Fix booting for orange-pi-one-plus machine

Use proper config for ATF.

Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>

README.md

@@ -6,6 +6,7 @@ Official sunxi OpenEmbedded layer for Allwinner-based boards.
 This layer depends on the additional layers:
 
 * [meta-openembedded/meta-oe](http://git.openembedded.org/meta-openembedded/tree/meta-oe)
+* [meta-arm](https://git.yoctoproject.org/meta-arm)
 
 Tested with core-image-base.
 
@@ -16,27 +17,44 @@ Maintainers:
 * Sergey Lapin <slapin@ossfans.org>
 * Marek Belisko <marek.belisko@gmail.com>
 
+Community
+===========
+
+You can reach community + ask your question on gitter: https://matrix.to/#/#meta-sunxi:gitter.im
+
 Kernel / U-Boot Version
 ===========
 Most Allwinner devices and hardware are supported in mainline kernel and U-Boot, so this layer builds mainline by default.
+
+Legacy sunxi Kernel / U-Boot
+-----------
+
 There is a custom U-Boot and Kernel version for sunxi devices which includes some special drivers not mainlined.
-These versions are rather old (3.4 for kernel and 2014.04 for U-Boot), but may support more functions and devices than current mainline
+These versions are rather old (3.4 for kernel and 2014.04 for U-Boot), but may support more functions and devices than current mainline.
 
 If you want to switch back to sunxi versions for some reasons (no device tree available, unsupported hardware), either:
 - change the file conf/machine/include/sunxi.inc to include the following block
 - edit your conf/local.conf to add the following block
 
-	PREFERRED_PROVIDER_u-boot="u-boot-sunxi"
-	PREFERRED_PROVIDER_virtual/bootloader="u-boot-sunxi"
-	PREFERRED_PROVIDER_virtual/kernel="linux-sunxi"
+		PREFERRED_PROVIDER_u-boot="u-boot-sunxi"
+		PREFERRED_PROVIDER_virtual/bootloader="u-boot-sunxi"
+		PREFERRED_PROVIDER_virtual/kernel="linux-sunxi"
+		KERNEL_DEVICETREE = ""
 
 If you already have built the mainline versions it might be necessary to reset the build directories with:
 
 	bitbake -c clean virtual/kernel virtual/bootloader
 
-For mainline kernel we have now support for latest LTS, stable and bleeding edge (latest possible rc).
+Mainline Kernel / U-Boot
+-----------
+
+For mainline kernel we have now support for latest LTS and stable.
 By default we use latest LTS. If you would like to change version please update ```PREFERRED_VERSION_linux-mainline``` in:
-* [conf/machine/include/sunxi.inc](https://github.com/linux-sunxi/meta-sunxi/blob/4921234ed77f9df77c65c88637ce50468f65bde7/conf/machine/include/sunxi.inc#L16)
+* [conf/machine/include/sunxi.inc](https://github.com/linux-sunxi/meta-sunxi/blob/fa0846c0eb23e3424b89acb4d5a327e921f73497/conf/machine/include/sunxi.inc#L16)
+
+When using mainline kernel ≥ 5.2 it is now possible to use the mainline graphics drivers *lima* and *panfrost*, instead of the *mali* driver provided by ARM. To enable open source mainline graphics support add the following line in your `local.conf`:
+
+    MACHINEOVERRIDES .= ":use-mailine-graphics"
 
 Performance
 ===========

classes/sdcard_image-sunxi.bbclass

@@ -1,124 +0,0 @@
-inherit image_types
-
-#
-# Create an image that can by written onto a SD card using dd.
-# Originally written for rasberrypi adapt for the needs of allwinner sunxi based boards
-#
-# The disk layout used is:
-#
-#    0                      -> 8*1024                           - reserverd
-#    8*1024                 ->                                  - arm combined spl/u-boot or aarch64 spl
-#    40*1024                ->                                  - aarch64 u-boot
-#    2048*1024              -> BOOT_SPACE                       - bootloader and kernel
-#
-#
-
-# This image depends on the rootfs image
-IMAGE_TYPEDEP_sunxi-sdimg = "${SDIMG_ROOTFS_TYPE}"
-
-# Boot partition volume id
-BOOTDD_VOLUME_ID ?= "${MACHINE}"
-
-# Boot partition size [in KiB]
-BOOT_SPACE ?= "40960"
-
-# First partition begin at sector 2048 : 2048*1024 = 2097152
-IMAGE_ROOTFS_ALIGNMENT = "2048"
-
-# Use an uncompressed ext4 by default as rootfs
-SDIMG_ROOTFS_TYPE ?= "ext4"
-SDIMG_ROOTFS = "${IMGDEPLOYDIR}/${IMAGE_NAME}.rootfs.${SDIMG_ROOTFS_TYPE}"
-
-do_image_sunxi_sdimg[depends] += " \
-			parted-native:do_populate_sysroot \
-			mtools-native:do_populate_sysroot \
-			dosfstools-native:do_populate_sysroot \
-			virtual/kernel:do_deploy \
-			virtual/bootloader:do_deploy \
-			"
-
-# SD card image name
-SDIMG = "${IMGDEPLOYDIR}/${IMAGE_NAME}.rootfs.sunxi-sdimg"
-
-IMAGE_CMD_sunxi-sdimg () {
-
-	# Align partitions
-	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
-	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT})
-	SDIMG_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $ROOTFS_SIZE + ${IMAGE_ROOTFS_ALIGNMENT})
-
-	# Initialize sdcard image file
-	dd if=/dev/zero of=${SDIMG} bs=1 count=0 seek=$(expr 1024 \* ${SDIMG_SIZE})
-
-	# Create partition table
-	parted -s ${SDIMG} mklabel msdos
-	# Create boot partition and mark it as bootable
-	parted -s ${SDIMG} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT})
-	parted -s ${SDIMG} set 1 boot on
-	# Create rootfs partition
-	parted -s ${SDIMG} unit KiB mkpart primary ext2 $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT}) $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT} \+ ${ROOTFS_SIZE})
-	parted ${SDIMG} print
-
-	# Create a vfat image with boot files
-	BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }')
-	rm -f ${WORKDIR}/boot.img
-	mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
-
-	mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::${KERNEL_IMAGETYPE}
-
-	# Copy device tree file
-	if test -n "${KERNEL_DEVICETREE}"; then
-		for DTS_FILE in ${KERNEL_DEVICETREE}; do
-			DTS_BASE_NAME=`basename ${DTS_FILE} | awk -F "." '{print $1}'`
-			DTS_DIR_NAME=`dirname ${DTS_FILE}`
-			if [ -e ${DEPLOY_DIR_IMAGE}/"${DTS_BASE_NAME}.dtb" ]; then
-
-				if [ ${DTS_FILE} != ${DTS_BASE_NAME}.dtb ]; then
-					mmd -i ${WORKDIR}/boot.img ::/${DTS_DIR_NAME}
-				fi
-
-				kernel_bin="`readlink ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin`"
-				kernel_bin_for_dtb="`readlink ${DEPLOY_DIR_IMAGE}/${DTS_BASE_NAME}.dtb | sed "s,$DTS_BASE_NAME,${KERNEL_IMAGETYPE},g;s,\.dtb$,.bin,g"`"
-				if [ $kernel_bin = $kernel_bin_for_dtb ]; then
-					mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${DTS_BASE_NAME}.dtb ::/${DTS_FILE}
-				fi
-			fi
-		done
-	fi
-
-	if [ -e "${DEPLOY_DIR_IMAGE}/fex.bin" ]
-	then
-		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/fex.bin ::script.bin
-	fi
-	if [ -e "${DEPLOY_DIR_IMAGE}/boot.scr" ]
-	then
-		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/boot.scr ::boot.scr
-	fi
-
-
-	# Add stamp file
-	echo "${IMAGE_NAME}" > ${WORKDIR}/image-version-info
-	mcopy -i ${WORKDIR}/boot.img -v ${WORKDIR}/image-version-info ::
-
-	# Burn Partitions
-	dd if=${WORKDIR}/boot.img of=${SDIMG} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
-	# If SDIMG_ROOTFS_TYPE is a .xz file use xzcat
-	if echo "${SDIMG_ROOTFS_TYPE}" | egrep -q "*\.xz"
-	then
-		xzcat ${SDIMG_ROOTFS} | dd of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
-	else
-		dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
-	fi
-
-	# write u-boot-spl at the begining of sdcard in one shot
-	SPL_FILE=$(basename ${SPL_BINARY})
-	dd if=${DEPLOY_DIR_IMAGE}/${SPL_FILE} of=${SDIMG} bs=1024 seek=8 conv=notrunc
-}
-
-# write uboot.itb for arm64 boards
-IMAGE_CMD_sunxi-sdimg_append_sun50i () {
-	if [ -e "${DEPLOY_DIR_IMAGE}/${UBOOT_BINARY}" ]
-	then
-		dd if=${DEPLOY_DIR_IMAGE}/${UBOOT_BINARY} of=${SDIMG} bs=1024 seek=40 conv=notrunc
-	fi
-}

conf/layer.conf

@@ -4,14 +4,14 @@ BBPATH .= ":${LAYERDIR}"
 # We have a recipes directory, add to BBFILES
 BBFILES += "${LAYERDIR}/recipes*/*/*.bb ${LAYERDIR}/recipes*/*/*.bbappend"
 
-BBFILE_COLLECTIONS += "meta-sunxi"
-BBFILE_PATTERN_meta-sunxi := "^${LAYERDIR}/"
-BBFILE_PRIORITY_meta-sunxi = "10"
+BBFILE_COLLECTIONS += "sunxi"
+BBFILE_PATTERN_sunxi := "^${LAYERDIR}/"
+BBFILE_PRIORITY_sunxi = "10"
 
 # This should only be incremented on significant changes that will
 # cause compatibility issues with other layers
-LAYERVERSION_meta-sunxi = "1"
+LAYERVERSION_sunxi = "1"
 
-LAYERDEPENDS_meta-sunxi = "core openembedded-layer"
+LAYERDEPENDS_sunxi = "core meta-python meta-arm"
 
-LAYERSERIES_COMPAT_meta-sunxi = "zeus"
+LAYERSERIES_COMPAT_sunxi = "honister kirkstone langdale mickledore"

conf/machine/bananapi-m2-zero.conf

@@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: bananapi-m2-zero
+#@DESCRIPTION: Machine configuration for the Banana Pi M2 Zero, base on Allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+require conf/machine/include/hardware/ap6212a.inc
+
+KERNEL_DEVICETREE = "sun8i-h2-plus-bananapi-m2-zero.dtb"
+UBOOT_MACHINE = "bananapi_m2_zero_defconfig"
+

conf/machine/bananapi-m2m.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: bananapi-m2m
+#@DESCRIPTION: Machine configuration for the Banana Pi M2M, base on Allwinner H8 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-r16-bananapi-m2m.dtb"
+UBOOT_MACHINE = "Bananapi_m2m_defconfig"
+

conf/machine/bananapi-m2plus.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: bananapi-m2plus
+#@DESCRIPTION: Machine configuration for the Banana Pi M2+, base on Allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-bananapi-m2-plus.dtb"
+UBOOT_MACHINE = "bananapi_m2_plus_h3_defconfig"
+

conf/machine/bananapi-m64.conf

@@ -0,0 +1,8 @@
+#@TYPE: Machine
+#@NAME: pine64-plus
+#@DESCRIPTION: Machine configuration for the pine64-plus, based on Allwinner A64 CPU
+
+require conf/machine/include/sun50i.inc
+
+KERNEL_DEVICETREE = "allwinner/sun50i-a64-bananapi-m64.dtb"
+UBOOT_MACHINE = "bananapi_m64_defconfig"

conf/machine/include/hardware/ap6212a.inc

@@ -0,0 +1,5 @@
+# Include for boards with AMPAK 6212A Wifi / Bluetooth module
+# https://linux-sunxi.org/Wifi#Ampak
+
+MACHINE_EXTRA_RRECOMMENDS:append = " kernel-module-brcmfmac"
+MACHINE_EXTRA_RDEPENDS:append = " linux-firmware-bcm43430"

conf/machine/include/sun4i.inc

@@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/tune-cortexa8.inc
+require conf/machine/include/arm/armv7a/tune-cortexa8.inc
 
 SOC_FAMILY = "sun4i"

conf/machine/include/sun50i-h6.inc

@@ -0,0 +1,8 @@
+require conf/machine/include/sunxi64.inc
+
+DEFAULTTUNE ?= "cortexa53-crypto"
+require conf/machine/include/arm/armv8a/tune-cortexa53.inc
+
+MACHINEOVERRIDES =. "sun50i:"
+
+SOC_FAMILY = "sun50i-h6"

conf/machine/include/sun50i-h616.inc

@@ -0,0 +1,8 @@
+require conf/machine/include/sunxi64.inc
+
+DEFAULTTUNE ?= "cortexa53-crypto"
+require conf/machine/include/arm/armv8a/tune-cortexa53.inc
+
+MACHINEOVERRIDES =. "sun50i:"
+
+SOC_FAMILY = "sun50i-h616"

conf/machine/include/sun50i.inc

@@ -1,6 +1,6 @@
 require conf/machine/include/sunxi64.inc
 
 DEFAULTTUNE ?= "cortexa53-crypto"
-require conf/machine/include/tune-cortexa53.inc
+require conf/machine/include/arm/armv8a/tune-cortexa53.inc
 
 SOC_FAMILY = "sun50i"

conf/machine/include/sun5i.inc

@@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/tune-cortexa8.inc
+require conf/machine/include/arm/armv7a/tune-cortexa8.inc
 
 SOC_FAMILY = "sun5i"

conf/machine/include/sun7i.inc

@@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/tune-cortexa7.inc
+require conf/machine/include/arm/armv7a/tune-cortexa7.inc
 
 SOC_FAMILY = "sun7i"

conf/machine/include/sun8i.inc

@@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/tune-cortexa7.inc
+require conf/machine/include/arm/armv7a/tune-cortexa7.inc
 
 SOC_FAMILY = "sun8i"

conf/machine/include/sunxi-mali-driver.inc

@@ -0,0 +1,15 @@
+PREFERRED_PROVIDER_virtual/mesa ?= "mesa-gl"
+PREFERRED_PROVIDER_virtual/libgl ?= "mesa-gl"
+PREFERRED_PROVIDER_virtual/libgles1 ?= "sunxi-mali"
+PREFERRED_PROVIDER_virtual/libgles2 ?= "sunxi-mali"
+PREFERRED_PROVIDER_virtual/egl ?= "sunxi-mali"
+
+PACKAGECONFIG:remove:pn-xserver-xorg = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'glamor', '', d)}"
+
+XSERVER += "sunxi-mali \
+            sunxi-mali-dev"
+
+MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "\
+ kernel-module-mali \
+ kernel-module-mali-drm \
+  "

conf/machine/include/sunxi-mali.inc

@@ -1,15 +1,5 @@
-PREFERRED_PROVIDER_virtual/mesa ?= "mesa-gl"
-PREFERRED_PROVIDER_virtual/libgl ?= "mesa-gl"
-PREFERRED_PROVIDER_virtual/libgles1 ?= "sunxi-mali"
-PREFERRED_PROVIDER_virtual/libgles2 ?= "sunxi-mali"
-PREFERRED_PROVIDER_virtual/egl ?= "sunxi-mali"
-
-PACKAGECONFIG_remove_pn-xserver-xorg = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'glamor', '', d)}"
-
-XSERVER += "sunxi-mali \
-            sunxi-mali-dev"
-
-MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "\
- kernel-module-mali \
- kernel-module-mali-drm \
-  "
+# The "sunxi-mailine-graphics-drivers.inc" doesn't exist, but it can be created
+# in the future if needed.  Using include directive ensures build doesn't fail
+# if .inc file doesn't exist:
+# https://www.yoctoproject.org/pipermail/yocto/2019-August/046484.html
+include ${@'sunxi-mali-driver.inc' if 'use-mailine-graphics' not in d.getVar("MACHINEOVERRIDES").split(":") else 'sunxi-mailine-graphics-drivers.inc' }

conf/machine/include/sunxi.inc

@@ -1,26 +1,26 @@
 SOC_FAMILY ??= ""
 include conf/machine/include/soc-family.inc
 
+MACHINEOVERRIDES =. "sunxi:"
+
 # Sub-architecture support
 MACHINE_SOCARCH_SUFFIX ?= ""
 MACHINE_SOCARCH_SUFFIX_sun4i = "-sun4i"
 
 PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
 XSERVER = "xserver-xorg \
-           xf86-video-fbturbo \
            xf86-input-evdev \
            xf86-input-mouse \
            xf86-input-keyboard"
 
 PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
-PREFERRED_VERSION_linux-mainline ?= "4.19%"
+PREFERRED_VERSION_linux-mainline ?= "6.1.%"
 PREFERRED_PROVIDER_u-boot ?= "u-boot"
 PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
 
 KERNEL_IMAGETYPE ?= "uImage"
 
-IMAGE_CLASSES += "sdcard_image-sunxi"
-IMAGE_FSTYPES += "ext3 tar.gz sunxi-sdimg"
+IMAGE_FSTYPES += "ext3 tar.gz wic.gz wic.bmap"
 
 MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"
 
@@ -30,5 +30,18 @@ UBOOT_ENTRYPOINT ?= "0x40008000"
 
 SPL_BINARY ?= "u-boot-sunxi-with-spl.bin"
 
-SERIAL_CONSOLE ?= "115200 ttyS0"
+SERIAL_CONSOLES ?= "115200;ttyS0"
 MACHINE_FEATURES ?= "alsa apm keyboard rtc serial screen usbgadget usbhost vfat"
+
+# Mimic the sdcard_image-sunxi.bbclass
+# image-version-info file was also generated and installed to boot partition,
+# but it is missing here - can be added somehow (how?) if required
+SUNXI_FEX_FILE ?= " "
+SUNXI_BOOT_SPACE ?= "40"
+IMAGE_BOOT_FILES ?= "${KERNEL_IMAGETYPE} boot.scr"
+# ship fex file for sunxi kernel, devicetree file for mainline kernel
+IMAGE_BOOT_FILES += "${@bb.utils.contains('PREFERRED_PROVIDER_virtual/kernel', 'linux-sunxi', '${SUNXI_FEX_FILE}', '${KERNEL_DEVICETREE}', d)}"
+WKS_FILES ?= "sunxi-sdcard-image.wks.in"
+WKS_FILE_DEPENDS ?= "virtual/kernel u-boot"
+# in case of sunxi kernel, sunxi-board-fex must be built prior wic image assembly
+WKS_FILE_DEPENDS += " ${@bb.utils.contains('PREFERRED_PROVIDER_virtual/kernel', 'linux-sunxi', 'sunxi-board-fex', '', d)}"

conf/machine/include/sunxi64.inc

@@ -1,14 +1,15 @@
 SOC_FAMILY ??= ""
 include conf/machine/include/soc-family.inc
 
+MACHINEOVERRIDES =. "sunxi:sunxi64:"
+
 PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
 PREFERRED_PROVIDER_u-boot ?= "u-boot"
 PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
 
 KERNEL_IMAGETYPE ?= "Image"
 
-IMAGE_CLASSES += "sdcard_image-sunxi"
-IMAGE_FSTYPES += "ext4 tar.gz sunxi-sdimg"
+IMAGE_FSTYPES += "ext4 tar.gz wic.gz wic.bmap"
 
 MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"
 
@@ -17,8 +18,34 @@ UBOOT_LOCALVERSION = "-g${@d.getVar('SRCPV', True).partition('+')[2][0:7]}"
 UBOOT_ENTRYPOINT ?= "0x40008000"
 UBOOT_LOADADDRESS ?= "0x400080OB00"
 
-UBOOT_BINARY ?= "u-boot.itb"
-SPL_BINARY ?= "spl/sunxi-spl.bin"
+#UBOOT_BINARY ?= "u-boot.itb"
+SPL_BINARY ?= "u-boot-sunxi-with-spl.bin"
 
-SERIAL_CONSOLE ?= "115200 ttyS0"
+SERIAL_CONSOLES ?= "115200;ttyS0"
 MACHINE_FEATURES ?= "alsa apm keyboard rtc serial screen usbgadget usbhost vfat"
+
+# arm64 dbts are under <vendor>/dts but is deployed under DEPLOYDIR 
+do_fix_device_tree_location() {
+
+    for kdt in ${KERNEL_DEVICETREE}
+    do
+        local dbt_dir=$(dirname ${kdt})
+        if [ "." != "${dbt_dir}" ] ; then
+            local dbt=$(basename ${kdt})
+            local dst=${DEPLOY_DIR_IMAGE}/${dbt_dir}/${dbt}
+            if [ ! -f ${dst} ] ; then
+                mkdir -p ${DEPLOY_DIR_IMAGE}/$dbt_dir
+                ln -s ${DEPLOY_DIR_IMAGE}/${dbt} ${dst}
+            fi
+        fi
+    done
+}
+
+
+addtask do_fix_device_tree_location after do_write_wks_template before do_image_wic
+
+SUNXI_BOOT_SPACE ?= "40"
+IMAGE_BOOT_FILES ?= "${KERNEL_IMAGETYPE} boot.scr ${KERNEL_DEVICETREE}"
+
+WKS_FILES ?= "sunxi-sdcard-image.wks.in"
+WKS_FILE_DEPENDS ?= "virtual/kernel u-boot"

conf/machine/licheepi-zero.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: licheepi-zero
+#@DESCRIPTION: Machine configuration for the licheepi-zero, based on allwinner V3s CPU
+
+require conf/machine/include/sun8i.inc
+
+
+UBOOT_MACHINE = "LicheePi_Zero_defconfig"
+KERNEL_DEVICETREE = "sun8i-v3s-licheepi-zero.dtb"

conf/machine/marsboard-a10.conf

@@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: HAOYU Electronics MarsBoard A10
+#@DESCRIPTION: Machine configuration for the HAOYU Electronics MarsBoard A10, based on Allwinner A10 CPU
+#https://linux-sunxi.org/MarsBoard_A10
+
+require conf/machine/include/sun4i.inc
+
+KERNEL_DEVICETREE = "sun4i-a10-marsboard.dtb"
+UBOOT_MACHINE = "Marsboard_A10_config"
+SUNXI_FEX_FILE = "sys_config/a10/marsboard_a10.fex"

conf/machine/nanopi-m1.conf

@@ -0,0 +1,8 @@
+#@TYPE: Machine
+#@NAME: NanoPi M1
+#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo, based on #the Allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-nanopi-m1.dtb"
+UBOOT_MACHINE = "nanopi_m1_defconfig"

conf/machine/nanopi-neo-plus2.conf

@@ -4,6 +4,7 @@
 # on the Allwinner H5 SoC.
 
 require conf/machine/include/sun50i.inc
+require conf/machine/include/hardware/ap6212a.inc
 
 KERNEL_DEVICETREE = "allwinner/sun50i-h5-nanopi-neo-plus2.dtb"
 UBOOT_MACHINE = "nanopi_neo_plus2_defconfig"

conf/machine/nanopi-r1.conf

@@ -0,0 +1,8 @@
+#@TYPE: Machine
+#@NAME: NanoPi R1
+#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi R1, based on #the Allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-nanopi-r1.dtb"
+UBOOT_MACHINE = "nanopi_r1_defconfig"

conf/machine/orange-pi-one-plus.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: orange-pi-one-plus
+#@DESCRIPTION: Machine configuration for the Orange Pi One Plus, based on Allwinner H6 CPU
+
+
+require conf/machine/include/sun50i-h6.inc
+
+KERNEL_DEVICETREE = "allwinner/sun50i-h6-orangepi-one-plus.dtb"
+UBOOT_MACHINE = "orangepi_one_plus_defconfig"

conf/machine/orange-pi-pc2.conf

@@ -0,0 +1,8 @@
+#@TYPE: Machine
+#@NAME: orangepi-pc2
+#@DESCRIPTION: Machine configuration for the orangepi-pc2, based on Allwinner A64 CPU
+
+require conf/machine/include/sun50i.inc
+
+KERNEL_DEVICETREE = "allwinner/sun50i-h5-orangepi-pc2.dtb"
+UBOOT_MACHINE = "orangepi_pc2_defconfig"

conf/machine/orange-pi-r1.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: orange-pi-r1
+#@DESCRIPTION: Machine configuration for the orange-pi-r1, base on allwinner H2+ CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h2-plus-orangepi-r1.dtb"
+UBOOT_MACHINE = "orangepi_r1_defconfig"
+

conf/machine/orange-pi-zero-plus2-h3.conf

@@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: orange-pi-zero-plus2-h3
+#@DESCRIPTION: Machine configuration for the orange-pi-zero-plus2, based on Allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+require conf/machine/include/hardware/ap6212a.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-orangepi-zero-plus2.dtb"
+UBOOT_MACHINE = "orangepi_zero_plus2_h3_defconfig"

conf/machine/orange-pi-zero-plus2.conf

@@ -2,8 +2,8 @@
 #@NAME: orange-pi-zero-plus2
 #@DESCRIPTION: Machine configuration for the orange-pi-zero-plus2, base on Allwinner H5 CPU
 
-
 require conf/machine/include/sun50i.inc
+require conf/machine/include/hardware/ap6212a.inc
 
 KERNEL_DEVICETREE = "allwinner/sun50i-h5-orangepi-zero-plus2.dtb"
 UBOOT_MACHINE = "orangepi_zero_plus2_defconfig"

conf/machine/orange-pi-zero.conf

@@ -1,6 +1,6 @@
 #@TYPE: Machine
-#@NAME: orange-pi-one
-#@DESCRIPTION: Machine configuration for the orange-pi-one, base on allwinner H3 CPU
+#@NAME: orange-pi-zero
+#@DESCRIPTION: Machine configuration for the orange-pi-zero, based on Allwinner H2 CPU
 
 require conf/machine/include/sun8i.inc
 

conf/machine/orange-pi-zero2.conf

@@ -0,0 +1,16 @@
+#@TYPE: Machine
+#@NAME: orange-pi-zero-2
+#@DESCRIPTION: Machine configuration for the orange-pi-zero-2, based on Allwinner H616 CPU
+
+require conf/machine/include/sun50i-h616.inc
+
+KERNEL_DEVICETREE = "allwinner/sun50i-h616-orangepi-zero2.dtb"
+UBOOT_MACHINE = "orangepi_zero2_defconfig"
+
+SPL_BINARY = "u-boot-sunxi-with-spl.bin"
+
+# as for now neither graphics nor audio is supported
+MACHINE_FEATURES:remove = "alsa x11"
+MACHINE_FEATURES:append = "bluetooth wifi"
+
+MACHINE_EXTRA_RRECOMMENDS = "uwe5622-firmware"

recipes-bsp/atf/atf-sunxi_git.bb

@@ -1,27 +0,0 @@
-DESCRIPTION = "ARM Trusted Firmware Allwinner"
-LICENSE = "BSD"
-LIC_FILES_CHKSUM = "file://license.md;md5=829bdeb34c1d9044f393d5a16c068371"
-
-SRC_URI = "git://github.com/apritzel/arm-trusted-firmware;nobranch=1"
-SRCREV = "aa75c8da415158a94b82a430b2b40000778e851f"
-
-S = "${WORKDIR}/git"
-B = "${WORKDIR}/build"
-
-COMPATIBLE_MACHINE = "(sun50i)"
-
-PLATFORM_sun50i = "sun50iw1p1"
-
-LDFLAGS[unexport] = "1"
-
-do_compile() {
-    oe_runmake -C ${S} BUILD_BASE=${B} \
-      CROSS_COMPILE=${TARGET_PREFIX} \
-      PLAT=${PLATFORM} \
-      bl31 \
-      all
-}
-
-do_install() {
-    install -D -p -m 0644 ${B}/${PLATFORM}/release/bl31.bin ${DEPLOY_DIR_IMAGE}/bl31.bin
-}

recipes-bsp/sunxi-board-fex/sunxi-board-fex.bb

@@ -9,9 +9,9 @@ PR = "r0"
 
 COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
 
-SRC_URI = "git://github.com/linux-sunxi/sunxi-boards.git;protocol=git"
+SRC_URI = "git://github.com/linux-sunxi/sunxi-boards.git;protocol=https;branch=master"
 # Increase PV with SRCREV change
-SRCREV = "496ef0fbd166cc2395daa76dd3c359357420963d"
+SRCREV = "af5f938ea14a3614d35ad3d9ab51a5d392117444"
 
 S = "${WORKDIR}/git"
 

recipes-bsp/trusted-firmware-a/trusted-firmware-a_%.bbappend

@@ -0,0 +1,7 @@
+COMPATIBLE_MACHINE = "(sun50i|sun50i-h616|sun50i-h6)"
+
+TFA_PLATFORM:sun50i = "sun50i_a64"
+TFA_PLATFORM:sun50i-h6 = "sun50i_h6"
+TFA_PLATFORM:sun50i-h616 = "sun50i_h616"
+
+TFA_BUILD_TARGET = "bl31"

recipes-bsp/u-boot/files/0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch

@@ -1,9 +1,9 @@
-From 6adb2ebdc4022c24497e9ee4dccab41d18e3105d Mon Sep 17 00:00:00 2001
+From 6a64d90ca4d976c16a2e102dbad0848e4d29776c Mon Sep 17 00:00:00 2001
 From: Florin Sarbu <florin@resin.io>
 Date: Wed, 12 Sep 2018 14:22:49 +0200
 Subject: [PATCH] nanopi_neo_air_defconfig: Enable eMMC support
 
-Upstream-status: Pending
+Upstream-Status: Pending
 Signed-off-by: Florin Sarbu <florin@resin.io>
 
 ---
@@ -11,11 +11,11 @@ Signed-off-by: Florin Sarbu <florin@resin.io>
  1 file changed, 1 insertion(+)
 
 diff --git a/configs/nanopi_neo_air_defconfig b/configs/nanopi_neo_air_defconfig
-index 5ad90ddd16..8b7a4eb45d 100644
+index 806d95c1cc..8899cc3a15 100644
 --- a/configs/nanopi_neo_air_defconfig
 +++ b/configs/nanopi_neo_air_defconfig
-@@ -15,3 +15,4 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-neo-air"
+@@ -9,3 +9,4 @@ CONFIG_DRAM_CLK=408
+ CONFIG_CONSOLE_MUX=y
  CONFIG_USB_EHCI_HCD=y
  CONFIG_USB_OHCI_HCD=y
- CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
 +CONFIG_MMC_SUNXI_SLOT_EXTRA=2

recipes-bsp/u-boot/files/0002-Added-nanopi-r1-board-support.patch

@@ -0,0 +1,42 @@
+From 767a05572ef5b93c2e157749b1754cbe261ee43d Mon Sep 17 00:00:00 2001
+From: Marek Belisko <marek.belisko@open-nandra.com>
+Date: Fri, 8 Apr 2022 11:33:53 +0200
+Subject: [PATCH] Added nanopi-r1 board support
+
+Patch taken from : https://github.com/armbian/build/blob/master/patch/u-boot/u-boot-sunxi/add-nanopi-r1-and-duo2.patch
+
+Upstream-Status: Pending
+
+Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
+---
+diff --git a/configs/nanopi_r1_defconfig b/configs/nanopi_r1_defconfig
+new file mode 100644
+index 0000000..e028b41
+--- /dev/null
++++ b/configs/nanopi_r1_defconfig
+@@ -0,0 +1,22 @@
++CONFIG_ARM=y
++CONFIG_ARCH_SUNXI=y
++CONFIG_SPL=y
++CONFIG_MACH_SUN8I_H3=y
++CONFIG_DRAM_CLK=408
++CONFIG_DRAM_ZQ=3881979
++CONFIG_DRAM_ODT_EN=y
++CONFIG_MACPWR="PD6"
++# CONFIG_VIDEO_DE2 is not set
++CONFIG_NR_DRAM_BANKS=1
++# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
++CONFIG_CONSOLE_MUX=y
++CONFIG_SYS_CLK_FREQ=480000000
++# CONFIG_CMD_FLASH is not set
++# CONFIG_SPL_DOS_PARTITION is not set
++# CONFIG_SPL_EFI_PARTITION is not set
++CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-r1"
++CONFIG_SUN8I_EMAC=y
++CONFIG_USB_EHCI_HCD=y
++CONFIG_USB_OHCI_HCD=y
++CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
++CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+-- 
+2.7.4
+

recipes-bsp/u-boot/files/bananapi-m64/boot.cmd

@@ -0,0 +1,11 @@
+# Default to (primary) SD
+rootdev=mmcblk0p2
+if itest.b *0x28 == 0x02 ; then
+	# U-Boot loaded from eMMC or secondary SD so use it for rootfs too
+	echo "U-boot loaded from eMMC or secondary SD"
+	rootdev=mmcblk2p2
+fi
+setenv bootargs console=${console} console=tty1 root=/dev/${rootdev} rootwait panic=10 ${extra}
+load mmc 0:1 ${fdt_addr_r} ${fdtfile}
+load mmc 0:1 ${kernel_addr_r} Image
+booti ${kernel_addr_r} - ${fdt_addr_r}

recipes-bsp/u-boot/u-boot-sunxi.bb

@@ -2,7 +2,7 @@ DESCRIPTION = "U-Boot port for sunxi"
 
 require recipes-bsp/u-boot/u-boot.inc
 
-LICENSE = "GPLv2"
+LICENSE = "GPL-2.0-only"
 LIC_FILES_CHKSUM = "file://Licenses/gpl-2.0.txt;md5=b234ee4d69f5fce4486a80fdaf4a4263"
 
 # No patches for other machines yet
@@ -19,9 +19,10 @@ UBOOT_MACHINE_olinuxino-a10s = "A10s-OLinuXino-Micro_config"
 UBOOT_MACHINE_meleg = "Mele_A1000G_config"
 
 SRC_URI = " \
-	git://github.com/linux-sunxi/u-boot-sunxi.git;protocol=git;branch=sunxi \
-	file://0002-gcc5-fixes.patch \
-	file://0003-gcc6-fixes.patch \
+	git://github.com/linux-sunxi/u-boot-sunxi.git;protocol=https;branch=sunxi \
+	file://0001-gcc5-fixes.patch \
+	file://0002-gcc6-fixes.patch \
+	file://0003-No-gcc-version-specific-includes.patch \
 	"
 
 PE = "1"
@@ -35,3 +36,7 @@ S = "${WORKDIR}/git"
 PACKAGE_ARCH = "${MACHINE_ARCH}"
 
 SPL_BINARY="u-boot-sunxi-with-spl.bin"
+
+do_configure () {
+    oe_runmake -C ${S} O=${B} ${UBOOT_MACHINE}
+}

recipes-bsp/u-boot/u-boot-sunxi/0003-No-gcc-version-specific-includes.patch

@@ -0,0 +1,24 @@
+From bc4aa5814cbedbfaa1c79dfe7ea2571fee7f2d51 Mon Sep 17 00:00:00 2001
+From: Andrey Lebedev <andrey@lebedev.lt>
+Date: Wed, 22 Jan 2020 20:00:11 +0200
+Subject: [PATCH] No gcc version-specific includes
+
+In order to support gcc-5 and above. Fixes compilation errors like
+
+linux/compiler-gcc9.h: No such file or directory
+---
+ include/linux/compiler-gcc.h | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
+index 9896e547b9..5f0bd65f3a 100644
+--- a/include/linux/compiler-gcc.h
++++ b/include/linux/compiler-gcc.h
+@@ -90,4 +90,3 @@
+ #define __gcc_header(x) #x
+ #define _gcc_header(x) __gcc_header(linux/compiler-gcc##x.h)
+ #define gcc_header(x) _gcc_header(x)
+-#include gcc_header(__GNUC__)
+-- 
+2.20.1
+

recipes-bsp/u-boot/u-boot_%.bbappend

@@ -1,29 +1,30 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
+FILESEXTRAPATHS:prepend:sunxi := "${THISDIR}/files:"
 
-DEPENDS += " bc-native dtc-native swig-native python3-native flex-native bison-native "
-DEPENDS_append_sun50i = " atf-sunxi "
+DEPENDS:append:sunxi = " bc-native dtc-native swig-native python3-native flex-native bison-native "
+DEPENDS:append:sun50i = " trusted-firmware-a"
 
-COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
+COMPATIBLE_MACHINE:sunxi = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
 
-DEFAULT_PREFERENCE_sun4i="1"
-DEFAULT_PREFERENCE_sun5i="1"
-DEFAULT_PREFERENCE_sun7i="1"
-DEFAULT_PREFERENCE_sun8i="1"
-DEFAULT_PREFERENCE_sun50i="1"
+DEFAULT_PREFERENCE:sun4i = "1"
+DEFAULT_PREFERENCE:sun5i = "1"
+DEFAULT_PREFERENCE:sun7i = "1"
+DEFAULT_PREFERENCE:sun8i = "1"
+DEFAULT_PREFERENCE:sun50i = "1"
 
-SRC_URI += " \
-           file://0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch \
-           file://boot.cmd \
-           "
+SRC_URI:append:sunxi = " \
+        file://0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch \
+	file://0002-Added-nanopi-r1-board-support.patch \
+        file://boot.cmd \
+"
 
-UBOOT_ENV_SUFFIX = "scr"
-UBOOT_ENV = "boot"
+UBOOT_ENV_SUFFIX:sunxi = "scr"
+UBOOT_ENV:sunxi = "boot"
 
-EXTRA_OEMAKE += ' HOSTLDSHARED="${BUILD_CC} -shared ${BUILD_LDFLAGS} ${BUILD_CFLAGS}" '
-EXTRA_OEMAKE_append_sun50i = " BL31=${DEPLOY_DIR_IMAGE}/bl31.bin "
+EXTRA_OEMAKE:append:sunxi = ' HOSTLDSHARED="${BUILD_CC} -shared ${BUILD_LDFLAGS} ${BUILD_CFLAGS}" '
+EXTRA_OEMAKE:append:sun50i = " BL31=${DEPLOY_DIR_IMAGE}/bl31.bin SCP=/dev/null"
 
-do_compile_sun50i[depends] += "atf-sunxi:do_deploy"
+do_compile:sun50i[depends] += "trusted-firmware-a:do_deploy"
 
-do_compile_append() {
+do_compile:append:sunxi() {
     ${B}/tools/mkimage -C none -A arm -T script -d ${WORKDIR}/boot.cmd ${WORKDIR}/${UBOOT_ENV_BINARY}
 }

recipes-devtools/python/files/setup.py.patch

@@ -1,51 +0,0 @@
---- pyA20-0.2.1/setup.py	2014-09-04 12:17:18.000000000 +0200
-+++ pyA20-0.2.1/setup.py	2014-11-24 17:44:37.000000000 +0100
-@@ -43,31 +43,31 @@
-     Detect processor type
-     :return:
-     """
--    cpuinfo = open("/proc/cpuinfo", 'r')
--    for line in cpuinfo:
--        if "Hardware" in line:
--            processor = line.split(":")[1].rstrip()
-+    #cpuinfo = open("/proc/cpuinfo", 'r')
-+    #for line in cpuinfo:
-+    #    if "Hardware" in line:
-+    #        processor = line.split(":")[1].rstrip()
- 
--            if "sun4i" in processor:
--                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A10)")
-+    #        if "sun4i" in processor:
-+    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A10)")
- 
--            elif "sun5i" in processor:
--                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A13)")
-+    #        elif "sun5i" in processor:
-+    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A13)")
- 
--            elif "sun7i" in processor:
--                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A20)")
-+    #        elif "sun7i" in processor:
-+    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A20)")
- 
--            else:
--                print ("Detected processor: " + print_color("unknown"))
-+    #        else:
-+    #            print ("Detected processor: " + print_color("unknown"))
- 
- 
--            if processor_type not in processor:
--                print_warning()
-+    #        if processor_type not in processor:
-+    #            print_warning()
- 
--            return
-+    return
- 
--    print ("No processor detected")
--    print_warning()
-+    #print ("No processor detected")
-+    #print_warning()
- 
- 
- class build_ext(_build_ext):

recipes-devtools/python/pya20_0.2.12.bb

@@ -1,24 +1,23 @@
 DESCRIPTION = "A module to control Allwinner GPIO,SPI and I2C channels"
 HOMEPAGE = "https://pypi.python.org/pypi/pyA20"
 SECTION = "devel/python"
-LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://PKG-INFO;md5=bfe0261ded6cff75086193ec2f79129e"
-DEPENDS = "python"
+LICENSE = "GPL-3.0-only"
+LIC_FILES_CHKSUM = "file://PKG-INFO;md5=4e584373bb0f46ef1e423cb7df37847d"
+DEPENDS = "python3"
 
 # No GPIO mappings for other machines yet
 COMPATIBLE_MACHINE = "(olinuxino-a13|olinuxino-a10|olinuxino-a20|olinuxino-a10lime|olinuxino-a20lime|olinuxino-a20lime2|olinuxino-a13som|olinuxino-a20som)"
 
 SRC_URI = "https://pypi.python.org/packages/source/p/pyA20/pyA20-${PV}.tar.gz \
-           file://setup.py.patch \
            file://mapping.h \
           "
 S = "${WORKDIR}/pyA20-${PV}"
 
-inherit distutils
+inherit distutils3
 
-do_compile_prepend() { 
+do_compile:prepend() { 
 cp ${WORKDIR}/mapping.h ${S}/pyA20/gpio/mapping.h
 }
 
-SRC_URI[md5sum] = "2290066bbe274000c53693959a8005b4"
-SRC_URI[sha256sum] = "b15e4ee1016b7eb52001cbccde3751868624a88d2adbb9adc5404628f7e59e7e"
+SRC_URI[md5sum] = "cab03b4931199804603d1074f6d8f48f"
+SRC_URI[sha256sum] = "4bef559a9c5a4d648d9834bad996cf2805b20d6063b8051029ffdf9deda2b536"

recipes-devtools/python/pya20som_0.2.1.bb

@@ -1,24 +0,0 @@
-DESCRIPTION = "A module to control Allwinner GPIO,SPI and I2C channels"
-HOMEPAGE = "https://pypi.python.org/pypi/pyA20SOM"
-SECTION = "devel/python"
-LICENSE = "MIT"
-LIC_FILES_CHKSUM = "file://PKG-INFO;md5=cf6345f2cb2acee98b01c493d68b8322"
-DEPENDS = "python"
-
-# No GPIO mappings for other machines yet
-COMPATIBLE_MACHINE = "olinuxino-a20som"
-
-SRC_URI = "https://pypi.python.org/packages/source/p/pyA20SOM/pyA20SOM-${PV}.tar.gz \
-           file://setup.py.patch \
-           file://mapping.h \
-          "
-S = "${WORKDIR}/pyA20SOM-${PV}"
-
-inherit distutils
-
-do_compile_prepend() { 
-cp ${WORKDIR}/mapping.h ${S}/pyA20SOM/gpio/mapping.h
-}
-
-SRC_URI[md5sum] = "a720115ef1d3dffe82f42f2157ca1c56"
-SRC_URI[sha256sum] = "1ac1025596cc112964f7caac9a6a523d5da61623c248ccc178c6cbb4bc1b4549"

recipes-graphics/libgles/sunxi-mali_git.bb

@@ -21,8 +21,8 @@ python __anonymous() {
         raise bb.parse.SkipPackage("%s-%s ONLY supports hardfp mode for now" % (pkgn, pkgv))
 }
 
-SRCREV_pn-${PN} = "d343311efc8db166d8371b28494f0f27b6a58724"
-SRC_URI = "gitsm://github.com/linux-sunxi/sunxi-mali.git \
+SRCREV = "d343311efc8db166d8371b28494f0f27b6a58724"
+SRC_URI = "git://github.com/linux-sunxi/sunxi-mali.git;protocol=https;branch=master \
            file://0001-Add-EGLSyncKHR-EGLTimeKHR-and-GLChar-definition.patch \
            file://0002-Add-missing-GLchar-definition.patch \
            file://0003-Fix-sed-to-replace-by-the-correct-var.patch \
@@ -92,13 +92,13 @@ do_install() {
 # Packages like xf86-video-fbturbo dlopen() libUMP.so, so we do need to ship the .so files in ${PN}
 PACKAGES =+ "${PN}-test"
 
-RPROVIDES_${PN} += "libGLESv2.so libEGL.so libGLESv2.so libGLESv1_CM.so libMali.so"
-RDEPENDS_${PN}-test = "${PN}"
+RPROVIDES:${PN} += "libGLESv2.so libEGL.so libGLESv2.so libGLESv1_CM.so libMali.so"
+RDEPENDS:${PN}-test = "${PN}"
 
-FILES_${PN} += "${libdir}/lib*.so"
-FILES_${PN}-dev = "${includedir} ${libdir}/pkgconfig/*"
-FILES_${PN}-test = "${bindir}/sunximali-test"
+FILES:${PN} += "${libdir}/lib*.so"
+FILES:${PN}-dev = "${includedir} ${libdir}/pkgconfig/*"
+FILES:${PN}-test = "${bindir}/sunximali-test"
 
 # These are closed binaries generated elsewhere so don't check ldflags & text relocations
-INSANE_SKIP_${PN} = "dev-so ldflags textrel"
-INSANE_SKIP_${PN}-test = "dev-so ldflags textrel"
+INSANE_SKIP:${PN} = "dev-so ldflags textrel"
+INSANE_SKIP:${PN}-test = "dev-so ldflags textrel"

recipes-graphics/libump/libump_git.bb

@@ -1,14 +1,14 @@
 DESCRIPTION = "Unified Memory Provider userspace API source code needed for xf86-video-mali compilation"
 
-LICENSE = "Apache-2"
+LICENSE = "Apache-2.0"
 LIC_FILES_CHKSUM = "file://debian/copyright;md5=edf7fb6071cae7ec80d537a05ee17198"
 
 inherit autotools
 
 PV = "r4p0-00rel0+git${SRCPV}"
-SRCREV_pn-${PN} = "ec0680628744f30b8fac35e41a7bd8e23e59c39f"
+SRCREV = "ec0680628744f30b8fac35e41a7bd8e23e59c39f"
 
-SRC_URI = "git://github.com/linux-sunxi/libump.git"
+SRC_URI = "git://github.com/linux-sunxi/libump.git;protocol=https;branch=master"
 
 S = "${WORKDIR}/git"
 

recipes-graphics/mesa/mesa-gl_%.bbappend

@@ -0,0 +1 @@
+PACKAGECONFIG:class-target = "opengl x11 gallium"

recipes-graphics/mesa/mesa_%.bbappend

@@ -0,0 +1,5 @@
+# Enable lima and panfrost Mesa drivers
+PACKAGECONFIG:append:use-mailine-graphics = " lima panfrost"
+# Enable KMS renderonly Mesa support
+# See https://cgit.freedesktop.org/mesa/mesa/commit/?id=2b780fe89300199f2334539aa1678e9b68f0434f
+GALLIUMDRIVERS:append:use-mailine-graphics = ",kmsro"

recipes-graphics/tslib/tslib_1.1.bbappend.disabled

@@ -1,4 +1,4 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
 
 SRC_URI += "file://tslib.patch"
 

recipes-graphics/xorg-xserver/libdri2_git.bb

@@ -1,6 +1,6 @@
 DESCRIPTION = "Library for the DRI2 extension to the X Window System"
 
-LICENSE = "MIT-X"
+LICENSE = "MIT-CMU"
 LIC_FILES_CHKSUM = "file://COPYING;md5=827da9afab1f727f2a66574629e0f39c"
 
 DEPENDS = "libdrm libxext libxfixes xorgproto"
@@ -9,7 +9,7 @@ PE = "1"
 PV = "1.0.0+git${SRCPV}"
 SRC_URI = "git://github.com/robclark/libdri2.git;protocol=http;branch=master"
 
-SRCREV_pn-${PN} = "4f1eef3183df2b270c3d5cbef07343ee5127a6a4"
+SRCREV = "4f1eef3183df2b270c3d5cbef07343ee5127a6a4"
 
 S = "${WORKDIR}/git"
 

recipes-graphics/xorg-xserver/xf86-video-fbturbo_git.bb

@@ -2,14 +2,14 @@ require recipes-graphics/xorg-driver/xorg-driver-video.inc
 
 DESCRIPTION = "X.Org X server -- A10/A13 display driver"
 
-LICENSE = "MIT-X"
+LICENSE = "MIT-CMU"
 LIC_FILES_CHKSUM = "file://COPYING;md5=f91dc3ee5ce59eb4b528e67e98a31266"
 
 DEPENDS += "sunxi-mali libump xorgproto"
 
 PE = "3"
 PV = "0.5.1+git${SRCPV}"
-SRCREV_pn-${PN} = "e094e3c8f9004ca3347694bd05b99d136e8621b9"
+SRCREV = "e094e3c8f9004ca3347694bd05b99d136e8621b9"
 
 SRC_URI = "git://github.com/ssvb/xf86-video-fbturbo.git;protocol=http;branch=master \
            file://20-fbturbo.conf"
@@ -18,9 +18,9 @@ S = "${WORKDIR}/git"
 
 CFLAGS += " -I${STAGING_INCDIR}/xorg "
 
-do_install_append() {
+do_install:append() {
     install -d ${D}${datadir}/X11/xorg.conf.d
     install -m 0644 ${WORKDIR}/20-fbturbo.conf ${D}${datadir}/X11/xorg.conf.d
 }
 
-FILES_${PN} += "${datadir}/X11/xorg.conf.d/20-fbturbo.conf"
+FILES:${PN} += "${datadir}/X11/xorg.conf.d/20-fbturbo.conf"

recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend

@@ -1 +1 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"

recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend

@@ -0,0 +1 @@
+DEPENDS += "libxshmfence"

recipes-kernel/linux-firmware/linux-firmware_%.bbappend

@@ -0,0 +1,13 @@
+# The brcmfmac driver looks for NVRAM files using the first entry in board
+# compatible since kernel >= 5.0:
+# https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0ad4b55b2f29784f93875e6231bf57cd233624a2
+# We create a link to the AP6212 module NVRAM file so that firmware is
+# autodetected by the driver.
+# WARNING: The following commit is required for NVRAM files to be included in
+# linux-firmware-bcm43430 package:
+# http://git.openembedded.org/openembedded-core/commit/?id=dde0f79f32fa6bab045ef60199903f74c4cc3393
+do_install:append() {
+	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2.txt
+	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2-h3.txt
+	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt
+}

recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0003-drv-fix-incldue-path-for-unisocwcn.patch

@@ -0,0 +1,45 @@
+From 5138d597275fd503573fac84018186bd18740644 Mon Sep 17 00:00:00 2001
+From: pbiel <pbiel7@gmail.com>
+Date: Thu, 30 Mar 2023 22:45:33 +0200
+Subject: [PATCH] Fix incldue path for unisocwcn
+
+---
+ drivers/net/wireless/uwe5622/Makefile           | 4 +++-
+ drivers/net/wireless/uwe5622/unisocwcn/Makefile | 6 +++---
+ 2 files changed, 6 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/net/wireless/uwe5622/Makefile b/drivers/net/wireless/uwe5622/Makefile
+index 313ea5123..e9a398584 100644
+--- a/drivers/net/wireless/uwe5622/Makefile
++++ b/drivers/net/wireless/uwe5622/Makefile
+@@ -2,7 +2,9 @@ obj-$(CONFIG_AW_WIFI_DEVICE_UWE5622) += unisocwcn/
+ obj-$(CONFIG_WLAN_UWE5622)    += unisocwifi/
+ obj-$(CONFIG_TTY_OVERY_SDIO)  += tty-sdio/
+ 
+-UNISOCWCN_DIR := $(shell cd $(src)/unisocwcn/ && /bin/pwd)
++mkfile_path := $(abspath $(lastword $(MAKEFILE_LIST)))
++UNISOCWCN_DIR := $(dir $(mkfile_path))/unisocwcn/
++
+ UNISOC_BSP_INCLUDE := $(UNISOCWCN_DIR)/include
+ export UNISOC_BSP_INCLUDE
+ 
+diff --git a/drivers/net/wireless/uwe5622/unisocwcn/Makefile b/drivers/net/wireless/uwe5622/unisocwcn/Makefile
+index f9c595747..1ad490594 100644
+--- a/drivers/net/wireless/uwe5622/unisocwcn/Makefile
++++ b/drivers/net/wireless/uwe5622/unisocwcn/Makefile
+@@ -129,9 +129,9 @@ ccflags-y += -DCONFIG_WCN_BOOT
+ ccflags-y += -DCONFIG_WCN_UTILS
+ 
+ #### include path ######
+-ccflags-y += -I$(src)/include/
+-ccflags-y += -I$(src)/platform/
+-ccflags-y += -I$(src)/platform/rf/
++ccflags-y += -I$(srctree)/$(src)/include/
++ccflags-y += -I$(srctree)/$(src)/platform/
++ccflags-y += -I$(srctree)/$(src)/platform/rf/
+ 
+ #### add cflag for Customer ######
+ ### ---------- Hisilicon start ---------- ###
+-- 
+2.34.1
+

recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0004-drv-wireless-adapt-uwe5622-wifi-driver-to-kernel-6.1.patch

@@ -0,0 +1,177 @@
+From 5f4d2d5fc32dfe41c73cac36ec6747c34e5562a3 Mon Sep 17 00:00:00 2001
+From: pbiel <pbiel7@gmail.com>
+Date: Wed, 15 Mar 2023 23:04:27 +0100
+Subject: [PATCH] wireless: Adapt uwe5622 wifi driver to kernel 6.1
+
+---
+ drivers/net/wireless/uwe5622/tty-sdio/lpm.c            |  2 +-
+ .../uwe5622/unisocwcn/boot/wcn_integrate_dev.c         |  2 +-
+ .../uwe5622/unisocwcn/platform/wcn_parn_parser.c       |  2 +-
+ .../wireless/uwe5622/unisocwcn/platform/wcn_procfs.c   |  2 +-
+ .../wireless/uwe5622/unisocwcn/usb/wcn_usb_download.c  |  2 +-
+ .../net/wireless/uwe5622/unisocwcn/usb/wcn_usb_test.c  |  6 +++---
+ drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c     | 10 +++++-----
+ drivers/net/wireless/uwe5622/unisocwifi/cmdevt.c       |  2 +-
+ 8 files changed, 14 insertions(+), 14 deletions(-)
+
+diff --git a/drivers/net/wireless/uwe5622/tty-sdio/lpm.c b/drivers/net/wireless/uwe5622/tty-sdio/lpm.c
+index b2d9a8994e5e..35e30651a921 100644
+--- a/drivers/net/wireless/uwe5622/tty-sdio/lpm.c
++++ b/drivers/net/wireless/uwe5622/tty-sdio/lpm.c
+@@ -70,7 +70,7 @@ static int btwrite_proc_show(struct seq_file *m, void *v)
+ 
+ static int bluesleep_open_proc_btwrite(struct inode *inode, struct file *file)
+ {
+-	return single_open(file, btwrite_proc_show, PDE_DATA(inode));
++	return single_open(file, btwrite_proc_show, pde_data(inode));
+ }
+ 
+ static const struct proc_ops lpm_proc_btwrite_fops = {
+diff --git a/drivers/net/wireless/uwe5622/unisocwcn/boot/wcn_integrate_dev.c b/drivers/net/wireless/uwe5622/unisocwcn/boot/wcn_integrate_dev.c
+index 3ee6910e7cf7..29a3ec298bc1 100644
+--- a/drivers/net/wireless/uwe5622/unisocwcn/boot/wcn_integrate_dev.c
++++ b/drivers/net/wireless/uwe5622/unisocwcn/boot/wcn_integrate_dev.c
+@@ -562,7 +562,7 @@ static struct wcn_proc_data g_proc_data = {
+ static int wcn_platform_open(struct inode *inode, struct file *filp)
+ {
+ 	struct platform_proc_file_entry
+-	*entry = (struct platform_proc_file_entry *)PDE_DATA(inode);
++	*entry = (struct platform_proc_file_entry *)pde_data(inode);
+ 
+ 	WCN_INFO("entry name:%s\n!", entry->name);
+ 
+diff --git a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c
+index aea7d6d0fe57..bd841f0b32d3 100644
+--- a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c
++++ b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c
+@@ -146,7 +146,7 @@ static int prefixcmp(const char *str, const char *prefix)
+ }
+ 
+ #if KERNEL_VERSION(3, 19, 0) <= LINUX_VERSION_CODE
+-static int find_callback(struct dir_context *ctx, const char *name, int namlen,
++static bool find_callback(struct dir_context *ctx, const char *name, int namlen,
+ 		     loff_t offset, u64 ino, unsigned int d_type)
+ #else
+ static int find_callback(void *ctx, const char *name, int namlen,
+diff --git a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_procfs.c b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_procfs.c
+index 2edb7903d80e..9e453365bba8 100644
+--- a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_procfs.c
++++ b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_procfs.c
+@@ -431,7 +431,7 @@ static const struct proc_ops mdbg_snap_shoot_seq_fops = {
+ static int mdbg_proc_open(struct inode *inode, struct file *filp)
+ {
+ 	struct mdbg_proc_entry *entry =
+-		(struct mdbg_proc_entry *)PDE_DATA(inode);
++		(struct mdbg_proc_entry *)pde_data(inode);
+ 	filp->private_data = entry;
+ 
+ 	return 0;
+diff --git a/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_download.c b/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_download.c
+index 8f228d403909..750bfc0466cb 100644
+--- a/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_download.c
++++ b/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_download.c
+@@ -82,7 +82,7 @@ static int wcn_usb_dopen(struct inode *inode, struct file *file)
+ {
+ 	struct wcn_usb_ddata *data;
+ 
+-	data = (struct wcn_usb_ddata *)PDE_DATA(inode);
++	data = (struct wcn_usb_ddata *)pde_data(inode);
+ 
+ 	if (!data)
+ 		return -EIO;
+diff --git a/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_test.c b/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_test.c
+index c2cccc658c0d..e7a9f258943e 100644
+--- a/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_test.c
++++ b/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_test.c
+@@ -61,7 +61,7 @@ static int wcn_usb_channel_open(struct inode *inode, struct file *file)
+ {
+ 	struct channel *channel;
+ 
+-	channel = (struct channel *)PDE_DATA(inode);
++	channel = (struct channel *)pde_data(inode);
+ 
+ 	if (!channel)
+ 		return -EIO;
+@@ -467,7 +467,7 @@ static int wcn_usb_chnmg_open(struct inode *inode, struct file *file)
+ {
+ 	struct chnmg *chnmg;
+ 	/* get channel_list head */
+-	chnmg = (struct chnmg *)PDE_DATA(inode);
++	chnmg = (struct chnmg *)pde_data(inode);
+ 
+ 	file->private_data = chnmg;
+ 	return 0;
+@@ -916,7 +916,7 @@ static int print_level_open(struct inode *inode, struct file *file)
+ {
+ 	struct chnmg *chnmg;
+ 	/* get channel_list head */
+-	chnmg = (struct chnmg *)PDE_DATA(inode);
++	chnmg = (struct chnmg *)pde_data(inode);
+ 
+ 	file->private_data = chnmg;
+ 	return 0;
+diff --git a/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c b/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c
+index daef880ae3c0..2231388da70a 100644
+--- a/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c
++++ b/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c
+@@ -703,7 +703,7 @@ static int sprdwl_add_cipher_key(struct sprdwl_vif *vif, bool pairwise,
+ }
+ 
+ static int sprdwl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
+-				   u8 key_index, bool pairwise,
++				   int link_id, u8 key_index, bool pairwise,
+ 				   const u8 *mac_addr,
+ 				   struct key_params *params)
+ {
+@@ -725,7 +725,7 @@ static int sprdwl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
+ }
+ 
+ static int sprdwl_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
+-				   u8 key_index, bool pairwise,
++				   int link_id, u8 key_index, bool pairwise,
+ 				   const u8 *mac_addr)
+ {
+ 	struct sprdwl_vif *vif = netdev_priv(ndev);
+@@ -755,7 +755,7 @@ static int sprdwl_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
+ 
+ static int sprdwl_cfg80211_set_default_key(struct wiphy *wiphy,
+ 					   struct net_device *ndev,
+-					   u8 key_index, bool unicast,
++					   int link_id, u8 key_index, bool unicast,
+ 					   bool multicast)
+ {
+ 	struct sprdwl_vif *vif = netdev_priv(ndev);
+@@ -984,7 +984,7 @@ static int sprdwl_cfg80211_change_beacon(struct wiphy *wiphy,
+ 	return sprdwl_change_beacon(vif, beacon);
+ }
+ 
+-static int sprdwl_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev)
++static int sprdwl_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev, unsigned int link_id)
+ {
+ #ifdef DFS_MASTER
+ 	struct sprdwl_vif *vif = netdev_priv(ndev);
+@@ -2367,7 +2367,7 @@ void sprdwl_report_connection(struct sprdwl_vif *vif,
+ 		 conn_info->status == SPRDWL_ROAM_SUCCESS){
+ #if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 14, 0)
+ 		struct cfg80211_roam_info roam_info = {
+-			.bss = bss,
++			.links[0].bss = bss,
+ 			.req_ie = conn_info->req_ie,
+ 			.req_ie_len = conn_info->req_ie_len,
+ 			.resp_ie = conn_info->resp_ie,
+diff --git a/drivers/net/wireless/uwe5622/unisocwifi/cmdevt.c b/drivers/net/wireless/uwe5622/unisocwifi/cmdevt.c
+index e81619b12e39..1ecbfac5b490 100644
+--- a/drivers/net/wireless/uwe5622/unisocwifi/cmdevt.c
++++ b/drivers/net/wireless/uwe5622/unisocwifi/cmdevt.c
+@@ -3296,7 +3296,7 @@ void sprdwl_event_chan_changed(struct sprdwl_vif *vif, u8 *data, u16 len)
+ 						NL80211_CHAN_HT20);
+ 		else
+ 			wl_err("%s, ch is null!\n", __func__);
+-		cfg80211_ch_switch_notify(vif->ndev, &chandef);
++		cfg80211_ch_switch_notify(vif->ndev, &chandef, 0);
+ 	}
+ }
+ 
+-- 
+2.34.1
+

recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0005-drv-fix-setting-mac-address-for-netdev-in-uwe5622.patch

@@ -0,0 +1,35 @@
+From 9211a92d07e9a43fce104f87f9d45e890257b699 Mon Sep 17 00:00:00 2001
+From: pbiel <pbiel7@gmail.com>
+Date: Tue, 7 Mar 2023 20:28:44 +0100
+Subject: [PATCH] wireless: fix setting mac address for netdev in uwe5622
+ unisocwifi driver
+
+---
+ drivers/net/wireless/uwe5622/unisocwifi/main.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/net/wireless/uwe5622/unisocwifi/main.c b/drivers/net/wireless/uwe5622/unisocwifi/main.c
+index 21efdf4e0..566a9a7f3 100644
+--- a/drivers/net/wireless/uwe5622/unisocwifi/main.c
++++ b/drivers/net/wireless/uwe5622/unisocwifi/main.c
+@@ -1356,6 +1356,7 @@ static struct sprdwl_vif *sprdwl_register_netdev(struct sprdwl_priv *priv,
+ 	struct wireless_dev *wdev;
+ 	struct sprdwl_vif *vif;
+ 	int ret;
++	u8 target_mac_addr[ETH_ALEN] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+ 
+ #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 17, 0))
+ 	ndev = alloc_netdev(sizeof(*vif), name, NET_NAME_UNKNOWN, ether_setup);
+@@ -1411,7 +1412,8 @@ static struct sprdwl_vif *sprdwl_register_netdev(struct sprdwl_priv *priv,
+ 	ndev->features |= NETIF_F_SG;
+ 	SET_NETDEV_DEV(ndev, wiphy_dev(priv->wiphy));
+ 
+-	sprdwl_set_mac_addr(vif, addr, ndev->dev_addr);
++	sprdwl_set_mac_addr(vif, addr, target_mac_addr);
++	dev_addr_set(ndev, target_mac_addr);
+ 
+ #ifdef CONFIG_P2P_INTF
+ 	if (type == NL80211_IFTYPE_P2P_DEVICE)
+-- 
+2.34.1
+

recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0007-drv-add-sunxi_get_soc_chipid-and-sunxi_get_serial.patch

@@ -0,0 +1,60 @@
+From 452a691a83df1aab77cec33203cb04a817817a05 Mon Sep 17 00:00:00 2001
+From: The-going <48602507+The-going@users.noreply.github.com>
+Date: Thu, 5 May 2022 22:55:13 +0300
+Subject: [PATCH] drv: nvmem: sunxi_sid: Add sunxi_get_soc_chipid,
+ sunxi_get_serial
+
+---
+ drivers/nvmem/sunxi_sid.c | 28 ++++++++++++++++++++++++++++
+ 1 file changed, 28 insertions(+)
+
+diff --git a/drivers/nvmem/sunxi_sid.c b/drivers/nvmem/sunxi_sid.c
+index 37a6abb0e..c81fac63d 100644
+--- a/drivers/nvmem/sunxi_sid.c
++++ b/drivers/nvmem/sunxi_sid.c
+@@ -37,6 +37,25 @@ struct sunxi_sid {
+ 	u32			value_offset;
+ };
+ 
++static unsigned int sunxi_soc_chipid[4];
++static unsigned int sunxi_serial[4];
++
++int sunxi_get_soc_chipid(unsigned char *chipid)
++{
++	memcpy(chipid, sunxi_soc_chipid, 16);
++
++	return 0;
++}
++EXPORT_SYMBOL(sunxi_get_soc_chipid);
++
++int sunxi_get_serial(unsigned       char *serial)
++{
++	memcpy(serial, sunxi_serial, 16);
++
++	return 0;
++}
++EXPORT_SYMBOL(sunxi_get_serial);
++
+ static int sunxi_sid_read(void *context, unsigned int offset,
+ 			  void *val, size_t bytes)
+ {
+@@ -167,6 +186,15 @@ static int sunxi_sid_probe(struct platform_device *pdev)
+ 
+ 	platform_set_drvdata(pdev, nvmem);
+ 
++	nvmem_cfg->reg_read(sid, 0, &sunxi_soc_chipid[0], sizeof(int));
++	nvmem_cfg->reg_read(sid, 4, &sunxi_soc_chipid[1], sizeof(int));
++	nvmem_cfg->reg_read(sid, 8, &sunxi_soc_chipid[2], sizeof(int));
++	nvmem_cfg->reg_read(sid, 12, &sunxi_soc_chipid[3], sizeof(int));
++
++	sunxi_serial[0] = sunxi_soc_chipid[3];
++	sunxi_serial[1] = sunxi_soc_chipid[2];
++	sunxi_serial[2] = (sunxi_soc_chipid[1] >> 16) & 0x0ffff;
++
+ 	return 0;
+ }
+ 
+-- 
+2.35.3
+
+

recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0008-drv-add-sunxi-addr-driver.patch

@@ -0,0 +1,612 @@
+From 418436514e2e64e07e7fd2ef9d77ec4712d1033b Mon Sep 17 00:00:00 2001
+From: pbiel <pbiel7@gmail.com>
+Date: Fri, 24 Feb 2023 10:38:03 +0100
+Subject: [PATCH 2/2] Add sunxi addr driver
+
+---
+ drivers/misc/Kconfig                 |   1 +
+ drivers/misc/Makefile                |   1 +
+ drivers/misc/sunxi-addr/Kconfig      |   6 +
+ drivers/misc/sunxi-addr/Makefile     |   5 +
+ drivers/misc/sunxi-addr/sha256.c     | 178 +++++++++++++
+ drivers/misc/sunxi-addr/sunxi-addr.c | 358 +++++++++++++++++++++++++++
+ 6 files changed, 549 insertions(+)
+ create mode 100644 drivers/misc/sunxi-addr/Kconfig
+ create mode 100644 drivers/misc/sunxi-addr/Makefile
+ create mode 100644 drivers/misc/sunxi-addr/sha256.c
+ create mode 100644 drivers/misc/sunxi-addr/sunxi-addr.c
+
+diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
+index 358ad56f6..c59480dc8 100644
+--- a/drivers/misc/Kconfig
++++ b/drivers/misc/Kconfig
+@@ -514,4 +514,5 @@ source "drivers/misc/habanalabs/Kconfig"
+ source "drivers/misc/uacce/Kconfig"
+ source "drivers/misc/pvpanic/Kconfig"
+ source "drivers/misc/mchp_pci1xxxx/Kconfig"
++source "drivers/misc/sunxi-addr/Kconfig"
+ endmenu
+diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
+index ac9b3e757..487a2bf2d 100644
+--- a/drivers/misc/Makefile
++++ b/drivers/misc/Makefile
+@@ -62,3 +62,4 @@ obj-$(CONFIG_HI6421V600_IRQ)	+= hi6421v600-irq.o
+ obj-$(CONFIG_OPEN_DICE)		+= open-dice.o
+ obj-$(CONFIG_GP_PCI1XXXX)	+= mchp_pci1xxxx/
+ obj-$(CONFIG_VCPU_STALL_DETECTOR)	+= vcpu_stall_detector.o
++obj-$(CONFIG_SUNXI_ADDR_MGT)    += sunxi-addr/
+\ No newline at end of file
+diff --git a/drivers/misc/sunxi-addr/Kconfig b/drivers/misc/sunxi-addr/Kconfig
+new file mode 100644
+index 000000000..801dd2c02
+--- /dev/null
++++ b/drivers/misc/sunxi-addr/Kconfig
+@@ -0,0 +1,6 @@
++config SUNXI_ADDR_MGT
++  tristate "Allwinner Network MAC Addess Manager"
++  depends on BT || ETHERNET || WLAN
++  depends on NVMEM_SUNXI_SID
++  help
++    allwinner network mac address management
+diff --git a/drivers/misc/sunxi-addr/Makefile b/drivers/misc/sunxi-addr/Makefile
+new file mode 100644
+index 000000000..f01fd4783
+--- /dev/null
++++ b/drivers/misc/sunxi-addr/Makefile
+@@ -0,0 +1,5 @@
++#
++# Makefile for wifi mac addr manager drivers
++#
++sunxi_addr-objs := sunxi-addr.o sha256.o
++obj-$(CONFIG_SUNXI_ADDR_MGT)   += sunxi_addr.o
+diff --git a/drivers/misc/sunxi-addr/sha256.c b/drivers/misc/sunxi-addr/sha256.c
+new file mode 100644
+index 000000000..78825810c
+--- /dev/null
++++ b/drivers/misc/sunxi-addr/sha256.c
+@@ -0,0 +1,178 @@
++/*
++ * Local implement of sha256.
++ *
++ * Copyright (C) 2013 Allwinner.
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2.  This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++#include <linux/kernel.h>
++#include <linux/string.h>
++
++/****************************** MACROS ******************************/
++#define ROTRIGHT(a, b) (((a) >> (b)) | ((a) << (32 - (b))))
++#define CH(x, y, z)    (((x) & (y)) ^ (~(x) & (z)))
++#define MAJ(x, y, z)   (((x) & (y)) ^  ((x) & (z)) ^ ((y) & (z)))
++#define EP0(x)         (ROTRIGHT(x,  2) ^ ROTRIGHT(x, 13) ^ ROTRIGHT(x, 22))
++#define EP1(x)         (ROTRIGHT(x,  6) ^ ROTRIGHT(x, 11) ^ ROTRIGHT(x, 25))
++#define SIG0(x)        (ROTRIGHT(x,  7) ^ ROTRIGHT(x, 18) ^ ((x) >> 3))
++#define SIG1(x)        (ROTRIGHT(x, 17) ^ ROTRIGHT(x, 19) ^ ((x) >> 10))
++
++/**************************** VARIABLES *****************************/
++static const uint32_t k[64] = {
++	0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5,
++	0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5,
++	0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3,
++	0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174,
++	0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc,
++	0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da,
++	0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7,
++	0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967,
++	0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13,
++	0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85,
++	0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3,
++	0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070,
++	0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5,
++	0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3,
++	0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208,
++	0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2
++};
++
++struct sha256_ctx {
++	uint8_t data[64];   /* current 512-bit chunk of message data, just like a buffer */
++	uint32_t datalen;   /* sign the data length of current chunk */
++	uint64_t bitlen;    /* the bit length of the total message */
++	uint32_t state[8];  /* store the middle state of hash abstract */
++};
++
++/*********************** FUNCTION DEFINITIONS ***********************/
++static void sha256_transform(struct sha256_ctx *ctx, const uint8_t *data)
++{
++	uint32_t a, b, c, d, e, f, g, h, i, j, t1, t2, m[64];
++
++	/* initialization */
++	for (i = 0, j = 0; i < 16; ++i, j += 4)
++		m[i] = (data[j] << 24) | (data[j + 1] << 16) |
++			(data[j + 2] << 8) | (data[j + 3]);
++	for ( ; i < 64; ++i)
++		m[i] = SIG1(m[i - 2]) + m[i - 7] + SIG0(m[i - 15]) + m[i - 16];
++
++	a = ctx->state[0];
++	b = ctx->state[1];
++	c = ctx->state[2];
++	d = ctx->state[3];
++	e = ctx->state[4];
++	f = ctx->state[5];
++	g = ctx->state[6];
++	h = ctx->state[7];
++
++	for (i = 0; i < 64; ++i) {
++		t1 = h + EP1(e) + CH(e, f, g) + k[i] + m[i];
++		t2 = EP0(a) + MAJ(a, b, c);
++		h = g;
++		g = f;
++		f = e;
++		e = d + t1;
++		d = c;
++		c = b;
++		b = a;
++		a = t1 + t2;
++	}
++
++	ctx->state[0] += a;
++	ctx->state[1] += b;
++	ctx->state[2] += c;
++	ctx->state[3] += d;
++	ctx->state[4] += e;
++	ctx->state[5] += f;
++	ctx->state[6] += g;
++	ctx->state[7] += h;
++}
++
++static void sha256_init(struct sha256_ctx *ctx)
++{
++	ctx->datalen = 0;
++	ctx->bitlen = 0;
++	ctx->state[0] = 0x6a09e667;
++	ctx->state[1] = 0xbb67ae85;
++	ctx->state[2] = 0x3c6ef372;
++	ctx->state[3] = 0xa54ff53a;
++	ctx->state[4] = 0x510e527f;
++	ctx->state[5] = 0x9b05688c;
++	ctx->state[6] = 0x1f83d9ab;
++	ctx->state[7] = 0x5be0cd19;
++}
++
++static void sha256_update(struct sha256_ctx *ctx, const uint8_t *data, size_t len)
++{
++	uint32_t i;
++
++	for (i = 0; i < len; ++i) {
++		ctx->data[ctx->datalen] = data[i];
++		ctx->datalen++;
++		if (ctx->datalen == 64) {
++			/* 64 byte = 512 bit  means the buffer ctx->data has
++			 * fully stored one chunk of message,
++			 * so do the sha256 hash map for the current chunk.
++			 */
++			sha256_transform(ctx, ctx->data);
++			ctx->bitlen += 512;
++			ctx->datalen = 0;
++		}
++	}
++}
++
++static void sha256_final(struct sha256_ctx *ctx, uint8_t *hash)
++{
++	uint32_t i;
++
++	i = ctx->datalen;
++
++	/* Pad whatever data is left in the buffer. */
++	if (ctx->datalen < 56) {
++		ctx->data[i++] = 0x80;  /* pad 10000000 = 0x80 */
++		while (i < 56)
++			ctx->data[i++] = 0x00;
++	} else {
++		ctx->data[i++] = 0x80;
++		while (i < 64)
++			ctx->data[i++] = 0x00;
++		sha256_transform(ctx, ctx->data);
++		memset(ctx->data, 0, 56);
++	}
++
++	/* Append to the padding the total message's length in bits and transform. */
++	ctx->bitlen += ctx->datalen * 8;
++	ctx->data[63] = ctx->bitlen;
++	ctx->data[62] = ctx->bitlen >> 8;
++	ctx->data[61] = ctx->bitlen >> 16;
++	ctx->data[60] = ctx->bitlen >> 24;
++	ctx->data[59] = ctx->bitlen >> 32;
++	ctx->data[58] = ctx->bitlen >> 40;
++	ctx->data[57] = ctx->bitlen >> 48;
++	ctx->data[56] = ctx->bitlen >> 56;
++	sha256_transform(ctx, ctx->data);
++
++	/* copying the final state to the output hash(use big endian). */
++	for (i = 0; i < 4; ++i) {
++		hash[i]      = (ctx->state[0] >> (24 - i * 8)) & 0x000000ff;
++		hash[i + 4]  = (ctx->state[1] >> (24 - i * 8)) & 0x000000ff;
++		hash[i + 8]  = (ctx->state[2] >> (24 - i * 8)) & 0x000000ff;
++		hash[i + 12] = (ctx->state[3] >> (24 - i * 8)) & 0x000000ff;
++		hash[i + 16] = (ctx->state[4] >> (24 - i * 8)) & 0x000000ff;
++		hash[i + 20] = (ctx->state[5] >> (24 - i * 8)) & 0x000000ff;
++		hash[i + 24] = (ctx->state[6] >> (24 - i * 8)) & 0x000000ff;
++		hash[i + 28] = (ctx->state[7] >> (24 - i * 8)) & 0x000000ff;
++	}
++}
++
++int hmac_sha256(const uint8_t *plaintext, ssize_t psize, uint8_t *output)
++{
++	struct sha256_ctx ctx;
++
++	sha256_init(&ctx);
++	sha256_update(&ctx, plaintext, psize);
++	sha256_final(&ctx, output);
++	return 0;
++}
+diff --git a/drivers/misc/sunxi-addr/sunxi-addr.c b/drivers/misc/sunxi-addr/sunxi-addr.c
+new file mode 100644
+index 000000000..a812e4e82
+--- /dev/null
++++ b/drivers/misc/sunxi-addr/sunxi-addr.c
+@@ -0,0 +1,358 @@
++/*
++ * The driver of SUNXI NET MAC ADDR Manager.
++ *
++ * Copyright (C) 2013 Allwinner.
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2.  This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++#define DEBUG
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/miscdevice.h>
++#include <linux/of.h>
++#include <linux/platform_device.h>
++
++#define ADDR_MGT_DBG(fmt, arg...) printk(KERN_DEBUG "[ADDR_MGT] %s: " fmt "\n",\
++				__func__, ## arg)
++#define ADDR_MGT_ERR(fmt, arg...) printk(KERN_ERR "[ADDR_MGT] %s: " fmt "\n",\
++				__func__, ## arg)
++
++#define MODULE_CUR_VERSION  "v1.0.9"
++
++#define MATCH_STR_LEN       20
++#define ADDR_VAL_LEN        6
++#define ADDR_STR_LEN        18
++#define ID_LEN              16
++#define HASH_LEN            32
++
++#define TYPE_ANY            0
++#define TYPE_BURN           1
++#define TYPE_IDGEN          2
++#define TYPE_USER           3
++#define TYPE_RAND           4
++
++#define ADDR_FMT_STR        0
++#define ADDR_FMT_VAL        1
++
++#define IS_TYPE_INVALID(x)  ((x < TYPE_ANY) || (x > TYPE_RAND))
++
++#define ADDR_CLASS_ATTR_ADD(name) \
++static ssize_t addr_##name##_show(struct class *class, \
++		struct class_attribute *attr, char *buffer) \
++{ \
++	char addr[ADDR_STR_LEN]; \
++	if (IS_TYPE_INVALID(get_addr_by_name(ADDR_FMT_STR, addr, #name))) \
++		return 0; \
++	return sprintf(buffer, "%.17s\n", addr); \
++} \
++static ssize_t addr_##name##_store(struct class *class, \
++		struct class_attribute *attr, \
++		const char *buffer, size_t count) \
++{ \
++	if (count != ADDR_STR_LEN) { \
++		ADDR_MGT_ERR("Length wrong."); \
++		return -EINVAL; \
++	} \
++	set_addr_by_name(TYPE_USER, ADDR_FMT_STR, buffer, #name); \
++	return count; \
++} \
++static CLASS_ATTR_RW(addr_##name);
++
++struct addr_mgt_info {
++	unsigned int type_def;
++	unsigned int type_cur;
++	unsigned int flag;
++	char *addr;
++	char *name;
++};
++
++static struct addr_mgt_info info[] = {
++	{TYPE_ANY, TYPE_ANY, 1, NULL, "wifi"},
++	{TYPE_ANY, TYPE_ANY, 0, NULL, "bt"  },
++	{TYPE_ANY, TYPE_ANY, 1, NULL, "eth" },
++};
++
++extern int hmac_sha256(const uint8_t *plaintext, ssize_t psize, uint8_t *output);
++extern int sunxi_get_soc_chipid(unsigned char *chipid);
++
++static int addr_parse(int fmt, const char *addr, int check)
++{
++	char val_buf[ADDR_VAL_LEN];
++	char cmp_buf[ADDR_VAL_LEN];
++	int  ret = ADDR_VAL_LEN;
++
++	if (fmt == ADDR_FMT_STR)
++		ret = sscanf(addr, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
++					&val_buf[0], &val_buf[1], &val_buf[2],
++					&val_buf[3], &val_buf[4], &val_buf[5]);
++	else
++		memcpy(val_buf, addr, ADDR_VAL_LEN);
++
++	if (ret != ADDR_VAL_LEN)
++		return -1;
++
++	if (check && (val_buf[0] & 0x3))
++		return -1;
++
++	memset(cmp_buf, 0x00, ADDR_VAL_LEN);
++	if (memcmp(val_buf, cmp_buf, ADDR_VAL_LEN) == 0)
++		return -1;
++
++	memset(cmp_buf, 0xFF, ADDR_VAL_LEN);
++	if (memcmp(val_buf, cmp_buf, ADDR_VAL_LEN) == 0)
++		return -1;
++
++	return 0;
++}
++
++static struct addr_mgt_info *addr_find_by_name(char *name)
++{
++	int i = 0;
++	for (i = 0; i < ARRAY_SIZE(info); i++) {
++		if (strcmp(info[i].name, name) == 0)
++			return &info[i];
++	}
++	return NULL;
++}
++
++static int get_addr_by_name(int fmt, char *addr, char *name)
++{
++	struct addr_mgt_info *t;
++
++	t = addr_find_by_name(name);
++	if (t == NULL) {
++		ADDR_MGT_ERR("can't find addr named: %s", name);
++		return -1;
++	}
++
++	if (IS_TYPE_INVALID(t->type_cur)) {
++		ADDR_MGT_ERR("addr type invalid");
++		return -1;
++	}
++
++	if (addr_parse(ADDR_FMT_VAL, t->addr, t->flag)) {
++		ADDR_MGT_ERR("addr parse fail(%s)", t->addr);
++		return -1;
++	}
++
++	if (fmt == ADDR_FMT_STR)
++		sprintf(addr, "%02X:%02X:%02X:%02X:%02X:%02X",
++				t->addr[0], t->addr[1], t->addr[2],
++				t->addr[3], t->addr[4], t->addr[5]);
++	else
++		memcpy(addr, t->addr, ADDR_VAL_LEN);
++
++	return t->type_cur;
++}
++
++static int set_addr_by_name(int type, int fmt, const char *addr, char *name)
++{
++	struct addr_mgt_info *t;
++
++	t = addr_find_by_name(name);
++	if (t == NULL) {
++		ADDR_MGT_ERR("can't find addr named: %s", name);
++		return -1;
++	}
++
++	if (addr_parse(fmt, addr, t->flag)) {
++		ADDR_MGT_ERR("addr parse fail(%s)", addr);
++		return -1;
++	}
++
++	t->type_cur = type;
++	if (fmt == ADDR_FMT_STR)
++		sscanf(addr, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
++				&t->addr[0], &t->addr[1], &t->addr[2],
++				&t->addr[3], &t->addr[4], &t->addr[5]);
++	else
++		memcpy(t->addr, addr, ADDR_VAL_LEN);
++
++	return 0;
++}
++
++int get_custom_mac_address(int fmt, char *name, char *addr)
++{
++	return get_addr_by_name(fmt, addr, name);
++}
++EXPORT_SYMBOL_GPL(get_custom_mac_address);
++
++static int addr_factory(struct device_node *np,
++			int idx, int type, char *mac, char *name)
++{
++	int  ret, i;
++	char match[MATCH_STR_LEN];
++	const char *p;
++	char id[ID_LEN], hash[HASH_LEN], cmp_buf[ID_LEN];
++	struct timespec64 curtime;
++
++	switch (type) {
++	case TYPE_BURN:
++		sprintf(match, "addr_%s", name);
++		ret = of_property_read_string_index(np, match, 0, &p);
++		if (ret)
++			return -1;
++
++		ret = sscanf(p, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
++			&mac[0], &mac[1], &mac[2],
++			&mac[3], &mac[4], &mac[5]);
++
++		if (ret != ADDR_VAL_LEN)
++			return -1;
++		break;
++	case TYPE_IDGEN:
++		if (idx > HASH_LEN / ADDR_VAL_LEN - 1)
++			return -1;
++		if (sunxi_get_soc_chipid(id))
++			return -1;
++		memset(cmp_buf, 0x00, ID_LEN);
++		if (memcmp(id, cmp_buf, ID_LEN) == 0)
++			return -1;
++		if (hmac_sha256(id, ID_LEN, hash))
++			return -1;
++		memcpy(mac, &hash[idx * ADDR_VAL_LEN], ADDR_VAL_LEN);
++		break;
++	case TYPE_RAND:
++		for (i = 0; i < ADDR_VAL_LEN; i++) {
++			ktime_get_real_ts64(&curtime);
++			mac[i] = (char)curtime.tv_nsec;
++		}
++		break;
++	default:
++		ADDR_MGT_ERR("unsupport type: %d", type);
++		return -1;
++	}
++	return 0;
++}
++
++static int addr_init(struct platform_device *pdev)
++{
++	struct device_node *np = pdev->dev.of_node;
++	int  type, i, j;
++	char match[MATCH_STR_LEN];
++	char addr[ADDR_VAL_LEN];
++	int  type_tab[] = {TYPE_BURN, TYPE_IDGEN, TYPE_RAND};
++
++	/* init addr type and value */
++	for (i = 0; i < ARRAY_SIZE(info); i++) {
++		sprintf(match, "type_addr_%s", info[i].name);
++		if (of_property_read_u32(np, match, &type)) {
++			ADDR_MGT_DBG("Failed to get type_def_%s, use default: %d",
++						info[i].name, info[i].type_def);
++		} else {
++			info[i].type_def = type;
++			info[i].type_cur = type;
++		}
++
++		if (IS_TYPE_INVALID(info[i].type_def))
++			return -1;
++		if (info[i].type_def != TYPE_ANY) {
++			if (addr_factory(np, i, info[i].type_def, addr, info[i].name))
++				return -1;
++		} else {
++			for (j = 0; j < ARRAY_SIZE(type_tab); j++) {
++				if (!addr_factory(np, i, type_tab[j], addr, info[i].name)) {
++					info[i].type_cur = type_tab[j];
++					break;
++				}
++			}
++		}
++
++		if (info[i].flag)
++			addr[0] &= 0xFC;
++
++		if (addr_parse(ADDR_FMT_VAL, addr, info[i].flag))
++			return -1;
++		else {
++			info[i].addr = devm_kzalloc(&pdev->dev, ADDR_VAL_LEN, GFP_KERNEL);
++			memcpy(info[i].addr, addr, ADDR_VAL_LEN);
++		}
++	}
++	return 0;
++}
++
++static ssize_t summary_show(struct class *class,
++				struct class_attribute *attr, char *buffer)
++{
++	int i = 0, ret = 0;
++
++	ret += sprintf(&buffer[ret], "name cfg cur address\n");
++	for (i = 0; i < ARRAY_SIZE(info); i++) {
++		ret += sprintf(&buffer[ret],
++			"%4s  %d   %d  %02X:%02X:%02X:%02X:%02X:%02X\n",
++			info[i].name,   info[i].type_def, info[i].type_cur,
++			info[i].addr[0], info[i].addr[1], info[i].addr[2],
++			info[i].addr[3], info[i].addr[4], info[i].addr[5]);
++	}
++	return ret;
++}
++static CLASS_ATTR_RO(summary);
++
++ADDR_CLASS_ATTR_ADD(wifi);
++ADDR_CLASS_ATTR_ADD(bt);
++ADDR_CLASS_ATTR_ADD(eth);
++
++static struct attribute *addr_class_attrs[] = {
++	&class_attr_summary.attr,
++	&class_attr_addr_wifi.attr,
++	&class_attr_addr_bt.attr,
++	&class_attr_addr_eth.attr,
++	NULL
++};
++ATTRIBUTE_GROUPS(addr_class);
++
++static struct class addr_class = {
++	.name = "addr_mgt",
++	.owner = THIS_MODULE,
++	.class_groups = addr_class_groups,
++};
++
++static const struct of_device_id addr_mgt_ids[] = {
++	{ .compatible = "allwinner,sunxi-addr_mgt" },
++	{ /* Sentinel */ }
++};
++
++static int addr_mgt_probe(struct platform_device *pdev)
++{
++	int status;
++
++	ADDR_MGT_DBG("module version: %s", MODULE_CUR_VERSION);
++	status = class_register(&addr_class);
++	if (status < 0) {
++		ADDR_MGT_ERR("class register error, status: %d.", status);
++		return -1;
++	}
++
++	if (addr_init(pdev)) {
++		ADDR_MGT_ERR("failed to init addr.");
++		class_unregister(&addr_class);
++		return -1;
++	}
++	ADDR_MGT_DBG("success.");
++	return 0;
++}
++
++static int addr_mgt_remove(struct platform_device *pdev)
++{
++	class_unregister(&addr_class);
++	return 0;
++}
++
++static struct platform_driver addr_mgt_driver = {
++	.probe  = addr_mgt_probe,
++	.remove = addr_mgt_remove,
++	.driver = {
++		.owner = THIS_MODULE,
++		.name  = "sunxi-addr-mgt",
++		.of_match_table = addr_mgt_ids,
++	},
++};
++
++module_platform_driver_probe(addr_mgt_driver, addr_mgt_probe);
++
++MODULE_AUTHOR("Allwinnertech");
++MODULE_DESCRIPTION("Network MAC Addess Manager");
++MODULE_LICENSE("GPL");
+-- 
+2.34.1
+

recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0009-dts-add-addr_mgt-device-tree-node.patch

@@ -0,0 +1,32 @@
+From 706dc6ed092e4a1b9d84893cb4186fbd354bb1c8 Mon Sep 17 00:00:00 2001
+From: pbiel <pbiel7@gmail.com>
+Date: Thu, 26 Jan 2023 09:51:22 +0100
+Subject: [PATCH] Add addr_mgt device tree node
+
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+index d0b95d43a..15f45a3f9 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+@@ -591,5 +591,15 @@ sunxi-info {
+ 			compatible = "allwinner,sun50i-h616-sys-info";
+ 			status = "okay";
+ 		};
++
++		addr_mgt {
++			compatible = "allwinner,sunxi-addr_mgt";
++			type_addr_wifi = <0x00>;
++			type_addr_bt = <0x00>;
++			type_addr_eth = <0x00>;
++			status = "okay";
++			linux,phandle = <0x179>;
++			phandle = <0x179>;
++		};
+ 	};
+ };
+-- 
+2.34.1
+

recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0010-dts-add-wifi-power-regulator.patch

@@ -0,0 +1,70 @@
+From 899da8366afd97b1ca59b632036dc313777026da Mon Sep 17 00:00:00 2001
+From: pbiel <pbiel7@gmail.com>
+Date: Fri, 24 Feb 2023 22:14:58 +0100
+Subject: [PATCH] Add wifi power regulator
+
+---
+ .../allwinner/sun50i-h616-orangepi-zero2.dts  | 47 +++++++++++++++++++
+ 1 file changed, 47 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+index 02893f3ac..88234a139 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+@@ -49,6 +49,53 @@ reg_vcc5v: vcc5v {
+ 		regulator-max-microvolt = <5000000>;
+ 		regulator-always-on;
+ 	};
++
++	reg_vcc33_wifi: vcc33-wifi {
++		/* Always on 3.3V regulator for WiFi and BT */
++		compatible = "regulator-fixed";
++		regulator-name = "vcc33-wifi";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		regulator-always-on;
++		vin-supply = <&reg_vcc5v>;
++	};
++
++	reg_vcc_wifi_io: vcc-wifi-io {
++		/* Always on 1.8V/300mA regulator for WiFi and BT IO */
++		compatible = "regulator-fixed";
++		regulator-name = "vcc-wifi-io";
++		regulator-min-microvolt = <1800000>;
++		regulator-max-microvolt = <1800000>;
++		regulator-always-on;
++		vin-supply = <&reg_vcc33_wifi>;
++	};
++
++	wifi_pwrseq: wifi-pwrseq {
++		compatible = "mmc-pwrseq-simple";
++		clocks = <&rtc 1>;
++		clock-names = "osc32k-out";
++		reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
++		post-power-on-delay-ms = <200>;
++	};
++};
++
++&mmc1 {
++	vmmc-supply = <&reg_vcc33_wifi>;
++	vqmmc-supply = <&reg_vcc_wifi_io>;
++	mmc-pwrseq = <&wifi_pwrseq>;
++	bus-width = <4>;
++	non-removable;
++	mmc-ddr-1_8v;
++	status = "okay";
++	uwe-bsp {
++		compatible = "unisoc,uwe_bsp";
++		keep-power-on;
++		data-irq;
++		//adma-tx;
++		adma-rx;
++		//blksz-512;
++		status = "okay";
++	};
+ };
+ 
+ &emac0 {
+-- 
+2.34.1
+

recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0011-dts-add-usb-to-h616.patch

@@ -0,0 +1,184 @@
+From ab35c98369d50766eb20920a93a2dca927935481 Mon Sep 17 00:00:00 2001
+From: OpenEmbedded <oe.patch@oe>
+Date: Fri, 19 May 2023 23:01:14 +0200
+Subject: [PATCH] Add usb support to h616. This is not needed from kernel 6.2
+
+Signed-off-by: OpenEmbedded <oe.patch@oe>
+---
+ .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 160 ++++++++++++++++++
+ 1 file changed, 160 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+index 04cdec7e2..a1d872e74 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+@@ -504,6 +504,166 @@ mdio0: mdio {
+ 			};
+ 		};
+ 
++		usbotg: usb@5100000 {
++			compatible = "allwinner,sun50i-h616-musb",
++				     "allwinner,sun8i-h3-musb";
++			reg = <0x05100000 0x0400>;
++			clocks = <&ccu CLK_BUS_OTG>;
++			resets = <&ccu RST_BUS_OTG>;
++			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
++			interrupt-names = "mc";
++			phys = <&usbphy 0>;
++			phy-names = "usb";
++			extcon = <&usbphy 0>;
++			status = "disabled";
++		};
++
++		usbphy: phy@5100400 {
++			compatible = "allwinner,sun50i-h616-usb-phy";
++			reg = <0x05100400 0x24>,
++			      <0x05101800 0x14>,
++			      <0x05200800 0x14>,
++			      <0x05310800 0x14>,
++			      <0x05311800 0x14>;
++			reg-names = "phy_ctrl",
++				    "pmu0",
++				    "pmu1",
++				    "pmu2",
++				    "pmu3";
++			clocks = <&ccu CLK_USB_PHY0>,
++				 <&ccu CLK_USB_PHY1>,
++				 <&ccu CLK_USB_PHY2>,
++				 <&ccu CLK_USB_PHY3>,
++				 <&ccu CLK_BUS_EHCI2>;
++			clock-names = "usb0_phy",
++				      "usb1_phy",
++				      "usb2_phy",
++				      "usb3_phy",
++				      "pmu2_clk";
++			resets = <&ccu RST_USB_PHY0>,
++				 <&ccu RST_USB_PHY1>,
++				 <&ccu RST_USB_PHY2>,
++				 <&ccu RST_USB_PHY3>;
++			reset-names = "usb0_reset",
++				      "usb1_reset",
++				      "usb2_reset",
++				      "usb3_reset";
++			status = "disabled";
++			#phy-cells = <1>;
++		};
++
++		ehci0: usb@5101000 {
++			compatible = "allwinner,sun50i-h616-ehci",
++				     "generic-ehci";
++			reg = <0x05101000 0x100>;
++			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
++			clocks = <&ccu CLK_BUS_OHCI0>,
++				 <&ccu CLK_BUS_EHCI0>,
++				 <&ccu CLK_USB_OHCI0>;
++			resets = <&ccu RST_BUS_OHCI0>,
++				 <&ccu RST_BUS_EHCI0>;
++			phys = <&usbphy 0>;
++			phy-names = "usb";
++			status = "disabled";
++		};
++
++		ohci0: usb@5101400 {
++			compatible = "allwinner,sun50i-h616-ohci",
++				     "generic-ohci";
++			reg = <0x05101400 0x100>;
++			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
++			clocks = <&ccu CLK_BUS_OHCI0>,
++				 <&ccu CLK_USB_OHCI0>;
++			resets = <&ccu RST_BUS_OHCI0>;
++			phys = <&usbphy 0>;
++			phy-names = "usb";
++			status = "disabled";
++		};
++
++		ehci1: usb@5200000 {
++			compatible = "allwinner,sun50i-h616-ehci",
++				     "generic-ehci";
++			reg = <0x05200000 0x100>;
++			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
++			clocks = <&ccu CLK_BUS_OHCI1>,
++				 <&ccu CLK_BUS_EHCI1>,
++				 <&ccu CLK_USB_OHCI1>;
++			resets = <&ccu RST_BUS_OHCI1>,
++				 <&ccu RST_BUS_EHCI1>;
++			phys = <&usbphy 1>;
++			phy-names = "usb";
++			status = "disabled";
++		};
++
++		ohci1: usb@5200400 {
++			compatible = "allwinner,sun50i-h616-ohci",
++				     "generic-ohci";
++			reg = <0x05200400 0x100>;
++			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
++			clocks = <&ccu CLK_BUS_OHCI1>,
++				 <&ccu CLK_USB_OHCI1>;
++			resets = <&ccu RST_BUS_OHCI1>;
++			phys = <&usbphy 1>;
++			phy-names = "usb";
++			status = "disabled";
++		};
++
++		ehci2: usb@5310000 {
++			compatible = "allwinner,sun50i-h616-ehci",
++				     "generic-ehci";
++			reg = <0x05310000 0x100>;
++			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
++			clocks = <&ccu CLK_BUS_OHCI2>,
++				 <&ccu CLK_BUS_EHCI2>,
++				 <&ccu CLK_USB_OHCI2>;
++			resets = <&ccu RST_BUS_OHCI2>,
++				 <&ccu RST_BUS_EHCI2>;
++			phys = <&usbphy 2>;
++			phy-names = "usb";
++			status = "disabled";
++		};
++
++		ohci2: usb@5310400 {
++			compatible = "allwinner,sun50i-h616-ohci",
++				     "generic-ohci";
++			reg = <0x05310400 0x100>;
++			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
++			clocks = <&ccu CLK_BUS_OHCI2>,
++				 <&ccu CLK_USB_OHCI2>;
++			resets = <&ccu RST_BUS_OHCI2>;
++			phys = <&usbphy 2>;
++			phy-names = "usb";
++			status = "disabled";
++		};
++
++		ehci3: usb@5311000 {
++			compatible = "allwinner,sun50i-h616-ehci",
++				     "generic-ehci";
++			reg = <0x05311000 0x100>;
++			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
++			clocks = <&ccu CLK_BUS_OHCI3>,
++				 <&ccu CLK_BUS_EHCI3>,
++				 <&ccu CLK_USB_OHCI3>;
++			resets = <&ccu RST_BUS_OHCI3>,
++				 <&ccu RST_BUS_EHCI3>;
++			phys = <&usbphy 3>;
++			phy-names = "usb";
++			status = "disabled";
++		};
++
++		ohci3: usb@5311400 {
++			compatible = "allwinner,sun50i-h616-ohci",
++				     "generic-ohci";
++			reg = <0x05311400 0x100>;
++			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
++			clocks = <&ccu CLK_BUS_OHCI3>,
++				 <&ccu CLK_USB_OHCI3>;
++			resets = <&ccu RST_BUS_OHCI3>;
++			phys = <&usbphy 3>;
++			phy-names = "usb";
++			status = "disabled";
++		};
++
+ 		rtc: rtc@7000000 {
+ 			compatible = "allwinner,sun50i-h616-rtc";
+ 			reg = <0x07000000 0x400>;
+-- 
+2.40.1
+

recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0012-dts-orange-pi-zero2.patch

@@ -0,0 +1,84 @@
+From 038441bbe0f6dab3e701061c514a8d776dbe6523 Mon Sep 17 00:00:00 2001
+From: OpenEmbedded <oe.patch@oe>
+Date: Sat, 20 May 2023 14:07:47 +0200
+Subject: [PATCH] DTS orange pi zero2 enable usb
+
+Signed-off-by: OpenEmbedded <oe.patch@oe>
+---
+ .../allwinner/sun50i-h616-orangepi-zero2.dts  | 42 +++++++++++++++++++
+ 1 file changed, 42 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+index 88234a139..3b836296b 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+@@ -50,6 +50,16 @@ reg_vcc5v: vcc5v {
+ 		regulator-always-on;
+ 	};
+ 
++        reg_usb1_vbus: regulator-usb1-vbus {
++                compatible = "regulator-fixed";
++                regulator-name = "usb1-vbus";
++                regulator-min-microvolt = <5000000>;
++                regulator-max-microvolt = <5000000>;
++                vin-supply = <&reg_vcc5v>;
++                enable-active-high;
++                gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
++        };
++
+ 	reg_vcc33_wifi: vcc33-wifi {
+ 		/* Always on 3.3V regulator for WiFi and BT */
+ 		compatible = "regulator-fixed";
+@@ -79,6 +89,12 @@ wifi_pwrseq: wifi-pwrseq {
+ 	};
+ };
+ 
++&ehci1 {
++        status = "okay";
++};
++
++/* USB 2 & 3 are on headers only. */
++
+ &mmc1 {
+ 	vmmc-supply = <&reg_vcc33_wifi>;
+ 	vqmmc-supply = <&reg_vcc_wifi_io>;
+@@ -123,6 +139,11 @@ &mmc0 {
+ 	status = "okay";
+ };
+ 
++
++&ohci1 {
++	status = "okay";
++};
++
+ &r_rsb {
+ 	status = "okay";
+ 
+@@ -258,3 +279,24 @@ &uart0 {
+ 	pinctrl-0 = <&uart0_ph_pins>;
+ 	status = "okay";
+ };
++
++&usbotg {
++	/*
++	 * PHY0 pins are connected to a USB-C socket, but a role switch
++	 * is not implemented: both CC pins are pulled to GND.
++	 * The VBUS pins power the device, so a fixed peripheral mode
++	 * is the best choice.
++	 * The board can be powered via GPIOs, in this case port0 *can*
++	 * act as a host (with a cable/adapter ignoring CC), as VBUS is
++	 * then provided by the GPIOs. Any user of this setup would
++	 * need to adjust the DT accordingly: dr_mode set to "host",
++	 * enabling OHCI0 and EHCI0.
++	 */
++	dr_mode = "peripheral";
++	status = "okay";
++};
++
++&usbphy {
++	usb1_vbus-supply = <&reg_usb1_vbus>;
++	status = "okay";
++};
+-- 
+2.40.1
+

recipes-kernel/linux/linux-mainline.inc

@@ -0,0 +1,40 @@
+SECTION = "kernel"
+LICENSE = "GPL-2.0-only"
+LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
+
+inherit kernel
+
+require linux.inc
+
+# Since we're not using git, this doesn't make a difference, but we need to fill
+# in something or kernel-yocto.bbclass will fail.
+KBRANCH ?= "master"
+
+DEPENDS += "rsync-native"
+
+# Pull in the devicetree files into the rootfs
+RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"
+
+KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
+
+S = "${WORKDIR}/linux-${PV}"
+
+# get release version 5.x or 6.x based on version
+KRELEASE = "${@d.getVar('PV', True).split('.')[0]}"
+
+SRC_URI = "https://www.kernel.org/pub/linux/kernel/v${KRELEASE}.x/linux-${PV}.tar.xz \
+	file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
+	file://0002-dts-nanopi-neo-air-add-camera.patch \
+	file://0003-dts-allwinner-bananapi-m2-zreo-Enforce-consistent-MM.patch \
+	file://0004-dts-allwinner-bananapi-m64-Consistent-nodes-for-mmc-devices.patch \
+	file://defconfig \
+"
+
+SRC_URI:append:use-mailine-graphics = " file://drm.cfg"
+SRC_URI:append:bananapi = " file://axp20x.cfg"
+SRC_URI:append:bananapi-m2-zero = " file://axp20x.cfg"
+SRC_URI:append:cubietruck = " file://axp20x.cfg"
+SRC_URI:append:nanopi-neo-air = " file://cam500b.cfg"
+
+FILES_${KERNEL_PACKAGE_NAME}-base:append = " ${nonarch_base_libdir}/modules/${KERNEL_VERSION}/modules.builtin.modinfo"

recipes-kernel/linux/linux-mainline/0001-dts-orange-pi-zero-Add-wifi-support.patch

@@ -1,28 +1,18 @@
-From 055155f463693e61f9018a011ad600d872d6736f Mon Sep 17 00:00:00 2001
-From: Marek Belisko <marek.belisko@open-nandra.com>
-Date: Fri, 2 Aug 2019 14:46:10 +0200
-Subject: [PATCH] dts: orange-pi-zero: Add wifi support
-
-Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
----
- arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 47 ++++++++++++++++++-----
- 1 file changed, 37 insertions(+), 10 deletions(-)
-
 diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
-index 84cd9c0..77b2fc6 100644
+index 84cd9c061..917986cce 100644
 --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
 +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
-@@ -80,13 +80,14 @@
+@@ -80,13 +80,15 @@
  		};
  	};
  
 -	reg_vcc_wifi: reg_vcc_wifi {
--		compatible = "regulator-fixed";
++	vdd_wifi: vdd_wifi {
+ 		compatible = "regulator-fixed";
 -		regulator-min-microvolt = <3300000>;
 -		regulator-max-microvolt = <3300000>;
 -		regulator-name = "vcc-wifi";
 -		enable-active-high;
-+	vdd_wifi: vdd_wifi {
 +		regulator-name = "wifi";
 +		regulator-min-microvolt = <1800000>;
 +		regulator-max-microvolt = <1800000>;
@@ -33,7 +23,7 @@ index 84cd9c0..77b2fc6 100644
  	};
  
  	reg_vdd_cpux: vdd-cpux-regulator {
-@@ -106,10 +107,12 @@
+@@ -106,10 +108,12 @@
  			  1300000 1>;
  	};
  
@@ -48,7 +38,7 @@ index 84cd9c0..77b2fc6 100644
  	};
  };
  
-@@ -140,9 +143,11 @@
+@@ -140,9 +144,11 @@
  };
  
  &mmc1 {
@@ -62,7 +52,7 @@ index 84cd9c0..77b2fc6 100644
  	non-removable;
  	status = "okay";
  
-@@ -152,6 +157,13 @@
+@@ -152,6 +158,13 @@
  	 */
  	xr819: sdio_wifi@1 {
  		reg = <1>;
@@ -76,7 +66,7 @@ index 84cd9c0..77b2fc6 100644
  	};
  };
  
-@@ -208,3 +220,18 @@
+@@ -208,3 +221,18 @@
  	status = "okay";
  	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
  };
@@ -95,6 +85,3 @@ index 84cd9c0..77b2fc6 100644
 +    };
 +};
 +
--- 
-2.7.4
-

recipes-kernel/linux/linux-mainline/0002-dts-nanopi-neo-air-add-camera.patch

@@ -0,0 +1,101 @@
+diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+index cd3df12b65..33a161692f 100644
+--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
++++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+@@ -77,6 +77,39 @@
+ 		compatible = "mmc-pwrseq-simple";
+ 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+ 	};
++
++        cam_xclk: cam-xclk {
++                #clock-cells = <0>;
++                compatible = "fixed-clock";
++                clock-frequency = <24000000>;
++                clock-output-names = "cam-xclk";
++        };
++
++        reg_cam_avdd: cam-avdd {
++                compatible = "regulator-fixed";
++                regulator-name = "cam-avdd";
++                regulator-min-microvolt = <2800000>;
++                regulator-max-microvolt = <2800000>;
++                vin-supply = <&reg_vcc3v3>;
++        };
++
++        reg_cam_dovdd: cam-dovdd {
++                compatible = "regulator-fixed";
++                regulator-name = "cam-dovdd";
++                regulator-min-microvolt = <1800000>;
++                regulator-max-microvolt = <1800000>;
++                vin-supply = <&reg_vcc3v3>;
++        };
++
++        reg_cam_dvdd: cam-dvdd {
++                compatible = "regulator-fixed";
++                regulator-name = "cam-dvdd";
++                regulator-min-microvolt = <1500000>;
++                regulator-max-microvolt = <1500000>;
++                vin-supply = <&reg_vcc3v3>;
++        };
++
++
+ };
+ 
+ &mmc0 {
+@@ -141,3 +174,55 @@
+ 	/* USB VBUS is always on */
+ 	status = "okay";
+ };
++
++&csi {
++    status = "okay";
++
++    port {
++        #address-cells = <1>;
++        #size-cells = <0>;
++
++        /* Parallel bus endpoint */
++        csi_from_ov5640: endpoint {
++            remote-endpoint = <&ov5640_to_csi>;
++            bus-width = <8>;
++            data-shift = <2>;
++            hsync-active = <1>; /* Active high */
++            vsync-active = <0>; /* Active low */
++            data-active = <1>;  /* Active high */
++            pclk-sample = <1>;  /* Rising */
++        };
++    };
++};
++
++&i2c2 {
++   status = "okay";
++
++   ov5640: camera@3c {
++        compatible = "ovti,ov5640";
++        reg = <0x3c>;
++        clocks = <&cam_xclk>;
++        clock-names = "xclk";
++
++        reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>;
++        powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>;
++        AVDD-supply = <&reg_cam_avdd>;
++        DOVDD-supply = <&reg_cam_dovdd>;
++        DVDD-supply = <&reg_cam_dvdd>;
++
++        port {
++            ov5640_to_csi: endpoint {
++                remote-endpoint = <&csi_from_ov5640>;
++                bus-width = <8>;
++                data-shift = <2>;
++                hsync-active = <1>; /* Active high */
++                vsync-active = <0>; /* Active low */
++                data-active = <1>;  /* Active high */
++                pclk-sample = <1>;  /* Rising */
++            };
++        };
++    };
++};
++&i2c2_pins {
++   bias-pull-up;
++};
+

recipes-kernel/linux/linux-mainline/0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch

@@ -1,80 +0,0 @@
-From 4ca766a768e783ee5198f1935b7f46a5df9b4a35 Mon Sep 17 00:00:00 2001
-From: Jelle van der Waa <jelle@vdwaa.nl>
-Date: Tue, 23 Jan 2018 15:58:44 -0800
-Subject: [PATCH] ARM: dts: nanopi-neo-air: Add WiFi / eMMC
-
-Enable the WiFi (AP6212) chip and eMMC support for the NanoPi NEO Air.
-
-This patch was originally submitted by Jelle van der Waa. Martin Kelly
-modified it to compile on the latest kernel, fixed up some review
-comments from Maxime Ripard, and re-tested the patch.
-
-The patch has been reworked to add back eMMC support which has been left
-out at the last backport.
-
-Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
-Cc: linux-sunxi@googlegroups.com
-Cc: devicetree@vger.kernel.org
-Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
-Signed-off-by: Martin Kelly <mkelly@xevo.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Signed-off-by: Florin Sarbu <florin@resin.io>
----
- arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts | 34 +++++++++++++++++++++++++++
- 1 file changed, 34 insertions(+)
-
-diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
-index 03ff6f8..a9331fe 100644
---- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
-+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
-@@ -72,6 +72,11 @@
- 			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
- 		};
- 	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-+	};
- };
- 
- &mmc0 {
-@@ -84,6 +89,35 @@
- 	status = "okay";
- };
- 
-+&mmc1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc1_pins_a>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	vqmmc-supply = <&reg_vcc3v3>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	brcmf: bcrmf@1 {
-+		reg = <1>;
-+		compatible = "brcm,bcm4329-fmac";
-+		interrupt-parent = <&pio>;
-+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
-+		interrupt-names = "host-wake";
-+	};
-+};
-+
-+&mmc2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc2_8bit_pins>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	vqmmc-supply = <&reg_vcc3v3>;
-+	bus-width = <8>;
-+	non-removable;
-+	status = "okay";
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&uart0_pins_a>;
--- 
-2.11.0
-

recipes-kernel/linux/linux-mainline/0003-dts-allwinner-bananapi-m2-zreo-Enforce-consistent-MM.patch

@@ -0,0 +1,28 @@
+From 9b4baa9b5aab0511c46a1ae95485e1a3ea984352 Mon Sep 17 00:00:00 2001
+From: matteolel <matteolel91@hotmail.it>
+Date: Fri, 9 Dec 2022 16:38:11 +0000
+Subject: [PATCH] dts: allwinner: bananapi-m2-zreo: Enforce consistent MMC
+ numbering
+
+Enforce MMC number (sometimes the order was wrong and the device does not boot).
+---
+ arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+index 8e8634ff2..37a2ed937 100644
+--- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
++++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+@@ -20,6 +20,9 @@ / {
+ 	aliases {
+ 		serial0 = &uart0;
+ 		serial1 = &uart1;
++		mmc0 = &mmc0;
++		mmc1 = &mmc1;
++		mmc2 = &mmc2;
+ 	};
+ 
+ 	chosen {
+-- 
+2.25.1
+

recipes-kernel/linux/linux-mainline/0004-dts-allwinner-bananapi-m64-Consistent-nodes-for-mmc-devices.patch

@@ -0,0 +1,27 @@
+From f487f62babb11d014da7a0b58a0fcdf6d217a812 Mon Sep 17 00:00:00 2001
+From: Marek Belisko <marek.belisko@open-nandra.com>
+Date: Thu, 11 May 2023 11:18:33 +0200
+Subject: [PATCH] bananapi-m64: Consistent nodes for mmc devices
+
+Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+index e6d5bc0f7..39a28aad8 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
+@@ -16,6 +16,9 @@ aliases {
+ 		ethernet0 = &emac;
+ 		serial0 = &uart0;
+ 		serial1 = &uart1;
++                mmc0 = &mmc0;
++                mmc1 = &mmc1;
++                mmc2 = &mmc2;
+ 	};
+ 
+ 	chosen {
+-- 
+2.25.1
+

recipes-kernel/linux/linux-mainline/aarch64/defconfig

@@ -339,6 +339,7 @@ CONFIG_MFD_MAX77620=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_RK808=y
 CONFIG_MFD_SEC_CORE=y
+CONFIG_REGULATOR=y
 CONFIG_REGULATOR_AXP20X=y
 CONFIG_REGULATOR_FAN53555=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y

recipes-kernel/linux/linux-mainline/arm/defconfig

@@ -485,8 +485,8 @@ CONFIG_CW1200_WLAN_SDIO=m
 CONFIG_CW1200_WLAN_SPI=m
 CONFIG_RSI_91X=m
 # CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_INPUT_MOUSE=y
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_SUN4I=y
 CONFIG_INPUT_MISC=y

recipes-kernel/linux/linux-mainline/axp20x.cfg

@@ -0,0 +1,4 @@
+CONFIG_MFD_AXP20X_I2C=y
+CONFIG_MFD_AXP20X=y
+CONFIG_IIO=y
+CONFIG_AXP20X_POWER=y

recipes-kernel/linux/linux-mainline/cam500b.cfg

@@ -0,0 +1,6 @@
+CONFIG_MEDIA_PLATFORM_SUPPORT=y
+CONFIG_V4L_PLATFORM_DRIVERS=y
+
+CONFIG_VIDEO_OV5640=m
+CONFIG_VIDEO_SUN6I_CSI=m
+CONFIG_VIDEO_V4L2=m

recipes-kernel/linux/linux-mainline/drm.cfg

@@ -0,0 +1,9 @@
+CONFIG_DRM=y
+CONFIG_DRM_SUN4I=y
+CONFIG_DRM_SUN8I_DW_HDMI=y
+CONFIG_DRM_SUN8I_MIXER=y
+CONFIG_IOMMU_SUPPORT=y
+CONFIG_DRM_LIMA=y
+CONFIG_DRM_PANFROST=y
+CONFIG_CMA=y
+CONFIG_DMA_CMA=y

recipes-kernel/linux/linux-mainline_4.19.81.bb

@@ -1,32 +0,0 @@
-SECTION = "kernel"
-DESCRIPTION = "Mainline Longterm Linux kernel"
-LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
-COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
-
-inherit kernel
-
-require linux.inc
-
-# Since we're not using git, this doesn't make a difference, but we need to fill
-# in something or kernel-yocto.bbclass will fail.
-KBRANCH ?= "master"
-
-# Pull in the devicetree files into the rootfs
-RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"
-
-KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
-
-S = "${WORKDIR}/linux-${PV}"
-
-SRC_URI[md5sum] = "bf96b6783a2d11178a2aaa3cf376f975"
-SRC_URI[sha256sum] = "293ec1ae0f6b3b4be83a217224b51d137f2163cf2d9d294eecf5d0a354e4e29d"
-
-SRC_URI = "https://www.kernel.org/pub/linux/kernel/v4.x/linux-${PV}.tar.xz \
-        file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
-        file://defconfig \
-        "
-
-SRC_URI_append_orange-pi-zero += "\
-	file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
-	"

recipes-kernel/linux/linux-mainline_5.10.166.bb

@@ -0,0 +1,7 @@
+require linux-mainline.inc
+
+DESCRIPTION = "Mainline Longterm Linux kernel"
+
+LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46"
+
+SRC_URI[sha256sum] = "0051a1780e5bda0efc68dafab7c728b8283d2b028fedb439418f478be7d3e1af"

recipes-kernel/linux/linux-mainline_5.15.91.bb

@@ -0,0 +1,7 @@
+require linux-mainline.inc
+
+DESCRIPTION = "Mainline Longterm Linux kernel"
+
+LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46"
+
+SRC_URI[sha256sum] = "a63c2bb1beb15f1aea9c63cf80559f5b7ab58afd2da2fa5e7670c515ebe1fe80"

recipes-kernel/linux/linux-mainline_5.3.8.bb

@@ -1,34 +0,0 @@
-SECTION = "kernel"
-DESCRIPTION = "Mainline Stable Linux kernel"
-LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
-COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
-
-inherit kernel
-
-require linux.inc
-
-# Since we're not using git, this doesn't make a difference, but we need to fill
-# in something or kernel-yocto.bbclass will fail.
-KBRANCH ?= "master"
-
-DEPENDS += "rsync-native"
-
-# Pull in the devicetree files into the rootfs
-RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"
-
-KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
-
-S = "${WORKDIR}/linux-${PV}"
-
-SRC_URI[md5sum] = "6f4ab59d6ac7311f4245fc359706a0b7"
-SRC_URI[sha256sum] = "78f3cfc6c20b10ff21c0bb22d7d257cab03781c44d8c5aae289f749f94f76649"
-
-SRC_URI = "https://www.kernel.org/pub/linux/kernel/v5.x/linux-${PV}.tar.xz \
-        file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
-        file://defconfig \
-        "
-
-SRC_URI_append_orange-pi-zero += "\
-	file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
-	"

recipes-kernel/linux/linux-mainline_5.4-rc6.bb

@@ -1,36 +0,0 @@
-SECTION = "kernel"
-DESCRIPTION = "Mainline RC Linux kernel"
-LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
-COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
-
-inherit kernel
-
-require linux.inc
-
-# Since we're not using git, this doesn't make a difference, but we need to fill
-# in something or kernel-yocto.bbclass will fail.
-KBRANCH ?= "master"
-
-DEPENDS += "rsync-native"
-
-# Pull in the devicetree files into the rootfs
-RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"
-
-KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
-
-S = "${WORKDIR}/linux-${PV}"
-
-SRC_URI[md5sum] = "58b2b15fb3c429948051ce4f12f30c37"
-SRC_URI[sha256sum] = "b07532aa008438e0bce2b8f0253079a4f1654a048a75ae1477c8826f32feea7a"
-
-SRC_URI = "https://git.kernel.org/torvalds/t/linux-${PV}.tar.gz \
-        file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
-        file://defconfig \
-        "
-SRC_URI_append_orange-pi-zero += "\
-	file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
-	"
-
-FILES_${KERNEL_PACKAGE_NAME}-base_append = " ${nonarch_base_libdir}/modules/${KERNEL_VERSION}/modules.builtin.modinfo"
-

recipes-kernel/linux/linux-mainline_5.4.230.bb

@@ -0,0 +1,7 @@
+require linux-mainline.inc
+
+DESCRIPTION = "Mainline Longterm Linux kernel"
+
+LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
+
+SRC_URI[sha256sum] = "a74fd32ccc1025b72f3ba7183208761f7c6190fb96e8f484f6d543a5a183e62f"

recipes-kernel/linux/linux-mainline_6.1.9.bb

@@ -0,0 +1,23 @@
+require linux-mainline.inc
+
+DESCRIPTION = "Mainline Longterm Linux kernel"
+
+LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46"
+
+SRC_URI[sha256sum] = "d60cf185693c386e7acd9f3eb3a94ae30ffbfee0a9447a20e83711e0bdf5922b"
+
+SRC_URI:append:orange-pi-zero2  = " \
+        file://defconfig \
+        file://0001-drv-wireless-add-uwe5622-wifi-driver.patch \
+        file://0002-drv-wireless-driver-for-uwe5622-allwinner-bugfix.patch \
+        file://0003-drv-fix-incldue-path-for-unisocwcn.patch \
+        file://0004-drv-wireless-adapt-uwe5622-wifi-driver-to-kernel-6.1.patch \
+        file://0005-drv-fix-setting-mac-address-for-netdev-in-uwe5622.patch \
+        file://0006-drv-add-dump_reg-and-sunxi-sysinfo-drivers.patch \
+        file://0007-drv-add-sunxi_get_soc_chipid-and-sunxi_get_serial.patch \
+        file://0008-drv-add-sunxi-addr-driver.patch \
+        file://0009-dts-add-addr_mgt-device-tree-node.patch \
+        file://0010-dts-add-wifi-power-regulator.patch \
+        file://0011-dts-add-usb-to-h616.patch \
+        file://0012-dts-orange-pi-zero2.patch \
+"

recipes-kernel/linux/linux-sunxi/0004-arm-put-user-asm-fix.patch

@@ -0,0 +1,29 @@
+From 25a7e85eb0d58479f7d8895b1b29a648bd07d60e Mon Sep 17 00:00:00 2001
+From: Andrey Lebedev <andrey@lebedev.lt>
+Date: Mon, 20 Jan 2020 23:19:51 +0200
+Subject: [PATCH 2/2] Fix asm error in put_user under gcc version 8 and above
+
+Fixes these errors during compilation of linux-sunxi-3.4 kernel:
+/tmp/ccCGMQmS.s:648: Error: .err encountered
+
+Taken from https://patchwork.kernel.org/patch/10546809/
+---
+ arch/arm/include/asm/uaccess.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
+index b04850fd..abfafbbf 100644
+--- a/arch/arm/include/asm/uaccess.h
++++ b/arch/arm/include/asm/uaccess.h
+@@ -159,7 +159,7 @@ extern int __put_user_8(void *, unsigned long long);
+ 	({								\
+ 		unsigned long __limit = current_thread_info()->addr_limit - 1; \
+ 		const typeof(*(p)) __user *__tmp_p = (p);		\
+-		register const typeof(*(p)) __r2 asm("r2") = (x);	\
++		register typeof(*(p)) __r2 asm("r2") = (x);		\
+ 		register const typeof(*(p)) __user *__p asm("r0") = __tmp_p; \
+ 		register unsigned long __l asm("r1") = __limit;		\
+ 		register int __e asm("r0");				\
+-- 
+2.20.1
+

recipes-kernel/linux/linux-sunxi/0005-silence-warning.patch

@@ -0,0 +1,25 @@
+From 302604ee4a2011871cb26deaf69d567cf57d0fe3 Mon Sep 17 00:00:00 2001
+From: Andrey Lebedev <andrey@lebedev.lt>
+Date: Mon, 20 Jan 2020 23:20:07 +0200
+Subject: [PATCH 1/2] Silence annoying warning
+
+---
+ include/linux/log2.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/include/linux/log2.h b/include/linux/log2.h
+index fd7ff3d9..14458fdd 100644
+--- a/include/linux/log2.h
++++ b/include/linux/log2.h
+@@ -18,7 +18,7 @@
+ /*
+  * deal with unrepresentable constant logarithms
+  */
+-extern __attribute__((const, noreturn))
++extern __attribute__((const))
+ int ____ilog2_NaN(void);
+ 
+ /*
+-- 
+2.20.1
+

recipes-kernel/linux/linux-sunxi_3.4.bb

@@ -3,27 +3,30 @@ require linux.inc
 DESCRIPTION = "Linux kernel for Allwinner a10/a20 processors"
 
 COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
-RDEPENDS_${PN} += "sunxi-board-fex"
+RDEPENDS:${PN} += "sunxi-board-fex"
 
 PV = "3.4.104"
 PR = "r1"
-SRCREV_pn-${PN} = "d47d367036be38c5180632ec8a3ad169a4593a88"
+SRCREV = "d47d367036be38c5180632ec8a3ad169a4593a88"
 
-MACHINE_KERNEL_PR_append = "a"
+MACHINE_KERNEL_PR:append = "a"
 
-SRC_URI += "git://github.com/linux-sunxi/linux-sunxi.git;branch=sunxi-3.4;protocol=git \
+SRC_URI += "git://github.com/linux-sunxi/linux-sunxi.git;branch=sunxi-3.4;protocol=https \
         file://0001-compiler-gcc-integrate-the-various-compiler-gcc-345-.patch \
         file://0002-use-static-inline-in-ARM-ftrace.patch \
-        file://0001-gcc5-fixes.patch \
+        file://0003-gcc5-fixes.patch \
+        file://0004-arm-put-user-asm-fix.patch \
+        file://0005-silence-warning.patch \
         file://defconfig \
         "
+LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
 
 S = "${WORKDIR}/git"
 
 #fix QA issue "Files/directories were installed but not shipped: /usr/src/debug"
 INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
 
-do_configure_prepend() {
+do_configure:prepend() {
     #fix arch QA issues ("Architecture did not match")
     rm -f ${S}/drivers/net/wireless/rtxx7x/tools/bin2h
     rm -f ${S}/modules/wifi/ar6302/AR6K_SDK_ISC.build_3.1_RC.329/host/lib/wac/wac

recipes-kernel/linux/linux.inc

@@ -39,7 +39,7 @@ do_kernel_configme[depends] += "virtual/${TARGET_PREFIX}binutils:do_populate_sys
 do_kernel_configme[depends] += "virtual/${TARGET_PREFIX}gcc:do_populate_sysroot"
 do_kernel_configme[depends] += "bc-native:do_populate_sysroot bison-native:do_populate_sysroot"
 
-do_configure_prepend() {
+do_configure:prepend() {
     CONF_SED_SCRIPT=""
 
     #
@@ -118,15 +118,9 @@ do_configure_prepend() {
     yes '' | oe_runmake -C ${S} O=${B} oldconfig
 }
 
-do_configure_append() {
+do_configure:append() {
     if test -e scripts/Makefile.fwinst ; then
         sed -i -e "s:-m0644:-m 0644:g" scripts/Makefile.fwinst
     fi
 }
 
-do_install_append() {
-    oe_runmake headers_install INSTALL_HDR_PATH=${D}${exec_prefix}/src/linux-${KERNEL_VERSION} ARCH=$ARCH
-}
-
-PACKAGES =+ "kernel-headers"
-FILES_kernel-headers = "${exec_prefix}/src/linux*"

recipes-kernel/uwe5622-firmware/files/wifi_2355b001_1ant.ini

@@ -0,0 +1,177 @@
+[Section 1: Version]
+Major = 2
+Minor = 2
+
+[Section 2: Board Config]
+Calib_Bypass = 11758
+TxChain_Mask = 2
+RxChain_Mask = 2
+
+[Section 3: Board Config TPC]
+DPD_LUT_idx = 0x33,0x33,0x0,0x11,0x22,0x33,0x33,0x33
+TPC_Goal_Chain0 = 0,0,0,0,0,0,0,0
+TPC_Goal_Chain1 = 159,167,162,152,159,167,162,152
+
+[Section 4: TPC-LUT]
+Chain0_LUT_0 = 6,0,40,0
+Chain0_LUT_1 = 6,1,24,0
+Chain0_LUT_2 = 6,2,8,0
+Chain0_LUT_3 = 10,2,0,0
+Chain0_LUT_4 = 14,2,0,0
+Chain0_LUT_5 = 18,2,0,0
+Chain0_LUT_6 = 22,2,0,0
+Chain0_LUT_7 = 26,2,0,0
+Chain1_LUT_0 = 6,0,40,0
+Chain1_LUT_1 = 6,1,24,0
+Chain1_LUT_2 = 6,2,8,0
+Chain1_LUT_3 = 10,2,0,0
+Chain1_LUT_4 = 14,2,0,0
+Chain1_LUT_5 = 18,2,0,0
+Chain1_LUT_6 = 22,2,0,0
+Chain1_LUT_7 = 26,2,0,0
+
+[Section 5: Board Config Frequency Compensation]
+2G_Channel_Chain0 = 6,6,6,6,7,7,7,7,7,7,7,7,7,7
+2G_Channel_Chain1 = 6,6,6,6,7,7,7,7,7,7,7,7,7,7
+5G_Channel_Chain0 = 11,11,11,11,9,9,9,9,10,10,10,10,10,10,10,10,10,10,10,10,9,9,9,9,9
+5G_Channel_Chain1 = 11,11,11,11,9,9,9,9,10,10,10,10,10,10,10,10,10,10,10,10,9,9,9,9,9
+
+[Section 6: Rate To Power with BW 20M]
+11b_Power = 20,20,20,20
+11ag_Power = 28,32,36,44,28,32,36,48
+11n_Power = 34,38,38,40,40,44,44,48,32,36,36,40,40,44,44,54,48
+11ac_Power = 32,36,36,40,40,44,44,48,50,66,32,36,36,40,40,44,44,48,50,66
+
+[Section 7: Power Backoff]
+Green_WIFI_offset = 0
+HT40_Power_offset = 0
+VHT40_Power_offset = 0
+VHT80_Power_offset = 0
+SAR_Power_offset = 0
+Mean_Power_offset = 36
+
+[Section 8: Reg Domain]
+reg_domain1 = 0x00000001
+reg_domain2 = 0x00000002
+
+[Section 9: Band Edge Power offset (MKK, FCC, ETSI)]
+BW20M = 3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41
+BW40M = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21
+BW80M = 6,5,4,3,2,1
+
+[Section 10: TX Scale]
+Chain0_1 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16
+Chain1_1 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16
+Chain0_2 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,17
+Chain1_2 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,17
+Chain0_3 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,18
+Chain1_3 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,18
+Chain0_4 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,19
+Chain1_4 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,19
+Chain0_5 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,20
+Chain1_5 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,20
+Chain0_6 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,21
+Chain1_6 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,21
+Chain0_7 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,22
+Chain1_7 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,22
+Chain0_8 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,23
+Chain1_8 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,23
+Chain0_9 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,24
+Chain1_9 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,24
+Chain0_10 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,25
+Chain1_10 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,25
+Chain0_11 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,26
+Chain1_11 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,26
+Chain0_12 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,27
+Chain1_12 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,27
+Chain0_13 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,28
+Chain1_13 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,28
+Chain0_14 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,29
+Chain1_14 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,29
+Chain0_36 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,30
+Chain1_36 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,30
+Chain0_40 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,31
+Chain1_40 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,31
+Chain0_44 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,32
+Chain1_44 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,32
+Chain0_48 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,33
+Chain1_48 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,33
+Chain0_52 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,34
+Chain1_52 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,34
+Chain0_56 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,35
+Chain1_56 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,35
+Chain0_60 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,36
+Chain1_60 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,36
+Chain0_64 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,37
+Chain1_64 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,37
+Chain0_100 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,38
+Chain1_100 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,38
+Chain0_104 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,39
+Chain1_104 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,39
+Chain0_108 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,40
+Chain1_108 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,40
+Chain0_112 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,41
+Chain1_112 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,41
+Chain0_116 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,42
+Chain1_116 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,42
+Chain0_120 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,43
+Chain1_120 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,43
+Chain0_124 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,44
+Chain1_124 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,44
+Chain0_128 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,45
+Chain1_128 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,45
+Chain0_132 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,46
+Chain1_132 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,46
+Chain0_136 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,47
+Chain1_136 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,47
+Chain0_140 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,48
+Chain1_140 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,48
+Chain0_144 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,49
+Chain1_144 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,49
+Chain0_149 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,50
+Chain1_149 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,50
+Chain0_153 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,51
+Chain1_153 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,51
+Chain0_157 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,52
+Chain1_157 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,52
+Chain0_161 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,53
+Chain1_161 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,53
+Chain0_165 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,54
+Chain1_165 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,54
+
+[Section 11: misc]
+DFS_switch = 1
+power_save_switch = 2
+ex-Fem_and_ex-LNA_param_setup = 3
+rssi_report_diff = 4
+
+[Section 12: debug reg]
+address = 0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0x10,0x11,0x12,0x13,0x14,0x15,0x16
+value = 0x16,0x17,0x18,0x19,0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,0x29,0x30,0x31
+
+[Section 13: coex_config]
+bt_performance_cfg0 = 0x01010101
+bt_performance_cfg1 = 0x01000000
+wifi_performance_cfg0 = 0x01050A01
+wifi_performance_cfg2 = 0x00000000
+strategy_cfg0 = 0x01010100
+strategy_cfg1 = 0x03000000
+strategy_cfg2 = 0x08020000
+compatibility_cfg0 = 0x04040000
+compatibility_cfg1 = 0x0
+ant_cfg0 = 0x0
+ant_cfg1 = 0x0
+isolation_cfg0 = 0x0505
+isolation_cfg1 = 0x0
+reserved_cfg0 = 0x0
+reserved_cfg1 = 0x0
+reserved_cfg2 = 0x0
+reserved_cfg3 = 0x0
+reserved_cfg4 = 0x0
+reserved_cfg5 = 0x0
+reserved_cfg6 = 0x0
+reserved_cfg7 = 0x0
+
+[Section 14: rf_tlv_config]
+rf_config = 0xAA,0x55,0x00,0xFF,0x8,0xA,0x0,0x5,0x0,0x0,0x0,0x0,0x0,0x0
+

recipes-kernel/uwe5622-firmware/uwe5622-firmware.bb

@@ -0,0 +1,22 @@
+DESCRIPTION = "UWE5622 Wifi firmware"
+LICENSE = "CC0-1.0"
+LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/${LICENSE};md5=0ceb3372c9595f0a8067e55da801e4a1"
+
+S = "${WORKDIR}"
+
+COMPATIBLE_MACHINE = "orange-pi-zero2"
+
+SRC_URI:append = " \
+        file://wcnmodem.bin \
+        file://wifi_2355b001_1ant.ini \
+"
+
+do_install() {
+    install -d ${D}${base_libdir}/firmware
+    install -m 0644 ${S}/wcnmodem.bin ${D}${base_libdir}/firmware/wcnmodem.bin
+    install -m 0644 ${S}/wifi_2355b001_1ant.ini ${D}${base_libdir}/firmware/wifi_2355b001_1ant.ini
+}
+
+FILES:${PN} = "${base_libdir}/*"
+
+PACKAGES = "${PN}"

recipes-kernel/xradio-firmware/xradio-firmware.bb

@@ -5,7 +5,7 @@ LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/${LICENSE};md5=0ceb3372c9595f0a
 PV = "1.0"
 PR = "r0"
 
-SRCREV = "bddd21b7f895be9f0c37e435f0a7ac84405c6091"
+SRCREV = "761658e1701c77a0a84706754e6db1a25ee60b82"
 
 COMPATIBLE_MACHINE = "orange-pi-zero"
 
@@ -20,6 +20,6 @@ do_install() {
     install -m 0644 ${S}/xr819/fw_xr819.bin ${D}${base_libdir}/firmware/xr819/
 }
 
-FILES_${PN} = "${base_libdir}/*"
+FILES:${PN} = "${base_libdir}/*"
 
 PACKAGES = "${PN}"

recipes-kernel/xradio/xradio.bb

@@ -1,5 +1,5 @@
 SUMMARY = "Xradio WiFi driver for orangepi-zero"
-LICENSE = "GPLv2"
+LICENSE = "GPL-2.0-only"
 LIC_FILES_CHKSUM = "file://LICENSE;md5=a23a74b3f4caf9616230789d94217acb"
 
 inherit module
@@ -7,13 +7,15 @@ inherit module
 PV = "0.1"
 PR = "r0"
 
-RDEPENDS_${PN} += "xradio-firmware"
+RDEPENDS:${PN} += "xradio-firmware"
 
 COMPATIBLE_MACHINE = "orange-pi-zero"
 
-SRCREV = "d649e5a78efdc56ecd0951e35ca60db175650232"
+SRCREV = "279868ac96f6db34b65f68c6722830fa0aacb86b"
 
-SRC_URI = "git://github.com/fifteenhex/xradio.git;protocol=https \
+SRC_URI = "\
+	   git://github.com/dbeinder/xradio.git;protocol=https;branch=karabek_rebase \
+	file://0001-Enable-out-of-tree-compilation.patch \
           "
 
 S = "${WORKDIR}/git"

recipes-kernel/xradio/xradio/0001-Enable-out-of-tree-compilation.patch

@@ -0,0 +1,30 @@
+From 15651d333da5429a1544f0a17d5f02c74f693ad7 Mon Sep 17 00:00:00 2001
+From: Marek Belisko <marek.belisko@open-nandra.com>
+Date: Thu, 15 Oct 2020 14:45:07 +0200
+Subject: [PATCH] Enable out of tree compilation
+
+Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
+---
+ Makefile | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/Makefile b/Makefile
+index 7a0de9a..ee75f0b 100644
+--- a/Makefile
++++ b/Makefile
+@@ -1,9 +1,9 @@
+ # SPDX-License-Identifier: GPL-2.0-only
+ 
+ # # Standalone Makefile - uncomment for out-of-tree compilation
+-# CONFIG_WLAN_VENDOR_XRADIO := m
+-# ccflags-y += -DCONFIG_XRADIO_USE_EXTENSIONS
+-# ccflags-y += -DCONFIG_XRADIO_WAPI_SUPPORT
++CONFIG_WLAN_VENDOR_XRADIO := m
++ccflags-y += -DCONFIG_XRADIO_USE_EXTENSIONS
++ccflags-y += -DCONFIG_XRADIO_WAPI_SUPPORT
+ 
+ # Kernel part
+ 
+-- 
+2.7.4
+

recipes-multimedia/gstreamer/gst-plugin-cedar_git.bb

@@ -1,6 +1,6 @@
 SUMMARY = "CedarX Hardware Encoding GStreamer plug-in"
 SECTION = "multimedia"
-LICENSE = "GPLv2"
+LICENSE = "GPL-2.0-only"
 LIC_FILES_CHKSUM = "file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263"
 HOMEPAGE = "http://github.com/ebutera/gst-plugin-cedar"
 DEPENDS = "gstreamer gst-plugins-base"
@@ -10,14 +10,14 @@ inherit autotools pkgconfig
 # 0.10.1 Initial Import
 SRCREV = "908987a74d341be1376895023698667892fe5569"
 
-SRC_URI = "git://github.com/ebutera/gst-plugin-cedar.git"
+SRC_URI = "git://github.com/ebutera/gst-plugin-cedar.git;protocol=https;branch=master"
 
 PV = "0.10.1+git${SRCPV}"
 PR = "r1"
 
 S = "${WORKDIR}/git"
 
-FILES_${PN} += "${libdir}/gstreamer-0.10/*.so"
-FILES_${PN}-dbg += "${libdir}/gstreamer-0.10/.debug"
-FILES_${PN}-dev += "${libdir}/gstreamer-0.10/*.la"
-FILES_${PN}-staticdev += "${libdir}/gstreamer-0.10/*.a"
+FILES:${PN} += "${libdir}/gstreamer-0.10/*.so"
+FILES:${PN}-dbg += "${libdir}/gstreamer-0.10/.debug"
+FILES:${PN}-dev += "${libdir}/gstreamer-0.10/*.la"
+FILES:${PN}-staticdev += "${libdir}/gstreamer-0.10/*.a"

recipes-support/sunxi-tools/sunxi-tools_git.bb

@@ -1,13 +1,13 @@
 DESCRIPTION = "Tools to help hacking Allwinner A10 and A20"
 
-LICENSE = "GPLv2+"
+LICENSE = "GPL-2.0-only"
 LIC_FILES_CHKSUM = "file://LICENSE.md;md5=97bd67b5d0309e452b637f76e1c9a23c"
 
 PR = "r0"
 
 DEPENDS += "libusb"
 
-SRC_URI = "git://github.com/linux-sunxi/sunxi-tools;protocol=git"
+SRC_URI = "git://github.com/linux-sunxi/sunxi-tools;protocol=https;branch=master"
 SRCREV = "9a3d62aa0c820b3dd42ba3409b2043f4143683cd"
 
 inherit pkgconfig
@@ -16,7 +16,7 @@ S = "${WORKDIR}/git"
 
 BBCLASSEXTEND = "native nativesdk"
 
-FILES_${PN} = "${bindir}/*"
+FILES:${PN} = "${bindir}/*"
 
 CFLAGS = "-std=c99 -D_POSIX_C_SOURCE=200112L -I./include"
 CFLAGS_class-native = "-std=c99 -D_POSIX_C_SOURCE=200112L -I./include"

wic/sunxi-sdcard-image.wks.in

@@ -0,0 +1,18 @@
+# short-description: Create SD card image with a boot partition
+# long-description:
+# Create an image that can be written onto a SD card using dd for use
+# with Allwinner arm (32-bit) SoC family
+#
+# The disk layout used is:
+#  - --------------------------- -------------- --------------
+# | | u-boot-sunxi-with-spl.bin |     boot     |    rootfs    |
+#  - --------------------------- -------------- --------------
+# ^ ^                           ^              ^              ^
+# | |                           |              |              |
+# 0 |                         2MiB  ${SUNXI_BOOT_SPACE}MiB  ${SUNXI_BOOT_SPACE}MiB + rootfs + IMAGE_EXTRA_SPACE
+#   8KiB 
+#
+
+part u-boot --source rawcopy --sourceparams="file=${SPL_BINARY}" --ondisk mmcblk0 --no-table --align 8
+part /boot --source bootimg-partition --ondisk mmcblk0 --fstype=vfat --label boot --active --align 2048 --fixed-size ${SUNXI_BOOT_SPACE}
+part /     --source rootfs --ondisk mmcblk0 --fstype=ext4 --align 2048