Merge pull request #443 from okaestne/chore/kernel-cleanup

chore: clean up old kernel versions and fix KERNEL_DEVICETREE handling
linux-mainline: fix spacing with KERNEL_FEATURES:prepend
2025-07-16 13:59:46 +02:00 · 2025-04-05 23:04:32 +02:00 · 2025-03-31 12:31:50 +02:00 · 2025-03-31 12:31:50 +02:00 · 2025-03-31 12:21:15 +02:00 · 2025-03-30 00:56:00 +01:00
156 changed files with 6971 additions and 6855 deletions
--- a/conf/layer.conf
+++ b/conf/layer.conf
@ -14,4 +14,4 @@ LAYERVERSION_sunxi = "1"

 LAYERDEPENDS_sunxi = "core meta-python meta-arm"

-LAYERSERIES_COMPAT_sunxi = "honister kirkstone langdale mickledore nanbield"
+LAYERSERIES_COMPAT_sunxi = "styhead"
--- a/conf/machine/bananapi-m2-berry.conf
+++ b/conf/machine/bananapi-m2-berry.conf
@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: bananapi-m2-berry
+#@DESCRIPTION: Machine configuration for the Banana Pi M2 Berry, based on Allwinner V40 CPU
+
+require conf/machine/include/sun8i.inc
+require conf/machine/include/hardware/ap6212a.inc
+
+KERNEL_DEVICETREE = "allwinner/sun8i-v40-bananapi-m2-berry.dtb"
+UBOOT_MACHINE = "bananapi_m2_berry_defconfig"
--- a/conf/machine/bananapi-m2-zero.conf
+++ b/conf/machine/bananapi-m2-zero.conf
@ -5,6 +5,5 @@
 require conf/machine/include/sun8i.inc
 require conf/machine/include/hardware/ap6212a.inc

-KERNEL_DEVICETREE = "sun8i-h2-plus-bananapi-m2-zero.dtb"
+KERNEL_DEVICETREE = "allwinner/sun8i-h2-plus-bananapi-m2-zero.dtb"
 UBOOT_MACHINE = "bananapi_m2_zero_defconfig"
-
--- a/conf/machine/bananapi-m2m.conf
+++ b/conf/machine/bananapi-m2m.conf
@ -4,6 +4,5 @@

 require conf/machine/include/sun8i.inc

-KERNEL_DEVICETREE = "sun8i-r16-bananapi-m2m.dtb"
+KERNEL_DEVICETREE = "allwinner/sun8i-r16-bananapi-m2m.dtb"
 UBOOT_MACHINE = "Bananapi_m2m_defconfig"
-
--- a/conf/machine/bananapi-m2plus.conf
+++ b/conf/machine/bananapi-m2plus.conf
@ -4,6 +4,5 @@

 require conf/machine/include/sun8i.inc

-KERNEL_DEVICETREE = "sun8i-h3-bananapi-m2-plus.dtb"
+KERNEL_DEVICETREE = "allwinner/sun8i-h3-bananapi-m2-plus.dtb"
 UBOOT_MACHINE = "bananapi_m2_plus_h3_defconfig"
-
--- a/conf/machine/bananapi.conf
+++ b/conf/machine/bananapi.conf
@ -4,6 +4,6 @@

 require conf/machine/include/sun7i.inc

-KERNEL_DEVICETREE = "sun7i-a20-bananapi.dtb"
+KERNEL_DEVICETREE = "allwinner/sun7i-a20-bananapi.dtb"
 UBOOT_MACHINE = "Bananapi_config"
-SUNXI_FEX_FILE = "sys_config/a20/Bananapi.fex"
+SUNXI_FEX_FILE = "sys_config/a20/Bananapi.fex"
--- a/conf/machine/cubieboard.conf
+++ b/conf/machine/cubieboard.conf
@ -4,6 +4,6 @@

 require conf/machine/include/sun4i.inc

-KERNEL_DEVICETREE = "sun4i-a10-cubieboard.dtb"
+KERNEL_DEVICETREE = "allwinner/sun4i-a10-cubieboard.dtb"
 UBOOT_MACHINE = "Cubieboard_config"
 SUNXI_FEX_FILE = "sys_config/a10/cubieboard.fex"
--- a/conf/machine/cubieboard2.conf
+++ b/conf/machine/cubieboard2.conf
@ -4,6 +4,6 @@

 require conf/machine/include/sun7i.inc

-KERNEL_DEVICETREE = "sun7i-a20-cubieboard2.dtb"
+KERNEL_DEVICETREE = "allwinner/sun7i-a20-cubieboard2.dtb"
 UBOOT_MACHINE = "Cubieboard2_config"
 SUNXI_FEX_FILE = "sys_config/a20/cubieboard2.fex"
--- a/conf/machine/cubieboard4.conf
+++ b/conf/machine/cubieboard4.conf
@ -0,0 +1,11 @@
+#@TYPE: Machine
+#@NAME: CubieBoard4
+#@DESCRIPTION: Machine configuration for the cubieboard4, based on allwinner A80 CPU http://cubieboard.org/
+
+require conf/machine/include/sun9i.inc
+require conf/machine/include/hardware/ap6330.inc
+
+KERNEL_IMAGETYPE = "zImage"
+
+KERNEL_DEVICETREE = "allwinner/sun9i-a80-cubieboard4.dtb"
+UBOOT_MACHINE = "Cubieboard4_defconfig"
--- a/conf/machine/cubietruck.conf
+++ b/conf/machine/cubietruck.conf
@ -4,6 +4,6 @@

 require conf/machine/include/sun7i.inc

-KERNEL_DEVICETREE = "sun7i-a20-cubietruck.dtb"
+KERNEL_DEVICETREE = "allwinner/sun7i-a20-cubietruck.dtb"
 UBOOT_MACHINE = "Cubietruck_config"
-SUNXI_FEX_FILE = "sys_config/a20/cubietruck.fex"
+SUNXI_FEX_FILE = "sys_config/a20/cubietruck.fex"
--- a/conf/machine/include/hardware/ap6212a.inc
+++ b/conf/machine/include/hardware/ap6212a.inc
@ -1,5 +1,9 @@
 # Include for boards with AMPAK 6212A Wifi / Bluetooth module
 # https://linux-sunxi.org/Wifi#Ampak

-MACHINE_EXTRA_RRECOMMENDS:append = " kernel-module-brcmfmac"
-MACHINE_EXTRA_RDEPENDS:append = " linux-firmware-bcm43430"
+MACHINE_EXTRA_RRECOMMENDS:append = " kernel-module-brcmfmac kernel-module-hci-uart"
+MACHINE_EXTRA_RDEPENDS:append = " linux-firmware-bcm43430 armbian-firmware-ap6212"
+
+MACHINE_FEATURES:append = " bluetooth wifi"
+
+KERNEL_FEATURES:append = " features/ap6212/ap6212.scc"
--- a/conf/machine/include/hardware/ap6330.inc
+++ b/conf/machine/include/hardware/ap6330.inc
@ -0,0 +1,7 @@
+# Include for boards with AMPAK AP6330 Wifi / Bluetooth module
+# https://linux-sunxi.org/Wifi#Ampak
+
+MACHINE_EXTRA_RRECOMMENDS:append = " kernel-module-brcmfmac"
+MACHINE_EXTRA_RDEPENDS:append = " linux-firmware-bcm4330"
+
+MACHINE_FEATURES:append = " bluetooth wifi"
--- a/conf/machine/include/sun9i.inc
+++ b/conf/machine/include/sun9i.inc
@ -0,0 +1,5 @@
+require conf/machine/include/sunxi.inc
+require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/arm/armv7a/tune-cortexa15.inc
+
+SOC_FAMILY = "sun9i"
--- a/conf/machine/include/sunxi.inc
+++ b/conf/machine/include/sunxi.inc
@ -14,7 +14,7 @@ XSERVER = "xserver-xorg \
           xf86-input-keyboard"

 PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
-PREFERRED_VERSION_linux-mainline ?= "6.5.%"
+PREFERRED_VERSION_linux-mainline ?= "6.6.%"
 PREFERRED_PROVIDER_u-boot ?= "u-boot"
 PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"

@ -40,7 +40,7 @@ SUNXI_FEX_FILE ?= " "
 SUNXI_BOOT_SPACE ?= "40"
 IMAGE_BOOT_FILES ?= "${KERNEL_IMAGETYPE} boot.scr"
 # ship fex file for sunxi kernel, devicetree file for mainline kernel
-IMAGE_BOOT_FILES += "${@bb.utils.contains('PREFERRED_PROVIDER_virtual/kernel', 'linux-sunxi', '${SUNXI_FEX_FILE}', '${KERNEL_DEVICETREE}', d)}"
+IMAGE_BOOT_FILES += "${@bb.utils.contains('PREFERRED_PROVIDER_virtual/kernel', 'linux-sunxi', '${SUNXI_FEX_FILE}', d.getVar('KERNEL_DEVICETREE', '').split('/')[-1], d)}"
 WKS_FILES ?= "sunxi-sdcard-image.wks.in"
 WKS_FILE_DEPENDS ?= "virtual/kernel u-boot"
 # in case of sunxi kernel, sunxi-board-fex must be built prior wic image assembly
--- a/conf/machine/include/sunxi64.inc
+++ b/conf/machine/include/sunxi64.inc
@ -4,6 +4,7 @@ include conf/machine/include/soc-family.inc
 MACHINEOVERRIDES =. "sunxi:sunxi64:"

 PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
+PREFERRED_VERSION_linux-mainline ?= "6.6.%"
 PREFERRED_PROVIDER_u-boot ?= "u-boot"
 PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"

@ -16,7 +17,7 @@ MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"
 UBOOT_LOCALVERSION = "-g${@d.getVar('SRCPV', True).partition('+')[2][0:7]}"

 UBOOT_ENTRYPOINT ?= "0x40008000"
-UBOOT_LOADADDRESS ?= "0x400080OB00"
+UBOOT_LOADADDRESS ?= "0x40008000"

 #UBOOT_BINARY ?= "u-boot.itb"
 SPL_BINARY ?= "u-boot-sunxi-with-spl.bin"
@ -24,28 +25,8 @@ SPL_BINARY ?= "u-boot-sunxi-with-spl.bin"
 SERIAL_CONSOLES ?= "115200;ttyS0"
 MACHINE_FEATURES ?= "alsa apm keyboard rtc serial screen usbgadget usbhost vfat"

-# arm64 dbts are under <vendor>/dts but is deployed under DEPLOYDIR 
-do_fix_device_tree_location() {
-
-    for kdt in ${KERNEL_DEVICETREE}
-    do
-        local dbt_dir=$(dirname ${kdt})
-        if [ "." != "${dbt_dir}" ] ; then
-            local dbt=$(basename ${kdt})
-            local dst=${DEPLOY_DIR_IMAGE}/${dbt_dir}/${dbt}
-            if [ ! -f ${dst} ] ; then
-                mkdir -p ${DEPLOY_DIR_IMAGE}/$dbt_dir
-                ln -s ${DEPLOY_DIR_IMAGE}/${dbt} ${dst}
-            fi
-        fi
-    done
-}
-
-
-addtask do_fix_device_tree_location after do_write_wks_template before do_image_wic
-
 SUNXI_BOOT_SPACE ?= "40"
-IMAGE_BOOT_FILES ?= "${KERNEL_IMAGETYPE} boot.scr ${KERNEL_DEVICETREE}"
+IMAGE_BOOT_FILES ?= "${KERNEL_IMAGETYPE} boot.scr ${@d.getVar('KERNEL_DEVICETREE', '').split('/')[-1]}"

 WKS_FILES ?= "sunxi-sdcard-image.wks.in"
 WKS_FILE_DEPENDS ?= "virtual/kernel u-boot"
--- a/conf/machine/lamobo-r1.conf
+++ b/conf/machine/lamobo-r1.conf
@ -5,6 +5,6 @@
 require conf/machine/include/sun7i.inc

 MACHINE_EXTRA_RRECOMMENDS = " kernel-modules kernel-devicetree"
-KERNEL_DEVICETREE = "sun7i-a20-lamobo-r1.dtb"
+KERNEL_DEVICETREE = "allwinner/sun7i-a20-lamobo-r1.dtb"
 UBOOT_MACHINE = "Lamobo_R1_config"
 SUNXI_FEX_FILE = "sys_config/a20/lamobo-r1.fex"
--- a/conf/machine/licheepi-zero.conf
+++ b/conf/machine/licheepi-zero.conf
@ -6,4 +6,4 @@ require conf/machine/include/sun8i.inc


 UBOOT_MACHINE = "LicheePi_Zero_defconfig"
-KERNEL_DEVICETREE = "sun8i-v3s-licheepi-zero.dtb"
+KERNEL_DEVICETREE = "allwinner/sun8i-v3s-licheepi-zero.dtb"
--- a/conf/machine/mangopi-mq-t-t113.conf
+++ b/conf/machine/mangopi-mq-t-t113.conf
@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: MangoPi MQ-R T113-S3
+#@DESCRIPTION: Machine configuration for the MangoPi MQ-R, based on the Allwinner T113-S3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "allwinner/sun8i-t113s-mangopi-mq-r-t113.dtb"
+KERNEL_IMAGETYPE = "zImage"
+
+UBOOT_MACHINE = "mangopi_mq_r_defconfig"
--- a/conf/machine/marsboard-a10.conf
+++ b/conf/machine/marsboard-a10.conf
@ -5,6 +5,6 @@

 require conf/machine/include/sun4i.inc

-KERNEL_DEVICETREE = "sun4i-a10-marsboard.dtb"
+KERNEL_DEVICETREE = "allwinner/sun4i-a10-marsboard.dtb"
 UBOOT_MACHINE = "Marsboard_A10_config"
 SUNXI_FEX_FILE = "sys_config/a10/marsboard_a10.fex"
--- a/conf/machine/mele.conf
+++ b/conf/machine/mele.conf
@ -4,6 +4,6 @@

 require conf/machine/include/sun4i.inc

-KERNEL_DEVICETREE = "sun4i-a10-a1000.dtb"
+KERNEL_DEVICETREE = "allwinner/sun4i-a10-a1000.dtb"
 UBOOT_MACHINE = "Mele_A1000_config"
-SUNXI_FEX_FILE = "sys_config/a10/mele_a1000.fex"
+SUNXI_FEX_FILE = "sys_config/a10/mele_a1000.fex"
--- a/conf/machine/merrii-a80-optimus.conf
+++ b/conf/machine/merrii-a80-optimus.conf
@ -0,0 +1,11 @@
+#@TYPE: Machine
+#@NAME: Merrii A80 Optimus
+#@DESCRIPTION: Machine configuration for the Merrii A80 Optimus, based on Allwinner A80 CPU https://linux-sunxi.org/Merrii_A80_Optimus_Board
+
+require conf/machine/include/sun9i.inc
+require conf/machine/include/hardware/ap6330.inc
+
+KERNEL_IMAGETYPE = "zImage"
+
+KERNEL_DEVICETREE = "allwinner/sun9i-a80-optimus.dtb"
+UBOOT_MACHINE = "Merrii_A80_Optimus_defconfig"
--- a/conf/machine/nanopi-m1-plus.conf
+++ b/conf/machine/nanopi-m1-plus.conf
@ -4,6 +4,5 @@

 require conf/machine/include/sun8i.inc

-KERNEL_DEVICETREE = "sun8i-h3-nanopi-m1-plus.dtb"
+KERNEL_DEVICETREE = "allwinner/sun8i-h3-nanopi-m1-plus.dtb"
 UBOOT_MACHINE = "nanopi_m1_plus_defconfig"
-
--- a/conf/machine/nanopi-m1.conf
+++ b/conf/machine/nanopi-m1.conf
@ -4,5 +4,5 @@

 require conf/machine/include/sun8i.inc

-KERNEL_DEVICETREE = "sun8i-h3-nanopi-m1.dtb"
+KERNEL_DEVICETREE = "allwinner/sun8i-h3-nanopi-m1.dtb"
 UBOOT_MACHINE = "nanopi_m1_defconfig"
--- a/conf/machine/nanopi-neo-air.conf
+++ b/conf/machine/nanopi-neo-air.conf
@ -5,5 +5,5 @@

 require conf/machine/include/sun8i.inc

-KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo-air.dtb"
+KERNEL_DEVICETREE = "allwinner/sun8i-h3-nanopi-neo-air.dtb"
 UBOOT_MACHINE = "nanopi_neo_air_defconfig"
--- a/conf/machine/nanopi-neo.conf
+++ b/conf/machine/nanopi-neo.conf
@ -4,6 +4,5 @@

 require conf/machine/include/sun8i.inc

-KERNEL_DEVICETREE = "sun8i-h3-nanopi-neo.dtb"
+KERNEL_DEVICETREE = "allwinner/sun8i-h3-nanopi-neo.dtb"
 UBOOT_MACHINE = "nanopi_neo_defconfig"
-
--- a/conf/machine/nanopi-r1.conf
+++ b/conf/machine/nanopi-r1.conf
@ -4,5 +4,5 @@

 require conf/machine/include/sun8i.inc

-KERNEL_DEVICETREE = "sun8i-h3-nanopi-r1.dtb"
+KERNEL_DEVICETREE = "allwinner/sun8i-h3-nanopi-r1.dtb"
 UBOOT_MACHINE = "nanopi_r1_defconfig"
--- a/conf/machine/olinuxino-a10lime.conf
+++ b/conf/machine/olinuxino-a10lime.conf
@ -5,6 +5,6 @@

 require conf/machine/include/sun4i.inc

-KERNEL_DEVICETREE = "sun4i-a10-olinuxino-lime.dtb"
+KERNEL_DEVICETREE = "allwinner/sun4i-a10-olinuxino-lime.dtb"
 UBOOT_MACHINE = "A10-OLinuXino-Lime_config"
-SUNXI_FEX_FILE = "sys_config/a10/a10-olinuxino-lime.fex"
+SUNXI_FEX_FILE = "sys_config/a10/a10-olinuxino-lime.fex"
--- a/conf/machine/olinuxino-a10s.conf
+++ b/conf/machine/olinuxino-a10s.conf
@ -5,6 +5,6 @@

 require conf/machine/include/sun5i.inc

-KERNEL_DEVICETREE = "sun5i-a10s-olinuxino-micro.dtb"
+KERNEL_DEVICETREE = "allwinner/sun5i-a10s-olinuxino-micro.dtb"
 UBOOT_MACHINE = "A10s-OLinuXino-M_config"
-SUNXI_FEX_FILE = "sys_config/a10s/a10s-olinuxino-m.fex"
+SUNXI_FEX_FILE = "sys_config/a10s/a10s-olinuxino-m.fex"
--- a/conf/machine/olinuxino-a13.conf
+++ b/conf/machine/olinuxino-a13.conf
@ -5,6 +5,6 @@

 require conf/machine/include/sun5i.inc

-KERNEL_DEVICETREE = "sun5i-a13-olinuxino.dtb"
+KERNEL_DEVICETREE = "allwinner/sun5i-a13-olinuxino.dtb"
 UBOOT_MACHINE = "A13-OLinuXino_config"
-SUNXI_FEX_FILE = "sys_config/a13/a13-olinuxino.fex"
+SUNXI_FEX_FILE = "sys_config/a13/a13-olinuxino.fex"
--- a/conf/machine/olinuxino-a20.conf
+++ b/conf/machine/olinuxino-a20.conf
@ -5,6 +5,6 @@

 require conf/machine/include/sun7i.inc

-KERNEL_DEVICETREE = "sun7i-a20-olinuxino-micro.dtb"
+KERNEL_DEVICETREE = "allwinner/sun7i-a20-olinuxino-micro.dtb"
 UBOOT_MACHINE = "A20-OLinuXino_MICRO_config"
-SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_micro.fex"
+SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_micro.fex"
--- a/conf/machine/olinuxino-a20lime.conf
+++ b/conf/machine/olinuxino-a20lime.conf
@ -5,6 +5,6 @@

 require conf/machine/include/sun7i.inc

-KERNEL_DEVICETREE = "sun7i-a20-olinuxino-lime.dtb"
+KERNEL_DEVICETREE = "allwinner/sun7i-a20-olinuxino-lime.dtb"
 UBOOT_MACHINE = "A20-OLinuXino-Lime_config"
-SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_lime.fex"
+SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_lime.fex"
--- a/conf/machine/olinuxino-a20lime2-emmc.conf
+++ b/conf/machine/olinuxino-a20lime2-emmc.conf
@ -5,6 +5,6 @@

 require conf/machine/include/sun7i.inc

-KERNEL_DEVICETREE = "sun7i-a20-olinuxino-lime2-emmc.dtb"
+KERNEL_DEVICETREE = "allwinner/sun7i-a20-olinuxino-lime2-emmc.dtb"
 UBOOT_MACHINE = "A20-OLinuXino-Lime2-eMMC_config"
 SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_lime2.fex"
--- a/conf/machine/olinuxino-a20lime2.conf
+++ b/conf/machine/olinuxino-a20lime2.conf
@ -5,6 +5,6 @@

 require conf/machine/include/sun7i.inc

-KERNEL_DEVICETREE = "sun7i-a20-olinuxino-lime2.dtb"
+KERNEL_DEVICETREE = "allwinner/sun7i-a20-olinuxino-lime2.dtb"
 UBOOT_MACHINE = "A20-OLinuXino-Lime2_config"
 SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_lime2.fex"
--- a/conf/machine/olinuxino-a20som.conf
+++ b/conf/machine/olinuxino-a20som.conf
@ -5,6 +5,6 @@

 require conf/machine/include/sun7i.inc

-KERNEL_DEVICETREE = "sun7i-a20-olimex-som-evb.dtb"
+KERNEL_DEVICETREE = "allwinner/sun7i-a20-olimex-som-evb.dtb"
 UBOOT_MACHINE = "A20-Olimex-SOM-EVB_config"
 SUNXI_FEX_FILE = "sys_config/a20/olimex_a20_som.fex"
--- a/conf/machine/orange-pi-3lts.conf
+++ b/conf/machine/orange-pi-3lts.conf
@ -0,0 +1,28 @@
+#@TYPE: Machine
+#@NAME: orange-pi-3lts
+#@DESCRIPTION: Machine configuration for the Orange Pi 3 LTS , based on Allwinner H6 CPU
+# Note: Some boards have faulty RTC a fix is included by default
+# a workarround in the dts ins include by default but in can removed adding
+# KERNEL_FEATURES:remove = " bsp/orange-pi-3lts/fix-rtc.scc" to local.conf
+
+require conf/machine/include/sun50i-h6.inc
+
+KERNEL_DEVICETREE = "allwinner/sun50i-h6-orangepi-3-lts.dtb"
+UBOOT_MACHINE = "orangepi_3_lts_defconfig"
+
+SPL_BINARY = "u-boot-sunxi-with-spl.bin"
+
+# as for now neither graphics nor audio is supported
+MACHINE_FEATURES:remove = " x11 alsa rtc"
+MACHINE_FEATURES:append = " bluetooth wifi"
+
+# fiwrware needed for wifi + bt
+MACHINE_EXTRA_RRECOMMENDS += " uwe5622-firmware"
+
+# Load modules for wifi & bt
+# Note: fo wifi a custom hci attach userspace sofware is needed that is not included in the layer
+KERNEL_MODULE_AUTOLOAD += " sprdwl_ng sprdbt_tty "
+
+
+
+
--- a/conf/machine/orange-pi-lite.conf
+++ b/conf/machine/orange-pi-lite.conf
@ -4,6 +4,5 @@

 require conf/machine/include/sun8i.inc

-KERNEL_DEVICETREE = "sun8i-h3-orangepi-lite.dtb"
+KERNEL_DEVICETREE = "allwinner/sun8i-h3-orangepi-lite.dtb"
 UBOOT_MACHINE = "orangepi_lite_defconfig"
-
--- a/conf/machine/orange-pi-one.conf
+++ b/conf/machine/orange-pi-one.conf
@ -4,6 +4,5 @@

 require conf/machine/include/sun8i.inc

-KERNEL_DEVICETREE = "sun8i-h3-orangepi-one.dtb"
+KERNEL_DEVICETREE = "allwinner/sun8i-h3-orangepi-one.dtb"
 UBOOT_MACHINE = "orangepi_one_defconfig"
-
--- a/conf/machine/orange-pi-pc-plus.conf
+++ b/conf/machine/orange-pi-pc-plus.conf
@ -4,6 +4,5 @@

 require conf/machine/include/sun8i.inc

-KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc-plus.dtb"
+KERNEL_DEVICETREE = "allwinner/sun8i-h3-orangepi-pc-plus.dtb"
 UBOOT_MACHINE = "orangepi_pc_plus_defconfig"
-
--- a/conf/machine/orange-pi-pc.conf
+++ b/conf/machine/orange-pi-pc.conf
@ -4,6 +4,5 @@

 require conf/machine/include/sun8i.inc

-KERNEL_DEVICETREE = "sun8i-h3-orangepi-pc.dtb"
+KERNEL_DEVICETREE = "allwinner/sun8i-h3-orangepi-pc.dtb"
 UBOOT_MACHINE = "orangepi_pc_defconfig"
-
--- a/conf/machine/orange-pi-prime.conf
+++ b/conf/machine/orange-pi-prime.conf
@ -0,0 +1,11 @@
+#@TYPE: Machine
+#@NAME: orange-pi-prime
+#@DESCRIPTION: Machine configuration for the orange-pi-prime, base on Allwinner H5 CPU
+
+require conf/machine/include/sun50i.inc
+require conf/machine/include/hardware/ap6212a.inc
+
+KERNEL_DEVICETREE = "allwinner/sun50i-h5-orangepi-prime.dtb"
+UBOOT_MACHINE = "orangepi_prime_defconfig"
+
+MACHINE_EXTRA_RRECOMMENDS:append = " linux-firmware-rtl8723"
--- a/conf/machine/orange-pi-r1.conf
+++ b/conf/machine/orange-pi-r1.conf
@ -4,6 +4,5 @@

 require conf/machine/include/sun8i.inc

-KERNEL_DEVICETREE = "sun8i-h2-plus-orangepi-r1.dtb"
+KERNEL_DEVICETREE = "allwinner/sun8i-h2-plus-orangepi-r1.dtb"
 UBOOT_MACHINE = "orangepi_r1_defconfig"
-
--- a/conf/machine/orange-pi-zero-plus2-h3.conf
+++ b/conf/machine/orange-pi-zero-plus2-h3.conf
@ -5,5 +5,5 @@
 require conf/machine/include/sun8i.inc
 require conf/machine/include/hardware/ap6212a.inc

-KERNEL_DEVICETREE = "sun8i-h3-orangepi-zero-plus2.dtb"
+KERNEL_DEVICETREE = "allwinner/sun8i-h3-orangepi-zero-plus2.dtb"
 UBOOT_MACHINE = "orangepi_zero_plus2_h3_defconfig"
--- a/conf/machine/orange-pi-zero.conf
+++ b/conf/machine/orange-pi-zero.conf
@ -4,6 +4,5 @@

 require conf/machine/include/sun8i.inc

-KERNEL_DEVICETREE = "sun8i-h2-plus-orangepi-zero.dtb"
+KERNEL_DEVICETREE = "allwinner/sun8i-h2-plus-orangepi-zero.dtb"
 UBOOT_MACHINE = "orangepi_zero_defconfig"
-
--- a/conf/machine/orange-pi-zero2.conf
+++ b/conf/machine/orange-pi-zero2.conf
@ -13,4 +13,9 @@ SPL_BINARY = "u-boot-sunxi-with-spl.bin"
 MACHINE_FEATURES:remove = "alsa x11"
 MACHINE_FEATURES:append = "bluetooth wifi"

-MACHINE_EXTRA_RRECOMMENDS = "uwe5622-firmware"
+MACHINE_EXTRA_RRECOMMENDS = "uwe5622-firmware"
+
+# Load modules for wifi & bt
+# Note: fo wifi a custom hci attach userspace sofware is needed that is not included in the layer
+KERNEL_MODULE_AUTOLOAD += " sprdwl_ng sprdbt_tty "
+
--- a/conf/machine/pcduino.conf
+++ b/conf/machine/pcduino.conf
@ -4,6 +4,6 @@

 require conf/machine/include/sun4i.inc

-KERNEL_DEVICETREE = "sun4i-a10-pcduino.dtb"
+KERNEL_DEVICETREE = "allwinner/sun4i-a10-pcduino.dtb"
 UBOOT_MACHINE = "Linksprite_pcDuino_defconfig"
 SUNXI_FEX_FILE = "sys_config/a10/pcduino.fex"
--- a/conf/machine/pcduino3.conf
+++ b/conf/machine/pcduino3.conf
@ -4,6 +4,6 @@

 require conf/machine/include/sun7i.inc

-KERNEL_DEVICETREE = "sun7i-a20-pcduino3.dtb"
+KERNEL_DEVICETREE = "allwinner/sun7i-a20-pcduino3.dtb"
 UBOOT_MACHINE = "Linksprite_pcDuino3_defconfig"
-SUNXI_FEX_FILE = "sys_config/a20/linksprite_pcduino3.fex"
+SUNXI_FEX_FILE = "sys_config/a20/linksprite_pcduino3.fex"
--- a/recipes-bsp/trusted-firmware-a/trusted-firmware-a_%.bbappend
+++ b/recipes-bsp/trusted-firmware-a/trusted-firmware-a_%.bbappend
@ -1,7 +1,7 @@
-COMPATIBLE_MACHINE = "(sun50i|sun50i-h616|sun50i-h6)"
+COMPATIBLE_MACHINE:sunxi = "(sun50i|sun50i-h616|sun50i-h6)"

 TFA_PLATFORM:sun50i = "sun50i_a64"
 TFA_PLATFORM:sun50i-h6 = "sun50i_h6"
 TFA_PLATFORM:sun50i-h616 = "sun50i_h616"

-TFA_BUILD_TARGET = "bl31"
+TFA_BUILD_TARGET:sunxi = "bl31"
--- a/recipes-bsp/u-boot/files/0001-sunxi-board-Fix-early-PMIC-setup-conditions.patch
+++ b/recipes-bsp/u-boot/files/0001-sunxi-board-Fix-early-PMIC-setup-conditions.patch
@ -0,0 +1,41 @@
+From f4dde09fa41eb538b743ee2104c1e2e10cc7e13f Mon Sep 17 00:00:00 2001
+From: Leon Anavi <leon.anavi@konsulko.com>
+Date: Sat, 14 Dec 2024 10:59:09 +0000
+Subject: [PATCH] sunxi: board: Fix early PMIC setup conditions
+
+Patch provided by Andre Przywara through the U-Boot mailing list:
+https://lists.denx.de/pipermail/u-boot/2024-December/575050.html
+
+Upstream-Status: Pending
+
+Suggested-by: Andre Przywara <andre.przywara@arm.com>
+Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
+---
+ board/sunxi/board.c | 4 +++-
+ 1 file changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/board/sunxi/board.c b/board/sunxi/board.c
+index 961cdcde74..d6759fe853 100644
+--- a/board/sunxi/board.c
+++ b/board/sunxi/board.c
+@@ -577,7 +577,6 @@ void sunxi_board_init(void)
+ 
+ #ifdef CONFIG_AXP_DCDC1_VOLT
+ 	power_failed |= axp_set_dcdc1(CONFIG_AXP_DCDC1_VOLT);
+-	power_failed |= axp_set_dcdc5(CONFIG_AXP_DCDC5_VOLT);
+ #endif
+ #ifdef CONFIG_AXP_DCDC2_VOLT
+ 	power_failed |= axp_set_dcdc2(CONFIG_AXP_DCDC2_VOLT);
+@@ -586,6 +585,9 @@ void sunxi_board_init(void)
+ #ifdef CONFIG_AXP_DCDC4_VOLT
+ 	power_failed |= axp_set_dcdc4(CONFIG_AXP_DCDC4_VOLT);
+ #endif
+#ifdef CONFIG_AXP_DCDC5_VOLT
+	power_failed |= axp_set_dcdc5(CONFIG_AXP_DCDC5_VOLT);
+#endif
+ 
+ #ifdef CONFIG_AXP_ALDO1_VOLT
+ 	power_failed |= axp_set_aldo1(CONFIG_AXP_ALDO1_VOLT);
+-- 
+2.47.1
+
--- a/recipes-bsp/u-boot/files/0004-OrangePi-3-LTS-support.patch
+++ b/recipes-bsp/u-boot/files/0004-OrangePi-3-LTS-support.patch
@ -0,0 +1,421 @@
+From 9966dda20246285abf8b417bd251d5a4bea3e423 Mon Sep 17 00:00:00 2001
+From: Juliano Dorigão <jdorigao@gmail.com>
+Date: Fri, 3 Mar 2023 16:11:30 -0400
+Subject: [PATCH] OrangePi 3 LTS support
+
+Upstream-Status: Pending
+---
+ arch/arm/dts/Makefile                     |   1 +
+ arch/arm/dts/sun50i-h6-orangepi-3-lts.dts | 361 ++++++++++++++++++++++
+ configs/orangepi_3_lts_defconfig          |  19 ++
+ 3 files changed, 381 insertions(+)
+ create mode 100644 arch/arm/dts/sun50i-h6-orangepi-3-lts.dts
+ create mode 100644 configs/orangepi_3_lts_defconfig
+
+diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
+index 43951a77..8dbbb6f4 100644
+--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
+@@ -710,6 +710,7 @@ dtb-$(CONFIG_MACH_SUN50I_H5) += \
+ dtb-$(CONFIG_MACH_SUN50I_H6) += \
+ 	sun50i-h6-beelink-gs1.dtb \
+ 	sun50i-h6-orangepi-3.dtb \
+	sun50i-h6-orangepi-3-lts.dtb \
+ 	sun50i-h6-orangepi-lite2.dtb \
+ 	sun50i-h6-orangepi-one-plus.dtb \
+ 	sun50i-h6-pine-h64.dtb \
+diff --git a/arch/arm/dts/sun50i-h6-orangepi-3-lts.dts b/arch/arm/dts/sun50i-h6-orangepi-3-lts.dts
+new file mode 100644
+index 00000000..67f38b8a
+--- /dev/null
+++ b/arch/arm/dts/sun50i-h6-orangepi-3-lts.dts
+@@ -0,0 +1,361 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+// Copyright (C) 2023 Jernej Skrabec <jernej.skrabec@gmail.com>
+// Based on sun50i-h6-orangepi-3.dts, which is:
+// Copyright (C) 2019 Ondřej Jirman <megous@megous.com>
+
+/dts-v1/;
+
+#include "sun50i-h6.dtsi"
+#include "sun50i-h6-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "OrangePi 3 LTS";
+	compatible = "xunlong,orangepi-3-lts", "allwinner,sun50i-h6";
+
+	aliases {
+		ethernet0 = &emac;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ext_osc32k: ext_osc32k_clk {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "ext_osc32k";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "orangepi:red:power";
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
+		};
+
+		led-1 {
+			label = "orangepi:green:status";
+			gpios = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */
+			default-state = "on";
+		};
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC jack */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_gmac_3v3: gmac-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "gmac-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		startup-delay-us = <150000>;
+		enable-active-high;
+		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; /* PD6 */
+	};
+
+	reg_vcc33_wifi: vcc33-wifi {
+		/* Always on 3.3V regulator for WiFi and BT */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc33-wifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
+	};
+
+	reg_vcc_wifi_io: vcc-wifi-io {
+		/* Always on 1.8V/300mA regulator for WiFi and BT IO */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-wifi-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&reg_vcc33_wifi>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		clocks = <&rtc 1>;
+		clock-names = "ext_clock";
+		reset-gpios = <&r_pio 1 3 GPIO_ACTIVE_LOW>; /* PM3 */
+		post-power-on-delay-ms = <200>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
+&de {
+	status = "okay";
+};
+
+&dwc3 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ext_rgmii_pins>;
+	phy-mode = "rgmii";
+	phy-handle = <&ext_rgmii_phy>;
+	phy-supply = <&reg_gmac_3v3>;
+	allwinner,rx-delay-ps = <1500>;
+	allwinner,tx-delay-ps = <700>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
+&hdmi {
+	hvcc-supply = <&reg_bldo2>;
+	status = "okay";
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&mdio {
+	ext_rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+
+		reset-gpios = <&pio 3 14 GPIO_ACTIVE_LOW>; /* PD14 */
+		reset-assert-us = <15000>;
+		reset-deassert-us = <40000>;
+	};
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_cldo1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	bus-width = <4>;
+	status = "okay";
+};
+
+&mmc1 {
+	vmmc-supply = <&reg_vcc33_wifi>;
+	vqmmc-supply = <&reg_vcc_wifi_io>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_cldo1>;
+	vqmmc-supply = <&reg_bldo2>;
+	cap-mmc-hw-reset;
+	non-removable;
+	bus-width = <8>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pc-supply = <&reg_bldo2>;
+	vcc-pd-supply = <&reg_cldo1>;
+	vcc-pg-supply = <&reg_bldo3>;
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&r_rsb {
+	clock-frequency = <100000>;
+	status = "okay";
+
+	axp805: pmic@745 {
+		compatible = "x-powers,axp805", "x-powers,axp806";
+		reg = <0x745>;
+		interrupt-parent = <&r_intc>;
+		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc-pl-led-ir";
+			};
+
+			reg_aldo2: aldo2 {
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33-audio-tv-ephy-mac";
+			};
+
+			/* ALDO3 is shorted to CLDO1 */
+			reg_aldo3: aldo3 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-1";
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc18-dram-bias-pll";
+			};
+
+			reg_bldo2: bldo2 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-efuse-pcie-hdmi-pc";
+			};
+
+			reg_bldo3: bldo3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc-pm-pg-dcxoio-wifi";
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			reg_cldo1: cldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc33-io-pd-emmc-sd-usb-uart-2";
+			};
+
+			cldo2 {
+				/* unused */
+			};
+
+			cldo3 {
+				/* unused */
+			};
+
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1160000>;
+				regulator-ramp-delay = <2500>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-enable-ramp-delay = <32000>;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1080000>;
+				regulator-ramp-delay = <2500>;
+				regulator-name = "vdd-gpu";
+			};
+
+			reg_dcdcd: dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <980000>;
+				regulator-max-microvolt = <980000>;
+				regulator-name = "vdd-sys";
+			};
+
+			reg_dcdce: dcdce {
+				regulator-always-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-name = "vcc-dram";
+			};
+
+			sw {
+				/* unused */
+			};
+		};
+	};
+};
+
+&pwm {
+	status = "okay";
+};
+
+&r_ir {
+	status = "okay";
+};
+
+&rtc {
+	clocks = <&ext_osc32k>;
+};
+
+/delete-node/ &spi0;
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usb2otg {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usb2phy {
+	usb0_id_det-gpios = <&pio 2 15 GPIO_ACTIVE_HIGH>; /* PC15 */
+	usb0_vbus-supply = <&reg_vcc5v>;
+	usb3_vbus-supply = <&reg_vcc5v>;
+	status = "okay";
+};
+
+&usb3phy {
+	status = "okay";
+};
+diff --git a/configs/orangepi_3_lts_defconfig b/configs/orangepi_3_lts_defconfig
+new file mode 100644
+index 00000000..41a9af4e
+--- /dev/null
+++ b/configs/orangepi_3_lts_defconfig
+@@ -0,0 +1,19 @@
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_DEFAULT_DEVICE_TREE="sun50i-h6-orangepi-3-lts"
+CONFIG_SPL=y
+CONFIG_MACH_SUN50I_H6=y
+CONFIG_SUNXI_DRAM_H6_LPDDR3=y
+CONFIG_MMC0_CD_PIN="PF6"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL_STACK=0x118000
+CONFIG_SYS_PBSIZE=1024
+CONFIG_SYS_BOOTM_LEN=0x2000000
+CONFIG_PHY_SUN50I_USB3=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_DWC3=y
+# CONFIG_USB_DWC3_GADGET is not set
+-- 
+2.39.2
+
--- a/recipes-bsp/u-boot/files/0004-mangopi-mq-r-t113-Fix-serial-console.patch
+++ b/recipes-bsp/u-boot/files/0004-mangopi-mq-r-t113-Fix-serial-console.patch
@ -0,0 +1,30 @@
+From bf813915bf480154c707e0be14016cef94adbd95 Mon Sep 17 00:00:00 2001
+From: Marek Belisko <marek.belisko@gmail.com>
+Date: Tue, 7 May 2024 11:27:08 +0200
+Subject: [PATCH] mangopi-mq-r-t113: Fix serial console
+
+Serial console is on uart3 not on uart0.
+
+Upstream-Status: Inappropriate (for this board only)
+
+Signed-off-by: Marek Belisko <marek.belisko@gmail.com>
+---
+ include/configs/sunxi-common.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
+index b8ca77d031..4e4808d2c1 100644
+--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
+@@ -324,7 +324,7 @@
+ 	MEM_LAYOUT_ENV_EXTRA_SETTINGS \
+ 	DFU_ALT_INFO_RAM \
+ 	"fdtfile=" FDTFILE "\0" \
+-	"console=ttyS0,115200\0" \
+	"console=ttyS3,115200\0" \
+ 	"uuid_gpt_esp=" UUID_GPT_ESP "\0" \
+ 	"uuid_gpt_system=" UUID_GPT_SYSTEM "\0" \
+ 	"partitions=" PARTS_DEFAULT "\0" \
+-- 
+2.25.1
+
--- a/recipes-bsp/u-boot/u-boot_%.bbappend
+++ b/recipes-bsp/u-boot/u-boot_%.bbappend
@ -3,7 +3,7 @@ FILESEXTRAPATHS:prepend:sunxi := "${THISDIR}/files:"
 DEPENDS:append:sunxi = " bc-native dtc-native swig-native python3-native flex-native bison-native "
 DEPENDS:append:sun50i = " trusted-firmware-a"

-COMPATIBLE_MACHINE:sunxi = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
+COMPATIBLE_MACHINE:sunxi = "(sun4i|sun5i|sun7i|sun8i|sun9i|sun50i)"

 DEFAULT_PREFERENCE:sun4i = "1"
 DEFAULT_PREFERENCE:sun5i = "1"
@ -12,11 +12,19 @@ DEFAULT_PREFERENCE:sun8i = "1"
 DEFAULT_PREFERENCE:sun50i = "1"

 SRC_URI:append:sunxi = " \
-        file://0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch \
-	file://0002-Added-nanopi-r1-board-support.patch \
-	file://0003-sunxi-H6-Enable-Ethernet-on-Orange-Pi-One-Plus.patch \
-        file://boot.cmd \
+    file://0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch \
+    file://0002-Added-nanopi-r1-board-support.patch \
+    file://0003-sunxi-H6-Enable-Ethernet-on-Orange-Pi-One-Plus.patch \
+    file://0004-OrangePi-3-LTS-support.patch \
+    file://boot.cmd \
 "
+SRC_URI:append:sun9i = " \
+    file://0001-sunxi-board-Fix-early-PMIC-setup-conditions.patch \
+"
+
+SRC_URI:append:mangopi-mq-t-t113 = " \
+    file://0004-mangopi-mq-r-t113-Fix-serial-console.patch \
+    "

 UBOOT_ENV_SUFFIX:sunxi = "scr"
 UBOOT_ENV:sunxi = "boot"
@ -27,5 +35,5 @@ EXTRA_OEMAKE:append:sun50i = " BL31=${DEPLOY_DIR_IMAGE}/bl31.bin SCP=/dev/null"
 do_compile:sun50i[depends] += "trusted-firmware-a:do_deploy"

 do_compile:append:sunxi() {
-    ${B}/tools/mkimage -C none -A arm -T script -d ${WORKDIR}/boot.cmd ${WORKDIR}/${UBOOT_ENV_BINARY}
+    ${B}/tools/mkimage -C none -A arm -T script -d ${UNPACKDIR}/boot.cmd ${UNPACKDIR}/${UBOOT_ENV_BINARY}
 }
--- a/recipes-devtools/python/files/olinuxino-a20lime2-emmc
+++ b/recipes-devtools/python/files/olinuxino-a20lime2-emmc
@ -0,0 +1 @@
+/home/marek/data/projects/kas/sources/meta-sunxi/recipes-devtools/python/files/olinuxino-a20lime2
--- a/recipes-devtools/python/pya20_0.2.12.bb
+++ b/recipes-devtools/python/pya20_0.2.12.bb
@ -13,10 +13,10 @@ SRC_URI = "https://pypi.python.org/packages/source/p/pyA20/pyA20-${PV}.tar.gz \
          "
 S = "${WORKDIR}/pyA20-${PV}"

-inherit distutils3
+inherit setuptools3

 do_compile:prepend() { 
-cp ${WORKDIR}/mapping.h ${S}/pyA20/gpio/mapping.h
+    cp ${UNPACKDIR}/mapping.h ${S}/pyA20/gpio/mapping.h
 }

 SRC_URI[md5sum] = "cab03b4931199804603d1074f6d8f48f"
--- a/recipes-graphics/mesa/mesa-gl_%.bbappend
+++ b/recipes-graphics/mesa/mesa-gl_%.bbappend
--- a/recipes-graphics/mesa/mesa_%.bbappend
+++ b/recipes-graphics/mesa/mesa_%.bbappend
--- a/recipes-graphics/xorg-xserver/xf86-video-fbturbo_git.bb
+++ b/recipes-graphics/xorg-xserver/xf86-video-fbturbo_git.bb
@ -20,7 +20,7 @@ CFLAGS += " -I${STAGING_INCDIR}/xorg "

 do_install:append() {
    install -d ${D}${datadir}/X11/xorg.conf.d
-    install -m 0644 ${WORKDIR}/20-fbturbo.conf ${D}${datadir}/X11/xorg.conf.d
+    install -m 0644 ${UNPACKDIR}/20-fbturbo.conf ${D}${datadir}/X11/xorg.conf.d
 }

 FILES:${PN} += "${datadir}/X11/xorg.conf.d/20-fbturbo.conf"
--- a/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend
+++ b/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend
@ -1 +1 @@
-DEPENDS += "libxshmfence"
+PACKAGECONFIG[dri3] = "-Ddri3=true,-Ddri3=false,libxshmfence"
--- a/recipes-kernel/armbian-firmware/armbian-firmware_git.bb
+++ b/recipes-kernel/armbian-firmware/armbian-firmware_git.bb
@ -0,0 +1,37 @@
+SUMMARY = "Armbian Firmware"
+DESCRIPTION = "Collection of firmware files necessary for Armbian supported hardware devices to work correctly with the Linux kernel"
+LICENSE = "CLOSED"
+
+PV = "1.0+git"
+SRC_URI = "git://github.com/armbian/firmware.git;protocol=https;branch=master"
+SRCREV = "4050e02da2dce2b74c97101f7964ecfb962f5aec"
+
+S = "${WORKDIR}/git"
+
+inherit allarch
+
+do_compile[noexec] = "1"
+
+do_install() {
+    # ap6212 (bluetooth firmware only, wifi firmware is provided by linux-firmware-bcm43430)
+    install -d "${D}${nonarch_base_libdir}/firmware/ap6212"
+    install -m 0644 "${S}/ap6212/bcm43438a1.hcd" "${D}${nonarch_base_libdir}/firmware/ap6212/"
+    install -d "${D}${nonarch_base_libdir}/firmware/brcm"
+    ln -sf ../ap6212/bcm43438a1.hcd "${D}${nonarch_base_libdir}/firmware/brcm/BCM43430A1.hcd"
+}
+
+PACKAGES =+ " \
+    ${PN}-ap6212 \
+"
+
+FILES:${PN}-ap6212 = " \
+    ${nonarch_base_libdir}/firmware/ap6212/* \
+    ${nonarch_base_libdir}/firmware/brcm/BCM43430A1.hcd \
+"
+
+
+# Make armbian-firmware depend on all of the split-out packages.
+python populate_packages:prepend () {
+    firmware_pkgs = oe.utils.packages_filter_out_system(d)
+    d.appendVar('RRECOMMENDS:armbian-firmware', ' ' + ' '.join(firmware_pkgs))
+}
--- a/recipes-kernel/linux-firmware/linux-firmware_%.bbappend
+++ b/recipes-kernel/linux-firmware/linux-firmware_%.bbappend
@ -6,8 +6,21 @@
 # WARNING: The following commit is required for NVRAM files to be included in
 # linux-firmware-bcm43430 package:
 # http://git.openembedded.org/openembedded-core/commit/?id=dde0f79f32fa6bab045ef60199903f74c4cc3393
-do_install:append() {
+do_install:append:sunxi() {
 	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2.txt
 	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2-h3.txt
 	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt
+	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.sinovoip,bpi-m2-berry.txt
+}
+
+do_install:append:cubieboard4() {
+	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac4330-sdio.bin ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac4330-sdio.cubietech,a80-cubieboard4.bin
+}
+
+do_install:append:merrii-a80-optimus() {
+	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac4330-sdio.bin ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac4330-sdio.merrii,a80-optimus.bin
+}
+
+do_install:append:sun9i() {
+	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac4330-sdio.Prowise-PT301.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac4330-sdio.txt
 }
--- a/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0003-drv-fix-incldue-path-for-unisocwcn.patch
+++ b/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0003-drv-fix-incldue-path-for-unisocwcn.patch
@ -1,45 +0,0 @@
-From 5138d597275fd503573fac84018186bd18740644 Mon Sep 17 00:00:00 2001
-From: pbiel <pbiel7@gmail.com>
-Date: Thu, 30 Mar 2023 22:45:33 +0200
-Subject: [PATCH] Fix incldue path for unisocwcn
-
---
- drivers/net/wireless/uwe5622/Makefile           | 4 +++-
- drivers/net/wireless/uwe5622/unisocwcn/Makefile | 6 +++---
- 2 files changed, 6 insertions(+), 4 deletions(-)
-
-diff --git a/drivers/net/wireless/uwe5622/Makefile b/drivers/net/wireless/uwe5622/Makefile
-index 313ea5123..e9a398584 100644
--- a/drivers/net/wireless/uwe5622/Makefile
-+++ b/drivers/net/wireless/uwe5622/Makefile
-@@ -2,7 +2,9 @@ obj-$(CONFIG_AW_WIFI_DEVICE_UWE5622) += unisocwcn/
- obj-$(CONFIG_WLAN_UWE5622)    += unisocwifi/
- obj-$(CONFIG_TTY_OVERY_SDIO)  += tty-sdio/
- 
-UNISOCWCN_DIR := $(shell cd $(src)/unisocwcn/ && /bin/pwd)
-+mkfile_path := $(abspath $(lastword $(MAKEFILE_LIST)))
-+UNISOCWCN_DIR := $(dir $(mkfile_path))/unisocwcn/
-+
- UNISOC_BSP_INCLUDE := $(UNISOCWCN_DIR)/include
- export UNISOC_BSP_INCLUDE
- 
-diff --git a/drivers/net/wireless/uwe5622/unisocwcn/Makefile b/drivers/net/wireless/uwe5622/unisocwcn/Makefile
-index f9c595747..1ad490594 100644
--- a/drivers/net/wireless/uwe5622/unisocwcn/Makefile
-+++ b/drivers/net/wireless/uwe5622/unisocwcn/Makefile
-@@ -129,9 +129,9 @@ ccflags-y += -DCONFIG_WCN_BOOT
- ccflags-y += -DCONFIG_WCN_UTILS
- 
- #### include path ######
-ccflags-y += -I$(src)/include/
-ccflags-y += -I$(src)/platform/
-ccflags-y += -I$(src)/platform/rf/
-+ccflags-y += -I$(srctree)/$(src)/include/
-+ccflags-y += -I$(srctree)/$(src)/platform/
-+ccflags-y += -I$(srctree)/$(src)/platform/rf/
- 
- #### add cflag for Customer ######
- ### ---------- Hisilicon start ---------- ###
-- 
-2.34.1
-
--- a/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0004-drv-wireless-adapt-uwe5622-wifi-driver-to-kernel-6.1.patch
+++ b/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0004-drv-wireless-adapt-uwe5622-wifi-driver-to-kernel-6.1.patch
@ -1,177 +0,0 @@
-From 5f4d2d5fc32dfe41c73cac36ec6747c34e5562a3 Mon Sep 17 00:00:00 2001
-From: pbiel <pbiel7@gmail.com>
-Date: Wed, 15 Mar 2023 23:04:27 +0100
-Subject: [PATCH] wireless: Adapt uwe5622 wifi driver to kernel 6.1
-
---
- drivers/net/wireless/uwe5622/tty-sdio/lpm.c            |  2 +-
- .../uwe5622/unisocwcn/boot/wcn_integrate_dev.c         |  2 +-
- .../uwe5622/unisocwcn/platform/wcn_parn_parser.c       |  2 +-
- .../wireless/uwe5622/unisocwcn/platform/wcn_procfs.c   |  2 +-
- .../wireless/uwe5622/unisocwcn/usb/wcn_usb_download.c  |  2 +-
- .../net/wireless/uwe5622/unisocwcn/usb/wcn_usb_test.c  |  6 +++---
- drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c     | 10 +++++-----
- drivers/net/wireless/uwe5622/unisocwifi/cmdevt.c       |  2 +-
- 8 files changed, 14 insertions(+), 14 deletions(-)
-
-diff --git a/drivers/net/wireless/uwe5622/tty-sdio/lpm.c b/drivers/net/wireless/uwe5622/tty-sdio/lpm.c
-index b2d9a8994e5e..35e30651a921 100644
--- a/drivers/net/wireless/uwe5622/tty-sdio/lpm.c
-+++ b/drivers/net/wireless/uwe5622/tty-sdio/lpm.c
-@@ -70,7 +70,7 @@ static int btwrite_proc_show(struct seq_file *m, void *v)
- 
- static int bluesleep_open_proc_btwrite(struct inode *inode, struct file *file)
- {
-	return single_open(file, btwrite_proc_show, PDE_DATA(inode));
-+	return single_open(file, btwrite_proc_show, pde_data(inode));
- }
- 
- static const struct proc_ops lpm_proc_btwrite_fops = {
-diff --git a/drivers/net/wireless/uwe5622/unisocwcn/boot/wcn_integrate_dev.c b/drivers/net/wireless/uwe5622/unisocwcn/boot/wcn_integrate_dev.c
-index 3ee6910e7cf7..29a3ec298bc1 100644
--- a/drivers/net/wireless/uwe5622/unisocwcn/boot/wcn_integrate_dev.c
-+++ b/drivers/net/wireless/uwe5622/unisocwcn/boot/wcn_integrate_dev.c
-@@ -562,7 +562,7 @@ static struct wcn_proc_data g_proc_data = {
- static int wcn_platform_open(struct inode *inode, struct file *filp)
- {
- 	struct platform_proc_file_entry
-	*entry = (struct platform_proc_file_entry *)PDE_DATA(inode);
-+	*entry = (struct platform_proc_file_entry *)pde_data(inode);
- 
- 	WCN_INFO("entry name:%s\n!", entry->name);
- 
-diff --git a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c
-index aea7d6d0fe57..bd841f0b32d3 100644
--- a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c
-+++ b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c
-@@ -146,7 +146,7 @@ static int prefixcmp(const char *str, const char *prefix)
- }
- 
- #if KERNEL_VERSION(3, 19, 0) <= LINUX_VERSION_CODE
-static int find_callback(struct dir_context *ctx, const char *name, int namlen,
-+static bool find_callback(struct dir_context *ctx, const char *name, int namlen,
- 		     loff_t offset, u64 ino, unsigned int d_type)
- #else
- static int find_callback(void *ctx, const char *name, int namlen,
-diff --git a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_procfs.c b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_procfs.c
-index 2edb7903d80e..9e453365bba8 100644
--- a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_procfs.c
-+++ b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_procfs.c
-@@ -431,7 +431,7 @@ static const struct proc_ops mdbg_snap_shoot_seq_fops = {
- static int mdbg_proc_open(struct inode *inode, struct file *filp)
- {
- 	struct mdbg_proc_entry *entry =
-		(struct mdbg_proc_entry *)PDE_DATA(inode);
-+		(struct mdbg_proc_entry *)pde_data(inode);
- 	filp->private_data = entry;
- 
- 	return 0;
-diff --git a/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_download.c b/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_download.c
-index 8f228d403909..750bfc0466cb 100644
--- a/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_download.c
-+++ b/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_download.c
-@@ -82,7 +82,7 @@ static int wcn_usb_dopen(struct inode *inode, struct file *file)
- {
- 	struct wcn_usb_ddata *data;
- 
-	data = (struct wcn_usb_ddata *)PDE_DATA(inode);
-+	data = (struct wcn_usb_ddata *)pde_data(inode);
- 
- 	if (!data)
- 		return -EIO;
-diff --git a/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_test.c b/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_test.c
-index c2cccc658c0d..e7a9f258943e 100644
--- a/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_test.c
-+++ b/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_test.c
-@@ -61,7 +61,7 @@ static int wcn_usb_channel_open(struct inode *inode, struct file *file)
- {
- 	struct channel *channel;
- 
-	channel = (struct channel *)PDE_DATA(inode);
-+	channel = (struct channel *)pde_data(inode);
- 
- 	if (!channel)
- 		return -EIO;
-@@ -467,7 +467,7 @@ static int wcn_usb_chnmg_open(struct inode *inode, struct file *file)
- {
- 	struct chnmg *chnmg;
- 	/* get channel_list head */
-	chnmg = (struct chnmg *)PDE_DATA(inode);
-+	chnmg = (struct chnmg *)pde_data(inode);
- 
- 	file->private_data = chnmg;
- 	return 0;
-@@ -916,7 +916,7 @@ static int print_level_open(struct inode *inode, struct file *file)
- {
- 	struct chnmg *chnmg;
- 	/* get channel_list head */
-	chnmg = (struct chnmg *)PDE_DATA(inode);
-+	chnmg = (struct chnmg *)pde_data(inode);
- 
- 	file->private_data = chnmg;
- 	return 0;
-diff --git a/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c b/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c
-index daef880ae3c0..2231388da70a 100644
--- a/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c
-+++ b/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c
-@@ -703,7 +703,7 @@ static int sprdwl_add_cipher_key(struct sprdwl_vif *vif, bool pairwise,
- }
- 
- static int sprdwl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
-				   u8 key_index, bool pairwise,
-+				   int link_id, u8 key_index, bool pairwise,
- 				   const u8 *mac_addr,
- 				   struct key_params *params)
- {
-@@ -725,7 +725,7 @@ static int sprdwl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
- }
- 
- static int sprdwl_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
-				   u8 key_index, bool pairwise,
-+				   int link_id, u8 key_index, bool pairwise,
- 				   const u8 *mac_addr)
- {
- 	struct sprdwl_vif *vif = netdev_priv(ndev);
-@@ -755,7 +755,7 @@ static int sprdwl_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
- 
- static int sprdwl_cfg80211_set_default_key(struct wiphy *wiphy,
- 					   struct net_device *ndev,
-					   u8 key_index, bool unicast,
-+					   int link_id, u8 key_index, bool unicast,
- 					   bool multicast)
- {
- 	struct sprdwl_vif *vif = netdev_priv(ndev);
-@@ -984,7 +984,7 @@ static int sprdwl_cfg80211_change_beacon(struct wiphy *wiphy,
- 	return sprdwl_change_beacon(vif, beacon);
- }
- 
-static int sprdwl_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev)
-+static int sprdwl_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev, unsigned int link_id)
- {
- #ifdef DFS_MASTER
- 	struct sprdwl_vif *vif = netdev_priv(ndev);
-@@ -2367,7 +2367,7 @@ void sprdwl_report_connection(struct sprdwl_vif *vif,
- 		 conn_info->status == SPRDWL_ROAM_SUCCESS){
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 14, 0)
- 		struct cfg80211_roam_info roam_info = {
-			.bss = bss,
-+			.links[0].bss = bss,
- 			.req_ie = conn_info->req_ie,
- 			.req_ie_len = conn_info->req_ie_len,
- 			.resp_ie = conn_info->resp_ie,
-diff --git a/drivers/net/wireless/uwe5622/unisocwifi/cmdevt.c b/drivers/net/wireless/uwe5622/unisocwifi/cmdevt.c
-index e81619b12e39..1ecbfac5b490 100644
--- a/drivers/net/wireless/uwe5622/unisocwifi/cmdevt.c
-+++ b/drivers/net/wireless/uwe5622/unisocwifi/cmdevt.c
-@@ -3296,7 +3296,7 @@ void sprdwl_event_chan_changed(struct sprdwl_vif *vif, u8 *data, u16 len)
- 						NL80211_CHAN_HT20);
- 		else
- 			wl_err("%s, ch is null!\n", __func__);
-		cfg80211_ch_switch_notify(vif->ndev, &chandef);
-+		cfg80211_ch_switch_notify(vif->ndev, &chandef, 0);
- 	}
- }
- 
-- 
-2.34.1
-
--- a/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0006-drv-add-dump_reg-and-sunxi-sysinfo-drivers.patch
+++ b/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0006-drv-add-dump_reg-and-sunxi-sysinfo-drivers.patch
--- a/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0009-dts-add-addr_mgt-device-tree-node.patch
+++ b/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0009-dts-add-addr_mgt-device-tree-node.patch
@ -1,32 +0,0 @@
-From 706dc6ed092e4a1b9d84893cb4186fbd354bb1c8 Mon Sep 17 00:00:00 2001
-From: pbiel <pbiel7@gmail.com>
-Date: Thu, 26 Jan 2023 09:51:22 +0100
-Subject: [PATCH] Add addr_mgt device tree node
-
---
- arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-index d0b95d43a..15f45a3f9 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-@@ -591,5 +591,15 @@ sunxi-info {
- 			compatible = "allwinner,sun50i-h616-sys-info";
- 			status = "okay";
- 		};
-+
-+		addr_mgt {
-+			compatible = "allwinner,sunxi-addr_mgt";
-+			type_addr_wifi = <0x00>;
-+			type_addr_bt = <0x00>;
-+			type_addr_eth = <0x00>;
-+			status = "okay";
-+			linux,phandle = <0x179>;
-+			phandle = <0x179>;
-+		};
- 	};
- };
-- 
-2.34.1
-
--- a/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0011-dts-add-usb-to-h616.patch
+++ b/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0011-dts-add-usb-to-h616.patch
@ -1,184 +0,0 @@
-From ab35c98369d50766eb20920a93a2dca927935481 Mon Sep 17 00:00:00 2001
-From: OpenEmbedded <oe.patch@oe>
-Date: Fri, 19 May 2023 23:01:14 +0200
-Subject: [PATCH] Add usb support to h616. This is not needed from kernel 6.2
-
-Signed-off-by: OpenEmbedded <oe.patch@oe>
---
- .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 160 ++++++++++++++++++
- 1 file changed, 160 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-index 04cdec7e2..a1d872e74 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-@@ -504,6 +504,166 @@ mdio0: mdio {
- 			};
- 		};
- 
-+		usbotg: usb@5100000 {
-+			compatible = "allwinner,sun50i-h616-musb",
-+				     "allwinner,sun8i-h3-musb";
-+			reg = <0x05100000 0x0400>;
-+			clocks = <&ccu CLK_BUS_OTG>;
-+			resets = <&ccu RST_BUS_OTG>;
-+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-+			interrupt-names = "mc";
-+			phys = <&usbphy 0>;
-+			phy-names = "usb";
-+			extcon = <&usbphy 0>;
-+			status = "disabled";
-+		};
-+
-+		usbphy: phy@5100400 {
-+			compatible = "allwinner,sun50i-h616-usb-phy";
-+			reg = <0x05100400 0x24>,
-+			      <0x05101800 0x14>,
-+			      <0x05200800 0x14>,
-+			      <0x05310800 0x14>,
-+			      <0x05311800 0x14>;
-+			reg-names = "phy_ctrl",
-+				    "pmu0",
-+				    "pmu1",
-+				    "pmu2",
-+				    "pmu3";
-+			clocks = <&ccu CLK_USB_PHY0>,
-+				 <&ccu CLK_USB_PHY1>,
-+				 <&ccu CLK_USB_PHY2>,
-+				 <&ccu CLK_USB_PHY3>,
-+				 <&ccu CLK_BUS_EHCI2>;
-+			clock-names = "usb0_phy",
-+				      "usb1_phy",
-+				      "usb2_phy",
-+				      "usb3_phy",
-+				      "pmu2_clk";
-+			resets = <&ccu RST_USB_PHY0>,
-+				 <&ccu RST_USB_PHY1>,
-+				 <&ccu RST_USB_PHY2>,
-+				 <&ccu RST_USB_PHY3>;
-+			reset-names = "usb0_reset",
-+				      "usb1_reset",
-+				      "usb2_reset",
-+				      "usb3_reset";
-+			status = "disabled";
-+			#phy-cells = <1>;
-+		};
-+
-+		ehci0: usb@5101000 {
-+			compatible = "allwinner,sun50i-h616-ehci",
-+				     "generic-ehci";
-+			reg = <0x05101000 0x100>;
-+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ccu CLK_BUS_OHCI0>,
-+				 <&ccu CLK_BUS_EHCI0>,
-+				 <&ccu CLK_USB_OHCI0>;
-+			resets = <&ccu RST_BUS_OHCI0>,
-+				 <&ccu RST_BUS_EHCI0>;
-+			phys = <&usbphy 0>;
-+			phy-names = "usb";
-+			status = "disabled";
-+		};
-+
-+		ohci0: usb@5101400 {
-+			compatible = "allwinner,sun50i-h616-ohci",
-+				     "generic-ohci";
-+			reg = <0x05101400 0x100>;
-+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ccu CLK_BUS_OHCI0>,
-+				 <&ccu CLK_USB_OHCI0>;
-+			resets = <&ccu RST_BUS_OHCI0>;
-+			phys = <&usbphy 0>;
-+			phy-names = "usb";
-+			status = "disabled";
-+		};
-+
-+		ehci1: usb@5200000 {
-+			compatible = "allwinner,sun50i-h616-ehci",
-+				     "generic-ehci";
-+			reg = <0x05200000 0x100>;
-+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ccu CLK_BUS_OHCI1>,
-+				 <&ccu CLK_BUS_EHCI1>,
-+				 <&ccu CLK_USB_OHCI1>;
-+			resets = <&ccu RST_BUS_OHCI1>,
-+				 <&ccu RST_BUS_EHCI1>;
-+			phys = <&usbphy 1>;
-+			phy-names = "usb";
-+			status = "disabled";
-+		};
-+
-+		ohci1: usb@5200400 {
-+			compatible = "allwinner,sun50i-h616-ohci",
-+				     "generic-ohci";
-+			reg = <0x05200400 0x100>;
-+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ccu CLK_BUS_OHCI1>,
-+				 <&ccu CLK_USB_OHCI1>;
-+			resets = <&ccu RST_BUS_OHCI1>;
-+			phys = <&usbphy 1>;
-+			phy-names = "usb";
-+			status = "disabled";
-+		};
-+
-+		ehci2: usb@5310000 {
-+			compatible = "allwinner,sun50i-h616-ehci",
-+				     "generic-ehci";
-+			reg = <0x05310000 0x100>;
-+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ccu CLK_BUS_OHCI2>,
-+				 <&ccu CLK_BUS_EHCI2>,
-+				 <&ccu CLK_USB_OHCI2>;
-+			resets = <&ccu RST_BUS_OHCI2>,
-+				 <&ccu RST_BUS_EHCI2>;
-+			phys = <&usbphy 2>;
-+			phy-names = "usb";
-+			status = "disabled";
-+		};
-+
-+		ohci2: usb@5310400 {
-+			compatible = "allwinner,sun50i-h616-ohci",
-+				     "generic-ohci";
-+			reg = <0x05310400 0x100>;
-+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ccu CLK_BUS_OHCI2>,
-+				 <&ccu CLK_USB_OHCI2>;
-+			resets = <&ccu RST_BUS_OHCI2>;
-+			phys = <&usbphy 2>;
-+			phy-names = "usb";
-+			status = "disabled";
-+		};
-+
-+		ehci3: usb@5311000 {
-+			compatible = "allwinner,sun50i-h616-ehci",
-+				     "generic-ehci";
-+			reg = <0x05311000 0x100>;
-+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ccu CLK_BUS_OHCI3>,
-+				 <&ccu CLK_BUS_EHCI3>,
-+				 <&ccu CLK_USB_OHCI3>;
-+			resets = <&ccu RST_BUS_OHCI3>,
-+				 <&ccu RST_BUS_EHCI3>;
-+			phys = <&usbphy 3>;
-+			phy-names = "usb";
-+			status = "disabled";
-+		};
-+
-+		ohci3: usb@5311400 {
-+			compatible = "allwinner,sun50i-h616-ohci",
-+				     "generic-ohci";
-+			reg = <0x05311400 0x100>;
-+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ccu CLK_BUS_OHCI3>,
-+				 <&ccu CLK_USB_OHCI3>;
-+			resets = <&ccu RST_BUS_OHCI3>;
-+			phys = <&usbphy 3>;
-+			phy-names = "usb";
-+			status = "disabled";
-+		};
-+
- 		rtc: rtc@7000000 {
- 			compatible = "allwinner,sun50i-h616-rtc";
- 			reg = <0x07000000 0x400>;
-- 
-2.40.1
-
--- a/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0012-dts-orange-pi-zero2.patch
+++ b/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0012-dts-orange-pi-zero2.patch
@ -1,84 +0,0 @@
-From 038441bbe0f6dab3e701061c514a8d776dbe6523 Mon Sep 17 00:00:00 2001
-From: OpenEmbedded <oe.patch@oe>
-Date: Sat, 20 May 2023 14:07:47 +0200
-Subject: [PATCH] DTS orange pi zero2 enable usb
-
-Signed-off-by: OpenEmbedded <oe.patch@oe>
---
- .../allwinner/sun50i-h616-orangepi-zero2.dts  | 42 +++++++++++++++++++
- 1 file changed, 42 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-index 88234a139..3b836296b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-@@ -50,6 +50,16 @@ reg_vcc5v: vcc5v {
- 		regulator-always-on;
- 	};
- 
-+        reg_usb1_vbus: regulator-usb1-vbus {
-+                compatible = "regulator-fixed";
-+                regulator-name = "usb1-vbus";
-+                regulator-min-microvolt = <5000000>;
-+                regulator-max-microvolt = <5000000>;
-+                vin-supply = <&reg_vcc5v>;
-+                enable-active-high;
-+                gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
-+        };
-+
- 	reg_vcc33_wifi: vcc33-wifi {
- 		/* Always on 3.3V regulator for WiFi and BT */
- 		compatible = "regulator-fixed";
-@@ -79,6 +89,12 @@ wifi_pwrseq: wifi-pwrseq {
- 	};
- };
- 
-+&ehci1 {
-+        status = "okay";
-+};
-+
-+/* USB 2 & 3 are on headers only. */
-+
- &mmc1 {
- 	vmmc-supply = <&reg_vcc33_wifi>;
- 	vqmmc-supply = <&reg_vcc_wifi_io>;
-@@ -123,6 +139,11 @@ &mmc0 {
- 	status = "okay";
- };
- 
-+
-+&ohci1 {
-+	status = "okay";
-+};
-+
- &r_rsb {
- 	status = "okay";
- 
-@@ -258,3 +279,24 @@ &uart0 {
- 	pinctrl-0 = <&uart0_ph_pins>;
- 	status = "okay";
- };
-+
-+&usbotg {
-+	/*
-+	 * PHY0 pins are connected to a USB-C socket, but a role switch
-+	 * is not implemented: both CC pins are pulled to GND.
-+	 * The VBUS pins power the device, so a fixed peripheral mode
-+	 * is the best choice.
-+	 * The board can be powered via GPIOs, in this case port0 *can*
-+	 * act as a host (with a cable/adapter ignoring CC), as VBUS is
-+	 * then provided by the GPIOs. Any user of this setup would
-+	 * need to adjust the DT accordingly: dr_mode set to "host",
-+	 * enabling OHCI0 and EHCI0.
-+	 */
-+	dr_mode = "peripheral";
-+	status = "okay";
-+};
-+
-+&usbphy {
-+	usb1_vbus-supply = <&reg_usb1_vbus>;
-+	status = "okay";
-+};
-- 
-2.40.1
-
--- a/recipes-kernel/linux/linux-mainline.inc
+++ b/recipes-kernel/linux/linux-mainline.inc
@ -1,29 +1,13 @@
 SECTION = "kernel"
 LICENSE = "GPL-2.0-only"
 LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
-COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun9i|sun50i)"

 inherit kernel

 require linux.inc

-KERNEL_DTB_PREFIX = "0"
-
-python() {
-    # return version in int form
-    def kernel_version():
-        ver = d.getVar('PV', True).split('.')
-        return int("".join(ver[0])),int("".join(ver[1]))
-
-    # kernel 6.5 have updated dts path add 'allwinner' prefix automatically
-    major, minor = kernel_version()
-    if major >= 6 and minor >= 5:
-        dt = d.getVar('KERNEL_DEVICETREE', True)
-        if not "allwinner" in dt:
-            dt = "allwinner/{0}".format(dt)
-            d.setVar('KERNEL_DEVICETREE', dt)
-        d.setVar('KERNEL_DTB_PREFIX', "1")
-}
+LINUX_VERSION = "${PV}"

 # Since we're not using git, this doesn't make a difference, but we need to fill
 # in something or kernel-yocto.bbclass will fail.
@ -42,30 +26,30 @@ S = "${WORKDIR}/linux-${PV}"
 KRELEASE = "${@d.getVar('PV', True).split('.')[0]}"

 SRC_URI = "https://www.kernel.org/pub/linux/kernel/v${KRELEASE}.x/linux-${PV}.tar.xz \
-	file://defconfig \
+	   file://defconfig \
+	   file://sunxi-kmeta;type=kmeta;name=sunxi-kmeta;destsuffix=sunxi-kmeta \
 "

-# append patches for kernels before 6.5 and after based on version
-SRC_URI += "${@oe.utils.ifelse(d.getVar('KERNEL_DTB_PREFIX') == '1', d.getVar('SOURCES_K65'), d.getVar('SOURCES'))}"
-
-SOURCES_K65 = " \
-	file://6.5/0001-dts-orangepi-zero-Add-wifi-support.patch \
-	file://6.5/0002-dts-nanopi-neo-air-Add-camera-support.patch \
-	file://6.5/0003-dts-allwinner-bananapi-m2-zero-Enforce-consistent-MM.patch \
-	file://6.5/0004-dts-allwinner-bananapi-m64-Consistent-nodes-for-mmc-devices.patch \
-"
-
-SOURCES = " \
-	file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
-	file://0002-dts-nanopi-neo-air-add-camera.patch \
-	file://0003-dts-allwinner-bananapi-m2-zreo-Enforce-consistent-MM.patch \
-	file://0004-dts-allwinner-bananapi-m64-Consistent-nodes-for-mmc-devices.patch \
+# patches
+SRC_URI:append = " \
+	file://patches/0001-dts-orangepi-zero-Add-wifi-support.patch \
+	file://patches/0002-dts-nanopi-neo-air-Add-camera-support.patch \
+	file://patches/0003-dts-allwinner-bananapi-m2-zero-Enforce-consistent-MM.patch \
+	file://patches/0004-dts-allwinner-bananapi-m64-Consistent-nodes-for-mmc-devices.patch \
+	file://patches/0005-ARM-dts-sunxi-Add-MMC-alias-for-consistent-enumerati.patch \
+	file://patches/0006-dts-allwinner-orangepi-zero-mmc-aliases-for-consiste.patch \
 "

 SRC_URI:append:use-mailine-graphics = " file://drm.cfg"
 SRC_URI:append:bananapi = " file://axp20x.cfg"
+SRC_URI:append:bananapi-m2-berry = " file://axp20x.cfg"
 SRC_URI:append:bananapi-m2-zero = " file://axp20x.cfg"
 SRC_URI:append:cubietruck = " file://axp20x.cfg"
 SRC_URI:append:nanopi-neo-air = " file://cam500b.cfg"
+SRC_URI:append:orange-pi-prime = " \
+	file://0001-dts-sun50i-h5-enable-power-button-for-orange-pi-prime.patch \
+	file://0002-dts-sun50i-h5-orange-pi-prime-add-regulator.patch \
+	file://0003-dts-sun50i-h5-orange-pi-prime-add-rtl8723cs.patch \
+"

 FILES_${KERNEL_PACKAGE_NAME}-base:append = " ${nonarch_base_libdir}/modules/${KERNEL_VERSION}/modules.builtin.modinfo"
--- a/recipes-kernel/linux/linux-mainline/0001-dts-orange-pi-zero-Add-wifi-support.patch
+++ b/recipes-kernel/linux/linux-mainline/0001-dts-orange-pi-zero-Add-wifi-support.patch
@ -1,87 +0,0 @@
-diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
-index 84cd9c061..917986cce 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
-+++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
-@@ -80,13 +80,15 @@
- 		};
- 	};
- 
-	reg_vcc_wifi: reg_vcc_wifi {
-+	vdd_wifi: vdd_wifi {
- 		compatible = "regulator-fixed";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-name = "vcc-wifi";
-		enable-active-high;
-+		regulator-name = "wifi";
-+		regulator-min-microvolt = <1800000>;
-+		regulator-max-microvolt = <1800000>;
- 		gpio = <&pio 0 20 GPIO_ACTIVE_HIGH>;
-+		startup-delay-us = <70000>;
-+		enable-active-high;
-+
- 	};
- 
- 	reg_vdd_cpux: vdd-cpux-regulator {
-@@ -106,10 +108,12 @@
- 			  1300000 1>;
- 	};
- 
-	wifi_pwrseq: wifi_pwrseq {
-+	pwrseq_wifi: pwrseq_wifi {
- 		compatible = "mmc-pwrseq-simple";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&wifi_rst>;
- 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>;
-		post-power-on-delay-ms = <200>;
-+		post-power-on-delay-ms = <50>;
- 	};
- };
- 
-@@ -140,9 +144,11 @@
- };
- 
- &mmc1 {
-	vmmc-supply = <&reg_vcc_wifi>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	vqmmc-supply = <&vdd_wifi>;
-+	mmc-pwrseq = <&pwrseq_wifi>;
- 	bus-width = <4>;
-+	max-frequency = <16000000>;
- 	non-removable;
- 	status = "okay";
- 
-@@ -152,6 +158,13 @@
- 	 */
- 	xr819: sdio_wifi@1 {
- 		reg = <1>;
-+		compatible = "xradio,xr819";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&wifi_wake>;
-+		interrupt-parent = <&pio>;
-+		interrupts = <6 10 IRQ_TYPE_EDGE_RISING>;
-+		interrupt-names = "host-wake";
-+		local-mac-address = [dc 44 6d c0 ff ee];
- 	};
- };
- 
-@@ -208,3 +221,18 @@
- 	status = "okay";
- 	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
- };
-+
-+&pio {
-+	wifi_wake: wifi_wake {
-+		pins = "PG10";
-+		function = "gpio_in";
-+    };
-+};
-+
-+&r_pio {
-+	wifi_rst: wifi_rst {
-+		pins = "PL7";
-+		function = "gpio_out";
-+    };
-+};
-+
--- a/recipes-kernel/linux/linux-mainline/0002-dts-nanopi-neo-air-add-camera.patch
+++ b/recipes-kernel/linux/linux-mainline/0002-dts-nanopi-neo-air-add-camera.patch
@ -1,101 +0,0 @@
-diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
-index cd3df12b65..33a161692f 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
-+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
-@@ -77,6 +77,39 @@
- 		compatible = "mmc-pwrseq-simple";
- 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
- 	};
-+
-+        cam_xclk: cam-xclk {
-+                #clock-cells = <0>;
-+                compatible = "fixed-clock";
-+                clock-frequency = <24000000>;
-+                clock-output-names = "cam-xclk";
-+        };
-+
-+        reg_cam_avdd: cam-avdd {
-+                compatible = "regulator-fixed";
-+                regulator-name = "cam-avdd";
-+                regulator-min-microvolt = <2800000>;
-+                regulator-max-microvolt = <2800000>;
-+                vin-supply = <&reg_vcc3v3>;
-+        };
-+
-+        reg_cam_dovdd: cam-dovdd {
-+                compatible = "regulator-fixed";
-+                regulator-name = "cam-dovdd";
-+                regulator-min-microvolt = <1800000>;
-+                regulator-max-microvolt = <1800000>;
-+                vin-supply = <&reg_vcc3v3>;
-+        };
-+
-+        reg_cam_dvdd: cam-dvdd {
-+                compatible = "regulator-fixed";
-+                regulator-name = "cam-dvdd";
-+                regulator-min-microvolt = <1500000>;
-+                regulator-max-microvolt = <1500000>;
-+                vin-supply = <&reg_vcc3v3>;
-+        };
-+
-+
- };
- 
- &mmc0 {
-@@ -141,3 +174,55 @@
- 	/* USB VBUS is always on */
- 	status = "okay";
- };
-+
-+&csi {
-+    status = "okay";
-+
-+    port {
-+        #address-cells = <1>;
-+        #size-cells = <0>;
-+
-+        /* Parallel bus endpoint */
-+        csi_from_ov5640: endpoint {
-+            remote-endpoint = <&ov5640_to_csi>;
-+            bus-width = <8>;
-+            data-shift = <2>;
-+            hsync-active = <1>; /* Active high */
-+            vsync-active = <0>; /* Active low */
-+            data-active = <1>;  /* Active high */
-+            pclk-sample = <1>;  /* Rising */
-+        };
-+    };
-+};
-+
-+&i2c2 {
-+   status = "okay";
-+
-+   ov5640: camera@3c {
-+        compatible = "ovti,ov5640";
-+        reg = <0x3c>;
-+        clocks = <&cam_xclk>;
-+        clock-names = "xclk";
-+
-+        reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>;
-+        powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>;
-+        AVDD-supply = <&reg_cam_avdd>;
-+        DOVDD-supply = <&reg_cam_dovdd>;
-+        DVDD-supply = <&reg_cam_dvdd>;
-+
-+        port {
-+            ov5640_to_csi: endpoint {
-+                remote-endpoint = <&csi_from_ov5640>;
-+                bus-width = <8>;
-+                data-shift = <2>;
-+                hsync-active = <1>; /* Active high */
-+                vsync-active = <0>; /* Active low */
-+                data-active = <1>;  /* Active high */
-+                pclk-sample = <1>;  /* Rising */
-+            };
-+        };
-+    };
-+};
-+&i2c2_pins {
-+   bias-pull-up;
-+};
-
--- a/recipes-kernel/linux/linux-mainline/0003-dts-allwinner-bananapi-m2-zreo-Enforce-consistent-MM.patch
+++ b/recipes-kernel/linux/linux-mainline/0003-dts-allwinner-bananapi-m2-zreo-Enforce-consistent-MM.patch
@ -1,28 +0,0 @@
-From 9b4baa9b5aab0511c46a1ae95485e1a3ea984352 Mon Sep 17 00:00:00 2001
-From: matteolel <matteolel91@hotmail.it>
-Date: Fri, 9 Dec 2022 16:38:11 +0000
-Subject: [PATCH] dts: allwinner: bananapi-m2-zreo: Enforce consistent MMC
- numbering
-
-Enforce MMC number (sometimes the order was wrong and the device does not boot).
---
- arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 3 +++
- 1 file changed, 3 insertions(+)
-
-diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
-index 8e8634ff2..37a2ed937 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
-+++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
-@@ -20,6 +20,9 @@ / {
- 	aliases {
- 		serial0 = &uart0;
- 		serial1 = &uart1;
-+		mmc0 = &mmc0;
-+		mmc1 = &mmc1;
-+		mmc2 = &mmc2;
- 	};
- 
- 	chosen {
-- 
-2.25.1
-
--- a/recipes-kernel/linux/linux-mainline/0004-dts-allwinner-bananapi-m64-Consistent-nodes-for-mmc-devices.patch
+++ b/recipes-kernel/linux/linux-mainline/0004-dts-allwinner-bananapi-m64-Consistent-nodes-for-mmc-devices.patch
@ -1,27 +0,0 @@
-From f487f62babb11d014da7a0b58a0fcdf6d217a812 Mon Sep 17 00:00:00 2001
-From: Marek Belisko <marek.belisko@open-nandra.com>
-Date: Thu, 11 May 2023 11:18:33 +0200
-Subject: [PATCH] bananapi-m64: Consistent nodes for mmc devices
-
-Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
---
- arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts | 3 +++
- 1 file changed, 3 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
-index e6d5bc0f7..39a28aad8 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
-@@ -16,6 +16,9 @@ aliases {
- 		ethernet0 = &emac;
- 		serial0 = &uart0;
- 		serial1 = &uart1;
-+                mmc0 = &mmc0;
-+                mmc1 = &mmc1;
-+                mmc2 = &mmc2;
- 	};
- 
- 	chosen {
-- 
-2.25.1
-
--- a/recipes-kernel/linux/linux-mainline/orange-pi-prime/0001-dts-sun50i-h5-enable-power-button-for-orange-pi-prime.patch
+++ b/recipes-kernel/linux/linux-mainline/orange-pi-prime/0001-dts-sun50i-h5-enable-power-button-for-orange-pi-prime.patch
@ -0,0 +1,27 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Gunjan Gupta <viraniac@gmail.com>
+Date: Sat, 15 Jul 2023 17:06:17 +0000
+Subject: arm64: dts: sun50i: h5: enable power button for orangepi prime
+
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts | 3 ++-
+ 1 file changed, 2 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
+index f430acd8558f..35e09098570f 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
+@@ -63,8 +63,9 @@ gpio-keys {
+ 
+ 		key-sw4 {
+ 			label = "sw4";
+-			linux,code = <BTN_0>;
+			linux,code = <KEY_POWER>;
+ 			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+ 		};
+ 	};
+ 
+-- 
+Armbian
+
--- a/recipes-kernel/linux/linux-mainline/orange-pi-prime/0002-dts-sun50i-h5-orange-pi-prime-add-regulator.patch
+++ b/recipes-kernel/linux/linux-mainline/orange-pi-prime/0002-dts-sun50i-h5-orange-pi-prime-add-regulator.patch
@ -0,0 +1,66 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: The-going <48602507+The-going@users.noreply.github.com>
+Date: Mon, 24 Jan 2022 19:34:31 +0300
+Subject: arm64:dts: sun50i-h5-orangepi-prime add regulator
+
+---
+ .../allwinner/sun50i-h5-orangepi-prime.dts    | 30 +++++++++++++++++++
+ 1 file changed, 30 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
+index 998396bc0..6dc6850c1 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
+@@ -8,6 +8,7 @@
+ 
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/sun4i-a10.h>
+ 
+ / {
+ 	model = "Xunlong Orange Pi Prime";
+@@ -93,6 +94,10 @@ wifi_pwrseq: wifi_pwrseq {
+ 	};
+ };
+ 
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
+ &codec {
+ 	allwinner,audio-routing =
+ 		"Line Out", "LINEOUT",
+@@ -188,6 +193,31 @@ &ohci3 {
+ 	status = "okay";
+ };
+ 
+&r_i2c {
+	status = "okay";
+
+	reg_vdd_cpux: regulator@65 {
+		compatible = "silergy,sy8106a";
+		reg = <0x65>;
+		regulator-name = "vdd-cpux";
+		silergy,fixed-microvolt = <1200000>;
+		/*
+		 * The datasheet uses 1.1V as the minimum value of VDD-CPUX,
+		 * however both the Armbian DVFS table and the official one
+		 * have operating points with voltage under 1.1V, and both
+		 * DVFS table are known to work properly at the lowest
+		 * operating point.
+		 *
+		 * Use 1.0V as the minimum voltage instead.
+		 */
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1400000>;
+		regulator-ramp-delay = <200>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
+ &uart0 {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&uart0_pa_pins>;
+-- 
+2.25.1
--- a/recipes-kernel/linux/linux-mainline/orange-pi-prime/0003-dts-sun50i-h5-orange-pi-prime-add-rtl8723cs.patch
+++ b/recipes-kernel/linux/linux-mainline/orange-pi-prime/0003-dts-sun50i-h5-orange-pi-prime-add-rtl8723cs.patch
@ -0,0 +1,35 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: The-going <48602507+The-going@users.noreply.github.com>
+Date: Mon, 7 Feb 2022 19:11:07 +0300
+Subject: arm64:dts: sun50i-h5-orangepi-prime add rtl8723cs
+
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
+index 8b92d5e77220..f430acd8558f 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
+@@ -25,6 +25,7 @@ reg_vcc3v3: vcc3v3 {
+ 	aliases {
+ 		ethernet0 = &emac;
+ 		serial0 = &uart0;
+		ethernet1 = &rtl8723cs;
+ 	};
+ 
+ 	chosen {
+@@ -174,6 +175,10 @@ &mmc1 {
+ 	bus-width = <4>;
+ 	non-removable;
+ 	status = "okay";
+
+	rtl8723cs: sdio_wifi@1 {
+		reg = <1>;
+	};
+ };
+ 
+ &ohci0 {
+-- 
+Armbian
+
--- a/recipes-kernel/linux/linux-mainline/patches/0001-dts-orangepi-zero-Add-wifi-support.patch
+++ b/recipes-kernel/linux/linux-mainline/patches/0001-dts-orangepi-zero-Add-wifi-support.patch
@ -3,6 +3,8 @@ From: Marek Belisko <marek.belisko@open-nandra.com>
 Date: Tue, 24 Oct 2023 10:40:52 +0200
 Subject: [PATCH] dts: orangepi-zero: Add wifi support

+Upstream-Status: Pending
+
 Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
 ---
 .../allwinner/sun8i-h2-plus-orangepi-zero.dts | 46 +++++++++++++++----
--- a/recipes-kernel/linux/linux-mainline/patches/0002-dts-nanopi-neo-air-Add-camera-support.patch
+++ b/recipes-kernel/linux/linux-mainline/patches/0002-dts-nanopi-neo-air-Add-camera-support.patch
@ -3,6 +3,8 @@ From: Marek Belisko <marek.belisko@open-nandra.com>
 Date: Tue, 24 Oct 2023 10:42:36 +0200
 Subject: [PATCH] dts:nanopi-neo-air: Add camera support

+Upstream-Status: Pending
+
 Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
 ---
 .../dts/allwinner/sun8i-h3-nanopi-neo-air.dts | 85 +++++++++++++++++++
--- a/recipes-kernel/linux/linux-mainline/patches/0003-dts-allwinner-bananapi-m2-zero-Enforce-consistent-MM.patch
+++ b/recipes-kernel/linux/linux-mainline/patches/0003-dts-allwinner-bananapi-m2-zero-Enforce-consistent-MM.patch
@ -6,6 +6,8 @@ Subject: [PATCH] dts: allwinner: bananapi-m2-zero: Enforce consistent MMC

 Enforce MMC number (sometimes the order was wrong and the device does not boot).

+Upstream-Status: Pending
+
 Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
 ---
 arch/arm/boot/dts/allwinner/sun8i-h2-plus-bananapi-m2-zero.dts | 3 +++
--- a/recipes-kernel/linux/linux-mainline/patches/0004-dts-allwinner-bananapi-m64-Consistent-nodes-for-mmc-devices.patch
+++ b/recipes-kernel/linux/linux-mainline/patches/0004-dts-allwinner-bananapi-m64-Consistent-nodes-for-mmc-devices.patch
@ -3,6 +3,8 @@ From: Marek Belisko <marek.belisko@open-nandra.com>
 Date: Thu, 11 May 2023 11:18:33 +0200
 Subject: [PATCH] bananapi-m64: Consistent nodes for mmc devices

+Upstream-Status: Pending
+
 Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
 ---
 arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts | 3 +++
--- a/recipes-kernel/linux/linux-mainline/patches/0005-ARM-dts-sunxi-Add-MMC-alias-for-consistent-enumerati.patch
+++ b/recipes-kernel/linux/linux-mainline/patches/0005-ARM-dts-sunxi-Add-MMC-alias-for-consistent-enumerati.patch
@ -0,0 +1,31 @@
+From 8b245b30a451bc4a4081759a6918b630ec075a7c Mon Sep 17 00:00:00 2001
+From: Stefan Gloor <code@stefan-gloor.ch>
+Date: Thu, 19 Dec 2024 10:34:54 +0100
+Subject: [PATCH] ARM: dts: sunxi: Add MMC alias for consistent enumeration
+
+Add explicit alias for MMC devices, so that (e)MMC and micro SD cards
+are enumerated consistenly. This should fix spurious boot failures when
+specifying a hard-coded root partition, e.g., mmcblk0p2.
+
+Signed-off-by: Stefan Gloor <code@stefan-gloor.ch>
+Upstream-Status: Denied https://lore.kernel.org/lkml/CAGb2v67dBhL3-AhLeHg3xOgbNZ3qu0aj9+kA+MoOMRYfr_Z_zQ@mail.gmail.com/
+---
+ arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro.dts | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro.dts
+index a1b89b2a2999..9cd1eb690134 100644
+--- a/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro.dts
+++ b/arch/arm/boot/dts/allwinner/sun7i-a20-olinuxino-micro.dts
+@@ -60,6 +60,8 @@ aliases {
+ 		serial2 = &uart7;
+ 		spi0 = &spi1;
+ 		spi1 = &spi2;
+		mmc0 = &mmc0;
+		mmc1 = &mmc3;
+ 	};
+ 
+ 	chosen {
+-- 
+2.45.2
+
--- a/recipes-kernel/linux/linux-mainline/patches/0006-dts-allwinner-orangepi-zero-mmc-aliases-for-consiste.patch
+++ b/recipes-kernel/linux/linux-mainline/patches/0006-dts-allwinner-orangepi-zero-mmc-aliases-for-consiste.patch
@ -0,0 +1,32 @@
+From a2d765aab2989ba080b8f63cb0489d6a531cb3fd Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Oliver=20K=C3=A4stner?= <git@oliver-kaestner.de>
+Date: Sun, 16 Mar 2025 22:36:53 +0100
+Subject: [PATCH] dts: allwinner: orangepi-zero: mmc aliases for consistent
+ enumeration
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This fixes random boot failures.
+
+Upstream-Status: Inappropriate [https://github.com/linux-sunxi/meta-sunxi/pull/431]
+
+Signed-off-by: Oliver Kästner <git@oliver-kaestner.de>
+---
+ arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
+index ca94e313f..570a88327 100644
+--- a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
+@@ -59,6 +59,9 @@ aliases {
+ 		/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
+ 		ethernet0 = &emac;
+ 		ethernet1 = &xr819;
+		mmc0 = &mmc0; /* microSD */
+		mmc1 = &mmc1; /* XR819 WiFi */
+		mmc2 = &mmc2;
+ 	};
+ 
+ 	chosen {
--- a/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/defconfig
+++ b/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/defconfig
--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/add-nodes-for-sunxi-info-addr-dump-reg.patch
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/add-nodes-for-sunxi-info-addr-dump-reg.patch
@ -0,0 +1,72 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: The-going <48602507+The-going@users.noreply.github.com>
+Date: Sat, 16 Apr 2022 11:51:35 +0300
+Subject: add nodes for sunxi-info, sunxi-addr and sunxi-dump-reg
+
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 19 ++++++++++
+ 1 file changed, 19 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+index 538c90663602..6365cce07304 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi
+@@ -1243,6 +1243,25 @@ ths: thermal-sensor@5070400 {
+ 			nvmem-cell-names = "calibration";
+ 			#thermal-sensor-cells = <1>;
+ 		};
+
+		sunxi-info {
+			compatible = "allwinner,sun50i-h6-sys-info";
+			status = "okay";
+		};
+
+		addr_mgt: addr-mgt {
+			compatible = "allwinner,sunxi-addr_mgt";
+			type_addr_wifi = <0x2>;
+			type_addr_bt = <0x2>;
+			type_addr_eth = <0x2>;
+			status = "okay";
+		};
+
+		dump_reg: dump_reg@20000 {
+			compatible = "allwinner,sunxi-dump-reg";
+			reg = <0x0 0x03001000 0x0 0x0f20>;
+			status = "okay";
+		};
+ 	};
+ 
+ 	thermal-zones {
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+index 98735d39e6e8..5ff1b357a25b 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+@@ -1053,6 +1053,25 @@ ths: thermal-sensor@5070400 {
+ 			nvmem-cell-names = "calibration";
+ 			#thermal-sensor-cells = <1>;
+ 		};
+
+		dump_reg: dump_reg@20000 {
+			compatible = "allwinner,sunxi-dump-reg";
+			reg = <0x0 0x03001000 0x0 0x0f20>;
+			status = "okay";
+		};
+
+		sunxi-info {
+			compatible = "allwinner,sun50i-h616-sys-info";
+			status = "okay";
+		};
+
+		addr_mgt: addr-mgt {
+			compatible = "allwinner,sunxi-addr_mgt";
+			type_addr_wifi = <0x2>;
+			type_addr_bt = <0x2>;
+			type_addr_eth = <0x2>;
+			status = "okay";
+		};
+ 	};
+ 
+ 	thermal-zones {
+-- 
+Armbian
+
--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-h616-Add-device-node-for-SID.patch
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-h616-Add-device-node-for-SID.patch
@ -0,0 +1,41 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Kali Prasad <kprasadvnsi@protonmail.com>
+Date: Sun, 19 Sep 2021 08:02:27 +0000
+Subject: arm64: dts: allwinner: h616: Add device node for SID
+
+The device tree binding for H616's SID controller.
+
+Signed-off-by: Kali Prasad <kprasadvnsi@protonmail.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 15 ++++++++++
+ 1 file changed, 15 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+index 45359b0d317a..7ad1982fb47f 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+@@ -171,6 +171,21 @@ ccu: clock@3001000 {
+ 			#reset-cells = <1>;
+ 		};
+ 
+		sid: efuse@3006000 {
+			compatible = "allwinner,sun50i-h616-sid";
+			reg = <0x03006000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			cpu_speed_grade: cpu-speed-grade@0 {
+				reg = <0x00 0x02>;
+			};
+
+			ths_calibration: thermal-sensor-calibration@14 {
+				reg = <0x14 0x8>;
+			};
+		};
+
+ 		watchdog: watchdog@30090a0 {
+ 			compatible = "allwinner,sun50i-h616-wdt",
+ 				     "allwinner,sun6i-a31-wdt";
+-- 
+Armbian
+
--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-h616-Add-efuse_xlate-cpu-frequency-scaling-v1_6_2.patch
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-h616-Add-efuse_xlate-cpu-frequency-scaling-v1_6_2.patch
@ -0,0 +1,473 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: AGM1968 <AGM1968@users.noreply.github.com>
+Date: Tue, 23 May 2023 16:43:00 +0000
+Subject: arm64-dts-allwinner-h616-Add-efuse_xlate-cpu-frequency-scaling-v1_6_2
+ arch/arm64/boot/dts/allwinner/sun50i-h616-cpu-opp.dtsi
+ arch/arm64/boot/dts/allwinner/sun50i-h618-cpu-dvfs.dtsi
+ arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+ drivers/cpufreq/cpufreq-dt-platdev.c drivers/cpufreq/sun50i-cpufreq-nvmem.c
+
+Signed-off-by: AGM1968 <AGM1968@users.noreply.github.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h616-cpu-opp.dtsi       | 75 ++++++++
+ arch/arm64/boot/dts/allwinner/sun50i-h618-cpu-dvfs.dtsi      | 64 +++++++++++++
+ arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi |  1 +
+ arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts |  5 +
+ arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts | 62 ++-----------
+ drivers/cpufreq/cpufreq-dt-platdev.c                         |  2 +
+ drivers/cpufreq/sun50i-cpufreq-nvmem.c                       | 92 +++++++---
+ 7 files changed, 221 insertions(+), 80 deletions(-)
+ create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-h618-cpu-dvfs.dtsi
+ 
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-cpu-opp.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-cpu-opp.dtsi
+new file mode 100644
+index 000000000000..36f2950367c6
+--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-cpu-opp.dtsi
+@@ -0,0 +1,75 @@
+//SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+//Testing Version 1  from: AGM1968 <AGM1968@users.noreply.github.com>
+//Noted: PLL_CPUX = 24 MHz*N/P (WIP)
+
+/ {
+	cpu_opp_table: opp-table-cpu {
+		compatible = "allwinner,sun50i-h616-operating-points";
+		nvmem-cells = <&cpu_speed_grade>;
+		opp-shared;
+ 
+		opp-480000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <480000000>;
+			opp-microvolt-speed0 = <820000 820000 1100000>; 
+			opp-microvolt-speed1 = <880000 880000 1100000>;
+			opp-microvolt-speed2 = <880000 880000 1100000>;
+		};
+	
+		opp-600000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt-speed0 = <820000 820000 1100000>;
+			opp-microvolt-speed1 = <880000 880000 1100000>;
+			opp-microvolt-speed2 = <880000 880000 1100000>;
+		};
+
+		opp-792000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <792000000>;
+		        opp-microvolt-speed0 = <860000 860000 1100000>;
+			opp-microvolt-speed1 = <940000 940000 1100000>;
+			opp-microvolt-speed2 = <940000 940000 1100000>;
+		};
+
+		opp-1008000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1008000000>;
+			opp-microvolt-speed0 = <900000 900000 1100000>;
+			opp-microvolt-speed1 = <1020000 1020000 1100000>;
+			opp-microvolt-speed2 = <1020000 1020000 1100000>;
+		};
+
+		opp-1200000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt-speed0 = <960000 960000 1100000>;
+			opp-microvolt-speed1 = <1100000 1100000 1100000>;
+			opp-microvolt-speed2 = <1100000 1100000 1100000>;
+		};
+
+		opp-1512000000 {
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			opp-hz = /bits/ 64 <1512000000>;
+			opp-microvolt-speed0 = <1100000 1100000 1100000>;
+			opp-microvolt-speed1 = <1100000 1100000 1100000>;
+			opp-microvolt-speed2 = <1100000 1100000 1100000>;
+		};
+	};
+};
+
+&cpu0 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+ 
+&cpu1 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+ 
+&cpu2 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+ 
+&cpu3 {
+	operating-points-v2 = <&cpu_opp_table>;
+};
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
+index 0666d16ba7d0..54d706286554 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
+@@ -7,6 +7,7 @@
+  */
+ 
+ #include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+ 
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+index 8d8009c7f9a3..41a5a4013091 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+@@ -12,6 +12,11 @@ / {
+ 	compatible = "xunlong,orangepi-zero2", "allwinner,sun50i-h616";
+ };
+ 
+&cpu0  {
+	cpu-supply = <&reg_dcdca>;
+	status = "okay";
+};
+
+ &emac0 {
+ 	phy-supply = <&reg_dcdce>;
+ };
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-cpu-dvfs.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h618-cpu-dvfs.dtsi
+new file mode 100644
+index 0000000000000..0509e3fb22e26
+--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-cpu-dvfs.dtsi
+@@ -0,0 +1,64 @@
+
+
+&r_i2c {
+	status = "okay";
+
+	axp313: pmic@36 {
+		compatible = "x-powers,axp313a";
+		reg = <0x36>;
+		#interrupt-cells = <1>;
+		interrupt-controller;
+		interrupt-parent = <&pio>;
+		interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>;	/* PC9 */
+
+		vin1-supply = <&reg_vcc5v>;
+		vin2-supply = <&reg_vcc5v>;
+		vin3-supply = <&reg_vcc5v>;
+
+		regulators {
+			/* Supplies VCC-PLL and DRAM */
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			/* Supplies VCC-IO, so needs to be always on. */
+			reg_dldo1: dldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3";
+			};
+
+			reg_dcdc1: dcdc1 {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-step-delay-us = <25>;
+				regulator-final-delay-us = <50>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			reg_dcdc2: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-step-delay-us = <25>;
+				regulator-final-delay-us = <50>;
+				regulator-ramp-delay = <200>;
+				regulator-name = "vdd-cpu";
+			};
+
+			reg_dcdc3: dcdc3 {
+				regulator-always-on;
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-step-delay-us = <25>;
+				regulator-final-delay-us = <50>;
+				regulator-name = "vdd-dram";
+			};
+		};
+	};
+};
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
+index 00fe28caac93..edbfc83f390a 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h618-orangepi-zero3.dts
+@@ -6,12 +6,18 @@
+ /dts-v1/;
+ 
+ #include "sun50i-h616-orangepi-zero.dtsi"
+#include "sun50i-h618-cpu-dvfs.dtsi"
+ 
+ / {
+ 	model = "OrangePi Zero3";
+ 	compatible = "xunlong,orangepi-zero3", "allwinner,sun50i-h618";
+ };
+ 
+&cpu0 {
+	cpu-supply = <&reg_dcdc2>;
+	status = "okay";
+};
+
+ &emac0 {
+ 	phy-supply = <&reg_dldo1>;
+ };
+@@ -31,62 +37,6 @@ &mmc0 {
+ 	vmmc-supply = <&reg_dldo1>;
+ };
+ 
+-&r_i2c {
+-	status = "okay";
+-
+-	axp313: pmic@36 {
+-		compatible = "x-powers,axp313a";
+-		reg = <0x36>;
+-		#interrupt-cells = <1>;
+-		interrupt-controller;
+-		interrupt-parent = <&pio>;
+-		interrupts = <2 9 IRQ_TYPE_LEVEL_LOW>;	/* PC9 */
+-
+-		vin1-supply = <&reg_vcc5v>;
+-		vin2-supply = <&reg_vcc5v>;
+-		vin3-supply = <&reg_vcc5v>;
+-
+-		regulators {
+-			/* Supplies VCC-PLL, so needs to be always on. */
+-			reg_aldo1: aldo1 {
+-				regulator-always-on;
+-				regulator-min-microvolt = <1800000>;
+-				regulator-max-microvolt = <1800000>;
+-				regulator-name = "vcc1v8";
+-			};
+-
+-			/* Supplies VCC-IO, so needs to be always on. */
+-			reg_dldo1: dldo1 {
+-				regulator-always-on;
+-				regulator-min-microvolt = <3300000>;
+-				regulator-max-microvolt = <3300000>;
+-				regulator-name = "vcc3v3";
+-			};
+-
+-			reg_dcdc1: dcdc1 {
+-				regulator-always-on;
+-				regulator-min-microvolt = <810000>;
+-				regulator-max-microvolt = <990000>;
+-				regulator-name = "vdd-gpu-sys";
+-			};
+-
+-			reg_dcdc2: dcdc2 {
+-				regulator-always-on;
+-				regulator-min-microvolt = <810000>;
+-				regulator-max-microvolt = <1100000>;
+-				regulator-name = "vdd-cpu";
+-			};
+-
+-			reg_dcdc3: dcdc3 {
+-				regulator-always-on;
+-				regulator-min-microvolt = <1100000>;
+-				regulator-max-microvolt = <1100000>;
+-				regulator-name = "vdd-dram";
+-			};
+-		};
+-	};
+-};
+-
+ &pio {
+ 	vcc-pc-supply = <&reg_dldo1>;
+ 	vcc-pf-supply = <&reg_dldo1>;
+diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
+index fb2875ce1fdd..e63d36839769 100644
+--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
+@@ -104,6 +104,8 @@ static const struct of_device_id allowlist[] __initconst = {
+  */
+ static const struct of_device_id blocklist[] __initconst = {
+ 	{ .compatible = "allwinner,sun50i-h6", },
+	{ .compatible = "allwinner,sun50i-h616", },
+	{ .compatible = "allwinner,sun50i-h618", },
+ 
+ 	{ .compatible = "apple,arm-platform", },
+ 
+diff --git a/drivers/cpufreq/sun50i-cpufreq-nvmem.c b/drivers/cpufreq/sun50i-cpufreq-nvmem.c
+index 6845ab5034ec..5d85bfe475de 100644
+--- a/drivers/cpufreq/sun50i-cpufreq-nvmem.c
+++ b/drivers/cpufreq/sun50i-cpufreq-nvmem.c
+@@ -6,6 +6,9 @@
+  * provide the OPP framework with required information.
+  *
+  * Copyright (C) 2019 Yangtao Li <tiny.windzz@gmail.com>
+ *
+ * ADD efuse_xlate to extract SoC version so that h6 and h616 can coexist.
+ * Version 1 AGM1968 <AGM1968@users.noreply.github.com>
+  */
+ 
+ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+@@ -20,25 +23,62 @@
+ 
+ #define MAX_NAME_LEN	7
+ 
+-#define NVMEM_MASK	0x7
+-#define NVMEM_SHIFT	5
+#define SUN50I_H616_NVMEM_MASK 0x22
+#define SUN50I_H616_NVMEM_SHIFT 5
+#define SUN50I_H6_NVMEM_MASK 0x7
+#define SUN50I_H6_NVMEM_SHIFT 5
+
+struct sunxi_cpufreq_soc_data {
+	u32 (*efuse_xlate) (void *efuse);
+};
+ 
+ static struct platform_device *cpufreq_dt_pdev, *sun50i_cpufreq_pdev;
+ 
+static u32 sun50i_h616_efuse_xlate(void *efuse)
+{
+   u32 efuse_value = (*(u32 *)efuse >> SUN50I_H616_NVMEM_SHIFT) &
+             SUN50I_H616_NVMEM_MASK;
+
+   /* Tested as V1 h616 soc. Expected efuse values are 1 - 3,
+      slowest to fastest */
+   if (efuse_value >=1 && efuse_value <= 3)
+       return efuse_value - 1;
+   else
+       return 0;
+};
+
+static u32 sun50i_h6_efuse_xlate(void *efuse)
+{
+   u32 efuse_value = (*(u32 *)efuse >> SUN50I_H6_NVMEM_SHIFT) &
+             SUN50I_H6_NVMEM_MASK;
+
+   /*
+    * We treat unexpected efuse values as if the SoC was from
+    * the slowest bin. Expected efuse values are 1 - 3, slowest
+    * to fastest.
+   */
+   if (efuse_value >= 1 && efuse_value <= 3)
+       return efuse_value - 1;
+   else
+       return 0;
+};
+
+
+ /**
+  * sun50i_cpufreq_get_efuse() - Determine speed grade from efuse value
+ * @soc_data: pointer to sunxi_cpufreq_soc_data context
+  * @versions: Set to the value parsed from efuse
+  *
+  * Returns 0 if success.
+  */
+-static int sun50i_cpufreq_get_efuse(u32 *versions)
+static int sun50i_cpufreq_get_efuse(const struct sunxi_cpufreq_soc_data *soc_data,
+		u32 *versions)
+ {
+ 	struct nvmem_cell *speedbin_nvmem;
+ 	struct device_node *np;
+ 	struct device *cpu_dev;
+-	u32 *speedbin, efuse_value;
+	u32 *speedbin;
+ 	size_t len;
+-	int ret;
+ 
+ 	cpu_dev = get_cpu_device(0);
+ 	if (!cpu_dev)
+@@ -47,10 +87,9 @@ static int sun50i_cpufreq_get_efuse(u32 *versions)
+ 	np = dev_pm_opp_of_get_opp_desc_node(cpu_dev);
+ 	if (!np)
+ 		return -ENOENT;
+-
+-	ret = of_device_is_compatible(np,
+-				      "allwinner,sun50i-h6-operating-points");
+-	if (!ret) {
+	if (of_device_is_compatible(np, "allwinner,sun50i-h6-operating-points")) {}
+	else if (of_device_is_compatible(np, "allwinner,sun50i-h616-operating-points")) {}
+	else {
+ 		of_node_put(np);
+ 		return -ENOENT;
+ 	}
+@@ -66,17 +105,7 @@ static int sun50i_cpufreq_get_efuse(u32 *versions)
+ 	if (IS_ERR(speedbin))
+ 		return PTR_ERR(speedbin);
+ 
+-	efuse_value = (*speedbin >> NVMEM_SHIFT) & NVMEM_MASK;
+-
+-	/*
+-	 * We treat unexpected efuse values as if the SoC was from
+-	 * the slowest bin. Expected efuse values are 1-3, slowest
+-	 * to fastest.
+-	 */
+-	if (efuse_value >= 1 && efuse_value <= 3)
+-		*versions = efuse_value - 1;
+-	else
+-		*versions = 0;
+	*versions = soc_data->efuse_xlate(speedbin);
+ 
+ 	kfree(speedbin);
+ 	return 0;
+@@ -84,18 +113,23 @@ static int sun50i_cpufreq_get_efuse(u32 *versions)
+ 
+ static int sun50i_cpufreq_nvmem_probe(struct platform_device *pdev)
+ {
+	const struct of_device_id *match;
+ 	int *opp_tokens;
+ 	char name[MAX_NAME_LEN];
+ 	unsigned int cpu;
+ 	u32 speed = 0;
+ 	int ret;
+ 
+	match = dev_get_platdata(&pdev->dev);
+	if (!match)
+		return -EINVAL;
+
+ 	opp_tokens = kcalloc(num_possible_cpus(), sizeof(*opp_tokens),
+ 			     GFP_KERNEL);
+ 	if (!opp_tokens)
+ 		return -ENOMEM;
+ 
+-	ret = sun50i_cpufreq_get_efuse(&speed);
+	ret = sun50i_cpufreq_get_efuse(match-> data, &speed);
+ 	if (ret) {
+ 		kfree(opp_tokens);
+ 		return ret;
+@@ -159,8 +193,18 @@ static struct platform_driver sun50i_cpufreq_driver = {
+ 	},
+ };
+ 
+static const struct sunxi_cpufreq_soc_data sun50i_h616_data = {
+    .efuse_xlate = sun50i_h616_efuse_xlate,
+};
+
+static const struct sunxi_cpufreq_soc_data sun50i_h6_data = {
+    .efuse_xlate = sun50i_h6_efuse_xlate,
+};
+
+ static const struct of_device_id sun50i_cpufreq_match_list[] = {
+-	{ .compatible = "allwinner,sun50i-h6" },
+	{ .compatible = "allwinner,sun50i-h6", .data = &sun50i_h6_data },
+        { .compatible = "allwinner,sun50i-h616", .data = &sun50i_h616_data },
+        { .compatible = "allwinner,sun50i-h618", .data = &sun50i_h616_data },
+ 	{}
+ };
+ MODULE_DEVICE_TABLE(of, sun50i_cpufreq_match_list);
+@@ -196,8 +239,8 @@ static int __init sun50i_cpufreq_init(void)
+ 		return ret;
+ 
+ 	sun50i_cpufreq_pdev =
+-		platform_device_register_simple("sun50i-cpufreq-nvmem",
+-						-1, NULL, 0);
+		platform_device_register_data(NULL,
+		"sun50i-cpufreq-nvmem", -1, match, sizeof(*match));
+ 	ret = PTR_ERR_OR_ZERO(sun50i_cpufreq_pdev);
+ 	if (ret == 0)
+ 		return 0;
+-- 
+Armbian
+
--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-h616-Add-thermal-sensor-and-thermal-zones.patch
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-h616-Add-thermal-sensor-and-thermal-zones.patch
@ -0,0 +1,135 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Kali Prasad <kprasadvnsi@protonmail.com>
+Date: Sun, 19 Sep 2021 08:02:27 +0000
+Subject: arm64: dts: allwinner: h616: Add thermal sensor and thermal zones
+
+There are four sensors, CPU, GPU, VE, and DDR.
+
+Signed-off-by: Kali Prasad <kprasadvnsi@protonmail.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 75 ++++++++++
+ 1 file changed, 75 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+index 7ad1982fb47f..8628a9e3dfca 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+@@ -9,6 +9,7 @@
+ #include <dt-bindings/clock/sun6i-rtc.h>
+ #include <dt-bindings/reset/sun50i-h616-ccu.h>
+ #include <dt-bindings/reset/sun50i-h6-r-ccu.h>
+#include <dt-bindings/thermal/thermal.h>
+ 
+ / {
+ 	interrupt-parent = <&gic>;
+@@ -25,6 +26,8 @@ cpu0: cpu@0 {
+ 			reg = <0>;
+ 			enable-method = "psci";
+ 			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
+ 		};
+ 
+ 		cpu1: cpu@1 {
+@@ -33,6 +36,8 @@ cpu1: cpu@1 {
+ 			reg = <1>;
+ 			enable-method = "psci";
+ 			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
+ 		};
+ 
+ 		cpu2: cpu@2 {
+@@ -41,6 +46,8 @@ cpu2: cpu@2 {
+ 			reg = <2>;
+ 			enable-method = "psci";
+ 			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
+ 		};
+ 
+ 		cpu3: cpu@3 {
+@@ -49,6 +56,8 @@ cpu3: cpu@3 {
+ 			reg = <3>;
+ 			enable-method = "psci";
+ 			clocks = <&ccu CLK_CPUX>;
+			clock-latency-ns = <244144>; /* 8 32k periods */
+			#cooling-cells = <2>;
+ 		};
+ 	};
+ 
+@@ -833,5 +842,71 @@ r_rsb: rsb@7083000 {
+ 			#address-cells = <1>;
+ 			#size-cells = <0>;
+ 		};
+
+		ths: thermal-sensor@5070400 {
+			compatible = "allwinner,sun50i-h616-ths";
+			reg = <0x05070400 0x400>;
+			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_THS>;
+			clock-names = "bus";
+			resets = <&ccu RST_BUS_THS>;
+			nvmem-cells = <&ths_calibration>;
+			nvmem-cell-names = "calibration";
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <500>;
+			polling-delay = <1000>;
+			thermal-sensors = <&ths 2>;
+			sustainable-power = <1000>;
+			k_po = <20>;
+			k_pu = <40>;
+			k_i = <0>;
+
+			trips {
+				cpu_threshold: trip-point@0 {
+					temperature = <60000>;
+					type = "passive";
+					hysteresis = <0>;
+				};
+				cpu_target: trip-point@1 {
+					temperature = <70000>;
+					type = "passive";
+					hysteresis = <0>;
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_target>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu-thermal {
+			polling-delay-passive = <500>;
+			polling-delay = <1000>;
+			thermal-sensors = <&ths 0>;
+			sustainable-power = <1100>;
+		};
+
+		ve-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 1>;
+		};
+
+		ddr-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&ths 3>;
+		};
+ 	};
+ };
+-- 
+Armbian
+
--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-h616-Fix-thermal-zones-missing-trips.patch
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-h616-Fix-thermal-zones-missing-trips.patch
@ -0,0 +1,73 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Micha=C5=82=20Dzieko=C5=84ski?=
+ <michal.dziekonski+github@gmail.com>
+Date: Wed, 3 May 2023 12:17:28 +0000
+Subject: arm64: dts: allwinner: h616: Fix thermal zones (add missing trips)
+
+Signed-off-by: Michal Dziekonski <michal.dziekonski+github@gmail.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 29 ++++++++++
+ 1 file changed, 29 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+index 8628a9e3dfca..17b13d3193cc 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+@@ -877,6 +877,11 @@ cpu_target: trip-point@1 {
+ 					type = "passive";
+ 					hysteresis = <0>;
+ 				};
+				cpu_temp_critical: trip-point@2 {
+					temperature = <110000>;
+					type = "critical";
+					hysteresis = <0>;
+				};
+ 			};
+ 
+ 			cooling-maps {
+@@ -895,18 +900,42 @@ gpu-thermal {
+ 			polling-delay = <1000>;
+ 			thermal-sensors = <&ths 0>;
+ 			sustainable-power = <1100>;
+
+			trips {
+				gpu_temp_critical: trip-point@0 {
+					temperature = <110000>;
+					type = "critical";
+					hysteresis = <0>;
+				};
+			};
+ 		};
+ 
+ 		ve-thermal {
+ 			polling-delay-passive = <0>;
+ 			polling-delay = <0>;
+ 			thermal-sensors = <&ths 1>;
+
+			trips {
+				ve_temp_critical: trip-point@0 {
+					temperature = <110000>;
+					type = "critical";
+					hysteresis = <0>;
+				};
+			};
+ 		};
+ 
+ 		ddr-thermal {
+ 			polling-delay-passive = <0>;
+ 			polling-delay = <0>;
+ 			thermal-sensors = <&ths 3>;
+
+			trips {
+				ddr_temp_critical: trip-point@0 {
+					temperature = <110000>;
+					type = "critical";
+					hysteresis = <0>;
+				};
+			};
+ 		};
+ 	};
+ };
+-- 
+Armbian
+
--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-h616-LED-green_power_on-red_status_heartbeat.patch
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-h616-LED-green_power_on-red_status_heartbeat.patch
@ -0,0 +1,39 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: AGM1968 <AGM1968@users.noreply.github.com>
+Date: Wed, 31 May 2023 08:12:00 +0000
+Subject: LED-green_power_on-red_status_heartbeat
+ arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
+
+Signed-off-by: AGM1968 <AGM1968@users.noreply.github.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi | 7 ++++---
+ 1 file changed, 4 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
+index 0666d16ba7d0..19451a0c85ae 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
+@@ -26,16 +26,17 @@ leds {
+ 		compatible = "gpio-leds";
+ 
+ 		led-0 {
+-			function = LED_FUNCTION_POWER;
+			function = LED_FUNCTION_STATUS;
+ 			color = <LED_COLOR_ID_RED>;
+ 			gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
+-			default-state = "on";
+			linux,default-trigger = "heartbeat";
+ 		};
+ 
+ 		led-1 {
+-			function = LED_FUNCTION_STATUS;
+			function = LED_FUNCTION_POWER;
+ 			color = <LED_COLOR_ID_GREEN>;
+ 			gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
+			default-state = "on";
+ 		};
+ 	};
+ 
+-- 
+Armbian
+
--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-sun50i-h616-Add-GPU-node.patch
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-sun50i-h616-Add-GPU-node.patch
@ -0,0 +1,38 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Jernej Skrabec <jernej.skrabec@gmail.com>
+Date: Fri, 15 Oct 2021 21:07:46 +0200
+Subject: arm64:dts: allwinner: sun50i-h616 Add GPU node
+
+Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 14 ++++++++++
+ 1 file changed, 14 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+index 44f8ae11ca16..26ef79c5d895 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+@@ -108,6 +108,20 @@ soc {
+ 		#size-cells = <1>;
+ 		ranges = <0x0 0x0 0x0 0x40000000>;
+ 
+		gpu: gpu@1800000 {
+			compatible = "allwinner,sun50i-h616-mali",
+				     "arm,mali-bifrost";
+			reg = <0x1800000 0x40000>;
+			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "job", "mmu", "gpu";
+			clocks = <&ccu CLK_GPU0>, <&ccu CLK_BUS_GPU>;
+			clock-names = "core", "bus";
+			resets = <&ccu RST_BUS_GPU>;
+			status = "disabled";
+		};
+
+ 		syscon: syscon@3000000 {
+ 			compatible = "allwinner,sun50i-h616-system-control";
+ 			reg = <0x03000000 0x1000>;
+-- 
+Armbian
+
--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-sun50i-h616-Add-VPU-node.patch
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-sun50i-h616-Add-VPU-node.patch
@ -0,0 +1,55 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Jernej Skrabec <jernej.skrabec@gmail.com>
+Date: Fri, 15 Oct 2021 21:14:55 +0200
+Subject: arm64:dts:allwinner: sun50i-h616 Add VPU node
+
+Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 24 ++++++++++
+ 1 file changed, 24 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+index 26ef79c5d895..944ff2747d27 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+@@ -122,6 +122,17 @@ gpu: gpu@1800000 {
+ 			status = "disabled";
+ 		};
+ 
+		video-codec@1c0e000 {
+			compatible = "allwinner,sun50i-h616-video-engine";
+			reg = <0x01c0e000 0x2000>;
+			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
+				 <&ccu CLK_MBUS_VE>;
+			clock-names = "ahb", "mod", "ram";
+			resets = <&ccu RST_BUS_VE>;
+			interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+			allwinner,sram = <&ve_sram 1>;
+		};
+
+ 		syscon: syscon@3000000 {
+ 			compatible = "allwinner,sun50i-h616-system-control";
+ 			reg = <0x03000000 0x1000>;
+@@ -136,6 +147,19 @@ sram_c: sram@28000 {
+ 				#size-cells = <1>;
+ 				ranges = <0 0x00028000 0x30000>;
+ 			};
+
+			sram_c1: sram@1a00000 {
+				compatible = "mmio-sram";
+				reg = <0x01a00000 0x200000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0 0x01a00000 0x200000>;
+
+				ve_sram: sram-section@0 {
+					compatible = "allwinner,sun50i-h616-sram-c1";
+					reg = <0x000000 0x200000>;
+				};
+			};
+ 		};
+ 
+ 		ccu: clock@3001000 {
+-- 
+Armbian
+
--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-sun50i-h616-PG-12c-pins.patch
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-sun50i-h616-PG-12c-pins.patch
@ -0,0 +1,39 @@
+From a3e54a502cf754b148a8ad06580a3c256bc42b09 Mon Sep 17 00:00:00 2001
+From: Patrick Yavitz <pyavitz@xxxxx.com>
+Date: Thu, 22 Feb 2024 19:31:11 -0500
+Subject: [PATCH] arch: arm64: dts: allwinner: sun50i-h616: PG 12c pins
+
+pins = "PG17", "PG18";
+pins = "PG15", "PG16";
+
+Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+index 17df57e2db0a..e5ce4214a43b 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+@@ -334,6 +334,18 @@ i2c4_ph_pins: i2c4-ph-pins {
+ 				function = "i2c4";
+ 			};
+ 
+			/omit-if-no-ref/
+			i2c3_pg_pins: i2c3-pg-pins {
+				pins = "PG17", "PG18";
+				function = "i2c3";
+			};
+
+			/omit-if-no-ref/
+			i2c4_pg_pins: i2c4-pg-pins {
+				pins = "PG15", "PG16";
+				function = "i2c4";
+			};
+
+ 			ir_rx_pin: ir-rx-pin {
+ 				pins = "PH10";
+ 				function = "ir_rx";
+-- 
+2.39.2
+
--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-sun50i-h616-spi1-cs1-pin.patch
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-allwinner-sun50i-h616-spi1-cs1-pin.patch
@ -0,0 +1,30 @@
+From 64b0221e526f6359a39ab3beb9a693dc964b1112 Mon Sep 17 00:00:00 2001
+From: Patrick Yavitz <pyavitz@xxxxx.com>
+Date: Wed, 6 Mar 2024 06:51:01 -0500
+Subject: [PATCH] arch: arm64: dts: allwinner: sun50i-h616: spi1 cs1 pin
+
+Signed-off-by: Patrick Yavitz <pyavitz@xxxxx.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+index 33f8c758b9e6..1354dca01e78 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+@@ -397,6 +397,12 @@ spi1_cs0_pin: spi1-cs0-pin {
+ 				function = "spi1";
+ 			};
+ 
+			/omit-if-no-ref/
+			spi1_cs1_pin: spi1-cs1-pin {
+				pins = "PH9";
+				function = "spi1";
+			};
+
+ 			uart0_ph_pins: uart0-ph-pins {
+ 				pins = "PH0", "PH1";
+ 				function = "uart0";
+-- 
+2.39.2
+
--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-h616-add-wifi-support-for-orange-pi-zero-2.patch
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-h616-add-wifi-support-for-orange-pi-zero-2.patch
@ -1,19 +1,20 @@
-From 899da8366afd97b1ca59b632036dc313777026da Mon Sep 17 00:00:00 2001
-From: pbiel <pbiel7@gmail.com>
-Date: Fri, 24 Feb 2023 22:14:58 +0100
-Subject: [PATCH] Add wifi power regulator
+From 8e36084386d07a07f755bda978875b1354162019 Mon Sep 17 00:00:00 2001
+From: Gunjan Gupta <viraniac@gmail.com>
+Date: Wed, 13 Dec 2023 19:15:45 +0000
+Subject: [PATCH] arm64: dts: h616: add wifi support for orange pi zero 2 and
+ zero3

 ---
- .../allwinner/sun50i-h616-orangepi-zero2.dts  | 47 +++++++++++++++++++
- 1 file changed, 47 insertions(+)
+ .../allwinner/sun50i-h616-orangepi-zero.dtsi  | 38 +++++++++++++++++++
+ 1 file changed, 38 insertions(+)

-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-index 02893f3ac..88234a139 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-@@ -49,6 +49,53 @@ reg_vcc5v: vcc5v {
- 		regulator-max-microvolt = <5000000>;
- 		regulator-always-on;
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
+index 19451a0c85ae..400966667d1e 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
+@@ -59,6 +59,34 @@ reg_usb1_vbus: regulator-usb1-vbus {
+ 		gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
+ 		status = "okay";
 	};
 +
 +	reg_vcc33_wifi: vcc33-wifi {
@ -43,8 +44,13 @@ index 02893f3ac..88234a139 100644
 +		reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
 +		post-power-on-delay-ms = <200>;
 +	};
-+};
-+
+ };
+ 
+ &ehci1 {
+@@ -90,6 +118,16 @@ &mmc0 {
+ 	status = "okay";
+ };
+ 
 +&mmc1 {
 +	vmmc-supply = <&reg_vcc33_wifi>;
 +	vqmmc-supply = <&reg_vcc_wifi_io>;
@ -53,18 +59,11 @@ index 02893f3ac..88234a139 100644
 +	non-removable;
 +	mmc-ddr-1_8v;
 +	status = "okay";
-+	uwe-bsp {
-+		compatible = "unisoc,uwe_bsp";
-+		keep-power-on;
-+		data-irq;
-+		//adma-tx;
-+		adma-rx;
-+		//blksz-512;
-+		status = "okay";
-+	};
+};
+
+ &ohci1 {
+ 	status = "okay";
 };
- 
- &emac0 {
 -- 
 2.34.1

--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-sun50i-h616-Add-dma-node.patch
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-sun50i-h616-Add-dma-node.patch
@ -0,0 +1,53 @@
+From 8cdd9309fce75995cf3068be5c7ffb65cec51cff Mon Sep 17 00:00:00 2001
+From: Gunjan Gupta <viraniac@gmail.com>
+Date: Wed, 3 Jan 2024 09:53:55 +0000
+Subject: [PATCH] arm64: dts: sun50i-h616: Add dma node
+
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 16 ++++++++++++++++
+ 1 file changed, 16 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+index 2424a2827455..e71b79ebced8 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
+@@ -170,6 +170,18 @@ mixer0_out_tcon_top_mixer0: endpoint {
+ 			};
+ 		};
+ 
+		dma: dma-controller@3002000 {
+			compatible = "allwinner,sun50i-h6-dma";
+			reg = <0x03002000 0x1000>;
+			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
+			clock-names = "bus", "mbus";
+			dma-channels = <16>;
+			dma-requests = <49>;
+			resets = <&ccu RST_BUS_DMA>;
+			#dma-cells = <1>;
+		};
+
+ 		gpu: gpu@1800000 {
+ 			compatible = "allwinner,sun50i-h616-mali",
+ 				     "arm,mali-bifrost";
+@@ -606,6 +618,8 @@ spi0: spi@5010000 {
+ 			interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ 			clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
+ 			clock-names = "ahb", "mod";
+			dmas = <&dma 22>, <&dma 22>;
+			dma-names = "rx", "tx";
+ 			resets = <&ccu RST_BUS_SPI0>;
+ 			pinctrl-names = "default";
+ 			pinctrl-0 = <&spi0_pins>;
+@@ -621,6 +635,8 @@ spi1: spi@5011000 {
+ 			interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ 			clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>;
+ 			clock-names = "ahb", "mod";
+			dmas = <&dma 23>, <&dma 23>;
+			dma-names = "rx", "tx";
+ 			resets = <&ccu RST_BUS_SPI1>;
+ 			pinctrl-names = "default";
+ 			pinctrl-0 = <&spi1_pins>;
+-- 
+2.34.1
+
--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-sun50i-h616-orangepi-zero2-Enable-GPU-mali.patch
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-sun50i-h616-orangepi-zero2-Enable-GPU-mali.patch
@ -0,0 +1,29 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Jernej Skrabec <jernej.skrabec@gmail.com>
+Date: Fri, 15 Oct 2021 21:09:42 +0200
+Subject: arm64:dts: sun50i-h616-orangepi-zero2 Enable GPU mali
+
+Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+index d83852e72f06..8d8009c7f9a3 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
+@@ -16,6 +16,11 @@ &emac0 {
+ 	phy-supply = <&reg_dcdce>;
+ };
+ 
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
+ &mmc0 {
+ 	vmmc-supply = <&reg_dcdce>;
+ };
+-- 
+Armbian
+
--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-sun50i-h616-orangepi-zero2-reg_usb1_vbus-status-ok.patch
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/arm64-dts-sun50i-h616-orangepi-zero2-reg_usb1_vbus-status-ok.patch
@ -0,0 +1,24 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: The-going <48602507+The-going@users.noreply.github.com>
+Date: Wed, 14 Dec 2022 20:15:41 +0300
+Subject: arm64: dts: sun50i-h616-orangepi-zero2: reg_usb1_vbus status ok
+
+---
+ arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
+index 15290e6892fc..0666d16ba7d0 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero.dtsi
+@@ -56,6 +56,7 @@ reg_usb1_vbus: regulator-usb1-vbus {
+ 		vin-supply = <&reg_vcc5v>;
+ 		enable-active-high;
+ 		gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
+		status = "okay";
+ 	};
+ };
+ 
+-- 
+Armbian
+
--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/drv-nvmem-sunxi_sid-Support-SID-on-H616.patch
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/drv-nvmem-sunxi_sid-Support-SID-on-H616.patch
@ -0,0 +1,41 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Kali Prasad <kprasadvnsi@protonmail.com>
+Date: Sun, 19 Sep 2021 08:02:27 +0000
+Subject: drv:nvmem:sunxi_sid: Support SID on H616
+
+Add support for H616's SID controller. It supports 4K-bit
+EFUSE.
+
+Signed-off-by: Kali Prasad <kprasadvnsi@protonmail.com>
+---
+ drivers/nvmem/sunxi_sid.c | 7 +++++++
+ 1 file changed, 7 insertions(+)
+
+diff --git a/drivers/nvmem/sunxi_sid.c b/drivers/nvmem/sunxi_sid.c
+index 5d364d85347f..c526fe4abe22 100644
+--- a/drivers/nvmem/sunxi_sid.c
+++ b/drivers/nvmem/sunxi_sid.c
+@@ -204,6 +204,12 @@ static const struct sunxi_sid_cfg sun50i_h6_cfg = {
+ 	.size = 0x200,
+ };
+ 
+static const struct sunxi_sid_cfg sun50i_h616_cfg = {
+	.value_offset = 0x200,
+	.size = 0x100,
+	.need_register_readout = true,
+};
+
+ static const struct of_device_id sunxi_sid_of_match[] = {
+ 	{ .compatible = "allwinner,sun4i-a10-sid", .data = &sun4i_a10_cfg },
+ 	{ .compatible = "allwinner,sun7i-a20-sid", .data = &sun7i_a20_cfg },
+@@ -213,6 +219,7 @@ static const struct of_device_id sunxi_sid_of_match[] = {
+ 	{ .compatible = "allwinner,sun50i-a64-sid", .data = &sun50i_a64_cfg },
+ 	{ .compatible = "allwinner,sun50i-h5-sid", .data = &sun50i_a64_cfg },
+ 	{ .compatible = "allwinner,sun50i-h6-sid", .data = &sun50i_h6_cfg },
+	{ .compatible = "allwinner,sun50i-h616-sid", .data = &sun50i_h616_cfg },
+ 	{/* sentinel */},
+ };
+ MODULE_DEVICE_TABLE(of, sunxi_sid_of_match);
+-- 
+Armbian
+
--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/drv-rtc-sun6i-Add-Allwinner-H616-support.patch
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/drv-rtc-sun6i-Add-Allwinner-H616-support.patch
@ -0,0 +1,45 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Andre Przywara <andre.przywara@arm.com>
+Date: Wed, 21 Apr 2021 12:46:43 +0100
+Subject: drv:rtc: sun6i: Add Allwinner H616 support
+
+The H616 RTC changes its day storage to the newly introduced linear day
+scheme, so pair the new compatible string with this feature flag.
+The clock part is missing an external 32768 Hz oscillator input pin,
+for future expansion we must thus ignore any provided clock for now.
+
+Signed-off-by: Andre Przywara <andre.przywara@arm.com>
+---
+ drivers/rtc/rtc-sun6i.c | 16 ++++++++++
+ 1 file changed, 16 insertions(+)
+
+diff --git a/drivers/rtc/rtc-sun6i.c b/drivers/rtc/rtc-sun6i.c
+index 190ea007d82e..e0b85a0d5645 100644
+--- a/drivers/rtc/rtc-sun6i.c
+++ b/drivers/rtc/rtc-sun6i.c
+@@ -389,6 +389,22 @@ static void __init sun50i_h6_rtc_clk_init(struct device_node *node)
+ CLK_OF_DECLARE_DRIVER(sun50i_h6_rtc_clk, "allwinner,sun50i-h6-rtc",
+ 		      sun50i_h6_rtc_clk_init);
+ 
+static const struct sun6i_rtc_clk_data sun50i_h616_rtc_data = {
+	.rc_osc_rate = 16000000,
+	.fixed_prescaler = 32,
+	.has_prescaler = 1,
+	.has_out_clk = 1,
+	.no_ext_losc = 1,
+};
+
+static void __init sun50i_h616_rtc_clk_init(struct device_node *node)
+{
+	sun6i_rtc_clk_init(node, &sun50i_h616_rtc_data);
+}
+
+CLK_OF_DECLARE_DRIVER(sun50i_h616_rtc_clk, "allwinner,sun50i-h616-rtc",
+		      sun50i_h616_rtc_clk_init);
+
+ /*
+  * The R40 user manual is self-conflicting on whether the prescaler is
+  * fixed or configurable. The clock diagram shows it as fixed, but there
+-- 
+Armbian
+
--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/drv-rtc-sun6i-support-RTCs-without-external-LOSCs.patch
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/drv-rtc-sun6i-support-RTCs-without-external-LOSCs.patch
@ -0,0 +1,68 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Andre Przywara <andre.przywara@arm.com>
+Date: Mon, 14 Jun 2021 23:02:45 +0100
+Subject: drv:rtc:sun6i: support RTCs without external LOSCs
+
+Some newer Allwinner RTCs (for instance the one in the H616 SoC) lack
+a pin for an external 32768 Hz oscillator. As a consequence, this LOSC
+can't be selected as the RTC clock source, and we must rely on the
+internal RC oscillator.
+To allow additions of clocks to the RTC node, add a feature bit to ignore
+any provided clocks for now (the current code would think this is the
+external LOSC). Later DTs and code can then for instance add the PLL
+based clock input, and older kernel won't get confused.
+
+Signed-off-by: Andre Przywara <andre.przywara@arm.com>
+Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
+---
+ drivers/rtc/rtc-sun6i.c | 16 +++++++---
+ 1 file changed, 11 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/rtc/rtc-sun6i.c b/drivers/rtc/rtc-sun6i.c
+index 02129ea346c1..190ea007d82e 100644
+--- a/drivers/rtc/rtc-sun6i.c
+++ b/drivers/rtc/rtc-sun6i.c
+@@ -137,6 +137,7 @@ struct sun6i_rtc_clk_data {
+ 	unsigned int has_out_clk : 1;
+ 	unsigned int has_losc_en : 1;
+ 	unsigned int has_auto_swt : 1;
+	unsigned int no_ext_losc : 1;
+ };
+ 
+ #define RTC_LINEAR_DAY	BIT(0)
+@@ -260,7 +261,7 @@ static void __init sun6i_rtc_clk_init(struct device_node *node,
+ 	}
+ 
+ 	/* Switch to the external, more precise, oscillator, if present */
+-	if (of_property_present(node, "clocks")) {
+	if (!rtc->data->no_ext_losc && of_get_property(node, "clocks", NULL)) {
+ 		reg |= SUN6I_LOSC_CTRL_EXT_OSC;
+ 		if (rtc->data->has_losc_en)
+ 			reg |= SUN6I_LOSC_CTRL_EXT_LOSC_EN;
+@@ -284,14 +285,19 @@ static void __init sun6i_rtc_clk_init(struct device_node *node,
+ 	}
+ 
+ 	parents[0] = clk_hw_get_name(rtc->int_osc);
+-	/* If there is no external oscillator, this will be NULL and ... */
+-	parents[1] = of_clk_get_parent_name(node, 0);
+	if (rtc->data->no_ext_losc) {
+		parents[1] = NULL;
+		init.num_parents = 1;
+	} else {
+		/* If there is no external oscillator, this will be NULL and */
+		parents[1] = of_clk_get_parent_name(node, 0);
+		/* ... number of clock parents will be 1. */
+		init.num_parents = of_clk_get_parent_count(node) + 1;
+	}
+ 
+ 	rtc->hw.init = &init;
+ 
+ 	init.parent_names = parents;
+-	/* ... number of clock parents will be 1. */
+-	init.num_parents = of_clk_get_parent_count(node) + 1;
+ 	of_property_read_string_index(node, "clock-output-names", 0,
+ 				      &init.name);
+ 
+-- 
+Armbian
+
--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/drv-soc-sunxi-sram-Add-SRAM-C1-H616-handling.patch
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/drv-soc-sunxi-sram-Add-SRAM-C1-H616-handling.patch
@ -0,0 +1,41 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Jernej Skrabec <jernej.skrabec@gmail.com>
+Date: Sat, 16 Oct 2021 21:26:41 +0200
+Subject: drv:soc: sunxi: sram: Add SRAM C1 H616 handling
+
+Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
+---
+ drivers/soc/sunxi/sunxi_sram.c | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+diff --git a/drivers/soc/sunxi/sunxi_sram.c b/drivers/soc/sunxi/sunxi_sram.c
+index 4458b2e0562b..9e65d8dfe355 100644
+--- a/drivers/soc/sunxi/sunxi_sram.c
+++ b/drivers/soc/sunxi/sunxi_sram.c
+@@ -70,6 +70,12 @@ static struct sunxi_sram_desc sun4i_a10_sram_c1 = {
+ 				  SUNXI_SRAM_MAP(0x7fffffff, 1, "ve")),
+ };
+ 
+static struct sunxi_sram_desc sun50i_h616_sram_c1 = {
+	.data	= SUNXI_SRAM_DATA("C1", 0x0, 0x0, 31,
+				  SUNXI_SRAM_MAP(0x7fffffff, 0, "cpu"),
+				  SUNXI_SRAM_MAP(0, 1, "ve")),
+};
+
+ static struct sunxi_sram_desc sun4i_a10_sram_d = {
+ 	.data	= SUNXI_SRAM_DATA("D", 0x4, 0x0, 1,
+ 				  SUNXI_SRAM_MAP(0, 0, "cpu"),
+@@ -99,6 +105,10 @@ static const struct of_device_id sunxi_sram_dt_ids[] = {
+ 		.compatible	= "allwinner,sun50i-a64-sram-c",
+ 		.data		= &sun50i_a64_sram_c.data,
+ 	},
+	{
+		.compatible	= "allwinner,sun50i-h616-sram-c1",
+		.data		= &sun50i_h616_sram_c1.data,
+	},
+ 	{}
+ };
+ 
+-- 
+Armbian
+
--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/drv-staging-media-sunxi-cedrus-add-H616-variant.patch
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/drv-staging-media-sunxi-cedrus-add-H616-variant.patch
@ -0,0 +1,44 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Jernej Skrabec <jernej.skrabec@gmail.com>
+Date: Fri, 15 Oct 2021 21:49:45 +0200
+Subject: drv:staging:media:sunxi:cedrus: add H616 variant
+
+Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
+---
+ drivers/staging/media/sunxi/cedrus/cedrus.c | 13 ++++++++++
+ 1 file changed, 13 insertions(+)
+
+diff --git a/drivers/staging/media/sunxi/cedrus/cedrus.c b/drivers/staging/media/sunxi/cedrus/cedrus.c
+index a0f9f4a5b03a..160bd376eb58 100644
+--- a/drivers/staging/media/sunxi/cedrus/cedrus.c
+++ b/drivers/staging/media/sunxi/cedrus/cedrus.c
+@@ -651,6 +651,15 @@ static const struct cedrus_variant sun50i_h6_cedrus_variant = {
+ 	.mod_rate	= 600000000,
+ };
+ 
+static const struct cedrus_variant sun50i_h616_cedrus_variant = {
+	.capabilities	= CEDRUS_CAPABILITY_UNTILED |
+			  CEDRUS_CAPABILITY_MPEG2_DEC |
+			  CEDRUS_CAPABILITY_H264_DEC |
+			  CEDRUS_CAPABILITY_H265_DEC |
+			  CEDRUS_CAPABILITY_VP8_DEC,
+	.mod_rate	= 600000000,
+};
+
+ static const struct of_device_id cedrus_dt_match[] = {
+ 	{
+ 		.compatible = "allwinner,sun4i-a10-video-engine",
+@@ -696,6 +705,10 @@ static const struct of_device_id cedrus_dt_match[] = {
+ 		.compatible = "allwinner,sun50i-h6-video-engine",
+ 		.data = &sun50i_h6_cedrus_variant,
+ 	},
+	{
+		.compatible = "allwinner,sun50i-h616-video-engine",
+		.data = &sun50i_h6_cedrus_variant,
+	},
+ 	{ /* sentinel */ }
+ };
+ MODULE_DEVICE_TABLE(of, cedrus_dt_match);
+-- 
+Armbian
+
--- a/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/h61x-common-6_6.scc
+++ b/recipes-kernel/linux/linux-mainline/sunxi-kmeta/bsp/h61x/h61x-common-6_6.scc
@ -0,0 +1,24 @@
+# Common patches for h616 and h618
+# Ported from armbian
+# https://github.com/armbian/build/tree/main/patch/kernel/archive/sunxi-6.6/patches.armbian
+# Armabian includes a hack hdmi output not included here: drivers-hack-for-h616-hdmi-video-output.patch
+
+patch add-nodes-for-sunxi-info-addr-dump-reg.patch
+patch arm64-dts-allwinner-h616-Add-device-node-for-SID.patch
+patch arm64-dts-allwinner-h616-Add-efuse_xlate-cpu-frequency-scaling-v1_6_2.patch
+patch arm64-dts-allwinner-h616-Add-thermal-sensor-and-thermal-zones.patch
+patch arm64-dts-allwinner-h616-Fix-thermal-zones-missing-trips.patch
+patch arm64-dts-allwinner-h616-LED-green_power_on-red_status_heartbeat.patch
+patch arm64-dts-allwinner-sun50i-h616-Add-GPU-node.patch
+patch arm64-dts-allwinner-sun50i-h616-Add-VPU-node.patch
+patch arm64-dts-allwinner-sun50i-h616-PG-12c-pins.patch
+patch arm64-dts-allwinner-sun50i-h616-spi1-cs1-pin.patch
+
+patch arm64-dts-sun50i-h616-Add-dma-node.patch
+patch drv-nvmem-sunxi_sid-Support-SID-on-H616.patch
+patch drv-rtc-sun6i-Add-Allwinner-H616-support.patch
+patch drv-rtc-sun6i-support-RTCs-without-external-LOSCs.patch
+patch drv-soc-sunxi-sram-Add-SRAM-C1-H616-handling.patch
+patch drv-staging-media-sunxi-cedrus-add-H616-variant.patch
+patch nvmem-sunxi_sid-add-sunxi_get_soc_chipid-sunxi_get_serial.patch
+
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Marek Belisko	eaa81c64b9	Merge pull request #443 from okaestne/chore/kernel-cleanup chore: clean up old kernel versions and fix KERNEL_DEVICETREE handling	2025-04-05 23:04:32 +02:00
Oliver Kästner	cabb64ab12	linux-mainline: fix spacing with KERNEL_FEATURES:prepend Prepends should always end with a space char. Fix that by just turning it into an append. Change the second prepend to an append for consistency. Signed-off-by: Oliver Kästner <git@oliver-kaestner.de>	2025-03-31 12:31:50 +02:00
Oliver Kästner	d7b7bc10b1	ap6212: add missing leading space to append Signed-off-by: Oliver Kästner <git@oliver-kaestner.de>	2025-03-31 12:31:50 +02:00
Marek Belisko	561c1211f8	Merge pull request #444 from okaestne/feat/linux-6.6.85 linux-mainline: bump to 6.6.85	2025-03-31 12:21:15 +02:00
Oliver Kästner	ef3adc7f53	linux-mainline: bump to 6.6.85 Signed-off-by: Oliver Kästner <git@oliver-kaestner.de>	2025-03-30 00:56:00 +01:00
Oliver Kästner	57aeb9103d	chore: drop stale kmeta drop kmeta for older and removed kernel versions Signed-off-by: Oliver Kästner <git@oliver-kaestner.de>	2025-03-27 23:52:14 +01:00
Oliver Kästner	3c1d2b073b	fix handling KERNEL_DEVICETREE with allwinner/ prefix Since linux 6.5, .dts files live in vendor subdirs. Fix all `KERNEL_DEVICETREE` definitions to contain the `allwinner` subdir as prefix and drop code that previously added the prefix on demand. On the other hand, drop the prefix for `BOOT_IMAGE_FILES`, which searches the .dtb within `DEPLOY_DIR`. Signed-off-by: Oliver Kästner <git@oliver-kaestner.de>	2025-03-24 18:26:14 +01:00
Oliver Kästner	5e74f7e4d7	chore: drop linux-mainline pre-v6.5 patches Signed-off-by: Oliver Kästner <git@oliver-kaestner.de>	2025-03-24 18:26:14 +01:00
Oliver Kästner	2acdec5212	chore: drop linux-mainline v6.5.11 Signed-off-by: Oliver Kästner <git@oliver-kaestner.de>	2025-03-24 18:26:14 +01:00
Oliver Kästner	9b81e35f15	chore: drop linux-mainline v6.1.9 Signed-off-by: Oliver Kästner <git@oliver-kaestner.de>	2025-03-24 18:26:14 +01:00
Oliver Kästner	820f782db6	chore: drop linux-mainline v5.15.91 Signed-off-by: Oliver Kästner <git@oliver-kaestner.de>	2025-03-24 18:26:14 +01:00
Marek Belisko	1c14532fed	Merge pull request #441 from okaestne/feat/ap6212-bt ap6212: enable bluetooth support	2025-03-21 11:06:38 +01:00
Oliver Kästner	992691c2bc	ap6212: enable bluetooth support	2025-03-21 00:39:11 +01:00
Marek Belisko	d58e8c36d7	Merge pull request #440 from okaestne/feat/machine-feature-wifi-bt feat: add MACHINE_FEATURE wifi and bluetooth for AP6212 and AP6330 boards	2025-03-17 21:33:07 +01:00
Oliver Kästner	dcd6baa7cf	feat: add MACHINE_FEATURE wifi and bluetooth for AP6212 and AP6330 boards Signed-off-by: Oliver Kästner <git@oliver-kaestner.de>	2025-03-17 21:03:59 +01:00
Marek Belisko	e828ec13be	Merge pull request #439 from okaestne/fix/opi0-dts-mmc linux-mainline: dts: orangepi-zero: add mmc aliases for consistent enumeration	2025-03-17 09:00:57 +01:00
Oliver Kästner	2998db9ab3	linux-mainline: dts: orangepi-zero: add mmc aliases for consistent enumeration This fixes random boot failures. Same workaround as in the other patches. Signed-off-by: Oliver Kästner <git@oliver-kaestner.de>	2025-03-16 23:56:47 +01:00
Marek Belisko	3d4bcd1c54	Merge pull request #437 from okaestne/master Add BananaPi M2 Berry support	2025-01-20 09:22:56 +01:00
Oliver Kästner	682a3dffc7	Add BananaPi M2 Berry support Add `bananapi-m2-berry` machine conf and enable WiFi for it.	2025-01-19 01:24:09 +01:00
Marek Belisko	363feb2ce8	Merge pull request #435 from linux-sunxi/fix-u-boot-loadaddr sunxi64.inc: Fix wrong UBOOT_LOADADDRESS variable value	2025-01-07 22:15:54 +01:00
Marek Belisko	a34349d67b	sunxi64.inc: Fix wrong UBOOT_LOADADDRESS variable value Signed-off-by: Marek Belisko <marek.belisko@gmail.com>	2025-01-07 10:02:40 +01:00
Marek Belisko	a00dc47b24	Merge pull request #432 from stgloorious/stgloor/mmc-alias recipes-kernel/linux-mainline: add MMC alias for Olinuxino A20	2025-01-01 20:17:20 +01:00
Stefan Gloor	a03d4270a1	recipes-kernel/linux-mainline: add MMC alias for Olinuxino A20 Add patch that adds MMC aliases to device tree for consistent enumeration of SD cards. Signed-off-by: Stefan Gloor <code@stefan-gloor.ch>	2025-01-01 16:35:41 +00:00
Marek Belisko	ca60ffbc53	Merge pull request #430 from leon-anavi/master-fix-u-boot-a80 u-boot_%.bbappend: Fix U-Boot for sun9i	2024-12-19 10:40:25 +01:00
Leon Anavi	ab9690a0c1	u-boot_%.bbappend: Fix U-Boot for sun9i Use a proper fix instead of reverting U-Boot commit ffb0294. After reporting this issue to the U-Boot mailing list, a patch that works on Allwinner A80 machines like Merrii A80 Optimus board was proposed by Andre Przywara: https://lists.denx.de/pipermail/u-boot/2024-December/575050.html Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>	2024-12-14 13:41:31 +02:00
Marek Belisko	f2f4c6a0bc	Merge pull request #429 from leon-anavi/master-ap6330 Enable AMPAK AP6330 WiFi and Bluetooth	2024-12-12 08:10:14 +01:00
Leon Anavi	0724baeaaf	Enable AMPAK AP6330 WiFi and Bluetooth Enable AMPAK AP6330 that combines Broadcom Wifi (BCM4330) and Bluetooth 4.0 (BCM40183) chips for sun9i devices such as Merrii A80 Optimus and Cubieboard 4. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>	2024-12-12 01:12:31 +02:00
Marek Belisko	c877916982	Merge pull request #426 from stgloorious/stgloor/setuptools-pr recipes/devtools: replace distutils3.bbclass with setuptools3.bbclass	2024-12-10 08:35:02 +01:00
Stefan Gloor	dbf43ca34a	recipes/devtools: replace distutils3.bbclass with setuptools3.bbclass distutils3 is deprecated and its use produces warnings during build: WARNING: distutils-common-base.bbclass is deprecated, please use setuptools3-base.bbclass instead WARNING: distutils3-base.bbclass is deprecated, please use setuptools3-base.bbclass instead WARNING: distutils3.bbclass is deprecated, please use setuptools3.bbclass instead setuptools3 should be a drop-in replacement. Signed-off-by: Stefan Gloor <code@stefan-gloor.ch>	2024-12-10 01:02:21 +00:00
Marek Belisko	80c3f3ee74	Merge pull request #425 from leon-anavi/cubieboard4 cubieboard4.conf: Add machine	2024-12-09 22:03:47 +01:00
Leon Anavi	4145ca429f	cubieboard4.conf: Add machine Add machine cubieboard4 for Cubieboard 4 with Allwinner A80 SoC from the sun9i family with mainline U-Boot and Linux kernel. Thanks to Lazar Hristov for testing core-image-base on the machine. Tested-by: Lazar Hristov <lhristov@gmail.com> Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>	2024-12-09 22:51:27 +02:00
Marek Belisko	3d37166570	Merge pull request #424 from leon-anavi/merrii-a80-optimus Add Merrii A80 Optimus board	2024-12-09 21:00:38 +01:00
Leon Anavi	cfd534a0e0	u-boot_%.bbappend: Fix for sun9i Temporary revert commit ffb0294 from 12 Nov 2023 for device with Allwinner A80 SoC (aka sun9i): sunxi: board: simplify early PMIC setup conditions On Merrii A80 Optimus this git commit causes U-Boot to hang at: Starting kernel ... Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>	2024-12-09 19:14:03 +02:00
Leon Anavi	43d1e49c0e	sun9i/defconfig: Default kernel defconfig Add a default Linux kernel defconfig for devices from the sun9i family with Allwinner A80 SoC such as Merrii A80 Optimus board. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>	2024-12-09 18:54:19 +02:00
Leon Anavi	dabffb137c	merrii-a80-optimus.conf: Add machine Add machine merrii-a80-optimus for Merrii A80 Optimus development board that is supported by U-Boot and mainline Linux kernel. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>	2024-12-09 18:51:14 +02:00
Leon Anavi	2f6e00210b	sun9i.inc: Add SoC family sun9i Create SoC family sun9i for machines with Allwinner A80 that are supported by mainline U-Boot and mainline Linux kernel. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>	2024-12-09 18:03:21 +02:00
Marek Belisko	5a5ca0e05b	Merge pull request #422 from gye976/master recipes-graphics/mesa: Fix bitbake parsing error	2024-11-04 09:38:30 +01:00
Gyeyoung Baek	9f2f369549	recipes-graphics/mesa: Fix bitbake parsing error there was the following error, ERROR: No recipes in default available for: /home/gye/yocto/meta-sunxi/recipes-graphics/mesa/mesa-gl_%.bbappend /home/gye/yocto/meta-sunxi/recipes-graphics/mesa/mesa_%.bbappend so i renamed mesa_%.bbappend to mesa.bbappend, and mesa-gl_%.bbappend to mesa-gl.bbappend	2024-10-31 18:57:33 +09:00
Marek Belisko	0825f43fe2	Merge pull request #419 from ovpanait/master u-boot: apply ttyS3 patch only for mangopi-mq-t-tt13 builds	2024-10-17 21:56:52 +02:00
Ovidiu Panait	187cd6d342	u-boot: apply ttyS3 patch only for mangopi-mq-t-tt13 builds For all boards except mangopi-mq-t-tt13, switch back the serial console to ttyS0. Apply the ttyS3 patch added in commit [1] only when building for the mangopi-mq-t-tt13 board. Boot tested on orangepi-zero2 board - the kernel logs are again printed to the debug serial console. [1] `9edbede7bc` ("u-boot: Fix console for mangopi-mq-r-tt13 board") Signed-off-by: Ovidiu Panait <ovidiu.panait.oss@gmail.com>	2024-10-17 22:34:36 +03:00
Marek Belisko	2e9fc04500	Merge pull request #417 from leon-anavi/xradio-firmware-branch xradio-firmware: Add branch to SRC_URI	2024-08-20 14:24:50 +02:00
Leon Anavi	a997050889	xradio-firmware: Add branch to SRC_URI Explicitly specify a branch parameter and fix the warning: The future default branch used by tools and repositories is uncertain and we will therefore soon require this is set in all git urls. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>	2024-08-20 15:20:55 +03:00
Marek Belisko	9c47e507e3	Merge pull request #416 from leon-anavi/add-upstream-status linux-mainline/6.5/*.patch: Add Upstream-Status	2024-08-16 21:31:43 +02:00
Leon Anavi	a2d3d5ffab	linux-mainline/6.5/*.patch: Add Upstream-Status Add Upstream-Status in patches to fix QA issues. Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>	2024-08-16 19:23:33 +03:00
Marek Belisko	42f4ad510d	Merge pull request #411 from ludiazv/new-opizero2 Support for Orange pi zero 2 for 6.6 LTS	2024-06-17 16:05:33 +02:00
Marek Belisko	a83a18e526	Merge pull request #413 from alperak/master recipes: Switch away from S = WORKDIR and use UNPACKDIR instead of WO…	2024-06-17 16:04:33 +02:00
alperak	33d7e2bb51	recipes: Switch away from S = WORKDIR and use UNPACKDIR instead of WORKDIR - The layer compability has also been updated in this PR. * Using S = ${WORKDIR} is no longer supported. * UNPACKDIR is new contruct for do_unpack things in latest master we should be using that instead of WORKDIR for referencing those files. * We don't know yet what changes will be needed to stay compatible with final styhead, but we already know that the last changes for UNPACKDIR aren't compatible with scarthgap, nanbield or others. https://lists.openembedded.org/g/openembedded-architecture/message/2007 https://docs.yoctoproject.org/dev/ref-manual/variables.html?highlight=unpackdir#term-UNPACKDIR Signed-off-by: alperak <alperyasinak1@gmail.com>	2024-06-05 17:25:20 +03:00
ludiazv	2a408a1350	update opi zero 2 with auto load modules for wifi and bt	2024-05-23 14:28:05 +02:00
ludiazv	31519e547e	remove hack for hdmi out	2024-05-23 14:26:00 +02:00
ludiazv	a2e503b82e	fix/improve MAC address management	2024-05-23 09:55:55 +02:00
ludiazv	4a04ddfb3e	h616 and h618 patches	2024-05-22 14:43:59 +02:00
ludiazv	20e638ef5f	add opizero 2 to 6.6	2024-05-22 12:48:55 +02:00
Marek Belisko	322843f576	pya20: Added support for olinuxino-a20lime2-emmc Signed-off-by: Marek Belisko <marek.belisko@gmail.com>	2024-05-13 09:19:55 +02:00
Marek Belisko	f70de55509	Merge pull request #406 from alperak/master Add Orange Pi Prime machine support	2024-05-09 12:04:53 +02:00
alperak	2f84e8ff67	Add Orange Pi Prime machine support - Ethernet, WiFi, Bluetooth, USBs are working fine but HDMI is working until U-Boot loading the kernel. Then it stop working. - Tested with core-image-base and kernel mainline 6.6.28 Signed-off-by: alperak <alperyasinak1@gmail.com>	2024-05-08 22:58:22 +03:00
Marek Belisko	3429331a8c	Merge pull request #409 from SaskatoonTechworks/dankm/issues Fix various Yocto compatibility issues	2024-05-07 22:05:00 +02:00
Dan McGregor	05ff172139	trusted-firmware: Make append machine specific	2024-05-07 10:33:28 -06:00
Dan McGregor	608ae0cc0f	xserver-xorg: don't unconditionally add xshmfence This is only required if dri3 is enabled in the server. It shouldn't be included unconditionally. Arguably this should be put in openembedded-core, but for now it's safe to put here.	2024-05-07 10:26:09 -06:00
Dan McGregor	f8aeeaeddb	linux: change licence name Use SPDX name for the kernel, oe-core changed a long time ago and now we're throwing licence name warnings.	2024-05-07 10:26:09 -06:00
Dan McGregor	b756926593	linux-firmware: Only add firmware to sunxi machines It doesn't make sense to unconditionally include these firmware files on other machines. Gate it on whether we're a sunxi machine.	2024-05-07 10:26:09 -06:00
Marek Belisko	197bc04dac	Merge pull request #405 from ludiazv/new-opi3-lts Basic support for orange pi 3 lts	2024-05-07 13:46:31 +02:00
Marek Belisko	4afe6a0b17	Merge branch 'master' into new-opi3-lts	2024-05-07 13:46:22 +02:00
Marek Belisko	9edbede7bc	u-boot: Fix console for mangopi-mq-r-tt13 board Signed-off-by: Marek Belisko <marek.belisko@gmail.com>	2024-05-07 11:39:54 +02:00
Marek Belisko	2f291239fe	conf/machine: add support for MangoPi MQ-R T113-S3 Signed-off-by: Leo Soares <leojrfs@gmail.com> Signed-off-by: Marek Belisko <marek.belisko@gmail.com>	2024-05-07 11:39:50 +02:00
ludiazv	0c874c99f7	add preferred kernel version to sunxi64	2024-04-28 01:40:51 +02:00
ludiazv	916ecc0e9d	update opi 3lts machine	2024-04-28 01:40:20 +02:00
ludiazv	17b8e40209	add kernel features	2024-04-28 01:39:48 +02:00
ludiazv	c19b5742bd	update uwe5622 patches	2024-04-28 01:39:09 +02:00
ludiazv	0437a1df6b	add kernel patches for orangepi-3lts for 6.1 6.5 kernels(KMETA)	2024-04-25 23:44:57 +02:00
ludiazv	96453886e2	add wifi uwe driver firmware and kernel support(KMETA)	2024-04-25 23:44:57 +02:00
ludiazv	10173513ea	add orange-pi-3lts machine config and u-boot support for this board	2024-04-25 23:44:57 +02:00
Marek Belisko	c475a1851a	linux-mainline: Added LINUX_VERSION variable Fixes: File "/home/retpolanne/Dev/orange-pi-one-plus-image/poky/scripts/lib/devtool/standard.py", line 839, in modify if (os.path.exists(srcdir) and os.listdir(srcdir)) and (kernelVersion in staging_kerVer and staging_kbranch == kbranch): ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ TypeError: 'in ' requires string as left operand, not NoneType While running devtool modify virtual/kernel. Signed-off-by: Marek Belisko <marek.belisko@gmail.com>	2024-04-25 08:52:15 +02:00
Marek Belisko	7cd5e692b7	conf: Added scarthgap compat Signed-off-by: Marek Belisko <marek.belisko@gmail.com>	2024-04-24 14:16:22 +02:00
Marek Belisko	089c34a7bc	linux-mainline: Bump kernel to 6.6 Signed-off-by: Marek Belisko <marek.belisko@gmail.com>	2024-04-24 14:15:15 +02:00
				`@ -0,0 +1 @@`
				`/home/marek/data/projects/kas/sources/meta-sunxi/recipes-devtools/python/files/olinuxino-a20lime2`