Doesn't work with WIC
+ redirect some info messages from stdout to stderr
+ fix the error reporting upon output-writing error
Change-Id: I92b8bd7a15e656a3f3cdfbf56299f024e39453f8
new option: -blend_alpha 0xrrggbb
also: don't force picture.use_argb value for lossless. Instead,
delay the YUVA<->ARGB conversion till WebPEncode() is called.
This make the blending more accurate when source is ARGB
and lossy compression is used (YUVA).
This has an effect on cropping/rescaling. E.g. for PNG, these
are now done in ARGB colorspace instead of YUV when lossy compression
is used.
Change-Id: I18571f1b1179881737a8dbd23ad0aa8cddae3c6b
using token-buffer (that is: slightly more memory. O(output_size))
This change is ON by default. To return to previous behaviour, use
'cwebp -low_memory' or set config.low_memory to true.
Side-effect of this new mode: it forces 1 partition only (which was
default anyway), and makes some statistics about the bitstream
no longer available. cwebp will no longer report 'intra4-coeffs', etc.
This mode also doesn't work (yet) with multi-pass, and -low_memory
is currently forced for multi-pass.
also: reversed the flag: USE_TOKEN_BUFFER -> DISABLE_TOKEN_BUFFER
also: fixed the kAverageBytesPerMB estimate
Change-Id: I4ea80382038d6df4309663e0cb7bd88d9bca9cf1
new option: 'cwebp -mt ...'
new config flag: config.thread_level
(allowed thread_level are 0 or 1 for now. Maybe more later...)
If -mt is activated (and WEBP_USE_THREAD is used for compile), the alpha-compression
will be done in parallel to RGB coding for lossy. Can save quite a bit of latency...
Has no effect for lossless encoding.
Change-Id: I769d0bf90e7380cf99344ad62cd77277f4df5a46
This option remaps internal parameters to better match
the expected compression curve of JPEG and produce output files
of similar size, but with better quality.
Change-Id: I96a1cbb480b1f6a0c6845a23c33dfd63f197b689
It will decode to raw (flat) YUV format, similar to what
cwebp can take as input. Makes the PSNR/SSIM calculation easier.
Change-Id: Iebfaedfc0bedc70c169b24ae4aabc701488d0644
currently has no effect except to disable metadata extraction from the
input when the value is 'none'.
Change-Id: Ic50d4c9d634cc1f6b72ae4e130e99736c85a6477
Now, its: +duration+xoffset+yoffset+disposal
+disposal can be omitted and will default to +0 (NONE)
additionally, +xoffset+yoffset can be omitted and will default to +0+0
Change-Id: I62138c9f675d4fc4408305babbcd485cb32b73d3
- Allow a duration of 0
- Rename LOOP chunk to ANIM and add the background color field to it.
- Add a disposal method field for each animation frame.
- Modify webpmux.c binary interface to allow the input of background color
and disposal methods. Also make '-loop' and '-bgcolor' arguments optional
with some default values.
Change-Id: I807372a61cdb8a0d3080ae3552caf2848070bf4d
- Also, use the term 'fragments' instead of 'tiling' in code
- This makes code consistent with the spec.
Change-Id: Ibeccffc35db23bbedb88cc5e18e29e51621931f8
Use separate fourCCs "XMP " and "EXIF" instead of a common "META"
Also, some refactorization in webpmux.c
Change-Id: Iad3337e5c1b81e785c60670ce28b1f536dd7ee31
LSIM stands for "local similarity": before matching
a compressed pixel to the source, we search around in the source
and minimise the squared error. So, this is close to PSNR calculation,
but mitigates some of its limitations (pure translation and noise for instance).
There's a new -print_lsim option to cwebp too.
Change-Id: Ia38561034c7a90e71d2ea0f55bb1de527eda245b
For low-color images, it may be better to not use color-palettes.
Users should treat this as one another hint (as with Photo &
Picture) and another parameter for tuning the compression density.
The optimum compression can still be obtained by running (outer loop)
compression with all possible tunable parameters.
Change-Id: Icb1a4face2a84774e16e801aee4a8ae97e232e8a
retains the alpha channel rather than stripping it as with PPM.
display from ImageMagick can render the files
Change-Id: I4f3a5d332937e0aeaf4e3fbd214fdae3b5382fb8
the extended file format is still under development and related
libs/binaries are not fit for release
configure:
--enable/disable-libwebpmux; default is disabled.
makefile.unix:
src/mux/libwebpmux.a and examples/webpmux must be explicitly specified
Makefile.vc:
$(DIRLIB)\libwebpmux.lib and $(DIRBIN)\webpmux.exe must be explicitly
specified
Change-Id: I8246746b256010dd2a2e4de58291222d7eaf0457
- send errors to stderr
- send help to stdout
- add image size to webpmux -info output and send to stdout
- correct webpmux exit values
Change-Id: Ifd8e8493aab33a82765f7b7903cef345d96da9ae
These will report the 7x7-averaged PSNR or SSIM, using the
new internal function WebPPictureDistortion().
This is for information only. These flags have no encoding impact.
+misc opportunistic cosmetics
Change-Id: I64c0a7eca679134d39062e438886274b22bb643f
to 'clean up' the fully-transparent area and make it more compressible
new cwebp flags: -alpha_cleanup (off by default, since gain is not 100% guaranteed)
Change-Id: I74d77e1915eee146584cd61c9c1132a41db922eb
.. where only 2 filtering modes are potentially
tried, instead of all of them. This is fast than the exhaustive 'best'
mode, and not much worse.
Options for cwebp are:
-alpha_filter none
-alpha_filter fast (<- default)
-alpha_filter best (<- slow)
Change-Id: I8cb90ee11b8f981811e013ea4ad5bf72ba3ea7d4
Add predictive filtering option for Alpha plane.
Valid range for filter option is [0, 5] corresponding to prediction
methods none, horizontal, vertical, gradient & paeth filter.
The prediction method 5 will try all the prediction methods (0 to 4)
and pick the prediction method that gives best compression.
Change-Id: I9244d4a9c5017501a9696c7cec5045f04c16d49b
Updated cwebp (Webp Encoder) binary to support Alpha encoding.
Modified man page and WebP container spec appropriately.
Change-Id: I52f6a5cb3e870c386591e9a7776293fa6a8fb04b
escape '-'s
use consistent section names
webpmux.1:
document -loop
create subsections for each OPTION group
Change-Id: If41dc24d80e4a662024e82697d8d2cc4e194a35d
Although it degrades quality, this option is useful to avoid the 512k
limit for partition #0.
If not enough to reach the lower bound of 4bits per macroblock header,
one should also limit the number of segments used (down to -segments 1)
See the man file for extra details.
Change-Id: Ia59ffac13176c85b809ddd6340d37b54ee9487ea
To be enabled with the flag WEBP_USE_THREAD.
For now it's only available on unix (pthread), when using Makefile.unix
Will be switched on more generally later.
In-loop filtering and output (=rescaling/yuv->rgb conversion)
is done in parallel to bitstream decoding, lagging 1 row behind.
Example:
examples/dwebp bryce.webp -v
Time to decode picture: 0.680s
examples/dwebp bryce.webp -v -mt
Time to decode picture: 0.515s
Change-Id: Ic30a897423137a3bdace9c4e30465ef758fe53f2
You can now use WebPDecBuffer, WebPBitstreamFeatures and WebPDecoderOptions
to have better control over the decoding process (and the speed/quality tradeoff).
WebPDecoderOptions allow to:
- turn fancy upsampler on/off
- turn in-loop filter on/off
- perform on-the-fly cropping
- perform on the-fly rescale
(and more to come. Not all features are implemented yet).
On-the-fly cropping and scaling allow to save quite some memory
(as the decoding operation will now scale with the output's size, not
the input's one). It saves some CPU too (since for instance,
in-loop filtering is partially turned off where it doesn't matter,
and some YUV->RGB conversion operations are ommitted too).
The scaler uses summed area, so is mainly meant to be used for
downscaling (like: for generating thumbnails or previews).
Incremental decoding works with these new options.
More doc to come soon.
dwebp is now using the new decoding interface, with the new flags:
-nofancy
-nofilter
-crop top left width height
-scale width height
Change-Id: I08baf2fa291941686f4ef70a9cc2e4137874e85e
For now, SSE2 functions are compiled a-minima: only on platforms
where __SSE2__ is defined. Let's later add some autoconf-based
config to enable/disable at will.
One can disable SSE2 at run-time by hooking-up VP8GetInfo.
There is a new option "-noasm" in cwebp for that.
Output should be binary the same between C and SSE2 version. If not,
that's a bug!
patch by Christian Duvivier (cduvivier at google dot com)
Change-Id: Iae006c3cdcb7e8280e846cedb94d239dab1e42ae
Makes things lighter at the expense of requiring the user
to be up-to-date for autotools.
patch by Jan Engelhardt (jengelh at medozas dot de)
Change-Id: Icfcab2d899828a213d9fade0dab350dacd0c070a
use top_srcdir rather than top_builddir for AM_CPPFLAGS
add EXTRA_DIST to man Makefile. fixes distcheck target.
Change-Id: I308dc1c98f096de1efe188f63d040ef953598e78
