README: update email

Signed-off-by: Enrico Butera <ebutera@users.sourceforge.net>

README.md

@@ -1,82 +1,12 @@
-meta-sunxi
+meta-allwinner
 ==============
 
-Official sunxi OpenEmbedded layer for Allwinner-based boards.
+UNOFFICIAL OE-core layer for Allwinner A10 boards
 
-This layer depends on the additional layers:
+Author: Enrico Butera <ebutera@users.sourceforge.net>
 
-* [meta-openembedded/meta-oe](http://git.openembedded.org/meta-openembedded/tree/meta-oe)
-
-Tested with core-image-base.
-
-Maintainers:
-
-* Nicolas Aguirre <aguirre.nicolas@gmail.com>
-* Enrico Butera <ebutera@users.sourceforge.net>
-* Sergey Lapin <slapin@ossfans.org>
-* Marek Belisko <marek.belisko@gmail.com>
-
-Kernel / U-Boot Version
-===========
-Most Allwinner devices and hardware are supported in mainline kernel and U-Boot, so this layer builds mainline by default.
-
-Legacy sunxi Kernel / U-Boot
------------
-
-There is a custom U-Boot and Kernel version for sunxi devices which includes some special drivers not mainlined.
-These versions are rather old (3.4 for kernel and 2014.04 for U-Boot), but may support more functions and devices than current mainline.
-
-If you want to switch back to sunxi versions for some reasons (no device tree available, unsupported hardware), either:
-- change the file conf/machine/include/sunxi.inc to include the following block
-- edit your conf/local.conf to add the following block
-
-		PREFERRED_PROVIDER_u-boot="u-boot-sunxi"
-		PREFERRED_PROVIDER_virtual/bootloader="u-boot-sunxi"
-		PREFERRED_PROVIDER_virtual/kernel="linux-sunxi"
-		KERNEL_DEVICETREE = ""
-
-If you already have built the mainline versions it might be necessary to reset the build directories with:
-
-	bitbake -c clean virtual/kernel virtual/bootloader
-
-Mainline Kernel / U-Boot
------------
-
-For mainline kernel we have now support for latest LTS and stable.
-By default we use latest LTS. If you would like to change version please update ```PREFERRED_VERSION_linux-mainline``` in:
-* [conf/machine/include/sunxi.inc](https://github.com/linux-sunxi/meta-sunxi/blob/fa0846c0eb23e3424b89acb4d5a327e921f73497/conf/machine/include/sunxi.inc#L16)
-
-When using mainline kernel ≥ 5.2 it is now possible to use the mainline graphics drivers *lima* and *panfrost*, instead of the *mali* driver provided by ARM. To enable open source mainline graphics support add the following line in your `local.conf`:
-
-    MACHINEOVERRIDES .= ":use-mailine-graphics"
-
-Performance
-===========
-The default machine settings are meant to be the lowest common denominator, maximizing generality.
-Significantly better performance (2x-3x) can be achieved with the following settings:
-
-**_Allwinner A20_**
-
-For Allwinner A20 (Cubieboard2/CubieTruck), the following tuning options are recommended:
-
-_Enable hardfloat, thumb2 and neon capabilities_
-
-	DEFAULTTUNE = "cortexa7hf-neon-vfpv4"
-
-This tuning profile takes advantage of the Allwinner A20 hardfloat, neon and vfpv4 capabilities.
-
-_Change CPU governor to ondemand, and tune settings_
-
-	echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
-	echo 336000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq
-	echo 912000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
-	#More aggressive
-	#echo 1008000 > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
-	echo 40 > /sys/devices/system/cpu/cpufreq/ondemand/up_threshold
-	echo 200000 > /sys/devices/system/cpu/cpufreq/ondemand/sampling_rate
-
-This code changes the default CPU governor from _fantasy_ to _ondemand_, and tunes its settings, as recommended at http://linux-sunxi.org/Cpufreq
-
-For additional discussion, see https://github.com/linux-sunxi/meta-sunxi/issues/25
+This layer depends on the additional layer:
 
+meta-openembedded: git://git.openembedded.org/meta-openembedded
 
+Build tested with core-image-base.

classes/sdcard_image-a10.bbclass

@@ -0,0 +1,85 @@
+inherit image_types
+
+#
+# Create an image that can by written onto a SD card using dd.
+# Originally written for rasberrypi adapt for the needs of allwinner a10 based boards
+#
+# The disk layout used is:
+#
+#    0                      -> 8*1024                           - reserverd
+#    8*1024                 -> 32*1024                          - 
+#    32*1024                -> 2048*1024                        - 
+#    2048*1024              -> BOOT_SPACE                       - bootloader and kernel
+#
+#
+
+
+# Boot partition volume id
+BOOTDD_VOLUME_ID ?= "${MACHINE}"
+
+# Boot partition size [in KiB]
+BOOT_SPACE ?= "20480"
+
+# First partition begin at sector 2048 : 2048*1024 = 2097152
+IMAGE_ROOTFS_ALIGNMENT = "2048"
+
+# Use an uncompressed ext3 by default as rootfs
+SDIMG_ROOTFS_TYPE ?= "ext3"
+SDIMG_ROOTFS = "${IMAGE_NAME}.rootfs.${SDIMG_ROOTFS_TYPE}"
+
+IMAGE_DEPENDS_a10-sdimg = " \
+			parted-native \
+			mtools-native \
+			dosfstools-native \
+			virtual/kernel \
+			virtual/bootloader \
+			"
+
+# SD card image name
+SDIMG = "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.a10-sdimg"
+
+IMAGEDATESTAMP = "${@time.strftime('%Y.%m.%d',time.gmtime())}"
+
+IMAGE_CMD_a10-sdimg () {
+
+	# Align partitions
+	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
+	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT})
+	SDIMG_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $ROOTFS_SIZE + ${IMAGE_ROOTFS_ALIGNMENT})
+
+	# Initialize sdcard image file
+	dd if=/dev/zero of=${SDIMG} bs=1 count=0 seek=$(expr 1024 \* ${SDIMG_SIZE})
+
+	# Create partition table
+	parted -s ${SDIMG} mklabel msdos
+	# Create boot partition and mark it as bootable
+	parted -s ${SDIMG} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT})
+	parted -s ${SDIMG} set 1 boot on
+	# Create rootfs partition
+	parted -s ${SDIMG} unit KiB mkpart primary ext2 $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT}) $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT} \+ ${ROOTFS_SIZE})
+	parted ${SDIMG} print
+
+	# Create a vfat image with boot files
+	BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }')
+	mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
+	mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/u-boot.bin ::
+	mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::uImage
+
+	# Add stamp file
+	echo "${IMAGE_NAME}-${IMAGEDATESTAMP}" > ${WORKDIR}/image-version-info
+	mcopy -i ${WORKDIR}/boot.img -v ${WORKDIR}//image-version-info ::
+
+	# Burn Partitions
+	dd if=${WORKDIR}/boot.img of=${SDIMG} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
+	# If SDIMG_ROOTFS_TYPE is a .xz file use xzcat
+	if [[ "$SDIMG_ROOTFS_TYPE" == *.xz ]]
+	then
+		xzcat ${SDIMG_ROOTFS} | dd of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
+	else
+		dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
+	fi
+
+	#write u-boot-spl.bin and u-boot
+	dd if=${DEPLOY_DIR_IMAGE}/sunxi-spl.bin of=${SDIMG} bs=1024 seek=8 conv=notrunc
+	dd if=${DEPLOY_DIR_IMAGE}/u-boot.bin of=${SDIMG} bs=1024 seek=32 conv=notrunc
+}

classes/sdcard_image-sunxi.bbclass

@@ -1,124 +0,0 @@
-inherit image_types
-
-#
-# Create an image that can by written onto a SD card using dd.
-# Originally written for rasberrypi adapt for the needs of allwinner sunxi based boards
-#
-# The disk layout used is:
-#
-#    0                      -> 8*1024                           - reserverd
-#    8*1024                 ->                                  - arm combined spl/u-boot or aarch64 spl
-#    40*1024                ->                                  - aarch64 u-boot
-#    2048*1024              -> BOOT_SPACE                       - bootloader and kernel
-#
-#
-
-# This image depends on the rootfs image
-IMAGE_TYPEDEP_sunxi-sdimg = "${SDIMG_ROOTFS_TYPE}"
-
-# Boot partition volume id
-BOOTDD_VOLUME_ID ?= "boot"
-
-# Boot partition size [in KiB]
-BOOT_SPACE ?= "40960"
-
-# First partition begin at sector 2048 : 2048*1024 = 2097152
-IMAGE_ROOTFS_ALIGNMENT = "2048"
-
-# Use an uncompressed ext4 by default as rootfs
-SDIMG_ROOTFS_TYPE ?= "ext4"
-SDIMG_ROOTFS = "${IMGDEPLOYDIR}/${IMAGE_NAME}.rootfs.${SDIMG_ROOTFS_TYPE}"
-
-do_image_sunxi_sdimg[depends] += " \
-			parted-native:do_populate_sysroot \
-			mtools-native:do_populate_sysroot \
-			dosfstools-native:do_populate_sysroot \
-			virtual/kernel:do_deploy \
-			virtual/bootloader:do_deploy \
-			"
-
-# SD card image name
-SDIMG = "${IMGDEPLOYDIR}/${IMAGE_NAME}.rootfs.sunxi-sdimg"
-
-IMAGE_CMD_sunxi-sdimg () {
-
-	# Align partitions
-	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
-	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT})
-	SDIMG_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $ROOTFS_SIZE + ${IMAGE_ROOTFS_ALIGNMENT})
-
-	# Initialize sdcard image file
-	dd if=/dev/zero of=${SDIMG} bs=1 count=0 seek=$(expr 1024 \* ${SDIMG_SIZE})
-
-	# Create partition table
-	parted -s ${SDIMG} mklabel msdos
-	# Create boot partition and mark it as bootable
-	parted -s ${SDIMG} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT})
-	parted -s ${SDIMG} set 1 boot on
-	# Create rootfs partition
-	parted -s ${SDIMG} unit KiB mkpart primary ext2 $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT}) $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT} \+ ${ROOTFS_SIZE})
-	parted ${SDIMG} print
-
-	# Create a vfat image with boot files
-	BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }')
-	rm -f ${WORKDIR}/boot.img
-	mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
-
-	mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::${KERNEL_IMAGETYPE}
-
-	# Copy device tree file
-	if test -n "${KERNEL_DEVICETREE}"; then
-		for DTS_FILE in ${KERNEL_DEVICETREE}; do
-			DTS_BASE_NAME=`basename ${DTS_FILE} | awk -F "." '{print $1}'`
-			DTS_DIR_NAME=`dirname ${DTS_FILE}`
-			if [ -e ${DEPLOY_DIR_IMAGE}/"${DTS_BASE_NAME}.dtb" ]; then
-
-				if [ ${DTS_FILE} != ${DTS_BASE_NAME}.dtb ]; then
-					mmd -i ${WORKDIR}/boot.img ::/${DTS_DIR_NAME}
-				fi
-
-				kernel_bin="`readlink ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin`"
-				kernel_bin_for_dtb="`readlink ${DEPLOY_DIR_IMAGE}/${DTS_BASE_NAME}.dtb | sed "s,$DTS_BASE_NAME,${KERNEL_IMAGETYPE},g;s,\.dtb$,.bin,g"`"
-				if [ $kernel_bin = $kernel_bin_for_dtb ]; then
-					mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${DTS_BASE_NAME}.dtb ::/${DTS_FILE}
-				fi
-			fi
-		done
-	fi
-
-	if [ -e "${DEPLOY_DIR_IMAGE}/fex.bin" ]
-	then
-		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/fex.bin ::script.bin
-	fi
-	if [ -e "${DEPLOY_DIR_IMAGE}/boot.scr" ]
-	then
-		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/boot.scr ::boot.scr
-	fi
-
-
-	# Add stamp file
-	echo "${IMAGE_NAME}" > ${WORKDIR}/image-version-info
-	mcopy -i ${WORKDIR}/boot.img -v ${WORKDIR}/image-version-info ::
-
-	# Burn Partitions
-	dd if=${WORKDIR}/boot.img of=${SDIMG} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
-	# If SDIMG_ROOTFS_TYPE is a .xz file use xzcat
-	if echo "${SDIMG_ROOTFS_TYPE}" | egrep -q "*\.xz"
-	then
-		xzcat ${SDIMG_ROOTFS} | dd of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
-	else
-		dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
-	fi
-
-	# write u-boot-spl at the begining of sdcard in one shot
-	SPL_FILE=$(basename ${SPL_BINARY})
-	dd if=${DEPLOY_DIR_IMAGE}/${SPL_FILE} of=${SDIMG} bs=1024 seek=8 conv=notrunc
-}
-
-# write uboot.itb for arm64 boards
-IMAGE_CMD_sunxi-sdimg_append_sun50i () {
-	if [ -e "${DEPLOY_DIR_IMAGE}/${UBOOT_BINARY}" ]
-	then
-		dd if=${DEPLOY_DIR_IMAGE}/${UBOOT_BINARY} of=${SDIMG} bs=1024 seek=40 conv=notrunc
-	fi
-}

conf/layer.conf

@@ -4,14 +4,6 @@ BBPATH .= ":${LAYERDIR}"
 # We have a recipes directory, add to BBFILES
 BBFILES += "${LAYERDIR}/recipes*/*/*.bb ${LAYERDIR}/recipes*/*/*.bbappend"
 
-BBFILE_COLLECTIONS += "meta-sunxi"
-BBFILE_PATTERN_meta-sunxi := "^${LAYERDIR}/"
-BBFILE_PRIORITY_meta-sunxi = "10"
-
-# This should only be incremented on significant changes that will
-# cause compatibility issues with other layers
-LAYERVERSION_meta-sunxi = "1"
-
-LAYERDEPENDS_meta-sunxi = "core openembedded-layer"
-
-LAYERSERIES_COMPAT_meta-sunxi = "zeus dunfell"
+BBFILE_COLLECTIONS += "meta-allwinner"
+BBFILE_PATTERN_meta-allwinner := "^${LAYERDIR}/"
+BBFILE_PRIORITY_meta-allwinner = "10"

conf/machine/bananapi-m2m.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: bananapi-m2m
-#@DESCRIPTION: Machine configuration for the Banana Pi M2M, base on Allwinner H8 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-r16-bananapi-m2m.dtb"
-UBOOT_MACHINE = "Bananapi_m2m_defconfig"
-

conf/machine/bananapi-m2plus.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: bananapi-m2plus
-#@DESCRIPTION: Machine configuration for the Banana Pi M2+, base on Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-bananapi-m2-plus.dtb"
-UBOOT_MACHINE = "bananapi_m2_plus_h3_defconfig"
-

conf/machine/bananapi-m64.conf

@@ -1,8 +0,0 @@
-#@TYPE: Machine
-#@NAME: pine64-plus
-#@DESCRIPTION: Machine configuration for the pine64-plus, based on Allwinner A64 CPU
-
-require conf/machine/include/sun50i.inc
-
-KERNEL_DEVICETREE = "allwinner/sun50i-a64-bananapi-m64.dtb"
-UBOOT_MACHINE = "bananapi_m64_defconfig"

conf/machine/bananapi.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: Bananapi
-#@DESCRIPTION: Machine configuration for the bananapi, based on allwinner A20 CPU http://bananapi.org/
-
-require conf/machine/include/sun7i.inc
-
-KERNEL_DEVICETREE = "sun7i-a20-bananapi.dtb"
-UBOOT_MACHINE = "Bananapi_config"
-SUNXI_FEX_FILE = "sys_config/a20/Bananapi.fex"

conf/machine/cubieboard.conf

@@ -2,8 +2,33 @@
 #@NAME: CubieBoard
 #@DESCRIPTION: Machine configuration for the cubieboard, based on allwinner a10 CPU http://cubieboard.org/
 
-require conf/machine/include/sun4i.inc
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+XSERVER = "xserver-xorg \
+           xf86-input-evdev \
+           xf86-input-mouse \
+           xf86-input-keyboard"
 
-KERNEL_DEVICETREE = "sun4i-a10-cubieboard.dtb"
-UBOOT_MACHINE = "Cubieboard_config"
-SUNXI_FEX_FILE = "sys_config/a10/cubieboard.fex"
+# Only has DVI connector for external screen
+GUI_MACHINE_CLASS = "bigscreen"
+
+require conf/machine/include/tune-cortexa8.inc
+
+PREFERRED_PROVIDER_virtual/kernel = "linux"
+PREFERRED_VERSION_linux-libc-headers = "3.0.8"
+
+KERNEL_IMAGETYPE = "uImage"
+
+UBOOT_MACHINE = "cubieboard"
+UBOOT_ENTRYPOINT = "0x40008000"
+UBOOT_LOADADDRESS = "0x40008000"
+
+SPL_BINARY = "sunxi-spl.bin"
+
+IMAGE_CLASSES += "sdcard_image-a10"
+IMAGE_FSTYPES += "ext3 a10-sdimg"
+
+
+# Guesswork
+SERIAL_CONSOLE = "115200 ttyS0"
+
+MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"

conf/machine/cubieboard2.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: CubieBoard2
-#@DESCRIPTION: Machine configuration for the cubieboard2, based on allwinner A20 CPU http://cubieboard.org/
-
-require conf/machine/include/sun7i.inc
-
-KERNEL_DEVICETREE = "sun7i-a20-cubieboard2.dtb"
-UBOOT_MACHINE = "Cubieboard2_config"
-SUNXI_FEX_FILE = "sys_config/a20/cubieboard2.fex"

conf/machine/cubietruck.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: Cubietruck
-#@DESCRIPTION: Machine configuration for the Cubietruck, based on allwinner A20 CPU http://cubieboard.org/
-
-require conf/machine/include/sun7i.inc
-
-KERNEL_DEVICETREE = "sun7i-a20-cubietruck.dtb"
-UBOOT_MACHINE = "Cubietruck_config"
-SUNXI_FEX_FILE = "sys_config/a20/cubietruck.fex"

conf/machine/forfun-q88db.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: Forfun Q88DB
-#@DESCRIPTION: Machine configuration for the Forfun Q88DB Tablet with A13 CPU
-#http://linux-sunxi.org/Forfun_Q88DB
-
-require conf/machine/include/sun5i.inc
-
-UBOOT_MACHINE = "forfun_q88db_defconfig"
-SUNXI_FEX_FILE = "sys_config/a13/forfun_q88db.fex"

conf/machine/include/hardware/ap6212a.inc

@@ -1,5 +0,0 @@
-# Include for boards with AMPAK 6212A Wifi / Bluetooth module
-# https://linux-sunxi.org/Wifi#Ampak
-
-MACHINE_EXTRA_RRECOMMENDS_append = " kernel-module-brcmfmac"
-MACHINE_EXTRA_RDEPENDS_append = " linux-firmware-bcm43430"

conf/machine/include/sun4i.inc

@@ -1,5 +0,0 @@
-require conf/machine/include/sunxi.inc
-require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/tune-cortexa8.inc
-
-SOC_FAMILY = "sun4i"

conf/machine/include/sun50i.inc

@@ -1,6 +0,0 @@
-require conf/machine/include/sunxi64.inc
-
-DEFAULTTUNE ?= "cortexa53-crypto"
-require conf/machine/include/tune-cortexa53.inc
-
-SOC_FAMILY = "sun50i"

conf/machine/include/sun5i.inc

@@ -1,5 +0,0 @@
-require conf/machine/include/sunxi.inc
-require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/tune-cortexa8.inc
-
-SOC_FAMILY = "sun5i"

conf/machine/include/sun7i.inc

@@ -1,5 +0,0 @@
-require conf/machine/include/sunxi.inc
-require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/tune-cortexa7.inc
-
-SOC_FAMILY = "sun7i"

conf/machine/include/sun8i.inc

@@ -1,5 +0,0 @@
-require conf/machine/include/sunxi.inc
-require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/tune-cortexa7.inc
-
-SOC_FAMILY = "sun8i"

conf/machine/include/sunxi-mali-driver.inc

@@ -1,15 +0,0 @@
-PREFERRED_PROVIDER_virtual/mesa ?= "mesa-gl"
-PREFERRED_PROVIDER_virtual/libgl ?= "mesa-gl"
-PREFERRED_PROVIDER_virtual/libgles1 ?= "sunxi-mali"
-PREFERRED_PROVIDER_virtual/libgles2 ?= "sunxi-mali"
-PREFERRED_PROVIDER_virtual/egl ?= "sunxi-mali"
-
-PACKAGECONFIG_remove_pn-xserver-xorg = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'glamor', '', d)}"
-
-XSERVER += "sunxi-mali \
-            sunxi-mali-dev"
-
-MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "\
- kernel-module-mali \
- kernel-module-mali-drm \
-  "

conf/machine/include/sunxi-mali.inc

@@ -1,5 +0,0 @@
-# The "sunxi-mailine-graphics-drivers.inc" doesn't exist, but it can be created
-# in the future if needed.  Using include directive ensures build doesn't fail
-# if .inc file doesn't exist:
-# https://www.yoctoproject.org/pipermail/yocto/2019-August/046484.html
-include ${@'sunxi-mali-driver.inc' if 'use-mailine-graphics' not in d.getVar("MACHINEOVERRIDES").split(":") else 'sunxi-mailine-graphics-drivers.inc' }

conf/machine/include/sunxi.inc

@@ -1,34 +0,0 @@
-SOC_FAMILY ??= ""
-include conf/machine/include/soc-family.inc
-
-# Sub-architecture support
-MACHINE_SOCARCH_SUFFIX ?= ""
-MACHINE_SOCARCH_SUFFIX_sun4i = "-sun4i"
-
-PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
-XSERVER = "xserver-xorg \
-           xf86-video-fbturbo \
-           xf86-input-evdev \
-           xf86-input-mouse \
-           xf86-input-keyboard"
-
-PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
-PREFERRED_VERSION_linux-mainline ?= "5.4.%"
-PREFERRED_PROVIDER_u-boot ?= "u-boot"
-PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
-
-KERNEL_IMAGETYPE ?= "uImage"
-
-IMAGE_CLASSES += "sdcard_image-sunxi"
-IMAGE_FSTYPES += "ext3 tar.gz sunxi-sdimg"
-
-MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"
-
-UBOOT_LOCALVERSION = "-g${@d.getVar('SRCPV', True).partition('+')[2][0:7]}"
-
-UBOOT_ENTRYPOINT ?= "0x40008000"
-
-SPL_BINARY ?= "u-boot-sunxi-with-spl.bin"
-
-SERIAL_CONSOLE ?= "115200 ttyS0"
-MACHINE_FEATURES ?= "alsa apm keyboard rtc serial screen usbgadget usbhost vfat"

conf/machine/include/sunxi64.inc

@@ -1,24 +0,0 @@
-SOC_FAMILY ??= ""
-include conf/machine/include/soc-family.inc
-
-PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
-PREFERRED_PROVIDER_u-boot ?= "u-boot"
-PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
-
-KERNEL_IMAGETYPE ?= "Image"
-
-IMAGE_CLASSES += "sdcard_image-sunxi"
-IMAGE_FSTYPES += "ext4 tar.gz sunxi-sdimg"
-
-MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"
-
-UBOOT_LOCALVERSION = "-g${@d.getVar('SRCPV', True).partition('+')[2][0:7]}"
-
-UBOOT_ENTRYPOINT ?= "0x40008000"
-UBOOT_LOADADDRESS ?= "0x400080OB00"
-
-UBOOT_BINARY ?= "u-boot.itb"
-SPL_BINARY ?= "spl/sunxi-spl.bin"
-
-SERIAL_CONSOLE ?= "115200 ttyS0"
-MACHINE_FEATURES ?= "alsa apm keyboard rtc serial screen usbgadget usbhost vfat"

conf/machine/mele.conf

@@ -2,8 +2,32 @@
 #@NAME: Mele a1000/a2000
 #@DESCRIPTION: Machine configuration for the Mele a1000 and a2000, base on allwinner a10 CPU
 
-require conf/machine/include/sun4i.inc
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+XSERVER = "xserver-xorg \
+           xf86-input-evdev \
+           xf86-input-mouse \
+           xf86-input-keyboard"
 
-KERNEL_DEVICETREE = "sun4i-a10-a1000.dtb"
-UBOOT_MACHINE = "Mele_A1000_config"
-SUNXI_FEX_FILE = "sys_config/a10/mele_a1000.fex"
+# Only has DVI connector for external screen
+GUI_MACHINE_CLASS = "bigscreen"
+
+require conf/machine/include/tune-cortexa8.inc
+
+PREFERRED_PROVIDER_virtual/kernel = "linux"
+PREFERRED_VERSION_linux-libc-headers = "3.0.8"
+
+KERNEL_IMAGETYPE = "uImage"
+
+UBOOT_MACHINE = "cubieboard"
+UBOOT_ENTRYPOINT = "0x40008000"
+UBOOT_LOADADDRESS = "0x40008000"
+
+SPL_BINARY = "sunxi-spl.bin"
+
+IMAGE_CLASSES += "sdcard_image-a10"
+IMAGE_FSTYPES += "ext3 a10-sdimg"
+
+# Guesswork
+SERIAL_CONSOLE = "115200 ttyS0"
+
+MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"

conf/machine/meleg.conf

@@ -1,8 +0,0 @@
-#@TYPE: Machine
-#@NAME: Mele a1000g/a2000g
-#@DESCRIPTION: Machine configuration for the Mele a1000g and a2000g, base on allwinner a10 CPU
-
-require conf/machine/include/sun4i.inc
-
-UBOOT_MACHINE = "Mele_A1000G_quad_config"
-SUNXI_FEX_FILE = "sys_config/a10/mele_a1000g.fex"

conf/machine/nanopi-m1-plus.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: nanopi M1 Plus
-#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo, based on the Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-nanopi-m1-plus.dtb"
-UBOOT_MACHINE = "nanopi_m1_plus_defconfig"
-

conf/machine/nanopi-neo-air.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: nanopi-neo-air
-#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo Air, based
-# on the Allwinner H3 CPU.
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo-air.dtb"
-UBOOT_MACHINE = "nanopi_neo_air_defconfig"

conf/machine/nanopi-neo-plus2.conf

@@ -1,10 +0,0 @@
-#@TYPE: Machine
-#@NAME: nanopi-neo-plus2
-#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo Plus2, based
-# on the Allwinner H5 SoC.
-
-require conf/machine/include/sun50i.inc
-require conf/machine/include/hardware/ap6212a.inc
-
-KERNEL_DEVICETREE = "allwinner/sun50i-h5-nanopi-neo-plus2.dtb"
-UBOOT_MACHINE = "nanopi_neo_plus2_defconfig"

conf/machine/nanopi-neo.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: nanopi-neo
-#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo, based on the Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo.dtb"
-UBOOT_MACHINE = "nanopi_neo_defconfig"
-

conf/machine/nanopi-neo2.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: nanopi-neo2
-#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo 2, based on
-# the Allwinner H5 SoC.
-
-require conf/machine/include/sun50i.inc
-
-KERNEL_DEVICETREE = "allwinner/sun50i-h5-nanopi-neo2.dtb"
-UBOOT_MACHINE = "nanopi_neo2_defconfig"

conf/machine/olinuxino-a10lime.conf

@@ -1,10 +0,0 @@
-#@TYPE: Machine
-#@NAME: Olimex A10-OLinuXino Lime (4GB) Board
-#@DESCRIPTION: Machine configuration for the Olimex A10-OLinuXino Lime Board, based on Allwinner A10 CPU
-#https://github.com/OLIMEX/OLINUXINO
-
-require conf/machine/include/sun4i.inc
-
-KERNEL_DEVICETREE = "sun4i-a10-olinuxino-lime.dtb"
-UBOOT_MACHINE = "A10-OLinuXino-Lime_config"
-SUNXI_FEX_FILE = "sys_config/a10/a10-olinuxino-lime.fex"

conf/machine/olinuxino-a10s.conf

@@ -1,10 +0,0 @@
-#@TYPE: Machine
-#@NAME: Olimex A10S-OLinuXino-MICRO Board
-#@DESCRIPTION: Machine configuration for Olimex A10S-OLinuXino-MICRO Board, based on Allwinner A10s CPU
-#https://github.com/OLIMEX/OLINUXINO
-
-require conf/machine/include/sun5i.inc
-
-KERNEL_DEVICETREE = "sun5i-a10s-olinuxino-micro.dtb"
-UBOOT_MACHINE = "A10s-OLinuXino-M_config"
-SUNXI_FEX_FILE = "sys_config/a10s/a10s-olinuxino-m.fex"

conf/machine/olinuxino-a13.conf

@@ -3,8 +3,36 @@
 #@DESCRIPTION: Machine configuration for the Olime A13-OLinuXino Board, base on allwinner a13 CPU
 #https://github.com/OLIMEX/OLINUXINO
 
-require conf/machine/include/sun5i.inc
+PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
+XSERVER = "xserver-xorg \
+	   xf86-input-tslib \
+	   tslib-calibrate \
+	   tslib-tests \
+           xf86-input-evdev \
+           xf86-input-mouse \
+           xf86-input-keyboard \
+	   xf86-video-fbdev \
+"
 
-KERNEL_DEVICETREE = "sun5i-a13-olinuxino.dtb"
-UBOOT_MACHINE = "A13-OLinuXino_config"
-SUNXI_FEX_FILE = "sys_config/a13/a13-olinuxino.fex"
+# Only has DVI connector for external screen
+GUI_MACHINE_CLASS = "bigscreen"
+
+require conf/machine/include/tune-cortexa8.inc
+
+PREFERRED_PROVIDER_virtual/kernel = "linux"
+PREFERRED_VERSION_linux-libc-headers = "3.0.8"
+
+KERNEL_IMAGETYPE = "uImage"
+
+UBOOT_MACHINE = "a13_olinuxino"
+UBOOT_ENTRYPOINT = "0x40008000"
+UBOOT_LOADADDRESS = "0x40008000"
+
+SPL_BINARY = "sunxi-spl.bin"
+
+IMAGE_FSTYPES += "tar.bz2 squashfs a10-sdimg"
+
+# Guesswork
+SERIAL_CONSOLE = "115200 ttyS0"
+
+MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"

conf/machine/olinuxino-a13som.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: Olimex A13-SOM
-#@DESCRIPTION: Machine configuration for the Olimex A13-SOM Evaluation Board, based on Allwinner A13 CPU
-#https://github.com/OLIMEX/SOM
-
-require conf/machine/include/sun5i.inc
-
-UBOOT_MACHINE = "OLIMEX-A13-SOM_config"
-SUNXI_FEX_FILE = "sys_config/a13/olimex_a13_som.fex"

conf/machine/olinuxino-a20.conf

@@ -1,10 +0,0 @@
-#@TYPE: Machine
-#@NAME: Olimex A20-OLinuXino Board
-#@DESCRIPTION: Machine configuration for the Olimex A20-OLinuXino Board, based on Allwinner A20 CPU
-#https://github.com/OLIMEX/OLINUXINO
-
-require conf/machine/include/sun7i.inc
-
-KERNEL_DEVICETREE = "sun7i-a20-olinuxino-micro.dtb"
-UBOOT_MACHINE = "A20-OLinuXino_MICRO_config"
-SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_micro.fex"

conf/machine/olinuxino-a20lime.conf

@@ -1,10 +0,0 @@
-#@TYPE: Machine
-#@NAME: Olimex A20-OLinuXino Lime (4GB) Board
-#@DESCRIPTION: Machine configuration for the Olimex A20-OLinuXino Lime Board, based on Allwinner A20 CPU
-#https://github.com/OLIMEX/OLINUXINO
-
-require conf/machine/include/sun7i.inc
-
-KERNEL_DEVICETREE = "sun7i-a20-olinuxino-lime.dtb"
-UBOOT_MACHINE = "A20-OLinuXino-Lime_config"
-SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_lime.fex"

conf/machine/olinuxino-a20lime2-emmc.conf

@@ -1,10 +0,0 @@
-#@TYPE: Machine
-#@NAME: Olimex A20-OLinuXino Lime2 Board with 4GB eMMC
-#@DESCRIPTION: Machine configuration for the Olimex A20-OLinuXino Lime2 Board with 4GB eMMC, based on Allwinner A20 CPU
-#https://github.com/OLIMEX/OLINUXINO
-
-require conf/machine/include/sun7i.inc
-
-KERNEL_DEVICETREE = "sun7i-a20-olinuxino-lime2-emmc.dtb"
-UBOOT_MACHINE = "A20-OLinuXino-Lime2-eMMC_config"
-SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_lime2.fex"

conf/machine/olinuxino-a20lime2.conf

@@ -1,10 +0,0 @@
-#@TYPE: Machine
-#@NAME: Olimex A20-OLinuXino Lime2 (4GB) Board
-#@DESCRIPTION: Machine configuration for the Olimex A20-OLinuXino Lime2 Board, based on Allwinner A20 CPU
-#https://github.com/OLIMEX/OLINUXINO
-
-require conf/machine/include/sun7i.inc
-
-KERNEL_DEVICETREE = "sun7i-a20-olinuxino-lime2.dtb"
-UBOOT_MACHINE = "A20-OLinuXino-Lime2_config"
-SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_lime2.fex"

conf/machine/olinuxino-a20som.conf

@@ -1,10 +0,0 @@
-#@TYPE: Machine
-#@NAME: Olimex A20-SOM
-#@DESCRIPTION: Machine configuration for the Olimex A20-SOM Evaluation Board, based on Allwinner A20 CPU
-#https://github.com/OLIMEX/SOM
-
-require conf/machine/include/sun7i.inc
-
-KERNEL_DEVICETREE = "sun7i-a20-olimex-som-evb.dtb"
-UBOOT_MACHINE = "A20-Olimex-SOM-EVB_config"
-SUNXI_FEX_FILE = "sys_config/a20/olimex_a20_som.fex"

conf/machine/olinuxino-a64.conf

@@ -1,13 +0,0 @@
-#@TYPE: Machine
-#@NAME: Olimex A64-OLinuXino Board
-#@DESCRIPTION: Machine configuration for the Olimex A64-OLinuXino Board, based on Allwinner A64 CPU
-#https://github.com/OLIMEX/OLINUXINO
-
-require conf/machine/include/sun50i.inc
-
-PREFFERED_VERSION_u-boot = "v2018.09%"
-
-MACHINE_EXTRA_RRECOMMENDS += " linux-firmware-rtl8723"
-
-KERNEL_DEVICETREE = "allwinner/sun50i-a64-olinuxino.dtb"
-UBOOT_MACHINE = "a64-olinuxino_defconfig"

conf/machine/orange-pi-one.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-one
-#@DESCRIPTION: Machine configuration for the orange-pi-one, base on allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-orangepi-one.dtb"
-UBOOT_MACHINE = "orangepi_one_defconfig"
-

conf/machine/orange-pi-pc-plus.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-pc-plus
-#@DESCRIPTION: Machine configuration for the orange-pi-pc-plus, base on allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc-plus.dtb"
-UBOOT_MACHINE = "orangepi_pc_plus_defconfig"
-

conf/machine/orange-pi-pc.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-one
-#@DESCRIPTION: Machine configuration for the orange-pi-one, base on allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc.dtb"
-UBOOT_MACHINE = "orangepi_pc_defconfig"
-

conf/machine/orange-pi-plus2e.conf

@@ -1,8 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-plus2e
-#@DESCRIPTION: Machine configuration for the orange-pi-plus2e, base on allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-orangepi-plus2e.dtb"
-UBOOT_MACHINE = "orangepi_plus2e_defconfig"

conf/machine/orange-pi-zero-plus2-h3.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-zero-plus2-h3
-#@DESCRIPTION: Machine configuration for the orange-pi-zero-plus2, based on Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-require conf/machine/include/hardware/ap6212a.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-orangepi-zero-plus2.dtb"
-UBOOT_MACHINE = "orangepi_zero_plus2_h3_defconfig"

conf/machine/orange-pi-zero-plus2.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-zero-plus2
-#@DESCRIPTION: Machine configuration for the orange-pi-zero-plus2, base on Allwinner H5 CPU
-
-require conf/machine/include/sun50i.inc
-require conf/machine/include/hardware/ap6212a.inc
-
-KERNEL_DEVICETREE = "allwinner/sun50i-h5-orangepi-zero-plus2.dtb"
-UBOOT_MACHINE = "orangepi_zero_plus2_defconfig"

conf/machine/orange-pi-zero.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-one
-#@DESCRIPTION: Machine configuration for the orange-pi-one, base on allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h2-plus-orangepi-zero.dtb"
-UBOOT_MACHINE = "orangepi_zero_defconfig"
-

conf/machine/pcduino.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: pcduino-lite-wifi
-#@DESCRIPTION: Machine configuration for the pcDuino-Lite-Wifi, base on allwinner a10 CPU
-
-require conf/machine/include/sun4i.inc
-
-KERNEL_DEVICETREE = "sun4i-a10-pcduino.dtb"
-UBOOT_MACHINE = "Linksprite_pcDuino_defconfig"
-SUNXI_FEX_FILE = "sys_config/a10/pcduino.fex"

conf/machine/pcduino3.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: Linksprite A20-pcduino3 Board
-#@DESCRIPTION: Machine configuration for the pcDuino 3, based on Allwinner A20 CPU
-
-require conf/machine/include/sun7i.inc
-
-KERNEL_DEVICETREE = "sun7i-a20-pcduino3.dtb"
-UBOOT_MACHINE = "Linksprite_pcDuino3_defconfig"
-SUNXI_FEX_FILE = "sys_config/a20/linksprite_pcduino3.fex"

conf/machine/pine64-plus.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: pine64-plus
-#@DESCRIPTION: Machine configuration for the pine64-plus, based on Allwinner A64 CPU
-
-
-require conf/machine/include/sun50i.inc
-
-KERNEL_DEVICETREE = "allwinner/sun50i-a64-pine64-plus.dtb"
-UBOOT_MACHINE = "pine64_plus_defconfig"

recipes-bsp/atf/atf-sunxi_git.bb

@@ -1,39 +0,0 @@
-inherit deploy
-
-DESCRIPTION = "ARM Trusted Firmware"
-LICENSE = "BSD"
-LIC_FILES_CHKSUM = "file://license.rst;md5=1dd070c98a281d18d9eefd938729b031"
-
-FILESEXTRAPATHS_append := "${THISDIR}/${PN}:"
-
-SRC_URI = " \
-        git://github.com/ARM-software/arm-trusted-firmware.git;nobranch=1 \
-        "
-SRCREV_sun50iw2 = "c390ecd6db5fadb054466a8d4168d9bbbff2fa95"
-SRCREV_sun50iw6 = "c390ecd6db5fadb054466a8d4168d9bbbff2fa95"
-SRCREV_sun50i = "c390ecd6db5fadb054466a8d4168d9bbbff2fa95"
-
-S = "${WORKDIR}/git"
-B = "${WORKDIR}/build"
-
-COMPATIBLE_MACHINE = "(sun50iw2|sun50iw6|sun50i)"
-
-PLATFORM_sun50iw2 = "sun50i_a64"
-PLATFORM_sun50i = "sun50i_a64"
-PLATFORM_sun50iw6 = "sun50i_h6"
-
-LDFLAGS[unexport] = "1"
-
-do_compile() {
-    oe_runmake -C ${S} BUILD_BASE=${B} \
-      CROSS_COMPILE=${TARGET_PREFIX} \
-      PLAT=${PLATFORM} \
-      bl31 \
-      all
-}
-
-do_deploy() {
-    install -D -p -m 0644 ${B}/${PLATFORM}/release/bl31.bin ${DEPLOYDIR}/bl31.bin
-}
-
-addtask deploy after do_compile

recipes-bsp/sunxi-board-fex/sunxi-board-fex.bb

@@ -1,47 +0,0 @@
-# Copyright (C) 2013 Tomas Novotny <novotny@rehivetech.com>
-# Released under BSD-2-Clause or MIT license
-DESCRIPTION = "Handler for Allwinner's FEX files"
-LICENSE = "CC0-1.0"
-LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/${LICENSE};md5=0ceb3372c9595f0a8067e55da801e4a1"
-DEPENDS = "sunxi-tools-native"
-PV = "1.1+git${SRCPV}"
-PR = "r0"
-
-COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
-
-SRC_URI = "git://github.com/linux-sunxi/sunxi-boards.git;protocol=git"
-# Increase PV with SRCREV change
-SRCREV = "496ef0fbd166cc2395daa76dd3c359357420963d"
-
-S = "${WORKDIR}/git"
-
-SUNXI_FEX_BIN_IMAGE = "fex-${MACHINE}-${PV}-${PR}.bin"
-SUNXI_FEX_BIN_IMAGE_SYMLINK = "fex-${MACHINE}.bin"
-SUNXI_FEX_BIN_IMAGE_SYMLINK_SIMPLE = "fex.bin"
-
-inherit deploy
-
-do_compile() {
-    fex2bin "${S}/${SUNXI_FEX_FILE}" > "${B}/${SUNXI_FEX_BIN_IMAGE}"
-}
-
-do_deploy() {
-    install -m 0644 ${B}/${SUNXI_FEX_BIN_IMAGE} ${DEPLOYDIR}/
-    cd ${DEPLOYDIR}
-    ln -sf ${SUNXI_FEX_BIN_IMAGE} ${SUNXI_FEX_BIN_IMAGE_SYMLINK}
-    ln -sf ${SUNXI_FEX_BIN_IMAGE} ${SUNXI_FEX_BIN_IMAGE_SYMLINK_SIMPLE}
-}
-addtask deploy before do_build after do_compile
-
-PACKAGES = ""
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-do_install[noexec] = "1"
-do_package[noexec] = "1"
-do_packagedata[noexec] = "1"
-do_package_write[noexec] = "1"
-do_package_write_ipk[noexec] = "1"
-do_package_write_rpm[noexec] = "1"
-do_package_write_deb[noexec] = "1"
-do_populate_sysroot[noexec] = "1"

recipes-bsp/u-boot/files/0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch

@@ -1,21 +0,0 @@
-From 6adb2ebdc4022c24497e9ee4dccab41d18e3105d Mon Sep 17 00:00:00 2001
-From: Florin Sarbu <florin@resin.io>
-Date: Wed, 12 Sep 2018 14:22:49 +0200
-Subject: [PATCH] nanopi_neo_air_defconfig: Enable eMMC support
-
-Upstream-status: Pending
-Signed-off-by: Florin Sarbu <florin@resin.io>
-
----
- configs/nanopi_neo_air_defconfig | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/configs/nanopi_neo_air_defconfig b/configs/nanopi_neo_air_defconfig
-index 5ad90ddd16..8b7a4eb45d 100644
---- a/configs/nanopi_neo_air_defconfig
-+++ b/configs/nanopi_neo_air_defconfig
-@@ -15,3 +15,4 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-neo-air"
- CONFIG_USB_EHCI_HCD=y
- CONFIG_USB_OHCI_HCD=y
- CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-+CONFIG_MMC_SUNXI_SLOT_EXTRA=2

recipes-bsp/u-boot/files/0002-Revert-sunxi-psci-avoid-error-address-of-packed-memb.patch

@@ -1,67 +0,0 @@
-From bb6f500c10cc8f5f31245626899e0732b7b287c5 Mon Sep 17 00:00:00 2001
-From: Marek Belisko <marek.belisko@open-nandra.com>
-Date: Wed, 19 Aug 2020 13:39:49 +0200
-Subject: [PATCH] Revert "sunxi: psci: avoid error address-of-packed-member"
-
-This reverts commit 9bd34a69a453d409792e08c00953ce8862145e65.
----
- arch/arm/cpu/armv7/sunxi/psci.c | 16 +++++-----------
- 1 file changed, 5 insertions(+), 11 deletions(-)
-
-diff --git a/arch/arm/cpu/armv7/sunxi/psci.c b/arch/arm/cpu/armv7/sunxi/psci.c
-index 5b68900..2c5d99e 100644
---- a/arch/arm/cpu/armv7/sunxi/psci.c
-+++ b/arch/arm/cpu/armv7/sunxi/psci.c
-@@ -75,7 +75,7 @@ static void __secure __mdelay(u32 ms)
- 	isb();
- }
- 
--static void __secure clamp_release(void __maybe_unused *clamp)
-+static void __secure clamp_release(u32 __maybe_unused *clamp)
- {
- #if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN7I) || \
- 	defined(CONFIG_MACH_SUN8I_H3) || \
-@@ -90,7 +90,7 @@ static void __secure clamp_release(void __maybe_unused *clamp)
- #endif
- }
- 
--static void __secure clamp_set(void __maybe_unused *clamp)
-+static void __secure clamp_set(u32 __maybe_unused *clamp)
- {
- #if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN7I) || \
- 	defined(CONFIG_MACH_SUN8I_H3) || \
-@@ -99,28 +99,22 @@ static void __secure clamp_set(void __maybe_unused *clamp)
- #endif
- }
- 
--static void __secure sunxi_power_switch(void *clamp, void *pwroff_ptr, bool on,
-+static void __secure sunxi_power_switch(u32 *clamp, u32 *pwroff, bool on,
- 					int cpu)
- {
--	u32 pwroff;
--
--	memcpy(&pwroff, pwroff_ptr, sizeof(u32));
--
- 	if (on) {
- 		/* Release power clamp */
- 		clamp_release(clamp);
- 
- 		/* Clear power gating */
--		clrbits_le32(&pwroff, BIT(cpu));
-+		clrbits_le32(pwroff, BIT(cpu));
- 	} else {
- 		/* Set power gating */
--		setbits_le32(&pwroff, BIT(cpu));
-+		setbits_le32(pwroff, BIT(cpu));
- 
- 		/* Activate power clamp */
- 		clamp_set(clamp);
- 	}
--
--	memcpy(pwroff_ptr, &pwroff, sizeof(u32));
- }
- 
- #ifdef CONFIG_MACH_SUN8I_R40
--- 
-2.7.4
-

recipes-bsp/u-boot/files/aarch64/boot.cmd

@@ -1,11 +0,0 @@
-# Default to (primary) SD
-rootdev=mmcblk0p2
-if itest.b *0x28 == 0x02 ; then
-	# U-Boot loaded from eMMC or secondary SD so use it for rootfs too
-	echo "U-boot loaded from eMMC or secondary SD"
-	rootdev=mmcblk1p2
-fi
-setenv bootargs console=${console} console=tty1 root=/dev/${rootdev} rootwait panic=10 ${extra}
-load mmc 0:1 ${fdt_addr_r} ${fdtfile}
-load mmc 0:1 ${kernel_addr_r} Image
-booti ${kernel_addr_r} - ${fdt_addr_r}

recipes-bsp/u-boot/files/arm/boot.cmd

@@ -1,11 +0,0 @@
-# Default to (primary) SD
-rootdev=mmcblk0p2
-if itest.b *0x28 == 0x02 ; then
-	# U-Boot loaded from eMMC or secondary SD so use it for rootfs too
-	echo "U-boot loaded from eMMC or secondary SD"
-	rootdev=mmcblk1p2
-fi
-setenv bootargs console=${console} console=tty1 root=/dev/${rootdev} rootwait panic=10 ${extra}
-load mmc 0:1 ${fdt_addr_r} ${fdtfile} || load mmc 0:1 ${fdt_addr_r} boot/${fdtfile}
-load mmc 0:1 ${kernel_addr_r} zImage || load mmc 0:1 ${kernel_addr_r} boot/zImage || load mmc 0:1 ${kernel_addr_r} uImage || load mmc 0:1 ${kernel_addr_r} boot/uImage
-bootz ${kernel_addr_r} - ${fdt_addr_r} || bootm ${kernel_addr_r} - ${fdt_addr_r}

recipes-bsp/u-boot/u-boot-sunxi.bb

@@ -1,42 +0,0 @@
-DESCRIPTION = "U-Boot port for sunxi"
-
-require recipes-bsp/u-boot/u-boot.inc
-
-LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://Licenses/gpl-2.0.txt;md5=b234ee4d69f5fce4486a80fdaf4a4263"
-
-# No patches for other machines yet
-
-COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
-
-DEFAULT_PREFERENCE_sun4i="1"
-DEFAULT_PREFERENCE_sun5i="1"
-DEFAULT_PREFERENCE_sun7i="1"
-
-# Sunxi U-Boot uses different names for some boards
-UBOOT_MACHINE_olinuxino-a20 = "A20-OLinuXino-Micro_config"
-UBOOT_MACHINE_olinuxino-a10s = "A10s-OLinuXino-Micro_config"
-UBOOT_MACHINE_meleg = "Mele_A1000G_config"
-
-SRC_URI = " \
-	git://github.com/linux-sunxi/u-boot-sunxi.git;protocol=git;branch=sunxi \
-	file://0001-gcc5-fixes.patch \
-	file://0002-gcc6-fixes.patch \
-	file://0003-No-gcc-version-specific-includes.patch \
-	"
-
-PE = "1"
-
-PV = "v2014.04+git${SRCPV}"
-# Corresponds 2014.04 in Makefile
-SRCREV = "ea1ac32bf76eb60baef474c2516fc431b381d952"
-
-S = "${WORKDIR}/git"
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-SPL_BINARY="u-boot-sunxi-with-spl.bin"
-
-do_configure () {
-    oe_runmake -C ${S} O=${B} ${UBOOT_MACHINE}
-}

recipes-bsp/u-boot/u-boot-sunxi/0001-gcc5-fixes.patch

@@ -1,197 +0,0 @@
-From a5e50d6fd7321d0bc60fda2db938c170d09f9dee Mon Sep 17 00:00:00 2001
-From: Trevor Woerner <twoerner@gmail.com>
-Date: Thu, 24 Sep 2015 22:36:02 -0400
-Subject: [PATCH] gcc5 fixes
-
-gcc5 is pickier about inline functions defined in headers.
-
-Signed-off-by: Trevor Woerner <twoerner@gmail.com>
----
- arch/arm/include/asm/io.h     | 12 ++++----
- common/board_f.c              | 18 ++++++------
- common/main.c                 |  2 +-
- include/linux/compiler-gcc5.h | 65 +++++++++++++++++++++++++++++++++++++++++++
- 4 files changed, 81 insertions(+), 16 deletions(-)
- create mode 100644 include/linux/compiler-gcc5.h
-
-diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
-index 6a1f05a..2f6925b 100644
---- a/arch/arm/include/asm/io.h
-+++ b/arch/arm/include/asm/io.h
-@@ -75,7 +75,7 @@ static inline phys_addr_t virt_to_phys(void * vaddr)
- #define __arch_putw(v,a)		(*(volatile unsigned short *)(a) = (v))
- #define __arch_putl(v,a)		(*(volatile unsigned int *)(a) = (v))
- 
--extern inline void __raw_writesb(unsigned long addr, const void *data,
-+static inline void __raw_writesb(unsigned long addr, const void *data,
- 				 int bytelen)
- {
- 	uint8_t *buf = (uint8_t *)data;
-@@ -83,7 +83,7 @@ extern inline void __raw_writesb(unsigned long addr, const void *data,
- 		__arch_putb(*buf++, addr);
- }
- 
--extern inline void __raw_writesw(unsigned long addr, const void *data,
-+static inline void __raw_writesw(unsigned long addr, const void *data,
- 				 int wordlen)
- {
- 	uint16_t *buf = (uint16_t *)data;
-@@ -91,7 +91,7 @@ extern inline void __raw_writesw(unsigned long addr, const void *data,
- 		__arch_putw(*buf++, addr);
- }
- 
--extern inline void __raw_writesl(unsigned long addr, const void *data,
-+static inline void __raw_writesl(unsigned long addr, const void *data,
- 				 int longlen)
- {
- 	uint32_t *buf = (uint32_t *)data;
-@@ -99,21 +99,21 @@ extern inline void __raw_writesl(unsigned long addr, const void *data,
- 		__arch_putl(*buf++, addr);
- }
- 
--extern inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
-+static inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
- {
- 	uint8_t *buf = (uint8_t *)data;
- 	while(bytelen--)
- 		*buf++ = __arch_getb(addr);
- }
- 
--extern inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
-+static inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
- {
- 	uint16_t *buf = (uint16_t *)data;
- 	while(wordlen--)
- 		*buf++ = __arch_getw(addr);
- }
- 
--extern inline void __raw_readsl(unsigned long addr, void *data, int longlen)
-+static inline void __raw_readsl(unsigned long addr, void *data, int longlen)
- {
- 	uint32_t *buf = (uint32_t *)data;
- 	while(longlen--)
-diff --git a/common/board_f.c b/common/board_f.c
-index f285bad..72b421c 100644
---- a/common/board_f.c
-+++ b/common/board_f.c
-@@ -78,24 +78,24 @@ DECLARE_GLOBAL_DATA_PTR;
-  ************************************************************************
-  * May be supplied by boards if desired
-  */
--inline void __coloured_LED_init(void) {}
-+void __coloured_LED_init(void) {}
- void coloured_LED_init(void)
- 	__attribute__((weak, alias("__coloured_LED_init")));
--inline void __red_led_on(void) {}
-+void __red_led_on(void) {}
- void red_led_on(void) __attribute__((weak, alias("__red_led_on")));
--inline void __red_led_off(void) {}
-+void __red_led_off(void) {}
- void red_led_off(void) __attribute__((weak, alias("__red_led_off")));
--inline void __green_led_on(void) {}
-+void __green_led_on(void) {}
- void green_led_on(void) __attribute__((weak, alias("__green_led_on")));
--inline void __green_led_off(void) {}
-+void __green_led_off(void) {}
- void green_led_off(void) __attribute__((weak, alias("__green_led_off")));
--inline void __yellow_led_on(void) {}
-+void __yellow_led_on(void) {}
- void yellow_led_on(void) __attribute__((weak, alias("__yellow_led_on")));
--inline void __yellow_led_off(void) {}
-+void __yellow_led_off(void) {}
- void yellow_led_off(void) __attribute__((weak, alias("__yellow_led_off")));
--inline void __blue_led_on(void) {}
-+void __blue_led_on(void) {}
- void blue_led_on(void) __attribute__((weak, alias("__blue_led_on")));
--inline void __blue_led_off(void) {}
-+void __blue_led_off(void) {}
- void blue_led_off(void) __attribute__((weak, alias("__blue_led_off")));
- 
- /*
-diff --git a/common/main.c b/common/main.c
-index 8b6f274..3312b90 100644
---- a/common/main.c
-+++ b/common/main.c
-@@ -27,7 +27,7 @@ DECLARE_GLOBAL_DATA_PTR;
- /*
-  * Board-specific Platform code can reimplement show_boot_progress () if needed
-  */
--void inline __show_boot_progress (int val) {}
-+void __show_boot_progress (int val) {}
- void show_boot_progress (int val) __attribute__((weak, alias("__show_boot_progress")));
- 
- #define MAX_DELAY_STOP_STR 32
-diff --git a/include/linux/compiler-gcc5.h b/include/linux/compiler-gcc5.h
-new file mode 100644
-index 0000000..c8c5659
---- /dev/null
-+++ b/include/linux/compiler-gcc5.h
-@@ -0,0 +1,65 @@
-+#ifndef __LINUX_COMPILER_H
-+#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
-+#endif
-+
-+#define __used				__attribute__((__used__))
-+#define __must_check			__attribute__((warn_unused_result))
-+#define __compiler_offsetof(a, b)	__builtin_offsetof(a, b)
-+
-+/* Mark functions as cold. gcc will assume any path leading to a call
-+   to them will be unlikely.  This means a lot of manual unlikely()s
-+   are unnecessary now for any paths leading to the usual suspects
-+   like BUG(), printk(), panic() etc. [but let's keep them for now for
-+   older compilers]
-+
-+   Early snapshots of gcc 4.3 don't support this and we can't detect this
-+   in the preprocessor, but we can live with this because they're unreleased.
-+   Maketime probing would be overkill here.
-+
-+   gcc also has a __attribute__((__hot__)) to move hot functions into
-+   a special section, but I don't see any sense in this right now in
-+   the kernel context */
-+#define __cold			__attribute__((__cold__))
-+
-+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
-+
-+#ifndef __CHECKER__
-+# define __compiletime_warning(message) __attribute__((warning(message)))
-+# define __compiletime_error(message) __attribute__((error(message)))
-+#endif /* __CHECKER__ */
-+
-+/*
-+ * Mark a position in code as unreachable.  This can be used to
-+ * suppress control flow warnings after asm blocks that transfer
-+ * control elsewhere.
-+ *
-+ * Early snapshots of gcc 4.5 don't support this and we can't detect
-+ * this in the preprocessor, but we can live with this because they're
-+ * unreleased.  Really, we need to have autoconf for the kernel.
-+ */
-+#define unreachable() __builtin_unreachable()
-+
-+/* Mark a function definition as prohibited from being cloned. */
-+#define __noclone	__attribute__((__noclone__))
-+
-+/*
-+ * Tell the optimizer that something else uses this function or variable.
-+ */
-+#define __visible __attribute__((externally_visible))
-+
-+/*
-+ * GCC 'asm goto' miscompiles certain code sequences:
-+ *
-+ *   http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
-+ *
-+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
-+ *
-+ * (asm goto is automatically volatile - the naming reflects this.)
-+ */
-+#define asm_volatile_goto(x...)	do { asm goto(x); asm (""); } while (0)
-+
-+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
-+#define __HAVE_BUILTIN_BSWAP32__
-+#define __HAVE_BUILTIN_BSWAP64__
-+#define __HAVE_BUILTIN_BSWAP16__
-+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
--- 
-2.6.0.rc3
-

recipes-bsp/u-boot/u-boot-sunxi/0002-gcc6-fixes.patch

@@ -1,69 +0,0 @@
-diff -urN git-ORIG/include/linux/compiler-gcc6.h git/include/linux/compiler-gcc6.h
---- git-ORIG/include/linux/compiler-gcc6.h	1969-12-31 19:00:00.000000000 -0500
-+++ git/include/linux/compiler-gcc6.h	2017-04-09 19:50:16.920945874 -0400
-@@ -0,0 +1,65 @@
-+#ifndef __LINUX_COMPILER_H
-+#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
-+#endif
-+
-+#define __used				__attribute__((__used__))
-+#define __must_check			__attribute__((warn_unused_result))
-+#define __compiler_offsetof(a, b)	__builtin_offsetof(a, b)
-+
-+/* Mark functions as cold. gcc will assume any path leading to a call
-+   to them will be unlikely.  This means a lot of manual unlikely()s
-+   are unnecessary now for any paths leading to the usual suspects
-+   like BUG(), printk(), panic() etc. [but let's keep them for now for
-+   older compilers]
-+
-+   Early snapshots of gcc 4.3 don't support this and we can't detect this
-+   in the preprocessor, but we can live with this because they're unreleased.
-+   Maketime probing would be overkill here.
-+
-+   gcc also has a __attribute__((__hot__)) to move hot functions into
-+   a special section, but I don't see any sense in this right now in
-+   the kernel context */
-+#define __cold			__attribute__((__cold__))
-+
-+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
-+
-+#ifndef __CHECKER__
-+# define __compiletime_warning(message) __attribute__((warning(message)))
-+# define __compiletime_error(message) __attribute__((error(message)))
-+#endif /* __CHECKER__ */
-+
-+/*
-+ * Mark a position in code as unreachable.  This can be used to
-+ * suppress control flow warnings after asm blocks that transfer
-+ * control elsewhere.
-+ *
-+ * Early snapshots of gcc 4.5 don't support this and we can't detect
-+ * this in the preprocessor, but we can live with this because they're
-+ * unreleased.  Really, we need to have autoconf for the kernel.
-+ */
-+#define unreachable() __builtin_unreachable()
-+
-+/* Mark a function definition as prohibited from being cloned. */
-+#define __noclone	__attribute__((__noclone__))
-+
-+/*
-+ * Tell the optimizer that something else uses this function or variable.
-+ */
-+#define __visible __attribute__((externally_visible))
-+
-+/*
-+ * GCC 'asm goto' miscompiles certain code sequences:
-+ *
-+ *   http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
-+ *
-+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
-+ *
-+ * (asm goto is automatically volatile - the naming reflects this.)
-+ */
-+#define asm_volatile_goto(x...)	do { asm goto(x); asm (""); } while (0)
-+
-+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
-+#define __HAVE_BUILTIN_BSWAP32__
-+#define __HAVE_BUILTIN_BSWAP64__
-+#define __HAVE_BUILTIN_BSWAP16__
-+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */

recipes-bsp/u-boot/u-boot-sunxi/0003-No-gcc-version-specific-includes.patch

@@ -1,24 +0,0 @@
-From bc4aa5814cbedbfaa1c79dfe7ea2571fee7f2d51 Mon Sep 17 00:00:00 2001
-From: Andrey Lebedev <andrey@lebedev.lt>
-Date: Wed, 22 Jan 2020 20:00:11 +0200
-Subject: [PATCH] No gcc version-specific includes
-
-In order to support gcc-5 and above. Fixes compilation errors like
-
-linux/compiler-gcc9.h: No such file or directory
----
- include/linux/compiler-gcc.h | 1 -
- 1 file changed, 1 deletion(-)
-
-diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
-index 9896e547b9..5f0bd65f3a 100644
---- a/include/linux/compiler-gcc.h
-+++ b/include/linux/compiler-gcc.h
-@@ -90,4 +90,3 @@
- #define __gcc_header(x) #x
- #define _gcc_header(x) __gcc_header(linux/compiler-gcc##x.h)
- #define gcc_header(x) _gcc_header(x)
--#include gcc_header(__GNUC__)
--- 
-2.20.1
-

recipes-bsp/u-boot/u-boot_%.bbappend

@@ -1,31 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
-
-DEPENDS += " bc-native dtc-native swig-native python3-native flex-native bison-native "
-DEPENDS_append_sun50i = " atf-sunxi "
-
-COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
-
-DEFAULT_PREFERENCE_sun4i="1"
-DEFAULT_PREFERENCE_sun5i="1"
-DEFAULT_PREFERENCE_sun7i="1"
-DEFAULT_PREFERENCE_sun8i="1"
-DEFAULT_PREFERENCE_sun50i="1"
-
-SRC_URI += " \
-           file://0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch \
-           file://boot.cmd \
-           "
-# fix booting issue on orange pi zero
-SRC_URI_append_orange-pi-zero = " file://0002-Revert-sunxi-psci-avoid-error-address-of-packed-memb.patch"
-
-UBOOT_ENV_SUFFIX = "scr"
-UBOOT_ENV = "boot"
-
-EXTRA_OEMAKE += ' HOSTLDSHARED="${BUILD_CC} -shared ${BUILD_LDFLAGS} ${BUILD_CFLAGS}" '
-EXTRA_OEMAKE_append_sun50i = " BL31=${DEPLOY_DIR_IMAGE}/bl31.bin "
-
-do_compile_sun50i[depends] += "atf-sunxi:do_deploy"
-
-do_compile_append() {
-    ${B}/tools/mkimage -C none -A arm -T script -d ${WORKDIR}/boot.cmd ${WORKDIR}/${UBOOT_ENV_BINARY}
-}

recipes-bsp/u-boot/u-boot_git.bb

@@ -0,0 +1,23 @@
+require recipes-bsp/u-boot/u-boot.inc
+
+LICENSE = "GPL"
+
+# No patches for other machines yet
+COMPATIBLE_MACHINE = "(mele|olinuxino-a13|cubieboard)"
+
+DEFAULT_PREFERENCE_mele= "1"
+DEFAULT_PREFERENCE_olinuxino-a13= "1"
+DEFAULT_PREFERENCE_cubieboard="1"
+
+SRC_URI = "git://github.com/linux-sunxi/u-boot-sunxi.git;protocol=git;branch=sunxi"
+
+SRCREV = "7aa9f04f571247a6bb999c168b49e09f05b86465"
+PR = "r5"
+
+LIC_FILES_CHKSUM = "file://COPYING;md5=1707d6db1d42237583f50183a5651ecb"
+
+S = "${WORKDIR}/git"
+
+do_install_prepend() {
+	cp ${S}/spl/sunxi-spl.bin ${S}
+}

recipes-devtools/python/files/olinuxino-a10/mapping.h

@@ -1,221 +0,0 @@
-/*
- *
- * This file is part of pyA10Lime.
- * mapping.h is python GPIO extension.
- *
- * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
- *
- * pyA10Lime is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MAPPING_H
-#define __MAPPING_H
-
-#include "gpio_lib.h"
-
-/**
-Structure that describe all gpio
-*/
-typedef struct _pin {
-    char name[10];          // The processor pin
-    int offset;             // Memory offset for the pin
-    int pin_number;         // Number on the connector
-}pin_t;
-
-typedef struct _gpio {
-    char connector_name[10];
-    pin_t pins[41];
-}gpio_t;
-
-
-gpio_t gpio[] = {
-    {"lcd",
-        {
-            {   "PD16", SUNXI_GPD(16),  5   },
-            {   "PD17", SUNXI_GPD(17),  6   },
-            {   "PD18", SUNXI_GPD(18),  7   },
-            {   "PD19", SUNXI_GPD(19),  8   },
-            {   "PD20", SUNXI_GPD(20),  9   },
-            {   "PD21", SUNXI_GPD(21),  10  },
-            {   "PD22", SUNXI_GPD(22),  11  },
-            {   "PD23", SUNXI_GPD(23),  12  },
-            {   "PD8",  SUNXI_GPD(8),   13  },
-            {   "PD9",  SUNXI_GPD(9),   14  },
-            {   "PD10", SUNXI_GPD(10),  15  },
-            {   "PD11", SUNXI_GPD(11),  16  },
-            {   "PD12", SUNXI_GPD(12),  17  },
-            {   "PD13", SUNXI_GPD(13),  18  },
-            {   "PD14", SUNXI_GPD(14),  19  },
-            {   "PD15", SUNXI_GPD(15),  20  },
-            {   "PD0",  SUNXI_GPD(0),   21  },
-            {   "PD1",  SUNXI_GPD(1),   22  },
-            {   "PD2",  SUNXI_GPD(2),   23  },
-            {   "PD3",  SUNXI_GPD(3),   24  },
-            {   "PD4",  SUNXI_GPD(4),   25  },
-            {   "PD5",  SUNXI_GPD(5),   26  },
-            {   "PD6",  SUNXI_GPD(6),   27  },
-            {   "PD7",  SUNXI_GPD(7),   28  },
-            {   "PD26", SUNXI_GPD(26),  29  },
-            {   "PD27", SUNXI_GPD(27),  30  },
-            {   "PD24", SUNXI_GPD(24),  31  },
-            {   "PD25", SUNXI_GPD(25),  32  },
-            {   "PH8",  SUNXI_GPH(8),   35  },
-            {   "PB2",  SUNXI_GPB(2),   36  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-    {"gpio1",
-        {
-            {   "PG0",  SUNXI_GPG(0),   5   },
-            {   "PG1",  SUNXI_GPG(1),   7   },
-            {   "PG2",  SUNXI_GPG(2),   9   },
-            {   "PG3",  SUNXI_GPG(3),   11  },
-            {   "PG4",  SUNXI_GPG(4),   13  },
-            {   "PG5",  SUNXI_GPG(5),   15  },
-            {   "PG6",  SUNXI_GPG(6),   17  },
-            {   "PG7",  SUNXI_GPG(7),   19  },
-            {   "PG8",  SUNXI_GPG(8),   21  },
-            {   "PG9",  SUNXI_GPG(9),   23  },
-            {   "PG10", SUNXI_GPG(10),  25  },
-            {   "PG11", SUNXI_GPG(11),  27  },
-            {   "PC3",  SUNXI_GPC(3),   29  },
-            {   "PC18", SUNXI_GPC(18),  31  },
-            {   "PC19", SUNXI_GPC(19),  33  },
-            {   "PC20", SUNXI_GPC(20),  35  },
-            {   "PC21", SUNXI_GPC(21),  37  },
-            {   "PC22", SUNXI_GPC(22),  39  },
-            {   "PC23", SUNXI_GPC(23),  40  },
-            {   "PC24", SUNXI_GPC(24),  38  },
-            {   "PB18", SUNXI_GPB(18),  36  },
-            {   "PB19", SUNXI_GPB(19),  34  },
-            {   "PB20", SUNXI_GPB(20),  32  },
-            {   "PB21", SUNXI_GPB(21),  30  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-    {"gpio2",
-        {
-            {   "PI0",  SUNXI_GPI(0),   9   },
-            {   "PI1",  SUNXI_GPI(1),   11  },
-            {   "PI2",  SUNXI_GPI(2),   13  },
-            {   "PI3",  SUNXI_GPI(3),   15  },
-            {   "PI4",  SUNXI_GPI(4),   17  },
-            {   "PI5",  SUNXI_GPI(5),   19  },
-            {   "PI6",  SUNXI_GPI(6),   21  },
-            {   "PI7",  SUNXI_GPI(7),   23  },
-            {   "PI8",  SUNXI_GPI(8),   25  },
-            {   "PI9",  SUNXI_GPI(9),   27  },
-            {   "PI10", SUNXI_GPI(10),  29  },
-            {   "PI11", SUNXI_GPI(11),  31  },
-            {   "PI12", SUNXI_GPI(12),  33  },
-            {   "PI13", SUNXI_GPI(13),  35  },
-            {   "PI14", SUNXI_GPI(14),  37  },
-            {   "PI15", SUNXI_GPI(15),  39  },
-            {   "PI16", SUNXI_GPI(16),  40  },
-            {   "PI17", SUNXI_GPI(17),  38  },
-            {   "PI18", SUNXI_GPI(18),  36  },
-            {   "PI19", SUNXI_GPI(19),  34  },
-            {   "PI20", SUNXI_GPI(20),  32  },
-            {   "PI21", SUNXI_GPI(21),  30  },
-            {   "PE0",  SUNXI_GPE(0),   6   },
-            {   "PE1",  SUNXI_GPE(1),   8   },
-            {   "PE2",  SUNXI_GPE(2),   10  },
-            {   "PE3",  SUNXI_GPE(3),   12  },
-            {   "PE4",  SUNXI_GPE(4),   14  },
-            {   "PE5",  SUNXI_GPE(5),   16  },
-            {   "PE6",  SUNXI_GPE(6),   18  },
-            {   "PE7",  SUNXI_GPE(7),   20  },
-            {   "PE8",  SUNXI_GPE(8),   22  },
-            {   "PE9",  SUNXI_GPE(9),   24  },
-            {   "PE10", SUNXI_GPE(10),  26  },
-            {   "PE11", SUNXI_GPE(11),  28  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-    {"gpio3",
-        {
-            {   "PH0",  SUNXI_GPH(0),   7   },
-            {   "PH7",  SUNXI_GPH(7),   9   },
-            {   "PH9",  SUNXI_GPH(9),   11  },
-            {   "PH10", SUNXI_GPH(10),  13  },
-            {   "PH11", SUNXI_GPH(11),  15  },
-            {   "PH12", SUNXI_GPH(12),  17  },
-            {   "PH13", SUNXI_GPH(13),  19  },
-            {   "PH14", SUNXI_GPH(14),  21  },
-            {   "PH15", SUNXI_GPH(15),  23  },
-            {   "PH16", SUNXI_GPH(16),  25  },
-            {   "PH17", SUNXI_GPH(17),  27  },
-            {   "PH18", SUNXI_GPH(18),  29  },
-            {   "PH19", SUNXI_GPH(19),  31  },
-            {   "PH20", SUNXI_GPH(20),  33  },
-            {   "PH21", SUNXI_GPH(21),  35  },
-            {   "PH22", SUNXI_GPH(22),  37  },
-            {   "PH23", SUNXI_GPH(23),  39  },
-            {   "PH24", SUNXI_GPH(24),  34  },
-            {   "PH25", SUNXI_GPH(25),  36  },
-            {   "PH26", SUNXI_GPH(26),  38  },
-            {   "PH27", SUNXI_GPH(27),  40  },
-            {   "PB3",  SUNXI_GPB(3),   6   },
-            {   "PB4",  SUNXI_GPB(4),   8   },
-            {   "PB5",  SUNXI_GPB(5),   10  },
-            {   "PB6",  SUNXI_GPB(6),   12  },
-            {   "PB7",  SUNXI_GPB(7),   14  },
-            {   "PB8",  SUNXI_GPB(8),   16  },
-            {   "PB10", SUNXI_GPB(10),  18  },
-            {   "PB11", SUNXI_GPB(11),  20  },
-            {   "PB12", SUNXI_GPB(12),  22  },
-            {   "PB13", SUNXI_GPB(13),  24  },
-            {   "PB14", SUNXI_GPB(14),  26  },
-            {   "PB15", SUNXI_GPB(15),  28  },
-            {   "PB16", SUNXI_GPB(16),  30  },
-            {   "PB17", SUNXI_GPB(17),  32  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-    {"gpio4",
-        {
-            {   "PC7",  SUNXI_GPC(7),   16  },
-            {   "PC16", SUNXI_GPC(16),  18  },
-            {   "PC17", SUNXI_GPC(17),  20  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-    {"led",
-        {
-            {   "PH2",  SUNXI_GPH(2),   1},
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-};
-
-#endif

recipes-devtools/python/files/olinuxino-a10lime/mapping.h

@@ -1,221 +0,0 @@
-/*
- *
- * This file is part of pyA10Lime.
- * mapping.h is python GPIO extension.
- *
- * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
- *
- * pyA10Lime is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MAPPING_H
-#define __MAPPING_H
-
-#include "gpio_lib.h"
-
-/**
-Structure that describe all gpio
-*/
-typedef struct _pin {
-    char name[10];          // The processor pin
-    int offset;             // Memory offset for the pin
-    int pin_number;         // Number on the connector
-}pin_t;
-
-typedef struct _gpio {
-    char connector_name[10];
-    pin_t pins[41];
-}gpio_t;
-
-
-gpio_t gpio[] = {
-    {"lcd",
-        {
-            {   "PD16", SUNXI_GPD(16),  5   },
-            {   "PD17", SUNXI_GPD(17),  6   },
-            {   "PD18", SUNXI_GPD(18),  7   },
-            {   "PD19", SUNXI_GPD(19),  8   },
-            {   "PD20", SUNXI_GPD(20),  9   },
-            {   "PD21", SUNXI_GPD(21),  10  },
-            {   "PD22", SUNXI_GPD(22),  11  },
-            {   "PD23", SUNXI_GPD(23),  12  },
-            {   "PD8",  SUNXI_GPD(8),   13  },
-            {   "PD9",  SUNXI_GPD(9),   14  },
-            {   "PD10", SUNXI_GPD(10),  15  },
-            {   "PD11", SUNXI_GPD(11),  16  },
-            {   "PD12", SUNXI_GPD(12),  17  },
-            {   "PD13", SUNXI_GPD(13),  18  },
-            {   "PD14", SUNXI_GPD(14),  19  },
-            {   "PD15", SUNXI_GPD(15),  20  },
-            {   "PD0",  SUNXI_GPD(0),   21  },
-            {   "PD1",  SUNXI_GPD(1),   22  },
-            {   "PD2",  SUNXI_GPD(2),   23  },
-            {   "PD3",  SUNXI_GPD(3),   24  },
-            {   "PD4",  SUNXI_GPD(4),   25  },
-            {   "PD5",  SUNXI_GPD(5),   26  },
-            {   "PD6",  SUNXI_GPD(6),   27  },
-            {   "PD7",  SUNXI_GPD(7),   28  },
-            {   "PD26", SUNXI_GPD(26),  29  },
-            {   "PD27", SUNXI_GPD(27),  30  },
-            {   "PD24", SUNXI_GPD(24),  31  },
-            {   "PD25", SUNXI_GPD(25),  32  },
-            {   "PH8",  SUNXI_GPH(8),   35  },
-            {   "PB2",  SUNXI_GPB(2),   36  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-    {"gpio1",
-        {
-            {   "PG0",  SUNXI_GPG(0),   5   },
-            {   "PG1",  SUNXI_GPG(1),   7   },
-            {   "PG2",  SUNXI_GPG(2),   9   },
-            {   "PG3",  SUNXI_GPG(3),   11  },
-            {   "PG4",  SUNXI_GPG(4),   13  },
-            {   "PG5",  SUNXI_GPG(5),   15  },
-            {   "PG6",  SUNXI_GPG(6),   17  },
-            {   "PG7",  SUNXI_GPG(7),   19  },
-            {   "PG8",  SUNXI_GPG(8),   21  },
-            {   "PG9",  SUNXI_GPG(9),   23  },
-            {   "PG10", SUNXI_GPG(10),  25  },
-            {   "PG11", SUNXI_GPG(11),  27  },
-            {   "PC3",  SUNXI_GPC(3),   29  },
-            {   "PC18", SUNXI_GPC(18),  31  },
-            {   "PC19", SUNXI_GPC(19),  33  },
-            {   "PC20", SUNXI_GPC(20),  35  },
-            {   "PC21", SUNXI_GPC(21),  37  },
-            {   "PC22", SUNXI_GPC(22),  39  },
-            {   "PC23", SUNXI_GPC(23),  40  },
-            {   "PC24", SUNXI_GPC(24),  38  },
-            {   "PB18", SUNXI_GPB(18),  36  },
-            {   "PB19", SUNXI_GPB(19),  34  },
-            {   "PB20", SUNXI_GPB(20),  32  },
-            {   "PB21", SUNXI_GPB(21),  30  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-    {"gpio2",
-        {
-            {   "PI0",  SUNXI_GPI(0),   9   },
-            {   "PI1",  SUNXI_GPI(1),   11  },
-            {   "PI2",  SUNXI_GPI(2),   13  },
-            {   "PI3",  SUNXI_GPI(3),   15  },
-            {   "PI4",  SUNXI_GPI(4),   17  },
-            {   "PI5",  SUNXI_GPI(5),   19  },
-            {   "PI6",  SUNXI_GPI(6),   21  },
-            {   "PI7",  SUNXI_GPI(7),   23  },
-            {   "PI8",  SUNXI_GPI(8),   25  },
-            {   "PI9",  SUNXI_GPI(9),   27  },
-            {   "PI10", SUNXI_GPI(10),  29  },
-            {   "PI11", SUNXI_GPI(11),  31  },
-            {   "PI12", SUNXI_GPI(12),  33  },
-            {   "PI13", SUNXI_GPI(13),  35  },
-            {   "PI14", SUNXI_GPI(14),  37  },
-            {   "PI15", SUNXI_GPI(15),  39  },
-            {   "PI16", SUNXI_GPI(16),  40  },
-            {   "PI17", SUNXI_GPI(17),  38  },
-            {   "PI18", SUNXI_GPI(18),  36  },
-            {   "PI19", SUNXI_GPI(19),  34  },
-            {   "PI20", SUNXI_GPI(20),  32  },
-            {   "PI21", SUNXI_GPI(21),  30  },
-            {   "PE0",  SUNXI_GPE(0),   6   },
-            {   "PE1",  SUNXI_GPE(1),   8   },
-            {   "PE2",  SUNXI_GPE(2),   10  },
-            {   "PE3",  SUNXI_GPE(3),   12  },
-            {   "PE4",  SUNXI_GPE(4),   14  },
-            {   "PE5",  SUNXI_GPE(5),   16  },
-            {   "PE6",  SUNXI_GPE(6),   18  },
-            {   "PE7",  SUNXI_GPE(7),   20  },
-            {   "PE8",  SUNXI_GPE(8),   22  },
-            {   "PE9",  SUNXI_GPE(9),   24  },
-            {   "PE10", SUNXI_GPE(10),  26  },
-            {   "PE11", SUNXI_GPE(11),  28  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-    {"gpio3",
-        {
-            {   "PH0",  SUNXI_GPH(0),   7   },
-            {   "PH7",  SUNXI_GPH(7),   9   },
-            {   "PH9",  SUNXI_GPH(9),   11  },
-            {   "PH10", SUNXI_GPH(10),  13  },
-            {   "PH11", SUNXI_GPH(11),  15  },
-            {   "PH12", SUNXI_GPH(12),  17  },
-            {   "PH13", SUNXI_GPH(13),  19  },
-            {   "PH14", SUNXI_GPH(14),  21  },
-            {   "PH15", SUNXI_GPH(15),  23  },
-            {   "PH16", SUNXI_GPH(16),  25  },
-            {   "PH17", SUNXI_GPH(17),  27  },
-            {   "PH18", SUNXI_GPH(18),  29  },
-            {   "PH19", SUNXI_GPH(19),  31  },
-            {   "PH20", SUNXI_GPH(20),  33  },
-            {   "PH21", SUNXI_GPH(21),  35  },
-            {   "PH22", SUNXI_GPH(22),  37  },
-            {   "PH23", SUNXI_GPH(23),  39  },
-            {   "PH24", SUNXI_GPH(24),  34  },
-            {   "PH25", SUNXI_GPH(25),  36  },
-            {   "PH26", SUNXI_GPH(26),  38  },
-            {   "PH27", SUNXI_GPH(27),  40  },
-            {   "PB3",  SUNXI_GPB(3),   6   },
-            {   "PB4",  SUNXI_GPB(4),   8   },
-            {   "PB5",  SUNXI_GPB(5),   10  },
-            {   "PB6",  SUNXI_GPB(6),   12  },
-            {   "PB7",  SUNXI_GPB(7),   14  },
-            {   "PB8",  SUNXI_GPB(8),   16  },
-            {   "PB10", SUNXI_GPB(10),  18  },
-            {   "PB11", SUNXI_GPB(11),  20  },
-            {   "PB12", SUNXI_GPB(12),  22  },
-            {   "PB13", SUNXI_GPB(13),  24  },
-            {   "PB14", SUNXI_GPB(14),  26  },
-            {   "PB15", SUNXI_GPB(15),  28  },
-            {   "PB16", SUNXI_GPB(16),  30  },
-            {   "PB17", SUNXI_GPB(17),  32  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-    {"gpio4",
-        {
-            {   "PC7",  SUNXI_GPC(7),   16  },
-            {   "PC16", SUNXI_GPC(16),  18  },
-            {   "PC17", SUNXI_GPC(17),  20  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-    {"led",
-        {
-            {   "PH2",  SUNXI_GPH(2),   1},
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-};
-
-#endif

recipes-devtools/python/files/olinuxino-a13/mapping.h

@@ -1,146 +0,0 @@
-/*
- *
- * This file is part of pyA13.
- * mapping.h is python GPIO extension.
- *
- * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
- *
- * pyA13 is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MAPPING_H
-#define __MAPPING_H
-
-#include "gpio_lib.h"
-
-/**
-Structure that describe all gpio
-*/
-typedef struct _pin {
-    char name[10];          // The processor pin
-    int offset;             // Memory offset for the pin
-    int pin_number;         // Number on the connector
-}pin_t;
-
-typedef struct _gpio {
-    char connector_name[10];
-    pin_t pins[41];
-}gpio_t;
-
-
-gpio_t gpio[] = {
-    {"lcd",
-        {
-                {   "PD18", SUNXI_GPD(18),  5   },
-                {   "PD18", SUNXI_GPD(18),  6   },
-                {   "PD18", SUNXI_GPD(18),  7   },
-                {   "PD19", SUNXI_GPD(19),  8   },
-                {   "PD20", SUNXI_GPD(20),  9   },
-                {   "PD21", SUNXI_GPD(21),  10  },
-                {   "PD22", SUNXI_GPD(22),  11  },
-                {   "PD23", SUNXI_GPD(23),  12  },
-                {   "PD10", SUNXI_GPD(10),  13  },
-                {   "PD10", SUNXI_GPD(10),  14  },
-                {   "PD10", SUNXI_GPD(10),  15  },
-                {   "PD11", SUNXI_GPD(11),  16  },
-                {   "PD12", SUNXI_GPD(12),  17  },
-                {   "PD13", SUNXI_GPD(13),  18  },
-                {   "PD14", SUNXI_GPD(14),  19  },
-                {   "PD15", SUNXI_GPD(15),  20  },
-                {   "PD2",  SUNXI_GPD(2),   21  },
-                {   "PD2",  SUNXI_GPD(2),   22  },
-                {   "PD2",  SUNXI_GPD(2),   23  },
-                {   "PD3",  SUNXI_GPD(3),   24  },
-                {   "PD4",  SUNXI_GPD(4),   25  },
-                {   "PD5",  SUNXI_GPD(5),   26  },
-                {   "PD6",  SUNXI_GPD(6),   27  },
-                {   "PD7",  SUNXI_GPD(7),   28  },
-                {   "PD26", SUNXI_GPD(26),  29  },
-                {   "PD27", SUNXI_GPD(27),  30  },
-                {   "PD24", SUNXI_GPD(24),  31  },
-                {   "PD25", SUNXI_GPD(25),  32  },
-                {   "PB3",  SUNXI_GPB(3),   33  },
-                {   "PB4",  SUNXI_GPB(4),   34  },
-                {   "PB10", SUNXI_GPB(10),  35  },
-                {   "PB2",  SUNXI_GPB(2),   36  },
-                {
-                    {   0,  0,  0}
-                },
-        }
-    },
-    {"gpio2",
-        {
-            {   "PB0",  SUNXI_GPB(0),   5   },
-            {   "PG11", SUNXI_GPG(11),  6   },
-            {   "PB1",  SUNXI_GPB(1),   7   },
-            {   "PG10", SUNXI_GPG(10),  8   },
-            {   "PB2",  SUNXI_GPB(2),   9   },
-            {   "PG9",  SUNXI_GPG(9),   10  },
-            {   "PB3",  SUNXI_GPB(3),   11  },
-            {   "PE11", SUNXI_GPE(11),  12  },
-            {   "PB4",  SUNXI_GPB(4),   13  },
-            {   "PE10", SUNXI_GPE(10),  14  },
-            {   "PB10", SUNXI_GPB(10),  15  },
-            {   "PE9",  SUNXI_GPE(9),   16  },
-            {   "PB15", SUNXI_GPB(15),  17  },
-            {   "PE8",  SUNXI_GPE(8),   18  },
-            {   "PB16", SUNXI_GPB(16),  19  },
-            {   "PE7",  SUNXI_GPE(7),   20  },
-            {   "PC0",  SUNXI_GPC(0),   21  },
-            {   "PE6",  SUNXI_GPE(6),   22  },
-            {   "PC1",  SUNXI_GPC(1),   23  },
-            {   "PE5",  SUNXI_GPE(5),   24  },
-            {   "PC2",  SUNXI_GPC(2),   25  },
-            {   "PE4",  SUNXI_GPE(4),   26  },
-            {   "PC3",  SUNXI_GPC(3),   27  },
-            {   "PC19", SUNXI_GPC(19),  28  },
-            {   "PC4",  SUNXI_GPC(4),   29  },
-            {   "PC15", SUNXI_GPC(15),  30  },
-            {   "PC5",  SUNXI_GPC(5),   31  },
-            {   "PC14", SUNXI_GPC(14),  32  },
-            {   "PC6",  SUNXI_GPC(6),   33  },
-            {   "PC13", SUNXI_GPC(13),  34  },
-            {   "PC7",  SUNXI_GPC(7),   35  },
-            {   "PC12", SUNXI_GPC(12),  36  },
-            {   "PC8",  SUNXI_GPC(8),   37  },
-            {   "PC11", SUNXI_GPC(11),  38  },
-            {   "PC9",  SUNXI_GPC(9),   39  },
-            {   "PC10", SUNXI_GPC(10),  40  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-    {"uext",
-        {
-            {   "PG3",  SUNXI_GPG(3),   3   },
-            {   "PG3",  SUNXI_GPG(4),   4   },
-            {   "PB17", SUNXI_GPB(17),  5   },
-            {   "PB18", SUNXI_GPB(18),  6   },
-            {   "PE3",  SUNXI_GPE(3),   7   },
-            {   "PE2",  SUNXI_GPE(2),   8   },
-            {   "PE1",  SUNXI_GPE(1),   9   },
-            {   "PE0",  SUNXI_GPE(0),   10  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-};
-
-
-
-#endif

recipes-devtools/python/files/olinuxino-a13som/mapping.h

@@ -1,147 +0,0 @@
-/*
- *
- * This file is part of pyA13SOM.
- * mapping.h is python GPIO extension.
- *
- * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
- *
- * pyA13SOM is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MAPPING_H
-#define __MAPPING_H
-
-#include "gpio_lib.h"
-
-/**
-Structure that describe all gpio
-*/
-typedef struct _pin {
-    char name[10];          // The processor pin
-    int offset;             // Memory offset for the pin
-    int pin_number;         // Number on the connector
-}pin_t;
-
-typedef struct _gpio {
-    char connector_name[10];
-    pin_t pins[41];
-}gpio_t;
-
-
-gpio_t gpio[] = {
-    {"lcd",
-        {
-            {   "PD18", SUNXI_GPD(18),  5   },
-            {   "PD18", SUNXI_GPD(18),  6   },
-            {   "PD18", SUNXI_GPD(18),  7   },
-            {   "PD19", SUNXI_GPD(19),  8   },
-            {   "PD20", SUNXI_GPD(20),  9   },
-            {   "PD21", SUNXI_GPD(21),  10  },
-            {   "PD22", SUNXI_GPD(22),  11  },
-            {   "PD23", SUNXI_GPD(23),  12  },
-            {   "PD10", SUNXI_GPD(10),  13  },
-            {   "PD10", SUNXI_GPD(10),  14  },
-            {   "PD10", SUNXI_GPD(10),  15  },
-            {   "PD11", SUNXI_GPD(11),  16  },
-            {   "PD12", SUNXI_GPD(12),  17  },
-            {   "PD13", SUNXI_GPD(13),  18  },
-            {   "PD14", SUNXI_GPD(14),  19  },
-            {   "PD15", SUNXI_GPD(15),  20  },
-            {   "PD2",  SUNXI_GPD(2),   21  },
-            {   "PD2",  SUNXI_GPD(2),   22  },
-            {   "PD2",  SUNXI_GPD(2),   23  },
-            {   "PD3",  SUNXI_GPD(3),   24  },
-            {   "PD4",  SUNXI_GPD(4),   25  },
-            {   "PD5",  SUNXI_GPD(5),   26  },
-            {   "PD6",  SUNXI_GPD(6),   27  },
-            {   "PD7",  SUNXI_GPD(7),   28  },
-            {   "PD26", SUNXI_GPD(26),  29  },
-            {   "PD27", SUNXI_GPD(27),  30  },
-            {   "PD24", SUNXI_GPD(24),  31  },
-            {   "PD25", SUNXI_GPD(25),  32  },
-            {   "PB3",  SUNXI_GPB(3),   33  },
-            {   "PB4",  SUNXI_GPB(4),   34  },
-            {   "PB10", SUNXI_GPB(10),  35  },
-            {   "PB2",  SUNXI_GPB(2),   36  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-    {"gpio1",
-        {
-            {   "PB0",  SUNXI_GPB(0),   5   },
-            {   "PG11", SUNXI_GPG(11),  6   },
-            {   "PB1",  SUNXI_GPB(1),   7   },
-            {   "PG10", SUNXI_GPG(10),  8   },
-            {   "PB2",  SUNXI_GPB(2),   9   },
-            {   "PG9",  SUNXI_GPG(9),   10  },
-            {   "PB3",  SUNXI_GPB(3),   11  },
-            {   "PE11", SUNXI_GPE(11),  12  },
-            {   "PB4",  SUNXI_GPB(4),   13  },
-            {   "PE10", SUNXI_GPE(10),  14  },
-            {   "PB10", SUNXI_GPB(10),  15  },
-            {   "PE9",  SUNXI_GPE(9),   16  },
-            {   "PB15", SUNXI_GPB(15),  17  },
-            {   "PE8",  SUNXI_GPE(8),   18  },
-            {   "PB16", SUNXI_GPB(16),  19  },
-            {   "PE7",  SUNXI_GPE(7),   20  },
-            {   "PC0",  SUNXI_GPC(0),   21  },
-            {   "PE6",  SUNXI_GPE(6),   22  },
-            {   "PC1",  SUNXI_GPC(1),   23  },
-            {   "PE5",  SUNXI_GPE(5),   24  },
-            {   "PC2",  SUNXI_GPC(2),   25  },
-            {   "PE4",  SUNXI_GPE(4),   26  },
-            {   "PC3",  SUNXI_GPC(3),   27  },
-            {   "PC19", SUNXI_GPC(19),  28  },
-            {   "PC4",  SUNXI_GPC(4),   29  },
-            {   "PC15", SUNXI_GPC(15),  30  },
-            {   "PC5",  SUNXI_GPC(5),   31  },
-            {   "PC14", SUNXI_GPC(14),  32  },
-            {   "PC6",  SUNXI_GPC(6),   33  },
-            {   "PC13", SUNXI_GPC(13),  34  },
-            {   "PC7",  SUNXI_GPC(7),   35  },
-            {   "PC12", SUNXI_GPC(12),  36  },
-            {   "PC8",  SUNXI_GPC(8),   37  },
-            {   "PC11", SUNXI_GPC(11),  38  },
-            {   "PC9",  SUNXI_GPC(9),   39  },
-            {   "PC10", SUNXI_GPC(10),  40  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-    {"gpio3",
-        {
-            {   "PE0",  SUNXI_GPE(0),   1   },
-            {   "PG1",  SUNXI_GPG(1),   2   },
-            {   "PE1",  SUNXI_GPE(1),   3   },
-            {   "PG2",  SUNXI_GPG(2),   4   },
-            {   "PE2",  SUNXI_GPE(2),   5   },
-            {   "PG12", SUNXI_GPG(12),  6   },
-            {   "PE3",  SUNXI_GPE(3),   7   },
-            {   "PB17", SUNXI_GPB(17),  8   },
-            {   "PB18", SUNXI_GPB(18),  10  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-};
-
-
-
-#endif

recipes-devtools/python/files/olinuxino-a20/mapping.h

@@ -1,303 +0,0 @@
-/*
- *
- * This file is part of pyA20.
- * mapping.h is python GPIO extension.
- *
- * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
- *
- * pyA20 is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MAPPING_H
-#define __MAPPING_H
-
-#include "gpio_lib.h"
-
-/**
-Structure that describe all gpio
-*/
-typedef struct _pin {
-    char name[10];          // The processor pin
-    int offset;             // Memory offset for the pin
-    int pin_number;         // Number on the connector
-}pin_t;
-
-typedef struct _gpio {
-    char connector_name[10];
-    pin_t pins[41];
-}gpio_t;
-
-
-gpio_t gpio[] = {
-    {"lcd",
-        {
-                {   "PD16", SUNXI_GPD(16),  5   },
-                {   "PD17", SUNXI_GPD(17),  6   },
-                {   "PD18", SUNXI_GPD(18),  7   },
-                {   "PD19", SUNXI_GPD(19),  8   },
-                {   "PD20", SUNXI_GPD(20),  9   },
-                {   "PD21", SUNXI_GPD(21),  10  },
-                {   "PD22", SUNXI_GPD(22),  11  },
-                {   "PD23", SUNXI_GPD(23),  12  },
-                {   "PD8",  SUNXI_GPD(8),   13  },
-                {   "PD9",  SUNXI_GPD(9),   14  },
-                {   "PD10", SUNXI_GPD(10),  15  },
-                {   "PD11", SUNXI_GPD(11),  16  },
-                {   "PD12", SUNXI_GPD(12),  17  },
-                {   "PD13", SUNXI_GPD(13),  18  },
-                {   "PD14", SUNXI_GPD(14),  19  },
-                {   "PD15", SUNXI_GPD(15),  20  },
-                {   "PD0",  SUNXI_GPD(0),   21  },
-                {   "PD1",  SUNXI_GPD(1),   22  },
-                {   "PD2",  SUNXI_GPD(2),   23  },
-                {   "PD3",  SUNXI_GPD(3),   24  },
-                {   "PD4",  SUNXI_GPD(4),   25  },
-                {   "PD5",  SUNXI_GPD(5),   26  },
-                {   "PD6",  SUNXI_GPD(6),   27  },
-                {   "PD7",  SUNXI_GPD(7),   28  },
-                {   "PD26", SUNXI_GPD(26),  29  },
-                {   "PD27", SUNXI_GPD(27),  30  },
-                {   "PD24", SUNXI_GPD(24),  31  },
-                {   "PD25", SUNXI_GPD(25),  32  },
-                {   "PH8",  SUNXI_GPH(8),    35  },
-                {   "PB2",  SUNXI_GPB(2),   36  },
-                {
-                    {   0,  0,  0}
-                },
-        }
-    },
-    /*
-    #define PIN_PG0		SUNXI_GPG(0)
-#define PIN_PG1		SUNXI_GPG(1)
-#define PIN_PG2		SUNXI_GPG(2)
-#define PIN_PG3		SUNXI_GPG(3)
-#define PIN_PG4		SUNXI_GPG(4)
-#define PIN_PG5		SUNXI_GPG(5)
-#define PIN_PG6		SUNXI_GPG(6)
-#define PIN_PG7		SUNXI_GPG(7)
-#define PIN_PG8		SUNXI_GPG(8)
-#define PIN_PG9		SUNXI_GPG(9)
-#define PIN_PG10	SUNXI_GPG(10)
-#define PIN_PG11	SUNXI_GPG(11)
-*/  {"gpio1",
-        {
-            {   "PG0",  SUNXI_GPG(0),   5   },
-            {   "PG1",  SUNXI_GPG(0),   7   },
-            {   "PG2",  SUNXI_GPG(0),   9   },
-            {   "PG3",  SUNXI_GPG(0),   11  },
-            {   "PG4",  SUNXI_GPG(0),   13  },
-            {   "PG5",  SUNXI_GPG(0),   15  },
-            {   "PG6",  SUNXI_GPG(0),   17  },
-            {   "PG7",  SUNXI_GPG(0),   19  },
-            {   "PG8",  SUNXI_GPG(0),   21  },
-            {   "PG9",  SUNXI_GPG(0),   23  },
-            {   "PG10", SUNXI_GPG(0),   25  },
-            {   "PG11", SUNXI_GPG(0),   27  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-    /*
-    //GPIO 2
-#define PIN_PE0		SUNXI_GPE(0)
-#define PIN_PE1		SUNXI_GPE(1)
-#define PIN_PI0		SUNXI_GPI(0)
-#define PIN_PE2		SUNXI_GPE(2)
-#define PIN_PI1		SUNXI_GPI(1)
-#define PIN_PE3		SUNXI_GPE(3)
-#define PIN_PI2		SUNXI_GPI(2)
-#define PIN_PE4		SUNXI_GPE(4)
-#define PIN_PI3		SUNXI_GPI(3)
-#define PIN_PE5		SUNXI_GPE(5)
-#define PIN_PI10	SUNXI_GPI(10)
-#define PIN_PE6		SUNXI_GPE(6)
-#define PIN_PI11	SUNXI_GPI(11)
-#define PIN_PE7		SUNXI_GPE(7)
-#define PIN_PC3		SUNXI_GPC(3)
-#define PIN_PE8		SUNXI_GPE(8)
-#define PIN_PC7		SUNXI_GPC(7)
-#define PIN_PE9		SUNXI_GPE(9)
-#define PIN_PC16	SUNXI_GPC(16)
-#define PIN_PE10	SUNXI_GPE(10)
-#define PIN_PC17	SUNXI_GPC(17)
-#define PIN_PE11	SUNXI_GPE(11)
-#define PIN_PC18	SUNXI_GPC(18)
-#define PIN_PI14	SUNXI_GPI(14)
-#define PIN_PC23	SUNXI_GPC(23)
-#define PIN_PI15	SUNXI_GPI(15)
-#define PIN_PC24	SUNXI_GPC(24)
-#define PIN_PB23	SUNXI_GPB(23)
-#define PIN_PB22	SUNXI_GPB(22)
-*/
-    {"gpio2",
-        {
-            {   "PE0",  SUNXI_GPE(0),   6   },
-            {   "PE1",  SUNXI_GPE(1),   8   },
-            {   "PI0",  SUNXI_GPI(0),   9   },
-            {   "PE2",  SUNXI_GPE(2),   10  },
-            {   "PI1",  SUNXI_GPI(1),   11  },
-            {   "PE3",  SUNXI_GPE(3),   12  },
-            {   "PI2",  SUNXI_GPI(2),   13  },
-            {   "PE4",  SUNXI_GPE(4),   14  },
-            {   "PI3",  SUNXI_GPI(3),   15  },
-            {   "PE5",  SUNXI_GPE(5),   16  },
-            {   "PI10", SUNXI_GPI(10),  17  },
-            {   "PE6",  SUNXI_GPE(6),   18  },
-            {   "PI11", SUNXI_GPI(11),  19  },
-            {   "PE7",  SUNXI_GPE(7),   20  },
-            {   "PC3",  SUNXI_GPC(3),   21  },
-            {   "PE8",  SUNXI_GPE(8),   22  },
-            {   "PC7",  SUNXI_GPC(7),   23  },
-            {   "PE9",  SUNXI_GPE(9),   24  },
-            {   "PC16", SUNXI_GPC(16),  25  },
-            {   "PE10", SUNXI_GPE(10),  26  },
-            {   "PC17", SUNXI_GPC(17),  27  },
-            {   "PE11", SUNXI_GPE(11),  28  },
-            {   "PC18", SUNXI_GPC(18),  29  },
-            {   "PI14", SUNXI_GPI(14),  30  },
-            {   "PC23", SUNXI_GPC(23),  31  },
-            {   "PI15", SUNXI_GPI(15),  32  },
-            {   "PC24", SUNXI_GPC(24),  33  },
-            {   "PB23", SUNXI_GPB(23),  34  },
-            {   "PB22", SUNXI_GPB(22),  36  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-/*
-//GPIO 3
-#define PIN_PH0		SUNXI_GPH(0)
-#define PIN_PB3		SUNXI_GPB(3)
-#define PIN_PH2		SUNXI_GPH(2)
-#define PIN_PB4		SUNXI_GPB(4)
-#define PIN_PH7		SUNXI_GPH(7)
-#define PIN_PB5		SUNXI_GPB(5)
-#define PIN_PH9		SUNXI_GPH(9)
-#define PIN_PB6		SUNXI_GPB(6)
-#define PIN_PH10	SUNXI_GPH(10)
-#define PIN_PB7		SUNXI_GPB(7)
-#define PIN_PH11	SUNXI_GPH(11)
-#define PIN_PB8		SUNXI_GPB(8)
-#define PIN_PH12	SUNXI_GPH(12)
-#define PIN_PB10	SUNXI_GPB(10)
-#define PIN_PH13	SUNXI_GPH(13)
-#define PIN_PB11	SUNXI_GPB(11)
-#define PIN_PH14	SUNXI_GPH(14)
-#define PIN_PB12	SUNXI_GPB(12)
-#define PIN_PH15	SUNXI_GPH(15)
-#define PIN_PB13	SUNXI_GPB(13)
-#define PIN_PH16	SUNXI_GPH(16)
-#define PIN_PB14	SUNXI_GPB(14)
-#define PIN_PH17	SUNXI_GPH(17)
-#define PIN_PB15	SUNXI_GPB(15)
-#define PIN_PH18	SUNXI_GPH(18)
-#define PIN_PB16	SUNXI_GPB(16)
-#define PIN_PH19	SUNXI_GPH(19)
-#define PIN_PB17	SUNXI_GPB(17)
-#define PIN_PH20	SUNXI_GPH(20)
-#define PIN_PH24	SUNXI_GPH(24)
-#define PIN_PH21	SUNXI_GPH(21)
-#define PIN_PH25	SUNXI_GPH(25)
-#define PIN_PH22	SUNXI_GPH(22)
-#define PIN_PH26	SUNXI_GPH(26)
-#define PIN_PH23	SUNXI_GPH(23)
-#define PIN_PH27	SUNXI_GPH(27)
-*/
-    {"gpio3",
-        {
-            {   "PH0",  SUNXI_GPH(0),   5   },
-            {   "PB3",  SUNXI_GPB(3),   6   },
-            {   "PH2",  SUNXI_GPH(2),   7   },
-            {   "PB4",  SUNXI_GPB(4),   8   },
-            {   "PH7",  SUNXI_GPH(7),   9   },
-            {   "PB5",  SUNXI_GPB(5),   10  },
-            {   "PH9",  SUNXI_GPH(9),   11  },
-            {   "PB6",  SUNXI_GPB(6),   12  },
-            {   "PH10", SUNXI_GPH(10),  13  },
-            {   "PB7",  SUNXI_GPB(7),   14  },
-            {   "PH11", SUNXI_GPH(11),  15  },
-            {   "PB8",  SUNXI_GPB(8),   16  },
-            {   "PH12", SUNXI_GPH(12),  17  },
-            {   "PB10", SUNXI_GPB(10),  18  },
-            {   "PH13", SUNXI_GPH(13),  19  },
-            {   "PB11", SUNXI_GPB(11),  20  },
-            {   "PH14", SUNXI_GPH(14),  21  },
-            {   "PB12", SUNXI_GPB(12),  22  },
-            {   "PH15", SUNXI_GPH(15),  23  },
-            {   "PB13", SUNXI_GPB(13),  24  },
-            {   "PH16", SUNXI_GPH(16),  25  },
-            {   "PB14", SUNXI_GPB(14),  26  },
-            {   "PH17", SUNXI_GPH(17),  27  },
-            {   "PB15", SUNXI_GPB(15),  28  },
-            {   "PH18", SUNXI_GPH(18),  29  },
-            {   "PB16", SUNXI_GPB(16),  30  },
-            {   "PH19", SUNXI_GPH(19),  31  },
-            {   "PB17", SUNXI_GPB(17),  32  },
-            {   "PH20", SUNXI_GPH(20),  33  },
-            {   "PH24", SUNXI_GPH(24),  34  },
-            {   "PH21", SUNXI_GPH(21),  35  },
-            {   "PH25", SUNXI_GPH(25),  36  },
-            {   "PH22", SUNXI_GPH(22),  37  },
-            {   "PH26", SUNXI_GPH(26),  38  },
-            {   "PH23", SUNXI_GPH(23),  39  },
-            {   "PH27", SUNXI_GPH(27),  40  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-
-    {"uext1",
-        {
-            {   "PI12", SUNXI_GPI(12),   3   },
-            {   "PI13", SUNXI_GPI(13),   4   },
-            {   "PB20", SUNXI_GPB(20),   5   },
-            {   "PB21", SUNXI_GPB(21),   6   },
-            {   "PC22", SUNXI_GPC(22),   7   },
-            {   "PC21", SUNXI_GPC(21),   8   },
-            {   "PC20", SUNXI_GPC(20),   9   },
-            {   "PC19", SUNXI_GPC(19),   10  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-    {"uext2",
-        {
-            {   "PI20", SUNXI_GPI(20),   3   },
-            {   "PI21", SUNXI_GPI(21),   4   },
-            {   "PB18", SUNXI_GPB(18),   5   },
-            {   "PB19", SUNXI_GPB(19),   6   },
-            {   "PI19", SUNXI_GPI(19),   7   },
-            {   "PI18", SUNXI_GPI(18),   8   },
-            {   "PI17", SUNXI_GPI(17),   9   },
-            {   "PI16", SUNXI_GPI(16),   10  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-};
-
-
-
-#endif

recipes-devtools/python/files/olinuxino-a20lime/mapping.h

@@ -1,221 +0,0 @@
-/*
- *
- * This file is part of pyA20Lime.
- * mapping.h is python GPIO extension.
- *
- * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
- *
- * pyA20Lime is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MAPPING_H
-#define __MAPPING_H
-
-#include "gpio_lib.h"
-
-/**
-Structure that describe all gpio
-*/
-typedef struct _pin {
-    char name[10];          // The processor pin
-    int offset;             // Memory offset for the pin
-    int pin_number;         // Number on the connector
-}pin_t;
-
-typedef struct _gpio {
-    char connector_name[10];
-    pin_t pins[41];
-}gpio_t;
-
-
-gpio_t gpio[] = {
-    {"lcd",
-        {
-            {   "PD16", SUNXI_GPD(16),  5   },
-            {   "PD17", SUNXI_GPD(17),  6   },
-            {   "PD18", SUNXI_GPD(18),  7   },
-            {   "PD19", SUNXI_GPD(19),  8   },
-            {   "PD20", SUNXI_GPD(20),  9   },
-            {   "PD21", SUNXI_GPD(21),  10  },
-            {   "PD22", SUNXI_GPD(22),  11  },
-            {   "PD23", SUNXI_GPD(23),  12  },
-            {   "PD8",  SUNXI_GPD(8),   13  },
-            {   "PD9",  SUNXI_GPD(9),   14  },
-            {   "PD10", SUNXI_GPD(10),  15  },
-            {   "PD11", SUNXI_GPD(11),  16  },
-            {   "PD12", SUNXI_GPD(12),  17  },
-            {   "PD13", SUNXI_GPD(13),  18  },
-            {   "PD14", SUNXI_GPD(14),  19  },
-            {   "PD15", SUNXI_GPD(15),  20  },
-            {   "PD0",  SUNXI_GPD(0),   21  },
-            {   "PD1",  SUNXI_GPD(1),   22  },
-            {   "PD2",  SUNXI_GPD(2),   23  },
-            {   "PD3",  SUNXI_GPD(3),   24  },
-            {   "PD4",  SUNXI_GPD(4),   25  },
-            {   "PD5",  SUNXI_GPD(5),   26  },
-            {   "PD6",  SUNXI_GPD(6),   27  },
-            {   "PD7",  SUNXI_GPD(7),   28  },
-            {   "PD26", SUNXI_GPD(26),  29  },
-            {   "PD27", SUNXI_GPD(27),  30  },
-            {   "PD24", SUNXI_GPD(24),  31  },
-            {   "PD25", SUNXI_GPD(25),  32  },
-            {   "PH8",  SUNXI_GPH(8),   35  },
-            {   "PB2",  SUNXI_GPB(2),   36  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-    {"gpio1",
-        {
-            {   "PG0",  SUNXI_GPG(0),   5   },
-            {   "PG1",  SUNXI_GPG(1),   7   },
-            {   "PG2",  SUNXI_GPG(2),   9   },
-            {   "PG3",  SUNXI_GPG(3),   11  },
-            {   "PG4",  SUNXI_GPG(4),   13  },
-            {   "PG5",  SUNXI_GPG(5),   15  },
-            {   "PG6",  SUNXI_GPG(6),   17  },
-            {   "PG7",  SUNXI_GPG(7),   19  },
-            {   "PG8",  SUNXI_GPG(8),   21  },
-            {   "PG9",  SUNXI_GPG(9),   23  },
-            {   "PG10", SUNXI_GPG(10),  25  },
-            {   "PG11", SUNXI_GPG(11),  27  },
-            {   "PC3",  SUNXI_GPC(3),   29  },
-            {   "PC18", SUNXI_GPC(18),  31  },
-            {   "PC19", SUNXI_GPC(19),  33  },
-            {   "PC20", SUNXI_GPC(20),  35  },
-            {   "PC21", SUNXI_GPC(21),  37  },
-            {   "PC22", SUNXI_GPC(22),  39  },
-            {   "PC23", SUNXI_GPC(23),  40  },
-            {   "PC24", SUNXI_GPC(24),  38  },
-            {   "PB18", SUNXI_GPB(18),  36  },
-            {   "PB19", SUNXI_GPB(19),  34  },
-            {   "PB20", SUNXI_GPB(20),  32  },
-            {   "PB21", SUNXI_GPB(21),  30  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-    {"gpio2",
-        {
-            {   "PI0",  SUNXI_GPI(0),   9   },
-            {   "PI1",  SUNXI_GPI(1),   11  },
-            {   "PI2",  SUNXI_GPI(2),   13  },
-            {   "PI3",  SUNXI_GPI(3),   15  },
-            {   "PI4",  SUNXI_GPI(4),   17  },
-            {   "PI5",  SUNXI_GPI(5),   19  },
-            {   "PI6",  SUNXI_GPI(6),   21  },
-            {   "PI7",  SUNXI_GPI(7),   23  },
-            {   "PI8",  SUNXI_GPI(8),   25  },
-            {   "PI9",  SUNXI_GPI(9),   27  },
-            {   "PI10", SUNXI_GPI(10),  29  },
-            {   "PI11", SUNXI_GPI(11),  31  },
-            {   "PI12", SUNXI_GPI(12),  33  },
-            {   "PI13", SUNXI_GPI(13),  35  },
-            {   "PI14", SUNXI_GPI(14),  37  },
-            {   "PI15", SUNXI_GPI(15),  39  },
-            {   "PI16", SUNXI_GPI(16),  40  },
-            {   "PI17", SUNXI_GPI(17),  38  },
-            {   "PI18", SUNXI_GPI(18),  36  },
-            {   "PI19", SUNXI_GPI(19),  34  },
-            {   "PI20", SUNXI_GPI(20),  32  },
-            {   "PI21", SUNXI_GPI(21),  30  },
-            {   "PE0",  SUNXI_GPE(0),   6   },
-            {   "PE1",  SUNXI_GPE(1),   8   },
-            {   "PE2",  SUNXI_GPE(2),   10  },
-            {   "PE3",  SUNXI_GPE(3),   12  },
-            {   "PE4",  SUNXI_GPE(4),   14  },
-            {   "PE5",  SUNXI_GPE(5),   16  },
-            {   "PE6",  SUNXI_GPE(6),   18  },
-            {   "PE7",  SUNXI_GPE(7),   20  },
-            {   "PE8",  SUNXI_GPE(8),   22  },
-            {   "PE9",  SUNXI_GPE(9),   24  },
-            {   "PE10", SUNXI_GPE(10),  26  },
-            {   "PE11", SUNXI_GPE(11),  28  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-    {"gpio3",
-        {
-            {   "PH0",  SUNXI_GPH(0),   7   },
-            {   "PH7",  SUNXI_GPH(7),   9   },
-            {   "PH9",  SUNXI_GPH(9),   11  },
-            {   "PH10", SUNXI_GPH(10),  13  },
-            {   "PH11", SUNXI_GPH(11),  15  },
-            {   "PH12", SUNXI_GPH(12),  17  },
-            {   "PH13", SUNXI_GPH(13),  19  },
-            {   "PH14", SUNXI_GPH(14),  21  },
-            {   "PH15", SUNXI_GPH(15),  23  },
-            {   "PH16", SUNXI_GPH(16),  25  },
-            {   "PH17", SUNXI_GPH(17),  27  },
-            {   "PH18", SUNXI_GPH(18),  29  },
-            {   "PH19", SUNXI_GPH(19),  31  },
-            {   "PH20", SUNXI_GPH(20),  33  },
-            {   "PH21", SUNXI_GPH(21),  35  },
-            {   "PH22", SUNXI_GPH(22),  37  },
-            {   "PH23", SUNXI_GPH(23),  39  },
-            {   "PH24", SUNXI_GPH(24),  34  },
-            {   "PH25", SUNXI_GPH(25),  36  },
-            {   "PH26", SUNXI_GPH(26),  38  },
-            {   "PH27", SUNXI_GPH(27),  40  },
-            {   "PB3",  SUNXI_GPB(3),   6   },
-            {   "PB4",  SUNXI_GPB(4),   8   },
-            {   "PB5",  SUNXI_GPB(5),   10  },
-            {   "PB6",  SUNXI_GPB(6),   12  },
-            {   "PB7",  SUNXI_GPB(7),   14  },
-            {   "PB8",  SUNXI_GPB(8),   16  },
-            {   "PB10", SUNXI_GPB(10),  18  },
-            {   "PB11", SUNXI_GPB(11),  20  },
-            {   "PB12", SUNXI_GPB(12),  22  },
-            {   "PB13", SUNXI_GPB(13),  24  },
-            {   "PB14", SUNXI_GPB(14),  26  },
-            {   "PB15", SUNXI_GPB(15),  28  },
-            {   "PB16", SUNXI_GPB(16),  30  },
-            {   "PB17", SUNXI_GPB(17),  32  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-    {"gpio4",
-        {
-            {   "PC7",  SUNXI_GPC(7),   16  },
-            {   "PC16", SUNXI_GPC(16),  18  },
-            {   "PC17", SUNXI_GPC(17),  20  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-    {"led",
-        {
-            {   "PH2",  SUNXI_GPH(2),   1},
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-};
-
-#endif

recipes-devtools/python/files/olinuxino-a20lime2/mapping.h

@@ -1,224 +0,0 @@
-/*
- *
- * This file is part of pyA20Lime2.
- * mapping.h is python GPIO extension.
- *
- * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
- *
- * pyA20Lime2 is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MAPPING_H
-#define __MAPPING_H
-
-#include "gpio_lib.h"
-
-/**
-Structure that describe all gpio
-*/
-typedef struct _pin {
-    char name[10];          // The processor pin
-    int offset;             // Memory offset for the pin
-    int pin_number;         // Number on the connector
-}pin_t;
-
-typedef struct _gpio {
-    char connector_name[10];
-    pin_t pins[41];
-}gpio_t;
-
-
-gpio_t gpio[] = {
-    {"lcd",
-        {
-            {   "PD16", SUNXI_GPD(16),  5   },
-            {   "PD17", SUNXI_GPD(17),  6   },
-            {   "PD18", SUNXI_GPD(18),  7   },
-            {   "PD19", SUNXI_GPD(19),  8   },
-            {   "PD20", SUNXI_GPD(20),  9   },
-            {   "PD21", SUNXI_GPD(21),  10  },
-            {   "PD22", SUNXI_GPD(22),  11  },
-            {   "PD23", SUNXI_GPD(23),  12  },
-            {   "PD8",  SUNXI_GPD(8),   13  },
-            {   "PD9",  SUNXI_GPD(9),   14  },
-            {   "PD10", SUNXI_GPD(10),  15  },
-            {   "PD11", SUNXI_GPD(11),  16  },
-            {   "PD12", SUNXI_GPD(12),  17  },
-            {   "PD13", SUNXI_GPD(13),  18  },
-            {   "PD14", SUNXI_GPD(14),  19  },
-            {   "PD15", SUNXI_GPD(15),  20  },
-            {   "PD0",  SUNXI_GPD(0),   21  },
-            {   "PD1",  SUNXI_GPD(1),   22  },
-            {   "PD2",  SUNXI_GPD(2),   23  },
-            {   "PD3",  SUNXI_GPD(3),   24  },
-            {   "PD4",  SUNXI_GPD(4),   25  },
-            {   "PD5",  SUNXI_GPD(5),   26  },
-            {   "PD6",  SUNXI_GPD(6),   27  },
-            {   "PD7",  SUNXI_GPD(7),   28  },
-            {   "PD26", SUNXI_GPD(26),  29  },
-            {   "PD27", SUNXI_GPD(27),  30  },
-            {   "PD24", SUNXI_GPD(24),  31  },
-            {   "PD25", SUNXI_GPD(25),  32  },
-            {   "PH8",  SUNXI_GPH(8),   35  },
-            {   "PB2",  SUNXI_GPB(2),   36  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-    {"gpio1",
-        {
-            {   "PG0",  SUNXI_GPG(0),   5   },
-            {   "PG1",  SUNXI_GPG(1),   7   },
-            {   "PG2",  SUNXI_GPG(2),   9   },
-            {   "PG3",  SUNXI_GPG(3),   11  },
-            {   "PG4",  SUNXI_GPG(4),   13  },
-            {   "PG5",  SUNXI_GPG(5),   15  },
-            {   "PG6",  SUNXI_GPG(6),   17  },
-            {   "PG7",  SUNXI_GPG(7),   19  },
-            {   "PG8",  SUNXI_GPG(8),   21  },
-            {   "PG9",  SUNXI_GPG(9),   23  },
-            {   "PG10", SUNXI_GPG(10),  25  },
-            {   "PG11", SUNXI_GPG(11),  27  },
-            {   "PC3",  SUNXI_GPC(3),   29  },
-            {   "PC18", SUNXI_GPC(18),  31  },
-            {   "PC19", SUNXI_GPC(19),  33  },
-            {   "PC20", SUNXI_GPC(20),  35  },
-            {   "PC21", SUNXI_GPC(21),  37  },
-            {   "PC22", SUNXI_GPC(22),  39  },
-            {   "PC23", SUNXI_GPC(23),  40  },
-            {   "PC24", SUNXI_GPC(24),  38  },
-            {   "PB18", SUNXI_GPB(18),  36  },
-            {   "PB19", SUNXI_GPB(19),  34  },
-            {   "PB20", SUNXI_GPB(20),  32  },
-            {   "PB21", SUNXI_GPB(21),  30  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-    {"gpio2",
-        {
-            {   "PI0",  SUNXI_GPI(0),   9   },
-            {   "PI1",  SUNXI_GPI(1),   11  },
-            {   "PI2",  SUNXI_GPI(2),   13  },
-            {   "PI3",  SUNXI_GPI(3),   15  },
-            {   "PI4",  SUNXI_GPI(4),   17  },
-            {   "PI5",  SUNXI_GPI(5),   19  },
-            {   "PI6",  SUNXI_GPI(6),   21  },
-            {   "PI7",  SUNXI_GPI(7),   23  },
-            {   "PI8",  SUNXI_GPI(8),   25  },
-            {   "PI9",  SUNXI_GPI(9),   27  },
-            {   "PI10", SUNXI_GPI(10),  29  },
-            {   "PI11", SUNXI_GPI(11),  31  },
-            {   "PI12", SUNXI_GPI(12),  33  },
-            {   "PI13", SUNXI_GPI(13),  35  },
-            {   "PI14", SUNXI_GPI(14),  37  },
-            {   "PI15", SUNXI_GPI(15),  39  },
-            {   "PI16", SUNXI_GPI(16),  40  },
-            {   "PI17", SUNXI_GPI(17),  38  },
-            {   "PI18", SUNXI_GPI(18),  36  },
-            {   "PI19", SUNXI_GPI(19),  34  },
-            {   "PI20", SUNXI_GPI(20),  32  },
-            {   "PI21", SUNXI_GPI(21),  30  },
-            {   "PE0",  SUNXI_GPE(0),   6   },
-            {   "PE1",  SUNXI_GPE(1),   8   },
-            {   "PE2",  SUNXI_GPE(2),   10  },
-            {   "PE3",  SUNXI_GPE(3),   12  },
-            {   "PE4",  SUNXI_GPE(4),   14  },
-            {   "PE5",  SUNXI_GPE(5),   16  },
-            {   "PE6",  SUNXI_GPE(6),   18  },
-            {   "PE7",  SUNXI_GPE(7),   20  },
-            {   "PE8",  SUNXI_GPE(8),   22  },
-            {   "PE9",  SUNXI_GPE(9),   24  },
-            {   "PE10", SUNXI_GPE(10),  26  },
-            {   "PE11", SUNXI_GPE(11),  28  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-    {"gpio3",
-        {
-            {   "PH0",  SUNXI_GPH(0),   7   },
-            {   "PH7",  SUNXI_GPH(7),   9   },
-            {   "PH9",  SUNXI_GPH(9),   11  },
-            {   "PH10", SUNXI_GPH(10),  13  },
-            {   "PH11", SUNXI_GPH(11),  15  },
-            {   "PH12", SUNXI_GPH(12),  17  },
-            {   "PH13", SUNXI_GPH(13),  19  },
-            {   "PH14", SUNXI_GPH(14),  21  },
-            {   "PH15", SUNXI_GPH(15),  23  },
-            {   "PH16", SUNXI_GPH(16),  25  },
-            {   "PH17", SUNXI_GPH(17),  27  },
-            {   "PH18", SUNXI_GPH(18),  29  },
-            {   "PH19", SUNXI_GPH(19),  31  },
-            {   "PH20", SUNXI_GPH(20),  33  },
-            {   "PH21", SUNXI_GPH(21),  35  },
-            {   "PH22", SUNXI_GPH(22),  37  },
-            {   "PH23", SUNXI_GPH(23),  39  },
-            {   "PH24", SUNXI_GPH(24),  34  },
-            {   "PH25", SUNXI_GPH(25),  36  },
-            {   "PH26", SUNXI_GPH(26),  38  },
-            {   "PH27", SUNXI_GPH(27),  40  },
-            {   "PB3",  SUNXI_GPB(3),   4   },
-            {   "PB4",  SUNXI_GPB(4),   6   },
-            {   "PB5",  SUNXI_GPB(5),   8  },
-            {   "PB6",  SUNXI_GPB(6),   10  },
-            {   "PB7",  SUNXI_GPB(7),   12  },
-            {   "PB8",  SUNXI_GPB(8),   14  },
-            {   "PB9",  SUNXI_GPB(8),   16  },
-            {   "PB10", SUNXI_GPB(10),  18  },
-            {   "PB11", SUNXI_GPB(11),  20  },
-            {   "PB12", SUNXI_GPB(12),  22  },
-            {   "PB13", SUNXI_GPB(13),  24  },
-            {   "PB14", SUNXI_GPB(14),  26  },
-            {   "PB15", SUNXI_GPB(15),  28  },
-            {   "PB16", SUNXI_GPB(16),  30  },
-            {   "PB17", SUNXI_GPB(17),  32  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-    {"gpio4",
-        {
-            {   "PA9",  SUNXI_GPA(9),   12  },
-            {   "PA14", SUNXI_GPA(14),  14  },
-            {   "PC7",  SUNXI_GPC(7),   16  },
-            {   "PC16", SUNXI_GPC(16),  18  },
-            {   "PC17", SUNXI_GPC(17),  20  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-    {"led",
-        {
-            {   "PH2",  SUNXI_GPH(2),   1},
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-};
-
-#endif

recipes-devtools/python/files/olinuxino-a20som/mapping.h

@@ -1,265 +0,0 @@
-/*
- *
- * This file is part of pyA20SOM.
- * mapping.h is python GPIO extension.
- *
- * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
- *
- * pyA20SOM is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __MAPPING_H
-#define __MAPPING_H
-
-#include "gpio_lib.h"
-
-/**
-Structure that describe all gpio
-*/
-typedef struct _pin {
-    char name[10];          // The processor pin
-    int offset;             // Memory offset for the pin
-    int pin_number;         // Number on the connector
-}pin_t;
-
-typedef struct _gpio {
-    char connector_name[10];
-    pin_t pins[41];
-}gpio_t;
-
-
-gpio_t gpio[] = {
-    {"lcd",
-        {
-            {   "PD16", SUNXI_GPD(16),  5   },
-            {   "PD17", SUNXI_GPD(17),  6   },
-            {   "PD18", SUNXI_GPD(18),  7   },
-            {   "PD19", SUNXI_GPD(19),  8   },
-            {   "PD20", SUNXI_GPD(20),  9   },
-            {   "PD21", SUNXI_GPD(21),  10  },
-            {   "PD22", SUNXI_GPD(22),  11  },
-            {   "PD23", SUNXI_GPD(23),  12  },
-            {   "PD8", SUNXI_GPD(8),    13  },
-            {   "PD9", SUNXI_GPD(9),    14  },
-            {   "PD10", SUNXI_GPD(10),  15  },
-            {   "PD11", SUNXI_GPD(11),  16  },
-            {   "PD12", SUNXI_GPD(12),  17  },
-            {   "PD13", SUNXI_GPD(13),  18  },
-            {   "PD14", SUNXI_GPD(14),  19  },
-            {   "PD15", SUNXI_GPD(15),  20  },
-            {   "PD0",  SUNXI_GPD(0),   21  },
-            {   "PD1",  SUNXI_GPD(1),   22  },
-            {   "PD2",  SUNXI_GPD(2),   23  },
-            {   "PD3",  SUNXI_GPD(3),   24  },
-            {   "PD4",  SUNXI_GPD(4),   25  },
-            {   "PD5",  SUNXI_GPD(5),   26  },
-            {   "PD6",  SUNXI_GPD(6),   27  },
-            {   "PD7",  SUNXI_GPD(7),   28  },
-            {   "PD26", SUNXI_GPD(26),  29  },
-            {   "PD27", SUNXI_GPD(27),  30  },
-            {   "PD24", SUNXI_GPD(24),  31  },
-            {   "PD25", SUNXI_GPD(25),  32  },
-            {   "PH7",  SUNXI_GPH(7),   35  },
-            {   "PB2",  SUNXI_GPB(2),   36  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-    {"gpio1",
-        {
-            {   "PB9",  SUNXI_GPB(9),   7   },
-            {   "PH5",  SUNXI_GPH(5),   9   },
-            {   "PH4",  SUNXI_GPH(4),   11  },
-            {   "PH6",  SUNXI_GPH(6),   13  },
-            {   "PH3",  SUNXI_GPH(3),   15  },
-            {   "PI0",  SUNXI_GPI(0),   29  },
-            {   "PI1",  SUNXI_GPI(1),   31  },
-            {   "PI2",  SUNXI_GPI(2),   33  },
-            {   "PI3",  SUNXI_GPI(3),   35  },
-            {   "PI10", SUNXI_GPI(10),  37  },
-            {   "PI11", SUNXI_GPI(11),  39  },
-            {   "PI14", SUNXI_GPI(14),  40  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-    {"gpio2",
-        {
-            {   "PB22", SUNXI_GPB(22),  21  },
-            {   "PB23", SUNXI_GPB(23),  22  },
-            {   "PA0",  SUNXI_GPA(0),   29  },
-            {   "PA1",  SUNXI_GPA(1),   27  },
-            {   "PA2",  SUNXI_GPA(2),   25  },
-            {   "PA3",  SUNXI_GPA(3),   23  },
-            {   "PA4",  SUNXI_GPA(4),   30  },
-            {   "PA5",  SUNXI_GPA(5),   28  },
-            {   "PA6",  SUNXI_GPA(6),   26  },
-            {   "PA7",  SUNXI_GPA(7),   24  },
-            {   "PA8",  SUNXI_GPA(8),   33  },
-            {   "PA9",  SUNXI_GPA(9),   35  },
-            {   "PA10", SUNXI_GPA(10),  31  },
-            {   "PA11", SUNXI_GPA(11),  37  },
-            {   "PA12", SUNXI_GPA(12),  39  },
-            {   "PA13", SUNXI_GPA(13),  32  },
-            {   "PA14", SUNXI_GPA(14),  34  },
-            {   "PA15", SUNXI_GPA(15),  36  },
-            {   "PA16", SUNXI_GPA(16),  38  },
-            {   "PA17", SUNXI_GPA(17),  40  },
-
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-    {"gpio3",
-        {
-            {   "PH0",  SUNXI_GPH(0),   5   },
-            {   "PH2",  SUNXI_GPH(2),   7   },
-            {   "PH8",  SUNXI_GPH(8),   9   },
-            {   "PH9",  SUNXI_GPH(9),   11  },
-            {   "PH10", SUNXI_GPH(10),  13  },
-            {   "PH11", SUNXI_GPH(11),  15  },
-            {   "PH12", SUNXI_GPH(12),  17  },
-            {   "PH13", SUNXI_GPH(13),  19  },
-            {   "PH14", SUNXI_GPH(14),  21  },
-            {   "PH15", SUNXI_GPH(15),  23  },
-            {   "PH16", SUNXI_GPH(16),  25  },
-            {   "PH17", SUNXI_GPH(17),  27  },
-            {   "PH18", SUNXI_GPH(18),  29  },
-            {   "PH19", SUNXI_GPH(19),  31  },
-            {   "PH20", SUNXI_GPH(20),  33  },
-            {   "PH21", SUNXI_GPH(21),  35  },
-            {   "PH22", SUNXI_GPH(22),  37  },
-            {   "PH23", SUNXI_GPH(23),  39  },
-
-            {   "PB3",  SUNXI_GPB(3),   6   },
-            {   "PB4",  SUNXI_GPB(4),   8   },
-            {   "PB5",  SUNXI_GPB(5),   10  },
-            {   "PB6",  SUNXI_GPB(6),   12  },
-            {   "PB7",  SUNXI_GPB(7),   14  },
-            {   "PB8",  SUNXI_GPB(8),   16  },
-            {   "PB10",  SUNXI_GPB(10), 18  },
-            {   "PB11",  SUNXI_GPB(11), 20  },
-            {   "PB12",  SUNXI_GPB(12), 22  },
-            {   "PB13",  SUNXI_GPB(13), 24  },
-            {   "PB14",  SUNXI_GPB(14), 26  },
-            {   "PB15",  SUNXI_GPB(15), 28  },
-            {   "PB16",  SUNXI_GPB(16), 30  },
-            {   "PB17",  SUNXI_GPB(17), 32  },
-            {   "PH24",  SUNXI_GPH(24), 34  },
-            {   "PH25",  SUNXI_GPH(25), 36  },
-            {   "PH26",  SUNXI_GPH(26), 38  },
-            {   "PH27",  SUNXI_GPH(27), 40  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-    {"gpio4",
-        {
-            {   "PB0",  SUNXI_GPB(0),   5   },
-            {   "PB1",  SUNXI_GPB(1),   7   },
-            {   "PE0",  SUNXI_GPE(0),   6   },
-            {   "PE1",  SUNXI_GPE(1),   8   },
-            {   "PE2",  SUNXI_GPE(2),   10  },
-            {   "PE3",  SUNXI_GPE(3),   12  },
-            {   "PE4",  SUNXI_GPE(4),   14  },
-            {   "PE5",  SUNXI_GPE(5),   16  },
-            {   "PE6",  SUNXI_GPE(0),   18  },
-            {   "PE7",  SUNXI_GPE(0),   9   },
-            {   "PE8",  SUNXI_GPE(0),   11  },
-            {   "PE9",  SUNXI_GPE(0),   13  },
-            {   "PE10", SUNXI_GPE(0),   15  },
-            {   "PE11", SUNXI_GPE(0),   17  },
-            {   "PI20", SUNXI_GPI(20),  19  },
-            {   "PI21", SUNXI_GPI(21),  20  },
-            {   "PB18",  SUNXI_GPB(18), 21  },
-            {   "PB19",  SUNXI_GPB(19), 22  },
-            {   "PI16",  SUNXI_GPI(16), 23  },
-            {   "PI17",  SUNXI_GPI(17), 24  },
-            {   "PI18",  SUNXI_GPI(18), 25  },
-            {   "PI19",  SUNXI_GPI(19), 26  },
-            {   "PI12",  SUNXI_GPI(12), 27  },
-            {   "PI13",  SUNXI_GPI(13), 28  },
-            {   "PB20",  SUNXI_GPB(20), 29  },
-            {   "PB21",  SUNXI_GPB(21), 30  },
-            {   "PC22",  SUNXI_GPC(22), 31  },
-            {   "PC21",  SUNXI_GPC(21), 32  },
-            {   "PC20",  SUNXI_GPC(20), 33  },
-            {   "PC19",  SUNXI_GPC(21), 34  },
-            {   "PI15",  SUNXI_GPI(15), 36  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-    {"gpio5",
-        {
-            {   "PG0",  SUNXI_GPG(0),   1   },
-            {   "PG1",  SUNXI_GPG(1),   3   },
-            {   "PG2",  SUNXI_GPG(2),   5   },
-            {   "PG3",  SUNXI_GPG(3),   7   },
-            {   "PG4",  SUNXI_GPG(4),   9   },
-            {   "PG5",  SUNXI_GPG(5),   11  },
-            {   "PG6",  SUNXI_GPG(6),   13  },
-            {   "PG7",  SUNXI_GPG(7),   15  },
-            {   "PG8",  SUNXI_GPG(8),   17  },
-            {   "PG9",  SUNXI_GPG(9),   19  },
-            {   "PG10", SUNXI_GPG(10),  21  },
-            {   "PG11", SUNXI_GPG(11),  23  },
-            {   "PC8",  SUNXI_GPC(8),   25  },
-            {   "PC9",  SUNXI_GPC(9),   27  },
-            {   "PC10", SUNXI_GPC(10),  29  },
-            {   "PC11", SUNXI_GPC(11),  31  },
-            {   "PC12", SUNXI_GPC(12),  33  },
-            {   "PC13", SUNXI_GPC(13),  35  },
-            {   "PC14", SUNXI_GPC(14),  37  },
-            {   "PC15", SUNXI_GPC(15),  39  },
-            {   "PI6",  SUNXI_GPI(6),   4   },
-            {   "PI7",  SUNXI_GPI(7),   6   },
-            {   "PI8",  SUNXI_GPI(8),   8   },
-            {   "PI9",  SUNXI_GPI(9),   10  },
-            {   "PI4",  SUNXI_GPI(4),   12  },
-            {   "PI5",  SUNXI_GPI(5),   14  },
-            {   "PC16", SUNXI_GPC(16),  16  },
-            {   "PC17", SUNXI_GPC(17),  18  },
-            {   "PC18", SUNXI_GPC(18),  20  },
-            {   "PC23", SUNXI_GPC(23),  22  },
-            {   "PC24", SUNXI_GPC(24),  24  },
-            {   "PC7",  SUNXI_GPC(7),   26  },
-            {   "PC6",  SUNXI_GPC(6),   28  },
-            {   "PC5",  SUNXI_GPC(5),   30  },
-            {   "PC3",  SUNXI_GPC(3),   32  },
-            {   "PC2",  SUNXI_GPC(2),   34  },
-            {   "PC1",  SUNXI_GPC(1),   36  },
-            {   "PC0",  SUNXI_GPC(0),   38  },
-            {   "PC4",  SUNXI_GPC(4),   40  },
-            {
-                {   0,  0,  0}
-            },
-        }
-    },
-
-};
-
-
-
-#endif

recipes-devtools/python/pya20_0.2.12.bb

@@ -1,23 +0,0 @@
-DESCRIPTION = "A module to control Allwinner GPIO,SPI and I2C channels"
-HOMEPAGE = "https://pypi.python.org/pypi/pyA20"
-SECTION = "devel/python"
-LICENSE = "GPLv3"
-LIC_FILES_CHKSUM = "file://PKG-INFO;md5=4e584373bb0f46ef1e423cb7df37847d"
-DEPENDS = "python3"
-
-# No GPIO mappings for other machines yet
-COMPATIBLE_MACHINE = "(olinuxino-a13|olinuxino-a10|olinuxino-a20|olinuxino-a10lime|olinuxino-a20lime|olinuxino-a20lime2|olinuxino-a13som|olinuxino-a20som)"
-
-SRC_URI = "https://pypi.python.org/packages/source/p/pyA20/pyA20-${PV}.tar.gz \
-           file://mapping.h \
-          "
-S = "${WORKDIR}/pyA20-${PV}"
-
-inherit distutils3
-
-do_compile_prepend() { 
-cp ${WORKDIR}/mapping.h ${S}/pyA20/gpio/mapping.h
-}
-
-SRC_URI[md5sum] = "cab03b4931199804603d1074f6d8f48f"
-SRC_URI[sha256sum] = "4bef559a9c5a4d648d9834bad996cf2805b20d6063b8051029ffdf9deda2b536"

recipes-graphics/libgles/sunxi-mali/0001-Add-EGLSyncKHR-EGLTimeKHR-and-GLChar-definition.patch

@@ -1,47 +0,0 @@
-From fcdde5440976bb2c204789e13313c4d77cb263b7 Mon Sep 17 00:00:00 2001
-From: Nicolas Aguirre <aguirre.nicolas@gmail.com>
-Date: Tue, 16 Jun 2015 23:06:29 +0200
-Subject: [PATCH] Add EGLSyncKHR EGLTimeKHR and GLChar definition
-
----
- include/EGL/eglext.h | 4 +++-
- include/GLES2/gl2.h  | 1 +
- 2 files changed, 4 insertions(+), 1 deletion(-)
-
-diff --git a/include/EGL/eglext.h b/include/EGL/eglext.h
-index 25cfcb8..ec482d8 100644
---- a/include/EGL/eglext.h
-+++ b/include/EGL/eglext.h
-@@ -36,7 +36,6 @@ extern "C" {
- /* Current version at http://www.khronos.org/registry/egl/ */
- /* $Revision: 7244 $ on $Date: 2009-01-20 17:06:59 -0800 (Tue, 20 Jan 2009) $ */
- #define EGL_EGLEXT_VERSION 3
--
- #ifndef EGL_KHR_config_attribs
- #define EGL_KHR_config_attribs 1
- #define EGL_CONFORMANT_KHR			0x3042	/* EGLConfig attribute */
-@@ -44,6 +43,9 @@ extern "C" {
- #define EGL_VG_ALPHA_FORMAT_PRE_BIT_KHR		0x0040	/* EGL_SURFACE_TYPE bitfield */
- #endif
- 
-+typedef void *EGLSyncKHR;
-+typedef uint64_t EGLTimeKHR;
-+
- #ifndef EGL_KHR_lock_surface
- #define EGL_KHR_lock_surface 1
- #define EGL_READ_SURFACE_BIT_KHR		0x0001	/* EGL_LOCK_USAGE_HINT_KHR bitfield */
-diff --git a/include/GLES2/gl2.h b/include/GLES2/gl2.h
-index 59e376c..90d96bb 100644
---- a/include/GLES2/gl2.h
-+++ b/include/GLES2/gl2.h
-@@ -32,6 +32,7 @@ typedef unsigned int     GLuint;
- typedef khronos_float_t  GLfloat;
- typedef khronos_float_t  GLclampf;
- typedef khronos_int32_t  GLfixed;
-+typedef char             GLchar;
- 
- /* GL types for handling large vertex buffer objects */
- typedef khronos_intptr_t GLintptr;
--- 
-1.9.1
-

recipes-graphics/libgles/sunxi-mali/0001-fix-test-build.patch

@@ -1,28 +0,0 @@
-From 054886253f4f559b351a94e1e6ebfd5eb504461f Mon Sep 17 00:00:00 2001
-From: Trevor Woerner <twoerner@gmail.com>
-Date: Thu, 24 Sep 2015 23:38:11 -0400
-Subject: [PATCH] fix test build
-
-Allow the test application to build and link successfully.
-
-Signed-off-by: Trevor Woerner <twoerner@gmail.com>
----
- test/Makefile | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/test/Makefile b/test/Makefile
-index 700416e..51481c9 100644
---- a/test/Makefile
-+++ b/test/Makefile
-@@ -5,7 +5,7 @@ CFLAGS ?= -Wall
- all: test
- 
- test: ../config.mk test.c
--	$(CC) $(CFLAGS) -o $@ test.c -lEGL -lGLESv2
-+	$(CC) $(CFLAGS) -I../include -L../../image/usr/lib -o $@ test.c -lEGL -lGLESv2 -lX11
- 
- clean:
- 	rm -f test
--- 
-2.6.0.rc3
-

recipes-graphics/libgles/sunxi-mali/0002-Add-missing-GLchar-definition.patch

@@ -1,136 +0,0 @@
-From 15d91ef25234ff402f4288273989693f2d402d9d Mon Sep 17 00:00:00 2001
-From: Raoul Hecky <raoul.hecky@gmail.com>
-Date: Fri, 10 Jan 2014 14:44:53 +0100
-Subject: [PATCH] Add missing GLchar definition, some gl/gles apps needs that
- to compile correctly
-
-Build pkg-config files for gles and egl and install them
-
-Fix .pc creation
-
-add correct driver version in .pc
----
- .gitignore          |  1 +
- Makefile            |  1 +
- Makefile.pc         | 21 +++++++++++++++++++++
- egl.pc.in           | 11 +++++++++++
- gles_cm.pc.in       | 11 +++++++++++
- glesv2.pc.in        | 11 +++++++++++
- include/GLES/gl.h   |  1 +
- include/GLES2/gl2.h |  1 +
- 8 files changed, 58 insertions(+)
- create mode 100644 Makefile.pc
- create mode 100644 egl.pc.in
- create mode 100644 gles_cm.pc.in
- create mode 100644 glesv2.pc.in
-
-diff --git a/.gitignore b/.gitignore
-index 6865abf..e8a3713 100644
---- a/.gitignore
-+++ b/.gitignore
-@@ -1,2 +1,3 @@
- config.mk
- *~
-+*.pc
-diff --git a/Makefile b/Makefile
-index 60d4a0f..94845ea 100644
---- a/Makefile
-+++ b/Makefile
-@@ -21,6 +21,7 @@ clean:
- install: config.mk
- 	$(MAKE) -C lib install
- 	$(MAKE) -C include install
-+	$(MAKE) -f Makefile.pc
- 
- test: config.mk
- 	$(MAKE) -C test test
-diff --git a/Makefile.pc b/Makefile.pc
-new file mode 100644
-index 0000000..01097fd
---- /dev/null
-+++ b/Makefile.pc
-@@ -0,0 +1,21 @@
-+include Makefile.setup
-+include config.mk
-+
-+all:
-+	echo "prefix=$(prefix)" > egl.pc
-+	cat egl.pc.in >> egl.pc
-+	sed -i "s/MVERSION/$MALI_VERSION/g" egl.pc
-+	echo "prefix=$(prefix)" > gles_cm.pc
-+	cat gles_cm.pc.in >> gles_cm.pc
-+	sed -i "s/MVERSION/$MALI_VERSION/g" gles_cm.pc
-+	echo "prefix=$(prefix)" > glesv2.pc
-+	cat glesv2.pc.in >> glesv2.pc
-+	sed -i "s/MVERSION/$MALI_VERSION/g" glesv2.pc
-+
-+install: egl.pc gles_cm.pc glesv2.pc
-+	$(MKDIR) $(libdir)/pkgconfig
-+	$(INSTALL_DATA) $^ $(libdir)/pkgconfig
-+
-+clean:
-+	$(RM) egl.pc gles_cm.pc glesv2.pc
-+
-diff --git a/egl.pc.in b/egl.pc.in
-new file mode 100644
-index 0000000..0697183
---- /dev/null
-+++ b/egl.pc.in
-@@ -0,0 +1,11 @@
-+exec_prefix=${prefix}
-+libdir=${prefix}/lib
-+includedir=${prefix}/include
-+
-+Name: egl
-+Description: Mali EGL library
-+Requires.private:
-+Version: MVERSION
-+Libs: -L${libdir} -lEGL
-+Libs.private: -lm -lpthread -ldl
-+Cflags: -I${includedir}
-diff --git a/gles_cm.pc.in b/gles_cm.pc.in
-new file mode 100644
-index 0000000..22bc348
---- /dev/null
-+++ b/gles_cm.pc.in
-@@ -0,0 +1,11 @@
-+exec_prefix=${prefix}
-+libdir=${prefix}/lib
-+includedir=${prefix}/include
-+
-+Name: gles_cm
-+Description: Mali OpenGL ES 1.1 CM library
-+Requires.private:
-+Version: MVERSION
-+Libs: -L${libdir} -lGLES_CM
-+Libs.private: -lm -lpthread -ldl
-+Cflags: -I${includedir}
-diff --git a/glesv2.pc.in b/glesv2.pc.in
-new file mode 100644
-index 0000000..efef2ed
---- /dev/null
-+++ b/glesv2.pc.in
-@@ -0,0 +1,11 @@
-+exec_prefix=${prefix}
-+libdir=${prefix}/lib
-+includedir=${prefix}/include
-+
-+Name: glesv2
-+Description: Mali OpenGL ES 2.0 library
-+Requires.private:
-+Version: MVERSION
-+Libs: -L${libdir} -lGLESv2
-+Libs.private: -lm -lpthread -ldl
-+Cflags: -I${includedir}
-diff --git a/include/GLES/gl.h b/include/GLES/gl.h
-index 858f394..a6bb591 100644
---- a/include/GLES/gl.h
-+++ b/include/GLES/gl.h
-@@ -29,6 +29,7 @@ typedef float  GLfloat;
- typedef float  GLclampf;
- typedef signed int  GLfixed;
- typedef signed int  GLclampx;
-+typedef char GLchar;
- 
- typedef int * GLintptr;
- typedef int *  GLsizeiptr;

recipes-graphics/libgles/sunxi-mali/0003-Fix-sed-to-replace-by-the-correct-var.patch

@@ -1,30 +0,0 @@
-From 95bbd40135f96b473d4c713317e485d0049580cd Mon Sep 17 00:00:00 2001
-From: Raoul Hecky <raoul.hecky@gmail.com>
-Date: Tue, 8 Apr 2014 08:10:12 +0200
-Subject: [PATCH] Fix sed to replace by the correct var
-
----
- Makefile.pc | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/Makefile.pc b/Makefile.pc
-index 01097fd..c51d18c 100644
---- a/Makefile.pc
-+++ b/Makefile.pc
-@@ -4,13 +4,13 @@ include config.mk
- all:
- 	echo "prefix=$(prefix)" > egl.pc
- 	cat egl.pc.in >> egl.pc
--	sed -i "s/MVERSION/$MALI_VERSION/g" egl.pc
-+	sed -i "s/MVERSION/${MALI_VERSION}/g" egl.pc
- 	echo "prefix=$(prefix)" > gles_cm.pc
- 	cat gles_cm.pc.in >> gles_cm.pc
--	sed -i "s/MVERSION/$MALI_VERSION/g" gles_cm.pc
-+	sed -i "s/MVERSION/${MALI_VERSION}/g" gles_cm.pc
- 	echo "prefix=$(prefix)" > glesv2.pc
- 	cat glesv2.pc.in >> glesv2.pc
--	sed -i "s/MVERSION/$MALI_VERSION/g" glesv2.pc
-+	sed -i "s/MVERSION/${MALI_VERSION}/g" glesv2.pc
- 
- install: egl.pc gles_cm.pc glesv2.pc
- 	$(MKDIR) $(libdir)/pkgconfig

recipes-graphics/libgles/sunxi-mali_git.bb

@@ -1,104 +0,0 @@
-DESCRIPTION = "libGLES for the A10/A13 Allwinner processor with Mali 400 (X11)"
-
-LICENSE = "Proprietary"
-LIC_FILES_CHKSUM = "file://README;md5=1b81a178e80ee888ee4571772699ab2c"
-
-COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i)"
-
-# These libraries shouldn't get installed in world builds unless something
-# explicitly depends upon them.
-EXCLUDE_FROM_WORLD = "1"
-PROVIDES = "virtual/libgles1 virtual/libgles2 virtual/egl"
-
-# There's only hardfp version available
-python __anonymous() {
-    tunes = d.getVar("TUNE_FEATURES", True)
-    if not tunes:
-        return
-    if "callconvention-hard" not in tunes:
-        pkgn = d.getVar("PN", True)
-        pkgv = d.getVar("PV", True)
-        raise bb.parse.SkipPackage("%s-%s ONLY supports hardfp mode for now" % (pkgn, pkgv))
-}
-
-SRCREV_pn-${PN} = "d343311efc8db166d8371b28494f0f27b6a58724"
-SRC_URI = "gitsm://github.com/linux-sunxi/sunxi-mali.git \
-           file://0001-Add-EGLSyncKHR-EGLTimeKHR-and-GLChar-definition.patch \
-           file://0002-Add-missing-GLchar-definition.patch \
-           file://0003-Fix-sed-to-replace-by-the-correct-var.patch \
-           file://0001-fix-test-build.patch \
-           "
-
-S = "${WORKDIR}/git"
-
-DEPENDS = "libdrm xorgproto libump patchelf-native"
-
-PACKAGECONFIG ??= "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'x11', '', d)} ${@bb.utils.contains('DISTRO_FEATURES', 'wayland', 'wayland', '', d)}"
-PACKAGECONFIG[wayland] = "EGL_TYPE=framebuffer,,,"
-PACKAGECONFIG[x11] = "EGL_TYPE=x11,,virtual/libx11 libxau libxdmcp libdri2,"
-
-# Inhibit warnings about files being stripped, we can't do anything about it.
-INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
-INHIBIT_PACKAGE_STRIP = "1"
-INHIBIT_SYSROOT_STRIP = "1"
-
-do_configure() {
-         DESTDIR=${D}/ VERSION=r3p0 ABI=armhf make ${EXTRA_OEMAKE} config
-}
-
-do_install() {
-    make -f Makefile.pc
-
-    # install headers
-    install -d -m 0755 ${D}${includedir}/EGL
-    install -m 0755 ${S}/include/EGL/*.h ${D}${includedir}/EGL/
-    install -d -m 0755 ${D}${includedir}/GLES
-    install -m 0755 ${S}/include/GLES/*.h ${D}${includedir}/GLES/
-    install -d -m 0755 ${D}${includedir}/GLES2
-    install -m 0755 ${S}/include/GLES2/*.h ${D}${includedir}/GLES2/
-    install -d -m 0755 ${D}${includedir}/KHR
-    install -m 0755 ${S}/include/KHR/*.h ${D}${includedir}/KHR/
-
-    # Copy the .pc files
-    install -d -m 0755 ${D}${libdir}/pkgconfig
-    install -m 0644 ${S}/egl.pc ${D}${libdir}/pkgconfig/
-    install -m 0644 ${S}/gles_cm.pc ${D}${libdir}/pkgconfig/
-    install -m 0644 ${S}/glesv2.pc ${D}${libdir}/pkgconfig/
-
-    install -d ${D}${libdir}
-    install -d ${D}${includedir}
-
-    make libdir=${D}${libdir}/ includedir=${D}${includedir}/ install
-    make libdir=${D}${libdir}/ includedir=${D}${includedir}/ install -C include
-    rm -f ${D}${includedir}/KHR/khrplatform.h
-
-    # Fix .so name and create symlinks, binary package provides .so wich can't be included directly in package without triggering the 'dev-so' QA check
-    # Packages like xf86-video-fbturbo dlopen() libUMP.so, so we do need to ship the .so files in ${PN}
-
-    mv ${D}${libdir}/libMali.so ${D}${libdir}/libMali.so.3
-    patchelf --set-soname libMali.so.3 ${D}${libdir}/libMali.so.3
-    ln -sf libMali.so.3 ${D}${libdir}/libMali.so
-
-    for flib in libEGL.so.1.4 libGLESv1_CM.so.1.1 libGLESv2.so.2.0 ; do
-        rm ${D}${libdir}/$flib
-        ln -sf libMali.so.3 ${D}${libdir}/$flib
-    done
-
-    DESTDIR=${D}/ VERSION=r3p0 ABI=armhf make ${EXTRA_OEMAKE} test
-    install -d ${D}${bindir}
-    install -m 0755 ${S}/test/test ${D}${bindir}/sunximali-test
-}
-
-# Packages like xf86-video-fbturbo dlopen() libUMP.so, so we do need to ship the .so files in ${PN}
-PACKAGES =+ "${PN}-test"
-
-RPROVIDES_${PN} += "libGLESv2.so libEGL.so libGLESv2.so libGLESv1_CM.so libMali.so"
-RDEPENDS_${PN}-test = "${PN}"
-
-FILES_${PN} += "${libdir}/lib*.so"
-FILES_${PN}-dev = "${includedir} ${libdir}/pkgconfig/*"
-FILES_${PN}-test = "${bindir}/sunximali-test"
-
-# These are closed binaries generated elsewhere so don't check ldflags & text relocations
-INSANE_SKIP_${PN} = "dev-so ldflags textrel"
-INSANE_SKIP_${PN}-test = "dev-so ldflags textrel"

recipes-graphics/libump/libump_git.bb

@@ -1,15 +0,0 @@
-DESCRIPTION = "Unified Memory Provider userspace API source code needed for xf86-video-mali compilation"
-
-LICENSE = "Apache-2"
-LIC_FILES_CHKSUM = "file://debian/copyright;md5=edf7fb6071cae7ec80d537a05ee17198"
-
-inherit autotools
-
-PV = "r4p0-00rel0+git${SRCPV}"
-SRCREV_pn-${PN} = "ec0680628744f30b8fac35e41a7bd8e23e59c39f"
-
-SRC_URI = "git://github.com/linux-sunxi/libump.git"
-
-S = "${WORKDIR}/git"
-
-

recipes-graphics/mesa/mesa_%.bbappend

@@ -1,5 +0,0 @@
-# Enable lima and panfrost Mesa drivers
-PACKAGECONFIG_append_use-mailine-graphics = " lima panfrost"
-# Enable KMS renderonly Mesa support
-# See https://cgit.freedesktop.org/mesa/mesa/commit/?id=2b780fe89300199f2334539aa1678e9b68f0434f
-GALLIUMDRIVERS_append_use-mailine-graphics = ",kmsro"

recipes-graphics/tslib/tslib/0001-Support-reading-coordinates-from-multitouch-devices.patch

@@ -0,0 +1,79 @@
+From c525c0b5d8eada982c99442454fcf7b8364e10b3 Mon Sep 17 00:00:00 2001
+From: Florian Boor <florian@kernelconcepts.de>
+Date: Fri, 1 Apr 2011 23:30:21 +0200
+Subject: [PATCH] Support reading coordinates from multitouch devices.
+
+Signed-off-by: Florian Boor <florian@kernelconcepts.de>
+Signed-off-by: Christopher Larson <kergoth@gmail.com>
+---
+ plugins/input-raw.c | 33 +++++++++++++++++++++++----------
+ 1 file changed, 23 insertions(+), 10 deletions(-)
+
+diff --git a/plugins/input-raw.c b/plugins/input-raw.c
+index 4396eab..1e48505 100644
+--- a/plugins/input-raw.c
++++ b/plugins/input-raw.c
+@@ -40,6 +40,11 @@
+ # define KEY_CNT (KEY_MAX+1)
+ #endif
+ 
++#ifndef ABS_MT_POSITION_X
++# define ABS_MT_POSITION_X       0x35    /* Center X ellipse position */
++# define ABS_MT_POSITION_Y       0x36    /* Center Y ellipse position */
++#endif
++
+ #include "tslib-private.h"
+ 
+ #define GRAB_EVENTS_WANTED	1
+@@ -160,16 +165,17 @@ static int ts_input_read(struct tslib_module_info *inf,
+ 				}
+ 				break;
+ 			case EV_SYN:
+-				/* Fill out a new complete event */
+-				if (pen_up) {
+-					samp->x = 0;
+-					samp->y = 0;
+-					samp->pressure = 0;
+-					pen_up = 0;
+-				} else {
+-					samp->x = i->current_x;
+-					samp->y = i->current_y;
+-					samp->pressure = i->current_p;
++				if (ev.code == SYN_REPORT) {
++					/* Fill out a new complete event */
++					if (pen_up) {
++						samp->x = 0;
++						samp->y = 0;
++						samp->pressure = 0;
++						pen_up = 0;
++					} else {
++						samp->x = i->current_x;
++						samp->y = i->current_y;
++						samp->pressure = i->current_p;
+ 				}
+ 				samp->tv = ev.time;
+ 	#ifdef DEBUG
+@@ -179,6 +185,7 @@ static int ts_input_read(struct tslib_module_info *inf,
+ 	#endif /* DEBUG */
+ 				samp++;
+ 				total++;
++				}
+ 				break;
+ 			case EV_ABS:
+ 				switch (ev.code) {
+@@ -188,6 +195,12 @@ static int ts_input_read(struct tslib_module_info *inf,
+ 				case ABS_Y:
+ 					i->current_y = ev.value;
+ 					break;
++				case ABS_MT_POSITION_X:
++					i->current_x = ev.value;
++					break;
++				case ABS_MT_POSITION_Y:
++					i->current_y = ev.value;
++					break;
+ 				case ABS_PRESSURE:
+ 					i->current_p = ev.value;
+ 					break;
+-- 
+1.8.1.4
+

recipes-graphics/tslib/tslib_1.1.bbappend.disabled

@@ -1,4 +0,0 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
-
-SRC_URI += "file://tslib.patch"
-

recipes-graphics/tslib/tslib_git.bbappend

@@ -0,0 +1,7 @@
+FILESEXTRAPATHS := "${THISDIR}/${PN}"
+
+PRINC := "${@int(PRINC) + 1}"
+
+SRC_URI += "file://0001-Support-reading-coordinates-from-multitouch-devices.patch \ 
+            file://tslib.patch"
+

recipes-graphics/xorg-xserver/libdri2_git.bb

@@ -1,17 +0,0 @@
-DESCRIPTION = "Library for the DRI2 extension to the X Window System"
-
-LICENSE = "MIT-X"
-LIC_FILES_CHKSUM = "file://COPYING;md5=827da9afab1f727f2a66574629e0f39c"
-
-DEPENDS = "libdrm libxext libxfixes xorgproto"
-
-PE = "1"
-PV = "1.0.0+git${SRCPV}"
-SRC_URI = "git://github.com/robclark/libdri2.git;protocol=http;branch=master"
-
-SRCREV_pn-${PN} = "4f1eef3183df2b270c3d5cbef07343ee5127a6a4"
-
-S = "${WORKDIR}/git"
-
-inherit autotools pkgconfig
-

recipes-graphics/xorg-xserver/xf86-video-fbturbo/20-fbturbo.conf

@@ -1,7 +0,0 @@
-Section "Device"
-        Identifier      "Allwinner A10/A13 FBDEV"
-        Driver          "fbturbo"
-        Option          "fbdev" "/dev/fb0"
-
-        Option          "SwapbuffersWait" "false"
-EndSection

recipes-graphics/xorg-xserver/xf86-video-fbturbo_git.bb

@@ -1,26 +0,0 @@
-require recipes-graphics/xorg-driver/xorg-driver-video.inc
-
-DESCRIPTION = "X.Org X server -- A10/A13 display driver"
-
-LICENSE = "MIT-X"
-LIC_FILES_CHKSUM = "file://COPYING;md5=f91dc3ee5ce59eb4b528e67e98a31266"
-
-DEPENDS += "sunxi-mali libump xorgproto"
-
-PE = "3"
-PV = "0.5.1+git${SRCPV}"
-SRCREV_pn-${PN} = "e094e3c8f9004ca3347694bd05b99d136e8621b9"
-
-SRC_URI = "git://github.com/ssvb/xf86-video-fbturbo.git;protocol=http;branch=master \
-           file://20-fbturbo.conf"
-
-S = "${WORKDIR}/git"
-
-CFLAGS += " -I${STAGING_INCDIR}/xorg "
-
-do_install_append() {
-    install -d ${D}${datadir}/X11/xorg.conf.d
-    install -m 0644 ${WORKDIR}/20-fbturbo.conf ${D}${datadir}/X11/xorg.conf.d
-}
-
-FILES_${PN} += "${datadir}/X11/xorg.conf.d/20-fbturbo.conf"

recipes-graphics/xorg-xserver/xorg-driver-video.inc

@@ -1,4 +0,0 @@
-include xorg-driver-common.inc
-
-DEPENDS =+ "renderproto videoproto xextproto fontsproto"
-

recipes-graphics/xorg-xserver/xserver-xf86-config/xorg.conf

@@ -0,0 +1,22 @@
+
+Section "Device"
+    Identifier    "Generic Fbdev Driver"
+    Driver        "fbdev"
+EndSection
+
+Section "Monitor"
+    Identifier    "Generic Monitor"
+    Option        "DPMS"
+EndSection
+
+Section "Screen"
+    Identifier    "Default Screen"
+    Device        "Generic Fbdev Driver"
+    Monitor        "Generic Monitor"
+    DefaultDepth    24
+EndSection
+
+Section "ServerLayout"
+    Identifier    "Default Layout"
+    Screen        "Default Screen"
+EndSection

recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend

@@ -1 +1,4 @@
-FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
+FILESEXTRAPATHS := "${THISDIR}/${PN}"
+
+PRINC := "${@int(PRINC) + 1}"
+

recipes-kernel/linux-firmware/linux-firmware_%.bbappend

@@ -1,13 +0,0 @@
-# The brcmfmac driver looks for NVRAM files using the first entry in board
-# compatible since kernel >= 5.0:
-# https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0ad4b55b2f29784f93875e6231bf57cd233624a2
-# We create a link to the AP6212 module NVRAM file so that firmware is
-# autodetected by the driver.
-# WARNING: The following commit is required for NVRAM files to be included in
-# linux-firmware-bcm43430 package:
-# http://git.openembedded.org/openembedded-core/commit/?id=dde0f79f32fa6bab045ef60199903f74c4cc3393
-do_install_append() {
-	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2.txt
-	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2-h3.txt
-	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt
-}

recipes-kernel/linux/linux-mainline.inc

@@ -1,32 +0,0 @@
-SECTION = "kernel"
-LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
-COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
-
-inherit kernel
-
-require linux.inc
-
-# Since we're not using git, this doesn't make a difference, but we need to fill
-# in something or kernel-yocto.bbclass will fail.
-KBRANCH ?= "master"
-
-DEPENDS += "rsync-native"
-
-# Pull in the devicetree files into the rootfs
-RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"
-
-KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
-
-S = "${WORKDIR}/linux-${PV}"
-
-SRC_URI = "https://www.kernel.org/pub/linux/kernel/v5.x/linux-${PV}.tar.xz \
-	file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
-	file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
-	file://defconfig \
-"
-
-SRC_URI_append_use-mailine-graphics = " file://drm.cfg"
-SRC_URI_append_bananapi = " file://axp20x.cfg"
-
-FILES_${KERNEL_PACKAGE_NAME}-base_append = " ${nonarch_base_libdir}/modules/${KERNEL_VERSION}/modules.builtin.modinfo"

recipes-kernel/linux/linux-mainline/0001-dts-orange-pi-zero-Add-wifi-support.patch

@@ -1,87 +0,0 @@
-diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
-index 84cd9c061..917986cce 100644
---- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
-+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
-@@ -80,13 +80,15 @@
- 		};
- 	};
- 
--	reg_vcc_wifi: reg_vcc_wifi {
-+	vdd_wifi: vdd_wifi {
- 		compatible = "regulator-fixed";
--		regulator-min-microvolt = <3300000>;
--		regulator-max-microvolt = <3300000>;
--		regulator-name = "vcc-wifi";
--		enable-active-high;
-+		regulator-name = "wifi";
-+		regulator-min-microvolt = <1800000>;
-+		regulator-max-microvolt = <1800000>;
- 		gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
-+		startup-delay-us = <70000>;
-+		enable-active-high;
-+
- 	};
- 
- 	reg_vdd_cpux: vdd-cpux-regulator {
-@@ -106,10 +108,12 @@
- 			  1300000 1>;
- 	};
- 
--	wifi_pwrseq: wifi_pwrseq {
-+	pwrseq_wifi: pwrseq_wifi {
- 		compatible = "mmc-pwrseq-simple";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&wifi_rst>;
- 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
--		post-power-on-delay-ms = <200>;
-+		post-power-on-delay-ms = <50>;
- 	};
- };
- 
-@@ -140,9 +144,11 @@
- };
- 
- &mmc1 {
--	vmmc-supply = <&reg_vcc_wifi>;
--	mmc-pwrseq = <&wifi_pwrseq>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	vqmmc-supply = <&vdd_wifi>;
-+	mmc-pwrseq = <&pwrseq_wifi>;
- 	bus-width = <4>;
-+	max-frequency = <16000000>;
- 	non-removable;
- 	status = "okay";
- 
-@@ -152,6 +158,13 @@
- 	 */
- 	xr819: sdio_wifi@1 {
- 		reg = <1>;
-+		compatible = "xradio,xr819";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&wifi_wake>;
-+		interrupt-parent = <&pio>;
-+		interrupts = <6 10 IRQ_TYPE_EDGE_RISING>;
-+		interrupt-names = "host-wake";
-+		local-mac-address = [dc 44 6d c0 ff ee];
- 	};
- };
- 
-@@ -208,3 +221,18 @@
- 	status = "okay";
- 	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
- };
-+
-+&pio {
-+	wifi_wake: wifi_wake {
-+		pins = "PG10";
-+		function = "gpio_in";
-+    };
-+};
-+
-+&r_pio {
-+	wifi_rst: wifi_rst {
-+		pins = "PL7";
-+		function = "gpio_out";
-+    };
-+};
-+

recipes-kernel/linux/linux-mainline/0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch

@@ -1,80 +0,0 @@
-From 4ca766a768e783ee5198f1935b7f46a5df9b4a35 Mon Sep 17 00:00:00 2001
-From: Jelle van der Waa <jelle@vdwaa.nl>
-Date: Tue, 23 Jan 2018 15:58:44 -0800
-Subject: [PATCH] ARM: dts: nanopi-neo-air: Add WiFi / eMMC
-
-Enable the WiFi (AP6212) chip and eMMC support for the NanoPi NEO Air.
-
-This patch was originally submitted by Jelle van der Waa. Martin Kelly
-modified it to compile on the latest kernel, fixed up some review
-comments from Maxime Ripard, and re-tested the patch.
-
-The patch has been reworked to add back eMMC support which has been left
-out at the last backport.
-
-Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
-Cc: linux-sunxi@googlegroups.com
-Cc: devicetree@vger.kernel.org
-Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
-Signed-off-by: Martin Kelly <mkelly@xevo.com>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
-Signed-off-by: Florin Sarbu <florin@resin.io>
----
- arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts | 34 +++++++++++++++++++++++++++
- 1 file changed, 34 insertions(+)
-
-diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
-index 03ff6f8..a9331fe 100644
---- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
-+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
-@@ -72,6 +72,11 @@
- 			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
- 		};
- 	};
-+
-+	wifi_pwrseq: wifi_pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-+	};
- };
- 
- &mmc0 {
-@@ -84,6 +89,35 @@
- 	status = "okay";
- };
- 
-+&mmc1 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc1_pins_a>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	vqmmc-supply = <&reg_vcc3v3>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+
-+	brcmf: bcrmf@1 {
-+		reg = <1>;
-+		compatible = "brcm,bcm4329-fmac";
-+		interrupt-parent = <&pio>;
-+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
-+		interrupt-names = "host-wake";
-+	};
-+};
-+
-+&mmc2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc2_8bit_pins>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	vqmmc-supply = <&reg_vcc3v3>;
-+	bus-width = <8>;
-+	non-removable;
-+	status = "okay";
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&uart0_pins_a>;
--- 
-2.11.0
-

recipes-kernel/linux/linux-mainline/aarch64/defconfig

@@ -1,619 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_AUDIT=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IRQ_TIME_ACCOUNTING=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_NUMA_BALANCING=y
-CONFIG_MEMCG=y
-CONFIG_MEMCG_SWAP=y
-CONFIG_BLK_CGROUP=y
-CONFIG_CGROUP_PIDS=y
-CONFIG_CGROUP_HUGETLB=y
-CONFIG_CPUSETS=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_CGROUP_PERF=y
-CONFIG_USER_NS=y
-CONFIG_SCHED_AUTOGROUP=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_PROFILING=y
-CONFIG_JUMP_LABEL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_ARCH_SUNXI=y
-CONFIG_ARCH_ALPINE=y
-CONFIG_ARCH_BCM2835=y
-CONFIG_ARCH_BCM_IPROC=y
-CONFIG_ARCH_BERLIN=y
-CONFIG_ARCH_BRCMSTB=y
-CONFIG_ARCH_EXYNOS=y
-CONFIG_ARCH_LAYERSCAPE=y
-CONFIG_ARCH_LG1K=y
-CONFIG_ARCH_HISI=y
-CONFIG_ARCH_MEDIATEK=y
-CONFIG_ARCH_MESON=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_ARCH_QCOM=y
-CONFIG_ARCH_ROCKCHIP=y
-CONFIG_ARCH_SEATTLE=y
-CONFIG_ARCH_RENESAS=y
-CONFIG_ARCH_R8A7795=y
-CONFIG_ARCH_R8A7796=y
-CONFIG_ARCH_STRATIX10=y
-CONFIG_ARCH_TEGRA=y
-CONFIG_ARCH_SPRD=y
-CONFIG_ARCH_THUNDER=y
-CONFIG_ARCH_THUNDER2=y
-CONFIG_ARCH_UNIPHIER=y
-CONFIG_ARCH_VEXPRESS=y
-CONFIG_ARCH_XGENE=y
-CONFIG_ARCH_ZX=y
-CONFIG_ARCH_ZYNQMP=y
-CONFIG_PCI=y
-CONFIG_HOTPLUG_PCI_PCIE=y
-CONFIG_PCI_IOV=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_HOTPLUG_PCI_ACPI=y
-CONFIG_PCI_LAYERSCAPE=y
-CONFIG_PCI_HISI=y
-CONFIG_PCIE_QCOM=y
-CONFIG_PCIE_KIRIN=y
-CONFIG_PCIE_ARMADA_8K=y
-CONFIG_PCI_AARDVARK=y
-CONFIG_PCIE_RCAR=y
-CONFIG_PCIE_ROCKCHIP=m
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_PCI_XGENE=y
-CONFIG_ARM64_VA_BITS_48=y
-CONFIG_SCHED_MC=y
-CONFIG_NUMA=y
-CONFIG_PREEMPT=y
-CONFIG_KSM=y
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_CMA=y
-CONFIG_SECCOMP=y
-CONFIG_KEXEC=y
-CONFIG_CRASH_DUMP=y
-CONFIG_XEN=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_COMPAT=y
-CONFIG_HIBERNATION=y
-CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
-CONFIG_ARM_CPUIDLE=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_ARM_BIG_LITTLE_CPUFREQ=y
-CONFIG_ARM_SCPI_CPUFREQ=y
-CONFIG_ACPI_CPPC_CPUFREQ=m
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IPV6=m
-CONFIG_NETFILTER=y
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
-CONFIG_NETFILTER_XT_TARGET_LOG=m
-CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_NAT=m
-CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_BRIDGE=m
-CONFIG_BRIDGE_VLAN_FILTERING=y
-CONFIG_VLAN_8021Q=m
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_VLAN_8021Q_MVRP=y
-CONFIG_BPF_JIT=y
-CONFIG_BT=m
-CONFIG_BT_HIDP=m
-# CONFIG_BT_HS is not set
-# CONFIG_BT_LE is not set
-CONFIG_BT_LEDS=y
-# CONFIG_BT_DEBUGFS is not set
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_LL=y
-CONFIG_WIRELESS=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WEXT_CORE=y
-CONFIG_WEXT_PROC=y
-CONFIG_WEXT_PRIV=y
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_MAC80211_LEDS=y
-CONFIG_RFKILL=m
-CONFIG_NET_9P=y
-CONFIG_NET_9P_VIRTIO=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_DMA_CMA=y
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_DENALI_DT=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=m
-CONFIG_VIRTIO_BLK=y
-CONFIG_BLK_DEV_NVME=m
-CONFIG_SRAM=y
-CONFIG_EEPROM_AT25=m
-# CONFIG_SCSI_PROC_FS is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_SAS_ATA=y
-CONFIG_SCSI_HISI_SAS=y
-CONFIG_SCSI_HISI_SAS_PCI=y
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_AHCI_CEVA=y
-CONFIG_AHCI_MVEBU=y
-CONFIG_AHCI_XGENE=y
-CONFIG_AHCI_QORIQ=y
-CONFIG_SATA_SIL24=y
-CONFIG_SATA_RCAR=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_PATA_OF_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_MACVLAN=m
-CONFIG_MACVTAP=m
-CONFIG_TUN=y
-CONFIG_VETH=m
-CONFIG_VIRTIO_NET=y
-CONFIG_AMD_XGBE=y
-CONFIG_NET_XGENE=y
-CONFIG_MACB=y
-CONFIG_HNS_DSAF=y
-CONFIG_HNS_ENET=y
-CONFIG_E1000E=y
-CONFIG_IGB=y
-CONFIG_IGBVF=y
-CONFIG_MVNETA=y
-CONFIG_MVPP2=y
-CONFIG_SKY2=y
-CONFIG_QCOM_EMAC=m
-CONFIG_RAVB=y
-CONFIG_SMC91X=y
-CONFIG_SMSC911X=y
-CONFIG_STMMAC_ETH=m
-CONFIG_MDIO_BUS_MUX_MMIOREG=y
-CONFIG_AT803X_PHY=m
-CONFIG_MARVELL_PHY=m
-CONFIG_MESON_GXL_PHY=m
-CONFIG_MICREL_PHY=y
-CONFIG_REALTEK_PHY=m
-CONFIG_ROCKCHIP_PHY=y
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_RTL8152=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_SR9800=m
-CONFIG_USB_NET_SMSC75XX=m
-CONFIG_USB_NET_SMSC95XX=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_BRCMFMAC=m
-CONFIG_WL18XX=m
-CONFIG_WLCORE_SDIO=m
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_ADC=m
-CONFIG_KEYBOARD_CROS_EC=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_PM8941_PWRKEY=y
-CONFIG_INPUT_HISI_POWERKEY=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_BCM2835AUX=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_MT6577=y
-CONFIG_SERIAL_8250_UNIPHIER=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_MESON=y
-CONFIG_SERIAL_MESON_CONSOLE=y
-CONFIG_SERIAL_SAMSUNG=y
-CONFIG_SERIAL_SAMSUNG_CONSOLE=y
-CONFIG_SERIAL_TEGRA=y
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=11
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_SERIAL_MSM=y
-CONFIG_SERIAL_MSM_CONSOLE=y
-CONFIG_SERIAL_XILINX_PS_UART=y
-CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
-CONFIG_SERIAL_MVEBU_UART=y
-CONFIG_SERIAL_DEV_BUS=y
-CONFIG_SERIAL_DEV_CTRL_TTYPORT=y
-CONFIG_VIRTIO_CONSOLE=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_MUX_PCA954x=y
-CONFIG_I2C_BCM2835=m
-CONFIG_I2C_DESIGNWARE_PLATFORM=y
-CONFIG_I2C_IMX=y
-CONFIG_I2C_MESON=y
-CONFIG_I2C_MV64XXX=y
-CONFIG_I2C_PXA=y
-CONFIG_I2C_QUP=y
-CONFIG_I2C_RK3X=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_I2C_TEGRA=y
-CONFIG_I2C_UNIPHIER_F=y
-CONFIG_I2C_RCAR=y
-CONFIG_I2C_CROS_EC_TUNNEL=y
-CONFIG_SPI=y
-CONFIG_SPI_MESON_SPICC=m
-CONFIG_SPI_MESON_SPIFC=m
-CONFIG_SPI_BCM2835=m
-CONFIG_SPI_BCM2835AUX=m
-CONFIG_SPI_ORION=y
-CONFIG_SPI_PL022=y
-CONFIG_SPI_QUP=y
-CONFIG_SPI_ROCKCHIP=y
-CONFIG_SPI_S3C64XX=y
-CONFIG_SPI_SPIDEV=m
-CONFIG_SPMI=y
-CONFIG_PINCTRL_IPQ8074=y
-CONFIG_PINCTRL_SINGLE=y
-CONFIG_PINCTRL_MAX77620=y
-CONFIG_PINCTRL_MSM8916=y
-CONFIG_PINCTRL_MSM8994=y
-CONFIG_PINCTRL_MSM8996=y
-CONFIG_PINCTRL_QDF2XXX=y
-CONFIG_PINCTRL_QCOM_SPMI_PMIC=y
-CONFIG_GPIO_DWAPB=y
-CONFIG_GPIO_PL061=y
-CONFIG_GPIO_RCAR=y
-CONFIG_GPIO_XGENE=y
-CONFIG_GPIO_XGENE_SB=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_GPIO_MAX77620=y
-CONFIG_POWER_RESET_MSM=y
-CONFIG_POWER_RESET_XGENE=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_SYSCON_REBOOT_MODE=y
-CONFIG_BATTERY_BQ27XXX=y
-CONFIG_SENSORS_ARM_SCPI=y
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_INA2XX=m
-CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y
-CONFIG_CPU_THERMAL=y
-CONFIG_THERMAL_EMULATION=y
-CONFIG_BRCMSTB_THERMAL=m
-CONFIG_EXYNOS_THERMAL=y
-CONFIG_ROCKCHIP_THERMAL=m
-CONFIG_WATCHDOG=y
-CONFIG_S3C2410_WATCHDOG=y
-CONFIG_MESON_GXBB_WATCHDOG=m
-CONFIG_MESON_WATCHDOG=m
-CONFIG_RENESAS_WDT=y
-CONFIG_UNIPHIER_WATCHDOG=y
-CONFIG_BCM2835_WDT=y
-CONFIG_MFD_AXP20X_RSB=y
-CONFIG_MFD_CROS_EC=y
-CONFIG_MFD_CROS_EC_I2C=y
-CONFIG_MFD_CROS_EC_SPI=y
-CONFIG_MFD_EXYNOS_LPASS=m
-CONFIG_MFD_HI6421_PMIC=y
-CONFIG_MFD_HI655X_PMIC=y
-CONFIG_MFD_MAX77620=y
-CONFIG_MFD_SPMI_PMIC=y
-CONFIG_MFD_RK808=y
-CONFIG_MFD_SEC_CORE=y
-CONFIG_REGULATOR_AXP20X=y
-CONFIG_REGULATOR_FAN53555=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_REGULATOR_HI6421V530=y
-CONFIG_REGULATOR_HI655X=y
-CONFIG_REGULATOR_MAX77620=y
-CONFIG_REGULATOR_PWM=y
-CONFIG_REGULATOR_QCOM_SMD_RPM=y
-CONFIG_REGULATOR_QCOM_SPMI=y
-CONFIG_REGULATOR_RK808=y
-CONFIG_REGULATOR_S2MPS11=y
-CONFIG_MEDIA_SUPPORT=m
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
-CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
-CONFIG_MEDIA_CONTROLLER=y
-CONFIG_MEDIA_RC_SUPPORT=y
-CONFIG_RC_CORE=m
-CONFIG_RC_DEVICES=y
-CONFIG_RC_DECODERS=y
-CONFIG_IR_MESON=m
-CONFIG_VIDEO_V4L2_SUBDEV_API=y
-# CONFIG_DVB_NET is not set
-CONFIG_V4L_MEM2MEM_DRIVERS=y
-CONFIG_VIDEO_SAMSUNG_S5P_JPEG=m
-CONFIG_VIDEO_SAMSUNG_S5P_MFC=m
-CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC=m
-CONFIG_VIDEO_RENESAS_FCP=m
-CONFIG_VIDEO_RENESAS_VSP1=m
-CONFIG_DRM=m
-CONFIG_DRM_NOUVEAU=m
-CONFIG_DRM_EXYNOS=m
-CONFIG_DRM_EXYNOS5433_DECON=y
-CONFIG_DRM_EXYNOS7_DECON=y
-CONFIG_DRM_EXYNOS_DSI=y
-# CONFIG_DRM_EXYNOS_DP is not set
-CONFIG_DRM_EXYNOS_HDMI=y
-CONFIG_DRM_EXYNOS_MIC=y
-CONFIG_DRM_ROCKCHIP=m
-CONFIG_ROCKCHIP_ANALOGIX_DP=y
-CONFIG_ROCKCHIP_CDN_DP=y
-CONFIG_ROCKCHIP_DW_HDMI=y
-CONFIG_ROCKCHIP_DW_MIPI_DSI=y
-CONFIG_ROCKCHIP_INNO_HDMI=y
-CONFIG_DRM_RCAR_DU=m
-CONFIG_DRM_RCAR_LVDS=y
-CONFIG_DRM_RCAR_VSP=y
-CONFIG_DRM_TEGRA=m
-CONFIG_DRM_PANEL_SIMPLE=m
-CONFIG_DRM_I2C_ADV7511=m
-CONFIG_DRM_VC4=m
-CONFIG_DRM_HISI_KIRIN=m
-CONFIG_DRM_MESON=m
-CONFIG_FB=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_BACKLIGHT_GENERIC=m
-CONFIG_BACKLIGHT_PWM=m
-CONFIG_BACKLIGHT_LP855X=m
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SOC=y
-CONFIG_SND_BCM2835_SOC_I2S=m
-CONFIG_SND_SOC_SAMSUNG=y
-CONFIG_SND_SOC_RCAR=m
-CONFIG_SND_SOC_AK4613=m
-CONFIG_SND_SIMPLE_CARD=y
-CONFIG_USB=y
-CONFIG_USB_OTG=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_TEGRA=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MSM=y
-CONFIG_USB_EHCI_EXYNOS=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_EXYNOS=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_RENESAS_USBHS=m
-CONFIG_USB_STORAGE=y
-CONFIG_USB_DWC3=y
-CONFIG_USB_DWC2=y
-CONFIG_USB_CHIPIDEA=y
-CONFIG_USB_CHIPIDEA_UDC=y
-CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_ISP1760=y
-CONFIG_USB_HSIC_USB3503=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_USB_MSM_OTG=y
-CONFIG_USB_QCOM_8X16_PHY=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_RENESAS_USBHS_UDC=m
-CONFIG_USB_MUSB_HDRC=y
-# Restrict to host mode, as it is hard-coded that way in the device tree
-# (dr_mode = "host" in the &usb_otg node)
-CONFIG_USB_MUSB_HOST=y
-CONFIG_USB_MUSB_SUNXI=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK_MINORS=32
-CONFIG_MMC_ARMMMCI=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_ACPI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_OF_ARASAN=y
-CONFIG_MMC_SDHCI_OF_ESDHC=y
-CONFIG_MMC_SDHCI_CADENCE=y
-CONFIG_MMC_SDHCI_TEGRA=y
-CONFIG_MMC_MESON_GX=y
-CONFIG_MMC_SDHCI_MSM=y
-CONFIG_MMC_SPI=y
-CONFIG_MMC_SDHI=y
-CONFIG_MMC_DW=y
-CONFIG_MMC_DW_EXYNOS=y
-CONFIG_MMC_DW_K3=y
-CONFIG_MMC_DW_ROCKCHIP=y
-CONFIG_MMC_SUNXI=y
-CONFIG_MMC_BCM2835=y
-CONFIG_MMC_SDHCI_XENON=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PWM=y
-CONFIG_LEDS_SYSCON=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_EDAC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_MAX77686=y
-CONFIG_RTC_DRV_RK808=m
-CONFIG_RTC_DRV_S5M=y
-CONFIG_RTC_DRV_DS3232=y
-CONFIG_RTC_DRV_EFI=y
-CONFIG_RTC_DRV_S3C=y
-CONFIG_RTC_DRV_PL031=y
-CONFIG_RTC_DRV_SUN6I=y
-CONFIG_RTC_DRV_TEGRA=y
-CONFIG_RTC_DRV_XGENE=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_BCM2835=m
-CONFIG_K3_DMA=y
-CONFIG_MV_XOR_V2=y
-CONFIG_PL330_DMA=y
-CONFIG_TEGRA20_APB_DMA=y
-CONFIG_QCOM_BAM_DMA=y
-CONFIG_QCOM_HIDMA_MGMT=y
-CONFIG_QCOM_HIDMA=y
-CONFIG_RCAR_DMAC=y
-CONFIG_VFIO=y
-CONFIG_VFIO_PCI=y
-CONFIG_VIRTIO_PCI=y
-CONFIG_VIRTIO_BALLOON=y
-CONFIG_VIRTIO_MMIO=y
-CONFIG_XEN_GNTDEV=y
-CONFIG_XEN_GRANT_DEV_ALLOC=y
-CONFIG_STAGING=y
-CONFIG_RTL8723BS=m
-CONFIG_COMMON_CLK_RK808=y
-CONFIG_COMMON_CLK_SCPI=y
-CONFIG_COMMON_CLK_CS2000_CP=y
-CONFIG_COMMON_CLK_S2MPS11=y
-CONFIG_CLK_QORIQ=y
-CONFIG_COMMON_CLK_PWM=y
-CONFIG_COMMON_CLK_QCOM=y
-CONFIG_QCOM_CLK_SMD_RPM=y
-CONFIG_IPQ_GCC_8074=y
-CONFIG_MSM_GCC_8916=y
-CONFIG_MSM_GCC_8994=y
-CONFIG_MSM_MMCC_8996=y
-CONFIG_HWSPINLOCK=y
-CONFIG_HWSPINLOCK_QCOM=y
-CONFIG_ARM_MHU=y
-CONFIG_PLATFORM_MHU=y
-CONFIG_BCM2835_MBOX=y
-CONFIG_HI6220_MBOX=y
-CONFIG_ROCKCHIP_IOMMU=y
-CONFIG_ARM_SMMU=y
-CONFIG_ARM_SMMU_V3=y
-CONFIG_RPMSG_QCOM_SMD=y
-CONFIG_RASPBERRYPI_POWER=y
-CONFIG_QCOM_SMEM=y
-CONFIG_QCOM_SMD_RPM=y
-CONFIG_QCOM_SMP2P=y
-CONFIG_QCOM_SMSM=y
-CONFIG_ROCKCHIP_PM_DOMAINS=y
-CONFIG_ARCH_TEGRA_132_SOC=y
-CONFIG_ARCH_TEGRA_210_SOC=y
-CONFIG_ARCH_TEGRA_186_SOC=y
-CONFIG_EXTCON_USB_GPIO=y
-CONFIG_IIO=y
-CONFIG_EXYNOS_ADC=y
-CONFIG_ROCKCHIP_SARADC=m
-CONFIG_PWM=y
-CONFIG_PWM_BCM2835=m
-CONFIG_PWM_CROS_EC=m
-CONFIG_PWM_MESON=m
-CONFIG_PWM_ROCKCHIP=y
-CONFIG_PWM_SAMSUNG=y
-CONFIG_PWM_TEGRA=m
-CONFIG_PHY_RCAR_GEN3_USB2=y
-CONFIG_PHY_HI6220_USB=y
-CONFIG_PHY_SUN4I_USB=y
-CONFIG_PHY_ROCKCHIP_INNO_USB2=y
-CONFIG_PHY_ROCKCHIP_EMMC=y
-CONFIG_PHY_ROCKCHIP_PCIE=m
-CONFIG_PHY_XGENE=y
-CONFIG_PHY_TEGRA_XUSB=y
-CONFIG_QCOM_L2_PMU=y
-CONFIG_QCOM_L3_PMU=y
-CONFIG_TEE=y
-CONFIG_OPTEE=y
-CONFIG_ARM_SCPI_PROTOCOL=y
-CONFIG_RASPBERRYPI_FIRMWARE=y
-CONFIG_EFI_CAPSULE_LOADER=y
-CONFIG_ACPI=y
-CONFIG_ACPI_APEI=y
-CONFIG_ACPI_APEI_GHES=y
-CONFIG_ACPI_APEI_PCIEAER=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_BTRFS_FS=m
-CONFIG_BTRFS_FS_POSIX_ACL=y
-CONFIG_FANOTIFY=y
-CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
-CONFIG_QUOTA=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=m
-CONFIG_CUSE=m
-CONFIG_OVERLAY_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_HUGETLBFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_EFIVAR_FS=y
-CONFIG_SQUASHFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_NFS_V4_1=y
-CONFIG_NFS_V4_2=y
-CONFIG_ROOT_NFS=y
-CONFIG_9P_FS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_KVM=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOCKUP_DETECTOR=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_FTRACE is not set
-CONFIG_MEMTEST=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_ECHAINIV=y
-CONFIG_CRYPTO_ANSI_CPRNG=y
-CONFIG_ARM64_CRYPTO=y
-CONFIG_CRYPTO_SHA256_ARM64=m
-CONFIG_CRYPTO_SHA512_ARM64=m
-CONFIG_CRYPTO_SHA1_ARM64_CE=y
-CONFIG_CRYPTO_SHA2_ARM64_CE=y
-CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_CRCT10DIF_ARM64_CE=m
-CONFIG_CRYPTO_CRC32_ARM64_CE=m
-CONFIG_CRYPTO_AES_ARM64=m
-CONFIG_CRYPTO_AES_ARM64_CE=m
-CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
-CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-CONFIG_CRYPTO_AES_ARM64_NEON_BLK=m
-CONFIG_CRYPTO_CHACHA20_NEON=m
-CONFIG_CRYPTO_AES_ARM64_BS=m

recipes-kernel/linux/linux-mainline/arm/defconfig

@@ -1,786 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_CGROUPS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_SCHED_AUTOGROUP=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_BPF_SYSCALL=y
-CONFIG_PERF_EVENTS=y
-CONFIG_MODULES=y
-CONFIG_BLK_DEV_BSGLIB=y
-CONFIG_BLK_DEV_INTEGRITY=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_LDM_PARTITION=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=8
-CONFIG_AEABI=y
-CONFIG_HIGHMEM=y
-CONFIG_HIGHPTE=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=m
-CONFIG_CPU_FREQ_GOV_USERSPACE=m
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPU_IDLE=y
-CONFIG_ARM_CPUIDLE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_KERNEL_MODE_NEON=y
-CONFIG_HIBERNATION=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_PACKET_DIAG=m
-CONFIG_UNIX=y
-CONFIG_UNIX_DIAG=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_FIB_TRIE_STATS=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE_DEMUX=m
-CONFIG_NET_IPGRE=m
-CONFIG_NET_FOU=m
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_LRO=m
-CONFIG_INET_DIAG=m
-CONFIG_INET_UDP_DIAG=m
-CONFIG_TCP_CONG_ADVANCED=y
-CONFIG_TCP_CONG_HSTCP=m
-CONFIG_TCP_CONG_HYBLA=m
-CONFIG_TCP_CONG_SCALABLE=m
-CONFIG_TCP_CONG_LP=m
-CONFIG_TCP_CONG_VENO=m
-CONFIG_TCP_CONG_YEAH=m
-CONFIG_TCP_CONG_ILLINOIS=m
-CONFIG_TCP_CONG_DCTCP=m
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_IPV6_VTI=m
-CONFIG_IPV6_GRE=m
-CONFIG_IPV6_MULTIPLE_TABLES=y
-CONFIG_IPV6_SUBTREES=y
-CONFIG_IPV6_MROUTE=y
-CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
-CONFIG_IPV6_PIMSM_V2=y
-CONFIG_NETFILTER=y
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CONNTRACK_TIMEOUT=y
-CONFIG_NF_CONNTRACK_TIMESTAMP=y
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_SCTP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_SNMP=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NF_CT_NETLINK_TIMEOUT=m
-CONFIG_NF_CT_NETLINK_HELPER=m
-CONFIG_NETFILTER_NETLINK_QUEUE_CT=y
-CONFIG_NF_TABLES=m
-CONFIG_NF_TABLES_INET=m
-CONFIG_NFT_EXTHDR=m
-CONFIG_NFT_META=m
-CONFIG_NFT_CT=m
-CONFIG_NFT_RBTREE=m
-CONFIG_NFT_HASH=m
-CONFIG_NFT_COUNTER=m
-CONFIG_NFT_LOG=m
-CONFIG_NFT_LIMIT=m
-CONFIG_NFT_MASQ=m
-CONFIG_NFT_REDIR=m
-CONFIG_NFT_NAT=m
-CONFIG_NFT_QUEUE=m
-CONFIG_NFT_REJECT=m
-CONFIG_NFT_COMPAT=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_HMARK=m
-CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
-CONFIG_NETFILTER_XT_TARGET_LED=m
-CONFIG_NETFILTER_XT_TARGET_LOG=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_TEE=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
-CONFIG_NETFILTER_XT_MATCH_BPF=m
-CONFIG_NETFILTER_XT_MATCH_CGROUP=m
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_CPU=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_NFACCT=m
-CONFIG_NETFILTER_XT_MATCH_OSF=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_SCTP=m
-CONFIG_NETFILTER_XT_MATCH_SOCKET=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_IP_VS=m
-CONFIG_IP_VS_IPV6=y
-CONFIG_IP_VS_DEBUG=y
-CONFIG_IP_VS_PROTO_TCP=y
-CONFIG_IP_VS_PROTO_UDP=y
-CONFIG_IP_VS_PROTO_ESP=y
-CONFIG_IP_VS_PROTO_AH=y
-CONFIG_IP_VS_PROTO_SCTP=y
-CONFIG_IP_VS_RR=m
-CONFIG_IP_VS_WRR=m
-CONFIG_IP_VS_LC=m
-CONFIG_IP_VS_WLC=m
-CONFIG_IP_VS_FO=m
-CONFIG_IP_VS_LBLC=m
-CONFIG_IP_VS_LBLCR=m
-CONFIG_IP_VS_DH=m
-CONFIG_IP_VS_SH=m
-CONFIG_IP_VS_SED=m
-CONFIG_IP_VS_NQ=m
-CONFIG_IP_VS_FTP=m
-CONFIG_IP_VS_PE_SIP=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_NFT_CHAIN_ROUTE_IPV4=m
-CONFIG_NF_TABLES_ARP=m
-CONFIG_NF_LOG_ARP=m
-CONFIG_NFT_CHAIN_NAT_IPV4=m
-CONFIG_NFT_MASQ_IPV4=m
-CONFIG_NFT_REDIR_IPV4=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_SYNPROXY=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_NFT_CHAIN_ROUTE_IPV6=m
-CONFIG_NFT_CHAIN_NAT_IPV6=m
-CONFIG_NFT_MASQ_IPV6=m
-CONFIG_NFT_REDIR_IPV6=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RPFILTER=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP6_NF_NAT=m
-CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_IP6_NF_TARGET_NPT=m
-CONFIG_L2TP=m
-CONFIG_BRIDGE=m
-CONFIG_BRIDGE_VLAN_FILTERING=y
-CONFIG_VLAN_8021Q=m
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_VLAN_8021Q_MVRP=y
-CONFIG_6LOWPAN=m
-CONFIG_IEEE802154=m
-CONFIG_IEEE802154_6LOWPAN=m
-CONFIG_MAC802154=m
-CONFIG_NET_SCHED=y
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=y
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_PRIO=m
-CONFIG_NET_SCH_MULTIQ=m
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFB=m
-CONFIG_NET_SCH_SFQ=y
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-CONFIG_NET_SCH_DRR=m
-CONFIG_NET_SCH_MQPRIO=m
-CONFIG_NET_SCH_CHOKE=m
-CONFIG_NET_SCH_QFQ=m
-CONFIG_NET_SCH_CODEL=m
-CONFIG_NET_SCH_FQ_CODEL=y
-CONFIG_NET_SCH_FQ=m
-CONFIG_NET_SCH_HHF=m
-CONFIG_NET_SCH_PIE=y
-CONFIG_NET_SCH_PLUG=m
-CONFIG_NET_CLS_BASIC=m
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-CONFIG_NET_CLS_FLOW=m
-CONFIG_NET_CLS_CGROUP=m
-CONFIG_NET_CLS_BPF=m
-CONFIG_NET_EMATCH=y
-CONFIG_NET_EMATCH_CMP=m
-CONFIG_NET_EMATCH_NBYTE=m
-CONFIG_NET_EMATCH_U32=m
-CONFIG_NET_EMATCH_META=m
-CONFIG_NET_EMATCH_TEXT=m
-CONFIG_NET_CLS_ACT=y
-CONFIG_NET_ACT_POLICE=m
-CONFIG_NET_ACT_GACT=m
-CONFIG_NET_ACT_MIRRED=m
-CONFIG_NET_ACT_IPT=m
-CONFIG_NET_ACT_NAT=m
-CONFIG_NET_ACT_SIMP=m
-CONFIG_NET_ACT_SKBEDIT=m
-CONFIG_NET_ACT_CSUM=m
-CONFIG_NET_ACT_VLAN=m
-CONFIG_NET_ACT_BPF=m
-CONFIG_NET_ACT_CONNMARK=m
-CONFIG_VSOCKETS=m
-CONFIG_NETLINK_MMAP=y
-CONFIG_NETLINK_DIAG=y
-CONFIG_BPF_JIT=y
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIBTSDIO=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_BT_HCIUART_ATH3K=y
-CONFIG_BT_HCIUART_LL=y
-CONFIG_BT_HCIUART_3WIRE=y
-CONFIG_BT_HCIUART_INTEL=y
-CONFIG_BT_HCIUART_BCM=y
-CONFIG_BT_HCIBCM203X=m
-CONFIG_BT_HCIBPA10X=m
-CONFIG_BT_HCIBFUSB=m
-CONFIG_BT_MRVL=m
-CONFIG_BT_MRVL_SDIO=m
-CONFIG_BT_ATH3K=m
-CONFIG_CFG80211=m
-CONFIG_CFG80211_WEXT=y
-CONFIG_MAC80211=m
-CONFIG_MAC80211_MESH=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
-CONFIG_BLK_DEV_NBD=m
-CONFIG_BLK_DEV_RAM=m
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_WCACHE=y
-CONFIG_EEPROM_SUNXI_SID=y
-CONFIG_SCSI_MQ_DEFAULT=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_ATA=y
-CONFIG_AHCI_SUNXI=y
-CONFIG_MD=y
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BCACHE=m
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_MQ_DEFAULT=y
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_THIN_PROVISIONING=m
-CONFIG_DM_CACHE=m
-CONFIG_DM_ERA=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_LOG_USERSPACE=m
-CONFIG_DM_RAID=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_MULTIPATH_QL=m
-CONFIG_DM_MULTIPATH_ST=m
-CONFIG_DM_DELAY=m
-CONFIG_DM_UEVENT=y
-CONFIG_DM_FLAKEY=m
-CONFIG_DM_VERITY=m
-CONFIG_DM_SWITCH=m
-CONFIG_DM_LOG_WRITES=m
-CONFIG_NETDEVICES=y
-CONFIG_BONDING=m
-CONFIG_DUMMY=m
-CONFIG_NET_TEAM=m
-CONFIG_NET_TEAM_MODE_BROADCAST=m
-CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
-CONFIG_NET_TEAM_MODE_RANDOM=m
-CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
-CONFIG_NET_TEAM_MODE_LOADBALANCE=m
-CONFIG_MACVLAN=m
-CONFIG_MACVTAP=m
-CONFIG_IPVLAN=m
-CONFIG_VXLAN=m
-CONFIG_TUN=m
-CONFIG_VETH=m
-CONFIG_NLMON=m
-CONFIG_SUN4I_EMAC=y
-# CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_MICROCHIP is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SAMSUNG is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-CONFIG_STMMAC_ETH=y
-# CONFIG_NET_VENDOR_VIA is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_MPPE=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPPOE=m
-CONFIG_PPTP=m
-CONFIG_PPPOL2TP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_LIBERTAS_THINFIRM=m
-CONFIG_LIBERTAS_THINFIRM_USB=m
-CONFIG_AT76C50X_USB=m
-CONFIG_USB_ZD1201=m
-CONFIG_USB_NET_RNDIS_WLAN=m
-CONFIG_RTL8187=m
-CONFIG_ATH_CARDS=m
-CONFIG_ATH9K=m
-CONFIG_ATH9K_AHB=y
-CONFIG_ATH9K_CHANNEL_CONTEXT=y
-CONFIG_ATH9K_HTC=m
-CONFIG_CARL9170=m
-CONFIG_ATH6KL=m
-CONFIG_ATH6KL_SDIO=m
-CONFIG_ATH6KL_USB=m
-CONFIG_AR5523=m
-CONFIG_ATH10K=m
-CONFIG_WCN36XX=m
-CONFIG_B43=m
-CONFIG_B43_SDIO=y
-CONFIG_BRCMFMAC=m
-CONFIG_BRCMFMAC_USB=y
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_LIBERTAS_SPI=m
-CONFIG_P54_COMMON=m
-CONFIG_P54_USB=m
-CONFIG_P54_SPI=m
-CONFIG_RT2X00=m
-CONFIG_RT2500USB=m
-CONFIG_RT73USB=m
-CONFIG_RT2800USB=m
-CONFIG_RT2800USB_RT3573=y
-CONFIG_RT2800USB_RT53XX=y
-CONFIG_RT2800USB_RT55XX=y
-CONFIG_RT2800USB_UNKNOWN=y
-CONFIG_RTL8192CU=m
-CONFIG_WL_TI=y
-CONFIG_WL1251=m
-CONFIG_WL1251_SPI=m
-CONFIG_WL1251_SDIO=m
-CONFIG_WL12XX=m
-CONFIG_WL18XX=m
-CONFIG_WLCORE_SPI=m
-CONFIG_WLCORE_SDIO=m
-CONFIG_ZD1211RW=m
-CONFIG_MWIFIEX=m
-CONFIG_MWIFIEX_SDIO=m
-CONFIG_MWIFIEX_USB=m
-CONFIG_CW1200=m
-CONFIG_CW1200_WLAN_SDIO=m
-CONFIG_CW1200_WLAN_SPI=m
-CONFIG_RSI_91X=m
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_MOUSE=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_SUN4I=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_AXP20X_PEK=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=8
-CONFIG_SERIAL_8250_RUNTIME_UARTS=8
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_OF_PLATFORM=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MV64XXX=y
-CONFIG_I2C_SUN6I_P2WI=y
-CONFIG_SPI=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_SPI_SUN4I=y
-CONFIG_SPI_SUN6I=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_RESET=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_OF=y
-CONFIG_CPU_THERMAL=y
-CONFIG_WATCHDOG=y
-CONFIG_SUNXI_WATCHDOG=y
-CONFIG_MFD_AXP20X=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_AXP20X=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_MEDIA_SUPPORT=m
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
-CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
-CONFIG_MEDIA_RADIO_SUPPORT=y
-CONFIG_MEDIA_SDR_SUPPORT=y
-CONFIG_MEDIA_RC_SUPPORT=y
-CONFIG_MEDIA_CONTROLLER=y
-CONFIG_VIDEO_ADV_DEBUG=y
-CONFIG_DVB_DYNAMIC_MINORS=y
-CONFIG_MEDIA_USB_SUPPORT=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_M5602=m
-CONFIG_USB_STV06XX=m
-CONFIG_USB_GL860=m
-CONFIG_USB_GSPCA_BENQ=m
-CONFIG_USB_GSPCA_CONEX=m
-CONFIG_USB_GSPCA_CPIA1=m
-CONFIG_USB_GSPCA_DTCS033=m
-CONFIG_USB_GSPCA_ETOMS=m
-CONFIG_USB_GSPCA_FINEPIX=m
-CONFIG_USB_GSPCA_JEILINJ=m
-CONFIG_USB_GSPCA_JL2005BCD=m
-CONFIG_USB_GSPCA_KINECT=m
-CONFIG_USB_GSPCA_KONICA=m
-CONFIG_USB_GSPCA_MARS=m
-CONFIG_USB_GSPCA_MR97310A=m
-CONFIG_USB_GSPCA_NW80X=m
-CONFIG_USB_GSPCA_OV519=m
-CONFIG_USB_GSPCA_OV534=m
-CONFIG_USB_GSPCA_OV534_9=m
-CONFIG_USB_GSPCA_PAC207=m
-CONFIG_USB_GSPCA_PAC7302=m
-CONFIG_USB_GSPCA_PAC7311=m
-CONFIG_USB_GSPCA_SE401=m
-CONFIG_USB_GSPCA_SN9C2028=m
-CONFIG_USB_GSPCA_SN9C20X=m
-CONFIG_USB_GSPCA_SONIXB=m
-CONFIG_USB_GSPCA_SONIXJ=m
-CONFIG_USB_GSPCA_SPCA500=m
-CONFIG_USB_GSPCA_SPCA501=m
-CONFIG_USB_GSPCA_SPCA505=m
-CONFIG_USB_GSPCA_SPCA506=m
-CONFIG_USB_GSPCA_SPCA508=m
-CONFIG_USB_GSPCA_SPCA561=m
-CONFIG_USB_GSPCA_SPCA1528=m
-CONFIG_USB_GSPCA_SQ905=m
-CONFIG_USB_GSPCA_SQ905C=m
-CONFIG_USB_GSPCA_SQ930X=m
-CONFIG_USB_GSPCA_STK014=m
-CONFIG_USB_GSPCA_STK1135=m
-CONFIG_USB_GSPCA_STV0680=m
-CONFIG_USB_GSPCA_SUNPLUS=m
-CONFIG_USB_GSPCA_T613=m
-CONFIG_USB_GSPCA_TOPRO=m
-CONFIG_USB_GSPCA_TOUPTEK=m
-CONFIG_USB_GSPCA_TV8532=m
-CONFIG_USB_GSPCA_VC032X=m
-CONFIG_USB_GSPCA_VICAM=m
-CONFIG_USB_GSPCA_XIRLINK_CIT=m
-CONFIG_USB_GSPCA_ZC3XX=m
-CONFIG_USB_PWC=m
-CONFIG_VIDEO_CPIA2=m
-CONFIG_USB_ZR364XX=m
-CONFIG_USB_STKWEBCAM=m
-CONFIG_USB_S2255=m
-CONFIG_VIDEO_PVRUSB2=m
-CONFIG_VIDEO_HDPVR=m
-CONFIG_VIDEO_USBVISION=m
-CONFIG_VIDEO_STK1160_COMMON=m
-CONFIG_VIDEO_AU0828=m
-CONFIG_VIDEO_AU0828_RC=y
-CONFIG_VIDEO_CX231XX=m
-CONFIG_VIDEO_CX231XX_DVB=m
-CONFIG_VIDEO_TM6000=m
-CONFIG_VIDEO_TM6000_DVB=m
-CONFIG_DVB_USB=m
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-CONFIG_DVB_USB_CXUSB=m
-CONFIG_DVB_USB_M920X=m
-CONFIG_DVB_USB_DIGITV=m
-CONFIG_DVB_USB_VP7045=m
-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-CONFIG_DVB_USB_TTUSB2=m
-CONFIG_DVB_USB_DTT200U=m
-CONFIG_DVB_USB_OPERA1=m
-CONFIG_DVB_USB_AF9005=m
-CONFIG_DVB_USB_AF9005_REMOTE=m
-CONFIG_DVB_USB_PCTV452E=m
-CONFIG_DVB_USB_DW2102=m
-CONFIG_DVB_USB_CINERGY_T2=m
-CONFIG_DVB_USB_DTV5100=m
-CONFIG_DVB_USB_FRIIO=m
-CONFIG_DVB_USB_AZ6027=m
-CONFIG_DVB_USB_TECHNISAT_USB2=m
-CONFIG_DVB_USB_V2=m
-CONFIG_DVB_USB_AF9015=m
-CONFIG_DVB_USB_AF9035=m
-CONFIG_DVB_USB_ANYSEE=m
-CONFIG_DVB_USB_AU6610=m
-CONFIG_DVB_USB_AZ6007=m
-CONFIG_DVB_USB_CE6230=m
-CONFIG_DVB_USB_EC168=m
-CONFIG_DVB_USB_GL861=m
-CONFIG_DVB_USB_LME2510=m
-CONFIG_DVB_USB_MXL111SF=m
-CONFIG_DVB_USB_RTL28XXU=m
-CONFIG_DVB_USB_DVBSKY=m
-CONFIG_SMS_USB_DRV=m
-CONFIG_DVB_B2C2_FLEXCOP_USB=m
-CONFIG_DVB_AS102=m
-CONFIG_USB_AIRSPY=m
-CONFIG_USB_HACKRF=m
-CONFIG_USB_MSI2500=m
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_SOC_CAMERA=m
-CONFIG_SOC_CAMERA_PLATFORM=m
-CONFIG_V4L_MEM2MEM_DRIVERS=y
-CONFIG_V4L_TEST_DRIVERS=y
-CONFIG_VIDEO_VIVID=m
-CONFIG_VIDEO_VIM2M=m
-CONFIG_SMS_SDIO_DRV=m
-CONFIG_RADIO_SI470X=y
-CONFIG_USB_SI470X=m
-CONFIG_I2C_SI470X=m
-CONFIG_RADIO_SI4713=m
-CONFIG_USB_SI4713=m
-CONFIG_PLATFORM_SI4713=m
-CONFIG_USB_MR800=m
-CONFIG_USB_DSBR=m
-CONFIG_RADIO_SHARK=m
-CONFIG_RADIO_SHARK2=m
-CONFIG_USB_KEENE=m
-CONFIG_USB_RAREMONO=m
-CONFIG_USB_MA901=m
-CONFIG_RADIO_TEA5764=m
-CONFIG_RADIO_SAA7706H=m
-CONFIG_RADIO_TEF6862=m
-CONFIG_RADIO_WL1273=m
-CONFIG_SOC_CAMERA_IMX074=m
-CONFIG_SOC_CAMERA_MT9M001=m
-CONFIG_SOC_CAMERA_MT9M111=m
-CONFIG_SOC_CAMERA_MT9T031=m
-CONFIG_SOC_CAMERA_MT9T112=m
-CONFIG_SOC_CAMERA_MT9V022=m
-CONFIG_SOC_CAMERA_OV2640=m
-CONFIG_SOC_CAMERA_OV5642=m
-CONFIG_SOC_CAMERA_OV6650=m
-CONFIG_SOC_CAMERA_OV772X=m
-CONFIG_SOC_CAMERA_OV9640=m
-CONFIG_SOC_CAMERA_OV9740=m
-CONFIG_SOC_CAMERA_RJ54N1=m
-CONFIG_SOC_CAMERA_TW9910=m
-CONFIG_FB=y
-CONFIG_FB_SIMPLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_SIMPLE=m
-CONFIG_USB_SERIAL_CP210X=m
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_KEYSPAN=m
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_KLSI=m
-CONFIG_USB_SERIAL_MOS7720=m
-CONFIG_USB_SERIAL_MOS7840=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_MMC=y
-CONFIG_MMC_SUNXI=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_CLASS_FLASH=y
-CONFIG_LEDS_LM3530=m
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_LP3944=m
-CONFIG_LEDS_LP5521=m
-CONFIG_LEDS_LP5523=m
-CONFIG_LEDS_LP5562=m
-CONFIG_LEDS_LP8501=m
-CONFIG_LEDS_PCA955X=m
-CONFIG_LEDS_PCA963X=m
-CONFIG_LEDS_DAC124S085=m
-CONFIG_LEDS_REGULATOR=y
-CONFIG_LEDS_BD2802=m
-CONFIG_LEDS_LT3593=m
-CONFIG_LEDS_TCA6507=m
-CONFIG_LEDS_LM355x=m
-CONFIG_LEDS_BLINKM=m
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_LEDS_TRIGGER_TRANSIENT=y
-CONFIG_LEDS_TRIGGER_CAMERA=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_INTF_SYSFS is not set
-# CONFIG_RTC_INTF_PROC is not set
-CONFIG_RTC_DRV_SUN6I=y
-CONFIG_RTC_DRV_SUNXI=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_SUN6I=y
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXTCON=y
-CONFIG_PWM=y
-CONFIG_PWM_SUN4I=y
-CONFIG_PHY_SUN4I_USB=y
-CONFIG_PHY_SUN9I_USB=y
-CONFIG_EXT4_FS=y
-CONFIG_XFS_FS=m
-CONFIG_XFS_POSIX_ACL=y
-CONFIG_BTRFS_FS=m
-CONFIG_BTRFS_FS_POSIX_ACL=y
-CONFIG_FANOTIFY=y
-CONFIG_AUTOFS4_FS=m
-CONFIG_FUSE_FS=m
-CONFIG_OVERLAY_FS=m
-CONFIG_FSCACHE=m
-CONFIG_FSCACHE_STATS=y
-CONFIG_FSCACHE_HISTOGRAM=y
-CONFIG_CACHEFILES=m
-CONFIG_CACHEFILES_HISTOGRAM=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_CRYPTO_DEV_SUN4I_SS=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_CRYPTO_SHA1_ARM_NEON=y
-CONFIG_CRYPTO_SHA256_ARM=y
-CONFIG_CRYPTO_SHA512_ARM_NEON=y
-CONFIG_CRYPTO_AES_ARM_BS=y
-CONFIG_USB_STORAGE=y

recipes-kernel/linux/linux-mainline/axp20x.cfg

@@ -1,4 +0,0 @@
-CONFIG_MFD_AXP20X_I2C=y
-CONFIG_MFD_AXP20X=y
-CONFIG_IIO=y
-CONFIG_AXP20X_POWER=y

recipes-kernel/linux/linux-mainline/drm.cfg

@@ -1,8 +0,0 @@
-CONFIG_DRM=y
-CONFIG_DRM_SUN4I=y
-CONFIG_DRM_SUN8I_DW_HDMI=y
-CONFIG_DRM_SUN8I_MIXER=y
-CONFIG_DRM_LIMA=y
-CONFIG_DRM_PANFROST=y
-CONFIG_CMA=y
-CONFIG_DMA_CMA=y

recipes-kernel/linux/linux-mainline_4.19.186.bb

@@ -1,32 +0,0 @@
-SECTION = "kernel"
-DESCRIPTION = "Mainline Longterm Linux kernel"
-LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
-COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
-
-inherit kernel
-
-require linux.inc
-
-# Since we're not using git, this doesn't make a difference, but we need to fill
-# in something or kernel-yocto.bbclass will fail.
-KBRANCH ?= "master"
-
-# Pull in the devicetree files into the rootfs
-RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"
-
-KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
-
-S = "${WORKDIR}/linux-${PV}"
-
-SRC_URI[md5sum] = "dfb4db3d95bdcd8114281e32eb0be5cd"
-SRC_URI[sha256sum] = "d8c5d7844214510e85ceb9f5236f27f63fc03535a143f3aaa0c1677a8f92e631"
-
-SRC_URI = "https://www.kernel.org/pub/linux/kernel/v4.x/linux-${PV}.tar.xz \
-        file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
-        file://defconfig \
-        "
-
-SRC_URI_append_orange-pi-zero += "\
-	file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
-	"

recipes-kernel/linux/linux-mainline_5.4.111.bb

@@ -1,6 +0,0 @@
-require linux-mainline.inc
-
-DESCRIPTION = "Mainline Longterm Linux kernel"
-
-SRC_URI[md5sum] = "a3820e9aa56af51c0331b7f427e6f71b"
-SRC_URI[sha256sum] = "21626132658dc34cb41b7aa7b80ecf83751890a71ac1a63d77aea9d488271a03"

recipes-kernel/linux/linux-mainline_5.5.3.bb

@@ -1,6 +0,0 @@
-require linux-mainline.inc
-
-DESCRIPTION = "Mainline Stable Linux kernel"
-
-SRC_URI[md5sum] = "3ea50025d8c679a327cf2fc225d81a46"
-SRC_URI[sha256sum] = "2bef3edcf44c746383045f4a809b2013e18c52319c827875ed8e89138951cab2"

recipes-kernel/linux/linux-sunxi/0001-compiler-gcc-integrate-the-various-compiler-gcc-345-.patch

@@ -1,276 +0,0 @@
-From a66aaac889f09425ff0f3ddb27aca46ae02d6eea Mon Sep 17 00:00:00 2001
-From: Joe Perches <joe@perches.com>
-Date: Thu, 25 Jun 2015 15:01:02 -0700
-Subject: [PATCH] compiler-gcc: integrate the various compiler-gcc[345].h files
-
-As gcc major version numbers are going to advance rather rapidly in the
-future, there's no real value in separate files for each compiler
-version.
-
-Deduplicate some of the macros #defined in each file too.
-
-Neaten comments using normal kernel commenting style.
-
-Upstream-Status: Backport
-
-Signed-off-by: Joe Perches <joe@perches.com>
-Cc: Andi Kleen <andi@firstfloor.org>
-Cc: Michal Marek <mmarek@suse.cz>
-Cc: Segher Boessenkool <segher@kernel.crashing.org>
-Cc: Sasha Levin <levinsasha928@gmail.com>
-Cc: Anton Blanchard <anton@samba.org>
-Cc: Alan Modra <amodra@gmail.com>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-Signed-off-by: Jonathan Liu <net147@gmail.com>
----
- include/linux/compiler-gcc.h  | 120 ++++++++++++++++++++++++++++++++++++++++--
- include/linux/compiler-gcc3.h |  23 --------
- include/linux/compiler-gcc4.h |  74 --------------------------
- 3 files changed, 116 insertions(+), 101 deletions(-)
- delete mode 100644 include/linux/compiler-gcc3.h
- delete mode 100644 include/linux/compiler-gcc4.h
-
-diff --git a/include/linux/compiler-gcc.h b/include/linux/compiler-gcc.h
-index 7970e31..727add9 100644
---- a/include/linux/compiler-gcc.h
-+++ b/include/linux/compiler-gcc.h
-@@ -97,10 +97,122 @@
- #define __maybe_unused			__attribute__((unused))
- #define __always_unused			__attribute__((unused))
- 
--#define __gcc_header(x) #x
--#define _gcc_header(x) __gcc_header(linux/compiler-gcc##x.h)
--#define gcc_header(x) _gcc_header(x)
--#include gcc_header(__GNUC__)
-+/* gcc version specific checks */
-+
-+#if GCC_VERSION < 30200
-+# error Sorry, your compiler is too old - please upgrade it.
-+#endif
-+
-+#if GCC_VERSION < 30300
-+# define __used			__attribute__((__unused__))
-+#else
-+# define __used			__attribute__((__used__))
-+#endif
-+
-+#ifdef CONFIG_GCOV_KERNEL
-+# if GCC_VERSION < 30400
-+#   error "GCOV profiling support for gcc versions below 3.4 not included"
-+# endif /* __GNUC_MINOR__ */
-+#endif /* CONFIG_GCOV_KERNEL */
-+
-+#if GCC_VERSION >= 30400
-+#define __must_check		__attribute__((warn_unused_result))
-+#endif
-+
-+#if GCC_VERSION >= 40000
-+
-+/* GCC 4.1.[01] miscompiles __weak */
-+#ifdef __KERNEL__
-+# if GCC_VERSION >= 40100 &&  GCC_VERSION <= 40101
-+#  error Your version of gcc miscompiles the __weak directive
-+# endif
-+#endif
-+
-+#define __used			__attribute__((__used__))
-+#define __compiler_offsetof(a, b)					\
-+	__builtin_offsetof(a, b)
-+
-+#if GCC_VERSION >= 40100 && GCC_VERSION < 40600
-+# define __compiletime_object_size(obj) __builtin_object_size(obj, 0)
-+#endif
-+
-+#if GCC_VERSION >= 40300
-+/* Mark functions as cold. gcc will assume any path leading to a call
-+ * to them will be unlikely.  This means a lot of manual unlikely()s
-+ * are unnecessary now for any paths leading to the usual suspects
-+ * like BUG(), printk(), panic() etc. [but let's keep them for now for
-+ * older compilers]
-+ *
-+ * Early snapshots of gcc 4.3 don't support this and we can't detect this
-+ * in the preprocessor, but we can live with this because they're unreleased.
-+ * Maketime probing would be overkill here.
-+ *
-+ * gcc also has a __attribute__((__hot__)) to move hot functions into
-+ * a special section, but I don't see any sense in this right now in
-+ * the kernel context
-+ */
-+#define __cold			__attribute__((__cold__))
-+
-+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
-+
-+#ifndef __CHECKER__
-+# define __compiletime_warning(message) __attribute__((warning(message)))
-+# define __compiletime_error(message) __attribute__((error(message)))
-+#endif /* __CHECKER__ */
-+#endif /* GCC_VERSION >= 40300 */
-+
-+#if GCC_VERSION >= 40500
-+/*
-+ * Mark a position in code as unreachable.  This can be used to
-+ * suppress control flow warnings after asm blocks that transfer
-+ * control elsewhere.
-+ *
-+ * Early snapshots of gcc 4.5 don't support this and we can't detect
-+ * this in the preprocessor, but we can live with this because they're
-+ * unreleased.  Really, we need to have autoconf for the kernel.
-+ */
-+#define unreachable() __builtin_unreachable()
-+
-+/* Mark a function definition as prohibited from being cloned. */
-+#define __noclone	__attribute__((__noclone__))
-+
-+#endif /* GCC_VERSION >= 40500 */
-+
-+#if GCC_VERSION >= 40600
-+/*
-+ * Tell the optimizer that something else uses this function or variable.
-+ */
-+#define __visible	__attribute__((externally_visible))
-+#endif
-+
-+/*
-+ * GCC 'asm goto' miscompiles certain code sequences:
-+ *
-+ *   http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
-+ *
-+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
-+ *
-+ * (asm goto is automatically volatile - the naming reflects this.)
-+ */
-+#define asm_volatile_goto(x...)	do { asm goto(x); asm (""); } while (0)
-+
-+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
-+#if GCC_VERSION >= 40400
-+#define __HAVE_BUILTIN_BSWAP32__
-+#define __HAVE_BUILTIN_BSWAP64__
-+#endif
-+#if GCC_VERSION >= 40800 || (defined(__powerpc__) && GCC_VERSION >= 40600)
-+#define __HAVE_BUILTIN_BSWAP16__
-+#endif
-+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
-+
-+#if GCC_VERSION >= 50000
-+#define KASAN_ABI_VERSION 4
-+#elif GCC_VERSION >= 40902
-+#define KASAN_ABI_VERSION 3
-+#endif
-+
-+#endif	/* gcc version >= 40000 specific checks */
- 
- #if !defined(__noclone)
- #define __noclone	/* not needed */
-diff --git a/include/linux/compiler-gcc3.h b/include/linux/compiler-gcc3.h
-deleted file mode 100644
-index 37d4124..0000000
---- a/include/linux/compiler-gcc3.h
-+++ /dev/null
-@@ -1,23 +0,0 @@
--#ifndef __LINUX_COMPILER_H
--#error "Please don't include <linux/compiler-gcc3.h> directly, include <linux/compiler.h> instead."
--#endif
--
--#if __GNUC_MINOR__ < 2
--# error Sorry, your compiler is too old - please upgrade it.
--#endif
--
--#if __GNUC_MINOR__ >= 3
--# define __used			__attribute__((__used__))
--#else
--# define __used			__attribute__((__unused__))
--#endif
--
--#if __GNUC_MINOR__ >= 4
--#define __must_check		__attribute__((warn_unused_result))
--#endif
--
--#ifdef CONFIG_GCOV_KERNEL
--# if __GNUC_MINOR__ < 4
--#   error "GCOV profiling support for gcc versions below 3.4 not included"
--# endif /* __GNUC_MINOR__ */
--#endif /* CONFIG_GCOV_KERNEL */
-diff --git a/include/linux/compiler-gcc4.h b/include/linux/compiler-gcc4.h
-deleted file mode 100644
-index 91b1aa8..0000000
---- a/include/linux/compiler-gcc4.h
-+++ /dev/null
-@@ -1,74 +0,0 @@
--#ifndef __LINUX_COMPILER_H
--#error "Please don't include <linux/compiler-gcc4.h> directly, include <linux/compiler.h> instead."
--#endif
--
--/* GCC 4.1.[01] miscompiles __weak */
--#ifdef __KERNEL__
--# if __GNUC_MINOR__ == 1 && __GNUC_PATCHLEVEL__ <= 1
--#  error Your version of gcc miscompiles the __weak directive
--# endif
--#endif
--
--#define __used			__attribute__((__used__))
--#define __must_check 		__attribute__((warn_unused_result))
--#define __compiler_offsetof(a,b) __builtin_offsetof(a,b)
--
--#if __GNUC_MINOR__ >= 3
--/* Mark functions as cold. gcc will assume any path leading to a call
--   to them will be unlikely.  This means a lot of manual unlikely()s
--   are unnecessary now for any paths leading to the usual suspects
--   like BUG(), printk(), panic() etc. [but let's keep them for now for
--   older compilers]
--
--   Early snapshots of gcc 4.3 don't support this and we can't detect this
--   in the preprocessor, but we can live with this because they're unreleased.
--   Maketime probing would be overkill here.
--
--   gcc also has a __attribute__((__hot__)) to move hot functions into
--   a special section, but I don't see any sense in this right now in
--   the kernel context */
--#define __cold			__attribute__((__cold__))
--
--#define __linktime_error(message) __attribute__((__error__(message)))
--
--/*
-- * GCC 'asm goto' miscompiles certain code sequences:
-- *
-- *   http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
-- *
-- * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
-- * Fixed in GCC 4.8.2 and later versions.
-- *
-- * (asm goto is automatically volatile - the naming reflects this.)
-- */
--#if GCC_VERSION <= 40801
--# define asm_volatile_goto(x...)	do { asm goto(x); asm (""); } while (0)
--#else
--# define asm_volatile_goto(x...)	do { asm goto(x); } while (0)
--#endif
--
--#if __GNUC_MINOR__ >= 5
--/*
-- * Mark a position in code as unreachable.  This can be used to
-- * suppress control flow warnings after asm blocks that transfer
-- * control elsewhere.
-- *
-- * Early snapshots of gcc 4.5 don't support this and we can't detect
-- * this in the preprocessor, but we can live with this because they're
-- * unreleased.  Really, we need to have autoconf for the kernel.
-- */
--#define unreachable() __builtin_unreachable()
--
--/* Mark a function definition as prohibited from being cloned. */
--#define __noclone	__attribute__((__noclone__))
--
--#endif
--#endif
--
--#if __GNUC_MINOR__ > 0
--#define __compiletime_object_size(obj) __builtin_object_size(obj, 0)
--#endif
--#if __GNUC_MINOR__ >= 4 && !defined(__CHECKER__)
--#define __compiletime_warning(message) __attribute__((warning(message)))
--#define __compiletime_error(message) __attribute__((error(message)))
--#endif
--- 
-2.10.0
-

recipes-kernel/linux/linux-sunxi/0002-use-static-inline-in-ARM-ftrace.patch

@@ -1,50 +0,0 @@
-From ef4fea130eeb70eff4f3a549fd3f6e9b11437550 Mon Sep 17 00:00:00 2001
-From: ZaneZam <cyxman@yahoo.com>
-Date: Thu, 26 Mar 2015 14:50:10 +0100
-Subject: [PATCH] arm: LLVMLinux: use static inline in ARM ftrace.h
-
-With compilers which follow the C99 standard (like modern versions of gcc and
-clang), "extern inline" does the wrong thing (emits code for an externally
-linkable version of the inline function). In this case using static inline
-and removing the NULL version of return_address in return_address.c does
-the right thing.
-
-Signed-off-by: Behan Webster <behanw@converseincode.com>
-Reviewed-by: Mark Charlebois <charlebm@gmail.com>
-
-source: http://www.serverphorums.com/read.php?12,880351,880351#msg-880351
----
- arch/arm/include/asm/ftrace.h    | 2 +-
- arch/arm/kernel/return_address.c | 2 ++
- 2 files changed, 3 insertions(+), 1 deletion(-)
-
-diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
-index f89515a..2bb8cac 100644
---- a/arch/arm/include/asm/ftrace.h
-+++ b/arch/arm/include/asm/ftrace.h
-@@ -45,7 +45,7 @@ void *return_address(unsigned int);
- 
- #else
- 
--extern inline void *return_address(unsigned int level)
-+static inline void *return_address(unsigned int level)
- {
- 	return NULL;
- }
-diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c
-index f1aef84..49477f0 100644
---- a/arch/arm/kernel/return_address.c
-+++ b/arch/arm/kernel/return_address.c
-@@ -62,10 +62,12 @@ void *return_address(unsigned int level)
- /* #warning "TODO: return_address should use unwind tables" */
- #endif
- 
-+/*
- void *return_address(unsigned int level)
- {
- 	return NULL;
- }
-+*/
- 
- #endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) / else */
- 

recipes-kernel/linux/linux-sunxi/0003-gcc5-fixes.patch

@@ -1,135 +0,0 @@
-From 83b0b8a7b9cb658d3cc980b4fbcbb2cc8b257ccf Mon Sep 17 00:00:00 2001
-From: Trevor Woerner <twoerner@gmail.com>
-Date: Thu, 24 Sep 2015 17:07:26 -0400
-Subject: [PATCH] gcc5 fixes
-
-gcc5 is pickier about inline functions defined in headers.
-
-Signed-off-by: Trevor Woerner <twoerner@gmail.com>
----
- drivers/net/wireless/rtl8188eu/include/ieee80211.h | 4 ++--
- drivers/net/wireless/rtl8189es/include/ieee80211.h | 4 ++--
- drivers/net/wireless/rtl8192cu/include/ieee80211.h | 8 ++++----
- drivers/net/wireless/rtl8723as/include/ieee80211.h | 4 ++--
- drivers/staging/rtl8712/ieee80211.h                | 4 ++--
- 5 files changed, 12 insertions(+), 12 deletions(-)
-
-diff --git a/drivers/net/wireless/rtl8188eu/include/ieee80211.h b/drivers/net/wireless/rtl8188eu/include/ieee80211.h
-index 1ae96a5..7a301c5 100644
---- a/drivers/net/wireless/rtl8188eu/include/ieee80211.h
-+++ b/drivers/net/wireless/rtl8188eu/include/ieee80211.h
-@@ -1188,12 +1188,12 @@ enum ieee80211_state {
- (((Addr[2]) & 0xff) == 0xff) && (((Addr[3]) & 0xff) == 0xff) && (((Addr[4]) & 0xff) == 0xff) && \
- (((Addr[5]) & 0xff) == 0xff))
- #else
--extern __inline int is_multicast_mac_addr(const u8 *addr)
-+static __inline int is_multicast_mac_addr(const u8 *addr)
- {
-         return ((addr[0] != 0xff) && (0x01 & addr[0]));
- }
- 
--extern __inline int is_broadcast_mac_addr(const u8 *addr)
-+static __inline int is_broadcast_mac_addr(const u8 *addr)
- {
- 	return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&   \
- 		(addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
-diff --git a/drivers/net/wireless/rtl8189es/include/ieee80211.h b/drivers/net/wireless/rtl8189es/include/ieee80211.h
-index 1ae96a5..7a301c5 100644
---- a/drivers/net/wireless/rtl8189es/include/ieee80211.h
-+++ b/drivers/net/wireless/rtl8189es/include/ieee80211.h
-@@ -1188,12 +1188,12 @@ enum ieee80211_state {
- (((Addr[2]) & 0xff) == 0xff) && (((Addr[3]) & 0xff) == 0xff) && (((Addr[4]) & 0xff) == 0xff) && \
- (((Addr[5]) & 0xff) == 0xff))
- #else
--extern __inline int is_multicast_mac_addr(const u8 *addr)
-+static __inline int is_multicast_mac_addr(const u8 *addr)
- {
-         return ((addr[0] != 0xff) && (0x01 & addr[0]));
- }
- 
--extern __inline int is_broadcast_mac_addr(const u8 *addr)
-+static __inline int is_broadcast_mac_addr(const u8 *addr)
- {
- 	return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&   \
- 		(addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
-diff --git a/drivers/net/wireless/rtl8192cu/include/ieee80211.h b/drivers/net/wireless/rtl8192cu/include/ieee80211.h
-index 86e9726..950691d 100644
---- a/drivers/net/wireless/rtl8192cu/include/ieee80211.h
-+++ b/drivers/net/wireless/rtl8192cu/include/ieee80211.h
-@@ -1149,12 +1149,12 @@ enum ieee80211_state {
- #define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
- #define MAC_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3],((u8*)(x))[4],((u8*)(x))[5]
- 
--extern __inline int is_multicast_mac_addr(const u8 *addr)
-+static __inline int is_multicast_mac_addr(const u8 *addr)
- {
-         return ((addr[0] != 0xff) && (0x01 & addr[0]));
- }
- 
--extern __inline int is_broadcast_mac_addr(const u8 *addr)
-+static __inline int is_broadcast_mac_addr(const u8 *addr)
- {
- 	return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&   \
- 		(addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
-@@ -1177,7 +1177,7 @@ typedef struct tx_pending_t{
- #define IEEE_G            (1<<2)
- #define IEEE_MODE_MASK    (IEEE_A|IEEE_B|IEEE_G)
- 
--extern __inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
-+static __inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
- {
- 	/* Single white space is for Linksys APs */
- 	if (essid_len == 1 && essid[0] == ' ')
-@@ -1193,7 +1193,7 @@ extern __inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
- 	return 1;
- }
- 
--extern __inline int ieee80211_get_hdrlen(u16 fc)
-+static __inline int ieee80211_get_hdrlen(u16 fc)
- {
- 	int hdrlen = 24;
- 
-diff --git a/drivers/net/wireless/rtl8723as/include/ieee80211.h b/drivers/net/wireless/rtl8723as/include/ieee80211.h
-index bf24c3b..f8046ee 100644
---- a/drivers/net/wireless/rtl8723as/include/ieee80211.h
-+++ b/drivers/net/wireless/rtl8723as/include/ieee80211.h
-@@ -1176,12 +1176,12 @@ enum ieee80211_state {
- (((Addr[2]) & 0xff) == 0xff) && (((Addr[3]) & 0xff) == 0xff) && (((Addr[4]) & 0xff) == 0xff) && \
- (((Addr[5]) & 0xff) == 0xff))
- #else
--extern __inline int is_multicast_mac_addr(const u8 *addr)
-+static __inline int is_multicast_mac_addr(const u8 *addr)
- {
-         return ((addr[0] != 0xff) && (0x01 & addr[0]));
- }
- 
--extern __inline int is_broadcast_mac_addr(const u8 *addr)
-+static __inline int is_broadcast_mac_addr(const u8 *addr)
- {
- 	return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&   \
- 		(addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
-diff --git a/drivers/staging/rtl8712/ieee80211.h b/drivers/staging/rtl8712/ieee80211.h
-index 3c0092b..1e7b55b 100644
---- a/drivers/staging/rtl8712/ieee80211.h
-+++ b/drivers/staging/rtl8712/ieee80211.h
-@@ -734,7 +734,7 @@ enum ieee80211_state {
- #define IEEE_G            (1<<2)
- #define IEEE_MODE_MASK    (IEEE_A|IEEE_B|IEEE_G)
- 
--extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
-+static inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
- {
- 	/* Single white space is for Linksys APs */
- 	if (essid_len == 1 && essid[0] == ' ')
-@@ -748,7 +748,7 @@ extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
- 	return 1;
- }
- 
--extern inline int ieee80211_get_hdrlen(u16 fc)
-+static inline int ieee80211_get_hdrlen(u16 fc)
- {
- 	int hdrlen = 24;
- 
--- 
-2.6.0.rc3
-