Use mainline atf

Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>

classes/sdcard_image-sunxi.bbclass

@@ -13,11 +13,8 @@ inherit image_types
 #
 #
 
-# Use an uncompressed ext4 by default as rootfs
-SDIMG_ROOTFS_TYPE ?= "ext4"
-
 # This image depends on the rootfs image
-IMAGE_TYPEDEP:sunxi-sdimg = "${SDIMG_ROOTFS_TYPE}"
+IMAGE_TYPEDEP_sunxi-sdimg = "${SDIMG_ROOTFS_TYPE}"
 
 # Boot partition volume id
 BOOTDD_VOLUME_ID ?= "boot"
@@ -28,6 +25,8 @@ BOOT_SPACE ?= "40960"
 # First partition begin at sector 2048 : 2048*1024 = 2097152
 IMAGE_ROOTFS_ALIGNMENT = "2048"
 
+# Use an uncompressed ext4 by default as rootfs
+SDIMG_ROOTFS_TYPE ?= "ext4"
 SDIMG_ROOTFS = "${IMGDEPLOYDIR}/${IMAGE_NAME}.rootfs.${SDIMG_ROOTFS_TYPE}"
 
 do_image_sunxi_sdimg[depends] += " \
@@ -41,7 +40,7 @@ do_image_sunxi_sdimg[depends] += " \
 # SD card image name
 SDIMG = "${IMGDEPLOYDIR}/${IMAGE_NAME}.rootfs.sunxi-sdimg"
 
-IMAGE_CMD:sunxi-sdimg () {
+IMAGE_CMD_sunxi-sdimg () {
 
 	# Align partitions
 	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
@@ -95,10 +94,6 @@ IMAGE_CMD:sunxi-sdimg () {
 	then
 		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/boot.scr ::boot.scr
 	fi
-        if [ -e "${DEPLOY_DIR_IMAGE}/splash.bmp" ]
-        then
-                mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/splash.bmp ::splash.bmp
-        fi
 
 
 	# Add stamp file
@@ -121,7 +116,7 @@ IMAGE_CMD:sunxi-sdimg () {
 }
 
 # write uboot.itb for arm64 boards
-IMAGE_CMD_sunxi-sdimg:append:sun50i () {
+IMAGE_CMD_sunxi-sdimg_append_sun50i () {
 	if [ -e "${DEPLOY_DIR_IMAGE}/${UBOOT_BINARY}" ]
 	then
 		dd if=${DEPLOY_DIR_IMAGE}/${UBOOT_BINARY} of=${SDIMG} bs=1024 seek=40 conv=notrunc

conf/layer.conf

@@ -12,6 +12,6 @@ BBFILE_PRIORITY_meta-sunxi = "10"
 # cause compatibility issues with other layers
 LAYERVERSION_meta-sunxi = "1"
 
-LAYERDEPENDS_meta-sunxi = "core"
+LAYERDEPENDS_meta-sunxi = "core openembedded-layer"
 
-LAYERSERIES_COMPAT_meta-sunxi = "honister"
+LAYERSERIES_COMPAT_meta-sunxi = "zeus dunfell"

conf/machine/include/hardware/ap6212a.inc

@@ -1,5 +1,5 @@
 # Include for boards with AMPAK 6212A Wifi / Bluetooth module
 # https://linux-sunxi.org/Wifi#Ampak
 
-MACHINE_EXTRA_RRECOMMENDS:append = " kernel-module-brcmfmac"
-MACHINE_EXTRA_RDEPENDS:append = " linux-firmware-bcm43430"
+MACHINE_EXTRA_RRECOMMENDS_append = " kernel-module-brcmfmac"
+MACHINE_EXTRA_RDEPENDS_append = " linux-firmware-bcm43430"

conf/machine/include/sun4i.inc

@@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/arm/armv7a/tune-cortexa8.inc
+require conf/machine/include/tune-cortexa8.inc
 
 SOC_FAMILY = "sun4i"

conf/machine/include/sun50i.inc

@@ -1,6 +1,6 @@
 require conf/machine/include/sunxi64.inc
 
 DEFAULTTUNE ?= "cortexa53-crypto"
-require conf/machine/include/arm/armv8a/tune-cortexa53.inc
+require conf/machine/include/tune-cortexa53.inc
 
 SOC_FAMILY = "sun50i"

conf/machine/include/sun5i.inc

@@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/arm/armv8a/tune-cortexa8.inc
+require conf/machine/include/tune-cortexa8.inc
 
 SOC_FAMILY = "sun5i"

conf/machine/include/sun7i.inc

@@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/arm/armv7a/tune-cortexa7.inc
+require conf/machine/include/tune-cortexa7.inc
 
 SOC_FAMILY = "sun7i"

conf/machine/include/sun8i.inc

@@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/arm/armv7a/tune-cortexa7.inc
+require conf/machine/include/tune-cortexa7.inc
 
 SOC_FAMILY = "sun8i"

conf/machine/include/sunxi-mali-driver.inc

@@ -4,7 +4,7 @@ PREFERRED_PROVIDER_virtual/libgles1 ?= "sunxi-mali"
 PREFERRED_PROVIDER_virtual/libgles2 ?= "sunxi-mali"
 PREFERRED_PROVIDER_virtual/egl ?= "sunxi-mali"
 
-PACKAGECONFIG:remove:pn-xserver-xorg = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'glamor', '', d)}"
+PACKAGECONFIG_remove_pn-xserver-xorg = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'glamor', '', d)}"
 
 XSERVER += "sunxi-mali \
             sunxi-mali-dev"

conf/machine/include/sunxi.inc

@@ -1,8 +1,6 @@
 SOC_FAMILY ??= ""
 include conf/machine/include/soc-family.inc
 
-MACHINEOVERRIDES =. "sunxi:"
-
 # Sub-architecture support
 MACHINE_SOCARCH_SUFFIX ?= ""
 MACHINE_SOCARCH_SUFFIX_sun4i = "-sun4i"
@@ -15,14 +13,14 @@ XSERVER = "xserver-xorg \
            xf86-input-keyboard"
 
 PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
-PREFERRED_VERSION_linux-mainline ?= "5.10.%"
+PREFERRED_VERSION_linux-mainline ?= "5.4.%"
 PREFERRED_PROVIDER_u-boot ?= "u-boot"
 PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
 
 KERNEL_IMAGETYPE ?= "uImage"
 
 IMAGE_CLASSES += "sdcard_image-sunxi"
-IMAGE_FSTYPES += "ext3 tar.gz sunxi-sdimg wic.gz wic.bmap"
+IMAGE_FSTYPES += "ext3 tar.gz sunxi-sdimg"
 
 MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"
 
@@ -34,16 +32,3 @@ SPL_BINARY ?= "u-boot-sunxi-with-spl.bin"
 
 SERIAL_CONSOLE ?= "115200 ttyS0"
 MACHINE_FEATURES ?= "alsa apm keyboard rtc serial screen usbgadget usbhost vfat"
-
-# Mimic the sdcard_image-sunxi.bbclass
-# image-version-info file was also generated and installed to boot partition,
-# but it is missing here - can be added somehow (how?) if required
-SUNXI_FEX_FILE ?= " "
-SUNXI_BOOT_SPACE ?= "40"
-IMAGE_BOOT_FILES ?= "${KERNEL_IMAGETYPE} boot.scr"
-# ship fex file for sunxi kernel, devicetree file for mainline kernel
-IMAGE_BOOT_FILES += "${@bb.utils.contains('PREFERRED_PROVIDER_virtual/kernel', 'linux-sunxi', '${SUNXI_FEX_FILE}', '${KERNEL_DEVICETREE}', d)}"
-WKS_FILES ?= "sunxi-sdcard-image.wks.in"
-WKS_FILE_DEPENDS ?= "virtual/kernel u-boot"
-# in case of sunxi kernel, sunxi-board-fex must be built prior wic image assembly
-WKS_FILE_DEPENDS += " ${@bb.utils.contains('PREFERRED_PROVIDER_virtual/kernel', 'linux-sunxi', 'sunxi-board-fex', '', d)}"

conf/machine/include/sunxi64.inc

@@ -1,8 +1,6 @@
 SOC_FAMILY ??= ""
 include conf/machine/include/soc-family.inc
 
-MACHINEOVERRIDES =. "sunxi:sunxi64:"
-
 PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
 PREFERRED_PROVIDER_u-boot ?= "u-boot"
 PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
@@ -19,7 +17,7 @@ UBOOT_LOCALVERSION = "-g${@d.getVar('SRCPV', True).partition('+')[2][0:7]}"
 UBOOT_ENTRYPOINT ?= "0x40008000"
 UBOOT_LOADADDRESS ?= "0x400080OB00"
 
-#UBOOT_BINARY ?= "u-boot.itb"
+UBOOT_BINARY ?= "u-boot.itb"
 SPL_BINARY ?= "spl/sunxi-spl.bin"
 
 SERIAL_CONSOLE ?= "115200 ttyS0"

conf/machine/licheepi-zero.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: licheepi-zero
-#@DESCRIPTION: Machine configuration for the licheepi-zero, based on allwinner V3s CPU
-
-require conf/machine/include/sun8i.inc
-
-
-UBOOT_MACHINE = "LicheePi_Zero_defconfig"
-KERNEL_DEVICETREE = "sun8i-v3s-licheepi-zero.dtb"

conf/machine/marsboard-a10.conf

@@ -1,10 +0,0 @@
-#@TYPE: Machine
-#@NAME: HAOYU Electronics MarsBoard A10
-#@DESCRIPTION: Machine configuration for the HAOYU Electronics MarsBoard A10, based on Allwinner A10 CPU
-#https://linux-sunxi.org/MarsBoard_A10
-
-require conf/machine/include/sun4i.inc
-
-KERNEL_DEVICETREE = "sun4i-a10-marsboard.dtb"
-UBOOT_MACHINE = "Marsboard_A10_config"
-SUNXI_FEX_FILE = "sys_config/a10/marsboard_a10.fex"

conf/machine/nanopi-m1.conf

@@ -1,8 +0,0 @@
-#@TYPE: Machine
-#@NAME: NanoPi M1
-#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo, based on #the Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-nanopi-m1.dtb"
-UBOOT_MACHINE = "nanopi_m1_defconfig"

conf/machine/orange-pi-pc2.conf

@@ -1,8 +0,0 @@
-#@TYPE: Machine
-#@NAME: orangepi-pc2
-#@DESCRIPTION: Machine configuration for the orangepi-pc2, based on Allwinner A64 CPU
-
-require conf/machine/include/sun50i.inc
-
-KERNEL_DEVICETREE = "allwinner/sun50i-h5-orangepi-pc2.dtb"
-UBOOT_MACHINE = "orangepi_pc2_defconfig"

conf/machine/orange-pi-plus2e.conf

@@ -0,0 +1,8 @@
+#@TYPE: Machine
+#@NAME: orange-pi-plus2e
+#@DESCRIPTION: Machine configuration for the orange-pi-plus2e, base on allwinner H3 CPU
+
+require conf/machine/include/sun8i.inc
+
+KERNEL_DEVICETREE = "sun8i-h3-orangepi-plus2e.dtb"
+UBOOT_MACHINE = "orangepi_plus2e_defconfig"

conf/machine/orange-pi-r1.conf

@@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-r1
-#@DESCRIPTION: Machine configuration for the orange-pi-r1, base on allwinner H2+ CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h2-plus-orangepi-r1.dtb"
-UBOOT_MACHINE = "orangepi_r1_defconfig"
-

recipes-bsp/atf/atf-sunxi/0001-Use-same-type-as-in-declaration.patch

@@ -1,26 +0,0 @@
-From 087b9306659effac870b4794c0f775ce3d7208c5 Mon Sep 17 00:00:00 2001
-From: Marek Belisko <marek.belisko@open-nandra.com>
-Date: Wed, 13 Apr 2022 08:09:29 +0200
-Subject: [PATCH] Use same type as in declaration
-
-Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
----
- services/std_svc/psci/psci_common.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
-diff --git a/services/std_svc/psci/psci_common.c b/services/std_svc/psci/psci_common.c
-index 75f52f538..918a719f6 100644
---- a/services/std_svc/psci/psci_common.c
-+++ b/services/std_svc/psci/psci_common.c
-@@ -261,7 +261,7 @@ void psci_acquire_afflvl_locks(int start_afflvl,
-  ******************************************************************************/
- void psci_release_afflvl_locks(int start_afflvl,
- 			       int end_afflvl,
--			       aff_map_node_t *mpidr_nodes[])
-+			       mpidr_aff_map_nodes_t mpidr_nodes)
- {
- 	int level;
- 
--- 
-2.25.1
-

recipes-bsp/atf/atf-sunxi_git.bb

@@ -1,18 +1,26 @@
-DESCRIPTION = "ARM Trusted Firmware Allwinner"
+inherit deploy
+
+DESCRIPTION = "ARM Trusted Firmware"
 LICENSE = "BSD"
-LIC_FILES_CHKSUM = "file://license.md;md5=829bdeb34c1d9044f393d5a16c068371"
+LIC_FILES_CHKSUM = "file://license.rst;md5=1dd070c98a281d18d9eefd938729b031"
 
-SRC_URI = "git://github.com/apritzel/arm-trusted-firmware;nobranch=1"
-SRCREV = "aa75c8da415158a94b82a430b2b40000778e851f"
+FILESEXTRAPATHS_append := "${THISDIR}/${PN}:"
 
-SRC_URI:append = " file://0001-Use-same-type-as-in-declaration.patch"
+SRC_URI = " \
+        git://github.com/ARM-software/arm-trusted-firmware.git;nobranch=1 \
+        "
+SRCREV_sun50iw2 = "c390ecd6db5fadb054466a8d4168d9bbbff2fa95"
+SRCREV_sun50iw6 = "c390ecd6db5fadb054466a8d4168d9bbbff2fa95"
+SRCREV_sun50i = "c390ecd6db5fadb054466a8d4168d9bbbff2fa95"
 
 S = "${WORKDIR}/git"
 B = "${WORKDIR}/build"
 
-COMPATIBLE_MACHINE = "(sun50i)"
+COMPATIBLE_MACHINE = "(sun50iw2|sun50iw6|sun50i)"
 
-PLATFORM:sun50i = "sun50iw1p1"
+PLATFORM_sun50iw2 = "sun50i_a64"
+PLATFORM_sun50i = "sun50i_a64"
+PLATFORM_sun50iw6 = "sun50i_h6"
 
 LDFLAGS[unexport] = "1"
 
@@ -24,6 +32,8 @@ do_compile() {
       all
 }
 
-do_install() {
-    install -D -p -m 0644 ${B}/${PLATFORM}/release/bl31.bin ${DEPLOY_DIR_IMAGE}/bl31.bin
+do_deploy() {
+    install -D -p -m 0644 ${B}/${PLATFORM}/release/bl31.bin ${DEPLOYDIR}/bl31.bin
 }
+
+addtask deploy after do_compile

recipes-bsp/sunxi-board-fex/sunxi-board-fex.bb

@@ -9,9 +9,9 @@ PR = "r0"
 
 COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
 
-SRC_URI = "git://github.com/linux-sunxi/sunxi-boards.git;protocol=https;branch=master"
+SRC_URI = "git://github.com/linux-sunxi/sunxi-boards.git;protocol=git"
 # Increase PV with SRCREV change
-SRCREV = "af5f938ea14a3614d35ad3d9ab51a5d392117444"
+SRCREV = "496ef0fbd166cc2395daa76dd3c359357420963d"
 
 S = "${WORKDIR}/git"
 

recipes-bsp/u-boot/files/0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch

@@ -1,4 +1,4 @@
-From 6a64d90ca4d976c16a2e102dbad0848e4d29776c Mon Sep 17 00:00:00 2001
+From 6adb2ebdc4022c24497e9ee4dccab41d18e3105d Mon Sep 17 00:00:00 2001
 From: Florin Sarbu <florin@resin.io>
 Date: Wed, 12 Sep 2018 14:22:49 +0200
 Subject: [PATCH] nanopi_neo_air_defconfig: Enable eMMC support
@@ -11,11 +11,11 @@ Signed-off-by: Florin Sarbu <florin@resin.io>
  1 file changed, 1 insertion(+)
 
 diff --git a/configs/nanopi_neo_air_defconfig b/configs/nanopi_neo_air_defconfig
-index 806d95c1cc..8899cc3a15 100644
+index 5ad90ddd16..8b7a4eb45d 100644
 --- a/configs/nanopi_neo_air_defconfig
 +++ b/configs/nanopi_neo_air_defconfig
-@@ -9,3 +9,4 @@ CONFIG_DRAM_CLK=408
- CONFIG_CONSOLE_MUX=y
+@@ -15,3 +15,4 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-neo-air"
  CONFIG_USB_EHCI_HCD=y
  CONFIG_USB_OHCI_HCD=y
+ CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
 +CONFIG_MMC_SUNXI_SLOT_EXTRA=2

recipes-bsp/u-boot/files/0002-Revert-sunxi-psci-avoid-error-address-of-packed-memb.patch

@@ -0,0 +1,67 @@
+From bb6f500c10cc8f5f31245626899e0732b7b287c5 Mon Sep 17 00:00:00 2001
+From: Marek Belisko <marek.belisko@open-nandra.com>
+Date: Wed, 19 Aug 2020 13:39:49 +0200
+Subject: [PATCH] Revert "sunxi: psci: avoid error address-of-packed-member"
+
+This reverts commit 9bd34a69a453d409792e08c00953ce8862145e65.
+---
+ arch/arm/cpu/armv7/sunxi/psci.c | 16 +++++-----------
+ 1 file changed, 5 insertions(+), 11 deletions(-)
+
+diff --git a/arch/arm/cpu/armv7/sunxi/psci.c b/arch/arm/cpu/armv7/sunxi/psci.c
+index 5b68900..2c5d99e 100644
+--- a/arch/arm/cpu/armv7/sunxi/psci.c
++++ b/arch/arm/cpu/armv7/sunxi/psci.c
+@@ -75,7 +75,7 @@ static void __secure __mdelay(u32 ms)
+ 	isb();
+ }
+ 
+-static void __secure clamp_release(void __maybe_unused *clamp)
++static void __secure clamp_release(u32 __maybe_unused *clamp)
+ {
+ #if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN7I) || \
+ 	defined(CONFIG_MACH_SUN8I_H3) || \
+@@ -90,7 +90,7 @@ static void __secure clamp_release(void __maybe_unused *clamp)
+ #endif
+ }
+ 
+-static void __secure clamp_set(void __maybe_unused *clamp)
++static void __secure clamp_set(u32 __maybe_unused *clamp)
+ {
+ #if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN7I) || \
+ 	defined(CONFIG_MACH_SUN8I_H3) || \
+@@ -99,28 +99,22 @@ static void __secure clamp_set(void __maybe_unused *clamp)
+ #endif
+ }
+ 
+-static void __secure sunxi_power_switch(void *clamp, void *pwroff_ptr, bool on,
++static void __secure sunxi_power_switch(u32 *clamp, u32 *pwroff, bool on,
+ 					int cpu)
+ {
+-	u32 pwroff;
+-
+-	memcpy(&pwroff, pwroff_ptr, sizeof(u32));
+-
+ 	if (on) {
+ 		/* Release power clamp */
+ 		clamp_release(clamp);
+ 
+ 		/* Clear power gating */
+-		clrbits_le32(&pwroff, BIT(cpu));
++		clrbits_le32(pwroff, BIT(cpu));
+ 	} else {
+ 		/* Set power gating */
+-		setbits_le32(&pwroff, BIT(cpu));
++		setbits_le32(pwroff, BIT(cpu));
+ 
+ 		/* Activate power clamp */
+ 		clamp_set(clamp);
+ 	}
+-
+-	memcpy(pwroff_ptr, &pwroff, sizeof(u32));
+ }
+ 
+ #ifdef CONFIG_MACH_SUN8I_R40
+-- 
+2.7.4
+

recipes-bsp/u-boot/u-boot-sunxi.bb

@@ -19,7 +19,7 @@ UBOOT_MACHINE_olinuxino-a10s = "A10s-OLinuXino-Micro_config"
 UBOOT_MACHINE_meleg = "Mele_A1000G_config"
 
 SRC_URI = " \
-	git://github.com/linux-sunxi/u-boot-sunxi.git;protocol=https;branch=sunxi \
+	git://github.com/linux-sunxi/u-boot-sunxi.git;protocol=git;branch=sunxi \
 	file://0001-gcc5-fixes.patch \
 	file://0002-gcc6-fixes.patch \
 	file://0003-No-gcc-version-specific-includes.patch \

recipes-bsp/u-boot/u-boot_%.bbappend

@@ -1,29 +1,31 @@
-FILESEXTRAPATHS:prepend:sunxi := "${THISDIR}/files:"
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"
 
-DEPENDS:append:sunxi = " bc-native dtc-native swig-native python3-native flex-native bison-native "
-DEPENDS:append:sun50i = " atf-sunxi "
+DEPENDS += " bc-native dtc-native swig-native python3-native flex-native bison-native "
+DEPENDS_append_sun50i = " atf-sunxi "
 
-COMPATIBLE_MACHINE:sunxi = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
 
-DEFAULT_PREFERENCE:sun4i = "1"
-DEFAULT_PREFERENCE:sun5i = "1"
-DEFAULT_PREFERENCE:sun7i = "1"
-DEFAULT_PREFERENCE:sun8i = "1"
-DEFAULT_PREFERENCE:sun50i = "1"
+DEFAULT_PREFERENCE_sun4i="1"
+DEFAULT_PREFERENCE_sun5i="1"
+DEFAULT_PREFERENCE_sun7i="1"
+DEFAULT_PREFERENCE_sun8i="1"
+DEFAULT_PREFERENCE_sun50i="1"
 
-SRC_URI:append:sunxi = " \
+SRC_URI += " \
            file://0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch \
            file://boot.cmd \
            "
+# fix booting issue on orange pi zero
+SRC_URI_append_orange-pi-zero = " file://0002-Revert-sunxi-psci-avoid-error-address-of-packed-memb.patch"
 
-UBOOT_ENV_SUFFIX:sunxi = "scr"
-UBOOT_ENV:sunxi = "boot"
+UBOOT_ENV_SUFFIX = "scr"
+UBOOT_ENV = "boot"
 
-EXTRA_OEMAKE:append:sunxi = ' HOSTLDSHARED="${BUILD_CC} -shared ${BUILD_LDFLAGS} ${BUILD_CFLAGS}" '
-EXTRA_OEMAKE:append:sun50i = " BL31=${DEPLOY_DIR_IMAGE}/bl31.bin "
+EXTRA_OEMAKE += ' HOSTLDSHARED="${BUILD_CC} -shared ${BUILD_LDFLAGS} ${BUILD_CFLAGS}" '
+EXTRA_OEMAKE_append_sun50i = " BL31=${DEPLOY_DIR_IMAGE}/bl31.bin "
 
 do_compile_sun50i[depends] += "atf-sunxi:do_deploy"
 
-do_compile:append:sunxi() {
+do_compile_append() {
     ${B}/tools/mkimage -C none -A arm -T script -d ${WORKDIR}/boot.cmd ${WORKDIR}/${UBOOT_ENV_BINARY}
 }

recipes-devtools/python/pya20_0.2.12.bb

@@ -15,7 +15,7 @@ S = "${WORKDIR}/pyA20-${PV}"
 
 inherit distutils3
 
-do_compile:prepend() { 
+do_compile_prepend() { 
 cp ${WORKDIR}/mapping.h ${S}/pyA20/gpio/mapping.h
 }
 

recipes-graphics/libgles/sunxi-mali_git.bb

@@ -21,7 +21,7 @@ python __anonymous() {
         raise bb.parse.SkipPackage("%s-%s ONLY supports hardfp mode for now" % (pkgn, pkgv))
 }
 
-SRCREV = "d343311efc8db166d8371b28494f0f27b6a58724"
+SRCREV_pn-${PN} = "d343311efc8db166d8371b28494f0f27b6a58724"
 SRC_URI = "gitsm://github.com/linux-sunxi/sunxi-mali.git \
            file://0001-Add-EGLSyncKHR-EGLTimeKHR-and-GLChar-definition.patch \
            file://0002-Add-missing-GLchar-definition.patch \
@@ -92,13 +92,13 @@ do_install() {
 # Packages like xf86-video-fbturbo dlopen() libUMP.so, so we do need to ship the .so files in ${PN}
 PACKAGES =+ "${PN}-test"
 
-RPROVIDES:${PN} += "libGLESv2.so libEGL.so libGLESv2.so libGLESv1_CM.so libMali.so"
-RDEPENDS:${PN}-test = "${PN}"
+RPROVIDES_${PN} += "libGLESv2.so libEGL.so libGLESv2.so libGLESv1_CM.so libMali.so"
+RDEPENDS_${PN}-test = "${PN}"
 
-FILES:${PN} += "${libdir}/lib*.so"
-FILES:${PN}-dev = "${includedir} ${libdir}/pkgconfig/*"
-FILES:${PN}-test = "${bindir}/sunximali-test"
+FILES_${PN} += "${libdir}/lib*.so"
+FILES_${PN}-dev = "${includedir} ${libdir}/pkgconfig/*"
+FILES_${PN}-test = "${bindir}/sunximali-test"
 
 # These are closed binaries generated elsewhere so don't check ldflags & text relocations
-INSANE_SKIP:${PN} = "dev-so ldflags textrel"
-INSANE_SKIP:${PN}-test = "dev-so ldflags textrel"
+INSANE_SKIP_${PN} = "dev-so ldflags textrel"
+INSANE_SKIP_${PN}-test = "dev-so ldflags textrel"

recipes-graphics/libump/libump_git.bb

@@ -6,9 +6,9 @@ LIC_FILES_CHKSUM = "file://debian/copyright;md5=edf7fb6071cae7ec80d537a05ee17198
 inherit autotools
 
 PV = "r4p0-00rel0+git${SRCPV}"
-SRCREV = "ec0680628744f30b8fac35e41a7bd8e23e59c39f"
+SRCREV_pn-${PN} = "ec0680628744f30b8fac35e41a7bd8e23e59c39f"
 
-SRC_URI = "git://github.com/linux-sunxi/libump.git;protocol=https;branch=master"
+SRC_URI = "git://github.com/linux-sunxi/libump.git"
 
 S = "${WORKDIR}/git"
 

recipes-graphics/mesa/mesa_%.bbappend

@@ -1,5 +1,5 @@
 # Enable lima and panfrost Mesa drivers
-PACKAGECONFIG:append:use-mailine-graphics = " lima panfrost"
+PACKAGECONFIG_append_use-mailine-graphics = " lima panfrost"
 # Enable KMS renderonly Mesa support
 # See https://cgit.freedesktop.org/mesa/mesa/commit/?id=2b780fe89300199f2334539aa1678e9b68f0434f
-GALLIUMDRIVERS:append:use-mailine-graphics = ",kmsro"
+GALLIUMDRIVERS_append_use-mailine-graphics = ",kmsro"

recipes-graphics/tslib/tslib_1.1.bbappend.disabled

@@ -1,4 +1,4 @@
-FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
 
 SRC_URI += "file://tslib.patch"
 

recipes-graphics/xorg-xserver/libdri2_git.bb

@@ -9,7 +9,7 @@ PE = "1"
 PV = "1.0.0+git${SRCPV}"
 SRC_URI = "git://github.com/robclark/libdri2.git;protocol=http;branch=master"
 
-SRCREV = "4f1eef3183df2b270c3d5cbef07343ee5127a6a4"
+SRCREV_pn-${PN} = "4f1eef3183df2b270c3d5cbef07343ee5127a6a4"
 
 S = "${WORKDIR}/git"
 

recipes-graphics/xorg-xserver/xf86-video-fbturbo_git.bb

@@ -9,7 +9,7 @@ DEPENDS += "sunxi-mali libump xorgproto"
 
 PE = "3"
 PV = "0.5.1+git${SRCPV}"
-SRCREV = "e094e3c8f9004ca3347694bd05b99d136e8621b9"
+SRCREV_pn-${PN} = "e094e3c8f9004ca3347694bd05b99d136e8621b9"
 
 SRC_URI = "git://github.com/ssvb/xf86-video-fbturbo.git;protocol=http;branch=master \
            file://20-fbturbo.conf"
@@ -18,9 +18,9 @@ S = "${WORKDIR}/git"
 
 CFLAGS += " -I${STAGING_INCDIR}/xorg "
 
-do_install:append() {
+do_install_append() {
     install -d ${D}${datadir}/X11/xorg.conf.d
     install -m 0644 ${WORKDIR}/20-fbturbo.conf ${D}${datadir}/X11/xorg.conf.d
 }
 
-FILES:${PN} += "${datadir}/X11/xorg.conf.d/20-fbturbo.conf"
+FILES_${PN} += "${datadir}/X11/xorg.conf.d/20-fbturbo.conf"

recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend

@@ -1 +1 @@
-FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"

recipes-kernel/linux-firmware/linux-firmware_%.bbappend

@@ -6,7 +6,7 @@
 # WARNING: The following commit is required for NVRAM files to be included in
 # linux-firmware-bcm43430 package:
 # http://git.openembedded.org/openembedded-core/commit/?id=dde0f79f32fa6bab045ef60199903f74c4cc3393
-do_install:append() {
+do_install_append() {
 	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2.txt
 	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2-h3.txt
 	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt

recipes-kernel/linux/linux-mainline.inc

@@ -21,12 +21,12 @@ KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
 S = "${WORKDIR}/linux-${PV}"
 
 SRC_URI = "https://www.kernel.org/pub/linux/kernel/v5.x/linux-${PV}.tar.xz \
+	file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
 	file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
 	file://defconfig \
 "
 
-SRC_URI:append:use-mailine-graphics = " file://drm.cfg"
-SRC_URI:append:bananapi = " file://axp20x.cfg"
-SRC_URI:append:cubietruck = " file://axp20x.cfg"
+SRC_URI_append_use-mailine-graphics = " file://drm.cfg"
+SRC_URI_append_bananapi = " file://axp20x.cfg"
 
-FILES_${KERNEL_PACKAGE_NAME}-base:append = " ${nonarch_base_libdir}/modules/${KERNEL_VERSION}/modules.builtin.modinfo"
+FILES_${KERNEL_PACKAGE_NAME}-base_append = " ${nonarch_base_libdir}/modules/${KERNEL_VERSION}/modules.builtin.modinfo"

recipes-kernel/linux/linux-mainline/0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch

@@ -0,0 +1,80 @@
+From 4ca766a768e783ee5198f1935b7f46a5df9b4a35 Mon Sep 17 00:00:00 2001
+From: Jelle van der Waa <jelle@vdwaa.nl>
+Date: Tue, 23 Jan 2018 15:58:44 -0800
+Subject: [PATCH] ARM: dts: nanopi-neo-air: Add WiFi / eMMC
+
+Enable the WiFi (AP6212) chip and eMMC support for the NanoPi NEO Air.
+
+This patch was originally submitted by Jelle van der Waa. Martin Kelly
+modified it to compile on the latest kernel, fixed up some review
+comments from Maxime Ripard, and re-tested the patch.
+
+The patch has been reworked to add back eMMC support which has been left
+out at the last backport.
+
+Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
+Cc: linux-sunxi@googlegroups.com
+Cc: devicetree@vger.kernel.org
+Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
+Signed-off-by: Martin Kelly <mkelly@xevo.com>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+Signed-off-by: Florin Sarbu <florin@resin.io>
+---
+ arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts | 34 +++++++++++++++++++++++++++
+ 1 file changed, 34 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+index 03ff6f8..a9331fe 100644
+--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
++++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+@@ -72,6 +72,11 @@
+ 			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+ 		};
+ 	};
++
++	wifi_pwrseq: wifi_pwrseq {
++		compatible = "mmc-pwrseq-simple";
++		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
++	};
+ };
+ 
+ &mmc0 {
+@@ -84,6 +89,35 @@
+ 	status = "okay";
+ };
+ 
++&mmc1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc1_pins_a>;
++	vmmc-supply = <&reg_vcc3v3>;
++	vqmmc-supply = <&reg_vcc3v3>;
++	mmc-pwrseq = <&wifi_pwrseq>;
++	bus-width = <4>;
++	non-removable;
++	status = "okay";
++
++	brcmf: bcrmf@1 {
++		reg = <1>;
++		compatible = "brcm,bcm4329-fmac";
++		interrupt-parent = <&pio>;
++		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
++		interrupt-names = "host-wake";
++	};
++};
++
++&mmc2 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&mmc2_8bit_pins>;
++	vmmc-supply = <&reg_vcc3v3>;
++	vqmmc-supply = <&reg_vcc3v3>;
++	bus-width = <8>;
++	non-removable;
++	status = "okay";
++};
++
+ &uart0 {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&uart0_pins_a>;
+-- 
+2.11.0
+

recipes-kernel/linux/linux-mainline/aarch64/defconfig

@@ -339,7 +339,6 @@ CONFIG_MFD_MAX77620=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_RK808=y
 CONFIG_MFD_SEC_CORE=y
-CONFIG_REGULATOR=y
 CONFIG_REGULATOR_AXP20X=y
 CONFIG_REGULATOR_FAN53555=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y

recipes-kernel/linux/linux-mainline/drm.cfg

@@ -2,7 +2,6 @@ CONFIG_DRM=y
 CONFIG_DRM_SUN4I=y
 CONFIG_DRM_SUN8I_DW_HDMI=y
 CONFIG_DRM_SUN8I_MIXER=y
-CONFIG_IOMMU_SUPPORT=y
 CONFIG_DRM_LIMA=y
 CONFIG_DRM_PANFROST=y
 CONFIG_CMA=y

recipes-kernel/linux/linux-mainline_4.19.186.bb

@@ -0,0 +1,32 @@
+SECTION = "kernel"
+DESCRIPTION = "Mainline Longterm Linux kernel"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
+
+inherit kernel
+
+require linux.inc
+
+# Since we're not using git, this doesn't make a difference, but we need to fill
+# in something or kernel-yocto.bbclass will fail.
+KBRANCH ?= "master"
+
+# Pull in the devicetree files into the rootfs
+RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"
+
+KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
+
+S = "${WORKDIR}/linux-${PV}"
+
+SRC_URI[md5sum] = "dfb4db3d95bdcd8114281e32eb0be5cd"
+SRC_URI[sha256sum] = "d8c5d7844214510e85ceb9f5236f27f63fc03535a143f3aaa0c1677a8f92e631"
+
+SRC_URI = "https://www.kernel.org/pub/linux/kernel/v4.x/linux-${PV}.tar.xz \
+        file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
+        file://defconfig \
+        "
+
+SRC_URI_append_orange-pi-zero += "\
+	file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
+	"

recipes-kernel/linux/linux-mainline_5.10.2.bb

@@ -1,8 +0,0 @@
-require linux-mainline.inc
-
-DESCRIPTION = "Mainline Longterm Linux kernel"
-
-LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46"
-
-SRC_URI[md5sum] = "0751179f60de73eb2cd93f161fa52fcf"
-SRC_URI[sha256sum] = "3b84e13abae26af17ebccc4d7212f5843a991127a73a320848d5c6942ef781a2"

recipes-kernel/linux/linux-mainline_5.4.111.bb

@@ -0,0 +1,6 @@
+require linux-mainline.inc
+
+DESCRIPTION = "Mainline Longterm Linux kernel"
+
+SRC_URI[md5sum] = "a3820e9aa56af51c0331b7f427e6f71b"
+SRC_URI[sha256sum] = "21626132658dc34cb41b7aa7b80ecf83751890a71ac1a63d77aea9d488271a03"

recipes-kernel/linux/linux-mainline_5.4.69.bb

@@ -1,8 +0,0 @@
-require linux-mainline.inc
-
-DESCRIPTION = "Mainline Longterm Linux kernel"
-
-LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
-
-SRC_URI[md5sum] = "98c8187b801f006ba203db0669e307a5"
-SRC_URI[sha256sum] = "a8b31d716b397303a183e42ad525ff2871024a43e3ea530d0fdf73b7f9d27da7"

recipes-kernel/linux/linux-mainline_5.5.3.bb

@@ -0,0 +1,6 @@
+require linux-mainline.inc
+
+DESCRIPTION = "Mainline Stable Linux kernel"
+
+SRC_URI[md5sum] = "3ea50025d8c679a327cf2fc225d81a46"
+SRC_URI[sha256sum] = "2bef3edcf44c746383045f4a809b2013e18c52319c827875ed8e89138951cab2"

recipes-kernel/linux/linux-sunxi_3.4.bb

@@ -3,15 +3,15 @@ require linux.inc
 DESCRIPTION = "Linux kernel for Allwinner a10/a20 processors"
 
 COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
-RDEPENDS:${PN} += "sunxi-board-fex"
+RDEPENDS_${PN} += "sunxi-board-fex"
 
 PV = "3.4.104"
 PR = "r1"
-SRCREV = "d47d367036be38c5180632ec8a3ad169a4593a88"
+SRCREV_pn-${PN} = "d47d367036be38c5180632ec8a3ad169a4593a88"
 
-MACHINE_KERNEL_PR:append = "a"
+MACHINE_KERNEL_PR_append = "a"
 
-SRC_URI += "git://github.com/linux-sunxi/linux-sunxi.git;branch=sunxi-3.4;protocol=https \
+SRC_URI += "git://github.com/linux-sunxi/linux-sunxi.git;branch=sunxi-3.4;protocol=git \
         file://0001-compiler-gcc-integrate-the-various-compiler-gcc-345-.patch \
         file://0002-use-static-inline-in-ARM-ftrace.patch \
         file://0003-gcc5-fixes.patch \
@@ -26,7 +26,7 @@ S = "${WORKDIR}/git"
 #fix QA issue "Files/directories were installed but not shipped: /usr/src/debug"
 INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
 
-do_configure:prepend() {
+do_configure_prepend() {
     #fix arch QA issues ("Architecture did not match")
     rm -f ${S}/drivers/net/wireless/rtxx7x/tools/bin2h
     rm -f ${S}/modules/wifi/ar6302/AR6K_SDK_ISC.build_3.1_RC.329/host/lib/wac/wac

recipes-kernel/linux/linux.inc

@@ -39,7 +39,7 @@ do_kernel_configme[depends] += "virtual/${TARGET_PREFIX}binutils:do_populate_sys
 do_kernel_configme[depends] += "virtual/${TARGET_PREFIX}gcc:do_populate_sysroot"
 do_kernel_configme[depends] += "bc-native:do_populate_sysroot bison-native:do_populate_sysroot"
 
-do_configure:prepend() {
+do_configure_prepend() {
     CONF_SED_SCRIPT=""
 
     #
@@ -118,9 +118,15 @@ do_configure:prepend() {
     yes '' | oe_runmake -C ${S} O=${B} oldconfig
 }
 
-do_configure:append() {
+do_configure_append() {
     if test -e scripts/Makefile.fwinst ; then
         sed -i -e "s:-m0644:-m 0644:g" scripts/Makefile.fwinst
     fi
 }
 
+do_install_append() {
+    oe_runmake headers_install INSTALL_HDR_PATH=${D}${exec_prefix}/src/linux-${KERNEL_VERSION} ARCH=$ARCH
+}
+
+PACKAGES =+ "kernel-headers"
+FILES_kernel-headers = "${exec_prefix}/src/linux*"

recipes-kernel/xradio-firmware/xradio-firmware.bb

@@ -20,6 +20,6 @@ do_install() {
     install -m 0644 ${S}/xr819/fw_xr819.bin ${D}${base_libdir}/firmware/xr819/
 }
 
-FILES:${PN} = "${base_libdir}/*"
+FILES_${PN} = "${base_libdir}/*"
 
 PACKAGES = "${PN}"

recipes-kernel/xradio/xradio.bb

@@ -7,7 +7,7 @@ inherit module
 PV = "0.1"
 PR = "r0"
 
-RDEPENDS:${PN} += "xradio-firmware"
+RDEPENDS_${PN} += "xradio-firmware"
 
 COMPATIBLE_MACHINE = "orange-pi-zero"
 

recipes-multimedia/gstreamer/gst-plugin-cedar_git.bb

@@ -10,14 +10,14 @@ inherit autotools pkgconfig
 # 0.10.1 Initial Import
 SRCREV = "908987a74d341be1376895023698667892fe5569"
 
-SRC_URI = "git://github.com/ebutera/gst-plugin-cedar.git;protocol=https;branch=master"
+SRC_URI = "git://github.com/ebutera/gst-plugin-cedar.git"
 
 PV = "0.10.1+git${SRCPV}"
 PR = "r1"
 
 S = "${WORKDIR}/git"
 
-FILES:${PN} += "${libdir}/gstreamer-0.10/*.so"
-FILES:${PN}-dbg += "${libdir}/gstreamer-0.10/.debug"
-FILES:${PN}-dev += "${libdir}/gstreamer-0.10/*.la"
-FILES:${PN}-staticdev += "${libdir}/gstreamer-0.10/*.a"
+FILES_${PN} += "${libdir}/gstreamer-0.10/*.so"
+FILES_${PN}-dbg += "${libdir}/gstreamer-0.10/.debug"
+FILES_${PN}-dev += "${libdir}/gstreamer-0.10/*.la"
+FILES_${PN}-staticdev += "${libdir}/gstreamer-0.10/*.a"

recipes-support/sunxi-tools/sunxi-tools_git.bb

@@ -7,7 +7,7 @@ PR = "r0"
 
 DEPENDS += "libusb"
 
-SRC_URI = "git://github.com/linux-sunxi/sunxi-tools;protocol=https;branch=master"
+SRC_URI = "git://github.com/linux-sunxi/sunxi-tools;protocol=git"
 SRCREV = "9a3d62aa0c820b3dd42ba3409b2043f4143683cd"
 
 inherit pkgconfig
@@ -16,7 +16,7 @@ S = "${WORKDIR}/git"
 
 BBCLASSEXTEND = "native nativesdk"
 
-FILES:${PN} = "${bindir}/*"
+FILES_${PN} = "${bindir}/*"
 
 CFLAGS = "-std=c99 -D_POSIX_C_SOURCE=200112L -I./include"
 CFLAGS_class-native = "-std=c99 -D_POSIX_C_SOURCE=200112L -I./include"

wic/sunxi-sdcard-image.wks.in

@@ -1,18 +0,0 @@
-# short-description: Create SD card image with a boot partition
-# long-description:
-# Create an image that can be written onto a SD card using dd for use
-# with Allwinner arm (32-bit) SoC family
-#
-# The disk layout used is:
-#  - --------------------------- -------------- --------------
-# | | u-boot-sunxi-with-spl.bin |     boot     |    rootfs    |
-#  - --------------------------- -------------- --------------
-# ^ ^                           ^              ^              ^
-# | |                           |              |              |
-# 0 |                         2MiB  ${SUNXI_BOOT_SPACE}MiB  ${SUNXI_BOOT_SPACE}MiB + rootfs + IMAGE_EXTRA_SPACE
-#   8KiB 
-#
-
-part u-boot --source rawcopy --sourceparams="file=${SPL_BINARY}" --ondisk mmcblk0 --no-table --align 8
-part /boot --source bootimg-partition --ondisk mmcblk0 --fstype=vfat --label boot --active --align 2048 --fixed-size ${SUNXI_BOOT_SPACE}
-part /     --source rootfs --ondisk mmcblk0 --fstype=ext4 --align 2048