This reverts commit 169004b1d5.
this changes the ABI, so should bump versions and add a note to NEWS
when we're ready to expose it
Change-Id: Ic5bbd0aee2b6fd0f9d438a9effedf22fe0cec4bf
tl;dr
We do the following:
- Start with transparent value of 0x00000000 instead of 0x00ffffff, so that
WebPCleanupTransparentAreaLossless() is a no-op.
- Restore the original canvas after lossy encoding, to discard changes made by
WebPCleanupTransparentArea() before the next encode.
Explanation of why:
In the mixed mode, anim_encoder tries to encode using both lossless and lossy
compression. In fact, when "min_size" option is enabled, there are at most 4
encodes that can happen in this order:
- lossless with dispose none
- lossy with dispose none
- lossless with dispose background
- lossy with dispose background
But both lossless and lossy both potentially modify the canvas during encode
(for better compression):
- Lossless: WebPCleanupTransparentAreaLossless() turns all transparent pixels
to 0x00000000
- Lossy: WebPCleanupTransparentArea() flattens some transparent pixels
So, the result is that, sometimes we feed the modified canvas to the encoder
instead of the original one, which isn't the right thing to do.
This also applies to just lossless or just lossy encoding, as multiple encodes
happen (with the two dispose methods) in those cases too.
Change-Id: Idfa8ce831a1627014785ba7d0316c42f72594455
This was defined (slightly differently) at two places. Created a common
method and moved to utils/utils.[hc].
Change-Id: I19adc9c48f2a4e2ec9d995e78add6f25172774c2
no longer gate this on WEBP_FORCE_ALIGNED as WebPMemToUint32() provides
this service. replace that check with WORDS_BIGENDIAN as the block is
currently little-endian specific.
Change-Id: Ie04ec0179022d20dab53da878008ae049837782f
the read size may be fixed, but the offsets into buf_ are not. forcing
an aligned read then shifting or using a temporary would be costly. this
is less important now that WebPMemToUint32() is being used.
Change-Id: I357fec8f750969cce91987abebed2f95e27a835f
Instead of comparing all the following pixels over len (which can
frequently reach the maximum MAX_LENGTH=4096 for some images),
intervals are stored and compared.
Change-Id: I0dafef6cc988dde3c1c03ae07305ac48901d60ee
The old implementation in enc/near_lossless.c performing a separate
preprocessing step is used only when a prediction filter is not used,
otherwise a new implementation integrated into lossless_enc.c is used.
It retains the same logic for converting near lossless quality into max
number of bits dropped, and for adjusting the number of bits based on
the smoothness of the image at a given pixel. As before, borders are not
changed.
Then, instead of quantizing raw component values, the residual after
subtract green and after prediction is quantized according to the
resulting number of bits, taking care to not cross the boundary between
255 and 0 after decoding. Ties are resolved by moving closer to the
prediction instead of by bankers’ rounding.
This results in about 15% size decrease for the same quality.
Change-Id: If3e9c388158c2e3e75ef88876703f40b932f671f
copy and paste error in the previous commit, change
no_sanitize("unsigned-integer-overflow") from WEBP_UBSAN_IGNORE_UNDEF ->
WEBP_UBSAN_IGNORE_UNSIGNED_OVERFLOW
Change-Id: Id178ee14df1f2c4923a91ce423241e26b60b5d32
add WEBP_UBSAN_IGNORE_UNDEF to WebPMemToUint32() / WebPUint32ToMem()
when WEBP_FORCE_ALIGNED is unset
Change-Id: I726b2e708ce29681584eb10c8874d5cf1e798756
include utils.h directly where needed to allow utils.h to rely on
defines from dsp.h in a follow-up.
Change-Id: I32e26aaeb0b04ba60b3332f685f9a2be5a0a8d3d
configure gets 2 new options:
--enable-neon / --enable-neon-rtcd
the NEON modules are split to their own convenience lib and built with
auto-detected flags if none are given via CFLAGS.
the /proc/cpuinfo check will only be used for armv7 targets whose
toolchain does not enable NEON by default or didn't have NEON forced by
the CFLAGS from the environment.
Change-Id: I2755bc1d065d5d6ee6143b44978c2082f8bef1c5
This fixes decoders built against clang-3.8 (r11c). Without this change
bad conditional code would be generated causing all calls to
WebPParseHeaders() to return 4 (UNSUPPORTED_FEATURE).
Original fix:
https://android-review.googlesource.com/#/c/196123
Change-Id: Id4b4d84048d347cea110b6cf297ef9ef4fbed323
TEST_AND_ADD_CFLAGS tests flags independently from AM_CFLAGS. The lack
of -Wformat may cause -Wformat-* checks to fail (gcc 4.9), though in the
end they would have succeeded with -Wall present.
Change-Id: Ic8f0d5b8a3f75a0b105bdc4ddd16690878a30222
the number of segments are previously validated, but an explicit check
is needed to avoid a warning under gcc-4.9
this is similar to the changes made in:
c8a87bb AssignSegments: quiet -Warray-bounds warning
3e7f34a AssignSegments: quiet array-bounds warning
Change-Id: Iec7d470be424390c66f769a19576021d0cd9a2fd
This will allow to work in-place on cropped area later.
Also sped up the inverse gradient filtering in SSE2 (~4%)
Change-Id: I463149eee95d36984328f163a1e17f8cabd87441
This is only possible if the filtering is not VERTICAL or GRADIENT.
Otherwise, we need the spatial predictors and hence need the un-visible
part above crop_top row.
COLOR_INDEX transform is the only transform that is not predicted
from previous row. Applying the same for other transform (spatial
predict, ...) is going to be more involve and use an extra temporary row.
+ remove ApplyInverseTransformsAlpha()
(work is done directly within ExtractPalettedAlphaRows())
+ change back to using filter_ instead of unfilter_func_
Change-Id: I09e57efae4a4af00bde35f21ca6e3d73b35d7d43
After the introduction of lossy frame rectangles
we need equivalent option in anim_diff for merging similar frames.
Change-Id: I1d03acace396ec4cb0212586c6e8b8ec5b0b0bfc
not exactly same.
Based on lossy WebP quality setting, ignore minor differences when
flattening
similar blocks.
For 6k set, at default quality with '-min_size' option, improves
compression by 0.3%
Change-Id: Ifcb64219f941e869eb2643e231220b278aad4cd4
there's some subtle changes:
- DecodeAlphaData() may be called with pos==end because we don't want
to decode more data (there's none left), but because we want to apply
process_func() to all the unprocessed pixels already decoded
- last_row is exclusive and should be understood as 'up to last_row'. Can be misleading.
- VP8LDecodeAlphaImageStream() was testing dec->last_pixel_ for completion,
which was wrong because last_pixel_ is the last *decoded* pixel, not the
last *processed* one. -> test now uses last_row_, as expected
Change-Id: I1fb04ba25cd7a4775db9e3deee3e2ae80f9c0a75
this might change some crc slightly, since WebPDequantizeLevels()
performs an analysis pass, counting levels, which impacts the smoothing.
Now, the cropping area is not the same, so minor diffs are expected here
and there.
Change-Id: I3cce1e40c6f11c25b7c841044d637685c5740352
* make ALPHNew/Delete static
* properly init ALPHDec::io_
* introduce AllocateAlphaPlane() and WebPDeallocateAlphaMemory()
* reorganize VP8DecompressAlphaRows()
but we're still allocate the full alpha-plane. Optim will come
in another patch since it's tricky
Change-Id: Ib6f190a40abb7926a71535b0ed67c39d0974e06a
this change will be superseded by patch #335160 eventually, but until then
let's fix the problem temporarily.
Change-Id: Iafd979c2ff6801e3f1de4614870ca854a4747b04
