mirror of
				https://xff.cz/git/u-boot/
				synced 2025-10-31 02:15:45 +01:00 
			
		
		
		
	The fsl_dtsec.h & fsl_tgec.h & fsl_fman.h can be shared on both ARM and PPC, move it out of ppc to include/, and change the path in drivers accordingly. Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Signed-off-by: Gong Qianyu <Qianyu.Gong@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
		
			
				
	
	
		
			482 lines
		
	
	
		
			12 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
			
		
		
	
	
			482 lines
		
	
	
		
			12 KiB
		
	
	
	
		
			C
		
	
	
	
	
	
| /*
 | |
|  * Copyright 2009-2011 Freescale Semiconductor, Inc.
 | |
|  *
 | |
|  * SPDX-License-Identifier:	GPL-2.0+
 | |
|  */
 | |
| 
 | |
| #include <common.h>
 | |
| #include <command.h>
 | |
| #include <netdev.h>
 | |
| #include <asm/mmu.h>
 | |
| #include <asm/processor.h>
 | |
| #include <asm/cache.h>
 | |
| #include <asm/immap_85xx.h>
 | |
| #include <asm/fsl_law.h>
 | |
| #include <fsl_ddr_sdram.h>
 | |
| #include <asm/fsl_serdes.h>
 | |
| #include <asm/fsl_portals.h>
 | |
| #include <asm/fsl_liodn.h>
 | |
| #include <malloc.h>
 | |
| #include <fm_eth.h>
 | |
| #include <fsl_mdio.h>
 | |
| #include <miiphy.h>
 | |
| #include <phy.h>
 | |
| 
 | |
| #include "../common/ngpixis.h"
 | |
| #include "../common/fman.h"
 | |
| #include <fsl_dtsec.h>
 | |
| 
 | |
| #define EMI_NONE	0xffffffff
 | |
| #define EMI_MASK	0xf0000000
 | |
| #define EMI1_RGMII	0x0
 | |
| #define EMI1_SLOT3	0x80000000	/* bank1 EFGH */
 | |
| #define EMI1_SLOT4	0x40000000	/* bank2 ABCD */
 | |
| #define EMI1_SLOT5	0xc0000000	/* bank3 ABCD */
 | |
| #define EMI2_SLOT4	0x10000000	/* bank2 ABCD */
 | |
| #define EMI2_SLOT5	0x30000000	/* bank3 ABCD */
 | |
| #define EMI1_MASK	0xc0000000
 | |
| #define EMI2_MASK	0x30000000
 | |
| 
 | |
| #define PHY_BASE_ADDR	0x00
 | |
| #define PHY_BASE_ADDR_SLOT5	0x10
 | |
| 
 | |
| static int mdio_mux[NUM_FM_PORTS];
 | |
| 
 | |
| static char *mdio_names[16] = {
 | |
| 	"P4080DS_MDIO0",
 | |
| 	"P4080DS_MDIO1",
 | |
| 	NULL,
 | |
| 	"P4080DS_MDIO3",
 | |
| 	"P4080DS_MDIO4",
 | |
| 	NULL, NULL, NULL,
 | |
| 	"P4080DS_MDIO8",
 | |
| 	NULL, NULL, NULL,
 | |
| 	"P4080DS_MDIO12",
 | |
| 	NULL, NULL, NULL,
 | |
| };
 | |
| 
 | |
| /*
 | |
|  * Mapping of all 18 SERDES lanes to board slots. A value of '0' here means
 | |
|  * that the mapping must be determined dynamically, or that the lane maps to
 | |
|  * something other than a board slot.
 | |
|  */
 | |
| static u8 lane_to_slot[] = {
 | |
| 	1, 1, 2, 2, 3, 3, 3, 3, 6, 6, 4, 4, 4, 4, 5, 5, 5, 5
 | |
| };
 | |
| 
 | |
| static char *p4080ds_mdio_name_for_muxval(u32 muxval)
 | |
| {
 | |
| 	return mdio_names[(muxval & EMI_MASK) >> 28];
 | |
| }
 | |
| 
 | |
| struct mii_dev *mii_dev_for_muxval(u32 muxval)
 | |
| {
 | |
| 	struct mii_dev *bus;
 | |
| 	char *name = p4080ds_mdio_name_for_muxval(muxval);
 | |
| 
 | |
| 	if (!name) {
 | |
| 		printf("No bus for muxval %x\n", muxval);
 | |
| 		return NULL;
 | |
| 	}
 | |
| 
 | |
| 	bus = miiphy_get_dev_by_name(name);
 | |
| 
 | |
| 	if (!bus) {
 | |
| 		printf("No bus by name %s\n", name);
 | |
| 		return NULL;
 | |
| 	}
 | |
| 
 | |
| 	return bus;
 | |
| }
 | |
| 
 | |
| #if defined(CONFIG_SYS_P4080_ERRATUM_SERDES9) && defined(CONFIG_PHY_TERANETICS)
 | |
| int board_phy_config(struct phy_device *phydev)
 | |
| {
 | |
| 	if (phydev->drv->config)
 | |
| 		phydev->drv->config(phydev);
 | |
| 	if (phydev->drv->uid == PHY_UID_TN2020) {
 | |
| 		unsigned long timeout = 1 * 1000; /* 1 seconds */
 | |
| 		enum srds_prtcl device;
 | |
| 
 | |
| 		/*
 | |
| 		 * Wait for the XAUI to come out of reset.  This is when it
 | |
| 		 * starts transmitting alignment signals.
 | |
| 		 */
 | |
| 		while (--timeout) {
 | |
| 			int reg = phy_read(phydev, MDIO_MMD_PHYXS, MDIO_CTRL1);
 | |
| 			if (reg < 0) {
 | |
| 				printf("TN2020: Error reading from PHY at "
 | |
| 				       "address %u\n", phydev->addr);
 | |
| 				break;
 | |
| 			}
 | |
| 			/*
 | |
| 			 * Note that we've never actually seen
 | |
| 			 * MDIO_CTRL1_RESET set to 1.
 | |
| 			 */
 | |
| 			if ((reg & MDIO_CTRL1_RESET) == 0)
 | |
| 				break;
 | |
| 			udelay(1000);
 | |
| 		}
 | |
| 
 | |
| 		if (!timeout) {
 | |
| 			printf("TN2020: Timeout waiting for PHY at address %u "
 | |
| 			       " to reset.\n", phydev->addr);
 | |
| 		}
 | |
| 
 | |
| 		switch (phydev->addr) {
 | |
| 		case CONFIG_SYS_FM1_10GEC1_PHY_ADDR:
 | |
| 			device = XAUI_FM1;
 | |
| 			break;
 | |
| 		case CONFIG_SYS_FM2_10GEC1_PHY_ADDR:
 | |
| 			device = XAUI_FM2;
 | |
| 			break;
 | |
| 		default:
 | |
| 			device = NONE;
 | |
| 		}
 | |
| 
 | |
| 		serdes_reset_rx(device);
 | |
| 	}
 | |
| 
 | |
| 	return 0;
 | |
| }
 | |
| #endif
 | |
| 
 | |
| struct p4080ds_mdio {
 | |
| 	u32 muxval;
 | |
| 	struct mii_dev *realbus;
 | |
| };
 | |
| 
 | |
| static void p4080ds_mux_mdio(u32 muxval)
 | |
| {
 | |
| 	ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
 | |
| 	uint gpioval = in_be32(&pgpio->gpdat) & ~(EMI_MASK);
 | |
| 	gpioval |= muxval;
 | |
| 
 | |
| 	out_be32(&pgpio->gpdat, gpioval);
 | |
| }
 | |
| 
 | |
| static int p4080ds_mdio_read(struct mii_dev *bus, int addr, int devad,
 | |
| 				int regnum)
 | |
| {
 | |
| 	struct p4080ds_mdio *priv = bus->priv;
 | |
| 
 | |
| 	p4080ds_mux_mdio(priv->muxval);
 | |
| 
 | |
| 	return priv->realbus->read(priv->realbus, addr, devad, regnum);
 | |
| }
 | |
| 
 | |
| static int p4080ds_mdio_write(struct mii_dev *bus, int addr, int devad,
 | |
| 				int regnum, u16 value)
 | |
| {
 | |
| 	struct p4080ds_mdio *priv = bus->priv;
 | |
| 
 | |
| 	p4080ds_mux_mdio(priv->muxval);
 | |
| 
 | |
| 	return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
 | |
| }
 | |
| 
 | |
| static int p4080ds_mdio_reset(struct mii_dev *bus)
 | |
| {
 | |
| 	struct p4080ds_mdio *priv = bus->priv;
 | |
| 
 | |
| 	return priv->realbus->reset(priv->realbus);
 | |
| }
 | |
| 
 | |
| static int p4080ds_mdio_init(char *realbusname, u32 muxval)
 | |
| {
 | |
| 	struct p4080ds_mdio *pmdio;
 | |
| 	struct mii_dev *bus = mdio_alloc();
 | |
| 
 | |
| 	if (!bus) {
 | |
| 		printf("Failed to allocate P4080DS MDIO bus\n");
 | |
| 		return -1;
 | |
| 	}
 | |
| 
 | |
| 	pmdio = malloc(sizeof(*pmdio));
 | |
| 	if (!pmdio) {
 | |
| 		printf("Failed to allocate P4080DS private data\n");
 | |
| 		free(bus);
 | |
| 		return -1;
 | |
| 	}
 | |
| 
 | |
| 	bus->read = p4080ds_mdio_read;
 | |
| 	bus->write = p4080ds_mdio_write;
 | |
| 	bus->reset = p4080ds_mdio_reset;
 | |
| 	sprintf(bus->name, p4080ds_mdio_name_for_muxval(muxval));
 | |
| 
 | |
| 	pmdio->realbus = miiphy_get_dev_by_name(realbusname);
 | |
| 
 | |
| 	if (!pmdio->realbus) {
 | |
| 		printf("No bus with name %s\n", realbusname);
 | |
| 		free(bus);
 | |
| 		free(pmdio);
 | |
| 		return -1;
 | |
| 	}
 | |
| 
 | |
| 	pmdio->muxval = muxval;
 | |
| 	bus->priv = pmdio;
 | |
| 
 | |
| 	return mdio_register(bus);
 | |
| }
 | |
| 
 | |
| void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
 | |
| 				enum fm_port port, int offset)
 | |
| {
 | |
| 	if (mdio_mux[port] == EMI1_RGMII)
 | |
| 		fdt_set_phy_handle(blob, prop, pa, "phy_rgmii");
 | |
| 
 | |
| 	if (mdio_mux[port] == EMI1_SLOT3) {
 | |
| 		int idx = port - FM2_DTSEC1 + 5;
 | |
| 		char phy[16];
 | |
| 
 | |
| 		sprintf(phy, "phy%d_slot3", idx);
 | |
| 
 | |
| 		fdt_set_phy_handle(blob, prop, pa, phy);
 | |
| 	}
 | |
| }
 | |
| 
 | |
| void fdt_fixup_board_enet(void *fdt)
 | |
| {
 | |
| 	int i;
 | |
| 
 | |
| 	/*
 | |
| 	 * P4080DS can be configured in many different ways, supporting a number
 | |
| 	 * of combinations of ethernet devices and phy types.  In order to
 | |
| 	 * have just one device tree for all of those configurations, we fix up
 | |
| 	 * the tree here.  By default, the device tree configures FM1 and FM2
 | |
| 	 * for SGMII, and configures XAUI on both 10G interfaces.  So we have
 | |
| 	 * a number of different variables to track:
 | |
| 	 *
 | |
| 	 * 1) Whether the device is configured at all.  Whichever devices are
 | |
| 	 *    not enabled should be disabled by setting the "status" property
 | |
| 	 *    to "disabled".
 | |
| 	 * 2) What the PHY interface is.  If this is an RGMII connection,
 | |
| 	 *    we should change the "phy-connection-type" property to
 | |
| 	 *    "rgmii"
 | |
| 	 * 3) Which PHY is being used.  Because the MDIO buses are muxed,
 | |
| 	 *    we need to redirect the "phy-handle" property to point at the
 | |
| 	 *    PHY on the right slot/bus.
 | |
| 	 */
 | |
| 
 | |
| 	/* We've got six MDIO nodes that may or may not need to exist */
 | |
| 	fdt_status_disabled_by_alias(fdt, "emi1_slot3");
 | |
| 	fdt_status_disabled_by_alias(fdt, "emi1_slot4");
 | |
| 	fdt_status_disabled_by_alias(fdt, "emi1_slot5");
 | |
| 	fdt_status_disabled_by_alias(fdt, "emi2_slot4");
 | |
| 	fdt_status_disabled_by_alias(fdt, "emi2_slot5");
 | |
| 
 | |
| 	for (i = 0; i < NUM_FM_PORTS; i++) {
 | |
| 		switch (mdio_mux[i]) {
 | |
| 		case EMI1_SLOT3:
 | |
| 			fdt_status_okay_by_alias(fdt, "emi1_slot3");
 | |
| 			break;
 | |
| 		case EMI1_SLOT4:
 | |
| 			fdt_status_okay_by_alias(fdt, "emi1_slot4");
 | |
| 			break;
 | |
| 		case EMI1_SLOT5:
 | |
| 			fdt_status_okay_by_alias(fdt, "emi1_slot5");
 | |
| 			break;
 | |
| 		case EMI2_SLOT4:
 | |
| 			fdt_status_okay_by_alias(fdt, "emi2_slot4");
 | |
| 			break;
 | |
| 		case EMI2_SLOT5:
 | |
| 			fdt_status_okay_by_alias(fdt, "emi2_slot5");
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| }
 | |
| 
 | |
| int board_eth_init(bd_t *bis)
 | |
| {
 | |
| #ifdef CONFIG_FMAN_ENET
 | |
| 	ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR);
 | |
| 	int i;
 | |
| 	struct fsl_pq_mdio_info dtsec_mdio_info;
 | |
| 	struct tgec_mdio_info tgec_mdio_info;
 | |
| 	struct mii_dev *bus;
 | |
| 
 | |
| 	/* Initialize the mdio_mux array so we can recognize empty elements */
 | |
| 	for (i = 0; i < NUM_FM_PORTS; i++)
 | |
| 		mdio_mux[i] = EMI_NONE;
 | |
| 
 | |
| 	/* The first 4 GPIOs are outputs to control MDIO bus muxing */
 | |
| 	out_be32(&pgpio->gpdir, EMI_MASK);
 | |
| 
 | |
| 	dtsec_mdio_info.regs =
 | |
| 		(struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR;
 | |
| 	dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
 | |
| 
 | |
| 	/* Register the 1G MDIO bus */
 | |
| 	fsl_pq_mdio_init(bis, &dtsec_mdio_info);
 | |
| 
 | |
| 	tgec_mdio_info.regs =
 | |
| 		(struct tgec_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR;
 | |
| 	tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
 | |
| 
 | |
| 	/* Register the 10G MDIO bus */
 | |
| 	fm_tgec_mdio_init(bis, &tgec_mdio_info);
 | |
| 
 | |
| 	/* Register the 6 muxing front-ends to the MDIO buses */
 | |
| 	p4080ds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII);
 | |
| 	p4080ds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3);
 | |
| 	p4080ds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4);
 | |
| 	p4080ds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5);
 | |
| 	p4080ds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2_SLOT4);
 | |
| 	p4080ds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2_SLOT5);
 | |
| 
 | |
| 	fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR);
 | |
| 	fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR);
 | |
| 	fm_info_set_phy_address(FM1_DTSEC3, CONFIG_SYS_FM1_DTSEC3_PHY_ADDR);
 | |
| 	fm_info_set_phy_address(FM1_DTSEC4, CONFIG_SYS_FM1_DTSEC4_PHY_ADDR);
 | |
| 	fm_info_set_phy_address(FM1_10GEC1, CONFIG_SYS_FM1_10GEC1_PHY_ADDR);
 | |
| 
 | |
| #if (CONFIG_SYS_NUM_FMAN == 2)
 | |
| 	fm_info_set_phy_address(FM2_DTSEC1, CONFIG_SYS_FM2_DTSEC1_PHY_ADDR);
 | |
| 	fm_info_set_phy_address(FM2_DTSEC2, CONFIG_SYS_FM2_DTSEC2_PHY_ADDR);
 | |
| 	fm_info_set_phy_address(FM2_DTSEC3, CONFIG_SYS_FM2_DTSEC3_PHY_ADDR);
 | |
| 	fm_info_set_phy_address(FM2_DTSEC4, CONFIG_SYS_FM2_DTSEC4_PHY_ADDR);
 | |
| 	fm_info_set_phy_address(FM2_10GEC1, CONFIG_SYS_FM2_10GEC1_PHY_ADDR);
 | |
| #endif
 | |
| 
 | |
| 	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
 | |
| 		int idx = i - FM1_DTSEC1, lane, slot;
 | |
| 		switch (fm_info_get_enet_if(i)) {
 | |
| 		case PHY_INTERFACE_MODE_SGMII:
 | |
| 			lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx);
 | |
| 			if (lane < 0)
 | |
| 				break;
 | |
| 			slot = lane_to_slot[lane];
 | |
| 			switch (slot) {
 | |
| 			case 3:
 | |
| 				mdio_mux[i] = EMI1_SLOT3;
 | |
| 				fm_info_set_mdio(i,
 | |
| 					mii_dev_for_muxval(mdio_mux[i]));
 | |
| 				break;
 | |
| 			case 4:
 | |
| 				mdio_mux[i] = EMI1_SLOT4;
 | |
| 				fm_info_set_mdio(i,
 | |
| 					mii_dev_for_muxval(mdio_mux[i]));
 | |
| 				break;
 | |
| 			case 5:
 | |
| 				mdio_mux[i] = EMI1_SLOT5;
 | |
| 				fm_info_set_mdio(i,
 | |
| 					mii_dev_for_muxval(mdio_mux[i]));
 | |
| 				break;
 | |
| 			};
 | |
| 			break;
 | |
| 		case PHY_INTERFACE_MODE_RGMII:
 | |
| 			fm_info_set_phy_address(i, 0);
 | |
| 			mdio_mux[i] = EMI1_RGMII;
 | |
| 			fm_info_set_mdio(i,
 | |
| 				mii_dev_for_muxval(mdio_mux[i]));
 | |
| 			break;
 | |
| 		default:
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 	bus = mii_dev_for_muxval(EMI1_SLOT5);
 | |
| 	set_sgmii_phy(bus, FM1_DTSEC1,
 | |
| 		      CONFIG_SYS_NUM_FM1_DTSEC, PHY_BASE_ADDR_SLOT5);
 | |
| 
 | |
| 	for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
 | |
| 		int idx = i - FM1_10GEC1, lane, slot;
 | |
| 		switch (fm_info_get_enet_if(i)) {
 | |
| 		case PHY_INTERFACE_MODE_XGMII:
 | |
| 			lane = serdes_get_first_lane(XAUI_FM1 + idx);
 | |
| 			if (lane < 0)
 | |
| 				break;
 | |
| 			slot = lane_to_slot[lane];
 | |
| 			switch (slot) {
 | |
| 			case 4:
 | |
| 				mdio_mux[i] = EMI2_SLOT4;
 | |
| 				fm_info_set_mdio(i,
 | |
| 					mii_dev_for_muxval(mdio_mux[i]));
 | |
| 				break;
 | |
| 			case 5:
 | |
| 				mdio_mux[i] = EMI2_SLOT5;
 | |
| 				fm_info_set_mdio(i,
 | |
| 					mii_dev_for_muxval(mdio_mux[i]));
 | |
| 				break;
 | |
| 			};
 | |
| 			break;
 | |
| 		default:
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| #if (CONFIG_SYS_NUM_FMAN == 2)
 | |
| 	for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
 | |
| 		int idx = i - FM2_DTSEC1, lane, slot;
 | |
| 		switch (fm_info_get_enet_if(i)) {
 | |
| 		case PHY_INTERFACE_MODE_SGMII:
 | |
| 			lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx);
 | |
| 			if (lane < 0)
 | |
| 				break;
 | |
| 			slot = lane_to_slot[lane];
 | |
| 			switch (slot) {
 | |
| 			case 3:
 | |
| 				mdio_mux[i] = EMI1_SLOT3;
 | |
| 				fm_info_set_mdio(i,
 | |
| 					mii_dev_for_muxval(mdio_mux[i]));
 | |
| 				break;
 | |
| 			case 4:
 | |
| 				mdio_mux[i] = EMI1_SLOT4;
 | |
| 				fm_info_set_mdio(i,
 | |
| 					mii_dev_for_muxval(mdio_mux[i]));
 | |
| 				break;
 | |
| 			case 5:
 | |
| 				mdio_mux[i] = EMI1_SLOT5;
 | |
| 				fm_info_set_mdio(i,
 | |
| 					mii_dev_for_muxval(mdio_mux[i]));
 | |
| 				break;
 | |
| 			};
 | |
| 			break;
 | |
| 		case PHY_INTERFACE_MODE_RGMII:
 | |
| 			fm_info_set_phy_address(i, 0);
 | |
| 			mdio_mux[i] = EMI1_RGMII;
 | |
| 			fm_info_set_mdio(i,
 | |
| 				mii_dev_for_muxval(mdio_mux[i]));
 | |
| 			break;
 | |
| 		default:
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| 
 | |
| 	bus = mii_dev_for_muxval(EMI1_SLOT3);
 | |
| 	set_sgmii_phy(bus, FM2_DTSEC1, CONFIG_SYS_NUM_FM2_DTSEC, PHY_BASE_ADDR);
 | |
| 	bus = mii_dev_for_muxval(EMI1_SLOT4);
 | |
| 	set_sgmii_phy(bus, FM2_DTSEC1, CONFIG_SYS_NUM_FM2_DTSEC, PHY_BASE_ADDR);
 | |
| 
 | |
| 	for (i = FM2_10GEC1; i < FM2_10GEC1 + CONFIG_SYS_NUM_FM2_10GEC; i++) {
 | |
| 		int idx = i - FM2_10GEC1, lane, slot;
 | |
| 		switch (fm_info_get_enet_if(i)) {
 | |
| 		case PHY_INTERFACE_MODE_XGMII:
 | |
| 			lane = serdes_get_first_lane(XAUI_FM2 + idx);
 | |
| 			if (lane < 0)
 | |
| 				break;
 | |
| 			slot = lane_to_slot[lane];
 | |
| 			switch (slot) {
 | |
| 			case 4:
 | |
| 				mdio_mux[i] = EMI2_SLOT4;
 | |
| 				fm_info_set_mdio(i,
 | |
| 					mii_dev_for_muxval(mdio_mux[i]));
 | |
| 				break;
 | |
| 			case 5:
 | |
| 				mdio_mux[i] = EMI2_SLOT5;
 | |
| 				fm_info_set_mdio(i,
 | |
| 					mii_dev_for_muxval(mdio_mux[i]));
 | |
| 				break;
 | |
| 			};
 | |
| 			break;
 | |
| 		default:
 | |
| 			break;
 | |
| 		}
 | |
| 	}
 | |
| #endif
 | |
| 
 | |
| 	cpu_eth_init(bis);
 | |
| #endif /* CONFIG_FMAN_ENET */
 | |
| 
 | |
| 	return pci_eth_init(bis);
 | |
| }
 |