olinuxino-a20lime2: fix UBOOT_MACHINE

Signed-off-by: Enrico Butera <ebutera@users.sourceforge.net>
Merge pull request #128 from jlucius/master
2025-07-16 13:59:46 +02:00 · 2016-02-13 20:01:25 +01:00 · 2015-12-16 14:48:31 +01:00 · 2015-12-16 06:23:35 +01:00 · 2015-12-08 21:38:12 +01:00 · 2015-11-21 18:11:46 +01:00
70 changed files with 6963 additions and 457 deletions
--- a/README.md
+++ b/README.md
@ -15,7 +15,29 @@ Maintainers:
 * Enrico Butera <ebutera@users.sourceforge.net>
 * Sergey Lapin <slapin@ossfans.org>

+Kernel / U-Boot Version
+===========
+Most Allwinner devices and hardware are supported in mainline kernel and U-Boot, so this layer builds mainline by default.
+There is a custom U-Boot and Kernel version for sunxi devices which includes some special drivers not mainlined.
+These versions are rather old (3.4 for kernel and 2014.04 for U-Boot), but may support more functions and devices than current mainline 

+If you want to switch back to sunxi versions for some reasons (no device tree available, unsupported hardware), either:
+- change the file conf/machine/include/sunxi.inc to include the following block
+- edit your conf/local.conf to add the following block
+
+	PREFERRED_PROVIDER_u-boot="u-boot-sunxi"
+	PREFERRED_PROVIDER_virtual/bootloader="u-boot-sunxi"
+	PREFERRED_PROVIDER_virtual/kernel="linux-sunxi"
+
+If you already have built the mainline versions it might be necessary to reset the build directories with:
+
+	bitbake -c clean linux
+	bitbake -c clean u-boot
+
+Also, older kernel versions such as this don't build successfully with any gcc version 5.0 or newer. Since gcc-5.2 is the current
+default compiler on master, if you wish to build this kernel with master you'll need to add the following to your conf/local.conf:
+
+	GCCVERSION = "4.9%"

 Performance
 ===========
--- a/classes/sdcard_image-sunxi.bbclass
+++ b/classes/sdcard_image-sunxi.bbclass
@ -26,7 +26,7 @@ BOOT_SPACE ?= "20480"
 IMAGE_ROOTFS_ALIGNMENT = "2048"

 # Use an uncompressed ext3 by default as rootfs
-SDIMG_ROOTFS_TYPE ?= "ext3"
+SDIMG_ROOTFS_TYPE ?= "ext4"
 SDIMG_ROOTFS = "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.${SDIMG_ROOTFS_TYPE}"

 IMAGE_DEPENDS_sunxi-sdimg += " \
@ -35,10 +35,9 @@ IMAGE_DEPENDS_sunxi-sdimg += " \
 			dosfstools-native \
 			virtual/kernel \
 			virtual/bootloader \
-                        sunxi-board-fex \
 			"

-rootfs[depends] += "sunxi-board-fex:do_deploy"
+rootfs[depends] += "virtual/kernel:do_deploy"

 # SD card image name
 SDIMG = "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.sunxi-sdimg"
@ -66,12 +65,34 @@ IMAGE_CMD_sunxi-sdimg () {

 	# Create a vfat image with boot files
 	BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }')
+	rm -f ${WORKDIR}/boot.img
 	mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
-	mcopy -i ${WORKDIR}/boot.img -s ${STAGING_DIR_HOST}/usr/src/kernel/${KERNEL_IMAGETYPE} ::uImage
+
+	mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::uImage
+
+	# Copy device tree file
+	if test -n "${KERNEL_DEVICETREE}"; then
+		for DTS_FILE in ${KERNEL_DEVICETREE}; do
+			DTS_BASE_NAME=`basename ${DTS_FILE} | awk -F "." '{print $1}'`
+			if [ -e "${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb" ]; then
+				kernel_bin="`readlink ${KERNEL_IMAGETYPE}-${MACHINE}.bin`"
+				kernel_bin_for_dtb="`readlink ${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb | sed "s,$DTS_BASE_NAME,${MACHINE},g;s,\.dtb$,.bin,g"`"
+				if [ $kernel_bin = $kernel_bin_for_dtb ]; then
+					mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb ::/${DTS_BASE_NAME}.dtb
+				fi
+			fi
+		done
+	fi
+
 	if [ -e "${DEPLOY_DIR_IMAGE}/fex.bin" ]
 	then
 		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/fex.bin ::script.bin
 	fi
+	if [ -e "${DEPLOY_DIR_IMAGE}/boot.scr" ]
+	then
+		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/boot.scr ::boot.scr
+	fi
+

 	# Add stamp file
 	echo "${IMAGE_NAME}-${IMAGEDATESTAMP}" > ${WORKDIR}/image-version-info
--- a/conf/machine/bananapi.conf
+++ b/conf/machine/bananapi.conf
@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: Bananapi
+#@DESCRIPTION: Machine configuration for the bananapi, based on allwinner A20 CPU http://bananapi.org/
+
+require conf/machine/include/sun7i.inc
+
+KERNEL_DEVICETREE = "sun7i-a20-bananapi.dtb"
+UBOOT_MACHINE = "Bananapi_config"
+SUNXI_FEX_FILE = "sys_config/a20/Bananapi.fex"
--- a/conf/machine/cubieboard.conf
+++ b/conf/machine/cubieboard.conf
@ -2,17 +2,8 @@
 #@NAME: CubieBoard
 #@DESCRIPTION: Machine configuration for the cubieboard, based on allwinner a10 CPU http://cubieboard.org/

-# Only has DVI connector for external screen
-GUI_MACHINE_CLASS = "bigscreen"
-
-require conf/machine/include/tune-cortexa8.inc
-require conf/machine/include/sunxi.inc
-require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/sun4i.inc

+KERNEL_DEVICETREE = "sun4i-a10-cubieboard.dtb"
 UBOOT_MACHINE = "Cubieboard_config"
-UBOOT_ENTRYPOINT = "0x40008000"
-UBOOT_LOADADDRESS = "0x40008000"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"
+SUNXI_FEX_FILE = "sys_config/a10/cubieboard.fex"
--- a/conf/machine/cubieboard2.conf
+++ b/conf/machine/cubieboard2.conf
@ -2,17 +2,8 @@
 #@NAME: CubieBoard2
 #@DESCRIPTION: Machine configuration for the cubieboard2, based on allwinner A20 CPU http://cubieboard.org/

-# Only has DVI connector for external screen
-GUI_MACHINE_CLASS = "bigscreen"
-
-require conf/machine/include/tune-cortexa7.inc
-require conf/machine/include/sunxi.inc
-require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/sun7i.inc

+KERNEL_DEVICETREE = "sun7i-a20-cubieboard2.dtb"
 UBOOT_MACHINE = "Cubieboard2_config"
-UBOOT_ENTRYPOINT = "0x40008000"
-UBOOT_LOADADDRESS = "0x40008000"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-MACHINE_FEATURES = "screen apm usbgadget usbhost vfat"
+SUNXI_FEX_FILE = "sys_config/a20/cubieboard2.fex"
--- a/conf/machine/cubietruck.conf
+++ b/conf/machine/cubietruck.conf
@ -2,17 +2,8 @@
 #@NAME: Cubietruck
 #@DESCRIPTION: Machine configuration for the Cubietruck, based on allwinner A20 CPU http://cubieboard.org/

-# Only has DVI connector for external screen
-GUI_MACHINE_CLASS = "bigscreen"
-
-require conf/machine/include/tune-cortexa7.inc
-require conf/machine/include/sunxi.inc
-require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/sun7i.inc

+KERNEL_DEVICETREE = "sun7i-a20-cubietruck.dtb"
 UBOOT_MACHINE = "Cubietruck_config"
-UBOOT_ENTRYPOINT = "0x40008000"
-UBOOT_LOADADDRESS = "0x40008000"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-MACHINE_FEATURES = "screen apm usbgadget usbhost vfat"
+SUNXI_FEX_FILE = "sys_config/a20/cubietruck.fex"
--- a/conf/machine/forfun-q88db.conf
+++ b/conf/machine/forfun-q88db.conf
@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: Forfun Q88DB
+#@DESCRIPTION: Machine configuration for the Forfun Q88DB Tablet with A13 CPU
+#http://linux-sunxi.org/Forfun_Q88DB
+
+require conf/machine/include/sun5i.inc
+
+UBOOT_MACHINE = "forfun_q88db_defconfig"
+SUNXI_FEX_FILE = "sys_config/a13/forfun_q88db.fex"
--- a/conf/machine/include/sun4i.inc
+++ b/conf/machine/include/sun4i.inc
@ -0,0 +1,5 @@
+require conf/machine/include/sunxi.inc
+require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/tune-cortexa8.inc
+
+SOC_FAMILY = "sun4i"
--- a/conf/machine/include/sun5i.inc
+++ b/conf/machine/include/sun5i.inc
@ -0,0 +1,5 @@
+require conf/machine/include/sunxi.inc
+require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/tune-cortexa8.inc
+
+SOC_FAMILY = "sun5i"
--- a/conf/machine/include/sun7i.inc
+++ b/conf/machine/include/sun7i.inc
@ -0,0 +1,5 @@
+require conf/machine/include/sunxi.inc
+require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/tune-cortexa7.inc
+
+SOC_FAMILY = "sun7i"
--- a/conf/machine/include/sunxi.inc
+++ b/conf/machine/include/sunxi.inc
@ -1,3 +1,10 @@
+SOC_FAMILY ??= ""
+include conf/machine/include/soc-family.inc
+
+# Sub-architecture support
+MACHINE_SOCARCH_SUFFIX ?= ""
+MACHINE_SOCARCH_SUFFIX_sun4i = "-sun4i"
+
 PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
 XSERVER = "xserver-xorg \
           xf86-video-fbturbo \
@ -5,14 +12,21 @@ XSERVER = "xserver-xorg \
           xf86-input-mouse \
           xf86-input-keyboard"

-PREFERRED_PROVIDER_virtual/kernel = "linux"
-PREFERRED_VERSION_linux-libc-headers = "3.4.61"
+PREFERRED_PROVIDER_virtual/kernel ?= "linux"
+PREFERRED_PROVIDER_u-boot ?= "u-boot"
+PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"

-KERNEL_IMAGETYPE = "uImage"
+KERNEL_IMAGETYPE ?= "uImage"

 IMAGE_CLASSES += "sdcard_image-sunxi"
 IMAGE_FSTYPES += "ext3 tar.gz sunxi-sdimg"

 MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"

-UBOOT_LOCALVERSION = "-g${@d.getVar('SRCPV', True).partition('+')[2][0:7]}"
+UBOOT_LOCALVERSION = "-g${@d.getVar('SRCPV', True).partition('+')[2][0:7]}"
+
+UBOOT_ENTRYPOINT ?= "0x40008000"
+UBOOT_LOADADDRESS ?= "0x400080OB00"
+
+SERIAL_CONSOLE ?= "115200 ttyS0"
+MACHINE_FEATURES ?= "alsa apm keyboard rtc serial screen usbgadget usbhost vfat"
--- a/conf/machine/mele.conf
+++ b/conf/machine/mele.conf
@ -2,17 +2,8 @@
 #@NAME: Mele a1000/a2000
 #@DESCRIPTION: Machine configuration for the Mele a1000 and a2000, base on allwinner a10 CPU

-# Only has DVI connector for external screen
-GUI_MACHINE_CLASS = "bigscreen"
-
-require conf/machine/include/tune-cortexa8.inc
-require conf/machine/include/sunxi.inc
-require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/sun4i.inc

+KERNEL_DEVICETREE = "sun4i-a10-a1000.dtb"
 UBOOT_MACHINE = "Mele_A1000_config"
-UBOOT_ENTRYPOINT = "0x40008000"
-UBOOT_LOADADDRESS = "0x40008000"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"
+SUNXI_FEX_FILE = "sys_config/a10/mele_a1000.fex"
--- a/conf/machine/meleg.conf
+++ b/conf/machine/meleg.conf
@ -2,17 +2,7 @@
 #@NAME: Mele a1000g/a2000g
 #@DESCRIPTION: Machine configuration for the Mele a1000g and a2000g, base on allwinner a10 CPU

-# Only has DVI connector for external screen
-GUI_MACHINE_CLASS = "bigscreen"
+require conf/machine/include/sun4i.inc

-require conf/machine/include/tune-cortexa8.inc
-require conf/machine/include/sunxi.inc
-require conf/machine/include/sunxi-mali.inc
-
-UBOOT_MACHINE = "Mele_A1000G_config"
-UBOOT_ENTRYPOINT = "0x40008000"
-UBOOT_LOADADDRESS = "0x40008000"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"
+UBOOT_MACHINE = "Mele_A1000G_quad_config"
+SUNXI_FEX_FILE = "sys_config/a10/mele_a1000g.fex"
--- a/conf/machine/olinuxino-a10.conf
+++ b/conf/machine/olinuxino-a10.conf
@ -1,20 +0,0 @@
-#@TYPE: Machine
-#@NAME: Olimex A10-OLinuXino-LIME Board
-#@DESCRIPTION: Machine configuration for Olimex A10-OLinuXino-LIME Board, based on Allwinner A10 CPU
-#https://github.com/OLIMEX/OLINUXINO
-
-# There are also LCD possibilities
-GUI_MACHINE_CLASS = "bigscreen"
-
-require conf/machine/include/tune-cortexa8.inc
-require conf/machine/include/sunxi.inc
-require conf/machine/include/sunxi-mali.inc
-
-
-UBOOT_MACHINE = "A10-OLinuXino-Lime_config"
-UBOOT_ENTRYPOINT = "0x40008000"
-UBOOT_LOADADDRESS = "0x40008000"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"
--- a/conf/machine/olinuxino-a10lime.conf
+++ b/conf/machine/olinuxino-a10lime.conf
@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: Olimex A10-OLinuXino Lime (4GB) Board
+#@DESCRIPTION: Machine configuration for the Olimex A10-OLinuXino Lime Board, based on Allwinner A10 CPU
+#https://github.com/OLIMEX/OLINUXINO
+
+require conf/machine/include/sun4i.inc
+
+KERNEL_DEVICETREE = "sun4i-a10-olinuxino-lime.dtb"
+UBOOT_MACHINE = "A10-OLinuXino-Lime_config"
+SUNXI_FEX_FILE = "sys_config/a10/a10-olinuxino-lime.fex"
--- a/conf/machine/olinuxino-a10s.conf
+++ b/conf/machine/olinuxino-a10s.conf
@ -3,17 +3,8 @@
 #@DESCRIPTION: Machine configuration for Olimex A10S-OLinuXino-MICRO Board, based on Allwinner A10s CPU
 #https://github.com/OLIMEX/OLINUXINO

-# There are also LCD possibilities
-GUI_MACHINE_CLASS = "bigscreen"
+require conf/machine/include/sun5i.inc

-require conf/machine/include/tune-cortexa8.inc
-require conf/machine/include/sunxi.inc
-
-
-UBOOT_MACHINE = "A10s-OLinuXino-Micro_config"
-UBOOT_ENTRYPOINT = "0x40008000"
-UBOOT_LOADADDRESS = "0x40008000"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"
+KERNEL_DEVICETREE = "sun5i-a10s-olinuxino-micro.dtb"
+UBOOT_MACHINE = "A10s-OLinuXino-M_config"
+SUNXI_FEX_FILE = "sys_config/a10s/a10s-olinuxino-m.fex"
--- a/conf/machine/olinuxino-a13.conf
+++ b/conf/machine/olinuxino-a13.conf
@ -3,17 +3,8 @@
 #@DESCRIPTION: Machine configuration for the Olime A13-OLinuXino Board, base on allwinner a13 CPU
 #https://github.com/OLIMEX/OLINUXINO

-# Only has DVI connector for external screen
-GUI_MACHINE_CLASS = "bigscreen"
-
-require conf/machine/include/tune-cortexa8.inc
-require conf/machine/include/sunxi.inc
-require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/sun5i.inc

+KERNEL_DEVICETREE = "sun5i-a13-olinuxino.dtb"
 UBOOT_MACHINE = "A13-OLinuXino_config"
-UBOOT_ENTRYPOINT = "0x40008000"
-UBOOT_LOADADDRESS = "0x40008000"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"
+SUNXI_FEX_FILE = "sys_config/a13/a13-olinuxino.fex"
--- a/conf/machine/olinuxino-a13som.conf
+++ b/conf/machine/olinuxino-a13som.conf
@ -0,0 +1,9 @@
+#@TYPE: Machine
+#@NAME: Olimex A13-SOM
+#@DESCRIPTION: Machine configuration for the Olimex A13-SOM Evaluation Board, based on Allwinner A13 CPU
+#https://github.com/OLIMEX/SOM
+
+require conf/machine/include/sun5i.inc
+
+UBOOT_MACHINE = "OLIMEX-A13-SOM_config"
+SUNXI_FEX_FILE = "sys_config/a13/olimex_a13_som.fex"
--- a/conf/machine/olinuxino-a20.conf
+++ b/conf/machine/olinuxino-a20.conf
@ -3,14 +3,8 @@
 #@DESCRIPTION: Machine configuration for the Olimex A20-OLinuXino Board, based on Allwinner A20 CPU
 #https://github.com/OLIMEX/OLINUXINO

-require conf/machine/include/tune-cortexa7.inc
-require conf/machine/include/sunxi.inc
-require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/sun7i.inc

-UBOOT_MACHINE = "A20-OLinuXino-Micro_config"
-UBOOT_ENTRYPOINT = "0x40008000"
-UBOOT_LOADADDRESS = "0x40008000"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"
+KERNEL_DEVICETREE = "sun7i-a20-olinuxino-micro.dtb"
+UBOOT_MACHINE = "A20-OLinuXino_MICRO_config"
+SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_micro.fex"
--- a/conf/machine/olinuxino-a20lime.conf
+++ b/conf/machine/olinuxino-a20lime.conf
@ -3,14 +3,8 @@
 #@DESCRIPTION: Machine configuration for the Olimex A20-OLinuXino Lime Board, based on Allwinner A20 CPU
 #https://github.com/OLIMEX/OLINUXINO

-require conf/machine/include/tune-cortexa7.inc
-require conf/machine/include/sunxi.inc
-require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/sun7i.inc

+KERNEL_DEVICETREE = "sun7i-a20-olinuxino-lime.dtb"
 UBOOT_MACHINE = "A20-OLinuXino-Lime_config"
-UBOOT_ENTRYPOINT = "0x40008000"
-UBOOT_LOADADDRESS = "0x40008000"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"
+SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_lime.fex"
--- a/conf/machine/olinuxino-a20lime2.conf
+++ b/conf/machine/olinuxino-a20lime2.conf
@ -0,0 +1,10 @@
+#@TYPE: Machine
+#@NAME: Olimex A20-OLinuXino Lime2 (4GB) Board
+#@DESCRIPTION: Machine configuration for the Olimex A20-OLinuXino Lime2 Board, based on Allwinner A20 CPU
+#https://github.com/OLIMEX/OLINUXINO
+
+require conf/machine/include/sun7i.inc
+
+KERNEL_DEVICETREE = "sun7i-a20-olinuxino-lime2.dtb"
+UBOOT_MACHINE = "A20-OLinuXino-Lime2_config"
+SUNXI_FEX_FILE = "sys_config/a20/a20-olinuxino_lime2.fex"
--- a/conf/machine/olinuxino-a20som.conf
+++ b/conf/machine/olinuxino-a20som.conf
@ -3,14 +3,7 @@
 #@DESCRIPTION: Machine configuration for the Olimex A20-SOM Evaluation Board, based on Allwinner A20 CPU
 #https://github.com/OLIMEX/SOM

-require conf/machine/include/tune-cortexa7.inc
-require conf/machine/include/sunxi.inc
-require conf/machine/include/sunxi-mali.inc
+require conf/machine/include/sun7i.inc

 UBOOT_MACHINE = "Olimex_A20-SOM_config"
-UBOOT_ENTRYPOINT = "0x40008000"
-UBOOT_LOADADDRESS = "0x40008000"
-
-SERIAL_CONSOLE = "115200 ttyS0"
-
-MACHINE_FEATURES = "kernel26 screen apm usbgadget usbhost vfat alsa"
+SUNXI_FEX_FILE = "sys_config/a20/olimex_a20_som.fex"
--- a/recipes-bsp/sunxi-board-fex/sunxi-board-fex.bb
+++ b/recipes-bsp/sunxi-board-fex/sunxi-board-fex.bb
@ -7,22 +7,13 @@ DEPENDS = "sunxi-tools-native"
 PV = "1.1+git${SRCPV}"
 PR = "r0"

+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
+
 SRC_URI = "git://github.com/linux-sunxi/sunxi-boards.git;protocol=git"
 # Increase PV with SRCREV change
-SRCREV = "442f0669fec0689dda3e529bcd8be9e554868b5f"
+SRCREV = "496ef0fbd166cc2395daa76dd3c359357420963d"

 S = "${WORKDIR}/git"
-SUNXI_FEX_FILE_mele = "sys_config/a10/mele_a1000.fex"
-SUNXI_FEX_FILE_meleg = "sys_config/a10/mele_a1000g.fex"
-SUNXI_FEX_FILE_olinuxino-a10s = "sys_config/a10s/a10s-olinuxino-m.fex"
-SUNXI_FEX_FILE_olinuxino-a10 = "sys_config/a10/a10-olinuxino-lime.fex"
-SUNXI_FEX_FILE_olinuxino-a13 = "sys_config/a13/a13-olinuxino.fex"
-SUNXI_FEX_FILE_olinuxino-a20 = "sys_config/a20/a20-olinuxino_micro.fex"
-SUNXI_FEX_FILE_olinuxino-a20som = "sys_config/a20/olimex_a20_som.fex"
-SUNXI_FEX_FILE_olinuxino-a20lime = "sys_config/a20/a20-olinuxino_lime.fex"
-SUNXI_FEX_FILE_cubieboard = "sys_config/a10/cubieboard.fex"
-SUNXI_FEX_FILE_cubieboard2 = "sys_config/a20/cubieboard2.fex"
-SUNXI_FEX_FILE_cubietruck= "sys_config/a20/cubietruck.fex"

 SUNXI_FEX_BIN_IMAGE = "fex-${MACHINE}-${PV}-${PR}.bin"
 SUNXI_FEX_BIN_IMAGE_SYMLINK = "fex-${MACHINE}.bin"
@ -54,5 +45,3 @@ do_package_write_ipk[noexec] = "1"
 do_package_write_rpm[noexec] = "1"
 do_package_write_deb[noexec] = "1"
 do_populate_sysroot[noexec] = "1"
-
-COMPATIBLE_MACHINE = "(mele|meleg|olinuxino-a10s|olinuxino-a10|olinuxino-a13|olinuxino-a20|olinuxino-a20som|olinuxino-a20lime|cubieboard|cubieboard2|cubietruck)"
--- a/recipes-bsp/u-boot/files/boot.cmd
+++ b/recipes-bsp/u-boot/files/boot.cmd
@ -0,0 +1,4 @@
+setenv bootargs console=${console} console=tty1 root=/dev/mmcblk0p2 rootwait panic=10 ${extra}
+load mmc 0:1 ${fdt_addr_r} ${fdtfile} || load mmc 0:1 ${fdt_addr_r} boot/${fdtfile}
+load mmc 0:1 ${kernel_addr_r} zImage || load mmc 0:1 ${kernel_addr_r} boot/zImage || load mmc 0:1 ${kernel_addr_r} uImage || load mmc 0:1 ${kernel_addr_r} boot/uImage
+bootz ${kernel_addr_r} - ${fdt_addr_r} || bootm ${kernel_addr_r} - ${fdt_addr_r}
--- a/recipes-bsp/u-boot/u-boot-sunxi.bb
+++ b/recipes-bsp/u-boot/u-boot-sunxi.bb
@ -0,0 +1,36 @@
+DESCRIPTION = "U-Boot port for sunxi"
+
+require recipes-bsp/u-boot/u-boot.inc
+
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://Licenses/gpl-2.0.txt;md5=b234ee4d69f5fce4486a80fdaf4a4263"
+
+# No patches for other machines yet
+
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
+
+DEFAULT_PREFERENCE_sun4i="1"
+DEFAULT_PREFERENCE_sun5i="1"
+DEFAULT_PREFERENCE_sun7i="1"
+
+# Sunxi U-Boot uses different names for some boards
+UBOOT_MACHINE_olinuxino-a20 = "A20-OLinuXino-Micro_config"
+UBOOT_MACHINE_olinuxino-a10s = "A10s-OLinuXino-Micro_config"
+UBOOT_MACHINE_meleg = "Mele_A1000G_config"
+
+SRC_URI = " \
+	git://github.com/linux-sunxi/u-boot-sunxi.git;protocol=git;branch=sunxi \
+	file://0002-gcc5-fixes.patch \
+	"
+
+PE = "1"
+
+PV = "v2014.04+git${SRCPV}"
+# Corresponds 2014.04 in Makefile
+SRCREV = "ea1ac32bf76eb60baef474c2516fc431b381d952"
+
+S = "${WORKDIR}/git"
+
+PACKAGE_ARCH = "${MACHINE_ARCH}"
+
+SPL_BINARY="u-boot-sunxi-with-spl.bin"
--- a/recipes-bsp/u-boot/u-boot-sunxi/0002-gcc5-fixes.patch
+++ b/recipes-bsp/u-boot/u-boot-sunxi/0002-gcc5-fixes.patch
@ -0,0 +1,197 @@
+From a5e50d6fd7321d0bc60fda2db938c170d09f9dee Mon Sep 17 00:00:00 2001
+From: Trevor Woerner <twoerner@gmail.com>
+Date: Thu, 24 Sep 2015 22:36:02 -0400
+Subject: [PATCH] gcc5 fixes
+
+gcc5 is pickier about inline functions defined in headers.
+
+Signed-off-by: Trevor Woerner <twoerner@gmail.com>
+---
+ arch/arm/include/asm/io.h     | 12 ++++----
+ common/board_f.c              | 18 ++++++------
+ common/main.c                 |  2 +-
+ include/linux/compiler-gcc5.h | 65 +++++++++++++++++++++++++++++++++++++++++++
+ 4 files changed, 81 insertions(+), 16 deletions(-)
+ create mode 100644 include/linux/compiler-gcc5.h
+
+diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h
+index 6a1f05a..2f6925b 100644
+--- a/arch/arm/include/asm/io.h
+++ b/arch/arm/include/asm/io.h
+@@ -75,7 +75,7 @@ static inline phys_addr_t virt_to_phys(void * vaddr)
+ #define __arch_putw(v,a)		(*(volatile unsigned short *)(a) = (v))
+ #define __arch_putl(v,a)		(*(volatile unsigned int *)(a) = (v))
+ 
+-extern inline void __raw_writesb(unsigned long addr, const void *data,
+static inline void __raw_writesb(unsigned long addr, const void *data,
+ 				 int bytelen)
+ {
+ 	uint8_t *buf = (uint8_t *)data;
+@@ -83,7 +83,7 @@ extern inline void __raw_writesb(unsigned long addr, const void *data,
+ 		__arch_putb(*buf++, addr);
+ }
+ 
+-extern inline void __raw_writesw(unsigned long addr, const void *data,
+static inline void __raw_writesw(unsigned long addr, const void *data,
+ 				 int wordlen)
+ {
+ 	uint16_t *buf = (uint16_t *)data;
+@@ -91,7 +91,7 @@ extern inline void __raw_writesw(unsigned long addr, const void *data,
+ 		__arch_putw(*buf++, addr);
+ }
+ 
+-extern inline void __raw_writesl(unsigned long addr, const void *data,
+static inline void __raw_writesl(unsigned long addr, const void *data,
+ 				 int longlen)
+ {
+ 	uint32_t *buf = (uint32_t *)data;
+@@ -99,21 +99,21 @@ extern inline void __raw_writesl(unsigned long addr, const void *data,
+ 		__arch_putl(*buf++, addr);
+ }
+ 
+-extern inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
+static inline void __raw_readsb(unsigned long addr, void *data, int bytelen)
+ {
+ 	uint8_t *buf = (uint8_t *)data;
+ 	while(bytelen--)
+ 		*buf++ = __arch_getb(addr);
+ }
+ 
+-extern inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
+static inline void __raw_readsw(unsigned long addr, void *data, int wordlen)
+ {
+ 	uint16_t *buf = (uint16_t *)data;
+ 	while(wordlen--)
+ 		*buf++ = __arch_getw(addr);
+ }
+ 
+-extern inline void __raw_readsl(unsigned long addr, void *data, int longlen)
+static inline void __raw_readsl(unsigned long addr, void *data, int longlen)
+ {
+ 	uint32_t *buf = (uint32_t *)data;
+ 	while(longlen--)
+diff --git a/common/board_f.c b/common/board_f.c
+index f285bad..72b421c 100644
+--- a/common/board_f.c
+++ b/common/board_f.c
+@@ -78,24 +78,24 @@ DECLARE_GLOBAL_DATA_PTR;
+  ************************************************************************
+  * May be supplied by boards if desired
+  */
+-inline void __coloured_LED_init(void) {}
+void __coloured_LED_init(void) {}
+ void coloured_LED_init(void)
+ 	__attribute__((weak, alias("__coloured_LED_init")));
+-inline void __red_led_on(void) {}
+void __red_led_on(void) {}
+ void red_led_on(void) __attribute__((weak, alias("__red_led_on")));
+-inline void __red_led_off(void) {}
+void __red_led_off(void) {}
+ void red_led_off(void) __attribute__((weak, alias("__red_led_off")));
+-inline void __green_led_on(void) {}
+void __green_led_on(void) {}
+ void green_led_on(void) __attribute__((weak, alias("__green_led_on")));
+-inline void __green_led_off(void) {}
+void __green_led_off(void) {}
+ void green_led_off(void) __attribute__((weak, alias("__green_led_off")));
+-inline void __yellow_led_on(void) {}
+void __yellow_led_on(void) {}
+ void yellow_led_on(void) __attribute__((weak, alias("__yellow_led_on")));
+-inline void __yellow_led_off(void) {}
+void __yellow_led_off(void) {}
+ void yellow_led_off(void) __attribute__((weak, alias("__yellow_led_off")));
+-inline void __blue_led_on(void) {}
+void __blue_led_on(void) {}
+ void blue_led_on(void) __attribute__((weak, alias("__blue_led_on")));
+-inline void __blue_led_off(void) {}
+void __blue_led_off(void) {}
+ void blue_led_off(void) __attribute__((weak, alias("__blue_led_off")));
+ 
+ /*
+diff --git a/common/main.c b/common/main.c
+index 8b6f274..3312b90 100644
+--- a/common/main.c
+++ b/common/main.c
+@@ -27,7 +27,7 @@ DECLARE_GLOBAL_DATA_PTR;
+ /*
+  * Board-specific Platform code can reimplement show_boot_progress () if needed
+  */
+-void inline __show_boot_progress (int val) {}
+void __show_boot_progress (int val) {}
+ void show_boot_progress (int val) __attribute__((weak, alias("__show_boot_progress")));
+ 
+ #define MAX_DELAY_STOP_STR 32
+diff --git a/include/linux/compiler-gcc5.h b/include/linux/compiler-gcc5.h
+new file mode 100644
+index 0000000..c8c5659
+--- /dev/null
+++ b/include/linux/compiler-gcc5.h
+@@ -0,0 +1,65 @@
+#ifndef __LINUX_COMPILER_H
+#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
+#endif
+
+#define __used				__attribute__((__used__))
+#define __must_check			__attribute__((warn_unused_result))
+#define __compiler_offsetof(a, b)	__builtin_offsetof(a, b)
+
+/* Mark functions as cold. gcc will assume any path leading to a call
+   to them will be unlikely.  This means a lot of manual unlikely()s
+   are unnecessary now for any paths leading to the usual suspects
+   like BUG(), printk(), panic() etc. [but let's keep them for now for
+   older compilers]
+
+   Early snapshots of gcc 4.3 don't support this and we can't detect this
+   in the preprocessor, but we can live with this because they're unreleased.
+   Maketime probing would be overkill here.
+
+   gcc also has a __attribute__((__hot__)) to move hot functions into
+   a special section, but I don't see any sense in this right now in
+   the kernel context */
+#define __cold			__attribute__((__cold__))
+
+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
+
+#ifndef __CHECKER__
+# define __compiletime_warning(message) __attribute__((warning(message)))
+# define __compiletime_error(message) __attribute__((error(message)))
+#endif /* __CHECKER__ */
+
+/*
+ * Mark a position in code as unreachable.  This can be used to
+ * suppress control flow warnings after asm blocks that transfer
+ * control elsewhere.
+ *
+ * Early snapshots of gcc 4.5 don't support this and we can't detect
+ * this in the preprocessor, but we can live with this because they're
+ * unreleased.  Really, we need to have autoconf for the kernel.
+ */
+#define unreachable() __builtin_unreachable()
+
+/* Mark a function definition as prohibited from being cloned. */
+#define __noclone	__attribute__((__noclone__))
+
+/*
+ * Tell the optimizer that something else uses this function or variable.
+ */
+#define __visible __attribute__((externally_visible))
+
+/*
+ * GCC 'asm goto' miscompiles certain code sequences:
+ *
+ *   http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
+ *
+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
+ *
+ * (asm goto is automatically volatile - the naming reflects this.)
+ */
+#define asm_volatile_goto(x...)	do { asm goto(x); asm (""); } while (0)
+
+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
+#define __HAVE_BUILTIN_BSWAP32__
+#define __HAVE_BUILTIN_BSWAP64__
+#define __HAVE_BUILTIN_BSWAP16__
+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
+-- 
+2.6.0.rc3
+
--- a/recipes-bsp/u-boot/u-boot.inc
+++ b/recipes-bsp/u-boot/u-boot.inc
@ -1,97 +0,0 @@
-DESCRIPTION = "U-Boot - the Universal Boot Loader"
-HOMEPAGE = "http://www.denx.de/wiki/U-Boot/WebHome"
-SECTION = "bootloaders"
-PROVIDES = "virtual/bootloader"
-
-inherit deploy
-
-EXTRA_OEMAKE = 'CROSS_COMPILE=${TARGET_PREFIX} CC="${TARGET_PREFIX}gcc ${TOOLCHAIN_OPTIONS}"'
-
-python () {
-	if not d.getVar("UBOOT_MACHINE", True):
-		PN = d.getVar("PN", True)
-		FILE = os.path.basename(d.getVar("FILE", True))
-		bb.debug(1, "To build %s, see %s for instructions on \
-			     setting up your machine config" % (PN, FILE))
-		raise bb.parse.SkipPackage("because UBOOT_MACHINE is not set")
-}
-
-# Allow setting an additional version string that will be picked up by the
-# u-boot build system and appended to the u-boot version.  If the .scmversion
-# file already exists it will not be overwritten.
-UBOOT_LOCALVERSION ?= ""
-
-# Some versions of u-boot use .bin and others use .img.  By default use .bin
-# but enable individual recipes to change this value.
-UBOOT_SUFFIX ?= "bin"
-UBOOT_IMAGE ?= "u-boot-${MACHINE}-${PV}-${PR}.${UBOOT_SUFFIX}"
-UBOOT_BINARY ?= "u-boot.${UBOOT_SUFFIX}"
-UBOOT_SYMLINK ?= "u-boot-${MACHINE}.${UBOOT_SUFFIX}"
-UBOOT_MAKE_TARGET ?= "all"
-
-# Some versions of u-boot build an SPL (Second Program Loader) image that
-# should be packaged along with the u-boot binary as well as placed in the
-# deploy directory.  For those versions they can set the following variables
-# to allow packaging the SPL.
-SPL_BINARY ?= ""
-SPL_IMAGE ?= "${SPL_BINARY}-${MACHINE}-${PV}-${PR}"
-SPL_SYMLINK ?= "${SPL_BINARY}-${MACHINE}"
-
-do_compile () {
-	if [ "${@base_contains('DISTRO_FEATURES', 'ld-is-gold', 'ld-is-gold', '', d)}" = "ld-is-gold" ] ; then
-		sed -i 's/$(CROSS_COMPILE)ld$/$(CROSS_COMPILE)ld.bfd/g' config.mk
-	fi
-
-	unset LDFLAGS
-	unset CFLAGS
-	unset CPPFLAGS
-
-	if [ ! -e ${B}/.scmversion -a ! -e ${S}/.scmversion ]
-	then
-		echo ${UBOOT_LOCALVERSION} > ${B}/.scmversion
-		echo ${UBOOT_LOCALVERSION} > ${S}/.scmversion
-	fi
-
-	oe_runmake ${UBOOT_MACHINE}
-	oe_runmake ${UBOOT_MAKE_TARGET}
-}
-
-do_install () {
-    install -d ${D}/boot
-    install ${S}/${UBOOT_BINARY} ${D}/boot/${UBOOT_IMAGE}
-    ln -sf ${UBOOT_IMAGE} ${D}/boot/${UBOOT_BINARY}
-
-    if [ -e ${WORKDIR}/fw_env.config ] ; then
-        install -d ${D}${sysconfdir}
-        install -m 644 ${WORKDIR}/fw_env.config ${D}${sysconfdir}/fw_env.config
-    fi
-
-    if [ "x${SPL_BINARY}" != "x" ]
-    then
-        install ${S}/${SPL_BINARY} ${D}/boot/${SPL_IMAGE}
-        ln -sf ${SPL_IMAGE} ${D}/boot/${SPL_BINARY}
-    fi
-}
-
-FILES_${PN} = "/boot ${sysconfdir}"
-FILESPATH =. "${FILE_DIRNAME}/u-boot-git/${MACHINE}:"
-
-do_deploy () {
-    install -d ${DEPLOYDIR}
-    install ${S}/${UBOOT_BINARY} ${DEPLOYDIR}/${UBOOT_IMAGE}
-
-    cd ${DEPLOYDIR}
-    rm -f ${UBOOT_BINARY} ${UBOOT_SYMLINK}
-    ln -sf ${UBOOT_IMAGE} ${UBOOT_SYMLINK}
-    ln -sf ${UBOOT_IMAGE} ${UBOOT_BINARY}
-
-    if [ "x${SPL_BINARY}" != "x" ]
-    then
-        install ${S}/${SPL_BINARY} ${DEPLOYDIR}/${SPL_IMAGE}
-        rm -f ${DEPLOYDIR}/${SPL_BINARY} ${DEPLOYDIR}/${SPL_SYMLINK}
-        ln -sf ${SPL_IMAGE} ${DEPLOYDIR}/${SPL_BINARY}
-        ln -sf ${SPL_IMAGE} ${DEPLOYDIR}/${SPL_SYMLINK}
-    fi
-}
-
-addtask deploy before do_build after do_compile
--- a/recipes-bsp/u-boot/u-boot_2015.10.bb
+++ b/recipes-bsp/u-boot/u-boot_2015.10.bb
@ -0,0 +1,44 @@
+DESCRIPTION="Upstream's U-boot configured for sunxi devices"
+
+require recipes-bsp/u-boot/u-boot.inc
+
+DEPENDS += "dtc-native"
+
+LICENSE = "GPLv2"
+
+LIC_FILES_CHKSUM = "\
+file://Licenses/Exceptions;md5=338a7cb1e52d0d1951f83e15319a3fe7 \
+file://Licenses/bsd-2-clause.txt;md5=6a31f076f5773aabd8ff86191ad6fdd5 \
+file://Licenses/bsd-3-clause.txt;md5=4a1190eac56a9db675d58ebe86eaf50c \
+file://Licenses/eCos-2.0.txt;md5=b338cb12196b5175acd3aa63b0a0805c \
+file://Licenses/gpl-2.0.txt;md5=b234ee4d69f5fce4486a80fdaf4a4263 \
+file://Licenses/ibm-pibs.txt;md5=c49502a55e35e0a8a1dc271d944d6dba \
+file://Licenses/isc.txt;md5=ec65f921308235311f34b79d844587eb \
+file://Licenses/lgpl-2.0.txt;md5=5f30f0716dfdd0d91eb439ebec522ec2 \
+file://Licenses/lgpl-2.1.txt;md5=4fbd65380cdd255951079008b364516c \
+file://Licenses/x11.txt;md5=b46f176c847b8742db02126fb8af92e2 \
+"
+
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
+
+DEFAULT_PREFERENCE_sun4i="1"
+DEFAULT_PREFERENCE_sun5i="1"
+DEFAULT_PREFERENCE_sun7i="1"
+
+SRC_URI += "file://boot.cmd \
+"
+
+SRCREV = "5ec0003b19cbdf06ccd6941237cbc0d1c3468e2d"
+
+PV = "v2015.10${SRCPV}"
+
+PE = "1"
+
+SPL_BINARY="u-boot-sunxi-with-spl.bin"
+
+UBOOT_ENV_SUFFIX = "scr"
+UBOOT_ENV = "boot"
+
+do_compile_append() {
+    ${S}/tools/mkimage -C none -A arm -T script -d ${WORKDIR}/boot.cmd ${WORKDIR}/${UBOOT_ENV_BINARY}
+}
--- a/recipes-bsp/u-boot/u-boot_git.bb
+++ b/recipes-bsp/u-boot/u-boot_git.bb
@ -1,33 +0,0 @@
-require u-boot.inc
-
-LICENSE = "GPLv2"
-LIC_FILES_CHKSUM = "file://Licenses/gpl-2.0.txt;md5=b234ee4d69f5fce4486a80fdaf4a4263"
-
-# No patches for other machines yet
-COMPATIBLE_MACHINE = "(mele|meleg|olinuxino-a13|olinuxino-a10s|olinuxino-a10|olinuxino-a20|olinuxino-a20som|olinuxino-a20lime|cubieboard|cubieboard2|cubietruck)"
-
-DEFAULT_PREFERENCE_mele= "1"
-DEFAULT_PREFERENCE_meleg= "1"
-DEFAULT_PREFERENCE_olinuxino-a13= "1"
-DEFAULT_PREFERENCE_olinuxino-a10s= "1"
-DEFAULT_PREFERENCE_olinuxino-a10= "1"
-DEFAULT_PREFERENCE_olinuxino-a20= "1"
-DEFAULT_PREFERENCE_olinuxino-a20som= "1"
-DEFAULT_PREFERENCE_olinuxino-a20lime= "1"
-DEFAULT_PREFERENCE_cubieboard="1"
-DEFAULT_PREFERENCE_cubieboard2="1"
-DEFAULT_PREFERENCE_cubietruck="1"
-
-SRC_URI = "git://github.com/linux-sunxi/u-boot-sunxi.git;protocol=git;branch=sunxi"
-
-PE = "1"
-PV = "v2014.04+git${SRCPV}"
-SRCREV = "ee425f94b488a4304c136a171bb8fdec0d835032"
-
-
-S = "${WORKDIR}/git"
-
-PACKAGE_ARCH = "${MACHINE_ARCH}"
-
-SPL_BINARY="u-boot-sunxi-with-spl.bin"
-
--- a/recipes-devtools/python/files/olinuxino-a10/mapping.h
+++ b/recipes-devtools/python/files/olinuxino-a10/mapping.h
@ -0,0 +1,221 @@
+/*
+ *
+ * This file is part of pyA10Lime.
+ * mapping.h is python GPIO extension.
+ *
+ * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
+ *
+ * pyA10Lime is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MAPPING_H
+#define __MAPPING_H
+
+#include "gpio_lib.h"
+
+/**
+Structure that describe all gpio
+*/
+typedef struct _pin {
+    char name[10];          // The processor pin
+    int offset;             // Memory offset for the pin
+    int pin_number;         // Number on the connector
+}pin_t;
+
+typedef struct _gpio {
+    char connector_name[10];
+    pin_t pins[41];
+}gpio_t;
+
+
+gpio_t gpio[] = {
+    {"lcd",
+        {
+            {   "PD16", SUNXI_GPD(16),  5   },
+            {   "PD17", SUNXI_GPD(17),  6   },
+            {   "PD18", SUNXI_GPD(18),  7   },
+            {   "PD19", SUNXI_GPD(19),  8   },
+            {   "PD20", SUNXI_GPD(20),  9   },
+            {   "PD21", SUNXI_GPD(21),  10  },
+            {   "PD22", SUNXI_GPD(22),  11  },
+            {   "PD23", SUNXI_GPD(23),  12  },
+            {   "PD8",  SUNXI_GPD(8),   13  },
+            {   "PD9",  SUNXI_GPD(9),   14  },
+            {   "PD10", SUNXI_GPD(10),  15  },
+            {   "PD11", SUNXI_GPD(11),  16  },
+            {   "PD12", SUNXI_GPD(12),  17  },
+            {   "PD13", SUNXI_GPD(13),  18  },
+            {   "PD14", SUNXI_GPD(14),  19  },
+            {   "PD15", SUNXI_GPD(15),  20  },
+            {   "PD0",  SUNXI_GPD(0),   21  },
+            {   "PD1",  SUNXI_GPD(1),   22  },
+            {   "PD2",  SUNXI_GPD(2),   23  },
+            {   "PD3",  SUNXI_GPD(3),   24  },
+            {   "PD4",  SUNXI_GPD(4),   25  },
+            {   "PD5",  SUNXI_GPD(5),   26  },
+            {   "PD6",  SUNXI_GPD(6),   27  },
+            {   "PD7",  SUNXI_GPD(7),   28  },
+            {   "PD26", SUNXI_GPD(26),  29  },
+            {   "PD27", SUNXI_GPD(27),  30  },
+            {   "PD24", SUNXI_GPD(24),  31  },
+            {   "PD25", SUNXI_GPD(25),  32  },
+            {   "PH8",  SUNXI_GPH(8),   35  },
+            {   "PB2",  SUNXI_GPB(2),   36  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio1",
+        {
+            {   "PG0",  SUNXI_GPG(0),   5   },
+            {   "PG1",  SUNXI_GPG(1),   7   },
+            {   "PG2",  SUNXI_GPG(2),   9   },
+            {   "PG3",  SUNXI_GPG(3),   11  },
+            {   "PG4",  SUNXI_GPG(4),   13  },
+            {   "PG5",  SUNXI_GPG(5),   15  },
+            {   "PG6",  SUNXI_GPG(6),   17  },
+            {   "PG7",  SUNXI_GPG(7),   19  },
+            {   "PG8",  SUNXI_GPG(8),   21  },
+            {   "PG9",  SUNXI_GPG(9),   23  },
+            {   "PG10", SUNXI_GPG(10),  25  },
+            {   "PG11", SUNXI_GPG(11),  27  },
+            {   "PC3",  SUNXI_GPC(3),   29  },
+            {   "PC18", SUNXI_GPC(18),  31  },
+            {   "PC19", SUNXI_GPC(19),  33  },
+            {   "PC20", SUNXI_GPC(20),  35  },
+            {   "PC21", SUNXI_GPC(21),  37  },
+            {   "PC22", SUNXI_GPC(22),  39  },
+            {   "PC23", SUNXI_GPC(23),  40  },
+            {   "PC24", SUNXI_GPC(24),  38  },
+            {   "PB18", SUNXI_GPB(18),  36  },
+            {   "PB19", SUNXI_GPB(19),  34  },
+            {   "PB20", SUNXI_GPB(20),  32  },
+            {   "PB21", SUNXI_GPB(21),  30  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio2",
+        {
+            {   "PI0",  SUNXI_GPI(0),   9   },
+            {   "PI1",  SUNXI_GPI(1),   11  },
+            {   "PI2",  SUNXI_GPI(2),   13  },
+            {   "PI3",  SUNXI_GPI(3),   15  },
+            {   "PI4",  SUNXI_GPI(4),   17  },
+            {   "PI5",  SUNXI_GPI(5),   19  },
+            {   "PI6",  SUNXI_GPI(6),   21  },
+            {   "PI7",  SUNXI_GPI(7),   23  },
+            {   "PI8",  SUNXI_GPI(8),   25  },
+            {   "PI9",  SUNXI_GPI(9),   27  },
+            {   "PI10", SUNXI_GPI(10),  29  },
+            {   "PI11", SUNXI_GPI(11),  31  },
+            {   "PI12", SUNXI_GPI(12),  33  },
+            {   "PI13", SUNXI_GPI(13),  35  },
+            {   "PI14", SUNXI_GPI(14),  37  },
+            {   "PI15", SUNXI_GPI(15),  39  },
+            {   "PI16", SUNXI_GPI(16),  40  },
+            {   "PI17", SUNXI_GPI(17),  38  },
+            {   "PI18", SUNXI_GPI(18),  36  },
+            {   "PI19", SUNXI_GPI(19),  34  },
+            {   "PI20", SUNXI_GPI(20),  32  },
+            {   "PI21", SUNXI_GPI(21),  30  },
+            {   "PE0",  SUNXI_GPE(0),   6   },
+            {   "PE1",  SUNXI_GPE(1),   8   },
+            {   "PE2",  SUNXI_GPE(2),   10  },
+            {   "PE3",  SUNXI_GPE(3),   12  },
+            {   "PE4",  SUNXI_GPE(4),   14  },
+            {   "PE5",  SUNXI_GPE(5),   16  },
+            {   "PE6",  SUNXI_GPE(6),   18  },
+            {   "PE7",  SUNXI_GPE(7),   20  },
+            {   "PE8",  SUNXI_GPE(8),   22  },
+            {   "PE9",  SUNXI_GPE(9),   24  },
+            {   "PE10", SUNXI_GPE(10),  26  },
+            {   "PE11", SUNXI_GPE(11),  28  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio3",
+        {
+            {   "PH0",  SUNXI_GPH(0),   7   },
+            {   "PH7",  SUNXI_GPH(7),   9   },
+            {   "PH9",  SUNXI_GPH(9),   11  },
+            {   "PH10", SUNXI_GPH(10),  13  },
+            {   "PH11", SUNXI_GPH(11),  15  },
+            {   "PH12", SUNXI_GPH(12),  17  },
+            {   "PH13", SUNXI_GPH(13),  19  },
+            {   "PH14", SUNXI_GPH(14),  21  },
+            {   "PH15", SUNXI_GPH(15),  23  },
+            {   "PH16", SUNXI_GPH(16),  25  },
+            {   "PH17", SUNXI_GPH(17),  27  },
+            {   "PH18", SUNXI_GPH(18),  29  },
+            {   "PH19", SUNXI_GPH(19),  31  },
+            {   "PH20", SUNXI_GPH(20),  33  },
+            {   "PH21", SUNXI_GPH(21),  35  },
+            {   "PH22", SUNXI_GPH(22),  37  },
+            {   "PH23", SUNXI_GPH(23),  39  },
+            {   "PH24", SUNXI_GPH(24),  34  },
+            {   "PH25", SUNXI_GPH(25),  36  },
+            {   "PH26", SUNXI_GPH(26),  38  },
+            {   "PH27", SUNXI_GPH(27),  40  },
+            {   "PB3",  SUNXI_GPB(3),   6   },
+            {   "PB4",  SUNXI_GPB(4),   8   },
+            {   "PB5",  SUNXI_GPB(5),   10  },
+            {   "PB6",  SUNXI_GPB(6),   12  },
+            {   "PB7",  SUNXI_GPB(7),   14  },
+            {   "PB8",  SUNXI_GPB(8),   16  },
+            {   "PB10", SUNXI_GPB(10),  18  },
+            {   "PB11", SUNXI_GPB(11),  20  },
+            {   "PB12", SUNXI_GPB(12),  22  },
+            {   "PB13", SUNXI_GPB(13),  24  },
+            {   "PB14", SUNXI_GPB(14),  26  },
+            {   "PB15", SUNXI_GPB(15),  28  },
+            {   "PB16", SUNXI_GPB(16),  30  },
+            {   "PB17", SUNXI_GPB(17),  32  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio4",
+        {
+            {   "PC7",  SUNXI_GPC(7),   16  },
+            {   "PC16", SUNXI_GPC(16),  18  },
+            {   "PC17", SUNXI_GPC(17),  20  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"led",
+        {
+            {   "PH2",  SUNXI_GPH(2),   1},
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+};
+
+#endif
--- a/recipes-devtools/python/files/olinuxino-a10lime/mapping.h
+++ b/recipes-devtools/python/files/olinuxino-a10lime/mapping.h
@ -0,0 +1,221 @@
+/*
+ *
+ * This file is part of pyA10Lime.
+ * mapping.h is python GPIO extension.
+ *
+ * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
+ *
+ * pyA10Lime is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MAPPING_H
+#define __MAPPING_H
+
+#include "gpio_lib.h"
+
+/**
+Structure that describe all gpio
+*/
+typedef struct _pin {
+    char name[10];          // The processor pin
+    int offset;             // Memory offset for the pin
+    int pin_number;         // Number on the connector
+}pin_t;
+
+typedef struct _gpio {
+    char connector_name[10];
+    pin_t pins[41];
+}gpio_t;
+
+
+gpio_t gpio[] = {
+    {"lcd",
+        {
+            {   "PD16", SUNXI_GPD(16),  5   },
+            {   "PD17", SUNXI_GPD(17),  6   },
+            {   "PD18", SUNXI_GPD(18),  7   },
+            {   "PD19", SUNXI_GPD(19),  8   },
+            {   "PD20", SUNXI_GPD(20),  9   },
+            {   "PD21", SUNXI_GPD(21),  10  },
+            {   "PD22", SUNXI_GPD(22),  11  },
+            {   "PD23", SUNXI_GPD(23),  12  },
+            {   "PD8",  SUNXI_GPD(8),   13  },
+            {   "PD9",  SUNXI_GPD(9),   14  },
+            {   "PD10", SUNXI_GPD(10),  15  },
+            {   "PD11", SUNXI_GPD(11),  16  },
+            {   "PD12", SUNXI_GPD(12),  17  },
+            {   "PD13", SUNXI_GPD(13),  18  },
+            {   "PD14", SUNXI_GPD(14),  19  },
+            {   "PD15", SUNXI_GPD(15),  20  },
+            {   "PD0",  SUNXI_GPD(0),   21  },
+            {   "PD1",  SUNXI_GPD(1),   22  },
+            {   "PD2",  SUNXI_GPD(2),   23  },
+            {   "PD3",  SUNXI_GPD(3),   24  },
+            {   "PD4",  SUNXI_GPD(4),   25  },
+            {   "PD5",  SUNXI_GPD(5),   26  },
+            {   "PD6",  SUNXI_GPD(6),   27  },
+            {   "PD7",  SUNXI_GPD(7),   28  },
+            {   "PD26", SUNXI_GPD(26),  29  },
+            {   "PD27", SUNXI_GPD(27),  30  },
+            {   "PD24", SUNXI_GPD(24),  31  },
+            {   "PD25", SUNXI_GPD(25),  32  },
+            {   "PH8",  SUNXI_GPH(8),   35  },
+            {   "PB2",  SUNXI_GPB(2),   36  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio1",
+        {
+            {   "PG0",  SUNXI_GPG(0),   5   },
+            {   "PG1",  SUNXI_GPG(1),   7   },
+            {   "PG2",  SUNXI_GPG(2),   9   },
+            {   "PG3",  SUNXI_GPG(3),   11  },
+            {   "PG4",  SUNXI_GPG(4),   13  },
+            {   "PG5",  SUNXI_GPG(5),   15  },
+            {   "PG6",  SUNXI_GPG(6),   17  },
+            {   "PG7",  SUNXI_GPG(7),   19  },
+            {   "PG8",  SUNXI_GPG(8),   21  },
+            {   "PG9",  SUNXI_GPG(9),   23  },
+            {   "PG10", SUNXI_GPG(10),  25  },
+            {   "PG11", SUNXI_GPG(11),  27  },
+            {   "PC3",  SUNXI_GPC(3),   29  },
+            {   "PC18", SUNXI_GPC(18),  31  },
+            {   "PC19", SUNXI_GPC(19),  33  },
+            {   "PC20", SUNXI_GPC(20),  35  },
+            {   "PC21", SUNXI_GPC(21),  37  },
+            {   "PC22", SUNXI_GPC(22),  39  },
+            {   "PC23", SUNXI_GPC(23),  40  },
+            {   "PC24", SUNXI_GPC(24),  38  },
+            {   "PB18", SUNXI_GPB(18),  36  },
+            {   "PB19", SUNXI_GPB(19),  34  },
+            {   "PB20", SUNXI_GPB(20),  32  },
+            {   "PB21", SUNXI_GPB(21),  30  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio2",
+        {
+            {   "PI0",  SUNXI_GPI(0),   9   },
+            {   "PI1",  SUNXI_GPI(1),   11  },
+            {   "PI2",  SUNXI_GPI(2),   13  },
+            {   "PI3",  SUNXI_GPI(3),   15  },
+            {   "PI4",  SUNXI_GPI(4),   17  },
+            {   "PI5",  SUNXI_GPI(5),   19  },
+            {   "PI6",  SUNXI_GPI(6),   21  },
+            {   "PI7",  SUNXI_GPI(7),   23  },
+            {   "PI8",  SUNXI_GPI(8),   25  },
+            {   "PI9",  SUNXI_GPI(9),   27  },
+            {   "PI10", SUNXI_GPI(10),  29  },
+            {   "PI11", SUNXI_GPI(11),  31  },
+            {   "PI12", SUNXI_GPI(12),  33  },
+            {   "PI13", SUNXI_GPI(13),  35  },
+            {   "PI14", SUNXI_GPI(14),  37  },
+            {   "PI15", SUNXI_GPI(15),  39  },
+            {   "PI16", SUNXI_GPI(16),  40  },
+            {   "PI17", SUNXI_GPI(17),  38  },
+            {   "PI18", SUNXI_GPI(18),  36  },
+            {   "PI19", SUNXI_GPI(19),  34  },
+            {   "PI20", SUNXI_GPI(20),  32  },
+            {   "PI21", SUNXI_GPI(21),  30  },
+            {   "PE0",  SUNXI_GPE(0),   6   },
+            {   "PE1",  SUNXI_GPE(1),   8   },
+            {   "PE2",  SUNXI_GPE(2),   10  },
+            {   "PE3",  SUNXI_GPE(3),   12  },
+            {   "PE4",  SUNXI_GPE(4),   14  },
+            {   "PE5",  SUNXI_GPE(5),   16  },
+            {   "PE6",  SUNXI_GPE(6),   18  },
+            {   "PE7",  SUNXI_GPE(7),   20  },
+            {   "PE8",  SUNXI_GPE(8),   22  },
+            {   "PE9",  SUNXI_GPE(9),   24  },
+            {   "PE10", SUNXI_GPE(10),  26  },
+            {   "PE11", SUNXI_GPE(11),  28  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio3",
+        {
+            {   "PH0",  SUNXI_GPH(0),   7   },
+            {   "PH7",  SUNXI_GPH(7),   9   },
+            {   "PH9",  SUNXI_GPH(9),   11  },
+            {   "PH10", SUNXI_GPH(10),  13  },
+            {   "PH11", SUNXI_GPH(11),  15  },
+            {   "PH12", SUNXI_GPH(12),  17  },
+            {   "PH13", SUNXI_GPH(13),  19  },
+            {   "PH14", SUNXI_GPH(14),  21  },
+            {   "PH15", SUNXI_GPH(15),  23  },
+            {   "PH16", SUNXI_GPH(16),  25  },
+            {   "PH17", SUNXI_GPH(17),  27  },
+            {   "PH18", SUNXI_GPH(18),  29  },
+            {   "PH19", SUNXI_GPH(19),  31  },
+            {   "PH20", SUNXI_GPH(20),  33  },
+            {   "PH21", SUNXI_GPH(21),  35  },
+            {   "PH22", SUNXI_GPH(22),  37  },
+            {   "PH23", SUNXI_GPH(23),  39  },
+            {   "PH24", SUNXI_GPH(24),  34  },
+            {   "PH25", SUNXI_GPH(25),  36  },
+            {   "PH26", SUNXI_GPH(26),  38  },
+            {   "PH27", SUNXI_GPH(27),  40  },
+            {   "PB3",  SUNXI_GPB(3),   6   },
+            {   "PB4",  SUNXI_GPB(4),   8   },
+            {   "PB5",  SUNXI_GPB(5),   10  },
+            {   "PB6",  SUNXI_GPB(6),   12  },
+            {   "PB7",  SUNXI_GPB(7),   14  },
+            {   "PB8",  SUNXI_GPB(8),   16  },
+            {   "PB10", SUNXI_GPB(10),  18  },
+            {   "PB11", SUNXI_GPB(11),  20  },
+            {   "PB12", SUNXI_GPB(12),  22  },
+            {   "PB13", SUNXI_GPB(13),  24  },
+            {   "PB14", SUNXI_GPB(14),  26  },
+            {   "PB15", SUNXI_GPB(15),  28  },
+            {   "PB16", SUNXI_GPB(16),  30  },
+            {   "PB17", SUNXI_GPB(17),  32  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio4",
+        {
+            {   "PC7",  SUNXI_GPC(7),   16  },
+            {   "PC16", SUNXI_GPC(16),  18  },
+            {   "PC17", SUNXI_GPC(17),  20  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"led",
+        {
+            {   "PH2",  SUNXI_GPH(2),   1},
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+};
+
+#endif
--- a/recipes-devtools/python/files/olinuxino-a13/mapping.h
+++ b/recipes-devtools/python/files/olinuxino-a13/mapping.h
@ -0,0 +1,146 @@
+/*
+ *
+ * This file is part of pyA13.
+ * mapping.h is python GPIO extension.
+ *
+ * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
+ *
+ * pyA13 is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MAPPING_H
+#define __MAPPING_H
+
+#include "gpio_lib.h"
+
+/**
+Structure that describe all gpio
+*/
+typedef struct _pin {
+    char name[10];          // The processor pin
+    int offset;             // Memory offset for the pin
+    int pin_number;         // Number on the connector
+}pin_t;
+
+typedef struct _gpio {
+    char connector_name[10];
+    pin_t pins[41];
+}gpio_t;
+
+
+gpio_t gpio[] = {
+    {"lcd",
+        {
+                {   "PD18", SUNXI_GPD(18),  5   },
+                {   "PD18", SUNXI_GPD(18),  6   },
+                {   "PD18", SUNXI_GPD(18),  7   },
+                {   "PD19", SUNXI_GPD(19),  8   },
+                {   "PD20", SUNXI_GPD(20),  9   },
+                {   "PD21", SUNXI_GPD(21),  10  },
+                {   "PD22", SUNXI_GPD(22),  11  },
+                {   "PD23", SUNXI_GPD(23),  12  },
+                {   "PD10", SUNXI_GPD(10),  13  },
+                {   "PD10", SUNXI_GPD(10),  14  },
+                {   "PD10", SUNXI_GPD(10),  15  },
+                {   "PD11", SUNXI_GPD(11),  16  },
+                {   "PD12", SUNXI_GPD(12),  17  },
+                {   "PD13", SUNXI_GPD(13),  18  },
+                {   "PD14", SUNXI_GPD(14),  19  },
+                {   "PD15", SUNXI_GPD(15),  20  },
+                {   "PD2",  SUNXI_GPD(2),   21  },
+                {   "PD2",  SUNXI_GPD(2),   22  },
+                {   "PD2",  SUNXI_GPD(2),   23  },
+                {   "PD3",  SUNXI_GPD(3),   24  },
+                {   "PD4",  SUNXI_GPD(4),   25  },
+                {   "PD5",  SUNXI_GPD(5),   26  },
+                {   "PD6",  SUNXI_GPD(6),   27  },
+                {   "PD7",  SUNXI_GPD(7),   28  },
+                {   "PD26", SUNXI_GPD(26),  29  },
+                {   "PD27", SUNXI_GPD(27),  30  },
+                {   "PD24", SUNXI_GPD(24),  31  },
+                {   "PD25", SUNXI_GPD(25),  32  },
+                {   "PB3",  SUNXI_GPB(3),   33  },
+                {   "PB4",  SUNXI_GPB(4),   34  },
+                {   "PB10", SUNXI_GPB(10),  35  },
+                {   "PB2",  SUNXI_GPB(2),   36  },
+                {
+                    {   0,  0,  0}
+                },
+        }
+    },
+    {"gpio2",
+        {
+            {   "PB0",  SUNXI_GPB(0),   5   },
+            {   "PG11", SUNXI_GPG(11),  6   },
+            {   "PB1",  SUNXI_GPB(1),   7   },
+            {   "PG10", SUNXI_GPG(10),  8   },
+            {   "PB2",  SUNXI_GPB(2),   9   },
+            {   "PG9",  SUNXI_GPG(9),   10  },
+            {   "PB3",  SUNXI_GPB(3),   11  },
+            {   "PE11", SUNXI_GPE(11),  12  },
+            {   "PB4",  SUNXI_GPB(4),   13  },
+            {   "PE10", SUNXI_GPE(10),  14  },
+            {   "PB10", SUNXI_GPB(10),  15  },
+            {   "PE9",  SUNXI_GPE(9),   16  },
+            {   "PB15", SUNXI_GPB(15),  17  },
+            {   "PE8",  SUNXI_GPE(8),   18  },
+            {   "PB16", SUNXI_GPB(16),  19  },
+            {   "PE7",  SUNXI_GPE(7),   20  },
+            {   "PC0",  SUNXI_GPC(0),   21  },
+            {   "PE6",  SUNXI_GPE(6),   22  },
+            {   "PC1",  SUNXI_GPC(1),   23  },
+            {   "PE5",  SUNXI_GPE(5),   24  },
+            {   "PC2",  SUNXI_GPC(2),   25  },
+            {   "PE4",  SUNXI_GPE(4),   26  },
+            {   "PC3",  SUNXI_GPC(3),   27  },
+            {   "PC19", SUNXI_GPC(19),  28  },
+            {   "PC4",  SUNXI_GPC(4),   29  },
+            {   "PC15", SUNXI_GPC(15),  30  },
+            {   "PC5",  SUNXI_GPC(5),   31  },
+            {   "PC14", SUNXI_GPC(14),  32  },
+            {   "PC6",  SUNXI_GPC(6),   33  },
+            {   "PC13", SUNXI_GPC(13),  34  },
+            {   "PC7",  SUNXI_GPC(7),   35  },
+            {   "PC12", SUNXI_GPC(12),  36  },
+            {   "PC8",  SUNXI_GPC(8),   37  },
+            {   "PC11", SUNXI_GPC(11),  38  },
+            {   "PC9",  SUNXI_GPC(9),   39  },
+            {   "PC10", SUNXI_GPC(10),  40  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+    {"uext",
+        {
+            {   "PG3",  SUNXI_GPG(3),   3   },
+            {   "PG3",  SUNXI_GPG(4),   4   },
+            {   "PB17", SUNXI_GPB(17),  5   },
+            {   "PB18", SUNXI_GPB(18),  6   },
+            {   "PE3",  SUNXI_GPE(3),   7   },
+            {   "PE2",  SUNXI_GPE(2),   8   },
+            {   "PE1",  SUNXI_GPE(1),   9   },
+            {   "PE0",  SUNXI_GPE(0),   10  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+};
+
+
+
+#endif
--- a/recipes-devtools/python/files/olinuxino-a13som/mapping.h
+++ b/recipes-devtools/python/files/olinuxino-a13som/mapping.h
@ -0,0 +1,147 @@
+/*
+ *
+ * This file is part of pyA13SOM.
+ * mapping.h is python GPIO extension.
+ *
+ * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
+ *
+ * pyA13SOM is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MAPPING_H
+#define __MAPPING_H
+
+#include "gpio_lib.h"
+
+/**
+Structure that describe all gpio
+*/
+typedef struct _pin {
+    char name[10];          // The processor pin
+    int offset;             // Memory offset for the pin
+    int pin_number;         // Number on the connector
+}pin_t;
+
+typedef struct _gpio {
+    char connector_name[10];
+    pin_t pins[41];
+}gpio_t;
+
+
+gpio_t gpio[] = {
+    {"lcd",
+        {
+            {   "PD18", SUNXI_GPD(18),  5   },
+            {   "PD18", SUNXI_GPD(18),  6   },
+            {   "PD18", SUNXI_GPD(18),  7   },
+            {   "PD19", SUNXI_GPD(19),  8   },
+            {   "PD20", SUNXI_GPD(20),  9   },
+            {   "PD21", SUNXI_GPD(21),  10  },
+            {   "PD22", SUNXI_GPD(22),  11  },
+            {   "PD23", SUNXI_GPD(23),  12  },
+            {   "PD10", SUNXI_GPD(10),  13  },
+            {   "PD10", SUNXI_GPD(10),  14  },
+            {   "PD10", SUNXI_GPD(10),  15  },
+            {   "PD11", SUNXI_GPD(11),  16  },
+            {   "PD12", SUNXI_GPD(12),  17  },
+            {   "PD13", SUNXI_GPD(13),  18  },
+            {   "PD14", SUNXI_GPD(14),  19  },
+            {   "PD15", SUNXI_GPD(15),  20  },
+            {   "PD2",  SUNXI_GPD(2),   21  },
+            {   "PD2",  SUNXI_GPD(2),   22  },
+            {   "PD2",  SUNXI_GPD(2),   23  },
+            {   "PD3",  SUNXI_GPD(3),   24  },
+            {   "PD4",  SUNXI_GPD(4),   25  },
+            {   "PD5",  SUNXI_GPD(5),   26  },
+            {   "PD6",  SUNXI_GPD(6),   27  },
+            {   "PD7",  SUNXI_GPD(7),   28  },
+            {   "PD26", SUNXI_GPD(26),  29  },
+            {   "PD27", SUNXI_GPD(27),  30  },
+            {   "PD24", SUNXI_GPD(24),  31  },
+            {   "PD25", SUNXI_GPD(25),  32  },
+            {   "PB3",  SUNXI_GPB(3),   33  },
+            {   "PB4",  SUNXI_GPB(4),   34  },
+            {   "PB10", SUNXI_GPB(10),  35  },
+            {   "PB2",  SUNXI_GPB(2),   36  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+    {"gpio1",
+        {
+            {   "PB0",  SUNXI_GPB(0),   5   },
+            {   "PG11", SUNXI_GPG(11),  6   },
+            {   "PB1",  SUNXI_GPB(1),   7   },
+            {   "PG10", SUNXI_GPG(10),  8   },
+            {   "PB2",  SUNXI_GPB(2),   9   },
+            {   "PG9",  SUNXI_GPG(9),   10  },
+            {   "PB3",  SUNXI_GPB(3),   11  },
+            {   "PE11", SUNXI_GPE(11),  12  },
+            {   "PB4",  SUNXI_GPB(4),   13  },
+            {   "PE10", SUNXI_GPE(10),  14  },
+            {   "PB10", SUNXI_GPB(10),  15  },
+            {   "PE9",  SUNXI_GPE(9),   16  },
+            {   "PB15", SUNXI_GPB(15),  17  },
+            {   "PE8",  SUNXI_GPE(8),   18  },
+            {   "PB16", SUNXI_GPB(16),  19  },
+            {   "PE7",  SUNXI_GPE(7),   20  },
+            {   "PC0",  SUNXI_GPC(0),   21  },
+            {   "PE6",  SUNXI_GPE(6),   22  },
+            {   "PC1",  SUNXI_GPC(1),   23  },
+            {   "PE5",  SUNXI_GPE(5),   24  },
+            {   "PC2",  SUNXI_GPC(2),   25  },
+            {   "PE4",  SUNXI_GPE(4),   26  },
+            {   "PC3",  SUNXI_GPC(3),   27  },
+            {   "PC19", SUNXI_GPC(19),  28  },
+            {   "PC4",  SUNXI_GPC(4),   29  },
+            {   "PC15", SUNXI_GPC(15),  30  },
+            {   "PC5",  SUNXI_GPC(5),   31  },
+            {   "PC14", SUNXI_GPC(14),  32  },
+            {   "PC6",  SUNXI_GPC(6),   33  },
+            {   "PC13", SUNXI_GPC(13),  34  },
+            {   "PC7",  SUNXI_GPC(7),   35  },
+            {   "PC12", SUNXI_GPC(12),  36  },
+            {   "PC8",  SUNXI_GPC(8),   37  },
+            {   "PC11", SUNXI_GPC(11),  38  },
+            {   "PC9",  SUNXI_GPC(9),   39  },
+            {   "PC10", SUNXI_GPC(10),  40  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+    {"gpio3",
+        {
+            {   "PE0",  SUNXI_GPE(0),   1   },
+            {   "PG1",  SUNXI_GPG(1),   2   },
+            {   "PE1",  SUNXI_GPE(1),   3   },
+            {   "PG2",  SUNXI_GPG(2),   4   },
+            {   "PE2",  SUNXI_GPE(2),   5   },
+            {   "PG12", SUNXI_GPG(12),  6   },
+            {   "PE3",  SUNXI_GPE(3),   7   },
+            {   "PB17", SUNXI_GPB(17),  8   },
+            {   "PB18", SUNXI_GPB(18),  10  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+};
+
+
+
+#endif
--- a/recipes-devtools/python/files/olinuxino-a20/mapping.h
+++ b/recipes-devtools/python/files/olinuxino-a20/mapping.h
@ -0,0 +1,303 @@
+/*
+ *
+ * This file is part of pyA20.
+ * mapping.h is python GPIO extension.
+ *
+ * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
+ *
+ * pyA20 is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MAPPING_H
+#define __MAPPING_H
+
+#include "gpio_lib.h"
+
+/**
+Structure that describe all gpio
+*/
+typedef struct _pin {
+    char name[10];          // The processor pin
+    int offset;             // Memory offset for the pin
+    int pin_number;         // Number on the connector
+}pin_t;
+
+typedef struct _gpio {
+    char connector_name[10];
+    pin_t pins[41];
+}gpio_t;
+
+
+gpio_t gpio[] = {
+    {"lcd",
+        {
+                {   "PD16", SUNXI_GPD(16),  5   },
+                {   "PD17", SUNXI_GPD(17),  6   },
+                {   "PD18", SUNXI_GPD(18),  7   },
+                {   "PD19", SUNXI_GPD(19),  8   },
+                {   "PD20", SUNXI_GPD(20),  9   },
+                {   "PD21", SUNXI_GPD(21),  10  },
+                {   "PD22", SUNXI_GPD(22),  11  },
+                {   "PD23", SUNXI_GPD(23),  12  },
+                {   "PD8",  SUNXI_GPD(8),   13  },
+                {   "PD9",  SUNXI_GPD(9),   14  },
+                {   "PD10", SUNXI_GPD(10),  15  },
+                {   "PD11", SUNXI_GPD(11),  16  },
+                {   "PD12", SUNXI_GPD(12),  17  },
+                {   "PD13", SUNXI_GPD(13),  18  },
+                {   "PD14", SUNXI_GPD(14),  19  },
+                {   "PD15", SUNXI_GPD(15),  20  },
+                {   "PD0",  SUNXI_GPD(0),   21  },
+                {   "PD1",  SUNXI_GPD(1),   22  },
+                {   "PD2",  SUNXI_GPD(2),   23  },
+                {   "PD3",  SUNXI_GPD(3),   24  },
+                {   "PD4",  SUNXI_GPD(4),   25  },
+                {   "PD5",  SUNXI_GPD(5),   26  },
+                {   "PD6",  SUNXI_GPD(6),   27  },
+                {   "PD7",  SUNXI_GPD(7),   28  },
+                {   "PD26", SUNXI_GPD(26),  29  },
+                {   "PD27", SUNXI_GPD(27),  30  },
+                {   "PD24", SUNXI_GPD(24),  31  },
+                {   "PD25", SUNXI_GPD(25),  32  },
+                {   "PH8",  SUNXI_GPH(8),    35  },
+                {   "PB2",  SUNXI_GPB(2),   36  },
+                {
+                    {   0,  0,  0}
+                },
+        }
+    },
+    /*
+    #define PIN_PG0		SUNXI_GPG(0)
+#define PIN_PG1		SUNXI_GPG(1)
+#define PIN_PG2		SUNXI_GPG(2)
+#define PIN_PG3		SUNXI_GPG(3)
+#define PIN_PG4		SUNXI_GPG(4)
+#define PIN_PG5		SUNXI_GPG(5)
+#define PIN_PG6		SUNXI_GPG(6)
+#define PIN_PG7		SUNXI_GPG(7)
+#define PIN_PG8		SUNXI_GPG(8)
+#define PIN_PG9		SUNXI_GPG(9)
+#define PIN_PG10	SUNXI_GPG(10)
+#define PIN_PG11	SUNXI_GPG(11)
+*/  {"gpio1",
+        {
+            {   "PG0",  SUNXI_GPG(0),   5   },
+            {   "PG1",  SUNXI_GPG(0),   7   },
+            {   "PG2",  SUNXI_GPG(0),   9   },
+            {   "PG3",  SUNXI_GPG(0),   11  },
+            {   "PG4",  SUNXI_GPG(0),   13  },
+            {   "PG5",  SUNXI_GPG(0),   15  },
+            {   "PG6",  SUNXI_GPG(0),   17  },
+            {   "PG7",  SUNXI_GPG(0),   19  },
+            {   "PG8",  SUNXI_GPG(0),   21  },
+            {   "PG9",  SUNXI_GPG(0),   23  },
+            {   "PG10", SUNXI_GPG(0),   25  },
+            {   "PG11", SUNXI_GPG(0),   27  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    /*
+    //GPIO 2
+#define PIN_PE0		SUNXI_GPE(0)
+#define PIN_PE1		SUNXI_GPE(1)
+#define PIN_PI0		SUNXI_GPI(0)
+#define PIN_PE2		SUNXI_GPE(2)
+#define PIN_PI1		SUNXI_GPI(1)
+#define PIN_PE3		SUNXI_GPE(3)
+#define PIN_PI2		SUNXI_GPI(2)
+#define PIN_PE4		SUNXI_GPE(4)
+#define PIN_PI3		SUNXI_GPI(3)
+#define PIN_PE5		SUNXI_GPE(5)
+#define PIN_PI10	SUNXI_GPI(10)
+#define PIN_PE6		SUNXI_GPE(6)
+#define PIN_PI11	SUNXI_GPI(11)
+#define PIN_PE7		SUNXI_GPE(7)
+#define PIN_PC3		SUNXI_GPC(3)
+#define PIN_PE8		SUNXI_GPE(8)
+#define PIN_PC7		SUNXI_GPC(7)
+#define PIN_PE9		SUNXI_GPE(9)
+#define PIN_PC16	SUNXI_GPC(16)
+#define PIN_PE10	SUNXI_GPE(10)
+#define PIN_PC17	SUNXI_GPC(17)
+#define PIN_PE11	SUNXI_GPE(11)
+#define PIN_PC18	SUNXI_GPC(18)
+#define PIN_PI14	SUNXI_GPI(14)
+#define PIN_PC23	SUNXI_GPC(23)
+#define PIN_PI15	SUNXI_GPI(15)
+#define PIN_PC24	SUNXI_GPC(24)
+#define PIN_PB23	SUNXI_GPB(23)
+#define PIN_PB22	SUNXI_GPB(22)
+*/
+    {"gpio2",
+        {
+            {   "PE0",  SUNXI_GPE(0),   6   },
+            {   "PE1",  SUNXI_GPE(1),   8   },
+            {   "PI0",  SUNXI_GPI(0),   9   },
+            {   "PE2",  SUNXI_GPE(2),   10  },
+            {   "PI1",  SUNXI_GPI(1),   11  },
+            {   "PE3",  SUNXI_GPE(3),   12  },
+            {   "PI2",  SUNXI_GPI(2),   13  },
+            {   "PE4",  SUNXI_GPE(4),   14  },
+            {   "PI3",  SUNXI_GPI(3),   15  },
+            {   "PE5",  SUNXI_GPE(5),   16  },
+            {   "PI10", SUNXI_GPI(10),  17  },
+            {   "PE6",  SUNXI_GPE(6),   18  },
+            {   "PI11", SUNXI_GPI(11),  19  },
+            {   "PE7",  SUNXI_GPE(7),   20  },
+            {   "PC3",  SUNXI_GPC(3),   21  },
+            {   "PE8",  SUNXI_GPE(8),   22  },
+            {   "PC7",  SUNXI_GPC(7),   23  },
+            {   "PE9",  SUNXI_GPE(9),   24  },
+            {   "PC16", SUNXI_GPC(16),  25  },
+            {   "PE10", SUNXI_GPE(10),  26  },
+            {   "PC17", SUNXI_GPC(17),  27  },
+            {   "PE11", SUNXI_GPE(11),  28  },
+            {   "PC18", SUNXI_GPC(18),  29  },
+            {   "PI14", SUNXI_GPI(14),  30  },
+            {   "PC23", SUNXI_GPC(23),  31  },
+            {   "PI15", SUNXI_GPI(15),  32  },
+            {   "PC24", SUNXI_GPC(24),  33  },
+            {   "PB23", SUNXI_GPB(23),  34  },
+            {   "PB22", SUNXI_GPB(22),  36  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+/*
+//GPIO 3
+#define PIN_PH0		SUNXI_GPH(0)
+#define PIN_PB3		SUNXI_GPB(3)
+#define PIN_PH2		SUNXI_GPH(2)
+#define PIN_PB4		SUNXI_GPB(4)
+#define PIN_PH7		SUNXI_GPH(7)
+#define PIN_PB5		SUNXI_GPB(5)
+#define PIN_PH9		SUNXI_GPH(9)
+#define PIN_PB6		SUNXI_GPB(6)
+#define PIN_PH10	SUNXI_GPH(10)
+#define PIN_PB7		SUNXI_GPB(7)
+#define PIN_PH11	SUNXI_GPH(11)
+#define PIN_PB8		SUNXI_GPB(8)
+#define PIN_PH12	SUNXI_GPH(12)
+#define PIN_PB10	SUNXI_GPB(10)
+#define PIN_PH13	SUNXI_GPH(13)
+#define PIN_PB11	SUNXI_GPB(11)
+#define PIN_PH14	SUNXI_GPH(14)
+#define PIN_PB12	SUNXI_GPB(12)
+#define PIN_PH15	SUNXI_GPH(15)
+#define PIN_PB13	SUNXI_GPB(13)
+#define PIN_PH16	SUNXI_GPH(16)
+#define PIN_PB14	SUNXI_GPB(14)
+#define PIN_PH17	SUNXI_GPH(17)
+#define PIN_PB15	SUNXI_GPB(15)
+#define PIN_PH18	SUNXI_GPH(18)
+#define PIN_PB16	SUNXI_GPB(16)
+#define PIN_PH19	SUNXI_GPH(19)
+#define PIN_PB17	SUNXI_GPB(17)
+#define PIN_PH20	SUNXI_GPH(20)
+#define PIN_PH24	SUNXI_GPH(24)
+#define PIN_PH21	SUNXI_GPH(21)
+#define PIN_PH25	SUNXI_GPH(25)
+#define PIN_PH22	SUNXI_GPH(22)
+#define PIN_PH26	SUNXI_GPH(26)
+#define PIN_PH23	SUNXI_GPH(23)
+#define PIN_PH27	SUNXI_GPH(27)
+*/
+    {"gpio3",
+        {
+            {   "PH0",  SUNXI_GPH(0),   5   },
+            {   "PB3",  SUNXI_GPB(3),   6   },
+            {   "PH2",  SUNXI_GPH(2),   7   },
+            {   "PB4",  SUNXI_GPB(4),   8   },
+            {   "PH7",  SUNXI_GPH(7),   9   },
+            {   "PB5",  SUNXI_GPB(5),   10  },
+            {   "PH9",  SUNXI_GPH(9),   11  },
+            {   "PB6",  SUNXI_GPB(6),   12  },
+            {   "PH10", SUNXI_GPH(10),  13  },
+            {   "PB7",  SUNXI_GPB(7),   14  },
+            {   "PH11", SUNXI_GPH(11),  15  },
+            {   "PB8",  SUNXI_GPB(8),   16  },
+            {   "PH12", SUNXI_GPH(12),  17  },
+            {   "PB10", SUNXI_GPB(10),  18  },
+            {   "PH13", SUNXI_GPH(13),  19  },
+            {   "PB11", SUNXI_GPB(11),  20  },
+            {   "PH14", SUNXI_GPH(14),  21  },
+            {   "PB12", SUNXI_GPB(12),  22  },
+            {   "PH15", SUNXI_GPH(15),  23  },
+            {   "PB13", SUNXI_GPB(13),  24  },
+            {   "PH16", SUNXI_GPH(16),  25  },
+            {   "PB14", SUNXI_GPB(14),  26  },
+            {   "PH17", SUNXI_GPH(17),  27  },
+            {   "PB15", SUNXI_GPB(15),  28  },
+            {   "PH18", SUNXI_GPH(18),  29  },
+            {   "PB16", SUNXI_GPB(16),  30  },
+            {   "PH19", SUNXI_GPH(19),  31  },
+            {   "PB17", SUNXI_GPB(17),  32  },
+            {   "PH20", SUNXI_GPH(20),  33  },
+            {   "PH24", SUNXI_GPH(24),  34  },
+            {   "PH21", SUNXI_GPH(21),  35  },
+            {   "PH25", SUNXI_GPH(25),  36  },
+            {   "PH22", SUNXI_GPH(22),  37  },
+            {   "PH26", SUNXI_GPH(26),  38  },
+            {   "PH23", SUNXI_GPH(23),  39  },
+            {   "PH27", SUNXI_GPH(27),  40  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+
+    {"uext1",
+        {
+            {   "PI12", SUNXI_GPI(12),   3   },
+            {   "PI13", SUNXI_GPI(13),   4   },
+            {   "PB20", SUNXI_GPB(20),   5   },
+            {   "PB21", SUNXI_GPB(21),   6   },
+            {   "PC22", SUNXI_GPC(22),   7   },
+            {   "PC21", SUNXI_GPC(21),   8   },
+            {   "PC20", SUNXI_GPC(20),   9   },
+            {   "PC19", SUNXI_GPC(19),   10  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"uext2",
+        {
+            {   "PI20", SUNXI_GPI(20),   3   },
+            {   "PI21", SUNXI_GPI(21),   4   },
+            {   "PB18", SUNXI_GPB(18),   5   },
+            {   "PB19", SUNXI_GPB(19),   6   },
+            {   "PI19", SUNXI_GPI(19),   7   },
+            {   "PI18", SUNXI_GPI(18),   8   },
+            {   "PI17", SUNXI_GPI(17),   9   },
+            {   "PI16", SUNXI_GPI(16),   10  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+};
+
+
+
+#endif
--- a/recipes-devtools/python/files/olinuxino-a20lime/mapping.h
+++ b/recipes-devtools/python/files/olinuxino-a20lime/mapping.h
@ -0,0 +1,221 @@
+/*
+ *
+ * This file is part of pyA20Lime.
+ * mapping.h is python GPIO extension.
+ *
+ * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
+ *
+ * pyA20Lime is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MAPPING_H
+#define __MAPPING_H
+
+#include "gpio_lib.h"
+
+/**
+Structure that describe all gpio
+*/
+typedef struct _pin {
+    char name[10];          // The processor pin
+    int offset;             // Memory offset for the pin
+    int pin_number;         // Number on the connector
+}pin_t;
+
+typedef struct _gpio {
+    char connector_name[10];
+    pin_t pins[41];
+}gpio_t;
+
+
+gpio_t gpio[] = {
+    {"lcd",
+        {
+            {   "PD16", SUNXI_GPD(16),  5   },
+            {   "PD17", SUNXI_GPD(17),  6   },
+            {   "PD18", SUNXI_GPD(18),  7   },
+            {   "PD19", SUNXI_GPD(19),  8   },
+            {   "PD20", SUNXI_GPD(20),  9   },
+            {   "PD21", SUNXI_GPD(21),  10  },
+            {   "PD22", SUNXI_GPD(22),  11  },
+            {   "PD23", SUNXI_GPD(23),  12  },
+            {   "PD8",  SUNXI_GPD(8),   13  },
+            {   "PD9",  SUNXI_GPD(9),   14  },
+            {   "PD10", SUNXI_GPD(10),  15  },
+            {   "PD11", SUNXI_GPD(11),  16  },
+            {   "PD12", SUNXI_GPD(12),  17  },
+            {   "PD13", SUNXI_GPD(13),  18  },
+            {   "PD14", SUNXI_GPD(14),  19  },
+            {   "PD15", SUNXI_GPD(15),  20  },
+            {   "PD0",  SUNXI_GPD(0),   21  },
+            {   "PD1",  SUNXI_GPD(1),   22  },
+            {   "PD2",  SUNXI_GPD(2),   23  },
+            {   "PD3",  SUNXI_GPD(3),   24  },
+            {   "PD4",  SUNXI_GPD(4),   25  },
+            {   "PD5",  SUNXI_GPD(5),   26  },
+            {   "PD6",  SUNXI_GPD(6),   27  },
+            {   "PD7",  SUNXI_GPD(7),   28  },
+            {   "PD26", SUNXI_GPD(26),  29  },
+            {   "PD27", SUNXI_GPD(27),  30  },
+            {   "PD24", SUNXI_GPD(24),  31  },
+            {   "PD25", SUNXI_GPD(25),  32  },
+            {   "PH8",  SUNXI_GPH(8),   35  },
+            {   "PB2",  SUNXI_GPB(2),   36  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio1",
+        {
+            {   "PG0",  SUNXI_GPG(0),   5   },
+            {   "PG1",  SUNXI_GPG(1),   7   },
+            {   "PG2",  SUNXI_GPG(2),   9   },
+            {   "PG3",  SUNXI_GPG(3),   11  },
+            {   "PG4",  SUNXI_GPG(4),   13  },
+            {   "PG5",  SUNXI_GPG(5),   15  },
+            {   "PG6",  SUNXI_GPG(6),   17  },
+            {   "PG7",  SUNXI_GPG(7),   19  },
+            {   "PG8",  SUNXI_GPG(8),   21  },
+            {   "PG9",  SUNXI_GPG(9),   23  },
+            {   "PG10", SUNXI_GPG(10),  25  },
+            {   "PG11", SUNXI_GPG(11),  27  },
+            {   "PC3",  SUNXI_GPC(3),   29  },
+            {   "PC18", SUNXI_GPC(18),  31  },
+            {   "PC19", SUNXI_GPC(19),  33  },
+            {   "PC20", SUNXI_GPC(20),  35  },
+            {   "PC21", SUNXI_GPC(21),  37  },
+            {   "PC22", SUNXI_GPC(22),  39  },
+            {   "PC23", SUNXI_GPC(23),  40  },
+            {   "PC24", SUNXI_GPC(24),  38  },
+            {   "PB18", SUNXI_GPB(18),  36  },
+            {   "PB19", SUNXI_GPB(19),  34  },
+            {   "PB20", SUNXI_GPB(20),  32  },
+            {   "PB21", SUNXI_GPB(21),  30  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio2",
+        {
+            {   "PI0",  SUNXI_GPI(0),   9   },
+            {   "PI1",  SUNXI_GPI(1),   11  },
+            {   "PI2",  SUNXI_GPI(2),   13  },
+            {   "PI3",  SUNXI_GPI(3),   15  },
+            {   "PI4",  SUNXI_GPI(4),   17  },
+            {   "PI5",  SUNXI_GPI(5),   19  },
+            {   "PI6",  SUNXI_GPI(6),   21  },
+            {   "PI7",  SUNXI_GPI(7),   23  },
+            {   "PI8",  SUNXI_GPI(8),   25  },
+            {   "PI9",  SUNXI_GPI(9),   27  },
+            {   "PI10", SUNXI_GPI(10),  29  },
+            {   "PI11", SUNXI_GPI(11),  31  },
+            {   "PI12", SUNXI_GPI(12),  33  },
+            {   "PI13", SUNXI_GPI(13),  35  },
+            {   "PI14", SUNXI_GPI(14),  37  },
+            {   "PI15", SUNXI_GPI(15),  39  },
+            {   "PI16", SUNXI_GPI(16),  40  },
+            {   "PI17", SUNXI_GPI(17),  38  },
+            {   "PI18", SUNXI_GPI(18),  36  },
+            {   "PI19", SUNXI_GPI(19),  34  },
+            {   "PI20", SUNXI_GPI(20),  32  },
+            {   "PI21", SUNXI_GPI(21),  30  },
+            {   "PE0",  SUNXI_GPE(0),   6   },
+            {   "PE1",  SUNXI_GPE(1),   8   },
+            {   "PE2",  SUNXI_GPE(2),   10  },
+            {   "PE3",  SUNXI_GPE(3),   12  },
+            {   "PE4",  SUNXI_GPE(4),   14  },
+            {   "PE5",  SUNXI_GPE(5),   16  },
+            {   "PE6",  SUNXI_GPE(6),   18  },
+            {   "PE7",  SUNXI_GPE(7),   20  },
+            {   "PE8",  SUNXI_GPE(8),   22  },
+            {   "PE9",  SUNXI_GPE(9),   24  },
+            {   "PE10", SUNXI_GPE(10),  26  },
+            {   "PE11", SUNXI_GPE(11),  28  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio3",
+        {
+            {   "PH0",  SUNXI_GPH(0),   7   },
+            {   "PH7",  SUNXI_GPH(7),   9   },
+            {   "PH9",  SUNXI_GPH(9),   11  },
+            {   "PH10", SUNXI_GPH(10),  13  },
+            {   "PH11", SUNXI_GPH(11),  15  },
+            {   "PH12", SUNXI_GPH(12),  17  },
+            {   "PH13", SUNXI_GPH(13),  19  },
+            {   "PH14", SUNXI_GPH(14),  21  },
+            {   "PH15", SUNXI_GPH(15),  23  },
+            {   "PH16", SUNXI_GPH(16),  25  },
+            {   "PH17", SUNXI_GPH(17),  27  },
+            {   "PH18", SUNXI_GPH(18),  29  },
+            {   "PH19", SUNXI_GPH(19),  31  },
+            {   "PH20", SUNXI_GPH(20),  33  },
+            {   "PH21", SUNXI_GPH(21),  35  },
+            {   "PH22", SUNXI_GPH(22),  37  },
+            {   "PH23", SUNXI_GPH(23),  39  },
+            {   "PH24", SUNXI_GPH(24),  34  },
+            {   "PH25", SUNXI_GPH(25),  36  },
+            {   "PH26", SUNXI_GPH(26),  38  },
+            {   "PH27", SUNXI_GPH(27),  40  },
+            {   "PB3",  SUNXI_GPB(3),   6   },
+            {   "PB4",  SUNXI_GPB(4),   8   },
+            {   "PB5",  SUNXI_GPB(5),   10  },
+            {   "PB6",  SUNXI_GPB(6),   12  },
+            {   "PB7",  SUNXI_GPB(7),   14  },
+            {   "PB8",  SUNXI_GPB(8),   16  },
+            {   "PB10", SUNXI_GPB(10),  18  },
+            {   "PB11", SUNXI_GPB(11),  20  },
+            {   "PB12", SUNXI_GPB(12),  22  },
+            {   "PB13", SUNXI_GPB(13),  24  },
+            {   "PB14", SUNXI_GPB(14),  26  },
+            {   "PB15", SUNXI_GPB(15),  28  },
+            {   "PB16", SUNXI_GPB(16),  30  },
+            {   "PB17", SUNXI_GPB(17),  32  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio4",
+        {
+            {   "PC7",  SUNXI_GPC(7),   16  },
+            {   "PC16", SUNXI_GPC(16),  18  },
+            {   "PC17", SUNXI_GPC(17),  20  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"led",
+        {
+            {   "PH2",  SUNXI_GPH(2),   1},
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+};
+
+#endif
--- a/recipes-devtools/python/files/olinuxino-a20lime2/mapping.h
+++ b/recipes-devtools/python/files/olinuxino-a20lime2/mapping.h
@ -0,0 +1,224 @@
+/*
+ *
+ * This file is part of pyA20Lime2.
+ * mapping.h is python GPIO extension.
+ *
+ * Copyright (c) 2014 Stefan Mavrodiev @ OLIMEX LTD, <support@olimex.com>
+ *
+ * pyA20Lime2 is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __MAPPING_H
+#define __MAPPING_H
+
+#include "gpio_lib.h"
+
+/**
+Structure that describe all gpio
+*/
+typedef struct _pin {
+    char name[10];          // The processor pin
+    int offset;             // Memory offset for the pin
+    int pin_number;         // Number on the connector
+}pin_t;
+
+typedef struct _gpio {
+    char connector_name[10];
+    pin_t pins[41];
+}gpio_t;
+
+
+gpio_t gpio[] = {
+    {"lcd",
+        {
+            {   "PD16", SUNXI_GPD(16),  5   },
+            {   "PD17", SUNXI_GPD(17),  6   },
+            {   "PD18", SUNXI_GPD(18),  7   },
+            {   "PD19", SUNXI_GPD(19),  8   },
+            {   "PD20", SUNXI_GPD(20),  9   },
+            {   "PD21", SUNXI_GPD(21),  10  },
+            {   "PD22", SUNXI_GPD(22),  11  },
+            {   "PD23", SUNXI_GPD(23),  12  },
+            {   "PD8",  SUNXI_GPD(8),   13  },
+            {   "PD9",  SUNXI_GPD(9),   14  },
+            {   "PD10", SUNXI_GPD(10),  15  },
+            {   "PD11", SUNXI_GPD(11),  16  },
+            {   "PD12", SUNXI_GPD(12),  17  },
+            {   "PD13", SUNXI_GPD(13),  18  },
+            {   "PD14", SUNXI_GPD(14),  19  },
+            {   "PD15", SUNXI_GPD(15),  20  },
+            {   "PD0",  SUNXI_GPD(0),   21  },
+            {   "PD1",  SUNXI_GPD(1),   22  },
+            {   "PD2",  SUNXI_GPD(2),   23  },
+            {   "PD3",  SUNXI_GPD(3),   24  },
+            {   "PD4",  SUNXI_GPD(4),   25  },
+            {   "PD5",  SUNXI_GPD(5),   26  },
+            {   "PD6",  SUNXI_GPD(6),   27  },
+            {   "PD7",  SUNXI_GPD(7),   28  },
+            {   "PD26", SUNXI_GPD(26),  29  },
+            {   "PD27", SUNXI_GPD(27),  30  },
+            {   "PD24", SUNXI_GPD(24),  31  },
+            {   "PD25", SUNXI_GPD(25),  32  },
+            {   "PH8",  SUNXI_GPH(8),   35  },
+            {   "PB2",  SUNXI_GPB(2),   36  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio1",
+        {
+            {   "PG0",  SUNXI_GPG(0),   5   },
+            {   "PG1",  SUNXI_GPG(1),   7   },
+            {   "PG2",  SUNXI_GPG(2),   9   },
+            {   "PG3",  SUNXI_GPG(3),   11  },
+            {   "PG4",  SUNXI_GPG(4),   13  },
+            {   "PG5",  SUNXI_GPG(5),   15  },
+            {   "PG6",  SUNXI_GPG(6),   17  },
+            {   "PG7",  SUNXI_GPG(7),   19  },
+            {   "PG8",  SUNXI_GPG(8),   21  },
+            {   "PG9",  SUNXI_GPG(9),   23  },
+            {   "PG10", SUNXI_GPG(10),  25  },
+            {   "PG11", SUNXI_GPG(11),  27  },
+            {   "PC3",  SUNXI_GPC(3),   29  },
+            {   "PC18", SUNXI_GPC(18),  31  },
+            {   "PC19", SUNXI_GPC(19),  33  },
+            {   "PC20", SUNXI_GPC(20),  35  },
+            {   "PC21", SUNXI_GPC(21),  37  },
+            {   "PC22", SUNXI_GPC(22),  39  },
+            {   "PC23", SUNXI_GPC(23),  40  },
+            {   "PC24", SUNXI_GPC(24),  38  },
+            {   "PB18", SUNXI_GPB(18),  36  },
+            {   "PB19", SUNXI_GPB(19),  34  },
+            {   "PB20", SUNXI_GPB(20),  32  },
+            {   "PB21", SUNXI_GPB(21),  30  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio2",
+        {
+            {   "PI0",  SUNXI_GPI(0),   9   },
+            {   "PI1",  SUNXI_GPI(1),   11  },
+            {   "PI2",  SUNXI_GPI(2),   13  },
+            {   "PI3",  SUNXI_GPI(3),   15  },
+            {   "PI4",  SUNXI_GPI(4),   17  },
+            {   "PI5",  SUNXI_GPI(5),   19  },
+            {   "PI6",  SUNXI_GPI(6),   21  },
+            {   "PI7",  SUNXI_GPI(7),   23  },
+            {   "PI8",  SUNXI_GPI(8),   25  },
+            {   "PI9",  SUNXI_GPI(9),   27  },
+            {   "PI10", SUNXI_GPI(10),  29  },
+            {   "PI11", SUNXI_GPI(11),  31  },
+            {   "PI12", SUNXI_GPI(12),  33  },
+            {   "PI13", SUNXI_GPI(13),  35  },
+            {   "PI14", SUNXI_GPI(14),  37  },
+            {   "PI15", SUNXI_GPI(15),  39  },
+            {   "PI16", SUNXI_GPI(16),  40  },
+            {   "PI17", SUNXI_GPI(17),  38  },
+            {   "PI18", SUNXI_GPI(18),  36  },
+            {   "PI19", SUNXI_GPI(19),  34  },
+            {   "PI20", SUNXI_GPI(20),  32  },
+            {   "PI21", SUNXI_GPI(21),  30  },
+            {   "PE0",  SUNXI_GPE(0),   6   },
+            {   "PE1",  SUNXI_GPE(1),   8   },
+            {   "PE2",  SUNXI_GPE(2),   10  },
+            {   "PE3",  SUNXI_GPE(3),   12  },
+            {   "PE4",  SUNXI_GPE(4),   14  },
+            {   "PE5",  SUNXI_GPE(5),   16  },
+            {   "PE6",  SUNXI_GPE(6),   18  },
+            {   "PE7",  SUNXI_GPE(7),   20  },
+            {   "PE8",  SUNXI_GPE(8),   22  },
+            {   "PE9",  SUNXI_GPE(9),   24  },
+            {   "PE10", SUNXI_GPE(10),  26  },
+            {   "PE11", SUNXI_GPE(11),  28  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio3",
+        {
+            {   "PH0",  SUNXI_GPH(0),   7   },
+            {   "PH7",  SUNXI_GPH(7),   9   },
+            {   "PH9",  SUNXI_GPH(9),   11  },
+            {   "PH10", SUNXI_GPH(10),  13  },
+            {   "PH11", SUNXI_GPH(11),  15  },
+            {   "PH12", SUNXI_GPH(12),  17  },
+            {   "PH13", SUNXI_GPH(13),  19  },
+            {   "PH14", SUNXI_GPH(14),  21  },
+            {   "PH15", SUNXI_GPH(15),  23  },
+            {   "PH16", SUNXI_GPH(16),  25  },
+            {   "PH17", SUNXI_GPH(17),  27  },
+            {   "PH18", SUNXI_GPH(18),  29  },
+            {   "PH19", SUNXI_GPH(19),  31  },
+            {   "PH20", SUNXI_GPH(20),  33  },
+            {   "PH21", SUNXI_GPH(21),  35  },
+            {   "PH22", SUNXI_GPH(22),  37  },
+            {   "PH23", SUNXI_GPH(23),  39  },
+            {   "PH24", SUNXI_GPH(24),  34  },
+            {   "PH25", SUNXI_GPH(25),  36  },
+            {   "PH26", SUNXI_GPH(26),  38  },
+            {   "PH27", SUNXI_GPH(27),  40  },
+            {   "PB3",  SUNXI_GPB(3),   4   },
+            {   "PB4",  SUNXI_GPB(4),   6   },
+            {   "PB5",  SUNXI_GPB(5),   8  },
+            {   "PB6",  SUNXI_GPB(6),   10  },
+            {   "PB7",  SUNXI_GPB(7),   12  },
+            {   "PB8",  SUNXI_GPB(8),   14  },
+            {   "PB9",  SUNXI_GPB(8),   16  },
+            {   "PB10", SUNXI_GPB(10),  18  },
+            {   "PB11", SUNXI_GPB(11),  20  },
+            {   "PB12", SUNXI_GPB(12),  22  },
+            {   "PB13", SUNXI_GPB(13),  24  },
+            {   "PB14", SUNXI_GPB(14),  26  },
+            {   "PB15", SUNXI_GPB(15),  28  },
+            {   "PB16", SUNXI_GPB(16),  30  },
+            {   "PB17", SUNXI_GPB(17),  32  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"gpio4",
+        {
+            {   "PA9",  SUNXI_GPA(9),   12  },
+            {   "PA14", SUNXI_GPA(14),  14  },
+            {   "PC7",  SUNXI_GPC(7),   16  },
+            {   "PC16", SUNXI_GPC(16),  18  },
+            {   "PC17", SUNXI_GPC(17),  20  },
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+
+    {"led",
+        {
+            {   "PH2",  SUNXI_GPH(2),   1},
+            {
+                {   0,  0,  0}
+            },
+        }
+    },
+};
+
+#endif
--- a/recipes-devtools/python/files/setup.py.patch
+++ b/recipes-devtools/python/files/setup.py.patch
@ -0,0 +1,51 @@
+--- pyA20-0.2.0/setup.py	2014-09-04 12:17:18.000000000 +0200
+++ pyA20-0.2.0/setup.py	2014-11-24 17:44:37.000000000 +0100
+@@ -43,31 +43,31 @@
+     Detect processor type
+     :return:
+     """
+-    cpuinfo = open("/proc/cpuinfo", 'r')
+-    for line in cpuinfo:
+-        if "Hardware" in line:
+-            processor = line.split(":")[1].rstrip()
+    #cpuinfo = open("/proc/cpuinfo", 'r')
+    #for line in cpuinfo:
+    #    if "Hardware" in line:
+    #        processor = line.split(":")[1].rstrip()
+ 
+-            if "sun4i" in processor:
+-                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A10)")
+    #        if "sun4i" in processor:
+    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A10)")
+ 
+-            elif "sun5i" in processor:
+-                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A13)")
+    #        elif "sun5i" in processor:
+    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A13)")
+ 
+-            elif "sun7i" in processor:
+-                print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A20)")
+    #        elif "sun7i" in processor:
+    #            print ("Detected processor: " + print_color(processor) + " (Probably Allwinner A20)")
+ 
+-            else:
+-                print ("Detected processor: " + print_color("unknown"))
+    #        else:
+    #            print ("Detected processor: " + print_color("unknown"))
+ 
+ 
+-            if processor_type not in processor:
+-                print_warning()
+    #        if processor_type not in processor:
+    #            print_warning()
+ 
+-            return
+    return
+ 
+-    print ("No processor detected")
+-    print_warning()
+    #print ("No processor detected")
+    #print_warning()
+ 
+ 
+ class build_ext(_build_ext):
--- a/recipes-devtools/python/pyA20_0.2.0.bb
+++ b/recipes-devtools/python/pyA20_0.2.0.bb
@ -0,0 +1,24 @@
+DESCRIPTION = "A module to control Allwinner GPIO,SPI and I2C channels"
+HOMEPAGE = "https://pypi.python.org/pypi/pyA20"
+SECTION = "devel/python"
+LICENSE = "MIT"
+LIC_FILES_CHKSUM = "file://PKG-INFO;md5=b4cb7d5da6f1efc1d0bf487169e83985"
+DEPENDS = "python"
+
+# No GPIO mappings for other machines yet
+COMPATIBLE_MACHINE = "(olinuxino-a13|olinuxino-a10|olinuxino-a20|olinuxino-a10lime|olinuxino-a20lime|olinuxino-a20lime2|olinuxino-a13som)"
+
+SRC_URI = "http://pypi.python.org/packages/source/p/pyA20/pyA20-${PV}.tar.gz \
+           file://setup.py.patch \
+           file://mapping.h \
+          "
+S = "${WORKDIR}/pyA20-${PV}"
+
+inherit distutils
+
+do_compile_prepend() { 
+cp ${WORKDIR}/mapping.h ${S}/pyA20/gpio/mapping.h
+}
+
+SRC_URI[md5sum] = "b4115859834f09ebd389f810f2ffefb9"
+SRC_URI[sha256sum] = "9855747d9bbdfcce6b460fcd67d953155e39f4e002a9a4c573910248b451dad8"
--- a/recipes-graphics/libgles/sunxi-mali/0001-Add-EGLSyncKHR-EGLTimeKHR-and-GLChar-definition.patch
+++ b/recipes-graphics/libgles/sunxi-mali/0001-Add-EGLSyncKHR-EGLTimeKHR-and-GLChar-definition.patch
@ -0,0 +1,47 @@
+From fcdde5440976bb2c204789e13313c4d77cb263b7 Mon Sep 17 00:00:00 2001
+From: Nicolas Aguirre <aguirre.nicolas@gmail.com>
+Date: Tue, 16 Jun 2015 23:06:29 +0200
+Subject: [PATCH] Add EGLSyncKHR EGLTimeKHR and GLChar definition
+
+---
+ include/EGL/eglext.h | 4 +++-
+ include/GLES2/gl2.h  | 1 +
+ 2 files changed, 4 insertions(+), 1 deletion(-)
+
+diff --git a/include/EGL/eglext.h b/include/EGL/eglext.h
+index 25cfcb8..ec482d8 100644
+--- a/include/EGL/eglext.h
+++ b/include/EGL/eglext.h
+@@ -36,7 +36,6 @@ extern "C" {
+ /* Current version at http://www.khronos.org/registry/egl/ */
+ /* $Revision: 7244 $ on $Date: 2009-01-20 17:06:59 -0800 (Tue, 20 Jan 2009) $ */
+ #define EGL_EGLEXT_VERSION 3
+-
+ #ifndef EGL_KHR_config_attribs
+ #define EGL_KHR_config_attribs 1
+ #define EGL_CONFORMANT_KHR			0x3042	/* EGLConfig attribute */
+@@ -44,6 +43,9 @@ extern "C" {
+ #define EGL_VG_ALPHA_FORMAT_PRE_BIT_KHR		0x0040	/* EGL_SURFACE_TYPE bitfield */
+ #endif
+ 
+typedef void *EGLSyncKHR;
+typedef uint64_t EGLTimeKHR;
+
+ #ifndef EGL_KHR_lock_surface
+ #define EGL_KHR_lock_surface 1
+ #define EGL_READ_SURFACE_BIT_KHR		0x0001	/* EGL_LOCK_USAGE_HINT_KHR bitfield */
+diff --git a/include/GLES2/gl2.h b/include/GLES2/gl2.h
+index 59e376c..90d96bb 100644
+--- a/include/GLES2/gl2.h
+++ b/include/GLES2/gl2.h
+@@ -32,6 +32,7 @@ typedef unsigned int     GLuint;
+ typedef khronos_float_t  GLfloat;
+ typedef khronos_float_t  GLclampf;
+ typedef khronos_int32_t  GLfixed;
+typedef char             GLchar;
+ 
+ /* GL types for handling large vertex buffer objects */
+ typedef khronos_intptr_t GLintptr;
+-- 
+1.9.1
+
--- a/recipes-graphics/libgles/sunxi-mali/0001-fix-test-build.patch
+++ b/recipes-graphics/libgles/sunxi-mali/0001-fix-test-build.patch
@ -0,0 +1,28 @@
+From 054886253f4f559b351a94e1e6ebfd5eb504461f Mon Sep 17 00:00:00 2001
+From: Trevor Woerner <twoerner@gmail.com>
+Date: Thu, 24 Sep 2015 23:38:11 -0400
+Subject: [PATCH] fix test build
+
+Allow the test application to build and link successfully.
+
+Signed-off-by: Trevor Woerner <twoerner@gmail.com>
+---
+ test/Makefile | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/test/Makefile b/test/Makefile
+index 700416e..51481c9 100644
+--- a/test/Makefile
+++ b/test/Makefile
+@@ -5,7 +5,7 @@ CFLAGS ?= -Wall
+ all: test
+ 
+ test: ../config.mk test.c
+-	$(CC) $(CFLAGS) -o $@ test.c -lEGL -lGLESv2
+	$(CC) $(CFLAGS) -I../include -L../../image/usr/lib -o $@ test.c -lEGL -lGLESv2 -lX11
+ 
+ clean:
+ 	rm -f test
+-- 
+2.6.0.rc3
+
--- a/recipes-graphics/libgles/sunxi-mali/0002-Add-missing-GLchar-definition.patch
+++ b/recipes-graphics/libgles/sunxi-mali/0002-Add-missing-GLchar-definition.patch
@ -0,0 +1,136 @@
+From 15d91ef25234ff402f4288273989693f2d402d9d Mon Sep 17 00:00:00 2001
+From: Raoul Hecky <raoul.hecky@gmail.com>
+Date: Fri, 10 Jan 2014 14:44:53 +0100
+Subject: [PATCH] Add missing GLchar definition, some gl/gles apps needs that
+ to compile correctly
+
+Build pkg-config files for gles and egl and install them
+
+Fix .pc creation
+
+add correct driver version in .pc
+---
+ .gitignore          |  1 +
+ Makefile            |  1 +
+ Makefile.pc         | 21 +++++++++++++++++++++
+ egl.pc.in           | 11 +++++++++++
+ gles_cm.pc.in       | 11 +++++++++++
+ glesv2.pc.in        | 11 +++++++++++
+ include/GLES/gl.h   |  1 +
+ include/GLES2/gl2.h |  1 +
+ 8 files changed, 58 insertions(+)
+ create mode 100644 Makefile.pc
+ create mode 100644 egl.pc.in
+ create mode 100644 gles_cm.pc.in
+ create mode 100644 glesv2.pc.in
+
+diff --git a/.gitignore b/.gitignore
+index 6865abf..e8a3713 100644
+--- a/.gitignore
+++ b/.gitignore
+@@ -1,2 +1,3 @@
+ config.mk
+ *~
+*.pc
+diff --git a/Makefile b/Makefile
+index 60d4a0f..94845ea 100644
+--- a/Makefile
+++ b/Makefile
+@@ -21,6 +21,7 @@ clean:
+ install: config.mk
+ 	$(MAKE) -C lib install
+ 	$(MAKE) -C include install
+	$(MAKE) -f Makefile.pc
+ 
+ test: config.mk
+ 	$(MAKE) -C test test
+diff --git a/Makefile.pc b/Makefile.pc
+new file mode 100644
+index 0000000..01097fd
+--- /dev/null
+++ b/Makefile.pc
+@@ -0,0 +1,21 @@
+include Makefile.setup
+include config.mk
+
+all:
+	echo "prefix=$(prefix)" > egl.pc
+	cat egl.pc.in >> egl.pc
+	sed -i "s/MVERSION/$MALI_VERSION/g" egl.pc
+	echo "prefix=$(prefix)" > gles_cm.pc
+	cat gles_cm.pc.in >> gles_cm.pc
+	sed -i "s/MVERSION/$MALI_VERSION/g" gles_cm.pc
+	echo "prefix=$(prefix)" > glesv2.pc
+	cat glesv2.pc.in >> glesv2.pc
+	sed -i "s/MVERSION/$MALI_VERSION/g" glesv2.pc
+
+install: egl.pc gles_cm.pc glesv2.pc
+	$(MKDIR) $(libdir)/pkgconfig
+	$(INSTALL_DATA) $^ $(libdir)/pkgconfig
+
+clean:
+	$(RM) egl.pc gles_cm.pc glesv2.pc
+
+diff --git a/egl.pc.in b/egl.pc.in
+new file mode 100644
+index 0000000..0697183
+--- /dev/null
+++ b/egl.pc.in
+@@ -0,0 +1,11 @@
+exec_prefix=${prefix}
+libdir=${prefix}/lib
+includedir=${prefix}/include
+
+Name: egl
+Description: Mali EGL library
+Requires.private:
+Version: MVERSION
+Libs: -L${libdir} -lEGL
+Libs.private: -lm -lpthread -ldl
+Cflags: -I${includedir}
+diff --git a/gles_cm.pc.in b/gles_cm.pc.in
+new file mode 100644
+index 0000000..22bc348
+--- /dev/null
+++ b/gles_cm.pc.in
+@@ -0,0 +1,11 @@
+exec_prefix=${prefix}
+libdir=${prefix}/lib
+includedir=${prefix}/include
+
+Name: gles_cm
+Description: Mali OpenGL ES 1.1 CM library
+Requires.private:
+Version: MVERSION
+Libs: -L${libdir} -lGLES_CM
+Libs.private: -lm -lpthread -ldl
+Cflags: -I${includedir}
+diff --git a/glesv2.pc.in b/glesv2.pc.in
+new file mode 100644
+index 0000000..efef2ed
+--- /dev/null
+++ b/glesv2.pc.in
+@@ -0,0 +1,11 @@
+exec_prefix=${prefix}
+libdir=${prefix}/lib
+includedir=${prefix}/include
+
+Name: glesv2
+Description: Mali OpenGL ES 2.0 library
+Requires.private:
+Version: MVERSION
+Libs: -L${libdir} -lGLESv2
+Libs.private: -lm -lpthread -ldl
+Cflags: -I${includedir}
+diff --git a/include/GLES/gl.h b/include/GLES/gl.h
+index 858f394..a6bb591 100644
+--- a/include/GLES/gl.h
+++ b/include/GLES/gl.h
+@@ -29,6 +29,7 @@ typedef float  GLfloat;
+ typedef float  GLclampf;
+ typedef signed int  GLfixed;
+ typedef signed int  GLclampx;
+typedef char GLchar;
+ 
+ typedef int * GLintptr;
+ typedef int *  GLsizeiptr;
--- a/recipes-graphics/libgles/sunxi-mali/0003-Fix-sed-to-replace-by-the-correct-var.patch
+++ b/recipes-graphics/libgles/sunxi-mali/0003-Fix-sed-to-replace-by-the-correct-var.patch
@ -0,0 +1,30 @@
+From 95bbd40135f96b473d4c713317e485d0049580cd Mon Sep 17 00:00:00 2001
+From: Raoul Hecky <raoul.hecky@gmail.com>
+Date: Tue, 8 Apr 2014 08:10:12 +0200
+Subject: [PATCH] Fix sed to replace by the correct var
+
+---
+ Makefile.pc | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/Makefile.pc b/Makefile.pc
+index 01097fd..c51d18c 100644
+--- a/Makefile.pc
+++ b/Makefile.pc
+@@ -4,13 +4,13 @@ include config.mk
+ all:
+ 	echo "prefix=$(prefix)" > egl.pc
+ 	cat egl.pc.in >> egl.pc
+-	sed -i "s/MVERSION/$MALI_VERSION/g" egl.pc
+	sed -i "s/MVERSION/${MALI_VERSION}/g" egl.pc
+ 	echo "prefix=$(prefix)" > gles_cm.pc
+ 	cat gles_cm.pc.in >> gles_cm.pc
+-	sed -i "s/MVERSION/$MALI_VERSION/g" gles_cm.pc
+	sed -i "s/MVERSION/${MALI_VERSION}/g" gles_cm.pc
+ 	echo "prefix=$(prefix)" > glesv2.pc
+ 	cat glesv2.pc.in >> glesv2.pc
+-	sed -i "s/MVERSION/$MALI_VERSION/g" glesv2.pc
+	sed -i "s/MVERSION/${MALI_VERSION}/g" glesv2.pc
+ 
+ install: egl.pc gles_cm.pc glesv2.pc
+ 	$(MKDIR) $(libdir)/pkgconfig
--- a/recipes-graphics/libgles/sunxi-mali_git.bb
+++ b/recipes-graphics/libgles/sunxi-mali_git.bb
@ -3,18 +3,21 @@ DESCRIPTION = "libGLES for the A10/A13 Allwinner processor with Mali 400 (X11)"
 LICENSE = "Proprietary"
 LIC_FILES_CHKSUM = "file://README;md5=1b81a178e80ee888ee4571772699ab2c"

-COMPATIBLE_MACHINE = "(mele|meleg|cubieboard|cubieboard2|cubietruck|olinuxino-a10|olinuxino-a13|olinuxino-a20|olinuxino-a20som|olinuxino-a20lime)"
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"

 # These libraries shouldn't get installed in world builds unless something
 # explicitly depends upon them.
 EXCLUDE_FROM_WORLD = "1"
 PROVIDES = "virtual/libgles1 virtual/libgles2 virtual/egl"
-
-inherit distro_features_check
-REQUIRED_DISTRO_FEATURES = "opengl"
+RPROVIDES_${PN} += "libGLESv2.so libEGL.so libGLESv2.so libGLESv1_CM.so libMali.so"

 SRCREV_pn-${PN} = "d343311efc8db166d8371b28494f0f27b6a58724"
-SRC_URI = "gitsm://github.com/linux-sunxi/sunxi-mali.git"
+SRC_URI = "gitsm://github.com/linux-sunxi/sunxi-mali.git \
+           file://0001-Add-EGLSyncKHR-EGLTimeKHR-and-GLChar-definition.patch \
+           file://0002-Add-missing-GLchar-definition.patch \
+           file://0003-Fix-sed-to-replace-by-the-correct-var.patch \
+           file://0001-fix-test-build.patch \
+           "

 S = "${WORKDIR}/git"

@ -24,13 +27,34 @@ PACKAGECONFIG ??= "${@base_contains('DISTRO_FEATURES', 'x11', 'x11', '', d)} ${@
 PACKAGECONFIG[wayland] = "EGL_TYPE=framebuffer,,,"
 PACKAGECONFIG[x11] = "EGL_TYPE=x11,,virtual/libx11 libxau libxdmcp libdri2,"

+# Inhibit warnings about files being stripped, we can't do anything about it.
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
 INHIBIT_PACKAGE_STRIP = "1"
+INHIBIT_SYSROOT_STRIP = "1"

 do_configure() {
         DESTDIR=${D}/ VERSION=r3p0 ABI=armhf ${EXTRA_OECONF} make config
 }

 do_install() {
+    make -f Makefile.pc
+
+    # install headers
+    install -d -m 0755 ${D}${includedir}/EGL
+    install -m 0755 ${S}/include/EGL/*.h ${D}${includedir}/EGL/
+    install -d -m 0755 ${D}${includedir}/GLES
+    install -m 0755 ${S}/include/GLES/*.h ${D}${includedir}/GLES/
+    install -d -m 0755 ${D}${includedir}/GLES2
+    install -m 0755 ${S}/include/GLES2/*.h ${D}${includedir}/GLES2/
+    install -d -m 0755 ${D}${includedir}/KHR
+    install -m 0755 ${S}/include/KHR/*.h ${D}${includedir}/KHR/
+
+    # Copy the .pc files
+    install -d -m 0755 ${D}${libdir}/pkgconfig
+    install -m 0644 ${S}/egl.pc ${D}${libdir}/pkgconfig/
+    install -m 0644 ${S}/gles_cm.pc ${D}${libdir}/pkgconfig/
+    install -m 0644 ${S}/glesv2.pc ${D}${libdir}/pkgconfig/
+
    install -d ${D}${libdir}
    install -d ${D}${includedir}

@ -47,10 +71,16 @@ do_install() {
        rm ${D}${libdir}/$flib
        ln -sf libMali.so.3 ${D}${libdir}/$flib
    done
+
+    DESTDIR=${D}/ VERSION=r3p0 ABI=armhf ${EXTRA_OECONF} make test
+    install -d ${D}${bindir}
+    install -m 0755 ${S}/test/test ${D}${bindir}/sunximali-test
 }

 # Packages like xf86-video-fbturbo dlopen() libUMP.so, so we do need to ship the .so files in ${PN}
+PACKAGES =+ "${PN}-test"
 FILES_${PN} += "${libdir}/lib*.so"
-FILES_${PN}-dev = "${includedir}"
+FILES_${PN}-dev = "${includedir} ${libdir}/pkgconfig/*"
+FILES_${PN}-test = "${bindir}/sunximali-test"
 # These are closed binaries generated elsewhere so don't check ldflags & text relocations
 INSANE_SKIP_${PN} = "dev-so ldflags textrel"
--- a/recipes-graphics/xorg-xserver/xf86-video-fbturbo_git.bb
+++ b/recipes-graphics/xorg-xserver/xf86-video-fbturbo_git.bb
@ -5,11 +5,11 @@ DESCRIPTION = "X.Org X server -- A10/A13 display driver"
 LICENSE = "MIT-X"
 LIC_FILES_CHKSUM = "file://COPYING;md5=f91dc3ee5ce59eb4b528e67e98a31266"

-DEPENDS += "sunxi-mali"
+DEPENDS += "sunxi-mali libump xf86driproto"

 PE = "3"
-PV = "0.3.1+git${SRCPV}"
-SRCREV_pn-${PN} = "eed17d5586c3b4dfcf0b5976e8b947b171d4897c"
+PV = "0.5.1+git${SRCPV}"
+SRCREV_pn-${PN} = "e094e3c8f9004ca3347694bd05b99d136e8621b9"

 SRC_URI = "git://github.com/ssvb/xf86-video-fbturbo.git;protocol=http;branch=master \
           file://20-fbturbo.conf"
--- a/recipes-kernel/linux/linux-sunxi/0001-compiler-gcc5.patch
+++ b/recipes-kernel/linux/linux-sunxi/0001-compiler-gcc5.patch
@ -0,0 +1,71 @@
+Index: git/include/linux/compiler-gcc5.h
+===================================================================
+--- git/include/linux/compiler-gcc5.h    2015-09-19 20:11:27.999423338 +0200
+++ git/include/linux/compiler-gcc5.h    2015-09-23 10:26:05.000000000 +0200
+@@ -0,0 +1,66 @@
+#ifndef __LINUX_COMPILER_H
+#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
+#endif
+
+#define __used				__attribute__((__used__))
+#define __must_check			__attribute__((warn_unused_result))
+#define __compiler_offsetof(a, b)	__builtin_offsetof(a, b)
+
+/* Mark functions as cold. gcc will assume any path leading to a call
+   to them will be unlikely.  This means a lot of manual unlikely()s
+   are unnecessary now for any paths leading to the usual suspects
+   like BUG(), printk(), panic() etc. [but let's keep them for now for
+   older compilers]
+
+   Early snapshots of gcc 4.3 don't support this and we can't detect this
+   in the preprocessor, but we can live with this because they're unreleased.
+   Maketime probing would be overkill here.
+
+   gcc also has a __attribute__((__hot__)) to move hot functions into
+   a special section, but I don't see any sense in this right now in
+   the kernel context */
+#define __cold			__attribute__((__cold__))
+
+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
+
+#ifndef __CHECKER__
+# define __compiletime_warning(message) __attribute__((warning(message)))
+# define __compiletime_error(message) __attribute__((error(message)))
+#endif /* __CHECKER__ */
+
+/*
+ * Mark a position in code as unreachable.  This can be used to
+ * suppress control flow warnings after asm blocks that transfer
+ * control elsewhere.
+ *
+ * Early snapshots of gcc 4.5 don't support this and we can't detect
+ * this in the preprocessor, but we can live with this because they're
+ * unreleased.  Really, we need to have autoconf for the kernel.
+ */
+#define unreachable() __builtin_unreachable()
+
+/* Mark a function definition as prohibited from being cloned. */
+#define __noclone	__attribute__((__noclone__))
+
+/*
+ * Tell the optimizer that something else uses this function or variable.
+ */
+#define __visible __attribute__((externally_visible))
+
+/*
+ * GCC 'asm goto' miscompiles certain code sequences:
+ *
+ *   http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
+ *
+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
+ * Fixed in GCC 4.8.2 and later versions.
+ *
+ * (asm goto is automatically volatile - the naming reflects this.)
+ */
+#define asm_volatile_goto(x...)	do { asm goto(x); asm (""); } while (0)
+
+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
+#define __HAVE_BUILTIN_BSWAP32__
+#define __HAVE_BUILTIN_BSWAP64__
+#define __HAVE_BUILTIN_BSWAP16__
+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
--- a/recipes-kernel/linux/linux-sunxi/0001-gcc5-fixes.patch
+++ b/recipes-kernel/linux/linux-sunxi/0001-gcc5-fixes.patch
@ -0,0 +1,135 @@
+From 83b0b8a7b9cb658d3cc980b4fbcbb2cc8b257ccf Mon Sep 17 00:00:00 2001
+From: Trevor Woerner <twoerner@gmail.com>
+Date: Thu, 24 Sep 2015 17:07:26 -0400
+Subject: [PATCH] gcc5 fixes
+
+gcc5 is pickier about inline functions defined in headers.
+
+Signed-off-by: Trevor Woerner <twoerner@gmail.com>
+---
+ drivers/net/wireless/rtl8188eu/include/ieee80211.h | 4 ++--
+ drivers/net/wireless/rtl8189es/include/ieee80211.h | 4 ++--
+ drivers/net/wireless/rtl8192cu/include/ieee80211.h | 8 ++++----
+ drivers/net/wireless/rtl8723as/include/ieee80211.h | 4 ++--
+ drivers/staging/rtl8712/ieee80211.h                | 4 ++--
+ 5 files changed, 12 insertions(+), 12 deletions(-)
+
+diff --git a/drivers/net/wireless/rtl8188eu/include/ieee80211.h b/drivers/net/wireless/rtl8188eu/include/ieee80211.h
+index 1ae96a5..7a301c5 100644
+--- a/drivers/net/wireless/rtl8188eu/include/ieee80211.h
+++ b/drivers/net/wireless/rtl8188eu/include/ieee80211.h
+@@ -1188,12 +1188,12 @@ enum ieee80211_state {
+ (((Addr[2]) & 0xff) == 0xff) && (((Addr[3]) & 0xff) == 0xff) && (((Addr[4]) & 0xff) == 0xff) && \
+ (((Addr[5]) & 0xff) == 0xff))
+ #else
+-extern __inline int is_multicast_mac_addr(const u8 *addr)
+static __inline int is_multicast_mac_addr(const u8 *addr)
+ {
+         return ((addr[0] != 0xff) && (0x01 & addr[0]));
+ }
+ 
+-extern __inline int is_broadcast_mac_addr(const u8 *addr)
+static __inline int is_broadcast_mac_addr(const u8 *addr)
+ {
+ 	return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&   \
+ 		(addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
+diff --git a/drivers/net/wireless/rtl8189es/include/ieee80211.h b/drivers/net/wireless/rtl8189es/include/ieee80211.h
+index 1ae96a5..7a301c5 100644
+--- a/drivers/net/wireless/rtl8189es/include/ieee80211.h
+++ b/drivers/net/wireless/rtl8189es/include/ieee80211.h
+@@ -1188,12 +1188,12 @@ enum ieee80211_state {
+ (((Addr[2]) & 0xff) == 0xff) && (((Addr[3]) & 0xff) == 0xff) && (((Addr[4]) & 0xff) == 0xff) && \
+ (((Addr[5]) & 0xff) == 0xff))
+ #else
+-extern __inline int is_multicast_mac_addr(const u8 *addr)
+static __inline int is_multicast_mac_addr(const u8 *addr)
+ {
+         return ((addr[0] != 0xff) && (0x01 & addr[0]));
+ }
+ 
+-extern __inline int is_broadcast_mac_addr(const u8 *addr)
+static __inline int is_broadcast_mac_addr(const u8 *addr)
+ {
+ 	return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&   \
+ 		(addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
+diff --git a/drivers/net/wireless/rtl8192cu/include/ieee80211.h b/drivers/net/wireless/rtl8192cu/include/ieee80211.h
+index 86e9726..950691d 100644
+--- a/drivers/net/wireless/rtl8192cu/include/ieee80211.h
+++ b/drivers/net/wireless/rtl8192cu/include/ieee80211.h
+@@ -1149,12 +1149,12 @@ enum ieee80211_state {
+ #define MAC_FMT "%02x:%02x:%02x:%02x:%02x:%02x"
+ #define MAC_ARG(x) ((u8*)(x))[0],((u8*)(x))[1],((u8*)(x))[2],((u8*)(x))[3],((u8*)(x))[4],((u8*)(x))[5]
+ 
+-extern __inline int is_multicast_mac_addr(const u8 *addr)
+static __inline int is_multicast_mac_addr(const u8 *addr)
+ {
+         return ((addr[0] != 0xff) && (0x01 & addr[0]));
+ }
+ 
+-extern __inline int is_broadcast_mac_addr(const u8 *addr)
+static __inline int is_broadcast_mac_addr(const u8 *addr)
+ {
+ 	return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&   \
+ 		(addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
+@@ -1177,7 +1177,7 @@ typedef struct tx_pending_t{
+ #define IEEE_G            (1<<2)
+ #define IEEE_MODE_MASK    (IEEE_A|IEEE_B|IEEE_G)
+ 
+-extern __inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
+static __inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
+ {
+ 	/* Single white space is for Linksys APs */
+ 	if (essid_len == 1 && essid[0] == ' ')
+@@ -1193,7 +1193,7 @@ extern __inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
+ 	return 1;
+ }
+ 
+-extern __inline int ieee80211_get_hdrlen(u16 fc)
+static __inline int ieee80211_get_hdrlen(u16 fc)
+ {
+ 	int hdrlen = 24;
+ 
+diff --git a/drivers/net/wireless/rtl8723as/include/ieee80211.h b/drivers/net/wireless/rtl8723as/include/ieee80211.h
+index bf24c3b..f8046ee 100644
+--- a/drivers/net/wireless/rtl8723as/include/ieee80211.h
+++ b/drivers/net/wireless/rtl8723as/include/ieee80211.h
+@@ -1176,12 +1176,12 @@ enum ieee80211_state {
+ (((Addr[2]) & 0xff) == 0xff) && (((Addr[3]) & 0xff) == 0xff) && (((Addr[4]) & 0xff) == 0xff) && \
+ (((Addr[5]) & 0xff) == 0xff))
+ #else
+-extern __inline int is_multicast_mac_addr(const u8 *addr)
+static __inline int is_multicast_mac_addr(const u8 *addr)
+ {
+         return ((addr[0] != 0xff) && (0x01 & addr[0]));
+ }
+ 
+-extern __inline int is_broadcast_mac_addr(const u8 *addr)
+static __inline int is_broadcast_mac_addr(const u8 *addr)
+ {
+ 	return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&   \
+ 		(addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
+diff --git a/drivers/staging/rtl8712/ieee80211.h b/drivers/staging/rtl8712/ieee80211.h
+index 3c0092b..1e7b55b 100644
+--- a/drivers/staging/rtl8712/ieee80211.h
+++ b/drivers/staging/rtl8712/ieee80211.h
+@@ -734,7 +734,7 @@ enum ieee80211_state {
+ #define IEEE_G            (1<<2)
+ #define IEEE_MODE_MASK    (IEEE_A|IEEE_B|IEEE_G)
+ 
+-extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
+static inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
+ {
+ 	/* Single white space is for Linksys APs */
+ 	if (essid_len == 1 && essid[0] == ' ')
+@@ -748,7 +748,7 @@ extern inline int ieee80211_is_empty_essid(const char *essid, int essid_len)
+ 	return 1;
+ }
+ 
+-extern inline int ieee80211_get_hdrlen(u16 fc)
+static inline int ieee80211_get_hdrlen(u16 fc)
+ {
+ 	int hdrlen = 24;
+ 
+-- 
+2.6.0.rc3
+
--- a/recipes-kernel/linux/linux-sunxi/0002-use-static-inline-in-ARM-ftrace.patch
+++ b/recipes-kernel/linux/linux-sunxi/0002-use-static-inline-in-ARM-ftrace.patch
@ -0,0 +1,50 @@
+From ef4fea130eeb70eff4f3a549fd3f6e9b11437550 Mon Sep 17 00:00:00 2001
+From: ZaneZam <cyxman@yahoo.com>
+Date: Thu, 26 Mar 2015 14:50:10 +0100
+Subject: [PATCH] arm: LLVMLinux: use static inline in ARM ftrace.h
+
+With compilers which follow the C99 standard (like modern versions of gcc and
+clang), "extern inline" does the wrong thing (emits code for an externally
+linkable version of the inline function). In this case using static inline
+and removing the NULL version of return_address in return_address.c does
+the right thing.
+
+Signed-off-by: Behan Webster <behanw@converseincode.com>
+Reviewed-by: Mark Charlebois <charlebm@gmail.com>
+
+source: http://www.serverphorums.com/read.php?12,880351,880351#msg-880351
+---
+ arch/arm/include/asm/ftrace.h    | 2 +-
+ arch/arm/kernel/return_address.c | 2 ++
+ 2 files changed, 3 insertions(+), 1 deletion(-)
+
+diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
+index f89515a..2bb8cac 100644
+--- a/arch/arm/include/asm/ftrace.h
+++ b/arch/arm/include/asm/ftrace.h
+@@ -45,7 +45,7 @@ void *return_address(unsigned int);
+ 
+ #else
+ 
+-extern inline void *return_address(unsigned int level)
+static inline void *return_address(unsigned int level)
+ {
+ 	return NULL;
+ }
+diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c
+index f1aef84..49477f0 100644
+--- a/arch/arm/kernel/return_address.c
+++ b/arch/arm/kernel/return_address.c
+@@ -62,10 +62,12 @@ void *return_address(unsigned int level)
+ /* #warning "TODO: return_address should use unwind tables" */
+ #endif
+ 
+/*
+ void *return_address(unsigned int level)
+ {
+ 	return NULL;
+ }
+*/
+ 
+ #endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) / else */
+ 
--- a/recipes-kernel/linux/linux-sunxi/bananapi/defconfig
+++ b/recipes-kernel/linux/linux-sunxi/bananapi/defconfig
--- a/recipes-kernel/linux/linux-sunxi/cubieboard/defconfig
+++ b/recipes-kernel/linux/linux-sunxi/cubieboard/defconfig
--- a/recipes-kernel/linux/linux-sunxi/cubieboard2/defconfig
+++ b/recipes-kernel/linux/linux-sunxi/cubieboard2/defconfig
--- a/recipes-kernel/linux/linux-sunxi/cubietruck/defconfig
+++ b/recipes-kernel/linux/linux-sunxi/cubietruck/defconfig
--- a/recipes-kernel/linux/linux-sunxi/forfun-q88db/defconfig
+++ b/recipes-kernel/linux/linux-sunxi/forfun-q88db/defconfig
--- a/recipes-kernel/linux/linux-sunxi/mele/defconfig
+++ b/recipes-kernel/linux/linux-sunxi/mele/defconfig
--- a/recipes-kernel/linux/linux-sunxi/meleg/defconfig
+++ b/recipes-kernel/linux/linux-sunxi/meleg/defconfig
--- a/recipes-kernel/linux/linux-sunxi/olinuxino-a10/defconfig
+++ b/recipes-kernel/linux/linux-sunxi/olinuxino-a10/defconfig
--- a/recipes-kernel/linux/linux-sunxi/olinuxino-a10lime/defconfig
+++ b/recipes-kernel/linux/linux-sunxi/olinuxino-a10lime/defconfig
@ -0,0 +1,327 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_FHANDLE=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_BLK_CGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PERF_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SGI_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_ARCH_SUN4I=y
+CONFIG_SWP_EMULATE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_HIGHMEM=y
+CONFIG_COMPACTION=y
+CONFIG_KSM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT=m
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_FANTASY=y
+CONFIG_CPU_FREQ_DVFS=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_IPV6_SIT=m
+# CONFIG_ANDROID_PARANOID_NETWORK is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=y
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_NET_PKTGEN=m
+CONFIG_BT=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_CFG80211=y
+CONFIG_RFKILL=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_CMA=y
+CONFIG_CMA_SIZE_MBYTES=192
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_SUNXI_DBGREG=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_SW_SATA_AHCI_PLATFORM=m
+CONFIG_NETDEVICES=y
+CONFIG_TUN=m
+CONFIG_SUNXI_EMAC=y
+CONFIG_PHYLIB=y
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_HSO=m
+CONFIG_USB_IPHETH=m
+CONFIG_RTL8192CU_SW=m
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_KEYRESET=y
+CONFIG_KEYBOARD_SUN4IKEYPAD=m
+CONFIG_KEYBOARD_SUN4I_KEYBOARD=m
+CONFIG_KEYBOARD_HV2605_KEYBOARD=m
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_GT801=m
+CONFIG_TOUCHSCREEN_GT811=m
+CONFIG_TOUCHSCREEN_GT818=m
+CONFIG_TOUCHSCREEN_SUN4I_TS=m
+CONFIG_TOUCHSCREEN_FT5X_TS=m
+CONFIG_TOUCHSCREEN_ZT8031=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_SUNXI=m
+CONFIG_W1=m
+CONFIG_W1_SUNXI=m
+CONFIG_W1_MASTER_GPIO=m
+CONFIG_POWER_SUPPLY=y
+CONFIG_AW_AXP=y
+CONFIG_REGULATOR=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_VIDEO_DEV=y
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+# CONFIG_MEDIA_TUNER_MC44S803 is not set
+# CONFIG_MEDIA_TUNER_MAX2165 is not set
+# CONFIG_MEDIA_TUNER_TDA18218 is not set
+# CONFIG_MEDIA_TUNER_TDA18212 is not set
+# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
+CONFIG_CSI_OV7670=m
+CONFIG_CSI_GT2005=m
+CONFIG_CSI_GC0308=m
+CONFIG_CSI_HI704=m
+CONFIG_CSI_SP0838=m
+CONFIG_CSI_MT9M112=m
+CONFIG_CSI_MT9M113=m
+CONFIG_CSI_OV2655=m
+CONFIG_CSI_HI253=m
+CONFIG_CSI_MT9D112=m
+CONFIG_CSI_GC0307=m
+CONFIG_CSI_OV5640=m
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_AUDIO_ENGINE=y
+CONFIG_PA_CONTROL=y
+CONFIG_DRM=m
+CONFIG_DRM_MALI=m
+CONFIG_MALI=m
+CONFIG_FB=y
+CONFIG_FB_SUNXI=y
+CONFIG_FB_SUNXI_LCD=y
+CONFIG_FB_SUNXI_HDMI=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_REALTEK=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_FILE_STORAGE=m
+CONFIG_USB_FILE_STORAGE_TEST=y
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_SUNXI_POWER_CONTROL=y
+CONFIG_MMC_SUNXI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SUNXI=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SUN4I=y
+CONFIG_STAGING=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_QFMT_V2=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+CONFIG_CACHEFILES=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_CIFS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_LIST=y
+CONFIG_BOOT_PRINTK_DELAY=y
+CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
+# CONFIG_FTRACE is not set
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_SECURITYFS=y
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_LIBCRC32C=y
+CONFIG_AVERAGE=y
--- a/recipes-kernel/linux/linux-sunxi/olinuxino-a10s/defconfig
+++ b/recipes-kernel/linux/linux-sunxi/olinuxino-a10s/defconfig
--- a/recipes-kernel/linux/linux-sunxi/olinuxino-a13/defconfig
+++ b/recipes-kernel/linux/linux-sunxi/olinuxino-a13/defconfig
@ -0,0 +1,330 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_FHANDLE=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_BLK_CGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PERF_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SGI_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_ARCH_SUN5I=y
+CONFIG_SW_DEBUG_UART=1
+CONFIG_SWP_EMULATE=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_COMPACTION=y
+CONFIG_KSM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_INTERACTIVE=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_USR_EVNT_NOTIFY=y
+CONFIG_CPU_FREQ_DVFS=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+# CONFIG_ANDROID_PARANOID_NETWORK is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_BRIDGE=y
+CONFIG_VLAN_8021Q=y
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_NET_PKTGEN=m
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_CMA=y
+CONFIG_CMA_SIZE_MBYTES=192
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_UB=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
+CONFIG_DM_MULTIPATH=y
+CONFIG_DM_MULTIPATH_QL=y
+CONFIG_DM_MULTIPATH_ST=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_PHYLIB=y
+CONFIG_USB_CATC=y
+CONFIG_USB_KAWETH=y
+CONFIG_USB_PEGASUS=y
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_CDC_EEM=y
+CONFIG_USB_NET_DM9601=y
+CONFIG_USB_NET_SMSC75XX=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_NET_GL620A=y
+CONFIG_USB_NET_PLUSB=y
+CONFIG_USB_NET_MCS7830=y
+CONFIG_USB_NET_RNDIS_HOST=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_CX82310_ETH=y
+CONFIG_USB_NET_KALMIA=y
+CONFIG_USB_NET_QMI_WWAN=y
+CONFIG_USB_NET_INT51X1=y
+CONFIG_USB_IPHETH=y
+CONFIG_USB_SIERRA_NET=y
+CONFIG_USB_VL600=y
+CONFIG_RTL8192CU_SW=m
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_SUN4IKEYPAD=m
+CONFIG_KEYBOARD_SUN4I_KEYBOARD=m
+CONFIG_KEYBOARD_HV2605_KEYBOARD=m
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_GT801=m
+CONFIG_TOUCHSCREEN_GT811=m
+CONFIG_TOUCHSCREEN_GT818=m
+CONFIG_TOUCHSCREEN_SUN4I_TS=m
+CONFIG_TOUCHSCREEN_FT5X_TS=m
+CONFIG_TOUCHSCREEN_ZT8031=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_SPI=y
+CONFIG_SPI_SUN5I=y
+CONFIG_SUN5I_SPI_NDMA=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_SUNXI=m
+CONFIG_W1=m
+CONFIG_W1_SUNXI=m
+CONFIG_W1_MASTER_GPIO=m
+CONFIG_POWER_SUPPLY=y
+CONFIG_AW_AXP=y
+# CONFIG_SENSORS_MMA7660 is not set
+CONFIG_REGULATOR=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_PA_CONTROL=y
+CONFIG_DRM=m
+CONFIG_DRM_MALI=m
+CONFIG_MALI=m
+# CONFIG_UMP_DEBUG is not set
+CONFIG_FB=y
+CONFIG_FB_SUNXI=m
+CONFIG_FB_SUNXI_LCD=m
+CONFIG_FB_SUNXI_HDMI=m
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_REALTEK=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=y
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_GADGET=y
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_SUNXI_POWER_CONTROL=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SUNXI=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_SWITCH=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SUN5I=y
+CONFIG_STAGING=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+CONFIG_CACHEFILES=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_CIFS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_LIST=y
+CONFIG_BOOT_PRINTK_DELAY=y
+CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
+# CONFIG_FTRACE is not set
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_DEBUG_LL=y
+CONFIG_SECURITYFS=y
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_LIBCRC32C=y
--- a/recipes-kernel/linux/linux-sunxi/olinuxino-a13som/defconfig
+++ b/recipes-kernel/linux/linux-sunxi/olinuxino-a13som/defconfig
@ -0,0 +1,330 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_FHANDLE=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_AUDIT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=19
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_BLK_CGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PERF_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_OSF_PARTITION=y
+CONFIG_AMIGA_PARTITION=y
+CONFIG_MAC_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+CONFIG_SGI_PARTITION=y
+CONFIG_SUN_PARTITION=y
+CONFIG_KARMA_PARTITION=y
+CONFIG_EFI_PARTITION=y
+CONFIG_CFQ_GROUP_IOSCHED=y
+CONFIG_ARCH_SUN5I=y
+CONFIG_SW_DEBUG_UART=1
+CONFIG_SWP_EMULATE=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_COMPACTION=y
+CONFIG_KSM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug"
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_INTERACTIVE=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_USR_EVNT_NOTIFY=y
+CONFIG_CPU_FREQ_DVFS=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_SYN_COOKIES=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_IPV6_OPTIMISTIC_DAD=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_SIT_6RD=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+# CONFIG_ANDROID_PARANOID_NETWORK is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_BRIDGE=y
+CONFIG_VLAN_8021Q=y
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_NET_PKTGEN=m
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_CMA=y
+CONFIG_CMA_SIZE_MBYTES=192
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=y
+CONFIG_BLK_DEV_UB=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_MULTIPATH=y
+CONFIG_MD_FAULTY=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=y
+CONFIG_DM_SNAPSHOT=y
+CONFIG_DM_MIRROR=y
+CONFIG_DM_ZERO=y
+CONFIG_DM_MULTIPATH=y
+CONFIG_DM_MULTIPATH_QL=y
+CONFIG_DM_MULTIPATH_ST=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_PHYLIB=y
+CONFIG_USB_CATC=y
+CONFIG_USB_KAWETH=y
+CONFIG_USB_PEGASUS=y
+CONFIG_USB_RTL8150=y
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_CDC_EEM=y
+CONFIG_USB_NET_DM9601=y
+CONFIG_USB_NET_SMSC75XX=y
+CONFIG_USB_NET_SMSC95XX=y
+CONFIG_USB_NET_GL620A=y
+CONFIG_USB_NET_PLUSB=y
+CONFIG_USB_NET_MCS7830=y
+CONFIG_USB_NET_RNDIS_HOST=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_CX82310_ETH=y
+CONFIG_USB_NET_KALMIA=y
+CONFIG_USB_NET_QMI_WWAN=y
+CONFIG_USB_NET_INT51X1=y
+CONFIG_USB_IPHETH=y
+CONFIG_USB_SIERRA_NET=y
+CONFIG_USB_VL600=y
+CONFIG_RTL8192CU_SW=m
+CONFIG_INPUT_FF_MEMLESS=y
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_SUN4IKEYPAD=m
+CONFIG_KEYBOARD_SUN4I_KEYBOARD=m
+CONFIG_KEYBOARD_HV2605_KEYBOARD=m
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_GT801=m
+CONFIG_TOUCHSCREEN_GT811=m
+CONFIG_TOUCHSCREEN_GT818=m
+CONFIG_TOUCHSCREEN_SUN4I_TS=m
+CONFIG_TOUCHSCREEN_FT5X_TS=m
+CONFIG_TOUCHSCREEN_ZT8031=m
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+CONFIG_SERIAL_NONSTANDARD=y
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_SPI=y
+CONFIG_SPI_SUN5I=y
+CONFIG_SUN5I_SPI_NDMA=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_SUNXI=m
+CONFIG_W1=m
+CONFIG_W1_SUNXI=m
+CONFIG_W1_MASTER_GPIO=m
+CONFIG_POWER_SUPPLY=y
+CONFIG_AW_AXP=y
+# CONFIG_SENSORS_MMA7660 is not set
+CONFIG_REGULATOR=y
+CONFIG_MEDIA_SUPPORT=y
+CONFIG_PA_CONTROL=y
+CONFIG_DRM=m
+CONFIG_DRM_MALI=m
+CONFIG_MALI=m
+# CONFIG_UMP_DEBUG is not set
+CONFIG_FB=y
+CONFIG_FB_SUNXI=m
+CONFIG_FB_SUNXI_LCD=m
+CONFIG_FB_SUNXI_HDMI=m
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_SOC=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_REALTEK=y
+CONFIG_USB_STORAGE_DATAFAB=y
+CONFIG_USB_STORAGE_FREECOM=y
+CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_USBAT=y
+CONFIG_USB_STORAGE_SDDR09=y
+CONFIG_USB_STORAGE_SDDR55=y
+CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_ALAUDA=y
+CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_KARMA=y
+CONFIG_USB_STORAGE_CYPRESS_ATACB=y
+CONFIG_USB_STORAGE_ENE_UB6250=y
+CONFIG_USB_CYPRESS_CY7C63=m
+CONFIG_USB_GADGET=y
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_SUNXI_POWER_CONTROL=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_SUNXI=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_SWITCH=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SUN5I=y
+CONFIG_STAGING=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_QUOTA=y
+CONFIG_QUOTA_NETLINK_INTERFACE=y
+# CONFIG_PRINT_QUOTA_WARNING is not set
+CONFIG_AUTOFS4_FS=y
+CONFIG_FUSE_FS=y
+CONFIG_CUSE=y
+CONFIG_FSCACHE=y
+CONFIG_FSCACHE_STATS=y
+CONFIG_CACHEFILES=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_NTFS_RW=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_CIFS=y
+CONFIG_NLS_DEFAULT="utf8"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_CODEPAGE_950=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_NLS_CODEPAGE_949=y
+CONFIG_NLS_ASCII=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_FRAME_WARN=2048
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_SHIRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_LIST=y
+CONFIG_BOOT_PRINTK_DELAY=y
+CONFIG_DEBUG_FORCE_WEAK_PER_CPU=y
+# CONFIG_FTRACE is not set
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_STRICT_DEVMEM=y
+CONFIG_DEBUG_LL=y
+CONFIG_SECURITYFS=y
+# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
+CONFIG_CRYPTO_GF128MUL=y
+CONFIG_CRYPTO_SEQIV=y
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_ITU_T=y
+CONFIG_LIBCRC32C=y
--- a/recipes-kernel/linux/linux-sunxi/olinuxino-a20/defconfig
+++ b/recipes-kernel/linux/linux-sunxi/olinuxino-a20/defconfig
--- a/recipes-kernel/linux/linux-sunxi/olinuxino-a20lime/defconfig
+++ b/recipes-kernel/linux/linux-sunxi/olinuxino-a20lime/defconfig
--- a/recipes-kernel/linux/linux-sunxi/olinuxino-a20lime2/defconfig
+++ b/recipes-kernel/linux/linux-sunxi/olinuxino-a20lime2/defconfig
--- a/recipes-kernel/linux/linux-sunxi/olinuxino-a20som/defconfig
+++ b/recipes-kernel/linux/linux-sunxi/olinuxino-a20som/defconfig
--- a/recipes-kernel/linux/linux-sunxi_3.4.bb
+++ b/recipes-kernel/linux/linux-sunxi_3.4.bb
@ -0,0 +1,55 @@
+require linux.inc
+
+DESCRIPTION = "Linux kernel for Allwinner a10/a20 processors"
+
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
+RDEPENDS_${PN} += "sunxi-board-fex"
+
+PV = "3.4.104"
+PR = "r1"
+SRCREV_pn-${PN} = "d47d367036be38c5180632ec8a3ad169a4593a88"
+
+MACHINE_KERNEL_PR_append = "a"
+
+SRC_URI += "git://github.com/linux-sunxi/linux-sunxi.git;branch=sunxi-3.4;protocol=git \
+        file://0001-compiler-gcc5.patch \
+        file://0002-use-static-inline-in-ARM-ftrace.patch \
+        file://0001-gcc5-fixes.patch \
+        file://defconfig \
+        "
+
+S = "${WORKDIR}/git"
+
+#fix QA issue "Files/directories were installed but not shipped: /usr/src/debug"
+INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
+
+do_configure_prepend() {
+    #fix arch QA issues ("Architecture did not match")
+    rm -f ${S}/drivers/net/wireless/rtxx7x/tools/bin2h
+    rm -f ${S}/modules/wifi/ar6302/AR6K_SDK_ISC.build_3.1_RC.329/host/lib/wac/wac
+    rm -f ${S}/modules/wifi/ar6302/AR6K_SDK_ISC.build_3.1_RC.329/host/tools/pal_host_intf/pal_app
+    rm -f ${S}/modules/wifi/nano-c047.12/obj/hic-proxy
+    rm -f ${S}/modules/wifi/nano-c047.12/obj/x_mac_4.69.axf
+    rm -f ${S}/modules/wifi/nano-c047.12/obj/x_mac_patch_4_65.axf
+    rm -f ${S}/modules/wifi/nano-c047.12/obj/x_mac_4.66.axf
+    rm -f ${S}/modules/wifi/nano-c047.12/obj/x_mac-v4.68.axf
+    rm -f ${S}/modules/wifi/nano-c047.12/obj/x_mac.axf
+    rm -f ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/wl
+    rm -f ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/socket_noasd/x86/wl_server_socket
+    rm -f ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/wifi_noasd/x86/wl_server_serial
+    rm -f ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/wifi_noasd/x86/wl_server_wifi
+    rm -f ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/make/wl
+    rm -f ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/make/socket_noasd/x86/wl_server_socket
+    rm -f ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/make/wifi_noasd/x86/wl_server_serial
+    rm -f ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/make/wifi_noasd/x86/wl_server_wifi
+    rm -f ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/make/dongle_noasd/x86/wl_server_dongle
+    rm -f ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/dongle_noasd/x86/wl_server_dongle
+    rm -f ${S}/modules/wifi/bcm40181/apps/tc_cli
+    rm -f ${S}/modules/wifi/bcm40181/apps/wfa_ca
+    rm -f ${S}/modules/wifi/bcm40181/apps/dhd
+    rm -f ${S}/modules/wifi/bcm40181/apps/ca_cli
+
+    #fix ldflags QA issues ("No GNU_HASH in the elf binary")
+    rm -f ${S}/modules/wifi/usi-bcm4329/v4.218.248.15/apps/epi_ttcp
+    rm -f ${S}/modules/wifi/bcm40181/apps/epi_ttcp
+}
--- a/recipes-kernel/linux/linux.inc
+++ b/recipes-kernel/linux/linux.inc
@ -1,131 +1,131 @@
 DESCRIPTION = "Linux Kernel"
 SECTION = "kernel"
 LICENSE = "GPLv2"
-
 LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"

+INC_PR = "r0"
+
 inherit kernel siteinfo

 # Enable OABI compat for people stuck with obsolete userspace
-ARM_KEEP_OABI ?= "1"
-
-# Quirk for udev greater or equal 141
-UDEV_GE_141 ?= "1"
+ARM_KEEP_OABI ?= "0"

 # Set the verbosity of kernel messages during runtime
 # You can define CMDLINE_DEBUG in your local.conf or distro.conf to override this behaviour
-CMDLINE_DEBUG ?= '${@base_conditional("DISTRO_TYPE", "release", "quiet", "debug", d)}'
-CMDLINE_append = " ${CMDLINE_DEBUG}"
+CMDLINE_DEBUG ?= "loglevel=3"

-# Set a variable in .configure
-# $1 - Configure variable to be set
-# $2 - value [n/y/value]
-kernel_configure_variable() {
-	# Remove the config
-	CONF_SED_SCRIPT="$CONF_SED_SCRIPT /CONFIG_$1[ =]/d;"
-	if test "$2" = "n"
-	then
-		echo "# CONFIG_$1 is not set" >> ${S}/.config
-	else
-		echo "CONFIG_$1=$2" >> ${S}/.config
-	fi
+# Kernel bootlogo is distro-specific (default is OE logo).
+# Logo resolution (qvga, vga, ...) is machine-specific.
+LOGO_SIZE ?= '${@base_conditional("MACHINE_GUI_CLASS", "bigscreen", "vga", "qvga", d)}'
+# To use this, add file://${LOGO_SIZE}/logo_linux_clut224.ppm.bz2 or similar
+# to your kernel recipe, and then structure your logos for each resolution
+# accordingly.
+
+LOCALVERSION ?= ""
+
+#kernel_conf_variable CMDLINE "\"${CMDLINE} ${CMDLINE_DEBUG}\""
+kernel_conf_variable() {
+    CONF_SED_SCRIPT="$CONF_SED_SCRIPT /CONFIG_$1[ =]/d;"
+    if test "$2" = "n"
+    then
+        echo "# CONFIG_$1 is not set" >> ${B}/.config
+    else
+        echo "CONFIG_$1=$2" >> ${B}/.config
+    fi
 }

 do_configure_prepend() {
-	# Clean .config
-	echo "" > ${S}/.config
-	CONF_SED_SCRIPT=""
+    echo "" > ${B}/.config
+    CONF_SED_SCRIPT=""

-	# oabi / eabi support
-	if [ "${TARGET_OS}" = "linux-gnueabi" -o  "${TARGET_OS}" = "linux-uclibceabi" ]; then
-		kernel_configure_variable AEABI y
-		if [ "${ARM_KEEP_OABI}" = "1" ] ; then
-			kernel_configure_variable OABI_COMPAT y
-		else
-			kernel_configure_variable OABI_COMPAT n
-		fi
-	else
-		kernel_configure_variable AEABI n
-		kernel_configure_variable OABI_COMPAT n
-	fi
+    #
+    # logo support, if you supply logo_linux_clut224.ppm in SRC_URI, then it's going to be used
+    #
+    if [ -e ${WORKDIR}/logo_linux_clut224.ppm ]; then
+        install -m 0644 ${WORKDIR}/logo_linux_clut224.ppm drivers/video/logo/logo_linux_clut224.ppm
+        kernel_conf_variable LOGO y
+        kernel_conf_variable LOGO_LINUX_CLUT224 y
+    fi

-	# Set cmdline
-	kernel_configure_variable CMDLINE "\"${CMDLINE}\""
+    #
+    # oabi / eabi support
+    #
+    kernel_conf_variable AEABI y
+    if [ "${ARM_KEEP_OABI}" = "1" ] ; then
+        kernel_conf_variable OABI_COMPAT y
+    else
+        kernel_conf_variable OABI_COMPAT n
+    fi

-	# Localversion
-	kernel_configure_variable LOCALVERSION "\"\""
-	kernel_configure_variable LOCALVERSION_AUTO n
+    # When enabling thumb for userspace we also need thumb support in the kernel
+    if [ "${ARM_INSTRUCTION_SET}" = "thumb" ] ; then
+        kernel_conf_variable ARM_THUMB y
+    fi

-	# Udev quirks
-	# Newer versions of udev mandate that sysfs doesn't have deprecated entries
-	if [ "${UDEV_GE_141}" = "1" ] ; then
-		kernel_configure_variable SYSFS_DEPRECATED n
-		kernel_configure_variable SYSFS_DEPRECATED_V2 n
-		kernel_configure_variable HOTPLUG y
-		kernel_configure_variable UEVENT_HELPER_PATH "\"\""
-		kernel_configure_variable UNIX y
-		kernel_configure_variable SYSFS y
-		kernel_configure_variable PROC_FS y
-		kernel_configure_variable TMPFS y
-		kernel_configure_variable INOTIFY_USER y
-		kernel_configure_variable SIGNALFD y
-		kernel_configure_variable TMPFS_POSIX_ACL y
-		kernel_configure_variable BLK_DEV_BSG y
-		kernel_configure_variable DEVTMPFS y
-		kernel_configure_variable DEVTMPFS_MOUNT y
-	fi
+    kernel_conf_variable CMDLINE "\"${CMDLINE} ${CMDLINE_DEBUG}\""

-	# Newer inits like systemd need cgroup support
-	if [ "${KERNEL_ENABLE_CGROUPS}" = "1" ] ; then
-		kernel_configure_variable CGROUP_SCHED y
-		kernel_configure_variable CGROUPS y
-		kernel_configure_variable CGROUP_NS y
-		kernel_configure_variable CGROUP_FREEZER y
-		kernel_configure_variable CGROUP_DEVICE y
-		kernel_configure_variable CPUSETS y
-		kernel_configure_variable PROC_PID_CPUSET y
-		kernel_configure_variable CGROUP_CPUACCT y
-		kernel_configure_variable RESOURCE_COUNTERS y
-	fi
+    kernel_conf_variable LOCALVERSION "\"${LOCALVERSION}\""
+    kernel_conf_variable LOCALVERSION_AUTO n

-	# root-over-nfs-over-usb-eth support. Limited, but should cover some cases
-	# Enable this by setting a proper CMDLINE_NFSROOT_USB.
-	if [ ! -z "${CMDLINE_NFSROOT_USB}" ]; then
-		oenote "Configuring the kernel for root-over-nfs-over-usb-eth with CMDLINE ${CMDLINE_NFSROOT_USB}"
-		kernel_configure_variable INET y
-		kernel_configure_variable IP_PNP y
-		kernel_configure_variable USB_GADGET y
-		kernel_configure_variable USB_GADGET_SELECTED y
-		kernel_configure_variable USB_ETH y
-		kernel_configure_variable NFS_FS y
-		kernel_configure_variable ROOT_NFS y
-		kernel_configure_variable ROOT_NFS y
-		kernel_configure_variable CMDLINE "\"${CMDLINE_NFSROOT_USB}\""
-	fi
+    kernel_conf_variable SYSFS_DEPRECATED n
+    kernel_conf_variable SYSFS_DEPRECATED_V2 n
+    kernel_conf_variable HOTPLUG y
+    kernel_conf_variable UEVENT_HELPER_PATH \"\"
+    kernel_conf_variable UNIX y
+    kernel_conf_variable SYSFS y
+    kernel_conf_variable PROC_FS y
+    kernel_conf_variable TMPFS y
+    kernel_conf_variable INOTIFY_USER y
+    kernel_conf_variable SIGNALFD y
+    kernel_conf_variable TMPFS_POSIX_ACL y
+    kernel_conf_variable BLK_DEV_BSG y
+    kernel_conf_variable DEVTMPFS y
+    kernel_conf_variable DEVTMPFS_MOUNT y

-	# Activate CONFIG_LEGACY_PTYS
-	kernel_configure_variable LEGACY_PTYS y
+    # Newer inits like systemd need cgroup support
+    if [ "${KERNEL_ENABLE_CGROUPS}" = "1" ] ; then
+        kernel_conf_variable CGROUP_SCHED y
+        kernel_conf_variable CGROUPS y
+        kernel_conf_variable CGROUP_NS y
+        kernel_conf_variable CGROUP_FREEZER y
+        kernel_conf_variable CGROUP_DEVICE y
+        kernel_conf_variable CPUSETS y
+        kernel_conf_variable PROC_PID_CPUSET y
+        kernel_conf_variable CGROUP_CPUACCT y
+        kernel_conf_variable RESOURCE_COUNTERS y
+    fi

-	# Keep this the last line
-	# Remove all modified configs and add the rest to .config
-	sed -e "${CONF_SED_SCRIPT}" < '${WORKDIR}/defconfig' >> '${S}/.config'
+    #
+    # root-over-nfs-over-usb-eth support. Limited, but should cover some cases.
+    # Enable this by setting a proper CMDLINE_NFSROOT_USB.
+    #
+    if [ ! -z "${CMDLINE_NFSROOT_USB}" ]; then
+        bbnote "Configuring the kernel for root-over-nfs-over-usb-eth with CMDLINE ${CMDLINE_NFSROOT_USB}"
+        kernel_conf_variable INET y
+        kernel_conf_variable IP_PNP y
+        kernel_conf_variable USB_GADGET y
+        kernel_conf_variable USB_GADGET_SELECTED y
+        kernel_conf_variable USB_ETH y
+        kernel_conf_variable NFS_FS y
+        kernel_conf_variable ROOT_NFS y
+        kernel_conf_variable CMDLINE \"${CMDLINE_NFSROOT_USB} ${CMDLINE_DEBUG}\"
+    fi

-	yes '' | oe_runmake oldconfig
+    sed -e "${CONF_SED_SCRIPT}" \
+    < '${WORKDIR}/defconfig' >>'${B}/.config'
+
+    yes '' | oe_runmake -C ${S} O=${B} oldconfig
 }

-# Automatically depend on lzop-native if CONFIG_KERNEL_LZO is enabled
-python () {
-    try:
-        defconfig = bb.fetch2.localpath('file://defconfig', d)
-    except bb.fetch2.FetchError:
-        return
-
-    try:
-        configfile = open(defconfig)
-    except IOError:
-        return
-
-    if 'CONFIG_KERNEL_LZO=y\n' in configfile.readlines():
-        depends = d.getVar('DEPENDS', False)
-        d.setVar('DEPENDS', depends + ' lzop-native')
+do_configure_append() {
+    if test -e scripts/Makefile.fwinst ; then
+        sed -i -e "s:-m0644:-m 0644:g" scripts/Makefile.fwinst
+    fi
 }
+
+do_install_append() {
+    oe_runmake headers_install INSTALL_HDR_PATH=${D}${exec_prefix}/src/linux-${KERNEL_VERSION} ARCH=$ARCH
+}
+
+PACKAGES =+ "kernel-headers"
+FILES_kernel-headers = "${exec_prefix}/src/linux*"
--- a/recipes-kernel/linux/linux/defconfig
+++ b/recipes-kernel/linux/linux/defconfig
@ -0,0 +1,747 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CGROUPS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_BPF_SYSCALL=y
+CONFIG_PERF_EVENTS=y
+CONFIG_MODULES=y
+CONFIG_BLK_DEV_BSGLIB=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
+CONFIG_LDM_PARTITION=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=8
+CONFIG_AEABI=y
+CONFIG_HIGHMEM=y
+CONFIG_HIGHPTE=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPUFREQ_DT=y
+CONFIG_CPU_IDLE=y
+CONFIG_ARM_CPUIDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_KERNEL_MODE_NEON=y
+CONFIG_HIBERNATION=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=m
+CONFIG_UNIX=y
+CONFIG_UNIX_DIAG=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_FIB_TRIE_STATS=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE_DEMUX=m
+CONFIG_NET_IPGRE=m
+CONFIG_NET_FOU=m
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_INET_LRO=m
+CONFIG_INET_DIAG=m
+CONFIG_INET_UDP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+CONFIG_TCP_CONG_DCTCP=m
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_IPV6_VTI=m
+CONFIG_IPV6_GRE=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+CONFIG_IPV6_MROUTE_MULTIPLE_TABLES=y
+CONFIG_IPV6_PIMSM_V2=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CONNTRACK_TIMEOUT=y
+CONFIG_NF_CONNTRACK_TIMESTAMP=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NF_CT_NETLINK_HELPER=m
+CONFIG_NETFILTER_NETLINK_QUEUE_CT=y
+CONFIG_NF_TABLES=m
+CONFIG_NF_TABLES_INET=m
+CONFIG_NFT_EXTHDR=m
+CONFIG_NFT_META=m
+CONFIG_NFT_CT=m
+CONFIG_NFT_RBTREE=m
+CONFIG_NFT_HASH=m
+CONFIG_NFT_COUNTER=m
+CONFIG_NFT_LOG=m
+CONFIG_NFT_LIMIT=m
+CONFIG_NFT_MASQ=m
+CONFIG_NFT_REDIR=m
+CONFIG_NFT_NAT=m
+CONFIG_NFT_QUEUE=m
+CONFIG_NFT_REJECT=m
+CONFIG_NFT_COMPAT=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CGROUP=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPCOMP=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+CONFIG_IP_VS_DEBUG=y
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+CONFIG_IP_VS_PROTO_SCTP=y
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_FO=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+CONFIG_IP_VS_FTP=m
+CONFIG_IP_VS_PE_SIP=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NFT_CHAIN_ROUTE_IPV4=m
+CONFIG_NF_TABLES_ARP=m
+CONFIG_NF_LOG_ARP=m
+CONFIG_NFT_CHAIN_NAT_IPV4=m
+CONFIG_NFT_MASQ_IPV4=m
+CONFIG_NFT_REDIR_IPV4=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_SYNPROXY=m
+CONFIG_IP_NF_NAT=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_NFT_CHAIN_ROUTE_IPV6=m
+CONFIG_NFT_CHAIN_NAT_IPV6=m
+CONFIG_NFT_MASQ_IPV6=m
+CONFIG_NFT_REDIR_IPV6=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_SYNPROXY=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_IP6_NF_NAT=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_L2TP=m
+CONFIG_BRIDGE=m
+CONFIG_BRIDGE_VLAN_FILTERING=y
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+CONFIG_VLAN_8021Q_MVRP=y
+CONFIG_6LOWPAN=m
+CONFIG_IEEE802154=m
+CONFIG_IEEE802154_6LOWPAN=m
+CONFIG_MAC802154=m
+CONFIG_NET_SCHED=y
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=y
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFB=m
+CONFIG_NET_SCH_SFQ=y
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+CONFIG_NET_SCH_MQPRIO=m
+CONFIG_NET_SCH_CHOKE=m
+CONFIG_NET_SCH_QFQ=m
+CONFIG_NET_SCH_CODEL=m
+CONFIG_NET_SCH_FQ_CODEL=y
+CONFIG_NET_SCH_FQ=m
+CONFIG_NET_SCH_HHF=m
+CONFIG_NET_SCH_PIE=y
+CONFIG_NET_SCH_PLUG=m
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+CONFIG_NET_CLS_CGROUP=m
+CONFIG_NET_CLS_BPF=m
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+CONFIG_NET_ACT_VLAN=m
+CONFIG_NET_ACT_BPF=m
+CONFIG_NET_ACT_CONNMARK=m
+CONFIG_VSOCKETS=m
+CONFIG_NETLINK_MMAP=y
+CONFIG_NETLINK_DIAG=y
+CONFIG_BPF_JIT=y
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_ATH3K=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIUART_3WIRE=y
+CONFIG_BT_HCIUART_INTEL=y
+CONFIG_BT_HCIUART_BCM=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+CONFIG_BT_ATH3K=m
+CONFIG_CFG80211=m
+CONFIG_CFG80211_WEXT=y
+CONFIG_MAC80211=m
+CONFIG_MAC80211_MESH=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP_MIN_COUNT=0
+CONFIG_BLK_DEV_NBD=m
+CONFIG_BLK_DEV_RAM=m
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_WCACHE=y
+CONFIG_EEPROM_SUNXI_SID=y
+CONFIG_SCSI_MQ_DEFAULT=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_ATA=y
+CONFIG_AHCI_SUNXI=y
+CONFIG_MD=y
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BCACHE=m
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_MQ_DEFAULT=y
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_CACHE=m
+CONFIG_DM_ERA=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_LOG_USERSPACE=m
+CONFIG_DM_RAID=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_DM_MULTIPATH_QL=m
+CONFIG_DM_MULTIPATH_ST=m
+CONFIG_DM_DELAY=m
+CONFIG_DM_UEVENT=y
+CONFIG_DM_FLAKEY=m
+CONFIG_DM_VERITY=m
+CONFIG_DM_SWITCH=m
+CONFIG_DM_LOG_WRITES=m
+CONFIG_NETDEVICES=y
+CONFIG_BONDING=m
+CONFIG_DUMMY=m
+CONFIG_NET_TEAM=m
+CONFIG_NET_TEAM_MODE_BROADCAST=m
+CONFIG_NET_TEAM_MODE_ROUNDROBIN=m
+CONFIG_NET_TEAM_MODE_RANDOM=m
+CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m
+CONFIG_NET_TEAM_MODE_LOADBALANCE=m
+CONFIG_MACVLAN=m
+CONFIG_MACVTAP=m
+CONFIG_IPVLAN=m
+CONFIG_VXLAN=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+CONFIG_NLMON=m
+CONFIG_SUN4I_EMAC=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+CONFIG_STMMAC_ETH=y
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=m
+CONFIG_PPTP=m
+CONFIG_PPPOL2TP=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_LIBERTAS_THINFIRM=m
+CONFIG_LIBERTAS_THINFIRM_USB=m
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8187=m
+CONFIG_ATH_CARDS=m
+CONFIG_ATH9K=m
+CONFIG_ATH9K_AHB=y
+CONFIG_ATH9K_CHANNEL_CONTEXT=y
+CONFIG_ATH9K_HTC=m
+CONFIG_CARL9170=m
+CONFIG_ATH6KL=m
+CONFIG_ATH6KL_SDIO=m
+CONFIG_ATH6KL_USB=m
+CONFIG_AR5523=m
+CONFIG_ATH10K=m
+CONFIG_WCN36XX=m
+CONFIG_B43=m
+CONFIG_B43_SDIO=y
+CONFIG_BRCMFMAC=m
+CONFIG_BRCMFMAC_USB=y
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_LIBERTAS_SPI=m
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_SPI=m
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT3573=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_RT55XX=y
+CONFIG_RT2800USB_UNKNOWN=y
+CONFIG_RTL8192CU=m
+CONFIG_WL_TI=y
+CONFIG_WL1251=m
+CONFIG_WL1251_SPI=m
+CONFIG_WL1251_SDIO=m
+CONFIG_WL12XX=m
+CONFIG_WL18XX=m
+CONFIG_WLCORE_SPI=m
+CONFIG_WLCORE_SDIO=m
+CONFIG_ZD1211RW=m
+CONFIG_MWIFIEX=m
+CONFIG_MWIFIEX_SDIO=m
+CONFIG_MWIFIEX_USB=m
+CONFIG_CW1200=m
+CONFIG_CW1200_WLAN_SDIO=m
+CONFIG_CW1200_WLAN_SPI=m
+CONFIG_RSI_91X=m
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_SUN4I=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AXP20X_PEK=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=8
+CONFIG_SERIAL_8250_RUNTIME_UARTS=8
+CONFIG_SERIAL_8250_DW=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MV64XXX=y
+CONFIG_I2C_SUN6I_P2WI=y
+CONFIG_SPI=y
+CONFIG_SPI_SUN4I=y
+CONFIG_SPI_SUN6I=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_RESET=y
+CONFIG_THERMAL=y
+CONFIG_CPU_THERMAL=y
+CONFIG_WATCHDOG=y
+CONFIG_SUNXI_WATCHDOG=y
+CONFIG_MFD_AXP20X=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_AXP20X=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_ANALOG_TV_SUPPORT=y
+CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y
+CONFIG_MEDIA_RADIO_SUPPORT=y
+CONFIG_MEDIA_SDR_SUPPORT=y
+CONFIG_MEDIA_RC_SUPPORT=y
+CONFIG_MEDIA_CONTROLLER=y
+CONFIG_VIDEO_ADV_DEBUG=y
+CONFIG_DVB_DYNAMIC_MINORS=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_M5602=m
+CONFIG_USB_STV06XX=m
+CONFIG_USB_GL860=m
+CONFIG_USB_GSPCA_BENQ=m
+CONFIG_USB_GSPCA_CONEX=m
+CONFIG_USB_GSPCA_CPIA1=m
+CONFIG_USB_GSPCA_DTCS033=m
+CONFIG_USB_GSPCA_ETOMS=m
+CONFIG_USB_GSPCA_FINEPIX=m
+CONFIG_USB_GSPCA_JEILINJ=m
+CONFIG_USB_GSPCA_JL2005BCD=m
+CONFIG_USB_GSPCA_KINECT=m
+CONFIG_USB_GSPCA_KONICA=m
+CONFIG_USB_GSPCA_MARS=m
+CONFIG_USB_GSPCA_MR97310A=m
+CONFIG_USB_GSPCA_NW80X=m
+CONFIG_USB_GSPCA_OV519=m
+CONFIG_USB_GSPCA_OV534=m
+CONFIG_USB_GSPCA_OV534_9=m
+CONFIG_USB_GSPCA_PAC207=m
+CONFIG_USB_GSPCA_PAC7302=m
+CONFIG_USB_GSPCA_PAC7311=m
+CONFIG_USB_GSPCA_SE401=m
+CONFIG_USB_GSPCA_SN9C2028=m
+CONFIG_USB_GSPCA_SN9C20X=m
+CONFIG_USB_GSPCA_SONIXB=m
+CONFIG_USB_GSPCA_SONIXJ=m
+CONFIG_USB_GSPCA_SPCA500=m
+CONFIG_USB_GSPCA_SPCA501=m
+CONFIG_USB_GSPCA_SPCA505=m
+CONFIG_USB_GSPCA_SPCA506=m
+CONFIG_USB_GSPCA_SPCA508=m
+CONFIG_USB_GSPCA_SPCA561=m
+CONFIG_USB_GSPCA_SPCA1528=m
+CONFIG_USB_GSPCA_SQ905=m
+CONFIG_USB_GSPCA_SQ905C=m
+CONFIG_USB_GSPCA_SQ930X=m
+CONFIG_USB_GSPCA_STK014=m
+CONFIG_USB_GSPCA_STK1135=m
+CONFIG_USB_GSPCA_STV0680=m
+CONFIG_USB_GSPCA_SUNPLUS=m
+CONFIG_USB_GSPCA_T613=m
+CONFIG_USB_GSPCA_TOPRO=m
+CONFIG_USB_GSPCA_TOUPTEK=m
+CONFIG_USB_GSPCA_TV8532=m
+CONFIG_USB_GSPCA_VC032X=m
+CONFIG_USB_GSPCA_VICAM=m
+CONFIG_USB_GSPCA_XIRLINK_CIT=m
+CONFIG_USB_GSPCA_ZC3XX=m
+CONFIG_USB_PWC=m
+CONFIG_VIDEO_CPIA2=m
+CONFIG_USB_ZR364XX=m
+CONFIG_USB_STKWEBCAM=m
+CONFIG_USB_S2255=m
+CONFIG_VIDEO_PVRUSB2=m
+CONFIG_VIDEO_HDPVR=m
+CONFIG_VIDEO_USBVISION=m
+CONFIG_VIDEO_STK1160_COMMON=m
+CONFIG_VIDEO_AU0828=m
+CONFIG_VIDEO_AU0828_RC=y
+CONFIG_VIDEO_CX231XX=m
+CONFIG_VIDEO_CX231XX_DVB=m
+CONFIG_VIDEO_TM6000=m
+CONFIG_VIDEO_TM6000_DVB=m
+CONFIG_DVB_USB=m
+CONFIG_DVB_USB_A800=m
+CONFIG_DVB_USB_DIBUSB_MB=m
+CONFIG_DVB_USB_DIBUSB_MC=m
+CONFIG_DVB_USB_DIB0700=m
+CONFIG_DVB_USB_UMT_010=m
+CONFIG_DVB_USB_CXUSB=m
+CONFIG_DVB_USB_M920X=m
+CONFIG_DVB_USB_DIGITV=m
+CONFIG_DVB_USB_VP7045=m
+CONFIG_DVB_USB_VP702X=m
+CONFIG_DVB_USB_GP8PSK=m
+CONFIG_DVB_USB_NOVA_T_USB2=m
+CONFIG_DVB_USB_TTUSB2=m
+CONFIG_DVB_USB_DTT200U=m
+CONFIG_DVB_USB_OPERA1=m
+CONFIG_DVB_USB_AF9005=m
+CONFIG_DVB_USB_AF9005_REMOTE=m
+CONFIG_DVB_USB_PCTV452E=m
+CONFIG_DVB_USB_DW2102=m
+CONFIG_DVB_USB_CINERGY_T2=m
+CONFIG_DVB_USB_DTV5100=m
+CONFIG_DVB_USB_FRIIO=m
+CONFIG_DVB_USB_AZ6027=m
+CONFIG_DVB_USB_TECHNISAT_USB2=m
+CONFIG_DVB_USB_V2=m
+CONFIG_DVB_USB_AF9015=m
+CONFIG_DVB_USB_AF9035=m
+CONFIG_DVB_USB_ANYSEE=m
+CONFIG_DVB_USB_AU6610=m
+CONFIG_DVB_USB_AZ6007=m
+CONFIG_DVB_USB_CE6230=m
+CONFIG_DVB_USB_EC168=m
+CONFIG_DVB_USB_GL861=m
+CONFIG_DVB_USB_LME2510=m
+CONFIG_DVB_USB_MXL111SF=m
+CONFIG_DVB_USB_RTL28XXU=m
+CONFIG_DVB_USB_DVBSKY=m
+CONFIG_SMS_USB_DRV=m
+CONFIG_DVB_B2C2_FLEXCOP_USB=m
+CONFIG_DVB_AS102=m
+CONFIG_USB_AIRSPY=m
+CONFIG_USB_HACKRF=m
+CONFIG_USB_MSI2500=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=m
+CONFIG_SOC_CAMERA_PLATFORM=m
+CONFIG_V4L_MEM2MEM_DRIVERS=y
+CONFIG_V4L_TEST_DRIVERS=y
+CONFIG_VIDEO_VIVID=m
+CONFIG_VIDEO_VIM2M=m
+CONFIG_SMS_SDIO_DRV=m
+CONFIG_RADIO_SI470X=y
+CONFIG_USB_SI470X=m
+CONFIG_I2C_SI470X=m
+CONFIG_RADIO_SI4713=m
+CONFIG_USB_SI4713=m
+CONFIG_PLATFORM_SI4713=m
+CONFIG_USB_MR800=m
+CONFIG_USB_DSBR=m
+CONFIG_RADIO_SHARK=m
+CONFIG_RADIO_SHARK2=m
+CONFIG_USB_KEENE=m
+CONFIG_USB_RAREMONO=m
+CONFIG_USB_MA901=m
+CONFIG_RADIO_TEA5764=m
+CONFIG_RADIO_SAA7706H=m
+CONFIG_RADIO_TEF6862=m
+CONFIG_RADIO_WL1273=m
+CONFIG_SOC_CAMERA_IMX074=m
+CONFIG_SOC_CAMERA_MT9M001=m
+CONFIG_SOC_CAMERA_MT9M111=m
+CONFIG_SOC_CAMERA_MT9T031=m
+CONFIG_SOC_CAMERA_MT9T112=m
+CONFIG_SOC_CAMERA_MT9V022=m
+CONFIG_SOC_CAMERA_OV2640=m
+CONFIG_SOC_CAMERA_OV5642=m
+CONFIG_SOC_CAMERA_OV6650=m
+CONFIG_SOC_CAMERA_OV772X=m
+CONFIG_SOC_CAMERA_OV9640=m
+CONFIG_SOC_CAMERA_OV9740=m
+CONFIG_SOC_CAMERA_RJ54N1=m
+CONFIG_SOC_CAMERA_TW9910=m
+CONFIG_FB=y
+CONFIG_FB_SIMPLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_MMC=y
+CONFIG_MMC_SUNXI=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_CLASS_FLASH=y
+CONFIG_LEDS_LM3530=m
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_LP3944=m
+CONFIG_LEDS_LP5521=m
+CONFIG_LEDS_LP5523=m
+CONFIG_LEDS_LP5562=m
+CONFIG_LEDS_LP8501=m
+CONFIG_LEDS_PCA955X=m
+CONFIG_LEDS_PCA963X=m
+CONFIG_LEDS_DAC124S085=m
+CONFIG_LEDS_REGULATOR=y
+CONFIG_LEDS_BD2802=m
+CONFIG_LEDS_LT3593=m
+CONFIG_LEDS_TCA6507=m
+CONFIG_LEDS_LM355x=m
+CONFIG_LEDS_BLINKM=m
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_TRANSIENT=y
+CONFIG_LEDS_TRIGGER_CAMERA=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_INTF_SYSFS is not set
+# CONFIG_RTC_INTF_PROC is not set
+CONFIG_RTC_DRV_SUN6I=y
+CONFIG_RTC_DRV_SUNXI=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_SUN6I=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXTCON=y
+CONFIG_PWM=y
+CONFIG_PWM_SUN4I=y
+CONFIG_PHY_SUN4I_USB=y
+CONFIG_PHY_SUN9I_USB=y
+CONFIG_EXT4_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_CRYPTO_DEV_SUN4I_SS=y
+CONFIG_ARM_CRYPTO=y
+CONFIG_CRYPTO_SHA1_ARM_NEON=y
+CONFIG_CRYPTO_SHA256_ARM=y
+CONFIG_CRYPTO_SHA512_ARM_NEON=y
+CONFIG_CRYPTO_AES_ARM_BS=y
--- a/recipes-kernel/linux/linux_3.4.bb
+++ b/recipes-kernel/linux/linux_3.4.bb
@ -1,56 +0,0 @@
-require linux.inc
-
-DESCRIPTION = "Linux kernel for Allwinner a10/a20 processors"
-
-COMPATIBLE_MACHINE = "(mele|meleg|olinuxino-a13|olinuxino-a10s|olinuxino-a10|olinuxino-a20|olinuxino-a20som|olinuxino-a20lime|cubieboard|cubieboard2|cubietruck)"
-
-PV = "3.4.90"
-PR = "r1"
-# Last tested version by myself
-SRCREV_pn-${PN} = "e37d760b363888f3a65cd6455c99a75cac70a7b8"
-
-MACHINE_KERNEL_PR_append = "a"
-
-SRC_URI += "git://github.com/linux-sunxi/linux-sunxi.git;branch=sunxi-3.4;protocol=git \
-        http://archlinuxarm.org/builder/src/0001-cgroup-add-xattr-support-sunxi.patch;name=cgroup-patch \
-        file://defconfig \
-        "
-
-SRC_URI[cgroup-patch.md5sum] = "4aa5087e3396f3179b61ccd478e9e604"
-SRC_URI[cgroup-patch.sha256sum] = "f9f9cb55eb6f8abf322830afd7a5f4a090e539add75e0ed1f1016b5351a9b533"
-
-S = "${WORKDIR}/git"
-
-#fix QA issue "Files/directories were installed but not shipped: /usr/src/debug"
-INHIBIT_PACKAGE_DEBUG_SPLIT = "1"
-
-do_configure_prepend() {
-    #fix arch QA issues ("Architecture did not match")
-    rm ${S}/drivers/net/wireless/rtxx7x/tools/bin2h
-    rm ${S}/modules/wifi/ar6302/AR6K_SDK_ISC.build_3.1_RC.329/host/lib/wac/wac
-    rm ${S}/modules/wifi/ar6302/AR6K_SDK_ISC.build_3.1_RC.329/host/tools/pal_host_intf/pal_app
-    rm ${S}/modules/wifi/nano-c047.12/obj/hic-proxy
-    rm ${S}/modules/wifi/nano-c047.12/obj/x_mac_4.69.axf
-    rm ${S}/modules/wifi/nano-c047.12/obj/x_mac_patch_4_65.axf
-    rm ${S}/modules/wifi/nano-c047.12/obj/x_mac_4.66.axf
-    rm ${S}/modules/wifi/nano-c047.12/obj/x_mac-v4.68.axf
-    rm ${S}/modules/wifi/nano-c047.12/obj/x_mac.axf
-    rm ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/wl
-    rm ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/socket_noasd/x86/wl_server_socket
-    rm ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/wifi_noasd/x86/wl_server_serial
-    rm ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/wifi_noasd/x86/wl_server_wifi
-    rm ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/make/wl
-    rm ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/make/socket_noasd/x86/wl_server_socket
-    rm ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/make/wifi_noasd/x86/wl_server_serial
-    rm ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/make/wifi_noasd/x86/wl_server_wifi
-    rm ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/make/dongle_noasd/x86/wl_server_dongle
-    rm ${S}/modules/wifi/bcm40181/open-src/src/wl/exe/dongle_noasd/x86/wl_server_dongle
-    rm ${S}/modules/wifi/bcm40181/apps/tc_cli
-    rm ${S}/modules/wifi/bcm40181/apps/wfa_ca
-    rm ${S}/modules/wifi/bcm40181/apps/dhd
-    rm ${S}/modules/wifi/bcm40181/apps/ca_cli
-
-    #fix ldflags QA issues ("No GNU_HASH in the elf binary")
-    rm ${S}/modules/wifi/usi-bcm4329/v4.218.248.15/apps/epi_ttcp
-    rm ${S}/modules/wifi/bcm40181/apps/epi_ttcp
-}
--- a/recipes-kernel/linux/linux_4.1.15.bb
+++ b/recipes-kernel/linux/linux_4.1.15.bb
@ -0,0 +1,24 @@
+SECTION = "kernel"
+DESCRIPTION = "Mainline Linux kernel"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
+
+inherit kernel
+
+require recipes-kernel/linux/linux-dtb.inc
+require linux.inc
+
+# Pull in the devicetree files into the rootfs
+RDEPENDS_kernel-base += "kernel-devicetree"
+
+KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
+
+S = "${WORKDIR}/linux-${PV}"
+	
+SRC_URI[md5sum] = "b227333912b161c96ff3e30f5041e1c0"
+SRC_URI[sha256sum] = "472288cc966188c5d7c511c6be0f78682843c9ca2d5d6c4d67d77455680359a3"
+
+SRC_URI = "https://www.kernel.org/pub/linux/kernel/v4.x/linux-${PV}.tar.xz \
+        file://defconfig \
+        "
--- a/recipes-kernel/linux/linux_git.bb
+++ b/recipes-kernel/linux/linux_git.bb
@ -0,0 +1,28 @@
+SECTION = "kernel"
+DESCRIPTION = "Mainline Linux kernel"
+LICENSE = "GPLv2"
+LIC_FILES_CHKSUM = "file://COPYING;md5=d7810fab7487fb0aad327b76f1be7cd7"
+COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
+
+inherit kernel
+
+require recipes-kernel/linux/linux-dtb.inc
+require linux.inc
+
+# Pull in the devicetree files into the rootfs
+RDEPENDS_kernel-base += "kernel-devicetree"
+
+# Default is to use stable kernel version
+# If you want to use latest git version set to "1"
+DEFAULT_PREFERENCE = "-1" 
+
+KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"
+	
+# 4.4 rc5
+PV = "4.3+4.4rc5.git${SRCPV}"
+SRCREV_pn-${PN} = "9f9499ae8e6415cefc4fe0a96ad0e27864353c89"
+
+SRC_URI = "git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git;protocol=git;branch=master \
+        file://defconfig \
+        "
+S = "${WORKDIR}/git"
--- a/recipes-support/sunxi-tools/sunxi-tools_git.bb
+++ b/recipes-support/sunxi-tools/sunxi-tools_git.bb
@ -6,7 +6,7 @@ LIC_FILES_CHKSUM = "file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263"
 PV = "1.0+git${SRCPV}"
 PKGV = "1.0+git${GITPKGV}"
 PR = "r3"
-SRCREV = "ed6f7969d80b91048b0ed95ccb61cc98f46fead7"
+SRCREV = "568c7a0e81fc5d52189710c6d832677aa8770b16"

 DEPENDS += "libusb"

@ -31,5 +31,4 @@ do_install() {
    install -m 755 ${S}/fexc ${D}/${bindir}
    install -m 755 ${S}/nand-part ${D}/${bindir}
    install -m 755 ${S}/pio ${D}/${bindir}
-    install -m 755 ${S}/usb-boot ${D}/${bindir}
 }