dany/i2c_puppet-Linux
1
0
Fork 0
mirror of https://github.com/grymoire/i2c_puppet-Linux.git synced 2024-12-26 05:28:22 +01:00
Code Issues Packages Projects Releases Wiki Activity

README improvements

Browse Source
This commit is contained in:
arturo182 2022-05-22 18:15:52 +02:00
parent 28e64926f3
commit 4f4567d10f
1 changed files with 8 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
README.md
View File

@ -192,7 +192,7 @@ When a pin is configured as output, its bit in this register has no effect.
Default value: `0xFF` (all pulls set to pull-up, if enabled in `REG_PUE` and set to input in `REG_DIR`)
## GPIO value register (REG_GIO = 0x0E)
### GPIO value register (REG_GIO = 0x0E)
This register contains the values of the GPIO Expander pins, each bit corresponding to one pin. It is 1 byte in size.
@ -228,9 +228,9 @@ After reading the register, it has to manually be reset to `0x00`.
Default value: `0x00`
### (REG_HLD = 0x11)
### Key hold threshold configuration (REG_HLD = 0x11)
Key hold threshold configuration. This register can be read and written to, it is 1 byte in size.
This register can be read and written to, it is 1 byte in size.
The value of this register (expressed in units of 10ms) is used to determine if a "press and hold" state should be entered.
@ -238,7 +238,7 @@ If a key is held down longer than the value, it enters the "press and hold" stat
Default value: 30 (300ms)
### (REG_ADR = 0x12)
### Device I2C address (REG_ADR = 0x12)
The address that the device shows up on the I2C bus under. This register can be read and written to, it is 1 byte in size.
@ -248,7 +248,7 @@ The address is not saved after a reset.
Default value: `0x1F`
### (REG_IND = 0x13)
### Interrupt duration (REG_IND = 0x13)
The value of this register determines how long the INT/IRQ pin is held LOW after an interrupt event happens.This register can be read and written to, it is 1 byte in size.
@ -256,7 +256,7 @@ The value of this register is expressed in ms.
Default value: 1 (1ms)
### (REG_CF2 = 0x14)
### The configuration register 2 (REG_CF2 = 0x14)
This register can be read and written to, it's 1 byte in size.
@ -277,7 +277,7 @@ See `REG_CFG` for additional settings.
Default value: `CF2_TOUCH_INT | CF2_USB_KEYB_ON | CF2_USB_MOUSE_ON`
### (REG_TOX = 0x15)
### Trackpad X Position(REG_TOX = 0x15)
This is a read-only register, it is 1 byte in size.
@ -291,7 +291,7 @@ It is recommended to read the value of this register often, or data loss might o
Default value: 0
### (REG_TOY = 0x16)
### Trackpad Y position (REG_TOY = 0x16)
This is a read-only register, it is 1 byte in size.