cmd_tbl *, int, int, const char **)' [-Wincompatible-pointer-types]
Fixes: 3d9640f55c ("doc: expand README.commands")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Moving the efi_carve_out_dt_rsv() call in commit 1be415b21b
("efi_loader: create memory reservations in ACPI case")
broke boards that create additional memory reservations in
ft_board_setup() since it is now called before those additional
memory reservations are made. This is the case for the rk3588
boards and breaks booting OpenBSD on those boards.
Move the call back to its original location and add a call in
the code path used for ACPI.
Fixes: 1be415b21b ("efi_loader: create memory reservations in ACPI case")
Signed-off-by: Mark Kettenis <kettenis@openbsd.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The 'PolarFire Hart Software Services' SBI implementation returns the
version of the incorporated OpenSBI. Format the number accordingly.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
