Merge pull request #279 from kedder/zeus

Backport linux-sunxi compilation fixes to Zeus
Mention that devicetree needs to be disabled for old kernel
2025-07-16 13:59:46 +02:00 · 2020-01-26 19:35:19 +01:00 · 2020-01-26 12:11:20 +02:00 · 2020-01-26 12:11:20 +02:00 · 2020-01-26 12:11:19 +02:00 · 2020-01-26 12:11:19 +02:00
38 changed files with 223 additions and 266 deletions
--- a/README.md
+++ b/README.md
@ -19,12 +19,8 @@ Maintainers:
 Kernel / U-Boot Version
 ===========
 Most Allwinner devices and hardware are supported in mainline kernel and U-Boot, so this layer builds mainline by default.
-
-Legacy sunxi Kernel / U-Boot
-----------
-
 There is a custom U-Boot and Kernel version for sunxi devices which includes some special drivers not mainlined.
-These versions are rather old (3.4 for kernel and 2014.04 for U-Boot), but may support more functions and devices than current mainline.
+These versions are rather old (3.4 for kernel and 2014.04 for U-Boot), but may support more functions and devices than current mainline

 If you want to switch back to sunxi versions for some reasons (no device tree available, unsupported hardware), either:
 - change the file conf/machine/include/sunxi.inc to include the following block
@ -39,16 +35,9 @@ If you already have built the mainline versions it might be necessary to reset t

 	bitbake -c clean virtual/kernel virtual/bootloader

-Mainline Kernel / U-Boot
-----------
-
-For mainline kernel we have now support for latest LTS and stable.
+For mainline kernel we have now support for latest LTS, stable and bleeding edge (latest possible rc).
 By default we use latest LTS. If you would like to change version please update ```PREFERRED_VERSION_linux-mainline``` in:
-* [conf/machine/include/sunxi.inc](https://github.com/linux-sunxi/meta-sunxi/blob/fa0846c0eb23e3424b89acb4d5a327e921f73497/conf/machine/include/sunxi.inc#L16)
-
-When using mainline kernel ≥ 5.2 it is now possible to use the mainline graphics drivers *lima* and *panfrost*, instead of the *mali* driver provided by ARM. To enable open source mainline graphics support add the following line in your `local.conf`:
-
-    MACHINEOVERRIDES .= ":use-mailine-graphics"
+* [conf/machine/include/sunxi.inc](https://github.com/linux-sunxi/meta-sunxi/blob/4921234ed77f9df77c65c88637ce50468f65bde7/conf/machine/include/sunxi.inc#L16)

 Performance
 ===========
--- a/classes/sdcard_image-sunxi.bbclass
+++ b/classes/sdcard_image-sunxi.bbclass
@ -17,7 +17,7 @@ inherit image_types
 IMAGE_TYPEDEP_sunxi-sdimg = "${SDIMG_ROOTFS_TYPE}"

 # Boot partition volume id
-BOOTDD_VOLUME_ID ?= "boot"
+BOOTDD_VOLUME_ID ?= "${MACHINE}"

 # Boot partition size [in KiB]
 BOOT_SPACE ?= "40960"
@ -94,10 +94,6 @@ IMAGE_CMD_sunxi-sdimg () {
 	then
 		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/boot.scr ::boot.scr
 	fi
-        if [ -e "${DEPLOY_DIR_IMAGE}/splash.bmp" ]
-        then
-                mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/splash.bmp ::splash.bmp
-        fi


 	# Add stamp file
--- a/conf/layer.conf
+++ b/conf/layer.conf
@ -14,4 +14,4 @@ LAYERVERSION_meta-sunxi = "1"

 LAYERDEPENDS_meta-sunxi = "core openembedded-layer"

-LAYERSERIES_COMPAT_meta-sunxi = "zeus dunfell gatesgarth hardknott"
+LAYERSERIES_COMPAT_meta-sunxi = "zeus"
--- a/conf/machine/bananapi-m2m.conf
+++ b/conf/machine/bananapi-m2m.conf
@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: bananapi-m2m
-#@DESCRIPTION: Machine configuration for the Banana Pi M2M, base on Allwinner H8 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-r16-bananapi-m2m.dtb"
-UBOOT_MACHINE = "Bananapi_m2m_defconfig"
-
--- a/conf/machine/bananapi-m2plus.conf
+++ b/conf/machine/bananapi-m2plus.conf
@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: bananapi-m2plus
-#@DESCRIPTION: Machine configuration for the Banana Pi M2+, base on Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-bananapi-m2-plus.dtb"
-UBOOT_MACHINE = "bananapi_m2_plus_h3_defconfig"
-
--- a/conf/machine/bananapi-m64.conf
+++ b/conf/machine/bananapi-m64.conf
@ -1,8 +0,0 @@
-#@TYPE: Machine
-#@NAME: pine64-plus
-#@DESCRIPTION: Machine configuration for the pine64-plus, based on Allwinner A64 CPU
-
-require conf/machine/include/sun50i.inc
-
-KERNEL_DEVICETREE = "allwinner/sun50i-a64-bananapi-m64.dtb"
-UBOOT_MACHINE = "bananapi_m64_defconfig"
--- a/conf/machine/include/hardware/ap6212a.inc
+++ b/conf/machine/include/hardware/ap6212a.inc
@ -1,5 +0,0 @@
-# Include for boards with AMPAK 6212A Wifi / Bluetooth module
-# https://linux-sunxi.org/Wifi#Ampak
-
-MACHINE_EXTRA_RRECOMMENDS_append = " kernel-module-brcmfmac"
-MACHINE_EXTRA_RDEPENDS_append = " linux-firmware-bcm43430"
--- a/conf/machine/include/sunxi-mali-driver.inc
+++ b/conf/machine/include/sunxi-mali-driver.inc
@ -1,15 +0,0 @@
-PREFERRED_PROVIDER_virtual/mesa ?= "mesa-gl"
-PREFERRED_PROVIDER_virtual/libgl ?= "mesa-gl"
-PREFERRED_PROVIDER_virtual/libgles1 ?= "sunxi-mali"
-PREFERRED_PROVIDER_virtual/libgles2 ?= "sunxi-mali"
-PREFERRED_PROVIDER_virtual/egl ?= "sunxi-mali"
-
-PACKAGECONFIG_remove_pn-xserver-xorg = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'glamor', '', d)}"
-
-XSERVER += "sunxi-mali \
-            sunxi-mali-dev"
-
-MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "\
- kernel-module-mali \
- kernel-module-mali-drm \
-  "
--- a/conf/machine/include/sunxi-mali.inc
+++ b/conf/machine/include/sunxi-mali.inc
@ -1,5 +1,15 @@
-# The "sunxi-mailine-graphics-drivers.inc" doesn't exist, but it can be created
-# in the future if needed.  Using include directive ensures build doesn't fail
-# if .inc file doesn't exist:
-# https://www.yoctoproject.org/pipermail/yocto/2019-August/046484.html
-include ${@'sunxi-mali-driver.inc' if 'use-mailine-graphics' not in d.getVar("MACHINEOVERRIDES").split(":") else 'sunxi-mailine-graphics-drivers.inc' }
+PREFERRED_PROVIDER_virtual/mesa ?= "mesa-gl"
+PREFERRED_PROVIDER_virtual/libgl ?= "mesa-gl"
+PREFERRED_PROVIDER_virtual/libgles1 ?= "sunxi-mali"
+PREFERRED_PROVIDER_virtual/libgles2 ?= "sunxi-mali"
+PREFERRED_PROVIDER_virtual/egl ?= "sunxi-mali"
+
+PACKAGECONFIG_remove_pn-xserver-xorg = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'glamor', '', d)}"
+
+XSERVER += "sunxi-mali \
+            sunxi-mali-dev"
+
+MACHINE_ESSENTIAL_EXTRA_RRECOMMENDS += "\
+ kernel-module-mali \
+ kernel-module-mali-drm \
+  "
--- a/conf/machine/include/sunxi.inc
+++ b/conf/machine/include/sunxi.inc
@ -1,8 +1,6 @@
 SOC_FAMILY ??= ""
 include conf/machine/include/soc-family.inc

-MACHINEOVERRIDES =. "sunxi:"
-
 # Sub-architecture support
 MACHINE_SOCARCH_SUFFIX ?= ""
 MACHINE_SOCARCH_SUFFIX_sun4i = "-sun4i"
@ -15,14 +13,14 @@ XSERVER = "xserver-xorg \
           xf86-input-keyboard"

 PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
-PREFERRED_VERSION_linux-mainline ?= "5.4.%"
+PREFERRED_VERSION_linux-mainline ?= "4.19%"
 PREFERRED_PROVIDER_u-boot ?= "u-boot"
 PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"

 KERNEL_IMAGETYPE ?= "uImage"

 IMAGE_CLASSES += "sdcard_image-sunxi"
-IMAGE_FSTYPES += "ext3 tar.gz sunxi-sdimg wic.gz wic.bmap"
+IMAGE_FSTYPES += "ext3 tar.gz sunxi-sdimg"

 MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"

@ -34,16 +32,3 @@ SPL_BINARY ?= "u-boot-sunxi-with-spl.bin"

 SERIAL_CONSOLE ?= "115200 ttyS0"
 MACHINE_FEATURES ?= "alsa apm keyboard rtc serial screen usbgadget usbhost vfat"
-
-# Mimic the sdcard_image-sunxi.bbclass
-# image-version-info file was also generated and installed to boot partition,
-# but it is missing here - can be added somehow (how?) if required
-SUNXI_FEX_FILE ?= " "
-SUNXI_BOOT_SPACE ?= "40"
-IMAGE_BOOT_FILES ?= "${KERNEL_IMAGETYPE} boot.scr"
-# ship fex file for sunxi kernel, devicetree file for mainline kernel
-IMAGE_BOOT_FILES += "${@bb.utils.contains('PREFERRED_PROVIDER_virtual/kernel', 'linux-sunxi', '${SUNXI_FEX_FILE}', '${KERNEL_DEVICETREE}', d)}"
-WKS_FILES ?= "sunxi-sdcard-image.wks.in"
-WKS_FILE_DEPENDS ?= "virtual/kernel u-boot"
-# in case of sunxi kernel, sunxi-board-fex must be built prior wic image assembly
-WKS_FILE_DEPENDS += " ${@bb.utils.contains('PREFERRED_PROVIDER_virtual/kernel', 'linux-sunxi', 'sunxi-board-fex', '', d)}"
--- a/conf/machine/include/sunxi64.inc
+++ b/conf/machine/include/sunxi64.inc
@ -1,8 +1,6 @@
 SOC_FAMILY ??= ""
 include conf/machine/include/soc-family.inc

-MACHINEOVERRIDES =. "sunxi:sunxi64:"
-
 PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
 PREFERRED_PROVIDER_u-boot ?= "u-boot"
 PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"
--- a/conf/machine/licheepi-zero.conf
+++ b/conf/machine/licheepi-zero.conf
@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: licheepi-zero
-#@DESCRIPTION: Machine configuration for the licheepi-zero, based on allwinner V3s CPU
-
-require conf/machine/include/sun8i.inc
-
-
-UBOOT_MACHINE = "LicheePi_Zero_defconfig"
-KERNEL_DEVICETREE = "sun8i-v3s-licheepi-zero.dtb"
--- a/conf/machine/marsboard-a10.conf
+++ b/conf/machine/marsboard-a10.conf
@ -1,10 +0,0 @@
-#@TYPE: Machine
-#@NAME: HAOYU Electronics MarsBoard A10
-#@DESCRIPTION: Machine configuration for the HAOYU Electronics MarsBoard A10, based on Allwinner A10 CPU
-#https://linux-sunxi.org/MarsBoard_A10
-
-require conf/machine/include/sun4i.inc
-
-KERNEL_DEVICETREE = "sun4i-a10-marsboard.dtb"
-UBOOT_MACHINE = "Marsboard_A10_config"
-SUNXI_FEX_FILE = "sys_config/a10/marsboard_a10.fex"
--- a/conf/machine/nanopi-m1.conf
+++ b/conf/machine/nanopi-m1.conf
@ -1,8 +0,0 @@
-#@TYPE: Machine
-#@NAME: NanoPi M1
-#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi Neo, based on #the Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-nanopi-m1.dtb"
-UBOOT_MACHINE = "nanopi_m1_defconfig"
--- a/conf/machine/nanopi-neo-plus2.conf
+++ b/conf/machine/nanopi-neo-plus2.conf
@ -4,7 +4,6 @@
 # on the Allwinner H5 SoC.

 require conf/machine/include/sun50i.inc
-require conf/machine/include/hardware/ap6212a.inc

 KERNEL_DEVICETREE = "allwinner/sun50i-h5-nanopi-neo-plus2.dtb"
 UBOOT_MACHINE = "nanopi_neo_plus2_defconfig"
--- a/conf/machine/orange-pi-zero-plus2-h3.conf
+++ b/conf/machine/orange-pi-zero-plus2-h3.conf
@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-zero-plus2-h3
-#@DESCRIPTION: Machine configuration for the orange-pi-zero-plus2, based on Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-require conf/machine/include/hardware/ap6212a.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-orangepi-zero-plus2.dtb"
-UBOOT_MACHINE = "orangepi_zero_plus2_h3_defconfig"
--- a/conf/machine/orange-pi-zero-plus2.conf
+++ b/conf/machine/orange-pi-zero-plus2.conf
@ -2,8 +2,8 @@
 #@NAME: orange-pi-zero-plus2
 #@DESCRIPTION: Machine configuration for the orange-pi-zero-plus2, base on Allwinner H5 CPU

+
 require conf/machine/include/sun50i.inc
-require conf/machine/include/hardware/ap6212a.inc

 KERNEL_DEVICETREE = "allwinner/sun50i-h5-orangepi-zero-plus2.dtb"
 UBOOT_MACHINE = "orangepi_zero_plus2_defconfig"
--- a/recipes-bsp/u-boot/files/0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch
+++ b/recipes-bsp/u-boot/files/0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch
@ -1,20 +1,21 @@
-From b1e4b9672d7bdd4a6a4d08b1514b46af25996cc8 Mon Sep 17 00:00:00 2001
+From 6adb2ebdc4022c24497e9ee4dccab41d18e3105d Mon Sep 17 00:00:00 2001
 From: Florin Sarbu <florin@resin.io>
 Date: Wed, 12 Sep 2018 14:22:49 +0200
 Subject: [PATCH] nanopi_neo_air_defconfig: Enable eMMC support

 Upstream-status: Pending
 Signed-off-by: Florin Sarbu <florin@resin.io>
+
 ---
 configs/nanopi_neo_air_defconfig | 1 +
 1 file changed, 1 insertion(+)

 diff --git a/configs/nanopi_neo_air_defconfig b/configs/nanopi_neo_air_defconfig
-index baaccf145e..77fa1489e4 100644
+index 5ad90ddd16..8b7a4eb45d 100644
 --- a/configs/nanopi_neo_air_defconfig
 +++ b/configs/nanopi_neo_air_defconfig
-@@ -9,3 +9,4 @@ CONFIG_CONSOLE_MUX=y
- CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-neo-air"
+@@ -15,3 +15,4 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-neo-air"
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
+ CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
 +CONFIG_MMC_SUNXI_SLOT_EXTRA=2
--- a/recipes-bsp/u-boot/u-boot_%.bbappend
+++ b/recipes-bsp/u-boot/u-boot_%.bbappend
@ -1,9 +1,9 @@
-FILESEXTRAPATHS_prepend_sunxi := "${THISDIR}/files:"
+FILESEXTRAPATHS_prepend := "${THISDIR}/files:"

-DEPENDS_append_sunxi = " bc-native dtc-native swig-native python3-native flex-native bison-native "
+DEPENDS += " bc-native dtc-native swig-native python3-native flex-native bison-native "
 DEPENDS_append_sun50i = " atf-sunxi "

-COMPATIBLE_MACHINE_sunxi = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"

 DEFAULT_PREFERENCE_sun4i="1"
 DEFAULT_PREFERENCE_sun5i="1"
@ -11,19 +11,19 @@ DEFAULT_PREFERENCE_sun7i="1"
 DEFAULT_PREFERENCE_sun8i="1"
 DEFAULT_PREFERENCE_sun50i="1"

-SRC_URI_append_sunxi = " \
+SRC_URI += " \
           file://0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch \
           file://boot.cmd \
           "

-UBOOT_ENV_SUFFIX_sunxi = "scr"
-UBOOT_ENV_sunxi = "boot"
+UBOOT_ENV_SUFFIX = "scr"
+UBOOT_ENV = "boot"

-EXTRA_OEMAKE_append_sunxi = ' HOSTLDSHARED="${BUILD_CC} -shared ${BUILD_LDFLAGS} ${BUILD_CFLAGS}" '
+EXTRA_OEMAKE += ' HOSTLDSHARED="${BUILD_CC} -shared ${BUILD_LDFLAGS} ${BUILD_CFLAGS}" '
 EXTRA_OEMAKE_append_sun50i = " BL31=${DEPLOY_DIR_IMAGE}/bl31.bin "

 do_compile_sun50i[depends] += "atf-sunxi:do_deploy"

-do_compile_append_sunxi() {
+do_compile_append() {
    ${B}/tools/mkimage -C none -A arm -T script -d ${WORKDIR}/boot.cmd ${WORKDIR}/${UBOOT_ENV_BINARY}
 }
--- a/recipes-devtools/python/files/setup.py.patch
+++ b/recipes-devtools/python/files/setup.py.patch
@ -0,0 +1,51 @@
+--- pyA20-0.2.1/setup.py	2014-09-04 12:17:18.000000000 +0200
+++ pyA20-0.2.1/setup.py	2014-11-24 17:44:37.000000000 +0100
+@@ -43,31 +43,31 @@
+     Detect processor type
+     :return:
+     """
+-    cpuinfo = open("/proc/cpuinfo", 'r')
+-    for line in cpuinfo:
+-        if "Hardware" in line:
+-            processor = line.split(":")[1].rstrip()
+    #cpuinfo = open("/proc/cpuinfo", 'r')
+    #for line in cpuinfo:
+    #    if "Hardware" in line:
+    #        processor = line.split(":")[1].rstrip()
+ 
+-            if "sun4i" in processor:
+-                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A10)")
+    #        if "sun4i" in processor:
+    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A10)")
+ 
+-            elif "sun5i" in processor:
+-                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A13)")
+    #        elif "sun5i" in processor:
+    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A13)")
+ 
+-            elif "sun7i" in processor:
+-                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A20)")
+    #        elif "sun7i" in processor:
+    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A20)")
+ 
+-            else:
+-                print ("Detected processor: " + print_color("unknown"))
+    #        else:
+    #            print ("Detected processor: " + print_color("unknown"))
+ 
+ 
+-            if processor_type not in processor:
+-                print_warning()
+    #        if processor_type not in processor:
+    #            print_warning()
+ 
+-            return
+    return
+ 
+-    print ("No processor detected")
+-    print_warning()
+    #print ("No processor detected")
+    #print_warning()
+ 
+ 
+ class build_ext(_build_ext):
--- a/recipes-devtools/python/pya20_0.2.12.bb
+++ b/recipes-devtools/python/pya20_0.2.12.bb
@ -1,23 +1,24 @@
 DESCRIPTION = "A module to control Allwinner GPIO,SPI and I2C channels"
 HOMEPAGE = "https://pypi.python.org/pypi/pyA20"
 SECTION = "devel/python"
-LICENSE = "GPLv3"
-LIC_FILES_CHKSUM = "file://PKG-INFO;md5=4e584373bb0f46ef1e423cb7df37847d"
-DEPENDS = "python3"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://PKG-INFO;md5=bfe0261ded6cff75086193ec2f79129e"
+DEPENDS = "python"

 # No GPIO mappings for other machines yet
 COMPATIBLE_MACHINE = "(olinuxino-a13|olinuxino-a10|olinuxino-a20|olinuxino-a10lime|olinuxino-a20lime|olinuxino-a20lime2|olinuxino-a13som|olinuxino-a20som)"

 SRC_URI = "https://pypi.python.org/packages/source/p/pyA20/pyA20-${PV}.tar.gz \
+           file://setup.py.patch \
           file://mapping.h \
          "
 S = "${WORKDIR}/pyA20-${PV}"

-inherit distutils3
+inherit distutils

 do_compile_prepend() { 
 cp ${WORKDIR}/mapping.h ${S}/pyA20/gpio/mapping.h
 }

-SRC_URI[md5sum] = "cab03b4931199804603d1074f6d8f48f"
-SRC_URI[sha256sum] = "4bef559a9c5a4d648d9834bad996cf2805b20d6063b8051029ffdf9deda2b536"
+SRC_URI[md5sum] = "2290066bbe274000c53693959a8005b4"
+SRC_URI[sha256sum] = "b15e4ee1016b7eb52001cbccde3751868624a88d2adbb9adc5404628f7e59e7e"
--- a/recipes-devtools/python/pya20som_0.2.1.bb
+++ b/recipes-devtools/python/pya20som_0.2.1.bb
@ -0,0 +1,24 @@
+DESCRIPTION = "A module to control Allwinner GPIO,SPI and I2C channels"
+HOMEPAGE = "https://pypi.python.org/pypi/pyA20SOM"
+SECTION = "devel/python"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://PKG-INFO;md5=cf6345f2cb2acee98b01c493d68b8322"
+DEPENDS = "python"
+
+# No GPIO mappings for other machines yet
+COMPATIBLE_MACHINE = "olinuxino-a20som"
+
+SRC_URI = "https://pypi.python.org/packages/source/p/pyA20SOM/pyA20SOM-${PV}.tar.gz \
+           file://setup.py.patch \
+           file://mapping.h \
+          "
+S = "${WORKDIR}/pyA20SOM-${PV}"
+
+inherit distutils
+
+do_compile_prepend() { 
+cp ${WORKDIR}/mapping.h ${S}/pyA20SOM/gpio/mapping.h
+}
+
+SRC_URI[md5sum] = "a720115ef1d3dffe82f42f2157ca1c56"
+SRC_URI[sha256sum] = "1ac1025596cc112964f7caac9a6a523d5da61623c248ccc178c6cbb4bc1b4549"
--- a/recipes-graphics/mesa/mesa_%.bbappend
+++ b/recipes-graphics/mesa/mesa_%.bbappend
@ -1,5 +0,0 @@
-# Enable lima and panfrost Mesa drivers
-PACKAGECONFIG_append_use-mailine-graphics = " lima panfrost"
-# Enable KMS renderonly Mesa support
-# See https://cgit.freedesktop.org/mesa/mesa/commit/?id=2b780fe89300199f2334539aa1678e9b68f0434f
-GALLIUMDRIVERS_append_use-mailine-graphics = ",kmsro"
--- a/recipes-kernel/linux-firmware/linux-firmware_%.bbappend
+++ b/recipes-kernel/linux-firmware/linux-firmware_%.bbappend
@ -1,13 +0,0 @@
-# The brcmfmac driver looks for NVRAM files using the first entry in board
-# compatible since kernel >= 5.0:
-# https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=0ad4b55b2f29784f93875e6231bf57cd233624a2
-# We create a link to the AP6212 module NVRAM file so that firmware is
-# autodetected by the driver.
-# WARNING: The following commit is required for NVRAM files to be included in
-# linux-firmware-bcm43430 package:
-# http://git.openembedded.org/openembedded-core/commit/?id=dde0f79f32fa6bab045ef60199903f74c4cc3393
-do_install_append() {
-	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2.txt
-	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2-h3.txt
-	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt
-}
--- a/recipes-kernel/linux/linux-mainline/aarch64/defconfig
+++ b/recipes-kernel/linux/linux-mainline/aarch64/defconfig
@ -339,7 +339,6 @@ CONFIG_MFD_MAX77620=y
 CONFIG_MFD_SPMI_PMIC=y
 CONFIG_MFD_RK808=y
 CONFIG_MFD_SEC_CORE=y
-CONFIG_REGULATOR=y
 CONFIG_REGULATOR_AXP20X=y
 CONFIG_REGULATOR_FAN53555=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
--- a/recipes-kernel/linux/linux-mainline/arm/defconfig
+++ b/recipes-kernel/linux/linux-mainline/arm/defconfig
@ -485,8 +485,8 @@ CONFIG_CW1200_WLAN_SDIO=m
 CONFIG_CW1200_WLAN_SPI=m
 CONFIG_RSI_91X=m
 # CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_INPUT_MOUSE=y
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_SUN4I=y
 CONFIG_INPUT_MISC=y
--- a/recipes-kernel/linux/linux-mainline/axp20x.cfg
+++ b/recipes-kernel/linux/linux-mainline/axp20x.cfg
@ -1,4 +0,0 @@
-CONFIG_MFD_AXP20X_I2C=y
-CONFIG_MFD_AXP20X=y
-CONFIG_IIO=y
-CONFIG_AXP20X_POWER=y
--- a/recipes-kernel/linux/linux-mainline/drm.cfg
+++ b/recipes-kernel/linux/linux-mainline/drm.cfg
@ -1,9 +0,0 @@
-CONFIG_DRM=y
-CONFIG_DRM_SUN4I=y
-CONFIG_DRM_SUN8I_DW_HDMI=y
-CONFIG_DRM_SUN8I_MIXER=y
-CONFIG_IOMMU_SUPPORT=y
-CONFIG_DRM_LIMA=y
-CONFIG_DRM_PANFROST=y
-CONFIG_CMA=y
-CONFIG_DMA_CMA=y
--- a/recipes-kernel/linux/linux-mainline/orange-pi-zero/0001-dts-orange-pi-zero-Add-wifi-support.patch
+++ b/recipes-kernel/linux/linux-mainline/orange-pi-zero/0001-dts-orange-pi-zero-Add-wifi-support.patch
@ -1,18 +1,28 @@
+From 055155f463693e61f9018a011ad600d872d6736f Mon Sep 17 00:00:00 2001
+From: Marek Belisko <marek.belisko@open-nandra.com>
+Date: Fri, 2 Aug 2019 14:46:10 +0200
+Subject: [PATCH] dts: orange-pi-zero: Add wifi support
+
+Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
+---
+ arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts | 47 ++++++++++++++++++-----
+ 1 file changed, 37 insertions(+), 10 deletions(-)
+
 diff --git a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
-index 84cd9c061..917986cce 100644
+index 84cd9c0..77b2fc6 100644
 --- a/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
 +++ b/arch/arm/boot/dts/sun8i-h2-plus-orangepi-zero.dts
-@@ -80,13 +80,15 @@
+@@ -80,13 +80,14 @@
 		};
 	};
 
 -	reg_vcc_wifi: reg_vcc_wifi {
-+	vdd_wifi: vdd_wifi {
- 		compatible = "regulator-fixed";
+-		compatible = "regulator-fixed";
 -		regulator-min-microvolt = <3300000>;
 -		regulator-max-microvolt = <3300000>;
 -		regulator-name = "vcc-wifi";
 -		enable-active-high;
+	vdd_wifi: vdd_wifi {
 +		regulator-name = "wifi";
 +		regulator-min-microvolt = <1800000>;
 +		regulator-max-microvolt = <1800000>;
@ -23,7 +33,7 @@ index 84cd9c061..917986cce 100644
 	};
 
 	reg_vdd_cpux: vdd-cpux-regulator {
-@@ -106,10 +108,12 @@
+@@ -106,10 +107,12 @@
 			  1300000 1>;
 	};
 
@ -38,7 +48,7 @@ index 84cd9c061..917986cce 100644
 	};
 };
 
-@@ -140,9 +144,11 @@
+@@ -140,9 +143,11 @@
 };
 
 &mmc1 {
@ -52,7 +62,7 @@ index 84cd9c061..917986cce 100644
 	non-removable;
 	status = "okay";
 
-@@ -152,6 +158,13 @@
+@@ -152,6 +157,13 @@
 	 */
 	xr819: sdio_wifi@1 {
 		reg = <1>;
@ -66,7 +76,7 @@ index 84cd9c061..917986cce 100644
 	};
 };
 
-@@ -208,3 +221,18 @@
+@@ -208,3 +220,18 @@
 	status = "okay";
 	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
 };
@ -85,3 +95,6 @@ index 84cd9c061..917986cce 100644
 +    };
 +};
 +
+-- 
+2.7.4
+
--- a/recipes-kernel/linux/linux-mainline_4.19.81.bb
+++ b/recipes-kernel/linux/linux-mainline_4.19.81.bb
@ -0,0 +1,32 @@
+SECTION = "kernel"
+DESCRIPTION = "Mainline Longterm Linux kernel"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
+
+inherit kernel
+
+require linux.inc
+
+# Since we're not using git, this doesn't make a difference, but we need to fill
+# in something or kernel-yocto.bbclass will fail.
+KBRANCH ?= "master"
+
+# Pull in the devicetree files into the rootfs
+RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"
+
+KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
+
+S = "${WORKDIR}/linux-${PV}"
+
+SRC_URI[md5sum] = "bf96b6783a2d11178a2aaa3cf376f975"
+SRC_URI[sha256sum] = "293ec1ae0f6b3b4be83a217224b51d137f2163cf2d9d294eecf5d0a354e4e29d"
+
+SRC_URI = "https://www.kernel.org/pub/linux/kernel/v4.x/linux-${PV}.tar.xz \
+        file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
+        file://defconfig \
+        "
+
+SRC_URI_append_orange-pi-zero += "\
+	file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
+	"
--- a/recipes-kernel/linux/linux-mainline_5.10.2.bb
+++ b/recipes-kernel/linux/linux-mainline_5.10.2.bb
@ -1,8 +0,0 @@
-require linux-mainline.inc
-
-DESCRIPTION = "Mainline Longterm Linux kernel"
-
-LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46"
-
-SRC_URI[md5sum] = "0751179f60de73eb2cd93f161fa52fcf"
-SRC_URI[sha256sum] = "3b84e13abae26af17ebccc4d7212f5843a991127a73a320848d5c6942ef781a2"
--- a/recipes-kernel/linux/linux-mainline_5.3.8.bb
+++ b/recipes-kernel/linux/linux-mainline_5.3.8.bb
@ -1,5 +1,7 @@
 SECTION = "kernel"
+DESCRIPTION = "Mainline Stable Linux kernel"
 LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
 COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"

 inherit kernel
@ -19,14 +21,14 @@ KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"

 S = "${WORKDIR}/linux-${PV}"

+SRC_URI[md5sum] = "6f4ab59d6ac7311f4245fc359706a0b7"
+SRC_URI[sha256sum] = "78f3cfc6c20b10ff21c0bb22d7d257cab03781c44d8c5aae289f749f94f76649"
+
 SRC_URI = "https://www.kernel.org/pub/linux/kernel/v5.x/linux-${PV}.tar.xz \
-	file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
+        file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
+        file://defconfig \
+        "
+
+SRC_URI_append_orange-pi-zero += "\
 	file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
-	file://defconfig \
-"
-
-SRC_URI_append_use-mailine-graphics = " file://drm.cfg"
-SRC_URI_append_bananapi = " file://axp20x.cfg"
-SRC_URI_append_cubietruck = " file://axp20x.cfg"
-
-FILES_${KERNEL_PACKAGE_NAME}-base_append = " ${nonarch_base_libdir}/modules/${KERNEL_VERSION}/modules.builtin.modinfo"
+	"
--- a/recipes-kernel/linux/linux-mainline_5.4-rc6.bb
+++ b/recipes-kernel/linux/linux-mainline_5.4-rc6.bb
@ -0,0 +1,36 @@
+SECTION = "kernel"
+DESCRIPTION = "Mainline RC Linux kernel"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
+
+inherit kernel
+
+require linux.inc
+
+# Since we're not using git, this doesn't make a difference, but we need to fill
+# in something or kernel-yocto.bbclass will fail.
+KBRANCH ?= "master"
+
+DEPENDS += "rsync-native"
+
+# Pull in the devicetree files into the rootfs
+RDEPENDS_${KERNEL_PACKAGE_NAME}-base += "kernel-devicetree"
+
+KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
+
+S = "${WORKDIR}/linux-${PV}"
+
+SRC_URI[md5sum] = "58b2b15fb3c429948051ce4f12f30c37"
+SRC_URI[sha256sum] = "b07532aa008438e0bce2b8f0253079a4f1654a048a75ae1477c8826f32feea7a"
+
+SRC_URI = "https://git.kernel.org/torvalds/t/linux-${PV}.tar.gz \
+        file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
+        file://defconfig \
+        "
+SRC_URI_append_orange-pi-zero += "\
+	file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
+	"
+
+FILES_${KERNEL_PACKAGE_NAME}-base_append = " ${nonarch_base_libdir}/modules/${KERNEL_VERSION}/modules.builtin.modinfo"
+
--- a/recipes-kernel/linux/linux-mainline_5.4.69.bb
+++ b/recipes-kernel/linux/linux-mainline_5.4.69.bb
@ -1,8 +0,0 @@
-require linux-mainline.inc
-
-DESCRIPTION = "Mainline Longterm Linux kernel"
-
-LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
-
-SRC_URI[md5sum] = "98c8187b801f006ba203db0669e307a5"
-SRC_URI[sha256sum] = "a8b31d716b397303a183e42ad525ff2871024a43e3ea530d0fdf73b7f9d27da7"
--- a/recipes-kernel/xradio-firmware/xradio-firmware.bb
+++ b/recipes-kernel/xradio-firmware/xradio-firmware.bb
@ -5,7 +5,7 @@ LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/${LICENSE};md5=0ceb3372c9595f0a
 PV = "1.0"
 PR = "r0"

-SRCREV = "761658e1701c77a0a84706754e6db1a25ee60b82"
+SRCREV = "bddd21b7f895be9f0c37e435f0a7ac84405c6091"

 COMPATIBLE_MACHINE = "orange-pi-zero"

--- a/recipes-kernel/xradio/xradio.bb
+++ b/recipes-kernel/xradio/xradio.bb
@ -11,11 +11,9 @@ RDEPENDS_${PN} += "xradio-firmware"

 COMPATIBLE_MACHINE = "orange-pi-zero"

-SRCREV = "279868ac96f6db34b65f68c6722830fa0aacb86b"
+SRCREV = "d649e5a78efdc56ecd0951e35ca60db175650232"

-SRC_URI = "\
-	   git://github.com/dbeinder/xradio.git;protocol=https;branch=karabek_rebase \
-	file://0001-Enable-out-of-tree-compilation.patch \
+SRC_URI = "git://github.com/fifteenhex/xradio.git;protocol=https \
          "

 S = "${WORKDIR}/git"
--- a/recipes-kernel/xradio/xradio/0001-Enable-out-of-tree-compilation.patch
+++ b/recipes-kernel/xradio/xradio/0001-Enable-out-of-tree-compilation.patch
@ -1,30 +0,0 @@
-From 15651d333da5429a1544f0a17d5f02c74f693ad7 Mon Sep 17 00:00:00 2001
-From: Marek Belisko <marek.belisko@open-nandra.com>
-Date: Thu, 15 Oct 2020 14:45:07 +0200
-Subject: [PATCH] Enable out of tree compilation
-
-Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
---
- Makefile | 6 +++---
- 1 file changed, 3 insertions(+), 3 deletions(-)
-
-diff --git a/Makefile b/Makefile
-index 7a0de9a..ee75f0b 100644
--- a/Makefile
-+++ b/Makefile
-@@ -1,9 +1,9 @@
- # SPDX-License-Identifier: GPL-2.0-only
- 
- # # Standalone Makefile - uncomment for out-of-tree compilation
-# CONFIG_WLAN_VENDOR_XRADIO := m
-# ccflags-y += -DCONFIG_XRADIO_USE_EXTENSIONS
-# ccflags-y += -DCONFIG_XRADIO_WAPI_SUPPORT
-+CONFIG_WLAN_VENDOR_XRADIO := m
-+ccflags-y += -DCONFIG_XRADIO_USE_EXTENSIONS
-+ccflags-y += -DCONFIG_XRADIO_WAPI_SUPPORT
- 
- # Kernel part
- 
-- 
-2.7.4
-
--- a/wic/sunxi-sdcard-image.wks.in
+++ b/wic/sunxi-sdcard-image.wks.in
@ -1,18 +0,0 @@
-# short-description: Create SD card image with a boot partition
-# long-description:
-# Create an image that can be written onto a SD card using dd for use
-# with Allwinner arm (32-bit) SoC family
-#
-# The disk layout used is:
-#  - --------------------------- -------------- --------------
-# | | u-boot-sunxi-with-spl.bin |     boot     |    rootfs    |
-#  - --------------------------- -------------- --------------
-# ^ ^                           ^              ^              ^
-# | |                           |              |              |
-# 0 |                         2MiB  ${SUNXI_BOOT_SPACE}MiB  ${SUNXI_BOOT_SPACE}MiB + rootfs + IMAGE_EXTRA_SPACE
-#   8KiB 
-#
-
-part u-boot --source rawcopy --sourceparams="file=${SPL_BINARY}" --ondisk mmcblk0 --no-table --align 8
-part /boot --source bootimg-partition --ondisk mmcblk0 --fstype=vfat --label boot --active --align 2048 --fixed-size ${SUNXI_BOOT_SPACE}
-part /     --source rootfs --ondisk mmcblk0 --fstype=ext4 --align 2048
Author	SHA1	Message	Date
Marek Belisko	26ecaec7cb	Merge pull request #279 from kedder/zeus Backport linux-sunxi compilation fixes to Zeus	2020-01-26 19:35:19 +01:00
Andrey Lebedev	3aec777673	Mention that devicetree needs to be disabled for old kernel	2020-01-26 12:11:20 +02:00
Andrey Lebedev	b88a5c62f1	Correctly generate .config file for the compilation	2020-01-26 12:11:20 +02:00
Andrey Lebedev	3107a0c1c9	u-boot-sunxi: fix compilation under gcc, newer than 4	2020-01-26 12:11:19 +02:00
Andrey Lebedev	4c6dd3d573	linux-sunxi: fix compilation issue on gcc-9 Error comes in form of /tmp/ccCGMQmS.s:648: Error: .err encountered Tested on zeus branch of linux-sunxi.	2020-01-26 12:11:19 +02:00