Merge remote-tracking branch 'origin/master' into hardknott

default to 'boot' as boot partition label
Defaulting to the $MACHINE may lead to failure if the name was longer than the limit of allowed volume label of fat (11 chars). Signed-off-by: Marius Kriegerowski <marius.kriegerowski@gmail.com>
2025-07-16 22:09:47 +02:00 · 2021-09-20 09:25:30 +02:00 · 2021-05-17 13:30:02 +02:00
72 changed files with 350 additions and 234052 deletions
--- a/README.md
+++ b/README.md
@ -6,7 +6,6 @@ Official sunxi OpenEmbedded layer for Allwinner-based boards.
 This layer depends on the additional layers:

 * [meta-openembedded/meta-oe](http://git.openembedded.org/meta-openembedded/tree/meta-oe)
-* [meta-arm](https://git.yoctoproject.org/meta-arm)

 Tested with core-image-base.

@ -17,11 +16,6 @@ Maintainers:
 * Sergey Lapin <slapin@ossfans.org>
 * Marek Belisko <marek.belisko@gmail.com>

-Community
-===========
-
-You can reach community + ask your question on gitter: https://matrix.to/#/#meta-sunxi:gitter.im
-
 Kernel / U-Boot Version
 ===========
 Most Allwinner devices and hardware are supported in mainline kernel and U-Boot, so this layer builds mainline by default.
--- a/classes/sdcard_image-sunxi.bbclass
+++ b/classes/sdcard_image-sunxi.bbclass
@ -0,0 +1,128 @@
+inherit image_types
+
+#
+# Create an image that can by written onto a SD card using dd.
+# Originally written for rasberrypi adapt for the needs of allwinner sunxi based boards
+#
+# The disk layout used is:
+#
+#    0                      -> 8*1024                           - reserverd
+#    8*1024                 ->                                  - arm combined spl/u-boot or aarch64 spl
+#    40*1024                ->                                  - aarch64 u-boot
+#    2048*1024              -> BOOT_SPACE                       - bootloader and kernel
+#
+#
+
+# This image depends on the rootfs image
+IMAGE_TYPEDEP_sunxi-sdimg = "${SDIMG_ROOTFS_TYPE}"
+
+# Boot partition volume id
+BOOTDD_VOLUME_ID ?= "boot"
+
+# Boot partition size [in KiB]
+BOOT_SPACE ?= "40960"
+
+# First partition begin at sector 2048 : 2048*1024 = 2097152
+IMAGE_ROOTFS_ALIGNMENT = "2048"
+
+# Use an uncompressed ext4 by default as rootfs
+SDIMG_ROOTFS_TYPE ?= "ext4"
+SDIMG_ROOTFS = "${IMGDEPLOYDIR}/${IMAGE_NAME}.rootfs.${SDIMG_ROOTFS_TYPE}"
+
+do_image_sunxi_sdimg[depends] += " \
+			parted-native:do_populate_sysroot \
+			mtools-native:do_populate_sysroot \
+			dosfstools-native:do_populate_sysroot \
+			virtual/kernel:do_deploy \
+			virtual/bootloader:do_deploy \
+			"
+
+# SD card image name
+SDIMG = "${IMGDEPLOYDIR}/${IMAGE_NAME}.rootfs.sunxi-sdimg"
+
+IMAGE_CMD_sunxi-sdimg () {
+
+	# Align partitions
+	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
+	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT})
+	SDIMG_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $ROOTFS_SIZE + ${IMAGE_ROOTFS_ALIGNMENT})
+
+	# Initialize sdcard image file
+	dd if=/dev/zero of=${SDIMG} bs=1 count=0 seek=$(expr 1024 \* ${SDIMG_SIZE})
+
+	# Create partition table
+	parted -s ${SDIMG} mklabel msdos
+	# Create boot partition and mark it as bootable
+	parted -s ${SDIMG} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT})
+	parted -s ${SDIMG} set 1 boot on
+	# Create rootfs partition
+	parted -s ${SDIMG} unit KiB mkpart primary ext2 $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT}) $(expr ${BOOT_SPACE_ALIGNED} \+ ${IMAGE_ROOTFS_ALIGNMENT} \+ ${ROOTFS_SIZE})
+	parted ${SDIMG} print
+
+	# Create a vfat image with boot files
+	BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDIMG} unit b print | awk '/ 1 / { print substr($4, 1, length($4 -1)) / 512 /2 }')
+	rm -f ${WORKDIR}/boot.img
+	mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 -C ${WORKDIR}/boot.img $BOOT_BLOCKS
+
+	mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::${KERNEL_IMAGETYPE}
+
+	# Copy device tree file
+	if test -n "${KERNEL_DEVICETREE}"; then
+		for DTS_FILE in ${KERNEL_DEVICETREE}; do
+			DTS_BASE_NAME=`basename ${DTS_FILE} | awk -F "." '{print $1}'`
+			DTS_DIR_NAME=`dirname ${DTS_FILE}`
+			if [ -e ${DEPLOY_DIR_IMAGE}/"${DTS_BASE_NAME}.dtb" ]; then
+
+				if [ ${DTS_FILE} != ${DTS_BASE_NAME}.dtb ]; then
+					mmd -i ${WORKDIR}/boot.img ::/${DTS_DIR_NAME}
+				fi
+
+				kernel_bin="`readlink ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin`"
+				kernel_bin_for_dtb="`readlink ${DEPLOY_DIR_IMAGE}/${DTS_BASE_NAME}.dtb | sed "s,$DTS_BASE_NAME,${KERNEL_IMAGETYPE},g;s,\.dtb$,.bin,g"`"
+				if [ $kernel_bin = $kernel_bin_for_dtb ]; then
+					mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${DTS_BASE_NAME}.dtb ::/${DTS_FILE}
+				fi
+			fi
+		done
+	fi
+
+	if [ -e "${DEPLOY_DIR_IMAGE}/fex.bin" ]
+	then
+		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/fex.bin ::script.bin
+	fi
+	if [ -e "${DEPLOY_DIR_IMAGE}/boot.scr" ]
+	then
+		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/boot.scr ::boot.scr
+	fi
+        if [ -e "${DEPLOY_DIR_IMAGE}/splash.bmp" ]
+        then
+                mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/splash.bmp ::splash.bmp
+        fi
+
+
+	# Add stamp file
+	echo "${IMAGE_NAME}" > ${WORKDIR}/image-version-info
+	mcopy -i ${WORKDIR}/boot.img -v ${WORKDIR}/image-version-info ::
+
+	# Burn Partitions
+	dd if=${WORKDIR}/boot.img of=${SDIMG} conv=notrunc seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
+	# If SDIMG_ROOTFS_TYPE is a .xz file use xzcat
+	if echo "${SDIMG_ROOTFS_TYPE}" | egrep -q "*\.xz"
+	then
+		xzcat ${SDIMG_ROOTFS} | dd of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
+	else
+		dd if=${SDIMG_ROOTFS} of=${SDIMG} conv=notrunc seek=1 bs=$(expr 1024 \* ${BOOT_SPACE_ALIGNED} + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024) && sync && sync
+	fi
+
+	# write u-boot-spl at the begining of sdcard in one shot
+	SPL_FILE=$(basename ${SPL_BINARY})
+	dd if=${DEPLOY_DIR_IMAGE}/${SPL_FILE} of=${SDIMG} bs=1024 seek=8 conv=notrunc
+}
+
+# write uboot.itb for arm64 boards
+IMAGE_CMD_sunxi-sdimg_append_sun50i () {
+	if [ -e "${DEPLOY_DIR_IMAGE}/${UBOOT_BINARY}" ]
+	then
+		dd if=${DEPLOY_DIR_IMAGE}/${UBOOT_BINARY} of=${SDIMG} bs=1024 seek=40 conv=notrunc
+	fi
+}
--- a/conf/layer.conf
+++ b/conf/layer.conf
@ -4,14 +4,14 @@ BBPATH .= ":${LAYERDIR}"
 # We have a recipes directory, add to BBFILES
 BBFILES += "${LAYERDIR}/recipes*/*/*.bb ${LAYERDIR}/recipes*/*/*.bbappend"

-BBFILE_COLLECTIONS += "sunxi"
-BBFILE_PATTERN_sunxi := "^${LAYERDIR}/"
-BBFILE_PRIORITY_sunxi = "10"
+BBFILE_COLLECTIONS += "meta-sunxi"
+BBFILE_PATTERN_meta-sunxi := "^${LAYERDIR}/"
+BBFILE_PRIORITY_meta-sunxi = "10"

 # This should only be incremented on significant changes that will
 # cause compatibility issues with other layers
-LAYERVERSION_sunxi = "1"
+LAYERVERSION_meta-sunxi = "1"

-LAYERDEPENDS_sunxi = "core meta-python meta-arm"
+LAYERDEPENDS_meta-sunxi = "core openembedded-layer"

-LAYERSERIES_COMPAT_sunxi = "honister kirkstone langdale mickledore"
+LAYERSERIES_COMPAT_meta-sunxi = "zeus dunfell gatesgarth hardknott"
--- a/conf/machine/bananapi-m2-zero.conf
+++ b/conf/machine/bananapi-m2-zero.conf
@ -1,10 +0,0 @@
-#@TYPE: Machine
-#@NAME: bananapi-m2-zero
-#@DESCRIPTION: Machine configuration for the Banana Pi M2 Zero, base on Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-require conf/machine/include/hardware/ap6212a.inc
-
-KERNEL_DEVICETREE = "sun8i-h2-plus-bananapi-m2-zero.dtb"
-UBOOT_MACHINE = "bananapi_m2_zero_defconfig"
-
--- a/conf/machine/include/hardware/ap6212a.inc
+++ b/conf/machine/include/hardware/ap6212a.inc
@ -1,5 +1,5 @@
 # Include for boards with AMPAK 6212A Wifi / Bluetooth module
 # https://linux-sunxi.org/Wifi#Ampak

-MACHINE_EXTRA_RRECOMMENDS:append = " kernel-module-brcmfmac"
-MACHINE_EXTRA_RDEPENDS:append = " linux-firmware-bcm43430"
+MACHINE_EXTRA_RRECOMMENDS_append = " kernel-module-brcmfmac"
+MACHINE_EXTRA_RDEPENDS_append = " linux-firmware-bcm43430"
--- a/conf/machine/include/sun4i.inc
+++ b/conf/machine/include/sun4i.inc
@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/arm/armv7a/tune-cortexa8.inc
+require conf/machine/include/tune-cortexa8.inc

 SOC_FAMILY = "sun4i"
--- a/conf/machine/include/sun50i-h6.inc
+++ b/conf/machine/include/sun50i-h6.inc
@ -1,8 +0,0 @@
-require conf/machine/include/sunxi64.inc
-
-DEFAULTTUNE ?= "cortexa53-crypto"
-require conf/machine/include/arm/armv8a/tune-cortexa53.inc
-
-MACHINEOVERRIDES =. "sun50i:"
-
-SOC_FAMILY = "sun50i-h6"
--- a/conf/machine/include/sun50i-h616.inc
+++ b/conf/machine/include/sun50i-h616.inc
@ -1,8 +0,0 @@
-require conf/machine/include/sunxi64.inc
-
-DEFAULTTUNE ?= "cortexa53-crypto"
-require conf/machine/include/arm/armv8a/tune-cortexa53.inc
-
-MACHINEOVERRIDES =. "sun50i:"
-
-SOC_FAMILY = "sun50i-h616"
--- a/conf/machine/include/sun50i.inc
+++ b/conf/machine/include/sun50i.inc
@ -1,6 +1,6 @@
 require conf/machine/include/sunxi64.inc

 DEFAULTTUNE ?= "cortexa53-crypto"
-require conf/machine/include/arm/armv8a/tune-cortexa53.inc
+require conf/machine/include/tune-cortexa53.inc

 SOC_FAMILY = "sun50i"
--- a/conf/machine/include/sun5i.inc
+++ b/conf/machine/include/sun5i.inc
@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/arm/armv7a/tune-cortexa8.inc
+require conf/machine/include/tune-cortexa8.inc

 SOC_FAMILY = "sun5i"
--- a/conf/machine/include/sun7i.inc
+++ b/conf/machine/include/sun7i.inc
@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/arm/armv7a/tune-cortexa7.inc
+require conf/machine/include/tune-cortexa7.inc

 SOC_FAMILY = "sun7i"
--- a/conf/machine/include/sun8i.inc
+++ b/conf/machine/include/sun8i.inc
@ -1,5 +1,5 @@
 require conf/machine/include/sunxi.inc
 require conf/machine/include/sunxi-mali.inc
-require conf/machine/include/arm/armv7a/tune-cortexa7.inc
+require conf/machine/include/tune-cortexa7.inc

 SOC_FAMILY = "sun8i"
--- a/conf/machine/include/sunxi-mali-driver.inc
+++ b/conf/machine/include/sunxi-mali-driver.inc
@ -4,7 +4,7 @@ PREFERRED_PROVIDER_virtual/libgles1 ?= "sunxi-mali"
 PREFERRED_PROVIDER_virtual/libgles2 ?= "sunxi-mali"
 PREFERRED_PROVIDER_virtual/egl ?= "sunxi-mali"

-PACKAGECONFIG:remove:pn-xserver-xorg = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'glamor', '', d)}"
+PACKAGECONFIG_remove_pn-xserver-xorg = "${@bb.utils.contains('DISTRO_FEATURES', 'x11', 'glamor', '', d)}"

 XSERVER += "sunxi-mali \
            sunxi-mali-dev"
--- a/conf/machine/include/sunxi.inc
+++ b/conf/machine/include/sunxi.inc
@ -9,18 +9,20 @@ MACHINE_SOCARCH_SUFFIX_sun4i = "-sun4i"

 PREFERRED_PROVIDER_virtual/xserver = "xserver-xorg"
 XSERVER = "xserver-xorg \
+           xf86-video-fbturbo \
           xf86-input-evdev \
           xf86-input-mouse \
           xf86-input-keyboard"

 PREFERRED_PROVIDER_virtual/kernel ?= "linux-mainline"
-PREFERRED_VERSION_linux-mainline ?= "6.1.%"
+PREFERRED_VERSION_linux-mainline ?= "5.4.%"
 PREFERRED_PROVIDER_u-boot ?= "u-boot"
 PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"

 KERNEL_IMAGETYPE ?= "uImage"

-IMAGE_FSTYPES += "ext3 tar.gz wic.gz wic.bmap"
+IMAGE_CLASSES += "sdcard_image-sunxi"
+IMAGE_FSTYPES += "ext3 tar.gz sunxi-sdimg wic.gz wic.bmap"

 MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"

@ -30,7 +32,7 @@ UBOOT_ENTRYPOINT ?= "0x40008000"

 SPL_BINARY ?= "u-boot-sunxi-with-spl.bin"

-SERIAL_CONSOLES ?= "115200;ttyS0"
+SERIAL_CONSOLE ?= "115200 ttyS0"
 MACHINE_FEATURES ?= "alsa apm keyboard rtc serial screen usbgadget usbhost vfat"

 # Mimic the sdcard_image-sunxi.bbclass
--- a/conf/machine/include/sunxi64.inc
+++ b/conf/machine/include/sunxi64.inc
@ -9,7 +9,8 @@ PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot"

 KERNEL_IMAGETYPE ?= "Image"

-IMAGE_FSTYPES += "ext4 tar.gz wic.gz wic.bmap"
+IMAGE_CLASSES += "sdcard_image-sunxi"
+IMAGE_FSTYPES += "ext4 tar.gz sunxi-sdimg"

 MACHINE_EXTRA_RRECOMMENDS = "kernel-modules"

@ -18,34 +19,8 @@ UBOOT_LOCALVERSION = "-g${@d.getVar('SRCPV', True).partition('+')[2][0:7]}"
 UBOOT_ENTRYPOINT ?= "0x40008000"
 UBOOT_LOADADDRESS ?= "0x400080OB00"

-#UBOOT_BINARY ?= "u-boot.itb"
-SPL_BINARY ?= "u-boot-sunxi-with-spl.bin"
+UBOOT_BINARY ?= "u-boot.itb"
+SPL_BINARY ?= "spl/sunxi-spl.bin"

-SERIAL_CONSOLES ?= "115200;ttyS0"
+SERIAL_CONSOLE ?= "115200 ttyS0"
 MACHINE_FEATURES ?= "alsa apm keyboard rtc serial screen usbgadget usbhost vfat"
-
-# arm64 dbts are under <vendor>/dts but is deployed under DEPLOYDIR 
-do_fix_device_tree_location() {
-
-    for kdt in ${KERNEL_DEVICETREE}
-    do
-        local dbt_dir=$(dirname ${kdt})
-        if [ "." != "${dbt_dir}" ] ; then
-            local dbt=$(basename ${kdt})
-            local dst=${DEPLOY_DIR_IMAGE}/${dbt_dir}/${dbt}
-            if [ ! -f ${dst} ] ; then
-                mkdir -p ${DEPLOY_DIR_IMAGE}/$dbt_dir
-                ln -s ${DEPLOY_DIR_IMAGE}/${dbt} ${dst}
-            fi
-        fi
-    done
-}
-
-
-addtask do_fix_device_tree_location after do_write_wks_template before do_image_wic
-
-SUNXI_BOOT_SPACE ?= "40"
-IMAGE_BOOT_FILES ?= "${KERNEL_IMAGETYPE} boot.scr ${KERNEL_DEVICETREE}"
-
-WKS_FILES ?= "sunxi-sdcard-image.wks.in"
-WKS_FILE_DEPENDS ?= "virtual/kernel u-boot"
--- a/conf/machine/nanopi-r1.conf
+++ b/conf/machine/nanopi-r1.conf
@ -1,8 +0,0 @@
-#@TYPE: Machine
-#@NAME: NanoPi R1
-#@DESCRIPTION: Machine configuration for the FriendlyARM NanoPi R1, based on #the Allwinner H3 CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h3-nanopi-r1.dtb"
-UBOOT_MACHINE = "nanopi_r1_defconfig"
--- a/conf/machine/orange-pi-one-plus.conf
+++ b/conf/machine/orange-pi-one-plus.conf
@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-one-plus
-#@DESCRIPTION: Machine configuration for the Orange Pi One Plus, based on Allwinner H6 CPU
-
-
-require conf/machine/include/sun50i-h6.inc
-
-KERNEL_DEVICETREE = "allwinner/sun50i-h6-orangepi-one-plus.dtb"
-UBOOT_MACHINE = "orangepi_one_plus_defconfig"
--- a/conf/machine/orange-pi-pc2.conf
+++ b/conf/machine/orange-pi-pc2.conf
@ -1,8 +0,0 @@
-#@TYPE: Machine
-#@NAME: orangepi-pc2
-#@DESCRIPTION: Machine configuration for the orangepi-pc2, based on Allwinner A64 CPU
-
-require conf/machine/include/sun50i.inc
-
-KERNEL_DEVICETREE = "allwinner/sun50i-h5-orangepi-pc2.dtb"
-UBOOT_MACHINE = "orangepi_pc2_defconfig"
--- a/conf/machine/orange-pi-r1.conf
+++ b/conf/machine/orange-pi-r1.conf
@ -1,9 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-r1
-#@DESCRIPTION: Machine configuration for the orange-pi-r1, base on allwinner H2+ CPU
-
-require conf/machine/include/sun8i.inc
-
-KERNEL_DEVICETREE = "sun8i-h2-plus-orangepi-r1.dtb"
-UBOOT_MACHINE = "orangepi_r1_defconfig"
-
--- a/conf/machine/orange-pi-zero.conf
+++ b/conf/machine/orange-pi-zero.conf
@ -1,6 +1,6 @@
 #@TYPE: Machine
-#@NAME: orange-pi-zero
-#@DESCRIPTION: Machine configuration for the orange-pi-zero, based on Allwinner H2 CPU
+#@NAME: orange-pi-one
+#@DESCRIPTION: Machine configuration for the orange-pi-one, base on allwinner H3 CPU

 require conf/machine/include/sun8i.inc

--- a/conf/machine/orange-pi-zero2.conf
+++ b/conf/machine/orange-pi-zero2.conf
@ -1,16 +0,0 @@
-#@TYPE: Machine
-#@NAME: orange-pi-zero-2
-#@DESCRIPTION: Machine configuration for the orange-pi-zero-2, based on Allwinner H616 CPU
-
-require conf/machine/include/sun50i-h616.inc
-
-KERNEL_DEVICETREE = "allwinner/sun50i-h616-orangepi-zero2.dtb"
-UBOOT_MACHINE = "orangepi_zero2_defconfig"
-
-SPL_BINARY = "u-boot-sunxi-with-spl.bin"
-
-# as for now neither graphics nor audio is supported
-MACHINE_FEATURES:remove = "alsa x11"
-MACHINE_FEATURES:append = "bluetooth wifi"
-
-MACHINE_EXTRA_RRECOMMENDS = "uwe5622-firmware"
--- a/recipes-bsp/atf/atf-sunxi_git.bb
+++ b/recipes-bsp/atf/atf-sunxi_git.bb
@ -0,0 +1,27 @@
+DESCRIPTION = "ARM Trusted Firmware Allwinner"
+LICENSE = "BSD"
+LIC_FILES_CHKSUM = "file://license.md;md5=829bdeb34c1d9044f393d5a16c068371"
+
+SRC_URI = "git://github.com/apritzel/arm-trusted-firmware;nobranch=1"
+SRCREV = "aa75c8da415158a94b82a430b2b40000778e851f"
+
+S = "${WORKDIR}/git"
+B = "${WORKDIR}/build"
+
+COMPATIBLE_MACHINE = "(sun50i)"
+
+PLATFORM_sun50i = "sun50iw1p1"
+
+LDFLAGS[unexport] = "1"
+
+do_compile() {
+    oe_runmake -C ${S} BUILD_BASE=${B} \
+      CROSS_COMPILE=${TARGET_PREFIX} \
+      PLAT=${PLATFORM} \
+      bl31 \
+      all
+}
+
+do_install() {
+    install -D -p -m 0644 ${B}/${PLATFORM}/release/bl31.bin ${DEPLOY_DIR_IMAGE}/bl31.bin
+}
--- a/recipes-bsp/sunxi-board-fex/sunxi-board-fex.bb
+++ b/recipes-bsp/sunxi-board-fex/sunxi-board-fex.bb
@ -9,9 +9,9 @@ PR = "r0"

 COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"

-SRC_URI = "git://github.com/linux-sunxi/sunxi-boards.git;protocol=https;branch=master"
+SRC_URI = "git://github.com/linux-sunxi/sunxi-boards.git;protocol=git"
 # Increase PV with SRCREV change
-SRCREV = "af5f938ea14a3614d35ad3d9ab51a5d392117444"
+SRCREV = "496ef0fbd166cc2395daa76dd3c359357420963d"

 S = "${WORKDIR}/git"

--- a/recipes-bsp/trusted-firmware-a/trusted-firmware-a_%.bbappend
+++ b/recipes-bsp/trusted-firmware-a/trusted-firmware-a_%.bbappend
@ -1,7 +0,0 @@
-COMPATIBLE_MACHINE = "(sun50i|sun50i-h616|sun50i-h6)"
-
-TFA_PLATFORM:sun50i = "sun50i_a64"
-TFA_PLATFORM:sun50i-h6 = "sun50i_h6"
-TFA_PLATFORM:sun50i-h616 = "sun50i_h616"
-
-TFA_BUILD_TARGET = "bl31"
--- a/recipes-bsp/u-boot/files/0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch
+++ b/recipes-bsp/u-boot/files/0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch
@ -1,21 +1,20 @@
-From 6a64d90ca4d976c16a2e102dbad0848e4d29776c Mon Sep 17 00:00:00 2001
+From b1e4b9672d7bdd4a6a4d08b1514b46af25996cc8 Mon Sep 17 00:00:00 2001
 From: Florin Sarbu <florin@resin.io>
 Date: Wed, 12 Sep 2018 14:22:49 +0200
 Subject: [PATCH] nanopi_neo_air_defconfig: Enable eMMC support

-Upstream-Status: Pending
+Upstream-status: Pending
 Signed-off-by: Florin Sarbu <florin@resin.io>
-
 ---
 configs/nanopi_neo_air_defconfig | 1 +
 1 file changed, 1 insertion(+)

 diff --git a/configs/nanopi_neo_air_defconfig b/configs/nanopi_neo_air_defconfig
-index 806d95c1cc..8899cc3a15 100644
+index baaccf145e..77fa1489e4 100644
 --- a/configs/nanopi_neo_air_defconfig
 +++ b/configs/nanopi_neo_air_defconfig
-@@ -9,3 +9,4 @@ CONFIG_DRAM_CLK=408
- CONFIG_CONSOLE_MUX=y
+@@ -9,3 +9,4 @@ CONFIG_CONSOLE_MUX=y
+ CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-neo-air"
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_OHCI_HCD=y
 +CONFIG_MMC_SUNXI_SLOT_EXTRA=2
--- a/recipes-bsp/u-boot/files/0002-Added-nanopi-r1-board-support.patch
+++ b/recipes-bsp/u-boot/files/0002-Added-nanopi-r1-board-support.patch
@ -1,42 +0,0 @@
-From 767a05572ef5b93c2e157749b1754cbe261ee43d Mon Sep 17 00:00:00 2001
-From: Marek Belisko <marek.belisko@open-nandra.com>
-Date: Fri, 8 Apr 2022 11:33:53 +0200
-Subject: [PATCH] Added nanopi-r1 board support
-
-Patch taken from : https://github.com/armbian/build/blob/master/patch/u-boot/u-boot-sunxi/add-nanopi-r1-and-duo2.patch
-
-Upstream-Status: Pending
-
-Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
---
-diff --git a/configs/nanopi_r1_defconfig b/configs/nanopi_r1_defconfig
-new file mode 100644
-index 0000000..e028b41
--- /dev/null
-+++ b/configs/nanopi_r1_defconfig
-@@ -0,0 +1,22 @@
-+CONFIG_ARM=y
-+CONFIG_ARCH_SUNXI=y
-+CONFIG_SPL=y
-+CONFIG_MACH_SUN8I_H3=y
-+CONFIG_DRAM_CLK=408
-+CONFIG_DRAM_ZQ=3881979
-+CONFIG_DRAM_ODT_EN=y
-+CONFIG_MACPWR="PD6"
-+# CONFIG_VIDEO_DE2 is not set
-+CONFIG_NR_DRAM_BANKS=1
-+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-+CONFIG_CONSOLE_MUX=y
-+CONFIG_SYS_CLK_FREQ=480000000
-+# CONFIG_CMD_FLASH is not set
-+# CONFIG_SPL_DOS_PARTITION is not set
-+# CONFIG_SPL_EFI_PARTITION is not set
-+CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-r1"
-+CONFIG_SUN8I_EMAC=y
-+CONFIG_USB_EHCI_HCD=y
-+CONFIG_USB_OHCI_HCD=y
-+CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
-- 
-2.7.4
-
--- a/recipes-bsp/u-boot/files/bananapi-m64/boot.cmd
+++ b/recipes-bsp/u-boot/files/bananapi-m64/boot.cmd
@ -1,11 +0,0 @@
-# Default to (primary) SD
-rootdev=mmcblk0p2
-if itest.b *0x28 == 0x02 ; then
-	# U-Boot loaded from eMMC or secondary SD so use it for rootfs too
-	echo "U-boot loaded from eMMC or secondary SD"
-	rootdev=mmcblk2p2
-fi
-setenv bootargs console=${console} console=tty1 root=/dev/${rootdev} rootwait panic=10 ${extra}
-load mmc 0:1 ${fdt_addr_r} ${fdtfile}
-load mmc 0:1 ${kernel_addr_r} Image
-booti ${kernel_addr_r} - ${fdt_addr_r}
--- a/recipes-bsp/u-boot/u-boot-sunxi.bb
+++ b/recipes-bsp/u-boot/u-boot-sunxi.bb
@ -2,7 +2,7 @@ DESCRIPTION = "U-Boot port for sunxi"

 require recipes-bsp/u-boot/u-boot.inc

-LICENSE = "GPL-2.0-only"
+LICENSE = "GPLv2"
 LIC_FILES_CHKSUM = "file://Licenses/gpl-2.0.txt;md5=b234ee4d69f5fce4486a80fdaf4a4263"

 # No patches for other machines yet
@ -19,7 +19,7 @@ UBOOT_MACHINE_olinuxino-a10s = "A10s-OLinuXino-Micro_config"
 UBOOT_MACHINE_meleg = "Mele_A1000G_config"

 SRC_URI = " \
-	git://github.com/linux-sunxi/u-boot-sunxi.git;protocol=https;branch=sunxi \
+	git://github.com/linux-sunxi/u-boot-sunxi.git;protocol=git;branch=sunxi \
 	file://0001-gcc5-fixes.patch \
 	file://0002-gcc6-fixes.patch \
 	file://0003-No-gcc-version-specific-includes.patch \
--- a/recipes-bsp/u-boot/u-boot_%.bbappend
+++ b/recipes-bsp/u-boot/u-boot_%.bbappend
@ -1,30 +1,29 @@
-FILESEXTRAPATHS:prepend:sunxi := "${THISDIR}/files:"
+FILESEXTRAPATHS_prepend_sunxi := "${THISDIR}/files:"

-DEPENDS:append:sunxi = " bc-native dtc-native swig-native python3-native flex-native bison-native "
-DEPENDS:append:sun50i = " trusted-firmware-a"
+DEPENDS_append_sunxi = " bc-native dtc-native swig-native python3-native flex-native bison-native "
+DEPENDS_append_sun50i = " atf-sunxi "

-COMPATIBLE_MACHINE:sunxi = "(sun4i|sun5i|sun7i|sun8i|sun50i)"
+COMPATIBLE_MACHINE_sunxi = "(sun4i|sun5i|sun7i|sun8i|sun50i)"

-DEFAULT_PREFERENCE:sun4i = "1"
-DEFAULT_PREFERENCE:sun5i = "1"
-DEFAULT_PREFERENCE:sun7i = "1"
-DEFAULT_PREFERENCE:sun8i = "1"
-DEFAULT_PREFERENCE:sun50i = "1"
+DEFAULT_PREFERENCE_sun4i="1"
+DEFAULT_PREFERENCE_sun5i="1"
+DEFAULT_PREFERENCE_sun7i="1"
+DEFAULT_PREFERENCE_sun8i="1"
+DEFAULT_PREFERENCE_sun50i="1"

-SRC_URI:append:sunxi = " \
-        file://0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch \
-	file://0002-Added-nanopi-r1-board-support.patch \
-        file://boot.cmd \
-"
+SRC_URI_append_sunxi = " \
+           file://0001-nanopi_neo_air_defconfig-Enable-eMMC-support.patch \
+           file://boot.cmd \
+           "

-UBOOT_ENV_SUFFIX:sunxi = "scr"
-UBOOT_ENV:sunxi = "boot"
+UBOOT_ENV_SUFFIX_sunxi = "scr"
+UBOOT_ENV_sunxi = "boot"

-EXTRA_OEMAKE:append:sunxi = ' HOSTLDSHARED="${BUILD_CC} -shared ${BUILD_LDFLAGS} ${BUILD_CFLAGS}" '
-EXTRA_OEMAKE:append:sun50i = " BL31=${DEPLOY_DIR_IMAGE}/bl31.bin SCP=/dev/null"
+EXTRA_OEMAKE_append_sunxi = ' HOSTLDSHARED="${BUILD_CC} -shared ${BUILD_LDFLAGS} ${BUILD_CFLAGS}" '
+EXTRA_OEMAKE_append_sun50i = " BL31=${DEPLOY_DIR_IMAGE}/bl31.bin "

-do_compile:sun50i[depends] += "trusted-firmware-a:do_deploy"
+do_compile_sun50i[depends] += "atf-sunxi:do_deploy"

-do_compile:append:sunxi() {
+do_compile_append_sunxi() {
    ${B}/tools/mkimage -C none -A arm -T script -d ${WORKDIR}/boot.cmd ${WORKDIR}/${UBOOT_ENV_BINARY}
 }
--- a/recipes-devtools/python/pya20_0.2.12.bb
+++ b/recipes-devtools/python/pya20_0.2.12.bb
@ -1,7 +1,7 @@
 DESCRIPTION = "A module to control Allwinner GPIO,SPI and I2C channels"
 HOMEPAGE = "https://pypi.python.org/pypi/pyA20"
 SECTION = "devel/python"
-LICENSE = "GPL-3.0-only"
+LICENSE = "GPLv3"
 LIC_FILES_CHKSUM = "file://PKG-INFO;md5=4e584373bb0f46ef1e423cb7df37847d"
 DEPENDS = "python3"

@ -15,7 +15,7 @@ S = "${WORKDIR}/pyA20-${PV}"

 inherit distutils3

-do_compile:prepend() { 
+do_compile_prepend() { 
 cp ${WORKDIR}/mapping.h ${S}/pyA20/gpio/mapping.h
 }

--- a/recipes-graphics/libgles/sunxi-mali_git.bb
+++ b/recipes-graphics/libgles/sunxi-mali_git.bb
@ -21,8 +21,8 @@ python __anonymous() {
        raise bb.parse.SkipPackage("%s-%s ONLY supports hardfp mode for now" % (pkgn, pkgv))
 }

-SRCREV = "d343311efc8db166d8371b28494f0f27b6a58724"
-SRC_URI = "git://github.com/linux-sunxi/sunxi-mali.git;protocol=https;branch=master \
+SRCREV_pn-${PN} = "d343311efc8db166d8371b28494f0f27b6a58724"
+SRC_URI = "gitsm://github.com/linux-sunxi/sunxi-mali.git \
           file://0001-Add-EGLSyncKHR-EGLTimeKHR-and-GLChar-definition.patch \
           file://0002-Add-missing-GLchar-definition.patch \
           file://0003-Fix-sed-to-replace-by-the-correct-var.patch \
@ -92,13 +92,13 @@ do_install() {
 # Packages like xf86-video-fbturbo dlopen() libUMP.so, so we do need to ship the .so files in ${PN}
 PACKAGES =+ "${PN}-test"

-RPROVIDES:${PN} += "libGLESv2.so libEGL.so libGLESv2.so libGLESv1_CM.so libMali.so"
-RDEPENDS:${PN}-test = "${PN}"
+RPROVIDES_${PN} += "libGLESv2.so libEGL.so libGLESv2.so libGLESv1_CM.so libMali.so"
+RDEPENDS_${PN}-test = "${PN}"

-FILES:${PN} += "${libdir}/lib*.so"
-FILES:${PN}-dev = "${includedir} ${libdir}/pkgconfig/*"
-FILES:${PN}-test = "${bindir}/sunximali-test"
+FILES_${PN} += "${libdir}/lib*.so"
+FILES_${PN}-dev = "${includedir} ${libdir}/pkgconfig/*"
+FILES_${PN}-test = "${bindir}/sunximali-test"

 # These are closed binaries generated elsewhere so don't check ldflags & text relocations
-INSANE_SKIP:${PN} = "dev-so ldflags textrel"
-INSANE_SKIP:${PN}-test = "dev-so ldflags textrel"
+INSANE_SKIP_${PN} = "dev-so ldflags textrel"
+INSANE_SKIP_${PN}-test = "dev-so ldflags textrel"
--- a/recipes-graphics/libump/libump_git.bb
+++ b/recipes-graphics/libump/libump_git.bb
@ -1,14 +1,14 @@
 DESCRIPTION = "Unified Memory Provider userspace API source code needed for xf86-video-mali compilation"

-LICENSE = "Apache-2.0"
+LICENSE = "Apache-2"
 LIC_FILES_CHKSUM = "file://debian/copyright;md5=edf7fb6071cae7ec80d537a05ee17198"

 inherit autotools

 PV = "r4p0-00rel0+git${SRCPV}"
-SRCREV = "ec0680628744f30b8fac35e41a7bd8e23e59c39f"
+SRCREV_pn-${PN} = "ec0680628744f30b8fac35e41a7bd8e23e59c39f"

-SRC_URI = "git://github.com/linux-sunxi/libump.git;protocol=https;branch=master"
+SRC_URI = "git://github.com/linux-sunxi/libump.git"

 S = "${WORKDIR}/git"

--- a/recipes-graphics/mesa/mesa-gl_%.bbappend
+++ b/recipes-graphics/mesa/mesa-gl_%.bbappend
@ -1 +0,0 @@
-PACKAGECONFIG:class-target = "opengl x11 gallium"
--- a/recipes-graphics/mesa/mesa_%.bbappend
+++ b/recipes-graphics/mesa/mesa_%.bbappend
@ -1,5 +1,5 @@
 # Enable lima and panfrost Mesa drivers
-PACKAGECONFIG:append:use-mailine-graphics = " lima panfrost"
+PACKAGECONFIG_append_use-mailine-graphics = " lima panfrost"
 # Enable KMS renderonly Mesa support
 # See https://cgit.freedesktop.org/mesa/mesa/commit/?id=2b780fe89300199f2334539aa1678e9b68f0434f
-GALLIUMDRIVERS:append:use-mailine-graphics = ",kmsro"
+GALLIUMDRIVERS_append_use-mailine-graphics = ",kmsro"
--- a/recipes-graphics/tslib/tslib_1.1.bbappend.disabled
+++ b/recipes-graphics/tslib/tslib_1.1.bbappend.disabled
@ -1,4 +1,4 @@
-FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"

 SRC_URI += "file://tslib.patch"

--- a/recipes-graphics/xorg-xserver/libdri2_git.bb
+++ b/recipes-graphics/xorg-xserver/libdri2_git.bb
@ -1,6 +1,6 @@
 DESCRIPTION = "Library for the DRI2 extension to the X Window System"

-LICENSE = "MIT-CMU"
+LICENSE = "MIT-X"
 LIC_FILES_CHKSUM = "file://COPYING;md5=827da9afab1f727f2a66574629e0f39c"

 DEPENDS = "libdrm libxext libxfixes xorgproto"
@ -9,7 +9,7 @@ PE = "1"
 PV = "1.0.0+git${SRCPV}"
 SRC_URI = "git://github.com/robclark/libdri2.git;protocol=http;branch=master"

-SRCREV = "4f1eef3183df2b270c3d5cbef07343ee5127a6a4"
+SRCREV_pn-${PN} = "4f1eef3183df2b270c3d5cbef07343ee5127a6a4"

 S = "${WORKDIR}/git"

--- a/recipes-graphics/xorg-xserver/xf86-video-fbturbo_git.bb
+++ b/recipes-graphics/xorg-xserver/xf86-video-fbturbo_git.bb
@ -2,14 +2,14 @@ require recipes-graphics/xorg-driver/xorg-driver-video.inc

 DESCRIPTION = "X.Org X server -- A10/A13 display driver"

-LICENSE = "MIT-CMU"
+LICENSE = "MIT-X"
 LIC_FILES_CHKSUM = "file://COPYING;md5=f91dc3ee5ce59eb4b528e67e98a31266"

 DEPENDS += "sunxi-mali libump xorgproto"

 PE = "3"
 PV = "0.5.1+git${SRCPV}"
-SRCREV = "e094e3c8f9004ca3347694bd05b99d136e8621b9"
+SRCREV_pn-${PN} = "e094e3c8f9004ca3347694bd05b99d136e8621b9"

 SRC_URI = "git://github.com/ssvb/xf86-video-fbturbo.git;protocol=http;branch=master \
           file://20-fbturbo.conf"
@ -18,9 +18,9 @@ S = "${WORKDIR}/git"

 CFLAGS += " -I${STAGING_INCDIR}/xorg "

-do_install:append() {
+do_install_append() {
    install -d ${D}${datadir}/X11/xorg.conf.d
    install -m 0644 ${WORKDIR}/20-fbturbo.conf ${D}${datadir}/X11/xorg.conf.d
 }

-FILES:${PN} += "${datadir}/X11/xorg.conf.d/20-fbturbo.conf"
+FILES_${PN} += "${datadir}/X11/xorg.conf.d/20-fbturbo.conf"
--- a/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
+++ b/recipes-graphics/xorg-xserver/xserver-xf86-config_0.1.bbappend
@ -1 +1 @@
-FILESEXTRAPATHS:prepend := "${THISDIR}/${PN}:"
+FILESEXTRAPATHS_prepend := "${THISDIR}/${PN}:"
--- a/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend
+++ b/recipes-graphics/xorg-xserver/xserver-xorg_%.bbappend
@ -1 +0,0 @@
-DEPENDS += "libxshmfence"
--- a/recipes-kernel/linux-firmware/linux-firmware_%.bbappend
+++ b/recipes-kernel/linux-firmware/linux-firmware_%.bbappend
@ -6,7 +6,7 @@
 # WARNING: The following commit is required for NVRAM files to be included in
 # linux-firmware-bcm43430 package:
 # http://git.openembedded.org/openembedded-core/commit/?id=dde0f79f32fa6bab045ef60199903f74c4cc3393
-do_install:append() {
+do_install_append() {
 	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2.txt
 	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.xunlong,orangepi-zero-plus2-h3.txt
 	ln -sf -r ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.AP6212.txt ${D}${nonarch_base_libdir}/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt
--- a/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0001-drv-wireless-add-uwe5622-wifi-driver.patch
+++ b/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0001-drv-wireless-add-uwe5622-wifi-driver.patch
--- a/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0002-drv-wireless-driver-for-uwe5622-allwinner-bugfix.patch
+++ b/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0002-drv-wireless-driver-for-uwe5622-allwinner-bugfix.patch
--- a/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0003-drv-fix-incldue-path-for-unisocwcn.patch
+++ b/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0003-drv-fix-incldue-path-for-unisocwcn.patch
@ -1,45 +0,0 @@
-From 5138d597275fd503573fac84018186bd18740644 Mon Sep 17 00:00:00 2001
-From: pbiel <pbiel7@gmail.com>
-Date: Thu, 30 Mar 2023 22:45:33 +0200
-Subject: [PATCH] Fix incldue path for unisocwcn
-
---
- drivers/net/wireless/uwe5622/Makefile           | 4 +++-
- drivers/net/wireless/uwe5622/unisocwcn/Makefile | 6 +++---
- 2 files changed, 6 insertions(+), 4 deletions(-)
-
-diff --git a/drivers/net/wireless/uwe5622/Makefile b/drivers/net/wireless/uwe5622/Makefile
-index 313ea5123..e9a398584 100644
--- a/drivers/net/wireless/uwe5622/Makefile
-+++ b/drivers/net/wireless/uwe5622/Makefile
-@@ -2,7 +2,9 @@ obj-$(CONFIG_AW_WIFI_DEVICE_UWE5622) += unisocwcn/
- obj-$(CONFIG_WLAN_UWE5622)    += unisocwifi/
- obj-$(CONFIG_TTY_OVERY_SDIO)  += tty-sdio/
- 
-UNISOCWCN_DIR := $(shell cd $(src)/unisocwcn/ && /bin/pwd)
-+mkfile_path := $(abspath $(lastword $(MAKEFILE_LIST)))
-+UNISOCWCN_DIR := $(dir $(mkfile_path))/unisocwcn/
-+
- UNISOC_BSP_INCLUDE := $(UNISOCWCN_DIR)/include
- export UNISOC_BSP_INCLUDE
- 
-diff --git a/drivers/net/wireless/uwe5622/unisocwcn/Makefile b/drivers/net/wireless/uwe5622/unisocwcn/Makefile
-index f9c595747..1ad490594 100644
--- a/drivers/net/wireless/uwe5622/unisocwcn/Makefile
-+++ b/drivers/net/wireless/uwe5622/unisocwcn/Makefile
-@@ -129,9 +129,9 @@ ccflags-y += -DCONFIG_WCN_BOOT
- ccflags-y += -DCONFIG_WCN_UTILS
- 
- #### include path ######
-ccflags-y += -I$(src)/include/
-ccflags-y += -I$(src)/platform/
-ccflags-y += -I$(src)/platform/rf/
-+ccflags-y += -I$(srctree)/$(src)/include/
-+ccflags-y += -I$(srctree)/$(src)/platform/
-+ccflags-y += -I$(srctree)/$(src)/platform/rf/
- 
- #### add cflag for Customer ######
- ### ---------- Hisilicon start ---------- ###
-- 
-2.34.1
-
--- a/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0004-drv-wireless-adapt-uwe5622-wifi-driver-to-kernel-6.1.patch
+++ b/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0004-drv-wireless-adapt-uwe5622-wifi-driver-to-kernel-6.1.patch
@ -1,177 +0,0 @@
-From 5f4d2d5fc32dfe41c73cac36ec6747c34e5562a3 Mon Sep 17 00:00:00 2001
-From: pbiel <pbiel7@gmail.com>
-Date: Wed, 15 Mar 2023 23:04:27 +0100
-Subject: [PATCH] wireless: Adapt uwe5622 wifi driver to kernel 6.1
-
---
- drivers/net/wireless/uwe5622/tty-sdio/lpm.c            |  2 +-
- .../uwe5622/unisocwcn/boot/wcn_integrate_dev.c         |  2 +-
- .../uwe5622/unisocwcn/platform/wcn_parn_parser.c       |  2 +-
- .../wireless/uwe5622/unisocwcn/platform/wcn_procfs.c   |  2 +-
- .../wireless/uwe5622/unisocwcn/usb/wcn_usb_download.c  |  2 +-
- .../net/wireless/uwe5622/unisocwcn/usb/wcn_usb_test.c  |  6 +++---
- drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c     | 10 +++++-----
- drivers/net/wireless/uwe5622/unisocwifi/cmdevt.c       |  2 +-
- 8 files changed, 14 insertions(+), 14 deletions(-)
-
-diff --git a/drivers/net/wireless/uwe5622/tty-sdio/lpm.c b/drivers/net/wireless/uwe5622/tty-sdio/lpm.c
-index b2d9a8994e5e..35e30651a921 100644
--- a/drivers/net/wireless/uwe5622/tty-sdio/lpm.c
-+++ b/drivers/net/wireless/uwe5622/tty-sdio/lpm.c
-@@ -70,7 +70,7 @@ static int btwrite_proc_show(struct seq_file *m, void *v)
- 
- static int bluesleep_open_proc_btwrite(struct inode *inode, struct file *file)
- {
-	return single_open(file, btwrite_proc_show, PDE_DATA(inode));
-+	return single_open(file, btwrite_proc_show, pde_data(inode));
- }
- 
- static const struct proc_ops lpm_proc_btwrite_fops = {
-diff --git a/drivers/net/wireless/uwe5622/unisocwcn/boot/wcn_integrate_dev.c b/drivers/net/wireless/uwe5622/unisocwcn/boot/wcn_integrate_dev.c
-index 3ee6910e7cf7..29a3ec298bc1 100644
--- a/drivers/net/wireless/uwe5622/unisocwcn/boot/wcn_integrate_dev.c
-+++ b/drivers/net/wireless/uwe5622/unisocwcn/boot/wcn_integrate_dev.c
-@@ -562,7 +562,7 @@ static struct wcn_proc_data g_proc_data = {
- static int wcn_platform_open(struct inode *inode, struct file *filp)
- {
- 	struct platform_proc_file_entry
-	*entry = (struct platform_proc_file_entry *)PDE_DATA(inode);
-+	*entry = (struct platform_proc_file_entry *)pde_data(inode);
- 
- 	WCN_INFO("entry name:%s\n!", entry->name);
- 
-diff --git a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c
-index aea7d6d0fe57..bd841f0b32d3 100644
--- a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c
-+++ b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_parn_parser.c
-@@ -146,7 +146,7 @@ static int prefixcmp(const char *str, const char *prefix)
- }
- 
- #if KERNEL_VERSION(3, 19, 0) <= LINUX_VERSION_CODE
-static int find_callback(struct dir_context *ctx, const char *name, int namlen,
-+static bool find_callback(struct dir_context *ctx, const char *name, int namlen,
- 		     loff_t offset, u64 ino, unsigned int d_type)
- #else
- static int find_callback(void *ctx, const char *name, int namlen,
-diff --git a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_procfs.c b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_procfs.c
-index 2edb7903d80e..9e453365bba8 100644
--- a/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_procfs.c
-+++ b/drivers/net/wireless/uwe5622/unisocwcn/platform/wcn_procfs.c
-@@ -431,7 +431,7 @@ static const struct proc_ops mdbg_snap_shoot_seq_fops = {
- static int mdbg_proc_open(struct inode *inode, struct file *filp)
- {
- 	struct mdbg_proc_entry *entry =
-		(struct mdbg_proc_entry *)PDE_DATA(inode);
-+		(struct mdbg_proc_entry *)pde_data(inode);
- 	filp->private_data = entry;
- 
- 	return 0;
-diff --git a/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_download.c b/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_download.c
-index 8f228d403909..750bfc0466cb 100644
--- a/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_download.c
-+++ b/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_download.c
-@@ -82,7 +82,7 @@ static int wcn_usb_dopen(struct inode *inode, struct file *file)
- {
- 	struct wcn_usb_ddata *data;
- 
-	data = (struct wcn_usb_ddata *)PDE_DATA(inode);
-+	data = (struct wcn_usb_ddata *)pde_data(inode);
- 
- 	if (!data)
- 		return -EIO;
-diff --git a/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_test.c b/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_test.c
-index c2cccc658c0d..e7a9f258943e 100644
--- a/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_test.c
-+++ b/drivers/net/wireless/uwe5622/unisocwcn/usb/wcn_usb_test.c
-@@ -61,7 +61,7 @@ static int wcn_usb_channel_open(struct inode *inode, struct file *file)
- {
- 	struct channel *channel;
- 
-	channel = (struct channel *)PDE_DATA(inode);
-+	channel = (struct channel *)pde_data(inode);
- 
- 	if (!channel)
- 		return -EIO;
-@@ -467,7 +467,7 @@ static int wcn_usb_chnmg_open(struct inode *inode, struct file *file)
- {
- 	struct chnmg *chnmg;
- 	/* get channel_list head */
-	chnmg = (struct chnmg *)PDE_DATA(inode);
-+	chnmg = (struct chnmg *)pde_data(inode);
- 
- 	file->private_data = chnmg;
- 	return 0;
-@@ -916,7 +916,7 @@ static int print_level_open(struct inode *inode, struct file *file)
- {
- 	struct chnmg *chnmg;
- 	/* get channel_list head */
-	chnmg = (struct chnmg *)PDE_DATA(inode);
-+	chnmg = (struct chnmg *)pde_data(inode);
- 
- 	file->private_data = chnmg;
- 	return 0;
-diff --git a/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c b/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c
-index daef880ae3c0..2231388da70a 100644
--- a/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c
-+++ b/drivers/net/wireless/uwe5622/unisocwifi/cfg80211.c
-@@ -703,7 +703,7 @@ static int sprdwl_add_cipher_key(struct sprdwl_vif *vif, bool pairwise,
- }
- 
- static int sprdwl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
-				   u8 key_index, bool pairwise,
-+				   int link_id, u8 key_index, bool pairwise,
- 				   const u8 *mac_addr,
- 				   struct key_params *params)
- {
-@@ -725,7 +725,7 @@ static int sprdwl_cfg80211_add_key(struct wiphy *wiphy, struct net_device *ndev,
- }
- 
- static int sprdwl_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
-				   u8 key_index, bool pairwise,
-+				   int link_id, u8 key_index, bool pairwise,
- 				   const u8 *mac_addr)
- {
- 	struct sprdwl_vif *vif = netdev_priv(ndev);
-@@ -755,7 +755,7 @@ static int sprdwl_cfg80211_del_key(struct wiphy *wiphy, struct net_device *ndev,
- 
- static int sprdwl_cfg80211_set_default_key(struct wiphy *wiphy,
- 					   struct net_device *ndev,
-					   u8 key_index, bool unicast,
-+					   int link_id, u8 key_index, bool unicast,
- 					   bool multicast)
- {
- 	struct sprdwl_vif *vif = netdev_priv(ndev);
-@@ -984,7 +984,7 @@ static int sprdwl_cfg80211_change_beacon(struct wiphy *wiphy,
- 	return sprdwl_change_beacon(vif, beacon);
- }
- 
-static int sprdwl_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev)
-+static int sprdwl_cfg80211_stop_ap(struct wiphy *wiphy, struct net_device *ndev, unsigned int link_id)
- {
- #ifdef DFS_MASTER
- 	struct sprdwl_vif *vif = netdev_priv(ndev);
-@@ -2367,7 +2367,7 @@ void sprdwl_report_connection(struct sprdwl_vif *vif,
- 		 conn_info->status == SPRDWL_ROAM_SUCCESS){
- #if LINUX_VERSION_CODE >= KERNEL_VERSION(4, 14, 0)
- 		struct cfg80211_roam_info roam_info = {
-			.bss = bss,
-+			.links[0].bss = bss,
- 			.req_ie = conn_info->req_ie,
- 			.req_ie_len = conn_info->req_ie_len,
- 			.resp_ie = conn_info->resp_ie,
-diff --git a/drivers/net/wireless/uwe5622/unisocwifi/cmdevt.c b/drivers/net/wireless/uwe5622/unisocwifi/cmdevt.c
-index e81619b12e39..1ecbfac5b490 100644
--- a/drivers/net/wireless/uwe5622/unisocwifi/cmdevt.c
-+++ b/drivers/net/wireless/uwe5622/unisocwifi/cmdevt.c
-@@ -3296,7 +3296,7 @@ void sprdwl_event_chan_changed(struct sprdwl_vif *vif, u8 *data, u16 len)
- 						NL80211_CHAN_HT20);
- 		else
- 			wl_err("%s, ch is null!\n", __func__);
-		cfg80211_ch_switch_notify(vif->ndev, &chandef);
-+		cfg80211_ch_switch_notify(vif->ndev, &chandef, 0);
- 	}
- }
- 
-- 
-2.34.1
-
--- a/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0005-drv-fix-setting-mac-address-for-netdev-in-uwe5622.patch
+++ b/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0005-drv-fix-setting-mac-address-for-netdev-in-uwe5622.patch
@ -1,35 +0,0 @@
-From 9211a92d07e9a43fce104f87f9d45e890257b699 Mon Sep 17 00:00:00 2001
-From: pbiel <pbiel7@gmail.com>
-Date: Tue, 7 Mar 2023 20:28:44 +0100
-Subject: [PATCH] wireless: fix setting mac address for netdev in uwe5622
- unisocwifi driver
-
---
- drivers/net/wireless/uwe5622/unisocwifi/main.c | 4 +++-
- 1 file changed, 3 insertions(+), 1 deletion(-)
-
-diff --git a/drivers/net/wireless/uwe5622/unisocwifi/main.c b/drivers/net/wireless/uwe5622/unisocwifi/main.c
-index 21efdf4e0..566a9a7f3 100644
--- a/drivers/net/wireless/uwe5622/unisocwifi/main.c
-+++ b/drivers/net/wireless/uwe5622/unisocwifi/main.c
-@@ -1356,6 +1356,7 @@ static struct sprdwl_vif *sprdwl_register_netdev(struct sprdwl_priv *priv,
- 	struct wireless_dev *wdev;
- 	struct sprdwl_vif *vif;
- 	int ret;
-+	u8 target_mac_addr[ETH_ALEN] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
- 
- #if (LINUX_VERSION_CODE >= KERNEL_VERSION(3, 17, 0))
- 	ndev = alloc_netdev(sizeof(*vif), name, NET_NAME_UNKNOWN, ether_setup);
-@@ -1411,7 +1412,8 @@ static struct sprdwl_vif *sprdwl_register_netdev(struct sprdwl_priv *priv,
- 	ndev->features |= NETIF_F_SG;
- 	SET_NETDEV_DEV(ndev, wiphy_dev(priv->wiphy));
- 
-	sprdwl_set_mac_addr(vif, addr, ndev->dev_addr);
-+	sprdwl_set_mac_addr(vif, addr, target_mac_addr);
-+	dev_addr_set(ndev, target_mac_addr);
- 
- #ifdef CONFIG_P2P_INTF
- 	if (type == NL80211_IFTYPE_P2P_DEVICE)
-- 
-2.34.1
-
--- a/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0006-drv-add-dump_reg-and-sunxi-sysinfo-drivers.patch
+++ b/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0006-drv-add-dump_reg-and-sunxi-sysinfo-drivers.patch
--- a/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0007-drv-add-sunxi_get_soc_chipid-and-sunxi_get_serial.patch
+++ b/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0007-drv-add-sunxi_get_soc_chipid-and-sunxi_get_serial.patch
@ -1,60 +0,0 @@
-From 452a691a83df1aab77cec33203cb04a817817a05 Mon Sep 17 00:00:00 2001
-From: The-going <48602507+The-going@users.noreply.github.com>
-Date: Thu, 5 May 2022 22:55:13 +0300
-Subject: [PATCH] drv: nvmem: sunxi_sid: Add sunxi_get_soc_chipid,
- sunxi_get_serial
-
---
- drivers/nvmem/sunxi_sid.c | 28 ++++++++++++++++++++++++++++
- 1 file changed, 28 insertions(+)
-
-diff --git a/drivers/nvmem/sunxi_sid.c b/drivers/nvmem/sunxi_sid.c
-index 37a6abb0e..c81fac63d 100644
--- a/drivers/nvmem/sunxi_sid.c
-+++ b/drivers/nvmem/sunxi_sid.c
-@@ -37,6 +37,25 @@ struct sunxi_sid {
- 	u32			value_offset;
- };
- 
-+static unsigned int sunxi_soc_chipid[4];
-+static unsigned int sunxi_serial[4];
-+
-+int sunxi_get_soc_chipid(unsigned char *chipid)
-+{
-+	memcpy(chipid, sunxi_soc_chipid, 16);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(sunxi_get_soc_chipid);
-+
-+int sunxi_get_serial(unsigned       char *serial)
-+{
-+	memcpy(serial, sunxi_serial, 16);
-+
-+	return 0;
-+}
-+EXPORT_SYMBOL(sunxi_get_serial);
-+
- static int sunxi_sid_read(void *context, unsigned int offset,
- 			  void *val, size_t bytes)
- {
-@@ -167,6 +186,15 @@ static int sunxi_sid_probe(struct platform_device *pdev)
- 
- 	platform_set_drvdata(pdev, nvmem);
- 
-+	nvmem_cfg->reg_read(sid, 0, &sunxi_soc_chipid[0], sizeof(int));
-+	nvmem_cfg->reg_read(sid, 4, &sunxi_soc_chipid[1], sizeof(int));
-+	nvmem_cfg->reg_read(sid, 8, &sunxi_soc_chipid[2], sizeof(int));
-+	nvmem_cfg->reg_read(sid, 12, &sunxi_soc_chipid[3], sizeof(int));
-+
-+	sunxi_serial[0] = sunxi_soc_chipid[3];
-+	sunxi_serial[1] = sunxi_soc_chipid[2];
-+	sunxi_serial[2] = (sunxi_soc_chipid[1] >> 16) & 0x0ffff;
-+
- 	return 0;
- }
- 
-- 
-2.35.3
-
-
--- a/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0008-drv-add-sunxi-addr-driver.patch
+++ b/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0008-drv-add-sunxi-addr-driver.patch
@ -1,612 +0,0 @@
-From 418436514e2e64e07e7fd2ef9d77ec4712d1033b Mon Sep 17 00:00:00 2001
-From: pbiel <pbiel7@gmail.com>
-Date: Fri, 24 Feb 2023 10:38:03 +0100
-Subject: [PATCH 2/2] Add sunxi addr driver
-
---
- drivers/misc/Kconfig                 |   1 +
- drivers/misc/Makefile                |   1 +
- drivers/misc/sunxi-addr/Kconfig      |   6 +
- drivers/misc/sunxi-addr/Makefile     |   5 +
- drivers/misc/sunxi-addr/sha256.c     | 178 +++++++++++++
- drivers/misc/sunxi-addr/sunxi-addr.c | 358 +++++++++++++++++++++++++++
- 6 files changed, 549 insertions(+)
- create mode 100644 drivers/misc/sunxi-addr/Kconfig
- create mode 100644 drivers/misc/sunxi-addr/Makefile
- create mode 100644 drivers/misc/sunxi-addr/sha256.c
- create mode 100644 drivers/misc/sunxi-addr/sunxi-addr.c
-
-diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
-index 358ad56f6..c59480dc8 100644
--- a/drivers/misc/Kconfig
-+++ b/drivers/misc/Kconfig
-@@ -514,4 +514,5 @@ source "drivers/misc/habanalabs/Kconfig"
- source "drivers/misc/uacce/Kconfig"
- source "drivers/misc/pvpanic/Kconfig"
- source "drivers/misc/mchp_pci1xxxx/Kconfig"
-+source "drivers/misc/sunxi-addr/Kconfig"
- endmenu
-diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
-index ac9b3e757..487a2bf2d 100644
--- a/drivers/misc/Makefile
-+++ b/drivers/misc/Makefile
-@@ -62,3 +62,4 @@ obj-$(CONFIG_HI6421V600_IRQ)	+= hi6421v600-irq.o
- obj-$(CONFIG_OPEN_DICE)		+= open-dice.o
- obj-$(CONFIG_GP_PCI1XXXX)	+= mchp_pci1xxxx/
- obj-$(CONFIG_VCPU_STALL_DETECTOR)	+= vcpu_stall_detector.o
-+obj-$(CONFIG_SUNXI_ADDR_MGT)    += sunxi-addr/
-\ No newline at end of file
-diff --git a/drivers/misc/sunxi-addr/Kconfig b/drivers/misc/sunxi-addr/Kconfig
-new file mode 100644
-index 000000000..801dd2c02
--- /dev/null
-+++ b/drivers/misc/sunxi-addr/Kconfig
-@@ -0,0 +1,6 @@
-+config SUNXI_ADDR_MGT
-+  tristate "Allwinner Network MAC Addess Manager"
-+  depends on BT || ETHERNET || WLAN
-+  depends on NVMEM_SUNXI_SID
-+  help
-+    allwinner network mac address management
-diff --git a/drivers/misc/sunxi-addr/Makefile b/drivers/misc/sunxi-addr/Makefile
-new file mode 100644
-index 000000000..f01fd4783
--- /dev/null
-+++ b/drivers/misc/sunxi-addr/Makefile
-@@ -0,0 +1,5 @@
-+#
-+# Makefile for wifi mac addr manager drivers
-+#
-+sunxi_addr-objs := sunxi-addr.o sha256.o
-+obj-$(CONFIG_SUNXI_ADDR_MGT)   += sunxi_addr.o
-diff --git a/drivers/misc/sunxi-addr/sha256.c b/drivers/misc/sunxi-addr/sha256.c
-new file mode 100644
-index 000000000..78825810c
--- /dev/null
-+++ b/drivers/misc/sunxi-addr/sha256.c
-@@ -0,0 +1,178 @@
-+/*
-+ * Local implement of sha256.
-+ *
-+ * Copyright (C) 2013 Allwinner.
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+#include <linux/kernel.h>
-+#include <linux/string.h>
-+
-+/****************************** MACROS ******************************/
-+#define ROTRIGHT(a, b) (((a) >> (b)) | ((a) << (32 - (b))))
-+#define CH(x, y, z)    (((x) & (y)) ^ (~(x) & (z)))
-+#define MAJ(x, y, z)   (((x) & (y)) ^  ((x) & (z)) ^ ((y) & (z)))
-+#define EP0(x)         (ROTRIGHT(x,  2) ^ ROTRIGHT(x, 13) ^ ROTRIGHT(x, 22))
-+#define EP1(x)         (ROTRIGHT(x,  6) ^ ROTRIGHT(x, 11) ^ ROTRIGHT(x, 25))
-+#define SIG0(x)        (ROTRIGHT(x,  7) ^ ROTRIGHT(x, 18) ^ ((x) >> 3))
-+#define SIG1(x)        (ROTRIGHT(x, 17) ^ ROTRIGHT(x, 19) ^ ((x) >> 10))
-+
-+/**************************** VARIABLES *****************************/
-+static const uint32_t k[64] = {
-+	0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5,
-+	0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5,
-+	0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3,
-+	0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174,
-+	0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc,
-+	0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da,
-+	0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7,
-+	0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967,
-+	0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13,
-+	0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85,
-+	0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3,
-+	0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070,
-+	0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5,
-+	0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3,
-+	0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208,
-+	0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2
-+};
-+
-+struct sha256_ctx {
-+	uint8_t data[64];   /* current 512-bit chunk of message data, just like a buffer */
-+	uint32_t datalen;   /* sign the data length of current chunk */
-+	uint64_t bitlen;    /* the bit length of the total message */
-+	uint32_t state[8];  /* store the middle state of hash abstract */
-+};
-+
-+/*********************** FUNCTION DEFINITIONS ***********************/
-+static void sha256_transform(struct sha256_ctx *ctx, const uint8_t *data)
-+{
-+	uint32_t a, b, c, d, e, f, g, h, i, j, t1, t2, m[64];
-+
-+	/* initialization */
-+	for (i = 0, j = 0; i < 16; ++i, j += 4)
-+		m[i] = (data[j] << 24) | (data[j + 1] << 16) |
-+			(data[j + 2] << 8) | (data[j + 3]);
-+	for ( ; i < 64; ++i)
-+		m[i] = SIG1(m[i - 2]) + m[i - 7] + SIG0(m[i - 15]) + m[i - 16];
-+
-+	a = ctx->state[0];
-+	b = ctx->state[1];
-+	c = ctx->state[2];
-+	d = ctx->state[3];
-+	e = ctx->state[4];
-+	f = ctx->state[5];
-+	g = ctx->state[6];
-+	h = ctx->state[7];
-+
-+	for (i = 0; i < 64; ++i) {
-+		t1 = h + EP1(e) + CH(e, f, g) + k[i] + m[i];
-+		t2 = EP0(a) + MAJ(a, b, c);
-+		h = g;
-+		g = f;
-+		f = e;
-+		e = d + t1;
-+		d = c;
-+		c = b;
-+		b = a;
-+		a = t1 + t2;
-+	}
-+
-+	ctx->state[0] += a;
-+	ctx->state[1] += b;
-+	ctx->state[2] += c;
-+	ctx->state[3] += d;
-+	ctx->state[4] += e;
-+	ctx->state[5] += f;
-+	ctx->state[6] += g;
-+	ctx->state[7] += h;
-+}
-+
-+static void sha256_init(struct sha256_ctx *ctx)
-+{
-+	ctx->datalen = 0;
-+	ctx->bitlen = 0;
-+	ctx->state[0] = 0x6a09e667;
-+	ctx->state[1] = 0xbb67ae85;
-+	ctx->state[2] = 0x3c6ef372;
-+	ctx->state[3] = 0xa54ff53a;
-+	ctx->state[4] = 0x510e527f;
-+	ctx->state[5] = 0x9b05688c;
-+	ctx->state[6] = 0x1f83d9ab;
-+	ctx->state[7] = 0x5be0cd19;
-+}
-+
-+static void sha256_update(struct sha256_ctx *ctx, const uint8_t *data, size_t len)
-+{
-+	uint32_t i;
-+
-+	for (i = 0; i < len; ++i) {
-+		ctx->data[ctx->datalen] = data[i];
-+		ctx->datalen++;
-+		if (ctx->datalen == 64) {
-+			/* 64 byte = 512 bit  means the buffer ctx->data has
-+			 * fully stored one chunk of message,
-+			 * so do the sha256 hash map for the current chunk.
-+			 */
-+			sha256_transform(ctx, ctx->data);
-+			ctx->bitlen += 512;
-+			ctx->datalen = 0;
-+		}
-+	}
-+}
-+
-+static void sha256_final(struct sha256_ctx *ctx, uint8_t *hash)
-+{
-+	uint32_t i;
-+
-+	i = ctx->datalen;
-+
-+	/* Pad whatever data is left in the buffer. */
-+	if (ctx->datalen < 56) {
-+		ctx->data[i++] = 0x80;  /* pad 10000000 = 0x80 */
-+		while (i < 56)
-+			ctx->data[i++] = 0x00;
-+	} else {
-+		ctx->data[i++] = 0x80;
-+		while (i < 64)
-+			ctx->data[i++] = 0x00;
-+		sha256_transform(ctx, ctx->data);
-+		memset(ctx->data, 0, 56);
-+	}
-+
-+	/* Append to the padding the total message's length in bits and transform. */
-+	ctx->bitlen += ctx->datalen * 8;
-+	ctx->data[63] = ctx->bitlen;
-+	ctx->data[62] = ctx->bitlen >> 8;
-+	ctx->data[61] = ctx->bitlen >> 16;
-+	ctx->data[60] = ctx->bitlen >> 24;
-+	ctx->data[59] = ctx->bitlen >> 32;
-+	ctx->data[58] = ctx->bitlen >> 40;
-+	ctx->data[57] = ctx->bitlen >> 48;
-+	ctx->data[56] = ctx->bitlen >> 56;
-+	sha256_transform(ctx, ctx->data);
-+
-+	/* copying the final state to the output hash(use big endian). */
-+	for (i = 0; i < 4; ++i) {
-+		hash[i]      = (ctx->state[0] >> (24 - i * 8)) & 0x000000ff;
-+		hash[i + 4]  = (ctx->state[1] >> (24 - i * 8)) & 0x000000ff;
-+		hash[i + 8]  = (ctx->state[2] >> (24 - i * 8)) & 0x000000ff;
-+		hash[i + 12] = (ctx->state[3] >> (24 - i * 8)) & 0x000000ff;
-+		hash[i + 16] = (ctx->state[4] >> (24 - i * 8)) & 0x000000ff;
-+		hash[i + 20] = (ctx->state[5] >> (24 - i * 8)) & 0x000000ff;
-+		hash[i + 24] = (ctx->state[6] >> (24 - i * 8)) & 0x000000ff;
-+		hash[i + 28] = (ctx->state[7] >> (24 - i * 8)) & 0x000000ff;
-+	}
-+}
-+
-+int hmac_sha256(const uint8_t *plaintext, ssize_t psize, uint8_t *output)
-+{
-+	struct sha256_ctx ctx;
-+
-+	sha256_init(&ctx);
-+	sha256_update(&ctx, plaintext, psize);
-+	sha256_final(&ctx, output);
-+	return 0;
-+}
-diff --git a/drivers/misc/sunxi-addr/sunxi-addr.c b/drivers/misc/sunxi-addr/sunxi-addr.c
-new file mode 100644
-index 000000000..a812e4e82
--- /dev/null
-+++ b/drivers/misc/sunxi-addr/sunxi-addr.c
-@@ -0,0 +1,358 @@
-+/*
-+ * The driver of SUNXI NET MAC ADDR Manager.
-+ *
-+ * Copyright (C) 2013 Allwinner.
-+ *
-+ * This file is licensed under the terms of the GNU General Public
-+ * License version 2.  This program is licensed "as is" without any
-+ * warranty of any kind, whether express or implied.
-+ */
-+#define DEBUG
-+
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/miscdevice.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+
-+#define ADDR_MGT_DBG(fmt, arg...) printk(KERN_DEBUG "[ADDR_MGT] %s: " fmt "\n",\
-+				__func__, ## arg)
-+#define ADDR_MGT_ERR(fmt, arg...) printk(KERN_ERR "[ADDR_MGT] %s: " fmt "\n",\
-+				__func__, ## arg)
-+
-+#define MODULE_CUR_VERSION  "v1.0.9"
-+
-+#define MATCH_STR_LEN       20
-+#define ADDR_VAL_LEN        6
-+#define ADDR_STR_LEN        18
-+#define ID_LEN              16
-+#define HASH_LEN            32
-+
-+#define TYPE_ANY            0
-+#define TYPE_BURN           1
-+#define TYPE_IDGEN          2
-+#define TYPE_USER           3
-+#define TYPE_RAND           4
-+
-+#define ADDR_FMT_STR        0
-+#define ADDR_FMT_VAL        1
-+
-+#define IS_TYPE_INVALID(x)  ((x < TYPE_ANY) || (x > TYPE_RAND))
-+
-+#define ADDR_CLASS_ATTR_ADD(name) \
-+static ssize_t addr_##name##_show(struct class *class, \
-+		struct class_attribute *attr, char *buffer) \
-+{ \
-+	char addr[ADDR_STR_LEN]; \
-+	if (IS_TYPE_INVALID(get_addr_by_name(ADDR_FMT_STR, addr, #name))) \
-+		return 0; \
-+	return sprintf(buffer, "%.17s\n", addr); \
-+} \
-+static ssize_t addr_##name##_store(struct class *class, \
-+		struct class_attribute *attr, \
-+		const char *buffer, size_t count) \
-+{ \
-+	if (count != ADDR_STR_LEN) { \
-+		ADDR_MGT_ERR("Length wrong."); \
-+		return -EINVAL; \
-+	} \
-+	set_addr_by_name(TYPE_USER, ADDR_FMT_STR, buffer, #name); \
-+	return count; \
-+} \
-+static CLASS_ATTR_RW(addr_##name);
-+
-+struct addr_mgt_info {
-+	unsigned int type_def;
-+	unsigned int type_cur;
-+	unsigned int flag;
-+	char *addr;
-+	char *name;
-+};
-+
-+static struct addr_mgt_info info[] = {
-+	{TYPE_ANY, TYPE_ANY, 1, NULL, "wifi"},
-+	{TYPE_ANY, TYPE_ANY, 0, NULL, "bt"  },
-+	{TYPE_ANY, TYPE_ANY, 1, NULL, "eth" },
-+};
-+
-+extern int hmac_sha256(const uint8_t *plaintext, ssize_t psize, uint8_t *output);
-+extern int sunxi_get_soc_chipid(unsigned char *chipid);
-+
-+static int addr_parse(int fmt, const char *addr, int check)
-+{
-+	char val_buf[ADDR_VAL_LEN];
-+	char cmp_buf[ADDR_VAL_LEN];
-+	int  ret = ADDR_VAL_LEN;
-+
-+	if (fmt == ADDR_FMT_STR)
-+		ret = sscanf(addr, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
-+					&val_buf[0], &val_buf[1], &val_buf[2],
-+					&val_buf[3], &val_buf[4], &val_buf[5]);
-+	else
-+		memcpy(val_buf, addr, ADDR_VAL_LEN);
-+
-+	if (ret != ADDR_VAL_LEN)
-+		return -1;
-+
-+	if (check && (val_buf[0] & 0x3))
-+		return -1;
-+
-+	memset(cmp_buf, 0x00, ADDR_VAL_LEN);
-+	if (memcmp(val_buf, cmp_buf, ADDR_VAL_LEN) == 0)
-+		return -1;
-+
-+	memset(cmp_buf, 0xFF, ADDR_VAL_LEN);
-+	if (memcmp(val_buf, cmp_buf, ADDR_VAL_LEN) == 0)
-+		return -1;
-+
-+	return 0;
-+}
-+
-+static struct addr_mgt_info *addr_find_by_name(char *name)
-+{
-+	int i = 0;
-+	for (i = 0; i < ARRAY_SIZE(info); i++) {
-+		if (strcmp(info[i].name, name) == 0)
-+			return &info[i];
-+	}
-+	return NULL;
-+}
-+
-+static int get_addr_by_name(int fmt, char *addr, char *name)
-+{
-+	struct addr_mgt_info *t;
-+
-+	t = addr_find_by_name(name);
-+	if (t == NULL) {
-+		ADDR_MGT_ERR("can't find addr named: %s", name);
-+		return -1;
-+	}
-+
-+	if (IS_TYPE_INVALID(t->type_cur)) {
-+		ADDR_MGT_ERR("addr type invalid");
-+		return -1;
-+	}
-+
-+	if (addr_parse(ADDR_FMT_VAL, t->addr, t->flag)) {
-+		ADDR_MGT_ERR("addr parse fail(%s)", t->addr);
-+		return -1;
-+	}
-+
-+	if (fmt == ADDR_FMT_STR)
-+		sprintf(addr, "%02X:%02X:%02X:%02X:%02X:%02X",
-+				t->addr[0], t->addr[1], t->addr[2],
-+				t->addr[3], t->addr[4], t->addr[5]);
-+	else
-+		memcpy(addr, t->addr, ADDR_VAL_LEN);
-+
-+	return t->type_cur;
-+}
-+
-+static int set_addr_by_name(int type, int fmt, const char *addr, char *name)
-+{
-+	struct addr_mgt_info *t;
-+
-+	t = addr_find_by_name(name);
-+	if (t == NULL) {
-+		ADDR_MGT_ERR("can't find addr named: %s", name);
-+		return -1;
-+	}
-+
-+	if (addr_parse(fmt, addr, t->flag)) {
-+		ADDR_MGT_ERR("addr parse fail(%s)", addr);
-+		return -1;
-+	}
-+
-+	t->type_cur = type;
-+	if (fmt == ADDR_FMT_STR)
-+		sscanf(addr, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
-+				&t->addr[0], &t->addr[1], &t->addr[2],
-+				&t->addr[3], &t->addr[4], &t->addr[5]);
-+	else
-+		memcpy(t->addr, addr, ADDR_VAL_LEN);
-+
-+	return 0;
-+}
-+
-+int get_custom_mac_address(int fmt, char *name, char *addr)
-+{
-+	return get_addr_by_name(fmt, addr, name);
-+}
-+EXPORT_SYMBOL_GPL(get_custom_mac_address);
-+
-+static int addr_factory(struct device_node *np,
-+			int idx, int type, char *mac, char *name)
-+{
-+	int  ret, i;
-+	char match[MATCH_STR_LEN];
-+	const char *p;
-+	char id[ID_LEN], hash[HASH_LEN], cmp_buf[ID_LEN];
-+	struct timespec64 curtime;
-+
-+	switch (type) {
-+	case TYPE_BURN:
-+		sprintf(match, "addr_%s", name);
-+		ret = of_property_read_string_index(np, match, 0, &p);
-+		if (ret)
-+			return -1;
-+
-+		ret = sscanf(p, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
-+			&mac[0], &mac[1], &mac[2],
-+			&mac[3], &mac[4], &mac[5]);
-+
-+		if (ret != ADDR_VAL_LEN)
-+			return -1;
-+		break;
-+	case TYPE_IDGEN:
-+		if (idx > HASH_LEN / ADDR_VAL_LEN - 1)
-+			return -1;
-+		if (sunxi_get_soc_chipid(id))
-+			return -1;
-+		memset(cmp_buf, 0x00, ID_LEN);
-+		if (memcmp(id, cmp_buf, ID_LEN) == 0)
-+			return -1;
-+		if (hmac_sha256(id, ID_LEN, hash))
-+			return -1;
-+		memcpy(mac, &hash[idx * ADDR_VAL_LEN], ADDR_VAL_LEN);
-+		break;
-+	case TYPE_RAND:
-+		for (i = 0; i < ADDR_VAL_LEN; i++) {
-+			ktime_get_real_ts64(&curtime);
-+			mac[i] = (char)curtime.tv_nsec;
-+		}
-+		break;
-+	default:
-+		ADDR_MGT_ERR("unsupport type: %d", type);
-+		return -1;
-+	}
-+	return 0;
-+}
-+
-+static int addr_init(struct platform_device *pdev)
-+{
-+	struct device_node *np = pdev->dev.of_node;
-+	int  type, i, j;
-+	char match[MATCH_STR_LEN];
-+	char addr[ADDR_VAL_LEN];
-+	int  type_tab[] = {TYPE_BURN, TYPE_IDGEN, TYPE_RAND};
-+
-+	/* init addr type and value */
-+	for (i = 0; i < ARRAY_SIZE(info); i++) {
-+		sprintf(match, "type_addr_%s", info[i].name);
-+		if (of_property_read_u32(np, match, &type)) {
-+			ADDR_MGT_DBG("Failed to get type_def_%s, use default: %d",
-+						info[i].name, info[i].type_def);
-+		} else {
-+			info[i].type_def = type;
-+			info[i].type_cur = type;
-+		}
-+
-+		if (IS_TYPE_INVALID(info[i].type_def))
-+			return -1;
-+		if (info[i].type_def != TYPE_ANY) {
-+			if (addr_factory(np, i, info[i].type_def, addr, info[i].name))
-+				return -1;
-+		} else {
-+			for (j = 0; j < ARRAY_SIZE(type_tab); j++) {
-+				if (!addr_factory(np, i, type_tab[j], addr, info[i].name)) {
-+					info[i].type_cur = type_tab[j];
-+					break;
-+				}
-+			}
-+		}
-+
-+		if (info[i].flag)
-+			addr[0] &= 0xFC;
-+
-+		if (addr_parse(ADDR_FMT_VAL, addr, info[i].flag))
-+			return -1;
-+		else {
-+			info[i].addr = devm_kzalloc(&pdev->dev, ADDR_VAL_LEN, GFP_KERNEL);
-+			memcpy(info[i].addr, addr, ADDR_VAL_LEN);
-+		}
-+	}
-+	return 0;
-+}
-+
-+static ssize_t summary_show(struct class *class,
-+				struct class_attribute *attr, char *buffer)
-+{
-+	int i = 0, ret = 0;
-+
-+	ret += sprintf(&buffer[ret], "name cfg cur address\n");
-+	for (i = 0; i < ARRAY_SIZE(info); i++) {
-+		ret += sprintf(&buffer[ret],
-+			"%4s  %d   %d  %02X:%02X:%02X:%02X:%02X:%02X\n",
-+			info[i].name,   info[i].type_def, info[i].type_cur,
-+			info[i].addr[0], info[i].addr[1], info[i].addr[2],
-+			info[i].addr[3], info[i].addr[4], info[i].addr[5]);
-+	}
-+	return ret;
-+}
-+static CLASS_ATTR_RO(summary);
-+
-+ADDR_CLASS_ATTR_ADD(wifi);
-+ADDR_CLASS_ATTR_ADD(bt);
-+ADDR_CLASS_ATTR_ADD(eth);
-+
-+static struct attribute *addr_class_attrs[] = {
-+	&class_attr_summary.attr,
-+	&class_attr_addr_wifi.attr,
-+	&class_attr_addr_bt.attr,
-+	&class_attr_addr_eth.attr,
-+	NULL
-+};
-+ATTRIBUTE_GROUPS(addr_class);
-+
-+static struct class addr_class = {
-+	.name = "addr_mgt",
-+	.owner = THIS_MODULE,
-+	.class_groups = addr_class_groups,
-+};
-+
-+static const struct of_device_id addr_mgt_ids[] = {
-+	{ .compatible = "allwinner,sunxi-addr_mgt" },
-+	{ /* Sentinel */ }
-+};
-+
-+static int addr_mgt_probe(struct platform_device *pdev)
-+{
-+	int status;
-+
-+	ADDR_MGT_DBG("module version: %s", MODULE_CUR_VERSION);
-+	status = class_register(&addr_class);
-+	if (status < 0) {
-+		ADDR_MGT_ERR("class register error, status: %d.", status);
-+		return -1;
-+	}
-+
-+	if (addr_init(pdev)) {
-+		ADDR_MGT_ERR("failed to init addr.");
-+		class_unregister(&addr_class);
-+		return -1;
-+	}
-+	ADDR_MGT_DBG("success.");
-+	return 0;
-+}
-+
-+static int addr_mgt_remove(struct platform_device *pdev)
-+{
-+	class_unregister(&addr_class);
-+	return 0;
-+}
-+
-+static struct platform_driver addr_mgt_driver = {
-+	.probe  = addr_mgt_probe,
-+	.remove = addr_mgt_remove,
-+	.driver = {
-+		.owner = THIS_MODULE,
-+		.name  = "sunxi-addr-mgt",
-+		.of_match_table = addr_mgt_ids,
-+	},
-+};
-+
-+module_platform_driver_probe(addr_mgt_driver, addr_mgt_probe);
-+
-+MODULE_AUTHOR("Allwinnertech");
-+MODULE_DESCRIPTION("Network MAC Addess Manager");
-+MODULE_LICENSE("GPL");
-- 
-2.34.1
-
--- a/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0009-dts-add-addr_mgt-device-tree-node.patch
+++ b/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0009-dts-add-addr_mgt-device-tree-node.patch
@ -1,32 +0,0 @@
-From 706dc6ed092e4a1b9d84893cb4186fbd354bb1c8 Mon Sep 17 00:00:00 2001
-From: pbiel <pbiel7@gmail.com>
-Date: Thu, 26 Jan 2023 09:51:22 +0100
-Subject: [PATCH] Add addr_mgt device tree node
-
---
- arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-index d0b95d43a..15f45a3f9 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-@@ -591,5 +591,15 @@ sunxi-info {
- 			compatible = "allwinner,sun50i-h616-sys-info";
- 			status = "okay";
- 		};
-+
-+		addr_mgt {
-+			compatible = "allwinner,sunxi-addr_mgt";
-+			type_addr_wifi = <0x00>;
-+			type_addr_bt = <0x00>;
-+			type_addr_eth = <0x00>;
-+			status = "okay";
-+			linux,phandle = <0x179>;
-+			phandle = <0x179>;
-+		};
- 	};
- };
-- 
-2.34.1
-
--- a/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0010-dts-add-wifi-power-regulator.patch
+++ b/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0010-dts-add-wifi-power-regulator.patch
@ -1,70 +0,0 @@
-From 899da8366afd97b1ca59b632036dc313777026da Mon Sep 17 00:00:00 2001
-From: pbiel <pbiel7@gmail.com>
-Date: Fri, 24 Feb 2023 22:14:58 +0100
-Subject: [PATCH] Add wifi power regulator
-
---
- .../allwinner/sun50i-h616-orangepi-zero2.dts  | 47 +++++++++++++++++++
- 1 file changed, 47 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-index 02893f3ac..88234a139 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-@@ -49,6 +49,53 @@ reg_vcc5v: vcc5v {
- 		regulator-max-microvolt = <5000000>;
- 		regulator-always-on;
- 	};
-+
-+	reg_vcc33_wifi: vcc33-wifi {
-+		/* Always on 3.3V regulator for WiFi and BT */
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc33-wifi";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		regulator-always-on;
-+		vin-supply = <&reg_vcc5v>;
-+	};
-+
-+	reg_vcc_wifi_io: vcc-wifi-io {
-+		/* Always on 1.8V/300mA regulator for WiFi and BT IO */
-+		compatible = "regulator-fixed";
-+		regulator-name = "vcc-wifi-io";
-+		regulator-min-microvolt = <1800000>;
-+		regulator-max-microvolt = <1800000>;
-+		regulator-always-on;
-+		vin-supply = <&reg_vcc33_wifi>;
-+	};
-+
-+	wifi_pwrseq: wifi-pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		clocks = <&rtc 1>;
-+		clock-names = "osc32k-out";
-+		reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */
-+		post-power-on-delay-ms = <200>;
-+	};
-+};
-+
-+&mmc1 {
-+	vmmc-supply = <&reg_vcc33_wifi>;
-+	vqmmc-supply = <&reg_vcc_wifi_io>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
-+	bus-width = <4>;
-+	non-removable;
-+	mmc-ddr-1_8v;
-+	status = "okay";
-+	uwe-bsp {
-+		compatible = "unisoc,uwe_bsp";
-+		keep-power-on;
-+		data-irq;
-+		//adma-tx;
-+		adma-rx;
-+		//blksz-512;
-+		status = "okay";
-+	};
- };
- 
- &emac0 {
-- 
-2.34.1
-
--- a/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0011-dts-add-usb-to-h616.patch
+++ b/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0011-dts-add-usb-to-h616.patch
@ -1,184 +0,0 @@
-From ab35c98369d50766eb20920a93a2dca927935481 Mon Sep 17 00:00:00 2001
-From: OpenEmbedded <oe.patch@oe>
-Date: Fri, 19 May 2023 23:01:14 +0200
-Subject: [PATCH] Add usb support to h616. This is not needed from kernel 6.2
-
-Signed-off-by: OpenEmbedded <oe.patch@oe>
---
- .../arm64/boot/dts/allwinner/sun50i-h616.dtsi | 160 ++++++++++++++++++
- 1 file changed, 160 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-index 04cdec7e2..a1d872e74 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616.dtsi
-@@ -504,6 +504,166 @@ mdio0: mdio {
- 			};
- 		};
- 
-+		usbotg: usb@5100000 {
-+			compatible = "allwinner,sun50i-h616-musb",
-+				     "allwinner,sun8i-h3-musb";
-+			reg = <0x05100000 0x0400>;
-+			clocks = <&ccu CLK_BUS_OTG>;
-+			resets = <&ccu RST_BUS_OTG>;
-+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-+			interrupt-names = "mc";
-+			phys = <&usbphy 0>;
-+			phy-names = "usb";
-+			extcon = <&usbphy 0>;
-+			status = "disabled";
-+		};
-+
-+		usbphy: phy@5100400 {
-+			compatible = "allwinner,sun50i-h616-usb-phy";
-+			reg = <0x05100400 0x24>,
-+			      <0x05101800 0x14>,
-+			      <0x05200800 0x14>,
-+			      <0x05310800 0x14>,
-+			      <0x05311800 0x14>;
-+			reg-names = "phy_ctrl",
-+				    "pmu0",
-+				    "pmu1",
-+				    "pmu2",
-+				    "pmu3";
-+			clocks = <&ccu CLK_USB_PHY0>,
-+				 <&ccu CLK_USB_PHY1>,
-+				 <&ccu CLK_USB_PHY2>,
-+				 <&ccu CLK_USB_PHY3>,
-+				 <&ccu CLK_BUS_EHCI2>;
-+			clock-names = "usb0_phy",
-+				      "usb1_phy",
-+				      "usb2_phy",
-+				      "usb3_phy",
-+				      "pmu2_clk";
-+			resets = <&ccu RST_USB_PHY0>,
-+				 <&ccu RST_USB_PHY1>,
-+				 <&ccu RST_USB_PHY2>,
-+				 <&ccu RST_USB_PHY3>;
-+			reset-names = "usb0_reset",
-+				      "usb1_reset",
-+				      "usb2_reset",
-+				      "usb3_reset";
-+			status = "disabled";
-+			#phy-cells = <1>;
-+		};
-+
-+		ehci0: usb@5101000 {
-+			compatible = "allwinner,sun50i-h616-ehci",
-+				     "generic-ehci";
-+			reg = <0x05101000 0x100>;
-+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ccu CLK_BUS_OHCI0>,
-+				 <&ccu CLK_BUS_EHCI0>,
-+				 <&ccu CLK_USB_OHCI0>;
-+			resets = <&ccu RST_BUS_OHCI0>,
-+				 <&ccu RST_BUS_EHCI0>;
-+			phys = <&usbphy 0>;
-+			phy-names = "usb";
-+			status = "disabled";
-+		};
-+
-+		ohci0: usb@5101400 {
-+			compatible = "allwinner,sun50i-h616-ohci",
-+				     "generic-ohci";
-+			reg = <0x05101400 0x100>;
-+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ccu CLK_BUS_OHCI0>,
-+				 <&ccu CLK_USB_OHCI0>;
-+			resets = <&ccu RST_BUS_OHCI0>;
-+			phys = <&usbphy 0>;
-+			phy-names = "usb";
-+			status = "disabled";
-+		};
-+
-+		ehci1: usb@5200000 {
-+			compatible = "allwinner,sun50i-h616-ehci",
-+				     "generic-ehci";
-+			reg = <0x05200000 0x100>;
-+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ccu CLK_BUS_OHCI1>,
-+				 <&ccu CLK_BUS_EHCI1>,
-+				 <&ccu CLK_USB_OHCI1>;
-+			resets = <&ccu RST_BUS_OHCI1>,
-+				 <&ccu RST_BUS_EHCI1>;
-+			phys = <&usbphy 1>;
-+			phy-names = "usb";
-+			status = "disabled";
-+		};
-+
-+		ohci1: usb@5200400 {
-+			compatible = "allwinner,sun50i-h616-ohci",
-+				     "generic-ohci";
-+			reg = <0x05200400 0x100>;
-+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ccu CLK_BUS_OHCI1>,
-+				 <&ccu CLK_USB_OHCI1>;
-+			resets = <&ccu RST_BUS_OHCI1>;
-+			phys = <&usbphy 1>;
-+			phy-names = "usb";
-+			status = "disabled";
-+		};
-+
-+		ehci2: usb@5310000 {
-+			compatible = "allwinner,sun50i-h616-ehci",
-+				     "generic-ehci";
-+			reg = <0x05310000 0x100>;
-+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ccu CLK_BUS_OHCI2>,
-+				 <&ccu CLK_BUS_EHCI2>,
-+				 <&ccu CLK_USB_OHCI2>;
-+			resets = <&ccu RST_BUS_OHCI2>,
-+				 <&ccu RST_BUS_EHCI2>;
-+			phys = <&usbphy 2>;
-+			phy-names = "usb";
-+			status = "disabled";
-+		};
-+
-+		ohci2: usb@5310400 {
-+			compatible = "allwinner,sun50i-h616-ohci",
-+				     "generic-ohci";
-+			reg = <0x05310400 0x100>;
-+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ccu CLK_BUS_OHCI2>,
-+				 <&ccu CLK_USB_OHCI2>;
-+			resets = <&ccu RST_BUS_OHCI2>;
-+			phys = <&usbphy 2>;
-+			phy-names = "usb";
-+			status = "disabled";
-+		};
-+
-+		ehci3: usb@5311000 {
-+			compatible = "allwinner,sun50i-h616-ehci",
-+				     "generic-ehci";
-+			reg = <0x05311000 0x100>;
-+			interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ccu CLK_BUS_OHCI3>,
-+				 <&ccu CLK_BUS_EHCI3>,
-+				 <&ccu CLK_USB_OHCI3>;
-+			resets = <&ccu RST_BUS_OHCI3>,
-+				 <&ccu RST_BUS_EHCI3>;
-+			phys = <&usbphy 3>;
-+			phy-names = "usb";
-+			status = "disabled";
-+		};
-+
-+		ohci3: usb@5311400 {
-+			compatible = "allwinner,sun50i-h616-ohci",
-+				     "generic-ohci";
-+			reg = <0x05311400 0x100>;
-+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
-+			clocks = <&ccu CLK_BUS_OHCI3>,
-+				 <&ccu CLK_USB_OHCI3>;
-+			resets = <&ccu RST_BUS_OHCI3>;
-+			phys = <&usbphy 3>;
-+			phy-names = "usb";
-+			status = "disabled";
-+		};
-+
- 		rtc: rtc@7000000 {
- 			compatible = "allwinner,sun50i-h616-rtc";
- 			reg = <0x07000000 0x400>;
-- 
-2.40.1
-
--- a/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0012-dts-orange-pi-zero2.patch
+++ b/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/0012-dts-orange-pi-zero2.patch
@ -1,84 +0,0 @@
-From 038441bbe0f6dab3e701061c514a8d776dbe6523 Mon Sep 17 00:00:00 2001
-From: OpenEmbedded <oe.patch@oe>
-Date: Sat, 20 May 2023 14:07:47 +0200
-Subject: [PATCH] DTS orange pi zero2 enable usb
-
-Signed-off-by: OpenEmbedded <oe.patch@oe>
---
- .../allwinner/sun50i-h616-orangepi-zero2.dts  | 42 +++++++++++++++++++
- 1 file changed, 42 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-index 88234a139..3b836296b 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-orangepi-zero2.dts
-@@ -50,6 +50,16 @@ reg_vcc5v: vcc5v {
- 		regulator-always-on;
- 	};
- 
-+        reg_usb1_vbus: regulator-usb1-vbus {
-+                compatible = "regulator-fixed";
-+                regulator-name = "usb1-vbus";
-+                regulator-min-microvolt = <5000000>;
-+                regulator-max-microvolt = <5000000>;
-+                vin-supply = <&reg_vcc5v>;
-+                enable-active-high;
-+                gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
-+        };
-+
- 	reg_vcc33_wifi: vcc33-wifi {
- 		/* Always on 3.3V regulator for WiFi and BT */
- 		compatible = "regulator-fixed";
-@@ -79,6 +89,12 @@ wifi_pwrseq: wifi-pwrseq {
- 	};
- };
- 
-+&ehci1 {
-+        status = "okay";
-+};
-+
-+/* USB 2 & 3 are on headers only. */
-+
- &mmc1 {
- 	vmmc-supply = <&reg_vcc33_wifi>;
- 	vqmmc-supply = <&reg_vcc_wifi_io>;
-@@ -123,6 +139,11 @@ &mmc0 {
- 	status = "okay";
- };
- 
-+
-+&ohci1 {
-+	status = "okay";
-+};
-+
- &r_rsb {
- 	status = "okay";
- 
-@@ -258,3 +279,24 @@ &uart0 {
- 	pinctrl-0 = <&uart0_ph_pins>;
- 	status = "okay";
- };
-+
-+&usbotg {
-+	/*
-+	 * PHY0 pins are connected to a USB-C socket, but a role switch
-+	 * is not implemented: both CC pins are pulled to GND.
-+	 * The VBUS pins power the device, so a fixed peripheral mode
-+	 * is the best choice.
-+	 * The board can be powered via GPIOs, in this case port0 *can*
-+	 * act as a host (with a cable/adapter ignoring CC), as VBUS is
-+	 * then provided by the GPIOs. Any user of this setup would
-+	 * need to adjust the DT accordingly: dr_mode set to "host",
-+	 * enabling OHCI0 and EHCI0.
-+	 */
-+	dr_mode = "peripheral";
-+	status = "okay";
-+};
-+
-+&usbphy {
-+	usb1_vbus-supply = <&reg_usb1_vbus>;
-+	status = "okay";
-+};
-- 
-2.40.1
-
--- a/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/defconfig
+++ b/recipes-kernel/linux/linux-mainline-6.1.9/orange-pi-zero2/defconfig
--- a/recipes-kernel/linux/linux-mainline.inc
+++ b/recipes-kernel/linux/linux-mainline.inc
@ -1,6 +1,5 @@
 SECTION = "kernel"
-LICENSE = "GPL-2.0-only"
-LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"
+LICENSE = "GPLv2"
 COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i|sun8i|sun50i)"

 inherit kernel
@ -20,21 +19,14 @@ KERNEL_EXTRA_ARGS += "LOADADDR=${UBOOT_ENTRYPOINT}"

 S = "${WORKDIR}/linux-${PV}"

-# get release version 5.x or 6.x based on version
-KRELEASE = "${@d.getVar('PV', True).split('.')[0]}"
-
-SRC_URI = "https://www.kernel.org/pub/linux/kernel/v${KRELEASE}.x/linux-${PV}.tar.xz \
+SRC_URI = "https://www.kernel.org/pub/linux/kernel/v5.x/linux-${PV}.tar.xz \
+	file://0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch \
 	file://0001-dts-orange-pi-zero-Add-wifi-support.patch \
-	file://0002-dts-nanopi-neo-air-add-camera.patch \
-	file://0003-dts-allwinner-bananapi-m2-zreo-Enforce-consistent-MM.patch \
-	file://0004-dts-allwinner-bananapi-m64-Consistent-nodes-for-mmc-devices.patch \
 	file://defconfig \
 "

-SRC_URI:append:use-mailine-graphics = " file://drm.cfg"
-SRC_URI:append:bananapi = " file://axp20x.cfg"
-SRC_URI:append:bananapi-m2-zero = " file://axp20x.cfg"
-SRC_URI:append:cubietruck = " file://axp20x.cfg"
-SRC_URI:append:nanopi-neo-air = " file://cam500b.cfg"
+SRC_URI_append_use-mailine-graphics = " file://drm.cfg"
+SRC_URI_append_bananapi = " file://axp20x.cfg"
+SRC_URI_append_cubietruck = " file://axp20x.cfg"

-FILES_${KERNEL_PACKAGE_NAME}-base:append = " ${nonarch_base_libdir}/modules/${KERNEL_VERSION}/modules.builtin.modinfo"
+FILES_${KERNEL_PACKAGE_NAME}-base_append = " ${nonarch_base_libdir}/modules/${KERNEL_VERSION}/modules.builtin.modinfo"
--- a/recipes-kernel/linux/linux-mainline/0002-dts-nanopi-neo-air-add-camera.patch
+++ b/recipes-kernel/linux/linux-mainline/0002-dts-nanopi-neo-air-add-camera.patch
@ -1,101 +0,0 @@
-diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
-index cd3df12b65..33a161692f 100644
--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
-+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
-@@ -77,6 +77,39 @@
- 		compatible = "mmc-pwrseq-simple";
- 		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
- 	};
-+
-+        cam_xclk: cam-xclk {
-+                #clock-cells = <0>;
-+                compatible = "fixed-clock";
-+                clock-frequency = <24000000>;
-+                clock-output-names = "cam-xclk";
-+        };
-+
-+        reg_cam_avdd: cam-avdd {
-+                compatible = "regulator-fixed";
-+                regulator-name = "cam-avdd";
-+                regulator-min-microvolt = <2800000>;
-+                regulator-max-microvolt = <2800000>;
-+                vin-supply = <&reg_vcc3v3>;
-+        };
-+
-+        reg_cam_dovdd: cam-dovdd {
-+                compatible = "regulator-fixed";
-+                regulator-name = "cam-dovdd";
-+                regulator-min-microvolt = <1800000>;
-+                regulator-max-microvolt = <1800000>;
-+                vin-supply = <&reg_vcc3v3>;
-+        };
-+
-+        reg_cam_dvdd: cam-dvdd {
-+                compatible = "regulator-fixed";
-+                regulator-name = "cam-dvdd";
-+                regulator-min-microvolt = <1500000>;
-+                regulator-max-microvolt = <1500000>;
-+                vin-supply = <&reg_vcc3v3>;
-+        };
-+
-+
- };
- 
- &mmc0 {
-@@ -141,3 +174,55 @@
- 	/* USB VBUS is always on */
- 	status = "okay";
- };
-+
-+&csi {
-+    status = "okay";
-+
-+    port {
-+        #address-cells = <1>;
-+        #size-cells = <0>;
-+
-+        /* Parallel bus endpoint */
-+        csi_from_ov5640: endpoint {
-+            remote-endpoint = <&ov5640_to_csi>;
-+            bus-width = <8>;
-+            data-shift = <2>;
-+            hsync-active = <1>; /* Active high */
-+            vsync-active = <0>; /* Active low */
-+            data-active = <1>;  /* Active high */
-+            pclk-sample = <1>;  /* Rising */
-+        };
-+    };
-+};
-+
-+&i2c2 {
-+   status = "okay";
-+
-+   ov5640: camera@3c {
-+        compatible = "ovti,ov5640";
-+        reg = <0x3c>;
-+        clocks = <&cam_xclk>;
-+        clock-names = "xclk";
-+
-+        reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>;
-+        powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>;
-+        AVDD-supply = <&reg_cam_avdd>;
-+        DOVDD-supply = <&reg_cam_dovdd>;
-+        DVDD-supply = <&reg_cam_dvdd>;
-+
-+        port {
-+            ov5640_to_csi: endpoint {
-+                remote-endpoint = <&csi_from_ov5640>;
-+                bus-width = <8>;
-+                data-shift = <2>;
-+                hsync-active = <1>; /* Active high */
-+                vsync-active = <0>; /* Active low */
-+                data-active = <1>;  /* Active high */
-+                pclk-sample = <1>;  /* Rising */
-+            };
-+        };
-+    };
-+};
-+&i2c2_pins {
-+   bias-pull-up;
-+};
-
--- a/recipes-kernel/linux/linux-mainline/0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch
+++ b/recipes-kernel/linux/linux-mainline/0003-ARM-dts-nanopi-neo-air-Add-WiFi-eMMC.patch
@ -0,0 +1,80 @@
+From 4ca766a768e783ee5198f1935b7f46a5df9b4a35 Mon Sep 17 00:00:00 2001
+From: Jelle van der Waa <jelle@vdwaa.nl>
+Date: Tue, 23 Jan 2018 15:58:44 -0800
+Subject: [PATCH] ARM: dts: nanopi-neo-air: Add WiFi / eMMC
+
+Enable the WiFi (AP6212) chip and eMMC support for the NanoPi NEO Air.
+
+This patch was originally submitted by Jelle van der Waa. Martin Kelly
+modified it to compile on the latest kernel, fixed up some review
+comments from Maxime Ripard, and re-tested the patch.
+
+The patch has been reworked to add back eMMC support which has been left
+out at the last backport.
+
+Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
+Cc: linux-sunxi@googlegroups.com
+Cc: devicetree@vger.kernel.org
+Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
+Signed-off-by: Martin Kelly <mkelly@xevo.com>
+Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
+Signed-off-by: Florin Sarbu <florin@resin.io>
+---
+ arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts | 34 +++++++++++++++++++++++++++
+ 1 file changed, 34 insertions(+)
+
+diff --git a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+index 03ff6f8..a9331fe 100644
+--- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo-air.dts
+@@ -72,6 +72,11 @@
+ 			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
+ 		};
+ 	};
+
+	wifi_pwrseq: wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
+	};
+ };
+ 
+ &mmc0 {
+@@ -84,6 +89,35 @@
+ 	status = "okay";
+ };
+ 
+&mmc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_a>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&mmc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_8bit_pins>;
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+ &uart0 {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&uart0_pins_a>;
+-- 
+2.11.0
+
--- a/recipes-kernel/linux/linux-mainline/0003-dts-allwinner-bananapi-m2-zreo-Enforce-consistent-MM.patch
+++ b/recipes-kernel/linux/linux-mainline/0003-dts-allwinner-bananapi-m2-zreo-Enforce-consistent-MM.patch
@ -1,28 +0,0 @@
-From 9b4baa9b5aab0511c46a1ae95485e1a3ea984352 Mon Sep 17 00:00:00 2001
-From: matteolel <matteolel91@hotmail.it>
-Date: Fri, 9 Dec 2022 16:38:11 +0000
-Subject: [PATCH] dts: allwinner: bananapi-m2-zreo: Enforce consistent MMC
- numbering
-
-Enforce MMC number (sometimes the order was wrong and the device does not boot).
---
- arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts | 3 +++
- 1 file changed, 3 insertions(+)
-
-diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
-index 8e8634ff2..37a2ed937 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
-+++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
-@@ -20,6 +20,9 @@ / {
- 	aliases {
- 		serial0 = &uart0;
- 		serial1 = &uart1;
-+		mmc0 = &mmc0;
-+		mmc1 = &mmc1;
-+		mmc2 = &mmc2;
- 	};
- 
- 	chosen {
-- 
-2.25.1
-
--- a/recipes-kernel/linux/linux-mainline/0004-dts-allwinner-bananapi-m64-Consistent-nodes-for-mmc-devices.patch
+++ b/recipes-kernel/linux/linux-mainline/0004-dts-allwinner-bananapi-m64-Consistent-nodes-for-mmc-devices.patch
@ -1,27 +0,0 @@
-From f487f62babb11d014da7a0b58a0fcdf6d217a812 Mon Sep 17 00:00:00 2001
-From: Marek Belisko <marek.belisko@open-nandra.com>
-Date: Thu, 11 May 2023 11:18:33 +0200
-Subject: [PATCH] bananapi-m64: Consistent nodes for mmc devices
-
-Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
---
- arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts | 3 +++
- 1 file changed, 3 insertions(+)
-
-diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
-index e6d5bc0f7..39a28aad8 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
-+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts
-@@ -16,6 +16,9 @@ aliases {
- 		ethernet0 = &emac;
- 		serial0 = &uart0;
- 		serial1 = &uart1;
-+                mmc0 = &mmc0;
-+                mmc1 = &mmc1;
-+                mmc2 = &mmc2;
- 	};
- 
- 	chosen {
-- 
-2.25.1
-
--- a/recipes-kernel/linux/linux-mainline/cam500b.cfg
+++ b/recipes-kernel/linux/linux-mainline/cam500b.cfg
@ -1,6 +0,0 @@
-CONFIG_MEDIA_PLATFORM_SUPPORT=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
-
-CONFIG_VIDEO_OV5640=m
-CONFIG_VIDEO_SUN6I_CSI=m
-CONFIG_VIDEO_V4L2=m
--- a/recipes-kernel/linux/linux-mainline_5.10.166.bb
+++ b/recipes-kernel/linux/linux-mainline_5.10.166.bb
@ -4,4 +4,5 @@ DESCRIPTION = "Mainline Longterm Linux kernel"

 LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46"

-SRC_URI[sha256sum] = "0051a1780e5bda0efc68dafab7c728b8283d2b028fedb439418f478be7d3e1af"
+SRC_URI[md5sum] = "0751179f60de73eb2cd93f161fa52fcf"
+SRC_URI[sha256sum] = "3b84e13abae26af17ebccc4d7212f5843a991127a73a320848d5c6942ef781a2"
--- a/recipes-kernel/linux/linux-mainline_5.15.91.bb
+++ b/recipes-kernel/linux/linux-mainline_5.15.91.bb
@ -1,7 +0,0 @@
-require linux-mainline.inc
-
-DESCRIPTION = "Mainline Longterm Linux kernel"
-
-LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46"
-
-SRC_URI[sha256sum] = "a63c2bb1beb15f1aea9c63cf80559f5b7ab58afd2da2fa5e7670c515ebe1fe80"
--- a/recipes-kernel/linux/linux-mainline_5.4.230.bb
+++ b/recipes-kernel/linux/linux-mainline_5.4.230.bb
@ -4,4 +4,5 @@ DESCRIPTION = "Mainline Longterm Linux kernel"

 LIC_FILES_CHKSUM = "file://COPYING;md5=bbea815ee2795b2f4230826c0c6b8814"

-SRC_URI[sha256sum] = "a74fd32ccc1025b72f3ba7183208761f7c6190fb96e8f484f6d543a5a183e62f"
+SRC_URI[md5sum] = "98c8187b801f006ba203db0669e307a5"
+SRC_URI[sha256sum] = "a8b31d716b397303a183e42ad525ff2871024a43e3ea530d0fdf73b7f9d27da7"
--- a/recipes-kernel/linux/linux-mainline_6.1.9.bb
+++ b/recipes-kernel/linux/linux-mainline_6.1.9.bb
@ -1,23 +0,0 @@
-require linux-mainline.inc
-
-DESCRIPTION = "Mainline Longterm Linux kernel"
-
-LIC_FILES_CHKSUM = "file://COPYING;md5=6bc538ed5bd9a7fc9398086aedcd7e46"
-
-SRC_URI[sha256sum] = "d60cf185693c386e7acd9f3eb3a94ae30ffbfee0a9447a20e83711e0bdf5922b"
-
-SRC_URI:append:orange-pi-zero2  = " \
-        file://defconfig \
-        file://0001-drv-wireless-add-uwe5622-wifi-driver.patch \
-        file://0002-drv-wireless-driver-for-uwe5622-allwinner-bugfix.patch \
-        file://0003-drv-fix-incldue-path-for-unisocwcn.patch \
-        file://0004-drv-wireless-adapt-uwe5622-wifi-driver-to-kernel-6.1.patch \
-        file://0005-drv-fix-setting-mac-address-for-netdev-in-uwe5622.patch \
-        file://0006-drv-add-dump_reg-and-sunxi-sysinfo-drivers.patch \
-        file://0007-drv-add-sunxi_get_soc_chipid-and-sunxi_get_serial.patch \
-        file://0008-drv-add-sunxi-addr-driver.patch \
-        file://0009-dts-add-addr_mgt-device-tree-node.patch \
-        file://0010-dts-add-wifi-power-regulator.patch \
-        file://0011-dts-add-usb-to-h616.patch \
-        file://0012-dts-orange-pi-zero2.patch \
-"
--- a/recipes-kernel/linux/linux-sunxi_3.4.bb
+++ b/recipes-kernel/linux/linux-sunxi_3.4.bb
@ -3,15 +3,15 @@ require linux.inc
 DESCRIPTION = "Linux kernel for Allwinner a10/a20 processors"

 COMPATIBLE_MACHINE = "(sun4i|sun5i|sun7i)"
-RDEPENDS:${PN} += "sunxi-board-fex"
+RDEPENDS_${PN} += "sunxi-board-fex"

 PV = "3.4.104"
 PR = "r1"
-SRCREV = "d47d367036be38c5180632ec8a3ad169a4593a88"
+SRCREV_pn-${PN} = "d47d367036be38c5180632ec8a3ad169a4593a88"

-MACHINE_KERNEL_PR:append = "a"
+MACHINE_KERNEL_PR_append = "a"

-SRC_URI += "git://github.com/linux-sunxi/linux-sunxi.git;branch=sunxi-3.4;protocol=https \
+SRC_URI += "git://github.com/linux-sunxi/linux-sunxi.git;branch=sunxi-3.4;protocol=git \
        file://0001-compiler-gcc-integrate-the-various-compiler-gcc-345-.patch \
        file://0002-use-static-inline-in-ARM-ftrace.patch \
        file://0003-gcc5-fixes.patch \
@ -26,7 +26,7 @@ S = "${WORKDIR}/git"
 #fix QA issue "Files/directories were installed but not shipped: /usr/src/debug"
 INHIBIT_PACKAGE_DEBUG_SPLIT = "1"

-do_configure:prepend() {
+do_configure_prepend() {
    #fix arch QA issues ("Architecture did not match")
    rm -f ${S}/drivers/net/wireless/rtxx7x/tools/bin2h
    rm -f ${S}/modules/wifi/ar6302/AR6K_SDK_ISC.build_3.1_RC.329/host/lib/wac/wac
--- a/recipes-kernel/linux/linux.inc
+++ b/recipes-kernel/linux/linux.inc
@ -39,7 +39,7 @@ do_kernel_configme[depends] += "virtual/${TARGET_PREFIX}binutils:do_populate_sys
 do_kernel_configme[depends] += "virtual/${TARGET_PREFIX}gcc:do_populate_sysroot"
 do_kernel_configme[depends] += "bc-native:do_populate_sysroot bison-native:do_populate_sysroot"

-do_configure:prepend() {
+do_configure_prepend() {
    CONF_SED_SCRIPT=""

    #
@ -118,9 +118,15 @@ do_configure:prepend() {
    yes '' | oe_runmake -C ${S} O=${B} oldconfig
 }

-do_configure:append() {
+do_configure_append() {
    if test -e scripts/Makefile.fwinst ; then
        sed -i -e "s:-m0644:-m 0644:g" scripts/Makefile.fwinst
    fi
 }

+do_install_append() {
+    oe_runmake headers_install INSTALL_HDR_PATH=${D}${exec_prefix}/src/linux-${KERNEL_VERSION} ARCH=$ARCH
+}
+
+PACKAGES =+ "kernel-headers"
+FILES_kernel-headers = "${exec_prefix}/src/linux*"
--- a/recipes-kernel/uwe5622-firmware/files/wcnmodem.bin
+++ b/recipes-kernel/uwe5622-firmware/files/wcnmodem.bin
--- a/recipes-kernel/uwe5622-firmware/files/wifi_2355b001_1ant.ini
+++ b/recipes-kernel/uwe5622-firmware/files/wifi_2355b001_1ant.ini
@ -1,177 +0,0 @@
-[Section 1: Version]
-Major = 2
-Minor = 2
-
-[Section 2: Board Config]
-Calib_Bypass = 11758
-TxChain_Mask = 2
-RxChain_Mask = 2
-
-[Section 3: Board Config TPC]
-DPD_LUT_idx = 0x33,0x33,0x0,0x11,0x22,0x33,0x33,0x33
-TPC_Goal_Chain0 = 0,0,0,0,0,0,0,0
-TPC_Goal_Chain1 = 159,167,162,152,159,167,162,152
-
-[Section 4: TPC-LUT]
-Chain0_LUT_0 = 6,0,40,0
-Chain0_LUT_1 = 6,1,24,0
-Chain0_LUT_2 = 6,2,8,0
-Chain0_LUT_3 = 10,2,0,0
-Chain0_LUT_4 = 14,2,0,0
-Chain0_LUT_5 = 18,2,0,0
-Chain0_LUT_6 = 22,2,0,0
-Chain0_LUT_7 = 26,2,0,0
-Chain1_LUT_0 = 6,0,40,0
-Chain1_LUT_1 = 6,1,24,0
-Chain1_LUT_2 = 6,2,8,0
-Chain1_LUT_3 = 10,2,0,0
-Chain1_LUT_4 = 14,2,0,0
-Chain1_LUT_5 = 18,2,0,0
-Chain1_LUT_6 = 22,2,0,0
-Chain1_LUT_7 = 26,2,0,0
-
-[Section 5: Board Config Frequency Compensation]
-2G_Channel_Chain0 = 6,6,6,6,7,7,7,7,7,7,7,7,7,7
-2G_Channel_Chain1 = 6,6,6,6,7,7,7,7,7,7,7,7,7,7
-5G_Channel_Chain0 = 11,11,11,11,9,9,9,9,10,10,10,10,10,10,10,10,10,10,10,10,9,9,9,9,9
-5G_Channel_Chain1 = 11,11,11,11,9,9,9,9,10,10,10,10,10,10,10,10,10,10,10,10,9,9,9,9,9
-
-[Section 6: Rate To Power with BW 20M]
-11b_Power = 20,20,20,20
-11ag_Power = 28,32,36,44,28,32,36,48
-11n_Power = 34,38,38,40,40,44,44,48,32,36,36,40,40,44,44,54,48
-11ac_Power = 32,36,36,40,40,44,44,48,50,66,32,36,36,40,40,44,44,48,50,66
-
-[Section 7: Power Backoff]
-Green_WIFI_offset = 0
-HT40_Power_offset = 0
-VHT40_Power_offset = 0
-VHT80_Power_offset = 0
-SAR_Power_offset = 0
-Mean_Power_offset = 36
-
-[Section 8: Reg Domain]
-reg_domain1 = 0x00000001
-reg_domain2 = 0x00000002
-
-[Section 9: Band Edge Power offset (MKK, FCC, ETSI)]
-BW20M = 3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41
-BW40M = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21
-BW80M = 6,5,4,3,2,1
-
-[Section 10: TX Scale]
-Chain0_1 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16
-Chain1_1 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16
-Chain0_2 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,17
-Chain1_2 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,17
-Chain0_3 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,18
-Chain1_3 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,18
-Chain0_4 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,19
-Chain1_4 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,19
-Chain0_5 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,20
-Chain1_5 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,20
-Chain0_6 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,21
-Chain1_6 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,21
-Chain0_7 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,22
-Chain1_7 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,22
-Chain0_8 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,23
-Chain1_8 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,23
-Chain0_9 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,24
-Chain1_9 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,24
-Chain0_10 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,25
-Chain1_10 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,25
-Chain0_11 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,26
-Chain1_11 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,26
-Chain0_12 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,27
-Chain1_12 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,27
-Chain0_13 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,28
-Chain1_13 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,28
-Chain0_14 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,29
-Chain1_14 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,29
-Chain0_36 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,30
-Chain1_36 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,30
-Chain0_40 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,31
-Chain1_40 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,31
-Chain0_44 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,32
-Chain1_44 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,32
-Chain0_48 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,33
-Chain1_48 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,33
-Chain0_52 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,34
-Chain1_52 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,34
-Chain0_56 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,35
-Chain1_56 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,35
-Chain0_60 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,36
-Chain1_60 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,36
-Chain0_64 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,37
-Chain1_64 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,37
-Chain0_100 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,38
-Chain1_100 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,38
-Chain0_104 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,39
-Chain1_104 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,39
-Chain0_108 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,40
-Chain1_108 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,40
-Chain0_112 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,41
-Chain1_112 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,41
-Chain0_116 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,42
-Chain1_116 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,42
-Chain0_120 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,43
-Chain1_120 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,43
-Chain0_124 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,44
-Chain1_124 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,44
-Chain0_128 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,45
-Chain1_128 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,45
-Chain0_132 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,46
-Chain1_132 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,46
-Chain0_136 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,47
-Chain1_136 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,47
-Chain0_140 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,48
-Chain1_140 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,48
-Chain0_144 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,49
-Chain1_144 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,49
-Chain0_149 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,50
-Chain1_149 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,50
-Chain0_153 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,51
-Chain1_153 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,51
-Chain0_157 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,52
-Chain1_157 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,52
-Chain0_161 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,53
-Chain1_161 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,53
-Chain0_165 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,54
-Chain1_165 = 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,54
-
-[Section 11: misc]
-DFS_switch = 1
-power_save_switch = 2
-ex-Fem_and_ex-LNA_param_setup = 3
-rssi_report_diff = 4
-
-[Section 12: debug reg]
-address = 0x1,0x2,0x3,0x4,0x5,0x6,0x7,0x8,0x9,0x10,0x11,0x12,0x13,0x14,0x15,0x16
-value = 0x16,0x17,0x18,0x19,0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27,0x28,0x29,0x30,0x31
-
-[Section 13: coex_config]
-bt_performance_cfg0 = 0x01010101
-bt_performance_cfg1 = 0x01000000
-wifi_performance_cfg0 = 0x01050A01
-wifi_performance_cfg2 = 0x00000000
-strategy_cfg0 = 0x01010100
-strategy_cfg1 = 0x03000000
-strategy_cfg2 = 0x08020000
-compatibility_cfg0 = 0x04040000
-compatibility_cfg1 = 0x0
-ant_cfg0 = 0x0
-ant_cfg1 = 0x0
-isolation_cfg0 = 0x0505
-isolation_cfg1 = 0x0
-reserved_cfg0 = 0x0
-reserved_cfg1 = 0x0
-reserved_cfg2 = 0x0
-reserved_cfg3 = 0x0
-reserved_cfg4 = 0x0
-reserved_cfg5 = 0x0
-reserved_cfg6 = 0x0
-reserved_cfg7 = 0x0
-
-[Section 14: rf_tlv_config]
-rf_config = 0xAA,0x55,0x00,0xFF,0x8,0xA,0x0,0x5,0x0,0x0,0x0,0x0,0x0,0x0
-
--- a/recipes-kernel/uwe5622-firmware/uwe5622-firmware.bb
+++ b/recipes-kernel/uwe5622-firmware/uwe5622-firmware.bb
@ -1,22 +0,0 @@
-DESCRIPTION = "UWE5622 Wifi firmware"
-LICENSE = "CC0-1.0"
-LIC_FILES_CHKSUM = "file://${COMMON_LICENSE_DIR}/${LICENSE};md5=0ceb3372c9595f0a8067e55da801e4a1"
-
-S = "${WORKDIR}"
-
-COMPATIBLE_MACHINE = "orange-pi-zero2"
-
-SRC_URI:append = " \
-        file://wcnmodem.bin \
-        file://wifi_2355b001_1ant.ini \
-"
-
-do_install() {
-    install -d ${D}${base_libdir}/firmware
-    install -m 0644 ${S}/wcnmodem.bin ${D}${base_libdir}/firmware/wcnmodem.bin
-    install -m 0644 ${S}/wifi_2355b001_1ant.ini ${D}${base_libdir}/firmware/wifi_2355b001_1ant.ini
-}
-
-FILES:${PN} = "${base_libdir}/*"
-
-PACKAGES = "${PN}"
--- a/recipes-kernel/xradio-firmware/xradio-firmware.bb
+++ b/recipes-kernel/xradio-firmware/xradio-firmware.bb
@ -20,6 +20,6 @@ do_install() {
    install -m 0644 ${S}/xr819/fw_xr819.bin ${D}${base_libdir}/firmware/xr819/
 }

-FILES:${PN} = "${base_libdir}/*"
+FILES_${PN} = "${base_libdir}/*"

 PACKAGES = "${PN}"
--- a/recipes-kernel/xradio/xradio.bb
+++ b/recipes-kernel/xradio/xradio.bb
@ -1,5 +1,5 @@
 SUMMARY = "Xradio WiFi driver for orangepi-zero"
-LICENSE = "GPL-2.0-only"
+LICENSE = "GPLv2"
 LIC_FILES_CHKSUM = "file://LICENSE;md5=a23a74b3f4caf9616230789d94217acb"

 inherit module
@ -7,7 +7,7 @@ inherit module
 PV = "0.1"
 PR = "r0"

-RDEPENDS:${PN} += "xradio-firmware"
+RDEPENDS_${PN} += "xradio-firmware"

 COMPATIBLE_MACHINE = "orange-pi-zero"

--- a/recipes-multimedia/gstreamer/gst-plugin-cedar_git.bb
+++ b/recipes-multimedia/gstreamer/gst-plugin-cedar_git.bb
@ -1,6 +1,6 @@
 SUMMARY = "CedarX Hardware Encoding GStreamer plug-in"
 SECTION = "multimedia"
-LICENSE = "GPL-2.0-only"
+LICENSE = "GPLv2"
 LIC_FILES_CHKSUM = "file://COPYING;md5=b234ee4d69f5fce4486a80fdaf4a4263"
 HOMEPAGE = "http://github.com/ebutera/gst-plugin-cedar"
 DEPENDS = "gstreamer gst-plugins-base"
@ -10,14 +10,14 @@ inherit autotools pkgconfig
 # 0.10.1 Initial Import
 SRCREV = "908987a74d341be1376895023698667892fe5569"

-SRC_URI = "git://github.com/ebutera/gst-plugin-cedar.git;protocol=https;branch=master"
+SRC_URI = "git://github.com/ebutera/gst-plugin-cedar.git"

 PV = "0.10.1+git${SRCPV}"
 PR = "r1"

 S = "${WORKDIR}/git"

-FILES:${PN} += "${libdir}/gstreamer-0.10/*.so"
-FILES:${PN}-dbg += "${libdir}/gstreamer-0.10/.debug"
-FILES:${PN}-dev += "${libdir}/gstreamer-0.10/*.la"
-FILES:${PN}-staticdev += "${libdir}/gstreamer-0.10/*.a"
+FILES_${PN} += "${libdir}/gstreamer-0.10/*.so"
+FILES_${PN}-dbg += "${libdir}/gstreamer-0.10/.debug"
+FILES_${PN}-dev += "${libdir}/gstreamer-0.10/*.la"
+FILES_${PN}-staticdev += "${libdir}/gstreamer-0.10/*.a"
--- a/recipes-support/sunxi-tools/sunxi-tools_git.bb
+++ b/recipes-support/sunxi-tools/sunxi-tools_git.bb
@ -1,13 +1,13 @@
 DESCRIPTION = "Tools to help hacking Allwinner A10 and A20"

-LICENSE = "GPL-2.0-only"
+LICENSE = "GPLv2+"
 LIC_FILES_CHKSUM = "file://LICENSE.md;md5=97bd67b5d0309e452b637f76e1c9a23c"

 PR = "r0"

 DEPENDS += "libusb"

-SRC_URI = "git://github.com/linux-sunxi/sunxi-tools;protocol=https;branch=master"
+SRC_URI = "git://github.com/linux-sunxi/sunxi-tools;protocol=git"
 SRCREV = "9a3d62aa0c820b3dd42ba3409b2043f4143683cd"

 inherit pkgconfig
@ -16,7 +16,7 @@ S = "${WORKDIR}/git"

 BBCLASSEXTEND = "native nativesdk"

-FILES:${PN} = "${bindir}/*"
+FILES_${PN} = "${bindir}/*"

 CFLAGS = "-std=c99 -D_POSIX_C_SOURCE=200112L -I./include"
 CFLAGS_class-native = "-std=c99 -D_POSIX_C_SOURCE=200112L -I./include"
Author	SHA1	Message	Date
Marek Belisko	612de90a00	Merge remote-tracking branch 'origin/master' into hardknott	2021-09-20 09:25:30 +02:00
Marius Kriegerowski	7fa2dc3314	default to 'boot' as boot partition label Defaulting to the $MACHINE may lead to failure if the name was longer than the limit of allowed volume label of fat (11 chars). Signed-off-by: Marius Kriegerowski <marius.kriegerowski@gmail.com>	2021-05-17 13:30:02 +02:00
				`@ -1 +0,0 @@`
				`PACKAGECONFIG:class-target = "opengl x11 gallium"`