this will avoid the "dec_neon.o has no symbol" warning
no change in binary size observed on linux.
Change-Id: Ifd83dfc6a0c61905481599b06cb5e711f55efa7d
lossy was rounding with a bias toward opaque:
[232+, 8] -> [15, 1]
now both paths use the range:
[240+, 16] -> [15, 1]
Change-Id: I3da2063b4959b9e9f45bae09e640acc1f43470c5
* green was not descaled properly
* alpha was over-dithered, making the value '0x0f' not be a fixed point
* alpha value was not restored ok.
Change-Id: Ia4a4d75bdad41257f7c07ef76a487065ac36fede
Fix the lossless decoder for the case when it has to apply other
inverse transforms before applying Color indexing inverse transform.
The main idea is to make ColorIndexingInverse virtually in-place: we
use the fact that the argb_cache is allocated to accommodate all
*unpacked* pixels of a macro-row, not just *packed* pixels.
Change-Id: I27f11f3043f863dfd753cc2580bc5b36376800c4
Order-by-cost mostly unchanged (up to a scaling constant 1/log(2))
(except for few minor diff in < 2% of cases)
+ remove unused field cost_mode->cache_bits_
Change-Id: I714f8ab12f49a23f5d499a64c741382c9b489a3e
Adds new methods WebPPictureARGBToYUVA() and WebPPictureYUVAToARGB()
Depending on the value of picture->use_argb_input,
the main call WebPEncode() will convert appropriately.
Note that both conversions are lossy, so it's recommended to:
* use YUVA input for lossy compression (picture->use_argb_input=0)
* use ARGB input for lossless compression (picture->use_argb_input=1)
Change-Id: I8269d607723ee8a1136b9f4999f7ff4e657bbb04
The new modes are
MODE_rgbA
MODE_bgrA
MODE_Argb
MODE_rgbA_4444
It's binary incompatible, since the enums changed.
While at it, i removed the now unneeded KeepAlpha methods.
-> Saved ~12k of code!
* made explicit mention that alpha_plane is persistent,
so we have access to the full alpha plane data at all time.
Incremental decoding of alpha was planned for, but not
implemented. So better not dragged this constaint for now
and make the code easier until we revisit that.
Change-Id: Idaba281a6ca819965ca062d1c23329f36d90c7ff
Defining LOCAL_ARM_NEON = true can result in neon instructions being
used in portions unprotected by the cpu check.
This changes defines a WEBP_USE_NEON/WEBP_ANDROID_NEON pair similar to
the SSE2 code and MSVC.
Change-Id: Ifac010b06e42c73d5aca529baa2198c6796674bd
add proper cpu-detection for Android targets
Fixes issue #118 (and is a better solution for #117).
based on patch by pepijn vaneeckhoudt
Change-Id: I6b00ea6d51ca658ccf6a3d55b87b99c01c6805be
* lossless_encoder: (46 commits)
split StoreHuffmanCode() into smaller functions
more consolidation: introduce VP8LHistogramSet
big code clean-up and refactoring and optimization
Some cosmetics in histogram.c
Approximate FastLog between value range [256, 8192]
Forgot to update out_bit_costs to symbol_bit_costs at one instance.
Evaluate output cluster's bit_costs once in HistogramRefine.
Simple Huffman code changes.
Lossless decoder: remove an unneeded param in ReadHuffmanCodeLengths().
Reducing emerging palette size from 11 to 9 bits.
Move GetHistImageSymbols to histogram.c
Improve predict vs no-predict heuristic.
code-moving and clean-up
reduce memory usage by allocating only one histo
Restrict histo_bits to ensure histo_image size is under 32MB
further simplification for the meta-Huffman coding
A quick pass of cleanup in backward reference code
Make transform bits a function of encode method (-m).
introduce -lossless option, protected by USE_LOSSLESS_ENCODER
Run TraceBackwards for higher qualities.
...
Conflicts:
src/enc/webpenc.c
Change-Id: I9a5d98cba0889ea91d10699466939cc283da345a
Profiled data: Profiled few images and found that in the function VP8LFastLog,
90% of time table lookup is performed, while rest of time (10%) call to log
function is made. Typical lookup accounts for 10 CPU instructions and call to
log 200 instruction counts. The weighted average comes out to be 30
instructions per call. For mid qualities (25-75), this function (VP8LFastLog)
accounts for 30-50% of total CPU cycles (via call path: VP8LCOlorSpaceTransform
-> PredictionCostCrossColor -> ShannonEntropy). After this change, the log is
called less that 1% of time, with average instructions being 15 per call.
Measured the performance over 1000 files for various qualities and found
overall compression speedup between 10-15% (in quality range [0, 75]). The
compression density loss is around 0.5% (though at some qualities, compression
is little better as well).
Change-Id: I247bc6a8d4351819c871f19d65455dc23aea8650
make elements of "Multiplier" struct unsigned, so that any negative values are
automatically converted to "mod 256" values.
Change-Id: Iab4f9bacc50dcd94a557944727d9338dbb0982f7
so that it uses original values of left, top etc for prediction rather than the
predicted values of the same. Also, do some renaming in the same to make it
more readable.
Change-Id: I2fe94e35a6700bd437f5c601e2af12323bf32445
- VP8LEncAnalyze, EvalAndApplySubtractGreen, ApplyPredictFilter,
ApplyCrossColorFilter
- Added palette handling and transform buffer management in VP8LEncodeImage()
- Add Transforms (subtract Green, Predict, cross_color) to dsp/lossless.c.
These are more-or-less copied from src/lossless code.
After this Change, will implement the EncodeImageInternal() method.
Change-Id: Idf71f803c24b3b5ae3b5079b15e019721784611d
src/dec/Makefile.am: add missing reference to vp8li.h
src/{dec,dsp,enc}/Makefile.am: move some headers to noinst_
Change-Id: I0e2bc69980bd8175d99ad0ab63f537ef9e425b77
src/dsp/lossless.c: In function 'VP8LInverseTransform':
src/dsp/lossless.c:312:23: warning: 'packed_pixels' may be used
uninitialized in this function [-Wuninitialized]
src/dsp/lossless.c:304:16: note: 'packed_pixels' was declared here
src/dsp/lossless.c:258:34: warning: 'm.red_to_blue_' may be used
uninitialized in this function [-Wuninitialized]
src/dsp/lossless.c:275:17: note: 'm.red_to_blue_' was declared here
src/dsp/lossless.c:257:34: warning: 'm.green_to_blue_' may be used
uninitialized in this function [-Wuninitialized]
src/dsp/lossless.c:275:17: note: 'm.green_to_blue_' was declared here
src/dsp/lossless.c:255:33: warning: 'm.green_to_red_' may be used
uninitialized in this function [-Wuninitialized]
src/dsp/lossless.c:275:17: note: 'm.green_to_red_' was declared here
patch by pepijn vaneeckhoudt
Change-Id: Iffa4764487a75479df45e772169325cd9ee60d94
- use common file organization across subdir makefiles
- append lib/source/header list variables and sort
Change-Id: I0653e1c73a4552b0c43d21f321b22b4972d6e87b
import changes from experimental 5529a2e^
and enable build in autoconf and makefile.unix; windows will be treated
separately.
Change-Id: Ie2e177a99db63190b4cd647b3edee3b4e13719e9
