(We didn't need the exact value of the max_error properly.
We can work with relative values instead of absolute)
Output is bitwise the same as before.
Change-Id: I67aeaaea5f81bfd9ca8e1158387a5083a2b6c649
Refactor code for HistogramCombine and optimize the code by calculating
the combined entropy and avoid un-necessary Histogram merges.
This speeds up lossless encoding by 1-2% and almost no impact on compression
density.
Change-Id: Iedfcf4c1f3e88077bc77fc7b8c780c4cd5d6362b
mostly by:
- storing a single rd-score instead of cost / distortion separately
- evaluating terminal cost only once
- getting some invariants out of the loops
- more consts behind fewer variables
Change-Id: I79451f3fd1143d6537200fb8b90d0ba252809f8c
incorporate non-last cost in per-level cost table
also: correct trellis-quant cost evaluation at nodes
(output a little bit different now). Method 6 is ~4% faster.
Change-Id: Ic48bd6d33f9193838216e7dc3a9f9c5508a1fbe8
Speedup lossless encoder by 20-25% by optimizing:
- GetBestColorTransformForTile: Use techniques like binary search and
local minima search to reduce the search space.
- VP8LFastSLog2Slow & VP8LFastLog2Slow: Adding the correction factor for
log(1 + x) and increase the threshold for calling the approximate
version of log_2 (compared to costly call to log()).
Change-Id: Ia2444c914521ac298492aafa458e617028fc2f9d
converts 2 s16 vectors to 2 u8 and store to uint8_t destination;
TransformAC3 can reuse this after a rework
Change-Id: Ia9370283ee3d9bfbc8c008fa883412100ff483d0
Separate the C version from the MIPS32 version and have run-time
initialization during RescalerInit()
Change-Id: I93cfa5691c073a099fe62eda1333ad2bb749915b
Increase the initial buffer size for VP8L Bit Writer from 4bpp to 8bpp.
The resize buffer is expensive (requires realloc and copy) and this additional
memory (0.5 * W * H) doesn't add much overhead on the lossless encoder.
Change-Id: Ic1fe55cd7bc3d1afadc799e4c2c8786ec848ee66
Optimize 'VP8LCalculateEstimateForCacheSize' for lower quality ranges (Q < 50).
The entropy is generally lower for higher cache_bits, so start searching from
higher cache_bits and settle for a local minima, instead of evaluating all
values.
This speeds up the lossless encoding at lower qualities by 10-15%.
Change-Id: I33c1e958515a2549f2e6f64b1aab3f128660dcec
* simplify the endian logic
* remove the need for memset()
* write 16 or 32 at a time (likely aligned)
Makes the code a bit faster on ARM (~1%)
Change-Id: I650bc5654e8d0b0454318b7a78206b301c5f6c2c
-> remove the 'color_transform' multiplier, use more constants, etc.
This function is particularly critical, mostly because of
GetBestColorTransformForTile().
Loop is a bit faster (maybe ~1%)
Change-Id: I90c96a3437cafb184773acef55c77e40c224388f
The WEBP_SWAP_16BIT_CSP flag needs to be honored while filling the Alpha (4 bits)
data in the destination buffer and while pre-multiplying the alpha to RGB colors.
Change-Id: I3b07307d60963db8d09c3b078888a839cefb35ba
(instead of per-macroblock)
speed unchanged.
simplified the context-saving for incremental decoding
Change-Id: I301be581bab581ff68de14c4ffe5bc0ec63f34be
VP8GetThreadMethod() may be called with a NULL headers param; correct an
assert.
broken since:
8a2fa09 Add a second multi-thread method
Change-Id: If7b6d1b8f4ec874d343a806cee5f5e6bb6438620
This makes the segmentation overall less prone to
local-optimum or boundary effect.
(and overall, encoding is a little faster)
Change-Id: I35688098b0f43c28b5cb81c4a92e1575bb0eddb9
The registers and instructions are quite different to 32bit
and the assembly code needs a rewrite.
more info: http://people.linaro.org/~rikuvoipio/aarch64-talk/
Change-Id: Id75dbc1b7bf47f43a426ba2831f25bb8fa252c4f
the -alpha_cleanup flag was ineffective since we switched cwebp
to using ARGB input always.
Original idea by David Eckel (dvdckl at gmail dot com)
Change-Id: I0917a8b91ce15a43199728ff4ee2a163be443bab
New API options: WebPDecoderOptions.flip and 'dwebp -flip ...'
it uses negative stride trick.
Also changed the decoder code to support user-supplied
buffers with negative stride, independently of the
WebPDecoderOptions.flip value.
Change-Id: I4dc0d06f0c87e51a3f3428be4fee2d6b5ad76053
this partially reverts
f626fe2 Detect canvas and image size mismatch in decoder.
the original change would cause calls to e.g., WebPGetInfo to fail until
a portion of the image chunk was available. With lossy+alpha this meant
waiting for the entire ALPH chunk to be received.
this change restores the original behavior -- reporting the values from
VP8X if available -- while retaining some of the added canvas/image size
checks if the image data is available
Change-Id: I6295b00a2e2d0d4d8847371756af347e4a80bc0e
add TransformDC special case, and make the switch function inlined.
Recovers a few of the CPU lost during the addition of TransformAC3
(only on ARM)
Change-Id: I21c1f0c6a9cb9d1dfc1e307b4f473a2791273bd6
the *quantized* level should be clipped to 2047, not the
original coeff.
(similar problem was fixed in the regular quantize function
quite some time ago)
Change-Id: I2fd2f8d94561ff0204e60535321ab41a565e8f85
WHT is somewhat a special case: no sharpen[] bias, etc.
Will be useful in a later CL when precision of input is changed.
Change-Id: I851b06deb94abdfc1ef00acafb8aa731801b4299
This is in preparation for a future change where input will
be 16bit instead of 12bit
No speed diff observed.
Note that the NEON implementation was using 32bit calc already.
Change-Id: If06935db5c56a77fc9cefcb2dec617483f5f62b4
* remove the sharpening for non luma-AC coeffs
* adjust the bias a little bit to compensate for this
Using the multiply-by-reciprocal doesn't always give the same result
as the exact divide, given the QFIX fixed-point precision we use.
-> removed few now-unneeded SSE2 instructions (and checked for
bit-exactness using -noasm)
Change-Id: Ib68057cbdd69c4e589af56a01a8e7085db762c24
Even at high quality setting, the U/V quantizer step is limited
to 4 which can lead to banding on gradient.
This option allows to selectively apply some randomness to
potentially flattened-out U/V blocks and attenuate the banding.
This option is off by default in 'dwebp', but set to -dither 50
by default in 'vwebp'.
Note: depending on the number of blocks selectively dithered,
we can have up to a 10% slow-down in decoding speed it seems.
Change-Id: Icc2446007f33ddacb60b3a80a9e63f2d5ad162de
RGBToU/V calls expects two extra precision bits, they were only
given one by SUM2H and SUM2H macros.
For rounding coherency, also changed SUM1 macro.
Change-Id: I05f96a46f5d4f17b830d0420eaf79b066cdf78d4
otherwise make sure that all frames are marked as a fragment. there's
still some work to do with validation if fragments are expected to cover
the entire canvas.
Change-Id: Id59e95ac01b9340ba8c6039b0c3b65484b91c42f
this avoids local-minima that look bad, even if the distortion
looks low (e.g. gradients, sky,...). Mostly visible in the q=50-80 range.
Output size is mostly unchanged.
Change-Id: I425b600ec45420db409911367cda375870bc2c63
Earlier we were only testing for bit_pos == LBITS. But this is not
sufficient,
as bit_pos can jump from < LBITS to > LBITS.
This was resulting in some bit-stream truncation errors not being
caught.
Note: Not a security bug though, as br->pos wasn't incremented in such
cases
and so we weren't reading beyond the buffer.
Change-Id: Idadcdcbc6a5713f8fac3470f907fa37a63074836
* raise U/V quantization bias to more neutral values
* also raise the non-zero AC bias for Y1/Y2 matrices
(we need all the precision we can for U/V leves, which are often empty)
This will increase quality in the higher range (q >= 90) mostly.
Files size is exacted to raise a little (5-7%). and SSIM accordingly of course.
Change-Id: I8a9ffdb6d8fb6dadb959e3fd392e66dc5aaed64e
kLevelsFromDelta[sharpness][delta] is an inverse look-up table
that tells the minimum filtering strength needed to trigger the
filtering of a step with amplitude 'delta'. We use this table
in various situations:
a) when computing the initial (/global) filtering
strength for each segment. We look at the quantization
step and deduce the proper filtering strength needed
to result this quantization noise (talking the -f option
into account).
b) during intra16 calculation, when a block ends up
very empty (only DC coeffs are non-zero, all ACs have
vanished). We'll rely on the in-loop filtering to
restore the smoothness (if the source was gradient-like
smooth. That's why we look at the distortion too before
triggering the filtering).
Step b) goes _in addition_ to a), potentially raising
the filtering strength if blockiness is likely.
Change-Id: Icaeca93ef21da195b079e6587a44d9edfc8e9efa
Earlier "f = f->next_" was executing for both inner and outer loop, thus
skipping validation of some frames.
Change-Id: Ice5cdb4ff5da78384aa0573addd3a5e5efa0b10c
-> helps debanding (sky, gradients, etc.)
This dithering can only be triggered when using -preset photo
or -pre 2 (as a preprocessing). Everything is unchanged otherwise.
Note that this change is likely to make the perceived PSNR/SSIM drop
since we're altering the input internally.
Change-Id: Id8d4326245d9b828141de162c94ba381b1fa5813
method 1 grouping: [parse + reconstruction] // [filtering + output]
method 2 grouping: [parse] // [reconstruction+filtering + output]
Depending on some heuristics (see VP8ThreadMethod()), we
can pick one of the other when -mt flag (or option.use_threads)
is selected.
Conservatively, we always use method #2 for now until the heuristic
is refined (so, timing should be the same the before this patch)
+ replace 'use_threads' by 'mt_method'
+ define MIN_WIDTH_FOR_THREADS constant
+ fix comment alignment
Change-Id: I11a756dea9070d6e21b1a9481d357a1e8aa0663e
Mostly visible for large images.
Reconstruction+filtering is now done in parallel to bitstream-parsing.
Change-Id: I4cc4483d803b255f4d97a2fcd9158b1c291dd900
Needs more memory but allows for future parallelization.
Noticeably faster on ARM, slightly faster on x86
also: remove dec->filter_row_ unnecessary field
Change-Id: I044a808839b4e000c838a477e3e8688820436d9a
happens surprisingly often at low quality, so we might
as well hard-code a simplified TransformWHT() directly.
Change-Id: Ib7a858ef74e8f334bd59d6512bf5bd3e455c5459
happens when decoding is partial (past Partition0), without error and
interrupted by calling WebPIDelete()
WebPIDelete() needs to call VP8ExitCritical() to free in-flight resources
Change-Id: Id4faef1b92f7edd8c17d642c58860e70dd570506
"src\enc\frame.c(88) : warning C4244: '=' : conversion from 'const double' to 'float', possible loss of data"
Change-Id: I143cb0bb6b69e1b8befe9b4f24b71adbc28095c2
The convergence algo is noticeably faster and more accurate.
Try it with: 'cwebp -size xxxxx -pass 8 ...' or 'cwebp -psnr 39 -pass 8 ...'
for instance
Allow full-looping with TokenBuffer case, and make the non-TokenBuffer
case match too.
In case Partition0 is likely to overflow, retry encoding with harder
limits on max_i4_header_bits_.
This CL should make -partition_limit option somewhat useless,
since the fix made automatically (albeit in a non-optimal way yet).
Change-Id: I46fde3564188b13b89d4cb69f847a5f24b8c735b
* fix VP8FixedCostsI4ÆÅ table
(the constant cost '211' was erronenously included)
* use the rd-score for '211' correctly (calling SetRDScore() for good)
* count partition0 bits separately during rd-opt
No meaningful difference in rd-curve.
Change-Id: I6c49a150cf28928d9a92c32fff097600d7145ca4
