setting all transparent pixels to black rather than the "flatten" method.
0.3% smaller filesize on the 1000 PNGs if alpha cleanup is used (before: 18685774, after: 18622472)
Change-Id: Ib0db9e7ccde55b36e82de07855f2dbb630fe62b1
The functions containing magic constants are moved out of ./dsp .
VP8LPopulationCost got put back in ./enc
VP8LGetCombinedEntropy is now unrefined (refinement happening in ./enc)
VP8LBitsEntropy is now unrefined (refinement happening in ./enc)
VP8LHistogramEstimateBits got put back in ./enc
VP8LHistogramEstimateBitsBulk got deleted.
Change-Id: I09c4101eebbc6f174403157026fe4a23a5316beb
This implementation brings:
- an SSE implementation of packing / unpacking
- bigger buffers processed at the same time
The speedup is of 4% on lossy decoding (YUV to RGB), 0.5% on
lossy encoding (RGB to YUV was already optimized).
Change-Id: Iec677ee17f91c08614d1adab67c6df551925767f
* changes:
demux: remove GetFragment()
demux: remove dead fragment related TODO
demux, Frame: remove is_fragment_ field
demux,WebPIterator: remove fragment_num/num_fragments
demux: remove WebPDemuxSelectFragment
this hasn't been set since parsing of the experimental chunk was
removed.
+ cleanup IsValidExtendedFormat(). is_fragmented has caused immediate
failure since:
4e2589f demux: restore strict fragment flag check
Change-Id: If9ecfc19556297100a6d5de1ba2cffdcbdc6c8fd
INFO: From Compiling src/dsp/cpu.c:
src/dsp/cpu.c: In function 'x86CPUInfo':
src/dsp/cpu.c:36:3: inconsistent operand constraints in an 'asm'
With PIC and mcmodel=medium, the %rbx register must be saved and
restored which causes this problem. This was also solved in GCC-4.9 with
this patch:
https://gcc.gnu.org/ml/gcc-patches/2012-12/msg01484.html
Tested:
Builds fine with this change.
Change-Id: Icca8eea7bf5af3ef9f17f6ae2886e3430143febf
CombinedShannonEntropy takes 30% for lossless compression.
This implementation speeds up the overall process by 2 to 3 %.
Change-Id: I04a71743284c38814fd0726034d51a02b1b6ba8f
The previous priority system used a heap which was too heavy to
maintain (what was gained from insertions / deletions was lost
due to a linear that still happened on the heap for invalidation).
The new structure is a priority queue where only the head is
ordered.
Change-Id: Id13f8694885a934fe2b2f115f8f84ada061b9016
SimpleQuantize()
it's now a single function, that reconstructs the intra4x4 block during the scan
The I4_PENALTY had to be adjusted.
Overall, result is better quality-wise (esp. at q < 50), and a tad faster too.
method #0, #1 and #3+ are unchanged
Change-Id: If262aeb552397860b3dd532df8df6b1357779222
* Precision is slightly different
* also implemented in SSE2 the missing WebPUpsamplers for MODE_ARGB, MODE_Argb, MODE_RGB565, etc.
* removing yuv_tables_sse2.h saved ~8k of binary size
* the mips32/mips_dsp_r2 code is disabled for now, since it has drifted away
* the NEON code is somewhat tricky
Change-Id: Icf205faa62cf46c2825d79f3af6725dc1ec7f052
Gives 0.9% smaller (2.4% compared to before alpha cleanup) size on the 1000 PNGs dataset:
Alpha cleanup before: 18856614
Alpha cleanup after: 18685802
For reference, with no alpha cleanup: 19159992
Note: WebPCleanupTransparentArea is still also called in WebPEncode. This cleanup still helps
preprocessing in the encoder, and the cases when the prediction transform is not used.
Change-Id: I63e69f48af6ddeb9804e2e603c59dde2718c6c28
The 32-bit buffers are actually rarely 64-bit aligned.
The new solution uses memcmp and is alignment agnostic.
It is also slightly faster.
Change-Id: I863003e9ee4ee8a3eed25b7b2478cb82a0ddbb20
for more speed.
This gives a roughly a 1% speedup for low_effort. But actually this is a
preparation for the upcoming CL that changes RGB values of transparent pixels
based on prediction, which should not be done for low_effort because that would
slightly hurt its performance.
On 1000 PNGs, with quality 0, method 0:
Before:
Compression (output/input): 2.9120/3.2667 bpp, Encode rate (raw data): 36.034 MP/s
After:
Compression (output/input): 2.9120/3.2667 bpp, Encode rate (raw data): 36.428 MP/s
Change-Id: I5ed9f599bbf908a917723f3c780551ceb7fd724d
Arrays were compared 32 bits at a time, it is now done 64 bits at a time.
Overall encoding speed-up is only of 0.2% on @skal's small PNG corpus.
It is of 3% on my initial 1.3 Mp desktop screenshot image.
Change-Id: I1acb32b437397a7bf3dcffbecbcd4b06d29c05e1
The same computation was done for both values: go over two buffers,
sum them up, and take a decision on the sum at each iteration.
MIPS32 code has been disabled for now, pending a code update.
Change-Id: I997984326f7092b3dbb8cfa1e524bd8132b2ab9d
instead of per block. This prepares for a next CL that can make the
predictors alter RGB value behind transparent pixels for denser
encoding. Some predictors depend on the top-right pixel, and it must
have been already processed to know its new RGB value, so requires per
scanline instead of per block.
Running the encode speed test on 1000 PNGs 10 times with default
settings:
Before:
Compression (output/input): 2.3745/3.2667 bpp, Encode rate (raw data): 1.497 MP/s
After:
Compression (output/input): 2.3745/3.2667 bpp, Encode rate (raw data): 1.501 MP/s
Same but with quality 0, method 0 and 30 iterations:
Before:
Compression (output/input): 2.9120/3.2667 bpp, Encode rate (raw data): 36.379 MP/s
After:
Compression (output/input): 2.9120/3.2667 bpp, Encode rate (raw data): 36.462 MP/s
No effect on compressed size, this produces exactly same files. No
significant measured effect on speed. Expected faster speed from better
memory layout with scanline processing but slower speed due to needing
to get predictor mode per pixel, may compensate each other.
Change-Id: I40f766f1c1c19f87b62c1e2a1c4cd7627a2c3334
the problem was the incorporation of the extra constant 1<<16 in the kC1
constant, to emulate the addition. It's now removed and the addition is
performed explicitly.
No real speed difference observed.
cf. issue #278
Change-Id: I2c6499031571d98afff392fb5ebe21a5fa60722d
* changes:
Makefile.vc: enable WEBP_USE_THREAD for windows phone
thread: use CreateThread for windows phone
thread: use WaitForSingleObjectEx if available
thread: use InitializeCriticalSectionEx if available
thread: use native windows cond var if available
