orange-pi-zero2: Added wifi firmware

Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Add UWE5622 wifi driver and required firmwmare
2025-07-16 13:59:46 +02:00 · 2023-02-02 20:35:35 +01:00 · 2023-02-02 20:35:35 +01:00 · 2023-02-02 20:35:35 +01:00 · 2023-02-02 20:35:30 +01:00 · 2023-01-31 08:38:29 +01:00
171 changed files with 13354 additions and 21925 deletions
--- a/README.md
+++ b/README.md
@ -6,7 +6,6 @@ Official sunxi OpenEmbedded layer for Allwinner-based boards.
 This layer depends on the additional layers:

 * [meta-openembedded/meta-oe](http://git.openembedded.org/meta-openembedded/tree/meta-oe)
-* [meta-arm](https://git.yoctoproject.org/meta-arm)

 Tested with core-image-base.

@ -17,11 +16,6 @@ Maintainers:
 * Sergey Lapin <slapin@ossfans.org>
 * Marek Belisko <marek.belisko@gmail.com>

-Community
-===========
-
-You can reach community + ask your question on gitter: https://matrix.to/#/#meta-sunxi:gitter.im
-
 Kernel / U-Boot Version
 ===========
 Most Allwinner devices and hardware are supported in mainline kernel and U-Boot, so this layer builds mainline by default.
--- a/classes/sdcard_image-sunxi.bbclass
+++ b/classes/sdcard_image-sunxi.bbclass
@ -0,0 +1,129 @@
+inherit image_types
+
+#
+# Create an image that can by written onto a SD card using dd.
+# Originally written for rasberrypi adapt for the needs of allwinner sunxi based boards
+#
+# The disk layout used is:
+#
+#    0                      -> 8*1024                           - reserverd
+#    8*1024                 ->                                  - arm combined spl/u-boot or aarch64 spl
+#    40*1024                ->                                  - aarch64 u-boot
+#    2048*1024              -> BOOT_SPACE                       - bootloader and kernel
+#
+#
+
+# Use an uncompressed ext4 by default as rootfs
+SDIMG_ROOTFS_TYPE ?= "ext4"
+
+# This image depends on the rootfs image
+IMAGE_TYPEDEP:sunxi-sdimg = "${SDIMG_ROOTFS_TYPE}"
+
+# Boot partition volume id
+BOOTDD_VOLUME_ID ?= "boot"
+
+# Boot partition size [in KiB]
+BOOT_SPACE ?= "40960"
+
+# First partition begin at sector 2048 : 2048*1024 = 2097152
+IMAGE_ROOTFS_ALIGNMENT = "2048"
+
+SDIMG_ROOTFS = "${IMGDEPLOYDIR}/${IMAGE_NAME}.rootfs.${SDIMG_ROOTFS_TYPE}"
+
+do_image_sunxi_sdimg[depends] += " \
+			parted-native:do_populate_sysroot \
+			mtools-native:do_populate_sysroot \
+			dosfstools-native:do_populate_sysroot \
+			virtual/kernel:do_deploy \
+			virtual/bootloader:do_deploy \
+			"
+
+# SD card image name
+SDIMG = "${IMGDEPLOYDIR}/${IMAGE_NAME}.rootfs.sunxi-sdimg"
+
+IMAGE_CMD:sunxi-sdimg () {
+
+	# Align partitions
+	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
+	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT})
+	SDIMG_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $ROOTFS_SIZE + ${IMAGE_ROOTFS_ALIGNMENT})
+
+	# Initialize sdcard image file
+	dd if=/dev/zero of=${SDIMG} bs=1 count=0 seek=$(expr 1024 \* ${SDIMG_SIZE})
+
+	# Create partition table
+	parted -s ${SDIMG} mklabel msdos
+	# Create boot partition and mark it as bootable
+	parted -s ${SDIMG} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT})
+	parted -s ${SDIMG} set 1 boot on
+	# Create rootfs partition
+	parted -s ${SDIMG} unit KiB mkpart primary ext2 $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT}) $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT} \+ ${ROOTFS_SIZE})
+	parted ${SDIMG} print
+
+	# Create a vfat image with boot files
+	BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }')
+	rm -f ${WORKDIR}/boot.img
+	mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
+
+	mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::${KERNEL_IMAGETYPE}
+
+	# Copy device tree file
+	if test -n "${KERNEL_DEVICETREE}"; then
+		for DTS_FILE in ${KERNEL_DEVICETREE}; do
+			DTS_BASE_NAME=`basename ${DTS_FILE} | awk -F "." '{print $1}'`
+			DTS_DIR_NAME=`dirname ${DTS_FILE}`
+			if [ -e ${DEPLOY_DIR_IMAGE}/"${DTS_BASE_NAME}.dtb" ]; then
+
+				if [ ${DTS_FILE} != ${DTS_BASE_NAME}.dtb ]; then
+					mmd -i ${WORKDIR}/boot.img ::/${DTS_DIR_NAME}
+				fi
+
+				kernel_bin="`readlink ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin`"
+				kernel_bin_for_dtb="`readlink ${DEPLOY_DIR_IMAGE}/${DTS_BASE_NAME}.dtb | sed "s,$DTS_BASE_NAME,${KERNEL_IMAGETYPE},g;s,\.dtb$,.bin,g"`"
+				if [ $kernel_bin = $kernel_bin_for_dtb ]; then
+					mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${DTS_BASE_NAME}.dtb ::/${DTS_FILE}
+				fi
+			fi
+		done
+	fi
+
+	if [ -e "${DEPLOY_DIR_IMAGE}/fex.bin" ]
+	then
+		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/fex.bin ::script.bin
+	fi
+	if [ -e "${DEPLOY_DIR_IMAGE}/boot.scr" ]
+	then
+		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/boot.scr ::boot.scr
+	fi
+        if [ -e "${DEPLOY_DIR_IMAGE}/splash.bmp" ]
+        then
+                mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/splash.bmp ::splash.bmp
+        fi
+
+
+	# Add stamp file
+	echo "${IMAGE_NAME}" > ${WORKDIR}/image-version-info
+	mcopy -i ${WORKDIR}/boot.img -v ${WORKDIR}/image-version-info ::
+
+	# Burn Partitions
+	dd if=${WORKDIR}/boot.img of=${SDIMG} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
+	# If SDIMG_ROOTFS_TYPE is a .xz file use xzcat
+	if echo "${SDIMG_ROOTFS_TYPE}" | egrep -q "*\.xz"
+	then
+		xzcat ${SDIMG_ROOTFS} | dd of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
+	else
+		dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
+	fi
+
+	# write u-boot-spl at the begining of sdcard in one shot
+	SPL_FILE=$(basename ${SPL_BINARY})
+	dd if=${DEPLOY_DIR_IMAGE}/${SPL_FILE} of=${SDIMG} bs=1024 seek=8 conv=notrunc
+}
+
+# write uboot.itb for arm64 boards
+IMAGE_CMD_sunxi-sdimg:append:sun50i () {
+	if [ -e "${DEPLOY_DIR_IMAGE}/${UBOOT_BINARY}" ]
+	then
+		dd if=${DEPLOY_DIR_IMAGE}/${UBOOT_BINARY} of=${SDIMG} bs=1024 seek=40 conv=notrunc
+	fi
+}
--- a/conf/layer.conf
+++ b/conf/layer.conf
@ -4,14 +4,14 @@ BBPATH .= ":${LAYERDIR}"
 # We have a recipes directory, add to BBFILES
 BBFILES += "${LAYERDIR}/recipes*/*/*.bb ${LAYERDIR}/recipes*/*/*.bbappend"

-BBFILE_COLLECTIONS += "sunxi"
-BBFILE_PATTERN_sunxi := "^${LAYERDIR}/"
-BBFILE_PRIORITY_sunxi = "10"
+BBFILE_COLLECTIONS += "meta-sunxi"
+BBFILE_PATTERN_meta-sunxi := "^${LAYERDIR}/"
+BBFILE_PRIORITY_meta-sunxi = "10"

 # This should only be incremented on significant changes that will
 # cause compatibility issues with other layers
-LAYERVERSION_sunxi = "1"
+LAYERVERSION_meta-sunxi = "1"

-LAYERDEPENDS_sunxi = "core meta-python meta-arm"
+LAYERDEPENDS_meta-sunxi = "core meta-python"

-LAYERSERIES_COMPAT_sunxi = "honister kirkstone langdale mickledore nanbield scarthgap"
+LAYERSERIES_COMPAT_meta-sunxi = "honister kirkstone"
--- a/conf/machine/bananapi-m2-berry.conf
+++ b/conf/machine/bananapi-m2-berry.conf
@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: bananapi-m2-berry
-#@DESCRIPTION: Machine configuration for the Banana Pi M2 Berry, based on Allwinner V40 CPU
-
-require conf/machine/include/sun8i.inc
-require conf/machine/include/hardware/ap6212a.inc
-
-KERNEL_DEVICETREE = "allwinner/sun8i-v40-bananapi-m2-berry.dtb"
-UBOOT_MACHINE = "bananapi_m2_berry_defconfig"
--- a/conf/machine/bananapi-m2-zero.conf
+++ b/conf/machine/bananapi-m2-zero.conf
@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: bananapi-m2-zero
-#@DESCRIPTION: Machine configuration for the Banana Pi M2 Zero, base on Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-require conf/machine/include/hardware/ap6212a.inc
-
-KERNEL_DEVICETREE = "allwinner/sun8i-h2-plus-bananapi-m2-zero.dtb"
-UBOOT_MACHINE = "bananapi_m2_zero_defconfig"
--- a/conf/machine/bananapi-m2m.conf
+++ b/conf/machine/bananapi-m2m.conf
@ -4,5 +4,6 @@

 require conf/machine/include/sun8i.inc

-KERNEL_DEVICETREE = "allwinner/sun8i-r16-bananapi-m2m.dtb"
+KERNEL_DEVICETREE = "sun8i-r16-bananapi-m2m.dtb"
 UBOOT_MACHINE = "Bananapi_m2m_defconfig"
+
--- a/conf/machine/bananapi-m2plus.conf
+++ b/conf/machine/bananapi-m2plus.conf
@ -4,5 +4,6 @@

 require conf/machine/include/sun8i.inc

-KERNEL_DEVICETREE = "allwinner/sun8i-h3-bananapi-m2-plus.dtb"
+KERNEL_DEVICETREE = "sun8i-h3-bananapi-m2-plus.dtb"
 UBOOT_MACHINE = "bananapi_m2_plus_h3_defconfig"
+
--- a/conf/machine/bananapi.conf
+++ b/conf/machine/bananapi.conf
@ -4,6 +4,6 @@

 require conf/machine/include/sun7i.inc

-KERNEL_DEVICETREE = "allwinner/sun7i-a20-bananapi.dtb"
+KERNEL_DEVICETREE = "sun7i-a20-bananapi.dtb"
 UBOOT_MACHINE = "Bananapi_config"
-SUNXI_FEX_FILE = "sys_config/a20/Bananapi.fex"
+SUNXI_FEX_FILE = "sys_config/a20/Bananapi.fex"
--- a/conf/machine/cubieboard.conf
+++ b/conf/machine/cubieboard.conf
@ -4,6 +4,6 @@

 require conf/machine/include/sun4i.inc

-KERNEL_DEVICETREE = "allwinner/sun4i-a10-cubieboard.dtb"
+KERNEL_DEVICETREE = "sun4i-a10-cubieboard.dtb"
 UBOOT_MACHINE = "Cubieboard_config"
 SUNXI_FEX_FILE = "sys_config/a10/cubieboard.fex"
--- a/conf/machine/cubieboard2.conf
+++ b/conf/machine/cubieboard2.conf
@ -4,6 +4,6 @@

 require conf/machine/include/sun7i.inc

-KERNEL_DEVICETREE = "allwinner/sun7i-a20-cubieboard2.dtb"
+KERNEL_DEVICETREE = "sun7i-a20-cubieboard2.dtb"
 UBOOT_MACHINE = "Cubieboard2_config"
 SUNXI_FEX_FILE = "sys_config/a20/cubieboard2.fex"
--- a/conf/machine/cubieboard4.conf
+++ b/conf/machine/cubieboard4.conf
@ -1,11 +0,0 @@
-#@TYPE: Machine
-#@NAME: CubieBoard4
-#@DESCRIPTION: Machine configuration for the cubieboard4, based on allwinner A80 CPU http://cubieboard.org/
-
-require conf/machine/include/sun9i.inc
-require conf/machine/include/hardware/ap6330.inc
-
-KERNEL_IMAGETYPE = "zImage"
-
-KERNEL_DEVICETREE = "allwinner/sun9i-a80-cubieboard4.dtb"
-UBOOT_MACHINE = "Cubieboard4_defconfig"
--- a/conf/machine/cubietruck.conf
+++ b/conf/machine/cubietruck.conf
@ -4,6 +4,6 @@

 require conf/machine/include/sun7i.inc

-KERNEL_DEVICETREE = "allwinner/sun7i-a20-cubietruck.dtb"
+KERNEL_DEVICETREE = "sun7i-a20-cubietruck.dtb"
 UBOOT_MACHINE = "Cubietruck_config"
-SUNXI_FEX_FILE = "sys_config/a20/cubietruck.fex"
+SUNXI_FEX_FILE = "sys_config/a20/cubietruck.fex"
--- a/conf/machine/include/hardware/ap6212a.inc
+++ b/conf/machine/include/hardware/ap6212a.inc
@ -1,9 +1,5 @@
 # Include for boards with AMPAK 6212A Wifi / Bluetooth module
 # https://linux-sunxi.org/Wifi#Ampak

-MACHINE_EXTRA_RRECOMMENDS:append = " kernel-module-brcmfmac kernel-module-hci-uart"
-MACHINE_EXTRA_RDEPENDS:append = " linux-firmware-bcm43430 armbian-firmware-ap6212"
-
-MACHINE_FEATURES:append = " bluetooth wifi"
-
-KERNEL_FEATURES:append = " features/ap6212/ap6212.scc"
+MACHINE_EXTRA_RRECOMMENDS:append = " kernel-module-brcmfmac"
+MACHINE_EXTRA_RDEPENDS:append = " linux-firmware-bcm43430"
--- a/conf/machine/include/hardware/ap6330.inc
+++ b/conf/machine/include/hardware/ap6330.inc
@ -1,7 +0,0 @@
-# Include for boards with AMPAK AP6330 Wifi / Bluetooth module
-# https://linux-sunxi.org/Wifi#Ampak
-
-MACHINE_EXTRA_RRECOMMENDS:append = " kernel-module-brcmfmac"
-MACHINE_EXTRA_RDEPENDS:append = " linux-firmware-bcm4330"
-
-MACHINE_FEATURES:append = " bluetooth wifi"
--- a/conf/machine/include/sun50i-h6.inc
+++ b/conf/machine/include/sun50i-h6.inc
@ -1,8 +0,0 @@
-require conf/machine/include/sunxi64.inc
-
-DEFAULTTUNE ?= "cortexa53-crypto"
-require conf/machine/include/arm/armv8a/tune-cortexa53.inc
-
-MACHINEOVERRIDES =. "sun50i:"
-
-SOC_FAMILY = "sun50i-h6"
--- a/conf/machine/include/sun50i-h616.inc
+++ b/conf/machine/include/sun50i-h616.inc
@ -1,8 +0,0 @@
-require conf/machine/include/sunxi64.inc
-
-DEFAULTTUNE ?= "cortexa53-crypto"
-require conf/machine/include/arm/armv8a/tune-cortexa53.inc
-
-MACHINEOVERRIDES =. "sun50i:"
-
-SOC_FAMILY = "sun50i-h616"
--- a/conf/machine/include/sun9i.inc
+++ b/conf/machine/include/sun9i.inc
@ -1,5 +0,0 @@
-require conf/machine/include/sunxi.inc
-require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/arm/armv7a/tune-cortexa15.inc
-
-SOC_FAMILY = "sun9i"
--- a/conf/machine/include/sunxi.inc
+++ b/conf/machine/include/sunxi.inc
@ -11,16 +11,17 @@ PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
 XSERVER = "xserver-xorg \
           xf86-input-evdev \
           xf86-input-mouse \
-           xf86-input-libinput"
+           xf86-input-keyboard"

 PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
-PREFERRED_VERSION_linux-mainline ?= "6.6.%"
+PREFERRED_VERSION_linux-mainline ?= "5.15.%"
 PREFERRED_PROVIDER_u-boot ?= "u-boot"
 PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"

 KERNEL_IMAGETYPE ?= "uImage"

-IMAGE_FSTYPES += "ext3 tar.gz wic.gz wic.bmap"
+IMAGE_CLASSES += "sdcard_image-sunxi"
+IMAGE_FSTYPES += "ext3 tar.gz sunxi-sdimg wic.gz wic.bmap"

 MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"

@ -30,7 +31,7 @@ UBOOT_ENTRYPOINT ?= "0x40008000"

 SPL_BINARY ?= "u-boot-sunxi-with-spl.bin"

-SERIAL_CONSOLES ?= "115200;ttyS0"
+SERIAL_CONSOLE ?= "115200 ttyS0"
 MACHINE_FEATURES ?= "alsa apm keyboard rtc serial screen usbgadget usbhost vfat"

 # Mimic the sdcard_image-sunxi.bbclass
@ -40,7 +41,7 @@ SUNXI_FEX_FILE ?= " "
 SUNXI_BOOT_SPACE ?= "40"
 IMAGE_BOOT_FILES ?= "${KERNEL_IMAGETYPE} boot.scr"
 # ship fex file for sunxi kernel, devicetree file for mainline kernel
-IMAGE_BOOT_FILES += "${@bb.utils.contains('PREFERRED_PROVIDER_virtual/kernel', 'linux-sunxi', '${SUNXI_FEX_FILE}', d.getVar('KERNEL_DEVICETREE', '').split('/')[-1], d)}"
+IMAGE_BOOT_FILES += "${@bb.utils.contains('PREFERRED_PROVIDER_virtual/kernel', 'linux-sunxi', '${SUNXI_FEX_FILE}', '${KERNEL_DEVICETREE}', d)}"
 WKS_FILES ?= "sunxi-sdcard-image.wks.in"
 WKS_FILE_DEPENDS ?= "virtual/kernel u-boot"
 # in case of sunxi kernel, sunxi-board-fex must be built prior wic image assembly
--- a/conf/machine/include/sunxi64.inc
+++ b/conf/machine/include/sunxi64.inc
@ -4,29 +4,23 @@ include conf/machine/include/soc-family.inc
 MACHINEOVERRIDES =. "sunxi:sunxi64:"

 PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
-PREFERRED_VERSION_linux-mainline ?= "6.6.%"
 PREFERRED_PROVIDER_u-boot ?= "u-boot"
 PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"

 KERNEL_IMAGETYPE ?= "Image"

-IMAGE_FSTYPES += "ext4 tar.gz wic.gz wic.bmap"
+IMAGE_CLASSES += "sdcard_image-sunxi"
+IMAGE_FSTYPES += "ext4 tar.gz sunxi-sdimg"

 MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"

 UBOOT_LOCALVERSION = "-g${@d.getVar('SRCPV', True).partition('+')[2][0:7]}"

 UBOOT_ENTRYPOINT ?= "0x40008000"
-UBOOT_LOADADDRESS ?= "0x40008000"
+UBOOT_LOADADDRESS ?= "0x400080OB00"

 #UBOOT_BINARY ?= "u-boot.itb"
-SPL_BINARY ?= "u-boot-sunxi-with-spl.bin"
+SPL_BINARY ?= "spl/sunxi-spl.bin"

-SERIAL_CONSOLES ?= "115200;ttyS0"
+SERIAL_CONSOLE ?= "115200 ttyS0"
 MACHINE_FEATURES ?= "alsa apm keyboard rtc serial screen usbgadget usbhost vfat"
-
-SUNXI_BOOT_SPACE ?= "40"
-IMAGE_BOOT_FILES ?= "${KERNEL_IMAGETYPE} boot.scr ${@d.getVar('KERNEL_DEVICETREE', '').split('/')[-1]}"
-
-WKS_FILES ?= "sunxi-sdcard-image.wks.in"
-WKS_FILE_DEPENDS ?= "virtual/kernel u-boot"
--- a/conf/machine/lamobo-r1.conf
+++ b/conf/machine/lamobo-r1.conf
@ -1,10 +0,0 @@
-#@TYPE: Machine
-#@NAME: Lamobo R1
-#@DESCRIPTION: Machine configuration for the lamobo r1, based on allwinner A20 CPU http://bananapi.org/
-
-require conf/machine/include/sun7i.inc
-
-MACHINE_EXTRA_RRECOMMENDS = " kernel-modules kernel-devicetree"
-KERNEL_DEVICETREE = "allwinner/sun7i-a20-lamobo-r1.dtb"
-UBOOT_MACHINE = "Lamobo_R1_config"
-SUNXI_FEX_FILE = "sys_config/a20/lamobo-r1.fex"
--- a/conf/machine/licheepi-zero.conf
+++ b/conf/machine/licheepi-zero.conf
@ -6,4 +6,4 @@ require conf/machine/include/sun8i.inc


 UBOOT_MACHINE = "LicheePi_Zero_defconfig"
-KERNEL_DEVICETREE = "allwinner/sun8i-v3s-licheepi-zero.dtb"
+KERNEL_DEVICETREE = "sun8i-v3s-licheepi-zero.dtb"
--- a/conf/machine/mangopi-mq-t-t113.conf
+++ b/conf/machine/mangopi-mq-t-t113.conf
@ -1,10 +0,0 @@
-#@TYPE: Machine
-#@NAME: MangoPi MQ-R T113-S3
-#@DESCRIPTION: Machine configuration for the MangoPi MQ-R, based on the Allwinner T113-S3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "allwinner/sun8i-t113s-mangopi-mq-r-t113.dtb"
-KERNEL_IMAGETYPE = "zImage"
-
-UBOOT_MACHINE = "mangopi_mq_r_defconfig"
--- a/conf/machine/marsboard-a10.conf
+++ b/conf/machine/marsboard-a10.conf
@ -5,6 +5,6 @@

 require conf/machine/include/sun4i.inc

-KERNEL_DEVICETREE = "allwinner/sun4i-a10-marsboard.dtb"
+KERNEL_DEVICETREE = "sun4i-a10-marsboard.dtb"
 UBOOT_MACHINE = "Marsboard_A10_config"
 SUNXI_FEX_FILE = "sys_config/a10/marsboard_a10.fex"
--- a/conf/machine/mele.conf
+++ b/conf/machine/mele.conf
@ -4,6 +4,6 @@

 require conf/machine/include/sun4i.inc

-KERNEL_DEVICETREE = "allwinner/sun4i-a10-a1000.dtb"
+KERNEL_DEVICETREE = "sun4i-a10-a1000.dtb"
 UBOOT_MACHINE = "Mele_A1000_config"
-SUNXI_FEX_FILE = "sys_config/a10/mele_a1000.fex"
+SUNXI_FEX_FILE = "sys_config/a10/mele_a1000.fex"
--- a/conf/machine/merrii-a80-optimus.conf
+++ b/conf/machine/merrii-a80-optimus.conf
@ -1,11 +0,0 @@
-#@TYPE: Machine
-#@NAME: Merrii A80 Optimus
-#@DESCRIPTION: Machine configuration for the Merrii A80 Optimus, based on Allwinner A80 CPU https://linux-sunxi.org/Merrii_A80_Optimus_Board
-
-require conf/machine/include/sun9i.inc
-require conf/machine/include/hardware/ap6330.inc
-
-KERNEL_IMAGETYPE = "zImage"
-
-KERNEL_DEVICETREE = "allwinner/sun9i-a80-optimus.dtb"
-UBOOT_MACHINE = "Merrii_A80_Optimus_defconfig"
--- a/conf/machine/nanopi-duo2.conf
+++ b/conf/machine/nanopi-duo2.conf
@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: nanopi-duo2
+#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Duo2, based on the Allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-nanopi-duo2.dtb"
+UBOOT_MACHINE = "nanopi_duo2_defconfig"
+
--- a/conf/machine/nanopi-m1-plus.conf
+++ b/conf/machine/nanopi-m1-plus.conf
@ -4,5 +4,6 @@

 require conf/machine/include/sun8i.inc

-KERNEL_DEVICETREE = "allwinner/sun8i-h3-nanopi-m1-plus.dtb"
+KERNEL_DEVICETREE = "sun8i-h3-nanopi-m1-plus.dtb"
 UBOOT_MACHINE = "nanopi_m1_plus_defconfig"
+
--- a/conf/machine/nanopi-m1.conf
+++ b/conf/machine/nanopi-m1.conf
@ -4,5 +4,5 @@

 require conf/machine/include/sun8i.inc

-KERNEL_DEVICETREE = "allwinner/sun8i-h3-nanopi-m1.dtb"
+KERNEL_DEVICETREE = "sun8i-h3-nanopi-m1.dtb"
 UBOOT_MACHINE = "nanopi_m1_defconfig"
--- a/conf/machine/nanopi-neo-air.conf
+++ b/conf/machine/nanopi-neo-air.conf
@ -5,5 +5,5 @@

 require conf/machine/include/sun8i.inc

-KERNEL_DEVICETREE = "allwinner/sun8i-h3-nanopi-neo-air.dtb"
+KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo-air.dtb"
 UBOOT_MACHINE = "nanopi_neo_air_defconfig"
--- a/conf/machine/nanopi-neo.conf
+++ b/conf/machine/nanopi-neo.conf
@ -4,5 +4,6 @@

 require conf/machine/include/sun8i.inc

-KERNEL_DEVICETREE = "allwinner/sun8i-h3-nanopi-neo.dtb"
+KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo.dtb"
 UBOOT_MACHINE = "nanopi_neo_defconfig"
+
--- a/conf/machine/nanopi-r1.conf
+++ b/conf/machine/nanopi-r1.conf
@ -4,5 +4,5 @@

 require conf/machine/include/sun8i.inc

-KERNEL_DEVICETREE = "allwinner/sun8i-h3-nanopi-r1.dtb"
+KERNEL_DEVICETREE = "sun8i-h3-nanopi-r1.dtb"
 UBOOT_MACHINE = "nanopi_r1_defconfig"
--- a/conf/machine/olinuxino-a10lime.conf
+++ b/conf/machine/olinuxino-a10lime.conf
@ -5,6 +5,6 @@

 require conf/machine/include/sun4i.inc

-KERNEL_DEVICETREE = "allwinner/sun4i-a10-olinuxino-lime.dtb"
+KERNEL_DEVICETREE = "sun4i-a10-olinuxino-lime.dtb"
 UBOOT_MACHINE = "A10-OLinuXino-Lime_config"
-SUNXI_FEX_FILE = "sys_config/a10/a10-olinuxino-lime.fex"
+SUNXI_FEX_FILE = "sys_config/a10/a10-olinuxino-lime.fex"
--- a/conf/machine/olinuxino-a10s.conf
+++ b/conf/machine/olinuxino-a10s.conf
@ -5,6 +5,6 @@

 require conf/machine/include/sun5i.inc

-KERNEL_DEVICETREE = "allwinner/sun5i-a10s-olinuxino-micro.dtb"
+KERNEL_DEVICETREE = "sun5i-a10s-olinuxino-micro.dtb"
 UBOOT_MACHINE = "A10s-OLinuXino-M_config"
-SUNXI_FEX_FILE = "sys_config/a10s/a10s-olinuxino-m.fex"
+SUNXI_FEX_FILE = "sys_config/a10s/a10s-olinuxino-m.fex"
--- a/conf/machine/olinuxino-a13.conf
+++ b/conf/machine/olinuxino-a13.conf
@ -5,6 +5,6 @@

 require conf/machine/include/sun5i.inc

-KERNEL_DEVICETREE = "allwinner/sun5i-a13-olinuxino.dtb"
+KERNEL_DEVICETREE = "sun5i-a13-olinuxino.dtb"
 UBOOT_MACHINE = "A13-OLinuXino_config"
-SUNXI_FEX_FILE = "sys_config/a13/a13-olinuxino.fex"
+SUNXI_FEX_FILE = "sys_config/a13/a13-olinuxino.fex"
--- a/conf/machine/olinuxino-a20.conf
+++ b/conf/machine/olinuxino-a20.conf
@ -5,6 +5,6 @@

 require conf/machine/include/sun7i.inc

-KERNEL_DEVICETREE = "allwinner/sun7i-a20-olinuxino-micro.dtb"
+KERNEL_DEVICETREE = "sun7i-a20-olinuxino-micro.dtb"
 UBOOT_MACHINE = "A20-OLinuXino_MICRO_config"
-SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_micro.fex"
+SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_micro.fex"
--- a/conf/machine/olinuxino-a20lime.conf
+++ b/conf/machine/olinuxino-a20lime.conf
@ -5,6 +5,6 @@

 require conf/machine/include/sun7i.inc

-KERNEL_DEVICETREE = "allwinner/sun7i-a20-olinuxino-lime.dtb"
+KERNEL_DEVICETREE = "sun7i-a20-olinuxino-lime.dtb"
 UBOOT_MACHINE = "A20-OLinuXino-Lime_config"
-SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_lime.fex"
+SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_lime.fex"
--- a/conf/machine/olinuxino-a20lime2-emmc.conf
+++ b/conf/machine/olinuxino-a20lime2-emmc.conf
@ -5,6 +5,6 @@

 require conf/machine/include/sun7i.inc

-KERNEL_DEVICETREE = "allwinner/sun7i-a20-olinuxino-lime2-emmc.dtb"
+KERNEL_DEVICETREE = "sun7i-a20-olinuxino-lime2-emmc.dtb"
 UBOOT_MACHINE = "A20-OLinuXino-Lime2-eMMC_config"
 SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_lime2.fex"
--- a/conf/machine/olinuxino-a20lime2.conf
+++ b/conf/machine/olinuxino-a20lime2.conf
@ -5,6 +5,6 @@

 require conf/machine/include/sun7i.inc

-KERNEL_DEVICETREE = "allwinner/sun7i-a20-olinuxino-lime2.dtb"
+KERNEL_DEVICETREE = "sun7i-a20-olinuxino-lime2.dtb"
 UBOOT_MACHINE = "A20-OLinuXino-Lime2_config"
 SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_lime2.fex"
--- a/conf/machine/olinuxino-a20som.conf
+++ b/conf/machine/olinuxino-a20som.conf
@ -5,6 +5,6 @@

 require conf/machine/include/sun7i.inc

-KERNEL_DEVICETREE = "allwinner/sun7i-a20-olimex-som-evb.dtb"
+KERNEL_DEVICETREE = "sun7i-a20-olimex-som-evb.dtb"
 UBOOT_MACHINE = "A20-Olimex-SOM-EVB_config"
 SUNXI_FEX_FILE = "sys_config/a20/olimex_a20_som.fex"
--- a/conf/machine/orange-pi-3lts.conf
+++ b/conf/machine/orange-pi-3lts.conf
@ -1,28 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-3lts
-#@DESCRIPTION: Machine configuration for the Orange Pi 3 LTS , based on Allwinner H6 CPU
-# Note: Some boards have faulty RTC a fix is included by default
-# a workarround in the dts ins include by default but in can removed adding
-# KERNEL_FEATURES:remove = " bsp/orange-pi-3lts/fix-rtc.scc" to local.conf
-
-require conf/machine/include/sun50i-h6.inc
-
-KERNEL_DEVICETREE = "allwinner/sun50i-h6-orangepi-3-lts.dtb"
-UBOOT_MACHINE = "orangepi_3_lts_defconfig"
-
-SPL_BINARY = "u-boot-sunxi-with-spl.bin"
-
-# as for now neither graphics nor audio is supported
-MACHINE_FEATURES:remove = " x11 alsa rtc"
-MACHINE_FEATURES:append = " bluetooth wifi"
-
-# fiwrware needed for wifi + bt
-MACHINE_EXTRA_RRECOMMENDS += " uwe5622-firmware"
-
-# Load modules for wifi & bt
-# Note: fo wifi a custom hci attach userspace sofware is needed that is not included in the layer
-KERNEL_MODULE_AUTOLOAD += " sprdwl_ng sprdbt_tty "
-
-
-
-
--- a/conf/machine/orange-pi-lite.conf
+++ b/conf/machine/orange-pi-lite.conf
@ -1,8 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-lite
-#@DESCRIPTION: Machine configuration for the orange-pi-lite, based on Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "allwinner/sun8i-h3-orangepi-lite.dtb"
-UBOOT_MACHINE = "orangepi_lite_defconfig"
--- a/conf/machine/orange-pi-one-plus.conf
+++ b/conf/machine/orange-pi-one-plus.conf
@ -3,7 +3,7 @@
 #@DESCRIPTION: Machine configuration for the Orange Pi One Plus, based on Allwinner H6 CPU


-require conf/machine/include/sun50i-h6.inc
+require conf/machine/include/sun50i.inc

 KERNEL_DEVICETREE = "allwinner/sun50i-h6-orangepi-one-plus.dtb"
 UBOOT_MACHINE = "orangepi_one_plus_defconfig"
--- a/conf/machine/orange-pi-one.conf
+++ b/conf/machine/orange-pi-one.conf
@ -4,5 +4,6 @@

 require conf/machine/include/sun8i.inc

-KERNEL_DEVICETREE = "allwinner/sun8i-h3-orangepi-one.dtb"
+KERNEL_DEVICETREE = "sun8i-h3-orangepi-one.dtb"
 UBOOT_MACHINE = "orangepi_one_defconfig"
+
--- a/conf/machine/orange-pi-pc-plus.conf
+++ b/conf/machine/orange-pi-pc-plus.conf
@ -4,5 +4,6 @@

 require conf/machine/include/sun8i.inc

-KERNEL_DEVICETREE = "allwinner/sun8i-h3-orangepi-pc-plus.dtb"
+KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc-plus.dtb"
 UBOOT_MACHINE = "orangepi_pc_plus_defconfig"
+
--- a/conf/machine/orange-pi-pc.conf
+++ b/conf/machine/orange-pi-pc.conf
@ -4,5 +4,6 @@

 require conf/machine/include/sun8i.inc

-KERNEL_DEVICETREE = "allwinner/sun8i-h3-orangepi-pc.dtb"
+KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc.dtb"
 UBOOT_MACHINE = "orangepi_pc_defconfig"
+
--- a/conf/machine/orange-pi-prime.conf
+++ b/conf/machine/orange-pi-prime.conf
@ -1,11 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-prime
-#@DESCRIPTION: Machine configuration for the orange-pi-prime, base on Allwinner H5 CPU
-
-require conf/machine/include/sun50i.inc
-require conf/machine/include/hardware/ap6212a.inc
-
-KERNEL_DEVICETREE = "allwinner/sun50i-h5-orangepi-prime.dtb"
-UBOOT_MACHINE = "orangepi_prime_defconfig"
-
-MACHINE_EXTRA_RRECOMMENDS:append = " linux-firmware-rtl8723"
--- a/conf/machine/orange-pi-r1.conf
+++ b/conf/machine/orange-pi-r1.conf
@ -4,5 +4,6 @@

 require conf/machine/include/sun8i.inc

-KERNEL_DEVICETREE = "allwinner/sun8i-h2-plus-orangepi-r1.dtb"
+KERNEL_DEVICETREE = "sun8i-h2-plus-orangepi-r1.dtb"
 UBOOT_MACHINE = "orangepi_r1_defconfig"
+
--- a/conf/machine/orange-pi-zero-plus2-h3.conf
+++ b/conf/machine/orange-pi-zero-plus2-h3.conf
@ -5,5 +5,5 @@
 require conf/machine/include/sun8i.inc
 require conf/machine/include/hardware/ap6212a.inc

-KERNEL_DEVICETREE = "allwinner/sun8i-h3-orangepi-zero-plus2.dtb"
+KERNEL_DEVICETREE = "sun8i-h3-orangepi-zero-plus2.dtb"
 UBOOT_MACHINE = "orangepi_zero_plus2_h3_defconfig"
--- a/conf/machine/orange-pi-zero.conf
+++ b/conf/machine/orange-pi-zero.conf
@ -1,8 +1,9 @@
 #@TYPE: Machine
-#@NAME: orange-pi-zero
-#@DESCRIPTION: Machine configuration for the orange-pi-zero, based on Allwinner H2 CPU
+#@NAME: orange-pi-one
+#@DESCRIPTION: Machine configuration for the orange-pi-one, base on allwinner H3 CPU

 require conf/machine/include/sun8i.inc

-KERNEL_DEVICETREE = "allwinner/sun8i-h2-plus-orangepi-zero.dtb"
+KERNEL_DEVICETREE = "sun8i-h2-plus-orangepi-zero.dtb"
 UBOOT_MACHINE = "orangepi_zero_defconfig"
+
--- a/conf/machine/orange-pi-zero2.conf
+++ b/conf/machine/orange-pi-zero2.conf
@ -2,20 +2,13 @@
 #@NAME: orange-pi-zero-2
 #@DESCRIPTION: Machine configuration for the orange-pi-zero-2, based on Allwinner H616 CPU

-require conf/machine/include/sun50i-h616.inc
+require conf/machine/include/sun50i.inc

 KERNEL_DEVICETREE = "allwinner/sun50i-h616-orangepi-zero2.dtb"
 UBOOT_MACHINE = "orangepi_zero2_defconfig"

-SPL_BINARY = "u-boot-sunxi-with-spl.bin"
-
 # as for now neither graphics nor audio is supported
 MACHINE_FEATURES:remove = "alsa x11"
 MACHINE_FEATURES:append = "bluetooth wifi"

 MACHINE_EXTRA_RRECOMMENDS = "uwe5622-firmware"
-
-# Load modules for wifi & bt
-# Note: fo wifi a custom hci attach userspace sofware is needed that is not included in the layer
-KERNEL_MODULE_AUTOLOAD += " sprdwl_ng sprdbt_tty "
-
--- a/conf/machine/pcduino.conf
+++ b/conf/machine/pcduino.conf
@ -4,6 +4,6 @@

 require conf/machine/include/sun4i.inc

-KERNEL_DEVICETREE = "allwinner/sun4i-a10-pcduino.dtb"
+KERNEL_DEVICETREE = "sun4i-a10-pcduino.dtb"
 UBOOT_MACHINE = "Linksprite_pcDuino_defconfig"
 SUNXI_FEX_FILE = "sys_config/a10/pcduino.fex"
--- a/conf/machine/pcduino3.conf
+++ b/conf/machine/pcduino3.conf
@ -4,6 +4,6 @@

 require conf/machine/include/sun7i.inc

-KERNEL_DEVICETREE = "allwinner/sun7i-a20-pcduino3.dtb"
+KERNEL_DEVICETREE = "sun7i-a20-pcduino3.dtb"
 UBOOT_MACHINE = "Linksprite_pcDuino3_defconfig"
-SUNXI_FEX_FILE = "sys_config/a20/linksprite_pcduino3.fex"
+SUNXI_FEX_FILE = "sys_config/a20/linksprite_pcduino3.fex"
--- a/recipes-bsp/atf/atf-sunxi/0001-Use-same-type-as-in-declaration.patch
+++ b/recipes-bsp/atf/atf-sunxi/0001-Use-same-type-as-in-declaration.patch
@ -0,0 +1,26 @@
+From 087b9306659effac870b4794c0f775ce3d7208c5 Mon Sep 17 00:00:00 2001
+From: Marek Belisko <marek.belisko@open-nandra.com>
+Date: Wed, 13 Apr 2022 08:09:29 +0200
+Subject: [PATCH] Use same type as in declaration
+
+Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
+---
+ services/std_svc/psci/psci_common.c | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/services/std_svc/psci/psci_common.c b/services/std_svc/psci/psci_common.c
+index 75f52f538..918a719f6 100644
+--- a/services/std_svc/psci/psci_common.c
+++ b/services/std_svc/psci/psci_common.c
+@@ -261,7 +261,7 @@ void psci_acquire_afflvl_locks(int start_afflvl,
+  ******************************************************************************/
+ void psci_release_afflvl_locks(int start_afflvl,
+ 			       int end_afflvl,
+-			       aff_map_node_t *mpidr_nodes[])
+			       mpidr_aff_map_nodes_t mpidr_nodes)
+ {
+ 	int level;
+ 
+-- 
+2.25.1
+
--- a/recipes-bsp/atf/atf-sunxi_git.bb
+++ b/recipes-bsp/atf/atf-sunxi_git.bb
@ -0,0 +1,29 @@
+DESCRIPTION = "ARM Trusted Firmware Allwinner"
+LICENSE = "BSD-3-Clause"
+LIC_FILES_CHKSUM = "file://license.md;md5=829bdeb34c1d9044f393d5a16c068371"
+
+SRC_URI = "git://github.com/apritzel/arm-trusted-firmware;nobranch=1;protocol=https"
+SRCREV = "aa75c8da415158a94b82a430b2b40000778e851f"
+
+SRC_URI:append = " file://0001-Use-same-type-as-in-declaration.patch"
+
+S = "${WORKDIR}/git"
+B = "${WORKDIR}/build"
+
+COMPATIBLE_MACHINE = "(sun50i)"
+
+PLATFORM:sun50i = "sun50iw1p1"
+
+LDFLAGS[unexport] = "1"
+
+do_compile() {
+    oe_runmake -C ${S} BUILD_BASE=${B} \
+      CROSS_COMPILE=${TARGET_PREFIX} \
+      PLAT=${PLATFORM} \
+      bl31 \
+      all
+}
+
+do_install() {
+    install -D -p -m 0644 ${B}/${PLATFORM}/release/bl31.bin ${DEPLOY_DIR_IMAGE}/bl31.bin
+}
--- a/recipes-bsp/trusted-firmware-a/trusted-firmware-a_%.bbappend
+++ b/recipes-bsp/trusted-firmware-a/trusted-firmware-a_%.bbappend
@ -1,7 +0,0 @@
-COMPATIBLE_MACHINE:sunxi = "(sun50i|sun50i-h616|sun50i-h6)"
-
-TFA_PLATFORM:sun50i = "sun50i_a64"
-TFA_PLATFORM:sun50i-h6 = "sun50i_h6"
-TFA_PLATFORM:sun50i-h616 = "sun50i_h616"
-
-TFA_BUILD_TARGET:sunxi = "bl31"
--- a/recipes-bsp/u-boot/files/0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch
+++ b/recipes-bsp/u-boot/files/0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch
@ -3,7 +3,7 @@ From: Florin Sarbu <florin@resin.io>
 Date: Wed, 12 Sep 2018 14:22:49 +0200
 Subject: [PATCH] nanopi_neo_air_defconfig: Enable eMMC support

-Upstream-Status: Pending
+Upstream-status: Pending
 Signed-off-by: Florin Sarbu <florin@resin.io>

 ---
--- a/recipes-bsp/u-boot/files/0001-sunxi-board-Fix-early-PMIC-setup-conditions.patch
+++ b/recipes-bsp/u-boot/files/0001-sunxi-board-Fix-early-PMIC-setup-conditions.patch
@ -1,41 +0,0 @@
-From f4dde09fa41eb538b743ee2104c1e2e10cc7e13f Mon Sep 17 00:00:00 2001
-From: Leon Anavi <leon.anavi@konsulko.com>
-Date: Sat, 14 Dec 2024 10:59:09 +0000
-Subject: [PATCH] sunxi: board: Fix early PMIC setup conditions
-
-Patch provided by Andre Przywara through the U-Boot mailing list:
-https://lists.denx.de/pipermail/u-boot/2024-December/575050.html
-
-Upstream-Status: Pending
-
-Suggested-by: Andre Przywara <andre.przywara@arm.com>
-Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
---
- board/sunxi/board.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
-diff --git a/board/sunxi/board.c b/board/sunxi/board.c
-index 961cdcde74..d6759fe853 100644
--- a/board/sunxi/board.c
-+++ b/board/sunxi/board.c
-@@ -577,7 +577,6 @@ void sunxi_board_init(void)
- 
- #ifdef CONFIG_AXP_DCDC1_VOLT
- 	power_failed |= axp_set_dcdc1(CONFIG_AXP_DCDC1_VOLT);
-	power_failed |= axp_set_dcdc5(CONFIG_AXP_DCDC5_VOLT);
- #endif
- #ifdef CONFIG_AXP_DCDC2_VOLT
- 	power_failed |= axp_set_dcdc2(CONFIG_AXP_DCDC2_VOLT);
-@@ -586,6 +585,9 @@ void sunxi_board_init(void)
- #ifdef CONFIG_AXP_DCDC4_VOLT
- 	power_failed |= axp_set_dcdc4(CONFIG_AXP_DCDC4_VOLT);
- #endif
-+#ifdef CONFIG_AXP_DCDC5_VOLT
-+	power_failed |= axp_set_dcdc5(CONFIG_AXP_DCDC5_VOLT);
-+#endif
- 
- #ifdef CONFIG_AXP_ALDO1_VOLT
- 	power_failed |= axp_set_aldo1(CONFIG_AXP_ALDO1_VOLT);
-- 
-2.47.1
-
--- a/recipes-bsp/u-boot/files/0002-Added-nanopi-r1-board-support.patch
+++ b/recipes-bsp/u-boot/files/0002-Added-nanopi-r1-board-support.patch
@ -5,10 +5,135 @@ Subject: [PATCH] Added nanopi-r1 board support

 Patch taken from : https://github.com/armbian/build/blob/master/patch/u-boot/u-boot-sunxi/add-nanopi-r1-and-duo2.patch

-Upstream-Status: Pending
-
 Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
 ---
+ arch/arm/dts/Makefile               |   1 +
+ arch/arm/dts/sun8i-h3-nanopi-r1.dts | 102 ++++++++++++++++++++++++++++++++++++
+ configs/nanopi_r1_defconfig         |  22 ++++++++
+ 3 files changed, 125 insertions(+)
+ create mode 100644 arch/arm/dts/sun8i-h3-nanopi-r1.dts
+ create mode 100644 configs/nanopi_r1_defconfig
+
+diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
+index 9fb3868..6743e32 100644
+--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
+@@ -600,6 +600,7 @@ dtb-$(CONFIG_MACH_SUN8I_H3) += \
+ 	sun8i-h3-nanopi-m1-plus.dtb \
+ 	sun8i-h3-nanopi-neo.dtb \
+ 	sun8i-h3-nanopi-neo-air.dtb \
+	sun8i-h3-nanopi-r1.dtb \
+ 	sun8i-h3-orangepi-2.dtb \
+ 	sun8i-h3-orangepi-lite.dtb \
+ 	sun8i-h3-orangepi-one.dtb \
+diff --git a/arch/arm/dts/sun8i-h3-nanopi-r1.dts b/arch/arm/dts/sun8i-h3-nanopi-r1.dts
+new file mode 100644
+index 0000000..9c3c574
+--- /dev/null
+++ b/arch/arm/dts/sun8i-h3-nanopi-r1.dts
+@@ -0,0 +1,102 @@
+/*
+ * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ *  a) This file is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This file is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ *  b) Permission is hereby granted, free of charge, to any person
+ *     obtaining a copy of this software and associated documentation
+ *     files (the "Software"), to deal in the Software without
+ *     restriction, including without limitation the rights to use,
+ *     copy, modify, merge, publish, distribute, sublicense, and/or
+ *     sell copies of the Software, and to permit persons to whom the
+ *     Software is furnished to do so, subject to the following
+ *     conditions:
+ *
+ *     The above copyright notice and this permission notice shall be
+ *     included in all copies or substantial portions of the Software.
+ *
+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ *     OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-h3-nanopi.dtsi"
+
+/ {
+	model = "FriendlyARM NanoPi R1";
+	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <100000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
+	};
+
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&pio {
+	gmac_power_pin_nanopi: gmac_power_pin@0 {
+		pins = "PD6";
+		function = "gpio_out";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	cap-mmc-hw-reset;
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_rgmii_pins>;
+	phy-supply = <&reg_gmac_3v3>;
+	phy-handle = <&ext_rgmii_phy>;
+	phy-mode = "rgmii";
+
+	status = "okay";
+};
+
+&external_mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+	};
+};
 diff --git a/configs/nanopi_r1_defconfig b/configs/nanopi_r1_defconfig
 new file mode 100644
 index 0000000..e028b41
--- a/recipes-bsp/u-boot/files/0003-Add-nanopi-duo2-board-support.patch
+++ b/recipes-bsp/u-boot/files/0003-Add-nanopi-duo2-board-support.patch
@ -0,0 +1,28 @@
+diff --git a/configs/nanopi_duo2_defconfig b/configs/nanopi_duo2_defconfig
+new file mode 100644
+index 0000000..1e51018
+--- /dev/null
+++ b/configs/nanopi_duo2_defconfig
+@@ -0,0 +1,21 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SYS_TEXT_BASE=0x4a000000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_MACH_SUN8I_H3=y
+CONFIG_DRAM_CLK=408
+CONFIG_DRAM_ZQ=3881979
+CONFIG_DRAM_ODT_EN=y
+# CONFIG_VIDEO_DE2 is not set
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-duo2"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_CONSOLE_MUX=y
+CONFIG_SPL=y
+CONFIG_SYS_CLK_FREQ=480000000
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_SPL_SPI_SUNXI=y
+CONFIG_SUN8I_EMAC=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
+
--- a/recipes-bsp/u-boot/files/0003-sunxi-H6-Enable-Ethernet-on-Orange-Pi-One-Plus.patch
+++ b/recipes-bsp/u-boot/files/0003-sunxi-H6-Enable-Ethernet-on-Orange-Pi-One-Plus.patch
@ -1,58 +0,0 @@
-From: Anne Macedo <retpolanne@posteo.net>
-Date: Tue, 11 Jul 2023 00:39:58 +0000
-Subject: [PATCH] sunxi: H6: Enable Ethernet on Orange Pi One Plus
-
-Enable Ethernet on Orange Pi One Plus by using the correct phy for
-Realtek RTL8211E instead of the Generic One. Also use CONFIG_MACPWR to
-turn on ethernet on startup.
-
-After this patch is applied, a few issues can be seen:
-
- there's still a PHY reset timed out error that doesn't seem to cause
-  any impacts to the overall connection
-
- sometimes the emac driver times out after reset (yellow LED turns on
-  and never blinks)
-
-For future patches: for now, CONFIG_MACPWR is the only way to enable
-Ethernet on boot. There's already code on the dts for using the 3v3-gmac
-regulator. However, it is not probed on boot, so it only starts after a
-"regulator status" command is issued.
-
-More details about the troubleshooting on [1].
-
-Upstream-Status: Submitted
-
-[1] https://lore.kernel.org/u-boot/4wsvwgy56e2xfgtvioru2tf2ofkqprlts36qggivxogww6pn5j@4jk63zxhzhag/
-
-Signed-off-by: Anne Macedo <retpolanne@posteo.net>
---
- arch/arm/dts/sun50i-h6-orangepi-one-plus.dts | 2 +-
- configs/orangepi_one_plus_defconfig          | 4 ++++
- 2 files changed, 5 insertions(+), 1 deletion(-)
-
-diff --git a/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts b/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
-index 29a081e72a..6427c58f8a 100644
--- a/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
-+++ b/arch/arm/dts/sun50i-h6-orangepi-one-plus.dts
-@@ -37,7 +37,7 @@
- 
- &mdio {
- 	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-+		compatible = "ethernet-phy-id001c.c915", "ethernet-phy-ieee802.3-c22" ;
- 		reg = <1>;
- 	};
- };
-diff --git a/configs/orangepi_one_plus_defconfig b/configs/orangepi_one_plus_defconfig
-index aa5f540eb1..a1835492db 100644
--- a/configs/orangepi_one_plus_defconfig
-+++ b/configs/orangepi_one_plus_defconfig
-@@ -8,3 +8,7 @@ CONFIG_SUNXI_DRAM_H6_LPDDR3=y
- # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
- CONFIG_USB_EHCI_HCD=y
- CONFIG_USB_OHCI_HCD=y
-+CONFIG_SUN8I_EMAC=y
-+CONFIG_PHY_REALTEK=y
-+CONFIG_PHY_ETHERNET_ID=y
-+CONFIG_MACPWR="PD6"
--- a/recipes-bsp/u-boot/files/0004-OrangePi-3-LTS-support.patch
+++ b/recipes-bsp/u-boot/files/0004-OrangePi-3-LTS-support.patch
@ -1,421 +0,0 @@
-From 9966dda20246285abf8b417bd251d5a4bea3e423 Mon Sep 17 00:00:00 2001
-From: Juliano Dorigão <jdorigao@gmail.com>
-Date: Fri, 3 Mar 2023 16:11:30 -0400
-Subject: [PATCH] OrangePi 3 LTS support
-
-Upstream-Status: Pending
---
- arch/arm/dts/Makefile                     |   1 +
- arch/arm/dts/sun50i-h6-orangepi-3-lts.dts | 361 ++++++++++++++++++++++
- configs/orangepi_3_lts_defconfig          |  19 ++
- 3 files changed, 381 insertions(+)
- create mode 100644 arch/arm/dts/sun50i-h6-orangepi-3-lts.dts
- create mode 100644 configs/orangepi_3_lts_defconfig
-
-diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
-index 43951a77..8dbbb6f4 100644
--- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -710,6 +710,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \
- dtb-$(CONFIG_MACH_SUN50I_H6) += \
- 	sun50i-h6-beelink-gs1.dtb \
- 	sun50i-h6-orangepi-3.dtb \
-+	sun50i-h6-orangepi-3-lts.dtb \
- 	sun50i-h6-orangepi-lite2.dtb \
- 	sun50i-h6-orangepi-one-plus.dtb \
- 	sun50i-h6-pine-h64.dtb \
-diff --git a/arch/arm/dts/sun50i-h6-orangepi-3-lts.dts b/arch/arm/dts/sun50i-h6-orangepi-3-lts.dts
-new file mode 100644
-index 00000000..67f38b8a
--- /dev/null
-+++ b/arch/arm/dts/sun50i-h6-orangepi-3-lts.dts
-@@ -0,0 +1,361 @@
-+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+// Copyright (C) 2023 Jernej Skrabec <jernej.skrabec@gmail.com>
-+// Based on sun50i-h6-orangepi-3.dts, which is:
-+// Copyright (C) 2019 Ondřej Jirman <megous@megous.com>
-+
-+/dts-v1/;
-+
-+#include "sun50i-h6.dtsi"
-+#include "sun50i-h6-cpu-opp.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+
-+/ {
-+	model = "OrangePi 3 LTS";
-+	compatible = "xunlong,orangepi-3-lts", "allwinner,sun50i-h6";
-+
-+	aliases {
-+		ethernet0 = &emac;
-+		serial0 = &uart0;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	connector {
-+		compatible = "hdmi-connector";
-+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
-+		type = "a";
-+
-+		port {
-+			hdmi_con_in: endpoint {
-+				remote-endpoint = <&hdmi_out_con>;
-+			};
-+		};
-+	};
-+
-+	ext_osc32k: ext_osc32k_clk {
-+		#clock-cells = <0>;
-+		compatible = "fixed-clock";
-+		clock-frequency = <32768>;
-+		clock-output-names = "ext_osc32k";
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		led-0 {
-+			label = "orangepi:red:power";
-+			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
-+		};
-+
-+		led-1 {
-+			label = "orangepi:green:status";
-+			gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
-+			default-state = "on";
-+		};
-+	};
-+
-+	reg_vcc5v: vcc5v {
-+		/* board wide 5V supply directly from the DC jack */
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc-5v";
-+		regulator-min-microvolt = <5000000>;
-+		regulator-max-microvolt = <5000000>;
-+		regulator-always-on;
-+	};
-+
-+	reg_gmac_3v3: gmac-3v3 {
-+		compatible = "regulator-fixed";
-+		regulator-name = "gmac-3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		startup-delay-us = <150000>;
-+		enable-active-high;
-+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
-+	};
-+
-+	reg_vcc33_wifi: vcc33-wifi {
-+		/* Always on 3.3V regulator for WiFi and BT */
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc33-wifi";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		enable-active-high;
-+		gpio = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
-+	};
-+
-+	reg_vcc_wifi_io: vcc-wifi-io {
-+		/* Always on 1.8V/300mA regulator for WiFi and BT IO */
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc-wifi-io";
-+		regulator-min-microvolt = <1800000>;
-+		regulator-max-microvolt = <1800000>;
-+		regulator-always-on;
-+		vin-supply = <&reg_vcc33_wifi>;
-+	};
-+
-+	wifi_pwrseq: wifi-pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		clocks = <&rtc 1>;
-+		clock-names = "ext_clock";
-+		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
-+		post-power-on-delay-ms = <200>;
-+	};
-+};
-+
-+&cpu0 {
-+	cpu-supply = <&reg_dcdca>;
-+};
-+
-+&de {
-+	status = "okay";
-+};
-+
-+&dwc3 {
-+	status = "okay";
-+};
-+
-+&ehci0 {
-+	status = "okay";
-+};
-+
-+&ehci3 {
-+	status = "okay";
-+};
-+
-+&emac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&ext_rgmii_pins>;
-+	phy-mode = "rgmii";
-+	phy-handle = <&ext_rgmii_phy>;
-+	phy-supply = <&reg_gmac_3v3>;
-+	allwinner,rx-delay-ps = <1500>;
-+	allwinner,tx-delay-ps = <700>;
-+	status = "okay";
-+};
-+
-+&gpu {
-+	mali-supply = <&reg_dcdcc>;
-+	status = "okay";
-+};
-+
-+&hdmi {
-+	hvcc-supply = <&reg_bldo2>;
-+	status = "okay";
-+};
-+
-+&hdmi_out {
-+	hdmi_out_con: endpoint {
-+		remote-endpoint = <&hdmi_con_in>;
-+	};
-+};
-+
-+&mdio {
-+	ext_rgmii_phy: ethernet-phy@1 {
-+		compatible = "ethernet-phy-ieee802.3-c22";
-+		reg = <1>;
-+
-+		reset-gpios = <&pio 3 14 GPIO_ACTIVE_LOW>; /* PD14 */
-+		reset-assert-us = <15000>;
-+		reset-deassert-us = <40000>;
-+	};
-+};
-+
-+&mmc0 {
-+	vmmc-supply = <&reg_cldo1>;
-+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
-+	bus-width = <4>;
-+	status = "okay";
-+};
-+
-+&mmc1 {
-+	vmmc-supply = <&reg_vcc33_wifi>;
-+	vqmmc-supply = <&reg_vcc_wifi_io>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	status = "okay";
-+};
-+
-+&mmc2 {
-+	vmmc-supply = <&reg_cldo1>;
-+	vqmmc-supply = <&reg_bldo2>;
-+	cap-mmc-hw-reset;
-+	non-removable;
-+	bus-width = <8>;
-+	status = "okay";
-+};
-+
-+&ohci0 {
-+	status = "okay";
-+};
-+
-+&ohci3 {
-+	status = "okay";
-+};
-+
-+&pio {
-+	vcc-pc-supply = <&reg_bldo2>;
-+	vcc-pd-supply = <&reg_cldo1>;
-+	vcc-pg-supply = <&reg_bldo3>;
-+};
-+
-+&r_ir {
-+	status = "okay";
-+};
-+
-+&r_rsb {
-+	clock-frequency = <100000>;
-+	status = "okay";
-+
-+	axp805: pmic@745 {
-+		compatible = "x-powers,axp805", "x-powers,axp806";
-+		reg = <0x745>;
-+		interrupt-parent = <&r_intc>;
-+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
-+		interrupt-controller;
-+		#interrupt-cells = <1>;
-+		x-powers,self-working-mode;
-+		vina-supply = <&reg_vcc5v>;
-+		vinb-supply = <&reg_vcc5v>;
-+		vinc-supply = <&reg_vcc5v>;
-+		vind-supply = <&reg_vcc5v>;
-+		vine-supply = <&reg_vcc5v>;
-+		aldoin-supply = <&reg_vcc5v>;
-+		bldoin-supply = <&reg_vcc5v>;
-+		cldoin-supply = <&reg_vcc5v>;
-+
-+		regulators {
-+			reg_aldo1: aldo1 {
-+				regulator-always-on;
-+				regulator-min-microvolt = <3300000>;
-+				regulator-max-microvolt = <3300000>;
-+				regulator-name = "vcc-pl-led-ir";
-+			};
-+
-+			reg_aldo2: aldo2 {
-+				regulator-min-microvolt = <3300000>;
-+				regulator-max-microvolt = <3300000>;
-+				regulator-name = "vcc33-audio-tv-ephy-mac";
-+			};
-+
-+			/* ALDO3 is shorted to CLDO1 */
-+			reg_aldo3: aldo3 {
-+				regulator-always-on;
-+				regulator-min-microvolt = <3300000>;
-+				regulator-max-microvolt = <3300000>;
-+				regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-1";
-+			};
-+
-+			reg_bldo1: bldo1 {
-+				regulator-always-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+				regulator-name = "vcc18-dram-bias-pll";
-+			};
-+
-+			reg_bldo2: bldo2 {
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+				regulator-name = "vcc-efuse-pcie-hdmi-pc";
-+			};
-+
-+			reg_bldo3: bldo3 {
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+				regulator-name = "vcc-pm-pg-dcxoio-wifi";
-+			};
-+
-+			bldo4 {
-+				/* unused */
-+			};
-+
-+			reg_cldo1: cldo1 {
-+				regulator-always-on;
-+				regulator-min-microvolt = <3300000>;
-+				regulator-max-microvolt = <3300000>;
-+				regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-2";
-+			};
-+
-+			cldo2 {
-+				/* unused */
-+			};
-+
-+			cldo3 {
-+				/* unused */
-+			};
-+
-+			reg_dcdca: dcdca {
-+				regulator-always-on;
-+				regulator-min-microvolt = <800000>;
-+				regulator-max-microvolt = <1160000>;
-+				regulator-ramp-delay = <2500>;
-+				regulator-name = "vdd-cpu";
-+			};
-+
-+			reg_dcdcc: dcdcc {
-+				regulator-enable-ramp-delay = <32000>;
-+				regulator-min-microvolt = <810000>;
-+				regulator-max-microvolt = <1080000>;
-+				regulator-ramp-delay = <2500>;
-+				regulator-name = "vdd-gpu";
-+			};
-+
-+			reg_dcdcd: dcdcd {
-+				regulator-always-on;
-+				regulator-min-microvolt = <980000>;
-+				regulator-max-microvolt = <980000>;
-+				regulator-name = "vdd-sys";
-+			};
-+
-+			reg_dcdce: dcdce {
-+				regulator-always-on;
-+				regulator-min-microvolt = <1200000>;
-+				regulator-max-microvolt = <1200000>;
-+				regulator-name = "vcc-dram";
-+			};
-+
-+			sw {
-+				/* unused */
-+			};
-+		};
-+	};
-+};
-+
-+&pwm {
-+	status = "okay";
-+};
-+
-+&r_ir {
-+	status = "okay";
-+};
-+
-+&rtc {
-+	clocks = <&ext_osc32k>;
-+};
-+
-+/delete-node/ &spi0;
-+
-+&uart0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart0_ph_pins>;
-+	status = "okay";
-+};
-+
-+&usb2otg {
-+	dr_mode = "host";
-+	status = "okay";
-+};
-+
-+&usb2phy {
-+	usb0_id_det-gpios = <&pio 2 15 GPIO_ACTIVE_HIGH>; /* PC15 */
-+	usb0_vbus-supply = <&reg_vcc5v>;
-+	usb3_vbus-supply = <&reg_vcc5v>;
-+	status = "okay";
-+};
-+
-+&usb3phy {
-+	status = "okay";
-+};
-diff --git a/configs/orangepi_3_lts_defconfig b/configs/orangepi_3_lts_defconfig
-new file mode 100644
-index 00000000..41a9af4e
--- /dev/null
-+++ b/configs/orangepi_3_lts_defconfig
-@@ -0,0 +1,19 @@
-+CONFIG_ARM=y
-+CONFIG_ARCH_SUNXI=y
-+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-3-lts"
-+CONFIG_SPL=y
-+CONFIG_MACH_SUN50I_H6=y
-+CONFIG_SUNXI_DRAM_H6_LPDDR3=y
-+CONFIG_MMC0_CD_PIN="PF6"
-+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
-+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-+CONFIG_SPL_STACK=0x118000
-+CONFIG_SYS_PBSIZE=1024
-+CONFIG_SYS_BOOTM_LEN=0x2000000
-+CONFIG_PHY_SUN50I_USB3=y
-+CONFIG_USB_XHCI_HCD=y
-+CONFIG_USB_XHCI_DWC3=y
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_USB_OHCI_HCD=y
-+CONFIG_USB_DWC3=y
-+# CONFIG_USB_DWC3_GADGET is not set
-- 
-2.39.2
-
--- a/recipes-bsp/u-boot/files/0004-i2c-mvtwsi-Add-compatible-string-for-allwinner-sun4i.patch
+++ b/recipes-bsp/u-boot/files/0004-i2c-mvtwsi-Add-compatible-string-for-allwinner-sun4i.patch
@ -0,0 +1,32 @@
+From eb31a4a141bf401f92426bd053a965022e47290d Mon Sep 17 00:00:00 2001
+From: Chris Morgan <macromorgan@hotmail.com>
+Date: Fri, 7 Jan 2022 11:52:54 -0600
+Subject: [PATCH] i2c: mvtwsi: Add compatible string for allwinner,
+ sun4i-a10-i2c
+
+This adds a compatible string for the Allwinner Sun4i-A10 I2C
+controller. Without this, boards based on the R8 and A13 (at a
+minimum) fail to boot.
+
+Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
+Acked-by: Akash Gajjar <gajjar04akash@gmail.com>
+Signed-off-by: Andre Przywara <andre.przywara@arm.com>
+---
+ drivers/i2c/mvtwsi.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/i2c/mvtwsi.c b/drivers/i2c/mvtwsi.c
+index bad4b1484f..f48a4f25aa 100644
+--- a/drivers/i2c/mvtwsi.c
+++ b/drivers/i2c/mvtwsi.c
+@@ -900,6 +900,7 @@ static const struct dm_i2c_ops mvtwsi_i2c_ops = {
+ static const struct udevice_id mvtwsi_i2c_ids[] = {
+ 	{ .compatible = "marvell,mv64xxx-i2c", },
+ 	{ .compatible = "marvell,mv78230-i2c", },
+	{ .compatible = "allwinner,sun4i-a10-i2c", },
+ 	{ .compatible = "allwinner,sun6i-a31-i2c", },
+ 	{ /* sentinel */ }
+ };
+-- 
+2.34.1
+
--- a/recipes-bsp/u-boot/files/0004-mangopi-mq-r-t113-Fix-serial-console.patch
+++ b/recipes-bsp/u-boot/files/0004-mangopi-mq-r-t113-Fix-serial-console.patch
@ -1,30 +0,0 @@
-From bf813915bf480154c707e0be14016cef94adbd95 Mon Sep 17 00:00:00 2001
-From: Marek Belisko <marek.belisko@gmail.com>
-Date: Tue, 7 May 2024 11:27:08 +0200
-Subject: [PATCH] mangopi-mq-r-t113: Fix serial console
-
-Serial console is on uart3 not on uart0.
-
-Upstream-Status: Inappropriate (for this board only)
-
-Signed-off-by: Marek Belisko <marek.belisko@gmail.com>
---
- include/configs/sunxi-common.h | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
-index b8ca77d031..4e4808d2c1 100644
--- a/include/configs/sunxi-common.h
-+++ b/include/configs/sunxi-common.h
-@@ -324,7 +324,7 @@
- 	MEM_LAYOUT_ENV_EXTRA_SETTINGS \
- 	DFU_ALT_INFO_RAM \
- 	"fdtfile=" FDTFILE "\0" \
-	"console=ttyS0,115200\0" \
-+	"console=ttyS3,115200\0" \
- 	"uuid_gpt_esp=" UUID_GPT_ESP "\0" \
- 	"uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \
- 	"partitions=" PARTS_DEFAULT "\0" \
-- 
-2.25.1
-
--- a/recipes-bsp/u-boot/files/arm/boot.cmd
+++ b/recipes-bsp/u-boot/files/arm/boot.cmd
@ -6,6 +6,6 @@ if itest.b *0x28 == 0x02 ; then
 	rootdev=mmcblk1p2
 fi
 setenv bootargs console=${console} console=tty1 root=/dev/${rootdev} rootwait panic=10 ${extra}
-load mmc 0:1 ${fdt_addr_r} ${fdtfile} || load mmc 0:1 ${fdt_addr_r} boot/allwinner/${fdtfile}
+load mmc 0:1 ${fdt_addr_r} ${fdtfile} || load mmc 0:1 ${fdt_addr_r} boot/${fdtfile}
 load mmc 0:1 ${kernel_addr_r} zImage || load mmc 0:1 ${kernel_addr_r} boot/zImage || load mmc 0:1 ${kernel_addr_r} uImage || load mmc 0:1 ${kernel_addr_r} boot/uImage
 bootz ${kernel_addr_r} - ${fdt_addr_r} || bootm ${kernel_addr_r} - ${fdt_addr_r}
--- a/recipes-bsp/u-boot/files/bananapi-m64/boot.cmd
+++ b/recipes-bsp/u-boot/files/bananapi-m64/boot.cmd
@ -1,11 +0,0 @@
-# Default to (primary) SD
-rootdev=mmcblk0p2
-if itest.b *0x28 == 0x02 ; then
-	# U-Boot loaded from eMMC or secondary SD so use it for rootfs too
-	echo "U-boot loaded from eMMC or secondary SD"
-	rootdev=mmcblk2p2
-fi
-setenv bootargs console=${console} console=tty1 root=/dev/${rootdev} rootwait panic=10 ${extra}
-load mmc 0:1 ${fdt_addr_r} ${fdtfile}
-load mmc 0:1 ${kernel_addr_r} Image
-booti ${kernel_addr_r} - ${fdt_addr_r}
--- a/recipes-bsp/u-boot/u-boot_%.bbappend
+++ b/recipes-bsp/u-boot/u-boot_%.bbappend
@ -1,9 +1,9 @@
 FILESEXTRAPATHS:prepend:sunxi := "${THISDIR}/files:"

 DEPENDS:append:sunxi = " bc-native dtc-native swig-native python3-native flex-native bison-native "
-DEPENDS:append:sun50i = " trusted-firmware-a"
+DEPENDS:append:sun50i = " atf-sunxi "

-COMPATIBLE_MACHINE:sunxi = "(sun4i|sun5i|sun7i|sun8i|sun9i|sun50i)"
+COMPATIBLE_MACHINE:sunxi = "(sun4i|sun5i|sun7i|sun8i|sun50i)"

 DEFAULT_PREFERENCE:sun4i = "1"
 DEFAULT_PREFERENCE:sun5i = "1"
@ -12,19 +12,12 @@ DEFAULT_PREFERENCE:sun8i = "1"
 DEFAULT_PREFERENCE:sun50i = "1"

 SRC_URI:append:sunxi = " \
-    file://0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch \
-    file://0002-Added-nanopi-r1-board-support.patch \
-    file://0003-sunxi-H6-Enable-Ethernet-on-Orange-Pi-One-Plus.patch \
-    file://0004-OrangePi-3-LTS-support.patch \
-    file://boot.cmd \
+        file://0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch \
+	file://0002-Added-nanopi-r1-board-support.patch \
+	file://0003-Add-nanopi-duo2-board-support.patch \
+	file://0004-i2c-mvtwsi-Add-compatible-string-for-allwinner-sun4i.patch \
+        file://boot.cmd \
 "
-SRC_URI:append:sun9i = " \
-    file://0001-sunxi-board-Fix-early-PMIC-setup-conditions.patch \
-"
-
-SRC_URI:append:mangopi-mq-t-t113 = " \
-    file://0004-mangopi-mq-r-t113-Fix-serial-console.patch \
-    "

 UBOOT_ENV_SUFFIX:sunxi = "scr"
 UBOOT_ENV:sunxi = "boot"
@ -32,7 +25,7 @@ UBOOT_ENV:sunxi = "boot"
 EXTRA_OEMAKE:append:sunxi = ' HOSTLDSHARED="${BUILD_CC} -shared ${BUILD_LDFLAGS} ${BUILD_CFLAGS}" '
 EXTRA_OEMAKE:append:sun50i = " BL31=${DEPLOY_DIR_IMAGE}/bl31.bin SCP=/dev/null"

-do_compile:sun50i[depends] += "trusted-firmware-a:do_deploy"
+do_compile_sun50i[depends] += "atf-sunxi:do_deploy"

 do_compile:append:sunxi() {
    ${B}/tools/mkimage -C none -A arm -T script -d ${WORKDIR}/boot.cmd ${WORKDIR}/${UBOOT_ENV_BINARY}
--- a/recipes-devtools/python/files/olinuxino-a20lime2-emmc
+++ b/recipes-devtools/python/files/olinuxino-a20lime2-emmc
@ -1 +0,0 @@
-olinuxino-a20lime2
--- a/recipes-devtools/python/pya20_0.2.12.bb
+++ b/recipes-devtools/python/pya20_0.2.12.bb
@ -13,7 +13,7 @@ SRC_URI = "https://pypi.python.org/packages/source/p/pyA20/pyA20-${PV}.tar.gz \
          "
 S = "${WORKDIR}/pyA20-${PV}"

-inherit setuptools3
+inherit distutils3

 do_compile:prepend() { 
 cp ${WORKDIR}/mapping.h ${S}/pyA20/gpio/mapping.h
--- a/recipes-graphics/libgles/sunxi-mali_git.bb
+++ b/recipes-graphics/libgles/sunxi-mali_git.bb
@ -22,7 +22,7 @@ python __anonymous() {
 }

 SRCREV = "d343311efc8db166d8371b28494f0f27b6a58724"
-SRC_URI = "git://github.com/linux-sunxi/sunxi-mali.git;protocol=https;branch=master \
+SRC_URI = "gitsm://github.com/linux-sunxi/sunxi-mali.git \
           file://0001-Add-EGLSyncKHR-EGLTimeKHR-and-GLChar-definition.patch \
           file://0002-Add-missing-GLchar-definition.patch \
           file://0003-Fix-sed-to-replace-by-the-correct-var.patch \
--- a/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend
+++ b/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend
@ -1 +1 @@
-PACKAGECONFIG[dri3] = "-Ddri3=true,-Ddri3=false,libxshmfence"
+DEPENDS += "libxshmfence"
--- a/recipes-kernel/armbian-firmware/armbian-firmware_git.bb
+++ b/recipes-kernel/armbian-firmware/armbian-firmware_git.bb
@ -1,37 +0,0 @@
-SUMMARY = "Armbian Firmware"
-DESCRIPTION = "Collection of firmware files necessary for Armbian supported hardware devices to work correctly with the Linux kernel"
-LICENSE = "CLOSED"
-
-PV = "1.0+git"
-SRC_URI = "git://github.com/armbian/firmware.git;protocol=https;branch=master"
-SRCREV = "4050e02da2dce2b74c97101f7964ecfb962f5aec"
-
-S = "${WORKDIR}/git"
-
-inherit allarch
-
-do_compile[noexec] = "1"
-
-do_install() {
-    # ap6212 (bluetooth firmware only, wifi firmware is provided by linux-firmware-bcm43430)
-    install -d "${D}${nonarch_base_libdir}/firmware/ap6212"
-    install -m 0644 "${S}/ap6212/bcm43438a1.hcd" "${D}${nonarch_base_libdir}/firmware/ap6212/"
-    install -d "${D}${nonarch_base_libdir}/firmware/brcm"
-    ln -sf ../ap6212/bcm43438a1.hcd "${D}${nonarch_base_libdir}/firmware/brcm/BCM43430A1.hcd"
-}
-
-PACKAGES =+ " \
-    ${PN}-ap6212 \
-"
-
-FILES:${PN}-ap6212 = " \
-    ${nonarch_base_libdir}/firmware/ap6212/* \
-    ${nonarch_base_libdir}/firmware/brcm/BCM43430A1.hcd \
-"
-
-
-# Make armbian-firmware depend on all of the split-out packages.
-python populate_packages:prepend () {
-    firmware_pkgs = oe.utils.packages_filter_out_system(d)
-    d.appendVar('RRECOMMENDS:armbian-firmware', ' ' + ' '.join(firmware_pkgs))
-}
--- a/recipes-kernel/linux-firmware/linux-firmware_%.bbappend
+++ b/recipes-kernel/linux-firmware/linux-firmware_%.bbappend
@ -6,21 +6,8 @@
 # WARNING: The following commit is required for NVRAM files to be included in
 # linux-firmware-bcm43430 package:
 # http://git.openembedded.org/openembedded-core/commit/?id=dde0f79f32fa6bab045ef60199903f74c4cc3393
-do_install:append:sunxi() {
+do_install:append() {
 	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2.txt
 	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2-h3.txt
 	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt
-	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.sinovoip,bpi-m2-berry.txt
-}
-
-do_install:append:cubieboard4() {
-	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac4330-sdio.bin ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac4330-sdio.cubietech,a80-cubieboard4.bin
-}
-
-do_install:append:merrii-a80-optimus() {
-	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac4330-sdio.bin ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac4330-sdio.merrii,a80-optimus.bin
-}
-
-do_install:append:sun9i() {
-	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac4330-sdio.Prowise-PT301.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac4330-sdio.txt
 }
--- a/recipes-kernel/linux/linux-mainline.inc
+++ b/recipes-kernel/linux/linux-mainline.inc
@ -1,14 +1,12 @@
 SECTION = "kernel"
 LICENSE = "GPL-2.0-only"
 LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
-COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun9i|sun50i)"
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"

 inherit kernel

 require linux.inc

-LINUX_VERSION = "${PV}"
-
 # Since we're not using git, this doesn't make a difference, but we need to fill
 # in something or kernel-yocto.bbclass will fail.
 KBRANCH ?= "master"
@ -22,34 +20,13 @@ KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"

 S = "${WORKDIR}/linux-${PV}"

-# get release version 5.x or 6.x based on version
-KRELEASE = "${@d.getVar('PV', True).split('.')[0]}"
-
-SRC_URI = "https://www.kernel.org/pub/linux/kernel/v${KRELEASE}.x/linux-${PV}.tar.xz \
-	   file://defconfig \
-	   file://sunxi-kmeta;type=kmeta;name=sunxi-kmeta;destsuffix=sunxi-kmeta \
-"
-
-# patches
-SRC_URI:append = " \
-	file://patches/0001-dts-orangepi-zero-Add-wifi-support.patch \
-	file://patches/0002-dts-nanopi-neo-air-Add-camera-support.patch \
-	file://patches/0003-dts-allwinner-bananapi-m2-zero-Enforce-consistent-MM.patch \
-	file://patches/0004-dts-allwinner-bananapi-m64-Consistent-nodes-for-mmc-devices.patch \
-	file://patches/0005-ARM-dts-sunxi-Add-MMC-alias-for-consistent-enumerati.patch \
-	file://patches/0006-dts-allwinner-orangepi-zero-mmc-aliases-for-consiste.patch \
+SRC_URI = "https://www.kernel.org/pub/linux/kernel/v5.x/linux-${PV}.tar.xz \
+	file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
+	file://defconfig \
 "

 SRC_URI:append:use-mailine-graphics = " file://drm.cfg"
 SRC_URI:append:bananapi = " file://axp20x.cfg"
-SRC_URI:append:bananapi-m2-berry = " file://axp20x.cfg"
-SRC_URI:append:bananapi-m2-zero = " file://axp20x.cfg"
 SRC_URI:append:cubietruck = " file://axp20x.cfg"
-SRC_URI:append:nanopi-neo-air = " file://cam500b.cfg"
-SRC_URI:append:orange-pi-prime = " \
-	file://0001-dts-sun50i-h5-enable-power-button-for-orange-pi-prime.patch \
-	file://0002-dts-sun50i-h5-orange-pi-prime-add-regulator.patch \
-	file://0003-dts-sun50i-h5-orange-pi-prime-add-rtl8723cs.patch \
-"

 FILES_${KERNEL_PACKAGE_NAME}-base:append = " ${nonarch_base_libdir}/modules/${KERNEL_VERSION}/modules.builtin.modinfo"
--- a/recipes-kernel/linux/linux-mainline/patches/0001-dts-orangepi-zero-Add-wifi-support.patch
+++ b/recipes-kernel/linux/linux-mainline/patches/0001-dts-orangepi-zero-Add-wifi-support.patch
@ -1,18 +1,8 @@
-From a9bad790ae9a9e9befbe8e8938b6baca84ee5138 Mon Sep 17 00:00:00 2001
-From: Marek Belisko <marek.belisko@open-nandra.com>
-Date: Tue, 24 Oct 2023 10:40:52 +0200
-Subject: [PATCH] dts: orangepi-zero: Add wifi support
-
-Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
---
- .../allwinner/sun8i-h2-plus-orangepi-zero.dts | 46 +++++++++++++++----
- 1 file changed, 37 insertions(+), 9 deletions(-)
-
-diff --git a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
-index 3706216ff..ca94e313f 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
-+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
-@@ -80,13 +80,15 @@ status_led {
+diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+index 84cd9c061..917986cce 100644
+--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
+@@ -80,13 +80,15 @@
 		};
 	};
 
@ -33,8 +23,8 @@ index 3706216ff..ca94e313f 100644
 	};
 
 	reg_vdd_cpux: vdd-cpux-regulator {
-@@ -105,10 +107,12 @@ reg_vdd_cpux: vdd-cpux-regulator {
- 		states = <1100000 0>, <1300000 1>;
+@@ -106,10 +108,12 @@
+ 			  1300000 1>;
 	};
 
 -	wifi_pwrseq: wifi_pwrseq {
@ -48,7 +38,7 @@ index 3706216ff..ca94e313f 100644
 	};
 };
 
-@@ -139,9 +143,11 @@ &mmc0 {
+@@ -140,9 +144,11 @@
 };
 
 &mmc1 {
@ -62,7 +52,7 @@ index 3706216ff..ca94e313f 100644
 	non-removable;
 	status = "okay";
 
-@@ -151,6 +157,13 @@ &mmc1 {
+@@ -152,6 +158,13 @@
 	 */
 	xr819: sdio_wifi@1 {
 		reg = <1>;
@ -76,7 +66,7 @@ index 3706216ff..ca94e313f 100644
 	};
 };
 
-@@ -207,3 +220,18 @@ &usbphy {
+@@ -208,3 +221,18 @@
 	status = "okay";
 	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
 };
@ -95,6 +85,3 @@ index 3706216ff..ca94e313f 100644
 +    };
 +};
 +
-- 
-2.25.1
-
--- a/recipes-kernel/linux/linux-mainline/cam500b.cfg
+++ b/recipes-kernel/linux/linux-mainline/cam500b.cfg
@ -1,6 +0,0 @@
-CONFIG_MEDIA_PLATFORM_SUPPORT=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
-
-CONFIG_VIDEO_OV5640=m
-CONFIG_VIDEO_SUN6I_CSI=m
-CONFIG_VIDEO_V4L2=m
--- a/recipes-kernel/linux/linux-mainline/orange-pi-prime/0001-dts-sun50i-h5-enable-power-button-for-orange-pi-prime.patch
+++ b/recipes-kernel/linux/linux-mainline/orange-pi-prime/0001-dts-sun50i-h5-enable-power-button-for-orange-pi-prime.patch
@ -1,27 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Gunjan Gupta <viraniac@gmail.com>
-Date: Sat, 15 Jul 2023 17:06:17 +0000
-Subject: arm64: dts: sun50i: h5: enable power button for orangepi prime
-
---
- arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts | 3 ++-
- 1 file changed, 2 insertions(+), 1 deletion(-)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
-index f430acd8558f..35e09098570f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
-@@ -63,8 +63,9 @@ gpio-keys {
- 
- 		key-sw4 {
- 			label = "sw4";
-			linux,code = <BTN_0>;
-+			linux,code = <KEY_POWER>;
- 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
-+			wakeup-source;
- 		};
- 	};
- 
-- 
-Armbian
-
--- a/recipes-kernel/linux/linux-mainline/orange-pi-prime/0002-dts-sun50i-h5-orange-pi-prime-add-regulator.patch
+++ b/recipes-kernel/linux/linux-mainline/orange-pi-prime/0002-dts-sun50i-h5-orange-pi-prime-add-regulator.patch
@ -1,66 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: The-going <48602507+The-going@users.noreply.github.com>
-Date: Mon, 24 Jan 2022 19:34:31 +0300
-Subject: arm64:dts: sun50i-h5-orangepi-prime add regulator
-
---
- .../allwinner/sun50i-h5-orangepi-prime.dts    | 30 +++++++++++++++++++
- 1 file changed, 30 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
-index 998396bc0..6dc6850c1 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
-@@ -8,6 +8,7 @@
- 
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/input/input.h>
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
- 
- / {
- 	model = "Xunlong Orange Pi Prime";
-@@ -93,6 +94,10 @@ wifi_pwrseq: wifi_pwrseq {
- 	};
- };
- 
-+&cpu0 {
-+	cpu-supply = <&reg_vdd_cpux>;
-+};
-+
- &codec {
- 	allwinner,audio-routing =
- 		"Line Out", "LINEOUT",
-@@ -188,6 +193,31 @@ &ohci3 {
- 	status = "okay";
- };
- 
-+&r_i2c {
-+	status = "okay";
-+
-+	reg_vdd_cpux: regulator@65 {
-+		compatible = "silergy,sy8106a";
-+		reg = <0x65>;
-+		regulator-name = "vdd-cpux";
-+		silergy,fixed-microvolt = <1200000>;
-+		/*
-+		 * The datasheet uses 1.1V as the minimum value of VDD-CPUX,
-+		 * however both the Armbian DVFS table and the official one
-+		 * have operating points with voltage under 1.1V, and both
-+		 * DVFS table are known to work properly at the lowest
-+		 * operating point.
-+		 *
-+		 * Use 1.0V as the minimum voltage instead.
-+		 */
-+		regulator-min-microvolt = <1000000>;
-+		regulator-max-microvolt = <1400000>;
-+		regulator-ramp-delay = <200>;
-+		regulator-boot-on;
-+		regulator-always-on;
-+	};
-+};
-+
- &uart0 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&uart0_pa_pins>;
-- 
-2.25.1
--- a/recipes-kernel/linux/linux-mainline/orange-pi-prime/0003-dts-sun50i-h5-orange-pi-prime-add-rtl8723cs.patch
+++ b/recipes-kernel/linux/linux-mainline/orange-pi-prime/0003-dts-sun50i-h5-orange-pi-prime-add-rtl8723cs.patch
@ -1,35 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: The-going <48602507+The-going@users.noreply.github.com>
-Date: Mon, 7 Feb 2022 19:11:07 +0300
-Subject: arm64:dts: sun50i-h5-orangepi-prime add rtl8723cs
-
---
- arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts | 5 +++++
- 1 file changed, 5 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
-index 8b92d5e77220..f430acd8558f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
-@@ -25,6 +25,7 @@ reg_vcc3v3: vcc3v3 {
- 	aliases {
- 		ethernet0 = &emac;
- 		serial0 = &uart0;
-+		ethernet1 = &rtl8723cs;
- 	};
- 
- 	chosen {
-@@ -174,6 +175,10 @@ &mmc1 {
- 	bus-width = <4>;
- 	non-removable;
- 	status = "okay";
-+
-+	rtl8723cs: sdio_wifi@1 {
-+		reg = <1>;
-+	};
- };
- 
- &ohci0 {
-- 
-Armbian
-
--- a/recipes-kernel/linux/linux-mainline/orange-pi-zero2/0001-dts-add-h616-and-orangepizero2.patch
+++ b/recipes-kernel/linux/linux-mainline/orange-pi-zero2/0001-dts-add-h616-and-orangepizero2.patch
@ -0,0 +1,907 @@
+From 4de4213f698a5962f839f671e4dec247baa35d5b Mon Sep 17 00:00:00 2001
+From: Patryk Biel <patryk.biel.external@trumpf.com>
+Date: Wed, 25 Jan 2023 20:30:15 +0100
+Subject: [PATCH] Add device tree from master
+
+---
+ arch/arm64/boot/dts/allwinner/Makefile        |   1 +
+ .../allwinner/sun50i-h616-orangepi-zero2.dts  | 261 ++++++++
+ .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 590 ++++++++++++++++++
+ include/dt-bindings/clock/sun6i-rtc.h         |  10 +
+ 4 files changed, 862 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+ create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+ create mode 100644 include/dt-bindings/clock/sun6i-rtc.h
+
+diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
+index a96d9d2d8..471822f5f 100644
+--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
+@@ -37,3 +37,4 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-orangepi-one-plus.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
+ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
+\ No newline at end of file
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+new file mode 100644
+index 000000000..e92055145
+--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+/*
+ * Copyright (C) 2020 Arm Ltd.
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "OrangePi Zero2";
+	compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616";
+
+	aliases {
+		ethernet0 = &emac0;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
+			default-state = "on";
+		};
+
+		led-1 {
+			function = LED_FUNCTION_STATUS;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the USB-C socket */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_vcc33_wifi: vcc33-wifi {
+		/* Always on 3.3V regulator for WiFi and BT */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc33-wifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc5v>;
+	};
+
+	reg_vcc_wifi_io: vcc-wifi-io {
+		/* Always on 1.8V/300mA regulator for WiFi and BT IO */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-wifi-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc33_wifi>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc 1>;
+		clock-names = "osc32k-out";
+		reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&emac0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ext_rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_dcdce>;
+	allwinner,rx-delay-ps = <3100>;
+	allwinner,tx-delay-ps = <700>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc33_wifi>;
+	vqmmc-supply = <&reg_vcc_wifi_io>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	mmc-ddr-1_8v;
+	status = "okay";
+
+	uwe-bsp {
+		compatible = "unisoc,uwe_bsp";
+		keep-power-on;
+		data-irq;
+		//adma-tx;
+		adma-rx;
+		//blksz-512;
+		status = "okay";
+	};
+};
+
+&mdio0 {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_dcdce>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&r_rsb {
+	status = "okay";
+
+	axp305: pmic@745 {
+		compatible = "x-powers,axp305", "x-powers,axp805",
+			     "x-powers,axp806";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x745>;
+
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-sys";
+			};
+
+			reg_aldo2: aldo2 {	/* 3.3V on headers */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3-ext";
+			};
+
+			reg_aldo3: aldo3 {	/* 3.3V on headers */
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3-ext2";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			bldo2 {
+				/* unused */
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			cldo1 {
+				/* reserved */
+			};
+
+			cldo2 {
+				/* unused */
+			};
+
+			cldo3 {
+				/* unused */
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd-dram";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-eth-mmc";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+};
+
+&pio {
+	vcc-pc-supply = <&reg_aldo1>;
+	vcc-pf-supply = <&reg_aldo1>;
+	vcc-pg-supply = <&reg_bldo1>;
+	vcc-ph-supply = <&reg_aldo1>;
+	vcc-pi-supply = <&reg_aldo1>;
+};
+
+&spi0  {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>, <&spi0_cs0_pin>;
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <40000000>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+new file mode 100644
+index 000000000..ab344ea8a
+--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+@@ -0,0 +1,590 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2020 Arm Ltd.
+// based on the H6 dtsi, which is:
+//   Copyright (C) 2017 Icenowy Zheng <icenowy@aosc.io>
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/sun50i-h616-ccu.h>
+#include <dt-bindings/clock/sun50i-h6-r-ccu.h>
+#include <dt-bindings/clock/sun6i-rtc.h>
+#include <dt-bindings/reset/sun50i-h616-ccu.h>
+#include <dt-bindings/reset/sun50i-h6-r-ccu.h>
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <0>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <1>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+		};
+
+		cpu2: cpu@2 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <2>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+		};
+
+		cpu3: cpu@3 {
+			compatible = "arm,cortex-a53";
+			device_type = "cpu";
+			reg = <3>;
+			enable-method = "psci";
+			clocks = <&ccu CLK_CPUX>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/*
+		 * 256 KiB reserved for Trusted Firmware-A (BL31).
+		 * This is added by BL31 itself, but some bootloaders fail
+		 * to propagate this into the DTB handed to kernels.
+		 */
+		secmon@40000000 {
+			reg = <0x0 0x40000000 0x0 0x40000>;
+			no-map;
+		};
+	};
+
+	osc24M: osc24M-clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+		clock-output-names = "osc24M";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		arm,no-tick-in-suspend;
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x40000000>;
+
+		syscon: syscon@3000000 {
+			compatible = "allwinner,sun50i-h616-system-control";
+			reg = <0x03000000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			sram_c: sram@28000 {
+				compatible = "mmio-sram";
+				reg = <0x00028000 0x30000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x00028000 0x30000>;
+			};
+		};
+
+		ccu: clock@3001000 {
+			compatible = "allwinner,sun50i-h616-ccu";
+			reg = <0x03001000 0x1000>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>;
+			clock-names = "hosc", "losc", "iosc";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		watchdog: watchdog@30090a0 {
+			compatible = "allwinner,sun50i-h616-wdt",
+				     "allwinner,sun6i-a31-wdt";
+			reg = <0x030090a0 0x20>;
+			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&osc24M>;
+		};
+
+		pio: pinctrl@300b000 {
+			compatible = "allwinner,sun50i-h616-pinctrl";
+			reg = <0x0300b000 0x400>;
+			interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_APB1>, <&osc24M>, <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+
+			ext_rgmii_pins: rgmii-pins {
+				pins = "PI0", "PI1", "PI2", "PI3", "PI4",
+				       "PI5", "PI7", "PI8", "PI9", "PI10",
+				       "PI11", "PI12", "PI13", "PI14", "PI15",
+				       "PI16";
+				function = "emac0";
+				drive-strength = <40>;
+			};
+
+			i2c0_pins: i2c0-pins {
+				pins = "PI6", "PI7";
+				function = "i2c0";
+			};
+
+			i2c3_ph_pins: i2c3-ph-pins {
+				pins = "PH4", "PH5";
+				function = "i2c3";
+			};
+
+			ir_rx_pin: ir-rx-pin {
+				pins = "PH10";
+				function = "ir_rx";
+			};
+
+			mmc0_pins: mmc0-pins {
+				pins = "PF0", "PF1", "PF2", "PF3",
+				       "PF4", "PF5";
+				function = "mmc0";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			mmc1_pins: mmc1-pins {
+				pins = "PG0", "PG1", "PG2", "PG3",
+				       "PG4", "PG5";
+				function = "mmc1";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			mmc2_pins: mmc2-pins {
+				pins = "PC0", "PC1", "PC5", "PC6",
+				       "PC8", "PC9", "PC10", "PC11",
+				       "PC13", "PC14", "PC15", "PC16";
+				function = "mmc2";
+				drive-strength = <30>;
+				bias-pull-up;
+			};
+
+			/omit-if-no-ref/
+			spi0_pins: spi0-pins {
+				pins = "PC0", "PC2", "PC4";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi0_cs0_pin: spi0-cs0-pin {
+				pins = "PC3";
+				function = "spi0";
+			};
+
+			/omit-if-no-ref/
+			spi1_pins: spi1-pins {
+				pins = "PH6", "PH7", "PH8";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_cs0_pin: spi1-cs0-pin {
+				pins = "PH5";
+				function = "spi1";
+			};
+
+			uart0_ph_pins: uart0-ph-pins {
+				pins = "PH0", "PH1";
+				function = "uart0";
+			};
+
+			/omit-if-no-ref/
+			uart1_pins: uart1-pins {
+				pins = "PG6", "PG7";
+				function = "uart1";
+			};
+
+			/omit-if-no-ref/
+			uart1_rts_cts_pins: uart1-rts-cts-pins {
+				pins = "PG8", "PG9";
+				function = "uart1";
+			};
+		};
+
+		gic: interrupt-controller@3021000 {
+			compatible = "arm,gic-400";
+			reg = <0x03021000 0x1000>,
+			      <0x03022000 0x2000>,
+			      <0x03024000 0x2000>,
+			      <0x03026000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+
+		mmc0: mmc@4020000 {
+			compatible = "allwinner,sun50i-h616-mmc",
+				     "allwinner,sun50i-a100-mmc";
+			reg = <0x04020000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC0>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc0_pins>;
+			status = "disabled";
+			max-frequency = <150000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			mmc-ddr-3_3v;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc1: mmc@4021000 {
+			compatible = "allwinner,sun50i-h616-mmc",
+				     "allwinner,sun50i-a100-mmc";
+			reg = <0x04021000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC1>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc1_pins>;
+			status = "disabled";
+			max-frequency = <150000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			mmc-ddr-3_3v;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		mmc2: mmc@4022000 {
+			compatible = "allwinner,sun50i-h616-emmc",
+				     "allwinner,sun50i-a100-emmc";
+			reg = <0x04022000 0x1000>;
+			clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>;
+			clock-names = "ahb", "mmc";
+			resets = <&ccu RST_BUS_MMC2>;
+			reset-names = "ahb";
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&mmc2_pins>;
+			status = "disabled";
+			max-frequency = <150000000>;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			mmc-ddr-3_3v;
+			cap-sdio-irq;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		uart0: serial@5000000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000000 0x400>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART0>;
+			resets = <&ccu RST_BUS_UART0>;
+			status = "disabled";
+		};
+
+		uart1: serial@5000400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000400 0x400>;
+			interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART1>;
+			resets = <&ccu RST_BUS_UART1>;
+			status = "disabled";
+		};
+
+		uart2: serial@5000800 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000800 0x400>;
+			interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART2>;
+			resets = <&ccu RST_BUS_UART2>;
+			status = "disabled";
+		};
+
+		uart3: serial@5000c00 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05000c00 0x400>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART3>;
+			resets = <&ccu RST_BUS_UART3>;
+			status = "disabled";
+		};
+
+		uart4: serial@5001000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05001000 0x400>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART4>;
+			resets = <&ccu RST_BUS_UART4>;
+			status = "disabled";
+		};
+
+		uart5: serial@5001400 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x05001400 0x400>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			reg-shift = <2>;
+			reg-io-width = <4>;
+			clocks = <&ccu CLK_BUS_UART5>;
+			resets = <&ccu RST_BUS_UART5>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@5002000 {
+			compatible = "allwinner,sun50i-h616-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002000 0x400>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C0>;
+			resets = <&ccu RST_BUS_I2C0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&i2c0_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c1: i2c@5002400 {
+			compatible = "allwinner,sun50i-h616-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002400 0x400>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C1>;
+			resets = <&ccu RST_BUS_I2C1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c2: i2c@5002800 {
+			compatible = "allwinner,sun50i-h616-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002800 0x400>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C2>;
+			resets = <&ccu RST_BUS_I2C2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c3: i2c@5002c00 {
+			compatible = "allwinner,sun50i-h616-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05002c00 0x400>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C3>;
+			resets = <&ccu RST_BUS_I2C3>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		i2c4: i2c@5003000 {
+			compatible = "allwinner,sun50i-h616-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x05003000 0x400>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_I2C4>;
+			resets = <&ccu RST_BUS_I2C4>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi0: spi@5010000 {
+			compatible = "allwinner,sun50i-h616-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x05010000 0x1000>;
+			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI0>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		spi1: spi@5011000 {
+			compatible = "allwinner,sun50i-h616-spi",
+				     "allwinner,sun8i-h3-spi";
+			reg = <0x05011000 0x1000>;
+			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+			clock-names = "ahb", "mod";
+			resets = <&ccu RST_BUS_SPI1>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		emac0: ethernet@5020000 {
+			compatible = "allwinner,sun50i-h616-emac0",
+				     "allwinner,sun50i-a64-emac";
+			reg = <0x05020000 0x10000>;
+			interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			clocks = <&ccu CLK_BUS_EMAC0>;
+			clock-names = "stmmaceth";
+			resets = <&ccu RST_BUS_EMAC0>;
+			reset-names = "stmmaceth";
+			syscon = <&syscon>;
+			status = "disabled";
+
+			mdio0: mdio {
+				compatible = "snps,dwmac-mdio";
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		rtc: rtc@7000000 {
+			compatible = "allwinner,sun50i-h616-rtc",
+				     "allwinner,sun50i-h6-rtc";
+			reg = <0x07000000 0x400>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
+			clock-output-names = "osc32k", "osc32k-out", "iosc";
+			#clock-cells = <1>;
+		};
+
+		r_ccu: clock@7010000 {
+			compatible = "allwinner,sun50i-h616-r-ccu";
+			reg = <0x07010000 0x210>;
+			clocks = <&osc24M>, <&rtc CLK_OSC32K>, <&rtc CLK_IOSC>,
+				 <&ccu CLK_PLL_PERIPH0>;
+			clock-names = "hosc", "losc", "iosc", "pll-periph";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		r_pio: pinctrl@7022000 {
+			compatible = "allwinner,sun50i-h616-r-pinctrl";
+			reg = <0x07022000 0x400>;
+			clocks = <&r_ccu CLK_R_APB1>, <&osc24M>,
+				 <&rtc CLK_OSC32K>;
+			clock-names = "apb", "hosc", "losc";
+			gpio-controller;
+			#gpio-cells = <3>;
+
+			/omit-if-no-ref/
+			r_i2c_pins: r-i2c-pins {
+				pins = "PL0", "PL1";
+				function = "s_i2c";
+			};
+
+			r_rsb_pins: r-rsb-pins {
+				pins = "PL0", "PL1";
+				function = "s_rsb";
+			};
+		};
+
+		ir: ir@7040000 {
+			compatible = "allwinner,sun50i-h616-ir",
+				     "allwinner,sun6i-a31-ir";
+			reg = <0x07040000 0x400>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB1_IR>,
+				 <&r_ccu CLK_IR>;
+			clock-names = "apb", "ir";
+			resets = <&r_ccu RST_R_APB1_IR>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&ir_rx_pin>;
+			status = "disabled";
+		};
+
+		r_i2c: i2c@7081400 {
+			compatible = "allwinner,sun50i-h616-i2c",
+				     "allwinner,sun8i-v536-i2c",
+				     "allwinner,sun6i-a31-i2c";
+			reg = <0x07081400 0x400>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB2_I2C>;
+			resets = <&r_ccu RST_R_APB2_I2C>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		r_rsb: rsb@7083000 {
+			compatible = "allwinner,sun50i-h616-rsb",
+				     "allwinner,sun8i-a23-rsb";
+			reg = <0x07083000 0x400>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&r_ccu CLK_R_APB2_RSB>;
+			clock-frequency = <3000000>;
+			resets = <&r_ccu RST_R_APB2_RSB>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&r_rsb_pins>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+	};
+};
+diff --git a/include/dt-bindings/clock/sun6i-rtc.h b/include/dt-bindings/clock/sun6i-rtc.h
+new file mode 100644
+index 000000000..c845493e4
+--- /dev/null
+++ b/include/dt-bindings/clock/sun6i-rtc.h
+@@ -0,0 +1,10 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+
+#ifndef _DT_BINDINGS_CLK_SUN6I_RTC_H_
+#define _DT_BINDINGS_CLK_SUN6I_RTC_H_
+
+#define CLK_OSC32K		0
+#define CLK_OSC32K_FANOUT	1
+#define CLK_IOSC		2
+
+#endif /* _DT_BINDINGS_CLK_SUN6I_RTC_H_ */
+-- 
+2.34.1
+
--- a/recipes-kernel/linux/linux-mainline/orange-pi-zero2/0002-drv-add-dump_reg-and-sunxi-sysinfo-drivers.patch
+++ b/recipes-kernel/linux/linux-mainline/orange-pi-zero2/0002-drv-add-dump_reg-and-sunxi-sysinfo-drivers.patch
--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/nvmem-sunxi_sid-add-sunxi_get_soc_chipid-sunxi_get_serial.patch
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/nvmem-sunxi_sid-add-sunxi_get_soc_chipid-sunxi_get_serial.patch
@ -1,17 +1,18 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From 452a691a83df1aab77cec33203cb04a817817a05 Mon Sep 17 00:00:00 2001
 From: The-going <48602507+The-going@users.noreply.github.com>
-Date: Sat, 16 Apr 2022 11:19:05 +0300
-Subject: nvmem: sunxi_sid: add sunxi_get_soc_chipid, sunxi_get_serial
+Date: Thu, 5 May 2022 22:55:13 +0300
+Subject: [PATCH] drv: nvmem: sunxi_sid: Add sunxi_get_soc_chipid,
+ sunxi_get_serial

 ---
- drivers/nvmem/sunxi_sid.c | 28 ++++++++++
+ drivers/nvmem/sunxi_sid.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

 diff --git a/drivers/nvmem/sunxi_sid.c b/drivers/nvmem/sunxi_sid.c
-index c526fe4abe22..e522bd1e5edd 100644
+index 37a6abb0e..c81fac63d 100644
 --- a/drivers/nvmem/sunxi_sid.c
 +++ b/drivers/nvmem/sunxi_sid.c
-@@ -36,6 +36,25 @@ struct sunxi_sid {
+@@ -37,6 +37,25 @@ struct sunxi_sid {
 	u32			value_offset;
 };
 
@ -37,7 +38,7 @@ index c526fe4abe22..e522bd1e5edd 100644
 static int sunxi_sid_read(void *context, unsigned int offset,
 			  void *val, size_t bytes)
 {
-@@ -177,6 +196,15 @@ static int sunxi_sid_probe(struct platform_device *pdev)
+@@ -167,6 +186,15 @@ static int sunxi_sid_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, nvmem);
 
@ -54,5 +55,6 @@ index c526fe4abe22..e522bd1e5edd 100644
 }
 
 -- 
-Armbian
+2.35.3
+

--- a/recipes-kernel/linux/linux-mainline/orange-pi-zero2/0004-dts-add-sunxi-info-device-tree-node.patch
+++ b/recipes-kernel/linux/linux-mainline/orange-pi-zero2/0004-dts-add-sunxi-info-device-tree-node.patch
@ -0,0 +1,27 @@
+From 9a7776b44588c24d04ffff63194d8a137624f8ac Mon Sep 17 00:00:00 2001
+From: Patryk Biel <patryk.biel.external@trumpf.com>
+Date: Thu, 26 Jan 2023 09:50:42 +0100
+Subject: [PATCH] Add sunxi-info device tree node
+
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+index ab344ea8a..d0b95d43a 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+@@ -586,5 +586,10 @@ r_rsb: rsb@7083000 {
+ 			#address-cells = <1>;
+ 			#size-cells = <0>;
+ 		};
+
+		sunxi-info {
+			compatible = "allwinner,sun50i-h616-sys-info";
+			status = "okay";
+		};
+ 	};
+ };
+-- 
+2.34.1
+
--- a/recipes-kernel/linux/linux-mainline/orange-pi-zero2/0005-dts-add-addr_mgt-device-tree-node.patch
+++ b/recipes-kernel/linux/linux-mainline/orange-pi-zero2/0005-dts-add-addr_mgt-device-tree-node.patch
@ -0,0 +1,32 @@
+From 706dc6ed092e4a1b9d84893cb4186fbd354bb1c8 Mon Sep 17 00:00:00 2001
+From: Patryk Biel <patryk.biel.external@trumpf.com>
+Date: Thu, 26 Jan 2023 09:51:22 +0100
+Subject: [PATCH] Add addr_mgt device tree node
+
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+index d0b95d43a..15f45a3f9 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+@@ -591,5 +591,15 @@ sunxi-info {
+ 			compatible = "allwinner,sun50i-h616-sys-info";
+ 			status = "okay";
+ 		};
+
+		addr_mgt {
+			compatible = "allwinner,sunxi-addr_mgt";
+			type_addr_wifi = <0x00>;
+			type_addr_bt = <0x00>;
+			type_addr_eth = <0x00>;
+			status = "okay";
+			linux,phandle = <0x179>;
+			phandle = <0x179>;
+		};
+ 	};
+ };
+-- 
+2.34.1
+
--- a/recipes-kernel/linux/linux-mainline/orange-pi-zero2/0006-drv-modem-power-Power-manager-for-modems.patch
+++ b/recipes-kernel/linux/linux-mainline/orange-pi-zero2/0006-drv-modem-power-Power-manager-for-modems.patch
--- a/recipes-kernel/linux/linux-mainline/orange-pi-zero2/0007-drv-add-sunxi-addr-driver-used-to-fix-uwe5622-bluetooth-.patch
+++ b/recipes-kernel/linux/linux-mainline/orange-pi-zero2/0007-drv-add-sunxi-addr-driver-used-to-fix-uwe5622-bluetooth-.patch
@ -1,65 +1,65 @@
-From 5e8062c5f6500526633934006c2858812961f6f4 Mon Sep 17 00:00:00 2001
-From: OpenEmbedded <oe.patch@oe>
-Date: Wed, 22 May 2024 15:36:46 +0200
-Subject: [PATCH] drv fix MAC address for UWE5622
+From 29cfa9437eaa2ff862ab0f06852383b181b60743 Mon Sep 17 00:00:00 2001
+From: afaulkner420 <afaulkner420@gmail.com>
+Date: Fri, 25 Mar 2022 20:18:18 +0000
+Subject: [PATCH 04/11] Add sunxi-addr driver - Used to fix uwe5622 bluetooth
+ MAC addresses

 ---
 drivers/misc/Kconfig                 |   1 +
 drivers/misc/Makefile                |   1 +
- drivers/misc/sunxi-addr/Kconfig      |   7 +
- drivers/misc/sunxi-addr/Makefile     |   6 +
+ drivers/misc/sunxi-addr/Kconfig      |   6 +
+ drivers/misc/sunxi-addr/Makefile     |   5 +
 drivers/misc/sunxi-addr/sha256.c     | 178 +++++++++++++
 drivers/misc/sunxi-addr/sunxi-addr.c | 358 +++++++++++++++++++++++++++
- 6 files changed, 551 insertions(+)
+ 6 files changed, 549 insertions(+)
 create mode 100644 drivers/misc/sunxi-addr/Kconfig
 create mode 100644 drivers/misc/sunxi-addr/Makefile
 create mode 100644 drivers/misc/sunxi-addr/sha256.c
 create mode 100644 drivers/misc/sunxi-addr/sunxi-addr.c

 diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
-index cadd4a820..605e4d2ba 100644
+index 24cb809ae..52843042f 100644
 --- a/drivers/misc/Kconfig
 +++ b/drivers/misc/Kconfig
-@@ -579,4 +579,5 @@ source "drivers/misc/cardreader/Kconfig"
+@@ -494,4 +494,5 @@ source "drivers/misc/cardreader/Kconfig"
+ source "drivers/misc/habanalabs/Kconfig"
 source "drivers/misc/uacce/Kconfig"
 source "drivers/misc/pvpanic/Kconfig"
- source "drivers/misc/mchp_pci1xxxx/Kconfig"
 +source "drivers/misc/sunxi-addr/Kconfig"
 endmenu
 diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
-index f2a4d1ff6..06e857d70 100644
+index f3eaa577a..0f9280509 100644
 --- a/drivers/misc/Makefile
 +++ b/drivers/misc/Makefile
-@@ -67,3 +67,4 @@ obj-$(CONFIG_TMR_MANAGER)      += xilinx_tmr_manager.o
- obj-$(CONFIG_TMR_INJECT)	+= xilinx_tmr_inject.o
- obj-$(CONFIG_TPS6594_ESM)	+= tps6594-esm.o
- obj-$(CONFIG_TPS6594_PFSM)	+= tps6594-pfsm.o
+@@ -60,3 +60,4 @@ obj-$(CONFIG_XILINX_SDFEC)	+= xilinx_sdfec.o
+ obj-$(CONFIG_HISI_HIKEY_USB)	+= hisi_hikey_usb.o
+ obj-$(CONFIG_HI6421V600_IRQ)	+= hi6421v600-irq.o
+ obj-$(CONFIG_MODEM_POWER)	+= modem-power.o
 +obj-$(CONFIG_SUNXI_ADDR_MGT)    += sunxi-addr/
+\ No newline at end of file
 diff --git a/drivers/misc/sunxi-addr/Kconfig b/drivers/misc/sunxi-addr/Kconfig
 new file mode 100644
-index 000000000..d7d0ca3bd
+index 000000000..801dd2c02
 --- /dev/null
 +++ b/drivers/misc/sunxi-addr/Kconfig
-@@ -0,0 +1,7 @@
+@@ -0,0 +1,6 @@
 +config SUNXI_ADDR_MGT
 +  tristate "Allwinner Network MAC Addess Manager"
 +  depends on BT || ETHERNET || WLAN
 +  depends on NVMEM_SUNXI_SID
 +  help
 +    allwinner network mac address management
-+
 diff --git a/drivers/misc/sunxi-addr/Makefile b/drivers/misc/sunxi-addr/Makefile
 new file mode 100644
-index 000000000..9bafcece5
+index 000000000..f01fd4783
 --- /dev/null
 +++ b/drivers/misc/sunxi-addr/Makefile
-@@ -0,0 +1,6 @@
+@@ -0,0 +1,5 @@
 +#
 +# Makefile for wifi mac addr manager drivers
 +#
 +sunxi_addr-objs := sunxi-addr.o sha256.o
 +obj-$(CONFIG_SUNXI_ADDR_MGT)   += sunxi_addr.o
-+
 diff --git a/drivers/misc/sunxi-addr/sha256.c b/drivers/misc/sunxi-addr/sha256.c
 new file mode 100644
 index 000000000..78825810c
@ -246,7 +246,7 @@ index 000000000..78825810c
 +}
 diff --git a/drivers/misc/sunxi-addr/sunxi-addr.c b/drivers/misc/sunxi-addr/sunxi-addr.c
 new file mode 100644
-index 000000000..3ba0a113f
+index 000000000..a812e4e82
 --- /dev/null
 +++ b/drivers/misc/sunxi-addr/sunxi-addr.c
@@ -0,0 +1,358 @@
@ -292,16 +292,16 @@ index 000000000..3ba0a113f
 +#define IS_TYPE_INVALID(x)  ((x < TYPE_ANY) || (x > TYPE_RAND))
 +
 +#define ADDR_CLASS_ATTR_ADD(name) \
-+static ssize_t addr_##name##_show(const struct class *class, \
-+		const struct class_attribute *attr, char *buffer) \
+static ssize_t addr_##name##_show(struct class *class, \
+		struct class_attribute *attr, char *buffer) \
 +{ \
 +	char addr[ADDR_STR_LEN]; \
 +	if (IS_TYPE_INVALID(get_addr_by_name(ADDR_FMT_STR, addr, #name))) \
 +		return 0; \
 +	return sprintf(buffer, "%.17s\n", addr); \
 +} \
-+static ssize_t addr_##name##_store(const struct class *class, \
-+		const struct class_attribute *attr, \
+static ssize_t addr_##name##_store(struct class *class, \
+		struct class_attribute *attr, \
 +		const char *buffer, size_t count) \
 +{ \
 +	if (count != ADDR_STR_LEN) { \
@ -526,8 +526,8 @@ index 000000000..3ba0a113f
 +	return 0;
 +}
 +
-+static ssize_t summary_show(const struct class *class,
-+				const struct class_attribute *attr, char *buffer)
+static ssize_t summary_show(struct class *class,
+				struct class_attribute *attr, char *buffer)
 +{
 +	int i = 0, ret = 0;
 +
@ -558,6 +558,7 @@ index 000000000..3ba0a113f
 +
 +static struct class addr_class = {
 +	.name = "addr_mgt",
+	.owner = THIS_MODULE,
 +	.class_groups = addr_class_groups,
 +};
 +
@ -607,4 +608,6 @@ index 000000000..3ba0a113f
 +MODULE_AUTHOR("Allwinnertech");
 +MODULE_DESCRIPTION("Network MAC Addess Manager");
 +MODULE_LICENSE("GPL");
-+
+-- 
+2.25.1
+
--- a/recipes-kernel/linux/linux-mainline/orange-pi-zero2/0008-drv-wireless-add-uwe5622-driver.patch
+++ b/recipes-kernel/linux/linux-mainline/orange-pi-zero2/0008-drv-wireless-add-uwe5622-driver.patch
--- a/recipes-kernel/linux/linux-mainline/orange-pi-zero2/0009-drv-uwe5622-bluetooth-fix-firmware-init-fail.patch
+++ b/recipes-kernel/linux/linux-mainline/orange-pi-zero2/0009-drv-uwe5622-bluetooth-fix-firmware-init-fail.patch
@ -0,0 +1,28 @@
+From 70a0c21f9bc1eed754cce584fe382883dc412db0 Mon Sep 17 00:00:00 2001
+From: afaulkner420 <afaulkner420@gmail.com>
+Date: Fri, 25 Mar 2022 20:31:26 +0000
+Subject: [PATCH 08/11] uwe5622: bluetooth: Fix firmware init fail
+
+---
+ net/bluetooth/hci_core.c | 4 ++++
+ 1 file changed, 4 insertions(+)
+
+diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
+index c67390367..b2ee9b6a8 100644
+--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
+@@ -932,7 +932,11 @@ static int __hci_init(struct hci_dev *hdev)
+ 
+ 	err = __hci_req_sync(hdev, hci_init3_req, 0, HCI_INIT_TIMEOUT, NULL);
+ 	if (err < 0)
+#if defined(CONFIG_RK_WIFI_DEVICE_UWE5621) || defined(CONFIG_AW_WIFI_DEVICE_UWE5622)
+		;
+#else
+ 		return err;
+#endif
+ 
+ 	err = __hci_req_sync(hdev, hci_init4_req, 0, HCI_INIT_TIMEOUT, NULL);
+ 	if (err < 0)
+-- 
+2.25.1
+
--- a/recipes-kernel/linux/linux-mainline/orange-pi-zero2/0010-drv-fix-incldue-path-for-unisocwcn.patch
+++ b/recipes-kernel/linux/linux-mainline/orange-pi-zero2/0010-drv-fix-incldue-path-for-unisocwcn.patch
@ -0,0 +1,45 @@
+From bb564341bb6c64003abbf24fd5d5ef254060b040 Mon Sep 17 00:00:00 2001
+From: Patryk Biel <patryk.biel.external@trumpf.com>
+Date: Thu, 19 Jan 2023 10:46:28 +0100
+Subject: [PATCH] Fix incldue path for unisocwcn
+
+---
+ drivers/net/wireless/uwe5622/Makefile           | 4 +++-
+ drivers/net/wireless/uwe5622/unisocwcn/Makefile | 6 +++---
+ 2 files changed, 6 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/net/wireless/uwe5622/Makefile b/drivers/net/wireless/uwe5622/Makefile
+index 313ea5123..e9a398584 100644
+--- a/drivers/net/wireless/uwe5622/Makefile
+++ b/drivers/net/wireless/uwe5622/Makefile
+@@ -2,7 +2,9 @@ obj-$(CONFIG_AW_WIFI_DEVICE_UWE5622) += unisocwcn/
+ obj-$(CONFIG_WLAN_UWE5622)    += unisocwifi/
+ obj-$(CONFIG_TTY_OVERY_SDIO)  += tty-sdio/
+ 
+-UNISOCWCN_DIR := $(shell cd $(src)/unisocwcn/ && /bin/pwd)
+mkfile_path := $(abspath $(lastword $(MAKEFILE_LIST)))
+UNISOCWCN_DIR := $(dir $(mkfile_path))/unisocwcn/
+
+ UNISOC_BSP_INCLUDE := $(UNISOCWCN_DIR)/include
+ export UNISOC_BSP_INCLUDE
+ 
+diff --git a/drivers/net/wireless/uwe5622/unisocwcn/Makefile b/drivers/net/wireless/uwe5622/unisocwcn/Makefile
+index b62652f63..ae6e1e25a 100644
+--- a/drivers/net/wireless/uwe5622/unisocwcn/Makefile
+++ b/drivers/net/wireless/uwe5622/unisocwcn/Makefile
+@@ -119,9 +119,9 @@ ccflags-y += -DCONFIG_WCN_UTILS
+ 
+ #### include path ######
+ ccflags-y += -I$(src)/../tty-sdio
+-ccflags-y += -I$(src)/include/
+-ccflags-y += -I$(src)/platform/
+-ccflags-y += -I$(src)/platform/rf/
+ccflags-y += -I$(srctree)/$(src)/include/
+ccflags-y += -I$(srctree)/$(src)/platform/
+ccflags-y += -I$(srctree)/$(src)/platform/rf/
+ 
+ #### add cflag for Customer ######
+ ### ---------- Hisilicon start ---------- ###
+-- 
+2.34.1
+
--- a/recipes-kernel/linux/linux-mainline/orange-pi-zero2/defconfig
+++ b/recipes-kernel/linux/linux-mainline/orange-pi-zero2/defconfig
--- a/recipes-kernel/linux/linux-mainline/patches/0002-dts-nanopi-neo-air-Add-camera-support.patch
+++ b/recipes-kernel/linux/linux-mainline/patches/0002-dts-nanopi-neo-air-Add-camera-support.patch
@ -1,113 +0,0 @@
-From e0d786f5465d2e2d977696cf0d02c70b78402291 Mon Sep 17 00:00:00 2001
-From: Marek Belisko <marek.belisko@open-nandra.com>
-Date: Tue, 24 Oct 2023 10:42:36 +0200
-Subject: [PATCH] dts:nanopi-neo-air: Add camera support
-
-Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
---
- .../dts/allwinner/sun8i-h3-nanopi-neo-air.dts | 85 +++++++++++++++++++
- 1 file changed, 85 insertions(+)
-
-diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts
-index 9e1a33f94..7a05eff33 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts
-+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-nanopi-neo-air.dts
-@@ -77,6 +77,39 @@ wifi_pwrseq: wifi_pwrseq {
- 		compatible = "mmc-pwrseq-simple";
- 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
- 	};
-+
-+        cam_xclk: cam-xclk {
-+                #clock-cells = <0>;
-+                compatible = "fixed-clock";
-+                clock-frequency = <24000000>;
-+                clock-output-names = "cam-xclk";
-+        };
-+
-+        reg_cam_avdd: cam-avdd {
-+                compatible = "regulator-fixed";
-+                regulator-name = "cam-avdd";
-+                regulator-min-microvolt = <2800000>;
-+                regulator-max-microvolt = <2800000>;
-+                vin-supply = <&reg_vcc3v3>;
-+        };
-+
-+        reg_cam_dovdd: cam-dovdd {
-+                compatible = "regulator-fixed";
-+                regulator-name = "cam-dovdd";
-+                regulator-min-microvolt = <1800000>;
-+                regulator-max-microvolt = <1800000>;
-+                vin-supply = <&reg_vcc3v3>;
-+        };
-+
-+        reg_cam_dvdd: cam-dvdd {
-+                compatible = "regulator-fixed";
-+                regulator-name = "cam-dvdd";
-+                regulator-min-microvolt = <1500000>;
-+                regulator-max-microvolt = <1500000>;
-+                vin-supply = <&reg_vcc3v3>;
-+        };
-+
-+
- };
- 
- &mmc0 {
-@@ -141,3 +174,55 @@ &usbphy {
- 	/* USB VBUS is always on */
- 	status = "okay";
- };
-+
-+&csi {
-+    status = "okay";
-+
-+    port {
-+        #address-cells = <1>;
-+        #size-cells = <0>;
-+
-+        /* Parallel bus endpoint */
-+        csi_from_ov5640: endpoint {
-+            remote-endpoint = <&ov5640_to_csi>;
-+            bus-width = <8>;
-+            data-shift = <2>;
-+            hsync-active = <1>; /* Active high */
-+            vsync-active = <0>; /* Active low */
-+            data-active = <1>;  /* Active high */
-+            pclk-sample = <1>;  /* Rising */
-+        };
-+    };
-+};
-+
-+&i2c2 {
-+   status = "okay";
-+
-+   ov5640: camera@3c {
-+        compatible = "ovti,ov5640";
-+        reg = <0x3c>;
-+        clocks = <&cam_xclk>;
-+        clock-names = "xclk";
-+
-+        reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>;
-+        powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>;
-+        AVDD-supply = <&reg_cam_avdd>;
-+        DOVDD-supply = <&reg_cam_dovdd>;
-+        DVDD-supply = <&reg_cam_dvdd>;
-+
-+        port {
-+            ov5640_to_csi: endpoint {
-+                remote-endpoint = <&csi_from_ov5640>;
-+                bus-width = <8>;
-+                data-shift = <2>;
-+                hsync-active = <1>; /* Active high */
-+                vsync-active = <0>; /* Active low */
-+                data-active = <1>;  /* Active high */
-+                pclk-sample = <1>;  /* Rising */
-+            };
-+        };
-+    };
-+};
-+&i2c2_pins {
-+   bias-pull-up;
-+};
-- 
-2.25.1
-
--- a/recipes-kernel/linux/linux-mainline/patches/0003-dts-allwinner-bananapi-m2-zero-Enforce-consistent-MM.patch
+++ b/recipes-kernel/linux/linux-mainline/patches/0003-dts-allwinner-bananapi-m2-zero-Enforce-consistent-MM.patch
@ -1,30 +0,0 @@
-From 7d7f32460702e99cab48909bb85ed84b67e65062 Mon Sep 17 00:00:00 2001
-From: Marek Belisko <marek.belisko@open-nandra.com>
-Date: Tue, 24 Oct 2023 10:43:55 +0200
-Subject: [PATCH] dts: allwinner: bananapi-m2-zero: Enforce consistent MMC
- numbering
-
-Enforce MMC number (sometimes the order was wrong and the device does not boot).
-
-Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
---
- arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts | 3 +++
- 1 file changed, 3 insertions(+)
-
-diff --git a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts
-index d729b7c70..410a79487 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts
-+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts
-@@ -20,6 +20,9 @@ / {
- 	aliases {
- 		serial0 = &uart0;
- 		serial1 = &uart1;
-+		mmc0 = &mmc0;
-+		mmc1 = &mmc1;
-+		mmc2 = &mmc2;
- 	};
- 
- 	chosen {
-- 
-2.25.1
-
--- a/recipes-kernel/linux/linux-mainline/patches/0004-dts-allwinner-bananapi-m64-Consistent-nodes-for-mmc-devices.patch
+++ b/recipes-kernel/linux/linux-mainline/patches/0004-dts-allwinner-bananapi-m64-Consistent-nodes-for-mmc-devices.patch
@ -1,27 +0,0 @@
-From f487f62babb11d014da7a0b58a0fcdf6d217a812 Mon Sep 17 00:00:00 2001
-From: Marek Belisko <marek.belisko@open-nandra.com>
-Date: Thu, 11 May 2023 11:18:33 +0200
-Subject: [PATCH] bananapi-m64: Consistent nodes for mmc devices
-
-Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
---
- arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts | 3 +++
- 1 file changed, 3 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
-index e6d5bc0f7..39a28aad8 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
-@@ -16,6 +16,9 @@ aliases {
- 		ethernet0 = &emac;
- 		serial0 = &uart0;
- 		serial1 = &uart1;
-+                mmc0 = &mmc0;
-+                mmc1 = &mmc1;
-+                mmc2 = &mmc2;
- 	};
- 
- 	chosen {
-- 
-2.25.1
-
--- a/recipes-kernel/linux/linux-mainline/patches/0005-ARM-dts-sunxi-Add-MMC-alias-for-consistent-enumerati.patch
+++ b/recipes-kernel/linux/linux-mainline/patches/0005-ARM-dts-sunxi-Add-MMC-alias-for-consistent-enumerati.patch
@ -1,31 +0,0 @@
-From 8b245b30a451bc4a4081759a6918b630ec075a7c Mon Sep 17 00:00:00 2001
-From: Stefan Gloor <code@stefan-gloor.ch>
-Date: Thu, 19 Dec 2024 10:34:54 +0100
-Subject: [PATCH] ARM: dts: sunxi: Add MMC alias for consistent enumeration
-
-Add explicit alias for MMC devices, so that (e)MMC and micro SD cards
-are enumerated consistenly. This should fix spurious boot failures when
-specifying a hard-coded root partition, e.g., mmcblk0p2.
-
-Signed-off-by: Stefan Gloor <code@stefan-gloor.ch>
-Upstream-Status: Denied https://lore.kernel.org/lkml/CAGb2v67dBhL3-AhLeHg3xOgbNZ3qu0aj9+kA+MoOMRYfr_Z_zQ@mail.gmail.com/
---
- arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro.dts | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro.dts
-index a1b89b2a2999..9cd1eb690134 100644
--- a/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro.dts
-+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro.dts
-@@ -60,6 +60,8 @@ aliases {
- 		serial2 = &uart7;
- 		spi0 = &spi1;
- 		spi1 = &spi2;
-+		mmc0 = &mmc0;
-+		mmc1 = &mmc3;
- 	};
- 
- 	chosen {
-- 
-2.45.2
-
--- a/recipes-kernel/linux/linux-mainline/patches/0006-dts-allwinner-orangepi-zero-mmc-aliases-for-consiste.patch
+++ b/recipes-kernel/linux/linux-mainline/patches/0006-dts-allwinner-orangepi-zero-mmc-aliases-for-consiste.patch
@ -1,32 +0,0 @@
-From a2d765aab2989ba080b8f63cb0489d6a531cb3fd Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Oliver=20K=C3=A4stner?= <git@oliver-kaestner.de>
-Date: Sun, 16 Mar 2025 22:36:53 +0100
-Subject: [PATCH] dts: allwinner: orangepi-zero: mmc aliases for consistent
- enumeration
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This fixes random boot failures.
-
-Upstream-Status: Inappropriate [https://github.com/linux-sunxi/meta-sunxi/pull/431]
-
-Signed-off-by: Oliver Kästner <git@oliver-kaestner.de>
---
- arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts | 3 +++
- 1 file changed, 3 insertions(+)
-
-diff --git a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
-index ca94e313f..570a88327 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
-+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
-@@ -59,6 +59,9 @@ aliases {
- 		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
- 		ethernet0 = &emac;
- 		ethernet1 = &xr819;
-+		mmc0 = &mmc0; /* microSD */
-+		mmc1 = &mmc1; /* XR819 WiFi */
-+		mmc2 = &mmc2;
- 	};
- 
- 	chosen {
--- a/recipes-kernel/linux/linux-mainline/sun9i/defconfig
+++ b/recipes-kernel/linux/linux-mainline/sun9i/defconfig
--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/add-nodes-for-sunxi-info-addr-dump-reg.patch
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/add-nodes-for-sunxi-info-addr-dump-reg.patch
@ -1,72 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: The-going <48602507+The-going@users.noreply.github.com>
-Date: Sat, 16 Apr 2022 11:51:35 +0300
-Subject: add nodes for sunxi-info, sunxi-addr and sunxi-dump-reg
-
---
- arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 19 ++++++++++
- 1 file changed, 19 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
-index 538c90663602..6365cce07304 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
-@@ -1243,6 +1243,25 @@ ths: thermal-sensor@5070400 {
- 			nvmem-cell-names = "calibration";
- 			#thermal-sensor-cells = <1>;
- 		};
-+
-+		sunxi-info {
-+			compatible = "allwinner,sun50i-h6-sys-info";
-+			status = "okay";
-+		};
-+
-+		addr_mgt: addr-mgt {
-+			compatible = "allwinner,sunxi-addr_mgt";
-+			type_addr_wifi = <0x2>;
-+			type_addr_bt = <0x2>;
-+			type_addr_eth = <0x2>;
-+			status = "okay";
-+		};
-+
-+		dump_reg: dump_reg@20000 {
-+			compatible = "allwinner,sunxi-dump-reg";
-+			reg = <0x0 0x03001000 0x0 0x0f20>;
-+			status = "okay";
-+		};
- 	};
- 
- 	thermal-zones {
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-index 98735d39e6e8..5ff1b357a25b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-@@ -1053,6 +1053,25 @@ ths: thermal-sensor@5070400 {
- 			nvmem-cell-names = "calibration";
- 			#thermal-sensor-cells = <1>;
- 		};
-+
-+		dump_reg: dump_reg@20000 {
-+			compatible = "allwinner,sunxi-dump-reg";
-+			reg = <0x0 0x03001000 0x0 0x0f20>;
-+			status = "okay";
-+		};
-+
-+		sunxi-info {
-+			compatible = "allwinner,sun50i-h616-sys-info";
-+			status = "okay";
-+		};
-+
-+		addr_mgt: addr-mgt {
-+			compatible = "allwinner,sunxi-addr_mgt";
-+			type_addr_wifi = <0x2>;
-+			type_addr_bt = <0x2>;
-+			type_addr_eth = <0x2>;
-+			status = "okay";
-+		};
- 	};
- 
- 	thermal-zones {
-- 
-Armbian
-
--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-h616-Add-device-node-for-SID.patch
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-h616-Add-device-node-for-SID.patch
@ -1,41 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Kali Prasad <kprasadvnsi@protonmail.com>
-Date: Sun, 19 Sep 2021 08:02:27 +0000
-Subject: arm64: dts: allwinner: h616: Add device node for SID
-
-The device tree binding for H616's SID controller.
-
-Signed-off-by: Kali Prasad <kprasadvnsi@protonmail.com>
---
- arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 15 ++++++++++
- 1 file changed, 15 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-index 45359b0d317a..7ad1982fb47f 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-@@ -171,6 +171,21 @@ ccu: clock@3001000 {
- 			#reset-cells = <1>;
- 		};
- 
-+		sid: efuse@3006000 {
-+			compatible = "allwinner,sun50i-h616-sid";
-+			reg = <0x03006000 0x1000>;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			cpu_speed_grade: cpu-speed-grade@0 {
-+				reg = <0x00 0x02>;
-+			};
-+
-+			ths_calibration: thermal-sensor-calibration@14 {
-+				reg = <0x14 0x8>;
-+			};
-+		};
-+
- 		watchdog: watchdog@30090a0 {
- 			compatible = "allwinner,sun50i-h616-wdt",
- 				     "allwinner,sun6i-a31-wdt";
-- 
-Armbian
-
--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-h616-Add-efuse_xlate-cpu-frequency-scaling-v1_6_2.patch
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-h616-Add-efuse_xlate-cpu-frequency-scaling-v1_6_2.patch
@ -1,473 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: AGM1968 <AGM1968@users.noreply.github.com>
-Date: Tue, 23 May 2023 16:43:00 +0000
-Subject: arm64-dts-allwinner-h616-Add-efuse_xlate-cpu-frequency-scaling-v1_6_2
- arch/arm64/boot/dts/allwinner/sun50i-h616-cpu-opp.dtsi
- arch/arm64/boot/dts/allwinner/sun50i-h618-cpu-dvfs.dtsi
- arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
- drivers/cpufreq/cpufreq-dt-platdev.c drivers/cpufreq/sun50i-cpufreq-nvmem.c
-
-Signed-off-by: AGM1968 <AGM1968@users.noreply.github.com>
---
- arch/arm64/boot/dts/allwinner/sun50i-h616-cpu-opp.dtsi       | 75 ++++++++
- arch/arm64/boot/dts/allwinner/sun50i-h618-cpu-dvfs.dtsi      | 64 +++++++++++++
- arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi |  1 +
- arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts |  5 +
- arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts | 62 ++-----------
- drivers/cpufreq/cpufreq-dt-platdev.c                         |  2 +
- drivers/cpufreq/sun50i-cpufreq-nvmem.c                       | 92 +++++++---
- 7 files changed, 221 insertions(+), 80 deletions(-)
- create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h618-cpu-dvfs.dtsi
- 
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-cpu-opp.dtsi
-new file mode 100644
-index 000000000000..36f2950367c6
--- /dev/null
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-cpu-opp.dtsi
-@@ -0,0 +1,75 @@
-+//SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-+//Testing Version 1  from: AGM1968 <AGM1968@users.noreply.github.com>
-+//Noted: PLL_CPUX = 24 MHz*N/P (WIP)
-+
-+/ {
-+	cpu_opp_table: opp-table-cpu {
-+		compatible = "allwinner,sun50i-h616-operating-points";
-+		nvmem-cells = <&cpu_speed_grade>;
-+		opp-shared;
-+ 
-+		opp-480000000 {
-+			clock-latency-ns = <244144>; /* 8 32k periods */
-+			opp-hz = /bits/ 64 <480000000>;
-+			opp-microvolt-speed0 = <820000 820000 1100000>; 
-+			opp-microvolt-speed1 = <880000 880000 1100000>;
-+			opp-microvolt-speed2 = <880000 880000 1100000>;
-+		};
-+	
-+		opp-600000000 {
-+			clock-latency-ns = <244144>; /* 8 32k periods */
-+			opp-hz = /bits/ 64 <600000000>;
-+			opp-microvolt-speed0 = <820000 820000 1100000>;
-+			opp-microvolt-speed1 = <880000 880000 1100000>;
-+			opp-microvolt-speed2 = <880000 880000 1100000>;
-+		};
-+
-+		opp-792000000 {
-+			clock-latency-ns = <244144>; /* 8 32k periods */
-+			opp-hz = /bits/ 64 <792000000>;
-+		        opp-microvolt-speed0 = <860000 860000 1100000>;
-+			opp-microvolt-speed1 = <940000 940000 1100000>;
-+			opp-microvolt-speed2 = <940000 940000 1100000>;
-+		};
-+
-+		opp-1008000000 {
-+			clock-latency-ns = <244144>; /* 8 32k periods */
-+			opp-hz = /bits/ 64 <1008000000>;
-+			opp-microvolt-speed0 = <900000 900000 1100000>;
-+			opp-microvolt-speed1 = <1020000 1020000 1100000>;
-+			opp-microvolt-speed2 = <1020000 1020000 1100000>;
-+		};
-+
-+		opp-1200000000 {
-+			clock-latency-ns = <244144>; /* 8 32k periods */
-+			opp-hz = /bits/ 64 <1200000000>;
-+			opp-microvolt-speed0 = <960000 960000 1100000>;
-+			opp-microvolt-speed1 = <1100000 1100000 1100000>;
-+			opp-microvolt-speed2 = <1100000 1100000 1100000>;
-+		};
-+
-+		opp-1512000000 {
-+			clock-latency-ns = <244144>; /* 8 32k periods */
-+			opp-hz = /bits/ 64 <1512000000>;
-+			opp-microvolt-speed0 = <1100000 1100000 1100000>;
-+			opp-microvolt-speed1 = <1100000 1100000 1100000>;
-+			opp-microvolt-speed2 = <1100000 1100000 1100000>;
-+		};
-+	};
-+};
-+
-+&cpu0 {
-+	operating-points-v2 = <&cpu_opp_table>;
-+};
-+ 
-+&cpu1 {
-+	operating-points-v2 = <&cpu_opp_table>;
-+};
-+ 
-+&cpu2 {
-+	operating-points-v2 = <&cpu_opp_table>;
-+};
-+ 
-+&cpu3 {
-+	operating-points-v2 = <&cpu_opp_table>;
-+};
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
-index 0666d16ba7d0..54d706286554 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
-@@ -7,6 +7,7 @@
-  */
- 
- #include "sun50i-h616.dtsi"
-+#include "sun50i-h616-cpu-opp.dtsi"
- 
- #include <dt-bindings/gpio/gpio.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-index 8d8009c7f9a3..41a5a4013091 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-@@ -12,6 +12,11 @@ / {
- 	compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616";
- };
- 
-+&cpu0  {
-+	cpu-supply = <&reg_dcdca>;
-+	status = "okay";
-+};
-+
- &emac0 {
- 	phy-supply = <&reg_dcdce>;
- };
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-cpu-dvfs.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h618-cpu-dvfs.dtsi
-new file mode 100644
-index 0000000000000..0509e3fb22e26
--- /dev/null
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-cpu-dvfs.dtsi
-@@ -0,0 +1,64 @@
-+
-+
-+&r_i2c {
-+	status = "okay";
-+
-+	axp313: pmic@36 {
-+		compatible = "x-powers,axp313a";
-+		reg = <0x36>;
-+		#interrupt-cells = <1>;
-+		interrupt-controller;
-+		interrupt-parent = <&pio>;
-+		interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>;	/* PC9 */
-+
-+		vin1-supply = <&reg_vcc5v>;
-+		vin2-supply = <&reg_vcc5v>;
-+		vin3-supply = <&reg_vcc5v>;
-+
-+		regulators {
-+			/* Supplies VCC-PLL and DRAM */
-+			reg_aldo1: aldo1 {
-+				regulator-always-on;
-+				regulator-min-microvolt = <1800000>;
-+				regulator-max-microvolt = <1800000>;
-+				regulator-name = "vcc1v8";
-+			};
-+
-+			/* Supplies VCC-IO, so needs to be always on. */
-+			reg_dldo1: dldo1 {
-+				regulator-always-on;
-+				regulator-min-microvolt = <3300000>;
-+				regulator-max-microvolt = <3300000>;
-+				regulator-name = "vcc3v3";
-+			};
-+
-+			reg_dcdc1: dcdc1 {
-+				regulator-always-on;
-+				regulator-min-microvolt = <810000>;
-+				regulator-max-microvolt = <990000>;
-+				regulator-step-delay-us = <25>;
-+				regulator-final-delay-us = <50>;
-+				regulator-name = "vdd-gpu-sys";
-+			};
-+
-+			reg_dcdc2: dcdc2 {
-+				regulator-always-on;
-+				regulator-min-microvolt = <500000>;
-+				regulator-max-microvolt = <1100000>;
-+				regulator-step-delay-us = <25>;
-+				regulator-final-delay-us = <50>;
-+				regulator-ramp-delay = <200>;
-+				regulator-name = "vdd-cpu";
-+			};
-+
-+			reg_dcdc3: dcdc3 {
-+				regulator-always-on;
-+				regulator-min-microvolt = <1100000>;
-+				regulator-max-microvolt = <1100000>;
-+				regulator-step-delay-us = <25>;
-+				regulator-final-delay-us = <50>;
-+				regulator-name = "vdd-dram";
-+			};
-+		};
-+	};
-+};
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
-index 00fe28caac93..edbfc83f390a 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
-@@ -6,12 +6,18 @@
- /dts-v1/;
- 
- #include "sun50i-h616-orangepi-zero.dtsi"
-+#include "sun50i-h618-cpu-dvfs.dtsi"
- 
- / {
- 	model = "OrangePi Zero3";
- 	compatible = "xunlong,orangepi-zero3", "allwinner,sun50i-h618";
- };
- 
-+&cpu0 {
-+	cpu-supply = <&reg_dcdc2>;
-+	status = "okay";
-+};
-+
- &emac0 {
- 	phy-supply = <&reg_dldo1>;
- };
-@@ -31,62 +37,6 @@ &mmc0 {
- 	vmmc-supply = <&reg_dldo1>;
- };
- 
-&r_i2c {
-	status = "okay";
-
-	axp313: pmic@36 {
-		compatible = "x-powers,axp313a";
-		reg = <0x36>;
-		#interrupt-cells = <1>;
-		interrupt-controller;
-		interrupt-parent = <&pio>;
-		interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>;	/* PC9 */
-
-		vin1-supply = <&reg_vcc5v>;
-		vin2-supply = <&reg_vcc5v>;
-		vin3-supply = <&reg_vcc5v>;
-
-		regulators {
-			/* Supplies VCC-PLL, so needs to be always on. */
-			reg_aldo1: aldo1 {
-				regulator-always-on;
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-name = "vcc1v8";
-			};
-
-			/* Supplies VCC-IO, so needs to be always on. */
-			reg_dldo1: dldo1 {
-				regulator-always-on;
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-name = "vcc3v3";
-			};
-
-			reg_dcdc1: dcdc1 {
-				regulator-always-on;
-				regulator-min-microvolt = <810000>;
-				regulator-max-microvolt = <990000>;
-				regulator-name = "vdd-gpu-sys";
-			};
-
-			reg_dcdc2: dcdc2 {
-				regulator-always-on;
-				regulator-min-microvolt = <810000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-name = "vdd-cpu";
-			};
-
-			reg_dcdc3: dcdc3 {
-				regulator-always-on;
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-name = "vdd-dram";
-			};
-		};
-	};
-};
-
- &pio {
- 	vcc-pc-supply = <&reg_dldo1>;
- 	vcc-pf-supply = <&reg_dldo1>;
-diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
-index fb2875ce1fdd..e63d36839769 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
-+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
-@@ -104,6 +104,8 @@ static const struct of_device_id allowlist[] __initconst = {
-  */
- static const struct of_device_id blocklist[] __initconst = {
- 	{ .compatible = "allwinner,sun50i-h6", },
-+	{ .compatible = "allwinner,sun50i-h616", },
-+	{ .compatible = "allwinner,sun50i-h618", },
- 
- 	{ .compatible = "apple,arm-platform", },
- 
-diff --git a/drivers/cpufreq/sun50i-cpufreq-nvmem.c b/drivers/cpufreq/sun50i-cpufreq-nvmem.c
-index 6845ab5034ec..5d85bfe475de 100644
--- a/drivers/cpufreq/sun50i-cpufreq-nvmem.c
-+++ b/drivers/cpufreq/sun50i-cpufreq-nvmem.c
-@@ -6,6 +6,9 @@
-  * provide the OPP framework with required information.
-  *
-  * Copyright (C) 2019 Yangtao Li <tiny.windzz@gmail.com>
-+ *
-+ * ADD efuse_xlate to extract SoC version so that h6 and h616 can coexist.
-+ * Version 1 AGM1968 <AGM1968@users.noreply.github.com>
-  */
- 
- #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-@@ -20,25 +23,62 @@
- 
- #define MAX_NAME_LEN	7
- 
-#define NVMEM_MASK	0x7
-#define NVMEM_SHIFT	5
-+#define SUN50I_H616_NVMEM_MASK 0x22
-+#define SUN50I_H616_NVMEM_SHIFT 5
-+#define SUN50I_H6_NVMEM_MASK 0x7
-+#define SUN50I_H6_NVMEM_SHIFT 5
-+
-+struct sunxi_cpufreq_soc_data {
-+	u32 (*efuse_xlate) (void *efuse);
-+};
- 
- static struct platform_device *cpufreq_dt_pdev, *sun50i_cpufreq_pdev;
- 
-+static u32 sun50i_h616_efuse_xlate(void *efuse)
-+{
-+   u32 efuse_value = (*(u32 *)efuse >> SUN50I_H616_NVMEM_SHIFT) &
-+             SUN50I_H616_NVMEM_MASK;
-+
-+   /* Tested as V1 h616 soc. Expected efuse values are 1 - 3,
-+      slowest to fastest */
-+   if (efuse_value >=1 && efuse_value <= 3)
-+       return efuse_value - 1;
-+   else
-+       return 0;
-+};
-+
-+static u32 sun50i_h6_efuse_xlate(void *efuse)
-+{
-+   u32 efuse_value = (*(u32 *)efuse >> SUN50I_H6_NVMEM_SHIFT) &
-+             SUN50I_H6_NVMEM_MASK;
-+
-+   /*
-+    * We treat unexpected efuse values as if the SoC was from
-+    * the slowest bin. Expected efuse values are 1 - 3, slowest
-+    * to fastest.
-+   */
-+   if (efuse_value >= 1 && efuse_value <= 3)
-+       return efuse_value - 1;
-+   else
-+       return 0;
-+};
-+
-+
- /**
-  * sun50i_cpufreq_get_efuse() - Determine speed grade from efuse value
-+ * @soc_data: pointer to sunxi_cpufreq_soc_data context
-  * @versions: Set to the value parsed from efuse
-  *
-  * Returns 0 if success.
-  */
-static int sun50i_cpufreq_get_efuse(u32 *versions)
-+static int sun50i_cpufreq_get_efuse(const struct sunxi_cpufreq_soc_data *soc_data,
-+		u32 *versions)
- {
- 	struct nvmem_cell *speedbin_nvmem;
- 	struct device_node *np;
- 	struct device *cpu_dev;
-	u32 *speedbin, efuse_value;
-+	u32 *speedbin;
- 	size_t len;
-	int ret;
- 
- 	cpu_dev = get_cpu_device(0);
- 	if (!cpu_dev)
-@@ -47,10 +87,9 @@ static int sun50i_cpufreq_get_efuse(u32 *versions)
- 	np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
- 	if (!np)
- 		return -ENOENT;
-
-	ret = of_device_is_compatible(np,
-				      "allwinner,sun50i-h6-operating-points");
-	if (!ret) {
-+	if (of_device_is_compatible(np, "allwinner,sun50i-h6-operating-points")) {}
-+	else if (of_device_is_compatible(np, "allwinner,sun50i-h616-operating-points")) {}
-+	else {
- 		of_node_put(np);
- 		return -ENOENT;
- 	}
-@@ -66,17 +105,7 @@ static int sun50i_cpufreq_get_efuse(u32 *versions)
- 	if (IS_ERR(speedbin))
- 		return PTR_ERR(speedbin);
- 
-	efuse_value = (*speedbin >> NVMEM_SHIFT) & NVMEM_MASK;
-
-	/*
-	 * We treat unexpected efuse values as if the SoC was from
-	 * the slowest bin. Expected efuse values are 1-3, slowest
-	 * to fastest.
-	 */
-	if (efuse_value >= 1 && efuse_value <= 3)
-		*versions = efuse_value - 1;
-	else
-		*versions = 0;
-+	*versions = soc_data->efuse_xlate(speedbin);
- 
- 	kfree(speedbin);
- 	return 0;
-@@ -84,18 +113,23 @@ static int sun50i_cpufreq_get_efuse(u32 *versions)
- 
- static int sun50i_cpufreq_nvmem_probe(struct platform_device *pdev)
- {
-+	const struct of_device_id *match;
- 	int *opp_tokens;
- 	char name[MAX_NAME_LEN];
- 	unsigned int cpu;
- 	u32 speed = 0;
- 	int ret;
- 
-+	match = dev_get_platdata(&pdev->dev);
-+	if (!match)
-+		return -EINVAL;
-+
- 	opp_tokens = kcalloc(num_possible_cpus(), sizeof(*opp_tokens),
- 			     GFP_KERNEL);
- 	if (!opp_tokens)
- 		return -ENOMEM;
- 
-	ret = sun50i_cpufreq_get_efuse(&speed);
-+	ret = sun50i_cpufreq_get_efuse(match-> data, &speed);
- 	if (ret) {
- 		kfree(opp_tokens);
- 		return ret;
-@@ -159,8 +193,18 @@ static struct platform_driver sun50i_cpufreq_driver = {
- 	},
- };
- 
-+static const struct sunxi_cpufreq_soc_data sun50i_h616_data = {
-+    .efuse_xlate = sun50i_h616_efuse_xlate,
-+};
-+
-+static const struct sunxi_cpufreq_soc_data sun50i_h6_data = {
-+    .efuse_xlate = sun50i_h6_efuse_xlate,
-+};
-+
- static const struct of_device_id sun50i_cpufreq_match_list[] = {
-	{ .compatible = "allwinner,sun50i-h6" },
-+	{ .compatible = "allwinner,sun50i-h6", .data = &sun50i_h6_data },
-+        { .compatible = "allwinner,sun50i-h616", .data = &sun50i_h616_data },
-+        { .compatible = "allwinner,sun50i-h618", .data = &sun50i_h616_data },
- 	{}
- };
- MODULE_DEVICE_TABLE(of, sun50i_cpufreq_match_list);
-@@ -196,8 +239,8 @@ static int __init sun50i_cpufreq_init(void)
- 		return ret;
- 
- 	sun50i_cpufreq_pdev =
-		platform_device_register_simple("sun50i-cpufreq-nvmem",
-						-1, NULL, 0);
-+		platform_device_register_data(NULL,
-+		"sun50i-cpufreq-nvmem", -1, match, sizeof(*match));
- 	ret = PTR_ERR_OR_ZERO(sun50i_cpufreq_pdev);
- 	if (ret == 0)
- 		return 0;
-- 
-Armbian
-
--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-h616-Add-thermal-sensor-and-thermal-zones.patch
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-h616-Add-thermal-sensor-and-thermal-zones.patch
@ -1,135 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: Kali Prasad <kprasadvnsi@protonmail.com>
-Date: Sun, 19 Sep 2021 08:02:27 +0000
-Subject: arm64: dts: allwinner: h616: Add thermal sensor and thermal zones
-
-There are four sensors, CPU, GPU, VE, and DDR.
-
-Signed-off-by: Kali Prasad <kprasadvnsi@protonmail.com>
---
- arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 75 ++++++++++
- 1 file changed, 75 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-index 7ad1982fb47f..8628a9e3dfca 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-@@ -9,6 +9,7 @@
- #include <dt-bindings/clock/sun6i-rtc.h>
- #include <dt-bindings/reset/sun50i-h616-ccu.h>
- #include <dt-bindings/reset/sun50i-h6-r-ccu.h>
-+#include <dt-bindings/thermal/thermal.h>
- 
- / {
- 	interrupt-parent = <&gic>;
-@@ -25,6 +26,8 @@ cpu0: cpu@0 {
- 			reg = <0>;
- 			enable-method = "psci";
- 			clocks = <&ccu CLK_CPUX>;
-+			clock-latency-ns = <244144>; /* 8 32k periods */
-+			#cooling-cells = <2>;
- 		};
- 
- 		cpu1: cpu@1 {
-@@ -33,6 +36,8 @@ cpu1: cpu@1 {
- 			reg = <1>;
- 			enable-method = "psci";
- 			clocks = <&ccu CLK_CPUX>;
-+			clock-latency-ns = <244144>; /* 8 32k periods */
-+			#cooling-cells = <2>;
- 		};
- 
- 		cpu2: cpu@2 {
-@@ -41,6 +46,8 @@ cpu2: cpu@2 {
- 			reg = <2>;
- 			enable-method = "psci";
- 			clocks = <&ccu CLK_CPUX>;
-+			clock-latency-ns = <244144>; /* 8 32k periods */
-+			#cooling-cells = <2>;
- 		};
- 
- 		cpu3: cpu@3 {
-@@ -49,6 +56,8 @@ cpu3: cpu@3 {
- 			reg = <3>;
- 			enable-method = "psci";
- 			clocks = <&ccu CLK_CPUX>;
-+			clock-latency-ns = <244144>; /* 8 32k periods */
-+			#cooling-cells = <2>;
- 		};
- 	};
- 
-@@ -833,5 +842,71 @@ r_rsb: rsb@7083000 {
- 			#address-cells = <1>;
- 			#size-cells = <0>;
- 		};
-+
-+		ths: thermal-sensor@5070400 {
-+			compatible = "allwinner,sun50i-h616-ths";
-+			reg = <0x05070400 0x400>;
-+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ccu CLK_BUS_THS>;
-+			clock-names = "bus";
-+			resets = <&ccu RST_BUS_THS>;
-+			nvmem-cells = <&ths_calibration>;
-+			nvmem-cell-names = "calibration";
-+			#thermal-sensor-cells = <1>;
-+		};
-+	};
-+
-+	thermal-zones {
-+		cpu-thermal {
-+			polling-delay-passive = <500>;
-+			polling-delay = <1000>;
-+			thermal-sensors = <&ths 2>;
-+			sustainable-power = <1000>;
-+			k_po = <20>;
-+			k_pu = <40>;
-+			k_i = <0>;
-+
-+			trips {
-+				cpu_threshold: trip-point@0 {
-+					temperature = <60000>;
-+					type = "passive";
-+					hysteresis = <0>;
-+				};
-+				cpu_target: trip-point@1 {
-+					temperature = <70000>;
-+					type = "passive";
-+					hysteresis = <0>;
-+				};
-+			};
-+
-+			cooling-maps {
-+				map0 {
-+					trip = <&cpu_target>;
-+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-+				};
-+			};
-+		};
-+
-+		gpu-thermal {
-+			polling-delay-passive = <500>;
-+			polling-delay = <1000>;
-+			thermal-sensors = <&ths 0>;
-+			sustainable-power = <1100>;
-+		};
-+
-+		ve-thermal {
-+			polling-delay-passive = <0>;
-+			polling-delay = <0>;
-+			thermal-sensors = <&ths 1>;
-+		};
-+
-+		ddr-thermal {
-+			polling-delay-passive = <0>;
-+			polling-delay = <0>;
-+			thermal-sensors = <&ths 3>;
-+		};
- 	};
- };
-- 
-Armbian
-
--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-h616-Fix-thermal-zones-missing-trips.patch
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-h616-Fix-thermal-zones-missing-trips.patch
@ -1,73 +0,0 @@
-From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Micha=C5=82=20Dzieko=C5=84ski?=
- <michal.dziekonski+github@gmail.com>
-Date: Wed, 3 May 2023 12:17:28 +0000
-Subject: arm64: dts: allwinner: h616: Fix thermal zones (add missing trips)
-
-Signed-off-by: Michal Dziekonski <michal.dziekonski+github@gmail.com>
---
- arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 29 ++++++++++
- 1 file changed, 29 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-index 8628a9e3dfca..17b13d3193cc 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-@@ -877,6 +877,11 @@ cpu_target: trip-point@1 {
- 					type = "passive";
- 					hysteresis = <0>;
- 				};
-+				cpu_temp_critical: trip-point@2 {
-+					temperature = <110000>;
-+					type = "critical";
-+					hysteresis = <0>;
-+				};
- 			};
- 
- 			cooling-maps {
-@@ -895,18 +900,42 @@ gpu-thermal {
- 			polling-delay = <1000>;
- 			thermal-sensors = <&ths 0>;
- 			sustainable-power = <1100>;
-+
-+			trips {
-+				gpu_temp_critical: trip-point@0 {
-+					temperature = <110000>;
-+					type = "critical";
-+					hysteresis = <0>;
-+				};
-+			};
- 		};
- 
- 		ve-thermal {
- 			polling-delay-passive = <0>;
- 			polling-delay = <0>;
- 			thermal-sensors = <&ths 1>;
-+
-+			trips {
-+				ve_temp_critical: trip-point@0 {
-+					temperature = <110000>;
-+					type = "critical";
-+					hysteresis = <0>;
-+				};
-+			};
- 		};
- 
- 		ddr-thermal {
- 			polling-delay-passive = <0>;
- 			polling-delay = <0>;
- 			thermal-sensors = <&ths 3>;
-+
-+			trips {
-+				ddr_temp_critical: trip-point@0 {
-+					temperature = <110000>;
-+					type = "critical";
-+					hysteresis = <0>;
-+				};
-+			};
- 		};
- 	};
- };
-- 
-Armbian
-
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Marek Belisko	7df2e3d132	orange-pi-zero2: Added wifi firmware Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>	2023-02-02 20:35:35 +01:00
Marek Belisko	577edca3d1	Add UWE5622 wifi driver and required firmwmare Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> Signed-off-by: pbiel <pbiel7@gmail.com>	2023-02-02 20:35:35 +01:00
Marek Belisko	ea93a2dd03	linux-mainline: Added orangepi-zero-2 support patches Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> Signed-off-by: pbiel <pbiel7@gmail.com>	2023-02-02 20:35:35 +01:00
Marek Belisko	948205c553	conf: Added machine definition for orange-pi-zero-2 Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com> Signed-off-by: pbiel <pbiel7@gmail.com>	2023-02-02 20:35:30 +01:00
Marek Belisko	fde5948e85	Merge pull request #362 from spanceac/A13_boot_fix Fix boot of A13 based machines	2023-01-31 08:38:29 +01:00
Marek Belisko	7b05a7ea5f	Merge pull request #361 from qpmr/kirkstone-add-pi-one-plus-support conf: machine: Add "Orange Pi One Plus" support	2023-01-31 08:17:42 +01:00
Sebastian Panceac	2dc45f3cdc	Fix boot of A13 based machines This commit backports an u-boot patch that adds a compatible string for the Allwinner Sun4i-A10 I2C controller. This will fix the boot process freeze after SPL stage for A13 based machines Signed-off-by: Sebastian Panceac <spanceac@gmail.com>	2023-01-30 23:31:53 +02:00
Ilja Byckevich	2d229d2ca0	conf: machine: Add "Orange Pi One Plus" support Signed-off-by: Ilja Byckevich <iljabyckevich@gmail.com>	2023-01-30 20:13:27 +03:00
Marek Belisko	d1a076fbea	Merge pull request #360 from linux-sunxi/core-image-sato-fixes Core image sato fixes	2023-01-25 13:31:11 +01:00
Marek Belisko	7371198497	xserver-xorg: Added xshmfence dependency Fixes following: ERROR: Problem encountered: DRI3 requested, but xshmfence not found Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>	2023-01-23 10:36:20 +01:00
Marek Belisko	35e9d23058	mega-gl: Added more dependencies to fix config issue Fix following: ERROR: Problem encountered: xlib based GLX requires at least one gallium driver Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>	2023-01-23 10:35:38 +01:00
Marek Belisko	56dec0cd0f	sunxi.inc: Drop xf86-video-turbo It cannot be compiled anymore drop it. Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>	2023-01-23 10:33:56 +01:00
Marek Belisko	df4da8dd06	Merge pull request #353 from spanceac/patch-2 Use correct arch in sun5i.inc - Kirkstone	2022-12-05 09:24:40 +01:00
Sebastian Panceac	2d86e00d7e	Use correct arch in sun5i.inc Cortex-A8 architecture is ARMv7A. Before this path fix the following failure was triggered when building for "olinuxino-a13" machine: " [..]/meta-sunxi/conf/machine/include/sun5i.inc:3: Could not include required file conf/machine/include/arm/armv8a/tune-cortexa8.inc "	2022-11-29 15:51:19 +02:00
Marek Belisko	5f4a85b92b	Merge pull request #350 from jakub-kozlowicz/kirkstone Add NanoPi Duo2 board support	2022-11-16 09:55:17 +01:00
Jakub Kozłowicz	9aab097e6b	add nanopi duo2 board support	2022-11-15 21:40:54 +01:00
Christophe Blaess	773dc04614	Fix `LICENSE` field of some recipes to correspond to Poky ones.	2022-09-12 07:27:30 +02:00
Anthony Papillon	eeb1cefdd4	Fix inherit distutils3 error	2022-09-09 08:24:40 +02:00
Marek Belisko	ebdbb33410	u-boot: Fix booting issues for 64bit boards In kirkstone we use u-boot 2022.01 which added as mandatory usage of scp. As it's used for power relates stuff and we don't need it atm set to to empty. Without this fix generated u-boot cannot boot. Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>	2022-08-24 14:05:50 +02:00