meta-sunxi/README.md
2023-04-04 08:42:23 +02:00

88 lines
3.4 KiB
Markdown

meta-sunxi
==============
Official sunxi OpenEmbedded layer for Allwinner-based boards.
This layer depends on the additional layers:
* [meta-openembedded/meta-oe](http://git.openembedded.org/meta-openembedded/tree/meta-oe)
Tested with core-image-base.
Maintainers:
* Nicolas Aguirre <aguirre.nicolas@gmail.com>
* Enrico Butera <ebutera@users.sourceforge.net>
* Sergey Lapin <slapin@ossfans.org>
* Marek Belisko <marek.belisko@gmail.com>
Community
===========
You can reach community + ask your question on gitter: https://matrix.to/#/#meta-sunxi:gitter.im
Kernel / U-Boot Version
===========
Most Allwinner devices and hardware are supported in mainline kernel and U-Boot, so this layer builds mainline by default.
Legacy sunxi Kernel / U-Boot
-----------
There is a custom U-Boot and Kernel version for sunxi devices which includes some special drivers not mainlined.
These versions are rather old (3.4 for kernel and 2014.04 for U-Boot), but may support more functions and devices than current mainline.
If you want to switch back to sunxi versions for some reasons (no device tree available, unsupported hardware), either:
- change the file conf/machine/include/sunxi.inc to include the following block
- edit your conf/local.conf to add the following block
PREFERRED_PROVIDER_u-boot="u-boot-sunxi"
PREFERRED_PROVIDER_virtual/bootloader="u-boot-sunxi"
PREFERRED_PROVIDER_virtual/kernel="linux-sunxi"
KERNEL_DEVICETREE = ""
If you already have built the mainline versions it might be necessary to reset the build directories with:
bitbake -c clean virtual/kernel virtual/bootloader
Mainline Kernel / U-Boot
-----------
For mainline kernel we have now support for latest LTS and stable.
By default we use latest LTS. If you would like to change version please update ```PREFERRED_VERSION_linux-mainline``` in:
* [conf/machine/include/sunxi.inc](https://github.com/linux-sunxi/meta-sunxi/blob/fa0846c0eb23e3424b89acb4d5a327e921f73497/conf/machine/include/sunxi.inc#L16)
When using mainline kernel ≥ 5.2 it is now possible to use the mainline graphics drivers *lima* and *panfrost*, instead of the *mali* driver provided by ARM. To enable open source mainline graphics support add the following line in your `local.conf`:
MACHINEOVERRIDES .= ":use-mailine-graphics"
Performance
===========
The default machine settings are meant to be the lowest common denominator, maximizing generality.
Significantly better performance (2x-3x) can be achieved with the following settings:
**_Allwinner A20_**
For Allwinner A20 (Cubieboard2/CubieTruck), the following tuning options are recommended:
_Enable hardfloat, thumb2 and neon capabilities_
DEFAULTTUNE = "cortexa7hf-neon-vfpv4"
This tuning profile takes advantage of the Allwinner A20 hardfloat, neon and vfpv4 capabilities.
_Change CPU governor to ondemand, and tune settings_
echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
echo 336000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
echo 912000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
#More aggressive
#echo 1008000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
echo 40 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
echo 200000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate
This code changes the default CPU governor from _fantasy_ to _ondemand_, and tunes its settings, as recommended at http://linux-sunxi.org/Cpufreq
For additional discussion, see https://github.com/linux-sunxi/meta-sunxi/issues/25